iwlwifi: automatically adjust sleep level

Depending on required latency requested by pm_qos (via mac80211)
we can automatically adjust the sleep state. Also, mac80211 has
a user-visible dynamic sleep feature where we are supposed to
stay awake after sending/receiving frames to better receive
response frames to our packets, this can be integrated into the
sleep command.

Currently, and this patch doesn't change that yet, we default
to using sleep level 1 if PS is enabled. With a module parameter
to iwlcore, automatic adjustment to changing network latency
requirements can be enabled -- this isn't yet the default due
to requiring more testing.

The goal is to enable automatic adjustment and then go into the
deepest possible sleep state possible depending on the networking
latency requirements.

This patch does, however, enable IEEE80211_HW_SUPPORTS_DYNAMIC_PS
to avoid the double-timer (one in software and one in the device)
when transmitting -- the exact timeout may be ignored but that is
not of big concern.

Note also that we keep the hard-coded power indices around for
thermal throttling -- the specification of that calls for using
the specified power levels. Those can also be selected in debugfs
to allow easier testing of such parameters.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 6 insertions, 24 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h
index 15e3eab..df6f6a4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.h
+++ b/drivers/net/wireless/iwlwifi/iwl-power.h
@@ -28,11 +28,8 @@
 #ifndef __iwl_power_setting_h__
 #define __iwl_power_setting_h__
 
-#include <net/mac80211.h>
 #include "iwl-commands.h"
 
-struct iwl_priv;
-
 #define IWL_ABSOLUTE_ZERO		0
 #define IWL_ABSOLUTE_MAX		0xFFFFFFFF
 #define IWL_TT_INCREASE_MARGIN	5
@@ -93,8 +90,6 @@ struct iwl_tt_trans {
  * 		    when thermal throttling state != IWL_TI_0
  *		    the tt_power_mode should set to different
  *		    power mode based on the current tt state
- * @sys_power_mode: previous system power mode
- *                  before transition into TT state
  * @tt_previous_temperature: last measured temperature
  * @iwl_tt_restriction: ptr to restriction tbl, used by advance
  *		    thermal throttling to determine how many tx/rx streams
@@ -108,7 +103,6 @@ struct iwl_tt_mgmt {
 	enum iwl_tt_state state;
 	bool advanced_tt;
 	u8 tt_power_mode;
-	u8 sys_power_mode;
 	bool ct_kill_toggle;
 #ifdef CONFIG_IWLWIFI_DEBUG
 	s32 tt_previous_temp;
@@ -118,8 +112,7 @@ struct iwl_tt_mgmt {
 	struct timer_list ct_kill_exit_tm;
 };
 
-enum {
-	IWL_POWER_MODE_CAM, /* Continuously Aware Mode, always on */
+enum iwl_power_level {
 	IWL_POWER_INDEX_1,
 	IWL_POWER_INDEX_2,
 	IWL_POWER_INDEX_3,
@@ -128,26 +121,13 @@ enum {
 	IWL_POWER_NUM
 };
 
-/* Power management (not Tx power) structures */
-
-struct iwl_power_vec_entry {
-	struct iwl_powertable_cmd cmd;
-	u8 no_dtim;
-};
-
 struct iwl_power_mgr {
-	struct iwl_power_vec_entry pwr_range_0[IWL_POWER_NUM];
-	struct iwl_power_vec_entry pwr_range_1[IWL_POWER_NUM];
-	struct iwl_power_vec_entry pwr_range_2[IWL_POWER_NUM];
-	u32 dtim_period;
-	/* final power level that used to calculate final power command */
-	u8 power_mode;
-	u8 user_power_setting; /* set by user through sysfs */
-	u8 power_disabled; /* set by mac80211's CONF_PS */
+	struct iwl_powertable_cmd sleep_cmd;
+	int debug_sleep_level_override;
+	bool pci_pm;
 };
 
 int iwl_power_update_mode(struct iwl_priv *priv, bool force);
-int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode);
 bool iwl_ht_enabled(struct iwl_priv *priv);
 enum iwl_antenna_ok iwl_tx_ant_restriction(struct iwl_priv *priv);
 enum iwl_antenna_ok iwl_rx_ant_restriction(struct iwl_priv *priv);
@@ -158,4 +138,6 @@ void iwl_tt_initialize(struct iwl_priv *priv);
 void iwl_tt_exit(struct iwl_priv *priv);
 void iwl_power_initialize(struct iwl_priv *priv);
 
+extern bool no_sleep_autoadjust;
+
 #endif  /* __iwl_power_setting_h__ */