USB: ehci-fsl: Fix 'have_sysif_regs' detection

Previously a check was done on an ID register at the base of a CPU's
internal USB registers to determine if system interface regsiters were
present.  The check looked for an ID register that had the format
ID[0:5] == ~ID[8:13] as described in the MPC5121 User's Manual to
determine if a MPC5121 or MPC83xx/85xx was being used.

There are two issues with this method:
- The ID register is not defined on the MPC83xx/85xx CPUs, so its
  unclear what is being checked on them.
- Newer CPUs such as the P4080 also don't document the ID register, but
  do share the same format as the MPC5121.  Thus the previous code did
  not set 'have_sysif_regs' properly which results in the P4080 not
  properly initializing its USB ports.

Using the device tree 'compatible' node is a cleaner way to determine if
'have_sysif_regs' should be set and resolves the USB initialization issue
seen on the P4080.

Tested on a P4080-based system and compile tested on mpc512x_defconfig
with Freescale EHCI driver enabled.

Cc: Anatolij Gustschin <agust@denx.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 8 insertions, 3 deletions

diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index 574b99e..79a66d6 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -262,19 +262,24 @@ static void fsl_usb2_mpc5121_exit(struct platform_device *pdev)
 	}
 }
 
-struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = {
+static struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = {
 	.big_endian_desc = 1,
 	.big_endian_mmio = 1,
 	.es = 1,
+	.have_sysif_regs = 0,
 	.le_setup_buf = 1,
 	.init = fsl_usb2_mpc5121_init,
 	.exit = fsl_usb2_mpc5121_exit,
 };
 #endif /* CONFIG_PPC_MPC512x */
 
+static struct fsl_usb2_platform_data fsl_usb2_mpc8xxx_pd = {
+	.have_sysif_regs = 1,
+};
+
 static const struct of_device_id fsl_usb2_mph_dr_of_match[] = {
-	{ .compatible = "fsl-usb2-mph", },
-	{ .compatible = "fsl-usb2-dr", },
+	{ .compatible = "fsl-usb2-mph", .data = &fsl_usb2_mpc8xxx_pd, },
+	{ .compatible = "fsl-usb2-dr", .data = &fsl_usb2_mpc8xxx_pd, },
 #ifdef CONFIG_PPC_MPC512x
 	{ .compatible = "fsl,mpc5121-usb2-dr", .data = &fsl_usb2_mpc5121_pd, },
 #endif