Merge branch 'devel-stable' into devel

13 files changed, 229 insertions, 82 deletions

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 891e1dd..09ef570 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -302,7 +302,7 @@ static const struct serial8250_config uart_config[] = {
 	},
 };
 
-#if defined (CONFIG_SERIAL_8250_AU1X00)
+#if defined(CONFIG_MIPS_ALCHEMY)
 
 /* Au1x00 UART hardware has a weird register layout */
 static const u8 au_io_in_map[] = {
@@ -422,7 +422,6 @@ static unsigned int mem32_serial_in(struct uart_port *p, int offset)
 	return readl(p->membase + offset);
 }
 
-#ifdef CONFIG_SERIAL_8250_AU1X00
 static unsigned int au_serial_in(struct uart_port *p, int offset)
 {
 	offset = map_8250_in_reg(p, offset) << p->regshift;
@@ -434,7 +433,6 @@ static void au_serial_out(struct uart_port *p, int offset, int value)
 	offset = map_8250_out_reg(p, offset) << p->regshift;
 	__raw_writel(value, p->membase + offset);
 }
-#endif
 
 static unsigned int tsi_serial_in(struct uart_port *p, int offset)
 {
@@ -503,12 +501,11 @@ static void set_io_from_upio(struct uart_port *p)
 		p->serial_out = mem32_serial_out;
 		break;
 
-#ifdef CONFIG_SERIAL_8250_AU1X00
 	case UPIO_AU:
 		p->serial_in = au_serial_in;
 		p->serial_out = au_serial_out;
 		break;
-#endif
+
 	case UPIO_TSI:
 		p->serial_in = tsi_serial_in;
 		p->serial_out = tsi_serial_out;
@@ -535,9 +532,7 @@ serial_out_sync(struct uart_8250_port *up, int offset, int value)
 	switch (p->iotype) {
 	case UPIO_MEM:
 	case UPIO_MEM32:
-#ifdef CONFIG_SERIAL_8250_AU1X00
 	case UPIO_AU:
-#endif
 	case UPIO_DWAPB:
 		p->serial_out(p, offset, value);
 		p->serial_in(p, UART_LCR);	/* safe, no side-effects */
@@ -573,7 +568,7 @@ static inline void _serial_dl_write(struct uart_8250_port *up, int value)
 	serial_outp(up, UART_DLM, value >> 8 & 0xff);
 }
 
-#if defined(CONFIG_SERIAL_8250_AU1X00)
+#if defined(CONFIG_MIPS_ALCHEMY)
 /* Au1x00 haven't got a standard divisor latch */
 static int serial_dl_read(struct uart_8250_port *up)
 {
@@ -2596,11 +2591,9 @@ static void serial8250_config_port(struct uart_port *port, int flags)
 	if (flags & UART_CONFIG_TYPE)
 		autoconfig(up, probeflags);
 
-#ifdef CONFIG_SERIAL_8250_AU1X00
 	/* if access method is AU, it is a 16550 with a quirk */
 	if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
 		up->bugs |= UART_BUG_NOMSR;
-#endif
 
 	if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
 		autoconfig_irq(up);
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 8b23165..8f23eb5 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -258,14 +258,6 @@ config SERIAL_8250_ACORN
 	  system, say Y to this option.  The driver can handle 1, 2, or 3 port
 	  cards.  If unsure, say N.
 
-config SERIAL_8250_AU1X00
-	bool "Au1x00 serial port support"
-	depends on SERIAL_8250 != n && SOC_AU1X00
-	help
-	  If you have an Au1x00 SOC based board and want to use the serial port,
-	  say Y to this option. The driver can handle up to 4 serial ports,
-	  depending on the SOC. If unsure, say N.
-
 config SERIAL_8250_RM9K
 	bool "Support for MIPS RM9xxx integrated serial port"
 	depends on SERIAL_8250 != n && SERIAL_RM9000
@@ -544,8 +536,8 @@ config SERIAL_S3C6400
 
 config SERIAL_S5PV210
 	tristate "Samsung S5PV210 Serial port support"
-	depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442)
-	select SERIAL_SAMSUNG_UARTS_4 if CPU_S5PV210
+	depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442 || CPU_S5PV310)
+	select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_S5PV310)
 	default y
 	help
 	  Serial port support for Samsung's S5P Family of SoC's
diff --git a/drivers/serial/kgdboc.c b/drivers/serial/kgdboc.c
index a9a94ae..39f9a1a 100644
--- a/drivers/serial/kgdboc.c
+++ b/drivers/serial/kgdboc.c
@@ -17,6 +17,7 @@
 #include <linux/kdb.h>
 #include <linux/tty.h>
 #include <linux/console.h>
+#include <linux/vt_kern.h>
 
 #define MAX_CONFIG_LEN		40
 
@@ -31,6 +32,7 @@ static struct kparam_string kps = {
 	.maxlen			= MAX_CONFIG_LEN,
 };
 
+static int kgdboc_use_kms;  /* 1 if we use kernel mode switching */
 static struct tty_driver	*kgdb_tty_driver;
 static int			kgdb_tty_line;
 
@@ -104,6 +106,12 @@ static int configure_kgdboc(void)
 	kgdboc_io_ops.is_console = 0;
 	kgdb_tty_driver = NULL;
 
+	kgdboc_use_kms = 0;
+	if (strncmp(cptr, "kms,", 4) == 0) {
+		cptr += 4;
+		kgdboc_use_kms = 1;
+	}
+
 	if (kgdboc_register_kbd(&cptr))
 		goto do_register;
 
@@ -201,8 +209,14 @@ static int param_set_kgdboc_var(const char *kmessage, struct kernel_param *kp)
 	return configure_kgdboc();
 }
 
+static int dbg_restore_graphics;
+
 static void kgdboc_pre_exp_handler(void)
 {
+	if (!dbg_restore_graphics && kgdboc_use_kms) {
+		dbg_restore_graphics = 1;
+		con_debug_enter(vc_cons[fg_console].d);
+	}
 	/* Increment the module count when the debugger is active */
 	if (!kgdb_connected)
 		try_module_get(THIS_MODULE);
@@ -213,6 +227,10 @@ static void kgdboc_post_exp_handler(void)
 	/* decrement the module count when the debugger detaches */
 	if (!kgdb_connected)
 		module_put(THIS_MODULE);
+	if (kgdboc_use_kms && dbg_restore_graphics) {
+		dbg_restore_graphics = 0;
+		con_debug_leave();
+	}
 }
 
 static struct kgdb_io kgdboc_io_ops = {
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 84a35f6..1a88b36 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -113,7 +113,9 @@ struct psc_ops {
 	unsigned char	(*read_char)(struct uart_port *port);
 	void		(*cw_disable_ints)(struct uart_port *port);
 	void		(*cw_restore_ints)(struct uart_port *port);
-	unsigned long	(*getuartclk)(void *p);
+	unsigned int	(*set_baudrate)(struct uart_port *port,
+					struct ktermios *new,
+					struct ktermios *old);
 	int		(*clock)(struct uart_port *port, int enable);
 	int		(*fifoc_init)(void);
 	void		(*fifoc_uninit)(void);
@@ -121,6 +123,16 @@ struct psc_ops {
 	irqreturn_t	(*handle_irq)(struct uart_port *port);
 };
 
+/* setting the prescaler and divisor reg is common for all chips */
+static inline void mpc52xx_set_divisor(struct mpc52xx_psc __iomem *psc,
+				       u16 prescaler, unsigned int divisor)
+{
+	/* select prescaler */
+	out_be16(&psc->mpc52xx_psc_clock_select, prescaler);
+	out_8(&psc->ctur, divisor >> 8);
+	out_8(&psc->ctlr, divisor & 0xff);
+}
+
 #ifdef CONFIG_PPC_MPC52xx
 #define FIFO_52xx(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1))
 static void mpc52xx_psc_fifo_init(struct uart_port *port)
@@ -128,9 +140,6 @@ static void mpc52xx_psc_fifo_init(struct uart_port *port)
 	struct mpc52xx_psc __iomem *psc = PSC(port);
 	struct mpc52xx_psc_fifo __iomem *fifo = FIFO_52xx(port);
 
-	/* /32 prescaler */
-	out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00);
-
 	out_8(&fifo->rfcntl, 0x00);
 	out_be16(&fifo->rfalarm, 0x1ff);
 	out_8(&fifo->tfcntl, 0x07);
@@ -219,15 +228,47 @@ static void mpc52xx_psc_cw_restore_ints(struct uart_port *port)
 	out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
 }
 
-/* Search for bus-frequency property in this node or a parent */
-static unsigned long mpc52xx_getuartclk(void *p)
+static unsigned int mpc5200_psc_set_baudrate(struct uart_port *port,
+					     struct ktermios *new,
+					     struct ktermios *old)
 {
-	/*
-	 * 5200 UARTs have a / 32 prescaler
-	 * but the generic serial code assumes 16
-	 * so return ipb freq / 2
-	 */
-	return mpc5xxx_get_bus_frequency(p) / 2;
+	unsigned int baud;
+	unsigned int divisor;
+
+	/* The 5200 has a fixed /32 prescaler, uartclk contains the ipb freq */
+	baud = uart_get_baud_rate(port, new, old,
+				  port->uartclk / (32 * 0xffff) + 1,
+				  port->uartclk / 32);
+	divisor = (port->uartclk + 16 * baud) / (32 * baud);
+
+	/* enable the /32 prescaler and set the divisor */
+	mpc52xx_set_divisor(PSC(port), 0xdd00, divisor);
+	return baud;
+}
+
+static unsigned int mpc5200b_psc_set_baudrate(struct uart_port *port,
+					      struct ktermios *new,
+					      struct ktermios *old)
+{
+	unsigned int baud;
+	unsigned int divisor;
+	u16 prescaler;
+
+	/* The 5200B has a selectable /4 or /32 prescaler, uartclk contains the
+	 * ipb freq */
+	baud = uart_get_baud_rate(port, new, old,
+				  port->uartclk / (32 * 0xffff) + 1,
+				  port->uartclk / 4);
+	divisor = (port->uartclk + 2 * baud) / (4 * baud);
+
+	/* select the proper prescaler and set the divisor */
+	if (divisor > 0xffff) {
+		divisor = (divisor + 4) / 8;
+		prescaler = 0xdd00; /* /32 */
+	} else
+		prescaler = 0xff00; /* /4 */
+	mpc52xx_set_divisor(PSC(port), prescaler, divisor);
+	return baud;
 }
 
 static void mpc52xx_psc_get_irq(struct uart_port *port, struct device_node *np)
@@ -258,7 +299,28 @@ static struct psc_ops mpc52xx_psc_ops = {
 	.read_char = mpc52xx_psc_read_char,
 	.cw_disable_ints = mpc52xx_psc_cw_disable_ints,
 	.cw_restore_ints = mpc52xx_psc_cw_restore_ints,
-	.getuartclk = mpc52xx_getuartclk,
+	.set_baudrate = mpc5200_psc_set_baudrate,
+	.get_irq = mpc52xx_psc_get_irq,
+	.handle_irq = mpc52xx_psc_handle_irq,
+};
+
+static struct psc_ops mpc5200b_psc_ops = {
+	.fifo_init = mpc52xx_psc_fifo_init,
+	.raw_rx_rdy = mpc52xx_psc_raw_rx_rdy,
+	.raw_tx_rdy = mpc52xx_psc_raw_tx_rdy,
+	.rx_rdy = mpc52xx_psc_rx_rdy,
+	.tx_rdy = mpc52xx_psc_tx_rdy,
+	.tx_empty = mpc52xx_psc_tx_empty,
+	.stop_rx = mpc52xx_psc_stop_rx,
+	.start_tx = mpc52xx_psc_start_tx,
+	.stop_tx = mpc52xx_psc_stop_tx,
+	.rx_clr_irq = mpc52xx_psc_rx_clr_irq,
+	.tx_clr_irq = mpc52xx_psc_tx_clr_irq,
+	.write_char = mpc52xx_psc_write_char,
+	.read_char = mpc52xx_psc_read_char,
+	.cw_disable_ints = mpc52xx_psc_cw_disable_ints,
+	.cw_restore_ints = mpc52xx_psc_cw_restore_ints,
+	.set_baudrate = mpc5200b_psc_set_baudrate,
 	.get_irq = mpc52xx_psc_get_irq,
 	.handle_irq = mpc52xx_psc_handle_irq,
 };
@@ -392,9 +454,35 @@ static void mpc512x_psc_cw_restore_ints(struct uart_port *port)
 	out_be32(&FIFO_512x(port)->rximr, port->read_status_mask & 0x7f);
 }
 
-static unsigned long mpc512x_getuartclk(void *p)
+static unsigned int mpc512x_psc_set_baudrate(struct uart_port *port,
+					     struct ktermios *new,
+					     struct ktermios *old)
 {
-	return mpc5xxx_get_bus_frequency(p);
+	unsigned int baud;
+	unsigned int divisor;
+
+	/*
+	 * The "MPC5121e Microcontroller Reference Manual, Rev. 3" says on
+	 * pg. 30-10 that the chip supports a /32 and a /10 prescaler.
+	 * Furthermore, it states that "After reset, the prescaler by 10
+	 * for the UART mode is selected", but the reset register value is
+	 * 0x0000 which means a /32 prescaler. This is wrong.
+	 *
+	 * In reality using /32 prescaler doesn't work, as it is not supported!
+	 * Use /16 or /10 prescaler, see "MPC5121e Hardware Design Guide",
+	 * Chapter 4.1 PSC in UART Mode.
+	 * Calculate with a /16 prescaler here.
+	 */
+
+	/* uartclk contains the ips freq */
+	baud = uart_get_baud_rate(port, new, old,
+				  port->uartclk / (16 * 0xffff) + 1,
+				  port->uartclk / 16);
+	divisor = (port->uartclk + 8 * baud) / (16 * baud);
+
+	/* enable the /16 prescaler and set the divisor */
+	mpc52xx_set_divisor(PSC(port), 0xdd00, divisor);
+	return baud;
 }
 
 /* Init PSC FIFO Controller */
@@ -498,7 +586,7 @@ static struct psc_ops mpc512x_psc_ops = {
 	.read_char = mpc512x_psc_read_char,
 	.cw_disable_ints = mpc512x_psc_cw_disable_ints,
 	.cw_restore_ints = mpc512x_psc_cw_restore_ints,
-	.getuartclk = mpc512x_getuartclk,
+	.set_baudrate = mpc512x_psc_set_baudrate,
 	.clock = mpc512x_psc_clock,
 	.fifoc_init = mpc512x_psc_fifoc_init,
 	.fifoc_uninit = mpc512x_psc_fifoc_uninit,
@@ -666,8 +754,8 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
 	struct mpc52xx_psc __iomem *psc = PSC(port);
 	unsigned long flags;
 	unsigned char mr1, mr2;
-	unsigned short ctr;
-	unsigned int j, baud, quot;
+	unsigned int j;
+	unsigned int baud;
 
 	/* Prepare what we're gonna write */
 	mr1 = 0;
@@ -704,16 +792,9 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
 		mr2 |= MPC52xx_PSC_MODE_TXCTS;
 	}
 
-	baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
-	quot = uart_get_divisor(port, baud);
-	ctr = quot & 0xffff;
-
 	/* Get the lock */
 	spin_lock_irqsave(&port->lock, flags);
 
-	/* Update the per-port timeout */
-	uart_update_timeout(port, new->c_cflag, baud);
-
 	/* Do our best to flush TX & RX, so we don't lose anything */
 	/* But we don't wait indefinitely ! */
 	j = 5000000;	/* Maximum wait */
@@ -737,8 +818,10 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
 	out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
 	out_8(&psc->mode, mr1);
 	out_8(&psc->mode, mr2);
-	out_8(&psc->ctur, ctr >> 8);
-	out_8(&psc->ctlr, ctr & 0xff);
+	baud = psc_ops->set_baudrate(port, new, old);
+
+	/* Update the per-port timeout */
+	uart_update_timeout(port, new->c_cflag, baud);
 
 	if (UART_ENABLE_MS(port, new->c_cflag))
 		mpc52xx_uart_enable_ms(port);
@@ -1118,7 +1201,7 @@ mpc52xx_console_setup(struct console *co, char *options)
 		return ret;
 	}
 
-	uartclk = psc_ops->getuartclk(np);
+	uartclk = mpc5xxx_get_bus_frequency(np);
 	if (uartclk == 0) {
 		pr_debug("Could not find uart clock frequency!\n");
 		return -EINVAL;
@@ -1201,6 +1284,7 @@ static struct uart_driver mpc52xx_uart_driver = {
 
 static struct of_device_id mpc52xx_uart_of_match[] = {
 #ifdef CONFIG_PPC_MPC52xx
+	{ .compatible = "fsl,mpc5200b-psc-uart", .data = &mpc5200b_psc_ops, },
 	{ .compatible = "fsl,mpc5200-psc-uart", .data = &mpc52xx_psc_ops, },
 	/* binding used by old lite5200 device trees: */
 	{ .compatible = "mpc5200-psc-uart", .data = &mpc52xx_psc_ops, },
@@ -1233,7 +1317,10 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
 	pr_debug("Found %s assigned to ttyPSC%x\n",
 		 mpc52xx_uart_nodes[idx]->full_name, idx);
 
-	uartclk = psc_ops->getuartclk(op->dev.of_node);
+	/* set the uart clock to the input clock of the psc, the different
+	 * prescalers are taken into account in the set_baudrate() methods
+	 * of the respective chip */
+	uartclk = mpc5xxx_get_bus_frequency(op->dev.of_node);
 	if (uartclk == 0) {
 		dev_dbg(&op->dev, "Could not find uart clock frequency!\n");
 		return -EINVAL;
diff --git a/drivers/serial/s5pv210.c b/drivers/serial/s5pv210.c
index 4a789e5..6ebccd7 100644
--- a/drivers/serial/s5pv210.c
+++ b/drivers/serial/s5pv210.c
@@ -28,8 +28,12 @@
 static int s5pv210_serial_setsource(struct uart_port *port,
 					struct s3c24xx_uart_clksrc *clk)
 {
+	struct s3c2410_uartcfg *cfg = port->dev->platform_data;
 	unsigned long ucon = rd_regl(port, S3C2410_UCON);
 
+	if ((cfg->clocks_size) == 1)
+		return 0;
+
 	if (strcmp(clk->name, "pclk") == 0)
 		ucon &= ~S5PV210_UCON_CLKMASK;
 	else if (strcmp(clk->name, "uclk1") == 0)
@@ -47,10 +51,14 @@ static int s5pv210_serial_setsource(struct uart_port *port,
 static int s5pv210_serial_getsource(struct uart_port *port,
 					struct s3c24xx_uart_clksrc *clk)
 {
+	struct s3c2410_uartcfg *cfg = port->dev->platform_data;
 	u32 ucon = rd_regl(port, S3C2410_UCON);
 
 	clk->divisor = 1;
 
+	if ((cfg->clocks_size) == 1)
+		return 0;
+
 	switch (ucon & S5PV210_UCON_CLKMASK) {
 	case S5PV210_UCON_PCLK:
 		clk->name = "pclk";
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index a9d6c56..b1156ba 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -705,8 +705,13 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 	if (ourport->info->has_divslot) {
 		unsigned int div = ourport->baudclk_rate / baud;
 
-		udivslot = udivslot_table[div & 15];
-		dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
+		if (cfg->has_fracval) {
+			udivslot = (div & 15);
+			dbg("fracval = %04x\n", udivslot);
+		} else {
+			udivslot = udivslot_table[div & 15];
+			dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
+		}
 	}
 
 	switch (termios->c_cflag & CSIZE) {
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 5f90fcd..c291b3a 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -346,6 +346,27 @@ static int scif_rxfill(struct uart_port *port)
 		return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
 	}
 }
+#elif defined(CONFIG_ARCH_SH7372)
+static int scif_txfill(struct uart_port *port)
+{
+	if (port->type == PORT_SCIFA)
+		return sci_in(port, SCFDR) >> 8;
+	else
+		return sci_in(port, SCTFDR);
+}
+
+static int scif_txroom(struct uart_port *port)
+{
+	return port->fifosize - scif_txfill(port);
+}
+
+static int scif_rxfill(struct uart_port *port)
+{
+	if (port->type == PORT_SCIFA)
+		return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
+	else
+		return sci_in(port, SCRFDR);
+}
 #else
 static int scif_txfill(struct uart_port *port)
 {
@@ -683,7 +704,7 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
 		u16 ssr = sci_in(port, SCxSR);
 
 		/* Disable future Rx interrupts */
-		if (port->type == PORT_SCIFA) {
+		if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
 			disable_irq_nosync(irq);
 			scr |= 0x4000;
 		} else {
@@ -928,7 +949,7 @@ static void sci_dma_tx_complete(void *arg)
 
 	if (!uart_circ_empty(xmit)) {
 		schedule_work(&s->work_tx);
-	} else if (port->type == PORT_SCIFA) {
+	} else if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
 		u16 ctrl = sci_in(port, SCSCR);
 		sci_out(port, SCSCR, ctrl & ~SCI_CTRL_FLAGS_TIE);
 	}
@@ -1184,7 +1205,7 @@ static void sci_start_tx(struct uart_port *port)
 	unsigned short ctrl;
 
 #ifdef CONFIG_SERIAL_SH_SCI_DMA
-	if (port->type == PORT_SCIFA) {
+	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
 		u16 new, scr = sci_in(port, SCSCR);
 		if (s->chan_tx)
 			new = scr | 0x8000;
@@ -1197,7 +1218,7 @@ static void sci_start_tx(struct uart_port *port)
 	    s->cookie_tx < 0)
 		schedule_work(&s->work_tx);
 #endif
-	if (!s->chan_tx || port->type == PORT_SCIFA) {
+	if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
 		/* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
 		ctrl = sci_in(port, SCSCR);
 		sci_out(port, SCSCR, ctrl | SCI_CTRL_FLAGS_TIE);
@@ -1210,7 +1231,7 @@ static void sci_stop_tx(struct uart_port *port)
 
 	/* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
 	ctrl = sci_in(port, SCSCR);
-	if (port->type == PORT_SCIFA)
+	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
 		ctrl &= ~0x8000;
 	ctrl &= ~SCI_CTRL_FLAGS_TIE;
 	sci_out(port, SCSCR, ctrl);
@@ -1222,7 +1243,7 @@ static void sci_start_rx(struct uart_port *port)
 
 	/* Set RIE (Receive Interrupt Enable) bit in SCSCR */
 	ctrl |= sci_in(port, SCSCR);
-	if (port->type == PORT_SCIFA)
+	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
 		ctrl &= ~0x4000;
 	sci_out(port, SCSCR, ctrl);
 }
@@ -1233,7 +1254,7 @@ static void sci_stop_rx(struct uart_port *port)
 
 	/* Clear RIE (Receive Interrupt Enable) bit in SCSCR */
 	ctrl = sci_in(port, SCSCR);
-	if (port->type == PORT_SCIFA)
+	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
 		ctrl &= ~0x4000;
 	ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE);
 	sci_out(port, SCSCR, ctrl);
@@ -1271,7 +1292,7 @@ static void rx_timer_fn(unsigned long arg)
 	struct uart_port *port = &s->port;
 	u16 scr = sci_in(port, SCSCR);
 
-	if (port->type == PORT_SCIFA) {
+	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
 		scr &= ~0x4000;
 		enable_irq(s->irqs[1]);
 	}
@@ -1524,6 +1545,8 @@ static const char *sci_type(struct uart_port *port)
 		return "scif";
 	case PORT_SCIFA:
 		return "scifa";
+	case PORT_SCIFB:
+		return "scifb";
 	}
 
 	return NULL;
@@ -1612,6 +1635,9 @@ static int __devinit sci_init_single(struct platform_device *dev,
 	port->line	= index;
 
 	switch (p->type) {
+	case PORT_SCIFB:
+		port->fifosize = 256;
+		break;
 	case PORT_SCIFA:
 		port->fifosize = 64;
 		break;
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index f70c49f..9b52f77 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -322,7 +322,7 @@
 #define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\
   static inline unsigned int sci_##name##_in(struct uart_port *port)	\
   {									\
-    if (port->type == PORT_SCIF) {					\
+    if (port->type == PORT_SCIF || port->type == PORT_SCIFB) {		\
       SCI_IN(scif_size, scif_offset)					\
     } else {	/* PORT_SCI or PORT_SCIFA */				\
       SCI_IN(sci_size, sci_offset);					\
@@ -330,7 +330,7 @@
   }									\
   static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
   {									\
-    if (port->type == PORT_SCIF) {					\
+    if (port->type == PORT_SCIF || port->type == PORT_SCIFB) {		\
       SCI_OUT(scif_size, scif_offset, value)				\
     } else {	/* PORT_SCI or PORT_SCIFA */				\
       SCI_OUT(sci_size, sci_offset, value);				\
@@ -384,8 +384,12 @@
       defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721) || \
       defined(CONFIG_ARCH_SH7367) || \
-      defined(CONFIG_ARCH_SH7377) || \
-      defined(CONFIG_ARCH_SH7372)
+      defined(CONFIG_ARCH_SH7377)
+#define SCIF_FNS(name, scif_offset, scif_size) \
+  CPU_SCIF_FNS(name, scif_offset, scif_size)
+#elif defined(CONFIG_ARCH_SH7372)
+#define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size) \
+  CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size)
 #define SCIF_FNS(name, scif_offset, scif_size) \
   CPU_SCIF_FNS(name, scif_offset, scif_size)
 #else
@@ -422,8 +426,7 @@
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721) || \
     defined(CONFIG_ARCH_SH7367) || \
-    defined(CONFIG_ARCH_SH7377) || \
-    defined(CONFIG_ARCH_SH7372)
+    defined(CONFIG_ARCH_SH7377)
 
 SCIF_FNS(SCSMR,  0x00, 16)
 SCIF_FNS(SCBRR,  0x04,  8)
@@ -436,6 +439,20 @@ SCIF_FNS(SCFDR,  0x1c, 16)
 SCIF_FNS(SCxTDR, 0x20,  8)
 SCIF_FNS(SCxRDR, 0x24,  8)
 SCIF_FNS(SCLSR,  0x00,  0)
+#elif defined(CONFIG_ARCH_SH7372)
+SCIF_FNS(SCSMR,  0x00, 16)
+SCIF_FNS(SCBRR,  0x04,  8)
+SCIF_FNS(SCSCR,  0x08, 16)
+SCIF_FNS(SCTDSR, 0x0c, 16)
+SCIF_FNS(SCFER,  0x10, 16)
+SCIF_FNS(SCxSR,  0x14, 16)
+SCIF_FNS(SCFCR,  0x18, 16)
+SCIF_FNS(SCFDR,  0x1c, 16)
+SCIF_FNS(SCTFDR, 0x38, 16)
+SCIF_FNS(SCRFDR, 0x3c, 16)
+SCIx_FNS(SCxTDR, 0x20,  8, 0x40,  8)
+SCIx_FNS(SCxRDR, 0x24,  8, 0x60,  8)
+SCIF_FNS(SCLSR,  0x00,  0)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
       defined(CONFIG_CPU_SUBTYPE_SH7724)
 SCIx_FNS(SCSMR,  0x00, 16, 0x00, 16)
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index 890f917..a779e22 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -525,7 +525,7 @@ static int __devinit hv_probe(struct of_device *op, const struct of_device_id *m
 	unsigned long minor;
 	int err;
 
-	if (op->irqs[0] == 0xffffffff)
+	if (op->archdata.irqs[0] == 0xffffffff)
 		return -ENODEV;
 
 	port = kzalloc(sizeof(struct uart_port), GFP_KERNEL);
@@ -557,7 +557,7 @@ static int __devinit hv_probe(struct of_device *op, const struct of_device_id *m
 
 	port->membase = (unsigned char __iomem *) __pa(port);
 
-	port->irq = op->irqs[0];
+	port->irq = op->archdata.irqs[0];
 
 	port->dev = &op->dev;
 
@@ -644,12 +644,12 @@ static int __init sunhv_init(void)
 	if (tlb_type != hypervisor)
 		return -ENODEV;
 
-	return of_register_driver(&hv_driver, &of_bus_type);
+	return of_register_platform_driver(&hv_driver);
 }
 
 static void __exit sunhv_exit(void)
 {
-	of_unregister_driver(&hv_driver);
+	of_unregister_platform_driver(&hv_driver);
 }
 
 module_init(sunhv_init);
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 5e81bc6..9845fb1 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -969,7 +969,7 @@ static int __devinit sunsab_init_one(struct uart_sunsab_port *up,
 		return -ENOMEM;
 	up->regs = (union sab82532_async_regs __iomem *) up->port.membase;
 
-	up->port.irq = op->irqs[0];
+	up->port.irq = op->archdata.irqs[0];
 
 	up->port.fifosize = SAB82532_XMIT_FIFO_SIZE;
 	up->port.iotype = UPIO_MEM;
@@ -1130,12 +1130,12 @@ static int __init sunsab_init(void)
 		}
 	}
 
-	return of_register_driver(&sab_driver, &of_bus_type);
+	return of_register_platform_driver(&sab_driver);
 }
 
 static void __exit sunsab_exit(void)
 {
-	of_unregister_driver(&sab_driver);
+	of_unregister_platform_driver(&sab_driver);
 	if (sunsab_reg.nr) {
 		sunserial_unregister_minors(&sunsab_reg, sunsab_reg.nr);
 	}
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index ffbf455..3cdf748 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1443,7 +1443,7 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m
 		return -ENOMEM;
 	}
 
-	up->port.irq = op->irqs[0];
+	up->port.irq = op->archdata.irqs[0];
 
 	up->port.dev = &op->dev;
 
@@ -1586,7 +1586,7 @@ static int __init sunsu_init(void)
 			return err;
 	}
 
-	err = of_register_driver(&su_driver, &of_bus_type);
+	err = of_register_platform_driver(&su_driver);
 	if (err && num_uart)
 		sunserial_unregister_minors(&sunsu_reg, num_uart);
 
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index f9a24f4..d1e6bcb 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1426,7 +1426,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
 	rp = sunzilog_chip_regs[inst];
 
 	if (zilog_irq == -1)
-		zilog_irq = op->irqs[0];
+		zilog_irq = op->archdata.irqs[0];
 
 	up = &sunzilog_port_table[inst * 2];
 
@@ -1434,7 +1434,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
 	up[0].port.mapbase = op->resource[0].start + 0x00;
 	up[0].port.membase = (void __iomem *) &rp->channelA;
 	up[0].port.iotype = UPIO_MEM;
-	up[0].port.irq = op->irqs[0];
+	up[0].port.irq = op->archdata.irqs[0];
 	up[0].port.uartclk = ZS_CLOCK;
 	up[0].port.fifosize = 1;
 	up[0].port.ops = &sunzilog_pops;
@@ -1451,7 +1451,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
 	up[1].port.mapbase = op->resource[0].start + 0x04;
 	up[1].port.membase = (void __iomem *) &rp->channelB;
 	up[1].port.iotype = UPIO_MEM;
-	up[1].port.irq = op->irqs[0];
+	up[1].port.irq = op->archdata.irqs[0];
 	up[1].port.uartclk = ZS_CLOCK;
 	up[1].port.fifosize = 1;
 	up[1].port.ops = &sunzilog_pops;
@@ -1492,12 +1492,12 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
 		       "is a %s\n",
 		       dev_name(&op->dev),
 		       (unsigned long long) up[0].port.mapbase,
-		       op->irqs[0], sunzilog_type(&up[0].port));
+		       op->archdata.irqs[0], sunzilog_type(&up[0].port));
 		printk(KERN_INFO "%s: Mouse at MMIO 0x%llx (irq = %d) "
 		       "is a %s\n",
 		       dev_name(&op->dev),
 		       (unsigned long long) up[1].port.mapbase,
-		       op->irqs[0], sunzilog_type(&up[1].port));
+		       op->archdata.irqs[0], sunzilog_type(&up[1].port));
 		kbm_inst++;
 	}
 
@@ -1576,7 +1576,7 @@ static int __init sunzilog_init(void)
 			goto out_free_tables;
 	}
 
-	err = of_register_driver(&zs_driver, &of_bus_type);
+	err = of_register_platform_driver(&zs_driver);
 	if (err)
 		goto out_unregister_uart;
 
@@ -1604,7 +1604,7 @@ out:
 	return err;
 
 out_unregister_driver:
-	of_unregister_driver(&zs_driver);
+	of_unregister_platform_driver(&zs_driver);
 
 out_unregister_uart:
 	if (num_sunzilog) {
@@ -1619,7 +1619,7 @@ out_free_tables:
 
 static void __exit sunzilog_exit(void)
 {
-	of_unregister_driver(&zs_driver);
+	of_unregister_platform_driver(&zs_driver);
 
 	if (zilog_irq != -1) {
 		struct uart_sunzilog_port *up = sunzilog_irq_chain;
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 8acccd5..caf085d 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -21,6 +21,7 @@
 #include <asm/io.h>
 #if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE))
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>