Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (172 commits)
  USB: Add support for SuperSpeed isoc endpoints
  xhci: Clean up cycle bit math used during stalls.
  xhci: Fix cycle bit calculation during stall handling.
  xhci: Update internal dequeue pointers after stalls.
  USB: Disable auto-suspend for USB 3.0 hubs.
  USB: Remove bogus USB_PORT_STAT_SUPER_SPEED symbol.
  xhci: Return canceled URBs immediately when host is halted.
  xhci: Fixes for suspend/resume of shared HCDs.
  xhci: Fix re-init on power loss after resume.
  xhci: Make roothub functions deal with device removal.
  xhci: Limit roothub ports to 15 USB3 & 31 USB2 ports.
  xhci: Return a USB 3.0 hub descriptor for USB3 roothub.
  xhci: Register second xHCI roothub.
  xhci: Change xhci_find_slot_id_by_port() API.
  xhci: Refactor bus suspend state into a struct.
  xhci: Index with a port array instead of PORTSC addresses.
  USB: Set usb_hcd->state and flags for shared roothubs.
  usb: Make core allocate resources per PCI-device.
  usb: Store bus type in usb_hcd, not in driver flags.
  usb: Change usb_hcd->bandwidth_mutex to a pointer.
  ...

1 files changed, 14 insertions, 10 deletions

diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 6dd03f4..75a542e 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -304,8 +304,7 @@ __acquires(musb->lock)
 				}
 
 				/* Maybe start the first request in the queue */
-				request = to_musb_request(
-						next_request(musb_ep));
+				request = next_request(musb_ep);
 				if (!musb_ep->busy && request) {
 					DBG(3, "restarting the request\n");
 					musb_ep_restart(musb, request);
@@ -491,10 +490,12 @@ stall:
 static void ep0_rxstate(struct musb *musb)
 {
 	void __iomem		*regs = musb->control_ep->regs;
+	struct musb_request	*request;
 	struct usb_request	*req;
 	u16			count, csr;
 
-	req = next_ep0_request(musb);
+	request = next_ep0_request(musb);
+	req = &request->request;
 
 	/* read packet and ack; or stall because of gadget driver bug:
 	 * should have provided the rx buffer before setup() returned.
@@ -544,17 +545,20 @@ static void ep0_rxstate(struct musb *musb)
 static void ep0_txstate(struct musb *musb)
 {
 	void __iomem		*regs = musb->control_ep->regs;
-	struct usb_request	*request = next_ep0_request(musb);
+	struct musb_request	*req = next_ep0_request(musb);
+	struct usb_request	*request;
 	u16			csr = MUSB_CSR0_TXPKTRDY;
 	u8			*fifo_src;
 	u8			fifo_count;
 
-	if (!request) {
+	if (!req) {
 		/* WARN_ON(1); */
 		DBG(2, "odd; csr0 %04x\n", musb_readw(regs, MUSB_CSR0));
 		return;
 	}
 
+	request = &req->request;
+
 	/* load the data */
 	fifo_src = (u8 *) request->buf + request->actual;
 	fifo_count = min((unsigned) MUSB_EP0_FIFOSIZE,
@@ -598,7 +602,7 @@ static void ep0_txstate(struct musb *musb)
 static void
 musb_read_setup(struct musb *musb, struct usb_ctrlrequest *req)
 {
-	struct usb_request	*r;
+	struct musb_request	*r;
 	void __iomem		*regs = musb->control_ep->regs;
 
 	musb_read_fifo(&musb->endpoints[0], sizeof *req, (u8 *)req);
@@ -616,7 +620,7 @@ musb_read_setup(struct musb *musb, struct usb_ctrlrequest *req)
 	/* clean up any leftover transfers */
 	r = next_ep0_request(musb);
 	if (r)
-		musb_g_ep0_giveback(musb, r);
+		musb_g_ep0_giveback(musb, &r->request);
 
 	/* For zero-data requests we want to delay the STATUS stage to
 	 * avoid SETUPEND errors.  If we read data (OUT), delay accepting
@@ -758,11 +762,11 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb)
 	case MUSB_EP0_STAGE_STATUSOUT:
 		/* end of sequence #1: write to host (TX state) */
 		{
-			struct usb_request	*req;
+			struct musb_request	*req;
 
 			req = next_ep0_request(musb);
 			if (req)
-				musb_g_ep0_giveback(musb, req);
+				musb_g_ep0_giveback(musb, &req->request);
 		}
 
 		/*
@@ -961,7 +965,7 @@ musb_g_ep0_queue(struct usb_ep *e, struct usb_request *r, gfp_t gfp_flags)
 	}
 
 	/* add request to the list */
-	list_add_tail(&(req->request.list), &(ep->req_list));
+	list_add_tail(&req->list, &ep->req_list);
 
 	DBG(3, "queue to %s (%s), length=%d\n",
 			ep->name, ep->is_in ? "IN/TX" : "OUT/RX",