aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/xhci.c
diff options
context:
space:
mode:
authorPaul Mundt <lethal@linux-sh.org>2010-07-05 15:46:08 +0900
committerPaul Mundt <lethal@linux-sh.org>2010-07-05 15:46:08 +0900
commit285eba57db7bd7d7c3c5929fb8621fdcaaea1b00 (patch)
treea9e7f0563cef296b24c53b20dbb388ec5c210172 /drivers/usb/host/xhci.c
parent1c14e6cecb1811543b1016f27e5d308fbea8c08a (diff)
parent815c4163b6c8ebf8152f42b0a5fd015cfdcedc78 (diff)
downloadkernel_samsung_smdk4412-285eba57db7bd7d7c3c5929fb8621fdcaaea1b00.zip
kernel_samsung_smdk4412-285eba57db7bd7d7c3c5929fb8621fdcaaea1b00.tar.gz
kernel_samsung_smdk4412-285eba57db7bd7d7c3c5929fb8621fdcaaea1b00.tar.bz2
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts: include/linux/serial_sci.h Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Diffstat (limited to 'drivers/usb/host/xhci.c')
-rw-r--r--drivers/usb/host/xhci.c57
1 files changed, 49 insertions, 8 deletions
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 40e0a0c..27345cd 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -106,6 +106,33 @@ int xhci_halt(struct xhci_hcd *xhci)
}
/*
+ * Set the run bit and wait for the host to be running.
+ */
+int xhci_start(struct xhci_hcd *xhci)
+{
+ u32 temp;
+ int ret;
+
+ temp = xhci_readl(xhci, &xhci->op_regs->command);
+ temp |= (CMD_RUN);
+ xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n",
+ temp);
+ xhci_writel(xhci, temp, &xhci->op_regs->command);
+
+ /*
+ * Wait for the HCHalted Status bit to be 0 to indicate the host is
+ * running.
+ */
+ ret = handshake(xhci, &xhci->op_regs->status,
+ STS_HALT, 0, XHCI_MAX_HALT_USEC);
+ if (ret == -ETIMEDOUT)
+ xhci_err(xhci, "Host took too long to start, "
+ "waited %u microseconds.\n",
+ XHCI_MAX_HALT_USEC);
+ return ret;
+}
+
+/*
* Reset a halted HC, and set the internal HC state to HC_STATE_HALT.
*
* This resets pipelines, timers, counters, state machines, etc.
@@ -116,6 +143,7 @@ int xhci_reset(struct xhci_hcd *xhci)
{
u32 command;
u32 state;
+ int ret;
state = xhci_readl(xhci, &xhci->op_regs->status);
if ((state & STS_HALT) == 0) {
@@ -130,7 +158,17 @@ int xhci_reset(struct xhci_hcd *xhci)
/* XXX: Why does EHCI set this here? Shouldn't other code do this? */
xhci_to_hcd(xhci)->state = HC_STATE_HALT;
- return handshake(xhci, &xhci->op_regs->command, CMD_RESET, 0, 250 * 1000);
+ ret = handshake(xhci, &xhci->op_regs->command,
+ CMD_RESET, 0, 250 * 1000);
+ if (ret)
+ return ret;
+
+ xhci_dbg(xhci, "Wait for controller to be ready for doorbell rings\n");
+ /*
+ * xHCI cannot write to any doorbells or operational registers other
+ * than status until the "Controller Not Ready" flag is cleared.
+ */
+ return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000);
}
@@ -448,17 +486,20 @@ int xhci_run(struct usb_hcd *hcd)
if (NUM_TEST_NOOPS > 0)
doorbell = xhci_setup_one_noop(xhci);
+ if (xhci->quirks & XHCI_NEC_HOST)
+ xhci_queue_vendor_command(xhci, 0, 0, 0,
+ TRB_TYPE(TRB_NEC_GET_FW));
+
+ if (xhci_start(xhci)) {
+ xhci_halt(xhci);
+ return -ENODEV;
+ }
- temp = xhci_readl(xhci, &xhci->op_regs->command);
- temp |= (CMD_RUN);
- xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n",
- temp);
- xhci_writel(xhci, temp, &xhci->op_regs->command);
- /* Flush PCI posted writes */
- temp = xhci_readl(xhci, &xhci->op_regs->command);
xhci_dbg(xhci, "// @%p = 0x%x\n", &xhci->op_regs->command, temp);
if (doorbell)
(*doorbell)(xhci);
+ if (xhci->quirks & XHCI_NEC_HOST)
+ xhci_ring_cmd_db(xhci);
xhci_dbg(xhci, "Finished xhci_run\n");
return 0;