diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/parisc/eisa.c | |
download | kernel_samsung_smdk4412-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip kernel_samsung_smdk4412-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz kernel_samsung_smdk4412-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/parisc/eisa.c')
-rw-r--r-- | drivers/parisc/eisa.c | 464 |
1 files changed, 464 insertions, 0 deletions
diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c new file mode 100644 index 0000000..043d47a --- /dev/null +++ b/drivers/parisc/eisa.c @@ -0,0 +1,464 @@ +/* + * eisa.c - provide support for EISA adapters in PA-RISC machines + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Copyright (c) 2001 Matthew Wilcox for Hewlett Packard + * Copyright (c) 2001 Daniel Engstrom <5116@telia.com> + * + * There are two distinct EISA adapters. Mongoose is found in machines + * before the 712; then the Wax ASIC is used. To complicate matters, the + * Wax ASIC also includes a PS/2 and RS-232 controller, but those are + * dealt with elsewhere; this file is concerned only with the EISA portions + * of Wax. + * + * + * HINT: + * ----- + * To allow an ISA card to work properly in the EISA slot you need to + * set an edge trigger level. This may be done on the palo command line + * by adding the kernel parameter "eisa_irq_edge=n,n2,[...]]", with + * n and n2 as the irq levels you want to use. + * + * Example: "eisa_irq_edge=10,11" allows ISA cards to operate at + * irq levels 10 and 11. + */ + +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/sched.h> +#include <linux/spinlock.h> +#include <linux/eisa.h> + +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/hardware.h> +#include <asm/processor.h> +#include <asm/parisc-device.h> +#include <asm/delay.h> +#include <asm/eisa_bus.h> +#include <asm/eisa_eeprom.h> + +#if 0 +#define EISA_DBG(msg, arg... ) printk(KERN_DEBUG "eisa: " msg , ## arg ) +#else +#define EISA_DBG(msg, arg... ) +#endif + +#define SNAKES_EEPROM_BASE_ADDR 0xF0810400 +#define MIRAGE_EEPROM_BASE_ADDR 0xF00C0400 + +static DEFINE_SPINLOCK(eisa_irq_lock); + +void __iomem *eisa_eeprom_addr; + +/* We can only have one EISA adapter in the system because neither + * implementation can be flexed. + */ +static struct eisa_ba { + struct pci_hba_data hba; + unsigned long eeprom_addr; + struct eisa_root_device root; +} eisa_dev; + +/* Port ops */ + +static inline unsigned long eisa_permute(unsigned short port) +{ + if (port & 0x300) { + return 0xfc000000 | ((port & 0xfc00) >> 6) + | ((port & 0x3f8) << 9) | (port & 7); + } else { + return 0xfc000000 | port; + } +} + +unsigned char eisa_in8(unsigned short port) +{ + if (EISA_bus) + return gsc_readb(eisa_permute(port)); + return 0xff; +} + +unsigned short eisa_in16(unsigned short port) +{ + if (EISA_bus) + return le16_to_cpu(gsc_readw(eisa_permute(port))); + return 0xffff; +} + +unsigned int eisa_in32(unsigned short port) +{ + if (EISA_bus) + return le32_to_cpu(gsc_readl(eisa_permute(port))); + return 0xffffffff; +} + +void eisa_out8(unsigned char data, unsigned short port) +{ + if (EISA_bus) + gsc_writeb(data, eisa_permute(port)); +} + +void eisa_out16(unsigned short data, unsigned short port) +{ + if (EISA_bus) + gsc_writew(cpu_to_le16(data), eisa_permute(port)); +} + +void eisa_out32(unsigned int data, unsigned short port) +{ + if (EISA_bus) + gsc_writel(cpu_to_le32(data), eisa_permute(port)); +} + +#ifndef CONFIG_PCI +/* We call these directly without PCI. See asm/io.h. */ +EXPORT_SYMBOL(eisa_in8); +EXPORT_SYMBOL(eisa_in16); +EXPORT_SYMBOL(eisa_in32); +EXPORT_SYMBOL(eisa_out8); +EXPORT_SYMBOL(eisa_out16); +EXPORT_SYMBOL(eisa_out32); +#endif + +/* Interrupt handling */ + +/* cached interrupt mask registers */ +static int master_mask; +static int slave_mask; + +/* the trig level can be set with the + * eisa_irq_edge=n,n,n commandline parameter + * We should really read this from the EEPROM + * in the furure. + */ +/* irq 13,8,2,1,0 must be edge */ +static unsigned int eisa_irq_level; /* default to edge triggered */ + + +/* called by free irq */ +static void eisa_disable_irq(unsigned int irq) +{ + unsigned long flags; + + EISA_DBG("disable irq %d\n", irq); + /* just mask for now */ + spin_lock_irqsave(&eisa_irq_lock, flags); + if (irq & 8) { + slave_mask |= (1 << (irq&7)); + eisa_out8(slave_mask, 0xa1); + } else { + master_mask |= (1 << (irq&7)); + eisa_out8(master_mask, 0x21); + } + spin_unlock_irqrestore(&eisa_irq_lock, flags); + EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21)); + EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1)); +} + +/* called by request irq */ +static void eisa_enable_irq(unsigned int irq) +{ + unsigned long flags; + EISA_DBG("enable irq %d\n", irq); + + spin_lock_irqsave(&eisa_irq_lock, flags); + if (irq & 8) { + slave_mask &= ~(1 << (irq&7)); + eisa_out8(slave_mask, 0xa1); + } else { + master_mask &= ~(1 << (irq&7)); + eisa_out8(master_mask, 0x21); + } + spin_unlock_irqrestore(&eisa_irq_lock, flags); + EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21)); + EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1)); +} + +static unsigned int eisa_startup_irq(unsigned int irq) +{ + eisa_enable_irq(irq); + return 0; +} + +static struct hw_interrupt_type eisa_interrupt_type = { + .typename = "EISA", + .startup = eisa_startup_irq, + .shutdown = eisa_disable_irq, + .enable = eisa_enable_irq, + .disable = eisa_disable_irq, + .ack = no_ack_irq, + .end = no_end_irq, +}; + +static irqreturn_t eisa_irq(int wax_irq, void *intr_dev, struct pt_regs *regs) +{ + int irq = gsc_readb(0xfc01f000); /* EISA supports 16 irqs */ + unsigned long flags; + + spin_lock_irqsave(&eisa_irq_lock, flags); + /* read IRR command */ + eisa_out8(0x0a, 0x20); + eisa_out8(0x0a, 0xa0); + + EISA_DBG("irq IAR %02x 8259-1 irr %02x 8259-2 irr %02x\n", + irq, eisa_in8(0x20), eisa_in8(0xa0)); + + /* read ISR command */ + eisa_out8(0x0a, 0x20); + eisa_out8(0x0a, 0xa0); + EISA_DBG("irq 8259-1 isr %02x imr %02x 8259-2 isr %02x imr %02x\n", + eisa_in8(0x20), eisa_in8(0x21), eisa_in8(0xa0), eisa_in8(0xa1)); + + irq &= 0xf; + + /* mask irq and write eoi */ + if (irq & 8) { + slave_mask |= (1 << (irq&7)); + eisa_out8(slave_mask, 0xa1); + eisa_out8(0x60 | (irq&7),0xa0);/* 'Specific EOI' to slave */ + eisa_out8(0x62,0x20); /* 'Specific EOI' to master-IRQ2 */ + + } else { + master_mask |= (1 << (irq&7)); + eisa_out8(master_mask, 0x21); + eisa_out8(0x60|irq,0x20); /* 'Specific EOI' to master */ + } + spin_unlock_irqrestore(&eisa_irq_lock, flags); + + __do_IRQ(irq, regs); + + spin_lock_irqsave(&eisa_irq_lock, flags); + /* unmask */ + if (irq & 8) { + slave_mask &= ~(1 << (irq&7)); + eisa_out8(slave_mask, 0xa1); + } else { + master_mask &= ~(1 << (irq&7)); + eisa_out8(master_mask, 0x21); + } + spin_unlock_irqrestore(&eisa_irq_lock, flags); + return IRQ_HANDLED; +} + +static irqreturn_t dummy_irq2_handler(int _, void *dev, struct pt_regs *regs) +{ + printk(KERN_ALERT "eisa: uhh, irq2?\n"); + return IRQ_HANDLED; +} + +static struct irqaction irq2_action = { + .handler = dummy_irq2_handler, + .name = "cascade", +}; + +static void init_eisa_pic(void) +{ + unsigned long flags; + + spin_lock_irqsave(&eisa_irq_lock, flags); + + eisa_out8(0xff, 0x21); /* mask during init */ + eisa_out8(0xff, 0xa1); /* mask during init */ + + /* master pic */ + eisa_out8(0x11,0x20); /* ICW1 */ + eisa_out8(0x00,0x21); /* ICW2 */ + eisa_out8(0x04,0x21); /* ICW3 */ + eisa_out8(0x01,0x21); /* ICW4 */ + eisa_out8(0x40,0x20); /* OCW2 */ + + /* slave pic */ + eisa_out8(0x11,0xa0); /* ICW1 */ + eisa_out8(0x08,0xa1); /* ICW2 */ + eisa_out8(0x02,0xa1); /* ICW3 */ + eisa_out8(0x01,0xa1); /* ICW4 */ + eisa_out8(0x40,0xa0); /* OCW2 */ + + udelay(100); + + slave_mask = 0xff; + master_mask = 0xfb; + eisa_out8(slave_mask, 0xa1); /* OCW1 */ + eisa_out8(master_mask, 0x21); /* OCW1 */ + + /* setup trig level */ + EISA_DBG("EISA edge/level %04x\n", eisa_irq_level); + + eisa_out8(eisa_irq_level&0xff, 0x4d0); /* Set all irq's to edge */ + eisa_out8((eisa_irq_level >> 8) & 0xff, 0x4d1); + + EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21)); + EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1)); + EISA_DBG("pic0 edge/level %02x\n", eisa_in8(0x4d0)); + EISA_DBG("pic1 edge/level %02x\n", eisa_in8(0x4d1)); + + spin_unlock_irqrestore(&eisa_irq_lock, flags); +} + +/* Device initialisation */ + +#define is_mongoose(dev) (dev->id.sversion == 0x00076) + +static int __devinit eisa_probe(struct parisc_device *dev) +{ + int i, result; + + char *name = is_mongoose(dev) ? "Mongoose" : "Wax"; + + printk(KERN_INFO "%s EISA Adapter found at 0x%08lx\n", + name, dev->hpa); + + eisa_dev.hba.dev = dev; + eisa_dev.hba.iommu = ccio_get_iommu(dev); + + eisa_dev.hba.lmmio_space.name = "EISA"; + eisa_dev.hba.lmmio_space.start = F_EXTEND(0xfc000000); + eisa_dev.hba.lmmio_space.end = F_EXTEND(0xffbfffff); + eisa_dev.hba.lmmio_space.flags = IORESOURCE_MEM; + result = ccio_request_resource(dev, &eisa_dev.hba.lmmio_space); + if (result < 0) { + printk(KERN_ERR "EISA: failed to claim EISA Bus address space!\n"); + return result; + } + eisa_dev.hba.io_space.name = "EISA"; + eisa_dev.hba.io_space.start = 0; + eisa_dev.hba.io_space.end = 0xffff; + eisa_dev.hba.lmmio_space.flags = IORESOURCE_IO; + result = request_resource(&ioport_resource, &eisa_dev.hba.io_space); + if (result < 0) { + printk(KERN_ERR "EISA: failed to claim EISA Bus port space!\n"); + return result; + } + pcibios_register_hba(&eisa_dev.hba); + + result = request_irq(dev->irq, eisa_irq, SA_SHIRQ, "EISA", &eisa_dev); + if (result) { + printk(KERN_ERR "EISA: request_irq failed!\n"); + return result; + } + + /* Reserve IRQ2 */ + irq_desc[2].action = &irq2_action; + + for (i = 0; i < 16; i++) { + irq_desc[i].handler = &eisa_interrupt_type; + } + + EISA_bus = 1; + + if (dev->num_addrs) { + /* newer firmware hand out the eeprom address */ + eisa_dev.eeprom_addr = dev->addr[0]; + } else { + /* old firmware, need to figure out the box */ + if (is_mongoose(dev)) { + eisa_dev.eeprom_addr = SNAKES_EEPROM_BASE_ADDR; + } else { + eisa_dev.eeprom_addr = MIRAGE_EEPROM_BASE_ADDR; + } + } + eisa_eeprom_addr = ioremap(eisa_dev.eeprom_addr, HPEE_MAX_LENGTH); + result = eisa_enumerator(eisa_dev.eeprom_addr, &eisa_dev.hba.io_space, + &eisa_dev.hba.lmmio_space); + init_eisa_pic(); + + if (result >= 0) { + /* FIXME : Don't enumerate the bus twice. */ + eisa_dev.root.dev = &dev->dev; + dev->dev.driver_data = &eisa_dev.root; + eisa_dev.root.bus_base_addr = 0; + eisa_dev.root.res = &eisa_dev.hba.io_space; + eisa_dev.root.slots = result; + eisa_dev.root.dma_mask = 0xffffffff; /* wild guess */ + if (eisa_root_register (&eisa_dev.root)) { + printk(KERN_ERR "EISA: Failed to register EISA root\n"); + return -1; + } + } + + return 0; +} + +static struct parisc_device_id eisa_tbl[] = { + { HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00076 }, /* Mongoose */ + { HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00090 }, /* Wax EISA */ + { 0, } +}; + +MODULE_DEVICE_TABLE(parisc, eisa_tbl); + +static struct parisc_driver eisa_driver = { + .name = "EISA Bus Adapter", + .id_table = eisa_tbl, + .probe = eisa_probe, +}; + +void __init eisa_init(void) +{ + register_parisc_driver(&eisa_driver); +} + + +static unsigned int eisa_irq_configured; +void eisa_make_irq_level(int num) +{ + if (eisa_irq_configured& (1<<num)) { + printk(KERN_WARNING + "IRQ %d polarity configured twice (last to level)\n", + num); + } + eisa_irq_level |= (1<<num); /* set the corresponding bit */ + eisa_irq_configured |= (1<<num); /* set the corresponding bit */ +} + +void eisa_make_irq_edge(int num) +{ + if (eisa_irq_configured& (1<<num)) { + printk(KERN_WARNING + "IRQ %d polarity configured twice (last to edge)\n", + num); + } + eisa_irq_level &= ~(1<<num); /* clear the corresponding bit */ + eisa_irq_configured |= (1<<num); /* set the corresponding bit */ +} + +static int __init eisa_irq_setup(char *str) +{ + char *cur = str; + int val; + + EISA_DBG("IRQ setup\n"); + while (cur != NULL) { + char *pe; + + val = (int) simple_strtoul(cur, &pe, 0); + if (val > 15 || val < 0) { + printk(KERN_ERR "eisa: EISA irq value are 0-15\n"); + continue; + } + if (val == 2) { + val = 9; + } + eisa_make_irq_edge(val); /* clear the corresponding bit */ + EISA_DBG("setting IRQ %d to edge-triggered mode\n", val); + + if ((cur = strchr(cur, ','))) { + cur++; + } else { + break; + } + } + return 1; +} + +__setup("eisa_irq_edge=", eisa_irq_setup); + |