Merge linux-3.0.31 from korg into jellybean

Conflicts:
	arch/arm/mm/proc-v7.S
	drivers/base/core.c
	drivers/gpu/drm/i915/i915_gem_execbuffer.c
	drivers/gpu/drm/i915/intel_display.c
	drivers/gpu/drm/i915/intel_lvds.c
	drivers/gpu/drm/radeon/evergreen.c
	drivers/gpu/drm/radeon/r100.c
	drivers/gpu/drm/radeon/radeon_connectors.c
	drivers/gpu/drm/radeon/rs600.c
	drivers/usb/core/hub.c
	drivers/usb/host/xhci-pci.c
	drivers/usb/host/xhci.c
	drivers/usb/serial/qcserial.c
	fs/proc/base.c

Change-Id: Ia98b35db3f8c0bfd95817867d3acb85be8e5e772

60 files changed, 868 insertions, 424 deletions

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 8faa23c..158f631 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -554,10 +554,18 @@ static void acm_port_down(struct acm *acm)
 
 static void acm_tty_hangup(struct tty_struct *tty)
 {
-	struct acm *acm = tty->driver_data;
-	tty_port_hangup(&acm->port);
+	struct acm *acm;
+
 	mutex_lock(&open_mutex);
+	acm = tty->driver_data;
+
+	if (!acm)
+		goto out;
+
+	tty_port_hangup(&acm->port);
 	acm_port_down(acm);
+
+out:
 	mutex_unlock(&open_mutex);
 }
 
@@ -1183,6 +1191,8 @@ made_compressed_probe:
 		i = device_create_file(&intf->dev, &dev_attr_wCountryCodes);
 		if (i < 0) {
 			kfree(acm->country_codes);
+			acm->country_codes = NULL;
+			acm->country_code_size = 0;
 			goto skip_countries;
 		}
 
@@ -1191,6 +1201,8 @@ made_compressed_probe:
 		if (i < 0) {
 			device_remove_file(&intf->dev, &dev_attr_wCountryCodes);
 			kfree(acm->country_codes);
+			acm->country_codes = NULL;
+			acm->country_code_size = 0;
 			goto skip_countries;
 		}
 	}
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 2b9ff51..00b7bf9 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -57,6 +57,8 @@ MODULE_DEVICE_TABLE (usb, wdm_ids);
 
 #define WDM_MAX			16
 
+/* CDC-WMC r1.1 requires wMaxCommand to be "at least 256 decimal (0x100)" */
+#define WDM_DEFAULT_BUFSIZE	256
 
 static DEFINE_MUTEX(wdm_mutex);
 
@@ -88,7 +90,8 @@ struct wdm_device {
 	int			count;
 	dma_addr_t		shandle;
 	dma_addr_t		ihandle;
-	struct mutex		lock;
+	struct mutex		wlock;
+	struct mutex		rlock;
 	wait_queue_head_t	wait;
 	struct work_struct	rxwork;
 	int			werr;
@@ -105,8 +108,9 @@ static void wdm_out_callback(struct urb *urb)
 	spin_lock(&desc->iuspin);
 	desc->werr = urb->status;
 	spin_unlock(&desc->iuspin);
-	clear_bit(WDM_IN_USE, &desc->flags);
 	kfree(desc->outbuf);
+	desc->outbuf = NULL;
+	clear_bit(WDM_IN_USE, &desc->flags);
 	wake_up(&desc->wait);
 }
 
@@ -309,7 +313,7 @@ static ssize_t wdm_write
 	if (we < 0)
 		return -EIO;
 
-	desc->outbuf = buf = kmalloc(count, GFP_KERNEL);
+	buf = kmalloc(count, GFP_KERNEL);
 	if (!buf) {
 		rv = -ENOMEM;
 		goto outnl;
@@ -323,7 +327,7 @@ static ssize_t wdm_write
 	}
 
 	/* concurrent writes and disconnect */
-	r = mutex_lock_interruptible(&desc->lock);
+	r = mutex_lock_interruptible(&desc->wlock);
 	rv = -ERESTARTSYS;
 	if (r) {
 		kfree(buf);
@@ -373,10 +377,12 @@ static ssize_t wdm_write
 	req->wIndex = desc->inum;
 	req->wLength = cpu_to_le16(count);
 	set_bit(WDM_IN_USE, &desc->flags);
+	desc->outbuf = buf;
 
 	rv = usb_submit_urb(desc->command, GFP_KERNEL);
 	if (rv < 0) {
 		kfree(buf);
+		desc->outbuf = NULL;
 		clear_bit(WDM_IN_USE, &desc->flags);
 		dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv);
 	} else {
@@ -386,7 +392,7 @@ static ssize_t wdm_write
 out:
 	usb_autopm_put_interface(desc->intf);
 outnp:
-	mutex_unlock(&desc->lock);
+	mutex_unlock(&desc->wlock);
 outnl:
 	return rv < 0 ? rv : count;
 }
@@ -394,16 +400,17 @@ outnl:
 static ssize_t wdm_read
 (struct file *file, char __user *buffer, size_t count, loff_t *ppos)
 {
-	int rv, cntr = 0;
+	int rv, cntr;
 	int i = 0;
 	struct wdm_device *desc = file->private_data;
 
 
-	rv = mutex_lock_interruptible(&desc->lock); /*concurrent reads */
+	rv = mutex_lock_interruptible(&desc->rlock); /*concurrent reads */
 	if (rv < 0)
 		return -ERESTARTSYS;
 
-	if (desc->length == 0) {
+	cntr = ACCESS_ONCE(desc->length);
+	if (cntr == 0) {
 		desc->read = 0;
 retry:
 		if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
@@ -453,17 +460,20 @@ retry:
 			spin_unlock_irq(&desc->iuspin);
 			goto retry;
 		}
-		clear_bit(WDM_READ, &desc->flags);
+		cntr = desc->length;
 		spin_unlock_irq(&desc->iuspin);
 	}
 
-	cntr = count > desc->length ? desc->length : count;
+	if (cntr > count)
+		cntr = count;
 	rv = copy_to_user(buffer, desc->ubuf, cntr);
 	if (rv > 0) {
 		rv = -EFAULT;
 		goto err;
 	}
 
+	spin_lock_irq(&desc->iuspin);
+
 	for (i = 0; i < desc->length - cntr; i++)
 		desc->ubuf[i] = desc->ubuf[i + cntr];
 
@@ -471,10 +481,13 @@ retry:
 	/* in case we had outstanding data */
 	if (!desc->length)
 		clear_bit(WDM_READ, &desc->flags);
+
+	spin_unlock_irq(&desc->iuspin);
+
 	rv = cntr;
 
 err:
-	mutex_unlock(&desc->lock);
+	mutex_unlock(&desc->rlock);
 	return rv;
 }
 
@@ -540,7 +553,8 @@ static int wdm_open(struct inode *inode, struct file *file)
 	}
 	intf->needs_remote_wakeup = 1;
 
-	mutex_lock(&desc->lock);
+	/* using write lock to protect desc->count */
+	mutex_lock(&desc->wlock);
 	if (!desc->count++) {
 		desc->werr = 0;
 		desc->rerr = 0;
@@ -553,7 +567,7 @@ static int wdm_open(struct inode *inode, struct file *file)
 	} else {
 		rv = 0;
 	}
-	mutex_unlock(&desc->lock);
+	mutex_unlock(&desc->wlock);
 	usb_autopm_put_interface(desc->intf);
 out:
 	mutex_unlock(&wdm_mutex);
@@ -565,9 +579,11 @@ static int wdm_release(struct inode *inode, struct file *file)
 	struct wdm_device *desc = file->private_data;
 
 	mutex_lock(&wdm_mutex);
-	mutex_lock(&desc->lock);
+
+	/* using write lock to protect desc->count */
+	mutex_lock(&desc->wlock);
 	desc->count--;
-	mutex_unlock(&desc->lock);
+	mutex_unlock(&desc->wlock);
 
 	if (!desc->count) {
 		dev_dbg(&desc->intf->dev, "wdm_release: cleanup");
@@ -630,7 +646,7 @@ static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	struct usb_cdc_dmm_desc *dmhd;
 	u8 *buffer = intf->altsetting->extra;
 	int buflen = intf->altsetting->extralen;
-	u16 maxcom = 0;
+	u16 maxcom = WDM_DEFAULT_BUFSIZE;
 
 	if (!buffer)
 		goto out;
@@ -665,7 +681,8 @@ next_desc:
 	desc = kzalloc(sizeof(struct wdm_device), GFP_KERNEL);
 	if (!desc)
 		goto out;
-	mutex_init(&desc->lock);
+	mutex_init(&desc->rlock);
+	mutex_init(&desc->wlock);
 	spin_lock_init(&desc->iuspin);
 	init_waitqueue_head(&desc->wait);
 	desc->wMaxCommand = maxcom;
@@ -716,7 +733,7 @@ next_desc:
 		goto err;
 
 	desc->inbuf = usb_alloc_coherent(interface_to_usbdev(intf),
-					 desc->bMaxPacketSize0,
+					 desc->wMaxCommand,
 					 GFP_KERNEL,
 					 &desc->response->transfer_dma);
 	if (!desc->inbuf)
@@ -779,11 +796,13 @@ static void wdm_disconnect(struct usb_interface *intf)
 	/* to terminate pending flushes */
 	clear_bit(WDM_IN_USE, &desc->flags);
 	spin_unlock_irqrestore(&desc->iuspin, flags);
-	mutex_lock(&desc->lock);
+	wake_up_all(&desc->wait);
+	mutex_lock(&desc->rlock);
+	mutex_lock(&desc->wlock);
 	kill_urbs(desc);
 	cancel_work_sync(&desc->rxwork);
-	mutex_unlock(&desc->lock);
-	wake_up_all(&desc->wait);
+	mutex_unlock(&desc->wlock);
+	mutex_unlock(&desc->rlock);
 	if (!desc->count)
 		cleanup(desc);
 	mutex_unlock(&wdm_mutex);
@@ -798,8 +817,10 @@ static int wdm_suspend(struct usb_interface *intf, pm_message_t message)
 	dev_dbg(&desc->intf->dev, "wdm%d_suspend\n", intf->minor);
 
 	/* if this is an autosuspend the caller does the locking */
-	if (!(message.event & PM_EVENT_AUTO))
-		mutex_lock(&desc->lock);
+	if (!(message.event & PM_EVENT_AUTO)) {
+		mutex_lock(&desc->rlock);
+		mutex_lock(&desc->wlock);
+	}
 	spin_lock_irq(&desc->iuspin);
 
 	if ((message.event & PM_EVENT_AUTO) &&
@@ -815,8 +836,10 @@ static int wdm_suspend(struct usb_interface *intf, pm_message_t message)
 		kill_urbs(desc);
 		cancel_work_sync(&desc->rxwork);
 	}
-	if (!(message.event & PM_EVENT_AUTO))
-		mutex_unlock(&desc->lock);
+	if (!(message.event & PM_EVENT_AUTO)) {
+		mutex_unlock(&desc->wlock);
+		mutex_unlock(&desc->rlock);
+	}
 
 	return rv;
 }
@@ -854,7 +877,8 @@ static int wdm_pre_reset(struct usb_interface *intf)
 {
 	struct wdm_device *desc = usb_get_intfdata(intf);
 
-	mutex_lock(&desc->lock);
+	mutex_lock(&desc->rlock);
+	mutex_lock(&desc->wlock);
 	kill_urbs(desc);
 
 	/*
@@ -876,7 +900,8 @@ static int wdm_post_reset(struct usb_interface *intf)
 	int rv;
 
 	rv = recover_from_urb_loss(desc);
-	mutex_unlock(&desc->lock);
+	mutex_unlock(&desc->wlock);
+	mutex_unlock(&desc->rlock);
 	return 0;
 }
 
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index ce22f4a..aa7bbbc 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -187,7 +187,10 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		return -ENODEV;
 	dev->current_state = PCI_D0;
 
-	if (!dev->irq) {
+	/* The xHCI driver supports MSI and MSI-X,
+	 * so don't fail if the BIOS doesn't provide a legacy IRQ.
+	 */
+	if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) {
 		dev_err(&dev->dev,
 			"Found HC with no IRQ.  Check BIOS/PCI %s setup!\n",
 			pci_name(dev));
@@ -492,6 +495,15 @@ static int hcd_pci_suspend_noirq(struct device *dev)
 
 	pci_save_state(pci_dev);
 
+	/*
+	 * Some systems crash if an EHCI controller is in D3 during
+	 * a sleep transition.  We have to leave such controllers in D0.
+	 */
+	if (hcd->broken_pci_sleep) {
+		dev_dbg(dev, "Staying in PCI D0\n");
+		return retval;
+	}
+
 	/* If the root hub is dead rather than suspended, disallow remote
 	 * wakeup.  usb_hc_died() should ensure that both hosts are marked as
 	 * dying, so we only need to check the primary roothub.
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 39ea00b..45e0908 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1387,11 +1387,10 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
 					ret = -EAGAIN;
 				else
 					urb->transfer_flags |= URB_DMA_MAP_SG;
-				if (n != urb->num_sgs) {
-					urb->num_sgs = n;
+				urb->num_mapped_sgs = n;
+				if (n != urb->num_sgs)
 					urb->transfer_flags |=
 							URB_DMA_SG_COMBINED;
-				}
 			} else if (urb->sg) {
 				struct scatterlist *sg = urb->sg;
 				urb->transfer_dma = dma_map_page(
@@ -2436,8 +2435,10 @@ int usb_add_hcd(struct usb_hcd *hcd,
 			&& device_can_wakeup(&hcd->self.root_hub->dev))
 		dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
 
-	/* enable irqs just before we start the controller */
-	if (usb_hcd_is_primary_hcd(hcd)) {
+	/* enable irqs just before we start the controller,
+	 * if the BIOS provides legacy PCI irqs.
+	 */
+	if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
 		retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
 		if (retval)
 			goto err_request_irq;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index c0c8644..069739b 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -608,7 +608,7 @@ static int hub_hub_status(struct usb_hub *hub,
 			"%s failed (err = %d)\n", __func__, ret);
 	else {
 		*status = le16_to_cpu(hub->status->hub.wHubStatus);
-		*change = le16_to_cpu(hub->status->hub.wHubChange); 
+		*change = le16_to_cpu(hub->status->hub.wHubChange);
 		ret = 0;
 	}
 	mutex_unlock(&hub->status_mutex);
@@ -705,10 +705,26 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 	if (type == HUB_INIT3)
 		goto init3;
 
-	/* After a resume, port power should still be on.
+	/* The superspeed hub except for root hub has to use Hub Depth
+	 * value as an offset into the route string to locate the bits
+	 * it uses to determine the downstream port number. So hub driver
+	 * should send a set hub depth request to superspeed hub after
+	 * the superspeed hub is set configuration in initialization or
+	 * reset procedure.
+	 *
+	 * After a resume, port power should still be on.
 	 * For any other type of activation, turn it on.
 	 */
 	if (type != HUB_RESUME) {
+		if (hdev->parent && hub_is_superspeed(hdev)) {
+			ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+					HUB_SET_DEPTH, USB_RT_HUB,
+					hdev->level - 1, 0, NULL, 0,
+					USB_CTRL_SET_TIMEOUT);
+			if (ret < 0)
+				dev_err(hub->intfdev,
+						"set hub depth failed\n");
+		}
 
 		/* Speed up system boot by using a delayed_work for the
 		 * hub's initial power-up delays.  This is pretty awkward
@@ -991,18 +1007,6 @@ static int hub_configure(struct usb_hub *hub,
 		goto fail;
 	}
 
-	if (hub_is_superspeed(hdev) && (hdev->parent != NULL)) {
-		ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-				HUB_SET_DEPTH, USB_RT_HUB,
-				hdev->level - 1, 0, NULL, 0,
-				USB_CTRL_SET_TIMEOUT);
-
-		if (ret < 0) {
-			message = "can't set hub depth";
-			goto fail;
-		}
-	}
-
 	/* Request the entire hub descriptor.
 	 * hub->descriptor can handle USB_MAXCHILDREN ports,
 	 * but the hub can/will return fewer bytes here.
@@ -1644,15 +1648,12 @@ void usb_disconnect(struct usb_device **pdev)
 {
 	struct usb_device	*udev = *pdev;
 	int			i;
-	struct usb_hcd		*hcd;
 
 	if (!udev) {
 		pr_debug ("%s nodev\n", __func__);
 		return;
 	}
 
-	hcd = bus_to_hcd(udev->bus);
-
 	/* mark the device as inactive, so any further urb submissions for
 	 * this device (and any of its children) will fail immediately.
 	 * this quiesces everything except pending urbs.
@@ -1674,9 +1675,7 @@ void usb_disconnect(struct usb_device **pdev)
 	 * so that the hardware is now fully quiesced.
 	 */
 	dev_dbg (&udev->dev, "unregistering device\n");
-	mutex_lock(hcd->bandwidth_mutex);
 	usb_disable_device(udev, 0);
-	mutex_unlock(hcd->bandwidth_mutex);
 	usb_hcd_synchronize_unlinks(udev);
 
 	usb_remove_ep_devs(&udev->ep0);
@@ -2426,6 +2425,7 @@ static int finish_port_resume(struct usb_device *udev)
 	 * operation is carried out here, after the port has been
 	 * resumed.
 	 */
+
 	if (udev->reset_resume)
  retry_reset_resume:
 		status = usb_reset_and_verify_device(udev);
@@ -2718,7 +2718,7 @@ EXPORT_SYMBOL_GPL(usb_root_hub_lost_power);
  * Between connect detection and reset signaling there must be a delay
  * of 100ms at least for debounce and power-settling.  The corresponding
  * timer shall restart whenever the downstream port detects a disconnect.
- * 
+ *
  * Apparently there are some bluetooth and irda-dongles and a number of
  * low-speed devices for which this debounce period may last over a second.
  * Not covered by the spec - but easy to deal with.
@@ -2890,7 +2890,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	default:
 		goto fail;
 	}
- 
+
 	type = "";
 	switch (udev->speed) {
 	case USB_SPEED_LOW:	speed = "low";	break;
@@ -2925,7 +2925,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 		udev->tt = &hub->tt;
 		udev->ttport = port1;
 	}
- 
+
 	/* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way?
 	 * Because device hardware and firmware is sometimes buggy in
 	 * this area, and this is how Linux has done it for ages.
@@ -3073,7 +3073,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
 		usb_ep0_reinit(udev);
 	}
-  
+
 	retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE);
 	if (retval < (signed)sizeof(udev->descriptor)) {
 		dev_err(&udev->dev, "device descriptor read/all, error %d\n",
@@ -3333,7 +3333,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 				goto loop_disable;
 			}
 		}
- 
+
 		/* check for devices running slower than they could */
 		if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200
 				&& udev->speed == USB_SPEED_FULL
@@ -3391,7 +3391,7 @@ loop:
 			!(hcd->driver->port_handed_over)(hcd, port1))
 		dev_err(hub_dev, "unable to enumerate USB device on port %d\n",
 				port1);
- 
+
 done:
 	hub_port_disable(hub, port1, 1);
 	if (hcd->driver->relinquish_port && !hub->hdev->parent)
@@ -3877,7 +3877,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 
 	if (ret < 0)
 		goto re_enumerate;
- 
+
 	/* Device might have changed firmware (DFU or similar) */
 	if (descriptors_changed(udev, &descriptor)) {
 		dev_info(&udev->dev, "device firmware changed\n");
@@ -3950,7 +3950,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 
 done:
 	return 0;
- 
+
 re_enumerate:
 	hub_port_logical_disconnect(parent_hub, port1);
 	return -ENODEV;
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 0a8da6f..a7ef9dd 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -325,7 +325,8 @@ static void sg_complete(struct urb *urb)
 				retval = usb_unlink_urb(io->urbs [i]);
 				if (retval != -EINPROGRESS &&
 				    retval != -ENODEV &&
-				    retval != -EBUSY)
+				    retval != -EBUSY &&
+				    retval != -EIDRM)
 					dev_err(&io->dev->dev,
 						"%s, unlink --> %d\n",
 						__func__, retval);
@@ -334,7 +335,6 @@ static void sg_complete(struct urb *urb)
 		}
 		spin_lock(&io->lock);
 	}
-	urb->dev = NULL;
 
 	/* on the last completion, signal usb_sg_wait() */
 	io->bytes += urb->actual_length;
@@ -541,7 +541,6 @@ void usb_sg_wait(struct usb_sg_request *io)
 		case -ENXIO:	/* hc didn't queue this one */
 		case -EAGAIN:
 		case -ENOMEM:
-			io->urbs[i]->dev = NULL;
 			retval = 0;
 			yield();
 			break;
@@ -559,7 +558,6 @@ void usb_sg_wait(struct usb_sg_request *io)
 
 			/* fail any uncompleted urbs */
 		default:
-			io->urbs[i]->dev = NULL;
 			io->urbs[i]->status = retval;
 			dev_dbg(&io->dev->dev, "%s, submit --> %d\n",
 				__func__, retval);
@@ -610,7 +608,10 @@ void usb_sg_cancel(struct usb_sg_request *io)
 			if (!io->urbs [i]->dev)
 				continue;
 			retval = usb_unlink_urb(io->urbs [i]);
-			if (retval != -EINPROGRESS && retval != -EBUSY)
+			if (retval != -EINPROGRESS
+					&& retval != -ENODEV
+					&& retval != -EBUSY
+					&& retval != -EIDRM)
 				dev_warn(&io->dev->dev, "%s, unlink --> %d\n",
 					__func__, retval);
 		}
@@ -1152,8 +1153,6 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
  * Deallocates hcd/hardware state for the endpoints (nuking all or most
  * pending urbs) and usbcore state for the interfaces, so that usbcore
  * must usb_set_configuration() before any interfaces could be used.
- *
- * Must be called with hcd->bandwidth_mutex held.
  */
 void usb_disable_device(struct usb_device *dev, int skip_ep0)
 {
@@ -1206,7 +1205,9 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
 			usb_disable_endpoint(dev, i + USB_DIR_IN, false);
 		}
 		/* Remove endpoints from the host controller internal state */
+		mutex_lock(hcd->bandwidth_mutex);
 		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+		mutex_unlock(hcd->bandwidth_mutex);
 		/* Second pass: remove endpoint pointers */
 	}
 	for (i = skip_ep0; i < 16; ++i) {
@@ -1766,7 +1767,6 @@ free_interfaces:
 	/* if it's already configured, clear out old state first.
 	 * getting rid of old interfaces means unbinding their drivers.
 	 */
-	mutex_lock(hcd->bandwidth_mutex);
 	if (dev->state != USB_STATE_ADDRESS)
 		usb_disable_device(dev, 1);	/* Skip ep0 */
 
@@ -1779,6 +1779,7 @@ free_interfaces:
 	 * host controller will not allow submissions to dropped endpoints.  If
 	 * this call fails, the device state is unchanged.
 	 */
+	mutex_lock(hcd->bandwidth_mutex);
 	ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
 	if (ret < 0) {
 		mutex_unlock(hcd->bandwidth_mutex);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 72275a6..5b9755d 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -117,9 +117,12 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x06a3, 0x0006), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
 
-	/* Guillemot Webcam Hercules Dualpix Exchange*/
+	/* Guillemot Webcam Hercules Dualpix Exchange (2nd ID) */
 	{ USB_DEVICE(0x06f8, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Guillemot Webcam Hercules Dualpix Exchange*/
+	{ USB_DEVICE(0x06f8, 0x3005), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* M-Systems Flash Disk Pioneers */
 	{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
 
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 3d23ed6..4fcb761 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -572,7 +572,7 @@ config USB_LANGWELL
 	select USB_GADGET_SELECTED
 
 config USB_GADGET_EG20T
-	boolean "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH UDC"
+	tristate "Intel EG20T PCH/OKI SEMICONDUCTOR IOH(ML7213/ML7831) UDC"
 	depends on PCI
 	select USB_GADGET_DUALSPEED
 	help
@@ -590,8 +590,9 @@ config USB_GADGET_EG20T
 
 	  This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is
 	  for IVI(In-Vehicle Infotainment) use.
-	  ML7213 is companion chip for Intel Atom E6xx series.
-	  ML7213 is completely compatible for Intel EG20T PCH.
+	  ML7831 is for general purpose use.
+	  ML7213/ML7831 is companion chip for Intel Atom E6xx series.
+	  ML7213/ML7831 is completely compatible for Intel EG20T PCH.
 
 config USB_EG20T
 	tristate
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 19fffcc..1cefb9f 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -720,7 +720,7 @@ static long ffs_ep0_ioctl(struct file *file, unsigned code, unsigned long value)
 	if (code == FUNCTIONFS_INTERFACE_REVMAP) {
 		struct ffs_function *func = ffs->func;
 		ret = func ? ffs_func_revmap_intf(func, value) : -ENODEV;
-	} else if (gadget->ops->ioctl) {
+	} else if (gadget && gadget->ops->ioctl) {
 		ret = gadget->ops->ioctl(gadget, code, value);
 	} else {
 		ret = -ENOTTY;
diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c
index b37960f..0e64a47 100644
--- a/drivers/usb/gadget/f_loopback.c
+++ b/drivers/usb/gadget/f_loopback.c
@@ -373,7 +373,7 @@ int __init loopback_add(struct usb_composite_dev *cdev, bool autoresume)
 
 	/* support autoresume for remote wakeup testing */
 	if (autoresume)
-		sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+		loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 
 	/* support OTG systems */
 	if (gadget_is_otg(cdev->gadget)) {
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 4616b1f..92b7736 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -2263,7 +2263,7 @@ unknown_cmnd:
 		common->data_size_from_cmnd = 0;
 		sprintf(unknown, "Unknown x%02x", common->cmnd[0]);
 		reply = check_command(common, common->cmnd_size,
-				      DATA_DIR_UNKNOWN, 0xff, 0, unknown);
+				      DATA_DIR_UNKNOWN, ~0, 0, unknown);
 		if (reply == 0) {
 			common->curlun->sense_data = SS_INVALID_COMMAND;
 			reply = -EINVAL;
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 0360f56..e358130 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -2553,7 +2553,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
 		fsg->data_size_from_cmnd = 0;
 		sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]);
 		if ((reply = check_command(fsg, fsg->cmnd_size,
-				DATA_DIR_UNKNOWN, 0xff, 0, unknown)) == 0) {
+				DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) {
 			fsg->curlun->sense_data = SS_INVALID_COMMAND;
 			reply = -EINVAL;
 		}
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 4e48331..5308381 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -767,7 +767,7 @@ out:
  * @is_last: return flag if it is the last dTD of the request
  * return: pointer to the built dTD */
 static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
-		dma_addr_t *dma, int *is_last)
+		dma_addr_t *dma, int *is_last, gfp_t gfp_flags)
 {
 	u32 swap_temp;
 	struct ep_td_struct *dtd;
@@ -776,7 +776,7 @@ static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
 	*length = min(req->req.length - req->req.actual,
 			(unsigned)EP_MAX_LENGTH_TRANSFER);
 
-	dtd = dma_pool_alloc(udc_controller->td_pool, GFP_KERNEL, dma);
+	dtd = dma_pool_alloc(udc_controller->td_pool, gfp_flags, dma);
 	if (dtd == NULL)
 		return dtd;
 
@@ -826,7 +826,7 @@ static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
 }
 
 /* Generate dtd chain for a request */
-static int fsl_req_to_dtd(struct fsl_req *req)
+static int fsl_req_to_dtd(struct fsl_req *req, gfp_t gfp_flags)
 {
 	unsigned	count;
 	int		is_last;
@@ -835,7 +835,7 @@ static int fsl_req_to_dtd(struct fsl_req *req)
 	dma_addr_t dma;
 
 	do {
-		dtd = fsl_build_dtd(req, &count, &dma, &is_last);
+		dtd = fsl_build_dtd(req, &count, &dma, &is_last, gfp_flags);
 		if (dtd == NULL)
 			return -ENOMEM;
 
@@ -909,13 +909,11 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	req->req.actual = 0;
 	req->dtd_count = 0;
 
-	spin_lock_irqsave(&udc->lock, flags);
-
 	/* build dtds and push them to device queue */
-	if (!fsl_req_to_dtd(req)) {
+	if (!fsl_req_to_dtd(req, gfp_flags)) {
+		spin_lock_irqsave(&udc->lock, flags);
 		fsl_queue_td(ep, req);
 	} else {
-		spin_unlock_irqrestore(&udc->lock, flags);
 		return -ENOMEM;
 	}
 
@@ -1294,7 +1292,7 @@ static int ep0_prime_status(struct fsl_udc *udc, int direction)
 			ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
 	req->mapped = 1;
 
-	if (fsl_req_to_dtd(req) == 0)
+	if (fsl_req_to_dtd(req, GFP_ATOMIC) == 0)
 		fsl_queue_td(ep, req);
 	else
 		return -ENOMEM;
@@ -1378,7 +1376,7 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value,
 	req->mapped = 1;
 
 	/* prime the data phase */
-	if ((fsl_req_to_dtd(req) == 0))
+	if ((fsl_req_to_dtd(req, GFP_ATOMIC) == 0))
 		fsl_queue_td(ep, req);
 	else			/* no mem */
 		goto stall;
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
index 2523e54..79afa82 100644
--- a/drivers/usb/gadget/hid.c
+++ b/drivers/usb/gadget/hid.c
@@ -69,9 +69,9 @@ static struct usb_device_descriptor device_desc = {
 	/* .bDeviceClass =		USB_CLASS_COMM, */
 	/* .bDeviceSubClass =	0, */
 	/* .bDeviceProtocol =	0, */
-	.bDeviceClass =		0xEF,
-	.bDeviceSubClass =	2,
-	.bDeviceProtocol =	1,
+	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
+	.bDeviceSubClass =	0,
+	.bDeviceProtocol =	0,
 	/* .bMaxPacketSize0 = f(hardware) */
 
 	/* Vendor and product id can be overridden by module parameters.  */
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index a56876a..febadaa 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -1050,6 +1050,8 @@ ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
 // FIXME don't call this with the spinlock held ...
 				if (copy_to_user (buf, dev->req->buf, len))
 					retval = -EFAULT;
+				else
+					retval = len;
 				clean_req (dev->gadget->ep0, dev->req);
 				/* NOTE userspace can't yet choose to stall */
 			}
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index 68dbcc3..1852c8a 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -320,6 +320,7 @@ struct pch_udc_ep {
  * @registered:		driver regsitered with system
  * @suspended:		driver in suspended state
  * @connected:		gadget driver associated
+ * @vbus_session:	required vbus_session state
  * @set_cfg_not_acked:	pending acknowledgement 4 setup
  * @waiting_zlp_ack:	pending acknowledgement 4 ZLP
  * @data_requests:	DMA pool for data requests
@@ -346,6 +347,7 @@ struct pch_udc_dev {
 			registered:1,
 			suspended:1,
 			connected:1,
+			vbus_session:1,
 			set_cfg_not_acked:1,
 			waiting_zlp_ack:1;
 	struct pci_pool		*data_requests;
@@ -363,6 +365,7 @@ struct pch_udc_dev {
 #define PCI_DEVICE_ID_INTEL_EG20T_UDC	0x8808
 #define PCI_VENDOR_ID_ROHM		0x10DB
 #define PCI_DEVICE_ID_ML7213_IOH_UDC	0x801D
+#define PCI_DEVICE_ID_ML7831_IOH_UDC	0x8808
 
 static const char	ep0_string[] = "ep0in";
 static DEFINE_SPINLOCK(udc_stall_spinlock);	/* stall spin lock */
@@ -562,6 +565,29 @@ static void pch_udc_clear_disconnect(struct pch_udc_dev *dev)
 }
 
 /**
+ * pch_udc_reconnect() - This API initializes usb device controller,
+ *						and clear the disconnect status.
+ * @dev:		Reference to pch_udc_regs structure
+ */
+static void pch_udc_init(struct pch_udc_dev *dev);
+static void pch_udc_reconnect(struct pch_udc_dev *dev)
+{
+	pch_udc_init(dev);
+
+	/* enable device interrupts */
+	/* pch_udc_enable_interrupts() */
+	pch_udc_bit_clr(dev, UDC_DEVIRQMSK_ADDR,
+			UDC_DEVINT_UR | UDC_DEVINT_ENUM);
+
+	/* Clear the disconnect */
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+	pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_SD);
+	mdelay(1);
+	/* Resume USB signalling */
+	pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+}
+
+/**
  * pch_udc_vbus_session() - set or clearr the disconnect status.
  * @dev:	Reference to pch_udc_regs structure
  * @is_active:	Parameter specifying the action
@@ -571,10 +597,18 @@ static void pch_udc_clear_disconnect(struct pch_udc_dev *dev)
 static inline void pch_udc_vbus_session(struct pch_udc_dev *dev,
 					  int is_active)
 {
-	if (is_active)
-		pch_udc_clear_disconnect(dev);
-	else
+	if (is_active) {
+		pch_udc_reconnect(dev);
+		dev->vbus_session = 1;
+	} else {
+		if (dev->driver && dev->driver->disconnect) {
+			spin_unlock(&dev->lock);
+			dev->driver->disconnect(&dev->gadget);
+			spin_lock(&dev->lock);
+		}
 		pch_udc_set_disconnect(dev);
+		dev->vbus_session = 0;
+	}
 }
 
 /**
@@ -1134,7 +1168,17 @@ static int pch_udc_pcd_pullup(struct usb_gadget *gadget, int is_on)
 	if (!gadget)
 		return -EINVAL;
 	dev = container_of(gadget, struct pch_udc_dev, gadget);
-	pch_udc_vbus_session(dev, is_on);
+	if (is_on) {
+		pch_udc_reconnect(dev);
+	} else {
+		if (dev->driver && dev->driver->disconnect) {
+			spin_unlock(&dev->lock);
+			dev->driver->disconnect(&dev->gadget);
+			spin_lock(&dev->lock);
+		}
+		pch_udc_set_disconnect(dev);
+	}
+
 	return 0;
 }
 
@@ -2338,8 +2382,11 @@ static void pch_udc_svc_ur_interrupt(struct pch_udc_dev *dev)
 		/* Complete request queue */
 		empty_req_queue(ep);
 	}
-	if (dev->driver && dev->driver->disconnect)
+	if (dev->driver && dev->driver->disconnect) {
+		spin_unlock(&dev->lock);
 		dev->driver->disconnect(&dev->gadget);
+		spin_lock(&dev->lock);
+	}
 }
 
 /**
@@ -2374,6 +2421,11 @@ static void pch_udc_svc_enum_interrupt(struct pch_udc_dev *dev)
 	pch_udc_set_dma(dev, DMA_DIR_TX);
 	pch_udc_set_dma(dev, DMA_DIR_RX);
 	pch_udc_ep_set_rrdy(&(dev->ep[UDC_EP0OUT_IDX]));
+
+	/* enable device interrupts */
+	pch_udc_enable_interrupts(dev, UDC_DEVINT_UR | UDC_DEVINT_US |
+					UDC_DEVINT_ES | UDC_DEVINT_ENUM |
+					UDC_DEVINT_SI | UDC_DEVINT_SC);
 }
 
 /**
@@ -2475,8 +2527,24 @@ static void pch_udc_dev_isr(struct pch_udc_dev *dev, u32 dev_intr)
 	if (dev_intr & UDC_DEVINT_SC)
 		pch_udc_svc_cfg_interrupt(dev);
 	/* USB Suspend interrupt */
-	if (dev_intr & UDC_DEVINT_US)
+	if (dev_intr & UDC_DEVINT_US) {
+		if (dev->driver
+			&& dev->driver->suspend) {
+			spin_unlock(&dev->lock);
+			dev->driver->suspend(&dev->gadget);
+			spin_lock(&dev->lock);
+		}
+
+		if (dev->vbus_session == 0) {
+			if (dev->driver && dev->driver->disconnect) {
+				spin_unlock(&dev->lock);
+				dev->driver->disconnect(&dev->gadget);
+				spin_lock(&dev->lock);
+			}
+			pch_udc_reconnect(dev);
+		}
 		dev_dbg(&dev->pdev->dev, "USB_SUSPEND\n");
+	}
 	/* Clear the SOF interrupt, if enabled */
 	if (dev_intr & UDC_DEVINT_SOF)
 		dev_dbg(&dev->pdev->dev, "SOF\n");
@@ -2502,6 +2570,14 @@ static irqreturn_t pch_udc_isr(int irq, void *pdev)
 	dev_intr = pch_udc_read_device_interrupts(dev);
 	ep_intr = pch_udc_read_ep_interrupts(dev);
 
+	/* For a hot plug, this find that the controller is hung up. */
+	if (dev_intr == ep_intr)
+		if (dev_intr == pch_udc_readl(dev, UDC_DEVCFG_ADDR)) {
+			dev_dbg(&dev->pdev->dev, "UDC: Hung up\n");
+			/* The controller is reset */
+			pch_udc_writel(dev, UDC_SRST, UDC_SRST_ADDR);
+			return IRQ_HANDLED;
+		}
 	if (dev_intr)
 		/* Clear device interrupts */
 		pch_udc_write_device_interrupts(dev, dev_intr);
@@ -2915,8 +2991,10 @@ static int pch_udc_probe(struct pci_dev *pdev,
 	}
 	pch_udc = dev;
 	/* initialize the hardware */
-	if (pch_udc_pcd_init(dev))
+	if (pch_udc_pcd_init(dev)) {
+		retval = -ENODEV;
 		goto finished;
+	}
 	if (request_irq(pdev->irq, pch_udc_isr, IRQF_SHARED, KBUILD_MODNAME,
 			dev)) {
 		dev_err(&pdev->dev, "%s: request_irq(%d) fail\n", __func__,
@@ -2971,6 +3049,11 @@ static DEFINE_PCI_DEVICE_TABLE(pch_udc_pcidev_id) = {
 		.class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
 		.class_mask = 0xffffffff,
 	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7831_IOH_UDC),
+		.class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
+		.class_mask = 0xffffffff,
+	},
 	{ 0 },
 };
 
diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h
index 5b79194..01a23c1 100644
--- a/drivers/usb/gadget/uvc.h
+++ b/drivers/usb/gadget/uvc.h
@@ -29,7 +29,7 @@
 
 struct uvc_request_data
 {
-	unsigned int length;
+	__s32 length;
 	__u8 data[60];
 };
 
diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c
index 5e807f0..992f66b 100644
--- a/drivers/usb/gadget/uvc_v4l2.c
+++ b/drivers/usb/gadget/uvc_v4l2.c
@@ -41,7 +41,7 @@ uvc_send_response(struct uvc_device *uvc, struct uvc_request_data *data)
 	if (data->length < 0)
 		return usb_ep_set_halt(cdev->gadget->ep0);
 
-	req->length = min(uvc->event_length, data->length);
+	req->length = min_t(unsigned int, uvc->event_length, data->length);
 	req->zero = data->length < uvc->event_length;
 	req->dma = DMA_ADDR_INVALID;
 
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index f380bf9..fc93d57 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -125,7 +125,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
 	 */
 	if (pdata->init && pdata->init(pdev)) {
 		retval = -ENODEV;
-		goto err3;
+		goto err4;
 	}
 
 	/* Enable USB controller, 83xx or 8536 */
@@ -216,6 +216,8 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,
 			       unsigned int port_offset)
 {
 	u32 portsc;
+	struct usb_hcd *hcd = ehci_to_hcd(ehci);
+	void __iomem *non_ehci = hcd->regs;
 
 	portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
 	portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);
@@ -231,6 +233,8 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,
 		portsc |= PORT_PTS_PTW;
 		/* fall through */
 	case FSL_USB2_PHY_UTMI:
+		/* enable UTMI PHY */
+		setbits32(non_ehci + FSL_SOC_USB_CTRL, CTRL_UTMI_PHY_EN);
 		portsc |= PORT_PTS_UTMI;
 		break;
 	case FSL_USB2_PHY_NONE:
diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h
index 4918062..bea5013 100644
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -45,5 +45,6 @@
 #define FSL_SOC_USB_PRICTRL	0x40c	/* NOTE: big-endian */
 #define FSL_SOC_USB_SICTRL	0x410	/* NOTE: big-endian */
 #define FSL_SOC_USB_CTRL	0x500	/* NOTE: big-endian */
+#define CTRL_UTMI_PHY_EN	(1<<9)
 #define SNOOP_SIZE_2GB		0x1e
 #endif				/* _EHCI_FSL_H */
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index ac0377f..50bb6e0 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -808,8 +808,13 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 		goto dead;
 	}
 
+	/*
+	 * We don't use STS_FLR, but some controllers don't like it to
+	 * remain on, so mask it out along with the other status bits.
+	 */
+	masked_status = status & (INTR_MASK | STS_FLR);
+
 	/* Shared IRQ? */
-	masked_status = status & INTR_MASK;
 	if (!masked_status || unlikely(hcd->state == HC_STATE_HALT)) {
 		spin_unlock(&ehci->lock);
 		return IRQ_NONE;
@@ -860,7 +865,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 		pcd_status = status;
 
 		/* resume root hub? */
-		if (!(cmd & CMD_RUN))
+		if (hcd->state == HC_STATE_SUSPENDED)
 			usb_hcd_resume_root_hub(hcd);
 
 		/* get per-port change detect bits */
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 1d1caa6..3940d28 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -144,6 +144,14 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 			hcd->has_tt = 1;
 			tdi_reset(ehci);
 		}
+		if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) {
+			/* EHCI #1 or #2 on 6 Series/C200 Series chipset */
+			if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) {
+				ehci_info(ehci, "broken D3 during system sleep on ASUS\n");
+				hcd->broken_pci_sleep = 1;
+				device_set_wakeup_capable(&pdev->dev, false);
+			}
+		}
 		break;
 	case PCI_VENDOR_ID_TDI:
 		if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index e4cc485..5aa7cec 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -656,7 +656,7 @@ qh_urb_transaction (
 	/*
 	 * data transfer stage:  buffer setup
 	 */
-	i = urb->num_sgs;
+	i = urb->num_mapped_sgs;
 	if (len > 0 && i > 0) {
 		sg = urb->sg;
 		buf = sg_dma_address(sg);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index f428987..141febd 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -389,17 +389,14 @@ ohci_shutdown (struct usb_hcd *hcd)
 	struct ohci_hcd *ohci;
 
 	ohci = hcd_to_ohci (hcd);
-	ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
-	ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
+	ohci_writel(ohci, (u32) ~0, &ohci->regs->intrdisable);
 
-	/* If the SHUTDOWN quirk is set, don't put the controller in RESET */
-	ohci->hc_control &= (ohci->flags & OHCI_QUIRK_SHUTDOWN ?
-			OHCI_CTRL_RWC | OHCI_CTRL_HCFS :
-			OHCI_CTRL_RWC);
-	ohci_writel(ohci, ohci->hc_control, &ohci->regs->control);
+	/* Software reset, after which the controller goes into SUSPEND */
+	ohci_writel(ohci, OHCI_HCR, &ohci->regs->cmdstatus);
+	ohci_readl(ohci, &ohci->regs->cmdstatus);	/* flush the writes */
+	udelay(10);
 
-	/* flush the writes */
-	(void) ohci_readl (ohci, &ohci->regs->control);
+	ohci_writel(ohci, ohci->fminterval, &ohci->regs->fminterval);
 }
 
 static int check_ed(struct ohci_hcd *ohci, struct ed *ed)
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index ad8166c..bc01b06 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -175,28 +175,6 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd)
 	return 0;
 }
 
-/* nVidia controllers continue to drive Reset signalling on the bus
- * even after system shutdown, wasting power.  This flag tells the
- * shutdown routine to leave the controller OPERATIONAL instead of RESET.
- */
-static int ohci_quirk_nvidia_shutdown(struct usb_hcd *hcd)
-{
-	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
-	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
-
-	/* Evidently nVidia fixed their later hardware; this is a guess at
-	 * the changeover point.
-	 */
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB		0x026d
-
-	if (pdev->device < PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB) {
-		ohci->flags |= OHCI_QUIRK_SHUTDOWN;
-		ohci_dbg(ohci, "enabled nVidia shutdown quirk\n");
-	}
-
-	return 0;
-}
-
 static void sb800_prefetch(struct ohci_hcd *ohci, int on)
 {
 	struct pci_dev *pdev;
@@ -260,10 +238,6 @@ static const struct pci_device_id ohci_pci_quirks[] = {
 		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399),
 		.driver_data = (unsigned long)ohci_quirk_amd700,
 	},
-	{
-		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID),
-		.driver_data = (unsigned long) ohci_quirk_nvidia_shutdown,
-	},
 
 	/* FIXME for some of the early AMD 760 southbridges, OHCI
 	 * won't work at all.  blacklist them.
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index 35e5fd6..0795b93 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -403,7 +403,6 @@ struct ohci_hcd {
 #define	OHCI_QUIRK_HUB_POWER	0x100			/* distrust firmware power/oc setup */
 #define	OHCI_QUIRK_AMD_PLL	0x200			/* AMD PLL quirk*/
 #define	OHCI_QUIRK_AMD_PREFETCH	0x400			/* pre-fetch for ISO transfer */
-#define	OHCI_QUIRK_SHUTDOWN	0x800			/* nVidia power bug */
 	// there are also chip quirks/bugs in init logic
 
 	struct work_struct	nec_work;	/* Worker for NEC quirk */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index a495d48..7fec8bd 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -36,6 +36,7 @@
 #define OHCI_INTRENABLE		0x10
 #define OHCI_INTRDISABLE	0x14
 #define OHCI_FMINTERVAL		0x34
+#define OHCI_HCFS		(3 << 6)	/* hc functional state */
 #define OHCI_HCR		(1 << 0)	/* host controller reset */
 #define OHCI_OCR		(1 << 3)	/* ownership change request */
 #define OHCI_CTRL_RWC		(1 << 9)	/* remote wakeup connected */
@@ -465,6 +466,8 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
 {
 	void __iomem *base;
 	u32 control;
+	u32 fminterval;
+	int cnt;
 
 	if (!mmio_resource_enabled(pdev, 0))
 		return;
@@ -497,41 +500,32 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
 	}
 #endif
 
-	/* reset controller, preserving RWC (and possibly IR) */
-	writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL);
-	readl(base + OHCI_CONTROL);
+	/* disable interrupts */
+	writel((u32) ~0, base + OHCI_INTRDISABLE);
 
-	/* Some NVIDIA controllers stop working if kept in RESET for too long */
-	if (pdev->vendor == PCI_VENDOR_ID_NVIDIA) {
-		u32 fminterval;
-		int cnt;
+	/* Reset the USB bus, if the controller isn't already in RESET */
+	if (control & OHCI_HCFS) {
+		/* Go into RESET, preserving RWC (and possibly IR) */
+		writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL);
+		readl(base + OHCI_CONTROL);
 
-		/* drive reset for at least 50 ms (7.1.7.5) */
+		/* drive bus reset for at least 50 ms (7.1.7.5) */
 		msleep(50);
+	}
 
-		/* software reset of the controller, preserving HcFmInterval */
-		fminterval = readl(base + OHCI_FMINTERVAL);
-		writel(OHCI_HCR, base + OHCI_CMDSTATUS);
-
-		/* reset requires max 10 us delay */
-		for (cnt = 30; cnt > 0; --cnt) {	/* ... allow extra time */
-			if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0)
-				break;
-			udelay(1);
-		}
-		writel(fminterval, base + OHCI_FMINTERVAL);
+	/* software reset of the controller, preserving HcFmInterval */
+	fminterval = readl(base + OHCI_FMINTERVAL);
+	writel(OHCI_HCR, base + OHCI_CMDSTATUS);
 
-		/* Now we're in the SUSPEND state with all devices reset
-		 * and wakeups and interrupts disabled
-		 */
+	/* reset requires max 10 us delay */
+	for (cnt = 30; cnt > 0; --cnt) {	/* ... allow extra time */
+		if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0)
+			break;
+		udelay(1);
 	}
+	writel(fminterval, base + OHCI_FMINTERVAL);
 
-	/*
-	 * disable interrupts
-	 */
-	writel(~(u32)0, base + OHCI_INTRDISABLE);
-	writel(~(u32)0, base + OHCI_INTRSTATUS);
-
+	/* Now the controller is safely in SUSPEND and nothing can wake it up */
 	iounmap(base);
 }
 
@@ -830,9 +824,13 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
 		}
 	}
 
-	/* Disable any BIOS SMIs */
-	writel(XHCI_LEGACY_DISABLE_SMI,
-			base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+	val = readl(base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+	/* Mask off (turn off) any enabled SMIs */
+	val &= XHCI_LEGACY_DISABLE_SMI;
+	/* Mask all SMI events bits, RW1C */
+	val |= XHCI_LEGACY_SMI_EVENTS;
+	/* Disable any BIOS SMIs and clear all SMI events*/
+	writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
 
 	if (usb_is_intel_switchable_xhci(pdev))
 		usb_enable_xhci_ports(pdev);
@@ -872,6 +870,22 @@ hc_init:
 
 static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
 {
+	/* Skip Netlogic mips SoC's internal PCI USB controller.
+	 * This device does not need/support EHCI/OHCI handoff
+	 */
+	if (pdev->vendor == 0x184e)	/* vendor Netlogic */
+		return;
+	if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI &&
+			pdev->class != PCI_CLASS_SERIAL_USB_OHCI &&
+			pdev->class != PCI_CLASS_SERIAL_USB_EHCI &&
+			pdev->class != PCI_CLASS_SERIAL_USB_XHCI)
+		return;
+
+	if (pci_enable_device(pdev) < 0) {
+		dev_warn(&pdev->dev, "Can't enable PCI device, "
+				"BIOS handoff failed.\n");
+		return;
+	}
 	if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
 		quirk_usb_handoff_uhci(pdev);
 	else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
@@ -880,5 +894,6 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
 		quirk_usb_disable_ehci(pdev);
 	else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
 		quirk_usb_handoff_xhci(pdev);
+	pci_disable_device(pdev);
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 84ed28b..8253991 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -943,7 +943,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb,
 	if (usb_pipein(urb->pipe))
 		status |= TD_CTRL_SPD;
 
-	i = urb->num_sgs;
+	i = urb->num_mapped_sgs;
 	if (len > 0 && i > 0) {
 		sg = urb->sg;
 		data = sg_dma_address(sg);
diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
index a403b53..76083ae 100644
--- a/drivers/usb/host/whci/qset.c
+++ b/drivers/usb/host/whci/qset.c
@@ -443,7 +443,7 @@ static int qset_add_urb_sg(struct whc *whc, struct whc_qset *qset, struct urb *u
 
 	remaining = urb->transfer_buffer_length;
 
-	for_each_sg(urb->sg, sg, urb->num_sgs, i) {
+	for_each_sg(urb->sg, sg, urb->num_mapped_sgs, i) {
 		dma_addr_t dma_addr;
 		size_t dma_remaining;
 		dma_addr_t sp, ep;
@@ -561,7 +561,7 @@ static int qset_add_urb_sg_linearize(struct whc *whc, struct whc_qset *qset,
 
 	remaining = urb->transfer_buffer_length;
 
-	for_each_sg(urb->sg, sg, urb->num_sgs, i) {
+	for_each_sg(urb->sg, sg, urb->num_mapped_sgs, i) {
 		size_t len;
 		size_t sg_remaining;
 		void *orig;
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
index ce5c9e5..4206f6b 100644
--- a/drivers/usb/host/xhci-ext-caps.h
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -62,8 +62,9 @@
 /* USB Legacy Support Control and Status Register  - section 7.1.2 */
 /* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
 #define XHCI_LEGACY_CONTROL_OFFSET	(0x04)
-/* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
-#define	XHCI_LEGACY_DISABLE_SMI		((0x3 << 1) + (0xff << 5) + (0x7 << 17))
+/* bits 1:3, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
+#define	XHCI_LEGACY_DISABLE_SMI		((0x7 << 1) + (0xff << 5) + (0x7 << 17))
+#define XHCI_LEGACY_SMI_EVENTS		(0x7 << 29)
 
 /* command register values to disable interrupts and halt the HC */
 /* start/stop HC execution - do not write unless HC is halted*/
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index ce9f974..7520ebb 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -75,7 +75,7 @@ static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
 	 */
 	memset(port_removable, 0, sizeof(port_removable));
 	for (i = 0; i < ports; i++) {
-		portsc = xhci_readl(xhci, xhci->usb3_ports[i]);
+		portsc = xhci_readl(xhci, xhci->usb2_ports[i]);
 		/* If a device is removable, PORTSC reports a 0, same as in the
 		 * hub descriptor DeviceRemovable bits.
 		 */
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 61a0cf3..d64f2b5 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1002,26 +1002,42 @@ static unsigned int xhci_parse_exponent_interval(struct usb_device *udev,
 }
 
 /*
- * Convert bInterval expressed in frames (in 1-255 range) to exponent of
+ * Convert bInterval expressed in microframes (in 1-255 range) to exponent of
  * microframes, rounded down to nearest power of 2.
  */
-static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
-		struct usb_host_endpoint *ep)
+static unsigned int xhci_microframes_to_exponent(struct usb_device *udev,
+		struct usb_host_endpoint *ep, unsigned int desc_interval,
+		unsigned int min_exponent, unsigned int max_exponent)
 {
 	unsigned int interval;
 
-	interval = fls(8 * ep->desc.bInterval) - 1;
-	interval = clamp_val(interval, 3, 10);
-	if ((1 << interval) != 8 * ep->desc.bInterval)
+	interval = fls(desc_interval) - 1;
+	interval = clamp_val(interval, min_exponent, max_exponent);
+	if ((1 << interval) != desc_interval)
 		dev_warn(&udev->dev,
 			 "ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n",
 			 ep->desc.bEndpointAddress,
 			 1 << interval,
-			 8 * ep->desc.bInterval);
+			 desc_interval);
 
 	return interval;
 }
 
+static unsigned int xhci_parse_microframe_interval(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	return xhci_microframes_to_exponent(udev, ep,
+			ep->desc.bInterval, 0, 15);
+}
+
+
+static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	return xhci_microframes_to_exponent(udev, ep,
+			ep->desc.bInterval * 8, 3, 10);
+}
+
 /* Return the polling or NAK interval.
  *
  * The polling interval is expressed in "microframes".  If xHCI's Interval field
@@ -1040,7 +1056,7 @@ static unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
 		/* Max NAK rate */
 		if (usb_endpoint_xfer_control(&ep->desc) ||
 		    usb_endpoint_xfer_bulk(&ep->desc)) {
-			interval = ep->desc.bInterval;
+			interval = xhci_parse_microframe_interval(udev, ep);
 			break;
 		}
 		/* Fall through - SS and HS isoc/int have same decoding */
@@ -1492,11 +1508,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	int i;
 
 	/* Free the Event Ring Segment Table and the actual Event Ring */
-	if (xhci->ir_set) {
-		xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
-		xhci_write_64(xhci, 0, &xhci->ir_set->erst_base);
-		xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue);
-	}
 	size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
 	if (xhci->erst.entries)
 		dma_free_coherent(&pdev->dev, size,
@@ -1508,7 +1519,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	xhci->event_ring = NULL;
 	xhci_dbg(xhci, "Freed event ring\n");
 
-	xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring);
 	if (xhci->cmd_ring)
 		xhci_ring_free(xhci, xhci->cmd_ring);
 	xhci->cmd_ring = NULL;
@@ -1537,7 +1547,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	xhci->medium_streams_pool = NULL;
 	xhci_dbg(xhci, "Freed medium stream array pool\n");
 
-	xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr);
 	if (xhci->dcbaa)
 		dma_free_coherent(&pdev->dev, sizeof(*xhci->dcbaa),
 				xhci->dcbaa, xhci->dcbaa->dma);
@@ -2107,6 +2116,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 
 fail:
 	xhci_warn(xhci, "Couldn't initialize memory\n");
+	xhci_halt(xhci);
+	xhci_reset(xhci);
 	xhci_mem_cleanup(xhci);
 	return -ENOMEM;
 }
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index dc78c63..8adc7aa 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -93,6 +93,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
 		xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
 	}
+	if (pdev->vendor == PCI_VENDOR_ID_VIA)
+		xhci->quirks |= XHCI_RESET_ON_RESUME;
 }
 
 /* called during probe() after chip reset completes */
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 9615b80..114aade 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1218,6 +1218,7 @@ static void handle_vendor_event(struct xhci_hcd *xhci,
  *
  * Returns a zero-based port number, which is suitable for indexing into each of
  * the split roothubs' port arrays and bus state arrays.
+ * Add one to it in order to call xhci_find_slot_id_by_port.
  */
 static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd,
 		struct xhci_hcd *xhci, u32 port_id)
@@ -1340,7 +1341,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
 			temp |= PORT_LINK_STROBE | XDEV_U0;
 			xhci_writel(xhci, temp, port_array[faked_port_index]);
 			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-					faked_port_index);
+					faked_port_index + 1);
 			if (!slot_id) {
 				xhci_dbg(xhci, "slot_id is zero\n");
 				goto cleanup;
@@ -2350,7 +2351,7 @@ hw_died:
 		u32 irq_pending;
 		/* Acknowledge the PCI interrupt */
 		irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
-		irq_pending |= 0x3;
+		irq_pending |= IMAN_IP;
 		xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending);
 	}
 
@@ -2569,7 +2570,7 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb)
 	struct scatterlist *sg;
 
 	sg = NULL;
-	num_sgs = urb->num_sgs;
+	num_sgs = urb->num_mapped_sgs;
 	temp = urb->transfer_buffer_length;
 
 	xhci_dbg(xhci, "count sg list trbs: \n");
@@ -2753,7 +2754,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		return -EINVAL;
 
 	num_trbs = count_sg_trbs_needed(xhci, urb);
-	num_sgs = urb->num_sgs;
+	num_sgs = urb->num_mapped_sgs;
 	total_packet_count = roundup(urb->transfer_buffer_length,
 			le16_to_cpu(urb->ep->desc.wMaxPacketSize));
 
@@ -3380,7 +3381,8 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		/* Check TD length */
 		if (running_total != td_len) {
 			xhci_err(xhci, "ISOC TD length unmatch\n");
-			return -EINVAL;
+			ret = -EINVAL;
+			goto cleanup;
 		}
 	}
 
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 7605e46..66b6d8a 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -507,7 +507,26 @@ int xhci_run(struct usb_hcd *hcd)
 
 	ret = xhci_try_enable_msi(hcd);
 	if (ret)
-		return ret;
+		/* fall back to msi*/
+		ret = xhci_setup_msi(xhci);
+
+	if (ret) {
+legacy_irq:
+		if (!pdev->irq) {
+			xhci_err(xhci, "No msi-x/msi found and "
+					"no IRQ in BIOS\n");
+			return -EINVAL;
+		}
+		/* fall back to legacy interrupt*/
+		ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
+					hcd->irq_descr, hcd);
+		if (ret) {
+			xhci_err(xhci, "request interrupt %d failed\n",
+					pdev->irq);
+			return ret;
+		}
+		hcd->irq = pdev->irq;
+	}
 
 #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
 	init_timer(&xhci->event_ring_timer);
@@ -659,11 +678,11 @@ static void xhci_save_registers(struct xhci_hcd *xhci)
 	xhci->s3.dev_nt = xhci_readl(xhci, &xhci->op_regs->dev_notification);
 	xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
 	xhci->s3.config_reg = xhci_readl(xhci, &xhci->op_regs->config_reg);
-	xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
-	xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control);
 	xhci->s3.erst_size = xhci_readl(xhci, &xhci->ir_set->erst_size);
 	xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base);
 	xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+	xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+	xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control);
 }
 
 static void xhci_restore_registers(struct xhci_hcd *xhci)
@@ -672,10 +691,11 @@ static void xhci_restore_registers(struct xhci_hcd *xhci)
 	xhci_writel(xhci, xhci->s3.dev_nt, &xhci->op_regs->dev_notification);
 	xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr);
 	xhci_writel(xhci, xhci->s3.config_reg, &xhci->op_regs->config_reg);
-	xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending);
-	xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control);
 	xhci_writel(xhci, xhci->s3.erst_size, &xhci->ir_set->erst_size);
 	xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base);
+	xhci_write_64(xhci, xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue);
+	xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending);
+	xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control);
 }
 
 static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci)
@@ -1618,6 +1638,7 @@ static int xhci_configure_endpoint_result(struct xhci_hcd *xhci,
 		/* FIXME: can we allocate more resources for the HC? */
 		break;
 	case COMP_BW_ERR:
+	case COMP_2ND_BW_ERR:
 		dev_warn(&udev->dev, "Not enough bandwidth "
 				"for new device state.\n");
 		ret = -ENOSPC;
@@ -2233,8 +2254,7 @@ static int xhci_calculate_streams_and_bitmask(struct xhci_hcd *xhci,
 		if (ret < 0)
 			return ret;
 
-		max_streams = USB_SS_MAX_STREAMS(
-				eps[i]->ss_ep_comp.bmAttributes);
+		max_streams = usb_ss_max_streams(&eps[i]->ss_ep_comp);
 		if (max_streams < (*num_streams - 1)) {
 			xhci_dbg(xhci, "Ep 0x%x only supports %u stream IDs.\n",
 					eps[i]->desc.bEndpointAddress,
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 3bd0d41..3522f1b 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -205,6 +205,10 @@ struct xhci_op_regs {
 #define CMD_PM_INDEX	(1 << 11)
 /* bits 12:31 are reserved (and should be preserved on writes). */
 
+/* IMAN - Interrupt Management Register */
+#define IMAN_IP		(1 << 1)
+#define IMAN_IE		(1 << 0)
+
 /* USBSTS - USB status - status bitmasks */
 /* HC not running - set to 1 when run/stop bit is cleared. */
 #define STS_HALT	XHCI_STS_HALT
@@ -900,7 +904,6 @@ struct xhci_transfer_event {
 /* Invalid Stream ID Error */
 #define COMP_STRID_ERR	34
 /* Secondary Bandwidth Error - may be returned by a Configure Endpoint cmd */
-/* FIXME - check for this */
 #define COMP_2ND_BW_ERR	35
 /* Split Transaction Error */
 #define	COMP_SPLIT_ERR	36
diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c
index fe1d443..8f725f6 100644
--- a/drivers/usb/misc/isight_firmware.c
+++ b/drivers/usb/misc/isight_firmware.c
@@ -55,8 +55,9 @@ static int isight_firmware_load(struct usb_interface *intf,
 
 	ptr = firmware->data;
 
+	buf[0] = 0x01;
 	if (usb_control_msg
-	    (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\1", 1,
+	    (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, buf, 1,
 	     300) != 1) {
 		printk(KERN_ERR
 		       "Failed to initialise isight firmware loader\n");
@@ -100,8 +101,9 @@ static int isight_firmware_load(struct usb_interface *intf,
 		}
 	}
 
+	buf[0] = 0x00;
 	if (usb_control_msg
-	    (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\0", 1,
+	    (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, buf, 1,
 	     300) != 1) {
 		printk(KERN_ERR "isight firmware loading completion failed\n");
 		ret = -ENODEV;
diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c
index 417b8f2..59689fa 100644
--- a/drivers/usb/misc/usbsevseg.c
+++ b/drivers/usb/misc/usbsevseg.c
@@ -24,7 +24,7 @@
 
 #define VENDOR_ID	0x0fc5
 #define PRODUCT_ID	0x1227
-#define MAXLEN		6
+#define MAXLEN		8
 
 /* table of devices that work with this driver */
 static const struct usb_device_id id_table[] = {
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
index ac5bfd6..2504694 100644
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -99,9 +99,7 @@ static void yurex_delete(struct kref *kref)
 	usb_put_dev(dev->udev);
 	if (dev->cntl_urb) {
 		usb_kill_urb(dev->cntl_urb);
-		if (dev->cntl_req)
-			usb_free_coherent(dev->udev, YUREX_BUF_SIZE,
-				dev->cntl_req, dev->cntl_urb->setup_dma);
+		kfree(dev->cntl_req);
 		if (dev->cntl_buffer)
 			usb_free_coherent(dev->udev, YUREX_BUF_SIZE,
 				dev->cntl_buffer, dev->cntl_urb->transfer_dma);
@@ -234,9 +232,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_
 	}
 
 	/* allocate buffer for control req */
-	dev->cntl_req = usb_alloc_coherent(dev->udev, YUREX_BUF_SIZE,
-					   GFP_KERNEL,
-					   &dev->cntl_urb->setup_dma);
+	dev->cntl_req = kmalloc(YUREX_BUF_SIZE, GFP_KERNEL);
 	if (!dev->cntl_req) {
 		err("Could not allocate cntl_req");
 		goto error;
@@ -286,7 +282,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_
 			 usb_rcvintpipe(dev->udev, dev->int_in_endpointAddr),
 			 dev->int_buffer, YUREX_BUF_SIZE, yurex_interrupt,
 			 dev, 1);
-	dev->cntl_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+	dev->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 	if (usb_submit_urb(dev->urb, GFP_KERNEL)) {
 		retval = -EIO;
 		err("Could not submitting URB");
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index dce7182..a0232a7 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2078,8 +2078,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	if (status < 0)
 		goto fail3;
 
-	pm_runtime_put(musb->controller);
-
 	status = musb_init_debugfs(musb);
 	if (status < 0)
 		goto fail4;
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 548338c..99ceaef 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -576,6 +576,15 @@ void musb_g_tx(struct musb *musb, u8 epnum)
 
 		if (request->actual == request->length) {
 			musb_g_giveback(musb_ep, request, 0);
+			/*
+			 * In the giveback function the MUSB lock is
+			 * released and acquired after sometime. During
+			 * this time period the INDEX register could get
+			 * changed by the gadget_queue function especially
+			 * on SMP systems. Reselect the INDEX to be sure
+			 * we are reading/modifying the right registers
+			 */
+			musb_ep_select(mbase, epnum);
 			req = musb_ep->desc ? next_request(musb_ep) : NULL;
 			if (!req) {
 				dev_dbg(musb->controller, "%s idle now\n",
@@ -968,6 +977,15 @@ void musb_g_rx(struct musb *musb, u8 epnum)
 		}
 #endif
 		musb_g_giveback(musb_ep, request, 0);
+		/*
+		 * In the giveback function the MUSB lock is
+		 * released and acquired after sometime. During
+		 * this time period the INDEX register could get
+		 * changed by the gadget_queue function especially
+		 * on SMP systems. Reselect the INDEX to be sure
+		 * we are reading/modifying the right registers
+		 */
+		musb_ep_select(mbase, epnum);
 
 		req = next_request(musb_ep);
 		if (!req)
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index c5d4c44..6958ab9 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -295,7 +295,8 @@ static int musb_otg_notifications(struct notifier_block *nb,
 
 static int omap2430_musb_init(struct musb *musb)
 {
-	u32 l, status = 0;
+	u32 l;
+	int status = 0;
 	struct device *dev = musb->controller;
 	struct musb_hdrc_platform_data *plat = dev->platform_data;
 	struct omap_musb_board_data *data = plat->board_data;
@@ -312,7 +313,7 @@ static int omap2430_musb_init(struct musb *musb)
 
 	status = pm_runtime_get_sync(dev);
 	if (status < 0) {
-		dev_err(dev, "pm_runtime_get_sync FAILED");
+		dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status);
 		goto err1;
 	}
 
@@ -464,14 +465,14 @@ static int __init omap2430_probe(struct platform_device *pdev)
 		goto err2;
 	}
 
+	pm_runtime_enable(&pdev->dev);
+
 	ret = platform_device_add(musb);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register musb device\n");
 		goto err2;
 	}
 
-	pm_runtime_enable(&pdev->dev);
-
 	return 0;
 
 err2:
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index fd67cc5..f2c57e0 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -39,6 +39,8 @@ static void cp210x_get_termios(struct tty_struct *,
 	struct usb_serial_port *port);
 static void cp210x_get_termios_port(struct usb_serial_port *port,
 	unsigned int *cflagp, unsigned int *baudp);
+static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *,
+							struct ktermios *);
 static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
 							struct ktermios*);
 static int cp210x_tiocmget(struct tty_struct *);
@@ -47,6 +49,7 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port,
 		unsigned int, unsigned int);
 static void cp210x_break_ctl(struct tty_struct *, int);
 static int cp210x_startup(struct usb_serial *);
+static void cp210x_release(struct usb_serial *);
 static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
 
 static int debug;
@@ -92,6 +95,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
 	{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
 	{ USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
+	{ USB_DEVICE(0x10C4, 0x81A9) }, /* Multiplex RC Interface */
 	{ USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
 	{ USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */
 	{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
@@ -118,6 +122,8 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
+	{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
+	{ USB_DEVICE(0x10C4, 0xEA80) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
 	{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
 	{ USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
@@ -133,16 +139,23 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
 	{ USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
 	{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
+	{ USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
+	{ USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
 	{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
 	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
 	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+	{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
 	{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
 	{ } /* Terminating Entry */
 };
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
+struct cp210x_port_private {
+	__u8			bInterfaceNumber;
+};
+
 static struct usb_driver cp210x_driver = {
 	.name		= "cp210x",
 	.probe		= usb_serial_probe,
@@ -168,6 +181,7 @@ static struct usb_serial_driver cp210x_device = {
 	.tiocmget 		= cp210x_tiocmget,
 	.tiocmset		= cp210x_tiocmset,
 	.attach			= cp210x_startup,
+	.release		= cp210x_release,
 	.dtr_rts		= cp210x_dtr_rts
 };
 
@@ -200,6 +214,8 @@ static struct usb_serial_driver cp210x_device = {
 #define CP210X_EMBED_EVENTS	0x15
 #define CP210X_GET_EVENTSTATE	0x16
 #define CP210X_SET_CHARS	0x19
+#define CP210X_GET_BAUDRATE	0x1D
+#define CP210X_SET_BAUDRATE	0x1E
 
 /* CP210X_IFC_ENABLE */
 #define UART_ENABLE		0x0001
@@ -253,6 +269,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request,
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 	__le32 *buf;
 	int result, i, length;
 
@@ -268,7 +285,8 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request,
 	/* Issue the request, attempting to read 'size' bytes */
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 				request, REQTYPE_DEVICE_TO_HOST, 0x0000,
-				0, buf, size, 300);
+				port_priv->bInterfaceNumber, buf, size,
+				USB_CTRL_GET_TIMEOUT);
 
 	/* Convert data into an array of integers */
 	for (i = 0; i < length; i++)
@@ -296,6 +314,7 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
 	__le32 *buf;
 	int result, i, length;
 
@@ -317,12 +336,14 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
 		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0),
 				request, REQTYPE_HOST_TO_DEVICE, 0x0000,
-				0, buf, size, 300);
+				port_priv->bInterfaceNumber, buf, size,
+				USB_CTRL_SET_TIMEOUT);
 	} else {
 		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0),
 				request, REQTYPE_HOST_TO_DEVICE, data[0],
-				0, NULL, 0, 300);
+				port_priv->bInterfaceNumber, NULL, 0,
+				USB_CTRL_SET_TIMEOUT);
 	}
 
 	kfree(buf);
@@ -353,8 +374,8 @@ static inline int cp210x_set_config_single(struct usb_serial_port *port,
  * Quantises the baud rate as per AN205 Table 1
  */
 static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
-	if      (baud <= 56)       baud = 0;
-	else if (baud <= 300)      baud = 300;
+	if (baud <= 300)
+		baud = 300;
 	else if (baud <= 600)      baud = 600;
 	else if (baud <= 1200)     baud = 1200;
 	else if (baud <= 1800)     baud = 1800;
@@ -382,17 +403,15 @@ static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
 	else if (baud <= 491520)   baud = 460800;
 	else if (baud <= 567138)   baud = 500000;
 	else if (baud <= 670254)   baud = 576000;
-	else if (baud <= 1053257)  baud = 921600;
-	else if (baud <= 1474560)  baud = 1228800;
-	else if (baud <= 2457600)  baud = 1843200;
-	else                       baud = 3686400;
+	else if (baud < 1000000)
+		baud = 921600;
+	else if (baud > 2000000)
+		baud = 2000000;
 	return baud;
 }
 
 static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
-	int result;
-
 	dbg("%s - port %d", __func__, port->number);
 
 	if (cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE)) {
@@ -401,13 +420,14 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
 		return -EPROTO;
 	}
 
-	result = usb_serial_generic_open(tty, port);
-	if (result)
-		return result;
-
 	/* Configure the termios structure */
 	cp210x_get_termios(tty, port);
-	return 0;
+
+	/* The baud rate must be initialised on cp2104 */
+	if (tty)
+		cp210x_change_speed(tty, port, NULL);
+
+	return usb_serial_generic_open(tty, port);
 }
 
 static void cp210x_close(struct usb_serial_port *port)
@@ -459,10 +479,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2);
-	/* Convert to baudrate */
-	if (baud)
-		baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
+	cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4);
 
 	dbg("%s - baud rate = %d", __func__, baud);
 	*baudp = baud;
@@ -576,11 +593,64 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
 	*cflagp = cflag;
 }
 
+/*
+ * CP2101 supports the following baud rates:
+ *
+ *	300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 14400, 19200, 28800,
+ *	38400, 56000, 57600, 115200, 128000, 230400, 460800, 921600
+ *
+ * CP2102 and CP2103 support the following additional rates:
+ *
+ *	4000, 16000, 51200, 64000, 76800, 153600, 250000, 256000, 500000,
+ *	576000
+ *
+ * The device will map a requested rate to a supported one, but the result
+ * of requests for rates greater than 1053257 is undefined (see AN205).
+ *
+ * CP2104, CP2105 and CP2110 support most rates up to 2M, 921k and 1M baud,
+ * respectively, with an error less than 1%. The actual rates are determined
+ * by
+ *
+ *	div = round(freq / (2 x prescale x request))
+ *	actual = freq / (2 x prescale x div)
+ *
+ * For CP2104 and CP2105 freq is 48Mhz and prescale is 4 for request <= 365bps
+ * or 1 otherwise.
+ * For CP2110 freq is 24Mhz and prescale is 4 for request <= 300bps or 1
+ * otherwise.
+ */
+static void cp210x_change_speed(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
+{
+	u32 baud;
+
+	baud = tty->termios->c_ospeed;
+
+	/* This maps the requested rate to a rate valid on cp2102 or cp2103,
+	 * or to an arbitrary rate in [1M,2M].
+	 *
+	 * NOTE: B0 is not implemented.
+	 */
+	baud = cp210x_quantise_baudrate(baud);
+
+	dbg("%s - setting baud rate to %u", __func__, baud);
+	if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud,
+							sizeof(baud))) {
+		dev_warn(&port->dev, "failed to set baud rate to %u\n", baud);
+		if (old_termios)
+			baud = old_termios->c_ospeed;
+		else
+			baud = 9600;
+	}
+
+	tty_encode_baud_rate(tty, baud, baud);
+}
+
 static void cp210x_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	unsigned int cflag, old_cflag;
-	unsigned int baud = 0, bits;
+	unsigned int bits;
 	unsigned int modem_ctl[4];
 
 	dbg("%s - port %d", __func__, port->number);
@@ -591,20 +661,9 @@ static void cp210x_set_termios(struct tty_struct *tty,
 	tty->termios->c_cflag &= ~CMSPAR;
 	cflag = tty->termios->c_cflag;
 	old_cflag = old_termios->c_cflag;
-	baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty));
-
-	/* If the baud rate is to be updated*/
-	if (baud != tty_termios_baud_rate(old_termios) && baud != 0) {
-		dbg("%s - Setting baud rate to %d baud", __func__,
-				baud);
-		if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV,
-					((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
-			dbg("Baud rate requested not supported by device");
-			baud = tty_termios_baud_rate(old_termios);
-		}
-	}
-	/* Report back the resulting baud rate */
-	tty_encode_baud_rate(tty, baud, baud);
+
+	if (tty->termios->c_ospeed != old_termios->c_ospeed)
+		cp210x_change_speed(tty, port, old_termios);
 
 	/* If the number of data bits is to be updated */
 	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
@@ -784,11 +843,39 @@ static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
 
 static int cp210x_startup(struct usb_serial *serial)
 {
+	struct cp210x_port_private *port_priv;
+	int i;
+
 	/* cp210x buffers behave strangely unless device is reset */
 	usb_reset_device(serial->dev);
+
+	for (i = 0; i < serial->num_ports; i++) {
+		port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
+		if (!port_priv)
+			return -ENOMEM;
+
+		memset(port_priv, 0x00, sizeof(*port_priv));
+		port_priv->bInterfaceNumber =
+		    serial->interface->cur_altsetting->desc.bInterfaceNumber;
+
+		usb_set_serial_port_data(serial->port[i], port_priv);
+	}
+
 	return 0;
 }
 
+static void cp210x_release(struct usb_serial *serial)
+{
+	struct cp210x_port_private *port_priv;
+	int i;
+
+	for (i = 0; i < serial->num_ports; i++) {
+		port_priv = usb_get_serial_port_data(serial->port[i]);
+		kfree(port_priv);
+		usb_set_serial_port_data(serial->port[i], NULL);
+	}
+}
+
 static int __init cp210x_init(void)
 {
 	int retval;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index b02fd50..60d7b1eb 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -187,6 +187,7 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_8u2232c_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_232H_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_FTX_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
@@ -535,6 +536,10 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_6_PID) },
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_7_PID) },
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_1_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_2_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_3_PID) },
+	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_4_PID) },
 	{ USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
 	{ USB_DEVICE(OCT_VID, OCT_US101_PID) },
 	{ USB_DEVICE(OCT_VID, OCT_DK201_PID) },
@@ -796,6 +801,7 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID) },
 	{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
 	{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
@@ -804,6 +810,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
 	{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, TI_XDS100V2_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) },
@@ -835,11 +843,16 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CINTERION_MC55I_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
 	{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
+	{ USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
@@ -862,7 +875,8 @@ static const char *ftdi_chip_name[] = {
 	[FT232RL] = "FT232RL",
 	[FT2232H] = "FT2232H",
 	[FT4232H] = "FT4232H",
-	[FT232H]  = "FT232H"
+	[FT232H]  = "FT232H",
+	[FTX]     = "FT-X"
 };
 
 
@@ -1160,7 +1174,8 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
 		break;
 	case FT232BM: /* FT232BM chip */
 	case FT2232C: /* FT2232C chip */
-	case FT232RL:
+	case FT232RL: /* FT232RL chip */
+	case FTX:     /* FT-X series */
 		if (baud <= 3000000) {
 			__u16 product_id = le16_to_cpu(
 				port->serial->dev->descriptor.idProduct);
@@ -1326,8 +1341,7 @@ static int set_serial_info(struct tty_struct *tty,
 		goto check_and_exit;
 	}
 
-	if ((new_serial.baud_base != priv->baud_base) &&
-	    (new_serial.baud_base < 9600)) {
+	if (new_serial.baud_base != priv->baud_base) {
 		mutex_unlock(&priv->cfg_lock);
 		return -EINVAL;
 	}
@@ -1447,10 +1461,14 @@ static void ftdi_determine_type(struct usb_serial_port *port)
 	} else if (version < 0x900) {
 		/* Assume it's an FT232RL */
 		priv->chip_type = FT232RL;
-	} else {
+	} else if (version < 0x1000) {
 		/* Assume it's an FT232H */
 		priv->chip_type = FT232H;
+	} else {
+		/* Assume it's an FT-X series device */
+		priv->chip_type = FTX;
 	}
+
 	dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]);
 }
 
@@ -1578,7 +1596,8 @@ static int create_sysfs_attrs(struct usb_serial_port *port)
 		     priv->chip_type == FT232RL ||
 		     priv->chip_type == FT2232H ||
 		     priv->chip_type == FT4232H ||
-		     priv->chip_type == FT232H)) {
+		     priv->chip_type == FT232H ||
+		     priv->chip_type == FTX)) {
 			retval = device_create_file(&port->dev,
 						    &dev_attr_latency_timer);
 		}
@@ -1600,7 +1619,8 @@ static void remove_sysfs_attrs(struct usb_serial_port *port)
 		    priv->chip_type == FT232RL ||
 		    priv->chip_type == FT2232H ||
 		    priv->chip_type == FT4232H ||
-                    priv->chip_type == FT232H) {
+		    priv->chip_type == FT232H ||
+		    priv->chip_type == FTX) {
 			device_remove_file(&port->dev, &dev_attr_latency_timer);
 		}
 	}
@@ -1751,7 +1771,8 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial)
 
 	dbg("%s", __func__);
 
-	if (strcmp(udev->manufacturer, "CALAO Systems") == 0)
+	if ((udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) ||
+	    (udev->product && !strcmp(udev->product, "BeagleBone/XDS100")))
 		return ftdi_jtag_probe(serial);
 
 	return 0;
@@ -1816,6 +1837,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
 
 static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
+	struct ktermios dummy;
 	struct usb_device *dev = port->serial->dev;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	int result;
@@ -1834,8 +1856,10 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 	   This is same behaviour as serial.c/rs_open() - Kuba */
 
 	/* ftdi_set_termios  will send usb control messages */
-	if (tty)
-		ftdi_set_termios(tty, port, tty->termios);
+	if (tty) {
+		memset(&dummy, 0, sizeof(dummy));
+		ftdi_set_termios(tty, port, &dummy);
+	}
 
 	/* Start reading from the device */
 	result = usb_serial_generic_open(tty, port);
@@ -2253,6 +2277,7 @@ static int ftdi_tiocmget(struct tty_struct *tty)
 	case FT2232H:
 	case FT4232H:
 	case FT232H:
+	case FTX:
 		len = 2;
 		break;
 	default:
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 19584fa..ed58c6f 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -157,7 +157,8 @@ enum ftdi_chip_type {
 	FT232RL = 5,
 	FT2232H = 6,
 	FT4232H = 7,
-	FT232H  = 8
+	FT232H  = 8,
+	FTX     = 9,
 };
 
 enum ftdi_sio_baudrate {
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 055b64e..c6dd18e 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -23,12 +23,15 @@
 #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
 #define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
 #define FTDI_232H_PID  0x6014 /* Single channel hi-speed device */
+#define FTDI_FTX_PID   0x6015 /* FT-X series (FT201X, FT230X, FT231X, etc) */
 #define FTDI_SIO_PID	0x8372	/* Product Id SIO application of 8U100AX */
 #define FTDI_232RL_PID  0xFBFA  /* Product ID for FT232RL */
 
 
 /*** third-party PIDs (using FTDI_VID) ***/
 
+#define FTDI_LUMEL_PD12_PID	0x6002
+
 /*
  * Marvell OpenRD Base, Client
  * http://www.open-rd.org
@@ -39,6 +42,13 @@
 /* www.candapter.com Ewert Energy Systems CANdapter device */
 #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
 
+/*
+ * Texas Instruments XDS100v2 JTAG / BeagleBone A3
+ * http://processors.wiki.ti.com/index.php/XDS100
+ * http://beagleboard.org/bone
+ */
+#define TI_XDS100V2_PID		0xa6d0
+
 #define FTDI_NXTCAM_PID		0xABB8 /* NXTCam for Mindstorms NXT */
 
 /* US Interface Navigator (http://www.usinterface.com/) */
@@ -90,6 +100,8 @@
 #define FTDI_TACTRIX_OPENPORT_13S_PID	0xCC49	/* OpenPort 1.3 Subaru */
 #define FTDI_TACTRIX_OPENPORT_13U_PID	0xCC4A	/* OpenPort 1.3 Universal */
 
+#define FTDI_DISTORTEC_JTAG_LOCK_PICK_PID	0xCFF8
+
 /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
 /* the VID is the standard ftdi vid (FTDI_VID) */
 #define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */
@@ -525,6 +537,16 @@
 #define ADI_GNICEPLUS_PID	0xF001
 
 /*
+ * Microchip Technology, Inc.
+ *
+ * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are also used by:
+ * Hornby Elite - Digital Command Control Console
+ * http://www.hornby.com/hornby-dcc/controllers/
+ */
+#define MICROCHIP_VID		0x04D8
+#define MICROCHIP_USB_BOARD_PID	0x000A /* CDC RS-232 Emulation Demo */
+
+/*
  * RATOC REX-USB60F
  */
 #define RATOC_VENDOR_ID		0x0584
@@ -667,6 +689,10 @@
 #define SEALEVEL_2803_6_PID	0X2863	/* SeaLINK+8 (2803) Port 6 */
 #define SEALEVEL_2803_7_PID	0X2873	/* SeaLINK+8 (2803) Port 7 */
 #define SEALEVEL_2803_8_PID	0X2883	/* SeaLINK+8 (2803) Port 8 */
+#define SEALEVEL_2803R_1_PID	0Xa02a	/* SeaLINK+8 (2803-ROHS) Port 1+2 */
+#define SEALEVEL_2803R_2_PID	0Xa02b	/* SeaLINK+8 (2803-ROHS) Port 3+4 */
+#define SEALEVEL_2803R_3_PID	0Xa02c	/* SeaLINK+8 (2803-ROHS) Port 5+6 */
+#define SEALEVEL_2803R_4_PID	0Xa02d	/* SeaLINK+8 (2803-ROHS) Port 7+8 */
 
 /*
  * JETI SPECTROMETER SPECBOS 1201
@@ -1168,3 +1194,16 @@
  */
 /* TagTracer MIFARE*/
 #define FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID	0xF7C0
+
+/*
+ * Rainforest Automation
+ */
+/* ZigBee controller */
+#define FTDI_RF_R106		0x8A28
+
+/*
+ * Product: HCP HIT GPRS modem
+ * Manufacturer: HCP d.o.o.
+ * ATI command output: Cinterion MC55i
+ */
+#define FTDI_CINTERION_MC55I_PID	0xA951
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index e4db5ad..9f0b2bf 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -215,8 +215,10 @@ retry:
 	clear_bit(i, &port->write_urbs_free);
 	result = usb_submit_urb(urb, GFP_ATOMIC);
 	if (result) {
-		dev_err(&port->dev, "%s - error submitting urb: %d\n",
+		if (!port->port.console) {
+			dev_err(&port->dev, "%s - error submitting urb: %d\n",
 						__func__, result);
+		}
 		set_bit(i, &port->write_urbs_free);
 		spin_lock_irqsave(&port->lock, flags);
 		port->tx_bytes -= count;
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 0aac00a..8a90d58 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2677,15 +2677,7 @@ cleanup:
 
 static void edge_disconnect(struct usb_serial *serial)
 {
-	int i;
-	struct edgeport_port *edge_port;
-
 	dbg("%s", __func__);
-
-	for (i = 0; i < serial->num_ports; ++i) {
-		edge_port = usb_get_serial_port_data(serial->port[i]);
-		edge_remove_sysfs_attrs(edge_port->port);
-	}
 }
 
 static void edge_release(struct usb_serial *serial)
@@ -2764,6 +2756,7 @@ static struct usb_serial_driver edgeport_1port_device = {
 	.disconnect		= edge_disconnect,
 	.release		= edge_release,
 	.port_probe		= edge_create_sysfs_attrs,
+	.port_remove		= edge_remove_sysfs_attrs,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
@@ -2795,6 +2788,7 @@ static struct usb_serial_driver edgeport_2port_device = {
 	.disconnect		= edge_disconnect,
 	.release		= edge_release,
 	.port_probe		= edge_create_sysfs_attrs,
+	.port_remove		= edge_remove_sysfs_attrs,
 	.ioctl			= edge_ioctl,
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 7b50aa1..3257519 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -174,6 +174,7 @@
 
 #define CLK_MULTI_REGISTER         ((__u16)(0x02))
 #define CLK_START_VALUE_REGISTER   ((__u16)(0x03))
+#define GPIO_REGISTER              ((__u16)(0x07))
 
 #define SERIAL_LCR_DLAB            ((__u16)(0x0080))
 
@@ -1103,14 +1104,25 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	mos7840_port->read_urb = port->read_urb;
 
 	/* set up our bulk in urb */
-
-	usb_fill_bulk_urb(mos7840_port->read_urb,
-			  serial->dev,
-			  usb_rcvbulkpipe(serial->dev,
-					  port->bulk_in_endpointAddress),
-			  port->bulk_in_buffer,
-			  mos7840_port->read_urb->transfer_buffer_length,
-			  mos7840_bulk_in_callback, mos7840_port);
+	if ((serial->num_ports == 2)
+		&& ((((__u16)port->number -
+			(__u16)(port->serial->minor)) % 2) != 0)) {
+		usb_fill_bulk_urb(mos7840_port->read_urb,
+			serial->dev,
+			usb_rcvbulkpipe(serial->dev,
+				(port->bulk_in_endpointAddress) + 2),
+			port->bulk_in_buffer,
+			mos7840_port->read_urb->transfer_buffer_length,
+			mos7840_bulk_in_callback, mos7840_port);
+	} else {
+		usb_fill_bulk_urb(mos7840_port->read_urb,
+			serial->dev,
+			usb_rcvbulkpipe(serial->dev,
+				port->bulk_in_endpointAddress),
+			port->bulk_in_buffer,
+			mos7840_port->read_urb->transfer_buffer_length,
+			mos7840_bulk_in_callback, mos7840_port);
+	}
 
 	dbg("mos7840_open: bulkin endpoint is %d",
 	    port->bulk_in_endpointAddress);
@@ -1521,13 +1533,25 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 	memcpy(urb->transfer_buffer, current_position, transfer_size);
 
 	/* fill urb with data and submit  */
-	usb_fill_bulk_urb(urb,
-			  serial->dev,
-			  usb_sndbulkpipe(serial->dev,
-					  port->bulk_out_endpointAddress),
-			  urb->transfer_buffer,
-			  transfer_size,
-			  mos7840_bulk_out_data_callback, mos7840_port);
+	if ((serial->num_ports == 2)
+		&& ((((__u16)port->number -
+			(__u16)(port->serial->minor)) % 2) != 0)) {
+		usb_fill_bulk_urb(urb,
+			serial->dev,
+			usb_sndbulkpipe(serial->dev,
+				(port->bulk_out_endpointAddress) + 2),
+			urb->transfer_buffer,
+			transfer_size,
+			mos7840_bulk_out_data_callback, mos7840_port);
+	} else {
+		usb_fill_bulk_urb(urb,
+			serial->dev,
+			usb_sndbulkpipe(serial->dev,
+				port->bulk_out_endpointAddress),
+			urb->transfer_buffer,
+			transfer_size,
+			mos7840_bulk_out_data_callback, mos7840_port);
+	}
 
 	data1 = urb->transfer_buffer;
 	dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress);
@@ -1840,7 +1864,7 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
 
 	} else {
 #ifdef HW_flow_control
-		/ *setting h/w flow control bit to 0 */
+		/* setting h/w flow control bit to 0 */
 		Data = 0xb;
 		mos7840_port->shadowMCR = Data;
 		status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
@@ -2310,19 +2334,26 @@ static int mos7840_ioctl(struct tty_struct *tty,
 
 static int mos7840_calc_num_ports(struct usb_serial *serial)
 {
-	int mos7840_num_ports = 0;
-
-	dbg("numberofendpoints: cur %d, alt %d",
-	    (int)serial->interface->cur_altsetting->desc.bNumEndpoints,
-	    (int)serial->interface->altsetting->desc.bNumEndpoints);
-	if (serial->interface->cur_altsetting->desc.bNumEndpoints == 5) {
-		mos7840_num_ports = serial->num_ports = 2;
-	} else if (serial->interface->cur_altsetting->desc.bNumEndpoints == 9) {
+	__u16 Data = 0x00;
+	int ret = 0;
+	int mos7840_num_ports;
+
+	ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+		MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &Data,
+		VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+
+	if ((Data & 0x01) == 0) {
+		mos7840_num_ports = 2;
+		serial->num_bulk_in = 2;
+		serial->num_bulk_out = 2;
+		serial->num_ports = 2;
+	} else {
+		mos7840_num_ports = 4;
 		serial->num_bulk_in = 4;
 		serial->num_bulk_out = 4;
-		mos7840_num_ports = serial->num_ports = 4;
+		serial->num_ports = 4;
 	}
-	dbg ("mos7840_num_ports = %d", mos7840_num_ports);
+
 	return mos7840_num_ports;
 }
 
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 60f38d5..0a8c1e6 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -315,7 +315,7 @@ static int omninet_write_room(struct tty_struct *tty)
 	int room = 0; /* Default: no room */
 
 	/* FIXME: no consistent locking for write_urb_busy */
-	if (wport->write_urb_busy)
+	if (!wport->write_urb_busy)
 		room = wport->bulk_out_size - OMNINET_HEADERLEN;
 
 	dbg("%s - returns %d", __func__, room);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index d2becb9..cbe3451 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -307,6 +307,9 @@ static void option_instat_callback(struct urb *urb);
 #define TELIT_VENDOR_ID				0x1bc7
 #define TELIT_PRODUCT_UC864E			0x1003
 #define TELIT_PRODUCT_UC864G			0x1004
+#define TELIT_PRODUCT_CC864_DUAL		0x1005
+#define TELIT_PRODUCT_CC864_SINGLE		0x1006
+#define TELIT_PRODUCT_DE910_DUAL		0x1010
 
 /* ZTE PRODUCTS */
 #define ZTE_VENDOR_ID				0x19d2
@@ -472,6 +475,21 @@ static void option_instat_callback(struct urb *urb);
 #define YUGA_PRODUCT_CLU528			0x260D
 #define YUGA_PRODUCT_CLU526			0x260F
 
+/* Viettel products */
+#define VIETTEL_VENDOR_ID			0x2262
+#define VIETTEL_PRODUCT_VT1000			0x0002
+
+/* ZD Incorporated */
+#define ZD_VENDOR_ID				0x0685
+#define ZD_PRODUCT_7000				0x7000
+
+/* LG products */
+#define LG_VENDOR_ID				0x1004
+#define LG_PRODUCT_L02C				0x618f
+
+/* MediaTek products */
+#define MEDIATEK_VENDOR_ID			0x0e8d
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
 		OPTION_BLACKLIST_NONE = 0,
@@ -690,6 +708,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED3) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED4) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED5) },
@@ -756,6 +775,9 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_DUAL) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
@@ -776,7 +798,6 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff),
@@ -791,7 +812,6 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
-	/* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0026, 0xff, 0xff, 0xff) }, */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },
@@ -816,7 +836,6 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
-	/* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0053, 0xff, 0xff, 0xff) }, */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
@@ -824,7 +843,6 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff),
@@ -834,7 +852,6 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0067, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0069, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0076, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0077, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0078, 0xff, 0xff, 0xff) },
@@ -843,6 +860,16 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0083, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0086, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0087, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0088, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0089, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0090, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0091, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0092, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0093, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0095, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0096, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0097, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0105, 0xff, 0xff, 0xff) },
@@ -863,23 +890,20 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0144, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0145, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0146, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0148, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0149, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0150, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0151, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0153, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0154, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0160, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0164, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
@@ -1054,17 +1078,27 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
+	  0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
-	  0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) },
+
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
@@ -1173,6 +1207,13 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) },
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) },
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) },        /* MediaTek MT6276M modem & app port */
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
@@ -1335,6 +1376,7 @@ static int option_probe(struct usb_serial *serial,
 		serial->interface->cur_altsetting->desc.bInterfaceNumber,
 		OPTION_BLACKLIST_RESERVED_IF,
 		(const struct option_blacklist_info *) id->driver_info))
+		return -ENODEV;
 
 	/* Don't bind network interface on Samsung GT-B3730, it is handled by a separate module */
 	if (serial->dev->descriptor.idVendor == SAMSUNG_VENDOR_ID &&
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index d44c669..5aa7172 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -424,7 +424,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	control = priv->line_control;
 	if ((cflag & CBAUD) == B0)
 		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
-	else
+	else if ((old_termios->c_cflag & CBAUD) == B0)
 		priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
 	if (control != priv->line_control) {
 		control = priv->line_control;
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
index 30b73e6..a348198 100644
--- a/drivers/usb/serial/qcaux.c
+++ b/drivers/usb/serial/qcaux.c
@@ -36,6 +36,7 @@
 #define UTSTARCOM_PRODUCT_UM175_V1		0x3712
 #define UTSTARCOM_PRODUCT_UM175_V2		0x3714
 #define UTSTARCOM_PRODUCT_UM175_ALLTEL		0x3715
+#define PANTECH_PRODUCT_UML190_VZW		0x3716
 #define PANTECH_PRODUCT_UML290_VZW		0x3718
 
 /* CMOTECH devices */
@@ -67,7 +68,11 @@ static struct usb_device_id id_table[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xfe, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfd, 0xff) },  /* NMEA */
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfe, 0xff) },  /* WMC */
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) },  /* DIAG */
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 3508152..a89c0ac 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -23,34 +23,44 @@
 
 static int debug;
 
+#define DEVICE_G1K(v, p) \
+	USB_DEVICE(v, p), .driver_info = 1
+
 static const struct usb_device_id id_table[] = {
-	{USB_DEVICE(0x05c6, 0x9211)},	/* Acer Gobi QDL device */
-	{USB_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
-	{USB_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
-	{USB_DEVICE(0x03f0, 0x201d)},	/* HP un2400 Gobi QDL Device */
-	{USB_DEVICE(0x03f0, 0x371d)},	/* HP un2430 Mobile Broadband Module */
-	{USB_DEVICE(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */
-	{USB_DEVICE(0x04da, 0x250c)},	/* Panasonic Gobi QDL device */
-	{USB_DEVICE(0x413c, 0x8172)},	/* Dell Gobi Modem device */
-	{USB_DEVICE(0x413c, 0x8171)},	/* Dell Gobi QDL device */
-	{USB_DEVICE(0x1410, 0xa001)},	/* Novatel Gobi Modem device */
-	{USB_DEVICE(0x1410, 0xa008)},	/* Novatel Gobi QDL device */
-	{USB_DEVICE(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
-	{USB_DEVICE(0x0b05, 0x1774)},	/* Asus Gobi QDL device */
-	{USB_DEVICE(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */
-	{USB_DEVICE(0x19d2, 0xfff2)},	/* ONDA Gobi QDL device */
-	{USB_DEVICE(0x1557, 0x0a80)},	/* OQO Gobi QDL device */
-	{USB_DEVICE(0x05c6, 0x9001)},   /* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9002)},	/* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9202)},	/* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9203)},	/* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9222)},	/* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9008)},	/* Generic Gobi QDL device */
-	{USB_DEVICE(0x05c6, 0x9009)},	/* Generic Gobi Modem device */
-	{USB_DEVICE(0x05c6, 0x9201)},	/* Generic Gobi QDL device */
-	{USB_DEVICE(0x05c6, 0x9221)},	/* Generic Gobi QDL device */
-	{USB_DEVICE(0x05c6, 0x9231)},	/* Generic Gobi QDL device */
-	{USB_DEVICE(0x1f45, 0x0001)},	/* Unknown Gobi QDL device */
+	/* Gobi 1000 devices */
+	{DEVICE_G1K(0x05c6, 0x9211)},	/* Acer Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
+	{DEVICE_G1K(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
+	{DEVICE_G1K(0x03f0, 0x201d)},	/* HP un2400 Gobi QDL Device */
+	{DEVICE_G1K(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */
+	{DEVICE_G1K(0x04da, 0x250c)},	/* Panasonic Gobi QDL device */
+	{DEVICE_G1K(0x413c, 0x8172)},	/* Dell Gobi Modem device */
+	{DEVICE_G1K(0x413c, 0x8171)},	/* Dell Gobi QDL device */
+	{DEVICE_G1K(0x1410, 0xa001)},	/* Novatel Gobi Modem device */
+	{DEVICE_G1K(0x1410, 0xa008)},	/* Novatel Gobi QDL device */
+	{DEVICE_G1K(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
+	{DEVICE_G1K(0x0b05, 0x1774)},	/* Asus Gobi QDL device */
+	{DEVICE_G1K(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */
+	{DEVICE_G1K(0x19d2, 0xfff2)},	/* ONDA Gobi QDL device */
+	{DEVICE_G1K(0x1557, 0x0a80)},	/* OQO Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9001)},   /* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9002)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9202)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9203)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9222)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9008)},	/* Generic Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9009)},	/* Generic Gobi Modem device */
+	{DEVICE_G1K(0x05c6, 0x9201)},	/* Generic Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9221)},	/* Generic Gobi QDL device */
+	{DEVICE_G1K(0x05c6, 0x9231)},	/* Generic Gobi QDL device */
+	{DEVICE_G1K(0x1f45, 0x0001)},	/* Unknown Gobi QDL device */
+
+	/* Gobi 2000 devices */
+	{USB_DEVICE(0x1410, 0xa010)},	/* Novatel Gobi 2000 QDL device */
+	{USB_DEVICE(0x1410, 0xa011)},	/* Novatel Gobi 2000 QDL device */
+	{USB_DEVICE(0x1410, 0xa012)},	/* Novatel Gobi 2000 QDL device */
+	{USB_DEVICE(0x1410, 0xa013)},	/* Novatel Gobi 2000 QDL device */
+	{USB_DEVICE(0x1410, 0xa014)},	/* Novatel Gobi 2000 QDL device */
 	{USB_DEVICE(0x413c, 0x8185)},	/* Dell Gobi 2000 QDL device (N0218, VU936) */
 	{USB_DEVICE(0x413c, 0x8186)},	/* Dell Gobi 2000 Modem device (N0218, VU936) */
 	{USB_DEVICE(0x05c6, 0x9208)},	/* Generic Gobi 2000 QDL device */
@@ -85,9 +95,18 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x16d8, 0x8002)},	/* CMDTech Gobi 2000 Modem device (VU922) */
 	{USB_DEVICE(0x05c6, 0x9204)},	/* Gobi 2000 QDL device */
 	{USB_DEVICE(0x05c6, 0x9205)},	/* Gobi 2000 Modem device */
+
+	/* Gobi 3000 devices */
+	{USB_DEVICE(0x03f0, 0x371d)},	/* HP un2430 Gobi 3000 QDL */
+	{USB_DEVICE(0x05c6, 0x920c)},	/* Gobi 3000 QDL */
+	{USB_DEVICE(0x05c6, 0x920d)},	/* Gobi 3000 Composite */
+	{USB_DEVICE(0x1410, 0xa020)},   /* Novatel Gobi 3000 QDL */
+	{USB_DEVICE(0x1410, 0xa021)},	/* Novatel Gobi 3000 Composite */
+	{USB_DEVICE(0x413c, 0x8193)},	/* Dell Gobi 3000 QDL */
+	{USB_DEVICE(0x413c, 0x8194)},	/* Dell Gobi 3000 Composite */
 	{USB_DEVICE(0x1199, 0x9013)},	/* Sierra Wireless Gobi 3000 Modem device (MC8355) */
-	{USB_DEVICE(0x05c6, 0x9048)},	/* MDM9x15 device */
-	{USB_DEVICE(0x05c6, 0x904C)},	/* MDM9x15 device */
+	{USB_DEVICE(0x12D1, 0x14F0)},	/* Sony Gobi 3000 QDL */
+	{USB_DEVICE(0x12D1, 0x14F1)},	/* Sony Gobi 3000 Composite */
 	{ }				/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, id_table);
@@ -111,8 +130,10 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 	int retval = -ENODEV;
 	__u8 nintf;
 	__u8 ifnum;
+	bool is_gobi1k = id->driver_info ? true : false;
 
 	dbg("%s", __func__);
+	dbg("Is Gobi 1000 = %d", is_gobi1k);
 
 	nintf = serial->dev->actconfig->desc.bNumInterfaces;
 	dbg("Num Interfaces = %d", nintf);
@@ -160,15 +181,25 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 
 	case 3:
 	case 4:
-		/* Composite mode */
-		/* ifnum == 0 is a broadband network adapter */
-		if (ifnum == 1) {
-			/*
-			 * Diagnostics Monitor (serial line 9600 8N1)
-			 * Qualcomm DM protocol
-			 * use "libqcdm" (ModemManager) for communication
-			 */
-			dbg("Diagnostics Monitor found");
+		/* Composite mode; don't bind to the QMI/net interface as that
+		 * gets handled by other drivers.
+		 */
+
+		/* Gobi 1K USB layout:
+		 * 0: serial port (doesn't respond)
+		 * 1: serial port (doesn't respond)
+		 * 2: AT-capable modem port
+		 * 3: QMI/net
+		 *
+		 * Gobi 2K+ USB layout:
+		 * 0: QMI/net
+		 * 1: DM/DIAG (use libqcdm from ModemManager for communication)
+		 * 2: AT-capable modem port
+		 * 3: NMEA
+		 */
+
+		if (ifnum == 1 && !is_gobi1k) {
+			dbg("Gobi 2K+ DM/DIAG interface found");
 			retval = usb_set_interface(serial->dev, ifnum, 0);
 			if (retval < 0) {
 				dev_err(&serial->dev->dev,
@@ -187,13 +218,13 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 				retval = -ENODEV;
 				kfree(data);
 			}
-		} else if (ifnum==3) {
+		} else if (ifnum==3 && !is_gobi1k) {
 			/*
 			 * NMEA (serial line 9600 8N1)
 			 * # echo "\$GPS_START" > /dev/ttyUSBx
 			 * # echo "\$GPS_STOP"  > /dev/ttyUSBx
 			 */
-			dbg("NMEA GPS interface found");
+			dbg("Gobi 2K+ NMEA GPS interface found");
 			retval = usb_set_interface(serial->dev, ifnum, 0);
 			if (retval < 0) {
 				dev_err(&serial->dev->dev,
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index d5d136a..ef71ba3 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -221,7 +221,7 @@ static const struct sierra_iface_info typeB_interface_list = {
 };
 
 /* 'blacklist' of interfaces not served by this driver */
-static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11 };
+static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11, 19, 20 };
 static const struct sierra_iface_info direct_ip_interface_blacklist = {
 	.infolen = ARRAY_SIZE(direct_ip_non_serial_ifaces),
 	.ifaceinfo = direct_ip_non_serial_ifaces,
@@ -298,6 +298,9 @@ static const struct usb_device_id id_table[] = {
 	/* Sierra Wireless HSPA Non-Composite Device */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
 	{ USB_DEVICE(0x1199, 0x6893) },	/* Sierra Wireless Device */
+	{ USB_DEVICE(0x1199, 0x68A2),   /* Sierra Wireless MC77xx in QMI mode */
+	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+	},
 	{ USB_DEVICE(0x1199, 0x68A3), 	/* Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index ea84456..21c82b0 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -165,7 +165,7 @@ static unsigned int product_5052_count;
 /* the array dimension is the number of default entries plus */
 /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
 /* null entry */
-static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_3410[14+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
@@ -179,6 +179,7 @@ static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
+	{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
 };
 
 static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
@@ -188,7 +189,7 @@ static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
 };
 
-static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_combined[18+2*TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
@@ -206,6 +207,7 @@ static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1]
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
+	{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
 	{ }
 };
 
diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h
index 2aac195..f140f1b 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.h
+++ b/drivers/usb/serial/ti_usb_3410_5052.h
@@ -49,6 +49,10 @@
 #define MTS_MT9234ZBA_PRODUCT_ID	0xF115
 #define MTS_MT9234ZBAOLD_PRODUCT_ID	0x0319
 
+/* Abbott Diabetics vendor and product ids */
+#define ABBOTT_VENDOR_ID		0x1a61
+#define ABBOTT_PRODUCT_ID		0x3410
+
 /* Commands */
 #define TI_GET_VERSION			0x01
 #define TI_GET_PORT_STATUS		0x02
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 1c03130..5d7b71b 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1059,6 +1059,12 @@ int usb_serial_probe(struct usb_interface *interface,
 		serial->attached = 1;
 	}
 
+	/* Avoid race with tty_open and serial_install by setting the
+	 * disconnected flag and not clearing it until all ports have been
+	 * registered.
+	 */
+	serial->disconnected = 1;
+
 	if (get_free_serial(serial, num_ports, &minor) == NULL) {
 		dev_err(&interface->dev, "No more free serial devices\n");
 		goto probe_error;
@@ -1083,6 +1089,8 @@ int usb_serial_probe(struct usb_interface *interface,
 		}
 	}
 
+	serial->disconnected = 0;
+
 	usb_serial_console_init(debug, minor);
 
 exit:
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 9d6cf49..2ff93c0 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -788,15 +788,19 @@ static void quiesce_and_remove_host(struct us_data *us)
 	struct Scsi_Host *host = us_to_host(us);
 
 	/* If the device is really gone, cut short reset delays */
-	if (us->pusb_dev->state == USB_STATE_NOTATTACHED)
+	if (us->pusb_dev->state == USB_STATE_NOTATTACHED) {
 		set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
+		wake_up(&us->delay_wait);
+	}
 
-	/* Prevent SCSI-scanning (if it hasn't started yet)
-	 * and wait for the SCSI-scanning thread to stop.
+	/* Prevent SCSI scanning (if it hasn't started yet)
+	 * or wait for the SCSI-scanning routine to stop.
 	 */
-	set_bit(US_FLIDX_DONT_SCAN, &us->dflags);
-	wake_up(&us->delay_wait);
-	wait_for_completion(&us->scanning_done);
+	cancel_delayed_work_sync(&us->scan_dwork);
+
+	/* Balance autopm calls if scanning was cancelled */
+	if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags))
+		usb_autopm_put_interface_no_suspend(us->pusb_intf);
 
 	/* Removing the host will perform an orderly shutdown: caches
 	 * synchronized, disks spun down, etc.
@@ -823,52 +827,28 @@ static void release_everything(struct us_data *us)
 	scsi_host_put(us_to_host(us));
 }
 
-/* Thread to carry out delayed SCSI-device scanning */
-static int usb_stor_scan_thread(void * __us)
+/* Delayed-work routine to carry out SCSI-device scanning */
+static void usb_stor_scan_dwork(struct work_struct *work)
 {
-	struct us_data *us = (struct us_data *)__us;
+	struct us_data *us = container_of(work, struct us_data,
+			scan_dwork.work);
 	struct device *dev = &us->pusb_intf->dev;
 
-	dev_dbg(dev, "device found\n");
+	dev_dbg(dev, "starting scan\n");
 
-	set_freezable_with_signal();
-	/*
-	 * Wait for the timeout to expire or for a disconnect
-	 *
-	 * We can't freeze in this thread or we risk causing khubd to
-	 * fail to freeze, but we can't be non-freezable either. Nor can
-	 * khubd freeze while waiting for scanning to complete as it may
-	 * hold the device lock, causing a hang when suspending devices.
-	 * So we request a fake signal when freezing and use
-	 * interruptible sleep to kick us out of our wait early when
-	 * freezing happens.
-	 */
-	if (delay_use > 0) {
-		dev_dbg(dev, "waiting for device to settle "
-				"before scanning\n");
-		wait_event_interruptible_timeout(us->delay_wait,
-				test_bit(US_FLIDX_DONT_SCAN, &us->dflags),
-				delay_use * HZ);
+	/* For bulk-only devices, determine the max LUN value */
+	if (us->protocol == USB_PR_BULK && !(us->fflags & US_FL_SINGLE_LUN)) {
+		mutex_lock(&us->dev_mutex);
+		us->max_lun = usb_stor_Bulk_max_lun(us);
+		mutex_unlock(&us->dev_mutex);
 	}
+	scsi_scan_host(us_to_host(us));
+	dev_dbg(dev, "scan complete\n");
 
-	/* If the device is still connected, perform the scanning */
-	if (!test_bit(US_FLIDX_DONT_SCAN, &us->dflags)) {
-
-		/* For bulk-only devices, determine the max LUN value */
-		if (us->protocol == USB_PR_BULK &&
-				!(us->fflags & US_FL_SINGLE_LUN)) {
-			mutex_lock(&us->dev_mutex);
-			us->max_lun = usb_stor_Bulk_max_lun(us);
-			mutex_unlock(&us->dev_mutex);
-		}
-		scsi_scan_host(us_to_host(us));
-		dev_dbg(dev, "scan complete\n");
-
-		/* Should we unbind if no devices were detected? */
-	}
+	/* Should we unbind if no devices were detected? */
 
 	usb_autopm_put_interface(us->pusb_intf);
-	complete_and_exit(&us->scanning_done, 0);
+	clear_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
 }
 
 static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf)
@@ -918,7 +898,7 @@ int usb_stor_probe1(struct us_data **pus,
 	init_completion(&us->cmnd_ready);
 	init_completion(&(us->notify));
 	init_waitqueue_head(&us->delay_wait);
-	init_completion(&us->scanning_done);
+	INIT_DELAYED_WORK(&us->scan_dwork, usb_stor_scan_dwork);
 
 	/* Associate the us_data structure with the USB device */
 	result = associate_dev(us, intf);
@@ -949,7 +929,6 @@ EXPORT_SYMBOL_GPL(usb_stor_probe1);
 /* Second part of general USB mass-storage probing */
 int usb_stor_probe2(struct us_data *us)
 {
-	struct task_struct *th;
 	int result;
 	struct device *dev = &us->pusb_intf->dev;
 
@@ -990,20 +969,14 @@ int usb_stor_probe2(struct us_data *us)
 		goto BadDevice;
 	}
 
-	/* Start up the thread for delayed SCSI-device scanning */
-	th = kthread_create(usb_stor_scan_thread, us, "usb-stor-scan");
-	if (IS_ERR(th)) {
-		dev_warn(dev,
-				"Unable to start the device-scanning thread\n");
-		complete(&us->scanning_done);
-		quiesce_and_remove_host(us);
-		result = PTR_ERR(th);
-		goto BadDevice;
-	}
-
+	/* Submit the delayed_work for SCSI-device scanning */
 	usb_autopm_get_interface_no_resume(us->pusb_intf);
-	wake_up_process(th);
+	set_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
 
+	if (delay_use > 0)
+		dev_dbg(dev, "waiting for device to settle before scanning\n");
+	queue_delayed_work(system_freezable_wq, &us->scan_dwork,
+			delay_use * HZ);
 	return 0;
 
 	/* We come here if there are any problems */
@@ -1076,6 +1049,7 @@ static struct usb_driver usb_storage_driver = {
 	.id_table =	usb_storage_usb_ids,
 	.supports_autosuspend = 1,
 	.soft_unbind =	1,
+	.no_dynamic_id = 1,
 };
 
 static int __init usb_stor_init(void)
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 7b0f211..75f70f0 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -47,6 +47,7 @@
 #include <linux/blkdev.h>
 #include <linux/completion.h>
 #include <linux/mutex.h>
+#include <linux/workqueue.h>
 #include <scsi/scsi_host.h>
 
 struct us_data;
@@ -72,7 +73,7 @@ struct us_unusual_dev {
 #define US_FLIDX_DISCONNECTING	3	/* disconnect in progress   */
 #define US_FLIDX_RESETTING	4	/* device reset in progress */
 #define US_FLIDX_TIMED_OUT	5	/* SCSI midlayer timed out  */
-#define US_FLIDX_DONT_SCAN	6	/* don't scan (disconnect)  */
+#define US_FLIDX_SCAN_PENDING	6	/* scanning not yet done    */
 #define US_FLIDX_REDO_READ10	7	/* redo READ(10) command    */
 #define US_FLIDX_READ10_WORKED	8	/* previous READ(10) succeeded */
 
@@ -147,8 +148,8 @@ struct us_data {
 	/* mutual exclusion and synchronization structures */
 	struct completion	cmnd_ready;	 /* to sleep thread on	    */
 	struct completion	notify;		 /* thread begin/end	    */
-	wait_queue_head_t	delay_wait;	 /* wait during scan, reset */
-	struct completion	scanning_done;	 /* wait for scan thread    */
+	wait_queue_head_t	delay_wait;	 /* wait during reset	    */
+	struct delayed_work	scan_dwork;	 /* for async scanning      */
 
 	/* subdriver information */
 	void			*extra;		 /* Any extra data          */