diff options
author | codeworkx <codeworkx@cyanogenmod.com> | 2012-09-18 18:51:21 +0200 |
---|---|---|
committer | codeworkx <codeworkx@cyanogenmod.com> | 2012-09-18 19:02:23 +0200 |
commit | f991bd2a427ec6a5e049e19745aba6a5d7f006c4 (patch) | |
tree | c6f0d428403c32c95335c34b3f0105c2e4c8087d /drivers/usb/core/hub.c | |
parent | c28265764ec6ad9995eb0c761a376ffc9f141fcd (diff) | |
parent | bea37381fd9a34c6660e5195d31beea86aa3dda3 (diff) | |
download | kernel_samsung_smdk4412-f991bd2a427ec6a5e049e19745aba6a5d7f006c4.zip kernel_samsung_smdk4412-f991bd2a427ec6a5e049e19745aba6a5d7f006c4.tar.gz kernel_samsung_smdk4412-f991bd2a427ec6a5e049e19745aba6a5d7f006c4.tar.bz2 |
Merge linux-3.0.31 from korg into jellybean
Conflicts:
arch/arm/mm/proc-v7.S
drivers/base/core.c
drivers/gpu/drm/i915/i915_gem_execbuffer.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_lvds.c
drivers/gpu/drm/radeon/evergreen.c
drivers/gpu/drm/radeon/r100.c
drivers/gpu/drm/radeon/radeon_connectors.c
drivers/gpu/drm/radeon/rs600.c
drivers/usb/core/hub.c
drivers/usb/host/xhci-pci.c
drivers/usb/host/xhci.c
drivers/usb/serial/qcserial.c
fs/proc/base.c
Change-Id: Ia98b35db3f8c0bfd95817867d3acb85be8e5e772
Diffstat (limited to 'drivers/usb/core/hub.c')
-rw-r--r-- | drivers/usb/core/hub.c | 54 |
1 files changed, 27 insertions, 27 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index c0c8644..069739b 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -608,7 +608,7 @@ static int hub_hub_status(struct usb_hub *hub, "%s failed (err = %d)\n", __func__, ret); else { *status = le16_to_cpu(hub->status->hub.wHubStatus); - *change = le16_to_cpu(hub->status->hub.wHubChange); + *change = le16_to_cpu(hub->status->hub.wHubChange); ret = 0; } mutex_unlock(&hub->status_mutex); @@ -705,10 +705,26 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) if (type == HUB_INIT3) goto init3; - /* After a resume, port power should still be on. + /* The superspeed hub except for root hub has to use Hub Depth + * value as an offset into the route string to locate the bits + * it uses to determine the downstream port number. So hub driver + * should send a set hub depth request to superspeed hub after + * the superspeed hub is set configuration in initialization or + * reset procedure. + * + * After a resume, port power should still be on. * For any other type of activation, turn it on. */ if (type != HUB_RESUME) { + if (hdev->parent && hub_is_superspeed(hdev)) { + ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), + HUB_SET_DEPTH, USB_RT_HUB, + hdev->level - 1, 0, NULL, 0, + USB_CTRL_SET_TIMEOUT); + if (ret < 0) + dev_err(hub->intfdev, + "set hub depth failed\n"); + } /* Speed up system boot by using a delayed_work for the * hub's initial power-up delays. This is pretty awkward @@ -991,18 +1007,6 @@ static int hub_configure(struct usb_hub *hub, goto fail; } - if (hub_is_superspeed(hdev) && (hdev->parent != NULL)) { - ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), - HUB_SET_DEPTH, USB_RT_HUB, - hdev->level - 1, 0, NULL, 0, - USB_CTRL_SET_TIMEOUT); - - if (ret < 0) { - message = "can't set hub depth"; - goto fail; - } - } - /* Request the entire hub descriptor. * hub->descriptor can handle USB_MAXCHILDREN ports, * but the hub can/will return fewer bytes here. @@ -1644,15 +1648,12 @@ void usb_disconnect(struct usb_device **pdev) { struct usb_device *udev = *pdev; int i; - struct usb_hcd *hcd; if (!udev) { pr_debug ("%s nodev\n", __func__); return; } - hcd = bus_to_hcd(udev->bus); - /* mark the device as inactive, so any further urb submissions for * this device (and any of its children) will fail immediately. * this quiesces everything except pending urbs. @@ -1674,9 +1675,7 @@ void usb_disconnect(struct usb_device **pdev) * so that the hardware is now fully quiesced. */ dev_dbg (&udev->dev, "unregistering device\n"); - mutex_lock(hcd->bandwidth_mutex); usb_disable_device(udev, 0); - mutex_unlock(hcd->bandwidth_mutex); usb_hcd_synchronize_unlinks(udev); usb_remove_ep_devs(&udev->ep0); @@ -2426,6 +2425,7 @@ static int finish_port_resume(struct usb_device *udev) * operation is carried out here, after the port has been * resumed. */ + if (udev->reset_resume) retry_reset_resume: status = usb_reset_and_verify_device(udev); @@ -2718,7 +2718,7 @@ EXPORT_SYMBOL_GPL(usb_root_hub_lost_power); * Between connect detection and reset signaling there must be a delay * of 100ms at least for debounce and power-settling. The corresponding * timer shall restart whenever the downstream port detects a disconnect. - * + * * Apparently there are some bluetooth and irda-dongles and a number of * low-speed devices for which this debounce period may last over a second. * Not covered by the spec - but easy to deal with. @@ -2890,7 +2890,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, default: goto fail; } - + type = ""; switch (udev->speed) { case USB_SPEED_LOW: speed = "low"; break; @@ -2925,7 +2925,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, udev->tt = &hub->tt; udev->ttport = port1; } - + /* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way? * Because device hardware and firmware is sometimes buggy in * this area, and this is how Linux has done it for ages. @@ -3073,7 +3073,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i); usb_ep0_reinit(udev); } - + retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE); if (retval < (signed)sizeof(udev->descriptor)) { dev_err(&udev->dev, "device descriptor read/all, error %d\n", @@ -3333,7 +3333,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, goto loop_disable; } } - + /* check for devices running slower than they could */ if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200 && udev->speed == USB_SPEED_FULL @@ -3391,7 +3391,7 @@ loop: !(hcd->driver->port_handed_over)(hcd, port1)) dev_err(hub_dev, "unable to enumerate USB device on port %d\n", port1); - + done: hub_port_disable(hub, port1, 1); if (hcd->driver->relinquish_port && !hub->hdev->parent) @@ -3877,7 +3877,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev) if (ret < 0) goto re_enumerate; - + /* Device might have changed firmware (DFU or similar) */ if (descriptors_changed(udev, &descriptor)) { dev_info(&udev->dev, "device firmware changed\n"); @@ -3950,7 +3950,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev) done: return 0; - + re_enumerate: hub_port_logical_disconnect(parent_hub, port1); return -ENODEV; |