Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: avoid buffer overflow in pcmcia_setup_isa_irq
  pcmcia: do not request windows if you don't need to
  pcmcia: insert PCMCIA device resources into resource tree
  pcmcia: export resource information to sysfs
  pcmcia: use struct resource for PCMCIA devices, part 2
  pcmcia: remove memreq_t
  pcmcia: move local definitions out of include/pcmcia/cs.h
  pcmcia: do not use io_req_t when calling pcmcia_request_io()
  pcmcia: do not use io_req_t after call to pcmcia_request_io()
  pcmcia: use struct resource for PCMCIA devices
  pcmcia: clean up cs.h
  pcmcia: use pcmica_{read,write}_config_byte
  pcmcia: remove cs_types.h
  pcmcia: remove unused flag, simplify headers
  pcmcia: remove obsolete CS_EVENT_ definitions
  pcmcia: split up central event handler
  pcmcia: simplify event callback
  pcmcia: remove obsolete ioctl

Conflicts in:
 - drivers/staging/comedi/drivers/*
 - drivers/staging/wlags49_h2/wl_cs.c
due to dev_info_t and whitespace changes

19 files changed, 311 insertions, 497 deletions

diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 10ee106..c683f77 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -87,7 +87,6 @@ earlier 3Com products.
 #include <linux/bitops.h>
 #include <linux/mii.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -279,8 +278,8 @@ static int tc574_probe(struct pcmcia_device *link)
 	lp->p_dev = link;
 
 	spin_lock_init(&lp->window_lock);
-	link->io.NumPorts1 = 32;
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+	link->resource[0]->end = 32;
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 	link->conf.ConfigIndex = 1;
@@ -338,10 +337,11 @@ static int tc574_config(struct pcmcia_device *link)
 
 	dev_dbg(&link->dev, "3c574_config()\n");
 
-	link->io.IOAddrLines = 16;
+	link->io_lines = 16;
+
 	for (i = j = 0; j < 0x400; j += 0x20) {
-		link->io.BasePort1 = j ^ 0x300;
-		i = pcmcia_request_io(link, &link->io);
+		link->resource[0]->start = j ^ 0x300;
+		i = pcmcia_request_io(link);
 		if (i == 0)
 			break;
 	}
@@ -357,7 +357,7 @@ static int tc574_config(struct pcmcia_device *link)
 		goto failed;
 
 	dev->irq = link->irq;
-	dev->base_addr = link->io.BasePort1;
+	dev->base_addr = link->resource[0]->start;
 
 	ioaddr = dev->base_addr;
 
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index ce63c37..61f9cf2 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -41,7 +41,6 @@
 #include <linux/bitops.h>
 #include <linux/jiffies.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -214,8 +213,8 @@ static int tc589_probe(struct pcmcia_device *link)
     lp->p_dev = link;
 
     spin_lock_init(&lp->lock);
-    link->io.NumPorts1 = 16;
-    link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+    link->resource[0]->end = 16;
+    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
 
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
@@ -278,12 +277,13 @@ static int tc589_config(struct pcmcia_device *link)
 		   "3Com card??\n");
     multi = (link->card_id == PRODID_3COM_3C562);
 
+    link->io_lines = 16;
+
     /* For the 3c562, the base address must be xx00-xx7f */
-    link->io.IOAddrLines = 16;
     for (i = j = 0; j < 0x400; j += 0x10) {
 	if (multi && (j & 0x80)) continue;
-	link->io.BasePort1 = j ^ 0x300;
-	i = pcmcia_request_io(link, &link->io);
+	link->resource[0]->start = j ^ 0x300;
+	i = pcmcia_request_io(link);
 	if (i == 0)
 		break;
     }
@@ -299,7 +299,7 @@ static int tc589_config(struct pcmcia_device *link)
 	    goto failed;
 
     dev->irq = link->irq;
-    dev->base_addr = link->io.BasePort1;
+    dev->base_addr = link->resource[0]->start;
     ioaddr = dev->base_addr;
     EL3WINDOW(0);
 
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 33525bf..5f05ffb 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -39,7 +39,6 @@
 #include <linux/mii.h>
 #include "../8390.h"
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
@@ -260,28 +259,30 @@ static int get_prom(struct pcmcia_device *link)
 static int try_io_port(struct pcmcia_device *link)
 {
     int j, ret;
-    if (link->io.NumPorts1 == 32) {
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+    link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+    link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+    if (link->resource[0]->end == 32) {
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 	/* for master/slave multifunction cards */
-	if (link->io.NumPorts2 > 0)
-	    link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+	if (link->resource[1]->end > 0)
+	    link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
     } else {
 	/* This should be two 16-port windows */
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-	link->io.Attributes2 = IO_DATA_PATH_WIDTH_16;
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+	link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16;
     }
-    if (link->io.BasePort1 == 0) {
-	link->io.IOAddrLines = 16;
+    if (link->resource[0]->start == 0) {
 	for (j = 0; j < 0x400; j += 0x20) {
-	    link->io.BasePort1 = j ^ 0x300;
-	    link->io.BasePort2 = (j ^ 0x300) + 0x10;
-	    ret = pcmcia_request_io(link, &link->io);
+	    link->resource[0]->start = j ^ 0x300;
+	    link->resource[1]->start = (j ^ 0x300) + 0x10;
+	    link->io_lines = 16;
+	    ret = pcmcia_request_io(link);
 	    if (ret == 0)
 		    return ret;
 	}
 	return ret;
     } else {
-	return pcmcia_request_io(link, &link->io);
+	return pcmcia_request_io(link);
     }
 }
 
@@ -302,15 +303,15 @@ static int axnet_configcheck(struct pcmcia_device *p_dev,
 	   network function with window 0, and serial with window 1 */
 	if (io->nwin > 1) {
 		i = (io->win[1].len > io->win[0].len);
-		p_dev->io.BasePort2 = io->win[1-i].base;
-		p_dev->io.NumPorts2 = io->win[1-i].len;
+		p_dev->resource[1]->start = io->win[1-i].base;
+		p_dev->resource[1]->end = io->win[1-i].len;
 	} else {
-		i = p_dev->io.NumPorts2 = 0;
+		i = p_dev->resource[1]->end = 0;
 	}
-	p_dev->io.BasePort1 = io->win[i].base;
-	p_dev->io.NumPorts1 = io->win[i].len;
-	p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-	if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32)
+	p_dev->resource[0]->start = io->win[i].base;
+	p_dev->resource[0]->end = io->win[i].len;
+	p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+	if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32)
 		return try_io_port(p_dev);
 
 	return -ENODEV;
@@ -333,7 +334,7 @@ static int axnet_config(struct pcmcia_device *link)
     if (!link->irq)
 	    goto failed;
     
-    if (link->io.NumPorts2 == 8) {
+    if (resource_size(link->resource[1]) == 8) {
 	link->conf.Attributes |= CONF_ENABLE_SPKR;
 	link->conf.Status = CCSR_AUDIO_ENA;
     }
@@ -343,7 +344,7 @@ static int axnet_config(struct pcmcia_device *link)
 	    goto failed;
 
     dev->irq = link->irq;
-    dev->base_addr = link->io.BasePort1;
+    dev->base_addr = link->resource[0]->start;
 
     if (!get_prom(link)) {
 	printk(KERN_NOTICE "axnet_cs: this is not an AX88190 card!\n");
@@ -379,8 +380,7 @@ static int axnet_config(struct pcmcia_device *link)
     /* Maybe PHY is in power down mode. (PPD_SET = 1) 
        Bit 2 of CCSR is active low. */ 
     if (i == 32) {
-	conf_reg_t reg = { 0, CS_WRITE, CISREG_CCSR, 0x04 };
- 	pcmcia_access_configuration_register(link, &reg);
+	pcmcia_write_config_byte(link, CISREG_CCSR, 0x04);
 	for (i = 0; i < 32; i++) {
 	    j = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 1);
 	    j2 = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 2);
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index 5643f94..3c400cf 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -43,7 +43,6 @@
 #include <linux/arcdevice.h>
 #include <linux/com20020.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
@@ -159,9 +158,8 @@ static int com20020_probe(struct pcmcia_device *p_dev)
     /* fill in our module parameters as defaults */
     dev->dev_addr[0] = node;
 
-    p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-    p_dev->io.NumPorts1 = 16;
-    p_dev->io.IOAddrLines = 16;
+    p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+    p_dev->resource[0]->end = 16;
     p_dev->conf.Attributes = CONF_ENABLE_IRQ;
     p_dev->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -246,20 +244,24 @@ static int com20020_config(struct pcmcia_device *link)
 
     dev_dbg(&link->dev, "com20020_config\n");
 
-    dev_dbg(&link->dev, "baseport1 is %Xh\n", link->io.BasePort1);
+    dev_dbg(&link->dev, "baseport1 is %Xh\n",
+	    (unsigned int) link->resource[0]->start);
+
     i = -ENODEV;
-    if (!link->io.BasePort1)
+    link->io_lines = 16;
+
+    if (!link->resource[0]->start)
     {
 	for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10)
 	{
-	    link->io.BasePort1 = ioaddr;
-	    i = pcmcia_request_io(link, &link->io);
+	    link->resource[0]->start = ioaddr;
+	    i = pcmcia_request_io(link);
 	    if (i == 0)
 		break;
 	}
     }
     else
-	i = pcmcia_request_io(link, &link->io);
+	i = pcmcia_request_io(link);
     
     if (i != 0)
     {
@@ -267,7 +269,7 @@ static int com20020_config(struct pcmcia_device *link)
 	goto failed;
     }
 	
-    ioaddr = dev->base_addr = link->io.BasePort1;
+    ioaddr = dev->base_addr = link->resource[0]->start;
     dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
 
     dev_dbg(&link->dev, "request IRQ %d\n",
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 7c27c50..98fffb0 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -49,7 +49,6 @@
 #include <linux/ioport.h>
 #include <linux/crc32.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
@@ -249,9 +248,8 @@ static int fmvj18x_probe(struct pcmcia_device *link)
     lp->base = NULL;
 
     /* The io structure describes IO port mapping */
-    link->io.NumPorts1 = 32;
-    link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-    link->io.IOAddrLines = 5;
+    link->resource[0]->end = 32;
+    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 
     /* General socket configuration */
     link->conf.Attributes = CONF_ENABLE_IRQ;
@@ -289,13 +287,13 @@ static int mfc_try_io_port(struct pcmcia_device *link)
 	{ 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
 
     for (i = 0; i < 5; i++) {
-	link->io.BasePort2 = serial_base[i];
-	link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
-	if (link->io.BasePort2 == 0) {
-	    link->io.NumPorts2 = 0;
+	link->resource[1]->start = serial_base[i];
+	link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+	if (link->resource[1]->start == 0) {
+	    link->resource[1]->end = 0;
 	    printk(KERN_NOTICE "fmvj18x_cs: out of resource for serial\n");
 	}
-	ret = pcmcia_request_io(link, &link->io);
+	ret = pcmcia_request_io(link);
 	if (ret == 0)
 		return ret;
     }
@@ -311,12 +309,12 @@ static int ungermann_try_io_port(struct pcmcia_device *link)
 	0x380,0x3c0 only for ioport.
     */
     for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) {
-	link->io.BasePort1 = ioaddr;
-	ret = pcmcia_request_io(link, &link->io);
+	link->resource[0]->start = ioaddr;
+	ret = pcmcia_request_io(link);
 	if (ret == 0) {
 	    /* calculate ConfigIndex value */
 	    link->conf.ConfigIndex = 
-		((link->io.BasePort1 & 0x0f0) >> 3) | 0x22;
+		((link->resource[0]->start & 0x0f0) >> 3) | 0x22;
 	    return ret;
 	}
     }
@@ -346,6 +344,8 @@ static int fmvj18x_config(struct pcmcia_device *link)
 
     dev_dbg(&link->dev, "fmvj18x_config\n");
 
+    link->io_lines = 5;
+
     len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
     kfree(buf);
 
@@ -364,20 +364,20 @@ static int fmvj18x_config(struct pcmcia_device *link)
 		/* MultiFunction Card */
 		link->conf.ConfigBase = 0x800;
 		link->conf.ConfigIndex = 0x47;
-		link->io.NumPorts2 = 8;
+		link->resource[1]->end = 8;
 	    }
 	    break;
 	case MANFID_NEC:
 	    cardtype = NEC; /* MultiFunction Card */
 	    link->conf.ConfigBase = 0x800;
 	    link->conf.ConfigIndex = 0x47;
-	    link->io.NumPorts2 = 8;
+	    link->resource[1]->end = 8;
 	    break;
 	case MANFID_KME:
 	    cardtype = KME; /* MultiFunction Card */
 	    link->conf.ConfigBase = 0x800;
 	    link->conf.ConfigIndex = 0x47;
-	    link->io.NumPorts2 = 8;
+	    link->resource[1]->end = 8;
 	    break;
 	case MANFID_CONTEC:
 	    cardtype = CONTEC;
@@ -418,14 +418,14 @@ static int fmvj18x_config(struct pcmcia_device *link)
 	}
     }
 
-    if (link->io.NumPorts2 != 0) {
+    if (link->resource[1]->end != 0) {
 	ret = mfc_try_io_port(link);
 	if (ret != 0) goto failed;
     } else if (cardtype == UNGERMANN) {
 	ret = ungermann_try_io_port(link);
 	if (ret != 0) goto failed;
     } else { 
-	    ret = pcmcia_request_io(link, &link->io);
+	    ret = pcmcia_request_io(link);
 	    if (ret)
 		    goto failed;
     }
@@ -437,9 +437,9 @@ static int fmvj18x_config(struct pcmcia_device *link)
 	    goto failed;
 
     dev->irq = link->irq;
-    dev->base_addr = link->io.BasePort1;
+    dev->base_addr = link->resource[0]->start;
 
-    if (link->io.BasePort2 != 0) {
+    if (resource_size(link->resource[1]) != 0) {
 	ret = fmvj18x_setup_mfc(link);
 	if (ret != 0) goto failed;
     }
@@ -545,7 +545,6 @@ failed:
 static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
 {
     win_req_t req;
-    memreq_t mem;
     u_char __iomem *base;
     int i, j;
 
@@ -558,9 +557,7 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
 	return -1;
 
     base = ioremap(req.Base, req.Size);
-    mem.Page = 0;
-    mem.CardOffset = 0;
-    pcmcia_map_mem_page(link, link->win, &mem);
+    pcmcia_map_mem_page(link, link->win, 0);
 
     /*
      *  MBH10304 CISTPL_FUNCE_LAN_NODE_ID format
@@ -594,7 +591,6 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
 static int fmvj18x_setup_mfc(struct pcmcia_device *link)
 {
     win_req_t req;
-    memreq_t mem;
     int i;
     struct net_device *dev = link->priv;
     unsigned int ioaddr;
@@ -614,9 +610,7 @@ static int fmvj18x_setup_mfc(struct pcmcia_device *link)
 	return -1;
     }
 
-    mem.Page = 0;
-    mem.CardOffset = 0;
-    i = pcmcia_map_mem_page(link, link->win, &mem);
+    i = pcmcia_map_mem_page(link, link->win, 0);
     if (i != 0) {
 	iounmap(lp->base);
 	lp->base = NULL;
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index 67ee985..b0d06a3 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -57,7 +57,6 @@
 #include <linux/trdevice.h>
 #include <linux/ibmtr.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
@@ -152,9 +151,8 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link)
     link->priv = info;
     info->ti = netdev_priv(dev);
 
-    link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-    link->io.NumPorts1 = 4;
-    link->io.IOAddrLines = 16;
+    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+    link->resource[0]->end = 4;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.Present = PRESENT_OPTION;
@@ -213,26 +211,26 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
     struct net_device *dev = info->dev;
     struct tok_info *ti = netdev_priv(dev);
     win_req_t req;
-    memreq_t mem;
     int i, ret;
 
     dev_dbg(&link->dev, "ibmtr_config\n");
 
     link->conf.ConfigIndex = 0x61;
+    link->io_lines = 16;
 
     /* Determine if this is PRIMARY or ALTERNATE. */
 
     /* Try PRIMARY card at 0xA20-0xA23 */
-    link->io.BasePort1 = 0xA20;
-    i = pcmcia_request_io(link, &link->io);
+    link->resource[0]->start = 0xA20;
+    i = pcmcia_request_io(link);
     if (i != 0) {
 	/* Couldn't get 0xA20-0xA23.  Try ALTERNATE at 0xA24-0xA27. */
-	link->io.BasePort1 = 0xA24;
-	ret = pcmcia_request_io(link, &link->io);
+	link->resource[0]->start = 0xA24;
+	ret = pcmcia_request_io(link);
 	if (ret)
 		goto failed;
     }
-    dev->base_addr = link->io.BasePort1;
+    dev->base_addr = link->resource[0]->start;
 
     ret = pcmcia_request_exclusive_irq(link, ibmtr_interrupt);
     if (ret)
@@ -251,9 +249,7 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
     if (ret)
 	    goto failed;
 
-    mem.CardOffset = mmiobase;
-    mem.Page = 0;
-    ret = pcmcia_map_mem_page(link, link->win, &mem);
+    ret = pcmcia_map_mem_page(link, link->win, mmiobase);
     if (ret)
 	    goto failed;
     ti->mmio = ioremap(req.Base, req.Size);
@@ -268,13 +264,11 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
     if (ret)
 	    goto failed;
 
-    mem.CardOffset = srambase;
-    mem.Page = 0;
-    ret = pcmcia_map_mem_page(link, info->sram_win_handle, &mem);
+    ret = pcmcia_map_mem_page(link, info->sram_win_handle, srambase);
     if (ret)
 	    goto failed;
 
-    ti->sram_base = mem.CardOffset >> 12;
+    ti->sram_base = srambase >> 12;
     ti->sram_virt = ioremap(req.Base, req.Size);
     ti->sram_phys = req.Base;
 
@@ -325,7 +319,6 @@ static void ibmtr_release(struct pcmcia_device *link)
 	if (link->win) {
 		struct tok_info *ti = netdev_priv(dev);
 		iounmap(ti->mmio);
-		pcmcia_release_window(link, info->sram_win_handle);
 	}
 	pcmcia_disable_device(link);
 }
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 9b63dec..68f2dee 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -146,7 +146,6 @@ Include Files
 #include <linux/ioport.h>
 #include <linux/bitops.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/cistpl.h>
@@ -459,9 +458,8 @@ static int nmclan_probe(struct pcmcia_device *link)
     link->priv = dev;
     
     spin_lock_init(&lp->bank_lock);
-    link->io.NumPorts1 = 32;
-    link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-    link->io.IOAddrLines = 5;
+    link->resource[0]->end = 32;
+    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
@@ -645,7 +643,8 @@ static int nmclan_config(struct pcmcia_device *link)
 
   dev_dbg(&link->dev, "nmclan_config\n");
 
-  ret = pcmcia_request_io(link, &link->io);
+  link->io_lines = 5;
+  ret = pcmcia_request_io(link);
   if (ret)
 	  goto failed;
   ret = pcmcia_request_exclusive_irq(link, mace_interrupt);
@@ -656,7 +655,7 @@ static int nmclan_config(struct pcmcia_device *link)
 	  goto failed;
 
   dev->irq = link->irq;
-  dev->base_addr = link->io.BasePort1;
+  dev->base_addr = link->resource[0]->start;
 
   ioaddr = dev->base_addr;
 
@@ -758,29 +757,20 @@ static void nmclan_reset(struct net_device *dev)
 
 #if RESET_XILINX
   struct pcmcia_device *link = &lp->link;
-  conf_reg_t reg;
-  u_long OrigCorValue; 
+  u8 OrigCorValue;
 
   /* Save original COR value */
-  reg.Function = 0;
-  reg.Action = CS_READ;
-  reg.Offset = CISREG_COR;
-  reg.Value = 0;
-  pcmcia_access_configuration_register(link, &reg);
-  OrigCorValue = reg.Value;
+  pcmcia_read_config_byte(link, CISREG_COR, &OrigCorValue);
 
   /* Reset Xilinx */
-  reg.Action = CS_WRITE;
-  reg.Offset = CISREG_COR;
-  dev_dbg(&link->dev, "nmclan_reset: OrigCorValue=0x%lX, resetting...\n",
+  dev_dbg(&link->dev, "nmclan_reset: OrigCorValue=0x%x, resetting...\n",
 	OrigCorValue);
-  reg.Value = COR_SOFT_RESET;
-  pcmcia_access_configuration_register(link, &reg);
+  pcmcia_write_config_byte(link, CISREG_COR, COR_SOFT_RESET);
   /* Need to wait for 20 ms for PCMCIA to finish reset. */
 
   /* Restore original COR configuration index */
-  reg.Value = COR_LEVEL_REQ | (OrigCorValue & COR_CONFIG_MASK);
-  pcmcia_access_configuration_register(link, &reg);
+  pcmcia_write_config_byte(link, CISREG_COR,
+			  (COR_LEVEL_REQ | (OrigCorValue & COR_CONFIG_MASK)));
   /* Xilinx is now completely reset along with the MACE chip. */
   lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
 
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index bfdef72..c3edfe4 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -42,7 +42,6 @@
 #include <linux/mii.h>
 #include "../8390.h"
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
@@ -113,8 +112,6 @@ static int setup_dma_config(struct pcmcia_device *link, int start_pg,
 
 static void pcnet_detach(struct pcmcia_device *p_dev);
 
-static dev_info_t dev_info = "pcnet_cs";
-
 /*====================================================================*/
 
 typedef struct hw_info_t {
@@ -304,7 +301,6 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link)
 {
     struct net_device *dev = link->priv;
     win_req_t req;
-    memreq_t mem;
     u_char __iomem *base, *virt;
     int i, j;
 
@@ -317,10 +313,8 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link)
 	return NULL;
 
     virt = ioremap(req.Base, req.Size);
-    mem.Page = 0;
     for (i = 0; i < NR_INFO; i++) {
-	mem.CardOffset = hw_info[i].offset & ~(req.Size-1);
-	pcmcia_map_mem_page(link, link->win, &mem);
+	pcmcia_map_mem_page(link, link->win, hw_info[i].offset & ~(req.Size-1));
 	base = &virt[hw_info[i].offset & (req.Size-1)];
 	if ((readb(base+0) == hw_info[i].a0) &&
 	    (readb(base+2) == hw_info[i].a1) &&
@@ -480,29 +474,31 @@ static hw_info_t *get_hwired(struct pcmcia_device *link)
 static int try_io_port(struct pcmcia_device *link)
 {
     int j, ret;
-    if (link->io.NumPorts1 == 32) {
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-	if (link->io.NumPorts2 > 0) {
+    link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+    link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+    if (link->resource[0]->end == 32) {
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+	if (link->resource[1]->end > 0) {
 	    /* for master/slave multifunction cards */
-	    link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+	    link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
 	}
     } else {
 	/* This should be two 16-port windows */
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-	link->io.Attributes2 = IO_DATA_PATH_WIDTH_16;
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+	link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16;
     }
-    if (link->io.BasePort1 == 0) {
-	link->io.IOAddrLines = 16;
+    if (link->resource[0]->start == 0) {
 	for (j = 0; j < 0x400; j += 0x20) {
-	    link->io.BasePort1 = j ^ 0x300;
-	    link->io.BasePort2 = (j ^ 0x300) + 0x10;
-	    ret = pcmcia_request_io(link, &link->io);
+	    link->resource[0]->start = j ^ 0x300;
+	    link->resource[1]->start = (j ^ 0x300) + 0x10;
+	    link->io_lines = 16;
+	    ret = pcmcia_request_io(link);
 	    if (ret == 0)
 		    return ret;
 	}
 	return ret;
     } else {
-	return pcmcia_request_io(link, &link->io);
+	return pcmcia_request_io(link);
     }
 }
 
@@ -523,18 +519,18 @@ static int pcnet_confcheck(struct pcmcia_device *p_dev,
 	   network function with window 0, and serial with window 1 */
 	if (io->nwin > 1) {
 		i = (io->win[1].len > io->win[0].len);
-		p_dev->io.BasePort2 = io->win[1-i].base;
-		p_dev->io.NumPorts2 = io->win[1-i].len;
+		p_dev->resource[1]->start = io->win[1-i].base;
+		p_dev->resource[1]->end = io->win[1-i].len;
 	} else {
-		i = p_dev->io.NumPorts2 = 0;
+		i = p_dev->resource[1]->end = 0;
 	}
 
 	*has_shmem = ((cfg->mem.nwin == 1) &&
 		      (cfg->mem.win[0].len >= 0x4000));
-	p_dev->io.BasePort1 = io->win[i].base;
-	p_dev->io.NumPorts1 = io->win[i].len;
-	p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-	if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32)
+	p_dev->resource[0]->start = io->win[i].base;
+	p_dev->resource[0]->end = io->win[i].len;
+	p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+	if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32)
 		return try_io_port(p_dev);
 
 	return 0;
@@ -557,7 +553,7 @@ static int pcnet_config(struct pcmcia_device *link)
     if (!link->irq)
 	    goto failed;
 
-    if (link->io.NumPorts2 == 8) {
+    if (resource_size(link->resource[1]) == 8) {
 	link->conf.Attributes |= CONF_ENABLE_SPKR;
 	link->conf.Status = CCSR_AUDIO_ENA;
     }
@@ -569,7 +565,7 @@ static int pcnet_config(struct pcmcia_device *link)
     if (ret)
 	    goto failed;
     dev->irq = link->irq;
-    dev->base_addr = link->io.BasePort1;
+    dev->base_addr = link->resource[0]->start;
     if (info->flags & HAS_MISC_REG) {
 	if ((if_port == 1) || (if_port == 2))
 	    dev->if_port = if_port;
@@ -956,7 +952,7 @@ static int pcnet_open(struct net_device *dev)
     set_misc_reg(dev);
 
     outb_p(0xFF, nic_base + EN0_ISR); /* Clear bogus intr. */
-    ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev_info, dev);
+    ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev->name, dev);
     if (ret)
 	    return ret;
 
@@ -1464,7 +1460,6 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg,
     struct net_device *dev = link->priv;
     pcnet_dev_t *info = PRIV(dev);
     win_req_t req;
-    memreq_t mem;
     int i, window_size, offset, ret;
 
     window_size = (stop_pg - start_pg) << 8;
@@ -1483,11 +1478,9 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg,
     if (ret)
 	    goto failed;
 
-    mem.CardOffset = (start_pg << 8) + cm_offset;
-    offset = mem.CardOffset % window_size;
-    mem.CardOffset -= offset;
-    mem.Page = 0;
-    ret = pcmcia_map_mem_page(link, link->win, &mem);
+    offset = (start_pg << 8) + cm_offset;
+    offset -= offset % window_size;
+    ret = pcmcia_map_mem_page(link, link->win, offset);
     if (ret)
 	    goto failed;
 
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 307cd17..377367d 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -44,7 +44,6 @@
 #include <linux/jiffies.h>
 #include <linux/firmware.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -325,9 +324,8 @@ static int smc91c92_probe(struct pcmcia_device *link)
     link->priv = dev;
 
     spin_lock_init(&smc->lock);
-    link->io.NumPorts1 = 16;
-    link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-    link->io.IOAddrLines = 4;
+    link->resource[0]->end = 16;
+    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -428,12 +426,13 @@ static int mhz_mfc_config_check(struct pcmcia_device *p_dev,
 				void *priv_data)
 {
 	int k;
-	p_dev->io.BasePort2 = cf->io.win[0].base;
+	p_dev->resource[1]->start = cf->io.win[0].base;
 	for (k = 0; k < 0x400; k += 0x10) {
 		if (k & 0x80)
 			continue;
-		p_dev->io.BasePort1 = k ^ 0x300;
-		if (!pcmcia_request_io(p_dev, &p_dev->io))
+		p_dev->resource[0]->start = k ^ 0x300;
+		p_dev->io_lines = 16;
+		if (!pcmcia_request_io(p_dev))
 			return 0;
 	}
 	return -ENODEV;
@@ -444,21 +443,20 @@ static int mhz_mfc_config(struct pcmcia_device *link)
     struct net_device *dev = link->priv;
     struct smc_private *smc = netdev_priv(dev);
     win_req_t req;
-    memreq_t mem;
+    unsigned int offset;
     int i;
 
     link->conf.Attributes |= CONF_ENABLE_SPKR;
     link->conf.Status = CCSR_AUDIO_ENA;
-    link->io.IOAddrLines = 16;
-    link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
-    link->io.NumPorts2 = 8;
+    link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+    link->resource[1]->end = 8;
 
     /* The Megahertz combo cards have modem-like CIS entries, so
        we have to explicitly try a bunch of port combinations. */
     if (pcmcia_loop_config(link, mhz_mfc_config_check, NULL))
 	    return -ENODEV;
 
-    dev->base_addr = link->io.BasePort1;
+    dev->base_addr = link->resource[0]->start;
 
     /* Allocate a memory window, for accessing the ISR */
     req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
@@ -469,11 +467,8 @@ static int mhz_mfc_config(struct pcmcia_device *link)
 	    return -ENODEV;
 
     smc->base = ioremap(req.Base, req.Size);
-    mem.CardOffset = mem.Page = 0;
-    if (smc->manfid == MANFID_MOTOROLA)
-	mem.CardOffset = link->conf.ConfigBase;
-    i = pcmcia_map_mem_page(link, link->win, &mem);
-
+    offset = (smc->manfid == MANFID_MOTOROLA) ? link->conf.ConfigBase : 0;
+    i = pcmcia_map_mem_page(link, link->win, offset);
     if ((i == 0) &&
 	(smc->manfid == MANFID_MEGAHERTZ) &&
 	(smc->cardid == PRODID_MEGAHERTZ_EM3288))
@@ -546,7 +541,7 @@ static void mot_config(struct pcmcia_device *link)
     struct net_device *dev = link->priv;
     struct smc_private *smc = netdev_priv(dev);
     unsigned int ioaddr = dev->base_addr;
-    unsigned int iouart = link->io.BasePort2;
+    unsigned int iouart = link->resource[1]->start;
 
     /* Set UART base address and force map with COR bit 1 */
     writeb(iouart & 0xff,        smc->base + MOT_UART + CISREG_IOBASE_0);
@@ -602,9 +597,9 @@ static int smc_configcheck(struct pcmcia_device *p_dev,
 			   unsigned int vcc,
 			   void *priv_data)
 {
-	p_dev->io.BasePort1 = cf->io.win[0].base;
-	p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
-	return pcmcia_request_io(p_dev, &p_dev->io);
+	p_dev->resource[0]->start = cf->io.win[0].base;
+	p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
+	return pcmcia_request_io(p_dev);
 }
 
 static int smc_config(struct pcmcia_device *link)
@@ -612,10 +607,10 @@ static int smc_config(struct pcmcia_device *link)
     struct net_device *dev = link->priv;
     int i;
 
-    link->io.NumPorts1 = 16;
+    link->resource[0]->end = 16;
     i = pcmcia_loop_config(link, smc_configcheck, NULL);
     if (!i)
-	    dev->base_addr = link->io.BasePort1;
+	    dev->base_addr = link->resource[0]->start;
 
     return i;
 }
@@ -647,27 +642,27 @@ static int osi_config(struct pcmcia_device *link)
 
     link->conf.Attributes |= CONF_ENABLE_SPKR;
     link->conf.Status = CCSR_AUDIO_ENA;
-    link->io.NumPorts1 = 64;
-    link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
-    link->io.NumPorts2 = 8;
-    link->io.IOAddrLines = 16;
+    link->resource[0]->end = 64;
+    link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+    link->resource[1]->end = 8;
 
     /* Enable Hard Decode, LAN, Modem */
     link->conf.ConfigIndex = 0x23;
+    link->io_lines = 16;
 
     for (i = j = 0; j < 4; j++) {
-	link->io.BasePort2 = com[j];
-	i = pcmcia_request_io(link, &link->io);
+	link->resource[1]->start = com[j];
+	i = pcmcia_request_io(link);
 	if (i == 0)
 		break;
     }
     if (i != 0) {
 	/* Fallback: turn off hard decode */
 	link->conf.ConfigIndex = 0x03;
-	link->io.NumPorts2 = 0;
-	i = pcmcia_request_io(link, &link->io);
+	link->resource[1]->end = 0;
+	i = pcmcia_request_io(link);
     }
-    dev->base_addr = link->io.BasePort1 + 0x10;
+    dev->base_addr = link->resource[0]->start + 0x10;
     return i;
 }
 
@@ -684,7 +679,7 @@ static int osi_load_firmware(struct pcmcia_device *link)
 
 	/* Download the Seven of Diamonds firmware */
 	for (i = 0; i < fw->size; i++) {
-	    outb(fw->data[i], link->io.BasePort1 + 2);
+	    outb(fw->data[i], link->resource[0]->start + 2);
 	    udelay(50);
 	}
 	release_firmware(fw);
@@ -726,12 +721,12 @@ static int osi_setup(struct pcmcia_device *link, u_short manfid, u_short cardid)
 		return rc;
     } else if (manfid == MANFID_OSITECH) {
 	/* Make sure both functions are powered up */
-	set_bits(0x300, link->io.BasePort1 + OSITECH_AUI_PWR);
+	set_bits(0x300, link->resource[0]->start + OSITECH_AUI_PWR);
 	/* Now, turn on the interrupt for both card functions */
-	set_bits(0x300, link->io.BasePort1 + OSITECH_RESET_ISR);
+	set_bits(0x300, link->resource[0]->start + OSITECH_RESET_ISR);
 	dev_dbg(&link->dev, "AUI/PWR: %4.4x RESET/ISR: %4.4x\n",
-	      inw(link->io.BasePort1 + OSITECH_AUI_PWR),
-	      inw(link->io.BasePort1 + OSITECH_RESET_ISR));
+	      inw(link->resource[0]->start + OSITECH_AUI_PWR),
+	      inw(link->resource[0]->start + OSITECH_RESET_ISR));
     }
     return 0;
 }
@@ -804,7 +799,7 @@ static int check_sig(struct pcmcia_device *link)
     }
 
     /* Try setting bus width */
-    width = (link->io.Attributes1 == IO_DATA_PATH_WIDTH_AUTO);
+    width = (link->resource[0]->flags == IO_DATA_PATH_WIDTH_AUTO);
     s = inb(ioaddr + CONFIG);
     if (width)
 	s |= CFG_16BIT;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index b6c36448..4eb6f98 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -82,7 +82,6 @@
 #include <linux/bitops.h>
 #include <linux/mii.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -678,9 +677,9 @@ xirc2ps_config_modem(struct pcmcia_device *p_dev,
 
 	if (cf->io.nwin > 0  &&  (cf->io.win[0].base & 0xf) == 8) {
 		for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
-			p_dev->io.BasePort2 = cf->io.win[0].base;
-			p_dev->io.BasePort1 = ioaddr;
-			if (!pcmcia_request_io(p_dev, &p_dev->io))
+			p_dev->resource[1]->start = cf->io.win[0].base;
+			p_dev->resource[0]->start = ioaddr;
+			if (!pcmcia_request_io(p_dev))
 				return 0;
 		}
 	}
@@ -697,11 +696,11 @@ xirc2ps_config_check(struct pcmcia_device *p_dev,
 	int *pass = priv_data;
 
 	if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
-		p_dev->io.BasePort2 = cf->io.win[0].base;
-		p_dev->io.BasePort1 = p_dev->io.BasePort2
+		p_dev->resource[1]->start = cf->io.win[0].base;
+		p_dev->resource[0]->start = p_dev->resource[1]->start
 			+ (*pass ? (cf->index & 0x20 ? -24:8)
 			   : (cf->index & 0x20 ?   8:-24));
-		if (!pcmcia_request_io(p_dev, &p_dev->io))
+		if (!pcmcia_request_io(p_dev))
 			return 0;
 	}
 	return -ENODEV;
@@ -808,8 +807,7 @@ xirc2ps_config(struct pcmcia_device * link)
 	goto failure;
     }
 
-    link->io.IOAddrLines =10;
-    link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
     if (local->modem) {
 	int pass;
 
@@ -817,16 +815,16 @@ xirc2ps_config(struct pcmcia_device * link)
 	    link->conf.Attributes |= CONF_ENABLE_SPKR;
 	    link->conf.Status |= CCSR_AUDIO_ENA;
 	}
-	link->io.NumPorts2 = 8;
-	link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+	link->resource[1]->end = 8;
+	link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
 	if (local->dingo) {
 	    /* Take the Modem IO port from the CIS and scan for a free
 	     * Ethernet port */
-	    link->io.NumPorts1 = 16; /* no Mako stuff anymore */
+	    link->resource[0]->end = 16; /* no Mako stuff anymore */
 	    if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL))
 		    goto port_found;
 	} else {
-	    link->io.NumPorts1 = 18;
+	    link->resource[0]->end = 18;
 	    /* We do 2 passes here: The first one uses the regular mapping and
 	     * the second tries again, thereby considering that the 32 ports are
 	     * mirrored every 32 bytes. Actually we use a mirrored port for
@@ -841,14 +839,15 @@ xirc2ps_config(struct pcmcia_device * link)
 	}
 	printk(KNOT_XIRC "no ports available\n");
     } else {
-	link->io.NumPorts1 = 16;
+	link->io_lines = 10;
+	link->resource[0]->end = 16;
 	for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
-	    link->io.BasePort1 = ioaddr;
-	    if (!(err=pcmcia_request_io(link, &link->io)))
+	    link->resource[0]->start = ioaddr;
+	    if (!(err = pcmcia_request_io(link)))
 		goto port_found;
 	}
-	link->io.BasePort1 = 0; /* let CS decide */
-	if ((err=pcmcia_request_io(link, &link->io)))
+	link->resource[0]->start = 0; /* let CS decide */
+	if ((err = pcmcia_request_io(link)))
 	    goto config_error;
     }
   port_found:
@@ -870,24 +869,21 @@ xirc2ps_config(struct pcmcia_device * link)
 	goto config_error;
 
     if (local->dingo) {
-	conf_reg_t reg;
 	win_req_t req;
-	memreq_t mem;
 
 	/* Reset the modem's BAR to the correct value
 	 * This is necessary because in the RequestConfiguration call,
 	 * the base address of the ethernet port (BasePort1) is written
 	 * to the BAR registers of the modem.
 	 */
-	reg.Action = CS_WRITE;
-	reg.Offset = CISREG_IOBASE_0;
-	reg.Value = link->io.BasePort2 & 0xff;
-	if ((err = pcmcia_access_configuration_register(link, &reg)))
+	err = pcmcia_write_config_byte(link, CISREG_IOBASE_0, (u8)
+				link->resource[1]->start & 0xff);
+	if (err)
 	    goto config_error;
-	reg.Action = CS_WRITE;
-	reg.Offset = CISREG_IOBASE_1;
-	reg.Value = (link->io.BasePort2 >> 8) & 0xff;
-	if ((err = pcmcia_access_configuration_register(link, &reg)))
+
+	err = pcmcia_write_config_byte(link, CISREG_IOBASE_1,
+				(link->resource[1]->start >> 8) & 0xff);
+	if (err)
 	    goto config_error;
 
 	/* There is no config entry for the Ethernet part which
@@ -901,16 +897,14 @@ xirc2ps_config(struct pcmcia_device * link)
 	    goto config_error;
 
 	local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800;
-	mem.CardOffset = 0x0;
-	mem.Page = 0;
-	if ((err = pcmcia_map_mem_page(link, link->win, &mem)))
+	if ((err = pcmcia_map_mem_page(link, link->win, 0)))
 	    goto config_error;
 
 	/* Setup the CCRs; there are no infos in the CIS about the Ethernet
 	 * part.
 	 */
 	writeb(0x47, local->dingo_ccr + CISREG_COR);
-	ioaddr = link->io.BasePort1;
+	ioaddr = link->resource[0]->start;
 	writeb(ioaddr & 0xff	  , local->dingo_ccr + CISREG_IOBASE_0);
 	writeb((ioaddr >> 8)&0xff , local->dingo_ccr + CISREG_IOBASE_1);
 
@@ -957,7 +951,7 @@ xirc2ps_config(struct pcmcia_device * link)
 
     /* we can now register the device with the net subsystem */
     dev->irq = link->irq;
-    dev->base_addr = link->io.BasePort1;
+    dev->base_addr = link->resource[0]->start;
 
     if (local->dingo)
 	do_reset(dev, 1); /* a kludge to make the cem56 work */
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index 33bdc6a..9a121a5 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -32,7 +32,6 @@
 #include <linux/timer.h>
 #include <linux/netdevice.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -155,8 +154,6 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
 				unsigned int vcc,
 				void *priv_data)
 {
-	win_req_t *req = priv_data;
-
 	if (cfg->index == 0)
 		return -ENODEV;
 
@@ -176,52 +173,25 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
-	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-		if (!(io->flags & CISTPL_IO_8BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-		if (!(io->flags & CISTPL_IO_16BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-		p_dev->io.BasePort1 = io->win[0].base;
-		p_dev->io.NumPorts1 = io->win[0].len;
+		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+		p_dev->resource[0]->flags |=
+					pcmcia_io_cfg_data_width(io->flags);
+		p_dev->resource[0]->start = io->win[0].base;
+		p_dev->resource[0]->end = io->win[0].len;
 		if (io->nwin > 1) {
-			p_dev->io.Attributes2 = p_dev->io.Attributes1;
-			p_dev->io.BasePort2 = io->win[1].base;
-			p_dev->io.NumPorts2 = io->win[1].len;
+			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+			p_dev->resource[1]->start = io->win[1].base;
+			p_dev->resource[1]->end = io->win[1].len;
 		}
 	}
 
 	/* This reserves IO space but doesn't actually enable it */
-	if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+	if (pcmcia_request_io(p_dev) != 0)
 		return -ENODEV;
 
-	/*
-	  Now set up a common memory window, if needed.  There is room
-	  in the struct pcmcia_device structure for one memory window handle,
-	  but if the base addresses need to be saved, or if multiple
-	  windows are needed, the info should go in the private data
-	  structure for this device.
-
-	  Note that the memory window base is a physical address, and
-	  needs to be mapped to virtual space with ioremap() before it
-	  is used.
-	*/
-	if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
-		cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
-		memreq_t map;
-		req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
-		req->Base = mem->win[0].host_addr;
-		req->Size = mem->win[0].len;
-		req->AccessSpeed = 0;
-		if (pcmcia_request_window(p_dev, req, &p_dev->win) != 0)
-			return -ENODEV;
-		map.Page = 0;
-		map.CardOffset = mem->win[0].card_addr;
-		if (pcmcia_map_mem_page(p_dev, p_dev->win, &map) != 0)
-			return -ENODEV;
-	}
 	/* If we got this far, we're cool! */
 	return 0;
 }
@@ -230,17 +200,12 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
 static int airo_config(struct pcmcia_device *link)
 {
 	local_info_t *dev;
-	win_req_t *req;
 	int ret;
 
 	dev = link->priv;
 
 	dev_dbg(&link->dev, "airo_config\n");
 
-	req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
-	if (!req)
-		return -ENOMEM;
-
 	/*
 	 * In this loop, we scan the CIS for configuration table
 	 * entries, each of which describes a valid card
@@ -255,7 +220,7 @@ static int airo_config(struct pcmcia_device *link)
 	 * and most client drivers will only use the CIS to fill in
 	 * implementation-defined details.
 	 */
-	ret = pcmcia_loop_config(link, airo_cs_config_check, req);
+	ret = pcmcia_loop_config(link, airo_cs_config_check, NULL);
 	if (ret)
 		goto failed;
 
@@ -272,7 +237,7 @@ static int airo_config(struct pcmcia_device *link)
 		goto failed;
 	((local_info_t *)link->priv)->eth_dev =
 		init_airo_card(link->irq,
-			       link->io.BasePort1, 1, &link->dev);
+			       link->resource[0]->start, 1, &link->dev);
 	if (!((local_info_t *)link->priv)->eth_dev)
 		goto failed;
 
@@ -282,22 +247,15 @@ static int airo_config(struct pcmcia_device *link)
 	if (link->conf.Vpp)
 		printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
 	printk(", irq %d", link->irq);
-	if (link->io.NumPorts1)
-		printk(", io 0x%04x-0x%04x", link->io.BasePort1,
-		       link->io.BasePort1+link->io.NumPorts1-1);
-	if (link->io.NumPorts2)
-		printk(" & 0x%04x-0x%04x", link->io.BasePort2,
-		       link->io.BasePort2+link->io.NumPorts2-1);
-	if (link->win)
-		printk(", mem 0x%06lx-0x%06lx", req->Base,
-		       req->Base+req->Size-1);
+	if (link->resource[0])
+		printk(" & %pR", link->resource[0]);
+	if (link->resource[1])
+		printk(" & %pR", link->resource[1]);
 	printk("\n");
-	kfree(req);
 	return 0;
 
  failed:
 	airo_release(link);
-	kfree(req);
 	return -ENODEV;
 } /* airo_config */
 
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index c2746fc..3b63216 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -42,7 +42,6 @@
 #include <linux/moduleparam.h>
 #include <linux/device.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -191,25 +190,23 @@ static int atmel_config_check(struct pcmcia_device *p_dev,
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
-	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-		if (!(io->flags & CISTPL_IO_8BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-		if (!(io->flags & CISTPL_IO_16BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-		p_dev->io.BasePort1 = io->win[0].base;
-		p_dev->io.NumPorts1 = io->win[0].len;
+		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+		p_dev->resource[0]->flags |=
+					pcmcia_io_cfg_data_width(io->flags);
+		p_dev->resource[0]->start = io->win[0].base;
+		p_dev->resource[0]->end = io->win[0].len;
 		if (io->nwin > 1) {
-			p_dev->io.Attributes2 = p_dev->io.Attributes1;
-			p_dev->io.BasePort2 = io->win[1].base;
-			p_dev->io.NumPorts2 = io->win[1].len;
+			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+			p_dev->resource[1]->start = io->win[1].base;
+			p_dev->resource[1]->end = io->win[1].len;
 		}
 	}
 
 	/* This reserves IO space but doesn't actually enable it */
-	return pcmcia_request_io(p_dev, &p_dev->io);
+	return pcmcia_request_io(p_dev);
 }
 
 static int atmel_config(struct pcmcia_device *link)
@@ -254,7 +251,7 @@ static int atmel_config(struct pcmcia_device *link)
 
 	((local_info_t*)link->priv)->eth_dev =
 		init_atmel_card(link->irq,
-				link->io.BasePort1,
+				link->resource[0]->start,
 				did ? did->driver_info : ATMEL_FW_TYPE_NONE,
 				&link->dev,
 				card_present,
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index 0e99b63..dfbc41d 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -26,7 +26,6 @@
 #include <linux/ssb/ssb.h>
 #include <linux/slab.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
@@ -65,7 +64,6 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 {
 	struct ssb_bus *ssb;
 	win_req_t win;
-	memreq_t mem;
 	int err = -ENOMEM;
 	int res = 0;
 
@@ -78,12 +76,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 	dev->conf.Attributes = CONF_ENABLE_IRQ;
 	dev->conf.IntType = INT_MEMORY_AND_IO;
 
-	dev->io.BasePort2 = 0;
-	dev->io.NumPorts2 = 0;
-	dev->io.Attributes2 = 0;
-
-	win.Attributes = WIN_ADDR_SPACE_MEM | WIN_MEMORY_TYPE_CM |
-			 WIN_ENABLE | WIN_DATA_WIDTH_16 |
+	win.Attributes =  WIN_ENABLE | WIN_DATA_WIDTH_16 |
 			 WIN_USE_WAIT;
 	win.Base = 0;
 	win.Size = SSB_CORE_SIZE;
@@ -92,9 +85,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 	if (res != 0)
 		goto err_kfree_ssb;
 
-	mem.CardOffset = 0;
-	mem.Page = 0;
-	res = pcmcia_map_mem_page(dev, dev->win, &mem);
+	res = pcmcia_map_mem_page(dev, dev->win, 0);
 	if (res != 0)
 		goto err_disable;
 
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 29b31a6..ba54d1b 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -12,7 +12,6 @@
 #include <linux/wireless.h>
 #include <net/iw_handler.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -23,7 +22,7 @@
 #include "hostap_wlan.h"
 
 
-static dev_info_t dev_info = "hostap_cs";
+static char *dev_info = "hostap_cs";
 
 MODULE_AUTHOR("Jouni Malinen");
 MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN "
@@ -225,27 +224,18 @@ static int prism2_pccard_card_present(local_info_t *local)
 static void sandisk_set_iobase(local_info_t *local)
 {
 	int res;
-	conf_reg_t reg;
 	struct hostap_cs_priv *hw_priv = local->hw_priv;
 
-	reg.Function = 0;
-	reg.Action = CS_WRITE;
-	reg.Offset = 0x10; /* 0x3f0 IO base 1 */
-	reg.Value = hw_priv->link->io.BasePort1 & 0x00ff;
-	res = pcmcia_access_configuration_register(hw_priv->link,
-						   &reg);
+	res = pcmcia_write_config_byte(hw_priv->link, 0x10,
+				hw_priv->link->resource[0]->start & 0x00ff);
 	if (res != 0) {
 		printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -"
 		       " res=%d\n", res);
 	}
 	udelay(10);
 
-	reg.Function = 0;
-	reg.Action = CS_WRITE;
-	reg.Offset = 0x12; /* 0x3f2 IO base 2 */
-	reg.Value = (hw_priv->link->io.BasePort1 & 0xff00) >> 8;
-	res = pcmcia_access_configuration_register(hw_priv->link,
-						   &reg);
+	res = pcmcia_write_config_byte(hw_priv->link, 0x12,
+				(hw_priv->link->resource[0]->start >> 8) & 0x00ff);
 	if (res != 0) {
 		printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -"
 		       " res=%d\n", res);
@@ -271,12 +261,11 @@ static void sandisk_write_hcr(local_info_t *local, int hcr)
 static int sandisk_enable_wireless(struct net_device *dev)
 {
 	int res, ret = 0;
-	conf_reg_t reg;
 	struct hostap_interface *iface = netdev_priv(dev);
 	local_info_t *local = iface->local;
 	struct hostap_cs_priv *hw_priv = local->hw_priv;
 
-	if (hw_priv->link->io.NumPorts1 < 0x42) {
+	if (resource_size(hw_priv->link->resource[0]) < 0x42) {
 		/* Not enough ports to be SanDisk multi-function card */
 		ret = -ENODEV;
 		goto done;
@@ -298,12 +287,8 @@ static int sandisk_enable_wireless(struct net_device *dev)
 	       " - using vendor-specific initialization\n", dev->name);
 	hw_priv->sandisk_connectplus = 1;
 
-	reg.Function = 0;
-	reg.Action = CS_WRITE;
-	reg.Offset = CISREG_COR;
-	reg.Value = COR_SOFT_RESET;
-	res = pcmcia_access_configuration_register(hw_priv->link,
-						   &reg);
+	res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
+				COR_SOFT_RESET);
 	if (res != 0) {
 		printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
 		       dev->name, res);
@@ -311,16 +296,13 @@ static int sandisk_enable_wireless(struct net_device *dev)
 	}
 	mdelay(5);
 
-	reg.Function = 0;
-	reg.Action = CS_WRITE;
-	reg.Offset = CISREG_COR;
 	/*
 	 * Do not enable interrupts here to avoid some bogus events. Interrupts
 	 * will be enabled during the first cor_sreset call.
 	 */
-	reg.Value = COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE | COR_FUNC_ENA;
-	res = pcmcia_access_configuration_register(hw_priv->link,
-						   &reg);
+	res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
+				(COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE |
+					COR_FUNC_ENA));
 	if (res != 0) {
 		printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
 		       dev->name, res);
@@ -343,30 +325,23 @@ done:
 static void prism2_pccard_cor_sreset(local_info_t *local)
 {
 	int res;
-	conf_reg_t reg;
+	u8 val;
 	struct hostap_cs_priv *hw_priv = local->hw_priv;
 
 	if (!prism2_pccard_card_present(local))
 	       return;
 
-	reg.Function = 0;
-	reg.Action = CS_READ;
-	reg.Offset = CISREG_COR;
-	reg.Value = 0;
-	res = pcmcia_access_configuration_register(hw_priv->link,
-						   &reg);
+	res = pcmcia_read_config_byte(hw_priv->link, CISREG_COR, &val);
 	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 1 (%d)\n",
 		       res);
 		return;
 	}
 	printk(KERN_DEBUG "prism2_pccard_cor_sreset: original COR %02x\n",
-	       reg.Value);
+		val);
 
-	reg.Action = CS_WRITE;
-	reg.Value |= COR_SOFT_RESET;
-	res = pcmcia_access_configuration_register(hw_priv->link,
-						   &reg);
+	val |= COR_SOFT_RESET;
+	res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, val);
 	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 2 (%d)\n",
 		       res);
@@ -375,11 +350,10 @@ static void prism2_pccard_cor_sreset(local_info_t *local)
 
 	mdelay(hw_priv->sandisk_connectplus ? 5 : 2);
 
-	reg.Value &= ~COR_SOFT_RESET;
+	val &= ~COR_SOFT_RESET;
 	if (hw_priv->sandisk_connectplus)
-		reg.Value |= COR_IREQ_ENA;
-	res = pcmcia_access_configuration_register(hw_priv->link,
-						   &reg);
+		val |= COR_IREQ_ENA;
+	res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, val);
 	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 3 (%d)\n",
 		       res);
@@ -396,8 +370,7 @@ static void prism2_pccard_cor_sreset(local_info_t *local)
 static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
 {
 	int res;
-	conf_reg_t reg;
-	int old_cor;
+	u8 old_cor;
 	struct hostap_cs_priv *hw_priv = local->hw_priv;
 
 	if (!prism2_pccard_card_present(local))
@@ -408,25 +381,17 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
 		return;
 	}
 
-	reg.Function = 0;
-	reg.Action = CS_READ;
-	reg.Offset = CISREG_COR;
-	reg.Value = 0;
-	res = pcmcia_access_configuration_register(hw_priv->link,
-						   &reg);
+	res = pcmcia_read_config_byte(hw_priv->link, CISREG_COR, &old_cor);
 	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 1 "
 		       "(%d)\n", res);
 		return;
 	}
 	printk(KERN_DEBUG "prism2_pccard_genesis_sreset: original COR %02x\n",
-	       reg.Value);
-	old_cor = reg.Value;
+		old_cor);
 
-	reg.Action = CS_WRITE;
-	reg.Value |= COR_SOFT_RESET;
-	res = pcmcia_access_configuration_register(hw_priv->link,
-						   &reg);
+	res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
+				old_cor | COR_SOFT_RESET);
 	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 2 "
 		       "(%d)\n", res);
@@ -436,11 +401,7 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
 	mdelay(10);
 
 	/* Setup Genesis mode */
-	reg.Action = CS_WRITE;
-	reg.Value = hcr;
-	reg.Offset = CISREG_CCSR;
-	res = pcmcia_access_configuration_register(hw_priv->link,
-						   &reg);
+	res = pcmcia_write_config_byte(hw_priv->link, CISREG_CCSR, hcr);
 	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 3 "
 		       "(%d)\n", res);
@@ -448,11 +409,8 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
 	}
 	mdelay(10);
 
-	reg.Action = CS_WRITE;
-	reg.Offset = CISREG_COR;
-	reg.Value = old_cor & ~COR_SOFT_RESET;
-	res = pcmcia_access_configuration_register(hw_priv->link,
-						   &reg);
+	res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
+				old_cor & ~COR_SOFT_RESET);
 	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 4 "
 		       "(%d)\n", res);
@@ -561,30 +519,24 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
 	PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
 	       "dflt->io.nwin=%d\n",
 	       cfg->io.nwin, dflt->io.nwin);
-	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-		PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
-		       "io.base=0x%04x, len=%d\n", io->flags,
-		       io->win[0].base, io->win[0].len);
-		if (!(io->flags & CISTPL_IO_8BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-		if (!(io->flags & CISTPL_IO_16BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-		p_dev->io.IOAddrLines = io->flags &
-			CISTPL_IO_LINES_MASK;
-		p_dev->io.BasePort1 = io->win[0].base;
-		p_dev->io.NumPorts1 = io->win[0].len;
+		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+		p_dev->resource[0]->flags |=
+					pcmcia_io_cfg_data_width(io->flags);
+		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->resource[0]->start = io->win[0].base;
+		p_dev->resource[0]->end = io->win[0].len;
 		if (io->nwin > 1) {
-			p_dev->io.Attributes2 = p_dev->io.Attributes1;
-			p_dev->io.BasePort2 = io->win[1].base;
-			p_dev->io.NumPorts2 = io->win[1].len;
+			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+			p_dev->resource[1]->start = io->win[1].base;
+			p_dev->resource[1]->end = io->win[1].len;
 		}
 	}
 
 	/* This reserves IO space but doesn't actually enable it */
-	return pcmcia_request_io(p_dev, &p_dev->io);
+	return pcmcia_request_io(p_dev);
 }
 
 static int prism2_config(struct pcmcia_device *link)
@@ -646,7 +598,7 @@ static int prism2_config(struct pcmcia_device *link)
 		goto failed_unlock;
 
 	dev->irq = link->irq;
-	dev->base_addr = link->io.BasePort1;
+	dev->base_addr = link->resource[0]->start;
 
 	spin_unlock_irqrestore(&local->irq_init_lock, flags);
 
@@ -658,12 +610,10 @@ static int prism2_config(struct pcmcia_device *link)
 		       link->conf.Vpp % 10);
 	if (link->conf.Attributes & CONF_ENABLE_IRQ)
 		printk(", irq %d", link->irq);
-	if (link->io.NumPorts1)
-		printk(", io 0x%04x-0x%04x", link->io.BasePort1,
-		       link->io.BasePort1+link->io.NumPorts1-1);
-	if (link->io.NumPorts2)
-		printk(" & 0x%04x-0x%04x", link->io.BasePort2,
-		       link->io.BasePort2+link->io.NumPorts2-1);
+	if (link->resource[0])
+		printk(" & %pR", link->resource[0]);
+	if (link->resource[1])
+		printk(" & %pR", link->resource[1]);
 	printk("\n");
 
 	local->shutdown = 0;
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 08e4e39..9c29839 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -28,7 +28,6 @@
 #include <linux/firmware.h>
 #include <linux/netdevice.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
@@ -802,9 +801,9 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev,
 			 unsigned int vcc,
 			 void *priv_data)
 {
-	p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-	p_dev->io.BasePort1 = cfg->io.win[0].base;
-	p_dev->io.NumPorts1 = cfg->io.win[0].len;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+	p_dev->resource[0]->start = cfg->io.win[0].base;
+	p_dev->resource[0]->end = cfg->io.win[0].len;
 
 	/* Do we need to allocate an interrupt? */
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
@@ -816,7 +815,7 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev,
 	}
 
 	/* This reserves IO space but doesn't actually enable it */
-	return pcmcia_request_io(p_dev, &p_dev->io);
+	return pcmcia_request_io(p_dev);
 }
 
 static int if_cs_probe(struct pcmcia_device *p_dev)
@@ -854,7 +853,8 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 		goto out1;
 
 	/* Initialize io access */
-	card->iobase = ioport_map(p_dev->io.BasePort1, p_dev->io.NumPorts1);
+	card->iobase = ioport_map(p_dev->resource[0]->start,
+				resource_size(p_dev->resource[0]));
 	if (!card->iobase) {
 		lbs_pr_err("error in ioport_map\n");
 		ret = -EIO;
@@ -873,9 +873,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 	}
 
 	/* Finally, report what we've done */
-	lbs_deb_cs("irq %d, io 0x%04x-0x%04x\n",
-	       p_dev->irq, p_dev->io.BasePort1,
-	       p_dev->io.BasePort1 + p_dev->io.NumPorts1 - 1);
+	lbs_deb_cs("irq %d, io %pR", p_dev->irq, p_dev->resource[0]);
 
 	/*
 	 * Most of the libertas cards can do unaligned register access, but some
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index b16d5db..ef46a2d 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -17,7 +17,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -192,25 +191,23 @@ static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
-	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-		if (!(io->flags & CISTPL_IO_8BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-		if (!(io->flags & CISTPL_IO_16BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-		p_dev->io.BasePort1 = io->win[0].base;
-		p_dev->io.NumPorts1 = io->win[0].len;
+		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+		p_dev->resource[0]->flags |=
+			pcmcia_io_cfg_data_width(io->flags);
+		p_dev->resource[0]->start = io->win[0].base;
+		p_dev->resource[0]->end = io->win[0].len;
 		if (io->nwin > 1) {
-			p_dev->io.Attributes2 = p_dev->io.Attributes1;
-			p_dev->io.BasePort2 = io->win[1].base;
-			p_dev->io.NumPorts2 = io->win[1].len;
+			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+			p_dev->resource[1]->start = io->win[1].base;
+			p_dev->resource[1]->end = io->win[1].len;
 		}
 
 		/* This reserves IO space but doesn't actually enable it */
-		if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+		if (pcmcia_request_io(p_dev) != 0)
 			goto next_entry;
 	}
 	return 0;
@@ -258,7 +255,8 @@ orinoco_cs_config(struct pcmcia_device *link)
 	/* We initialize the hermes structure before completing PCMCIA
 	 * configuration just in case the interrupt handler gets
 	 * called. */
-	mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
+	mem = ioport_map(link->resource[0]->start,
+			resource_size(link->resource[0]));
 	if (!mem)
 		goto failed;
 
@@ -280,7 +278,7 @@ orinoco_cs_config(struct pcmcia_device *link)
 	}
 
 	/* Register an interface with the stack */
-	if (orinoco_if_add(priv, link->io.BasePort1,
+	if (orinoco_if_add(priv, link->resource[0]->start,
 			   link->irq, NULL) != 0) {
 		printk(KERN_ERR PFX "orinoco_if_add() failed\n");
 		goto failed;
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index b51a9ad..873877e 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -25,7 +25,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -80,35 +79,27 @@ static int
 spectrum_reset(struct pcmcia_device *link, int idle)
 {
 	int ret;
-	conf_reg_t reg;
-	u_int save_cor;
+	u8 save_cor;
+	u8 ccsr;
 
 	/* Doing it if hardware is gone is guaranteed crash */
 	if (!pcmcia_dev_present(link))
 		return -ENODEV;
 
 	/* Save original COR value */
-	reg.Function = 0;
-	reg.Action = CS_READ;
-	reg.Offset = CISREG_COR;
-	ret = pcmcia_access_configuration_register(link, &reg);
+	ret = pcmcia_read_config_byte(link, CISREG_COR, &save_cor);
 	if (ret)
 		goto failed;
-	save_cor = reg.Value;
 
 	/* Soft-Reset card */
-	reg.Action = CS_WRITE;
-	reg.Offset = CISREG_COR;
-	reg.Value = (save_cor | COR_SOFT_RESET);
-	ret = pcmcia_access_configuration_register(link, &reg);
+	ret = pcmcia_write_config_byte(link, CISREG_COR,
+				(save_cor | COR_SOFT_RESET));
 	if (ret)
 		goto failed;
 	udelay(1000);
 
 	/* Read CCSR */
-	reg.Action = CS_READ;
-	reg.Offset = CISREG_CCSR;
-	ret = pcmcia_access_configuration_register(link, &reg);
+	ret = pcmcia_read_config_byte(link, CISREG_CCSR, &ccsr);
 	if (ret)
 		goto failed;
 
@@ -116,19 +107,15 @@ spectrum_reset(struct pcmcia_device *link, int idle)
 	 * Start or stop the firmware.  Memory width bit should be
 	 * preserved from the value we've just read.
 	 */
-	reg.Action = CS_WRITE;
-	reg.Offset = CISREG_CCSR;
-	reg.Value = (idle ? HCR_IDLE : HCR_RUN) | (reg.Value & HCR_MEM16);
-	ret = pcmcia_access_configuration_register(link, &reg);
+	ccsr = (idle ? HCR_IDLE : HCR_RUN) | (ccsr & HCR_MEM16);
+	ret = pcmcia_write_config_byte(link, CISREG_CCSR, ccsr);
 	if (ret)
 		goto failed;
 	udelay(1000);
 
 	/* Restore original COR configuration index */
-	reg.Action = CS_WRITE;
-	reg.Offset = CISREG_COR;
-	reg.Value = (save_cor & ~COR_SOFT_RESET);
-	ret = pcmcia_access_configuration_register(link, &reg);
+	ret = pcmcia_write_config_byte(link, CISREG_COR,
+				(save_cor & ~COR_SOFT_RESET));
 	if (ret)
 		goto failed;
 	udelay(1000);
@@ -266,25 +253,23 @@ static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
-	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-		if (!(io->flags & CISTPL_IO_8BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-		if (!(io->flags & CISTPL_IO_16BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-		p_dev->io.BasePort1 = io->win[0].base;
-		p_dev->io.NumPorts1 = io->win[0].len;
+		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+		p_dev->resource[0]->flags |=
+			pcmcia_io_cfg_data_width(io->flags);
+		p_dev->resource[0]->start = io->win[0].base;
+		p_dev->resource[0]->end = io->win[0].len;
 		if (io->nwin > 1) {
-			p_dev->io.Attributes2 = p_dev->io.Attributes1;
-			p_dev->io.BasePort2 = io->win[1].base;
-			p_dev->io.NumPorts2 = io->win[1].len;
+			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+			p_dev->resource[1]->start = io->win[1].base;
+			p_dev->resource[1]->end = io->win[1].len;
 		}
 
 		/* This reserves IO space but doesn't actually enable it */
-		if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+		if (pcmcia_request_io(p_dev) != 0)
 			goto next_entry;
 	}
 	return 0;
@@ -332,7 +317,8 @@ spectrum_cs_config(struct pcmcia_device *link)
 	/* We initialize the hermes structure before completing PCMCIA
 	 * configuration just in case the interrupt handler gets
 	 * called. */
-	mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
+	mem = ioport_map(link->resource[0]->start,
+			resource_size(link->resource[0]));
 	if (!mem)
 		goto failed;
 
@@ -359,7 +345,7 @@ spectrum_cs_config(struct pcmcia_device *link)
 	}
 
 	/* Register an interface with the stack */
-	if (orinoco_if_add(priv, link->io.BasePort1,
+	if (orinoco_if_add(priv, link->resource[0]->start,
 			   link->irq, NULL) != 0) {
 		printk(KERN_ERR PFX "orinoco_if_add() failed\n");
 		goto failed;
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 9c38fc3..88560d0 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -46,7 +46,6 @@
 #include <linux/ethtool.h>
 #include <linux/ieee80211.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -315,9 +314,8 @@ static int ray_probe(struct pcmcia_device *p_dev)
 	local->finder = p_dev;
 
 	/* The io structure describes IO port mapping. None used here */
-	p_dev->io.NumPorts1 = 0;
-	p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-	p_dev->io.IOAddrLines = 5;
+	p_dev->resource[0]->end = 0;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 
 	/* General socket configuration */
 	p_dev->conf.Attributes = CONF_ENABLE_IRQ;
@@ -394,7 +392,6 @@ static int ray_config(struct pcmcia_device *link)
 	int ret = 0;
 	int i;
 	win_req_t req;
-	memreq_t mem;
 	struct net_device *dev = (struct net_device *)link->priv;
 	ray_dev_t *local = netdev_priv(dev);
 
@@ -431,9 +428,7 @@ static int ray_config(struct pcmcia_device *link)
 	ret = pcmcia_request_window(link, &req, &link->win);
 	if (ret)
 		goto failed;
-	mem.CardOffset = 0x0000;
-	mem.Page = 0;
-	ret = pcmcia_map_mem_page(link, link->win, &mem);
+	ret = pcmcia_map_mem_page(link, link->win, 0);
 	if (ret)
 		goto failed;
 	local->sram = ioremap(req.Base, req.Size);
@@ -447,9 +442,7 @@ static int ray_config(struct pcmcia_device *link)
 	ret = pcmcia_request_window(link, &req, &local->rmem_handle);
 	if (ret)
 		goto failed;
-	mem.CardOffset = 0x8000;
-	mem.Page = 0;
-	ret = pcmcia_map_mem_page(link, local->rmem_handle, &mem);
+	ret = pcmcia_map_mem_page(link, local->rmem_handle, 0x8000);
 	if (ret)
 		goto failed;
 	local->rmem = ioremap(req.Base, req.Size);
@@ -463,9 +456,7 @@ static int ray_config(struct pcmcia_device *link)
 	ret = pcmcia_request_window(link, &req, &local->amem_handle);
 	if (ret)
 		goto failed;
-	mem.CardOffset = 0x0000;
-	mem.Page = 0;
-	ret = pcmcia_map_mem_page(link, local->amem_handle, &mem);
+	ret = pcmcia_map_mem_page(link, local->amem_handle, 0);
 	if (ret)
 		goto failed;
 	local->amem = ioremap(req.Base, req.Size);
@@ -793,7 +784,6 @@ static void ray_release(struct pcmcia_device *link)
 {
 	struct net_device *dev = link->priv;
 	ray_dev_t *local = netdev_priv(dev);
-	int i;
 
 	dev_dbg(&link->dev, "ray_release\n");
 
@@ -802,13 +792,6 @@ static void ray_release(struct pcmcia_device *link)
 	iounmap(local->sram);
 	iounmap(local->rmem);
 	iounmap(local->amem);
-	/* Do bother checking to see if these succeed or not */
-	i = pcmcia_release_window(link, local->amem_handle);
-	if (i != 0)
-		dev_dbg(&link->dev, "ReleaseWindow(local->amem) ret = %x\n", i);
-	i = pcmcia_release_window(link, local->rmem_handle);
-	if (i != 0)
-		dev_dbg(&link->dev, "ReleaseWindow(local->rmem) ret = %x\n", i);
 	pcmcia_disable_device(link);
 
 	dev_dbg(&link->dev, "ray_release ending\n");
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 376c6b9..a1cc2d4 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -48,7 +48,6 @@
 
 #include <net/iw_handler.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -89,13 +88,6 @@
 static int wl3501_config(struct pcmcia_device *link);
 static void wl3501_release(struct pcmcia_device *link);
 
-/*
- * The dev_info variable is the "key" that is used to match up this
- * device driver with appropriate cards, through the card configuration
- * database.
- */
-static dev_info_t wl3501_dev_info = "wl3501_cs";
-
 static const struct {
 	int reg_domain;
 	int min, max, deflt;
@@ -1421,7 +1413,7 @@ static struct iw_statistics *wl3501_get_wireless_stats(struct net_device *dev)
 
 static void wl3501_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
 {
-	strlcpy(info->driver, wl3501_dev_info, sizeof(info->driver));
+	strlcpy(info->driver, "wl3501_cs", sizeof(info->driver));
 }
 
 static const struct ethtool_ops ops = {
@@ -1892,9 +1884,8 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
 	struct wl3501_card *this;
 
 	/* The io structure describes IO port mapping */
-	p_dev->io.NumPorts1	= 16;
-	p_dev->io.Attributes1	= IO_DATA_PATH_WIDTH_8;
-	p_dev->io.IOAddrLines	= 5;
+	p_dev->resource[0]->end	= 16;
+	p_dev->resource[0]->flags	= IO_DATA_PATH_WIDTH_8;
 
 	/* General socket configuration */
 	p_dev->conf.Attributes	= CONF_ENABLE_IRQ;
@@ -1940,13 +1931,14 @@ static int wl3501_config(struct pcmcia_device *link)
 	/* Try allocating IO ports.  This tries a few fixed addresses.  If you
 	 * want, you can also read the card's config table to pick addresses --
 	 * see the serial driver for an example. */
+	link->io_lines = 5;
 
 	for (j = 0x280; j < 0x400; j += 0x20) {
 		/* The '^0x300' is so that we probe 0x300-0x3ff first, then
 		 * 0x200-0x2ff, and so on, because this seems safer */
-		link->io.BasePort1 = j;
-		link->io.BasePort2 = link->io.BasePort1 + 0x10;
-		i = pcmcia_request_io(link, &link->io);
+		link->resource[0]->start = j;
+		link->resource[1]->start = link->resource[0]->start + 0x10;
+		i = pcmcia_request_io(link);
 		if (i == 0)
 			break;
 	}
@@ -1968,7 +1960,7 @@ static int wl3501_config(struct pcmcia_device *link)
 		goto failed;
 
 	dev->irq = link->irq;
-	dev->base_addr = link->io.BasePort1;
+	dev->base_addr = link->resource[0]->start;
 	SET_NETDEV_DEV(dev, &link->dev);
 	if (register_netdev(dev)) {
 		printk(KERN_NOTICE "wl3501_cs: register_netdev() failed\n");