diff options
author | Hannes Reinecke <hare@suse.de> | 2006-01-12 12:08:06 +0100 |
---|---|---|
committer | James Bottomley <jejb@mulgrave.(none)> | 2006-01-12 12:03:50 -0600 |
commit | 11668bb673c41ec169a85d0b52c538a1c11d29e1 (patch) | |
tree | 423c30e22eea305d5c059c6463bdd226c1734bf4 /drivers/scsi/aic7xxx/aic79xx_core.c | |
parent | ba62cd2d01e401faa5d5a25fa8e990d0b1a1996a (diff) | |
download | kernel_samsung_smdk4412-11668bb673c41ec169a85d0b52c538a1c11d29e1.zip kernel_samsung_smdk4412-11668bb673c41ec169a85d0b52c538a1c11d29e1.tar.gz kernel_samsung_smdk4412-11668bb673c41ec169a85d0b52c538a1c11d29e1.tar.bz2 |
[SCSI] aic79xx: Sequencer update
Update sequencer code to Adaptec version 2.0.12-6.3.9.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'drivers/scsi/aic7xxx/aic79xx_core.c')
-rw-r--r-- | drivers/scsi/aic7xxx/aic79xx_core.c | 665 |
1 files changed, 376 insertions, 289 deletions
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c index 35b51e1..db8f5ce 100644 --- a/drivers/scsi/aic7xxx/aic79xx_core.c +++ b/drivers/scsi/aic7xxx/aic79xx_core.c @@ -37,9 +37,7 @@ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. * - * $Id: //depot/aic7xxx/aic7xxx/aic79xx.c#202 $ - * - * $FreeBSD$ + * $Id: //depot/aic7xxx/aic7xxx/aic79xx.c#247 $ */ #ifdef __linux__ @@ -332,6 +330,14 @@ ahd_restart(struct ahd_softc *ahd) ahd_outb(ahd, SCSISEQ1, ahd_inb(ahd, SCSISEQ_TEMPLATE) & (ENSELI|ENRSELI|ENAUTOATNP)); ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); + + /* + * Clear any pending sequencer interrupt. It is no + * longer relevant since we're resetting the Program + * Counter. + */ + ahd_outb(ahd, CLRINT, CLRSEQINT); + ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET); ahd_unpause(ahd); } @@ -373,13 +379,7 @@ ahd_flush_qoutfifo(struct ahd_softc *ahd) saved_modes = ahd_save_modes(ahd); /* - * Complete any SCBs that just finished being - * DMA'ed into the qoutfifo. - */ - ahd_run_qoutfifo(ahd); - - /* - * Flush the good status FIFO for compelted packetized commands. + * Flush the good status FIFO for completed packetized commands. */ ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); saved_scbptr = ahd_get_scbptr(ahd); @@ -400,22 +400,33 @@ ahd_flush_qoutfifo(struct ahd_softc *ahd) * the host before completing the command. */ fifo_mode = 0; +rescan_fifos: for (i = 0; i < 2; i++) { /* Toggle to the other mode. */ fifo_mode ^= 1; ahd_set_modes(ahd, fifo_mode, fifo_mode); + if (ahd_scb_active_in_fifo(ahd, scb) == 0) continue; ahd_run_data_fifo(ahd, scb); /* - * Clearing this transaction in this FIFO may - * cause a CFG4DATA for this same transaction - * to assert in the other FIFO. Make sure we - * loop one more time and check the other FIFO. + * Running this FIFO may cause a CFG4DATA for + * this same transaction to assert in the other + * FIFO or a new snapshot SAVEPTRS interrupt + * in this FIFO. Even running a FIFO may not + * clear the transaction if we are still waiting + * for data to drain to the host. We must loop + * until the transaction is not active in either + * FIFO just to be sure. Reset our loop counter + * so we will visit both FIFOs again before + * declaring this transaction finished. We + * also delay a bit so that status has a chance + * to change before we look at this FIFO again. */ - i = 0; + ahd_delay(200); + goto rescan_fifos; } ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); ahd_set_scbptr(ahd, scbid); @@ -428,19 +439,28 @@ ahd_flush_qoutfifo(struct ahd_softc *ahd) /* * The transfer completed with a residual. * Place this SCB on the complete DMA list - * so that we Update our in-core copy of the + * so that we update our in-core copy of the * SCB before completing the command. */ ahd_outb(ahd, SCB_SCSI_STATUS, 0); ahd_outb(ahd, SCB_SGPTR, ahd_inb_scbram(ahd, SCB_SGPTR) | SG_STATUS_VALID); - ahd_outw(ahd, SCB_TAG, SCB_GET_TAG(scb)); + ahd_outw(ahd, SCB_TAG, scbid); + ahd_outw(ahd, SCB_NEXT_COMPLETE, SCB_LIST_NULL); comp_head = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD); - ahd_outw(ahd, SCB_NEXT_COMPLETE, comp_head); - if (SCBID_IS_NULL(comp_head)) - ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, - SCB_GET_TAG(scb)); + if (SCBID_IS_NULL(comp_head)) { + ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, scbid); + ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, scbid); + } else { + u_int tail; + + tail = ahd_inw(ahd, COMPLETE_DMA_SCB_TAIL); + ahd_set_scbptr(ahd, tail); + ahd_outw(ahd, SCB_NEXT_COMPLETE, scbid); + ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, scbid); + ahd_set_scbptr(ahd, scbid); + } } else ahd_complete_scb(ahd, scb); } @@ -464,9 +484,22 @@ ahd_flush_qoutfifo(struct ahd_softc *ahd) break; ahd_delay(200); } - if ((ccscbctl & CCSCBDIR) != 0) + /* + * We leave the sequencer to cleanup in the case of DMA's to + * update the qoutfifo. In all other cases (DMA's to the + * chip or a push of an SCB from the COMPLETE_DMA_SCB list), + * we disable the DMA engine so that the sequencer will not + * attempt to handle the DMA completion. + */ + if ((ccscbctl & CCSCBDIR) != 0 || (ccscbctl & ARRDONE) != 0) ahd_outb(ahd, CCSCBCTL, ccscbctl & ~(CCARREN|CCSCBEN)); + /* + * Complete any SCBs that just finished + * being DMA'ed into the qoutfifo. + */ + ahd_run_qoutfifo(ahd); + saved_scbptr = ahd_get_scbptr(ahd); /* * Manually update/complete any completed SCBs that are waiting to be @@ -493,6 +526,24 @@ ahd_flush_qoutfifo(struct ahd_softc *ahd) scbid = next_scbid; } ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL); + ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, SCB_LIST_NULL); + + scbid = ahd_inw(ahd, COMPLETE_ON_QFREEZE_HEAD); + while (!SCBID_IS_NULL(scbid)) { + + ahd_set_scbptr(ahd, scbid); + next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); + scb = ahd_lookup_scb(ahd, scbid); + if (scb == NULL) { + printf("%s: Warning - Complete Qfrz SCB %d invalid\n", + ahd_name(ahd), scbid); + continue; + } + + ahd_complete_scb(ahd, scb); + scbid = next_scbid; + } + ahd_outw(ahd, COMPLETE_ON_QFREEZE_HEAD, SCB_LIST_NULL); scbid = ahd_inw(ahd, COMPLETE_SCB_HEAD); while (!SCBID_IS_NULL(scbid)) { @@ -557,150 +608,146 @@ ahd_run_data_fifo(struct ahd_softc *ahd, struct scb *scb) { u_int seqintsrc; - while (1) { - seqintsrc = ahd_inb(ahd, SEQINTSRC); - if ((seqintsrc & CFG4DATA) != 0) { - uint32_t datacnt; - uint32_t sgptr; - - /* - * Clear full residual flag. - */ - sgptr = ahd_inl_scbram(ahd, SCB_SGPTR) & ~SG_FULL_RESID; - ahd_outb(ahd, SCB_SGPTR, sgptr); + seqintsrc = ahd_inb(ahd, SEQINTSRC); + if ((seqintsrc & CFG4DATA) != 0) { + uint32_t datacnt; + uint32_t sgptr; - /* - * Load datacnt and address. - */ - datacnt = ahd_inl_scbram(ahd, SCB_DATACNT); - if ((datacnt & AHD_DMA_LAST_SEG) != 0) { - sgptr |= LAST_SEG; - ahd_outb(ahd, SG_STATE, 0); - } else - ahd_outb(ahd, SG_STATE, LOADING_NEEDED); - ahd_outq(ahd, HADDR, ahd_inq_scbram(ahd, SCB_DATAPTR)); - ahd_outl(ahd, HCNT, datacnt & AHD_SG_LEN_MASK); - ahd_outb(ahd, SG_CACHE_PRE, sgptr); - ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN); + /* + * Clear full residual flag. + */ + sgptr = ahd_inl_scbram(ahd, SCB_SGPTR) & ~SG_FULL_RESID; + ahd_outb(ahd, SCB_SGPTR, sgptr); - /* - * Initialize Residual Fields. - */ - ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, datacnt >> 24); - ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr & SG_PTR_MASK); + /* + * Load datacnt and address. + */ + datacnt = ahd_inl_scbram(ahd, SCB_DATACNT); + if ((datacnt & AHD_DMA_LAST_SEG) != 0) { + sgptr |= LAST_SEG; + ahd_outb(ahd, SG_STATE, 0); + } else + ahd_outb(ahd, SG_STATE, LOADING_NEEDED); + ahd_outq(ahd, HADDR, ahd_inq_scbram(ahd, SCB_DATAPTR)); + ahd_outl(ahd, HCNT, datacnt & AHD_SG_LEN_MASK); + ahd_outb(ahd, SG_CACHE_PRE, sgptr); + ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN); - /* - * Mark the SCB as having a FIFO in use. - */ - ahd_outb(ahd, SCB_FIFO_USE_COUNT, - ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) + 1); + /* + * Initialize Residual Fields. + */ + ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, datacnt >> 24); + ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr & SG_PTR_MASK); - /* - * Install a "fake" handler for this FIFO. - */ - ahd_outw(ahd, LONGJMP_ADDR, 0); + /* + * Mark the SCB as having a FIFO in use. + */ + ahd_outb(ahd, SCB_FIFO_USE_COUNT, + ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) + 1); - /* - * Notify the hardware that we have satisfied - * this sequencer interrupt. - */ - ahd_outb(ahd, CLRSEQINTSRC, CLRCFG4DATA); - } else if ((seqintsrc & SAVEPTRS) != 0) { - uint32_t sgptr; - uint32_t resid; + /* + * Install a "fake" handler for this FIFO. + */ + ahd_outw(ahd, LONGJMP_ADDR, 0); - if ((ahd_inb(ahd, LONGJMP_ADDR+1)&INVALID_ADDR) != 0) { - /* - * Snapshot Save Pointers. Clear - * the snapshot and continue. - */ - ahd_outb(ahd, DFFSXFRCTL, CLRCHN); - continue; - } + /* + * Notify the hardware that we have satisfied + * this sequencer interrupt. + */ + ahd_outb(ahd, CLRSEQINTSRC, CLRCFG4DATA); + } else if ((seqintsrc & SAVEPTRS) != 0) { + uint32_t sgptr; + uint32_t resid; + if ((ahd_inb(ahd, LONGJMP_ADDR+1)&INVALID_ADDR) != 0) { /* - * Disable S/G fetch so the DMA engine - * is available to future users. + * Snapshot Save Pointers. All that + * is necessary to clear the snapshot + * is a CLRCHN. */ - if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) - ahd_outb(ahd, CCSGCTL, 0); - ahd_outb(ahd, SG_STATE, 0); + goto clrchn; + } - /* - * Flush the data FIFO. Strickly only - * necessary for Rev A parts. - */ - ahd_outb(ahd, DFCNTRL, - ahd_inb(ahd, DFCNTRL) | FIFOFLUSH); + /* + * Disable S/G fetch so the DMA engine + * is available to future users. + */ + if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) + ahd_outb(ahd, CCSGCTL, 0); + ahd_outb(ahd, SG_STATE, 0); - /* - * Calculate residual. - */ - sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); - resid = ahd_inl(ahd, SHCNT); - resid |= - ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT+3) << 24; - ahd_outl(ahd, SCB_RESIDUAL_DATACNT, resid); - if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG) == 0) { - /* - * Must back up to the correct S/G element. - * Typically this just means resetting our - * low byte to the offset in the SG_CACHE, - * but if we wrapped, we have to correct - * the other bytes of the sgptr too. - */ - if ((ahd_inb(ahd, SG_CACHE_SHADOW) & 0x80) != 0 - && (sgptr & 0x80) == 0) - sgptr -= 0x100; - sgptr &= ~0xFF; - sgptr |= ahd_inb(ahd, SG_CACHE_SHADOW) - & SG_ADDR_MASK; - ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); - ahd_outb(ahd, SCB_RESIDUAL_DATACNT + 3, 0); - } else if ((resid & AHD_SG_LEN_MASK) == 0) { - ahd_outb(ahd, SCB_RESIDUAL_SGPTR, - sgptr | SG_LIST_NULL); - } - /* - * Save Pointers. - */ - ahd_outq(ahd, SCB_DATAPTR, ahd_inq(ahd, SHADDR)); - ahd_outl(ahd, SCB_DATACNT, resid); - ahd_outl(ahd, SCB_SGPTR, sgptr); - ahd_outb(ahd, CLRSEQINTSRC, CLRSAVEPTRS); - ahd_outb(ahd, SEQIMODE, - ahd_inb(ahd, SEQIMODE) | ENSAVEPTRS); - /* - * If the data is to the SCSI bus, we are - * done, otherwise wait for FIFOEMP. - */ - if ((ahd_inb(ahd, DFCNTRL) & DIRECTION) != 0) - break; - } else if ((ahd_inb(ahd, SG_STATE) & LOADING_NEEDED) != 0) { - uint32_t sgptr; - uint64_t data_addr; - uint32_t data_len; - u_int dfcntrl; + /* + * Flush the data FIFO. Strickly only + * necessary for Rev A parts. + */ + ahd_outb(ahd, DFCNTRL, ahd_inb(ahd, DFCNTRL) | FIFOFLUSH); + /* + * Calculate residual. + */ + sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); + resid = ahd_inl(ahd, SHCNT); + resid |= ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT+3) << 24; + ahd_outl(ahd, SCB_RESIDUAL_DATACNT, resid); + if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG) == 0) { /* - * Disable S/G fetch so the DMA engine - * is available to future users. + * Must back up to the correct S/G element. + * Typically this just means resetting our + * low byte to the offset in the SG_CACHE, + * but if we wrapped, we have to correct + * the other bytes of the sgptr too. */ - if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) { - ahd_outb(ahd, CCSGCTL, 0); - ahd_outb(ahd, SG_STATE, LOADING_NEEDED); - } + if ((ahd_inb(ahd, SG_CACHE_SHADOW) & 0x80) != 0 + && (sgptr & 0x80) == 0) + sgptr -= 0x100; + sgptr &= ~0xFF; + sgptr |= ahd_inb(ahd, SG_CACHE_SHADOW) + & SG_ADDR_MASK; + ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); + ahd_outb(ahd, SCB_RESIDUAL_DATACNT + 3, 0); + } else if ((resid & AHD_SG_LEN_MASK) == 0) { + ahd_outb(ahd, SCB_RESIDUAL_SGPTR, + sgptr | SG_LIST_NULL); + } + /* + * Save Pointers. + */ + ahd_outq(ahd, SCB_DATAPTR, ahd_inq(ahd, SHADDR)); + ahd_outl(ahd, SCB_DATACNT, resid); + ahd_outl(ahd, SCB_SGPTR, sgptr); + ahd_outb(ahd, CLRSEQINTSRC, CLRSAVEPTRS); + ahd_outb(ahd, SEQIMODE, + ahd_inb(ahd, SEQIMODE) | ENSAVEPTRS); + /* + * If the data is to the SCSI bus, we are + * done, otherwise wait for FIFOEMP. + */ + if ((ahd_inb(ahd, DFCNTRL) & DIRECTION) != 0) + goto clrchn; + } else if ((ahd_inb(ahd, SG_STATE) & LOADING_NEEDED) != 0) { + uint32_t sgptr; + uint64_t data_addr; + uint32_t data_len; + u_int dfcntrl; - /* - * Wait for the DMA engine to notice that the - * host transfer is enabled and that there is - * space in the S/G FIFO for new segments before - * loading more segments. - */ - if ((ahd_inb(ahd, DFSTATUS) & PRELOAD_AVAIL) == 0) - continue; - if ((ahd_inb(ahd, DFCNTRL) & HDMAENACK) == 0) - continue; + /* + * Disable S/G fetch so the DMA engine + * is available to future users. We won't + * be using the DMA engine to load segments. + */ + if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) { + ahd_outb(ahd, CCSGCTL, 0); + ahd_outb(ahd, SG_STATE, LOADING_NEEDED); + } + + /* + * Wait for the DMA engine to notice that the + * host transfer is enabled and that there is + * space in the S/G FIFO for new segments before + * loading more segments. + */ + if ((ahd_inb(ahd, DFSTATUS) & PRELOAD_AVAIL) != 0 + && (ahd_inb(ahd, DFCNTRL) & HDMAENACK) != 0) { /* * Determine the offset of the next S/G @@ -756,35 +803,44 @@ ahd_run_data_fifo(struct ahd_softc *ahd, struct scb *scb) dfcntrl |= SCSIENWRDIS; } ahd_outb(ahd, DFCNTRL, dfcntrl); - } else if ((ahd_inb(ahd, SG_CACHE_SHADOW) - & LAST_SEG_DONE) != 0) { - - /* - * Transfer completed to the end of SG list - * and has flushed to the host. - */ - ahd_outb(ahd, SCB_SGPTR, - ahd_inb_scbram(ahd, SCB_SGPTR) | SG_LIST_NULL); - break; - } else if ((ahd_inb(ahd, DFSTATUS) & FIFOEMP) != 0) { - break; } - ahd_delay(200); + } else if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG_DONE) != 0) { + + /* + * Transfer completed to the end of SG list + * and has flushed to the host. + */ + ahd_outb(ahd, SCB_SGPTR, + ahd_inb_scbram(ahd, SCB_SGPTR) | SG_LIST_NULL); + goto clrchn; + } else if ((ahd_inb(ahd, DFSTATUS) & FIFOEMP) != 0) { +clrchn: + /* + * Clear any handler for this FIFO, decrement + * the FIFO use count for the SCB, and release + * the FIFO. + */ + ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); + ahd_outb(ahd, SCB_FIFO_USE_COUNT, + ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) - 1); + ahd_outb(ahd, DFFSXFRCTL, CLRCHN); } - /* - * Clear any handler for this FIFO, decrement - * the FIFO use count for the SCB, and release - * the FIFO. - */ - ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); - ahd_outb(ahd, SCB_FIFO_USE_COUNT, - ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) - 1); - ahd_outb(ahd, DFFSXFRCTL, CLRCHN); } +/* + * Look for entries in the QoutFIFO that have completed. + * The valid_tag completion field indicates the validity + * of the entry - the valid value toggles each time through + * the queue. We use the sg_status field in the completion + * entry to avoid referencing the hscb if the completion + * occurred with no errors and no residual. sg_status is + * a copy of the first byte (little endian) of the sgptr + * hscb field. + */ void ahd_run_qoutfifo(struct ahd_softc *ahd) { + struct ahd_completion *completion; struct scb *scb; u_int scb_index; @@ -792,11 +848,13 @@ ahd_run_qoutfifo(struct ahd_softc *ahd) panic("ahd_run_qoutfifo recursion"); ahd->flags |= AHD_RUNNING_QOUTFIFO; ahd_sync_qoutfifo(ahd, BUS_DMASYNC_POSTREAD); - while ((ahd->qoutfifo[ahd->qoutfifonext] - & QOUTFIFO_ENTRY_VALID_LE) == ahd->qoutfifonext_valid_tag) { + for (;;) { + completion = &ahd->qoutfifo[ahd->qoutfifonext]; + + if (completion->valid_tag != ahd->qoutfifonext_valid_tag) + break; - scb_index = ahd_le16toh(ahd->qoutfifo[ahd->qoutfifonext] - & ~QOUTFIFO_ENTRY_VALID_LE); + scb_index = ahd_le16toh(completion->tag); scb = ahd_lookup_scb(ahd, scb_index); if (scb == NULL) { printf("%s: WARNING no command for scb %d " @@ -804,12 +862,15 @@ ahd_run_qoutfifo(struct ahd_softc *ahd) ahd_name(ahd), scb_index, ahd->qoutfifonext); ahd_dump_card_state(ahd); - } else - ahd_complete_scb(ahd, scb); + } else if ((completion->sg_status & SG_STATUS_VALID) != 0) { + ahd_handle_scb_status(ahd, scb); + } else { + ahd_done(ahd, scb); + } ahd->qoutfifonext = (ahd->qoutfifonext+1) & (AHD_QOUT_SIZE-1); if (ahd->qoutfifonext == 0) - ahd->qoutfifonext_valid_tag ^= QOUTFIFO_ENTRY_VALID_LE; + ahd->qoutfifonext_valid_tag ^= QOUTFIFO_ENTRY_VALID; } ahd->flags &= ~AHD_RUNNING_QOUTFIFO; } @@ -875,26 +936,6 @@ ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat) ahd_name(ahd), seqintcode); #endif switch (seqintcode) { - case BAD_SCB_STATUS: - { - struct scb *scb; - u_int scbid; - int cmds_pending; - - scbid = ahd_get_scbptr(ahd); - scb = ahd_lookup_scb(ahd, scbid); - if (scb != NULL) { - ahd_complete_scb(ahd, scb); - } else { - printf("%s: WARNING no command for scb %d " - "(bad status)\n", ahd_name(ahd), scbid); - ahd_dump_card_state(ahd); - } - cmds_pending = ahd_inw(ahd, CMDS_PENDING); - if (cmds_pending > 0) - ahd_outw(ahd, CMDS_PENDING, cmds_pending - 1); - break; - } case ENTERING_NONPACK: { struct scb *scb; @@ -1502,9 +1543,6 @@ ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat) && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0) scb = NULL; - /* Make sure the sequencer is in a safe location. */ - ahd_clear_critical_section(ahd); - if ((status0 & IOERR) != 0) { u_int now_lvd; @@ -1520,26 +1558,35 @@ ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat) ahd_setup_iocell_workaround(ahd); ahd_unpause(ahd); } else if ((status0 & OVERRUN) != 0) { + printf("%s: SCSI offset overrun detected. Resetting bus.\n", ahd_name(ahd)); ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); } else if ((status & SCSIRSTI) != 0) { + printf("%s: Someone reset channel A\n", ahd_name(ahd)); ahd_reset_channel(ahd, 'A', /*Initiate Reset*/FALSE); } else if ((status & SCSIPERR) != 0) { + + /* Make sure the sequencer is in a safe location. */ + ahd_clear_critical_section(ahd); + ahd_handle_transmission_error(ahd); } else if (lqostat0 != 0) { + printf("%s: lqostat0 == 0x%x!\n", ahd_name(ahd), lqostat0); ahd_outb(ahd, CLRLQOINT0, lqostat0); - if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) { + if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) ahd_outb(ahd, CLRLQOINT1, 0); - } } else if ((status & SELTO) != 0) { u_int scbid; /* Stop the selection */ ahd_outb(ahd, SCSISEQ0, 0); + /* Make sure the sequencer is in a safe location. */ + ahd_clear_critical_section(ahd); + /* No more pending messages */ ahd_clear_msg_state(ahd); @@ -1572,24 +1619,27 @@ ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat) scbid); } #endif - /* - * Force a renegotiation with this target just in - * case the cable was pulled and will later be - * re-attached. The target may forget its negotiation - * settings with us should it attempt to reselect - * during the interruption. The target will not issue - * a unit attention in this case, so we must always - * renegotiate. - */ ahd_scb_devinfo(ahd, &devinfo, scb); - ahd_force_renegotiation(ahd, &devinfo); ahd_set_transaction_status(scb, CAM_SEL_TIMEOUT); ahd_freeze_devq(ahd, scb); + + /* + * Cancel any pending transactions on the device + * now that it seems to be missing. This will + * also revert us to async/narrow transfers until + * we can renegotiate with the device. + */ + ahd_handle_devreset(ahd, &devinfo, + CAM_LUN_WILDCARD, + CAM_SEL_TIMEOUT, + "Selection Timeout", + /*verbose_level*/1); } ahd_outb(ahd, CLRINT, CLRSCSIINT); ahd_iocell_first_selection(ahd); ahd_unpause(ahd); } else if ((status0 & (SELDI|SELDO)) != 0) { + ahd_iocell_first_selection(ahd); ahd_unpause(ahd); } else if (status3 != 0) { @@ -1597,6 +1647,10 @@ ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat) ahd_name(ahd), status3); ahd_outb(ahd, CLRSINT3, status3); } else if ((lqistat1 & (LQIPHASE_LQ|LQIPHASE_NLQ)) != 0) { + + /* Make sure the sequencer is in a safe location. */ + ahd_clear_critical_section(ahd); + ahd_handle_lqiphase_error(ahd, lqistat1); } else if ((lqistat1 & LQICRCI_NLQ) != 0) { /* @@ -1621,6 +1675,9 @@ ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat) */ ahd_outb(ahd, SCSISEQ0, 0); + /* Make sure the sequencer is in a safe location. */ + ahd_clear_critical_section(ahd); + /* * Determine what we were up to at the time of * the busfree. @@ -1658,7 +1715,16 @@ ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat) clear_fifo = 0; packetized = (lqostat1 & LQOBUSFREE) != 0; if (!packetized - && ahd_inb(ahd, LASTPHASE) == P_BUSFREE) + && ahd_inb(ahd, LASTPHASE) == P_BUSFREE + && (ahd_inb(ahd, SSTAT0) & SELDI) == 0 + && ((ahd_inb(ahd, SSTAT0) & SELDO) == 0 + || (ahd_inb(ahd, SCSISEQ0) & ENSELO) == 0)) + /* + * Assume packetized if we are not + * on the bus in a non-packetized + * capacity and any pending selection + * was a packetized selection. + */ packetized = 1; break; } @@ -3193,14 +3259,25 @@ ahd_update_neg_table(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= ~AHD_PRECOMP_MASK; if ((ahd->features & AHD_NEW_IOCELL_OPTS) != 0 - && (ppr_opts & MSG_EXT_PPR_DT_REQ) != 0) { + && (ppr_opts & MSG_EXT_PPR_DT_REQ) != 0 + && (ppr_opts & MSG_EXT_PPR_IU_REQ) == 0) { /* * Slow down our CRC interval to be - * compatible with devices that can't - * handle a CRC at full speed. + * compatible with non-packetized + * U160 devices that can't handle a + * CRC at full speed. */ con_opts |= ENSLOWCRC; } + + if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) { + /* + * On H2A4, revert to a slower slewrate + * on non-paced transfers. + */ + iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= + ~AHD_SLEWRATE_MASK; + } } ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PRECOMP_SLEW); @@ -3289,11 +3366,15 @@ ahd_update_pending_scbs(struct ahd_softc *ahd) * Force the sequencer to reinitialize the selection for * the command at the head of the execution queue if it * has already been setup. The negotiation changes may - * effect whether we select-out with ATN. + * effect whether we select-out with ATN. It is only + * safe to clear ENSELO when the bus is not free and no + * selection is in progres or completed. */ saved_modes = ahd_save_modes(ahd); ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); - ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); + if ((ahd_inb(ahd, SCSISIGI) & BSYI) != 0 + && (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) == 0) + ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); saved_scbptr = ahd_get_scbptr(ahd); /* Ensure that the hscbs down on the card match the new information */ for (scb_tag = 0; scb_tag < ahd->scb_data.maxhscbs; scb_tag++) { @@ -4999,13 +5080,14 @@ ahd_handle_devreset(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT, AHD_TRANS_CUR, /*paused*/TRUE); ahd_set_syncrate(ahd, devinfo, /*period*/0, /*offset*/0, - /*ppr_options*/0, AHD_TRANS_CUR, /*paused*/TRUE); + /*ppr_options*/0, AHD_TRANS_CUR, + /*paused*/TRUE); - ahd_send_async(ahd, devinfo->channel, devinfo->target, - lun, AC_SENT_BDR, NULL); + if (status != CAM_SEL_TIMEOUT) + ahd_send_async(ahd, devinfo->channel, devinfo->target, + CAM_LUN_WILDCARD, AC_SENT_BDR, NULL); - if (message != NULL - && (verbose_level <= bootverbose)) + if (message != NULL && bootverbose) printf("%s: %s on %c:%d. %d SCBs aborted\n", ahd_name(ahd), message, devinfo->channel, devinfo->target, found); } @@ -5963,16 +6045,13 @@ ahd_alloc_scbs(struct ahd_softc *ahd) newcount = MIN(scb_data->sense_left, scb_data->scbs_left); newcount = MIN(newcount, scb_data->sgs_left); newcount = MIN(newcount, (AHD_SCB_MAX_ALLOC - scb_data->numscbs)); - scb_data->sense_left -= newcount; - scb_data->scbs_left -= newcount; - scb_data->sgs_left -= newcount; for (i = 0; i < newcount; i++) { - u_int col_tag; - struct scb_platform_data *pdata; + u_int col_tag; #ifndef __linux__ int error; #endif + next_scb = (struct scb *)malloc(sizeof(*next_scb), M_DEVBUF, M_NOWAIT); if (next_scb == NULL) @@ -6029,6 +6108,9 @@ ahd_alloc_scbs(struct ahd_softc *ahd) sense_data += AHD_SENSE_BUFSIZE; sense_busaddr += AHD_SENSE_BUFSIZE; scb_data->numscbs++; + scb_data->sense_left--; + scb_data->scbs_left--; + scb_data->sgs_left--; } } @@ -6143,7 +6225,7 @@ ahd_init(struct ahd_softc *ahd) * for the target mode role, we must additionally provide space for * the incoming target command fifo. */ - driver_data_size = AHD_SCB_MAX * sizeof(uint16_t) + driver_data_size = AHD_SCB_MAX * sizeof(*ahd->qoutfifo) + sizeof(struct hardware_scb); if ((ahd->features & AHD_TARGETMODE) != 0) driver_data_size += AHD_TMODE_CMDS * sizeof(struct target_cmd); @@ -6178,10 +6260,10 @@ ahd_init(struct ahd_softc *ahd) ahd->shared_data_map.vaddr, driver_data_size, ahd_dmamap_cb, &ahd->shared_data_map.physaddr, /*flags*/0); - ahd->qoutfifo = (uint16_t *)ahd->shared_data_map.vaddr; + ahd->qoutfifo = (struct ahd_completion *)ahd->shared_data_map.vaddr; next_vaddr = (uint8_t *)&ahd->qoutfifo[AHD_QOUT_SIZE]; next_baddr = ahd->shared_data_map.physaddr - + AHD_QOUT_SIZE*sizeof(uint16_t); + + AHD_QOUT_SIZE*sizeof(struct ahd_completion); if ((ahd->features & AHD_TARGETMODE) != 0) { ahd->targetcmds = (struct target_cmd *)next_vaddr; next_vaddr += AHD_TMODE_CMDS * sizeof(struct target_cmd); @@ -6508,10 +6590,10 @@ ahd_chip_init(struct ahd_softc *ahd) /* All of our queues are empty */ ahd->qoutfifonext = 0; - ahd->qoutfifonext_valid_tag = QOUTFIFO_ENTRY_VALID_LE; - ahd_outb(ahd, QOUTFIFO_ENTRY_VALID_TAG, QOUTFIFO_ENTRY_VALID >> 8); + ahd->qoutfifonext_valid_tag = QOUTFIFO_ENTRY_VALID; + ahd_outb(ahd, QOUTFIFO_ENTRY_VALID_TAG, QOUTFIFO_ENTRY_VALID); for (i = 0; i < AHD_QOUT_SIZE; i++) - ahd->qoutfifo[i] = 0; + ahd->qoutfifo[i].valid_tag = 0; ahd_sync_qoutfifo(ahd, BUS_DMASYNC_PREREAD); ahd->qinfifonext = 0; @@ -6544,12 +6626,15 @@ ahd_chip_init(struct ahd_softc *ahd) ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL); ahd_outw(ahd, COMPLETE_SCB_DMAINPROG_HEAD, SCB_LIST_NULL); ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL); + ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, SCB_LIST_NULL); + ahd_outw(ahd, COMPLETE_ON_QFREEZE_HEAD, SCB_LIST_NULL); /* * The Freeze Count is 0. */ ahd->qfreeze_cnt = 0; ahd_outw(ahd, QFREEZE_COUNT, 0); + ahd_outw(ahd, KERNEL_QFREEZE_COUNT, 0); /* * Tell the sequencer where it can find our arrays in memory. @@ -6909,43 +6994,34 @@ ahd_pause_and_flushwork(struct ahd_softc *ahd) { u_int intstat; u_int maxloops; - u_int qfreeze_cnt; maxloops = 1000; ahd->flags |= AHD_ALL_INTERRUPTS; ahd_pause(ahd); /* - * Increment the QFreeze Count so that the sequencer - * will not start new selections. We do this only + * Freeze the outgoing selections. We do this only * until we are safely paused without further selections * pending. */ - ahd_outw(ahd, QFREEZE_COUNT, ahd_inw(ahd, QFREEZE_COUNT) + 1); + ahd->qfreeze_cnt--; + ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt); ahd_outb(ahd, SEQ_FLAGS2, ahd_inb(ahd, SEQ_FLAGS2) | SELECTOUT_QFROZEN); do { - struct scb *waiting_scb; ahd_unpause(ahd); + /* + * Give the sequencer some time to service + * any active selections. + */ + ahd_delay(500); + ahd_intr(ahd); ahd_pause(ahd); - ahd_clear_critical_section(ahd); intstat = ahd_inb(ahd, INTSTAT); - ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); - if ((ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) == 0) - ahd_outb(ahd, SCSISEQ0, - ahd_inb(ahd, SCSISEQ0) & ~ENSELO); - /* - * In the non-packetized case, the sequencer (for Rev A), - * relies on ENSELO remaining set after SELDO. The hardware - * auto-clears ENSELO in the packetized case. - */ - waiting_scb = ahd_lookup_scb(ahd, - ahd_inw(ahd, WAITING_TID_HEAD)); - if (waiting_scb != NULL - && (waiting_scb->flags & SCB_PACKETIZED) == 0 - && (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) != 0) - ahd_outb(ahd, SCSISEQ0, - ahd_inb(ahd, SCSISEQ0) | ENSELO); + if ((intstat & INT_PEND) == 0) { + ahd_clear_critical_section(ahd); + intstat = ahd_inb(ahd, INTSTAT); + } } while (--maxloops && (intstat != 0xFF || (ahd->features & AHD_REMOVABLE) == 0) && ((intstat & INT_PEND) != 0 @@ -6956,17 +7032,8 @@ ahd_pause_and_flushwork(struct ahd_softc *ahd) printf("Infinite interrupt loop, INTSTAT = %x", ahd_inb(ahd, INTSTAT)); } - qfreeze_cnt = ahd_inw(ahd, QFREEZE_COUNT); - if (qfreeze_cnt == 0) { - printf("%s: ahd_pause_and_flushwork with 0 qfreeze count!\n", - ahd_name(ahd)); - } else { - qfreeze_cnt--; - } - ahd_outw(ahd, QFREEZE_COUNT, qfreeze_cnt); - if (qfreeze_cnt == 0) - ahd_outb(ahd, SEQ_FLAGS2, - ahd_inb(ahd, SEQ_FLAGS2) & ~SELECTOUT_QFROZEN); + ahd->qfreeze_cnt++; + ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt); ahd_flush_qoutfifo(ahd); @@ -7307,6 +7374,7 @@ ahd_search_qinfifo(struct ahd_softc *ahd, int target, char channel, * appropriate, traverse the SCBs of each "their id" * looking for matches. */ + ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); savedscbptr = ahd_get_scbptr(ahd); tid_next = ahd_inw(ahd, WAITING_TID_HEAD); tid_prev = SCB_LIST_NULL; @@ -7376,7 +7444,7 @@ ahd_search_scb_list(struct ahd_softc *ahd, int target, char channel, u_int prev; int found; - AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK); + AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); found = 0; prev = SCB_LIST_NULL; next = *list_head; @@ -7443,7 +7511,7 @@ static void ahd_stitch_tid_list(struct ahd_softc *ahd, u_int tid_prev, u_int tid_cur, u_int tid_next) { - AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK); + AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); if (SCBID_IS_NULL(tid_cur)) { @@ -7483,7 +7551,7 @@ ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid, { u_int tail_offset; - AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK); + AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); if (!SCBID_IS_NULL(prev)) { ahd_set_scbptr(ahd, prev); ahd_outw(ahd, SCB_NEXT, next); @@ -7887,30 +7955,35 @@ ahd_handle_scb_status(struct ahd_softc *ahd, struct scb *scb) void ahd_handle_scsi_status(struct ahd_softc *ahd, struct scb *scb) { - struct hardware_scb *hscb; - u_int qfreeze_cnt; + struct hardware_scb *hscb; + int paused; /* * The sequencer freezes its select-out queue * anytime a SCSI status error occurs. We must - * handle the error and decrement the QFREEZE count - * to allow the sequencer to continue. + * handle the error and increment our qfreeze count + * to allow the sequencer to continue. We don't + * bother clearing critical sections here since all + * operations are on data structures that the sequencer + * is not touching once the queue is frozen. */ hscb = scb->hscb; + if (ahd_is_paused(ahd)) { + paused = 1; + } else { + paused = 0; + ahd_pause(ahd); + } + /* Freeze the queue until the client sees the error. */ ahd_freeze_devq(ahd, scb); ahd_freeze_scb(scb); - qfreeze_cnt = ahd_inw(ahd, QFREEZE_COUNT); - if (qfreeze_cnt == 0) { - printf("%s: Bad status with 0 qfreeze count!\n", ahd_name(ahd)); - } else { - qfreeze_cnt--; - ahd_outw(ahd, QFREEZE_COUNT, qfreeze_cnt); - } - if (qfreeze_cnt == 0) - ahd_outb(ahd, SEQ_FLAGS2, - ahd_inb(ahd, SEQ_FLAGS2) & ~SELECTOUT_QFROZEN); + ahd->qfreeze_cnt++; + ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt); + + if (paused == 0) + ahd_unpause(ahd); /* Don't want to clobber the original sense code */ if ((scb->flags & SCB_SENSE) != 0) { @@ -8323,13 +8396,14 @@ ahd_loadseq(struct ahd_softc *ahd) u_int sg_prefetch_cnt_limit; u_int sg_prefetch_align; u_int sg_size; + u_int cacheline_mask; uint8_t download_consts[DOWNLOAD_CONST_COUNT]; if (bootverbose) printf("%s: Downloading Sequencer Program...", ahd_name(ahd)); -#if DOWNLOAD_CONST_COUNT != 7 +#if DOWNLOAD_CONST_COUNT != 8 #error "Download Const Mismatch" #endif /* @@ -8365,6 +8439,9 @@ ahd_loadseq(struct ahd_softc *ahd) /* Round down to the nearest power of 2. */ while (powerof2(sg_prefetch_align) == 0) sg_prefetch_align--; + + cacheline_mask = sg_prefetch_align - 1; + /* * If the cacheline boundary is greater than half our prefetch RAM * we risk not being able to fetch even a single complete S/G @@ -8405,6 +8482,7 @@ ahd_loadseq(struct ahd_softc *ahd) download_consts[PKT_OVERRUN_BUFOFFSET] = (ahd->overrun_buf - (uint8_t *)ahd->qoutfifo) / 256; download_consts[SCB_TRANSFER_SIZE] = SCB_TRANSFER_SIZE_1BYTE_LUN; + download_consts[CACHELINE_MASK] = cacheline_mask; cur_patch = patches; downloaded = 0; skip_addr = 0; @@ -8818,6 +8896,15 @@ ahd_dump_card_state(struct ahd_softc *ahd) scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); } printf("\n"); + printf("Sequencer On QFreeze and Complete list: "); + scb_index = ahd_inw(ahd, COMPLETE_ON_QFREEZE_HEAD); + i = 0; + while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { + ahd_set_scbptr(ahd, scb_index); + printf("%d ", scb_index); + scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); + } + printf("\n"); ahd_set_scbptr(ahd, saved_scb_index); dffstat = ahd_inb(ahd, DFFSTAT); for (i = 0; i < 2; i++) { @@ -9052,7 +9139,7 @@ ahd_wait_seeprom(struct ahd_softc *ahd) { int cnt; - cnt = 20; + cnt = 5000; while ((ahd_inb(ahd, SEESTAT) & (SEEARBACK|SEEBUSY)) != 0 && --cnt) ahd_delay(5); |