aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/sn
diff options
context:
space:
mode:
authorBrent Casavant <bcasavan@sgi.com>2006-10-17 00:09:25 -0700
committerLinus Torvalds <torvalds@g5.osdl.org>2006-10-17 08:18:42 -0700
commit59f148005cfd3d41537a4b872c266213d5fe4dc6 (patch)
tree1e769ca80218a39417f7d45759e1bd2a4dbf6452 /drivers/sn
parent107d5a72f2c6a6819b66eebcb0281c7a67b6baaa (diff)
downloadkernel_samsung_smdk4412-59f148005cfd3d41537a4b872c266213d5fe4dc6.zip
kernel_samsung_smdk4412-59f148005cfd3d41537a4b872c266213d5fe4dc6.tar.gz
kernel_samsung_smdk4412-59f148005cfd3d41537a4b872c266213d5fe4dc6.tar.bz2
[PATCH] ioc4: Enable build on non-SN2
The SGI PCI-RT card, based on the SGI IOC4 chip, will be made available on Altix XE (x86_64) platforms in the near future. As such it is now a misnomer for the IOC4 base device driver to live under drivers/sn, and would complicate builds for non-SN2. This patch moves the IOC4 base driver code from drivers/sn to drivers/misc, and updates the associated Makefiles and Kconfig files to allow building on non-SN2 configs. Due to the resulting change in link order, it is now necessary to use late_initcall() for IOC4 subdriver initialization. [akpm@osdl.org: __udivdi3 fix] [akpm@osdl.org: fix default in Kconfig] Acked-by: Pat Gefre <pfg@sgi.com> Acked-by: Jeremy Higdon <jeremy@sgi.com> Signed-off-by: Brent Casavant <bcasavan@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/sn')
-rw-r--r--drivers/sn/Kconfig12
-rw-r--r--drivers/sn/Makefile1
-rw-r--r--drivers/sn/ioc4.c474
3 files changed, 0 insertions, 487 deletions
diff --git a/drivers/sn/Kconfig b/drivers/sn/Kconfig
index 34d4fde..c66ba9a 100644
--- a/drivers/sn/Kconfig
+++ b/drivers/sn/Kconfig
@@ -5,18 +5,6 @@
menu "SN Devices"
depends on SGI_SN
-config SGI_IOC4
- tristate "SGI IOC4 Base IO support"
- default m
- ---help---
- This option enables basic support for the IOC4 chip on certain
- SGI IO controller cards (IO9, IO10, and PCI-RT). This option
- does not enable any specific functions on such a card, but provides
- necessary infrastructure for other drivers to utilize.
-
- If you have an SGI Altix with an IOC4-based card say Y.
- Otherwise say N.
-
config SGI_IOC3
tristate "SGI IOC3 Base IO support"
default m
diff --git a/drivers/sn/Makefile b/drivers/sn/Makefile
index 2cda011..693db8b 100644
--- a/drivers/sn/Makefile
+++ b/drivers/sn/Makefile
@@ -3,5 +3,4 @@
#
#
-obj-$(CONFIG_SGI_IOC4) += ioc4.o
obj-$(CONFIG_SGI_IOC3) += ioc3.o
diff --git a/drivers/sn/ioc4.c b/drivers/sn/ioc4.c
deleted file mode 100644
index 83d2e90..0000000
--- a/drivers/sn/ioc4.c
+++ /dev/null
@@ -1,474 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005-2006 Silicon Graphics, Inc. All Rights Reserved.
- */
-
-/* This file contains the master driver module for use by SGI IOC4 subdrivers.
- *
- * It allocates any resources shared between multiple subdevices, and
- * provides accessor functions (where needed) and the like for those
- * resources. It also provides a mechanism for the subdevice modules
- * to support loading and unloading.
- *
- * Non-shared resources (e.g. external interrupt A_INT_OUT register page
- * alias, serial port and UART registers) are handled by the subdevice
- * modules themselves.
- *
- * This is all necessary because IOC4 is not implemented as a multi-function
- * PCI device, but an amalgamation of disparate registers for several
- * types of device (ATA, serial, external interrupts). The normal
- * resource management in the kernel doesn't have quite the right interfaces
- * to handle this situation (e.g. multiple modules can't claim the same
- * PCI ID), thus this IOC4 master module.
- */
-
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/ioc4.h>
-#include <linux/ktime.h>
-#include <linux/mutex.h>
-#include <linux/time.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/clksupport.h>
-#include <asm/sn/shub_mmr.h>
-
-/***************
- * Definitions *
- ***************/
-
-/* Tweakable values */
-
-/* PCI bus speed detection/calibration */
-#define IOC4_CALIBRATE_COUNT 63 /* Calibration cycle period */
-#define IOC4_CALIBRATE_CYCLES 256 /* Average over this many cycles */
-#define IOC4_CALIBRATE_DISCARD 2 /* Discard first few cycles */
-#define IOC4_CALIBRATE_LOW_MHZ 25 /* Lower bound on bus speed sanity */
-#define IOC4_CALIBRATE_HIGH_MHZ 75 /* Upper bound on bus speed sanity */
-#define IOC4_CALIBRATE_DEFAULT_MHZ 66 /* Assumed if sanity check fails */
-
-/************************
- * Submodule management *
- ************************/
-
-static DEFINE_MUTEX(ioc4_mutex);
-
-static LIST_HEAD(ioc4_devices);
-static LIST_HEAD(ioc4_submodules);
-
-/* Register an IOC4 submodule */
-int
-ioc4_register_submodule(struct ioc4_submodule *is)
-{
- struct ioc4_driver_data *idd;
-
- mutex_lock(&ioc4_mutex);
- list_add(&is->is_list, &ioc4_submodules);
-
- /* Initialize submodule for each IOC4 */
- if (!is->is_probe)
- goto out;
-
- list_for_each_entry(idd, &ioc4_devices, idd_list) {
- if (is->is_probe(idd)) {
- printk(KERN_WARNING
- "%s: IOC4 submodule %s probe failed "
- "for pci_dev %s",
- __FUNCTION__, module_name(is->is_owner),
- pci_name(idd->idd_pdev));
- }
- }
- out:
- mutex_unlock(&ioc4_mutex);
- return 0;
-}
-
-/* Unregister an IOC4 submodule */
-void
-ioc4_unregister_submodule(struct ioc4_submodule *is)
-{
- struct ioc4_driver_data *idd;
-
- mutex_lock(&ioc4_mutex);
- list_del(&is->is_list);
-
- /* Remove submodule for each IOC4 */
- if (!is->is_remove)
- goto out;
-
- list_for_each_entry(idd, &ioc4_devices, idd_list) {
- if (is->is_remove(idd)) {
- printk(KERN_WARNING
- "%s: IOC4 submodule %s remove failed "
- "for pci_dev %s.\n",
- __FUNCTION__, module_name(is->is_owner),
- pci_name(idd->idd_pdev));
- }
- }
- out:
- mutex_unlock(&ioc4_mutex);
-}
-
-/*********************
- * Device management *
- *********************/
-
-#define IOC4_CALIBRATE_LOW_LIMIT \
- (1000*IOC4_EXTINT_COUNT_DIVISOR/IOC4_CALIBRATE_LOW_MHZ)
-#define IOC4_CALIBRATE_HIGH_LIMIT \
- (1000*IOC4_EXTINT_COUNT_DIVISOR/IOC4_CALIBRATE_HIGH_MHZ)
-#define IOC4_CALIBRATE_DEFAULT \
- (1000*IOC4_EXTINT_COUNT_DIVISOR/IOC4_CALIBRATE_DEFAULT_MHZ)
-
-#define IOC4_CALIBRATE_END \
- (IOC4_CALIBRATE_CYCLES + IOC4_CALIBRATE_DISCARD)
-
-#define IOC4_INT_OUT_MODE_TOGGLE 0x7 /* Toggle INT_OUT every COUNT+1 ticks */
-
-/* Determines external interrupt output clock period of the PCI bus an
- * IOC4 is attached to. This value can be used to determine the PCI
- * bus speed.
- *
- * IOC4 has a design feature that various internal timers are derived from
- * the PCI bus clock. This causes IOC4 device drivers to need to take the
- * bus speed into account when setting various register values (e.g. INT_OUT
- * register COUNT field, UART divisors, etc). Since this information is
- * needed by several subdrivers, it is determined by the main IOC4 driver,
- * even though the following code utilizes external interrupt registers
- * to perform the speed calculation.
- */
-static void
-ioc4_clock_calibrate(struct ioc4_driver_data *idd)
-{
- union ioc4_int_out int_out;
- union ioc4_gpcr gpcr;
- unsigned int state, last_state = 1;
- struct timespec start_ts, end_ts;
- uint64_t start, end, period;
- unsigned int count = 0;
-
- /* Enable output */
- gpcr.raw = 0;
- gpcr.fields.dir = IOC4_GPCR_DIR_0;
- gpcr.fields.int_out_en = 1;
- writel(gpcr.raw, &idd->idd_misc_regs->gpcr_s.raw);
-
- /* Reset to power-on state */
- writel(0, &idd->idd_misc_regs->int_out.raw);
- mmiowb();
-
- /* Set up square wave */
- int_out.raw = 0;
- int_out.fields.count = IOC4_CALIBRATE_COUNT;
- int_out.fields.mode = IOC4_INT_OUT_MODE_TOGGLE;
- int_out.fields.diag = 0;
- writel(int_out.raw, &idd->idd_misc_regs->int_out.raw);
- mmiowb();
-
- /* Check square wave period averaged over some number of cycles */
- do {
- int_out.raw = readl(&idd->idd_misc_regs->int_out.raw);
- state = int_out.fields.int_out;
- if (!last_state && state) {
- count++;
- if (count == IOC4_CALIBRATE_END) {
- ktime_get_ts(&end_ts);
- break;
- } else if (count == IOC4_CALIBRATE_DISCARD)
- ktime_get_ts(&start_ts);
- }
- last_state = state;
- } while (1);
-
- /* Calculation rearranged to preserve intermediate precision.
- * Logically:
- * 1. "end - start" gives us the measurement period over all
- * the square wave cycles.
- * 2. Divide by number of square wave cycles to get the period
- * of a square wave cycle.
- * 3. Divide by 2*(int_out.fields.count+1), which is the formula
- * by which the IOC4 generates the square wave, to get the
- * period of an IOC4 INT_OUT count.
- */
- end = end_ts.tv_sec * NSEC_PER_SEC + end_ts.tv_nsec;
- start = start_ts.tv_sec * NSEC_PER_SEC + start_ts.tv_nsec;
- period = (end - start) /
- (IOC4_CALIBRATE_CYCLES * 2 * (IOC4_CALIBRATE_COUNT + 1));
-
- /* Bounds check the result. */
- if (period > IOC4_CALIBRATE_LOW_LIMIT ||
- period < IOC4_CALIBRATE_HIGH_LIMIT) {
- printk(KERN_INFO
- "IOC4 %s: Clock calibration failed. Assuming"
- "PCI clock is %d ns.\n",
- pci_name(idd->idd_pdev),
- IOC4_CALIBRATE_DEFAULT / IOC4_EXTINT_COUNT_DIVISOR);
- period = IOC4_CALIBRATE_DEFAULT;
- } else {
- printk(KERN_DEBUG
- "IOC4 %s: PCI clock is %ld ns.\n",
- pci_name(idd->idd_pdev),
- period / IOC4_EXTINT_COUNT_DIVISOR);
- }
-
- /* Remember results. We store the extint clock period rather
- * than the PCI clock period so that greater precision is
- * retained. Divide by IOC4_EXTINT_COUNT_DIVISOR to get
- * PCI clock period.
- */
- idd->count_period = period;
-}
-
-/* There are three variants of IOC4 cards: IO9, IO10, and PCI-RT.
- * Each brings out different combinations of IOC4 signals, thus.
- * the IOC4 subdrivers need to know to which we're attached.
- *
- * We look for the presence of a SCSI (IO9) or SATA (IO10) controller
- * on the same PCI bus at slot number 3 to differentiate IO9 from IO10.
- * If neither is present, it's a PCI-RT.
- */
-static unsigned int
-ioc4_variant(struct ioc4_driver_data *idd)
-{
- struct pci_dev *pdev = NULL;
- int found = 0;
-
- /* IO9: Look for a QLogic ISP 12160 at the same bus and slot 3. */
- do {
- pdev = pci_get_device(PCI_VENDOR_ID_QLOGIC,
- PCI_DEVICE_ID_QLOGIC_ISP12160, pdev);
- if (pdev &&
- idd->idd_pdev->bus->number == pdev->bus->number &&
- 3 == PCI_SLOT(pdev->devfn))
- found = 1;
- pci_dev_put(pdev);
- } while (pdev && !found);
- if (NULL != pdev)
- return IOC4_VARIANT_IO9;
-
- /* IO10: Look for a Vitesse VSC 7174 at the same bus and slot 3. */
- pdev = NULL;
- do {
- pdev = pci_get_device(PCI_VENDOR_ID_VITESSE,
- PCI_DEVICE_ID_VITESSE_VSC7174, pdev);
- if (pdev &&
- idd->idd_pdev->bus->number == pdev->bus->number &&
- 3 == PCI_SLOT(pdev->devfn))
- found = 1;
- pci_dev_put(pdev);
- } while (pdev && !found);
- if (NULL != pdev)
- return IOC4_VARIANT_IO10;
-
- /* PCI-RT: No SCSI/SATA controller will be present */
- return IOC4_VARIANT_PCI_RT;
-}
-
-/* Adds a new instance of an IOC4 card */
-static int
-ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
-{
- struct ioc4_driver_data *idd;
- struct ioc4_submodule *is;
- uint32_t pcmd;
- int ret;
-
- /* Enable IOC4 and take ownership of it */
- if ((ret = pci_enable_device(pdev))) {
- printk(KERN_WARNING
- "%s: Failed to enable IOC4 device for pci_dev %s.\n",
- __FUNCTION__, pci_name(pdev));
- goto out;
- }
- pci_set_master(pdev);
-
- /* Set up per-IOC4 data */
- idd = kmalloc(sizeof(struct ioc4_driver_data), GFP_KERNEL);
- if (!idd) {
- printk(KERN_WARNING
- "%s: Failed to allocate IOC4 data for pci_dev %s.\n",
- __FUNCTION__, pci_name(pdev));
- ret = -ENODEV;
- goto out_idd;
- }
- idd->idd_pdev = pdev;
- idd->idd_pci_id = pci_id;
-
- /* Map IOC4 misc registers. These are shared between subdevices
- * so the main IOC4 module manages them.
- */
- idd->idd_bar0 = pci_resource_start(idd->idd_pdev, 0);
- if (!idd->idd_bar0) {
- printk(KERN_WARNING
- "%s: Unable to find IOC4 misc resource "
- "for pci_dev %s.\n",
- __FUNCTION__, pci_name(idd->idd_pdev));
- ret = -ENODEV;
- goto out_pci;
- }
- if (!request_region(idd->idd_bar0, sizeof(struct ioc4_misc_regs),
- "ioc4_misc")) {
- printk(KERN_WARNING
- "%s: Unable to request IOC4 misc region "
- "for pci_dev %s.\n",
- __FUNCTION__, pci_name(idd->idd_pdev));
- ret = -ENODEV;
- goto out_pci;
- }
- idd->idd_misc_regs = ioremap(idd->idd_bar0,
- sizeof(struct ioc4_misc_regs));
- if (!idd->idd_misc_regs) {
- printk(KERN_WARNING
- "%s: Unable to remap IOC4 misc region "
- "for pci_dev %s.\n",
- __FUNCTION__, pci_name(idd->idd_pdev));
- ret = -ENODEV;
- goto out_misc_region;
- }
-
- /* Failsafe portion of per-IOC4 initialization */
-
- /* Detect card variant */
- idd->idd_variant = ioc4_variant(idd);
- printk(KERN_INFO "IOC4 %s: %s card detected.\n", pci_name(pdev),
- idd->idd_variant == IOC4_VARIANT_IO9 ? "IO9" :
- idd->idd_variant == IOC4_VARIANT_PCI_RT ? "PCI-RT" :
- idd->idd_variant == IOC4_VARIANT_IO10 ? "IO10" : "unknown");
-
- /* Initialize IOC4 */
- pci_read_config_dword(idd->idd_pdev, PCI_COMMAND, &pcmd);
- pci_write_config_dword(idd->idd_pdev, PCI_COMMAND,
- pcmd | PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
-
- /* Determine PCI clock */
- ioc4_clock_calibrate(idd);
-
- /* Disable/clear all interrupts. Need to do this here lest
- * one submodule request the shared IOC4 IRQ, but interrupt
- * is generated by a different subdevice.
- */
- /* Disable */
- writel(~0, &idd->idd_misc_regs->other_iec.raw);
- writel(~0, &idd->idd_misc_regs->sio_iec);
- /* Clear (i.e. acknowledge) */
- writel(~0, &idd->idd_misc_regs->other_ir.raw);
- writel(~0, &idd->idd_misc_regs->sio_ir);
-
- /* Track PCI-device specific data */
- idd->idd_serial_data = NULL;
- pci_set_drvdata(idd->idd_pdev, idd);
-
- mutex_lock(&ioc4_mutex);
- list_add_tail(&idd->idd_list, &ioc4_devices);
-
- /* Add this IOC4 to all submodules */
- list_for_each_entry(is, &ioc4_submodules, is_list) {
- if (is->is_probe && is->is_probe(idd)) {
- printk(KERN_WARNING
- "%s: IOC4 submodule 0x%s probe failed "
- "for pci_dev %s.\n",
- __FUNCTION__, module_name(is->is_owner),
- pci_name(idd->idd_pdev));
- }
- }
- mutex_unlock(&ioc4_mutex);
-
- return 0;
-
-out_misc_region:
- release_region(idd->idd_bar0, sizeof(struct ioc4_misc_regs));
-out_pci:
- kfree(idd);
-out_idd:
- pci_disable_device(pdev);
-out:
- return ret;
-}
-
-/* Removes a particular instance of an IOC4 card. */
-static void
-ioc4_remove(struct pci_dev *pdev)
-{
- struct ioc4_submodule *is;
- struct ioc4_driver_data *idd;
-
- idd = pci_get_drvdata(pdev);
-
- /* Remove this IOC4 from all submodules */
- mutex_lock(&ioc4_mutex);
- list_for_each_entry(is, &ioc4_submodules, is_list) {
- if (is->is_remove && is->is_remove(idd)) {
- printk(KERN_WARNING
- "%s: IOC4 submodule 0x%s remove failed "
- "for pci_dev %s.\n",
- __FUNCTION__, module_name(is->is_owner),
- pci_name(idd->idd_pdev));
- }
- }
- mutex_unlock(&ioc4_mutex);
-
- /* Release resources */
- iounmap(idd->idd_misc_regs);
- if (!idd->idd_bar0) {
- printk(KERN_WARNING
- "%s: Unable to get IOC4 misc mapping for pci_dev %s. "
- "Device removal may be incomplete.\n",
- __FUNCTION__, pci_name(idd->idd_pdev));
- }
- release_region(idd->idd_bar0, sizeof(struct ioc4_misc_regs));
-
- /* Disable IOC4 and relinquish */
- pci_disable_device(pdev);
-
- /* Remove and free driver data */
- mutex_lock(&ioc4_mutex);
- list_del(&idd->idd_list);
- mutex_unlock(&ioc4_mutex);
- kfree(idd);
-}
-
-static struct pci_device_id ioc4_id_table[] = {
- {PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC4, PCI_ANY_ID,
- PCI_ANY_ID, 0x0b4000, 0xFFFFFF},
- {0}
-};
-
-static struct pci_driver ioc4_driver = {
- .name = "IOC4",
- .id_table = ioc4_id_table,
- .probe = ioc4_probe,
- .remove = ioc4_remove,
-};
-
-MODULE_DEVICE_TABLE(pci, ioc4_id_table);
-
-/*********************
- * Module management *
- *********************/
-
-/* Module load */
-static int __devinit
-ioc4_init(void)
-{
- return pci_register_driver(&ioc4_driver);
-}
-
-/* Module unload */
-static void __devexit
-ioc4_exit(void)
-{
- pci_unregister_driver(&ioc4_driver);
-}
-
-module_init(ioc4_init);
-module_exit(ioc4_exit);
-
-MODULE_AUTHOR("Brent Casavant - Silicon Graphics, Inc. <bcasavan@sgi.com>");
-MODULE_DESCRIPTION("PCI driver master module for SGI IOC4 Base-IO Card");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(ioc4_register_submodule);
-EXPORT_SYMBOL(ioc4_unregister_submodule);