Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (260 commits)
  usb: renesas_usbhs: fixup inconsistent return from usbhs_pkt_push()
  usb/isp1760: Allow to optionally trigger low-level chip reset via GPIOLIB.
  USB: gadget: midi: memory leak in f_midi_bind_config()
  USB: gadget: midi: fix range check in f_midi_out_open()
  QE/FHCI: fixed the CONTROL bug
  usb: renesas_usbhs: tidyup for smatch warnings
  USB: Fix USB Kconfig dependency problem on 85xx/QoirQ platforms
  EHCI: workaround for MosChip controller bug
  usb: gadget: file_storage: fix race on unloading
  USB: ftdi_sio.c: Use ftdi async_icount structure for TIOCMIWAIT, as in other drivers
  USB: ftdi_sio.c:Fill MSR fields of the ftdi async_icount structure
  USB: ftdi_sio.c: Fill LSR fields of the ftdi async_icount structure
  USB: ftdi_sio.c:Fill TX field of the ftdi async_icount structure
  USB: ftdi_sio.c: Fill the RX field of the ftdi async_icount structure
  USB: ftdi_sio.c: Basic icount infrastructure for ftdi_sio
  usb/isp1760: Let OF bindings depend on general CONFIG_OF instead of PPC_OF .
  USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI Board
  USB: Fix runtime wakeup on OHCI
  xHCI/USB: Make xHCI driver have a BOS descriptor.
  usb: gadget: add new usb gadget for ACM and mass storage
  ...

228 files changed, 14696 insertions, 4156 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 48f1781..4ac2750 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -12,6 +12,11 @@ menuconfig USB_SUPPORT
 
 if USB_SUPPORT
 
+config USB_COMMON
+	tristate
+	default y
+	depends on USB || USB_GADGET
+
 # Host-side USB depends on having a host controller
 # NOTE:  dummy_hcd is always an option, but it's ignored here ...
 # NOTE:  SL-811 option should be board-specific ...
@@ -19,6 +24,7 @@ config USB_ARCH_HAS_HCD
 	boolean
 	default y if USB_ARCH_HAS_OHCI
 	default y if USB_ARCH_HAS_EHCI
+	default y if USB_ARCH_HAS_XHCI
 	default y if PCMCIA && !M32R			# sl811_cs
 	default y if ARM				# SL-811
 	default y if BLACKFIN				# SL-811
@@ -54,7 +60,7 @@ config USB_ARCH_HAS_OHCI
 # some non-PCI hcds implement EHCI
 config USB_ARCH_HAS_EHCI
 	boolean
-	default y if PPC_83xx
+	default y if FSL_SOC
 	default y if PPC_MPC512x
 	default y if SOC_AU1200
 	default y if ARCH_IXP4XX
@@ -69,6 +75,12 @@ config USB_ARCH_HAS_EHCI
 	default y if ARCH_MSM
 	default y if MICROBLAZE
 	default y if SPARC_LEON
+	default y if ARCH_MMP
+	default PCI
+
+# some non-PCI HCDs implement xHCI
+config USB_ARCH_HAS_XHCI
+	boolean
 	default PCI
 
 # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
@@ -110,6 +122,8 @@ config USB
 
 source "drivers/usb/core/Kconfig"
 
+source "drivers/usb/dwc3/Kconfig"
+
 source "drivers/usb/mon/Kconfig"
 
 source "drivers/usb/wusbcore/Kconfig"
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 30ddf8d..75eca76 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -6,6 +6,8 @@
 
 obj-$(CONFIG_USB)		+= core/
 
+obj-$(CONFIG_USB_DWC3)		+= dwc3/
+
 obj-$(CONFIG_USB_MON)		+= mon/
 
 obj-$(CONFIG_PCI)		+= host/
@@ -51,3 +53,5 @@ obj-$(CONFIG_USB_MUSB_HDRC)	+= musb/
 obj-$(CONFIG_USB_RENESAS_USBHS)	+= renesas_usbhs/
 obj-$(CONFIG_USB_OTG_UTILS)	+= otg/
 obj-$(CONFIG_USB_GADGET)	+= gadget/
+
+obj-$(CONFIG_USB_COMMON)	+= usb-common.o
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index dac7676..3ec6699 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1058,11 +1058,11 @@ made_compressed_probe:
 		goto alloc_fail;
 	}
 
-	ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize);
-	readsize = le16_to_cpu(epread->wMaxPacketSize) *
+	ctrlsize = usb_endpoint_maxp(epctrl);
+	readsize = usb_endpoint_maxp(epread) *
 				(quirks == SINGLE_RX_URB ? 1 : 2);
 	acm->combined_interfaces = combined_interfaces;
-	acm->writesize = le16_to_cpu(epwrite->wMaxPacketSize) * 20;
+	acm->writesize = usb_endpoint_maxp(epwrite) * 20;
 	acm->control = control_interface;
 	acm->data = data_interface;
 	acm->minor = minor;
@@ -1534,6 +1534,9 @@ static const struct usb_device_id acm_ids[] = {
 	{ NOKIA_PCSUITE_ACM_INFO(0x03cd), }, /* Nokia C7 */
 	{ SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */
 
+	/* Support for Owen devices */
+	{ USB_DEVICE(0x03eb, 0x0030), }, /* Owen SI30 */
+
 	/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
 
 	/* Support Lego NXT using pbLua firmware */
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 2b9ff51..1d26a71 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -682,7 +682,7 @@ next_desc:
 	if (!ep || !usb_endpoint_is_int_in(ep))
 		goto err;
 
-	desc->wMaxPacketSize = le16_to_cpu(ep->wMaxPacketSize);
+	desc->wMaxPacketSize = usb_endpoint_maxp(ep);
 	desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0;
 
 	desc->orq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 3f94ac3..12cf5e7 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -186,8 +186,7 @@ static int usbtmc_ioctl_abort_bulk_in(struct usbtmc_device_data *data)
 	for (n = 0; n < current_setting->desc.bNumEndpoints; n++)
 		if (current_setting->endpoint[n].desc.bEndpointAddress ==
 			data->bulk_in)
-			max_size = le16_to_cpu(current_setting->endpoint[n].
-						desc.wMaxPacketSize);
+			max_size = usb_endpoint_maxp(&current_setting->endpoint[n].desc);
 
 	if (max_size == 0) {
 		dev_err(dev, "Couldn't get wMaxPacketSize\n");
@@ -636,7 +635,7 @@ static int usbtmc_ioctl_clear(struct usbtmc_device_data *data)
 	for (n = 0; n < current_setting->desc.bNumEndpoints; n++) {
 		desc = &current_setting->endpoint[n].desc;
 		if (desc->bEndpointAddress == data->bulk_in)
-			max_size = le16_to_cpu(desc->wMaxPacketSize);
+			max_size = usb_endpoint_maxp(desc);
 	}
 
 	if (max_size == 0) {
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 26678ca..f4bdd0c 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -124,9 +124,9 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
 
 	if (usb_endpoint_xfer_isoc(&ep->desc))
 		max_tx = (desc->bMaxBurst + 1) * (desc->bmAttributes + 1) *
-			le16_to_cpu(ep->desc.wMaxPacketSize);
+			usb_endpoint_maxp(&ep->desc);
 	else if (usb_endpoint_xfer_int(&ep->desc))
-		max_tx = le16_to_cpu(ep->desc.wMaxPacketSize) *
+		max_tx = usb_endpoint_maxp(&ep->desc) *
 			(desc->bMaxBurst + 1);
 	else
 		max_tx = 999999;
@@ -241,7 +241,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 		    cfgno, inum, asnum, d->bEndpointAddress);
 		endpoint->desc.bmAttributes = USB_ENDPOINT_XFER_INT;
 		endpoint->desc.bInterval = 1;
-		if (le16_to_cpu(endpoint->desc.wMaxPacketSize) > 8)
+		if (usb_endpoint_maxp(&endpoint->desc) > 8)
 			endpoint->desc.wMaxPacketSize = cpu_to_le16(8);
 	}
 
@@ -254,7 +254,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 			&& usb_endpoint_xfer_bulk(d)) {
 		unsigned maxp;
 
-		maxp = le16_to_cpu(endpoint->desc.wMaxPacketSize) & 0x07ff;
+		maxp = usb_endpoint_maxp(&endpoint->desc) & 0x07ff;
 		if (maxp != 512)
 			dev_warn(ddev, "config %d interface %d altsetting %d "
 				"bulk endpoint 0x%X has invalid maxpacket %d\n",
@@ -755,3 +755,106 @@ err2:
 		dev_err(ddev, "out of memory\n");
 	return result;
 }
+
+void usb_release_bos_descriptor(struct usb_device *dev)
+{
+	if (dev->bos) {
+		kfree(dev->bos->desc);
+		kfree(dev->bos);
+		dev->bos = NULL;
+	}
+}
+
+/* Get BOS descriptor set */
+int usb_get_bos_descriptor(struct usb_device *dev)
+{
+	struct device *ddev = &dev->dev;
+	struct usb_bos_descriptor *bos;
+	struct usb_dev_cap_header *cap;
+	unsigned char *buffer;
+	int length, total_len, num, i;
+	int ret;
+
+	bos = kzalloc(sizeof(struct usb_bos_descriptor), GFP_KERNEL);
+	if (!bos)
+		return -ENOMEM;
+
+	/* Get BOS descriptor */
+	ret = usb_get_descriptor(dev, USB_DT_BOS, 0, bos, USB_DT_BOS_SIZE);
+	if (ret < USB_DT_BOS_SIZE) {
+		dev_err(ddev, "unable to get BOS descriptor\n");
+		if (ret >= 0)
+			ret = -ENOMSG;
+		kfree(bos);
+		return ret;
+	}
+
+	length = bos->bLength;
+	total_len = le16_to_cpu(bos->wTotalLength);
+	num = bos->bNumDeviceCaps;
+	kfree(bos);
+	if (total_len < length)
+		return -EINVAL;
+
+	dev->bos = kzalloc(sizeof(struct usb_host_bos), GFP_KERNEL);
+	if (!dev->bos)
+		return -ENOMEM;
+
+	/* Now let's get the whole BOS descriptor set */
+	buffer = kzalloc(total_len, GFP_KERNEL);
+	if (!buffer) {
+		ret = -ENOMEM;
+		goto err;
+	}
+	dev->bos->desc = (struct usb_bos_descriptor *)buffer;
+
+	ret = usb_get_descriptor(dev, USB_DT_BOS, 0, buffer, total_len);
+	if (ret < total_len) {
+		dev_err(ddev, "unable to get BOS descriptor set\n");
+		if (ret >= 0)
+			ret = -ENOMSG;
+		goto err;
+	}
+	total_len -= length;
+
+	for (i = 0; i < num; i++) {
+		buffer += length;
+		cap = (struct usb_dev_cap_header *)buffer;
+		length = cap->bLength;
+
+		if (total_len < length)
+			break;
+		total_len -= length;
+
+		if (cap->bDescriptorType != USB_DT_DEVICE_CAPABILITY) {
+			dev_warn(ddev, "descriptor type invalid, skip\n");
+			continue;
+		}
+
+		switch (cap->bDevCapabilityType) {
+		case USB_CAP_TYPE_WIRELESS_USB:
+			/* Wireless USB cap descriptor is handled by wusb */
+			break;
+		case USB_CAP_TYPE_EXT:
+			dev->bos->ext_cap =
+				(struct usb_ext_cap_descriptor *)buffer;
+			break;
+		case USB_SS_CAP_TYPE:
+			dev->bos->ss_cap =
+				(struct usb_ss_cap_descriptor *)buffer;
+			break;
+		case CONTAINER_ID_TYPE:
+			dev->bos->ss_id =
+				(struct usb_ss_container_id_descriptor *)buffer;
+			break;
+		default:
+			break;
+		}
+	}
+
+	return 0;
+
+err:
+	usb_release_bos_descriptor(dev);
+	return ret;
+}
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 0149c09..d956965 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -190,7 +190,7 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end,
 	dir = usb_endpoint_dir_in(desc) ? 'I' : 'O';
 
 	if (speed == USB_SPEED_HIGH) {
-		switch (le16_to_cpu(desc->wMaxPacketSize) & (0x03 << 11)) {
+		switch (usb_endpoint_maxp(desc) & (0x03 << 11)) {
 		case 1 << 11:
 			bandwidth = 2; break;
 		case 2 << 11:
@@ -240,7 +240,7 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end,
 
 	start += sprintf(start, format_endpt, desc->bEndpointAddress, dir,
 			 desc->bmAttributes, type,
-			 (le16_to_cpu(desc->wMaxPacketSize) & 0x07ff) *
+			 (usb_endpoint_maxp(desc) & 0x07ff) *
 			 bandwidth,
 			 interval, unit);
 	return start;
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 37518df..e3beaf2 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -46,6 +46,7 @@
 #include <linux/cdev.h>
 #include <linux/notifier.h>
 #include <linux/security.h>
+#include <linux/user_namespace.h>
 #include <asm/uaccess.h>
 #include <asm/byteorder.h>
 #include <linux/moduleparam.h>
@@ -68,7 +69,7 @@ struct dev_state {
 	wait_queue_head_t wait;     /* wake up if a request completed */
 	unsigned int discsignr;
 	struct pid *disc_pid;
-	uid_t disc_uid, disc_euid;
+	const struct cred *cred;
 	void __user *disccontext;
 	unsigned long ifclaimed;
 	u32 secid;
@@ -79,7 +80,7 @@ struct async {
 	struct list_head asynclist;
 	struct dev_state *ps;
 	struct pid *pid;
-	uid_t uid, euid;
+	const struct cred *cred;
 	unsigned int signr;
 	unsigned int ifnum;
 	void __user *userbuffer;
@@ -248,6 +249,7 @@ static struct async *alloc_async(unsigned int numisoframes)
 static void free_async(struct async *as)
 {
 	put_pid(as->pid);
+	put_cred(as->cred);
 	kfree(as->urb->transfer_buffer);
 	kfree(as->urb->setup_packet);
 	usb_free_urb(as->urb);
@@ -393,9 +395,8 @@ static void async_completed(struct urb *urb)
 	struct dev_state *ps = as->ps;
 	struct siginfo sinfo;
 	struct pid *pid = NULL;
-	uid_t uid = 0;
-	uid_t euid = 0;
 	u32 secid = 0;
+	const struct cred *cred = NULL;
 	int signr;
 
 	spin_lock(&ps->lock);
@@ -407,9 +408,8 @@ static void async_completed(struct urb *urb)
 		sinfo.si_errno = as->status;
 		sinfo.si_code = SI_ASYNCIO;
 		sinfo.si_addr = as->userurb;
-		pid = as->pid;
-		uid = as->uid;
-		euid = as->euid;
+		pid = get_pid(as->pid);
+		cred = get_cred(as->cred);
 		secid = as->secid;
 	}
 	snoop(&urb->dev->dev, "urb complete\n");
@@ -422,9 +422,11 @@ static void async_completed(struct urb *urb)
 		cancel_bulk_urbs(ps, as->bulk_addr);
 	spin_unlock(&ps->lock);
 
-	if (signr)
-		kill_pid_info_as_uid(sinfo.si_signo, &sinfo, pid, uid,
-				      euid, secid);
+	if (signr) {
+		kill_pid_info_as_cred(sinfo.si_signo, &sinfo, pid, cred, secid);
+		put_pid(pid);
+		put_cred(cred);
+	}
 
 	wake_up(&ps->wait);
 }
@@ -607,9 +609,10 @@ static int findintfep(struct usb_device *dev, unsigned int ep)
 }
 
 static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype,
-			   unsigned int index)
+			   unsigned int request, unsigned int index)
 {
 	int ret = 0;
+	struct usb_host_interface *alt_setting;
 
 	if (ps->dev->state != USB_STATE_UNAUTHENTICATED
 	 && ps->dev->state != USB_STATE_ADDRESS
@@ -618,6 +621,19 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype,
 	if (USB_TYPE_VENDOR == (USB_TYPE_MASK & requesttype))
 		return 0;
 
+	/*
+	 * check for the special corner case 'get_device_id' in the printer
+	 * class specification, where wIndex is (interface << 8 | altsetting)
+	 * instead of just interface
+	 */
+	if (requesttype == 0xa1 && request == 0) {
+		alt_setting = usb_find_alt_setting(ps->dev->actconfig,
+						   index >> 8, index & 0xff);
+		if (alt_setting
+		 && alt_setting->desc.bInterfaceClass == USB_CLASS_PRINTER)
+			index >>= 8;
+	}
+
 	index &= 0xff;
 	switch (requesttype & USB_RECIP_MASK) {
 	case USB_RECIP_ENDPOINT:
@@ -656,7 +672,6 @@ static int usbdev_open(struct inode *inode, struct file *file)
 {
 	struct usb_device *dev = NULL;
 	struct dev_state *ps;
-	const struct cred *cred = current_cred();
 	int ret;
 
 	ret = -ENOMEM;
@@ -706,8 +721,7 @@ static int usbdev_open(struct inode *inode, struct file *file)
 	init_waitqueue_head(&ps->wait);
 	ps->discsignr = 0;
 	ps->disc_pid = get_pid(task_pid(current));
-	ps->disc_uid = cred->uid;
-	ps->disc_euid = cred->euid;
+	ps->cred = get_current_cred();
 	ps->disccontext = NULL;
 	ps->ifclaimed = 0;
 	security_task_getsecid(current, &ps->secid);
@@ -749,6 +763,7 @@ static int usbdev_release(struct inode *inode, struct file *file)
 	usb_unlock_device(dev);
 	usb_put_dev(dev);
 	put_pid(ps->disc_pid);
+	put_cred(ps->cred);
 
 	as = async_getcompleted(ps);
 	while (as) {
@@ -770,7 +785,8 @@ static int proc_control(struct dev_state *ps, void __user *arg)
 
 	if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
 		return -EFAULT;
-	ret = check_ctrlrecip(ps, ctrl.bRequestType, ctrl.wIndex);
+	ret = check_ctrlrecip(ps, ctrl.bRequestType, ctrl.bRequest,
+			      ctrl.wIndex);
 	if (ret)
 		return ret;
 	wLength = ctrl.wLength;		/* To suppress 64k PAGE_SIZE warning */
@@ -1048,7 +1064,6 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 	struct usb_host_endpoint *ep;
 	struct async *as;
 	struct usb_ctrlrequest *dr = NULL;
-	const struct cred *cred = current_cred();
 	unsigned int u, totlen, isofrmlen;
 	int ret, ifnum = -1;
 	int is_in;
@@ -1100,7 +1115,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 			kfree(dr);
 			return -EINVAL;
 		}
-		ret = check_ctrlrecip(ps, dr->bRequestType,
+		ret = check_ctrlrecip(ps, dr->bRequestType, dr->bRequest,
 				      le16_to_cpup(&dr->wIndex));
 		if (ret) {
 			kfree(dr);
@@ -1262,8 +1277,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 	as->signr = uurb->signr;
 	as->ifnum = ifnum;
 	as->pid = get_pid(task_pid(current));
-	as->uid = cred->uid;
-	as->euid = cred->euid;
+	as->cred = get_current_cred();
 	security_task_getsecid(current, &as->secid);
 	if (!is_in && uurb->buffer_length > 0) {
 		if (copy_from_user(as->urb->transfer_buffer, uurb->buffer,
@@ -1981,9 +1995,8 @@ static void usbdev_remove(struct usb_device *udev)
 			sinfo.si_errno = EPIPE;
 			sinfo.si_code = SI_ASYNCIO;
 			sinfo.si_addr = ps->disccontext;
-			kill_pid_info_as_uid(ps->discsignr, &sinfo,
-					ps->disc_pid, ps->disc_uid,
-					ps->disc_euid, ps->secid);
+			kill_pid_info_as_cred(ps->discsignr, &sinfo,
+					ps->disc_pid, ps->cred, ps->secid);
 		}
 	}
 }
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 34e3da5..adf5ca8 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1583,7 +1583,7 @@ int usb_autopm_get_interface_async(struct usb_interface *intf)
 	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
 			__func__, atomic_read(&intf->dev.power.usage_count),
 			status);
-	if (status > 0)
+	if (status > 0 || status == -EINPROGRESS)
 		status = 0;
 	return status;
 }
@@ -1700,6 +1700,20 @@ int usb_runtime_idle(struct device *dev)
 	return 0;
 }
 
+int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+	int ret = -EPERM;
+
+	if (hcd->driver->set_usb2_hw_lpm) {
+		ret = hcd->driver->set_usb2_hw_lpm(hcd, udev, enable);
+		if (!ret)
+			udev->usb2_hw_lpm_enabled = enable;
+	}
+
+	return ret;
+}
+
 #endif /* CONFIG_USB_SUSPEND */
 
 struct bus_type usb_bus_type = {
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index df502a9..db7fe50 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -56,7 +56,7 @@ static ssize_t show_ep_wMaxPacketSize(struct device *dev,
 {
 	struct ep_device *ep = to_ep_device(dev);
 	return sprintf(buf, "%04x\n",
-			le16_to_cpu(ep->desc->wMaxPacketSize) & 0x07ff);
+		        usb_endpoint_maxp(ep->desc) & 0x07ff);
 }
 static DEVICE_ATTR(wMaxPacketSize, S_IRUGO, show_ep_wMaxPacketSize, NULL);
 
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index ce22f4a..a004db3 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -242,7 +242,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 
 	pci_set_master(dev);
 
-	retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
+	retval = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
 	if (retval != 0)
 		goto unmap_registers;
 	set_hs_companion(dev, hcd);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 73cbbd8..b3b7d06 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -442,7 +442,11 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 	struct usb_ctrlrequest *cmd;
  	u16		typeReq, wValue, wIndex, wLength;
 	u8		*ubuf = urb->transfer_buffer;
-	u8		tbuf [sizeof (struct usb_hub_descriptor)]
+	/*
+	 * tbuf should be as big as the BOS descriptor and
+	 * the USB hub descriptor.
+	 */
+	u8		tbuf[USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE]
 		__attribute__((aligned(4)));
 	const u8	*bufp = tbuf;
 	unsigned	len = 0;
@@ -562,6 +566,8 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 			else /* unsupported IDs --> "protocol stall" */
 				goto error;
 			break;
+		case USB_DT_BOS << 8:
+			goto nongeneric;
 		default:
 			goto error;
 		}
@@ -596,6 +602,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 	/* CLASS REQUESTS (and errors) */
 
 	default:
+nongeneric:
 		/* non-generic request */
 		switch (typeReq) {
 		case GetHubStatus:
@@ -605,6 +612,9 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 		case GetHubDescriptor:
 			len = sizeof (struct usb_hub_descriptor);
 			break;
+		case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+			/* len is returned by hub_control */
+			break;
 		}
 		status = hcd->driver->hub_control (hcd,
 			typeReq, wValue, wIndex,
@@ -615,7 +625,7 @@ error:
 		status = -EPIPE;
 	}
 
-	if (status) {
+	if (status < 0) {
 		len = 0;
 		if (status != -EPIPE) {
 			dev_dbg (hcd->self.controller,
@@ -624,6 +634,10 @@ error:
 				typeReq, wValue, wIndex,
 				wLength, status);
 		}
+	} else if (status > 0) {
+		/* hub_control may return the length of data copied. */
+		len = status;
+		status = 0;
 	}
 	if (len) {
 		if (urb->transfer_buffer_length < len)
@@ -2429,7 +2443,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	 * but drivers can override it in reset() if needed, along with
 	 * recording the overall controller's system wakeup capability.
 	 */
-	device_init_wakeup(&rhdev->dev, 1);
+	device_set_wakeup_capable(&rhdev->dev, 1);
 
 	/* HCD_FLAG_RH_RUNNING doesn't matter until the root hub is
 	 * registered.  But since the controller can die at any time,
@@ -2478,6 +2492,13 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	}
 	if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
 		usb_hcd_poll_rh_status(hcd);
+
+	/*
+	 * Host controllers don't generate their own wakeup requests;
+	 * they only forward requests from the root hub.  Therefore
+	 * controllers should always be enabled for remote wakeup.
+	 */
+	device_wakeup_enable(hcd->self.controller);
 	return retval;
 
 error_create_attr_group:
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index a428aa0..d6cc832 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1636,11 +1636,6 @@ void usb_disconnect(struct usb_device **pdev)
 	int			i;
 	struct usb_hcd		*hcd = bus_to_hcd(udev->bus);
 
-	if (!udev) {
-		pr_debug ("%s nodev\n", __func__);
-		return;
-	}
-
 	/* mark the device as inactive, so any further urb submissions for
 	 * this device (and any of its children) will fail immediately.
 	 * this quiesces everything except pending urbs.
@@ -2030,11 +2025,23 @@ static unsigned hub_is_wusb(struct usb_hub *hub)
 
 #define HUB_ROOT_RESET_TIME	50	/* times are in msec */
 #define HUB_SHORT_RESET_TIME	10
+#define HUB_BH_RESET_TIME	50
 #define HUB_LONG_RESET_TIME	200
 #define HUB_RESET_TIMEOUT	500
 
+static int hub_port_reset(struct usb_hub *hub, int port1,
+			struct usb_device *udev, unsigned int delay, bool warm);
+
+/* Is a USB 3.0 port in the Inactive state? */
+static bool hub_port_inactive(struct usb_hub *hub, u16 portstatus)
+{
+	return hub_is_superspeed(hub->hdev) &&
+		(portstatus & USB_PORT_STAT_LINK_STATE) ==
+		USB_SS_PORT_LS_SS_INACTIVE;
+}
+
 static int hub_port_wait_reset(struct usb_hub *hub, int port1,
-				struct usb_device *udev, unsigned int delay)
+			struct usb_device *udev, unsigned int delay, bool warm)
 {
 	int delay_time, ret;
 	u16 portstatus;
@@ -2051,28 +2058,71 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
 		if (ret < 0)
 			return ret;
 
-		/* Device went away? */
-		if (!(portstatus & USB_PORT_STAT_CONNECTION))
-			return -ENOTCONN;
-
-		/* bomb out completely if the connection bounced */
-		if ((portchange & USB_PORT_STAT_C_CONNECTION))
-			return -ENOTCONN;
-
-		/* if we`ve finished resetting, then break out of the loop */
-		if (!(portstatus & USB_PORT_STAT_RESET) &&
-		    (portstatus & USB_PORT_STAT_ENABLE)) {
-			if (hub_is_wusb(hub))
-				udev->speed = USB_SPEED_WIRELESS;
-			else if (hub_is_superspeed(hub->hdev))
-				udev->speed = USB_SPEED_SUPER;
-			else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
-				udev->speed = USB_SPEED_HIGH;
-			else if (portstatus & USB_PORT_STAT_LOW_SPEED)
-				udev->speed = USB_SPEED_LOW;
-			else
-				udev->speed = USB_SPEED_FULL;
-			return 0;
+		/*
+		 * Some buggy devices require a warm reset to be issued even
+		 * when the port appears not to be connected.
+		 */
+		if (!warm) {
+			/*
+			 * Some buggy devices can cause an NEC host controller
+			 * to transition to the "Error" state after a hot port
+			 * reset.  This will show up as the port state in
+			 * "Inactive", and the port may also report a
+			 * disconnect.  Forcing a warm port reset seems to make
+			 * the device work.
+			 *
+			 * See https://bugzilla.kernel.org/show_bug.cgi?id=41752
+			 */
+			if (hub_port_inactive(hub, portstatus)) {
+				int ret;
+
+				if ((portchange & USB_PORT_STAT_C_CONNECTION))
+					clear_port_feature(hub->hdev, port1,
+							USB_PORT_FEAT_C_CONNECTION);
+				if (portchange & USB_PORT_STAT_C_LINK_STATE)
+					clear_port_feature(hub->hdev, port1,
+							USB_PORT_FEAT_C_PORT_LINK_STATE);
+				if (portchange & USB_PORT_STAT_C_RESET)
+					clear_port_feature(hub->hdev, port1,
+							USB_PORT_FEAT_C_RESET);
+				dev_dbg(hub->intfdev, "hot reset failed, warm reset port %d\n",
+						port1);
+				ret = hub_port_reset(hub, port1,
+						udev, HUB_BH_RESET_TIME,
+						true);
+				if ((portchange & USB_PORT_STAT_C_CONNECTION))
+					clear_port_feature(hub->hdev, port1,
+							USB_PORT_FEAT_C_CONNECTION);
+				return ret;
+			}
+			/* Device went away? */
+			if (!(portstatus & USB_PORT_STAT_CONNECTION))
+				return -ENOTCONN;
+
+			/* bomb out completely if the connection bounced */
+			if ((portchange & USB_PORT_STAT_C_CONNECTION))
+				return -ENOTCONN;
+
+			/* if we`ve finished resetting, then break out of
+			 * the loop
+			 */
+			if (!(portstatus & USB_PORT_STAT_RESET) &&
+			    (portstatus & USB_PORT_STAT_ENABLE)) {
+				if (hub_is_wusb(hub))
+					udev->speed = USB_SPEED_WIRELESS;
+				else if (hub_is_superspeed(hub->hdev))
+					udev->speed = USB_SPEED_SUPER;
+				else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
+					udev->speed = USB_SPEED_HIGH;
+				else if (portstatus & USB_PORT_STAT_LOW_SPEED)
+					udev->speed = USB_SPEED_LOW;
+				else
+					udev->speed = USB_SPEED_FULL;
+				return 0;
+			}
+		} else {
+			if (portchange & USB_PORT_STAT_C_BH_RESET)
+				return 0;
 		}
 
 		/* switch to the long delay after two short delay failures */
@@ -2080,35 +2130,84 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
 			delay = HUB_LONG_RESET_TIME;
 
 		dev_dbg (hub->intfdev,
-			"port %d not reset yet, waiting %dms\n",
-			port1, delay);
+			"port %d not %sreset yet, waiting %dms\n",
+			port1, warm ? "warm " : "", delay);
 	}
 
 	return -EBUSY;
 }
 
+static void hub_port_finish_reset(struct usb_hub *hub, int port1,
+			struct usb_device *udev, int *status, bool warm)
+{
+	switch (*status) {
+	case 0:
+		if (!warm) {
+			struct usb_hcd *hcd;
+			/* TRSTRCY = 10 ms; plus some extra */
+			msleep(10 + 40);
+			update_devnum(udev, 0);
+			hcd = bus_to_hcd(udev->bus);
+			if (hcd->driver->reset_device) {
+				*status = hcd->driver->reset_device(hcd, udev);
+				if (*status < 0) {
+					dev_err(&udev->dev, "Cannot reset "
+							"HCD device state\n");
+					break;
+				}
+			}
+		}
+		/* FALL THROUGH */
+	case -ENOTCONN:
+	case -ENODEV:
+		clear_port_feature(hub->hdev,
+				port1, USB_PORT_FEAT_C_RESET);
+		/* FIXME need disconnect() for NOTATTACHED device */
+		if (warm) {
+			clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_BH_PORT_RESET);
+			clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_PORT_LINK_STATE);
+		} else {
+			usb_set_device_state(udev, *status
+					? USB_STATE_NOTATTACHED
+					: USB_STATE_DEFAULT);
+		}
+		break;
+	}
+}
+
+/* Handle port reset and port warm(BH) reset (for USB3 protocol ports) */
 static int hub_port_reset(struct usb_hub *hub, int port1,
-				struct usb_device *udev, unsigned int delay)
+			struct usb_device *udev, unsigned int delay, bool warm)
 {
 	int i, status;
-	struct usb_hcd *hcd;
 
-	hcd = bus_to_hcd(udev->bus);
-	/* Block EHCI CF initialization during the port reset.
-	 * Some companion controllers don't like it when they mix.
-	 */
-	down_read(&ehci_cf_port_reset_rwsem);
+	if (!warm) {
+		/* Block EHCI CF initialization during the port reset.
+		 * Some companion controllers don't like it when they mix.
+		 */
+		down_read(&ehci_cf_port_reset_rwsem);
+	} else {
+		if (!hub_is_superspeed(hub->hdev)) {
+			dev_err(hub->intfdev, "only USB3 hub support "
+						"warm reset\n");
+			return -EINVAL;
+		}
+	}
 
 	/* Reset the port */
 	for (i = 0; i < PORT_RESET_TRIES; i++) {
-		status = set_port_feature(hub->hdev,
-				port1, USB_PORT_FEAT_RESET);
-		if (status)
+		status = set_port_feature(hub->hdev, port1, (warm ?
+					USB_PORT_FEAT_BH_PORT_RESET :
+					USB_PORT_FEAT_RESET));
+		if (status) {
 			dev_err(hub->intfdev,
-					"cannot reset port %d (err = %d)\n",
-					port1, status);
-		else {
-			status = hub_port_wait_reset(hub, port1, udev, delay);
+					"cannot %sreset port %d (err = %d)\n",
+					warm ? "warm " : "", port1, status);
+		} else {
+			status = hub_port_wait_reset(hub, port1, udev, delay,
+								warm);
 			if (status && status != -ENOTCONN)
 				dev_dbg(hub->intfdev,
 						"port_wait_reset: err = %d\n",
@@ -2116,34 +2215,14 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 		}
 
 		/* return on disconnect or reset */
-		switch (status) {
-		case 0:
-			/* TRSTRCY = 10 ms; plus some extra */
-			msleep(10 + 40);
-			update_devnum(udev, 0);
-			if (hcd->driver->reset_device) {
-				status = hcd->driver->reset_device(hcd, udev);
-				if (status < 0) {
-					dev_err(&udev->dev, "Cannot reset "
-							"HCD device state\n");
-					break;
-				}
-			}
-			/* FALL THROUGH */
-		case -ENOTCONN:
-		case -ENODEV:
-			clear_port_feature(hub->hdev,
-				port1, USB_PORT_FEAT_C_RESET);
-			/* FIXME need disconnect() for NOTATTACHED device */
-			usb_set_device_state(udev, status
-					? USB_STATE_NOTATTACHED
-					: USB_STATE_DEFAULT);
+		if (status == 0 || status == -ENOTCONN || status == -ENODEV) {
+			hub_port_finish_reset(hub, port1, udev, &status, warm);
 			goto done;
 		}
 
 		dev_dbg (hub->intfdev,
-			"port %d not enabled, trying reset again...\n",
-			port1);
+			"port %d not enabled, trying %sreset again...\n",
+			port1, warm ? "warm " : "");
 		delay = HUB_LONG_RESET_TIME;
 	}
 
@@ -2151,45 +2230,11 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 		"Cannot enable port %i.  Maybe the USB cable is bad?\n",
 		port1);
 
- done:
-	up_read(&ehci_cf_port_reset_rwsem);
-	return status;
-}
-
-/* Warm reset a USB3 protocol port */
-static int hub_port_warm_reset(struct usb_hub *hub, int port)
-{
-	int ret;
-	u16 portstatus, portchange;
-
-	if (!hub_is_superspeed(hub->hdev)) {
-		dev_err(hub->intfdev, "only USB3 hub support warm reset\n");
-		return -EINVAL;
-	}
-
-	/* Warm reset the port */
-	ret = set_port_feature(hub->hdev,
-				port, USB_PORT_FEAT_BH_PORT_RESET);
-	if (ret) {
-		dev_err(hub->intfdev, "cannot warm reset port %d\n", port);
-		return ret;
-	}
-
-	msleep(20);
-	ret = hub_port_status(hub, port, &portstatus, &portchange);
-
-	if (portchange & USB_PORT_STAT_C_RESET)
-		clear_port_feature(hub->hdev, port, USB_PORT_FEAT_C_RESET);
-
-	if (portchange & USB_PORT_STAT_C_BH_RESET)
-		clear_port_feature(hub->hdev, port,
-					USB_PORT_FEAT_C_BH_PORT_RESET);
-
-	if (portchange & USB_PORT_STAT_C_LINK_STATE)
-		clear_port_feature(hub->hdev, port,
-					USB_PORT_FEAT_C_PORT_LINK_STATE);
+done:
+	if (!warm)
+		up_read(&ehci_cf_port_reset_rwsem);
 
-	return ret;
+	return status;
 }
 
 /* Check if a port is power on */
@@ -2347,6 +2392,10 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 		}
 	}
 
+	/* disable USB2 hardware LPM */
+	if (udev->usb2_hw_lpm_enabled == 1)
+		usb_set_usb2_hardware_lpm(udev, 0);
+
 	/* see 7.1.7.6 */
 	if (hub_is_superspeed(hub->hdev))
 		status = set_port_feature(hub->hdev,
@@ -2558,7 +2607,12 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 	if (status < 0) {
 		dev_dbg(&udev->dev, "can't resume, status %d\n", status);
 		hub_port_logical_disconnect(hub, port1);
+	} else  {
+		/* Try to enable USB2 hardware LPM */
+		if (udev->usb2_hw_lpm_capable == 1)
+			usb_set_usb2_hardware_lpm(udev, 1);
 	}
+
 	return status;
 }
 
@@ -2798,7 +2852,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	int			i, j, retval;
 	unsigned		delay = HUB_SHORT_RESET_TIME;
 	enum usb_device_speed	oldspeed = udev->speed;
-	char 			*speed, *type;
+	const char		*speed;
 	int			devnum = udev->devnum;
 
 	/* root hub ports have a slightly longer reset period
@@ -2819,7 +2873,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 
 	/* Reset the device; full speed may morph to high speed */
 	/* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
-	retval = hub_port_reset(hub, port1, udev, delay);
+	retval = hub_port_reset(hub, port1, udev, delay, false);
 	if (retval < 0)		/* error or disconnect */
 		goto fail;
 	/* success, speed is known */
@@ -2858,25 +2912,16 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	default:
 		goto fail;
 	}
- 
-	type = "";
-	switch (udev->speed) {
-	case USB_SPEED_LOW:	speed = "low";	break;
-	case USB_SPEED_FULL:	speed = "full";	break;
-	case USB_SPEED_HIGH:	speed = "high";	break;
-	case USB_SPEED_SUPER:
-				speed = "super";
-				break;
-	case USB_SPEED_WIRELESS:
-				speed = "variable";
-				type = "Wireless ";
-				break;
-	default: 		speed = "?";	break;
-	}
+
+	if (udev->speed == USB_SPEED_WIRELESS)
+		speed = "variable speed Wireless";
+	else
+		speed = usb_speed_string(udev->speed);
+
 	if (udev->speed != USB_SPEED_SUPER)
 		dev_info(&udev->dev,
-				"%s %s speed %sUSB device number %d using %s\n",
-				(udev->config) ? "reset" : "new", speed, type,
+				"%s %s USB device number %d using %s\n",
+				(udev->config) ? "reset" : "new", speed,
 				devnum, udev->bus->controller->driver->name);
 
 	/* Set up TT records, if needed  */
@@ -2949,7 +2994,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 					buf->bMaxPacketSize0;
 			kfree(buf);
 
-			retval = hub_port_reset(hub, port1, udev, delay);
+			retval = hub_port_reset(hub, port1, udev, delay, false);
 			if (retval < 0)		/* error or disconnect */
 				goto fail;
 			if (oldspeed != udev->speed) {
@@ -3023,7 +3068,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 		i = 512;
 	else
 		i = udev->descriptor.bMaxPacketSize0;
-	if (le16_to_cpu(udev->ep0.desc.wMaxPacketSize) != i) {
+	if (usb_endpoint_maxp(&udev->ep0.desc) != i) {
 		if (udev->speed == USB_SPEED_LOW ||
 				!(i == 8 || i == 16 || i == 32 || i == 64)) {
 			dev_err(&udev->dev, "Invalid ep0 maxpacket: %d\n", i);
@@ -3047,6 +3092,15 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 		goto fail;
 	}
 
+	if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) {
+		retval = usb_get_bos_descriptor(udev);
+		if (!retval) {
+			if (udev->bos->ext_cap && (USB_LPM_SUPPORT &
+				le32_to_cpu(udev->bos->ext_cap->bmAttributes)))
+					udev->lpm_capable = 1;
+		}
+	}
+
 	retval = 0;
 	/* notify HCD that we have a device connected and addressed */
 	if (hcd->driver->update_device)
@@ -3570,7 +3624,8 @@ static void hub_events(void)
 				(portstatus & USB_PORT_STAT_LINK_STATE)
 					== USB_SS_PORT_LS_SS_INACTIVE) {
 				dev_dbg(hub_dev, "warm reset port %d\n", i);
-				hub_port_warm_reset(hub, i);
+				hub_port_reset(hub, i, NULL,
+						HUB_BH_RESET_TIME, true);
 			}
 
 			if (connect_change)
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 0b5ec23..b3bdfed 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -435,7 +435,7 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
 
 			len = sg->length;
 			if (length) {
-				len = min_t(unsigned, len, length);
+				len = min_t(size_t, len, length);
 				length -= len;
 				if (length == 0)
 					io->entries = i + 1;
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 81ce6a8..d6a8d82 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -38,6 +38,27 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Creative SB Audigy 2 NX */
 	{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Webcam C200 */
+	{ USB_DEVICE(0x046d, 0x0802), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C250 */
+	{ USB_DEVICE(0x046d, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C300 */
+	{ USB_DEVICE(0x046d, 0x0805), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam B/C500 */
+	{ USB_DEVICE(0x046d, 0x0807), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam Pro 9000 */
+	{ USB_DEVICE(0x046d, 0x0809), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C310 */
+	{ USB_DEVICE(0x046d, 0x081b), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C270 */
+	{ USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Harmony 700-series */
 	{ USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },
 
@@ -69,6 +90,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x06a3, 0x0006), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
 
+	/* Guillemot Webcam Hercules Dualpix Exchange*/
+	{ USB_DEVICE(0x06f8, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* M-Systems Flash Disk Pioneers */
 	{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
 
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index cf05b97..662c0cf 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -412,6 +412,56 @@ set_level(struct device *dev, struct device_attribute *attr,
 
 static DEVICE_ATTR(level, S_IRUGO | S_IWUSR, show_level, set_level);
 
+static ssize_t
+show_usb2_hardware_lpm(struct device *dev, struct device_attribute *attr,
+				char *buf)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	const char *p;
+
+	if (udev->usb2_hw_lpm_enabled == 1)
+		p = "enabled";
+	else
+		p = "disabled";
+
+	return sprintf(buf, "%s\n", p);
+}
+
+static ssize_t
+set_usb2_hardware_lpm(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct usb_device *udev = to_usb_device(dev);
+	bool value;
+	int ret;
+
+	usb_lock_device(udev);
+
+	ret = strtobool(buf, &value);
+
+	if (!ret)
+		ret = usb_set_usb2_hardware_lpm(udev, value);
+
+	usb_unlock_device(udev);
+
+	if (!ret)
+		return count;
+
+	return ret;
+}
+
+static DEVICE_ATTR(usb2_hardware_lpm, S_IRUGO | S_IWUSR, show_usb2_hardware_lpm,
+			set_usb2_hardware_lpm);
+
+static struct attribute *usb2_hardware_lpm_attr[] = {
+	&dev_attr_usb2_hardware_lpm.attr,
+	NULL,
+};
+static struct attribute_group usb2_hardware_lpm_attr_group = {
+	.name	= power_group_name,
+	.attrs	= usb2_hardware_lpm_attr,
+};
+
 static struct attribute *power_attrs[] = {
 	&dev_attr_autosuspend.attr,
 	&dev_attr_level.attr,
@@ -428,13 +478,20 @@ static int add_power_attributes(struct device *dev)
 {
 	int rc = 0;
 
-	if (is_usb_device(dev))
+	if (is_usb_device(dev)) {
+		struct usb_device *udev = to_usb_device(dev);
 		rc = sysfs_merge_group(&dev->kobj, &power_attr_group);
+		if (udev->usb2_hw_lpm_capable == 1)
+			rc = sysfs_merge_group(&dev->kobj,
+					&usb2_hardware_lpm_attr_group);
+	}
+
 	return rc;
 }
 
 static void remove_power_attributes(struct device *dev)
 {
+	sysfs_unmerge_group(&dev->kobj, &usb2_hardware_lpm_attr_group);
 	sysfs_unmerge_group(&dev->kobj, &power_attr_group);
 }
 
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index ae334b0..909625b 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -350,7 +350,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 			dev->state < USB_STATE_CONFIGURED)
 		return -ENODEV;
 
-	max = le16_to_cpu(ep->desc.wMaxPacketSize);
+	max = usb_endpoint_maxp(&ep->desc);
 	if (max <= 0) {
 		dev_dbg(&dev->dev,
 			"bogus endpoint ep%d%s in %s (bad maxpacket %d)\n",
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 8706fc9..73cd900 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -225,6 +225,7 @@ static void usb_release_dev(struct device *dev)
 	hcd = bus_to_hcd(udev->bus);
 
 	usb_destroy_configuration(udev);
+	usb_release_bos_descriptor(udev);
 	usb_put_hcd(hcd);
 	kfree(udev->product);
 	kfree(udev->manufacturer);
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index d44d4b7..3888778 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -28,6 +28,8 @@ extern int usb_remove_device(struct usb_device *udev);
 
 extern int usb_get_device_descriptor(struct usb_device *dev,
 		unsigned int size);
+extern int usb_get_bos_descriptor(struct usb_device *dev);
+extern void usb_release_bos_descriptor(struct usb_device *dev);
 extern char *usb_cache_string(struct usb_device *udev, int index);
 extern int usb_set_configuration(struct usb_device *dev, int configuration);
 extern int usb_choose_configuration(struct usb_device *udev);
@@ -80,6 +82,7 @@ extern int usb_remote_wakeup(struct usb_device *dev);
 extern int usb_runtime_suspend(struct device *dev);
 extern int usb_runtime_resume(struct device *dev);
 extern int usb_runtime_idle(struct device *dev);
+extern int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable);
 
 #else
 
@@ -94,6 +97,10 @@ static inline int usb_remote_wakeup(struct usb_device *udev)
 	return 0;
 }
 
+static inline int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable)
+{
+	return 0;
+}
 #endif
 
 extern struct bus_type usb_bus_type;
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
new file mode 100644
index 0000000..3c1d67d
--- /dev/null
+++ b/drivers/usb/dwc3/Kconfig
@@ -0,0 +1,25 @@
+config USB_DWC3
+	tristate "DesignWare USB3 DRD Core Support"
+	depends on (USB || USB_GADGET)
+	select USB_OTG_UTILS
+	help
+	  Say Y or M here if your system has a Dual Role SuperSpeed
+	  USB controller based on the DesignWare USB3 IP Core.
+
+	  If you choose to build this driver is a dynamically linked
+	  module, the module will be called dwc3.ko.
+
+if USB_DWC3
+
+config USB_DWC3_DEBUG
+	bool "Enable Debugging Messages"
+	help
+	  Say Y here to enable debugging messages on DWC3 Driver.
+
+config USB_DWC3_VERBOSE
+	bool "Enable Verbose Debugging Messages"
+	depends on USB_DWC3_DEBUG
+	help
+	  Say Y here to enable verbose debugging messages on DWC3 Driver.
+
+endif
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
new file mode 100644
index 0000000..593d1db
--- /dev/null
+++ b/drivers/usb/dwc3/Makefile
@@ -0,0 +1,36 @@
+ccflags-$(CONFIG_USB_DWC3_DEBUG)	:= -DDEBUG
+ccflags-$(CONFIG_USB_DWC3_VERBOSE)	+= -DVERBOSE_DEBUG
+
+obj-$(CONFIG_USB_DWC3)			+= dwc3.o
+
+dwc3-y					:= core.o
+
+ifneq ($(CONFIG_USB_GADGET_DWC3),)
+	dwc3-y				+= gadget.o ep0.o
+endif
+
+ifneq ($(CONFIG_DEBUG_FS),)
+	dwc3-y				+= debugfs.o
+endif
+
+##
+# Platform-specific glue layers go here
+#
+# NOTICE: Make sure your glue layer doesn't depend on anything
+# which is arch-specific and that it compiles on all situations.
+#
+# We want to keep this requirement in order to be able to compile
+# the entire driver (with all its glue layers) on several architectures
+# and make sure it compiles fine. This will also help with allmodconfig
+# and allyesconfig builds.
+#
+# The only exception is the PCI glue layer, but that's only because
+# PCI doesn't provide nops if CONFIG_PCI isn't enabled.
+##
+
+obj-$(CONFIG_USB_DWC3)		+= dwc3-omap.o
+
+ifneq ($(CONFIG_PCI),)
+	obj-$(CONFIG_USB_DWC3)		+= dwc3-pci.o
+endif
+
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
new file mode 100644
index 0000000..717ebc9
--- /dev/null
+++ b/drivers/usb/dwc3/core.c
@@ -0,0 +1,484 @@
+/**
+ * core.c - DesignWare USB3 DRD Controller Core file
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/module.h>
+
+#include "core.h"
+#include "gadget.h"
+#include "io.h"
+
+#include "debug.h"
+
+/**
+ * dwc3_core_soft_reset - Issues core soft reset and PHY reset
+ * @dwc: pointer to our context structure
+ */
+static void dwc3_core_soft_reset(struct dwc3 *dwc)
+{
+	u32		reg;
+
+	/* Before Resetting PHY, put Core in Reset */
+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+	reg |= DWC3_GCTL_CORESOFTRESET;
+	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+	/* Assert USB3 PHY reset */
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
+	reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST;
+	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+
+	/* Assert USB2 PHY reset */
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+	reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST;
+	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+
+	mdelay(100);
+
+	/* Clear USB3 PHY reset */
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
+	reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST;
+	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+
+	/* Clear USB2 PHY reset */
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+	reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST;
+	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+
+	/* After PHYs are stable we can take Core out of reset state */
+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+	reg &= ~DWC3_GCTL_CORESOFTRESET;
+	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+}
+
+/**
+ * dwc3_free_one_event_buffer - Frees one event buffer
+ * @dwc: Pointer to our controller context structure
+ * @evt: Pointer to event buffer to be freed
+ */
+static void dwc3_free_one_event_buffer(struct dwc3 *dwc,
+		struct dwc3_event_buffer *evt)
+{
+	dma_free_coherent(dwc->dev, evt->length, evt->buf, evt->dma);
+	kfree(evt);
+}
+
+/**
+ * dwc3_alloc_one_event_buffer - Allocated one event buffer structure
+ * @dwc: Pointer to our controller context structure
+ * @length: size of the event buffer
+ *
+ * Returns a pointer to the allocated event buffer structure on succes
+ * otherwise ERR_PTR(errno).
+ */
+static struct dwc3_event_buffer *__devinit
+dwc3_alloc_one_event_buffer(struct dwc3 *dwc, unsigned length)
+{
+	struct dwc3_event_buffer	*evt;
+
+	evt = kzalloc(sizeof(*evt), GFP_KERNEL);
+	if (!evt)
+		return ERR_PTR(-ENOMEM);
+
+	evt->dwc	= dwc;
+	evt->length	= length;
+	evt->buf	= dma_alloc_coherent(dwc->dev, length,
+			&evt->dma, GFP_KERNEL);
+	if (!evt->buf) {
+		kfree(evt);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	return evt;
+}
+
+/**
+ * dwc3_free_event_buffers - frees all allocated event buffers
+ * @dwc: Pointer to our controller context structure
+ */
+static void dwc3_free_event_buffers(struct dwc3 *dwc)
+{
+	struct dwc3_event_buffer	*evt;
+	int i;
+
+	for (i = 0; i < DWC3_EVENT_BUFFERS_NUM; i++) {
+		evt = dwc->ev_buffs[i];
+		if (evt) {
+			dwc3_free_one_event_buffer(dwc, evt);
+			dwc->ev_buffs[i] = NULL;
+		}
+	}
+}
+
+/**
+ * dwc3_alloc_event_buffers - Allocates @num event buffers of size @length
+ * @dwc: Pointer to out controller context structure
+ * @num: number of event buffers to allocate
+ * @length: size of event buffer
+ *
+ * Returns 0 on success otherwise negative errno. In error the case, dwc
+ * may contain some buffers allocated but not all which were requested.
+ */
+static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned num,
+		unsigned length)
+{
+	int			i;
+
+	for (i = 0; i < num; i++) {
+		struct dwc3_event_buffer	*evt;
+
+		evt = dwc3_alloc_one_event_buffer(dwc, length);
+		if (IS_ERR(evt)) {
+			dev_err(dwc->dev, "can't allocate event buffer\n");
+			return PTR_ERR(evt);
+		}
+		dwc->ev_buffs[i] = evt;
+	}
+
+	return 0;
+}
+
+/**
+ * dwc3_event_buffers_setup - setup our allocated event buffers
+ * @dwc: Pointer to out controller context structure
+ *
+ * Returns 0 on success otherwise negative errno.
+ */
+static int __devinit dwc3_event_buffers_setup(struct dwc3 *dwc)
+{
+	struct dwc3_event_buffer	*evt;
+	int				n;
+
+	for (n = 0; n < DWC3_EVENT_BUFFERS_NUM; n++) {
+		evt = dwc->ev_buffs[n];
+		dev_dbg(dwc->dev, "Event buf %p dma %08llx length %d\n",
+				evt->buf, (unsigned long long) evt->dma,
+				evt->length);
+
+		dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n),
+				lower_32_bits(evt->dma));
+		dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n),
+				upper_32_bits(evt->dma));
+		dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n),
+				evt->length & 0xffff);
+		dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0);
+	}
+
+	return 0;
+}
+
+static void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
+{
+	struct dwc3_event_buffer	*evt;
+	int				n;
+
+	for (n = 0; n < DWC3_EVENT_BUFFERS_NUM; n++) {
+		evt = dwc->ev_buffs[n];
+		dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 0);
+		dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 0);
+		dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), 0);
+		dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0);
+	}
+}
+
+static void __devinit dwc3_cache_hwparams(struct dwc3 *dwc)
+{
+	struct dwc3_hwparams	*parms = &dwc->hwparams;
+
+	parms->hwparams0 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS0);
+	parms->hwparams1 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS1);
+	parms->hwparams2 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS2);
+	parms->hwparams3 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS3);
+	parms->hwparams4 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS4);
+	parms->hwparams5 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS5);
+	parms->hwparams6 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS6);
+	parms->hwparams7 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS7);
+	parms->hwparams8 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS8);
+}
+
+/**
+ * dwc3_core_init - Low-level initialization of DWC3 Core
+ * @dwc: Pointer to our controller context structure
+ *
+ * Returns 0 on success otherwise negative errno.
+ */
+static int __devinit dwc3_core_init(struct dwc3 *dwc)
+{
+	unsigned long		timeout;
+	u32			reg;
+	int			ret;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GSNPSID);
+	/* This should read as U3 followed by revision number */
+	if ((reg & DWC3_GSNPSID_MASK) != 0x55330000) {
+		dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
+		ret = -ENODEV;
+		goto err0;
+	}
+	dwc->revision = reg & DWC3_GSNPSREV_MASK;
+
+	dwc3_core_soft_reset(dwc);
+
+	/* issue device SoftReset too */
+	timeout = jiffies + msecs_to_jiffies(500);
+	dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST);
+	do {
+		reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+		if (!(reg & DWC3_DCTL_CSFTRST))
+			break;
+
+		if (time_after(jiffies, timeout)) {
+			dev_err(dwc->dev, "Reset Timed Out\n");
+			ret = -ETIMEDOUT;
+			goto err0;
+		}
+
+		cpu_relax();
+	} while (true);
+
+	ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_NUM,
+			DWC3_EVENT_BUFFERS_SIZE);
+	if (ret) {
+		dev_err(dwc->dev, "failed to allocate event buffers\n");
+		ret = -ENOMEM;
+		goto err1;
+	}
+
+	ret = dwc3_event_buffers_setup(dwc);
+	if (ret) {
+		dev_err(dwc->dev, "failed to setup event buffers\n");
+		goto err1;
+	}
+
+	dwc3_cache_hwparams(dwc);
+
+	return 0;
+
+err1:
+	dwc3_free_event_buffers(dwc);
+
+err0:
+	return ret;
+}
+
+static void dwc3_core_exit(struct dwc3 *dwc)
+{
+	dwc3_event_buffers_cleanup(dwc);
+	dwc3_free_event_buffers(dwc);
+}
+
+#define DWC3_ALIGN_MASK		(16 - 1)
+
+static int __devinit dwc3_probe(struct platform_device *pdev)
+{
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	struct resource		*res;
+	struct dwc3		*dwc;
+	void __iomem		*regs;
+	unsigned int		features = id->driver_data;
+	int			ret = -ENOMEM;
+	int			irq;
+	void			*mem;
+
+	mem = kzalloc(sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL);
+	if (!mem) {
+		dev_err(&pdev->dev, "not enough memory\n");
+		goto err0;
+	}
+	dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1);
+	dwc->mem = mem;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "missing resource\n");
+		goto err1;
+	}
+
+	res = request_mem_region(res->start, resource_size(res),
+			dev_name(&pdev->dev));
+	if (!res) {
+		dev_err(&pdev->dev, "can't request mem region\n");
+		goto err1;
+	}
+
+	regs = ioremap(res->start, resource_size(res));
+	if (!regs) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		goto err2;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "missing IRQ\n");
+		goto err3;
+	}
+
+	spin_lock_init(&dwc->lock);
+	platform_set_drvdata(pdev, dwc);
+
+	dwc->regs	= regs;
+	dwc->regs_size	= resource_size(res);
+	dwc->dev	= &pdev->dev;
+	dwc->irq	= irq;
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+	pm_runtime_forbid(&pdev->dev);
+
+	ret = dwc3_core_init(dwc);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize core\n");
+		goto err3;
+	}
+
+	if (features & DWC3_HAS_PERIPHERAL) {
+		ret = dwc3_gadget_init(dwc);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to initialized gadget\n");
+			goto err4;
+		}
+	}
+
+	ret = dwc3_debugfs_init(dwc);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize debugfs\n");
+		goto err5;
+	}
+
+	pm_runtime_allow(&pdev->dev);
+
+	return 0;
+
+err5:
+	if (features & DWC3_HAS_PERIPHERAL)
+		dwc3_gadget_exit(dwc);
+
+err4:
+	dwc3_core_exit(dwc);
+
+err3:
+	iounmap(regs);
+
+err2:
+	release_mem_region(res->start, resource_size(res));
+
+err1:
+	kfree(dwc->mem);
+
+err0:
+	return ret;
+}
+
+static int __devexit dwc3_remove(struct platform_device *pdev)
+{
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	struct dwc3	*dwc = platform_get_drvdata(pdev);
+	struct resource	*res;
+	unsigned int	features = id->driver_data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	dwc3_debugfs_exit(dwc);
+
+	if (features & DWC3_HAS_PERIPHERAL)
+		dwc3_gadget_exit(dwc);
+
+	dwc3_core_exit(dwc);
+	release_mem_region(res->start, resource_size(res));
+	iounmap(dwc->regs);
+	kfree(dwc->mem);
+
+	return 0;
+}
+
+static const struct platform_device_id dwc3_id_table[] __devinitconst = {
+	{
+		.name	= "dwc3-omap",
+		.driver_data = (DWC3_HAS_PERIPHERAL
+			| DWC3_HAS_XHCI
+			| DWC3_HAS_OTG),
+	},
+	{
+		.name	= "dwc3-pci",
+		.driver_data = DWC3_HAS_PERIPHERAL,
+	},
+	{  },	/* Terminating Entry */
+};
+MODULE_DEVICE_TABLE(platform, dwc3_id_table);
+
+static struct platform_driver dwc3_driver = {
+	.probe		= dwc3_probe,
+	.remove		= __devexit_p(dwc3_remove),
+	.driver		= {
+		.name	= "dwc3",
+	},
+	.id_table	= dwc3_id_table,
+};
+
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_DESCRIPTION("DesignWare USB3 DRD Controller Driver");
+
+static int __devinit dwc3_init(void)
+{
+	return platform_driver_register(&dwc3_driver);
+}
+module_init(dwc3_init);
+
+static void __exit dwc3_exit(void)
+{
+	platform_driver_unregister(&dwc3_driver);
+}
+module_exit(dwc3_exit);
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
new file mode 100644
index 0000000..29a8e16
--- /dev/null
+++ b/drivers/usb/dwc3/core.h
@@ -0,0 +1,768 @@
+/**
+ * core.h - DesignWare USB3 DRD Core Header
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __DRIVERS_USB_DWC3_CORE_H
+#define __DRIVERS_USB_DWC3_CORE_H
+
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/debugfs.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/* Global constants */
+#define DWC3_ENDPOINTS_NUM	32
+
+#define DWC3_EVENT_BUFFERS_NUM	2
+#define DWC3_EVENT_BUFFERS_SIZE	PAGE_SIZE
+#define DWC3_EVENT_TYPE_MASK	0xfe
+
+#define DWC3_EVENT_TYPE_DEV	0
+#define DWC3_EVENT_TYPE_CARKIT	3
+#define DWC3_EVENT_TYPE_I2C	4
+
+#define DWC3_DEVICE_EVENT_DISCONNECT		0
+#define DWC3_DEVICE_EVENT_RESET			1
+#define DWC3_DEVICE_EVENT_CONNECT_DONE		2
+#define DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE	3
+#define DWC3_DEVICE_EVENT_WAKEUP		4
+#define DWC3_DEVICE_EVENT_EOPF			6
+#define DWC3_DEVICE_EVENT_SOF			7
+#define DWC3_DEVICE_EVENT_ERRATIC_ERROR		9
+#define DWC3_DEVICE_EVENT_CMD_CMPL		10
+#define DWC3_DEVICE_EVENT_OVERFLOW		11
+
+#define DWC3_GEVNTCOUNT_MASK	0xfffc
+#define DWC3_GSNPSID_MASK	0xffff0000
+#define DWC3_GSNPSREV_MASK	0xffff
+
+/* Global Registers */
+#define DWC3_GSBUSCFG0		0xc100
+#define DWC3_GSBUSCFG1		0xc104
+#define DWC3_GTXTHRCFG		0xc108
+#define DWC3_GRXTHRCFG		0xc10c
+#define DWC3_GCTL		0xc110
+#define DWC3_GEVTEN		0xc114
+#define DWC3_GSTS		0xc118
+#define DWC3_GSNPSID		0xc120
+#define DWC3_GGPIO		0xc124
+#define DWC3_GUID		0xc128
+#define DWC3_GUCTL		0xc12c
+#define DWC3_GBUSERRADDR0	0xc130
+#define DWC3_GBUSERRADDR1	0xc134
+#define DWC3_GPRTBIMAP0		0xc138
+#define DWC3_GPRTBIMAP1		0xc13c
+#define DWC3_GHWPARAMS0		0xc140
+#define DWC3_GHWPARAMS1		0xc144
+#define DWC3_GHWPARAMS2		0xc148
+#define DWC3_GHWPARAMS3		0xc14c
+#define DWC3_GHWPARAMS4		0xc150
+#define DWC3_GHWPARAMS5		0xc154
+#define DWC3_GHWPARAMS6		0xc158
+#define DWC3_GHWPARAMS7		0xc15c
+#define DWC3_GDBGFIFOSPACE	0xc160
+#define DWC3_GDBGLTSSM		0xc164
+#define DWC3_GPRTBIMAP_HS0	0xc180
+#define DWC3_GPRTBIMAP_HS1	0xc184
+#define DWC3_GPRTBIMAP_FS0	0xc188
+#define DWC3_GPRTBIMAP_FS1	0xc18c
+
+#define DWC3_GUSB2PHYCFG(n)	(0xc200 + (n * 0x04))
+#define DWC3_GUSB2I2CCTL(n)	(0xc240 + (n * 0x04))
+
+#define DWC3_GUSB2PHYACC(n)	(0xc280 + (n * 0x04))
+
+#define DWC3_GUSB3PIPECTL(n)	(0xc2c0 + (n * 0x04))
+
+#define DWC3_GTXFIFOSIZ(n)	(0xc300 + (n * 0x04))
+#define DWC3_GRXFIFOSIZ(n)	(0xc380 + (n * 0x04))
+
+#define DWC3_GEVNTADRLO(n)	(0xc400 + (n * 0x10))
+#define DWC3_GEVNTADRHI(n)	(0xc404 + (n * 0x10))
+#define DWC3_GEVNTSIZ(n)	(0xc408 + (n * 0x10))
+#define DWC3_GEVNTCOUNT(n)	(0xc40c + (n * 0x10))
+
+#define DWC3_GHWPARAMS8		0xc600
+
+/* Device Registers */
+#define DWC3_DCFG		0xc700
+#define DWC3_DCTL		0xc704
+#define DWC3_DEVTEN		0xc708
+#define DWC3_DSTS		0xc70c
+#define DWC3_DGCMDPAR		0xc710
+#define DWC3_DGCMD		0xc714
+#define DWC3_DALEPENA		0xc720
+#define DWC3_DEPCMDPAR2(n)	(0xc800 + (n * 0x10))
+#define DWC3_DEPCMDPAR1(n)	(0xc804 + (n * 0x10))
+#define DWC3_DEPCMDPAR0(n)	(0xc808 + (n * 0x10))
+#define DWC3_DEPCMD(n)		(0xc80c + (n * 0x10))
+
+/* OTG Registers */
+#define DWC3_OCFG		0xcc00
+#define DWC3_OCTL		0xcc04
+#define DWC3_OEVTEN		0xcc08
+#define DWC3_OSTS		0xcc0C
+
+/* Bit fields */
+
+/* Global Configuration Register */
+#define DWC3_GCTL_PWRDNSCALE(n)	(n << 19)
+#define DWC3_GCTL_U2RSTECN	(1 << 16)
+#define DWC3_GCTL_RAMCLKSEL(x)	((x & DWC3_GCTL_CLK_MASK) << 6)
+#define DWC3_GCTL_CLK_BUS	(0)
+#define DWC3_GCTL_CLK_PIPE	(1)
+#define DWC3_GCTL_CLK_PIPEHALF	(2)
+#define DWC3_GCTL_CLK_MASK	(3)
+
+#define DWC3_GCTL_PRTCAPDIR(n)	(n << 12)
+#define DWC3_GCTL_PRTCAP_HOST	1
+#define DWC3_GCTL_PRTCAP_DEVICE	2
+#define DWC3_GCTL_PRTCAP_OTG	3
+
+#define DWC3_GCTL_CORESOFTRESET	(1 << 11)
+#define DWC3_GCTL_SCALEDOWN(n)	(n << 4)
+#define DWC3_GCTL_DISSCRAMBLE	(1 << 3)
+#define DWC3_GCTL_DSBLCLKGTNG	(1 << 0)
+
+/* Global USB2 PHY Configuration Register */
+#define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31)
+#define DWC3_GUSB2PHYCFG_SUSPHY	(1 << 6)
+
+/* Global USB3 PIPE Control Register */
+#define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31)
+#define DWC3_GUSB3PIPECTL_SUSPHY (1 << 17)
+
+/* Global HWPARAMS1 Register */
+#define DWC3_GHWPARAMS1_EN_PWROPT(n)	((n & (3 << 24)) >> 24)
+#define DWC3_GHWPARAMS1_EN_PWROPT_NO	0
+#define DWC3_GHWPARAMS1_EN_PWROPT_CLK	1
+
+/* Device Configuration Register */
+#define DWC3_DCFG_DEVADDR(addr)	((addr) << 3)
+#define DWC3_DCFG_DEVADDR_MASK	DWC3_DCFG_DEVADDR(0x7f)
+
+#define DWC3_DCFG_SPEED_MASK	(7 << 0)
+#define DWC3_DCFG_SUPERSPEED	(4 << 0)
+#define DWC3_DCFG_HIGHSPEED	(0 << 0)
+#define DWC3_DCFG_FULLSPEED2	(1 << 0)
+#define DWC3_DCFG_LOWSPEED	(2 << 0)
+#define DWC3_DCFG_FULLSPEED1	(3 << 0)
+
+/* Device Control Register */
+#define DWC3_DCTL_RUN_STOP	(1 << 31)
+#define DWC3_DCTL_CSFTRST	(1 << 30)
+#define DWC3_DCTL_LSFTRST	(1 << 29)
+
+#define DWC3_DCTL_HIRD_THRES_MASK	(0x1f << 24)
+#define DWC3_DCTL_HIRD_THRES(n)	(((n) & DWC3_DCTL_HIRD_THRES_MASK) >> 24)
+
+#define DWC3_DCTL_APPL1RES	(1 << 23)
+
+#define DWC3_DCTL_INITU2ENA	(1 << 12)
+#define DWC3_DCTL_ACCEPTU2ENA	(1 << 11)
+#define DWC3_DCTL_INITU1ENA	(1 << 10)
+#define DWC3_DCTL_ACCEPTU1ENA	(1 << 9)
+#define DWC3_DCTL_TSTCTRL_MASK	(0xf << 1)
+
+#define DWC3_DCTL_ULSTCHNGREQ_MASK	(0x0f << 5)
+#define DWC3_DCTL_ULSTCHNGREQ(n) (((n) << 5) & DWC3_DCTL_ULSTCHNGREQ_MASK)
+
+#define DWC3_DCTL_ULSTCHNG_NO_ACTION	(DWC3_DCTL_ULSTCHNGREQ(0))
+#define DWC3_DCTL_ULSTCHNG_SS_DISABLED	(DWC3_DCTL_ULSTCHNGREQ(4))
+#define DWC3_DCTL_ULSTCHNG_RX_DETECT	(DWC3_DCTL_ULSTCHNGREQ(5))
+#define DWC3_DCTL_ULSTCHNG_SS_INACTIVE	(DWC3_DCTL_ULSTCHNGREQ(6))
+#define DWC3_DCTL_ULSTCHNG_RECOVERY	(DWC3_DCTL_ULSTCHNGREQ(8))
+#define DWC3_DCTL_ULSTCHNG_COMPLIANCE	(DWC3_DCTL_ULSTCHNGREQ(10))
+#define DWC3_DCTL_ULSTCHNG_LOOPBACK	(DWC3_DCTL_ULSTCHNGREQ(11))
+
+/* Device Event Enable Register */
+#define DWC3_DEVTEN_VNDRDEVTSTRCVEDEN	(1 << 12)
+#define DWC3_DEVTEN_EVNTOVERFLOWEN	(1 << 11)
+#define DWC3_DEVTEN_CMDCMPLTEN		(1 << 10)
+#define DWC3_DEVTEN_ERRTICERREN		(1 << 9)
+#define DWC3_DEVTEN_SOFEN		(1 << 7)
+#define DWC3_DEVTEN_EOPFEN		(1 << 6)
+#define DWC3_DEVTEN_WKUPEVTEN		(1 << 4)
+#define DWC3_DEVTEN_ULSTCNGEN		(1 << 3)
+#define DWC3_DEVTEN_CONNECTDONEEN	(1 << 2)
+#define DWC3_DEVTEN_USBRSTEN		(1 << 1)
+#define DWC3_DEVTEN_DISCONNEVTEN	(1 << 0)
+
+/* Device Status Register */
+#define DWC3_DSTS_PWRUPREQ		(1 << 24)
+#define DWC3_DSTS_COREIDLE		(1 << 23)
+#define DWC3_DSTS_DEVCTRLHLT		(1 << 22)
+
+#define DWC3_DSTS_USBLNKST_MASK		(0x0f << 18)
+#define DWC3_DSTS_USBLNKST(n)		(((n) & DWC3_DSTS_USBLNKST_MASK) >> 18)
+
+#define DWC3_DSTS_RXFIFOEMPTY		(1 << 17)
+
+#define DWC3_DSTS_SOFFN_MASK		(0x3ff << 3)
+#define DWC3_DSTS_SOFFN(n)		(((n) & DWC3_DSTS_SOFFN_MASK) >> 3)
+
+#define DWC3_DSTS_CONNECTSPD		(7 << 0)
+
+#define DWC3_DSTS_SUPERSPEED		(4 << 0)
+#define DWC3_DSTS_HIGHSPEED		(0 << 0)
+#define DWC3_DSTS_FULLSPEED2		(1 << 0)
+#define DWC3_DSTS_LOWSPEED		(2 << 0)
+#define DWC3_DSTS_FULLSPEED1		(3 << 0)
+
+/* Device Generic Command Register */
+#define DWC3_DGCMD_SET_LMP		0x01
+#define DWC3_DGCMD_SET_PERIODIC_PAR	0x02
+#define DWC3_DGCMD_XMIT_FUNCTION	0x03
+#define DWC3_DGCMD_SELECTED_FIFO_FLUSH	0x09
+#define DWC3_DGCMD_ALL_FIFO_FLUSH	0x0a
+#define DWC3_DGCMD_SET_ENDPOINT_NRDY	0x0c
+#define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK	0x10
+
+/* Device Endpoint Command Register */
+#define DWC3_DEPCMD_PARAM_SHIFT		16
+#define DWC3_DEPCMD_PARAM(x)		(x << DWC3_DEPCMD_PARAM_SHIFT)
+#define DWC3_DEPCMD_GET_RSC_IDX(x)	((x >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
+#define DWC3_DEPCMD_STATUS_MASK		(0x0f << 12)
+#define DWC3_DEPCMD_STATUS(x)		((x & DWC3_DEPCMD_STATUS_MASK) >> 12)
+#define DWC3_DEPCMD_HIPRI_FORCERM	(1 << 11)
+#define DWC3_DEPCMD_CMDACT		(1 << 10)
+#define DWC3_DEPCMD_CMDIOC		(1 << 8)
+
+#define DWC3_DEPCMD_DEPSTARTCFG		(0x09 << 0)
+#define DWC3_DEPCMD_ENDTRANSFER		(0x08 << 0)
+#define DWC3_DEPCMD_UPDATETRANSFER	(0x07 << 0)
+#define DWC3_DEPCMD_STARTTRANSFER	(0x06 << 0)
+#define DWC3_DEPCMD_CLEARSTALL		(0x05 << 0)
+#define DWC3_DEPCMD_SETSTALL		(0x04 << 0)
+#define DWC3_DEPCMD_GETSEQNUMBER	(0x03 << 0)
+#define DWC3_DEPCMD_SETTRANSFRESOURCE	(0x02 << 0)
+#define DWC3_DEPCMD_SETEPCONFIG		(0x01 << 0)
+
+/* The EP number goes 0..31 so ep0 is always out and ep1 is always in */
+#define DWC3_DALEPENA_EP(n)		(1 << n)
+
+#define DWC3_DEPCMD_TYPE_CONTROL	0
+#define DWC3_DEPCMD_TYPE_ISOC		1
+#define DWC3_DEPCMD_TYPE_BULK		2
+#define DWC3_DEPCMD_TYPE_INTR		3
+
+/* Structures */
+
+struct dwc3_trb_hw;
+
+/**
+ * struct dwc3_event_buffer - Software event buffer representation
+ * @list: a list of event buffers
+ * @buf: _THE_ buffer
+ * @length: size of this buffer
+ * @dma: dma_addr_t
+ * @dwc: pointer to DWC controller
+ */
+struct dwc3_event_buffer {
+	void			*buf;
+	unsigned		length;
+	unsigned int		lpos;
+
+	dma_addr_t		dma;
+
+	struct dwc3		*dwc;
+};
+
+#define DWC3_EP_FLAG_STALLED	(1 << 0)
+#define DWC3_EP_FLAG_WEDGED	(1 << 1)
+
+#define DWC3_EP_DIRECTION_TX	true
+#define DWC3_EP_DIRECTION_RX	false
+
+#define DWC3_TRB_NUM		32
+#define DWC3_TRB_MASK		(DWC3_TRB_NUM - 1)
+
+/**
+ * struct dwc3_ep - device side endpoint representation
+ * @endpoint: usb endpoint
+ * @request_list: list of requests for this endpoint
+ * @req_queued: list of requests on this ep which have TRBs setup
+ * @trb_pool: array of transaction buffers
+ * @trb_pool_dma: dma address of @trb_pool
+ * @free_slot: next slot which is going to be used
+ * @busy_slot: first slot which is owned by HW
+ * @desc: usb_endpoint_descriptor pointer
+ * @dwc: pointer to DWC controller
+ * @flags: endpoint flags (wedged, stalled, ...)
+ * @current_trb: index of current used trb
+ * @number: endpoint number (1 - 15)
+ * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK
+ * @res_trans_idx: Resource transfer index
+ * @interval: the intervall on which the ISOC transfer is started
+ * @name: a human readable name e.g. ep1out-bulk
+ * @direction: true for TX, false for RX
+ * @stream_capable: true when streams are enabled
+ */
+struct dwc3_ep {
+	struct usb_ep		endpoint;
+	struct list_head	request_list;
+	struct list_head	req_queued;
+
+	struct dwc3_trb_hw	*trb_pool;
+	dma_addr_t		trb_pool_dma;
+	u32			free_slot;
+	u32			busy_slot;
+	const struct usb_endpoint_descriptor *desc;
+	struct dwc3		*dwc;
+
+	unsigned		flags;
+#define DWC3_EP_ENABLED		(1 << 0)
+#define DWC3_EP_STALL		(1 << 1)
+#define DWC3_EP_WEDGE		(1 << 2)
+#define DWC3_EP_BUSY		(1 << 4)
+#define DWC3_EP_PENDING_REQUEST	(1 << 5)
+
+	/* This last one is specific to EP0 */
+#define DWC3_EP0_DIR_IN		(1 << 31)
+
+	unsigned		current_trb;
+
+	u8			number;
+	u8			type;
+	u8			res_trans_idx;
+	u32			interval;
+
+	char			name[20];
+
+	unsigned		direction:1;
+	unsigned		stream_capable:1;
+};
+
+enum dwc3_phy {
+	DWC3_PHY_UNKNOWN = 0,
+	DWC3_PHY_USB3,
+	DWC3_PHY_USB2,
+};
+
+enum dwc3_ep0_next {
+	DWC3_EP0_UNKNOWN = 0,
+	DWC3_EP0_COMPLETE,
+	DWC3_EP0_NRDY_SETUP,
+	DWC3_EP0_NRDY_DATA,
+	DWC3_EP0_NRDY_STATUS,
+};
+
+enum dwc3_ep0_state {
+	EP0_UNCONNECTED		= 0,
+	EP0_SETUP_PHASE,
+	EP0_DATA_PHASE,
+	EP0_STATUS_PHASE,
+};
+
+enum dwc3_link_state {
+	/* In SuperSpeed */
+	DWC3_LINK_STATE_U0		= 0x00, /* in HS, means ON */
+	DWC3_LINK_STATE_U1		= 0x01,
+	DWC3_LINK_STATE_U2		= 0x02, /* in HS, means SLEEP */
+	DWC3_LINK_STATE_U3		= 0x03, /* in HS, means SUSPEND */
+	DWC3_LINK_STATE_SS_DIS		= 0x04,
+	DWC3_LINK_STATE_RX_DET		= 0x05, /* in HS, means Early Suspend */
+	DWC3_LINK_STATE_SS_INACT	= 0x06,
+	DWC3_LINK_STATE_POLL		= 0x07,
+	DWC3_LINK_STATE_RECOV		= 0x08,
+	DWC3_LINK_STATE_HRESET		= 0x09,
+	DWC3_LINK_STATE_CMPLY		= 0x0a,
+	DWC3_LINK_STATE_LPBK		= 0x0b,
+	DWC3_LINK_STATE_MASK		= 0x0f,
+};
+
+enum dwc3_device_state {
+	DWC3_DEFAULT_STATE,
+	DWC3_ADDRESS_STATE,
+	DWC3_CONFIGURED_STATE,
+};
+
+/**
+ * struct dwc3_trb - transfer request block
+ * @bpl: lower 32bit of the buffer
+ * @bph: higher 32bit of the buffer
+ * @length: buffer size (up to 16mb - 1)
+ * @pcm1: packet count m1
+ * @trbsts: trb status
+ *	0 = ok
+ *	1 = missed isoc
+ *	2 = setup pending
+ * @hwo: hardware owner of descriptor
+ * @lst: last trb
+ * @chn: chain buffers
+ * @csp: continue on short packets (only supported on isoc eps)
+ * @trbctl: trb control
+ *	1 = normal
+ *	2 = control-setup
+ *	3 = control-status-2
+ *	4 = control-status-3
+ *	5 = control-data (first trb of data stage)
+ *	6 = isochronous-first (first trb of service interval)
+ *	7 = isochronous
+ *	8 = link trb
+ *	others = reserved
+ * @isp_imi: interrupt on short packet / interrupt on missed isoc
+ * @ioc: interrupt on complete
+ * @sid_sofn: Stream ID / SOF Number
+ */
+struct dwc3_trb {
+	u64             bplh;
+
+	union {
+		struct {
+			u32             length:24;
+			u32             pcm1:2;
+			u32             reserved27_26:2;
+			u32             trbsts:4;
+#define DWC3_TRB_STS_OKAY                       0
+#define DWC3_TRB_STS_MISSED_ISOC                1
+#define DWC3_TRB_STS_SETUP_PENDING              2
+		};
+		u32 len_pcm;
+	};
+
+	union {
+		struct {
+			u32             hwo:1;
+			u32             lst:1;
+			u32             chn:1;
+			u32             csp:1;
+			u32             trbctl:6;
+			u32             isp_imi:1;
+			u32             ioc:1;
+			u32             reserved13_12:2;
+			u32             sid_sofn:16;
+			u32             reserved31_30:2;
+		};
+		u32 control;
+	};
+} __packed;
+
+/**
+ * struct dwc3_trb_hw - transfer request block (hw format)
+ * @bpl: DW0-3
+ * @bph: DW4-7
+ * @size: DW8-B
+ * @trl: DWC-F
+ */
+struct dwc3_trb_hw {
+	__le32		bpl;
+	__le32		bph;
+	__le32		size;
+	__le32		ctrl;
+} __packed;
+
+static inline void dwc3_trb_to_hw(struct dwc3_trb *nat, struct dwc3_trb_hw *hw)
+{
+	hw->bpl = cpu_to_le32(lower_32_bits(nat->bplh));
+	hw->bph = cpu_to_le32(upper_32_bits(nat->bplh));
+	hw->size = cpu_to_le32p(&nat->len_pcm);
+	/* HWO is written last */
+	hw->ctrl = cpu_to_le32p(&nat->control);
+}
+
+static inline void dwc3_trb_to_nat(struct dwc3_trb_hw *hw, struct dwc3_trb *nat)
+{
+	u64 bplh;
+
+	bplh = le32_to_cpup(&hw->bpl);
+	bplh |= (u64) le32_to_cpup(&hw->bph) << 32;
+	nat->bplh = bplh;
+
+	nat->len_pcm = le32_to_cpup(&hw->size);
+	nat->control = le32_to_cpup(&hw->ctrl);
+}
+
+/**
+ * dwc3_hwparams - copy of HWPARAMS registers
+ * @hwparams0 - GHWPARAMS0
+ * @hwparams1 - GHWPARAMS1
+ * @hwparams2 - GHWPARAMS2
+ * @hwparams3 - GHWPARAMS3
+ * @hwparams4 - GHWPARAMS4
+ * @hwparams5 - GHWPARAMS5
+ * @hwparams6 - GHWPARAMS6
+ * @hwparams7 - GHWPARAMS7
+ * @hwparams8 - GHWPARAMS8
+ */
+struct dwc3_hwparams {
+	u32	hwparams0;
+	u32	hwparams1;
+	u32	hwparams2;
+	u32	hwparams3;
+	u32	hwparams4;
+	u32	hwparams5;
+	u32	hwparams6;
+	u32	hwparams7;
+	u32	hwparams8;
+};
+
+/**
+ * struct dwc3 - representation of our controller
+ * @ctrl_req: usb control request which is used for ep0
+ * @ep0_trb: trb which is used for the ctrl_req
+ * @ep0_bounce: bounce buffer for ep0
+ * @setup_buf: used while precessing STD USB requests
+ * @ctrl_req_addr: dma address of ctrl_req
+ * @ep0_trb: dma address of ep0_trb
+ * @ep0_usb_req: dummy req used while handling STD USB requests
+ * @setup_buf_addr: dma address of setup_buf
+ * @ep0_bounce_addr: dma address of ep0_bounce
+ * @lock: for synchronizing
+ * @dev: pointer to our struct device
+ * @event_buffer_list: a list of event buffers
+ * @gadget: device side representation of the peripheral controller
+ * @gadget_driver: pointer to the gadget driver
+ * @regs: base address for our registers
+ * @regs_size: address space size
+ * @irq: IRQ number
+ * @revision: revision register contents
+ * @is_selfpowered: true when we are selfpowered
+ * @three_stage_setup: set if we perform a three phase setup
+ * @ep0_status_pending: ep0 status response without a req is pending
+ * @ep0_bounced: true when we used bounce buffer
+ * @ep0_expect_in: true when we expect a DATA IN transfer
+ * @start_config_issued: true when StartConfig command has been issued
+ * @ep0_next_event: hold the next expected event
+ * @ep0state: state of endpoint zero
+ * @link_state: link state
+ * @speed: device speed (super, high, full, low)
+ * @mem: points to start of memory which is used for this struct.
+ * @hwparams: copy of hwparams registers
+ * @root: debugfs root folder pointer
+ */
+struct dwc3 {
+	struct usb_ctrlrequest	*ctrl_req;
+	struct dwc3_trb_hw	*ep0_trb;
+	void			*ep0_bounce;
+	u8			*setup_buf;
+	dma_addr_t		ctrl_req_addr;
+	dma_addr_t		ep0_trb_addr;
+	dma_addr_t		setup_buf_addr;
+	dma_addr_t		ep0_bounce_addr;
+	struct usb_request	ep0_usb_req;
+	/* device lock */
+	spinlock_t		lock;
+	struct device		*dev;
+
+	struct dwc3_event_buffer *ev_buffs[DWC3_EVENT_BUFFERS_NUM];
+	struct dwc3_ep		*eps[DWC3_ENDPOINTS_NUM];
+
+	struct usb_gadget	gadget;
+	struct usb_gadget_driver *gadget_driver;
+
+	void __iomem		*regs;
+	size_t			regs_size;
+
+	int			irq;
+
+	u32			revision;
+
+#define DWC3_REVISION_173A	0x5533173a
+#define DWC3_REVISION_175A	0x5533175a
+#define DWC3_REVISION_180A	0x5533180a
+#define DWC3_REVISION_183A	0x5533183a
+#define DWC3_REVISION_185A	0x5533185a
+#define DWC3_REVISION_188A	0x5533188a
+#define DWC3_REVISION_190A	0x5533190a
+
+	unsigned		is_selfpowered:1;
+	unsigned		three_stage_setup:1;
+	unsigned		ep0_status_pending:1;
+	unsigned		ep0_bounced:1;
+	unsigned		ep0_expect_in:1;
+	unsigned		start_config_issued:1;
+
+	enum dwc3_ep0_next	ep0_next_event;
+	enum dwc3_ep0_state	ep0state;
+	enum dwc3_link_state	link_state;
+	enum dwc3_device_state	dev_state;
+
+	u8			speed;
+	void			*mem;
+
+	struct dwc3_hwparams	hwparams;
+	struct dentry		*root;
+};
+
+/* -------------------------------------------------------------------------- */
+
+#define DWC3_TRBSTS_OK			0
+#define DWC3_TRBSTS_MISSED_ISOC		1
+#define DWC3_TRBSTS_SETUP_PENDING	2
+
+#define DWC3_TRBCTL_NORMAL		1
+#define DWC3_TRBCTL_CONTROL_SETUP	2
+#define DWC3_TRBCTL_CONTROL_STATUS2	3
+#define DWC3_TRBCTL_CONTROL_STATUS3	4
+#define DWC3_TRBCTL_CONTROL_DATA	5
+#define DWC3_TRBCTL_ISOCHRONOUS_FIRST	6
+#define DWC3_TRBCTL_ISOCHRONOUS		7
+#define DWC3_TRBCTL_LINK_TRB		8
+
+/* -------------------------------------------------------------------------- */
+
+struct dwc3_event_type {
+	u32	is_devspec:1;
+	u32	type:6;
+	u32	reserved8_31:25;
+} __packed;
+
+#define DWC3_DEPEVT_XFERCOMPLETE	0x01
+#define DWC3_DEPEVT_XFERINPROGRESS	0x02
+#define DWC3_DEPEVT_XFERNOTREADY	0x03
+#define DWC3_DEPEVT_RXTXFIFOEVT		0x04
+#define DWC3_DEPEVT_STREAMEVT		0x06
+#define DWC3_DEPEVT_EPCMDCMPLT		0x07
+
+/**
+ * struct dwc3_event_depvt - Device Endpoint Events
+ * @one_bit: indicates this is an endpoint event (not used)
+ * @endpoint_number: number of the endpoint
+ * @endpoint_event: The event we have:
+ *	0x00	- Reserved
+ *	0x01	- XferComplete
+ *	0x02	- XferInProgress
+ *	0x03	- XferNotReady
+ *	0x04	- RxTxFifoEvt (IN->Underrun, OUT->Overrun)
+ *	0x05	- Reserved
+ *	0x06	- StreamEvt
+ *	0x07	- EPCmdCmplt
+ * @reserved11_10: Reserved, don't use.
+ * @status: Indicates the status of the event. Refer to databook for
+ *	more information.
+ * @parameters: Parameters of the current event. Refer to databook for
+ *	more information.
+ */
+struct dwc3_event_depevt {
+	u32	one_bit:1;
+	u32	endpoint_number:5;
+	u32	endpoint_event:4;
+	u32	reserved11_10:2;
+	u32	status:4;
+#define DEPEVT_STATUS_BUSERR    (1 << 0)
+#define DEPEVT_STATUS_SHORT     (1 << 1)
+#define DEPEVT_STATUS_IOC       (1 << 2)
+#define DEPEVT_STATUS_LST	(1 << 3)
+
+/* Stream event only */
+#define DEPEVT_STREAMEVT_FOUND		1
+#define DEPEVT_STREAMEVT_NOTFOUND	2
+
+/* Control-only Status */
+#define DEPEVT_STATUS_CONTROL_SETUP	0
+#define DEPEVT_STATUS_CONTROL_DATA	1
+#define DEPEVT_STATUS_CONTROL_STATUS	2
+
+	u32	parameters:16;
+} __packed;
+
+/**
+ * struct dwc3_event_devt - Device Events
+ * @one_bit: indicates this is a non-endpoint event (not used)
+ * @device_event: indicates it's a device event. Should read as 0x00
+ * @type: indicates the type of device event.
+ *	0	- DisconnEvt
+ *	1	- USBRst
+ *	2	- ConnectDone
+ *	3	- ULStChng
+ *	4	- WkUpEvt
+ *	5	- Reserved
+ *	6	- EOPF
+ *	7	- SOF
+ *	8	- Reserved
+ *	9	- ErrticErr
+ *	10	- CmdCmplt
+ *	11	- EvntOverflow
+ *	12	- VndrDevTstRcved
+ * @reserved15_12: Reserved, not used
+ * @event_info: Information about this event
+ * @reserved31_24: Reserved, not used
+ */
+struct dwc3_event_devt {
+	u32	one_bit:1;
+	u32	device_event:7;
+	u32	type:4;
+	u32	reserved15_12:4;
+	u32	event_info:8;
+	u32	reserved31_24:8;
+} __packed;
+
+/**
+ * struct dwc3_event_gevt - Other Core Events
+ * @one_bit: indicates this is a non-endpoint event (not used)
+ * @device_event: indicates it's (0x03) Carkit or (0x04) I2C event.
+ * @phy_port_number: self-explanatory
+ * @reserved31_12: Reserved, not used.
+ */
+struct dwc3_event_gevt {
+	u32	one_bit:1;
+	u32	device_event:7;
+	u32	phy_port_number:4;
+	u32	reserved31_12:20;
+} __packed;
+
+/**
+ * union dwc3_event - representation of Event Buffer contents
+ * @raw: raw 32-bit event
+ * @type: the type of the event
+ * @depevt: Device Endpoint Event
+ * @devt: Device Event
+ * @gevt: Global Event
+ */
+union dwc3_event {
+	u32				raw;
+	struct dwc3_event_type		type;
+	struct dwc3_event_depevt	depevt;
+	struct dwc3_event_devt		devt;
+	struct dwc3_event_gevt		gevt;
+};
+
+/*
+ * DWC3 Features to be used as Driver Data
+ */
+
+#define DWC3_HAS_PERIPHERAL		BIT(0)
+#define DWC3_HAS_XHCI			BIT(1)
+#define DWC3_HAS_OTG			BIT(3)
+
+#endif /* __DRIVERS_USB_DWC3_CORE_H */
diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h
new file mode 100644
index 0000000..5894ee8
--- /dev/null
+++ b/drivers/usb/dwc3/debug.h
@@ -0,0 +1,50 @@
+/**
+ * debug.h - DesignWare USB3 DRD Controller Debug Header
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "core.h"
+
+#ifdef CONFIG_DEBUG_FS
+extern int dwc3_debugfs_init(struct dwc3 *);
+extern void dwc3_debugfs_exit(struct dwc3 *);
+#else
+static inline int dwc3_debugfs_init(struct dwc3 *d)
+{  return 0;  }
+static inline void dwc3_debugfs_exit(struct dwc3 *d)
+{  }
+#endif
+
diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
new file mode 100644
index 0000000..da1ad77
--- /dev/null
+++ b/drivers/usb/dwc3/debugfs.c
@@ -0,0 +1,441 @@
+/**
+ * debugfs.c - DesignWare USB3 DRD Controller DebugFS file
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/ptrace.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/delay.h>
+
+#include <asm/uaccess.h>
+
+#include "core.h"
+#include "gadget.h"
+#include "io.h"
+
+struct dwc3_register {
+	const char	*name;
+	u32		offset;
+};
+
+#define dump_register(nm)				\
+{							\
+	.name	= __stringify(nm),			\
+	.offset	= DWC3_ ##nm,				\
+}
+
+static const struct dwc3_register dwc3_regs[] = {
+	dump_register(GSBUSCFG0),
+	dump_register(GSBUSCFG1),
+	dump_register(GTXTHRCFG),
+	dump_register(GRXTHRCFG),
+	dump_register(GCTL),
+	dump_register(GEVTEN),
+	dump_register(GSTS),
+	dump_register(GSNPSID),
+	dump_register(GGPIO),
+	dump_register(GUID),
+	dump_register(GUCTL),
+	dump_register(GBUSERRADDR0),
+	dump_register(GBUSERRADDR1),
+	dump_register(GPRTBIMAP0),
+	dump_register(GPRTBIMAP1),
+	dump_register(GHWPARAMS0),
+	dump_register(GHWPARAMS1),
+	dump_register(GHWPARAMS2),
+	dump_register(GHWPARAMS3),
+	dump_register(GHWPARAMS4),
+	dump_register(GHWPARAMS5),
+	dump_register(GHWPARAMS6),
+	dump_register(GHWPARAMS7),
+	dump_register(GDBGFIFOSPACE),
+	dump_register(GDBGLTSSM),
+	dump_register(GPRTBIMAP_HS0),
+	dump_register(GPRTBIMAP_HS1),
+	dump_register(GPRTBIMAP_FS0),
+	dump_register(GPRTBIMAP_FS1),
+
+	dump_register(GUSB2PHYCFG(0)),
+	dump_register(GUSB2PHYCFG(1)),
+	dump_register(GUSB2PHYCFG(2)),
+	dump_register(GUSB2PHYCFG(3)),
+	dump_register(GUSB2PHYCFG(4)),
+	dump_register(GUSB2PHYCFG(5)),
+	dump_register(GUSB2PHYCFG(6)),
+	dump_register(GUSB2PHYCFG(7)),
+	dump_register(GUSB2PHYCFG(8)),
+	dump_register(GUSB2PHYCFG(9)),
+	dump_register(GUSB2PHYCFG(10)),
+	dump_register(GUSB2PHYCFG(11)),
+	dump_register(GUSB2PHYCFG(12)),
+	dump_register(GUSB2PHYCFG(13)),
+	dump_register(GUSB2PHYCFG(14)),
+	dump_register(GUSB2PHYCFG(15)),
+
+	dump_register(GUSB2I2CCTL(0)),
+	dump_register(GUSB2I2CCTL(1)),
+	dump_register(GUSB2I2CCTL(2)),
+	dump_register(GUSB2I2CCTL(3)),
+	dump_register(GUSB2I2CCTL(4)),
+	dump_register(GUSB2I2CCTL(5)),
+	dump_register(GUSB2I2CCTL(6)),
+	dump_register(GUSB2I2CCTL(7)),
+	dump_register(GUSB2I2CCTL(8)),
+	dump_register(GUSB2I2CCTL(9)),
+	dump_register(GUSB2I2CCTL(10)),
+	dump_register(GUSB2I2CCTL(11)),
+	dump_register(GUSB2I2CCTL(12)),
+	dump_register(GUSB2I2CCTL(13)),
+	dump_register(GUSB2I2CCTL(14)),
+	dump_register(GUSB2I2CCTL(15)),
+
+	dump_register(GUSB2PHYACC(0)),
+	dump_register(GUSB2PHYACC(1)),
+	dump_register(GUSB2PHYACC(2)),
+	dump_register(GUSB2PHYACC(3)),
+	dump_register(GUSB2PHYACC(4)),
+	dump_register(GUSB2PHYACC(5)),
+	dump_register(GUSB2PHYACC(6)),
+	dump_register(GUSB2PHYACC(7)),
+	dump_register(GUSB2PHYACC(8)),
+	dump_register(GUSB2PHYACC(9)),
+	dump_register(GUSB2PHYACC(10)),
+	dump_register(GUSB2PHYACC(11)),
+	dump_register(GUSB2PHYACC(12)),
+	dump_register(GUSB2PHYACC(13)),
+	dump_register(GUSB2PHYACC(14)),
+	dump_register(GUSB2PHYACC(15)),
+
+	dump_register(GUSB3PIPECTL(0)),
+	dump_register(GUSB3PIPECTL(1)),
+	dump_register(GUSB3PIPECTL(2)),
+	dump_register(GUSB3PIPECTL(3)),
+	dump_register(GUSB3PIPECTL(4)),
+	dump_register(GUSB3PIPECTL(5)),
+	dump_register(GUSB3PIPECTL(6)),
+	dump_register(GUSB3PIPECTL(7)),
+	dump_register(GUSB3PIPECTL(8)),
+	dump_register(GUSB3PIPECTL(9)),
+	dump_register(GUSB3PIPECTL(10)),
+	dump_register(GUSB3PIPECTL(11)),
+	dump_register(GUSB3PIPECTL(12)),
+	dump_register(GUSB3PIPECTL(13)),
+	dump_register(GUSB3PIPECTL(14)),
+	dump_register(GUSB3PIPECTL(15)),
+
+	dump_register(GTXFIFOSIZ(0)),
+	dump_register(GTXFIFOSIZ(1)),
+	dump_register(GTXFIFOSIZ(2)),
+	dump_register(GTXFIFOSIZ(3)),
+	dump_register(GTXFIFOSIZ(4)),
+	dump_register(GTXFIFOSIZ(5)),
+	dump_register(GTXFIFOSIZ(6)),
+	dump_register(GTXFIFOSIZ(7)),
+	dump_register(GTXFIFOSIZ(8)),
+	dump_register(GTXFIFOSIZ(9)),
+	dump_register(GTXFIFOSIZ(10)),
+	dump_register(GTXFIFOSIZ(11)),
+	dump_register(GTXFIFOSIZ(12)),
+	dump_register(GTXFIFOSIZ(13)),
+	dump_register(GTXFIFOSIZ(14)),
+	dump_register(GTXFIFOSIZ(15)),
+	dump_register(GTXFIFOSIZ(16)),
+	dump_register(GTXFIFOSIZ(17)),
+	dump_register(GTXFIFOSIZ(18)),
+	dump_register(GTXFIFOSIZ(19)),
+	dump_register(GTXFIFOSIZ(20)),
+	dump_register(GTXFIFOSIZ(21)),
+	dump_register(GTXFIFOSIZ(22)),
+	dump_register(GTXFIFOSIZ(23)),
+	dump_register(GTXFIFOSIZ(24)),
+	dump_register(GTXFIFOSIZ(25)),
+	dump_register(GTXFIFOSIZ(26)),
+	dump_register(GTXFIFOSIZ(27)),
+	dump_register(GTXFIFOSIZ(28)),
+	dump_register(GTXFIFOSIZ(29)),
+	dump_register(GTXFIFOSIZ(30)),
+	dump_register(GTXFIFOSIZ(31)),
+
+	dump_register(GRXFIFOSIZ(0)),
+	dump_register(GRXFIFOSIZ(1)),
+	dump_register(GRXFIFOSIZ(2)),
+	dump_register(GRXFIFOSIZ(3)),
+	dump_register(GRXFIFOSIZ(4)),
+	dump_register(GRXFIFOSIZ(5)),
+	dump_register(GRXFIFOSIZ(6)),
+	dump_register(GRXFIFOSIZ(7)),
+	dump_register(GRXFIFOSIZ(8)),
+	dump_register(GRXFIFOSIZ(9)),
+	dump_register(GRXFIFOSIZ(10)),
+	dump_register(GRXFIFOSIZ(11)),
+	dump_register(GRXFIFOSIZ(12)),
+	dump_register(GRXFIFOSIZ(13)),
+	dump_register(GRXFIFOSIZ(14)),
+	dump_register(GRXFIFOSIZ(15)),
+	dump_register(GRXFIFOSIZ(16)),
+	dump_register(GRXFIFOSIZ(17)),
+	dump_register(GRXFIFOSIZ(18)),
+	dump_register(GRXFIFOSIZ(19)),
+	dump_register(GRXFIFOSIZ(20)),
+	dump_register(GRXFIFOSIZ(21)),
+	dump_register(GRXFIFOSIZ(22)),
+	dump_register(GRXFIFOSIZ(23)),
+	dump_register(GRXFIFOSIZ(24)),
+	dump_register(GRXFIFOSIZ(25)),
+	dump_register(GRXFIFOSIZ(26)),
+	dump_register(GRXFIFOSIZ(27)),
+	dump_register(GRXFIFOSIZ(28)),
+	dump_register(GRXFIFOSIZ(29)),
+	dump_register(GRXFIFOSIZ(30)),
+	dump_register(GRXFIFOSIZ(31)),
+
+	dump_register(GEVNTADRLO(0)),
+	dump_register(GEVNTADRHI(0)),
+	dump_register(GEVNTSIZ(0)),
+	dump_register(GEVNTCOUNT(0)),
+
+	dump_register(GHWPARAMS8),
+	dump_register(DCFG),
+	dump_register(DCTL),
+	dump_register(DEVTEN),
+	dump_register(DSTS),
+	dump_register(DGCMDPAR),
+	dump_register(DGCMD),
+	dump_register(DALEPENA),
+
+	dump_register(DEPCMDPAR2(0)),
+	dump_register(DEPCMDPAR2(1)),
+	dump_register(DEPCMDPAR2(2)),
+	dump_register(DEPCMDPAR2(3)),
+	dump_register(DEPCMDPAR2(4)),
+	dump_register(DEPCMDPAR2(5)),
+	dump_register(DEPCMDPAR2(6)),
+	dump_register(DEPCMDPAR2(7)),
+	dump_register(DEPCMDPAR2(8)),
+	dump_register(DEPCMDPAR2(9)),
+	dump_register(DEPCMDPAR2(10)),
+	dump_register(DEPCMDPAR2(11)),
+	dump_register(DEPCMDPAR2(12)),
+	dump_register(DEPCMDPAR2(13)),
+	dump_register(DEPCMDPAR2(14)),
+	dump_register(DEPCMDPAR2(15)),
+	dump_register(DEPCMDPAR2(16)),
+	dump_register(DEPCMDPAR2(17)),
+	dump_register(DEPCMDPAR2(18)),
+	dump_register(DEPCMDPAR2(19)),
+	dump_register(DEPCMDPAR2(20)),
+	dump_register(DEPCMDPAR2(21)),
+	dump_register(DEPCMDPAR2(22)),
+	dump_register(DEPCMDPAR2(23)),
+	dump_register(DEPCMDPAR2(24)),
+	dump_register(DEPCMDPAR2(25)),
+	dump_register(DEPCMDPAR2(26)),
+	dump_register(DEPCMDPAR2(27)),
+	dump_register(DEPCMDPAR2(28)),
+	dump_register(DEPCMDPAR2(29)),
+	dump_register(DEPCMDPAR2(30)),
+	dump_register(DEPCMDPAR2(31)),
+
+	dump_register(DEPCMDPAR1(0)),
+	dump_register(DEPCMDPAR1(1)),
+	dump_register(DEPCMDPAR1(2)),
+	dump_register(DEPCMDPAR1(3)),
+	dump_register(DEPCMDPAR1(4)),
+	dump_register(DEPCMDPAR1(5)),
+	dump_register(DEPCMDPAR1(6)),
+	dump_register(DEPCMDPAR1(7)),
+	dump_register(DEPCMDPAR1(8)),
+	dump_register(DEPCMDPAR1(9)),
+	dump_register(DEPCMDPAR1(10)),
+	dump_register(DEPCMDPAR1(11)),
+	dump_register(DEPCMDPAR1(12)),
+	dump_register(DEPCMDPAR1(13)),
+	dump_register(DEPCMDPAR1(14)),
+	dump_register(DEPCMDPAR1(15)),
+	dump_register(DEPCMDPAR1(16)),
+	dump_register(DEPCMDPAR1(17)),
+	dump_register(DEPCMDPAR1(18)),
+	dump_register(DEPCMDPAR1(19)),
+	dump_register(DEPCMDPAR1(20)),
+	dump_register(DEPCMDPAR1(21)),
+	dump_register(DEPCMDPAR1(22)),
+	dump_register(DEPCMDPAR1(23)),
+	dump_register(DEPCMDPAR1(24)),
+	dump_register(DEPCMDPAR1(25)),
+	dump_register(DEPCMDPAR1(26)),
+	dump_register(DEPCMDPAR1(27)),
+	dump_register(DEPCMDPAR1(28)),
+	dump_register(DEPCMDPAR1(29)),
+	dump_register(DEPCMDPAR1(30)),
+	dump_register(DEPCMDPAR1(31)),
+
+	dump_register(DEPCMDPAR0(0)),
+	dump_register(DEPCMDPAR0(1)),
+	dump_register(DEPCMDPAR0(2)),
+	dump_register(DEPCMDPAR0(3)),
+	dump_register(DEPCMDPAR0(4)),
+	dump_register(DEPCMDPAR0(5)),
+	dump_register(DEPCMDPAR0(6)),
+	dump_register(DEPCMDPAR0(7)),
+	dump_register(DEPCMDPAR0(8)),
+	dump_register(DEPCMDPAR0(9)),
+	dump_register(DEPCMDPAR0(10)),
+	dump_register(DEPCMDPAR0(11)),
+	dump_register(DEPCMDPAR0(12)),
+	dump_register(DEPCMDPAR0(13)),
+	dump_register(DEPCMDPAR0(14)),
+	dump_register(DEPCMDPAR0(15)),
+	dump_register(DEPCMDPAR0(16)),
+	dump_register(DEPCMDPAR0(17)),
+	dump_register(DEPCMDPAR0(18)),
+	dump_register(DEPCMDPAR0(19)),
+	dump_register(DEPCMDPAR0(20)),
+	dump_register(DEPCMDPAR0(21)),
+	dump_register(DEPCMDPAR0(22)),
+	dump_register(DEPCMDPAR0(23)),
+	dump_register(DEPCMDPAR0(24)),
+	dump_register(DEPCMDPAR0(25)),
+	dump_register(DEPCMDPAR0(26)),
+	dump_register(DEPCMDPAR0(27)),
+	dump_register(DEPCMDPAR0(28)),
+	dump_register(DEPCMDPAR0(29)),
+	dump_register(DEPCMDPAR0(30)),
+	dump_register(DEPCMDPAR0(31)),
+
+	dump_register(DEPCMD(0)),
+	dump_register(DEPCMD(1)),
+	dump_register(DEPCMD(2)),
+	dump_register(DEPCMD(3)),
+	dump_register(DEPCMD(4)),
+	dump_register(DEPCMD(5)),
+	dump_register(DEPCMD(6)),
+	dump_register(DEPCMD(7)),
+	dump_register(DEPCMD(8)),
+	dump_register(DEPCMD(9)),
+	dump_register(DEPCMD(10)),
+	dump_register(DEPCMD(11)),
+	dump_register(DEPCMD(12)),
+	dump_register(DEPCMD(13)),
+	dump_register(DEPCMD(14)),
+	dump_register(DEPCMD(15)),
+	dump_register(DEPCMD(16)),
+	dump_register(DEPCMD(17)),
+	dump_register(DEPCMD(18)),
+	dump_register(DEPCMD(19)),
+	dump_register(DEPCMD(20)),
+	dump_register(DEPCMD(21)),
+	dump_register(DEPCMD(22)),
+	dump_register(DEPCMD(23)),
+	dump_register(DEPCMD(24)),
+	dump_register(DEPCMD(25)),
+	dump_register(DEPCMD(26)),
+	dump_register(DEPCMD(27)),
+	dump_register(DEPCMD(28)),
+	dump_register(DEPCMD(29)),
+	dump_register(DEPCMD(30)),
+	dump_register(DEPCMD(31)),
+
+	dump_register(OCFG),
+	dump_register(OCTL),
+	dump_register(OEVTEN),
+	dump_register(OSTS),
+};
+
+static int dwc3_regdump_show(struct seq_file *s, void *unused)
+{
+	struct dwc3		*dwc = s->private;
+	int			i;
+
+	seq_printf(s, "DesignWare USB3 Core Register Dump\n");
+
+	for (i = 0; i < ARRAY_SIZE(dwc3_regs); i++) {
+		seq_printf(s, "%-20s :    %08x\n", dwc3_regs[i].name,
+				dwc3_readl(dwc->regs, dwc3_regs[i].offset));
+	}
+
+	return 0;
+}
+
+static int dwc3_regdump_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dwc3_regdump_show, inode->i_private);
+}
+
+static const struct file_operations dwc3_regdump_fops = {
+	.open			= dwc3_regdump_open,
+	.read			= seq_read,
+	.release		= single_release,
+};
+
+int __devinit dwc3_debugfs_init(struct dwc3 *dwc)
+{
+	struct dentry		*root;
+	struct dentry		*file;
+	int			ret;
+
+	root = debugfs_create_dir(dev_name(dwc->dev), NULL);
+	if (IS_ERR(root)){
+		ret = PTR_ERR(root);
+		goto err0;
+	}
+
+	dwc->root = root;
+
+	file = debugfs_create_file("regdump", S_IRUGO, root, dwc,
+			&dwc3_regdump_fops);
+	if (IS_ERR(file)) {
+		ret = PTR_ERR(file);
+		goto err1;
+	}
+	return 0;
+
+err1:
+	debugfs_remove_recursive(root);
+
+err0:
+	return ret;
+}
+
+void __devexit dwc3_debugfs_exit(struct dwc3 *dwc)
+{
+	debugfs_remove_recursive(dwc->root);
+	dwc->root = NULL;
+}
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
new file mode 100644
index 0000000..062552b
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -0,0 +1,401 @@
+/**
+ * dwc3-omap.c - OMAP Specific Glue layer
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/dwc3-omap.h>
+#include <linux/dma-mapping.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+#include "io.h"
+
+/*
+ * All these registers belong to OMAP's Wrapper around the
+ * DesignWare USB3 Core.
+ */
+
+#define USBOTGSS_REVISION			0x0000
+#define USBOTGSS_SYSCONFIG			0x0010
+#define USBOTGSS_IRQ_EOI			0x0020
+#define USBOTGSS_IRQSTATUS_RAW_0		0x0024
+#define USBOTGSS_IRQSTATUS_0			0x0028
+#define USBOTGSS_IRQENABLE_SET_0		0x002c
+#define USBOTGSS_IRQENABLE_CLR_0		0x0030
+#define USBOTGSS_IRQSTATUS_RAW_1		0x0034
+#define USBOTGSS_IRQSTATUS_1			0x0038
+#define USBOTGSS_IRQENABLE_SET_1		0x003c
+#define USBOTGSS_IRQENABLE_CLR_1		0x0040
+#define USBOTGSS_UTMI_OTG_CTRL			0x0080
+#define USBOTGSS_UTMI_OTG_STATUS		0x0084
+#define USBOTGSS_MMRAM_OFFSET			0x0100
+#define USBOTGSS_FLADJ				0x0104
+#define USBOTGSS_DEBUG_CFG			0x0108
+#define USBOTGSS_DEBUG_DATA			0x010c
+
+/* SYSCONFIG REGISTER */
+#define USBOTGSS_SYSCONFIG_DMADISABLE		(1 << 16)
+#define USBOTGSS_SYSCONFIG_STANDBYMODE(x)	((x) << 4)
+
+#define USBOTGSS_STANDBYMODE_FORCE_STANDBY	0
+#define USBOTGSS_STANDBYMODE_NO_STANDBY		1
+#define USBOTGSS_STANDBYMODE_SMART_STANDBY	2
+#define USBOTGSS_STANDBYMODE_SMART_WAKEUP	3
+
+#define USBOTGSS_STANDBYMODE_MASK		(0x03 << 4)
+
+#define USBOTGSS_SYSCONFIG_IDLEMODE(x)		((x) << 2)
+
+#define USBOTGSS_IDLEMODE_FORCE_IDLE		0
+#define USBOTGSS_IDLEMODE_NO_IDLE		1
+#define USBOTGSS_IDLEMODE_SMART_IDLE		2
+#define USBOTGSS_IDLEMODE_SMART_WAKEUP		3
+
+#define USBOTGSS_IDLEMODE_MASK			(0x03 << 2)
+
+/* IRQ_EOI REGISTER */
+#define USBOTGSS_IRQ_EOI_LINE_NUMBER		(1 << 0)
+
+/* IRQS0 BITS */
+#define USBOTGSS_IRQO_COREIRQ_ST		(1 << 0)
+
+/* IRQ1 BITS */
+#define USBOTGSS_IRQ1_DMADISABLECLR		(1 << 17)
+#define USBOTGSS_IRQ1_OEVT			(1 << 16)
+#define USBOTGSS_IRQ1_DRVVBUS_RISE		(1 << 13)
+#define USBOTGSS_IRQ1_CHRGVBUS_RISE		(1 << 12)
+#define USBOTGSS_IRQ1_DISCHRGVBUS_RISE		(1 << 11)
+#define USBOTGSS_IRQ1_IDPULLUP_RISE		(1 << 8)
+#define USBOTGSS_IRQ1_DRVVBUS_FALL		(1 << 5)
+#define USBOTGSS_IRQ1_CHRGVBUS_FALL		(1 << 4)
+#define USBOTGSS_IRQ1_DISCHRGVBUS_FALL		(1 << 3)
+#define USBOTGSS_IRQ1_IDPULLUP_FALL		(1 << 0)
+
+/* UTMI_OTG_CTRL REGISTER */
+#define USBOTGSS_UTMI_OTG_CTRL_DRVVBUS		(1 << 5)
+#define USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS		(1 << 4)
+#define USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS	(1 << 3)
+#define USBOTGSS_UTMI_OTG_CTRL_IDPULLUP		(1 << 0)
+
+/* UTMI_OTG_STATUS REGISTER */
+#define USBOTGSS_UTMI_OTG_STATUS_SW_MODE	(1 << 31)
+#define USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT	(1 << 9)
+#define USBOTGSS_UTMI_OTG_STATUS_TXBITSTUFFENABLE (1 << 8)
+#define USBOTGSS_UTMI_OTG_STATUS_IDDIG		(1 << 4)
+#define USBOTGSS_UTMI_OTG_STATUS_SESSEND	(1 << 3)
+#define USBOTGSS_UTMI_OTG_STATUS_SESSVALID	(1 << 2)
+#define USBOTGSS_UTMI_OTG_STATUS_VBUSVALID	(1 << 1)
+
+struct dwc3_omap {
+	/* device lock */
+	spinlock_t		lock;
+
+	struct platform_device	*dwc3;
+	struct device		*dev;
+
+	int			irq;
+	void __iomem		*base;
+
+	void			*context;
+	u32			resource_size;
+
+	u32			dma_status:1;
+};
+
+static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
+{
+	struct dwc3_omap	*omap = _omap;
+	u32			reg;
+
+	spin_lock(&omap->lock);
+
+	reg = dwc3_readl(omap->base, USBOTGSS_IRQSTATUS_1);
+
+	if (reg & USBOTGSS_IRQ1_DMADISABLECLR) {
+		dev_dbg(omap->dev, "DMA Disable was Cleared\n");
+		omap->dma_status = false;
+	}
+
+	if (reg & USBOTGSS_IRQ1_OEVT)
+		dev_dbg(omap->dev, "OTG Event\n");
+
+	if (reg & USBOTGSS_IRQ1_DRVVBUS_RISE)
+		dev_dbg(omap->dev, "DRVVBUS Rise\n");
+
+	if (reg & USBOTGSS_IRQ1_CHRGVBUS_RISE)
+		dev_dbg(omap->dev, "CHRGVBUS Rise\n");
+
+	if (reg & USBOTGSS_IRQ1_DISCHRGVBUS_RISE)
+		dev_dbg(omap->dev, "DISCHRGVBUS Rise\n");
+
+	if (reg & USBOTGSS_IRQ1_IDPULLUP_RISE)
+		dev_dbg(omap->dev, "IDPULLUP Rise\n");
+
+	if (reg & USBOTGSS_IRQ1_DRVVBUS_FALL)
+		dev_dbg(omap->dev, "DRVVBUS Fall\n");
+
+	if (reg & USBOTGSS_IRQ1_CHRGVBUS_FALL)
+		dev_dbg(omap->dev, "CHRGVBUS Fall\n");
+
+	if (reg & USBOTGSS_IRQ1_DISCHRGVBUS_FALL)
+		dev_dbg(omap->dev, "DISCHRGVBUS Fall\n");
+
+	if (reg & USBOTGSS_IRQ1_IDPULLUP_FALL)
+		dev_dbg(omap->dev, "IDPULLUP Fall\n");
+
+	dwc3_writel(omap->base, USBOTGSS_IRQSTATUS_1, reg);
+
+	reg = dwc3_readl(omap->base, USBOTGSS_IRQSTATUS_0);
+	dwc3_writel(omap->base, USBOTGSS_IRQSTATUS_0, reg);
+
+	spin_unlock(&omap->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit dwc3_omap_probe(struct platform_device *pdev)
+{
+	struct dwc3_omap_data	*pdata = pdev->dev.platform_data;
+	struct platform_device	*dwc3;
+	struct dwc3_omap	*omap;
+	struct resource		*res;
+
+	int			ret = -ENOMEM;
+	int			irq;
+
+	u32			reg;
+
+	void __iomem		*base;
+	void			*context;
+
+	omap = kzalloc(sizeof(*omap), GFP_KERNEL);
+	if (!omap) {
+		dev_err(&pdev->dev, "not enough memory\n");
+		goto err0;
+	}
+
+	platform_set_drvdata(pdev, omap);
+
+	irq = platform_get_irq(pdev, 1);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "missing IRQ resource\n");
+		ret = -EINVAL;
+		goto err1;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		dev_err(&pdev->dev, "missing memory base resource\n");
+		ret = -EINVAL;
+		goto err1;
+	}
+
+	base = ioremap_nocache(res->start, resource_size(res));
+	if (!base) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		goto err1;
+	}
+
+	dwc3 = platform_device_alloc("dwc3-omap", -1);
+	if (!dwc3) {
+		dev_err(&pdev->dev, "couldn't allocate dwc3 device\n");
+		goto err2;
+	}
+
+	context = kzalloc(resource_size(res), GFP_KERNEL);
+	if (!context) {
+		dev_err(&pdev->dev, "couldn't allocate dwc3 context memory\n");
+		goto err3;
+	}
+
+	spin_lock_init(&omap->lock);
+	dma_set_coherent_mask(&dwc3->dev, pdev->dev.coherent_dma_mask);
+
+	dwc3->dev.parent = &pdev->dev;
+	dwc3->dev.dma_mask = pdev->dev.dma_mask;
+	dwc3->dev.dma_parms = pdev->dev.dma_parms;
+	omap->resource_size = resource_size(res);
+	omap->context	= context;
+	omap->dev	= &pdev->dev;
+	omap->irq	= irq;
+	omap->base	= base;
+	omap->dwc3	= dwc3;
+
+	reg = dwc3_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
+
+	if (!pdata) {
+		dev_dbg(&pdev->dev, "missing platform data\n");
+	} else {
+		switch (pdata->utmi_mode) {
+		case DWC3_OMAP_UTMI_MODE_SW:
+			reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
+			break;
+		case DWC3_OMAP_UTMI_MODE_HW:
+			reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
+			break;
+		default:
+			dev_dbg(&pdev->dev, "UNKNOWN utmi mode %d\n",
+					pdata->utmi_mode);
+		}
+	}
+
+	dwc3_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, reg);
+
+	/* check the DMA Status */
+	reg = dwc3_readl(omap->base, USBOTGSS_SYSCONFIG);
+	omap->dma_status = !!(reg & USBOTGSS_SYSCONFIG_DMADISABLE);
+
+	/* Set No-Idle and No-Standby */
+	reg &= ~(USBOTGSS_STANDBYMODE_MASK
+			| USBOTGSS_IDLEMODE_MASK);
+
+	reg |= (USBOTGSS_SYSCONFIG_STANDBYMODE(USBOTGSS_STANDBYMODE_NO_STANDBY)
+		| USBOTGSS_SYSCONFIG_IDLEMODE(USBOTGSS_IDLEMODE_NO_IDLE));
+
+	dwc3_writel(omap->base, USBOTGSS_SYSCONFIG, reg);
+
+	ret = request_irq(omap->irq, dwc3_omap_interrupt, 0,
+			"dwc3-omap", omap);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to request IRQ #%d --> %d\n",
+				omap->irq, ret);
+		goto err4;
+	}
+
+	/* enable all IRQs */
+	reg = USBOTGSS_IRQO_COREIRQ_ST;
+	dwc3_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, reg);
+
+	reg = (USBOTGSS_IRQ1_OEVT |
+			USBOTGSS_IRQ1_DRVVBUS_RISE |
+			USBOTGSS_IRQ1_CHRGVBUS_RISE |
+			USBOTGSS_IRQ1_DISCHRGVBUS_RISE |
+			USBOTGSS_IRQ1_IDPULLUP_RISE |
+			USBOTGSS_IRQ1_DRVVBUS_FALL |
+			USBOTGSS_IRQ1_CHRGVBUS_FALL |
+			USBOTGSS_IRQ1_DISCHRGVBUS_FALL |
+			USBOTGSS_IRQ1_IDPULLUP_FALL);
+
+	dwc3_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg);
+
+	ret = platform_device_add_resources(dwc3, pdev->resource,
+			pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "couldn't add resources to dwc3 device\n");
+		goto err5;
+	}
+
+	ret = platform_device_add(dwc3);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register dwc3 device\n");
+		goto err5;
+	}
+
+	return 0;
+
+err5:
+	free_irq(omap->irq, omap);
+
+err4:
+	kfree(omap->context);
+
+err3:
+	platform_device_put(dwc3);
+
+err2:
+	iounmap(base);
+
+err1:
+	kfree(omap);
+
+err0:
+	return ret;
+}
+
+static int __devexit dwc3_omap_remove(struct platform_device *pdev)
+{
+	struct dwc3_omap	*omap = platform_get_drvdata(pdev);
+
+	platform_device_unregister(omap->dwc3);
+
+	free_irq(omap->irq, omap);
+	iounmap(omap->base);
+
+	kfree(omap->context);
+	kfree(omap);
+
+	return 0;
+}
+
+static const struct of_device_id of_dwc3_matach[] = {
+	{
+		"ti,dwc3",
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_dwc3_matach);
+
+static struct platform_driver dwc3_omap_driver = {
+	.probe		= dwc3_omap_probe,
+	.remove		= __devexit_p(dwc3_omap_remove),
+	.driver		= {
+		.name	= "omap-dwc3",
+		.of_match_table	= of_dwc3_matach,
+	},
+};
+
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_DESCRIPTION("DesignWare USB3 OMAP Glue Layer");
+
+static int __devinit dwc3_omap_init(void)
+{
+	return platform_driver_register(&dwc3_omap_driver);
+}
+module_init(dwc3_omap_init);
+
+static void __exit dwc3_omap_exit(void)
+{
+	platform_driver_unregister(&dwc3_omap_driver);
+}
+module_exit(dwc3_omap_exit);
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
new file mode 100644
index 0000000..f77c000
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -0,0 +1,219 @@
+/**
+ * dwc3-pci.c - PCI Specific glue layer
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+/* FIXME define these in <linux/pci_ids.h> */
+#define PCI_VENDOR_ID_SYNOPSYS		0x16c3
+#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3	0xabcd
+
+#define DWC3_PCI_DEVS_POSSIBLE	32
+
+struct dwc3_pci {
+	struct device		*dev;
+	struct platform_device	*dwc3;
+};
+
+static DECLARE_BITMAP(dwc3_pci_devs, DWC3_PCI_DEVS_POSSIBLE);
+
+static int dwc3_pci_get_device_id(struct dwc3_pci *glue)
+{
+	int		id;
+
+again:
+	id = find_first_zero_bit(dwc3_pci_devs, DWC3_PCI_DEVS_POSSIBLE);
+	if (id < DWC3_PCI_DEVS_POSSIBLE) {
+		int old;
+
+		old = test_and_set_bit(id, dwc3_pci_devs);
+		if (old)
+			goto again;
+	} else {
+		dev_err(glue->dev, "no space for new device\n");
+		id = -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void dwc3_pci_put_device_id(struct dwc3_pci *glue, int id)
+{
+	int			ret;
+
+	if (id < 0)
+		return;
+
+	ret = test_bit(id, dwc3_pci_devs);
+	WARN(!ret, "Device: %s\nID %d not in use\n",
+			dev_driver_string(glue->dev), id);
+	clear_bit(id, dwc3_pci_devs);
+}
+
+static int __devinit dwc3_pci_probe(struct pci_dev *pci,
+		const struct pci_device_id *id)
+{
+	struct resource		res[2];
+	struct platform_device	*dwc3;
+	struct dwc3_pci		*glue;
+	int			ret = -ENOMEM;
+	int			devid;
+
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pci->dev, "not enough memory\n");
+		goto err0;
+	}
+
+	glue->dev	= &pci->dev;
+
+	ret = pci_enable_device(pci);
+	if (ret) {
+		dev_err(&pci->dev, "failed to enable pci device\n");
+		goto err1;
+	}
+
+	pci_set_power_state(pci, PCI_D0);
+	pci_set_master(pci);
+
+	devid = dwc3_pci_get_device_id(glue);
+	if (devid < 0)
+		goto err2;
+
+	dwc3 = platform_device_alloc("dwc3-pci", devid);
+	if (!dwc3) {
+		dev_err(&pci->dev, "couldn't allocate dwc3 device\n");
+		goto err3;
+	}
+
+	memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
+
+	res[0].start	= pci_resource_start(pci, 0);
+	res[0].end	= pci_resource_end(pci, 0);
+	res[0].name	= "dwc_usb3";
+	res[0].flags	= IORESOURCE_MEM;
+
+	res[1].start	= pci->irq;
+	res[1].name	= "dwc_usb3";
+	res[1].flags	= IORESOURCE_IRQ;
+
+	ret = platform_device_add_resources(dwc3, res, ARRAY_SIZE(res));
+	if (ret) {
+		dev_err(&pci->dev, "couldn't add resources to dwc3 device\n");
+		goto err4;
+	}
+
+	pci_set_drvdata(pci, glue);
+
+	dma_set_coherent_mask(&dwc3->dev, pci->dev.coherent_dma_mask);
+
+	dwc3->dev.dma_mask = pci->dev.dma_mask;
+	dwc3->dev.dma_parms = pci->dev.dma_parms;
+	dwc3->dev.parent = &pci->dev;
+	glue->dwc3	= dwc3;
+
+	ret = platform_device_add(dwc3);
+	if (ret) {
+		dev_err(&pci->dev, "failed to register dwc3 device\n");
+		goto err4;
+	}
+
+	return 0;
+
+err4:
+	pci_set_drvdata(pci, NULL);
+	platform_device_put(dwc3);
+
+err3:
+	dwc3_pci_put_device_id(glue, devid);
+
+err2:
+	pci_disable_device(pci);
+
+err1:
+	kfree(pci);
+
+err0:
+	return ret;
+}
+
+static void __devexit dwc3_pci_remove(struct pci_dev *pci)
+{
+	struct dwc3_pci	*glue = pci_get_drvdata(pci);
+
+	dwc3_pci_put_device_id(glue, glue->dwc3->id);
+	platform_device_unregister(glue->dwc3);
+	pci_set_drvdata(pci, NULL);
+	pci_disable_device(pci);
+	kfree(glue);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(dwc3_pci_id_table) = {
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
+				PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3),
+	},
+	{  }	/* Terminating Entry */
+};
+MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);
+
+static struct pci_driver dwc3_pci_driver = {
+	.name		= "pci-dwc3",
+	.id_table	= dwc3_pci_id_table,
+	.probe		= dwc3_pci_probe,
+	.remove		= __devexit_p(dwc3_pci_remove),
+};
+
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_DESCRIPTION("DesignWare USB3 PCI Glue Layer");
+
+static int __devinit dwc3_pci_init(void)
+{
+	return pci_register_driver(&dwc3_pci_driver);
+}
+module_init(dwc3_pci_init);
+
+static void __exit dwc3_pci_exit(void)
+{
+	pci_unregister_driver(&dwc3_pci_driver);
+}
+module_exit(dwc3_pci_exit);
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
new file mode 100644
index 0000000..69a4e43
--- /dev/null
+++ b/drivers/usb/dwc3/ep0.c
@@ -0,0 +1,804 @@
+/**
+ * ep0.c - DesignWare USB3 DRD Controller Endpoint 0 Handling
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include "core.h"
+#include "gadget.h"
+#include "io.h"
+
+static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event);
+
+static const char *dwc3_ep0_state_string(enum dwc3_ep0_state state)
+{
+	switch (state) {
+	case EP0_UNCONNECTED:
+		return "Unconnected";
+	case EP0_SETUP_PHASE:
+		return "Setup Phase";
+	case EP0_DATA_PHASE:
+		return "Data Phase";
+	case EP0_STATUS_PHASE:
+		return "Status Phase";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
+		u32 len, u32 type)
+{
+	struct dwc3_gadget_ep_cmd_params params;
+	struct dwc3_trb_hw		*trb_hw;
+	struct dwc3_trb			trb;
+	struct dwc3_ep			*dep;
+
+	int				ret;
+
+	dep = dwc->eps[epnum];
+	if (dep->flags & DWC3_EP_BUSY) {
+		dev_vdbg(dwc->dev, "%s: still busy\n", dep->name);
+		return 0;
+	}
+
+	trb_hw = dwc->ep0_trb;
+	memset(&trb, 0, sizeof(trb));
+
+	trb.trbctl = type;
+	trb.bplh = buf_dma;
+	trb.length = len;
+
+	trb.hwo	= 1;
+	trb.lst	= 1;
+	trb.ioc	= 1;
+	trb.isp_imi = 1;
+
+	dwc3_trb_to_hw(&trb, trb_hw);
+
+	memset(&params, 0, sizeof(params));
+	params.param0 = upper_32_bits(dwc->ep0_trb_addr);
+	params.param1 = lower_32_bits(dwc->ep0_trb_addr);
+
+	ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
+			DWC3_DEPCMD_STARTTRANSFER, &params);
+	if (ret < 0) {
+		dev_dbg(dwc->dev, "failed to send STARTTRANSFER command\n");
+		return ret;
+	}
+
+	dep->flags |= DWC3_EP_BUSY;
+	dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc,
+			dep->number);
+
+	dwc->ep0_next_event = DWC3_EP0_COMPLETE;
+
+	return 0;
+}
+
+static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
+		struct dwc3_request *req)
+{
+	int			ret = 0;
+
+	req->request.actual	= 0;
+	req->request.status	= -EINPROGRESS;
+	req->epnum		= dep->number;
+
+	list_add_tail(&req->list, &dep->request_list);
+
+	/*
+	 * Gadget driver might not be quick enough to queue a request
+	 * before we get a Transfer Not Ready event on this endpoint.
+	 *
+	 * In that case, we will set DWC3_EP_PENDING_REQUEST. When that
+	 * flag is set, it's telling us that as soon as Gadget queues the
+	 * required request, we should kick the transfer here because the
+	 * IRQ we were waiting for is long gone.
+	 */
+	if (dep->flags & DWC3_EP_PENDING_REQUEST) {
+		struct dwc3	*dwc = dep->dwc;
+		unsigned	direction;
+		u32		type;
+
+		direction = !!(dep->flags & DWC3_EP0_DIR_IN);
+
+		if (dwc->ep0state == EP0_STATUS_PHASE) {
+			type = dwc->three_stage_setup
+				? DWC3_TRBCTL_CONTROL_STATUS3
+				: DWC3_TRBCTL_CONTROL_STATUS2;
+		} else if (dwc->ep0state == EP0_DATA_PHASE) {
+			type = DWC3_TRBCTL_CONTROL_DATA;
+		} else {
+			/* should never happen */
+			WARN_ON(1);
+			return 0;
+		}
+
+		ret = dwc3_ep0_start_trans(dwc, direction,
+				req->request.dma, req->request.length, type);
+		dep->flags &= ~(DWC3_EP_PENDING_REQUEST |
+				DWC3_EP0_DIR_IN);
+	}
+
+	return ret;
+}
+
+int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
+		gfp_t gfp_flags)
+{
+	struct dwc3_request		*req = to_dwc3_request(request);
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
+	struct dwc3			*dwc = dep->dwc;
+
+	unsigned long			flags;
+
+	int				ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	if (!dep->desc) {
+		dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n",
+				request, dep->name);
+		ret = -ESHUTDOWN;
+		goto out;
+	}
+
+	/* we share one TRB for ep0/1 */
+	if (!list_empty(&dwc->eps[0]->request_list) ||
+			!list_empty(&dwc->eps[1]->request_list) ||
+			dwc->ep0_status_pending) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	dev_vdbg(dwc->dev, "queueing request %p to %s length %d, state '%s'\n",
+			request, dep->name, request->length,
+			dwc3_ep0_state_string(dwc->ep0state));
+
+	ret = __dwc3_gadget_ep0_queue(dep, req);
+
+out:
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
+{
+	struct dwc3_ep		*dep = dwc->eps[0];
+
+	/* stall is always issued on EP0 */
+	__dwc3_gadget_ep_set_halt(dwc->eps[0], 1);
+	dwc->eps[0]->flags = DWC3_EP_ENABLED;
+
+	if (!list_empty(&dep->request_list)) {
+		struct dwc3_request	*req;
+
+		req = next_request(&dep->request_list);
+		dwc3_gadget_giveback(dep, req, -ECONNRESET);
+	}
+
+	dwc->ep0state = EP0_SETUP_PHASE;
+	dwc3_ep0_out_start(dwc);
+}
+
+void dwc3_ep0_out_start(struct dwc3 *dwc)
+{
+	int				ret;
+
+	ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8,
+			DWC3_TRBCTL_CONTROL_SETUP);
+	WARN_ON(ret < 0);
+}
+
+static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le)
+{
+	struct dwc3_ep		*dep;
+	u32			windex = le16_to_cpu(wIndex_le);
+	u32			epnum;
+
+	epnum = (windex & USB_ENDPOINT_NUMBER_MASK) << 1;
+	if ((windex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
+		epnum |= 1;
+
+	dep = dwc->eps[epnum];
+	if (dep->flags & DWC3_EP_ENABLED)
+		return dep;
+
+	return NULL;
+}
+
+static void dwc3_ep0_send_status_response(struct dwc3 *dwc)
+{
+	dwc3_ep0_start_trans(dwc, 1, dwc->setup_buf_addr,
+			dwc->ep0_usb_req.length,
+			DWC3_TRBCTL_CONTROL_DATA);
+}
+
+/*
+ * ch 9.4.5
+ */
+static int dwc3_ep0_handle_status(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+{
+	struct dwc3_ep		*dep;
+	u32			recip;
+	u16			usb_status = 0;
+	__le16			*response_pkt;
+
+	recip = ctrl->bRequestType & USB_RECIP_MASK;
+	switch (recip) {
+	case USB_RECIP_DEVICE:
+		/*
+		 * We are self-powered. U1/U2/LTM will be set later
+		 * once we handle this states. RemoteWakeup is 0 on SS
+		 */
+		usb_status |= dwc->is_selfpowered << USB_DEVICE_SELF_POWERED;
+		break;
+
+	case USB_RECIP_INTERFACE:
+		/*
+		 * Function Remote Wake Capable	D0
+		 * Function Remote Wakeup	D1
+		 */
+		break;
+
+	case USB_RECIP_ENDPOINT:
+		dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
+		if (!dep)
+		       return -EINVAL;
+
+		if (dep->flags & DWC3_EP_STALL)
+			usb_status = 1 << USB_ENDPOINT_HALT;
+		break;
+	default:
+		return -EINVAL;
+	};
+
+	response_pkt = (__le16 *) dwc->setup_buf;
+	*response_pkt = cpu_to_le16(usb_status);
+	dwc->ep0_usb_req.length = sizeof(*response_pkt);
+	dwc->ep0_status_pending = 1;
+
+	return 0;
+}
+
+static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
+		struct usb_ctrlrequest *ctrl, int set)
+{
+	struct dwc3_ep		*dep;
+	u32			recip;
+	u32			wValue;
+	u32			wIndex;
+	u32			reg;
+	int			ret;
+	u32			mode;
+
+	wValue = le16_to_cpu(ctrl->wValue);
+	wIndex = le16_to_cpu(ctrl->wIndex);
+	recip = ctrl->bRequestType & USB_RECIP_MASK;
+	switch (recip) {
+	case USB_RECIP_DEVICE:
+
+		/*
+		 * 9.4.1 says only only for SS, in AddressState only for
+		 * default control pipe
+		 */
+		switch (wValue) {
+		case USB_DEVICE_U1_ENABLE:
+		case USB_DEVICE_U2_ENABLE:
+		case USB_DEVICE_LTM_ENABLE:
+			if (dwc->dev_state != DWC3_CONFIGURED_STATE)
+				return -EINVAL;
+			if (dwc->speed != DWC3_DSTS_SUPERSPEED)
+				return -EINVAL;
+		}
+
+		/* XXX add U[12] & LTM */
+		switch (wValue) {
+		case USB_DEVICE_REMOTE_WAKEUP:
+			break;
+		case USB_DEVICE_U1_ENABLE:
+			break;
+		case USB_DEVICE_U2_ENABLE:
+			break;
+		case USB_DEVICE_LTM_ENABLE:
+			break;
+
+		case USB_DEVICE_TEST_MODE:
+			if ((wIndex & 0xff) != 0)
+				return -EINVAL;
+			if (!set)
+				return -EINVAL;
+
+			mode = wIndex >> 8;
+			reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+			reg &= ~DWC3_DCTL_TSTCTRL_MASK;
+
+			switch (mode) {
+			case TEST_J:
+			case TEST_K:
+			case TEST_SE0_NAK:
+			case TEST_PACKET:
+			case TEST_FORCE_EN:
+				reg |= mode << 1;
+				break;
+			default:
+				return -EINVAL;
+			}
+			dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+
+	case USB_RECIP_INTERFACE:
+		switch (wValue) {
+		case USB_INTRF_FUNC_SUSPEND:
+			if (wIndex & USB_INTRF_FUNC_SUSPEND_LP)
+				/* XXX enable Low power suspend */
+				;
+			if (wIndex & USB_INTRF_FUNC_SUSPEND_RW)
+				/* XXX enable remote wakeup */
+				;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+
+	case USB_RECIP_ENDPOINT:
+		switch (wValue) {
+		case USB_ENDPOINT_HALT:
+
+			dep =  dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
+			if (!dep)
+				return -EINVAL;
+			ret = __dwc3_gadget_ep_set_halt(dep, set);
+			if (ret)
+				return -EINVAL;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+
+	default:
+		return -EINVAL;
+	};
+
+	return 0;
+}
+
+static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+{
+	u32 addr;
+	u32 reg;
+
+	addr = le16_to_cpu(ctrl->wValue);
+	if (addr > 127)
+		return -EINVAL;
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCFG);
+	reg &= ~(DWC3_DCFG_DEVADDR_MASK);
+	reg |= DWC3_DCFG_DEVADDR(addr);
+	dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+
+	if (addr)
+		dwc->dev_state = DWC3_ADDRESS_STATE;
+	else
+		dwc->dev_state = DWC3_DEFAULT_STATE;
+
+	return 0;
+}
+
+static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+{
+	int ret;
+
+	spin_unlock(&dwc->lock);
+	ret = dwc->gadget_driver->setup(&dwc->gadget, ctrl);
+	spin_lock(&dwc->lock);
+	return ret;
+}
+
+static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+{
+	u32 cfg;
+	int ret;
+
+	dwc->start_config_issued = false;
+	cfg = le16_to_cpu(ctrl->wValue);
+
+	switch (dwc->dev_state) {
+	case DWC3_DEFAULT_STATE:
+		return -EINVAL;
+		break;
+
+	case DWC3_ADDRESS_STATE:
+		ret = dwc3_ep0_delegate_req(dwc, ctrl);
+		/* if the cfg matches and the cfg is non zero */
+		if (!ret && cfg)
+			dwc->dev_state = DWC3_CONFIGURED_STATE;
+		break;
+
+	case DWC3_CONFIGURED_STATE:
+		ret = dwc3_ep0_delegate_req(dwc, ctrl);
+		if (!cfg)
+			dwc->dev_state = DWC3_ADDRESS_STATE;
+		break;
+	}
+	return 0;
+}
+
+static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+{
+	int ret;
+
+	switch (ctrl->bRequest) {
+	case USB_REQ_GET_STATUS:
+		dev_vdbg(dwc->dev, "USB_REQ_GET_STATUS\n");
+		ret = dwc3_ep0_handle_status(dwc, ctrl);
+		break;
+	case USB_REQ_CLEAR_FEATURE:
+		dev_vdbg(dwc->dev, "USB_REQ_CLEAR_FEATURE\n");
+		ret = dwc3_ep0_handle_feature(dwc, ctrl, 0);
+		break;
+	case USB_REQ_SET_FEATURE:
+		dev_vdbg(dwc->dev, "USB_REQ_SET_FEATURE\n");
+		ret = dwc3_ep0_handle_feature(dwc, ctrl, 1);
+		break;
+	case USB_REQ_SET_ADDRESS:
+		dev_vdbg(dwc->dev, "USB_REQ_SET_ADDRESS\n");
+		ret = dwc3_ep0_set_address(dwc, ctrl);
+		break;
+	case USB_REQ_SET_CONFIGURATION:
+		dev_vdbg(dwc->dev, "USB_REQ_SET_CONFIGURATION\n");
+		ret = dwc3_ep0_set_config(dwc, ctrl);
+		break;
+	default:
+		dev_vdbg(dwc->dev, "Forwarding to gadget driver\n");
+		ret = dwc3_ep0_delegate_req(dwc, ctrl);
+		break;
+	};
+
+	return ret;
+}
+
+static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event)
+{
+	struct usb_ctrlrequest *ctrl = dwc->ctrl_req;
+	int ret;
+	u32 len;
+
+	if (!dwc->gadget_driver)
+		goto err;
+
+	len = le16_to_cpu(ctrl->wLength);
+	if (!len) {
+		dwc->three_stage_setup = false;
+		dwc->ep0_expect_in = false;
+		dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
+	} else {
+		dwc->three_stage_setup = true;
+		dwc->ep0_expect_in = !!(ctrl->bRequestType & USB_DIR_IN);
+		dwc->ep0_next_event = DWC3_EP0_NRDY_DATA;
+	}
+
+	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
+		ret = dwc3_ep0_std_request(dwc, ctrl);
+	else
+		ret = dwc3_ep0_delegate_req(dwc, ctrl);
+
+	if (ret >= 0)
+		return;
+
+err:
+	dwc3_ep0_stall_and_restart(dwc);
+}
+
+static void dwc3_ep0_complete_data(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event)
+{
+	struct dwc3_request	*r = NULL;
+	struct usb_request	*ur;
+	struct dwc3_trb		trb;
+	struct dwc3_ep		*dep;
+	u32			transferred;
+	u8			epnum;
+
+	epnum = event->endpoint_number;
+	dep = dwc->eps[epnum];
+
+	dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
+
+	if (!dwc->ep0_status_pending) {
+		r = next_request(&dwc->eps[0]->request_list);
+		ur = &r->request;
+	} else {
+		ur = &dwc->ep0_usb_req;
+		dwc->ep0_status_pending = 0;
+	}
+
+	dwc3_trb_to_nat(dwc->ep0_trb, &trb);
+
+	if (dwc->ep0_bounced) {
+		struct dwc3_ep	*ep0 = dwc->eps[0];
+
+		transferred = min_t(u32, ur->length,
+				ep0->endpoint.maxpacket - trb.length);
+		memcpy(ur->buf, dwc->ep0_bounce, transferred);
+		dwc->ep0_bounced = false;
+	} else {
+		transferred = ur->length - trb.length;
+		ur->actual += transferred;
+	}
+
+	if ((epnum & 1) && ur->actual < ur->length) {
+		/* for some reason we did not get everything out */
+
+		dwc3_ep0_stall_and_restart(dwc);
+	} else {
+		/*
+		 * handle the case where we have to send a zero packet. This
+		 * seems to be case when req.length > maxpacket. Could it be?
+		 */
+		if (r)
+			dwc3_gadget_giveback(dep, r, 0);
+	}
+}
+
+static void dwc3_ep0_complete_req(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event)
+{
+	struct dwc3_request	*r;
+	struct dwc3_ep		*dep;
+
+	dep = dwc->eps[0];
+
+	if (!list_empty(&dep->request_list)) {
+		r = next_request(&dep->request_list);
+
+		dwc3_gadget_giveback(dep, r, 0);
+	}
+
+	dwc->ep0state = EP0_SETUP_PHASE;
+	dwc3_ep0_out_start(dwc);
+}
+
+static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
+			const struct dwc3_event_depevt *event)
+{
+	struct dwc3_ep		*dep = dwc->eps[event->endpoint_number];
+
+	dep->flags &= ~DWC3_EP_BUSY;
+
+	switch (dwc->ep0state) {
+	case EP0_SETUP_PHASE:
+		dev_vdbg(dwc->dev, "Inspecting Setup Bytes\n");
+		dwc3_ep0_inspect_setup(dwc, event);
+		break;
+
+	case EP0_DATA_PHASE:
+		dev_vdbg(dwc->dev, "Data Phase\n");
+		dwc3_ep0_complete_data(dwc, event);
+		break;
+
+	case EP0_STATUS_PHASE:
+		dev_vdbg(dwc->dev, "Status Phase\n");
+		dwc3_ep0_complete_req(dwc, event);
+		break;
+	default:
+		WARN(true, "UNKNOWN ep0state %d\n", dwc->ep0state);
+	}
+}
+
+static void dwc3_ep0_do_control_setup(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event)
+{
+	dwc->ep0state = EP0_SETUP_PHASE;
+	dwc3_ep0_out_start(dwc);
+}
+
+static void dwc3_ep0_do_control_data(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event)
+{
+	struct dwc3_ep		*dep;
+	struct dwc3_request	*req;
+	int			ret;
+
+	dep = dwc->eps[0];
+	dwc->ep0state = EP0_DATA_PHASE;
+
+	if (dwc->ep0_status_pending) {
+		dwc3_ep0_send_status_response(dwc);
+		return;
+	}
+
+	if (list_empty(&dep->request_list)) {
+		dev_vdbg(dwc->dev, "pending request for EP0 Data phase\n");
+		dep->flags |= DWC3_EP_PENDING_REQUEST;
+
+		if (event->endpoint_number)
+			dep->flags |= DWC3_EP0_DIR_IN;
+		return;
+	}
+
+	req = next_request(&dep->request_list);
+	req->direction = !!event->endpoint_number;
+
+	dwc->ep0state = EP0_DATA_PHASE;
+	if (req->request.length == 0) {
+		ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
+				dwc->ctrl_req_addr, 0,
+				DWC3_TRBCTL_CONTROL_DATA);
+	} else if ((req->request.length % dep->endpoint.maxpacket)
+			&& (event->endpoint_number == 0)) {
+		dwc3_map_buffer_to_dma(req);
+
+		WARN_ON(req->request.length > dep->endpoint.maxpacket);
+
+		dwc->ep0_bounced = true;
+
+		/*
+		 * REVISIT in case request length is bigger than EP0
+		 * wMaxPacketSize, we will need two chained TRBs to handle
+		 * the transfer.
+		 */
+		ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
+				dwc->ep0_bounce_addr, dep->endpoint.maxpacket,
+				DWC3_TRBCTL_CONTROL_DATA);
+	} else {
+		dwc3_map_buffer_to_dma(req);
+
+		ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
+				req->request.dma, req->request.length,
+				DWC3_TRBCTL_CONTROL_DATA);
+	}
+
+	WARN_ON(ret < 0);
+}
+
+static void dwc3_ep0_do_control_status(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event)
+{
+	u32			type;
+	int			ret;
+
+	dwc->ep0state = EP0_STATUS_PHASE;
+
+	type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
+		: DWC3_TRBCTL_CONTROL_STATUS2;
+
+	ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
+			dwc->ctrl_req_addr, 0, type);
+
+	WARN_ON(ret < 0);
+}
+
+static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event)
+{
+	switch (event->status) {
+	case DEPEVT_STATUS_CONTROL_SETUP:
+		dev_vdbg(dwc->dev, "Control Setup\n");
+		dwc3_ep0_do_control_setup(dwc, event);
+		break;
+
+	case DEPEVT_STATUS_CONTROL_DATA:
+		dev_vdbg(dwc->dev, "Control Data\n");
+
+		if (dwc->ep0_next_event != DWC3_EP0_NRDY_DATA) {
+			dev_vdbg(dwc->dev, "Expected %d got %d\n",
+					dwc->ep0_next_event,
+					DWC3_EP0_NRDY_DATA);
+
+			dwc3_ep0_stall_and_restart(dwc);
+			return;
+		}
+
+		/*
+		 * One of the possible error cases is when Host _does_
+		 * request for Data Phase, but it does so on the wrong
+		 * direction.
+		 *
+		 * Here, we already know ep0_next_event is DATA (see above),
+		 * so we only need to check for direction.
+		 */
+		if (dwc->ep0_expect_in != event->endpoint_number) {
+			dev_vdbg(dwc->dev, "Wrong direction for Data phase\n");
+			dwc3_ep0_stall_and_restart(dwc);
+			return;
+		}
+
+		dwc3_ep0_do_control_data(dwc, event);
+		break;
+
+	case DEPEVT_STATUS_CONTROL_STATUS:
+		dev_vdbg(dwc->dev, "Control Status\n");
+
+		if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS) {
+			dev_vdbg(dwc->dev, "Expected %d got %d\n",
+					dwc->ep0_next_event,
+					DWC3_EP0_NRDY_STATUS);
+
+			dwc3_ep0_stall_and_restart(dwc);
+			return;
+		}
+		dwc3_ep0_do_control_status(dwc, event);
+	}
+}
+
+void dwc3_ep0_interrupt(struct dwc3 *dwc,
+		const const struct dwc3_event_depevt *event)
+{
+	u8			epnum = event->endpoint_number;
+
+	dev_dbg(dwc->dev, "%s while ep%d%s in state '%s'\n",
+			dwc3_ep_event_string(event->endpoint_event),
+			epnum >> 1, (epnum & 1) ? "in" : "out",
+			dwc3_ep0_state_string(dwc->ep0state));
+
+	switch (event->endpoint_event) {
+	case DWC3_DEPEVT_XFERCOMPLETE:
+		dwc3_ep0_xfer_complete(dwc, event);
+		break;
+
+	case DWC3_DEPEVT_XFERNOTREADY:
+		dwc3_ep0_xfernotready(dwc, event);
+		break;
+
+	case DWC3_DEPEVT_XFERINPROGRESS:
+	case DWC3_DEPEVT_RXTXFIFOEVT:
+	case DWC3_DEPEVT_STREAMEVT:
+	case DWC3_DEPEVT_EPCMDCMPLT:
+		break;
+	}
+}
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
new file mode 100644
index 0000000..fa824cf
--- /dev/null
+++ b/drivers/usb/dwc3/gadget.c
@@ -0,0 +1,2104 @@
+/**
+ * gadget.c - DesignWare USB3 DRD Controller Gadget Framework Link
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include "core.h"
+#include "gadget.h"
+#include "io.h"
+
+#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
+
+void dwc3_map_buffer_to_dma(struct dwc3_request *req)
+{
+	struct dwc3			*dwc = req->dep->dwc;
+
+	if (req->request.length == 0) {
+		/* req->request.dma = dwc->setup_buf_addr; */
+		return;
+	}
+
+	if (req->request.dma == DMA_ADDR_INVALID) {
+		req->request.dma = dma_map_single(dwc->dev, req->request.buf,
+				req->request.length, req->direction
+				? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		req->mapped = true;
+	}
+}
+
+void dwc3_unmap_buffer_from_dma(struct dwc3_request *req)
+{
+	struct dwc3			*dwc = req->dep->dwc;
+
+	if (req->request.length == 0) {
+		req->request.dma = DMA_ADDR_INVALID;
+		return;
+	}
+
+	if (req->mapped) {
+		dma_unmap_single(dwc->dev, req->request.dma,
+				req->request.length, req->direction
+				? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		req->mapped = 0;
+		req->request.dma = DMA_ADDR_INVALID;
+	}
+}
+
+void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
+		int status)
+{
+	struct dwc3			*dwc = dep->dwc;
+
+	if (req->queued) {
+		dep->busy_slot++;
+		/*
+		 * Skip LINK TRB. We can't use req->trb and check for
+		 * DWC3_TRBCTL_LINK_TRB because it points the TRB we just
+		 * completed (not the LINK TRB).
+		 */
+		if (((dep->busy_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) &&
+				usb_endpoint_xfer_isoc(dep->desc))
+			dep->busy_slot++;
+	}
+	list_del(&req->list);
+
+	if (req->request.status == -EINPROGRESS)
+		req->request.status = status;
+
+	dwc3_unmap_buffer_from_dma(req);
+
+	dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n",
+			req, dep->name, req->request.actual,
+			req->request.length, status);
+
+	spin_unlock(&dwc->lock);
+	req->request.complete(&req->dep->endpoint, &req->request);
+	spin_lock(&dwc->lock);
+}
+
+static const char *dwc3_gadget_ep_cmd_string(u8 cmd)
+{
+	switch (cmd) {
+	case DWC3_DEPCMD_DEPSTARTCFG:
+		return "Start New Configuration";
+	case DWC3_DEPCMD_ENDTRANSFER:
+		return "End Transfer";
+	case DWC3_DEPCMD_UPDATETRANSFER:
+		return "Update Transfer";
+	case DWC3_DEPCMD_STARTTRANSFER:
+		return "Start Transfer";
+	case DWC3_DEPCMD_CLEARSTALL:
+		return "Clear Stall";
+	case DWC3_DEPCMD_SETSTALL:
+		return "Set Stall";
+	case DWC3_DEPCMD_GETSEQNUMBER:
+		return "Get Data Sequence Number";
+	case DWC3_DEPCMD_SETTRANSFRESOURCE:
+		return "Set Endpoint Transfer Resource";
+	case DWC3_DEPCMD_SETEPCONFIG:
+		return "Set Endpoint Configuration";
+	default:
+		return "UNKNOWN command";
+	}
+}
+
+int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
+		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
+{
+	struct dwc3_ep		*dep = dwc->eps[ep];
+	u32			timeout = 500;
+	u32			reg;
+
+	dev_vdbg(dwc->dev, "%s: cmd '%s' params %08x %08x %08x\n",
+			dep->name,
+			dwc3_gadget_ep_cmd_string(cmd), params->param0,
+			params->param1, params->param2);
+
+	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0);
+	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1);
+	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR2(ep), params->param2);
+
+	dwc3_writel(dwc->regs, DWC3_DEPCMD(ep), cmd | DWC3_DEPCMD_CMDACT);
+	do {
+		reg = dwc3_readl(dwc->regs, DWC3_DEPCMD(ep));
+		if (!(reg & DWC3_DEPCMD_CMDACT)) {
+			dev_vdbg(dwc->dev, "Command Complete --> %d\n",
+					DWC3_DEPCMD_STATUS(reg));
+			return 0;
+		}
+
+		/*
+		 * We can't sleep here, because it is also called from
+		 * interrupt context.
+		 */
+		timeout--;
+		if (!timeout)
+			return -ETIMEDOUT;
+
+		udelay(1);
+	} while (1);
+}
+
+static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep,
+		struct dwc3_trb_hw *trb)
+{
+	u32		offset = (char *) trb - (char *) dep->trb_pool;
+
+	return dep->trb_pool_dma + offset;
+}
+
+static int dwc3_alloc_trb_pool(struct dwc3_ep *dep)
+{
+	struct dwc3		*dwc = dep->dwc;
+
+	if (dep->trb_pool)
+		return 0;
+
+	if (dep->number == 0 || dep->number == 1)
+		return 0;
+
+	dep->trb_pool = dma_alloc_coherent(dwc->dev,
+			sizeof(struct dwc3_trb) * DWC3_TRB_NUM,
+			&dep->trb_pool_dma, GFP_KERNEL);
+	if (!dep->trb_pool) {
+		dev_err(dep->dwc->dev, "failed to allocate trb pool for %s\n",
+				dep->name);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void dwc3_free_trb_pool(struct dwc3_ep *dep)
+{
+	struct dwc3		*dwc = dep->dwc;
+
+	dma_free_coherent(dwc->dev, sizeof(struct dwc3_trb) * DWC3_TRB_NUM,
+			dep->trb_pool, dep->trb_pool_dma);
+
+	dep->trb_pool = NULL;
+	dep->trb_pool_dma = 0;
+}
+
+static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep)
+{
+	struct dwc3_gadget_ep_cmd_params params;
+	u32			cmd;
+
+	memset(&params, 0x00, sizeof(params));
+
+	if (dep->number != 1) {
+		cmd = DWC3_DEPCMD_DEPSTARTCFG;
+		/* XferRscIdx == 0 for ep0 and 2 for the remaining */
+		if (dep->number > 1) {
+			if (dwc->start_config_issued)
+				return 0;
+			dwc->start_config_issued = true;
+			cmd |= DWC3_DEPCMD_PARAM(2);
+		}
+
+		return dwc3_send_gadget_ep_cmd(dwc, 0, cmd, &params);
+	}
+
+	return 0;
+}
+
+static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct dwc3_gadget_ep_cmd_params params;
+
+	memset(&params, 0x00, sizeof(params));
+
+	params.param0 = DWC3_DEPCFG_EP_TYPE(usb_endpoint_type(desc))
+		| DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc))
+		| DWC3_DEPCFG_BURST_SIZE(dep->endpoint.maxburst);
+
+	params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN
+		| DWC3_DEPCFG_XFER_NOT_READY_EN;
+
+	if (usb_endpoint_xfer_bulk(desc) && dep->endpoint.max_streams) {
+		params.param1 |= DWC3_DEPCFG_STREAM_CAPABLE
+			| DWC3_DEPCFG_STREAM_EVENT_EN;
+		dep->stream_capable = true;
+	}
+
+	if (usb_endpoint_xfer_isoc(desc))
+		params.param1 |= DWC3_DEPCFG_XFER_IN_PROGRESS_EN;
+
+	/*
+	 * We are doing 1:1 mapping for endpoints, meaning
+	 * Physical Endpoints 2 maps to Logical Endpoint 2 and
+	 * so on. We consider the direction bit as part of the physical
+	 * endpoint number. So USB endpoint 0x81 is 0x03.
+	 */
+	params.param1 |= DWC3_DEPCFG_EP_NUMBER(dep->number);
+
+	/*
+	 * We must use the lower 16 TX FIFOs even though
+	 * HW might have more
+	 */
+	if (dep->direction)
+		params.param0 |= DWC3_DEPCFG_FIFO_NUMBER(dep->number >> 1);
+
+	if (desc->bInterval) {
+		params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(desc->bInterval - 1);
+		dep->interval = 1 << (desc->bInterval - 1);
+	}
+
+	return dwc3_send_gadget_ep_cmd(dwc, dep->number,
+			DWC3_DEPCMD_SETEPCONFIG, &params);
+}
+
+static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep)
+{
+	struct dwc3_gadget_ep_cmd_params params;
+
+	memset(&params, 0x00, sizeof(params));
+
+	params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1);
+
+	return dwc3_send_gadget_ep_cmd(dwc, dep->number,
+			DWC3_DEPCMD_SETTRANSFRESOURCE, &params);
+}
+
+/**
+ * __dwc3_gadget_ep_enable - Initializes a HW endpoint
+ * @dep: endpoint to be initialized
+ * @desc: USB Endpoint Descriptor
+ *
+ * Caller should take care of locking
+ */
+static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct dwc3		*dwc = dep->dwc;
+	u32			reg;
+	int			ret = -ENOMEM;
+
+	if (!(dep->flags & DWC3_EP_ENABLED)) {
+		ret = dwc3_gadget_start_config(dwc, dep);
+		if (ret)
+			return ret;
+	}
+
+	ret = dwc3_gadget_set_ep_config(dwc, dep, desc);
+	if (ret)
+		return ret;
+
+	if (!(dep->flags & DWC3_EP_ENABLED)) {
+		struct dwc3_trb_hw	*trb_st_hw;
+		struct dwc3_trb_hw	*trb_link_hw;
+		struct dwc3_trb		trb_link;
+
+		ret = dwc3_gadget_set_xfer_resource(dwc, dep);
+		if (ret)
+			return ret;
+
+		dep->desc = desc;
+		dep->type = usb_endpoint_type(desc);
+		dep->flags |= DWC3_EP_ENABLED;
+
+		reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
+		reg |= DWC3_DALEPENA_EP(dep->number);
+		dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
+
+		if (!usb_endpoint_xfer_isoc(desc))
+			return 0;
+
+		memset(&trb_link, 0, sizeof(trb_link));
+
+		/* Link TRB for ISOC. The HWO but is never reset */
+		trb_st_hw = &dep->trb_pool[0];
+
+		trb_link.bplh = dwc3_trb_dma_offset(dep, trb_st_hw);
+		trb_link.trbctl = DWC3_TRBCTL_LINK_TRB;
+		trb_link.hwo = true;
+
+		trb_link_hw = &dep->trb_pool[DWC3_TRB_NUM - 1];
+		dwc3_trb_to_hw(&trb_link, trb_link_hw);
+	}
+
+	return 0;
+}
+
+static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum);
+static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep)
+{
+	struct dwc3_request		*req;
+
+	if (!list_empty(&dep->req_queued))
+		dwc3_stop_active_transfer(dwc, dep->number);
+
+	while (!list_empty(&dep->request_list)) {
+		req = next_request(&dep->request_list);
+
+		dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
+	}
+}
+
+/**
+ * __dwc3_gadget_ep_disable - Disables a HW endpoint
+ * @dep: the endpoint to disable
+ *
+ * This function also removes requests which are currently processed ny the
+ * hardware and those which are not yet scheduled.
+ * Caller should take care of locking.
+ */
+static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
+{
+	struct dwc3		*dwc = dep->dwc;
+	u32			reg;
+
+	dwc3_remove_requests(dwc, dep);
+
+	reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
+	reg &= ~DWC3_DALEPENA_EP(dep->number);
+	dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
+
+	dep->stream_capable = false;
+	dep->desc = NULL;
+	dep->type = 0;
+	dep->flags = 0;
+
+	return 0;
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int dwc3_gadget_ep0_enable(struct usb_ep *ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	return -EINVAL;
+}
+
+static int dwc3_gadget_ep0_disable(struct usb_ep *ep)
+{
+	return -EINVAL;
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int dwc3_gadget_ep_enable(struct usb_ep *ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct dwc3_ep			*dep;
+	struct dwc3			*dwc;
+	unsigned long			flags;
+	int				ret;
+
+	if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) {
+		pr_debug("dwc3: invalid parameters\n");
+		return -EINVAL;
+	}
+
+	if (!desc->wMaxPacketSize) {
+		pr_debug("dwc3: missing wMaxPacketSize\n");
+		return -EINVAL;
+	}
+
+	dep = to_dwc3_ep(ep);
+	dwc = dep->dwc;
+
+	switch (usb_endpoint_type(desc)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		strncat(dep->name, "-control", sizeof(dep->name));
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		strncat(dep->name, "-isoc", sizeof(dep->name));
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		strncat(dep->name, "-bulk", sizeof(dep->name));
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		strncat(dep->name, "-int", sizeof(dep->name));
+		break;
+	default:
+		dev_err(dwc->dev, "invalid endpoint transfer type\n");
+	}
+
+	if (dep->flags & DWC3_EP_ENABLED) {
+		dev_WARN_ONCE(dwc->dev, true, "%s is already enabled\n",
+				dep->name);
+		return 0;
+	}
+
+	dev_vdbg(dwc->dev, "Enabling %s\n", dep->name);
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	ret = __dwc3_gadget_ep_enable(dep, desc);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+static int dwc3_gadget_ep_disable(struct usb_ep *ep)
+{
+	struct dwc3_ep			*dep;
+	struct dwc3			*dwc;
+	unsigned long			flags;
+	int				ret;
+
+	if (!ep) {
+		pr_debug("dwc3: invalid parameters\n");
+		return -EINVAL;
+	}
+
+	dep = to_dwc3_ep(ep);
+	dwc = dep->dwc;
+
+	if (!(dep->flags & DWC3_EP_ENABLED)) {
+		dev_WARN_ONCE(dwc->dev, true, "%s is already disabled\n",
+				dep->name);
+		return 0;
+	}
+
+	snprintf(dep->name, sizeof(dep->name), "ep%d%s",
+			dep->number >> 1,
+			(dep->number & 1) ? "in" : "out");
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	ret = __dwc3_gadget_ep_disable(dep);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+static struct usb_request *dwc3_gadget_ep_alloc_request(struct usb_ep *ep,
+	gfp_t gfp_flags)
+{
+	struct dwc3_request		*req;
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
+	struct dwc3			*dwc = dep->dwc;
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req) {
+		dev_err(dwc->dev, "not enough memory\n");
+		return NULL;
+	}
+
+	req->epnum	= dep->number;
+	req->dep	= dep;
+	req->request.dma = DMA_ADDR_INVALID;
+
+	return &req->request;
+}
+
+static void dwc3_gadget_ep_free_request(struct usb_ep *ep,
+		struct usb_request *request)
+{
+	struct dwc3_request		*req = to_dwc3_request(request);
+
+	kfree(req);
+}
+
+/*
+ * dwc3_prepare_trbs - setup TRBs from requests
+ * @dep: endpoint for which requests are being prepared
+ * @starting: true if the endpoint is idle and no requests are queued.
+ *
+ * The functions goes through the requests list and setups TRBs for the
+ * transfers. The functions returns once there are not more TRBs available or
+ * it run out of requests.
+ */
+static struct dwc3_request *dwc3_prepare_trbs(struct dwc3_ep *dep,
+		bool starting)
+{
+	struct dwc3_request	*req, *n, *ret = NULL;
+	struct dwc3_trb_hw	*trb_hw;
+	struct dwc3_trb		trb;
+	u32			trbs_left;
+
+	BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);
+
+	/* the first request must not be queued */
+	trbs_left = (dep->busy_slot - dep->free_slot) & DWC3_TRB_MASK;
+	/*
+	 * if busy & slot are equal than it is either full or empty. If we are
+	 * starting to proceed requests then we are empty. Otherwise we ar
+	 * full and don't do anything
+	 */
+	if (!trbs_left) {
+		if (!starting)
+			return NULL;
+		trbs_left = DWC3_TRB_NUM;
+		/*
+		 * In case we start from scratch, we queue the ISOC requests
+		 * starting from slot 1. This is done because we use ring
+		 * buffer and have no LST bit to stop us. Instead, we place
+		 * IOC bit TRB_NUM/4. We try to avoid to having an interrupt
+		 * after the first request so we start at slot 1 and have
+		 * 7 requests proceed before we hit the first IOC.
+		 * Other transfer types don't use the ring buffer and are
+		 * processed from the first TRB until the last one. Since we
+		 * don't wrap around we have to start at the beginning.
+		 */
+		if (usb_endpoint_xfer_isoc(dep->desc)) {
+			dep->busy_slot = 1;
+			dep->free_slot = 1;
+		} else {
+			dep->busy_slot = 0;
+			dep->free_slot = 0;
+		}
+	}
+
+	/* The last TRB is a link TRB, not used for xfer */
+	if ((trbs_left <= 1) && usb_endpoint_xfer_isoc(dep->desc))
+		return NULL;
+
+	list_for_each_entry_safe(req, n, &dep->request_list, list) {
+		unsigned int last_one = 0;
+		unsigned int cur_slot;
+
+		trb_hw = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK];
+		cur_slot = dep->free_slot;
+		dep->free_slot++;
+
+		/* Skip the LINK-TRB on ISOC */
+		if (((cur_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) &&
+				usb_endpoint_xfer_isoc(dep->desc))
+			continue;
+
+		dwc3_gadget_move_request_queued(req);
+		memset(&trb, 0, sizeof(trb));
+		trbs_left--;
+
+		/* Is our TRB pool empty? */
+		if (!trbs_left)
+			last_one = 1;
+		/* Is this the last request? */
+		if (list_empty(&dep->request_list))
+			last_one = 1;
+
+		/*
+		 * FIXME we shouldn't need to set LST bit always but we are
+		 * facing some weird problem with the Hardware where it doesn't
+		 * complete even though it has been previously started.
+		 *
+		 * While we're debugging the problem, as a workaround to
+		 * multiple TRBs handling, use only one TRB at a time.
+		 */
+		last_one = 1;
+
+		req->trb = trb_hw;
+		if (!ret)
+			ret = req;
+
+		trb.bplh = req->request.dma;
+
+		if (usb_endpoint_xfer_isoc(dep->desc)) {
+			trb.isp_imi = true;
+			trb.csp = true;
+		} else {
+			trb.lst = last_one;
+		}
+
+		if (usb_endpoint_xfer_bulk(dep->desc) && dep->stream_capable)
+			trb.sid_sofn = req->request.stream_id;
+
+		switch (usb_endpoint_type(dep->desc)) {
+		case USB_ENDPOINT_XFER_CONTROL:
+			trb.trbctl = DWC3_TRBCTL_CONTROL_SETUP;
+			break;
+
+		case USB_ENDPOINT_XFER_ISOC:
+			trb.trbctl = DWC3_TRBCTL_ISOCHRONOUS_FIRST;
+
+			/* IOC every DWC3_TRB_NUM / 4 so we can refill */
+			if (!(cur_slot % (DWC3_TRB_NUM / 4)))
+				trb.ioc = last_one;
+			break;
+
+		case USB_ENDPOINT_XFER_BULK:
+		case USB_ENDPOINT_XFER_INT:
+			trb.trbctl = DWC3_TRBCTL_NORMAL;
+			break;
+		default:
+			/*
+			 * This is only possible with faulty memory because we
+			 * checked it already :)
+			 */
+			BUG();
+		}
+
+		trb.length	= req->request.length;
+		trb.hwo = true;
+
+		dwc3_trb_to_hw(&trb, trb_hw);
+		req->trb_dma = dwc3_trb_dma_offset(dep, trb_hw);
+
+		if (last_one)
+			break;
+	}
+
+	return ret;
+}
+
+static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
+		int start_new)
+{
+	struct dwc3_gadget_ep_cmd_params params;
+	struct dwc3_request		*req;
+	struct dwc3			*dwc = dep->dwc;
+	int				ret;
+	u32				cmd;
+
+	if (start_new && (dep->flags & DWC3_EP_BUSY)) {
+		dev_vdbg(dwc->dev, "%s: endpoint busy\n", dep->name);
+		return -EBUSY;
+	}
+	dep->flags &= ~DWC3_EP_PENDING_REQUEST;
+
+	/*
+	 * If we are getting here after a short-out-packet we don't enqueue any
+	 * new requests as we try to set the IOC bit only on the last request.
+	 */
+	if (start_new) {
+		if (list_empty(&dep->req_queued))
+			dwc3_prepare_trbs(dep, start_new);
+
+		/* req points to the first request which will be sent */
+		req = next_request(&dep->req_queued);
+	} else {
+		/*
+		 * req points to the first request where HWO changed
+		 * from 0 to 1
+		 */
+		req = dwc3_prepare_trbs(dep, start_new);
+	}
+	if (!req) {
+		dep->flags |= DWC3_EP_PENDING_REQUEST;
+		return 0;
+	}
+
+	memset(&params, 0, sizeof(params));
+	params.param0 = upper_32_bits(req->trb_dma);
+	params.param1 = lower_32_bits(req->trb_dma);
+
+	if (start_new)
+		cmd = DWC3_DEPCMD_STARTTRANSFER;
+	else
+		cmd = DWC3_DEPCMD_UPDATETRANSFER;
+
+	cmd |= DWC3_DEPCMD_PARAM(cmd_param);
+	ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
+	if (ret < 0) {
+		dev_dbg(dwc->dev, "failed to send STARTTRANSFER command\n");
+
+		/*
+		 * FIXME we need to iterate over the list of requests
+		 * here and stop, unmap, free and del each of the linked
+		 * requests instead of we do now.
+		 */
+		dwc3_unmap_buffer_from_dma(req);
+		list_del(&req->list);
+		return ret;
+	}
+
+	dep->flags |= DWC3_EP_BUSY;
+	dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc,
+			dep->number);
+	if (!dep->res_trans_idx)
+		printk_once(KERN_ERR "%s() res_trans_idx is invalid\n", __func__);
+	return 0;
+}
+
+static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
+{
+	req->request.actual	= 0;
+	req->request.status	= -EINPROGRESS;
+	req->direction		= dep->direction;
+	req->epnum		= dep->number;
+
+	/*
+	 * We only add to our list of requests now and
+	 * start consuming the list once we get XferNotReady
+	 * IRQ.
+	 *
+	 * That way, we avoid doing anything that we don't need
+	 * to do now and defer it until the point we receive a
+	 * particular token from the Host side.
+	 *
+	 * This will also avoid Host cancelling URBs due to too
+	 * many NACKs.
+	 */
+	dwc3_map_buffer_to_dma(req);
+	list_add_tail(&req->list, &dep->request_list);
+
+	/*
+	 * There is one special case: XferNotReady with
+	 * empty list of requests. We need to kick the
+	 * transfer here in that situation, otherwise
+	 * we will be NAKing forever.
+	 *
+	 * If we get XferNotReady before gadget driver
+	 * has a chance to queue a request, we will ACK
+	 * the IRQ but won't be able to receive the data
+	 * until the next request is queued. The following
+	 * code is handling exactly that.
+	 */
+	if (dep->flags & DWC3_EP_PENDING_REQUEST) {
+		int ret;
+		int start_trans;
+
+		start_trans = 1;
+		if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
+				dep->flags & DWC3_EP_BUSY)
+			start_trans = 0;
+
+		ret =  __dwc3_gadget_kick_transfer(dep, 0, start_trans);
+		if (ret && ret != -EBUSY) {
+			struct dwc3	*dwc = dep->dwc;
+
+			dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
+					dep->name);
+		}
+	};
+
+	return 0;
+}
+
+static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
+	gfp_t gfp_flags)
+{
+	struct dwc3_request		*req = to_dwc3_request(request);
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
+	struct dwc3			*dwc = dep->dwc;
+
+	unsigned long			flags;
+
+	int				ret;
+
+	if (!dep->desc) {
+		dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n",
+				request, ep->name);
+		return -ESHUTDOWN;
+	}
+
+	dev_vdbg(dwc->dev, "queing request %p to %s length %d\n",
+			request, ep->name, request->length);
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	ret = __dwc3_gadget_ep_queue(dep, req);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
+		struct usb_request *request)
+{
+	struct dwc3_request		*req = to_dwc3_request(request);
+	struct dwc3_request		*r = NULL;
+
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
+	struct dwc3			*dwc = dep->dwc;
+
+	unsigned long			flags;
+	int				ret = 0;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+
+	list_for_each_entry(r, &dep->request_list, list) {
+		if (r == req)
+			break;
+	}
+
+	if (r != req) {
+		list_for_each_entry(r, &dep->req_queued, list) {
+			if (r == req)
+				break;
+		}
+		if (r == req) {
+			/* wait until it is processed */
+			dwc3_stop_active_transfer(dwc, dep->number);
+			goto out0;
+		}
+		dev_err(dwc->dev, "request %p was not queued to %s\n",
+				request, ep->name);
+		ret = -EINVAL;
+		goto out0;
+	}
+
+	/* giveback the request */
+	dwc3_gadget_giveback(dep, req, -ECONNRESET);
+
+out0:
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value)
+{
+	struct dwc3_gadget_ep_cmd_params	params;
+	struct dwc3				*dwc = dep->dwc;
+	int					ret;
+
+	memset(&params, 0x00, sizeof(params));
+
+	if (value) {
+		if (dep->number == 0 || dep->number == 1) {
+			/*
+			 * Whenever EP0 is stalled, we will restart
+			 * the state machine, thus moving back to
+			 * Setup Phase
+			 */
+			dwc->ep0state = EP0_SETUP_PHASE;
+		}
+
+		ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
+			DWC3_DEPCMD_SETSTALL, &params);
+		if (ret)
+			dev_err(dwc->dev, "failed to %s STALL on %s\n",
+					value ? "set" : "clear",
+					dep->name);
+		else
+			dep->flags |= DWC3_EP_STALL;
+	} else {
+		if (dep->flags & DWC3_EP_WEDGE)
+			return 0;
+
+		ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
+			DWC3_DEPCMD_CLEARSTALL, &params);
+		if (ret)
+			dev_err(dwc->dev, "failed to %s STALL on %s\n",
+					value ? "set" : "clear",
+					dep->name);
+		else
+			dep->flags &= ~DWC3_EP_STALL;
+	}
+
+	return ret;
+}
+
+static int dwc3_gadget_ep_set_halt(struct usb_ep *ep, int value)
+{
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
+	struct dwc3			*dwc = dep->dwc;
+
+	unsigned long			flags;
+
+	int				ret;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+
+	if (usb_endpoint_xfer_isoc(dep->desc)) {
+		dev_err(dwc->dev, "%s is of Isochronous type\n", dep->name);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = __dwc3_gadget_ep_set_halt(dep, value);
+out:
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+static int dwc3_gadget_ep_set_wedge(struct usb_ep *ep)
+{
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
+
+	dep->flags |= DWC3_EP_WEDGE;
+
+	return dwc3_gadget_ep_set_halt(ep, 1);
+}
+
+/* -------------------------------------------------------------------------- */
+
+static struct usb_endpoint_descriptor dwc3_gadget_ep0_desc = {
+	.bLength	= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+	.bmAttributes	= USB_ENDPOINT_XFER_CONTROL,
+};
+
+static const struct usb_ep_ops dwc3_gadget_ep0_ops = {
+	.enable		= dwc3_gadget_ep0_enable,
+	.disable	= dwc3_gadget_ep0_disable,
+	.alloc_request	= dwc3_gadget_ep_alloc_request,
+	.free_request	= dwc3_gadget_ep_free_request,
+	.queue		= dwc3_gadget_ep0_queue,
+	.dequeue	= dwc3_gadget_ep_dequeue,
+	.set_halt	= dwc3_gadget_ep_set_halt,
+	.set_wedge	= dwc3_gadget_ep_set_wedge,
+};
+
+static const struct usb_ep_ops dwc3_gadget_ep_ops = {
+	.enable		= dwc3_gadget_ep_enable,
+	.disable	= dwc3_gadget_ep_disable,
+	.alloc_request	= dwc3_gadget_ep_alloc_request,
+	.free_request	= dwc3_gadget_ep_free_request,
+	.queue		= dwc3_gadget_ep_queue,
+	.dequeue	= dwc3_gadget_ep_dequeue,
+	.set_halt	= dwc3_gadget_ep_set_halt,
+	.set_wedge	= dwc3_gadget_ep_set_wedge,
+};
+
+/* -------------------------------------------------------------------------- */
+
+static int dwc3_gadget_get_frame(struct usb_gadget *g)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+	u32			reg;
+
+	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+	return DWC3_DSTS_SOFFN(reg);
+}
+
+static int dwc3_gadget_wakeup(struct usb_gadget *g)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+
+	unsigned long		timeout;
+	unsigned long		flags;
+
+	u32			reg;
+
+	int			ret = 0;
+
+	u8			link_state;
+	u8			speed;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+
+	/*
+	 * According to the Databook Remote wakeup request should
+	 * be issued only when the device is in early suspend state.
+	 *
+	 * We can check that via USB Link State bits in DSTS register.
+	 */
+	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+
+	speed = reg & DWC3_DSTS_CONNECTSPD;
+	if (speed == DWC3_DSTS_SUPERSPEED) {
+		dev_dbg(dwc->dev, "no wakeup on SuperSpeed\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	link_state = DWC3_DSTS_USBLNKST(reg);
+
+	switch (link_state) {
+	case DWC3_LINK_STATE_RX_DET:	/* in HS, means Early Suspend */
+	case DWC3_LINK_STATE_U3:	/* in HS, means SUSPEND */
+		break;
+	default:
+		dev_dbg(dwc->dev, "can't wakeup from link state %d\n",
+				link_state);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+
+	/*
+	 * Switch link state to Recovery. In HS/FS/LS this means
+	 * RemoteWakeup Request
+	 */
+	reg |= DWC3_DCTL_ULSTCHNG_RECOVERY;
+	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
+	/* wait for at least 2000us */
+	usleep_range(2000, 2500);
+
+	/* write zeroes to Link Change Request */
+	reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
+	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
+	/* pool until Link State change to ON */
+	timeout = jiffies + msecs_to_jiffies(100);
+
+	while (!(time_after(jiffies, timeout))) {
+		reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+
+		/* in HS, means ON */
+		if (DWC3_DSTS_USBLNKST(reg) == DWC3_LINK_STATE_U0)
+			break;
+	}
+
+	if (DWC3_DSTS_USBLNKST(reg) != DWC3_LINK_STATE_U0) {
+		dev_err(dwc->dev, "failed to send remote wakeup\n");
+		ret = -EINVAL;
+	}
+
+out:
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+static int dwc3_gadget_set_selfpowered(struct usb_gadget *g,
+		int is_selfpowered)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+
+	dwc->is_selfpowered = !!is_selfpowered;
+
+	return 0;
+}
+
+static void dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on)
+{
+	u32			reg;
+	u32			timeout = 500;
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+	if (is_on)
+		reg |= DWC3_DCTL_RUN_STOP;
+	else
+		reg &= ~DWC3_DCTL_RUN_STOP;
+
+	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
+	do {
+		reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+		if (is_on) {
+			if (!(reg & DWC3_DSTS_DEVCTRLHLT))
+				break;
+		} else {
+			if (reg & DWC3_DSTS_DEVCTRLHLT)
+				break;
+		}
+		timeout--;
+		if (!timeout)
+			break;
+		udelay(1);
+	} while (1);
+
+	dev_vdbg(dwc->dev, "gadget %s data soft-%s\n",
+			dwc->gadget_driver
+			? dwc->gadget_driver->function : "no-function",
+			is_on ? "connect" : "disconnect");
+}
+
+static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+	unsigned long		flags;
+
+	is_on = !!is_on;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	dwc3_gadget_run_stop(dwc, is_on);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return 0;
+}
+
+static int dwc3_gadget_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+	struct dwc3_ep		*dep;
+	unsigned long		flags;
+	int			ret = 0;
+	u32			reg;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+
+	if (dwc->gadget_driver) {
+		dev_err(dwc->dev, "%s is already bound to %s\n",
+				dwc->gadget.name,
+				dwc->gadget_driver->driver.name);
+		ret = -EBUSY;
+		goto err0;
+	}
+
+	dwc->gadget_driver	= driver;
+	dwc->gadget.dev.driver	= &driver->driver;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+
+	reg &= ~DWC3_GCTL_SCALEDOWN(3);
+	reg &= ~DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG);
+	reg &= ~DWC3_GCTL_DISSCRAMBLE;
+	reg |= DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_DEVICE);
+
+	switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams0)) {
+	case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
+		reg &= ~DWC3_GCTL_DSBLCLKGTNG;
+		break;
+	default:
+		dev_dbg(dwc->dev, "No power optimization available\n");
+	}
+
+	/*
+	 * WORKAROUND: DWC3 revisions <1.90a have a bug
+	 * when The device fails to connect at SuperSpeed
+	 * and falls back to high-speed mode which causes
+	 * the device to enter in a Connect/Disconnect loop
+	 */
+	if (dwc->revision < DWC3_REVISION_190A)
+		reg |= DWC3_GCTL_U2RSTECN;
+
+	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCFG);
+	reg &= ~(DWC3_DCFG_SPEED_MASK);
+	reg |= DWC3_DCFG_SUPERSPEED;
+	dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+
+	dwc->start_config_issued = false;
+
+	/* Start with SuperSpeed Default */
+	dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
+
+	dep = dwc->eps[0];
+	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc);
+	if (ret) {
+		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
+		goto err0;
+	}
+
+	dep = dwc->eps[1];
+	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc);
+	if (ret) {
+		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
+		goto err1;
+	}
+
+	/* begin to receive SETUP packets */
+	dwc->ep0state = EP0_SETUP_PHASE;
+	dwc3_ep0_out_start(dwc);
+
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return 0;
+
+err1:
+	__dwc3_gadget_ep_disable(dwc->eps[0]);
+
+err0:
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return ret;
+}
+
+static int dwc3_gadget_stop(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+	unsigned long		flags;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+
+	__dwc3_gadget_ep_disable(dwc->eps[0]);
+	__dwc3_gadget_ep_disable(dwc->eps[1]);
+
+	dwc->gadget_driver	= NULL;
+	dwc->gadget.dev.driver	= NULL;
+
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return 0;
+}
+static const struct usb_gadget_ops dwc3_gadget_ops = {
+	.get_frame		= dwc3_gadget_get_frame,
+	.wakeup			= dwc3_gadget_wakeup,
+	.set_selfpowered	= dwc3_gadget_set_selfpowered,
+	.pullup			= dwc3_gadget_pullup,
+	.udc_start		= dwc3_gadget_start,
+	.udc_stop		= dwc3_gadget_stop,
+};
+
+/* -------------------------------------------------------------------------- */
+
+static int __devinit dwc3_gadget_init_endpoints(struct dwc3 *dwc)
+{
+	struct dwc3_ep			*dep;
+	u8				epnum;
+
+	INIT_LIST_HEAD(&dwc->gadget.ep_list);
+
+	for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
+		dep = kzalloc(sizeof(*dep), GFP_KERNEL);
+		if (!dep) {
+			dev_err(dwc->dev, "can't allocate endpoint %d\n",
+					epnum);
+			return -ENOMEM;
+		}
+
+		dep->dwc = dwc;
+		dep->number = epnum;
+		dwc->eps[epnum] = dep;
+
+		snprintf(dep->name, sizeof(dep->name), "ep%d%s", epnum >> 1,
+				(epnum & 1) ? "in" : "out");
+		dep->endpoint.name = dep->name;
+		dep->direction = (epnum & 1);
+
+		if (epnum == 0 || epnum == 1) {
+			dep->endpoint.maxpacket = 512;
+			dep->endpoint.ops = &dwc3_gadget_ep0_ops;
+			if (!epnum)
+				dwc->gadget.ep0 = &dep->endpoint;
+		} else {
+			int		ret;
+
+			dep->endpoint.maxpacket = 1024;
+			dep->endpoint.ops = &dwc3_gadget_ep_ops;
+			list_add_tail(&dep->endpoint.ep_list,
+					&dwc->gadget.ep_list);
+
+			ret = dwc3_alloc_trb_pool(dep);
+			if (ret) {
+				dev_err(dwc->dev, "%s: failed to allocate TRB pool\n", dep->name);
+				return ret;
+			}
+		}
+		INIT_LIST_HEAD(&dep->request_list);
+		INIT_LIST_HEAD(&dep->req_queued);
+	}
+
+	return 0;
+}
+
+static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
+{
+	struct dwc3_ep			*dep;
+	u8				epnum;
+
+	for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
+		dep = dwc->eps[epnum];
+		dwc3_free_trb_pool(dep);
+
+		if (epnum != 0 && epnum != 1)
+			list_del(&dep->endpoint.ep_list);
+
+		kfree(dep);
+	}
+}
+
+static void dwc3_gadget_release(struct device *dev)
+{
+	dev_dbg(dev, "%s\n", __func__);
+}
+
+/* -------------------------------------------------------------------------- */
+static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
+		const struct dwc3_event_depevt *event, int status)
+{
+	struct dwc3_request	*req;
+	struct dwc3_trb         trb;
+	unsigned int		count;
+	unsigned int		s_pkt = 0;
+
+	do {
+		req = next_request(&dep->req_queued);
+		if (!req)
+			break;
+
+		dwc3_trb_to_nat(req->trb, &trb);
+
+		if (trb.hwo && status != -ESHUTDOWN)
+			/*
+			 * We continue despite the error. There is not much we
+			 * can do. If we don't clean in up we loop for ever. If
+			 * we skip the TRB than it gets overwritten reused after
+			 * a while since we use them in a ring buffer. a BUG()
+			 * would help. Lets hope that if this occures, someone
+			 * fixes the root cause instead of looking away :)
+			 */
+			dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n",
+					dep->name, req->trb);
+		count = trb.length;
+
+		if (dep->direction) {
+			if (count) {
+				dev_err(dwc->dev, "incomplete IN transfer %s\n",
+						dep->name);
+				status = -ECONNRESET;
+			}
+		} else {
+			if (count && (event->status & DEPEVT_STATUS_SHORT))
+				s_pkt = 1;
+		}
+
+		/*
+		 * We assume here we will always receive the entire data block
+		 * which we should receive. Meaning, if we program RX to
+		 * receive 4K but we receive only 2K, we assume that's all we
+		 * should receive and we simply bounce the request back to the
+		 * gadget driver for further processing.
+		 */
+		req->request.actual += req->request.length - count;
+		dwc3_gadget_giveback(dep, req, status);
+		if (s_pkt)
+			break;
+		if ((event->status & DEPEVT_STATUS_LST) && trb.lst)
+			break;
+		if ((event->status & DEPEVT_STATUS_IOC) && trb.ioc)
+			break;
+	} while (1);
+
+	if ((event->status & DEPEVT_STATUS_IOC) && trb.ioc)
+		return 0;
+	return 1;
+}
+
+static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc,
+		struct dwc3_ep *dep, const struct dwc3_event_depevt *event,
+		int start_new)
+{
+	unsigned		status = 0;
+	int			clean_busy;
+
+	if (event->status & DEPEVT_STATUS_BUSERR)
+		status = -ECONNRESET;
+
+	clean_busy =  dwc3_cleanup_done_reqs(dwc, dep, event, status);
+	if (clean_busy) {
+		dep->flags &= ~DWC3_EP_BUSY;
+		dep->res_trans_idx = 0;
+	}
+}
+
+static void dwc3_gadget_start_isoc(struct dwc3 *dwc,
+		struct dwc3_ep *dep, const struct dwc3_event_depevt *event)
+{
+	u32 uf;
+
+	if (list_empty(&dep->request_list)) {
+		dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n",
+			dep->name);
+		return;
+	}
+
+	if (event->parameters) {
+		u32 mask;
+
+		mask = ~(dep->interval - 1);
+		uf = event->parameters & mask;
+		/* 4 micro frames in the future */
+		uf += dep->interval * 4;
+	} else {
+		uf = 0;
+	}
+
+	__dwc3_gadget_kick_transfer(dep, uf, 1);
+}
+
+static void dwc3_process_ep_cmd_complete(struct dwc3_ep *dep,
+		const struct dwc3_event_depevt *event)
+{
+	struct dwc3 *dwc = dep->dwc;
+	struct dwc3_event_depevt mod_ev = *event;
+
+	/*
+	 * We were asked to remove one requests. It is possible that this
+	 * request and a few other were started together and have the same
+	 * transfer index. Since we stopped the complete endpoint we don't
+	 * know how many requests were already completed (and not yet)
+	 * reported and how could be done (later). We purge them all until
+	 * the end of the list.
+	 */
+	mod_ev.status = DEPEVT_STATUS_LST;
+	dwc3_cleanup_done_reqs(dwc, dep, &mod_ev, -ESHUTDOWN);
+	dep->flags &= ~DWC3_EP_BUSY;
+	/* pending requets are ignored and are queued on XferNotReady */
+}
+
+static void dwc3_ep_cmd_compl(struct dwc3_ep *dep,
+		const struct dwc3_event_depevt *event)
+{
+	u32 param = event->parameters;
+	u32 cmd_type = (param >> 8) & ((1 << 5) - 1);
+
+	switch (cmd_type) {
+	case DWC3_DEPCMD_ENDTRANSFER:
+		dwc3_process_ep_cmd_complete(dep, event);
+		break;
+	case DWC3_DEPCMD_STARTTRANSFER:
+		dep->res_trans_idx = param & 0x7f;
+		break;
+	default:
+		printk(KERN_ERR "%s() unknown /unexpected type: %d\n",
+				__func__, cmd_type);
+		break;
+	};
+}
+
+static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
+		const struct dwc3_event_depevt *event)
+{
+	struct dwc3_ep		*dep;
+	u8			epnum = event->endpoint_number;
+
+	dep = dwc->eps[epnum];
+
+	dev_vdbg(dwc->dev, "%s: %s\n", dep->name,
+			dwc3_ep_event_string(event->endpoint_event));
+
+	if (epnum == 0 || epnum == 1) {
+		dwc3_ep0_interrupt(dwc, event);
+		return;
+	}
+
+	switch (event->endpoint_event) {
+	case DWC3_DEPEVT_XFERCOMPLETE:
+		if (usb_endpoint_xfer_isoc(dep->desc)) {
+			dev_dbg(dwc->dev, "%s is an Isochronous endpoint\n",
+					dep->name);
+			return;
+		}
+
+		dwc3_endpoint_transfer_complete(dwc, dep, event, 1);
+		break;
+	case DWC3_DEPEVT_XFERINPROGRESS:
+		if (!usb_endpoint_xfer_isoc(dep->desc)) {
+			dev_dbg(dwc->dev, "%s is not an Isochronous endpoint\n",
+					dep->name);
+			return;
+		}
+
+		dwc3_endpoint_transfer_complete(dwc, dep, event, 0);
+		break;
+	case DWC3_DEPEVT_XFERNOTREADY:
+		if (usb_endpoint_xfer_isoc(dep->desc)) {
+			dwc3_gadget_start_isoc(dwc, dep, event);
+		} else {
+			int ret;
+
+			dev_vdbg(dwc->dev, "%s: reason %s\n",
+					dep->name, event->status
+					? "Transfer Active"
+					: "Transfer Not Active");
+
+			ret = __dwc3_gadget_kick_transfer(dep, 0, 1);
+			if (!ret || ret == -EBUSY)
+				return;
+
+			dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
+					dep->name);
+		}
+
+		break;
+	case DWC3_DEPEVT_STREAMEVT:
+		if (!usb_endpoint_xfer_bulk(dep->desc)) {
+			dev_err(dwc->dev, "Stream event for non-Bulk %s\n",
+					dep->name);
+			return;
+		}
+
+		switch (event->status) {
+		case DEPEVT_STREAMEVT_FOUND:
+			dev_vdbg(dwc->dev, "Stream %d found and started\n",
+					event->parameters);
+
+			break;
+		case DEPEVT_STREAMEVT_NOTFOUND:
+			/* FALLTHROUGH */
+		default:
+			dev_dbg(dwc->dev, "Couldn't find suitable stream\n");
+		}
+		break;
+	case DWC3_DEPEVT_RXTXFIFOEVT:
+		dev_dbg(dwc->dev, "%s FIFO Overrun\n", dep->name);
+		break;
+	case DWC3_DEPEVT_EPCMDCMPLT:
+		dwc3_ep_cmd_compl(dep, event);
+		break;
+	}
+}
+
+static void dwc3_disconnect_gadget(struct dwc3 *dwc)
+{
+	if (dwc->gadget_driver && dwc->gadget_driver->disconnect) {
+		spin_unlock(&dwc->lock);
+		dwc->gadget_driver->disconnect(&dwc->gadget);
+		spin_lock(&dwc->lock);
+	}
+}
+
+static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum)
+{
+	struct dwc3_ep *dep;
+	struct dwc3_gadget_ep_cmd_params params;
+	u32 cmd;
+	int ret;
+
+	dep = dwc->eps[epnum];
+
+	WARN_ON(!dep->res_trans_idx);
+	if (dep->res_trans_idx) {
+		cmd = DWC3_DEPCMD_ENDTRANSFER;
+		cmd |= DWC3_DEPCMD_HIPRI_FORCERM | DWC3_DEPCMD_CMDIOC;
+		cmd |= DWC3_DEPCMD_PARAM(dep->res_trans_idx);
+		memset(&params, 0, sizeof(params));
+		ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
+		WARN_ON_ONCE(ret);
+		dep->res_trans_idx = 0;
+	}
+}
+
+static void dwc3_stop_active_transfers(struct dwc3 *dwc)
+{
+	u32 epnum;
+
+	for (epnum = 2; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
+		struct dwc3_ep *dep;
+
+		dep = dwc->eps[epnum];
+		if (!(dep->flags & DWC3_EP_ENABLED))
+			continue;
+
+		dwc3_remove_requests(dwc, dep);
+	}
+}
+
+static void dwc3_clear_stall_all_ep(struct dwc3 *dwc)
+{
+	u32 epnum;
+
+	for (epnum = 1; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
+		struct dwc3_ep *dep;
+		struct dwc3_gadget_ep_cmd_params params;
+		int ret;
+
+		dep = dwc->eps[epnum];
+
+		if (!(dep->flags & DWC3_EP_STALL))
+			continue;
+
+		dep->flags &= ~DWC3_EP_STALL;
+
+		memset(&params, 0, sizeof(params));
+		ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
+				DWC3_DEPCMD_CLEARSTALL, &params);
+		WARN_ON_ONCE(ret);
+	}
+}
+
+static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
+{
+	dev_vdbg(dwc->dev, "%s\n", __func__);
+#if 0
+	XXX
+	U1/U2 is powersave optimization. Skip it for now. Anyway we need to
+	enable it before we can disable it.
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+	reg &= ~DWC3_DCTL_INITU1ENA;
+	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
+	reg &= ~DWC3_DCTL_INITU2ENA;
+	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+#endif
+
+	dwc3_stop_active_transfers(dwc);
+	dwc3_disconnect_gadget(dwc);
+	dwc->start_config_issued = false;
+
+	dwc->gadget.speed = USB_SPEED_UNKNOWN;
+}
+
+static void dwc3_gadget_usb3_phy_power(struct dwc3 *dwc, int on)
+{
+	u32			reg;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
+
+	if (on)
+		reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
+	else
+		reg |= DWC3_GUSB3PIPECTL_SUSPHY;
+
+	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+}
+
+static void dwc3_gadget_usb2_phy_power(struct dwc3 *dwc, int on)
+{
+	u32			reg;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+
+	if (on)
+		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+	else
+		reg |= DWC3_GUSB2PHYCFG_SUSPHY;
+
+	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+}
+
+static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
+{
+	u32			reg;
+
+	dev_vdbg(dwc->dev, "%s\n", __func__);
+
+	/* Enable PHYs */
+	dwc3_gadget_usb2_phy_power(dwc, true);
+	dwc3_gadget_usb3_phy_power(dwc, true);
+
+	if (dwc->gadget.speed != USB_SPEED_UNKNOWN)
+		dwc3_disconnect_gadget(dwc);
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+	reg &= ~DWC3_DCTL_TSTCTRL_MASK;
+	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
+	dwc3_stop_active_transfers(dwc);
+	dwc3_clear_stall_all_ep(dwc);
+	dwc->start_config_issued = false;
+
+	/* Reset device address to zero */
+	reg = dwc3_readl(dwc->regs, DWC3_DCFG);
+	reg &= ~(DWC3_DCFG_DEVADDR_MASK);
+	dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+}
+
+static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed)
+{
+	u32 reg;
+	u32 usb30_clock = DWC3_GCTL_CLK_BUS;
+
+	/*
+	 * We change the clock only at SS but I dunno why I would want to do
+	 * this. Maybe it becomes part of the power saving plan.
+	 */
+
+	if (speed != DWC3_DSTS_SUPERSPEED)
+		return;
+
+	/*
+	 * RAMClkSel is reset to 0 after USB reset, so it must be reprogrammed
+	 * each time on Connect Done.
+	 */
+	if (!usb30_clock)
+		return;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
+	reg |= DWC3_GCTL_RAMCLKSEL(usb30_clock);
+	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+}
+
+static void dwc3_gadget_disable_phy(struct dwc3 *dwc, u8 speed)
+{
+	switch (speed) {
+	case USB_SPEED_SUPER:
+		dwc3_gadget_usb2_phy_power(dwc, false);
+		break;
+	case USB_SPEED_HIGH:
+	case USB_SPEED_FULL:
+	case USB_SPEED_LOW:
+		dwc3_gadget_usb3_phy_power(dwc, false);
+		break;
+	}
+}
+
+static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
+{
+	struct dwc3_gadget_ep_cmd_params params;
+	struct dwc3_ep		*dep;
+	int			ret;
+	u32			reg;
+	u8			speed;
+
+	dev_vdbg(dwc->dev, "%s\n", __func__);
+
+	memset(&params, 0x00, sizeof(params));
+
+	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+	speed = reg & DWC3_DSTS_CONNECTSPD;
+	dwc->speed = speed;
+
+	dwc3_update_ram_clk_sel(dwc, speed);
+
+	switch (speed) {
+	case DWC3_DCFG_SUPERSPEED:
+		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
+		dwc->gadget.ep0->maxpacket = 512;
+		dwc->gadget.speed = USB_SPEED_SUPER;
+		break;
+	case DWC3_DCFG_HIGHSPEED:
+		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
+		dwc->gadget.ep0->maxpacket = 64;
+		dwc->gadget.speed = USB_SPEED_HIGH;
+		break;
+	case DWC3_DCFG_FULLSPEED2:
+	case DWC3_DCFG_FULLSPEED1:
+		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
+		dwc->gadget.ep0->maxpacket = 64;
+		dwc->gadget.speed = USB_SPEED_FULL;
+		break;
+	case DWC3_DCFG_LOWSPEED:
+		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8);
+		dwc->gadget.ep0->maxpacket = 8;
+		dwc->gadget.speed = USB_SPEED_LOW;
+		break;
+	}
+
+	/* Disable unneded PHY */
+	dwc3_gadget_disable_phy(dwc, dwc->gadget.speed);
+
+	dep = dwc->eps[0];
+	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc);
+	if (ret) {
+		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
+		return;
+	}
+
+	dep = dwc->eps[1];
+	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc);
+	if (ret) {
+		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
+		return;
+	}
+
+	/*
+	 * Configure PHY via GUSB3PIPECTLn if required.
+	 *
+	 * Update GTXFIFOSIZn
+	 *
+	 * In both cases reset values should be sufficient.
+	 */
+}
+
+static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc)
+{
+	dev_vdbg(dwc->dev, "%s\n", __func__);
+
+	/*
+	 * TODO take core out of low power mode when that's
+	 * implemented.
+	 */
+
+	dwc->gadget_driver->resume(&dwc->gadget);
+}
+
+static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
+		unsigned int evtinfo)
+{
+	/*  The fith bit says SuperSpeed yes or no. */
+	dwc->link_state = evtinfo & DWC3_LINK_STATE_MASK;
+
+	dev_vdbg(dwc->dev, "%s link %d\n", __func__, dwc->link_state);
+}
+
+static void dwc3_gadget_interrupt(struct dwc3 *dwc,
+		const struct dwc3_event_devt *event)
+{
+	switch (event->type) {
+	case DWC3_DEVICE_EVENT_DISCONNECT:
+		dwc3_gadget_disconnect_interrupt(dwc);
+		break;
+	case DWC3_DEVICE_EVENT_RESET:
+		dwc3_gadget_reset_interrupt(dwc);
+		break;
+	case DWC3_DEVICE_EVENT_CONNECT_DONE:
+		dwc3_gadget_conndone_interrupt(dwc);
+		break;
+	case DWC3_DEVICE_EVENT_WAKEUP:
+		dwc3_gadget_wakeup_interrupt(dwc);
+		break;
+	case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
+		dwc3_gadget_linksts_change_interrupt(dwc, event->event_info);
+		break;
+	case DWC3_DEVICE_EVENT_EOPF:
+		dev_vdbg(dwc->dev, "End of Periodic Frame\n");
+		break;
+	case DWC3_DEVICE_EVENT_SOF:
+		dev_vdbg(dwc->dev, "Start of Periodic Frame\n");
+		break;
+	case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
+		dev_vdbg(dwc->dev, "Erratic Error\n");
+		break;
+	case DWC3_DEVICE_EVENT_CMD_CMPL:
+		dev_vdbg(dwc->dev, "Command Complete\n");
+		break;
+	case DWC3_DEVICE_EVENT_OVERFLOW:
+		dev_vdbg(dwc->dev, "Overflow\n");
+		break;
+	default:
+		dev_dbg(dwc->dev, "UNKNOWN IRQ %d\n", event->type);
+	}
+}
+
+static void dwc3_process_event_entry(struct dwc3 *dwc,
+		const union dwc3_event *event)
+{
+	/* Endpoint IRQ, handle it and return early */
+	if (event->type.is_devspec == 0) {
+		/* depevt */
+		return dwc3_endpoint_interrupt(dwc, &event->depevt);
+	}
+
+	switch (event->type.type) {
+	case DWC3_EVENT_TYPE_DEV:
+		dwc3_gadget_interrupt(dwc, &event->devt);
+		break;
+	/* REVISIT what to do with Carkit and I2C events ? */
+	default:
+		dev_err(dwc->dev, "UNKNOWN IRQ type %d\n", event->raw);
+	}
+}
+
+static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf)
+{
+	struct dwc3_event_buffer *evt;
+	int left;
+	u32 count;
+
+	count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(buf));
+	count &= DWC3_GEVNTCOUNT_MASK;
+	if (!count)
+		return IRQ_NONE;
+
+	evt = dwc->ev_buffs[buf];
+	left = count;
+
+	while (left > 0) {
+		union dwc3_event event;
+
+		memcpy(&event.raw, (evt->buf + evt->lpos), sizeof(event.raw));
+		dwc3_process_event_entry(dwc, &event);
+		/*
+		 * XXX we wrap around correctly to the next entry as almost all
+		 * entries are 4 bytes in size. There is one entry which has 12
+		 * bytes which is a regular entry followed by 8 bytes data. ATM
+		 * I don't know how things are organized if were get next to the
+		 * a boundary so I worry about that once we try to handle that.
+		 */
+		evt->lpos = (evt->lpos + 4) % DWC3_EVENT_BUFFERS_SIZE;
+		left -= 4;
+
+		dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(buf), 4);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
+{
+	struct dwc3			*dwc = _dwc;
+	int				i;
+	irqreturn_t			ret = IRQ_NONE;
+
+	spin_lock(&dwc->lock);
+
+	for (i = 0; i < DWC3_EVENT_BUFFERS_NUM; i++) {
+		irqreturn_t status;
+
+		status = dwc3_process_event_buf(dwc, i);
+		if (status == IRQ_HANDLED)
+			ret = status;
+	}
+
+	spin_unlock(&dwc->lock);
+
+	return ret;
+}
+
+/**
+ * dwc3_gadget_init - Initializes gadget related registers
+ * @dwc: Pointer to out controller context structure
+ *
+ * Returns 0 on success otherwise negative errno.
+ */
+int __devinit dwc3_gadget_init(struct dwc3 *dwc)
+{
+	u32					reg;
+	int					ret;
+	int					irq;
+
+	dwc->ctrl_req = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
+			&dwc->ctrl_req_addr, GFP_KERNEL);
+	if (!dwc->ctrl_req) {
+		dev_err(dwc->dev, "failed to allocate ctrl request\n");
+		ret = -ENOMEM;
+		goto err0;
+	}
+
+	dwc->ep0_trb = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
+			&dwc->ep0_trb_addr, GFP_KERNEL);
+	if (!dwc->ep0_trb) {
+		dev_err(dwc->dev, "failed to allocate ep0 trb\n");
+		ret = -ENOMEM;
+		goto err1;
+	}
+
+	dwc->setup_buf = dma_alloc_coherent(dwc->dev,
+			sizeof(*dwc->setup_buf) * 2,
+			&dwc->setup_buf_addr, GFP_KERNEL);
+	if (!dwc->setup_buf) {
+		dev_err(dwc->dev, "failed to allocate setup buffer\n");
+		ret = -ENOMEM;
+		goto err2;
+	}
+
+	dwc->ep0_bounce = dma_alloc_coherent(dwc->dev,
+			512, &dwc->ep0_bounce_addr, GFP_KERNEL);
+	if (!dwc->ep0_bounce) {
+		dev_err(dwc->dev, "failed to allocate ep0 bounce buffer\n");
+		ret = -ENOMEM;
+		goto err3;
+	}
+
+	dev_set_name(&dwc->gadget.dev, "gadget");
+
+	dwc->gadget.ops			= &dwc3_gadget_ops;
+	dwc->gadget.is_dualspeed	= true;
+	dwc->gadget.speed		= USB_SPEED_UNKNOWN;
+	dwc->gadget.dev.parent		= dwc->dev;
+
+	dma_set_coherent_mask(&dwc->gadget.dev, dwc->dev->coherent_dma_mask);
+
+	dwc->gadget.dev.dma_parms	= dwc->dev->dma_parms;
+	dwc->gadget.dev.dma_mask	= dwc->dev->dma_mask;
+	dwc->gadget.dev.release		= dwc3_gadget_release;
+	dwc->gadget.name		= "dwc3-gadget";
+
+	/*
+	 * REVISIT: Here we should clear all pending IRQs to be
+	 * sure we're starting from a well known location.
+	 */
+
+	ret = dwc3_gadget_init_endpoints(dwc);
+	if (ret)
+		goto err4;
+
+	irq = platform_get_irq(to_platform_device(dwc->dev), 0);
+
+	ret = request_irq(irq, dwc3_interrupt, IRQF_SHARED,
+			"dwc3", dwc);
+	if (ret) {
+		dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
+				irq, ret);
+		goto err5;
+	}
+
+	/* Enable all but Start and End of Frame IRQs */
+	reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN |
+			DWC3_DEVTEN_EVNTOVERFLOWEN |
+			DWC3_DEVTEN_CMDCMPLTEN |
+			DWC3_DEVTEN_ERRTICERREN |
+			DWC3_DEVTEN_WKUPEVTEN |
+			DWC3_DEVTEN_ULSTCNGEN |
+			DWC3_DEVTEN_CONNECTDONEEN |
+			DWC3_DEVTEN_USBRSTEN |
+			DWC3_DEVTEN_DISCONNEVTEN);
+	dwc3_writel(dwc->regs, DWC3_DEVTEN, reg);
+
+	ret = device_register(&dwc->gadget.dev);
+	if (ret) {
+		dev_err(dwc->dev, "failed to register gadget device\n");
+		put_device(&dwc->gadget.dev);
+		goto err6;
+	}
+
+	ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget);
+	if (ret) {
+		dev_err(dwc->dev, "failed to register udc\n");
+		goto err7;
+	}
+
+	return 0;
+
+err7:
+	device_unregister(&dwc->gadget.dev);
+
+err6:
+	dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00);
+	free_irq(irq, dwc);
+
+err5:
+	dwc3_gadget_free_endpoints(dwc);
+
+err4:
+	dma_free_coherent(dwc->dev, 512, dwc->ep0_bounce,
+			dwc->ep0_bounce_addr);
+
+err3:
+	dma_free_coherent(dwc->dev, sizeof(*dwc->setup_buf) * 2,
+			dwc->setup_buf, dwc->setup_buf_addr);
+
+err2:
+	dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
+			dwc->ep0_trb, dwc->ep0_trb_addr);
+
+err1:
+	dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
+			dwc->ctrl_req, dwc->ctrl_req_addr);
+
+err0:
+	return ret;
+}
+
+void dwc3_gadget_exit(struct dwc3 *dwc)
+{
+	int			irq;
+	int			i;
+
+	usb_del_gadget_udc(&dwc->gadget);
+	irq = platform_get_irq(to_platform_device(dwc->dev), 0);
+
+	dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00);
+	free_irq(irq, dwc);
+
+	for (i = 0; i < ARRAY_SIZE(dwc->eps); i++)
+		__dwc3_gadget_ep_disable(dwc->eps[i]);
+
+	dwc3_gadget_free_endpoints(dwc);
+
+	dma_free_coherent(dwc->dev, 512, dwc->ep0_bounce,
+			dwc->ep0_bounce_addr);
+
+	dma_free_coherent(dwc->dev, sizeof(*dwc->setup_buf) * 2,
+			dwc->setup_buf, dwc->setup_buf_addr);
+
+	dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
+			dwc->ep0_trb, dwc->ep0_trb_addr);
+
+	dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
+			dwc->ctrl_req, dwc->ctrl_req_addr);
+
+	device_unregister(&dwc->gadget.dev);
+}
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
new file mode 100644
index 0000000..71145a4
--- /dev/null
+++ b/drivers/usb/dwc3/gadget.h
@@ -0,0 +1,211 @@
+/**
+ * gadget.h - DesignWare USB3 DRD Gadget Header
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __DRIVERS_USB_DWC3_GADGET_H
+#define __DRIVERS_USB_DWC3_GADGET_H
+
+#include <linux/list.h>
+#include <linux/usb/gadget.h>
+#include "io.h"
+
+struct dwc3;
+#define to_dwc3_ep(ep)		(container_of(ep, struct dwc3_ep, endpoint))
+#define gadget_to_dwc(g)	(container_of(g, struct dwc3, gadget))
+
+/* DEPCFG parameter 1 */
+#define DWC3_DEPCFG_INT_NUM(n)		((n) << 0)
+#define DWC3_DEPCFG_XFER_COMPLETE_EN	(1 << 8)
+#define DWC3_DEPCFG_XFER_IN_PROGRESS_EN	(1 << 9)
+#define DWC3_DEPCFG_XFER_NOT_READY_EN	(1 << 10)
+#define DWC3_DEPCFG_FIFO_ERROR_EN	(1 << 11)
+#define DWC3_DEPCFG_STREAM_EVENT_EN	(1 << 13)
+#define DWC3_DEPCFG_BINTERVAL_M1(n)	((n) << 16)
+#define DWC3_DEPCFG_STREAM_CAPABLE	(1 << 24)
+#define DWC3_DEPCFG_EP_NUMBER(n)	((n) << 25)
+#define DWC3_DEPCFG_BULK_BASED		(1 << 30)
+#define DWC3_DEPCFG_FIFO_BASED		(1 << 31)
+
+/* DEPCFG parameter 0 */
+#define DWC3_DEPCFG_EP_TYPE(n)		((n) << 1)
+#define DWC3_DEPCFG_MAX_PACKET_SIZE(n)	((n) << 3)
+#define DWC3_DEPCFG_FIFO_NUMBER(n)	((n) << 17)
+#define DWC3_DEPCFG_BURST_SIZE(n)	((n) << 22)
+#define DWC3_DEPCFG_DATA_SEQ_NUM(n)	((n) << 26)
+#define DWC3_DEPCFG_IGN_SEQ_NUM		(1 << 31)
+
+/* DEPXFERCFG parameter 0 */
+#define DWC3_DEPXFERCFG_NUM_XFER_RES(n)	((n) & 0xffff)
+
+struct dwc3_gadget_ep_cmd_params {
+	u32	param2;
+	u32	param1;
+	u32	param0;
+};
+
+/* -------------------------------------------------------------------------- */
+
+struct dwc3_request {
+	struct usb_request	request;
+	struct list_head	list;
+	struct dwc3_ep		*dep;
+
+	u8			epnum;
+	struct dwc3_trb_hw	*trb;
+	dma_addr_t		trb_dma;
+
+	unsigned		direction:1;
+	unsigned		mapped:1;
+	unsigned		queued:1;
+};
+#define to_dwc3_request(r)	(container_of(r, struct dwc3_request, request))
+
+static inline struct dwc3_request *next_request(struct list_head *list)
+{
+	if (list_empty(list))
+		return NULL;
+
+	return list_first_entry(list, struct dwc3_request, list);
+}
+
+static inline void dwc3_gadget_move_request_queued(struct dwc3_request *req)
+{
+	struct dwc3_ep		*dep = req->dep;
+
+	req->queued = true;
+	list_move_tail(&req->list, &dep->req_queued);
+}
+
+#if defined(CONFIG_USB_GADGET_DWC3) || defined(CONFIG_USB_GADGET_DWC3_MODULE)
+int dwc3_gadget_init(struct dwc3 *dwc);
+void dwc3_gadget_exit(struct dwc3 *dwc);
+#else
+static inline int dwc3_gadget_init(struct dwc3 *dwc) { return 0; }
+static inline void dwc3_gadget_exit(struct dwc3 *dwc) { }
+static inline int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
+		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
+{
+	return 0;
+}
+#endif
+
+void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
+		int status);
+
+void dwc3_ep0_interrupt(struct dwc3 *dwc, const struct dwc3_event_depevt *event);
+void dwc3_ep0_out_start(struct dwc3 *dwc);
+int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
+		gfp_t gfp_flags);
+int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value);
+int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
+		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params);
+void dwc3_map_buffer_to_dma(struct dwc3_request *req);
+void dwc3_unmap_buffer_from_dma(struct dwc3_request *req);
+
+/**
+ * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW
+ * @dwc: DesignWare USB3 Pointer
+ * @number: DWC endpoint number
+ *
+ * Caller should take care of locking
+ */
+static inline u32 dwc3_gadget_ep_get_transfer_index(struct dwc3 *dwc, u8 number)
+{
+	u32			res_id;
+
+	res_id = dwc3_readl(dwc->regs, DWC3_DEPCMD(number));
+
+	return DWC3_DEPCMD_GET_RSC_IDX(res_id);
+}
+
+/**
+ * dwc3_gadget_event_string - returns event name
+ * @event: the event code
+ */
+static inline const char *dwc3_gadget_event_string(u8 event)
+{
+	switch (event) {
+	case DWC3_DEVICE_EVENT_DISCONNECT:
+		return "Disconnect";
+	case DWC3_DEVICE_EVENT_RESET:
+		return "Reset";
+	case DWC3_DEVICE_EVENT_CONNECT_DONE:
+		return "Connection Done";
+	case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
+		return "Link Status Change";
+	case DWC3_DEVICE_EVENT_WAKEUP:
+		return "WakeUp";
+	case DWC3_DEVICE_EVENT_EOPF:
+		return "End-Of-Frame";
+	case DWC3_DEVICE_EVENT_SOF:
+		return "Start-Of-Frame";
+	case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
+		return "Erratic Error";
+	case DWC3_DEVICE_EVENT_CMD_CMPL:
+		return "Command Complete";
+	case DWC3_DEVICE_EVENT_OVERFLOW:
+		return "Overflow";
+	}
+
+	return "UNKNOWN";
+}
+
+/**
+ * dwc3_ep_event_string - returns event name
+ * @event: then event code
+ */
+static inline const char *dwc3_ep_event_string(u8 event)
+{
+	switch (event) {
+	case DWC3_DEPEVT_XFERCOMPLETE:
+		return "Transfer Complete";
+	case DWC3_DEPEVT_XFERINPROGRESS:
+		return "Transfer In-Progress";
+	case DWC3_DEPEVT_XFERNOTREADY:
+		return "Transfer Not Ready";
+	case DWC3_DEPEVT_RXTXFIFOEVT:
+		return "FIFO";
+	case DWC3_DEPEVT_STREAMEVT:
+		return "Stream";
+	case DWC3_DEPEVT_EPCMDCMPLT:
+		return "Endpoint Command Complete";
+	}
+
+	return "UNKNOWN";
+}
+
+#endif /* __DRIVERS_USB_DWC3_GADGET_H */
diff --git a/drivers/usb/dwc3/io.h b/drivers/usb/dwc3/io.h
new file mode 100644
index 0000000..bc957db
--- /dev/null
+++ b/drivers/usb/dwc3/io.h
@@ -0,0 +1,54 @@
+/**
+ * io.h - DesignWare USB3 DRD IO Header
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ *    to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2, as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __DRIVERS_USB_DWC3_IO_H
+#define __DRIVERS_USB_DWC3_IO_H
+
+#include <asm/io.h>
+
+static inline u32 dwc3_readl(void __iomem *base, u32 offset)
+{
+	return readl(base + offset);
+}
+
+static inline void dwc3_writel(void __iomem *base, u32 offset, u32 value)
+{
+	writel(value, base + offset);
+}
+
+#endif /* __DRIVERS_USB_DWC3_IO_H */
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 5a084b9..b21cd37 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -96,6 +96,22 @@ config USB_GADGET_VBUS_DRAW
 	   This value will be used except for system-specific gadget
 	   drivers that have more specific information.
 
+config USB_GADGET_STORAGE_NUM_BUFFERS
+	int "Number of storage pipeline buffers"
+	range 2 4
+	default 2
+	help
+	   Usually 2 buffers are enough to establish a good buffering
+	   pipeline. The number may be increased in order to compensate
+	   for a bursty VFS behaviour. For instance there may be CPU wake up
+	   latencies that makes the VFS to appear bursty in a system with
+	   an CPU on-demand governor. Especially if DMA is doing IO to
+	   offload the CPU. In this case the CPU will go into power
+	   save often and spin up occasionally to move data within VFS.
+	   If selecting USB_GADGET_DEBUG_FILES this value may be set by
+	   a module parameter as well.
+	   If unsure, say 2.
+
 #
 # USB Peripheral Controller Support
 #
@@ -255,12 +271,11 @@ config USB_S3C_HSOTG
 	  integrated into the S3C64XX series SoC.
 
 config USB_IMX
-	tristate "Freescale IMX USB Peripheral Controller"
-	depends on ARCH_MX1
+	tristate "Freescale i.MX1 USB Peripheral Controller"
+	depends on ARCH_MXC
 	help
-	   Freescale's IMX series include an integrated full speed
-	   USB 1.1 device controller.  The controller in the IMX series
-	   is register-compatible.
+	   Freescale's i.MX1 includes an integrated full speed
+	   USB 1.1 device controller.
 
 	   It has Six fixed-function endpoints, as well as endpoint
 	   zero (for control transfers).
@@ -303,6 +318,18 @@ config USB_PXA_U2O
 	  PXA9xx Processor series include a high speed USB2.0 device
 	  controller, which support high speed and full speed USB peripheral.
 
+config USB_GADGET_DWC3
+	tristate "DesignWare USB3.0 (DRD) Controller"
+	depends on USB_DWC3
+	select USB_GADGET_DUALSPEED
+	select USB_GADGET_SUPERSPEED
+	help
+	  DesignWare USB3.0 controller is a SuperSpeed USB3.0 Controller
+	  which can be configured for peripheral-only, host-only, hub-only
+	  and Dual-Role operation. This Controller was first integrated into
+	  the OMAP5 series of processors. More information about the OMAP5
+	  version of this controller, refer to http://www.ti.com/omap5.
+
 #
 # Controllers available in both integrated and discrete versions
 #
@@ -846,6 +873,16 @@ config USB_G_NOKIA
 	  It's only really useful for N900 hardware. If you're building
 	  a kernel for N900, say Y or M here. If unsure, say N.
 
+config USB_G_ACM_MS
+	tristate "CDC Composite Device (ACM and mass storage)"
+	depends on BLOCK
+	help
+	  This driver provides two functions in one configuration:
+	  a mass storage, and a CDC ACM (serial port) link.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "g_acm_ms".
+
 config USB_G_MULTI
 	tristate "Multifunction Composite Gadget (EXPERIMENTAL)"
 	depends on BLOCK && NET
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 9ba725a..b54ac61 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -28,7 +28,7 @@ obj-$(CONFIG_USB_S3C_HSUDC)	+= s3c-hsudc.o
 obj-$(CONFIG_USB_LANGWELL)	+= langwell_udc.o
 obj-$(CONFIG_USB_EG20T)		+= pch_udc.o
 obj-$(CONFIG_USB_PXA_U2O)	+= mv_udc.o
-mv_udc-y			:= mv_udc_core.o mv_udc_phy.o
+mv_udc-y			:= mv_udc_core.o
 obj-$(CONFIG_USB_CI13XXX_MSM)	+= ci13xxx_msm.o
 obj-$(CONFIG_USB_FUSB300)	+= fusb300_udc.o
 
@@ -51,6 +51,7 @@ g_dbgp-y			:= dbgp.o
 g_nokia-y			:= nokia.o
 g_webcam-y			:= webcam.o
 g_ncm-y				:= ncm.o
+g_acm_ms-y			:= acm_ms.o
 
 obj-$(CONFIG_USB_ZERO)		+= g_zero.o
 obj-$(CONFIG_USB_AUDIO)		+= g_audio.o
@@ -69,3 +70,4 @@ obj-$(CONFIG_USB_G_MULTI)	+= g_multi.o
 obj-$(CONFIG_USB_G_NOKIA)	+= g_nokia.o
 obj-$(CONFIG_USB_G_WEBCAM)	+= g_webcam.o
 obj-$(CONFIG_USB_G_NCM)		+= g_ncm.o
+obj-$(CONFIG_USB_G_ACM_MS)	+= g_acm_ms.o
diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c
new file mode 100644
index 0000000..fdb7aec
--- /dev/null
+++ b/drivers/usb/gadget/acm_ms.c
@@ -0,0 +1,256 @@
+/*
+ * acm_ms.c -- Composite driver, with ACM and mass storage support
+ *
+ * Copyright (C) 2008 David Brownell
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: David Brownell
+ * Modified: Klaus Schwarzkopf <schwarzkopf@sensortherm.de>
+ *
+ * Heavily based on multi.c and cdc2.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/utsname.h>
+
+#include "u_serial.h"
+
+#define DRIVER_DESC		"Composite Gadget (ACM + MS)"
+#define DRIVER_VERSION		"2011/10/10"
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
+ * Instead:  allocate your own, using normal USB-IF procedures.
+ */
+#define ACM_MS_VENDOR_NUM	0x1d6b	/* Linux Foundation */
+#define ACM_MS_PRODUCT_NUM	0x0106	/* Composite Gadget: ACM + MS*/
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Kbuild is not very cooperative with respect to linking separately
+ * compiled library objects into one module.  So for now we won't use
+ * separate compilation ... ensuring init/exit sections work to shrink
+ * the runtime footprint, and giving us at least some parts of what
+ * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
+ */
+
+#include "composite.c"
+#include "usbstring.c"
+#include "config.c"
+#include "epautoconf.c"
+#include "u_serial.c"
+#include "f_acm.c"
+#include "f_mass_storage.c"
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_device_descriptor device_desc = {
+	.bLength =		sizeof device_desc,
+	.bDescriptorType =	USB_DT_DEVICE,
+
+	.bcdUSB =		cpu_to_le16(0x0200),
+
+	.bDeviceClass =		USB_CLASS_MISC /* 0xEF */,
+	.bDeviceSubClass =	2,
+	.bDeviceProtocol =	1,
+
+	/* .bMaxPacketSize0 = f(hardware) */
+
+	/* Vendor and product id can be overridden by module parameters.  */
+	.idVendor =		cpu_to_le16(ACM_MS_VENDOR_NUM),
+	.idProduct =		cpu_to_le16(ACM_MS_PRODUCT_NUM),
+	/* .bcdDevice = f(hardware) */
+	/* .iManufacturer = DYNAMIC */
+	/* .iProduct = DYNAMIC */
+	/* NO SERIAL NUMBER */
+	/*.bNumConfigurations =	DYNAMIC*/
+};
+
+static struct usb_otg_descriptor otg_descriptor = {
+	.bLength =		sizeof otg_descriptor,
+	.bDescriptorType =	USB_DT_OTG,
+
+	/*
+	 * REVISIT SRP-only hardware is possible, although
+	 * it would not be called "OTG" ...
+	 */
+	.bmAttributes =		USB_OTG_SRP | USB_OTG_HNP,
+};
+
+static const struct usb_descriptor_header *otg_desc[] = {
+	(struct usb_descriptor_header *) &otg_descriptor,
+	NULL,
+};
+
+
+/* string IDs are assigned dynamically */
+
+#define STRING_MANUFACTURER_IDX		0
+#define STRING_PRODUCT_IDX		1
+
+static char manufacturer[50];
+
+static struct usb_string strings_dev[] = {
+	[STRING_MANUFACTURER_IDX].s = manufacturer,
+	[STRING_PRODUCT_IDX].s = DRIVER_DESC,
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= strings_dev,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
+
+/****************************** Configurations ******************************/
+
+static struct fsg_module_parameters fsg_mod_data = { .stall = 1 };
+FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data);
+
+static struct fsg_common fsg_common;
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * We _always_ have both ACM and mass storage functions.
+ */
+static int __init acm_ms_do_config(struct usb_configuration *c)
+{
+	int	status;
+
+	if (gadget_is_otg(c->cdev->gadget)) {
+		c->descriptors = otg_desc;
+		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+
+	status = acm_bind_config(c, 0);
+	if (status < 0)
+		return status;
+
+	status = fsg_bind_config(c->cdev, c, &fsg_common);
+	if (status < 0)
+		return status;
+
+	return 0;
+}
+
+static struct usb_configuration acm_ms_config_driver = {
+	.label			= DRIVER_DESC,
+	.bConfigurationValue	= 1,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init acm_ms_bind(struct usb_composite_dev *cdev)
+{
+	int			gcnum;
+	struct usb_gadget	*gadget = cdev->gadget;
+	int			status;
+	void			*retp;
+
+	/* set up serial link layer */
+	status = gserial_setup(cdev->gadget, 1);
+	if (status < 0)
+		return status;
+
+	/* set up mass storage function */
+	retp = fsg_common_from_params(&fsg_common, cdev, &fsg_mod_data);
+	if (IS_ERR(retp)) {
+		status = PTR_ERR(retp);
+		goto fail0;
+	}
+
+	/* set bcdDevice */
+	gcnum = usb_gadget_controller_number(gadget);
+	if (gcnum >= 0) {
+		device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
+	} else {
+		WARNING(cdev, "controller '%s' not recognized; trying %s\n",
+				gadget->name,
+				acm_ms_config_driver.label);
+		device_desc.bcdDevice =
+			cpu_to_le16(0x0300 | 0x0099);
+	}
+
+	/*
+	 * Allocate string descriptor numbers ... note that string
+	 * contents can be overridden by the composite_dev glue.
+	 */
+
+	/* device descriptor strings: manufacturer, product */
+	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
+		init_utsname()->sysname, init_utsname()->release,
+		gadget->name);
+	status = usb_string_id(cdev);
+	if (status < 0)
+		goto fail1;
+	strings_dev[STRING_MANUFACTURER_IDX].id = status;
+	device_desc.iManufacturer = status;
+
+	status = usb_string_id(cdev);
+	if (status < 0)
+		goto fail1;
+	strings_dev[STRING_PRODUCT_IDX].id = status;
+	device_desc.iProduct = status;
+
+	/* register our configuration */
+	status = usb_add_config(cdev, &acm_ms_config_driver, acm_ms_do_config);
+	if (status < 0)
+		goto fail1;
+
+	dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n",
+			DRIVER_DESC);
+	fsg_common_put(&fsg_common);
+	return 0;
+
+	/* error recovery */
+fail1:
+	fsg_common_put(&fsg_common);
+fail0:
+	gserial_cleanup();
+	return status;
+}
+
+static int __exit acm_ms_unbind(struct usb_composite_dev *cdev)
+{
+	gserial_cleanup();
+
+	return 0;
+}
+
+static struct usb_composite_driver acm_ms_driver = {
+	.name		= "g_acm_ms",
+	.dev		= &device_desc,
+	.strings	= dev_strings,
+	.unbind		= __exit_p(acm_ms_unbind),
+};
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Klaus Schwarzkopf <schwarzkopf@sensortherm.de>");
+MODULE_LICENSE("GPL v2");
+
+static int __init init(void)
+{
+	return usb_composite_probe(&acm_ms_driver, acm_ms_bind);
+}
+module_init(init);
+
+static void __exit cleanup(void)
+{
+	usb_composite_unregister(&acm_ms_driver);
+}
+module_exit(cleanup);
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 70f2b37..4730016 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -8,15 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 /*
@@ -354,7 +345,7 @@ udc_ep_enable(struct usb_ep *usbep, const struct usb_endpoint_descriptor *desc)
 	writel(tmp, &dev->ep[ep->num].regs->ctl);
 
 	/* set max packet size */
-	maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	maxpacket = usb_endpoint_maxp(desc);
 	tmp = readl(&dev->ep[ep->num].regs->bufout_maxpkt);
 	tmp = AMD_ADDBITS(tmp, maxpacket, UDC_EP_MAX_PKT_SIZE);
 	ep->ep.maxpacket = maxpacket;
@@ -3014,13 +3005,8 @@ __acquires(dev->lock)
 
 		/* link up all endpoints */
 		udc_setup_endpoints(dev);
-		if (dev->gadget.speed == USB_SPEED_HIGH) {
-			dev_info(&dev->pdev->dev, "Connect: speed = %s\n",
-				"high");
-		} else if (dev->gadget.speed == USB_SPEED_FULL) {
-			dev_info(&dev->pdev->dev, "Connect: speed = %s\n",
-				"full");
-		}
+		dev_info(&dev->pdev->dev, "Connect: %s\n",
+			 usb_speed_string(dev->gadget.speed));
 
 		/* init ep 0 */
 		activate_control_endpoints(dev);
diff --git a/drivers/usb/gadget/amd5536udc.h b/drivers/usb/gadget/amd5536udc.h
index 1d1c754..f87e29c 100644
--- a/drivers/usb/gadget/amd5536udc.h
+++ b/drivers/usb/gadget/amd5536udc.h
@@ -8,15 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef AMD5536UDC_H
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index ddb118a..8efe0fa 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -9,16 +9,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the
- * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- * Boston, MA  02111-1307, USA.
  */
 
 #undef	VERBOSE_DEBUG
@@ -460,7 +450,7 @@ static void nuke(struct at91_ep *ep, int status)
 {
 	struct at91_request *req;
 
-	// terminer chaque requete dans la queue
+	/* terminate any request in the queue */
 	ep->stopped = 1;
 	if (list_empty(&ep->queue))
 		return;
@@ -487,7 +477,7 @@ static int at91_ep_enable(struct usb_ep *_ep,
 			|| !desc || ep->desc
 			|| _ep->name == ep0name
 			|| desc->bDescriptorType != USB_DT_ENDPOINT
-			|| (maxpacket = le16_to_cpu(desc->wMaxPacketSize)) == 0
+			|| (maxpacket = usb_endpoint_maxp(desc)) == 0
 			|| maxpacket > ep->maxpacket) {
 		DBG("bad ep or descriptor\n");
 		return -EINVAL;
@@ -788,7 +778,7 @@ static const struct usb_ep_ops at91_ep_ops = {
 	.queue		= at91_ep_queue,
 	.dequeue	= at91_ep_dequeue,
 	.set_halt	= at91_ep_set_halt,
-	// there's only imprecise fifo status reporting
+	/* there's only imprecise fifo status reporting */
 };
 
 /*-------------------------------------------------------------------------*/
@@ -846,7 +836,7 @@ static void udc_reinit(struct at91_udc *udc)
 		ep->fifo_bank = 0;
 		ep->ep.maxpacket = ep->maxpacket;
 		ep->creg = (void __iomem *) udc->udp_baseaddr + AT91_UDP_CSR(i);
-		// initialiser une queue par endpoint
+		/* initialize one queue per endpoint */
 		INIT_LIST_HEAD(&ep->queue);
 	}
 }
@@ -952,7 +942,7 @@ static int at91_vbus_session(struct usb_gadget *gadget, int is_active)
 	struct at91_udc	*udc = to_udc(gadget);
 	unsigned long	flags;
 
-	// VDBG("vbus %s\n", is_active ? "on" : "off");
+	/* VDBG("vbus %s\n", is_active ? "on" : "off"); */
 	spin_lock_irqsave(&udc->lock, flags);
 	udc->vbus = (is_active != 0);
 	if (udc->driver)
@@ -1003,7 +993,7 @@ static const struct usb_gadget_ops at91_udc_ops = {
 	 * VBUS-powered devices may also also want to support bigger
 	 * power budgets after an appropriate SET_CONFIGURATION.
 	 */
-	// .vbus_power		= at91_vbus_power,
+	/* .vbus_power		= at91_vbus_power, */
 };
 
 /*-------------------------------------------------------------------------*/
@@ -1072,7 +1062,7 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr)
 			ep->is_in = 0;
 		}
 	} else {
-		// REVISIT this happens sometimes under load; why??
+		/* REVISIT this happens sometimes under load; why?? */
 		ERR("SETUP len %d, csr %08x\n", rxcount, csr);
 		status = -EINVAL;
 	}
@@ -1451,7 +1441,7 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc)
 			at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXSUSP);
 			at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_RXRSM);
 			at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXSUSP);
-			// VDBG("bus suspend\n");
+			/* VDBG("bus suspend\n"); */
 			if (udc->suspended)
 				continue;
 			udc->suspended = 1;
@@ -1473,7 +1463,7 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc)
 			at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXRSM);
 			at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_RXSUSP);
 			at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXRSM);
-			// VDBG("bus resume\n");
+			/* VDBG("bus resume\n"); */
 			if (!udc->suspended)
 				continue;
 			udc->suspended = 0;
@@ -1820,7 +1810,7 @@ static int __init at91udc_probe(struct platform_device *pdev)
 	/* request UDC and maybe VBUS irqs */
 	udc->udp_irq = platform_get_irq(pdev, 0);
 	retval = request_irq(udc->udp_irq, at91_udc_irq,
-			IRQF_DISABLED, driver_name, udc);
+			0, driver_name, udc);
 	if (retval < 0) {
 		DBG("request irq %d failed\n", udc->udp_irq);
 		goto fail1;
@@ -1848,7 +1838,7 @@ static int __init at91udc_probe(struct platform_device *pdev)
 				  jiffies + VBUS_POLL_TIMEOUT);
 		} else {
 			if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
-					IRQF_DISABLED, driver_name, udc)) {
+					0, driver_name, udc)) {
 				DBG("request vbus irq %d failed\n",
 				    udc->board.vbus_pin);
 				retval = -EBUSY;
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index 108ca54..3c0315b 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -7,16 +7,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the
- * Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  */
 
 #ifndef AT91_UDC_H
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 5b1665e..271a9d8 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -527,7 +527,7 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 
 	DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc);
 
-	maxpacket = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff;
+	maxpacket = usb_endpoint_maxp(desc) & 0x7ff;
 
 	if (((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != ep->index)
 			|| ep->index == 0
@@ -571,7 +571,7 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 		 * Bits 11:12 specify number of _additional_
 		 * transactions per microframe.
 		 */
-		nr_trans = ((le16_to_cpu(desc->wMaxPacketSize) >> 11) & 3) + 1;
+		nr_trans = ((usb_endpoint_maxp(desc) >> 11) & 3) + 1;
 		if (nr_trans > 3)
 			return -EINVAL;
 
@@ -1718,13 +1718,12 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
 			spin_lock(&udc->lock);
 		}
 
-		if (status & USBA_HIGH_SPEED) {
-			DBG(DBG_BUS, "High-speed bus reset detected\n");
+		if (status & USBA_HIGH_SPEED)
 			udc->gadget.speed = USB_SPEED_HIGH;
-		} else {
-			DBG(DBG_BUS, "Full-speed bus reset detected\n");
+		else
 			udc->gadget.speed = USB_SPEED_FULL;
-		}
+		DBG(DBG_BUS, "%s bus reset detected\n",
+		    usb_speed_string(udc->gadget.speed));
 
 		ep0 = &usba_ep[0];
 		ep0->desc = &usba_ep0_desc;
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index b1c1afb..672674c 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -8,15 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/ci13xxx_msm.c b/drivers/usb/gadget/ci13xxx_msm.c
index 470981a..4eedfe5 100644
--- a/drivers/usb/gadget/ci13xxx_msm.c
+++ b/drivers/usb/gadget/ci13xxx_msm.c
@@ -3,17 +3,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
  * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index 1265a85..83428f5 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -2101,7 +2101,7 @@ static int ep_enable(struct usb_ep *ep,
 	mEp->num  = usb_endpoint_num(desc);
 	mEp->type = usb_endpoint_type(desc);
 
-	mEp->ep.maxpacket = __constant_le16_to_cpu(desc->wMaxPacketSize);
+	mEp->ep.maxpacket = usb_endpoint_maxp(desc);
 
 	dbg_event(_usb_addr(mEp), "ENABLE", 0);
 
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index aef4741..8a5529d 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -7,15 +7,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 /* #define VERBOSE_DEBUG */
@@ -164,7 +155,7 @@ int config_ep_by_speed(struct usb_gadget *g,
 
 ep_found:
 	/* commit results */
-	_ep->maxpacket = le16_to_cpu(chosen_desc->wMaxPacketSize);
+	_ep->maxpacket = usb_endpoint_maxp(chosen_desc);
 	_ep->desc = chosen_desc;
 	_ep->comp_desc = NULL;
 	_ep->maxburst = 0;
@@ -551,9 +542,9 @@ static int bos_desc(struct usb_composite_dev *cdev)
 	if (cdev->gadget->ops->get_config_params)
 		cdev->gadget->ops->get_config_params(&dcd_config_params);
 	else {
-		dcd_config_params.bU1devExitLat = USB_DEFULT_U1_DEV_EXIT_LAT;
+		dcd_config_params.bU1devExitLat = USB_DEFAULT_U1_DEV_EXIT_LAT;
 		dcd_config_params.bU2DevExitLat =
-			cpu_to_le16(USB_DEFULT_U2_DEV_EXIT_LAT);
+			cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT);
 	}
 	ss_cap->bU1devExitLat = dcd_config_params.bU1devExitLat;
 	ss_cap->bU2DevExitLat = dcd_config_params.bU2DevExitLat;
@@ -626,25 +617,9 @@ static int set_config(struct usb_composite_dev *cdev,
 		result = 0;
 	}
 
-	INFO(cdev, "%s speed config #%d: %s\n",
-		({ char *speed;
-		switch (gadget->speed) {
-		case USB_SPEED_LOW:
-			speed = "low";
-			break;
-		case USB_SPEED_FULL:
-			speed = "full";
-			break;
-		case USB_SPEED_HIGH:
-			speed = "high";
-			break;
-		case USB_SPEED_SUPER:
-			speed = "super";
-			break;
-		default:
-			speed = "?";
-			break;
-		} ; speed; }), number, c ? c->label : "unconfigured");
+	INFO(cdev, "%s config #%d: %s\n",
+	     usb_speed_string(gadget->speed),
+	     number, c ? c->label : "unconfigured");
 
 	if (!c)
 		goto done;
diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
index b2c0013..7542a72 100644
--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -7,15 +7,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/errno.h>
diff --git a/drivers/usb/gadget/dbgp.c b/drivers/usb/gadget/dbgp.c
index 8beefdd..f855ecf 100644
--- a/drivers/usb/gadget/dbgp.c
+++ b/drivers/usb/gadget/dbgp.c
@@ -4,7 +4,6 @@
  * Copyright (C) 2010 Stephane Duverger
  *
  * Released under the GPLv2.
- *
  */
 
 /* verbose messages */
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index e755a9d..ab8f1b4 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -10,15 +10,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 
@@ -439,7 +430,7 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 	 * maximum packet size.
 	 * For SS devices the wMaxPacketSize is limited by 1024.
 	 */
-	max = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff;
+	max = usb_endpoint_maxp(desc) & 0x7ff;
 
 	/* drivers must not request bad settings, since lower levels
 	 * (hardware or its drivers) may not check.  some endpoints
@@ -1277,7 +1268,7 @@ static int periodic_bytes (struct dummy *dum, struct dummy_ep *ep)
 		int	tmp;
 
 		/* high bandwidth mode */
-		tmp = le16_to_cpu(ep->desc->wMaxPacketSize);
+		tmp = usb_endpoint_maxp(ep->desc);
 		tmp = (tmp >> 11) & 0x03;
 		tmp *= 8 /* applies to entire frame */;
 		limit += limit * tmp;
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 7a7e6b7..596a0b4 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -7,16 +7,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #include <linux/kernel.h>
@@ -158,7 +148,7 @@ ep_matches (
 	 * where it's an output parameter representing the full speed limit.
 	 * the usb spec fixes high speed bulk maxpacket at 512 bytes.
 	 */
-	max = 0x7ff & le16_to_cpu(desc->wMaxPacketSize);
+	max = 0x7ff & usb_endpoint_maxp(desc);
 	switch (type) {
 	case USB_ENDPOINT_XFER_INT:
 		/* INT:  limit 64 bytes full speed, 1024 high/super speed */
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index aafc84f..0cd764d 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -9,15 +9,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index a9a4ead..ec7ffcd 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -460,7 +460,7 @@ static int audio_set_endpoint_req(struct usb_function *f,
 
 	switch (ctrl->bRequest) {
 	case UAC_SET_CUR:
-		value = 0;
+		value = len;
 		break;
 
 	case UAC_SET_MIN:
@@ -499,7 +499,7 @@ static int audio_get_endpoint_req(struct usb_function *f,
 	case UAC_GET_MIN:
 	case UAC_GET_MAX:
 	case UAC_GET_RES:
-		value = 3;
+		value = len;
 		break;
 	case UAC_GET_MEM:
 		break;
@@ -681,17 +681,18 @@ f_audio_bind(struct usb_configuration *c, struct usb_function *f)
 
 	status = -ENOMEM;
 
-	/* supcard all relevant hardware speeds... we expect that when
+	/* copy descriptors, and track endpoint copies */
+	f->descriptors = usb_copy_descriptors(f_audio_desc);
+
+	/*
+	 * support all relevant hardware speeds... we expect that when
 	 * hardware is dual speed, all bulk-capable endpoints work at
 	 * both speeds
 	 */
-
-	/* copy descriptors, and track endpoint copies */
 	if (gadget_is_dualspeed(c->cdev->gadget)) {
 		c->highspeed = true;
 		f->hs_descriptors = usb_copy_descriptors(f_audio_desc);
-	} else
-		f->descriptors = usb_copy_descriptors(f_audio_desc);
+	}
 
 	return 0;
 
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index 3691a0c..11c07cb 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -8,15 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c
index 046c6d0..1a7b2dd 100644
--- a/drivers/usb/gadget/f_eem.c
+++ b/drivers/usb/gadget/f_eem.c
@@ -9,15 +9,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index c161a9a..6b1c20b 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -12,15 +12,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 
diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c
index 83a266b..b211342 100644
--- a/drivers/usb/gadget/f_hid.c
+++ b/drivers/usb/gadget/f_hid.c
@@ -7,15 +7,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c
index ca660d4..6d87f28 100644
--- a/drivers/usb/gadget/f_loopback.c
+++ b/drivers/usb/gadget/f_loopback.c
@@ -8,15 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 5b93395..52583a2 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -112,8 +112,7 @@
  * is not loaded (an empty string as "filename" in the fsg_config
  * structure causes error).  The CD-ROM emulation includes a single
  * data track and no audio tracks; hence there need be only one
- * backing file per LUN.  Note also that the CD-ROM block length is
- * set to 512 rather than the more common value 2048.
+ * backing file per LUN.
  *
  *
  * MSF includes support for module parameters.  If gadget using it
@@ -363,7 +362,7 @@ struct fsg_common {
 
 	struct fsg_buffhd	*next_buffhd_to_fill;
 	struct fsg_buffhd	*next_buffhd_to_drain;
-	struct fsg_buffhd	buffhds[FSG_NUM_BUFFERS];
+	struct fsg_buffhd	*buffhds;
 
 	int			cmnd_size;
 	u8			cmnd[MAX_COMMAND_SIZE];
@@ -745,7 +744,6 @@ static int do_read(struct fsg_common *common)
 	u32			amount_left;
 	loff_t			file_offset, file_offset_tmp;
 	unsigned int		amount;
-	unsigned int		partial_page;
 	ssize_t			nread;
 
 	/*
@@ -771,7 +769,7 @@ static int do_read(struct fsg_common *common)
 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
 		return -EINVAL;
 	}
-	file_offset = ((loff_t) lba) << 9;
+	file_offset = ((loff_t) lba) << curlun->blkbits;
 
 	/* Carry out the file reads */
 	amount_left = common->data_size_from_cmnd;
@@ -784,18 +782,10 @@ static int do_read(struct fsg_common *common)
 		 * Try to read the remaining amount.
 		 * But don't read more than the buffer size.
 		 * And don't try to read past the end of the file.
-		 * Finally, if we're not at a page boundary, don't read past
-		 *	the next page.
-		 * If this means reading 0 then we were asked to read past
-		 *	the end of file.
 		 */
 		amount = min(amount_left, FSG_BUFLEN);
 		amount = min((loff_t)amount,
 			     curlun->file_length - file_offset);
-		partial_page = file_offset & (PAGE_CACHE_SIZE - 1);
-		if (partial_page > 0)
-			amount = min(amount, (unsigned int)PAGE_CACHE_SIZE -
-					     partial_page);
 
 		/* Wait for the next buffer to become available */
 		bh = common->next_buffhd_to_fill;
@@ -812,7 +802,8 @@ static int do_read(struct fsg_common *common)
 		if (amount == 0) {
 			curlun->sense_data =
 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-			curlun->sense_data_info = file_offset >> 9;
+			curlun->sense_data_info =
+					file_offset >> curlun->blkbits;
 			curlun->info_valid = 1;
 			bh->inreq->length = 0;
 			bh->state = BUF_STATE_FULL;
@@ -835,18 +826,25 @@ static int do_read(struct fsg_common *common)
 		} else if (nread < amount) {
 			LDBG(curlun, "partial file read: %d/%u\n",
 			     (int)nread, amount);
-			nread -= (nread & 511);	/* Round down to a block */
+			nread = round_down(nread, curlun->blksize);
 		}
 		file_offset  += nread;
 		amount_left  -= nread;
 		common->residue -= nread;
+
+		/*
+		 * Except at the end of the transfer, nread will be
+		 * equal to the buffer size, which is divisible by the
+		 * bulk-in maxpacket size.
+		 */
 		bh->inreq->length = nread;
 		bh->state = BUF_STATE_FULL;
 
 		/* If an error occurred, report it and its position */
 		if (nread < amount) {
 			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
-			curlun->sense_data_info = file_offset >> 9;
+			curlun->sense_data_info =
+					file_offset >> curlun->blkbits;
 			curlun->info_valid = 1;
 			break;
 		}
@@ -877,7 +875,6 @@ static int do_write(struct fsg_common *common)
 	u32			amount_left_to_req, amount_left_to_write;
 	loff_t			usb_offset, file_offset, file_offset_tmp;
 	unsigned int		amount;
-	unsigned int		partial_page;
 	ssize_t			nwritten;
 	int			rc;
 
@@ -921,7 +918,7 @@ static int do_write(struct fsg_common *common)
 
 	/* Carry out the file writes */
 	get_some_more = 1;
-	file_offset = usb_offset = ((loff_t) lba) << 9;
+	file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
 	amount_left_to_req = common->data_size_from_cmnd;
 	amount_left_to_write = common->data_size_from_cmnd;
 
@@ -933,41 +930,21 @@ static int do_write(struct fsg_common *common)
 
 			/*
 			 * Figure out how much we want to get:
-			 * Try to get the remaining amount.
-			 * But don't get more than the buffer size.
-			 * And don't try to go past the end of the file.
-			 * If we're not at a page boundary,
-			 *	don't go past the next page.
-			 * If this means getting 0, then we were asked
-			 *	to write past the end of file.
-			 * Finally, round down to a block boundary.
+			 * Try to get the remaining amount,
+			 * but not more than the buffer size.
 			 */
 			amount = min(amount_left_to_req, FSG_BUFLEN);
-			amount = min((loff_t)amount,
-				     curlun->file_length - usb_offset);
-			partial_page = usb_offset & (PAGE_CACHE_SIZE - 1);
-			if (partial_page > 0)
-				amount = min(amount,
-	(unsigned int)PAGE_CACHE_SIZE - partial_page);
-
-			if (amount == 0) {
+
+			/* Beyond the end of the backing file? */
+			if (usb_offset >= curlun->file_length) {
 				get_some_more = 0;
 				curlun->sense_data =
 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-				curlun->sense_data_info = usb_offset >> 9;
+				curlun->sense_data_info =
+					usb_offset >> curlun->blkbits;
 				curlun->info_valid = 1;
 				continue;
 			}
-			amount -= amount & 511;
-			if (amount == 0) {
-
-				/*
-				 * Why were we were asked to transfer a
-				 * partial block?
-				 */
-				get_some_more = 0;
-				continue;
-			}
 
 			/* Get the next buffer */
 			usb_offset += amount;
@@ -977,12 +954,11 @@ static int do_write(struct fsg_common *common)
 				get_some_more = 0;
 
 			/*
-			 * amount is always divisible by 512, hence by
-			 * the bulk-out maxpacket size
+			 * Except at the end of the transfer, amount will be
+			 * equal to the buffer size, which is divisible by
+			 * the bulk-out maxpacket size.
 			 */
-			bh->outreq->length = amount;
-			bh->bulk_out_intended_length = amount;
-			bh->outreq->short_not_ok = 1;
+			set_bulk_out_req_length(common, bh, amount);
 			if (!start_out_transfer(common, bh))
 				/* Dunno what to do if common->fsg is NULL */
 				return -EIO;
@@ -1002,7 +978,8 @@ static int do_write(struct fsg_common *common)
 			/* Did something go wrong with the transfer? */
 			if (bh->outreq->status != 0) {
 				curlun->sense_data = SS_COMMUNICATION_FAILURE;
-				curlun->sense_data_info = file_offset >> 9;
+				curlun->sense_data_info =
+					file_offset >> curlun->blkbits;
 				curlun->info_valid = 1;
 				break;
 			}
@@ -1016,6 +993,16 @@ static int do_write(struct fsg_common *common)
 				amount = curlun->file_length - file_offset;
 			}
 
+			/* Don't accept excess data.  The spec doesn't say
+			 * what to do in this case.  We'll ignore the error.
+			 */
+			amount = min(amount, bh->bulk_out_intended_length);
+
+			/* Don't write a partial block */
+			amount = round_down(amount, curlun->blksize);
+			if (amount == 0)
+				goto empty_write;
+
 			/* Perform the write */
 			file_offset_tmp = file_offset;
 			nwritten = vfs_write(curlun->filp,
@@ -1033,8 +1020,7 @@ static int do_write(struct fsg_common *common)
 			} else if (nwritten < amount) {
 				LDBG(curlun, "partial file write: %d/%u\n",
 				     (int)nwritten, amount);
-				nwritten -= (nwritten & 511);
-				/* Round down to a block */
+				nwritten = round_down(nwritten, curlun->blksize);
 			}
 			file_offset += nwritten;
 			amount_left_to_write -= nwritten;
@@ -1043,13 +1029,15 @@ static int do_write(struct fsg_common *common)
 			/* If an error occurred, report it and its position */
 			if (nwritten < amount) {
 				curlun->sense_data = SS_WRITE_ERROR;
-				curlun->sense_data_info = file_offset >> 9;
+				curlun->sense_data_info =
+					file_offset >> curlun->blkbits;
 				curlun->info_valid = 1;
 				break;
 			}
 
+ empty_write:
 			/* Did the host decide to stop early? */
-			if (bh->outreq->actual != bh->outreq->length) {
+			if (bh->outreq->actual < bh->bulk_out_intended_length) {
 				common->short_packet_received = 1;
 				break;
 			}
@@ -1129,8 +1117,8 @@ static int do_verify(struct fsg_common *common)
 		return -EIO;		/* No default reply */
 
 	/* Prepare to carry out the file verify */
-	amount_left = verification_length << 9;
-	file_offset = ((loff_t) lba) << 9;
+	amount_left = verification_length << curlun->blkbits;
+	file_offset = ((loff_t) lba) << curlun->blkbits;
 
 	/* Write out all the dirty buffers before invalidating them */
 	fsg_lun_fsync_sub(curlun);
@@ -1148,8 +1136,6 @@ static int do_verify(struct fsg_common *common)
 		 * Try to read the remaining amount, but not more than
 		 * the buffer size.
 		 * And don't try to read past the end of the file.
-		 * If this means reading 0 then we were asked to read
-		 * past the end of file.
 		 */
 		amount = min(amount_left, FSG_BUFLEN);
 		amount = min((loff_t)amount,
@@ -1157,7 +1143,8 @@ static int do_verify(struct fsg_common *common)
 		if (amount == 0) {
 			curlun->sense_data =
 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-			curlun->sense_data_info = file_offset >> 9;
+			curlun->sense_data_info =
+				file_offset >> curlun->blkbits;
 			curlun->info_valid = 1;
 			break;
 		}
@@ -1179,11 +1166,12 @@ static int do_verify(struct fsg_common *common)
 		} else if (nread < amount) {
 			LDBG(curlun, "partial file verify: %d/%u\n",
 			     (int)nread, amount);
-			nread -= nread & 511;	/* Round down to a sector */
+			nread = round_down(nread, curlun->blksize);
 		}
 		if (nread == 0) {
 			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
-			curlun->sense_data_info = file_offset >> 9;
+			curlun->sense_data_info =
+				file_offset >> curlun->blkbits;
 			curlun->info_valid = 1;
 			break;
 		}
@@ -1289,7 +1277,7 @@ static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh)
 
 	put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
 						/* Max logical block */
-	put_unaligned_be32(512, &buf[4]);	/* Block length */
+	put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
 	return 8;
 }
 
@@ -1527,7 +1515,7 @@ static int do_read_format_capacities(struct fsg_common *common,
 
 	put_unaligned_be32(curlun->num_sectors, &buf[0]);
 						/* Number of blocks */
-	put_unaligned_be32(512, &buf[4]);	/* Block length */
+	put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
 	buf[4] = 0x02;				/* Current capacity */
 	return 12;
 }
@@ -1607,7 +1595,7 @@ static int throw_away_data(struct fsg_common *common)
 			common->next_buffhd_to_drain = bh->next;
 
 			/* A short packet or an error ends everything */
-			if (bh->outreq->actual != bh->outreq->length ||
+			if (bh->outreq->actual < bh->bulk_out_intended_length ||
 			    bh->outreq->status != 0) {
 				raise_exception(common,
 						FSG_STATE_ABORT_BULK_OUT);
@@ -1623,12 +1611,11 @@ static int throw_away_data(struct fsg_common *common)
 			amount = min(common->usb_amount_left, FSG_BUFLEN);
 
 			/*
-			 * amount is always divisible by 512, hence by
+			 * Except at the end of the transfer, amount will be
+			 * equal to the buffer size, which is divisible by
 			 * the bulk-out maxpacket size.
 			 */
-			bh->outreq->length = amount;
-			bh->bulk_out_intended_length = amount;
-			bh->outreq->short_not_ok = 1;
+			set_bulk_out_req_length(common, bh, amount);
 			if (!start_out_transfer(common, bh))
 				/* Dunno what to do if common->fsg is NULL */
 				return -EIO;
@@ -2022,7 +2009,8 @@ static int do_scsi_command(struct fsg_common *common)
 
 	case READ_6:
 		i = common->cmnd[4];
-		common->data_size_from_cmnd = (i == 0 ? 256 : i) << 9;
+		common->data_size_from_cmnd = (i == 0 ? 256 : i) <<
+				common->curlun->blkbits;
 		reply = check_command(common, 6, DATA_DIR_TO_HOST,
 				      (7<<1) | (1<<4), 1,
 				      "READ(6)");
@@ -2032,7 +2020,8 @@ static int do_scsi_command(struct fsg_common *common)
 
 	case READ_10:
 		common->data_size_from_cmnd =
-				get_unaligned_be16(&common->cmnd[7]) << 9;
+				get_unaligned_be16(&common->cmnd[7]) <<
+						common->curlun->blkbits;
 		reply = check_command(common, 10, DATA_DIR_TO_HOST,
 				      (1<<1) | (0xf<<2) | (3<<7), 1,
 				      "READ(10)");
@@ -2042,7 +2031,8 @@ static int do_scsi_command(struct fsg_common *common)
 
 	case READ_12:
 		common->data_size_from_cmnd =
-				get_unaligned_be32(&common->cmnd[6]) << 9;
+				get_unaligned_be32(&common->cmnd[6]) <<
+						common->curlun->blkbits;
 		reply = check_command(common, 12, DATA_DIR_TO_HOST,
 				      (1<<1) | (0xf<<2) | (0xf<<6), 1,
 				      "READ(12)");
@@ -2142,7 +2132,8 @@ static int do_scsi_command(struct fsg_common *common)
 
 	case WRITE_6:
 		i = common->cmnd[4];
-		common->data_size_from_cmnd = (i == 0 ? 256 : i) << 9;
+		common->data_size_from_cmnd = (i == 0 ? 256 : i) <<
+					common->curlun->blkbits;
 		reply = check_command(common, 6, DATA_DIR_FROM_HOST,
 				      (7<<1) | (1<<4), 1,
 				      "WRITE(6)");
@@ -2152,7 +2143,8 @@ static int do_scsi_command(struct fsg_common *common)
 
 	case WRITE_10:
 		common->data_size_from_cmnd =
-				get_unaligned_be16(&common->cmnd[7]) << 9;
+				get_unaligned_be16(&common->cmnd[7]) <<
+						common->curlun->blkbits;
 		reply = check_command(common, 10, DATA_DIR_FROM_HOST,
 				      (1<<1) | (0xf<<2) | (3<<7), 1,
 				      "WRITE(10)");
@@ -2162,7 +2154,8 @@ static int do_scsi_command(struct fsg_common *common)
 
 	case WRITE_12:
 		common->data_size_from_cmnd =
-				get_unaligned_be32(&common->cmnd[6]) << 9;
+				get_unaligned_be32(&common->cmnd[6]) <<
+						common->curlun->blkbits;
 		reply = check_command(common, 12, DATA_DIR_FROM_HOST,
 				      (1<<1) | (0xf<<2) | (0xf<<6), 1,
 				      "WRITE(12)");
@@ -2297,7 +2290,6 @@ static int get_next_command(struct fsg_common *common)
 
 	/* Queue a request to read a Bulk-only CBW */
 	set_bulk_out_req_length(common, bh, USB_BULK_CB_WRAP_LEN);
-	bh->outreq->short_not_ok = 1;
 	if (!start_out_transfer(common, bh))
 		/* Don't know what to do if common->fsg is NULL */
 		return -EIO;
@@ -2348,7 +2340,7 @@ reset:
 	if (common->fsg) {
 		fsg = common->fsg;
 
-		for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+		for (i = 0; i < fsg_num_buffers; ++i) {
 			struct fsg_buffhd *bh = &common->buffhds[i];
 
 			if (bh->inreq) {
@@ -2401,12 +2393,11 @@ reset:
 		goto reset;
 	fsg->bulk_out->driver_data = common;
 	fsg->bulk_out_enabled = 1;
-	common->bulk_out_maxpacket =
-		le16_to_cpu(fsg->bulk_out->desc->wMaxPacketSize);
+	common->bulk_out_maxpacket = usb_endpoint_maxp(fsg->bulk_out->desc);
 	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
 
 	/* Allocate the requests */
-	for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+	for (i = 0; i < fsg_num_buffers; ++i) {
 		struct fsg_buffhd	*bh = &common->buffhds[i];
 
 		rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
@@ -2475,7 +2466,7 @@ static void handle_exception(struct fsg_common *common)
 
 	/* Cancel all the pending transfers */
 	if (likely(common->fsg)) {
-		for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+		for (i = 0; i < fsg_num_buffers; ++i) {
 			bh = &common->buffhds[i];
 			if (bh->inreq_busy)
 				usb_ep_dequeue(common->fsg->bulk_in, bh->inreq);
@@ -2487,7 +2478,7 @@ static void handle_exception(struct fsg_common *common)
 		/* Wait until everything is idle */
 		for (;;) {
 			int num_active = 0;
-			for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+			for (i = 0; i < fsg_num_buffers; ++i) {
 				bh = &common->buffhds[i];
 				num_active += bh->inreq_busy + bh->outreq_busy;
 			}
@@ -2510,7 +2501,7 @@ static void handle_exception(struct fsg_common *common)
 	 */
 	spin_lock_irq(&common->lock);
 
-	for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+	for (i = 0; i < fsg_num_buffers; ++i) {
 		bh = &common->buffhds[i];
 		bh->state = BUF_STATE_EMPTY;
 	}
@@ -2719,6 +2710,10 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 	int nluns, i, rc;
 	char *pathbuf;
 
+	rc = fsg_num_buffers_validate();
+	if (rc != 0)
+		return ERR_PTR(rc);
+
 	/* Find out how many LUNs there should be */
 	nluns = cfg->nluns;
 	if (nluns < 1 || nluns > FSG_MAX_LUNS) {
@@ -2737,6 +2732,14 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 		common->free_storage_on_release = 0;
 	}
 
+	common->buffhds = kcalloc(fsg_num_buffers,
+				  sizeof *(common->buffhds), GFP_KERNEL);
+	if (!common->buffhds) {
+		if (common->free_storage_on_release)
+			kfree(common);
+		return ERR_PTR(-ENOMEM);
+	}
+
 	common->ops = cfg->ops;
 	common->private_data = cfg->private_data;
 
@@ -2814,7 +2817,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 
 	/* Data buffers cyclic list */
 	bh = common->buffhds;
-	i = FSG_NUM_BUFFERS;
+	i = fsg_num_buffers;
 	goto buffhds_first_it;
 	do {
 		bh->next = bh + 1;
@@ -2940,12 +2943,13 @@ static void fsg_common_release(struct kref *ref)
 
 	{
 		struct fsg_buffhd *bh = common->buffhds;
-		unsigned i = FSG_NUM_BUFFERS;
+		unsigned i = fsg_num_buffers;
 		do {
 			kfree(bh->buf);
 		} while (++bh, --i);
 	}
 
+	kfree(common->buffhds);
 	if (common->free_storage_on_release)
 		kfree(common);
 }
@@ -3019,6 +3023,28 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
 		}
 	}
 
+	if (gadget_is_superspeed(gadget)) {
+		unsigned	max_burst;
+
+		/* Calculate bMaxBurst, we know packet size is 1024 */
+		max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15);
+
+		fsg_ss_bulk_in_desc.bEndpointAddress =
+			fsg_fs_bulk_in_desc.bEndpointAddress;
+		fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
+
+		fsg_ss_bulk_out_desc.bEndpointAddress =
+			fsg_fs_bulk_out_desc.bEndpointAddress;
+		fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
+
+		f->ss_descriptors = usb_copy_descriptors(fsg_ss_function);
+		if (unlikely(!f->ss_descriptors)) {
+			usb_free_descriptors(f->hs_descriptors);
+			usb_free_descriptors(f->descriptors);
+			return -ENOMEM;
+		}
+	}
+
 	return 0;
 
 autoconf_fail:
diff --git a/drivers/usb/gadget/f_midi.c b/drivers/usb/gadget/f_midi.c
new file mode 100644
index 0000000..67b2229
--- /dev/null
+++ b/drivers/usb/gadget/f_midi.c
@@ -0,0 +1,998 @@
+/*
+ * f_midi.c -- USB MIDI class function driver
+ *
+ * Copyright (C) 2006 Thumtronics Pty Ltd.
+ * Developed for Thumtronics by Grey Innovation
+ * Ben Williamson <ben.williamson@greyinnovation.com>
+ *
+ * Rewritten for the composite framework
+ *   Copyright (C) 2011 Daniel Mack <zonque@gmail.com>
+ *
+ * Based on drivers/usb/gadget/f_audio.c,
+ *   Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
+ *   Copyright (C) 2008 Analog Devices, Inc
+ *
+ * and drivers/usb/gadget/midi.c,
+ *   Copyright (C) 2006 Thumtronics Pty Ltd.
+ *   Ben Williamson <ben.williamson@greyinnovation.com>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/utsname.h>
+#include <linux/device.h>
+
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/rawmidi.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/audio.h>
+#include <linux/usb/midi.h>
+
+MODULE_AUTHOR("Ben Williamson");
+MODULE_LICENSE("GPL v2");
+
+static const char f_midi_shortname[] = "f_midi";
+static const char f_midi_longname[] = "MIDI Gadget";
+
+/*
+ * We can only handle 16 cables on one single endpoint, as cable numbers are
+ * stored in 4-bit fields. And as the interface currently only holds one
+ * single endpoint, this is the maximum number of ports we can allow.
+ */
+#define MAX_PORTS 16
+
+/*
+ * This is a gadget, and the IN/OUT naming is from the host's perspective.
+ * USB -> OUT endpoint -> rawmidi
+ * USB <- IN endpoint  <- rawmidi
+ */
+struct gmidi_in_port {
+	struct f_midi *midi;
+	int active;
+	uint8_t cable;
+	uint8_t state;
+#define STATE_UNKNOWN	0
+#define STATE_1PARAM	1
+#define STATE_2PARAM_1	2
+#define STATE_2PARAM_2	3
+#define STATE_SYSEX_0	4
+#define STATE_SYSEX_1	5
+#define STATE_SYSEX_2	6
+	uint8_t data[2];
+};
+
+struct f_midi {
+	struct usb_function	func;
+	struct usb_gadget	*gadget;
+	struct usb_ep		*in_ep, *out_ep;
+	struct snd_card		*card;
+	struct snd_rawmidi	*rmidi;
+
+	struct snd_rawmidi_substream *in_substream[MAX_PORTS];
+	struct snd_rawmidi_substream *out_substream[MAX_PORTS];
+	struct gmidi_in_port	*in_port[MAX_PORTS];
+
+	unsigned long		out_triggered;
+	struct tasklet_struct	tasklet;
+	unsigned int in_ports;
+	unsigned int out_ports;
+	int index;
+	char *id;
+	unsigned int buflen, qlen;
+};
+
+static inline struct f_midi *func_to_midi(struct usb_function *f)
+{
+	return container_of(f, struct f_midi, func);
+}
+
+static void f_midi_transmit(struct f_midi *midi, struct usb_request *req);
+
+DECLARE_UAC_AC_HEADER_DESCRIPTOR(1);
+DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1);
+DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(16);
+DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(16);
+
+/* B.3.1  Standard AC Interface Descriptor */
+static struct usb_interface_descriptor ac_interface_desc __initdata = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+	/* .bInterfaceNumber =	DYNAMIC */
+	/* .bNumEndpoints =	DYNAMIC */
+	.bInterfaceClass =	USB_CLASS_AUDIO,
+	.bInterfaceSubClass =	USB_SUBCLASS_AUDIOCONTROL,
+	/* .iInterface =	DYNAMIC */
+};
+
+/* B.3.2  Class-Specific AC Interface Descriptor */
+static struct uac1_ac_header_descriptor_1 ac_header_desc __initdata = {
+	.bLength =		UAC_DT_AC_HEADER_SIZE(1),
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =	USB_MS_HEADER,
+	.bcdADC =		cpu_to_le16(0x0100),
+	.wTotalLength =		cpu_to_le16(UAC_DT_AC_HEADER_SIZE(1)),
+	.bInCollection =	1,
+	/* .baInterfaceNr =	DYNAMIC */
+};
+
+/* B.4.1  Standard MS Interface Descriptor */
+static struct usb_interface_descriptor ms_interface_desc __initdata = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+	/* .bInterfaceNumber =	DYNAMIC */
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_AUDIO,
+	.bInterfaceSubClass =	USB_SUBCLASS_MIDISTREAMING,
+	/* .iInterface =	DYNAMIC */
+};
+
+/* B.4.2  Class-Specific MS Interface Descriptor */
+static struct usb_ms_header_descriptor ms_header_desc __initdata = {
+	.bLength =		USB_DT_MS_HEADER_SIZE,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =	USB_MS_HEADER,
+	.bcdMSC =		cpu_to_le16(0x0100),
+	/* .wTotalLength =	DYNAMIC */
+};
+
+/* B.4.3  Embedded MIDI IN Jack Descriptor */
+static struct usb_midi_in_jack_descriptor jack_in_emb_desc = {
+	.bLength =	      USB_DT_MIDI_IN_SIZE,
+	.bDescriptorType =      USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =   USB_MS_MIDI_IN_JACK,
+	.bJackType =	    USB_MS_EMBEDDED,
+	/* .bJackID =		DYNAMIC */
+};
+
+/* B.4.4  Embedded MIDI OUT Jack Descriptor */
+static struct usb_midi_out_jack_descriptor_16 jack_out_emb_desc = {
+	/* .bLength =		DYNAMIC */
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubtype =	USB_MS_MIDI_OUT_JACK,
+	.bJackType =		USB_MS_EMBEDDED,
+	/* .bJackID =		DYNAMIC */
+	/* .bNrInputPins =	DYNAMIC */
+	/* .pins =		DYNAMIC */
+};
+
+/* B.5.1  Standard Bulk OUT Endpoint Descriptor */
+static struct usb_endpoint_descriptor bulk_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_AUDIO_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+/* B.5.2  Class-specific MS Bulk OUT Endpoint Descriptor */
+static struct usb_ms_endpoint_descriptor_16 ms_out_desc = {
+	/* .bLength =		DYNAMIC */
+	.bDescriptorType =	USB_DT_CS_ENDPOINT,
+	.bDescriptorSubtype =	USB_MS_GENERAL,
+	/* .bNumEmbMIDIJack =	DYNAMIC */
+	/* .baAssocJackID =	DYNAMIC */
+};
+
+/* B.6.1  Standard Bulk IN Endpoint Descriptor */
+static struct usb_endpoint_descriptor bulk_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_AUDIO_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+/* B.6.2  Class-specific MS Bulk IN Endpoint Descriptor */
+static struct usb_ms_endpoint_descriptor_16 ms_in_desc = {
+	/* .bLength =		DYNAMIC */
+	.bDescriptorType =	USB_DT_CS_ENDPOINT,
+	.bDescriptorSubtype =	USB_MS_GENERAL,
+	/* .bNumEmbMIDIJack =	DYNAMIC */
+	/* .baAssocJackID =	DYNAMIC */
+};
+
+/* string IDs are assigned dynamically */
+
+#define STRING_FUNC_IDX			0
+
+static struct usb_string midi_string_defs[] = {
+	[STRING_FUNC_IDX].s = "MIDI function",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings midi_stringtab = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= midi_string_defs,
+};
+
+static struct usb_gadget_strings *midi_strings[] = {
+	&midi_stringtab,
+	NULL,
+};
+
+static struct usb_request *alloc_ep_req(struct usb_ep *ep, unsigned length)
+{
+	struct usb_request *req;
+
+	req = usb_ep_alloc_request(ep, GFP_ATOMIC);
+	if (req) {
+		req->length = length;
+		req->buf = kmalloc(length, GFP_ATOMIC);
+		if (!req->buf) {
+			usb_ep_free_request(ep, req);
+			req = NULL;
+		}
+	}
+	return req;
+}
+
+static void free_ep_req(struct usb_ep *ep, struct usb_request *req)
+{
+	kfree(req->buf);
+	usb_ep_free_request(ep, req);
+}
+
+static const uint8_t f_midi_cin_length[] = {
+	0, 0, 2, 3, 3, 1, 2, 3, 3, 3, 3, 3, 2, 2, 3, 1
+};
+
+/*
+ * Receives a chunk of MIDI data.
+ */
+static void f_midi_read_data(struct usb_ep *ep, int cable,
+			     uint8_t *data, int length)
+{
+	struct f_midi *midi = ep->driver_data;
+	struct snd_rawmidi_substream *substream = midi->out_substream[cable];
+
+	if (!substream)
+		/* Nobody is listening - throw it on the floor. */
+		return;
+
+	if (!test_bit(cable, &midi->out_triggered))
+		return;
+
+	snd_rawmidi_receive(substream, data, length);
+}
+
+static void f_midi_handle_out_data(struct usb_ep *ep, struct usb_request *req)
+{
+	unsigned int i;
+	u8 *buf = req->buf;
+
+	for (i = 0; i + 3 < req->actual; i += 4)
+		if (buf[i] != 0) {
+			int cable = buf[i] >> 4;
+			int length = f_midi_cin_length[buf[i] & 0x0f];
+			f_midi_read_data(ep, cable, &buf[i + 1], length);
+		}
+}
+
+static void
+f_midi_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_midi *midi = ep->driver_data;
+	struct usb_composite_dev *cdev = midi->func.config->cdev;
+	int status = req->status;
+
+	switch (status) {
+	case 0:			 /* normal completion */
+		if (ep == midi->out_ep) {
+			/* We received stuff. req is queued again, below */
+			f_midi_handle_out_data(ep, req);
+		} else if (ep == midi->in_ep) {
+			/* Our transmit completed. See if there's more to go.
+			 * f_midi_transmit eats req, don't queue it again. */
+			f_midi_transmit(midi, req);
+			return;
+		}
+		break;
+
+	/* this endpoint is normally active while we're configured */
+	case -ECONNABORTED:	/* hardware forced ep reset */
+	case -ECONNRESET:	/* request dequeued */
+	case -ESHUTDOWN:	/* disconnect from host */
+		VDBG(cdev, "%s gone (%d), %d/%d\n", ep->name, status,
+				req->actual, req->length);
+		if (ep == midi->out_ep)
+			f_midi_handle_out_data(ep, req);
+
+		free_ep_req(ep, req);
+		return;
+
+	case -EOVERFLOW:	/* buffer overrun on read means that
+				 * we didn't provide a big enough buffer.
+				 */
+	default:
+		DBG(cdev, "%s complete --> %d, %d/%d\n", ep->name,
+				status, req->actual, req->length);
+		break;
+	case -EREMOTEIO:	/* short read */
+		break;
+	}
+
+	status = usb_ep_queue(ep, req, GFP_ATOMIC);
+	if (status) {
+		ERROR(cdev, "kill %s:  resubmit %d bytes --> %d\n",
+				ep->name, req->length, status);
+		usb_ep_set_halt(ep);
+		/* FIXME recover later ... somehow */
+	}
+}
+
+static int f_midi_start_ep(struct f_midi *midi,
+			   struct usb_function *f,
+			   struct usb_ep *ep)
+{
+	int err;
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	if (ep->driver_data)
+		usb_ep_disable(ep);
+
+	err = config_ep_by_speed(midi->gadget, f, ep);
+	if (err) {
+		ERROR(cdev, "can't configure %s: %d\n", ep->name, err);
+		return err;
+	}
+
+	err = usb_ep_enable(ep);
+	if (err) {
+		ERROR(cdev, "can't start %s: %d\n", ep->name, err);
+		return err;
+	}
+
+	ep->driver_data = midi;
+
+	return 0;
+}
+
+static int f_midi_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct f_midi *midi = func_to_midi(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	unsigned i;
+	int err;
+
+	err = f_midi_start_ep(midi, f, midi->in_ep);
+	if (err)
+		return err;
+
+	err = f_midi_start_ep(midi, f, midi->out_ep);
+	if (err)
+		return err;
+
+	if (midi->out_ep->driver_data)
+		usb_ep_disable(midi->out_ep);
+
+	err = config_ep_by_speed(midi->gadget, f, midi->out_ep);
+	if (err) {
+		ERROR(cdev, "can't configure %s: %d\n",
+		      midi->out_ep->name, err);
+		return err;
+	}
+
+	err = usb_ep_enable(midi->out_ep);
+	if (err) {
+		ERROR(cdev, "can't start %s: %d\n",
+		      midi->out_ep->name, err);
+		return err;
+	}
+
+	midi->out_ep->driver_data = midi;
+
+	/* allocate a bunch of read buffers and queue them all at once. */
+	for (i = 0; i < midi->qlen && err == 0; i++) {
+		struct usb_request *req =
+			alloc_ep_req(midi->out_ep, midi->buflen);
+		if (req == NULL)
+			return -ENOMEM;
+
+		req->complete = f_midi_complete;
+		err = usb_ep_queue(midi->out_ep, req, GFP_ATOMIC);
+		if (err) {
+			ERROR(midi, "%s queue req: %d\n",
+				    midi->out_ep->name, err);
+		}
+	}
+
+	return 0;
+}
+
+static void f_midi_disable(struct usb_function *f)
+{
+	struct f_midi *midi = func_to_midi(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	DBG(cdev, "disable\n");
+
+	/*
+	 * just disable endpoints, forcing completion of pending i/o.
+	 * all our completion handlers free their requests in this case.
+	 */
+	usb_ep_disable(midi->in_ep);
+	usb_ep_disable(midi->out_ep);
+}
+
+static void f_midi_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct f_midi *midi = func_to_midi(f);
+	struct snd_card *card;
+
+	DBG(cdev, "unbind\n");
+
+	/* just to be sure */
+	f_midi_disable(f);
+
+	card = midi->card;
+	midi->card = NULL;
+	if (card)
+		snd_card_free(card);
+
+	kfree(midi->id);
+	midi->id = NULL;
+
+	usb_free_descriptors(f->descriptors);
+	kfree(midi);
+}
+
+static int f_midi_snd_free(struct snd_device *device)
+{
+	return 0;
+}
+
+static void f_midi_transmit_packet(struct usb_request *req, uint8_t p0,
+					uint8_t p1, uint8_t p2, uint8_t p3)
+{
+	unsigned length = req->length;
+	u8 *buf = (u8 *)req->buf + length;
+
+	buf[0] = p0;
+	buf[1] = p1;
+	buf[2] = p2;
+	buf[3] = p3;
+	req->length = length + 4;
+}
+
+/*
+ * Converts MIDI commands to USB MIDI packets.
+ */
+static void f_midi_transmit_byte(struct usb_request *req,
+				 struct gmidi_in_port *port, uint8_t b)
+{
+	uint8_t p0 = port->cable << 4;
+
+	if (b >= 0xf8) {
+		f_midi_transmit_packet(req, p0 | 0x0f, b, 0, 0);
+	} else if (b >= 0xf0) {
+		switch (b) {
+		case 0xf0:
+			port->data[0] = b;
+			port->state = STATE_SYSEX_1;
+			break;
+		case 0xf1:
+		case 0xf3:
+			port->data[0] = b;
+			port->state = STATE_1PARAM;
+			break;
+		case 0xf2:
+			port->data[0] = b;
+			port->state = STATE_2PARAM_1;
+			break;
+		case 0xf4:
+		case 0xf5:
+			port->state = STATE_UNKNOWN;
+			break;
+		case 0xf6:
+			f_midi_transmit_packet(req, p0 | 0x05, 0xf6, 0, 0);
+			port->state = STATE_UNKNOWN;
+			break;
+		case 0xf7:
+			switch (port->state) {
+			case STATE_SYSEX_0:
+				f_midi_transmit_packet(req,
+					p0 | 0x05, 0xf7, 0, 0);
+				break;
+			case STATE_SYSEX_1:
+				f_midi_transmit_packet(req,
+					p0 | 0x06, port->data[0], 0xf7, 0);
+				break;
+			case STATE_SYSEX_2:
+				f_midi_transmit_packet(req,
+					p0 | 0x07, port->data[0],
+					port->data[1], 0xf7);
+				break;
+			}
+			port->state = STATE_UNKNOWN;
+			break;
+		}
+	} else if (b >= 0x80) {
+		port->data[0] = b;
+		if (b >= 0xc0 && b <= 0xdf)
+			port->state = STATE_1PARAM;
+		else
+			port->state = STATE_2PARAM_1;
+	} else { /* b < 0x80 */
+		switch (port->state) {
+		case STATE_1PARAM:
+			if (port->data[0] < 0xf0) {
+				p0 |= port->data[0] >> 4;
+			} else {
+				p0 |= 0x02;
+				port->state = STATE_UNKNOWN;
+			}
+			f_midi_transmit_packet(req, p0, port->data[0], b, 0);
+			break;
+		case STATE_2PARAM_1:
+			port->data[1] = b;
+			port->state = STATE_2PARAM_2;
+			break;
+		case STATE_2PARAM_2:
+			if (port->data[0] < 0xf0) {
+				p0 |= port->data[0] >> 4;
+				port->state = STATE_2PARAM_1;
+			} else {
+				p0 |= 0x03;
+				port->state = STATE_UNKNOWN;
+			}
+			f_midi_transmit_packet(req,
+				p0, port->data[0], port->data[1], b);
+			break;
+		case STATE_SYSEX_0:
+			port->data[0] = b;
+			port->state = STATE_SYSEX_1;
+			break;
+		case STATE_SYSEX_1:
+			port->data[1] = b;
+			port->state = STATE_SYSEX_2;
+			break;
+		case STATE_SYSEX_2:
+			f_midi_transmit_packet(req,
+				p0 | 0x04, port->data[0], port->data[1], b);
+			port->state = STATE_SYSEX_0;
+			break;
+		}
+	}
+}
+
+static void f_midi_transmit(struct f_midi *midi, struct usb_request *req)
+{
+	struct usb_ep *ep = midi->in_ep;
+	int i;
+
+	if (!ep)
+		return;
+
+	if (!req)
+		req = alloc_ep_req(ep, midi->buflen);
+
+	if (!req) {
+		ERROR(midi, "gmidi_transmit: alloc_ep_request failed\n");
+		return;
+	}
+	req->length = 0;
+	req->complete = f_midi_complete;
+
+	for (i = 0; i < MAX_PORTS; i++) {
+		struct gmidi_in_port *port = midi->in_port[i];
+		struct snd_rawmidi_substream *substream = midi->in_substream[i];
+
+		if (!port || !port->active || !substream)
+			continue;
+
+		while (req->length + 3 < midi->buflen) {
+			uint8_t b;
+			if (snd_rawmidi_transmit(substream, &b, 1) != 1) {
+				port->active = 0;
+				break;
+			}
+			f_midi_transmit_byte(req, port, b);
+		}
+	}
+
+	if (req->length > 0)
+		usb_ep_queue(ep, req, GFP_ATOMIC);
+	else
+		free_ep_req(ep, req);
+}
+
+static void f_midi_in_tasklet(unsigned long data)
+{
+	struct f_midi *midi = (struct f_midi *) data;
+	f_midi_transmit(midi, NULL);
+}
+
+static int f_midi_in_open(struct snd_rawmidi_substream *substream)
+{
+	struct f_midi *midi = substream->rmidi->private_data;
+
+	if (!midi->in_port[substream->number])
+		return -EINVAL;
+
+	VDBG(midi, "%s()\n", __func__);
+	midi->in_substream[substream->number] = substream;
+	midi->in_port[substream->number]->state = STATE_UNKNOWN;
+	return 0;
+}
+
+static int f_midi_in_close(struct snd_rawmidi_substream *substream)
+{
+	struct f_midi *midi = substream->rmidi->private_data;
+
+	VDBG(midi, "%s()\n", __func__);
+	return 0;
+}
+
+static void f_midi_in_trigger(struct snd_rawmidi_substream *substream, int up)
+{
+	struct f_midi *midi = substream->rmidi->private_data;
+
+	if (!midi->in_port[substream->number])
+		return;
+
+	VDBG(midi, "%s() %d\n", __func__, up);
+	midi->in_port[substream->number]->active = up;
+	if (up)
+		tasklet_hi_schedule(&midi->tasklet);
+}
+
+static int f_midi_out_open(struct snd_rawmidi_substream *substream)
+{
+	struct f_midi *midi = substream->rmidi->private_data;
+
+	if (substream->number >= MAX_PORTS)
+		return -EINVAL;
+
+	VDBG(midi, "%s()\n", __func__);
+	midi->out_substream[substream->number] = substream;
+	return 0;
+}
+
+static int f_midi_out_close(struct snd_rawmidi_substream *substream)
+{
+	struct f_midi *midi = substream->rmidi->private_data;
+
+	VDBG(midi, "%s()\n", __func__);
+	return 0;
+}
+
+static void f_midi_out_trigger(struct snd_rawmidi_substream *substream, int up)
+{
+	struct f_midi *midi = substream->rmidi->private_data;
+
+	VDBG(midi, "%s()\n", __func__);
+
+	if (up)
+		set_bit(substream->number, &midi->out_triggered);
+	else
+		clear_bit(substream->number, &midi->out_triggered);
+}
+
+static struct snd_rawmidi_ops gmidi_in_ops = {
+	.open = f_midi_in_open,
+	.close = f_midi_in_close,
+	.trigger = f_midi_in_trigger,
+};
+
+static struct snd_rawmidi_ops gmidi_out_ops = {
+	.open = f_midi_out_open,
+	.close = f_midi_out_close,
+	.trigger = f_midi_out_trigger
+};
+
+/* register as a sound "card" */
+static int f_midi_register_card(struct f_midi *midi)
+{
+	struct snd_card *card;
+	struct snd_rawmidi *rmidi;
+	int err;
+	static struct snd_device_ops ops = {
+		.dev_free = f_midi_snd_free,
+	};
+
+	err = snd_card_create(midi->index, midi->id, THIS_MODULE, 0, &card);
+	if (err < 0) {
+		ERROR(midi, "snd_card_create() failed\n");
+		goto fail;
+	}
+	midi->card = card;
+
+	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, midi, &ops);
+	if (err < 0) {
+		ERROR(midi, "snd_device_new() failed: error %d\n", err);
+		goto fail;
+	}
+
+	strcpy(card->driver, f_midi_longname);
+	strcpy(card->longname, f_midi_longname);
+	strcpy(card->shortname, f_midi_shortname);
+
+	/* Set up rawmidi */
+	snd_component_add(card, "MIDI");
+	err = snd_rawmidi_new(card, card->longname, 0,
+			      midi->out_ports, midi->in_ports, &rmidi);
+	if (err < 0) {
+		ERROR(midi, "snd_rawmidi_new() failed: error %d\n", err);
+		goto fail;
+	}
+	midi->rmidi = rmidi;
+	strcpy(rmidi->name, card->shortname);
+	rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT |
+			    SNDRV_RAWMIDI_INFO_INPUT |
+			    SNDRV_RAWMIDI_INFO_DUPLEX;
+	rmidi->private_data = midi;
+
+	/*
+	 * Yes, rawmidi OUTPUT = USB IN, and rawmidi INPUT = USB OUT.
+	 * It's an upside-down world being a gadget.
+	 */
+	snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, &gmidi_in_ops);
+	snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, &gmidi_out_ops);
+
+	snd_card_set_dev(card, &midi->gadget->dev);
+
+	/* register it - we're ready to go */
+	err = snd_card_register(card);
+	if (err < 0) {
+		ERROR(midi, "snd_card_register() failed\n");
+		goto fail;
+	}
+
+	VDBG(midi, "%s() finished ok\n", __func__);
+	return 0;
+
+fail:
+	if (midi->card) {
+		snd_card_free(midi->card);
+		midi->card = NULL;
+	}
+	return err;
+}
+
+/* MIDI function driver setup/binding */
+
+static int __init
+f_midi_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_descriptor_header *midi_function[(MAX_PORTS * 2) + 12];
+	struct usb_midi_in_jack_descriptor jack_in_ext_desc[MAX_PORTS];
+	struct usb_midi_out_jack_descriptor_1 jack_out_ext_desc[MAX_PORTS];
+	struct usb_composite_dev *cdev = c->cdev;
+	struct f_midi *midi = func_to_midi(f);
+	int status, n, jack = 1, i = 0;
+
+	/* maybe allocate device-global string ID */
+	if (midi_string_defs[0].id == 0) {
+		status = usb_string_id(c->cdev);
+		if (status < 0)
+			goto fail;
+		midi_string_defs[0].id = status;
+	}
+
+	/* We have two interfaces, AudioControl and MIDIStreaming */
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	ac_interface_desc.bInterfaceNumber = status;
+
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	ms_interface_desc.bInterfaceNumber = status;
+	ac_header_desc.baInterfaceNr[0] = status;
+
+	status = -ENODEV;
+
+	/* allocate instance-specific endpoints */
+	midi->in_ep = usb_ep_autoconfig(cdev->gadget, &bulk_in_desc);
+	if (!midi->in_ep)
+		goto fail;
+	midi->in_ep->driver_data = cdev;	/* claim */
+
+	midi->out_ep = usb_ep_autoconfig(cdev->gadget, &bulk_out_desc);
+	if (!midi->out_ep)
+		goto fail;
+	midi->out_ep->driver_data = cdev;	/* claim */
+
+	/*
+	 * construct the function's descriptor set. As the number of
+	 * input and output MIDI ports is configurable, we have to do
+	 * it that way.
+	 */
+
+	/* add the headers - these are always the same */
+	midi_function[i++] = (struct usb_descriptor_header *) &ac_interface_desc;
+	midi_function[i++] = (struct usb_descriptor_header *) &ac_header_desc;
+	midi_function[i++] = (struct usb_descriptor_header *) &ms_interface_desc;
+
+	/* calculate the header's wTotalLength */
+	n = USB_DT_MS_HEADER_SIZE
+		+ (1 + midi->in_ports) * USB_DT_MIDI_IN_SIZE
+		+ (1 + midi->out_ports) * USB_DT_MIDI_OUT_SIZE(1);
+	ms_header_desc.wTotalLength = cpu_to_le16(n);
+
+	midi_function[i++] = (struct usb_descriptor_header *) &ms_header_desc;
+
+	/* we have one embedded IN jack */
+	jack_in_emb_desc.bJackID = jack++;
+	midi_function[i++] = (struct usb_descriptor_header *) &jack_in_emb_desc;
+
+	/* and a dynamic amount of external IN jacks */
+	for (n = 0; n < midi->in_ports; n++) {
+		struct usb_midi_in_jack_descriptor *ext = &jack_in_ext_desc[n];
+
+		ext->bLength =			USB_DT_MIDI_IN_SIZE;
+		ext->bDescriptorType =		USB_DT_CS_INTERFACE;
+		ext->bDescriptorSubtype =	USB_MS_MIDI_IN_JACK;
+		ext->bJackType =		USB_MS_EXTERNAL;
+		ext->bJackID =			jack++;
+		ext->iJack =			0;
+
+		midi_function[i++] = (struct usb_descriptor_header *) ext;
+	}
+
+	/* one embedded OUT jack ... */
+	jack_out_emb_desc.bLength = USB_DT_MIDI_OUT_SIZE(midi->in_ports);
+	jack_out_emb_desc.bJackID = jack++;
+	jack_out_emb_desc.bNrInputPins = midi->in_ports;
+	/* ... which referencess all external IN jacks */
+	for (n = 0; n < midi->in_ports; n++) {
+		jack_out_emb_desc.pins[n].baSourceID = jack_in_ext_desc[n].bJackID;
+		jack_out_emb_desc.pins[n].baSourcePin =	1;
+	}
+
+	midi_function[i++] = (struct usb_descriptor_header *) &jack_out_emb_desc;
+
+	/* and multiple external OUT jacks ... */
+	for (n = 0; n < midi->out_ports; n++) {
+		struct usb_midi_out_jack_descriptor_1 *ext = &jack_out_ext_desc[n];
+		int m;
+
+		ext->bLength =			USB_DT_MIDI_OUT_SIZE(1);
+		ext->bDescriptorType =		USB_DT_CS_INTERFACE;
+		ext->bDescriptorSubtype =	USB_MS_MIDI_OUT_JACK;
+		ext->bJackType =		USB_MS_EXTERNAL;
+		ext->bJackID =			jack++;
+		ext->bNrInputPins =		1;
+		ext->iJack =			0;
+		/* ... which all reference the same embedded IN jack */
+		for (m = 0; m < midi->out_ports; m++) {
+			ext->pins[m].baSourceID =	jack_in_emb_desc.bJackID;
+			ext->pins[m].baSourcePin =	1;
+		}
+
+		midi_function[i++] = (struct usb_descriptor_header *) ext;
+	}
+
+	/* configure the endpoint descriptors ... */
+	ms_out_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->in_ports);
+	ms_out_desc.bNumEmbMIDIJack = midi->in_ports;
+	for (n = 0; n < midi->in_ports; n++)
+		ms_out_desc.baAssocJackID[n] = jack_in_emb_desc.bJackID;
+
+	ms_in_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->out_ports);
+	ms_in_desc.bNumEmbMIDIJack = midi->out_ports;
+	for (n = 0; n < midi->out_ports; n++)
+		ms_in_desc.baAssocJackID[n] = jack_out_emb_desc.bJackID;
+
+	/* ... and add them to the list */
+	midi_function[i++] = (struct usb_descriptor_header *) &bulk_out_desc;
+	midi_function[i++] = (struct usb_descriptor_header *) &ms_out_desc;
+	midi_function[i++] = (struct usb_descriptor_header *) &bulk_in_desc;
+	midi_function[i++] = (struct usb_descriptor_header *) &ms_in_desc;
+	midi_function[i++] = NULL;
+
+	/*
+	 * support all relevant hardware speeds... we expect that when
+	 * hardware is dual speed, all bulk-capable endpoints work at
+	 * both speeds
+	 */
+	/* copy descriptors, and track endpoint copies */
+	if (gadget_is_dualspeed(c->cdev->gadget)) {
+		c->highspeed = true;
+		bulk_in_desc.wMaxPacketSize = cpu_to_le16(512);
+		bulk_out_desc.wMaxPacketSize = cpu_to_le16(512);
+		f->hs_descriptors = usb_copy_descriptors(midi_function);
+	} else {
+		f->descriptors = usb_copy_descriptors(midi_function);
+	}
+
+	return 0;
+
+fail:
+	/* we might as well release our claims on endpoints */
+	if (midi->out_ep)
+		midi->out_ep->driver_data = NULL;
+	if (midi->in_ep)
+		midi->in_ep->driver_data = NULL;
+
+	ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
+
+	return status;
+}
+
+/**
+ * f_midi_bind_config - add USB MIDI function to a configuration
+ * @c: the configuration to supcard the USB audio function
+ * @index: the soundcard index to use for the ALSA device creation
+ * @id: the soundcard id to use for the ALSA device creation
+ * @buflen: the buffer length to use
+ * @qlen the number of read requests to pre-allocate
+ * Context: single threaded during gadget setup
+ *
+ * Returns zero on success, else negative errno.
+ */
+int __init f_midi_bind_config(struct usb_configuration *c,
+			      int index, char *id,
+			      unsigned int in_ports,
+			      unsigned int out_ports,
+			      unsigned int buflen,
+			      unsigned int qlen)
+{
+	struct f_midi *midi;
+	int status, i;
+
+	/* sanity check */
+	if (in_ports > MAX_PORTS || out_ports > MAX_PORTS)
+		return -EINVAL;
+
+	/* allocate and initialize one new instance */
+	midi = kzalloc(sizeof *midi, GFP_KERNEL);
+	if (!midi) {
+		status = -ENOMEM;
+		goto fail;
+	}
+
+	for (i = 0; i < in_ports; i++) {
+		struct gmidi_in_port *port = kzalloc(sizeof(*port), GFP_KERNEL);
+		if (!port) {
+			status = -ENOMEM;
+			goto setup_fail;
+		}
+
+		port->midi = midi;
+		port->active = 0;
+		port->cable = i;
+		midi->in_port[i] = port;
+	}
+
+	midi->gadget = c->cdev->gadget;
+	tasklet_init(&midi->tasklet, f_midi_in_tasklet, (unsigned long) midi);
+
+	/* set up ALSA midi devices */
+	midi->in_ports = in_ports;
+	midi->out_ports = out_ports;
+	status = f_midi_register_card(midi);
+	if (status < 0)
+		goto setup_fail;
+
+	midi->func.name        = "gmidi function";
+	midi->func.strings     = midi_strings;
+	midi->func.bind        = f_midi_bind;
+	midi->func.unbind      = f_midi_unbind;
+	midi->func.set_alt     = f_midi_set_alt;
+	midi->func.disable     = f_midi_disable;
+
+	midi->id = kstrdup(id, GFP_KERNEL);
+	midi->index = index;
+	midi->buflen = buflen;
+	midi->qlen = qlen;
+
+	status = usb_add_function(c, &midi->func);
+	if (status)
+		goto setup_fail;
+
+	return 0;
+
+setup_fail:
+	for (--i; i >= 0; i--)
+		kfree(midi->in_port[i]);
+	kfree(midi);
+fail:
+	return status;
+}
+
diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c
index ae69ed7..aab8ede 100644
--- a/drivers/usb/gadget/f_ncm.c
+++ b/drivers/usb/gadget/f_ncm.c
@@ -13,15 +13,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c
index 394502a..e3f74bf 100644
--- a/drivers/usb/gadget/f_obex.c
+++ b/drivers/usb/gadget/f_obex.c
@@ -10,15 +10,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c
index 8f3eab1..3490770 100644
--- a/drivers/usb/gadget/f_phonet.c
+++ b/drivers/usb/gadget/f_phonet.c
@@ -8,16 +8,6 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
  */
 
 #include <linux/mm.h>
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 3ea4666..704d1d9 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -11,15 +11,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c
index e18b4f5..168906d 100644
--- a/drivers/usb/gadget/f_sourcesink.c
+++ b/drivers/usb/gadget/f_sourcesink.c
@@ -8,15 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c
index 3dc5375..c154064 100644
--- a/drivers/usb/gadget/f_subset.c
+++ b/drivers/usb/gadget/f_subset.c
@@ -8,15 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/slab.h>
diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c
index 7a8b9aa..2022fe49 100644
--- a/drivers/usb/gadget/f_uvc.c
+++ b/drivers/usb/gadget/f_uvc.c
@@ -8,7 +8,6 @@
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/f_uvc.h b/drivers/usb/gadget/f_uvc.h
index e18a663..abf8329 100644
--- a/drivers/usb/gadget/f_uvc.h
+++ b/drivers/usb/gadget/f_uvc.h
@@ -8,7 +8,6 @@
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
- *
  */
 
 #ifndef _F_UVC_H_
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 639e14a..3ac4f51 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -69,8 +69,7 @@
  * each LUN would be settable independently as a disk drive or a CD-ROM
  * drive, but currently all LUNs have to be the same type.  The CD-ROM
  * emulation includes a single data track and no audio tracks; hence there
- * need be only one backing file per LUN.  Note also that the CD-ROM block
- * length is set to 512 rather than the more common value 2048.
+ * need be only one backing file per LUN.
  *
  * Requirements are modest; only a bulk-in and a bulk-out endpoint are
  * needed (an interrupt-out endpoint is also needed for CBI).  The memory
@@ -461,7 +460,6 @@ struct fsg_dev {
 
 	struct fsg_buffhd	*next_buffhd_to_fill;
 	struct fsg_buffhd	*next_buffhd_to_drain;
-	struct fsg_buffhd	buffhds[FSG_NUM_BUFFERS];
 
 	int			thread_wakeup_needed;
 	struct completion	thread_notifier;
@@ -488,6 +486,8 @@ struct fsg_dev {
 	unsigned int		nluns;
 	struct fsg_lun		*luns;
 	struct fsg_lun		*curlun;
+	/* Must be the last entry */
+	struct fsg_buffhd	buffhds[];
 };
 
 typedef void (*fsg_routine_t)(struct fsg_dev *);
@@ -586,7 +586,19 @@ dev_qualifier = {
 	.bNumConfigurations =	1,
 };
 
+static int populate_bos(struct fsg_dev *fsg, u8 *buf)
+{
+	memcpy(buf, &fsg_bos_desc, USB_DT_BOS_SIZE);
+	buf += USB_DT_BOS_SIZE;
+
+	memcpy(buf, &fsg_ext_cap_desc, USB_DT_USB_EXT_CAP_SIZE);
+	buf += USB_DT_USB_EXT_CAP_SIZE;
 
+	memcpy(buf, &fsg_ss_cap_desc, USB_DT_USB_SS_CAP_SIZE);
+
+	return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE
+		+ USB_DT_USB_EXT_CAP_SIZE;
+}
 
 /*
  * Config descriptors must agree with the code that sets configurations
@@ -935,7 +947,8 @@ static int standard_setup_req(struct fsg_dev *fsg,
 			break;
 		case USB_DT_DEVICE_QUALIFIER:
 			VDBG(fsg, "get device qualifier\n");
-			if (!gadget_is_dualspeed(fsg->gadget))
+			if (!gadget_is_dualspeed(fsg->gadget) ||
+					fsg->gadget->speed == USB_SPEED_SUPER)
 				break;
 			/*
 			 * Assume ep0 uses the same maxpacket value for both
@@ -948,7 +961,8 @@ static int standard_setup_req(struct fsg_dev *fsg,
 
 		case USB_DT_OTHER_SPEED_CONFIG:
 			VDBG(fsg, "get other-speed config descriptor\n");
-			if (!gadget_is_dualspeed(fsg->gadget))
+			if (!gadget_is_dualspeed(fsg->gadget) ||
+					fsg->gadget->speed == USB_SPEED_SUPER)
 				break;
 			goto get_config;
 		case USB_DT_CONFIG:
@@ -967,7 +981,15 @@ get_config:
 			value = usb_gadget_get_string(&fsg_stringtab,
 					w_value & 0xff, req->buf);
 			break;
+
+		case USB_DT_BOS:
+			VDBG(fsg, "get bos descriptor\n");
+
+			if (gadget_is_superspeed(fsg->gadget))
+				value = populate_bos(fsg, req->buf);
+			break;
 		}
+
 		break;
 
 	/* One config, two speeds */
@@ -1136,7 +1158,6 @@ static int do_read(struct fsg_dev *fsg)
 	u32			amount_left;
 	loff_t			file_offset, file_offset_tmp;
 	unsigned int		amount;
-	unsigned int		partial_page;
 	ssize_t			nread;
 
 	/* Get the starting Logical Block Address and check that it's
@@ -1158,7 +1179,7 @@ static int do_read(struct fsg_dev *fsg)
 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
 		return -EINVAL;
 	}
-	file_offset = ((loff_t) lba) << 9;
+	file_offset = ((loff_t) lba) << curlun->blkbits;
 
 	/* Carry out the file reads */
 	amount_left = fsg->data_size_from_cmnd;
@@ -1171,17 +1192,10 @@ static int do_read(struct fsg_dev *fsg)
 		 * Try to read the remaining amount.
 		 * But don't read more than the buffer size.
 		 * And don't try to read past the end of the file.
-		 * Finally, if we're not at a page boundary, don't read past
-		 *	the next page.
-		 * If this means reading 0 then we were asked to read past
-		 *	the end of file. */
+		 */
 		amount = min((unsigned int) amount_left, mod_data.buflen);
 		amount = min((loff_t) amount,
 				curlun->file_length - file_offset);
-		partial_page = file_offset & (PAGE_CACHE_SIZE - 1);
-		if (partial_page > 0)
-			amount = min(amount, (unsigned int) PAGE_CACHE_SIZE -
-					partial_page);
 
 		/* Wait for the next buffer to become available */
 		bh = fsg->next_buffhd_to_fill;
@@ -1196,7 +1210,7 @@ static int do_read(struct fsg_dev *fsg)
 		if (amount == 0) {
 			curlun->sense_data =
 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-			curlun->sense_data_info = file_offset >> 9;
+			curlun->sense_data_info = file_offset >> curlun->blkbits;
 			curlun->info_valid = 1;
 			bh->inreq->length = 0;
 			bh->state = BUF_STATE_FULL;
@@ -1221,18 +1235,23 @@ static int do_read(struct fsg_dev *fsg)
 		} else if (nread < amount) {
 			LDBG(curlun, "partial file read: %d/%u\n",
 					(int) nread, amount);
-			nread -= (nread & 511);	// Round down to a block
+			nread = round_down(nread, curlun->blksize);
 		}
 		file_offset  += nread;
 		amount_left  -= nread;
 		fsg->residue -= nread;
+
+		/* Except at the end of the transfer, nread will be
+		 * equal to the buffer size, which is divisible by the
+		 * bulk-in maxpacket size.
+		 */
 		bh->inreq->length = nread;
 		bh->state = BUF_STATE_FULL;
 
 		/* If an error occurred, report it and its position */
 		if (nread < amount) {
 			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
-			curlun->sense_data_info = file_offset >> 9;
+			curlun->sense_data_info = file_offset >> curlun->blkbits;
 			curlun->info_valid = 1;
 			break;
 		}
@@ -1262,7 +1281,6 @@ static int do_write(struct fsg_dev *fsg)
 	u32			amount_left_to_req, amount_left_to_write;
 	loff_t			usb_offset, file_offset, file_offset_tmp;
 	unsigned int		amount;
-	unsigned int		partial_page;
 	ssize_t			nwritten;
 	int			rc;
 
@@ -1303,7 +1321,7 @@ static int do_write(struct fsg_dev *fsg)
 
 	/* Carry out the file writes */
 	get_some_more = 1;
-	file_offset = usb_offset = ((loff_t) lba) << 9;
+	file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
 	amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd;
 
 	while (amount_left_to_write > 0) {
@@ -1313,38 +1331,20 @@ static int do_write(struct fsg_dev *fsg)
 		if (bh->state == BUF_STATE_EMPTY && get_some_more) {
 
 			/* Figure out how much we want to get:
-			 * Try to get the remaining amount.
-			 * But don't get more than the buffer size.
-			 * And don't try to go past the end of the file.
-			 * If we're not at a page boundary,
-			 *	don't go past the next page.
-			 * If this means getting 0, then we were asked
-			 *	to write past the end of file.
-			 * Finally, round down to a block boundary. */
+			 * Try to get the remaining amount,
+			 * but not more than the buffer size.
+			 */
 			amount = min(amount_left_to_req, mod_data.buflen);
-			amount = min((loff_t) amount, curlun->file_length -
-					usb_offset);
-			partial_page = usb_offset & (PAGE_CACHE_SIZE - 1);
-			if (partial_page > 0)
-				amount = min(amount,
-	(unsigned int) PAGE_CACHE_SIZE - partial_page);
-
-			if (amount == 0) {
+
+			/* Beyond the end of the backing file? */
+			if (usb_offset >= curlun->file_length) {
 				get_some_more = 0;
 				curlun->sense_data =
 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-				curlun->sense_data_info = usb_offset >> 9;
+				curlun->sense_data_info = usb_offset >> curlun->blkbits;
 				curlun->info_valid = 1;
 				continue;
 			}
-			amount -= (amount & 511);
-			if (amount == 0) {
-
-				/* Why were we were asked to transfer a
-				 * partial block? */
-				get_some_more = 0;
-				continue;
-			}
 
 			/* Get the next buffer */
 			usb_offset += amount;
@@ -1353,11 +1353,11 @@ static int do_write(struct fsg_dev *fsg)
 			if (amount_left_to_req == 0)
 				get_some_more = 0;
 
-			/* amount is always divisible by 512, hence by
-			 * the bulk-out maxpacket size */
-			bh->outreq->length = bh->bulk_out_intended_length =
-					amount;
-			bh->outreq->short_not_ok = 1;
+			/* Except at the end of the transfer, amount will be
+			 * equal to the buffer size, which is divisible by
+			 * the bulk-out maxpacket size.
+			 */
+			set_bulk_out_req_length(fsg, bh, amount);
 			start_transfer(fsg, fsg->bulk_out, bh->outreq,
 					&bh->outreq_busy, &bh->state);
 			fsg->next_buffhd_to_fill = bh->next;
@@ -1376,7 +1376,7 @@ static int do_write(struct fsg_dev *fsg)
 			/* Did something go wrong with the transfer? */
 			if (bh->outreq->status != 0) {
 				curlun->sense_data = SS_COMMUNICATION_FAILURE;
-				curlun->sense_data_info = file_offset >> 9;
+				curlun->sense_data_info = file_offset >> curlun->blkbits;
 				curlun->info_valid = 1;
 				break;
 			}
@@ -1390,6 +1390,16 @@ static int do_write(struct fsg_dev *fsg)
 				amount = curlun->file_length - file_offset;
 			}
 
+			/* Don't accept excess data.  The spec doesn't say
+			 * what to do in this case.  We'll ignore the error.
+			 */
+			amount = min(amount, bh->bulk_out_intended_length);
+
+			/* Don't write a partial block */
+			amount = round_down(amount, curlun->blksize);
+			if (amount == 0)
+				goto empty_write;
+
 			/* Perform the write */
 			file_offset_tmp = file_offset;
 			nwritten = vfs_write(curlun->filp,
@@ -1408,8 +1418,7 @@ static int do_write(struct fsg_dev *fsg)
 			} else if (nwritten < amount) {
 				LDBG(curlun, "partial file write: %d/%u\n",
 						(int) nwritten, amount);
-				nwritten -= (nwritten & 511);
-						// Round down to a block
+				nwritten = round_down(nwritten, curlun->blksize);
 			}
 			file_offset += nwritten;
 			amount_left_to_write -= nwritten;
@@ -1418,13 +1427,14 @@ static int do_write(struct fsg_dev *fsg)
 			/* If an error occurred, report it and its position */
 			if (nwritten < amount) {
 				curlun->sense_data = SS_WRITE_ERROR;
-				curlun->sense_data_info = file_offset >> 9;
+				curlun->sense_data_info = file_offset >> curlun->blkbits;
 				curlun->info_valid = 1;
 				break;
 			}
 
+ empty_write:
 			/* Did the host decide to stop early? */
-			if (bh->outreq->actual != bh->outreq->length) {
+			if (bh->outreq->actual < bh->bulk_out_intended_length) {
 				fsg->short_packet_received = 1;
 				break;
 			}
@@ -1500,8 +1510,8 @@ static int do_verify(struct fsg_dev *fsg)
 		return -EIO;		// No default reply
 
 	/* Prepare to carry out the file verify */
-	amount_left = verification_length << 9;
-	file_offset = ((loff_t) lba) << 9;
+	amount_left = verification_length << curlun->blkbits;
+	file_offset = ((loff_t) lba) << curlun->blkbits;
 
 	/* Write out all the dirty buffers before invalidating them */
 	fsg_lun_fsync_sub(curlun);
@@ -1519,15 +1529,14 @@ static int do_verify(struct fsg_dev *fsg)
 		 * Try to read the remaining amount, but not more than
 		 * the buffer size.
 		 * And don't try to read past the end of the file.
-		 * If this means reading 0 then we were asked to read
-		 * past the end of file. */
+		 */
 		amount = min((unsigned int) amount_left, mod_data.buflen);
 		amount = min((loff_t) amount,
 				curlun->file_length - file_offset);
 		if (amount == 0) {
 			curlun->sense_data =
 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-			curlun->sense_data_info = file_offset >> 9;
+			curlun->sense_data_info = file_offset >> curlun->blkbits;
 			curlun->info_valid = 1;
 			break;
 		}
@@ -1550,11 +1559,11 @@ static int do_verify(struct fsg_dev *fsg)
 		} else if (nread < amount) {
 			LDBG(curlun, "partial file verify: %d/%u\n",
 					(int) nread, amount);
-			nread -= (nread & 511);	// Round down to a sector
+			nread = round_down(nread, curlun->blksize);
 		}
 		if (nread == 0) {
 			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
-			curlun->sense_data_info = file_offset >> 9;
+			curlun->sense_data_info = file_offset >> curlun->blkbits;
 			curlun->info_valid = 1;
 			break;
 		}
@@ -1668,7 +1677,7 @@ static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 
 	put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
 						/* Max logical block */
-	put_unaligned_be32(512, &buf[4]);	/* Block length */
+	put_unaligned_be32(curlun->blksize, &buf[4]);	/* Block length */
 	return 8;
 }
 
@@ -1890,7 +1899,7 @@ static int do_read_format_capacities(struct fsg_dev *fsg,
 
 	put_unaligned_be32(curlun->num_sectors, &buf[0]);
 						/* Number of blocks */
-	put_unaligned_be32(512, &buf[4]);	/* Block length */
+	put_unaligned_be32(curlun->blksize, &buf[4]);	/* Block length */
 	buf[4] = 0x02;				/* Current capacity */
 	return 12;
 }
@@ -1969,7 +1978,7 @@ static int throw_away_data(struct fsg_dev *fsg)
 			fsg->next_buffhd_to_drain = bh->next;
 
 			/* A short packet or an error ends everything */
-			if (bh->outreq->actual != bh->outreq->length ||
+			if (bh->outreq->actual < bh->bulk_out_intended_length ||
 					bh->outreq->status != 0) {
 				raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
 				return -EINTR;
@@ -1983,11 +1992,11 @@ static int throw_away_data(struct fsg_dev *fsg)
 			amount = min(fsg->usb_amount_left,
 					(u32) mod_data.buflen);
 
-			/* amount is always divisible by 512, hence by
-			 * the bulk-out maxpacket size */
-			bh->outreq->length = bh->bulk_out_intended_length =
-					amount;
-			bh->outreq->short_not_ok = 1;
+			/* Except at the end of the transfer, amount will be
+			 * equal to the buffer size, which is divisible by
+			 * the bulk-out maxpacket size.
+			 */
+			set_bulk_out_req_length(fsg, bh, amount);
 			start_transfer(fsg, fsg->bulk_out, bh->outreq,
 					&bh->outreq_busy, &bh->state);
 			fsg->next_buffhd_to_fill = bh->next;
@@ -2415,7 +2424,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
 
 	case READ_6:
 		i = fsg->cmnd[4];
-		fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << 9;
+		fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << fsg->curlun->blkbits;
 		if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
 				(7<<1) | (1<<4), 1,
 				"READ(6)")) == 0)
@@ -2424,7 +2433,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
 
 	case READ_10:
 		fsg->data_size_from_cmnd =
-				get_unaligned_be16(&fsg->cmnd[7]) << 9;
+				get_unaligned_be16(&fsg->cmnd[7]) << fsg->curlun->blkbits;
 		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
 				(1<<1) | (0xf<<2) | (3<<7), 1,
 				"READ(10)")) == 0)
@@ -2433,7 +2442,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
 
 	case READ_12:
 		fsg->data_size_from_cmnd =
-				get_unaligned_be32(&fsg->cmnd[6]) << 9;
+				get_unaligned_be32(&fsg->cmnd[6]) << fsg->curlun->blkbits;
 		if ((reply = check_command(fsg, 12, DATA_DIR_TO_HOST,
 				(1<<1) | (0xf<<2) | (0xf<<6), 1,
 				"READ(12)")) == 0)
@@ -2519,7 +2528,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
 
 	case WRITE_6:
 		i = fsg->cmnd[4];
-		fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << 9;
+		fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << fsg->curlun->blkbits;
 		if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST,
 				(7<<1) | (1<<4), 1,
 				"WRITE(6)")) == 0)
@@ -2528,7 +2537,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
 
 	case WRITE_10:
 		fsg->data_size_from_cmnd =
-				get_unaligned_be16(&fsg->cmnd[7]) << 9;
+				get_unaligned_be16(&fsg->cmnd[7]) << fsg->curlun->blkbits;
 		if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
 				(1<<1) | (0xf<<2) | (3<<7), 1,
 				"WRITE(10)")) == 0)
@@ -2537,7 +2546,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
 
 	case WRITE_12:
 		fsg->data_size_from_cmnd =
-				get_unaligned_be32(&fsg->cmnd[6]) << 9;
+				get_unaligned_be32(&fsg->cmnd[6]) << fsg->curlun->blkbits;
 		if ((reply = check_command(fsg, 12, DATA_DIR_FROM_HOST,
 				(1<<1) | (0xf<<2) | (0xf<<6), 1,
 				"WRITE(12)")) == 0)
@@ -2666,7 +2675,6 @@ static int get_next_command(struct fsg_dev *fsg)
 
 		/* Queue a request to read a Bulk-only CBW */
 		set_bulk_out_req_length(fsg, bh, USB_BULK_CB_WRAP_LEN);
-		bh->outreq->short_not_ok = 1;
 		start_transfer(fsg, fsg->bulk_out, bh->outreq,
 				&bh->outreq_busy, &bh->state);
 
@@ -2752,7 +2760,7 @@ static int do_set_interface(struct fsg_dev *fsg, int altsetting)
 
 reset:
 	/* Deallocate the requests */
-	for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+	for (i = 0; i < fsg_num_buffers; ++i) {
 		struct fsg_buffhd *bh = &fsg->buffhds[i];
 
 		if (bh->inreq) {
@@ -2791,29 +2799,32 @@ reset:
 
 	/* Enable the endpoints */
 	d = fsg_ep_desc(fsg->gadget,
-			&fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc);
+			&fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc,
+			&fsg_ss_bulk_in_desc);
 	if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0)
 		goto reset;
 	fsg->bulk_in_enabled = 1;
 
 	d = fsg_ep_desc(fsg->gadget,
-			&fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc);
+			&fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc,
+			&fsg_ss_bulk_out_desc);
 	if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0)
 		goto reset;
 	fsg->bulk_out_enabled = 1;
-	fsg->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize);
+	fsg->bulk_out_maxpacket = usb_endpoint_maxp(d);
 	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
 
 	if (transport_is_cbi()) {
 		d = fsg_ep_desc(fsg->gadget,
-				&fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc);
+				&fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc,
+				&fsg_ss_intr_in_desc);
 		if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0)
 			goto reset;
 		fsg->intr_in_enabled = 1;
 	}
 
 	/* Allocate the requests */
-	for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+	for (i = 0; i < fsg_num_buffers; ++i) {
 		struct fsg_buffhd	*bh = &fsg->buffhds[i];
 
 		if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0)
@@ -2862,17 +2873,10 @@ static int do_set_config(struct fsg_dev *fsg, u8 new_config)
 		fsg->config = new_config;
 		if ((rc = do_set_interface(fsg, 0)) != 0)
 			fsg->config = 0;	// Reset on errors
-		else {
-			char *speed;
-
-			switch (fsg->gadget->speed) {
-			case USB_SPEED_LOW:	speed = "low";	break;
-			case USB_SPEED_FULL:	speed = "full";	break;
-			case USB_SPEED_HIGH:	speed = "high";	break;
-			default: 		speed = "?";	break;
-			}
-			INFO(fsg, "%s speed config #%d\n", speed, fsg->config);
-		}
+		else
+			INFO(fsg, "%s config #%d\n",
+			     usb_speed_string(fsg->gadget->speed),
+			     fsg->config);
 	}
 	return rc;
 }
@@ -2909,7 +2913,7 @@ static void handle_exception(struct fsg_dev *fsg)
 	/* Cancel all the pending transfers */
 	if (fsg->intreq_busy)
 		usb_ep_dequeue(fsg->intr_in, fsg->intreq);
-	for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+	for (i = 0; i < fsg_num_buffers; ++i) {
 		bh = &fsg->buffhds[i];
 		if (bh->inreq_busy)
 			usb_ep_dequeue(fsg->bulk_in, bh->inreq);
@@ -2920,7 +2924,7 @@ static void handle_exception(struct fsg_dev *fsg)
 	/* Wait until everything is idle */
 	for (;;) {
 		num_active = fsg->intreq_busy;
-		for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+		for (i = 0; i < fsg_num_buffers; ++i) {
 			bh = &fsg->buffhds[i];
 			num_active += bh->inreq_busy + bh->outreq_busy;
 		}
@@ -2942,7 +2946,7 @@ static void handle_exception(struct fsg_dev *fsg)
 	 * state, and the exception.  Then invoke the handler. */
 	spin_lock_irq(&fsg->lock);
 
-	for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+	for (i = 0; i < fsg_num_buffers; ++i) {
 		bh = &fsg->buffhds[i];
 		bh->state = BUF_STATE_EMPTY;
 	}
@@ -3149,6 +3153,15 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
 	DBG(fsg, "unbind\n");
 	clear_bit(REGISTERED, &fsg->atomic_bitflags);
 
+	/* If the thread isn't already dead, tell it to exit now */
+	if (fsg->state != FSG_STATE_TERMINATED) {
+		raise_exception(fsg, FSG_STATE_EXIT);
+		wait_for_completion(&fsg->thread_notifier);
+
+		/* The cleanup routine waits for this completion also */
+		complete(&fsg->thread_notifier);
+	}
+
 	/* Unregister the sysfs attribute files and the LUNs */
 	for (i = 0; i < fsg->nluns; ++i) {
 		curlun = &fsg->luns[i];
@@ -3162,17 +3175,8 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
 		}
 	}
 
-	/* If the thread isn't already dead, tell it to exit now */
-	if (fsg->state != FSG_STATE_TERMINATED) {
-		raise_exception(fsg, FSG_STATE_EXIT);
-		wait_for_completion(&fsg->thread_notifier);
-
-		/* The cleanup routine waits for this completion also */
-		complete(&fsg->thread_notifier);
-	}
-
 	/* Free the data buffers */
-	for (i = 0; i < FSG_NUM_BUFFERS; ++i)
+	for (i = 0; i < fsg_num_buffers; ++i)
 		kfree(fsg->buffhds[i].buf);
 
 	/* Free the request and buffer for endpoint 0 */
@@ -3445,6 +3449,24 @@ static int __init fsg_bind(struct usb_gadget *gadget)
 			fsg_fs_intr_in_desc.bEndpointAddress;
 	}
 
+	if (gadget_is_superspeed(gadget)) {
+		unsigned		max_burst;
+
+		fsg_ss_function[i + FSG_SS_FUNCTION_PRE_EP_ENTRIES] = NULL;
+
+		/* Calculate bMaxBurst, we know packet size is 1024 */
+		max_burst = min_t(unsigned, mod_data.buflen / 1024, 15);
+
+		/* Assume endpoint addresses are the same for both speeds */
+		fsg_ss_bulk_in_desc.bEndpointAddress =
+			fsg_fs_bulk_in_desc.bEndpointAddress;
+		fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
+
+		fsg_ss_bulk_out_desc.bEndpointAddress =
+			fsg_fs_bulk_out_desc.bEndpointAddress;
+		fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
+	}
+
 	if (gadget_is_otg(gadget))
 		fsg_otg_desc.bmAttributes |= USB_OTG_HNP;
 
@@ -3460,7 +3482,7 @@ static int __init fsg_bind(struct usb_gadget *gadget)
 	req->complete = ep0_complete;
 
 	/* Allocate the data buffers */
-	for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+	for (i = 0; i < fsg_num_buffers; ++i) {
 		struct fsg_buffhd	*bh = &fsg->buffhds[i];
 
 		/* Allocate for the bulk-in endpoint.  We assume that
@@ -3471,7 +3493,7 @@ static int __init fsg_bind(struct usb_gadget *gadget)
 			goto out;
 		bh->next = bh + 1;
 	}
-	fsg->buffhds[FSG_NUM_BUFFERS - 1].next = &fsg->buffhds[0];
+	fsg->buffhds[fsg_num_buffers - 1].next = &fsg->buffhds[0];
 
 	/* This should reflect the actual gadget power source */
 	usb_gadget_set_selfpowered(gadget);
@@ -3561,11 +3583,7 @@ static void fsg_resume(struct usb_gadget *gadget)
 /*-------------------------------------------------------------------------*/
 
 static struct usb_gadget_driver		fsg_driver = {
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-	.speed		= USB_SPEED_HIGH,
-#else
-	.speed		= USB_SPEED_FULL,
-#endif
+	.speed		= USB_SPEED_SUPER,
 	.function	= (char *) fsg_string_product,
 	.unbind		= fsg_unbind,
 	.disconnect	= fsg_disconnect,
@@ -3587,7 +3605,9 @@ static int __init fsg_alloc(void)
 {
 	struct fsg_dev		*fsg;
 
-	fsg = kzalloc(sizeof *fsg, GFP_KERNEL);
+	fsg = kzalloc(sizeof *fsg +
+		      fsg_num_buffers * sizeof *(fsg->buffhds), GFP_KERNEL);
+
 	if (!fsg)
 		return -ENOMEM;
 	spin_lock_init(&fsg->lock);
@@ -3605,6 +3625,10 @@ static int __init fsg_init(void)
 	int		rc;
 	struct fsg_dev	*fsg;
 
+	rc = fsg_num_buffers_validate();
+	if (rc != 0)
+		return rc;
+
 	if ((rc = fsg_alloc()) != 0)
 		return rc;
 	fsg = the_fsg;
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index 3bf872e..2a03e4d 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -540,7 +540,7 @@ static int qe_ep_init(struct qe_udc *udc,
 	int reval = 0;
 	u16 max = 0;
 
-	max = le16_to_cpu(desc->wMaxPacketSize);
+	max = usb_endpoint_maxp(desc);
 
 	/* check the max package size validate for this endpoint */
 	/* Refer to USB2.0 spec table 9-13,
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index de24a42..b2c44e1 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -559,7 +559,7 @@ static int fsl_ep_enable(struct usb_ep *_ep,
 	if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN))
 		return -ESHUTDOWN;
 
-	max = le16_to_cpu(desc->wMaxPacketSize);
+	max = usb_endpoint_maxp(desc);
 
 	/* Disable automatic zlp generation.  Driver is responsible to indicate
 	 * explicitly through req->req.zero.  This is needed to enable multi-td
@@ -1715,34 +1715,31 @@ static void dtd_complete_irq(struct fsl_udc *udc)
 	}
 }
 
+static inline enum usb_device_speed portscx_device_speed(u32 reg)
+{
+	switch (speed & PORTSCX_PORT_SPEED_MASK) {
+	case PORTSCX_PORT_SPEED_HIGH:
+		return USB_SPEED_HIGH;
+	case PORTSCX_PORT_SPEED_FULL:
+		return USB_SPEED_FULL;
+	case PORTSCX_PORT_SPEED_LOW:
+		return USB_SPEED_LOW;
+	default:
+		return USB_SPEED_UNKNOWN;
+	}
+}
+
 /* Process a port change interrupt */
 static void port_change_irq(struct fsl_udc *udc)
 {
-	u32 speed;
-
 	if (udc->bus_reset)
 		udc->bus_reset = 0;
 
 	/* Bus resetting is finished */
-	if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET)) {
+	if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET))
 		/* Get the speed */
-		speed = (fsl_readl(&dr_regs->portsc1)
-				& PORTSCX_PORT_SPEED_MASK);
-		switch (speed) {
-		case PORTSCX_PORT_SPEED_HIGH:
-			udc->gadget.speed = USB_SPEED_HIGH;
-			break;
-		case PORTSCX_PORT_SPEED_FULL:
-			udc->gadget.speed = USB_SPEED_FULL;
-			break;
-		case PORTSCX_PORT_SPEED_LOW:
-			udc->gadget.speed = USB_SPEED_LOW;
-			break;
-		default:
-			udc->gadget.speed = USB_SPEED_UNKNOWN;
-			break;
-		}
-	}
+		udc->gadget.speed =
+			portscx_device_speed(fsl_readl(&dr_regs->portsc1));
 
 	/* Update USB state */
 	if (!udc->resume_state)
@@ -2167,20 +2164,8 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count,
 			default:
 				s = "None"; break;
 			}
-			s;} ), ( {
-			char *s;
-			switch (tmp_reg & PORTSCX_PORT_SPEED_UNDEF) {
-			case PORTSCX_PORT_SPEED_FULL:
-				s = "Full Speed"; break;
-			case PORTSCX_PORT_SPEED_LOW:
-				s = "Low Speed"; break;
-			case PORTSCX_PORT_SPEED_HIGH:
-				s = "High Speed"; break;
-			default:
-				s = "Undefined"; break;
-			}
-			s;
-		} ),
+			s;} ),
+		usb_speed_string(portscx_device_speed(tmp_reg)),
 		(tmp_reg & PORTSCX_PHY_LOW_POWER_SPD) ?
 		"Normal PHY mode" : "Low power mode",
 		(tmp_reg & PORTSCX_PORT_RESET) ? "In Reset" :
diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c
index 4ec888f..e593f28 100644
--- a/drivers/usb/gadget/fusb300_udc.c
+++ b/drivers/usb/gadget/fusb300_udc.c
@@ -8,16 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
@@ -220,7 +210,7 @@ static int config_ep(struct fusb300_ep *ep,
 
 	info.type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
 	info.dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0;
-	info.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	info.maxpacket = usb_endpoint_maxp(desc);
 	info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
 
 	if ((info.type == USB_ENDPOINT_XFER_INT) ||
@@ -1479,7 +1469,7 @@ static int __init fusb300_probe(struct platform_device *pdev)
 	fusb300->gadget.name = udc_name;
 	fusb300->reg = reg;
 
-	ret = request_irq(ires->start, fusb300_irq, IRQF_DISABLED | IRQF_SHARED,
+	ret = request_irq(ires->start, fusb300_irq, IRQF_SHARED,
 			  udc_name, fusb300);
 	if (ret < 0) {
 		pr_err("request_irq error (%d)\n", ret);
@@ -1487,7 +1477,7 @@ static int __init fusb300_probe(struct platform_device *pdev)
 	}
 
 	ret = request_irq(ires1->start, fusb300_irq,
-			IRQF_DISABLED | IRQF_SHARED, udc_name, fusb300);
+			IRQF_SHARED, udc_name, fusb300);
 	if (ret < 0) {
 		pr_err("request_irq1 error (%d)\n", ret);
 		goto clean_up;
diff --git a/drivers/usb/gadget/fusb300_udc.h b/drivers/usb/gadget/fusb300_udc.h
index f51aa2e..92745bd 100644
--- a/drivers/usb/gadget/fusb300_udc.h
+++ b/drivers/usb/gadget/fusb300_udc.h
@@ -8,16 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 
 
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index 704c280..0519d77 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -8,15 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #define pr_fmt(fmt) "g_ffs: " fmt
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index f3a83cd..a8855d0 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -31,6 +31,7 @@
 #define gadget_is_ci13xxx_msm(g)	(!strcmp("ci13xxx_msm", (g)->name))
 #define gadget_is_ci13xxx_pci(g)	(!strcmp("ci13xxx_pci", (g)->name))
 #define gadget_is_dummy(g)		(!strcmp("dummy_udc", (g)->name))
+#define gadget_is_dwc3(g)		(!strcmp("dwc3-gadget", (g)->name))
 #define gadget_is_fsl_qe(g)		(!strcmp("fsl_qe_udc", (g)->name))
 #define gadget_is_fsl_usb2(g)		(!strcmp("fsl-usb2-udc", (g)->name))
 #define gadget_is_goku(g)		(!strcmp("goku_udc", (g)->name))
@@ -115,6 +116,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
 		return 0x30;
 	else if (gadget_is_net2272(gadget))
 		return 0x31;
+	else if (gadget_is_dwc3(gadget))
+		return 0x32;
 
 	return -ENOENT;
 }
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 8b9220e..8fcde37 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -36,134 +36,43 @@
 
 #include "gadget_chips.h"
 
-
-/*
- * Kbuild is not very cooperative with respect to linking separately
- * compiled library objects into one module.  So for now we won't use
- * separate compilation ... ensuring init/exit sections work to shrink
- * the runtime footprint, and giving us at least some parts of what
- * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
- */
+#include "composite.c"
 #include "usbstring.c"
 #include "config.c"
 #include "epautoconf.c"
+#include "f_midi.c"
 
 /*-------------------------------------------------------------------------*/
 
-
 MODULE_AUTHOR("Ben Williamson");
 MODULE_LICENSE("GPL v2");
 
-#define DRIVER_VERSION "25 Jul 2006"
-
 static const char shortname[] = "g_midi";
 static const char longname[] = "MIDI Gadget";
 
 static int index = SNDRV_DEFAULT_IDX1;
-static char *id = SNDRV_DEFAULT_STR1;
-
-module_param(index, int, 0444);
+module_param(index, int, S_IRUGO);
 MODULE_PARM_DESC(index, "Index value for the USB MIDI Gadget adapter.");
-module_param(id, charp, 0444);
-MODULE_PARM_DESC(id, "ID string for the USB MIDI Gadget adapter.");
-
-/* Some systems will want different product identifiers published in the
- * device descriptor, either numbers or strings or both.  These string
- * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
- */
-
-static ushort idVendor;
-module_param(idVendor, ushort, S_IRUGO);
-MODULE_PARM_DESC(idVendor, "USB Vendor ID");
-
-static ushort idProduct;
-module_param(idProduct, ushort, S_IRUGO);
-MODULE_PARM_DESC(idProduct, "USB Product ID");
-
-static ushort bcdDevice;
-module_param(bcdDevice, ushort, S_IRUGO);
-MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
-
-static char *iManufacturer;
-module_param(iManufacturer, charp, S_IRUGO);
-MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
-
-static char *iProduct;
-module_param(iProduct, charp, S_IRUGO);
-MODULE_PARM_DESC(iProduct, "USB Product string");
-
-static char *iSerialNumber;
-module_param(iSerialNumber, charp, S_IRUGO);
-MODULE_PARM_DESC(iSerialNumber, "SerialNumber");
-
-/*
- * this version autoconfigures as much as possible,
- * which is reasonable for most "bulk-only" drivers.
- */
-static const char *EP_IN_NAME;
-static const char *EP_OUT_NAME;
 
+static char *id = SNDRV_DEFAULT_STR1;
+module_param(id, charp, S_IRUGO);
+MODULE_PARM_DESC(id, "ID string for the USB MIDI Gadget adapter.");
 
-/* big enough to hold our biggest descriptor */
-#define USB_BUFSIZ 256
-
-
-/* This is a gadget, and the IN/OUT naming is from the host's perspective.
-   USB -> OUT endpoint -> rawmidi
-   USB <- IN endpoint  <- rawmidi */
-struct gmidi_in_port {
-	struct gmidi_device* dev;
-	int active;
-	uint8_t cable;		/* cable number << 4 */
-	uint8_t state;
-#define STATE_UNKNOWN	0
-#define STATE_1PARAM	1
-#define STATE_2PARAM_1	2
-#define STATE_2PARAM_2	3
-#define STATE_SYSEX_0	4
-#define STATE_SYSEX_1	5
-#define STATE_SYSEX_2	6
-	uint8_t data[2];
-};
-
-struct gmidi_device {
-	spinlock_t		lock;
-	struct usb_gadget	*gadget;
-	struct usb_request	*req;		/* for control responses */
-	u8			config;
-	struct usb_ep		*in_ep, *out_ep;
-	struct snd_card		*card;
-	struct snd_rawmidi	*rmidi;
-	struct snd_rawmidi_substream *in_substream;
-	struct snd_rawmidi_substream *out_substream;
-
-	/* For the moment we only support one port in
-	   each direction, but in_port is kept as a
-	   separate struct so we can have more later. */
-	struct gmidi_in_port	in_port;
-	unsigned long		out_triggered;
-	struct tasklet_struct	tasklet;
-};
-
-static void gmidi_transmit(struct gmidi_device* dev, struct usb_request* req);
-
-
-#define DBG(d, fmt, args...) \
-	dev_dbg(&(d)->gadget->dev , fmt , ## args)
-#define VDBG(d, fmt, args...) \
-	dev_vdbg(&(d)->gadget->dev , fmt , ## args)
-#define ERROR(d, fmt, args...) \
-	dev_err(&(d)->gadget->dev , fmt , ## args)
-#define INFO(d, fmt, args...) \
-	dev_info(&(d)->gadget->dev , fmt , ## args)
-
-
-static unsigned buflen = 256;
-static unsigned qlen = 32;
-
+static unsigned int buflen = 256;
 module_param(buflen, uint, S_IRUGO);
+MODULE_PARM_DESC(buflen, "MIDI buffer length");
+
+static unsigned int qlen = 32;
 module_param(qlen, uint, S_IRUGO);
+MODULE_PARM_DESC(qlen, "USB read request queue length");
 
+static unsigned int in_ports = 1;
+module_param(in_ports, uint, S_IRUGO);
+MODULE_PARM_DESC(in_ports, "Number of MIDI input ports");
+
+static unsigned int out_ports = 1;
+module_param(out_ports, uint, S_IRUGO);
+MODULE_PARM_DESC(out_ports, "Number of MIDI output ports");
 
 /* Thanks to Grey Innovation for donating this product ID.
  *
@@ -173,1149 +82,124 @@ module_param(qlen, uint, S_IRUGO);
 #define DRIVER_VENDOR_NUM	0x17b3		/* Grey Innovation */
 #define DRIVER_PRODUCT_NUM	0x0004		/* Linux-USB "MIDI Gadget" */
 
+/* string IDs are assigned dynamically */
 
-/*
- * DESCRIPTORS ... most are static, but strings and (full)
- * configuration descriptors are built on demand.
- */
-
-#define STRING_MANUFACTURER	25
-#define STRING_PRODUCT		42
-#define STRING_SERIAL		101
-#define STRING_MIDI_GADGET	250
+#define STRING_MANUFACTURER_IDX		0
+#define STRING_PRODUCT_IDX		1
+#define STRING_DESCRIPTION_IDX		2
 
-/* We only have the one configuration, it's number 1. */
-#define	GMIDI_CONFIG		1
-
-/* We have two interfaces- AudioControl and MIDIStreaming */
-#define GMIDI_AC_INTERFACE	0
-#define GMIDI_MS_INTERFACE	1
-#define GMIDI_NUM_INTERFACES	2
-
-DECLARE_UAC_AC_HEADER_DESCRIPTOR(1);
-DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1);
-DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(1);
-
-/* B.1  Device Descriptor */
 static struct usb_device_descriptor device_desc = {
 	.bLength =		USB_DT_DEVICE_SIZE,
 	.bDescriptorType =	USB_DT_DEVICE,
-	.bcdUSB =		cpu_to_le16(0x0200),
+	.bcdUSB =		__constant_cpu_to_le16(0x0200),
 	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
-	.idVendor =		cpu_to_le16(DRIVER_VENDOR_NUM),
-	.idProduct =		cpu_to_le16(DRIVER_PRODUCT_NUM),
-	.iManufacturer =	STRING_MANUFACTURER,
-	.iProduct =		STRING_PRODUCT,
+	.idVendor =		__constant_cpu_to_le16(DRIVER_VENDOR_NUM),
+	.idProduct =		__constant_cpu_to_le16(DRIVER_PRODUCT_NUM),
+	/* .iManufacturer =	DYNAMIC */
+	/* .iProduct =		DYNAMIC */
 	.bNumConfigurations =	1,
 };
 
-/* B.2  Configuration Descriptor */
-static struct usb_config_descriptor config_desc = {
-	.bLength =		USB_DT_CONFIG_SIZE,
-	.bDescriptorType =	USB_DT_CONFIG,
-	/* compute wTotalLength on the fly */
-	.bNumInterfaces =	GMIDI_NUM_INTERFACES,
-	.bConfigurationValue =	GMIDI_CONFIG,
-	.iConfiguration =	STRING_MIDI_GADGET,
-	/*
-	 * FIXME: When embedding this driver in a device,
-	 * these need to be set to reflect the actual
-	 * power properties of the device. Is it selfpowered?
-	 */
-	.bmAttributes =		USB_CONFIG_ATT_ONE,
-	.bMaxPower =		CONFIG_USB_GADGET_VBUS_DRAW / 2,
-};
-
-/* B.3.1  Standard AC Interface Descriptor */
-static const struct usb_interface_descriptor ac_interface_desc = {
-	.bLength =		USB_DT_INTERFACE_SIZE,
-	.bDescriptorType =	USB_DT_INTERFACE,
-	.bInterfaceNumber =	GMIDI_AC_INTERFACE,
-	.bNumEndpoints =	0,
-	.bInterfaceClass =	USB_CLASS_AUDIO,
-	.bInterfaceSubClass =	USB_SUBCLASS_AUDIOCONTROL,
-	.iInterface =		STRING_MIDI_GADGET,
-};
-
-/* B.3.2  Class-Specific AC Interface Descriptor */
-static const struct uac1_ac_header_descriptor_1 ac_header_desc = {
-	.bLength =		UAC_DT_AC_HEADER_SIZE(1),
-	.bDescriptorType =	USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype =	USB_MS_HEADER,
-	.bcdADC =		cpu_to_le16(0x0100),
-	.wTotalLength =		cpu_to_le16(UAC_DT_AC_HEADER_SIZE(1)),
-	.bInCollection =	1,
-	.baInterfaceNr = {
-		[0] =		GMIDI_MS_INTERFACE,
-	}
-};
-
-/* B.4.1  Standard MS Interface Descriptor */
-static const struct usb_interface_descriptor ms_interface_desc = {
-	.bLength =		USB_DT_INTERFACE_SIZE,
-	.bDescriptorType =	USB_DT_INTERFACE,
-	.bInterfaceNumber =	GMIDI_MS_INTERFACE,
-	.bNumEndpoints =	2,
-	.bInterfaceClass =	USB_CLASS_AUDIO,
-	.bInterfaceSubClass =	USB_SUBCLASS_MIDISTREAMING,
-	.iInterface =		STRING_MIDI_GADGET,
+static struct usb_string strings_dev[] = {
+	[STRING_MANUFACTURER_IDX].s	= "Grey Innovation",
+	[STRING_PRODUCT_IDX].s		= "MIDI Gadget",
+	[STRING_DESCRIPTION_IDX].s	= "MIDI",
+	{  } /* end of list */
 };
 
-/* B.4.2  Class-Specific MS Interface Descriptor */
-static const struct usb_ms_header_descriptor ms_header_desc = {
-	.bLength =		USB_DT_MS_HEADER_SIZE,
-	.bDescriptorType =	USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype =	USB_MS_HEADER,
-	.bcdMSC =		cpu_to_le16(0x0100),
-	.wTotalLength =		cpu_to_le16(USB_DT_MS_HEADER_SIZE
-				+ 2*USB_DT_MIDI_IN_SIZE
-				+ 2*USB_DT_MIDI_OUT_SIZE(1)),
-};
-
-#define JACK_IN_EMB	1
-#define JACK_IN_EXT	2
-#define JACK_OUT_EMB	3
-#define JACK_OUT_EXT	4
-
-/* B.4.3  MIDI IN Jack Descriptors */
-static const struct usb_midi_in_jack_descriptor jack_in_emb_desc = {
-	.bLength =		USB_DT_MIDI_IN_SIZE,
-	.bDescriptorType =	USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype =	USB_MS_MIDI_IN_JACK,
-	.bJackType =		USB_MS_EMBEDDED,
-	.bJackID =		JACK_IN_EMB,
-};
-
-static const struct usb_midi_in_jack_descriptor jack_in_ext_desc = {
-	.bLength =		USB_DT_MIDI_IN_SIZE,
-	.bDescriptorType =	USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype =	USB_MS_MIDI_IN_JACK,
-	.bJackType =		USB_MS_EXTERNAL,
-	.bJackID =		JACK_IN_EXT,
-};
-
-/* B.4.4  MIDI OUT Jack Descriptors */
-static const struct usb_midi_out_jack_descriptor_1 jack_out_emb_desc = {
-	.bLength =		USB_DT_MIDI_OUT_SIZE(1),
-	.bDescriptorType =	USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype =	USB_MS_MIDI_OUT_JACK,
-	.bJackType =		USB_MS_EMBEDDED,
-	.bJackID =		JACK_OUT_EMB,
-	.bNrInputPins =		1,
-	.pins = {
-		[0] = {
-			.baSourceID =	JACK_IN_EXT,
-			.baSourcePin =	1,
-		}
-	}
-};
-
-static const struct usb_midi_out_jack_descriptor_1 jack_out_ext_desc = {
-	.bLength =		USB_DT_MIDI_OUT_SIZE(1),
-	.bDescriptorType =	USB_DT_CS_INTERFACE,
-	.bDescriptorSubtype =	USB_MS_MIDI_OUT_JACK,
-	.bJackType =		USB_MS_EXTERNAL,
-	.bJackID =		JACK_OUT_EXT,
-	.bNrInputPins =		1,
-	.pins = {
-		[0] = {
-			.baSourceID =	JACK_IN_EMB,
-			.baSourcePin =	1,
-		}
-	}
-};
-
-/* B.5.1  Standard Bulk OUT Endpoint Descriptor */
-static struct usb_endpoint_descriptor bulk_out_desc = {
-	.bLength =		USB_DT_ENDPOINT_AUDIO_SIZE,
-	.bDescriptorType =	USB_DT_ENDPOINT,
-	.bEndpointAddress =	USB_DIR_OUT,
-	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-};
-
-/* B.5.2  Class-specific MS Bulk OUT Endpoint Descriptor */
-static const struct usb_ms_endpoint_descriptor_1 ms_out_desc = {
-	.bLength =		USB_DT_MS_ENDPOINT_SIZE(1),
-	.bDescriptorType =	USB_DT_CS_ENDPOINT,
-	.bDescriptorSubtype =	USB_MS_GENERAL,
-	.bNumEmbMIDIJack =	1,
-	.baAssocJackID = {
-		[0] =		JACK_IN_EMB,
-	}
-};
-
-/* B.6.1  Standard Bulk IN Endpoint Descriptor */
-static struct usb_endpoint_descriptor bulk_in_desc = {
-	.bLength =		USB_DT_ENDPOINT_AUDIO_SIZE,
-	.bDescriptorType =	USB_DT_ENDPOINT,
-	.bEndpointAddress =	USB_DIR_IN,
-	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-};
-
-/* B.6.2  Class-specific MS Bulk IN Endpoint Descriptor */
-static const struct usb_ms_endpoint_descriptor_1 ms_in_desc = {
-	.bLength =		USB_DT_MS_ENDPOINT_SIZE(1),
-	.bDescriptorType =	USB_DT_CS_ENDPOINT,
-	.bDescriptorSubtype =	USB_MS_GENERAL,
-	.bNumEmbMIDIJack =	1,
-	.baAssocJackID = {
-		[0] =		JACK_OUT_EMB,
-	}
-};
-
-static const struct usb_descriptor_header *gmidi_function [] = {
-	(struct usb_descriptor_header *)&ac_interface_desc,
-	(struct usb_descriptor_header *)&ac_header_desc,
-	(struct usb_descriptor_header *)&ms_interface_desc,
-
-	(struct usb_descriptor_header *)&ms_header_desc,
-	(struct usb_descriptor_header *)&jack_in_emb_desc,
-	(struct usb_descriptor_header *)&jack_in_ext_desc,
-	(struct usb_descriptor_header *)&jack_out_emb_desc,
-	(struct usb_descriptor_header *)&jack_out_ext_desc,
-	/* If you add more jacks, update ms_header_desc.wTotalLength */
-
-	(struct usb_descriptor_header *)&bulk_out_desc,
-	(struct usb_descriptor_header *)&ms_out_desc,
-	(struct usb_descriptor_header *)&bulk_in_desc,
-	(struct usb_descriptor_header *)&ms_in_desc,
-	NULL,
-};
-
-static char manufacturer[50];
-static char product_desc[40] = "MIDI Gadget";
-static char serial_number[20];
-
-/* static strings, in UTF-8 */
-static struct usb_string strings [] = {
-	{ STRING_MANUFACTURER, manufacturer, },
-	{ STRING_PRODUCT, product_desc, },
-	{ STRING_SERIAL, serial_number, },
-	{ STRING_MIDI_GADGET, longname, },
-	{  }			/* end of list */
-};
-
-static struct usb_gadget_strings stringtab = {
+static struct usb_gadget_strings stringtab_dev = {
 	.language	= 0x0409,	/* en-us */
-	.strings	= strings,
+	.strings	= strings_dev,
 };
 
-static int config_buf(struct usb_gadget *gadget,
-		u8 *buf, u8 type, unsigned index)
-{
-	int len;
-
-	/* only one configuration */
-	if (index != 0) {
-		return -EINVAL;
-	}
-	len = usb_gadget_config_buf(&config_desc,
-			buf, USB_BUFSIZ, gmidi_function);
-	if (len < 0) {
-		return len;
-	}
-	((struct usb_config_descriptor *)buf)->bDescriptorType = type;
-	return len;
-}
-
-static struct usb_request *alloc_ep_req(struct usb_ep *ep, unsigned length)
-{
-	struct usb_request	*req;
-
-	req = usb_ep_alloc_request(ep, GFP_ATOMIC);
-	if (req) {
-		req->length = length;
-		req->buf = kmalloc(length, GFP_ATOMIC);
-		if (!req->buf) {
-			usb_ep_free_request(ep, req);
-			req = NULL;
-		}
-	}
-	return req;
-}
-
-static void free_ep_req(struct usb_ep *ep, struct usb_request *req)
-{
-	kfree(req->buf);
-	usb_ep_free_request(ep, req);
-}
-
-static const uint8_t gmidi_cin_length[] = {
-	0, 0, 2, 3, 3, 1, 2, 3, 3, 3, 3, 3, 2, 2, 3, 1
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
 };
 
-/*
- * Receives a chunk of MIDI data.
- */
-static void gmidi_read_data(struct usb_ep *ep, int cable,
-				   uint8_t *data, int length)
-{
-	struct gmidi_device *dev = ep->driver_data;
-	/* cable is ignored, because for now we only have one. */
-
-	if (!dev->out_substream) {
-		/* Nobody is listening - throw it on the floor. */
-		return;
-	}
-	if (!test_bit(dev->out_substream->number, &dev->out_triggered)) {
-		return;
-	}
-	snd_rawmidi_receive(dev->out_substream, data, length);
-}
-
-static void gmidi_handle_out_data(struct usb_ep *ep, struct usb_request *req)
-{
-	unsigned i;
-	u8 *buf = req->buf;
-
-	for (i = 0; i + 3 < req->actual; i += 4) {
-		if (buf[i] != 0) {
-			int cable = buf[i] >> 4;
-			int length = gmidi_cin_length[buf[i] & 0x0f];
-			gmidi_read_data(ep, cable, &buf[i + 1], length);
-		}
-	}
-}
-
-static void gmidi_complete(struct usb_ep *ep, struct usb_request *req)
-{
-	struct gmidi_device *dev = ep->driver_data;
-	int status = req->status;
-
-	switch (status) {
-	case 0:				/* normal completion */
-		if (ep == dev->out_ep) {
-			/* we received stuff.
-			   req is queued again, below */
-			gmidi_handle_out_data(ep, req);
-		} else if (ep == dev->in_ep) {
-			/* our transmit completed.
-			   see if there's more to go.
-			   gmidi_transmit eats req, don't queue it again. */
-			gmidi_transmit(dev, req);
-			return;
-		}
-		break;
-
-	/* this endpoint is normally active while we're configured */
-	case -ECONNABORTED:		/* hardware forced ep reset */
-	case -ECONNRESET:		/* request dequeued */
-	case -ESHUTDOWN:		/* disconnect from host */
-		VDBG(dev, "%s gone (%d), %d/%d\n", ep->name, status,
-				req->actual, req->length);
-		if (ep == dev->out_ep) {
-			gmidi_handle_out_data(ep, req);
-		}
-		free_ep_req(ep, req);
-		return;
-
-	case -EOVERFLOW:		/* buffer overrun on read means that
-					 * we didn't provide a big enough
-					 * buffer.
-					 */
-	default:
-		DBG(dev, "%s complete --> %d, %d/%d\n", ep->name,
-				status, req->actual, req->length);
-		break;
-	case -EREMOTEIO:		/* short read */
-		break;
-	}
-
-	status = usb_ep_queue(ep, req, GFP_ATOMIC);
-	if (status) {
-		ERROR(dev, "kill %s:  resubmit %d bytes --> %d\n",
-				ep->name, req->length, status);
-		usb_ep_set_halt(ep);
-		/* FIXME recover later ... somehow */
-	}
-}
-
-static int set_gmidi_config(struct gmidi_device *dev, gfp_t gfp_flags)
-{
-	int err = 0;
-	struct usb_request *req;
-	struct usb_ep *ep;
-	unsigned i;
-
-	dev->in_ep->desc = &bulk_in_desc;
-	err = usb_ep_enable(dev->in_ep);
-	if (err) {
-		ERROR(dev, "can't start %s: %d\n", dev->in_ep->name, err);
-		goto fail;
-	}
-	dev->in_ep->driver_data = dev;
-
-	dev->out_ep->desc = &bulk_out_desc;
-	err = usb_ep_enable(dev->out_ep);
-	if (err) {
-		ERROR(dev, "can't start %s: %d\n", dev->out_ep->name, err);
-		goto fail;
-	}
-	dev->out_ep->driver_data = dev;
-
-	/* allocate a bunch of read buffers and queue them all at once. */
-	ep = dev->out_ep;
-	for (i = 0; i < qlen && err == 0; i++) {
-		req = alloc_ep_req(ep, buflen);
-		if (req) {
-			req->complete = gmidi_complete;
-			err = usb_ep_queue(ep, req, GFP_ATOMIC);
-			if (err) {
-				DBG(dev, "%s queue req: %d\n", ep->name, err);
-			}
-		} else {
-			err = -ENOMEM;
-		}
-	}
-fail:
-	/* caller is responsible for cleanup on error */
-	return err;
-}
-
-
-static void gmidi_reset_config(struct gmidi_device *dev)
-{
-	if (dev->config == 0) {
-		return;
-	}
-
-	DBG(dev, "reset config\n");
-
-	/* just disable endpoints, forcing completion of pending i/o.
-	 * all our completion handlers free their requests in this case.
-	 */
-	usb_ep_disable(dev->in_ep);
-	usb_ep_disable(dev->out_ep);
-	dev->config = 0;
-}
-
-/* change our operational config.  this code must agree with the code
- * that returns config descriptors, and altsetting code.
- *
- * it's also responsible for power management interactions. some
- * configurations might not work with our current power sources.
- *
- * note that some device controller hardware will constrain what this
- * code can do, perhaps by disallowing more than one configuration or
- * by limiting configuration choices (like the pxa2xx).
- */
-static int
-gmidi_set_config(struct gmidi_device *dev, unsigned number, gfp_t gfp_flags)
-{
-	int result = 0;
-	struct usb_gadget *gadget = dev->gadget;
-
-#if 0
-	/* FIXME */
-	/* Hacking this bit out fixes a bug where on receipt of two
-	   USB_REQ_SET_CONFIGURATION messages, we end up with no
-	   buffered OUT requests waiting for data. This is clearly
-	   hiding a bug elsewhere, because if the config didn't
-	   change then we really shouldn't do anything. */
-	/* Having said that, when we do "change" from config 1
-	   to config 1, we at least gmidi_reset_config() which
-	   clears out any requests on endpoints, so it's not like
-	   we leak or anything. */
-	if (number == dev->config) {
-		return 0;
-	}
-#endif
-
-	gmidi_reset_config(dev);
-
-	switch (number) {
-	case GMIDI_CONFIG:
-		result = set_gmidi_config(dev, gfp_flags);
-		break;
-	default:
-		result = -EINVAL;
-		/* FALL THROUGH */
-	case 0:
-		return result;
-	}
-
-	if (!result && (!dev->in_ep || !dev->out_ep)) {
-		result = -ENODEV;
-	}
-	if (result) {
-		gmidi_reset_config(dev);
-	} else {
-		char *speed;
-
-		switch (gadget->speed) {
-		case USB_SPEED_LOW:	speed = "low"; break;
-		case USB_SPEED_FULL:	speed = "full"; break;
-		case USB_SPEED_HIGH:	speed = "high"; break;
-		default:		speed = "?"; break;
-		}
-
-		dev->config = number;
-		INFO(dev, "%s speed\n", speed);
-	}
-	return result;
-}
-
-
-static void gmidi_setup_complete(struct usb_ep *ep, struct usb_request *req)
-{
-	if (req->status || req->actual != req->length) {
-		DBG((struct gmidi_device *) ep->driver_data,
-				"setup complete --> %d, %d/%d\n",
-				req->status, req->actual, req->length);
-	}
-}
-
-/*
- * The setup() callback implements all the ep0 functionality that's
- * not handled lower down, in hardware or the hardware driver (like
- * device and endpoint feature flags, and their status).  It's all
- * housekeeping for the gadget function we're implementing.  Most of
- * the work is in config-specific setup.
- */
-static int gmidi_setup(struct usb_gadget *gadget,
-			const struct usb_ctrlrequest *ctrl)
-{
-	struct gmidi_device *dev = get_gadget_data(gadget);
-	struct usb_request *req = dev->req;
-	int value = -EOPNOTSUPP;
-	u16 w_index = le16_to_cpu(ctrl->wIndex);
-	u16 w_value = le16_to_cpu(ctrl->wValue);
-	u16 w_length = le16_to_cpu(ctrl->wLength);
-
-	/* usually this stores reply data in the pre-allocated ep0 buffer,
-	 * but config change events will reconfigure hardware.
-	 */
-	req->zero = 0;
-	switch (ctrl->bRequest) {
-
-	case USB_REQ_GET_DESCRIPTOR:
-		if (ctrl->bRequestType != USB_DIR_IN) {
-			goto unknown;
-		}
-		switch (w_value >> 8) {
-
-		case USB_DT_DEVICE:
-			device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
-			value = min(w_length, (u16) sizeof(device_desc));
-			memcpy(req->buf, &device_desc, value);
-			break;
-		case USB_DT_CONFIG:
-			value = config_buf(gadget, req->buf,
-					w_value >> 8,
-					w_value & 0xff);
-			if (value >= 0) {
-				value = min(w_length, (u16)value);
-			}
-			break;
-
-		case USB_DT_STRING:
-			/* wIndex == language code.
-			 * this driver only handles one language, you can
-			 * add string tables for other languages, using
-			 * any UTF-8 characters
-			 */
-			value = usb_gadget_get_string(&stringtab,
-					w_value & 0xff, req->buf);
-			if (value >= 0) {
-				value = min(w_length, (u16)value);
-			}
-			break;
-		}
-		break;
-
-	/* currently two configs, two speeds */
-	case USB_REQ_SET_CONFIGURATION:
-		if (ctrl->bRequestType != 0) {
-			goto unknown;
-		}
-		if (gadget->a_hnp_support) {
-			DBG(dev, "HNP available\n");
-		} else if (gadget->a_alt_hnp_support) {
-			DBG(dev, "HNP needs a different root port\n");
-		} else {
-			VDBG(dev, "HNP inactive\n");
-		}
-		spin_lock(&dev->lock);
-		value = gmidi_set_config(dev, w_value, GFP_ATOMIC);
-		spin_unlock(&dev->lock);
-		break;
-	case USB_REQ_GET_CONFIGURATION:
-		if (ctrl->bRequestType != USB_DIR_IN) {
-			goto unknown;
-		}
-		*(u8 *)req->buf = dev->config;
-		value = min(w_length, (u16)1);
-		break;
-
-	/* until we add altsetting support, or other interfaces,
-	 * only 0/0 are possible.  pxa2xx only supports 0/0 (poorly)
-	 * and already killed pending endpoint I/O.
-	 */
-	case USB_REQ_SET_INTERFACE:
-		if (ctrl->bRequestType != USB_RECIP_INTERFACE) {
-			goto unknown;
-		}
-		spin_lock(&dev->lock);
-		if (dev->config && w_index < GMIDI_NUM_INTERFACES
-			&& w_value == 0)
-		{
-			u8 config = dev->config;
-
-			/* resets interface configuration, forgets about
-			 * previous transaction state (queued bufs, etc)
-			 * and re-inits endpoint state (toggle etc)
-			 * no response queued, just zero status == success.
-			 * if we had more than one interface we couldn't
-			 * use this "reset the config" shortcut.
-			 */
-			gmidi_reset_config(dev);
-			gmidi_set_config(dev, config, GFP_ATOMIC);
-			value = 0;
-		}
-		spin_unlock(&dev->lock);
-		break;
-	case USB_REQ_GET_INTERFACE:
-		if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) {
-			goto unknown;
-		}
-		if (!dev->config) {
-			break;
-		}
-		if (w_index >= GMIDI_NUM_INTERFACES) {
-			value = -EDOM;
-			break;
-		}
-		*(u8 *)req->buf = 0;
-		value = min(w_length, (u16)1);
-		break;
-
-	default:
-unknown:
-		VDBG(dev, "unknown control req%02x.%02x v%04x i%04x l%d\n",
-			ctrl->bRequestType, ctrl->bRequest,
-			w_value, w_index, w_length);
-	}
-
-	/* respond with data transfer before status phase? */
-	if (value >= 0) {
-		req->length = value;
-		req->zero = value < w_length;
-		value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
-		if (value < 0) {
-			DBG(dev, "ep_queue --> %d\n", value);
-			req->status = 0;
-			gmidi_setup_complete(gadget->ep0, req);
-		}
-	}
-
-	/* device either stalls (value < 0) or reports success */
-	return value;
-}
-
-static void gmidi_disconnect(struct usb_gadget *gadget)
-{
-	struct gmidi_device *dev = get_gadget_data(gadget);
-	unsigned long flags;
-
-	spin_lock_irqsave(&dev->lock, flags);
-	gmidi_reset_config(dev);
-
-	/* a more significant application might have some non-usb
-	 * activities to quiesce here, saving resources like power
-	 * or pushing the notification up a network stack.
-	 */
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	/* next we may get setup() calls to enumerate new connections;
-	 * or an unbind() during shutdown (including removing module).
-	 */
-}
-
-static void /* __init_or_exit */ gmidi_unbind(struct usb_gadget *gadget)
-{
-	struct gmidi_device *dev = get_gadget_data(gadget);
-	struct snd_card *card;
-
-	DBG(dev, "unbind\n");
-
-	card = dev->card;
-	dev->card = NULL;
-	if (card) {
-		snd_card_free(card);
-	}
-
-	/* we've already been disconnected ... no i/o is active */
-	if (dev->req) {
-		dev->req->length = USB_BUFSIZ;
-		free_ep_req(gadget->ep0, dev->req);
-	}
-	kfree(dev);
-	set_gadget_data(gadget, NULL);
-}
-
-static int gmidi_snd_free(struct snd_device *device)
+static int __exit midi_unbind(struct usb_composite_dev *dev)
 {
 	return 0;
 }
 
-static void gmidi_transmit_packet(struct usb_request *req, uint8_t p0,
-					uint8_t p1, uint8_t p2, uint8_t p3)
-{
-	unsigned length = req->length;
-	u8 *buf = (u8 *)req->buf + length;
-
-	buf[0] = p0;
-	buf[1] = p1;
-	buf[2] = p2;
-	buf[3] = p3;
-	req->length = length + 4;
-}
-
-/*
- * Converts MIDI commands to USB MIDI packets.
- */
-static void gmidi_transmit_byte(struct usb_request *req,
-				struct gmidi_in_port *port, uint8_t b)
-{
-	uint8_t p0 = port->cable;
-
-	if (b >= 0xf8) {
-		gmidi_transmit_packet(req, p0 | 0x0f, b, 0, 0);
-	} else if (b >= 0xf0) {
-		switch (b) {
-		case 0xf0:
-			port->data[0] = b;
-			port->state = STATE_SYSEX_1;
-			break;
-		case 0xf1:
-		case 0xf3:
-			port->data[0] = b;
-			port->state = STATE_1PARAM;
-			break;
-		case 0xf2:
-			port->data[0] = b;
-			port->state = STATE_2PARAM_1;
-			break;
-		case 0xf4:
-		case 0xf5:
-			port->state = STATE_UNKNOWN;
-			break;
-		case 0xf6:
-			gmidi_transmit_packet(req, p0 | 0x05, 0xf6, 0, 0);
-			port->state = STATE_UNKNOWN;
-			break;
-		case 0xf7:
-			switch (port->state) {
-			case STATE_SYSEX_0:
-				gmidi_transmit_packet(req,
-					p0 | 0x05, 0xf7, 0, 0);
-				break;
-			case STATE_SYSEX_1:
-				gmidi_transmit_packet(req,
-					p0 | 0x06, port->data[0], 0xf7, 0);
-				break;
-			case STATE_SYSEX_2:
-				gmidi_transmit_packet(req,
-					p0 | 0x07, port->data[0],
-					port->data[1], 0xf7);
-				break;
-			}
-			port->state = STATE_UNKNOWN;
-			break;
-		}
-	} else if (b >= 0x80) {
-		port->data[0] = b;
-		if (b >= 0xc0 && b <= 0xdf)
-			port->state = STATE_1PARAM;
-		else
-			port->state = STATE_2PARAM_1;
-	} else { /* b < 0x80 */
-		switch (port->state) {
-		case STATE_1PARAM:
-			if (port->data[0] < 0xf0) {
-				p0 |= port->data[0] >> 4;
-			} else {
-				p0 |= 0x02;
-				port->state = STATE_UNKNOWN;
-			}
-			gmidi_transmit_packet(req, p0, port->data[0], b, 0);
-			break;
-		case STATE_2PARAM_1:
-			port->data[1] = b;
-			port->state = STATE_2PARAM_2;
-			break;
-		case STATE_2PARAM_2:
-			if (port->data[0] < 0xf0) {
-				p0 |= port->data[0] >> 4;
-				port->state = STATE_2PARAM_1;
-			} else {
-				p0 |= 0x03;
-				port->state = STATE_UNKNOWN;
-			}
-			gmidi_transmit_packet(req,
-				p0, port->data[0], port->data[1], b);
-			break;
-		case STATE_SYSEX_0:
-			port->data[0] = b;
-			port->state = STATE_SYSEX_1;
-			break;
-		case STATE_SYSEX_1:
-			port->data[1] = b;
-			port->state = STATE_SYSEX_2;
-			break;
-		case STATE_SYSEX_2:
-			gmidi_transmit_packet(req,
-				p0 | 0x04, port->data[0], port->data[1], b);
-			port->state = STATE_SYSEX_0;
-			break;
-		}
-	}
-}
-
-static void gmidi_transmit(struct gmidi_device *dev, struct usb_request *req)
-{
-	struct usb_ep *ep = dev->in_ep;
-	struct gmidi_in_port *port = &dev->in_port;
-
-	if (!ep) {
-		return;
-	}
-	if (!req) {
-		req = alloc_ep_req(ep, buflen);
-	}
-	if (!req) {
-		ERROR(dev, "gmidi_transmit: alloc_ep_request failed\n");
-		return;
-	}
-	req->length = 0;
-	req->complete = gmidi_complete;
-
-	if (port->active) {
-		while (req->length + 3 < buflen) {
-			uint8_t b;
-			if (snd_rawmidi_transmit(dev->in_substream, &b, 1)
-				!= 1)
-			{
-				port->active = 0;
-				break;
-			}
-			gmidi_transmit_byte(req, port, b);
-		}
-	}
-	if (req->length > 0) {
-		usb_ep_queue(ep, req, GFP_ATOMIC);
-	} else {
-		free_ep_req(ep, req);
-	}
-}
-
-static void gmidi_in_tasklet(unsigned long data)
-{
-	struct gmidi_device *dev = (struct gmidi_device *)data;
-
-	gmidi_transmit(dev, NULL);
-}
-
-static int gmidi_in_open(struct snd_rawmidi_substream *substream)
-{
-	struct gmidi_device *dev = substream->rmidi->private_data;
-
-	VDBG(dev, "gmidi_in_open\n");
-	dev->in_substream = substream;
-	dev->in_port.state = STATE_UNKNOWN;
-	return 0;
-}
-
-static int gmidi_in_close(struct snd_rawmidi_substream *substream)
-{
-	struct gmidi_device *dev = substream->rmidi->private_data;
-
-	VDBG(dev, "gmidi_in_close\n");
-	return 0;
-}
-
-static void gmidi_in_trigger(struct snd_rawmidi_substream *substream, int up)
-{
-	struct gmidi_device *dev = substream->rmidi->private_data;
-
-	VDBG(dev, "gmidi_in_trigger %d\n", up);
-	dev->in_port.active = up;
-	if (up) {
-		tasklet_hi_schedule(&dev->tasklet);
-	}
-}
-
-static int gmidi_out_open(struct snd_rawmidi_substream *substream)
-{
-	struct gmidi_device *dev = substream->rmidi->private_data;
-
-	VDBG(dev, "gmidi_out_open\n");
-	dev->out_substream = substream;
-	return 0;
-}
-
-static int gmidi_out_close(struct snd_rawmidi_substream *substream)
-{
-	struct gmidi_device *dev = substream->rmidi->private_data;
-
-	VDBG(dev, "gmidi_out_close\n");
-	return 0;
-}
-
-static void gmidi_out_trigger(struct snd_rawmidi_substream *substream, int up)
-{
-	struct gmidi_device *dev = substream->rmidi->private_data;
-
-	VDBG(dev, "gmidi_out_trigger %d\n", up);
-	if (up) {
-		set_bit(substream->number, &dev->out_triggered);
-	} else {
-		clear_bit(substream->number, &dev->out_triggered);
-	}
-}
-
-static struct snd_rawmidi_ops gmidi_in_ops = {
-	.open = gmidi_in_open,
-	.close = gmidi_in_close,
-	.trigger = gmidi_in_trigger,
+static struct usb_configuration midi_config = {
+	.label		= "MIDI Gadget",
+	.bConfigurationValue = 1,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes	= USB_CONFIG_ATT_ONE,
+	.bMaxPower	= CONFIG_USB_GADGET_VBUS_DRAW / 2,
 };
 
-static struct snd_rawmidi_ops gmidi_out_ops = {
-	.open = gmidi_out_open,
-	.close = gmidi_out_close,
-	.trigger = gmidi_out_trigger
-};
-
-/* register as a sound "card" */
-static int gmidi_register_card(struct gmidi_device *dev)
+static int __init midi_bind_config(struct usb_configuration *c)
 {
-	struct snd_card *card;
-	struct snd_rawmidi *rmidi;
-	int err;
-	int out_ports = 1;
-	int in_ports = 1;
-	static struct snd_device_ops ops = {
-		.dev_free = gmidi_snd_free,
-	};
-
-	err = snd_card_create(index, id, THIS_MODULE, 0, &card);
-	if (err < 0) {
-		ERROR(dev, "snd_card_create failed\n");
-		goto fail;
-	}
-	dev->card = card;
-
-	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, dev, &ops);
-	if (err < 0) {
-		ERROR(dev, "snd_device_new failed: error %d\n", err);
-		goto fail;
-	}
-
-	strcpy(card->driver, longname);
-	strcpy(card->longname, longname);
-	strcpy(card->shortname, shortname);
-
-	/* Set up rawmidi */
-	dev->in_port.dev = dev;
-	dev->in_port.active = 0;
-	snd_component_add(card, "MIDI");
-	err = snd_rawmidi_new(card, "USB MIDI Gadget", 0,
-			      out_ports, in_ports, &rmidi);
-	if (err < 0) {
-		ERROR(dev, "snd_rawmidi_new failed: error %d\n", err);
-		goto fail;
-	}
-	dev->rmidi = rmidi;
-	strcpy(rmidi->name, card->shortname);
-	rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT |
-			    SNDRV_RAWMIDI_INFO_INPUT |
-			    SNDRV_RAWMIDI_INFO_DUPLEX;
-	rmidi->private_data = dev;
-
-	/* Yes, rawmidi OUTPUT = USB IN, and rawmidi INPUT = USB OUT.
-	   It's an upside-down world being a gadget. */
-	snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, &gmidi_in_ops);
-	snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, &gmidi_out_ops);
-
-	snd_card_set_dev(card, &dev->gadget->dev);
-
-	/* register it - we're ready to go */
-	err = snd_card_register(card);
-	if (err < 0) {
-		ERROR(dev, "snd_card_register failed\n");
-		goto fail;
-	}
-
-	VDBG(dev, "gmidi_register_card finished ok\n");
-	return 0;
-
-fail:
-	if (dev->card) {
-		snd_card_free(dev->card);
-		dev->card = NULL;
-	}
-	return err;
+	return f_midi_bind_config(c, index, id,
+				  in_ports, out_ports,
+				  buflen, qlen);
 }
 
-/*
- * Creates an output endpoint, and initializes output ports.
- */
-static int __init gmidi_bind(struct usb_gadget *gadget)
+static int __init midi_bind(struct usb_composite_dev *cdev)
 {
-	struct gmidi_device *dev;
-	struct usb_ep *in_ep, *out_ep;
-	int gcnum, err = 0;
+	struct usb_gadget *gadget = cdev->gadget;
+	int gcnum, status;
 
-	/* support optional vendor/distro customization */
-	if (idVendor) {
-		if (!idProduct) {
-			pr_err("idVendor needs idProduct!\n");
-			return -ENODEV;
-		}
-		device_desc.idVendor = cpu_to_le16(idVendor);
-		device_desc.idProduct = cpu_to_le16(idProduct);
-		if (bcdDevice) {
-			device_desc.bcdDevice = cpu_to_le16(bcdDevice);
-		}
-	}
-	if (iManufacturer) {
-		strlcpy(manufacturer, iManufacturer, sizeof(manufacturer));
-	} else {
-		snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s",
-			init_utsname()->sysname, init_utsname()->release,
-			gadget->name);
-	}
-	if (iProduct) {
-		strlcpy(product_desc, iProduct, sizeof(product_desc));
-	}
-	if (iSerialNumber) {
-		device_desc.iSerialNumber = STRING_SERIAL,
-		strlcpy(serial_number, iSerialNumber, sizeof(serial_number));
-	}
+	status = usb_string_id(cdev);
+	if (status < 0)
+		return status;
+	strings_dev[STRING_MANUFACTURER_IDX].id = status;
+	device_desc.iManufacturer = status;
 
-	/* Bulk-only drivers like this one SHOULD be able to
-	 * autoconfigure on any sane usb controller driver,
-	 * but there may also be important quirks to address.
-	 */
-	usb_ep_autoconfig_reset(gadget);
-	in_ep = usb_ep_autoconfig(gadget, &bulk_in_desc);
-	if (!in_ep) {
-autoconf_fail:
-		pr_err("%s: can't autoconfigure on %s\n",
-			shortname, gadget->name);
-		return -ENODEV;
-	}
-	EP_IN_NAME = in_ep->name;
-	in_ep->driver_data = in_ep;	/* claim */
+	status = usb_string_id(cdev);
+	if (status < 0)
+		return status;
+	strings_dev[STRING_PRODUCT_IDX].id = status;
+	device_desc.iProduct = status;
 
-	out_ep = usb_ep_autoconfig(gadget, &bulk_out_desc);
-	if (!out_ep) {
-		goto autoconf_fail;
-	}
-	EP_OUT_NAME = out_ep->name;
-	out_ep->driver_data = out_ep;	/* claim */
+	/* config description */
+	status = usb_string_id(cdev);
+	if (status < 0)
+		return status;
+	strings_dev[STRING_DESCRIPTION_IDX].id = status;
+
+	midi_config.iConfiguration = status;
 
 	gcnum = usb_gadget_controller_number(gadget);
-	if (gcnum >= 0) {
-		device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
-	} else {
+	if (gcnum < 0) {
 		/* gmidi is so simple (no altsettings) that
 		 * it SHOULD NOT have problems with bulk-capable hardware.
 		 * so warn about unrecognized controllers, don't panic.
 		 */
 		pr_warning("%s: controller '%s' not recognized\n",
-			shortname, gadget->name);
+			   __func__, gadget->name);
 		device_desc.bcdDevice = cpu_to_le16(0x9999);
+	} else {
+		device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
 	}
 
+	status = usb_add_config(cdev, &midi_config, midi_bind_config);
+	if (status < 0)
+		return status;
 
-	/* ok, we made sense of the hardware ... */
-	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-	if (!dev) {
-		return -ENOMEM;
-	}
-	spin_lock_init(&dev->lock);
-	dev->gadget = gadget;
-	dev->in_ep = in_ep;
-	dev->out_ep = out_ep;
-	set_gadget_data(gadget, dev);
-	tasklet_init(&dev->tasklet, gmidi_in_tasklet, (unsigned long)dev);
-
-	/* preallocate control response and buffer */
-	dev->req = alloc_ep_req(gadget->ep0, USB_BUFSIZ);
-	if (!dev->req) {
-		err = -ENOMEM;
-		goto fail;
-	}
-
-	dev->req->complete = gmidi_setup_complete;
-
-	gadget->ep0->driver_data = dev;
-
-	INFO(dev, "%s, version: " DRIVER_VERSION "\n", longname);
-	INFO(dev, "using %s, OUT %s IN %s\n", gadget->name,
-		EP_OUT_NAME, EP_IN_NAME);
-
-	/* register as an ALSA sound card */
-	err = gmidi_register_card(dev);
-	if (err < 0) {
-		goto fail;
-	}
-
-	VDBG(dev, "gmidi_bind finished ok\n");
+	pr_info("%s\n", longname);
 	return 0;
-
-fail:
-	gmidi_unbind(gadget);
-	return err;
-}
-
-
-static void gmidi_suspend(struct usb_gadget *gadget)
-{
-	struct gmidi_device *dev = get_gadget_data(gadget);
-
-	if (gadget->speed == USB_SPEED_UNKNOWN) {
-		return;
-	}
-
-	DBG(dev, "suspend\n");
-}
-
-static void gmidi_resume(struct usb_gadget *gadget)
-{
-	struct gmidi_device *dev = get_gadget_data(gadget);
-
-	DBG(dev, "resume\n");
 }
 
-
-static struct usb_gadget_driver gmidi_driver = {
-	.speed		= USB_SPEED_FULL,
-	.function	= (char *)longname,
-	.unbind		= gmidi_unbind,
-
-	.setup		= gmidi_setup,
-	.disconnect	= gmidi_disconnect,
-
-	.suspend	= gmidi_suspend,
-	.resume		= gmidi_resume,
-
-	.driver		= {
-		.name		= (char *)shortname,
-		.owner		= THIS_MODULE,
-	},
+static struct usb_composite_driver midi_driver = {
+	.name		= (char *) longname,
+	.dev		= &device_desc,
+	.strings	= dev_strings,
+	.max_speed	= USB_SPEED_HIGH,
+	.unbind		= __exit_p(midi_unbind),
 };
 
-static int __init gmidi_init(void)
+static int __init midi_init(void)
 {
-	return usb_gadget_probe_driver(&gmidi_driver, gmidi_bind);
+	return usb_composite_probe(&midi_driver, midi_bind);
 }
-module_init(gmidi_init);
+module_init(midi_init);
 
-static void __exit gmidi_cleanup(void)
+static void __exit midi_cleanup(void)
 {
-	usb_gadget_unregister_driver(&gmidi_driver);
+	usb_composite_unregister(&midi_driver);
 }
-module_exit(gmidi_cleanup);
+module_exit(midi_cleanup);
 
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
index 9fb5750..f888c3e 100644
--- a/drivers/usb/gadget/hid.c
+++ b/drivers/usb/gadget/hid.c
@@ -9,15 +9,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index 692fd9b..2d978c0 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -689,7 +689,7 @@ static int imx_ep_enable(struct usb_ep *usb_ep,
 		return -EINVAL;
 	}
 
-	if (imx_ep->fifosize < le16_to_cpu(desc->wMaxPacketSize)) {
+	if (imx_ep->fifosize < usb_endpoint_maxp(desc)) {
 		D_ERR(imx_usb->dev,
 			"<%s> bad %s maxpacket\n", __func__, usb_ep->name);
 		return -ERANGE;
@@ -1478,7 +1478,7 @@ static int __init imx_udc_probe(struct platform_device *pdev)
 
 	for (i = 0; i < IMX_USB_NB_EP + 1; i++) {
 		ret = request_irq(imx_usb->usbd_int[i], intr_handler(i),
-				     IRQF_DISABLED, driver_name, imx_usb);
+				     0, driver_name, imx_usb);
 		if (ret) {
 			dev_err(&pdev->dev, "can't get irq %i, err %d\n",
 				imx_usb->usbd_int[i], ret);
diff --git a/drivers/usb/gadget/imx_udc.h b/drivers/usb/gadget/imx_udc.h
index 7136c24..d118fb7 100644
--- a/drivers/usb/gadget/imx_udc.h
+++ b/drivers/usb/gadget/imx_udc.h
@@ -8,11 +8,6 @@
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
  */
 
 #ifndef __LINUX_USB_GADGET_IMX_H
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 1b24099..a392ec0 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -8,15 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index ff4d40d..c9fa3bf 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -5,16 +5,6 @@
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
  */
 
 
@@ -60,9 +50,6 @@ static const char driver_name[] = "langwell_udc";
 static const char driver_desc[] = DRIVER_DESC;
 
 
-/* controller device global variable */
-static struct langwell_udc	*the_controller;
-
 /* for endpoint 0 operations */
 static const struct usb_endpoint_descriptor
 langwell_ep0_desc = {
@@ -283,7 +270,7 @@ static int langwell_ep_enable(struct usb_ep *_ep,
 	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
 		return -ESHUTDOWN;
 
-	max = le16_to_cpu(desc->wMaxPacketSize);
+	max = usb_endpoint_maxp(desc);
 
 	/*
 	 * disable HW zero length termination select
@@ -1321,9 +1308,12 @@ static int langwell_pullup(struct usb_gadget *_gadget, int is_on)
 	return 0;
 }
 
-static int langwell_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
-static int langwell_stop(struct usb_gadget_driver *driver);
+static int langwell_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver);
+
+static int langwell_stop(struct usb_gadget *g,
+		struct usb_gadget_driver *driver);
+
 /* device controller usb_gadget_ops structure */
 static const struct usb_gadget_ops langwell_ops = {
 
@@ -1345,8 +1335,8 @@ static const struct usb_gadget_ops langwell_ops = {
 	/* D+ pullup, software-controlled connect/disconnect to USB host */
 	.pullup		= langwell_pullup,
 
-	.start		= langwell_start,
-	.stop		= langwell_stop,
+	.udc_start	= langwell_start,
+	.udc_stop	= langwell_stop,
 };
 
 
@@ -1561,7 +1551,7 @@ static void stop_activity(struct langwell_udc *dev,
 static ssize_t show_function(struct device *_dev,
 		struct device_attribute *attr, char *buf)
 {
-	struct langwell_udc	*dev = the_controller;
+	struct langwell_udc	*dev = dev_get_drvdata(_dev);
 
 	if (!dev->driver || !dev->driver->function
 			|| strlen(dev->driver->function) > PAGE_SIZE)
@@ -1572,11 +1562,25 @@ static ssize_t show_function(struct device *_dev,
 static DEVICE_ATTR(function, S_IRUGO, show_function, NULL);
 
 
+static inline enum usb_device_speed lpm_device_speed(u32 reg)
+{
+	switch (LPM_PSPD(reg)) {
+	case LPM_SPEED_HIGH:
+		return USB_SPEED_HIGH;
+	case LPM_SPEED_FULL:
+		return USB_SPEED_FULL;
+	case LPM_SPEED_LOW:
+		return USB_SPEED_LOW;
+	default:
+		return USB_SPEED_UNKNOWN;
+	}
+}
+
 /* device "langwell_udc" sysfs attribute file */
 static ssize_t show_langwell_udc(struct device *_dev,
 		struct device_attribute *attr, char *buf)
 {
-	struct langwell_udc	*dev = the_controller;
+	struct langwell_udc	*dev = dev_get_drvdata(_dev);
 	struct langwell_request *req;
 	struct langwell_ep	*ep = NULL;
 	char			*next;
@@ -1700,20 +1704,7 @@ static ssize_t show_langwell_udc(struct device *_dev,
 		"BmAttributes: %d\n\n",
 		LPM_PTS(tmp_reg),
 		(tmp_reg & LPM_STS) ? 1 : 0,
-		({
-			char	*s;
-			switch (LPM_PSPD(tmp_reg)) {
-			case LPM_SPEED_FULL:
-				s = "Full Speed"; break;
-			case LPM_SPEED_LOW:
-				s = "Low Speed"; break;
-			case LPM_SPEED_HIGH:
-				s = "High Speed"; break;
-			default:
-				s = "Unknown Speed"; break;
-			}
-			s;
-		}),
+		usb_speed_string(lpm_device_speed(tmp_reg)),
 		(tmp_reg & LPM_PFSC) ? "Force Full Speed" : "Not Force",
 		(tmp_reg & LPM_PHCD) ? "Disabled" : "Enabled",
 		LPM_BA(tmp_reg));
@@ -1821,7 +1812,7 @@ static DEVICE_ATTR(langwell_udc, S_IRUGO, show_langwell_udc, NULL);
 static ssize_t store_remote_wakeup(struct device *_dev,
 		struct device_attribute *attr, const char *buf, size_t count)
 {
-	struct langwell_udc	*dev = the_controller;
+	struct langwell_udc	*dev = dev_get_drvdata(_dev);
 	unsigned long		flags;
 	ssize_t			rc = count;
 
@@ -1857,21 +1848,15 @@ static DEVICE_ATTR(remote_wakeup, S_IWUSR, NULL, store_remote_wakeup);
  * the driver might get unbound.
  */
 
-static int langwell_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+static int langwell_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
 {
-	struct langwell_udc	*dev = the_controller;
+	struct langwell_udc	*dev = gadget_to_langwell(g);
 	unsigned long		flags;
 	int			retval;
 
-	if (!dev)
-		return -ENODEV;
-
 	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
 
-	if (dev->driver)
-		return -EBUSY;
-
 	spin_lock_irqsave(&dev->lock, flags);
 
 	/* hook up the driver ... */
@@ -1881,18 +1866,9 @@ static int langwell_start(struct usb_gadget_driver *driver,
 
 	spin_unlock_irqrestore(&dev->lock, flags);
 
-	retval = bind(&dev->gadget);
-	if (retval) {
-		dev_dbg(&dev->pdev->dev, "bind to driver %s --> %d\n",
-				driver->driver.name, retval);
-		dev->driver = NULL;
-		dev->gadget.dev.driver = NULL;
-		return retval;
-	}
-
 	retval = device_create_file(&dev->pdev->dev, &dev_attr_function);
 	if (retval)
-		goto err_unbind;
+		goto err;
 
 	dev->usb_state = USB_STATE_ATTACHED;
 	dev->ep0_state = WAIT_FOR_SETUP;
@@ -1909,31 +1885,27 @@ static int langwell_start(struct usb_gadget_driver *driver,
 	dev_info(&dev->pdev->dev, "register driver: %s\n",
 			driver->driver.name);
 	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
+
 	return 0;
 
-err_unbind:
-	driver->unbind(&dev->gadget);
+err:
 	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
 
 	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
+
 	return retval;
 }
 
 /* unregister gadget driver */
-static int langwell_stop(struct usb_gadget_driver *driver)
+static int langwell_stop(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
 {
-	struct langwell_udc	*dev = the_controller;
+	struct langwell_udc	*dev = gadget_to_langwell(g);
 	unsigned long		flags;
 
-	if (!dev)
-		return -ENODEV;
-
 	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
 
-	if (unlikely(!driver || !driver->unbind))
-		return -EINVAL;
-
 	/* exit PHY low power suspend */
 	if (dev->pdev->device != 0x0829)
 		langwell_phy_low_power(dev, 0);
@@ -1956,8 +1928,6 @@ static int langwell_stop(struct usb_gadget_driver *driver)
 	stop_activity(dev, driver);
 	spin_unlock_irqrestore(&dev->lock, flags);
 
-	/* unbind gadget driver */
-	driver->unbind(&dev->gadget);
 	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
 
@@ -1966,6 +1936,7 @@ static int langwell_stop(struct usb_gadget_driver *driver)
 	dev_info(&dev->pdev->dev, "unregistered driver '%s'\n",
 			driver->driver.name);
 	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
+
 	return 0;
 }
 
@@ -2657,12 +2628,10 @@ done:
 	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
 }
 
-
 /* port change detect interrupt handler */
 static void handle_port_change(struct langwell_udc *dev)
 {
 	u32	portsc1, devlc;
-	u32	speed;
 
 	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
 
@@ -2677,24 +2646,9 @@ static void handle_port_change(struct langwell_udc *dev)
 	/* bus reset is finished */
 	if (!(portsc1 & PORTS_PR)) {
 		/* get the speed */
-		speed = LPM_PSPD(devlc);
-		switch (speed) {
-		case LPM_SPEED_HIGH:
-			dev->gadget.speed = USB_SPEED_HIGH;
-			break;
-		case LPM_SPEED_FULL:
-			dev->gadget.speed = USB_SPEED_FULL;
-			break;
-		case LPM_SPEED_LOW:
-			dev->gadget.speed = USB_SPEED_LOW;
-			break;
-		default:
-			dev->gadget.speed = USB_SPEED_UNKNOWN;
-			break;
-		}
-		dev_vdbg(&dev->pdev->dev,
-				"speed = %d, dev->gadget.speed = %d\n",
-				speed, dev->gadget.speed);
+		dev->gadget.speed = lpm_device_speed(devlc);
+		dev_vdbg(&dev->pdev->dev, "dev->gadget.speed = %d\n",
+			dev->gadget.speed);
 	}
 
 	/* LPM L0 to L1 */
@@ -2999,7 +2953,7 @@ static irqreturn_t langwell_irq(int irq, void *_dev)
 /* release device structure */
 static void gadget_release(struct device *_dev)
 {
-	struct langwell_udc	*dev = the_controller;
+	struct langwell_udc	*dev = dev_get_drvdata(_dev);
 
 	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
 
@@ -3057,7 +3011,7 @@ static void sram_deinit(struct langwell_udc *dev)
 /* tear down the binding between this driver and the pci device */
 static void langwell_udc_remove(struct pci_dev *pdev)
 {
-	struct langwell_udc	*dev = the_controller;
+	struct langwell_udc	*dev = pci_get_drvdata(pdev);
 
 	DECLARE_COMPLETION(done);
 
@@ -3124,8 +3078,6 @@ static void langwell_udc_remove(struct pci_dev *pdev)
 
 	/* free dev, wait for the release() finished */
 	wait_for_completion(&done);
-
-	the_controller = NULL;
 }
 
 
@@ -3144,11 +3096,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 	size_t			size;
 	int			retval;
 
-	if (the_controller) {
-		dev_warn(&pdev->dev, "ignoring\n");
-		return -EBUSY;
-	}
-
 	/* alloc, and start init */
 	dev = kzalloc(sizeof *dev, GFP_KERNEL);
 	if (dev == NULL) {
@@ -3368,8 +3315,6 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 			"After langwell_udc_probe(), print all registers:\n");
 	print_all_registers(dev);
 
-	the_controller = dev;
-
 	retval = device_register(&dev->gadget.dev);
 	if (retval)
 		goto error;
@@ -3404,7 +3349,7 @@ error:
 /* device controller suspend */
 static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
 {
-	struct langwell_udc	*dev = the_controller;
+	struct langwell_udc	*dev = pci_get_drvdata(pdev);
 
 	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
 
@@ -3452,7 +3397,7 @@ static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
 /* device controller resume */
 static int langwell_udc_resume(struct pci_dev *pdev)
 {
-	struct langwell_udc	*dev = the_controller;
+	struct langwell_udc	*dev = pci_get_drvdata(pdev);
 	size_t			size;
 
 	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
@@ -3534,7 +3479,7 @@ static int langwell_udc_resume(struct pci_dev *pdev)
 /* pci driver shutdown */
 static void langwell_udc_shutdown(struct pci_dev *pdev)
 {
-	struct langwell_udc	*dev = the_controller;
+	struct langwell_udc	*dev = pci_get_drvdata(pdev);
 	u32			usbmode;
 
 	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
diff --git a/drivers/usb/gadget/langwell_udc.h b/drivers/usb/gadget/langwell_udc.h
index f1d9c1b..ef79e24 100644
--- a/drivers/usb/gadget/langwell_udc.h
+++ b/drivers/usb/gadget/langwell_udc.h
@@ -5,16 +5,6 @@
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
  */
 
 #include <linux/usb/langwell_udc.h>
@@ -231,3 +221,5 @@ struct langwell_udc {
 	u16			dev_status;
 };
 
+#define gadget_to_langwell(g)	container_of((g), struct langwell_udc, gadget)
+
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 491f825..91d0af2 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -8,16 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 
 #include <linux/module.h>
@@ -370,7 +360,7 @@ static void m66592_ep_setting(struct m66592 *m66592, struct m66592_ep *ep,
 
 	ep->pipectr = get_pipectr_addr(pipenum);
 	ep->pipenum = pipenum;
-	ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	ep->ep.maxpacket = usb_endpoint_maxp(desc);
 	m66592->pipenum2ep[pipenum] = ep;
 	m66592->epaddr2ep[desc->bEndpointAddress&USB_ENDPOINT_NUMBER_MASK] = ep;
 	INIT_LIST_HEAD(&ep->queue);
@@ -447,7 +437,7 @@ static int alloc_pipe_config(struct m66592_ep *ep,
 	ep->type = info.type;
 
 	info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
-	info.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	info.maxpacket = usb_endpoint_maxp(desc);
 	info.interval = desc->bInterval;
 	if (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
 		info.dir_in = 1;
@@ -1674,7 +1664,7 @@ static int __init m66592_probe(struct platform_device *pdev)
 	m66592->timer.data = (unsigned long)m66592;
 	m66592->reg = reg;
 
-	ret = request_irq(ires->start, m66592_irq, IRQF_DISABLED | IRQF_SHARED,
+	ret = request_irq(ires->start, m66592_irq, IRQF_SHARED,
 			udc_name, m66592);
 	if (ret < 0) {
 		pr_err("request_irq error (%d)\n", ret);
diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h
index 7b93d57..9d9f7e3 100644
--- a/drivers/usb/gadget/m66592-udc.h
+++ b/drivers/usb/gadget/m66592-udc.h
@@ -8,16 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 
 #ifndef __M66592_UDC_H__
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index d3eb274..e24f72f 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -10,15 +10,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 
@@ -169,7 +160,7 @@ static struct usb_composite_driver msg_driver = {
 	.name		= "g_mass_storage",
 	.dev		= &msg_device_desc,
 	.iProduct	= DRIVER_DESC,
-	.max_speed	= USB_SPEED_HIGH,
+	.max_speed	= USB_SPEED_SUPER,
 	.needs_serial	= 1,
 };
 
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index 8c7b747..7e7f515 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -10,15 +10,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 
diff --git a/drivers/usb/gadget/mv_udc.h b/drivers/usb/gadget/mv_udc.h
index 65f1f7c..daa75c1 100644
--- a/drivers/usb/gadget/mv_udc.h
+++ b/drivers/usb/gadget/mv_udc.h
@@ -1,3 +1,11 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
 
 #ifndef __MV_UDC_H
 #define __MV_UDC_H
@@ -194,14 +202,25 @@ struct mv_udc {
 	unsigned int		ep0_dir;
 
 	unsigned int		dev_addr;
+	unsigned int		test_mode;
 
 	int			errors;
 	unsigned		softconnect:1,
 				vbus_active:1,
 				remote_wakeup:1,
 				softconnected:1,
-				force_fs:1;
-	struct clk		*clk;
+				force_fs:1,
+				clock_gating:1,
+				active:1;
+
+	struct work_struct	vbus_work;
+	struct workqueue_struct *qwork;
+
+	struct mv_usb_platform_data     *pdata;
+
+	/* some SOC has mutiple clock sources for USB*/
+	unsigned int    clknum;
+	struct clk      *clk[0];
 };
 
 /* endpoint data structure */
@@ -225,6 +244,7 @@ struct mv_req {
 	struct mv_dtd		*dtd, *head, *tail;
 	struct mv_ep		*ep;
 	struct list_head	queue;
+	unsigned int            test_mode;
 	unsigned		dtd_count;
 	unsigned		mapped:1;
 };
@@ -289,6 +309,4 @@ struct mv_dtd {
 	struct mv_dtd *next_dtd_virt;
 };
 
-extern int mv_udc_phy_init(unsigned int base);
-
 #endif
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 0b3b8d0..8924121 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -1,3 +1,14 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ * Author: Chao Xie <chao.xie@marvell.com>
+ *	   Neil Zhang <zhangwm@marvell.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
@@ -22,6 +33,7 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/platform_data/mv_usb.h>
 #include <asm/system.h>
 #include <asm/unaligned.h>
 
@@ -45,6 +57,8 @@
 #define LOOPS_USEC		(1 << LOOPS_USEC_SHIFT)
 #define LOOPS(timeout)		((timeout) >> LOOPS_USEC_SHIFT)
 
+static DECLARE_COMPLETION(release_done);
+
 static const char driver_name[] = "mv_udc";
 static const char driver_desc[] = DRIVER_DESC;
 
@@ -53,6 +67,7 @@ static struct mv_udc	*the_controller;
 int mv_usb_otgsc;
 
 static void nuke(struct mv_ep *ep, int status);
+static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver);
 
 /* for endpoint 0 operations */
 static const struct usb_endpoint_descriptor mv_ep0_desc = {
@@ -82,14 +97,16 @@ static void ep0_reset(struct mv_udc *udc)
 			(EP0_MAX_PKT_SIZE << EP_QUEUE_HEAD_MAX_PKT_LEN_POS)
 			| EP_QUEUE_HEAD_IOS;
 
+		ep->dqh->next_dtd_ptr = EP_QUEUE_HEAD_NEXT_TERMINATE;
+
 		epctrlx = readl(&udc->op_regs->epctrlx[0]);
 		if (i) {	/* TX */
-			epctrlx |= EPCTRL_TX_ENABLE | EPCTRL_TX_DATA_TOGGLE_RST
+			epctrlx |= EPCTRL_TX_ENABLE
 				| (USB_ENDPOINT_XFER_CONTROL
 					<< EPCTRL_TX_EP_TYPE_SHIFT);
 
 		} else {	/* RX */
-			epctrlx |= EPCTRL_RX_ENABLE | EPCTRL_RX_DATA_TOGGLE_RST
+			epctrlx |= EPCTRL_RX_ENABLE
 				| (USB_ENDPOINT_XFER_CONTROL
 					<< EPCTRL_RX_EP_TYPE_SHIFT);
 		}
@@ -122,6 +139,7 @@ static int process_ep_req(struct mv_udc *udc, int index,
 	int i, direction;
 	int retval = 0;
 	u32 errors;
+	u32 bit_pos;
 
 	curr_dqh = &udc->ep_dqh[index];
 	direction = index % 2;
@@ -139,10 +157,20 @@ static int process_ep_req(struct mv_udc *udc, int index,
 
 		errors = curr_dtd->size_ioc_sts & DTD_ERROR_MASK;
 		if (!errors) {
-			remaining_length +=
+			remaining_length =
 				(curr_dtd->size_ioc_sts	& DTD_PACKET_SIZE)
 					>> DTD_LENGTH_BIT_POS;
 			actual -= remaining_length;
+
+			if (remaining_length) {
+				if (direction) {
+					dev_dbg(&udc->dev->dev,
+						"TX dTD remains data\n");
+					retval = -EPROTO;
+					break;
+				} else
+					break;
+			}
 		} else {
 			dev_info(&udc->dev->dev,
 				"complete_tr error: ep=%d %s: error = 0x%x\n",
@@ -164,6 +192,20 @@ static int process_ep_req(struct mv_udc *udc, int index,
 	if (retval)
 		return retval;
 
+	if (direction == EP_DIR_OUT)
+		bit_pos = 1 << curr_req->ep->ep_num;
+	else
+		bit_pos = 1 << (16 + curr_req->ep->ep_num);
+
+	while ((curr_dqh->curr_dtd_ptr == curr_dtd->td_dma)) {
+		if (curr_dtd->dtd_next == EP_QUEUE_HEAD_NEXT_TERMINATE) {
+			while (readl(&udc->op_regs->epstatus) & bit_pos)
+				udelay(1);
+			break;
+		}
+		udelay(1);
+	}
+
 	curr_req->req.actual = actual;
 
 	return 0;
@@ -481,6 +523,7 @@ static int mv_ep_enable(struct usb_ep *_ep,
 	u16 max = 0;
 	u32 bit_pos, epctrlx, direction;
 	unsigned char zlt = 0, ios = 0, mult = 0;
+	unsigned long flags;
 
 	ep = container_of(_ep, struct mv_ep, ep);
 	udc = ep->udc;
@@ -493,7 +536,7 @@ static int mv_ep_enable(struct usb_ep *_ep,
 		return -ESHUTDOWN;
 
 	direction = ep_dir(ep);
-	max = le16_to_cpu(desc->wMaxPacketSize);
+	max = usb_endpoint_maxp(desc);
 
 	/*
 	 * disable HW zero length termination select
@@ -501,9 +544,6 @@ static int mv_ep_enable(struct usb_ep *_ep,
 	 */
 	zlt = 1;
 
-	/* Get the endpoint queue head address */
-	dqh = (struct mv_dqh *)ep->dqh;
-
 	bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num);
 
 	/* Check if the Endpoint is Primed */
@@ -532,7 +572,7 @@ static int mv_ep_enable(struct usb_ep *_ep,
 	case USB_ENDPOINT_XFER_ISOC:
 		/* Calculate transactions needed for high bandwidth iso */
 		mult = (unsigned char)(1 + ((max >> 11) & 0x03));
-		max = max & 0x8ff;	/* bit 0~10 */
+		max = max & 0x7ff;	/* bit 0~10 */
 		/* 3 transactions at most */
 		if (mult > 3)
 			goto en_done;
@@ -540,6 +580,10 @@ static int mv_ep_enable(struct usb_ep *_ep,
 	default:
 		goto en_done;
 	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+	/* Get the endpoint queue head address */
+	dqh = ep->dqh;
 	dqh->max_packet_length = (max << EP_QUEUE_HEAD_MAX_PKT_LEN_POS)
 		| (mult << EP_QUEUE_HEAD_MULT_POS)
 		| (zlt ? EP_QUEUE_HEAD_ZLT_SEL : 0)
@@ -572,18 +616,20 @@ static int mv_ep_enable(struct usb_ep *_ep,
 	 */
 	epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]);
 	if ((epctrlx & EPCTRL_RX_ENABLE) == 0) {
-		epctrlx |= ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+		epctrlx |= (USB_ENDPOINT_XFER_BULK
 				<< EPCTRL_RX_EP_TYPE_SHIFT);
 		writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]);
 	}
 
 	epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]);
 	if ((epctrlx & EPCTRL_TX_ENABLE) == 0) {
-		epctrlx |= ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+		epctrlx |= (USB_ENDPOINT_XFER_BULK
 				<< EPCTRL_TX_EP_TYPE_SHIFT);
 		writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]);
 	}
 
+	spin_unlock_irqrestore(&udc->lock, flags);
+
 	return 0;
 en_done:
 	return -EINVAL;
@@ -595,6 +641,7 @@ static int  mv_ep_disable(struct usb_ep *_ep)
 	struct mv_ep *ep;
 	struct mv_dqh *dqh;
 	u32 bit_pos, epctrlx, direction;
+	unsigned long flags;
 
 	ep = container_of(_ep, struct mv_ep, ep);
 	if ((_ep == NULL) || !ep->desc)
@@ -605,6 +652,8 @@ static int  mv_ep_disable(struct usb_ep *_ep)
 	/* Get the endpoint queue head address */
 	dqh = ep->dqh;
 
+	spin_lock_irqsave(&udc->lock, flags);
+
 	direction = ep_dir(ep);
 	bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num);
 
@@ -623,6 +672,9 @@ static int  mv_ep_disable(struct usb_ep *_ep)
 
 	ep->desc = NULL;
 	ep->stopped = 1;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
 	return 0;
 }
 
@@ -655,37 +707,28 @@ static void mv_ep_fifo_flush(struct usb_ep *_ep)
 {
 	struct mv_udc *udc;
 	u32 bit_pos, direction;
-	struct mv_ep *ep = container_of(_ep, struct mv_ep, ep);
+	struct mv_ep *ep;
 	unsigned int loops;
 
+	if (!_ep)
+		return;
+
+	ep = container_of(_ep, struct mv_ep, ep);
+	if (!ep->desc)
+		return;
+
 	udc = ep->udc;
 	direction = ep_dir(ep);
-	bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num);
-	/*
-	 * Flushing will halt the pipe
-	 * Write 1 to the Flush register
-	 */
-	writel(bit_pos, &udc->op_regs->epflush);
 
-	/* Wait until flushing completed */
-	loops = LOOPS(FLUSH_TIMEOUT);
-	while (readl(&udc->op_regs->epflush) & bit_pos) {
-		/*
-		 * ENDPTFLUSH bit should be cleared to indicate this
-		 * operation is complete
-		 */
-		if (loops == 0) {
-			dev_err(&udc->dev->dev,
-				"TIMEOUT for ENDPTFLUSH=0x%x, bit_pos=0x%x\n",
-				(unsigned)readl(&udc->op_regs->epflush),
-				(unsigned)bit_pos);
-			return;
-		}
-		loops--;
-		udelay(LOOPS_USEC);
-	}
+	if (ep->ep_num == 0)
+		bit_pos = (1 << 16) | 1;
+	else if (direction == EP_DIR_OUT)
+		bit_pos = 1 << ep->ep_num;
+	else
+		bit_pos = 1 << (16 + ep->ep_num);
+
 	loops = LOOPS(EPSTATUS_TIMEOUT);
-	while (readl(&udc->op_regs->epstatus) & bit_pos) {
+	do {
 		unsigned int inter_loops;
 
 		if (loops == 0) {
@@ -700,7 +743,7 @@ static void mv_ep_fifo_flush(struct usb_ep *_ep)
 
 		/* Wait until flushing completed */
 		inter_loops = LOOPS(FLUSH_TIMEOUT);
-		while (readl(&udc->op_regs->epflush) & bit_pos) {
+		while (readl(&udc->op_regs->epflush)) {
 			/*
 			 * ENDPTFLUSH bit should be cleared to indicate this
 			 * operation is complete
@@ -717,7 +760,7 @@ static void mv_ep_fifo_flush(struct usb_ep *_ep)
 			udelay(LOOPS_USEC);
 		}
 		loops--;
-	}
+	} while (readl(&udc->op_regs->epstatus) & bit_pos);
 }
 
 /* queues (submits) an I/O request to an endpoint */
@@ -987,6 +1030,22 @@ static struct usb_ep_ops mv_ep_ops = {
 	.fifo_flush	= mv_ep_fifo_flush,	/* flush fifo */
 };
 
+static void udc_clock_enable(struct mv_udc *udc)
+{
+	unsigned int i;
+
+	for (i = 0; i < udc->clknum; i++)
+		clk_enable(udc->clk[i]);
+}
+
+static void udc_clock_disable(struct mv_udc *udc)
+{
+	unsigned int i;
+
+	for (i = 0; i < udc->clknum; i++)
+		clk_disable(udc->clk[i]);
+}
+
 static void udc_stop(struct mv_udc *udc)
 {
 	u32 tmp;
@@ -1075,6 +1134,40 @@ static int udc_reset(struct mv_udc *udc)
 	return 0;
 }
 
+static int mv_udc_enable(struct mv_udc *udc)
+{
+	int retval;
+
+	if (udc->clock_gating == 0 || udc->active)
+		return 0;
+
+	dev_dbg(&udc->dev->dev, "enable udc\n");
+	udc_clock_enable(udc);
+	if (udc->pdata->phy_init) {
+		retval = udc->pdata->phy_init(udc->phy_regs);
+		if (retval) {
+			dev_err(&udc->dev->dev,
+				"init phy error %d\n", retval);
+			udc_clock_disable(udc);
+			return retval;
+		}
+	}
+	udc->active = 1;
+
+	return 0;
+}
+
+static void mv_udc_disable(struct mv_udc *udc)
+{
+	if (udc->clock_gating && udc->active) {
+		dev_dbg(&udc->dev->dev, "disable udc\n");
+		if (udc->pdata->phy_deinit)
+			udc->pdata->phy_deinit(udc->phy_regs);
+		udc_clock_disable(udc);
+		udc->active = 0;
+	}
+}
+
 static int mv_udc_get_frame(struct usb_gadget *gadget)
 {
 	struct mv_udc *udc;
@@ -1110,22 +1203,68 @@ static int mv_udc_wakeup(struct usb_gadget *gadget)
 	return 0;
 }
 
+static int mv_udc_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	struct mv_udc *udc;
+	unsigned long flags;
+	int retval = 0;
+
+	udc = container_of(gadget, struct mv_udc, gadget);
+	spin_lock_irqsave(&udc->lock, flags);
+
+	dev_dbg(&udc->dev->dev, "%s: softconnect %d, vbus_active %d\n",
+		__func__, udc->softconnect, udc->vbus_active);
+
+	udc->vbus_active = (is_active != 0);
+	if (udc->driver && udc->softconnect && udc->vbus_active) {
+		retval = mv_udc_enable(udc);
+		if (retval == 0) {
+			/* Clock is disabled, need re-init registers */
+			udc_reset(udc);
+			ep0_reset(udc);
+			udc_start(udc);
+		}
+	} else if (udc->driver && udc->softconnect) {
+		/* stop all the transfer in queue*/
+		stop_activity(udc, udc->driver);
+		udc_stop(udc);
+		mv_udc_disable(udc);
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return retval;
+}
+
 static int mv_udc_pullup(struct usb_gadget *gadget, int is_on)
 {
 	struct mv_udc *udc;
 	unsigned long flags;
+	int retval = 0;
 
 	udc = container_of(gadget, struct mv_udc, gadget);
 	spin_lock_irqsave(&udc->lock, flags);
 
+	dev_dbg(&udc->dev->dev, "%s: softconnect %d, vbus_active %d\n",
+			__func__, udc->softconnect, udc->vbus_active);
+
 	udc->softconnect = (is_on != 0);
-	if (udc->driver && udc->softconnect)
-		udc_start(udc);
-	else
+	if (udc->driver && udc->softconnect && udc->vbus_active) {
+		retval = mv_udc_enable(udc);
+		if (retval == 0) {
+			/* Clock is disabled, need re-init registers */
+			udc_reset(udc);
+			ep0_reset(udc);
+			udc_start(udc);
+		}
+	} else if (udc->driver && udc->vbus_active) {
+		/* stop all the transfer in queue*/
+		stop_activity(udc, udc->driver);
 		udc_stop(udc);
+		mv_udc_disable(udc);
+	}
 
 	spin_unlock_irqrestore(&udc->lock, flags);
-	return 0;
+	return retval;
 }
 
 static int mv_udc_start(struct usb_gadget_driver *driver,
@@ -1140,17 +1279,15 @@ static const struct usb_gadget_ops mv_ops = {
 	/* tries to wake up the host connected to this gadget */
 	.wakeup		= mv_udc_wakeup,
 
+	/* notify controller that VBUS is powered or not */
+	.vbus_session	= mv_udc_vbus_session,
+
 	/* D+ pullup, software-controlled connect/disconnect to USB host */
 	.pullup		= mv_udc_pullup,
 	.start		= mv_udc_start,
 	.stop		= mv_udc_stop,
 };
 
-static void mv_udc_testmode(struct mv_udc *udc, u16 index, bool enter)
-{
-	dev_info(&udc->dev->dev, "Test Mode is not support yet\n");
-}
-
 static int eps_init(struct mv_udc *udc)
 {
 	struct mv_ep	*ep;
@@ -1257,7 +1394,7 @@ static int mv_udc_start(struct usb_gadget_driver *driver,
 
 	udc->usb_state = USB_STATE_ATTACHED;
 	udc->ep0_state = WAIT_FOR_SETUP;
-	udc->ep0_dir = USB_DIR_OUT;
+	udc->ep0_dir = EP_DIR_OUT;
 
 	spin_unlock_irqrestore(&udc->lock, flags);
 
@@ -1269,9 +1406,13 @@ static int mv_udc_start(struct usb_gadget_driver *driver,
 		udc->gadget.dev.driver = NULL;
 		return retval;
 	}
-	udc_reset(udc);
-	ep0_reset(udc);
-	udc_start(udc);
+
+	/* pullup is always on */
+	mv_udc_pullup(&udc->gadget, 1);
+
+	/* When boot with cable attached, there will be no vbus irq occurred */
+	if (udc->qwork)
+		queue_work(udc->qwork, &udc->vbus_work);
 
 	return 0;
 }
@@ -1284,13 +1425,16 @@ static int mv_udc_stop(struct usb_gadget_driver *driver)
 	if (!udc)
 		return -ENODEV;
 
-	udc_stop(udc);
-
 	spin_lock_irqsave(&udc->lock, flags);
 
+	mv_udc_enable(udc);
+	udc_stop(udc);
+
 	/* stop all usb activities */
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
 	stop_activity(udc, driver);
+	mv_udc_disable(udc);
+
 	spin_unlock_irqrestore(&udc->lock, flags);
 
 	/* unbind gadget driver */
@@ -1301,6 +1445,31 @@ static int mv_udc_stop(struct usb_gadget_driver *driver)
 	return 0;
 }
 
+static void mv_set_ptc(struct mv_udc *udc, u32 mode)
+{
+	u32 portsc;
+
+	portsc = readl(&udc->op_regs->portsc[0]);
+	portsc |= mode << 16;
+	writel(portsc, &udc->op_regs->portsc[0]);
+}
+
+static void prime_status_complete(struct usb_ep *ep, struct usb_request *_req)
+{
+	struct mv_udc *udc = the_controller;
+	struct mv_req *req = container_of(_req, struct mv_req, req);
+	unsigned long flags;
+
+	dev_info(&udc->dev->dev, "switch to test mode %d\n", req->test_mode);
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (req->test_mode) {
+		mv_set_ptc(udc, req->test_mode);
+		req->test_mode = 0;
+	}
+	spin_unlock_irqrestore(&udc->lock, flags);
+}
+
 static int
 udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty)
 {
@@ -1310,6 +1479,7 @@ udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty)
 
 	ep = &udc->eps[0];
 	udc->ep0_dir = direction;
+	udc->ep0_state = WAIT_FOR_OUT_STATUS;
 
 	req = udc->status_req;
 
@@ -1323,9 +1493,21 @@ udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty)
 	req->ep = ep;
 	req->req.status = -EINPROGRESS;
 	req->req.actual = 0;
-	req->req.complete = NULL;
+	if (udc->test_mode) {
+		req->req.complete = prime_status_complete;
+		req->test_mode = udc->test_mode;
+		udc->test_mode = 0;
+	} else
+		req->req.complete = NULL;
 	req->dtd_count = 0;
 
+	if (req->req.dma == DMA_ADDR_INVALID) {
+		req->req.dma = dma_map_single(ep->udc->gadget.dev.parent,
+				req->req.buf, req->req.length,
+				ep_dir(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		req->mapped = 1;
+	}
+
 	/* prime the data phase */
 	if (!req_to_dtd(req))
 		retval = queue_dtd(ep, req);
@@ -1346,6 +1528,17 @@ out:
 	return retval;
 }
 
+static void mv_udc_testmode(struct mv_udc *udc, u16 index)
+{
+	if (index <= TEST_FORCE_EN) {
+		udc->test_mode = index;
+		if (udc_prime_status(udc, EP_DIR_IN, 0, true))
+			ep0_stall(udc);
+	} else
+		dev_err(&udc->dev->dev,
+			"This test mode(%d) is not supported\n", index);
+}
+
 static void ch9setaddress(struct mv_udc *udc, struct usb_ctrlrequest *setup)
 {
 	udc->dev_addr = (u8)setup->wValue;
@@ -1360,7 +1553,7 @@ static void ch9setaddress(struct mv_udc *udc, struct usb_ctrlrequest *setup)
 static void ch9getstatus(struct mv_udc *udc, u8 ep_num,
 	struct usb_ctrlrequest *setup)
 {
-	u16 status;
+	u16 status = 0;
 	int retval;
 
 	if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
@@ -1388,6 +1581,8 @@ static void ch9getstatus(struct mv_udc *udc, u8 ep_num,
 	retval = udc_prime_status(udc, EP_DIR_IN, status, false);
 	if (retval)
 		ep0_stall(udc);
+	else
+		udc->ep0_state = DATA_STATE_XMIT;
 }
 
 static void ch9clearfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup)
@@ -1402,9 +1597,6 @@ static void ch9clearfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup)
 		case USB_DEVICE_REMOTE_WAKEUP:
 			udc->remote_wakeup = 0;
 			break;
-		case USB_DEVICE_TEST_MODE:
-			mv_udc_testmode(udc, 0, false);
-			break;
 		default:
 			goto out;
 		}
@@ -1433,8 +1625,6 @@ static void ch9clearfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup)
 
 	if (udc_prime_status(udc, EP_DIR_IN, 0, true))
 		ep0_stall(udc);
-	else
-		udc->ep0_state = DATA_STATE_XMIT;
 out:
 	return;
 }
@@ -1452,16 +1642,16 @@ static void ch9setfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup)
 			break;
 		case USB_DEVICE_TEST_MODE:
 			if (setup->wIndex & 0xFF
-				&& udc->gadget.speed != USB_SPEED_HIGH)
-				goto out;
-			if (udc->usb_state == USB_STATE_CONFIGURED
-				|| udc->usb_state == USB_STATE_ADDRESS
-				|| udc->usb_state == USB_STATE_DEFAULT)
-				mv_udc_testmode(udc,
-					setup->wIndex & 0xFF00, true);
-			else
-				goto out;
-			break;
+				||  udc->gadget.speed != USB_SPEED_HIGH)
+				ep0_stall(udc);
+
+			if (udc->usb_state != USB_STATE_CONFIGURED
+				&& udc->usb_state != USB_STATE_ADDRESS
+				&& udc->usb_state != USB_STATE_DEFAULT)
+				ep0_stall(udc);
+
+			mv_udc_testmode(udc, (setup->wIndex >> 8));
+			goto out;
 		default:
 			goto out;
 		}
@@ -1599,8 +1789,7 @@ static void get_setup_data(struct mv_udc *udc, u8 ep_num, u8 *buffer_ptr)
 	dqh = &udc->ep_dqh[ep_num * 2 + EP_DIR_OUT];
 
 	/* Clear bit in ENDPTSETUPSTAT */
-	temp = readl(&udc->op_regs->epsetupstat);
-	writel(temp | (1 << ep_num), &udc->op_regs->epsetupstat);
+	writel((1 << ep_num), &udc->op_regs->epsetupstat);
 
 	/* while a hazard exists when setup package arrives */
 	do {
@@ -1871,23 +2060,57 @@ static irqreturn_t mv_udc_irq(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t mv_udc_vbus_irq(int irq, void *dev)
+{
+	struct mv_udc *udc = (struct mv_udc *)dev;
+
+	/* polling VBUS and init phy may cause too much time*/
+	if (udc->qwork)
+		queue_work(udc->qwork, &udc->vbus_work);
+
+	return IRQ_HANDLED;
+}
+
+static void mv_udc_vbus_work(struct work_struct *work)
+{
+	struct mv_udc *udc;
+	unsigned int vbus;
+
+	udc = container_of(work, struct mv_udc, vbus_work);
+	if (!udc->pdata->vbus)
+		return;
+
+	vbus = udc->pdata->vbus->poll();
+	dev_info(&udc->dev->dev, "vbus is %d\n", vbus);
+
+	if (vbus == VBUS_HIGH)
+		mv_udc_vbus_session(&udc->gadget, 1);
+	else if (vbus == VBUS_LOW)
+		mv_udc_vbus_session(&udc->gadget, 0);
+}
+
 /* release device structure */
 static void gadget_release(struct device *_dev)
 {
 	struct mv_udc *udc = the_controller;
 
 	complete(udc->done);
-	kfree(udc);
 }
 
-static int mv_udc_remove(struct platform_device *dev)
+static int __devexit mv_udc_remove(struct platform_device *dev)
 {
 	struct mv_udc *udc = the_controller;
-	DECLARE_COMPLETION(done);
+	int clk_i;
 
 	usb_del_gadget_udc(&udc->gadget);
 
-	udc->done = &done;
+	if (udc->qwork) {
+		flush_workqueue(udc->qwork);
+		destroy_workqueue(udc->qwork);
+	}
+
+	if (udc->pdata && udc->pdata->vbus && udc->clock_gating)
+		free_irq(udc->pdata->vbus->irq, &dev->dev);
 
 	/* free memory allocated in probe */
 	if (udc->dtd_pool)
@@ -1902,6 +2125,8 @@ static int mv_udc_remove(struct platform_device *dev)
 	if (udc->irq)
 		free_irq(udc->irq, &dev->dev);
 
+	mv_udc_disable(udc);
+
 	if (udc->cap_regs)
 		iounmap(udc->cap_regs);
 	udc->cap_regs = NULL;
@@ -1915,45 +2140,62 @@ static int mv_udc_remove(struct platform_device *dev)
 		kfree(udc->status_req);
 	}
 
+	for (clk_i = 0; clk_i <= udc->clknum; clk_i++)
+		clk_put(udc->clk[clk_i]);
+
 	device_unregister(&udc->gadget.dev);
 
 	/* free dev, wait for the release() finished */
-	wait_for_completion(&done);
+	wait_for_completion(udc->done);
+	kfree(udc);
 
 	the_controller = NULL;
 
 	return 0;
 }
 
-int mv_udc_probe(struct platform_device *dev)
+static int __devinit mv_udc_probe(struct platform_device *dev)
 {
+	struct mv_usb_platform_data *pdata = dev->dev.platform_data;
 	struct mv_udc *udc;
 	int retval = 0;
+	int clk_i = 0;
 	struct resource *r;
 	size_t size;
 
-	udc = kzalloc(sizeof *udc, GFP_KERNEL);
+	if (pdata == NULL) {
+		dev_err(&dev->dev, "missing platform_data\n");
+		return -ENODEV;
+	}
+
+	size = sizeof(*udc) + sizeof(struct clk *) * pdata->clknum;
+	udc = kzalloc(size, GFP_KERNEL);
 	if (udc == NULL) {
 		dev_err(&dev->dev, "failed to allocate memory for udc\n");
-		retval = -ENOMEM;
-		goto error;
+		return -ENOMEM;
 	}
 
+	the_controller = udc;
+	udc->done = &release_done;
+	udc->pdata = dev->dev.platform_data;
 	spin_lock_init(&udc->lock);
 
 	udc->dev = dev;
 
-	udc->clk = clk_get(&dev->dev, "U2OCLK");
-	if (IS_ERR(udc->clk)) {
-		retval = PTR_ERR(udc->clk);
-		goto error;
+	udc->clknum = pdata->clknum;
+	for (clk_i = 0; clk_i < udc->clknum; clk_i++) {
+		udc->clk[clk_i] = clk_get(&dev->dev, pdata->clkname[clk_i]);
+		if (IS_ERR(udc->clk[clk_i])) {
+			retval = PTR_ERR(udc->clk[clk_i]);
+			goto err_put_clk;
+		}
 	}
 
-	r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "u2o");
+	r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "capregs");
 	if (r == NULL) {
 		dev_err(&dev->dev, "no I/O memory resource defined\n");
 		retval = -ENODEV;
-		goto error;
+		goto err_put_clk;
 	}
 
 	udc->cap_regs = (struct mv_cap_regs __iomem *)
@@ -1961,29 +2203,31 @@ int mv_udc_probe(struct platform_device *dev)
 	if (udc->cap_regs == NULL) {
 		dev_err(&dev->dev, "failed to map I/O memory\n");
 		retval = -EBUSY;
-		goto error;
+		goto err_put_clk;
 	}
 
-	r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "u2ophy");
+	r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "phyregs");
 	if (r == NULL) {
 		dev_err(&dev->dev, "no phy I/O memory resource defined\n");
 		retval = -ENODEV;
-		goto error;
+		goto err_iounmap_capreg;
 	}
 
 	udc->phy_regs = (unsigned int)ioremap(r->start, resource_size(r));
 	if (udc->phy_regs == 0) {
 		dev_err(&dev->dev, "failed to map phy I/O memory\n");
 		retval = -EBUSY;
-		goto error;
+		goto err_iounmap_capreg;
 	}
 
 	/* we will acces controller register, so enable the clk */
-	clk_enable(udc->clk);
-	retval = mv_udc_phy_init(udc->phy_regs);
-	if (retval) {
-		dev_err(&dev->dev, "phy initialization error %d\n", retval);
-		goto error;
+	udc_clock_enable(udc);
+	if (pdata->phy_init) {
+		retval = pdata->phy_init(udc->phy_regs);
+		if (retval) {
+			dev_err(&dev->dev, "phy init error %d\n", retval);
+			goto err_iounmap_phyreg;
+		}
 	}
 
 	udc->op_regs = (struct mv_op_regs __iomem *)((u32)udc->cap_regs
@@ -1991,6 +2235,13 @@ int mv_udc_probe(struct platform_device *dev)
 			& CAPLENGTH_MASK));
 	udc->max_eps = readl(&udc->cap_regs->dccparams) & DCCPARAMS_DEN_MASK;
 
+	/*
+	 * some platform will use usb to download image, it may not disconnect
+	 * usb gadget before loading kernel. So first stop udc here.
+	 */
+	udc_stop(udc);
+	writel(0xFFFFFFFF, &udc->op_regs->usbsts);
+
 	size = udc->max_eps * sizeof(struct mv_dqh) *2;
 	size = (size + DQH_ALIGNMENT - 1) & ~(DQH_ALIGNMENT - 1);
 	udc->ep_dqh = dma_alloc_coherent(&dev->dev, size,
@@ -1999,7 +2250,7 @@ int mv_udc_probe(struct platform_device *dev)
 	if (udc->ep_dqh == NULL) {
 		dev_err(&dev->dev, "allocate dQH memory failed\n");
 		retval = -ENOMEM;
-		goto error;
+		goto err_disable_clock;
 	}
 	udc->ep_dqh_size = size;
 
@@ -2012,7 +2263,7 @@ int mv_udc_probe(struct platform_device *dev)
 
 	if (!udc->dtd_pool) {
 		retval = -ENOMEM;
-		goto error;
+		goto err_free_dma;
 	}
 
 	size = udc->max_eps * sizeof(struct mv_ep) *2;
@@ -2020,7 +2271,7 @@ int mv_udc_probe(struct platform_device *dev)
 	if (udc->eps == NULL) {
 		dev_err(&dev->dev, "allocate ep memory failed\n");
 		retval = -ENOMEM;
-		goto error;
+		goto err_destroy_dma;
 	}
 
 	/* initialize ep0 status request structure */
@@ -2028,13 +2279,13 @@ int mv_udc_probe(struct platform_device *dev)
 	if (!udc->status_req) {
 		dev_err(&dev->dev, "allocate status_req memory failed\n");
 		retval = -ENOMEM;
-		goto error;
+		goto err_free_eps;
 	}
 	INIT_LIST_HEAD(&udc->status_req->queue);
 
 	/* allocate a small amount of memory to get valid address */
 	udc->status_req->req.buf = kzalloc(8, GFP_KERNEL);
-	udc->status_req->req.dma = virt_to_phys(udc->status_req->req.buf);
+	udc->status_req->req.dma = DMA_ADDR_INVALID;
 
 	udc->resume_state = USB_STATE_NOTATTACHED;
 	udc->usb_state = USB_STATE_POWERED;
@@ -2045,15 +2296,15 @@ int mv_udc_probe(struct platform_device *dev)
 	if (r == NULL) {
 		dev_err(&dev->dev, "no IRQ resource defined\n");
 		retval = -ENODEV;
-		goto error;
+		goto err_free_status_req;
 	}
 	udc->irq = r->start;
 	if (request_irq(udc->irq, mv_udc_irq,
-		IRQF_DISABLED | IRQF_SHARED, driver_name, udc)) {
+		IRQF_SHARED, driver_name, udc)) {
 		dev_err(&dev->dev, "Request irq %d for UDC failed\n",
 			udc->irq);
 		retval = -ENODEV;
-		goto error;
+		goto err_free_status_req;
 	}
 
 	/* initialize gadget structure */
@@ -2072,18 +2323,82 @@ int mv_udc_probe(struct platform_device *dev)
 
 	retval = device_register(&udc->gadget.dev);
 	if (retval)
-		goto error;
+		goto err_free_irq;
 
 	eps_init(udc);
 
-	the_controller = udc;
+	/* VBUS detect: we can disable/enable clock on demand.*/
+	if (pdata->vbus) {
+		udc->clock_gating = 1;
+		retval = request_threaded_irq(pdata->vbus->irq, NULL,
+				mv_udc_vbus_irq, IRQF_ONESHOT, "vbus", udc);
+		if (retval) {
+			dev_info(&dev->dev,
+				"Can not request irq for VBUS, "
+				"disable clock gating\n");
+			udc->clock_gating = 0;
+		}
+
+		udc->qwork = create_singlethread_workqueue("mv_udc_queue");
+		if (!udc->qwork) {
+			dev_err(&dev->dev, "cannot create workqueue\n");
+			retval = -ENOMEM;
+			goto err_unregister;
+		}
+
+		INIT_WORK(&udc->vbus_work, mv_udc_vbus_work);
+	}
+
+	/*
+	 * When clock gating is supported, we can disable clk and phy.
+	 * If not, it means that VBUS detection is not supported, we
+	 * have to enable vbus active all the time to let controller work.
+	 */
+	if (udc->clock_gating) {
+		if (udc->pdata->phy_deinit)
+			udc->pdata->phy_deinit(udc->phy_regs);
+		udc_clock_disable(udc);
+	} else
+		udc->vbus_active = 1;
 
 	retval = usb_add_gadget_udc(&dev->dev, &udc->gadget);
-	if (!retval)
-		return retval;
-error:
-	if (udc)
-		mv_udc_remove(udc->dev);
+	if (retval)
+		goto err_unregister;
+
+	dev_info(&dev->dev, "successful probe UDC device %s clock gating.\n",
+		udc->clock_gating ? "with" : "without");
+
+	return 0;
+
+err_unregister:
+	if (udc->pdata && udc->pdata->vbus && udc->clock_gating)
+		free_irq(pdata->vbus->irq, &dev->dev);
+	device_unregister(&udc->gadget.dev);
+err_free_irq:
+	free_irq(udc->irq, &dev->dev);
+err_free_status_req:
+	kfree(udc->status_req->req.buf);
+	kfree(udc->status_req);
+err_free_eps:
+	kfree(udc->eps);
+err_destroy_dma:
+	dma_pool_destroy(udc->dtd_pool);
+err_free_dma:
+	dma_free_coherent(&dev->dev, udc->ep_dqh_size,
+			udc->ep_dqh, udc->ep_dqh_dma);
+err_disable_clock:
+	if (udc->pdata->phy_deinit)
+		udc->pdata->phy_deinit(udc->phy_regs);
+	udc_clock_disable(udc);
+err_iounmap_phyreg:
+	iounmap((void *)udc->phy_regs);
+err_iounmap_capreg:
+	iounmap(udc->cap_regs);
+err_put_clk:
+	for (clk_i--; clk_i >= 0; clk_i--)
+		clk_put(udc->clk[clk_i]);
+	the_controller = NULL;
+	kfree(udc);
 	return retval;
 }
 
@@ -2102,11 +2417,16 @@ static int mv_udc_resume(struct device *_dev)
 	struct mv_udc *udc = the_controller;
 	int retval;
 
-	retval = mv_udc_phy_init(udc->phy_regs);
-	if (retval) {
-		dev_err(_dev, "phy initialization error %d\n", retval);
-		return retval;
+	if (udc->pdata->phy_init) {
+		retval = udc->pdata->phy_init(udc->phy_regs);
+		if (retval) {
+			dev_err(&udc->dev->dev,
+				"init phy error %d when resume back\n",
+				retval);
+			return retval;
+		}
 	}
+
 	udc_reset(udc);
 	ep0_reset(udc);
 	udc_start(udc);
@@ -2120,9 +2440,21 @@ static const struct dev_pm_ops mv_udc_pm_ops = {
 };
 #endif
 
+static void mv_udc_shutdown(struct platform_device *dev)
+{
+	struct mv_udc *udc = the_controller;
+	u32 mode;
+
+	/* reset controller mode to IDLE */
+	mode = readl(&udc->op_regs->usbmode);
+	mode &= ~3;
+	writel(mode, &udc->op_regs->usbmode);
+}
+
 static struct platform_driver udc_driver = {
 	.probe		= mv_udc_probe,
 	.remove		= __exit_p(mv_udc_remove),
+	.shutdown	= mv_udc_shutdown,
 	.driver		= {
 		.owner	= THIS_MODULE,
 		.name	= "pxa-u2o",
diff --git a/drivers/usb/gadget/mv_udc_phy.c b/drivers/usb/gadget/mv_udc_phy.c
deleted file mode 100644
index d4dea97..0000000
--- a/drivers/usb/gadget/mv_udc_phy.c
+++ /dev/null
@@ -1,214 +0,0 @@
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-#include <linux/errno.h>
-
-#include <mach/cputype.h>
-
-#ifdef CONFIG_ARCH_MMP
-
-#define UTMI_REVISION		0x0
-#define UTMI_CTRL		0x4
-#define UTMI_PLL		0x8
-#define UTMI_TX			0xc
-#define UTMI_RX			0x10
-#define UTMI_IVREF		0x14
-#define UTMI_T0			0x18
-#define UTMI_T1			0x1c
-#define UTMI_T2			0x20
-#define UTMI_T3			0x24
-#define UTMI_T4			0x28
-#define UTMI_T5			0x2c
-#define UTMI_RESERVE		0x30
-#define UTMI_USB_INT		0x34
-#define UTMI_DBG_CTL		0x38
-#define UTMI_OTG_ADDON		0x3c
-
-/* For UTMICTRL Register */
-#define UTMI_CTRL_USB_CLK_EN			(1 << 31)
-/* pxa168 */
-#define UTMI_CTRL_SUSPEND_SET1			(1 << 30)
-#define UTMI_CTRL_SUSPEND_SET2			(1 << 29)
-#define UTMI_CTRL_RXBUF_PDWN			(1 << 24)
-#define UTMI_CTRL_TXBUF_PDWN			(1 << 11)
-
-#define UTMI_CTRL_INPKT_DELAY_SHIFT		30
-#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT		28
-#define UTMI_CTRL_PU_REF_SHIFT			20
-#define UTMI_CTRL_ARC_PULLDN_SHIFT		12
-#define UTMI_CTRL_PLL_PWR_UP_SHIFT		1
-#define UTMI_CTRL_PWR_UP_SHIFT			0
-/* For UTMI_PLL Register */
-#define UTMI_PLL_CLK_BLK_EN_SHIFT		24
-#define UTMI_PLL_FBDIV_SHIFT			4
-#define UTMI_PLL_REFDIV_SHIFT			0
-#define UTMI_PLL_FBDIV_MASK			0x00000FF0
-#define UTMI_PLL_REFDIV_MASK			0x0000000F
-#define UTMI_PLL_ICP_MASK			0x00007000
-#define UTMI_PLL_KVCO_MASK			0x00031000
-#define UTMI_PLL_PLLCALI12_SHIFT		29
-#define UTMI_PLL_PLLCALI12_MASK			(0x3 << 29)
-#define UTMI_PLL_PLLVDD18_SHIFT			27
-#define UTMI_PLL_PLLVDD18_MASK			(0x3 << 27)
-#define UTMI_PLL_PLLVDD12_SHIFT			25
-#define UTMI_PLL_PLLVDD12_MASK			(0x3 << 25)
-#define UTMI_PLL_KVCO_SHIFT			15
-#define UTMI_PLL_ICP_SHIFT			12
-/* For UTMI_TX Register */
-#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT		27
-#define UTMI_TX_REG_EXT_FS_RCAL_MASK		(0xf << 27)
-#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK		26
-#define UTMI_TX_REG_EXT_FS_RCAL_EN		(0x1 << 26)
-#define UTMI_TX_LOW_VDD_EN_SHIFT		11
-#define UTMI_TX_IMPCAL_VTH_SHIFT		14
-#define UTMI_TX_IMPCAL_VTH_MASK			(0x7 << 14)
-#define UTMI_TX_CK60_PHSEL_SHIFT		17
-#define UTMI_TX_CK60_PHSEL_MASK			(0xf << 17)
-#define UTMI_TX_TXVDD12_SHIFT                   22
-#define UTMI_TX_TXVDD12_MASK			(0x3 << 22)
-#define UTMI_TX_AMP_SHIFT			0
-#define UTMI_TX_AMP_MASK			(0x7 << 0)
-/* For UTMI_RX Register */
-#define UTMI_RX_SQ_THRESH_SHIFT			4
-#define UTMI_RX_SQ_THRESH_MASK			(0xf << 4)
-#define UTMI_REG_SQ_LENGTH_SHIFT		15
-#define UTMI_REG_SQ_LENGTH_MASK			(0x3 << 15)
-
-#define REG_RCAL_START				0x00001000
-#define VCOCAL_START				0x00200000
-#define KVCO_EXT				0x00400000
-#define PLL_READY				0x00800000
-#define CLK_BLK_EN				0x01000000
-#endif
-
-static unsigned int u2o_read(unsigned int base, unsigned int offset)
-{
-	return readl(base + offset);
-}
-
-static void u2o_set(unsigned int base, unsigned int offset, unsigned int value)
-{
-	unsigned int reg;
-
-	reg = readl(base + offset);
-	reg |= value;
-	writel(reg, base + offset);
-	readl(base + offset);
-}
-
-static void u2o_clear(unsigned int base, unsigned int offset,
-	unsigned int value)
-{
-	unsigned int reg;
-
-	reg = readl(base + offset);
-	reg &= ~value;
-	writel(reg, base + offset);
-	readl(base + offset);
-}
-
-static void u2o_write(unsigned int base, unsigned int offset,
-	unsigned int value)
-{
-	writel(value, base + offset);
-	readl(base + offset);
-}
-
-#ifdef CONFIG_ARCH_MMP
-int mv_udc_phy_init(unsigned int base)
-{
-	unsigned long timeout;
-
-	/* Initialize the USB PHY power */
-	if (cpu_is_pxa910()) {
-		u2o_set(base, UTMI_CTRL, (1 << UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
-			| (1 << UTMI_CTRL_PU_REF_SHIFT));
-	}
-
-	u2o_set(base, UTMI_CTRL, 1 << UTMI_CTRL_PLL_PWR_UP_SHIFT);
-	u2o_set(base, UTMI_CTRL, 1 << UTMI_CTRL_PWR_UP_SHIFT);
-
-	/* UTMI_PLL settings */
-	u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
-		| UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
-		| UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
-		| UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
-
-	u2o_set(base, UTMI_PLL, (0xee << UTMI_PLL_FBDIV_SHIFT)
-		| (0xb << UTMI_PLL_REFDIV_SHIFT)
-		| (3 << UTMI_PLL_PLLVDD18_SHIFT)
-		| (3 << UTMI_PLL_PLLVDD12_SHIFT)
-		| (3 << UTMI_PLL_PLLCALI12_SHIFT)
-		| (1 << UTMI_PLL_ICP_SHIFT) | (3 << UTMI_PLL_KVCO_SHIFT));
-
-	/* UTMI_TX */
-	u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
-		| UTMI_TX_TXVDD12_MASK
-		| UTMI_TX_CK60_PHSEL_MASK | UTMI_TX_IMPCAL_VTH_MASK
-		| UTMI_TX_REG_EXT_FS_RCAL_MASK | UTMI_TX_AMP_MASK);
-	u2o_set(base, UTMI_TX, (3 << UTMI_TX_TXVDD12_SHIFT)
-		| (4 << UTMI_TX_CK60_PHSEL_SHIFT)
-		| (4 << UTMI_TX_IMPCAL_VTH_SHIFT)
-		| (8 << UTMI_TX_REG_EXT_FS_RCAL_SHIFT)
-		| (3 << UTMI_TX_AMP_SHIFT));
-
-	/* UTMI_RX */
-	u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
-		| UTMI_REG_SQ_LENGTH_MASK);
-	if (cpu_is_pxa168())
-		u2o_set(base, UTMI_RX, (7 << UTMI_RX_SQ_THRESH_SHIFT)
-			| (2 << UTMI_REG_SQ_LENGTH_SHIFT));
-	else
-		u2o_set(base, UTMI_RX, (0x7 << UTMI_RX_SQ_THRESH_SHIFT)
-			| (2 << UTMI_REG_SQ_LENGTH_SHIFT));
-
-	/* UTMI_IVREF */
-	if (cpu_is_pxa168())
-		/*
-		 * fixing Microsoft Altair board interface with NEC hub issue -
-		 * Set UTMI_IVREF from 0x4a3 to 0x4bf
-		 */
-		u2o_write(base, UTMI_IVREF, 0x4bf);
-
-	/* calibrate */
-	timeout = jiffies + 100;
-	while ((u2o_read(base, UTMI_PLL) & PLL_READY) == 0) {
-		if (time_after(jiffies, timeout))
-			return -ETIME;
-		cpu_relax();
-	}
-
-	/* toggle VCOCAL_START bit of UTMI_PLL */
-	udelay(200);
-	u2o_set(base, UTMI_PLL, VCOCAL_START);
-	udelay(40);
-	u2o_clear(base, UTMI_PLL, VCOCAL_START);
-
-	/* toggle REG_RCAL_START bit of UTMI_TX */
-	udelay(200);
-	u2o_set(base, UTMI_TX, REG_RCAL_START);
-	udelay(40);
-	u2o_clear(base, UTMI_TX, REG_RCAL_START);
-	udelay(200);
-
-	/* make sure phy is ready */
-	timeout = jiffies + 100;
-	while ((u2o_read(base, UTMI_PLL) & PLL_READY) == 0) {
-		if (time_after(jiffies, timeout))
-			return -ETIME;
-		cpu_relax();
-	}
-
-	if (cpu_is_pxa168()) {
-		u2o_set(base, UTMI_RESERVE, 1 << 5);
-		/* Turn on UTMI PHY OTG extension */
-		u2o_write(base, UTMI_OTG_ADDON, 1);
-	}
-	return 0;
-}
-#else
-int mv_udc_phy_init(unsigned int base)
-{
-	return 0;
-}
-#endif
diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c
index 62ee508..8953003 100644
--- a/drivers/usb/gadget/ncm.c
+++ b/drivers/usb/gadget/ncm.c
@@ -14,15 +14,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 /* #define DEBUG */
diff --git a/drivers/usb/gadget/ndis.h b/drivers/usb/gadget/ndis.h
index df886ce..b0e52fc 100644
--- a/drivers/usb/gadget/ndis.h
+++ b/drivers/usb/gadget/ndis.h
@@ -10,12 +10,6 @@
  *
  * This source code is offered for use in the public domain. You may
  * use, modify or distribute it freely.
- *
- * This code is distributed in the hope that it will be useful but
- * WITHOUT ANY WARRANTY. ALL WARRANTIES, EXPRESS OR IMPLIED ARE HEREBY
- * DISCLAIMED. This includes but is not limited to warranties of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
  */
 
 #ifndef _LINUX_NDIS_H
diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c
index ab98ea9..d1b7636 100644
--- a/drivers/usb/gadget/net2272.c
+++ b/drivers/usb/gadget/net2272.c
@@ -204,7 +204,7 @@ net2272_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
 		return -ESHUTDOWN;
 
-	max = le16_to_cpu(desc->wMaxPacketSize) & 0x1fff;
+	max = usb_endpoint_maxp(desc) & 0x1fff;
 
 	spin_lock_irqsave(&dev->lock, flags);
 	_ep->maxpacket = max & 0x7fff;
@@ -1172,17 +1172,18 @@ net2272_pullup(struct usb_gadget *_gadget, int is_on)
 	return 0;
 }
 
-static int net2272_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
-static int net2272_stop(struct usb_gadget_driver *driver);
+static int net2272_start(struct usb_gadget *_gadget,
+		struct usb_gadget_driver *driver);
+static int net2272_stop(struct usb_gadget *_gadget,
+		struct usb_gadget_driver *driver);
 
 static const struct usb_gadget_ops net2272_ops = {
-	.get_frame       = net2272_get_frame,
-	.wakeup          = net2272_wakeup,
+	.get_frame	= net2272_get_frame,
+	.wakeup		= net2272_wakeup,
 	.set_selfpowered = net2272_set_selfpowered,
-	.pullup			= net2272_pullup,
-	.start			= net2272_start,
-	.stop			= net2272_stop,
+	.pullup		= net2272_pullup,
+	.udc_start	= net2272_start,
+	.udc_stop	= net2272_stop,
 };
 
 /*---------------------------------------------------------------------------*/
@@ -1356,8 +1357,6 @@ net2272_set_fifo_mode(struct net2272 *dev, int mode)
 
 /*---------------------------------------------------------------------------*/
 
-static struct net2272 *the_controller;
-
 static void
 net2272_usb_reset(struct net2272 *dev)
 {
@@ -1453,20 +1452,17 @@ net2272_ep0_start(struct net2272 *dev)
  * disconnect is reported.  then a host may connect again, or
  * the driver might get unbound.
  */
-static int net2272_start(struct usb_gadget_driver *driver,
-	int (*bind)(struct usb_gadget *))
+static int net2272_start(struct usb_gadget *_gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct net2272 *dev = the_controller;
-	int ret;
+	struct net2272 *dev;
 	unsigned i;
 
-	if (!driver || !bind || !driver->unbind || !driver->setup ||
+	if (!driver || !driver->unbind || !driver->setup ||
 	    driver->speed != USB_SPEED_HIGH)
 		return -EINVAL;
-	if (!dev)
-		return -ENODEV;
-	if (dev->driver)
-		return -EBUSY;
+
+	dev = container_of(_gadget, struct net2272, gadget);
 
 	for (i = 0; i < 4; ++i)
 		dev->ep[i].irqs = 0;
@@ -1475,14 +1471,6 @@ static int net2272_start(struct usb_gadget_driver *driver,
 	driver->driver.bus = NULL;
 	dev->driver = driver;
 	dev->gadget.dev.driver = &driver->driver;
-	ret = bind(&dev->gadget);
-	if (ret) {
-		dev_dbg(dev->dev, "bind to driver %s --> %d\n",
-			driver->driver.name, ret);
-		dev->driver = NULL;
-		dev->gadget.dev.driver = NULL;
-		return ret;
-	}
 
 	/* ... then enable host detection and ep0; and we're ready
 	 * for set_configuration as well as eventual disconnect.
@@ -1510,33 +1498,21 @@ stop_activity(struct net2272 *dev, struct usb_gadget_driver *driver)
 	for (i = 0; i < 4; ++i)
 		net2272_dequeue_all(&dev->ep[i]);
 
-	/* report disconnect; the driver is already quiesced */
-	if (driver) {
-		spin_unlock(&dev->lock);
-		driver->disconnect(&dev->gadget);
-		spin_lock(&dev->lock);
-
-	}
 	net2272_usb_reinit(dev);
 }
 
-static int net2272_stop(struct usb_gadget_driver *driver)
+static int net2272_stop(struct usb_gadget *_gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct net2272 *dev = the_controller;
+	struct net2272 *dev;
 	unsigned long flags;
 
-	if (!dev)
-		return -ENODEV;
-	if (!driver || driver != dev->driver)
-		return -EINVAL;
+	dev = container_of(_gadget, struct net2272, gadget);
 
 	spin_lock_irqsave(&dev->lock, flags);
 	stop_activity(dev, driver);
 	spin_unlock_irqrestore(&dev->lock, flags);
 
-	net2272_pullup(&dev->gadget, 0);
-
-	driver->unbind(&dev->gadget);
 	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
 
@@ -1764,8 +1740,8 @@ net2272_handle_stat0_irqs(struct net2272 *dev, u8 stat)
 				dev->gadget.speed = USB_SPEED_HIGH;
 			else
 				dev->gadget.speed = USB_SPEED_FULL;
-			dev_dbg(dev->dev, "%s speed\n",
-				(dev->gadget.speed == USB_SPEED_HIGH) ? "high" : "full");
+			dev_dbg(dev->dev, "%s\n",
+				usb_speed_string(dev->gadget.speed));
 		}
 
 		ep = &dev->ep[0];
@@ -2238,7 +2214,6 @@ net2272_remove(struct net2272 *dev)
 	device_remove_file(dev->dev, &dev_attr_registers);
 
 	dev_info(dev->dev, "unbind\n");
-	the_controller = NULL;
 }
 
 static struct net2272 * __devinit
@@ -2246,11 +2221,6 @@ net2272_probe_init(struct device *dev, unsigned int irq)
 {
 	struct net2272 *ret;
 
-	if (the_controller) {
-		dev_warn(dev, "ignoring\n");
-		return ERR_PTR(-EBUSY);
-	}
-
 	if (!irq) {
 		dev_dbg(dev, "No IRQ!\n");
 		return ERR_PTR(-ENODEV);
@@ -2307,8 +2277,6 @@ net2272_probe_fin(struct net2272 *dev, unsigned int irqflags)
 		dma_mode_string());
 	dev_info(dev->dev, "version: %s\n", driver_vers);
 
-	the_controller = dev;
-
 	ret = device_register(&dev->gadget.dev);
 	if (ret)
 		goto err_irq;
@@ -2684,8 +2652,6 @@ net2272_plat_probe(struct platform_device *pdev)
 	dev_info(&pdev->dev, "running in 16-bit, %sbyte swap local bus mode\n",
 		(net2272_read(dev, LOCCTL) & (1 << BYTE_SWAP)) ? "" : "no ");
 
-	the_controller = dev;
-
 	return 0;
 
  err_io:
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index a218a4d..7f1bc9a 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -33,15 +33,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #undef	DEBUG		/* messages on error and most fault paths */
@@ -169,7 +160,7 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 		return -EDOM;
 
 	/* sanity check ep-e/ep-f since their fifos are small */
-	max = le16_to_cpu (desc->wMaxPacketSize) & 0x1fff;
+	max = usb_endpoint_maxp (desc) & 0x1fff;
 	if (ep->num > 4 && max > 64)
 		return -ERANGE;
 
@@ -1410,17 +1401,18 @@ static int net2280_pullup(struct usb_gadget *_gadget, int is_on)
 	return 0;
 }
 
-static int net2280_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
-static int net2280_stop(struct usb_gadget_driver *driver);
+static int net2280_start(struct usb_gadget *_gadget,
+		struct usb_gadget_driver *driver);
+static int net2280_stop(struct usb_gadget *_gadget,
+		struct usb_gadget_driver *driver);
 
 static const struct usb_gadget_ops net2280_ops = {
 	.get_frame	= net2280_get_frame,
 	.wakeup		= net2280_wakeup,
 	.set_selfpowered = net2280_set_selfpowered,
 	.pullup		= net2280_pullup,
-	.start		= net2280_start,
-	.stop		= net2280_stop,
+	.udc_start	= net2280_start,
+	.udc_stop	= net2280_stop,
 };
 
 /*-------------------------------------------------------------------------*/
@@ -1640,7 +1632,7 @@ show_queues (struct device *_dev, struct device_attribute *attr, char *buf)
 				 default:
 					val = "iso"; break;
 				 }; val; }),
-				le16_to_cpu (d->wMaxPacketSize) & 0x1fff,
+				usb_endpoint_maxp (d) & 0x1fff,
 				ep->dma ? "dma" : "pio", ep->fifo_size
 				);
 		} else /* ep0 should only have one transfer queued */
@@ -1753,8 +1745,6 @@ static void set_fifo_mode (struct net2280 *dev, int mode)
  * perhaps to bind specific drivers to specific devices.
  */
 
-static struct net2280	*the_controller;
-
 static void usb_reset (struct net2280 *dev)
 {
 	u32	tmp;
@@ -1880,10 +1870,10 @@ static void ep0_start (struct net2280 *dev)
  * disconnect is reported.  then a host may connect again, or
  * the driver might get unbound.
  */
-static int net2280_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+static int net2280_start(struct usb_gadget *_gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct net2280		*dev = the_controller;
+	struct net2280		*dev;
 	int			retval;
 	unsigned		i;
 
@@ -1891,14 +1881,11 @@ static int net2280_start(struct usb_gadget_driver *driver,
 	 * (dev->usb->xcvrdiag & FORCE_FULL_SPEED_MODE)
 	 * "must not be used in normal operation"
 	 */
-	if (!driver
-			|| driver->speed != USB_SPEED_HIGH
-			|| !bind || !driver->setup)
+	if (!driver || driver->speed != USB_SPEED_HIGH
+			|| !driver->setup)
 		return -EINVAL;
-	if (!dev)
-		return -ENODEV;
-	if (dev->driver)
-		return -EBUSY;
+
+	dev = container_of (_gadget, struct net2280, gadget);
 
 	for (i = 0; i < 7; i++)
 		dev->ep [i].irqs = 0;
@@ -1908,14 +1895,6 @@ static int net2280_start(struct usb_gadget_driver *driver,
 	driver->driver.bus = NULL;
 	dev->driver = driver;
 	dev->gadget.dev.driver = &driver->driver;
-	retval = bind(&dev->gadget);
-	if (retval) {
-		DEBUG (dev, "bind to driver %s --> %d\n",
-				driver->driver.name, retval);
-		dev->driver = NULL;
-		dev->gadget.dev.driver = NULL;
-		return retval;
-	}
 
 	retval = device_create_file (&dev->pdev->dev, &dev_attr_function);
 	if (retval) goto err_unbind;
@@ -1961,33 +1940,21 @@ stop_activity (struct net2280 *dev, struct usb_gadget_driver *driver)
 	for (i = 0; i < 7; i++)
 		nuke (&dev->ep [i]);
 
-	/* report disconnect; the driver is already quiesced */
-	if (driver) {
-		spin_unlock (&dev->lock);
-		driver->disconnect (&dev->gadget);
-		spin_lock (&dev->lock);
-	}
-
 	usb_reinit (dev);
 }
 
-static int net2280_stop(struct usb_gadget_driver *driver)
+static int net2280_stop(struct usb_gadget *_gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct net2280	*dev = the_controller;
+	struct net2280	*dev;
 	unsigned long	flags;
 
-	if (!dev)
-		return -ENODEV;
-	if (!driver || driver != dev->driver || !driver->unbind)
-		return -EINVAL;
+	dev = container_of (_gadget, struct net2280, gadget);
 
 	spin_lock_irqsave (&dev->lock, flags);
 	stop_activity (dev, driver);
 	spin_unlock_irqrestore (&dev->lock, flags);
 
-	net2280_pullup (&dev->gadget, 0);
-
-	driver->unbind (&dev->gadget);
 	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
 
@@ -2266,9 +2233,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
 			else
 				dev->gadget.speed = USB_SPEED_FULL;
 			net2280_led_speed (dev, dev->gadget.speed);
-			DEBUG (dev, "%s speed\n",
-				(dev->gadget.speed == USB_SPEED_HIGH)
-					? "high" : "full");
+			DEBUG(dev, "%s\n", usb_speed_string(dev->gadget.speed));
 		}
 
 		ep = &dev->ep [0];
@@ -2709,8 +2674,6 @@ static void net2280_remove (struct pci_dev *pdev)
 	pci_set_drvdata (pdev, NULL);
 
 	INFO (dev, "unbind\n");
-
-	the_controller = NULL;
 }
 
 /* wrap this driver around the specified device, but
@@ -2724,14 +2687,6 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
 	void			__iomem *base = NULL;
 	int			retval, i;
 
-	/* if you want to support more than one controller in a system,
-	 * usb_gadget_driver_{register,unregister}() must change.
-	 */
-	if (the_controller) {
-		dev_warn (&pdev->dev, "ignoring\n");
-		return -EBUSY;
-	}
-
 	/* alloc, and start init */
 	dev = kzalloc (sizeof *dev, GFP_KERNEL);
 	if (dev == NULL){
@@ -2858,8 +2813,6 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
 			use_dma
 				? (use_dma_chaining ? "chaining" : "enabled")
 				: "disabled");
-	the_controller = dev;
-
 	retval = device_register (&dev->gadget.dev);
 	if (retval) goto done;
 	retval = device_create_file (&pdev->dev, &dev_attr_registers);
diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/net2280.h
index c368522..a844be0 100644
--- a/drivers/usb/gadget/net2280.h
+++ b/drivers/usb/gadget/net2280.h
@@ -11,15 +11,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/usb/net2280.h>
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 740c7da..788989a 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -10,15 +10,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #undef	DEBUG
@@ -166,15 +157,14 @@ static int omap_ep_enable(struct usb_ep *_ep,
 	if (!_ep || !desc || ep->desc
 			|| desc->bDescriptorType != USB_DT_ENDPOINT
 			|| ep->bEndpointAddress != desc->bEndpointAddress
-			|| ep->maxpacket < le16_to_cpu
-						(desc->wMaxPacketSize)) {
+			|| ep->maxpacket < usb_endpoint_maxp(desc)) {
 		DBG("%s, bad ep or descriptor\n", __func__);
 		return -EINVAL;
 	}
-	maxp = le16_to_cpu (desc->wMaxPacketSize);
+	maxp = usb_endpoint_maxp(desc);
 	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
 				&& maxp != ep->maxpacket)
-			|| le16_to_cpu(desc->wMaxPacketSize) > ep->maxpacket
+			|| usb_endpoint_maxp(desc) > ep->maxpacket
 			|| !desc->wMaxPacketSize) {
 		DBG("%s, bad %s maxpacket\n", __func__, _ep->name);
 		return -ERANGE;
@@ -2968,7 +2958,7 @@ known:
 	}
 #ifdef	USE_ISO
 	status = request_irq(pdev->resource[3].start, omap_udc_iso_irq,
-			IRQF_DISABLED, "omap_udc iso", udc);
+			0, "omap_udc iso", udc);
 	if (status != 0) {
 		ERR("can't get irq %d, err %d\n",
 			(int) pdev->resource[3].start, status);
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index f96615a..550d6dc 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -4,15 +4,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  */
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 #include <linux/kernel.h>
@@ -947,7 +938,7 @@ static void pch_udc_ep_enable(struct pch_udc_ep *ep,
 	else
 		buff_size = UDC_EPOUT_BUFF_SIZE;
 	pch_udc_ep_set_bufsz(ep, buff_size, ep->in);
-	pch_udc_ep_set_maxpkt(ep, le16_to_cpu(desc->wMaxPacketSize));
+	pch_udc_ep_set_maxpkt(ep, usb_endpoint_maxp(desc));
 	pch_udc_ep_set_nak(ep);
 	pch_udc_ep_fifo_flush(ep, ep->in);
 	/* Configure the endpoint */
@@ -957,7 +948,7 @@ static void pch_udc_ep_enable(struct pch_udc_ep *ep,
 	      (cfg->cur_cfg << UDC_CSR_NE_CFG_SHIFT) |
 	      (cfg->cur_intf << UDC_CSR_NE_INTF_SHIFT) |
 	      (cfg->cur_alt << UDC_CSR_NE_ALT_SHIFT) |
-	      le16_to_cpu(desc->wMaxPacketSize) << UDC_CSR_NE_MAX_PKT_SHIFT;
+	      usb_endpoint_maxp(desc) << UDC_CSR_NE_MAX_PKT_SHIFT;
 
 	if (ep->in)
 		pch_udc_write_csr(ep->dev, val, UDC_EPIN_IDX(ep->num));
@@ -1466,7 +1457,7 @@ static int pch_udc_pcd_ep_enable(struct usb_ep *usbep,
 	ep->desc = desc;
 	ep->halted = 0;
 	pch_udc_ep_enable(ep, &ep->dev->cfg_data, desc);
-	ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	ep->ep.maxpacket = usb_endpoint_maxp(desc);
 	pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
 	spin_unlock_irqrestore(&dev->lock, iflags);
 	return 0;
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index a341dde..65a8834 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -8,15 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/module.h>
@@ -971,23 +962,15 @@ printer_set_config(struct printer_dev *dev, unsigned number)
 		usb_gadget_vbus_draw(dev->gadget,
 				dev->gadget->is_otg ? 8 : 100);
 	} else {
-		char *speed;
 		unsigned power;
 
 		power = 2 * config_desc.bMaxPower;
 		usb_gadget_vbus_draw(dev->gadget, power);
 
-		switch (gadget->speed) {
-		case USB_SPEED_FULL:	speed = "full"; break;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-		case USB_SPEED_HIGH:	speed = "high"; break;
-#endif
-		default:		speed = "?"; break;
-		}
-
 		dev->config = number;
-		INFO(dev, "%s speed config #%d: %d mA, %s\n",
-				speed, number, power, driver_desc);
+		INFO(dev, "%s config #%d: %d mA, %s\n",
+		     usb_speed_string(gadget->speed),
+		     number, power, driver_desc);
 	}
 	return result;
 }
@@ -1611,7 +1594,7 @@ cleanup(void)
 	if (status)
 		ERROR(dev, "usb_gadget_unregister_driver %x\n", status);
 
-	unregister_chrdev_region(g_printer_devno, 2);
+	unregister_chrdev_region(g_printer_devno, 1);
 	class_destroy(usb_gadget_class);
 	mutex_unlock(&usb_printer_gadget.lock_printer_io);
 }
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index e4e59b4..c090a7e 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -11,16 +11,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 /* #define VERBOSE_DEBUG */
@@ -232,8 +222,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep,
 	if (!_ep || !desc || ep->desc || _ep->name == ep0name
 			|| desc->bDescriptorType != USB_DT_ENDPOINT
 			|| ep->bEndpointAddress != desc->bEndpointAddress
-			|| ep->fifo_size < le16_to_cpu
-						(desc->wMaxPacketSize)) {
+			|| ep->fifo_size < usb_endpoint_maxp (desc)) {
 		DMSG("%s, bad ep or descriptor\n", __func__);
 		return -EINVAL;
 	}
@@ -248,7 +237,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep,
 
 	/* hardware _could_ do smaller, but driver doesn't */
 	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
-				&& le16_to_cpu (desc->wMaxPacketSize)
+				&& usb_endpoint_maxp (desc)
 						!= BULK_FIFO_SIZE)
 			|| !desc->wMaxPacketSize) {
 		DMSG("%s, bad %s maxpacket\n", __func__, _ep->name);
@@ -264,7 +253,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep,
 	ep->desc = desc;
 	ep->stopped = 0;
 	ep->pio_irqs = 0;
-	ep->ep.maxpacket = le16_to_cpu (desc->wMaxPacketSize);
+	ep->ep.maxpacket = usb_endpoint_maxp (desc);
 
 	/* flush fifo (mostly for OUT buffers) */
 	pxa25x_ep_fifo_flush (_ep);
@@ -401,7 +390,7 @@ write_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
 {
 	unsigned		max;
 
-	max = le16_to_cpu(ep->desc->wMaxPacketSize);
+	max = usb_endpoint_maxp(ep->desc);
 	do {
 		unsigned	count;
 		int		is_last, is_short;
@@ -671,8 +660,7 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	 * we can report per-packet status.  that also helps with dma.
 	 */
 	if (unlikely (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
-			&& req->req.length > le16_to_cpu
-						(ep->desc->wMaxPacketSize)))
+		        && req->req.length > usb_endpoint_maxp (ep->desc)))
 		return -EMSGSIZE;
 
 	DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n",
@@ -1105,7 +1093,7 @@ udc_seq_show(struct seq_file *m, void *_d)
 			tmp = *dev->ep [i].reg_udccs;
 			seq_printf(m,
 				"%s max %d %s udccs %02x irqs %lu\n",
-				ep->ep.name, le16_to_cpu(desc->wMaxPacketSize),
+				ep->ep.name, usb_endpoint_maxp(desc),
 				"pio", tmp, ep->pio_irqs);
 			/* TODO translate all five groups of udccs bits! */
 
@@ -2202,7 +2190,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 
 	/* irq setup after old hardware state is cleaned up */
 	retval = request_irq(irq, pxa25x_udc_irq,
-			IRQF_DISABLED, driver_name, dev);
+			0, driver_name, dev);
 	if (retval != 0) {
 		pr_err("%s: can't get irq %d, err %d\n",
 			driver_name, irq, retval);
@@ -2214,7 +2202,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 	if (machine_is_lubbock()) {
 		retval = request_irq(LUBBOCK_USB_DISC_IRQ,
 				lubbock_vbus_irq,
-				IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
+				IRQF_SAMPLE_RANDOM,
 				driver_name, dev);
 		if (retval != 0) {
 			pr_err("%s: can't get irq %i, err %d\n",
@@ -2223,7 +2211,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 		}
 		retval = request_irq(LUBBOCK_USB_IRQ,
 				lubbock_vbus_irq,
-				IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
+				IRQF_SAMPLE_RANDOM,
 				driver_name, dev);
 		if (retval != 0) {
 			pr_err("%s: can't get irq %i, err %d\n",
diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h
index f572c56..8eaf4e4 100644
--- a/drivers/usb/gadget/pxa25x_udc.h
+++ b/drivers/usb/gadget/pxa25x_udc.h
@@ -9,15 +9,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef __LINUX_USB_GADGET_PXA25X_H
@@ -161,8 +152,6 @@ static struct pxa25x_udc *the_controller;
 
 #ifdef DEBUG
 
-static int is_vbus_present(void);
-
 static const char *state_name[] = {
 	"EP0_IDLE",
 	"EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE",
@@ -214,8 +203,7 @@ dump_state(struct pxa25x_udc *dev)
 	u32		tmp;
 	unsigned	i;
 
-	DMSG("%s %s, uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n",
-		is_vbus_present() ? "host " : "disconnected",
+	DMSG("%s, uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n",
 		state_name[dev->ep0state],
 		UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL);
 	dump_udccr("udccr");
@@ -232,9 +220,6 @@ dump_state(struct pxa25x_udc *dev)
 	} else
 		DMSG("ep0 driver '%s'\n", dev->driver->driver.name);
 
-	if (!is_vbus_present())
-		return;
-
 	dump_udccs0 ("udccs0");
 	DMSG("ep0 IN %lu/%lu, OUT %lu/%lu\n",
 		dev->stats.write.bytes, dev->stats.write.ops,
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 85b68c7..18b6b09 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -8,16 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -1439,7 +1429,7 @@ static int pxa_ep_enable(struct usb_ep *_ep,
 		return -EINVAL;
 	}
 
-	if (ep->fifo_size < le16_to_cpu(desc->wMaxPacketSize)) {
+	if (ep->fifo_size < usb_endpoint_maxp(desc)) {
 		ep_err(ep, "bad maxpacket\n");
 		return -ERANGE;
 	}
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index b01696e..7f4e8f4 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -9,15 +9,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307	 USA
  */
 
 #ifndef __LINUX_USB_GADGET_PXA27X_H
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 50991e5..68a826a 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -8,16 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 
 #include <linux/module.h>
@@ -28,13 +18,14 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/slab.h>
+#include <linux/dma-mapping.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 
 #include "r8a66597-udc.h"
 
-#define DRIVER_VERSION	"2009-08-18"
+#define DRIVER_VERSION	"2011-09-26"
 
 static const char udc_name[] = "r8a66597_udc";
 static const char *r8a66597_ep_name[] = {
@@ -115,13 +106,15 @@ static inline u16 control_reg_get_pid(struct r8a66597 *r8a66597, u16 pipenum)
 	u16 pid = 0;
 	unsigned long offset;
 
-	if (pipenum == 0)
+	if (pipenum == 0) {
 		pid = r8a66597_read(r8a66597, DCPCTR) & PID;
-	else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+	} else if (pipenum < R8A66597_MAX_NUM_PIPE) {
 		offset = get_pipectr_addr(pipenum);
 		pid = r8a66597_read(r8a66597, offset) & PID;
-	} else
-		printk(KERN_ERR "unexpect pipe num (%d)\n", pipenum);
+	} else {
+		dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n",
+			pipenum);
+	}
 
 	return pid;
 }
@@ -131,13 +124,15 @@ static inline void control_reg_set_pid(struct r8a66597 *r8a66597, u16 pipenum,
 {
 	unsigned long offset;
 
-	if (pipenum == 0)
+	if (pipenum == 0) {
 		r8a66597_mdfy(r8a66597, pid, PID, DCPCTR);
-	else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+	} else if (pipenum < R8A66597_MAX_NUM_PIPE) {
 		offset = get_pipectr_addr(pipenum);
 		r8a66597_mdfy(r8a66597, pid, PID, offset);
-	} else
-		printk(KERN_ERR "unexpect pipe num (%d)\n", pipenum);
+	} else {
+		dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n",
+			pipenum);
+	}
 }
 
 static inline void pipe_start(struct r8a66597 *r8a66597, u16 pipenum)
@@ -160,13 +155,15 @@ static inline u16 control_reg_get(struct r8a66597 *r8a66597, u16 pipenum)
 	u16 ret = 0;
 	unsigned long offset;
 
-	if (pipenum == 0)
+	if (pipenum == 0) {
 		ret = r8a66597_read(r8a66597, DCPCTR);
-	else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+	} else if (pipenum < R8A66597_MAX_NUM_PIPE) {
 		offset = get_pipectr_addr(pipenum);
 		ret = r8a66597_read(r8a66597, offset);
-	} else
-		printk(KERN_ERR "unexpect pipe num (%d)\n", pipenum);
+	} else {
+		dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n",
+			pipenum);
+	}
 
 	return ret;
 }
@@ -177,13 +174,63 @@ static inline void control_reg_sqclr(struct r8a66597 *r8a66597, u16 pipenum)
 
 	pipe_stop(r8a66597, pipenum);
 
-	if (pipenum == 0)
+	if (pipenum == 0) {
 		r8a66597_bset(r8a66597, SQCLR, DCPCTR);
-	else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+	} else if (pipenum < R8A66597_MAX_NUM_PIPE) {
 		offset = get_pipectr_addr(pipenum);
 		r8a66597_bset(r8a66597, SQCLR, offset);
-	} else
-		printk(KERN_ERR "unexpect pipe num(%d)\n", pipenum);
+	} else {
+		dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n",
+			pipenum);
+	}
+}
+
+static void control_reg_sqset(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	unsigned long offset;
+
+	pipe_stop(r8a66597, pipenum);
+
+	if (pipenum == 0) {
+		r8a66597_bset(r8a66597, SQSET, DCPCTR);
+	} else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+		offset = get_pipectr_addr(pipenum);
+		r8a66597_bset(r8a66597, SQSET, offset);
+	} else {
+		dev_err(r8a66597_to_dev(r8a66597),
+			"unexpect pipe num(%d)\n", pipenum);
+	}
+}
+
+static u16 control_reg_sqmon(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	unsigned long offset;
+
+	if (pipenum == 0) {
+		return r8a66597_read(r8a66597, DCPCTR) & SQMON;
+	} else if (pipenum < R8A66597_MAX_NUM_PIPE) {
+		offset = get_pipectr_addr(pipenum);
+		return r8a66597_read(r8a66597, offset) & SQMON;
+	} else {
+		dev_err(r8a66597_to_dev(r8a66597),
+			"unexpect pipe num(%d)\n", pipenum);
+	}
+
+	return 0;
+}
+
+static u16 save_usb_toggle(struct r8a66597 *r8a66597, u16 pipenum)
+{
+	return control_reg_sqmon(r8a66597, pipenum);
+}
+
+static void restore_usb_toggle(struct r8a66597 *r8a66597, u16 pipenum,
+			       u16 toggle)
+{
+	if (toggle)
+		control_reg_sqset(r8a66597, pipenum);
+	else
+		control_reg_sqclr(r8a66597, pipenum);
 }
 
 static inline int get_buffer_size(struct r8a66597 *r8a66597, u16 pipenum)
@@ -222,18 +269,51 @@ static inline unsigned short mbw_value(struct r8a66597 *r8a66597)
 		return MBW_16;
 }
 
+static void r8a66597_change_curpipe(struct r8a66597 *r8a66597, u16 pipenum,
+				    u16 isel, u16 fifosel)
+{
+	u16 tmp, mask, loop;
+	int i = 0;
+
+	if (!pipenum) {
+		mask = ISEL | CURPIPE;
+		loop = isel;
+	} else {
+		mask = CURPIPE;
+		loop = pipenum;
+	}
+	r8a66597_mdfy(r8a66597, loop, mask, fifosel);
+
+	do {
+		tmp = r8a66597_read(r8a66597, fifosel);
+		if (i++ > 1000000) {
+			dev_err(r8a66597_to_dev(r8a66597),
+				"r8a66597: register%x, loop %x "
+				"is timeout\n", fifosel, loop);
+			break;
+		}
+		ndelay(1);
+	} while ((tmp & mask) != loop);
+}
+
 static inline void pipe_change(struct r8a66597 *r8a66597, u16 pipenum)
 {
 	struct r8a66597_ep *ep = r8a66597->pipenum2ep[pipenum];
 
 	if (ep->use_dma)
-		return;
+		r8a66597_bclr(r8a66597, DREQE, ep->fifosel);
 
 	r8a66597_mdfy(r8a66597, pipenum, CURPIPE, ep->fifosel);
 
 	ndelay(450);
 
-	r8a66597_bset(r8a66597, mbw_value(r8a66597), ep->fifosel);
+	if (r8a66597_is_sudmac(r8a66597) && ep->use_dma)
+		r8a66597_bclr(r8a66597, mbw_value(r8a66597), ep->fifosel);
+	else
+		r8a66597_bset(r8a66597, mbw_value(r8a66597), ep->fifosel);
+
+	if (ep->use_dma)
+		r8a66597_bset(r8a66597, DREQE, ep->fifosel);
 }
 
 static int pipe_buffer_setting(struct r8a66597 *r8a66597,
@@ -297,17 +377,18 @@ static void pipe_buffer_release(struct r8a66597 *r8a66597,
 	if (info->pipe == 0)
 		return;
 
-	if (is_bulk_pipe(info->pipe))
+	if (is_bulk_pipe(info->pipe)) {
 		r8a66597->bulk--;
-	else if (is_interrupt_pipe(info->pipe))
+	} else if (is_interrupt_pipe(info->pipe)) {
 		r8a66597->interrupt--;
-	else if (is_isoc_pipe(info->pipe)) {
+	} else if (is_isoc_pipe(info->pipe)) {
 		r8a66597->isochronous--;
 		if (info->type == R8A66597_BULK)
 			r8a66597->bulk--;
-	} else
-		printk(KERN_ERR "ep_release: unexpect pipenum (%d)\n",
-				info->pipe);
+	} else {
+		dev_err(r8a66597_to_dev(r8a66597),
+			"ep_release: unexpect pipenum (%d)\n", info->pipe);
+	}
 }
 
 static void pipe_initialize(struct r8a66597_ep *ep)
@@ -337,11 +418,17 @@ static void r8a66597_ep_setting(struct r8a66597 *r8a66597,
 	ep->fifoaddr = CFIFO;
 	ep->fifosel = CFIFOSEL;
 	ep->fifoctr = CFIFOCTR;
-	ep->fifotrn = 0;
 
 	ep->pipectr = get_pipectr_addr(pipenum);
+	if (is_bulk_pipe(pipenum) || is_isoc_pipe(pipenum)) {
+		ep->pipetre = get_pipetre_addr(pipenum);
+		ep->pipetrn = get_pipetrn_addr(pipenum);
+	} else {
+		ep->pipetre = 0;
+		ep->pipetrn = 0;
+	}
 	ep->pipenum = pipenum;
-	ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	ep->ep.maxpacket = usb_endpoint_maxp(desc);
 	r8a66597->pipenum2ep[pipenum] = ep;
 	r8a66597->epaddr2ep[desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK]
 		= ep;
@@ -381,7 +468,8 @@ static int alloc_pipe_config(struct r8a66597_ep *ep,
 	case USB_ENDPOINT_XFER_BULK:
 		if (r8a66597->bulk >= R8A66597_MAX_NUM_BULK) {
 			if (r8a66597->isochronous >= R8A66597_MAX_NUM_ISOC) {
-				printk(KERN_ERR "bulk pipe is insufficient\n");
+				dev_err(r8a66597_to_dev(r8a66597),
+					"bulk pipe is insufficient\n");
 				return -ENODEV;
 			} else {
 				info.pipe = R8A66597_BASE_PIPENUM_ISOC
@@ -397,7 +485,8 @@ static int alloc_pipe_config(struct r8a66597_ep *ep,
 		break;
 	case USB_ENDPOINT_XFER_INT:
 		if (r8a66597->interrupt >= R8A66597_MAX_NUM_INT) {
-			printk(KERN_ERR "interrupt pipe is insufficient\n");
+			dev_err(r8a66597_to_dev(r8a66597),
+				"interrupt pipe is insufficient\n");
 			return -ENODEV;
 		}
 		info.pipe = R8A66597_BASE_PIPENUM_INT + r8a66597->interrupt;
@@ -406,7 +495,8 @@ static int alloc_pipe_config(struct r8a66597_ep *ep,
 		break;
 	case USB_ENDPOINT_XFER_ISOC:
 		if (r8a66597->isochronous >= R8A66597_MAX_NUM_ISOC) {
-			printk(KERN_ERR "isochronous pipe is insufficient\n");
+			dev_err(r8a66597_to_dev(r8a66597),
+				"isochronous pipe is insufficient\n");
 			return -ENODEV;
 		}
 		info.pipe = R8A66597_BASE_PIPENUM_ISOC + r8a66597->isochronous;
@@ -414,13 +504,13 @@ static int alloc_pipe_config(struct r8a66597_ep *ep,
 		counter = &r8a66597->isochronous;
 		break;
 	default:
-		printk(KERN_ERR "unexpect xfer type\n");
+		dev_err(r8a66597_to_dev(r8a66597), "unexpect xfer type\n");
 		return -EINVAL;
 	}
 	ep->type = info.type;
 
 	info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
-	info.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	info.maxpacket = usb_endpoint_maxp(desc);
 	info.interval = desc->bInterval;
 	if (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
 		info.dir_in = 1;
@@ -429,7 +519,8 @@ static int alloc_pipe_config(struct r8a66597_ep *ep,
 
 	ret = pipe_buffer_setting(r8a66597, &info);
 	if (ret < 0) {
-		printk(KERN_ERR "pipe_buffer_setting fail\n");
+		dev_err(r8a66597_to_dev(r8a66597),
+			"pipe_buffer_setting fail\n");
 		return ret;
 	}
 
@@ -495,6 +586,124 @@ static void start_ep0_write(struct r8a66597_ep *ep,
 	}
 }
 
+static void disable_fifosel(struct r8a66597 *r8a66597, u16 pipenum,
+			    u16 fifosel)
+{
+	u16 tmp;
+
+	tmp = r8a66597_read(r8a66597, fifosel) & CURPIPE;
+	if (tmp == pipenum)
+		r8a66597_change_curpipe(r8a66597, 0, 0, fifosel);
+}
+
+static void change_bfre_mode(struct r8a66597 *r8a66597, u16 pipenum,
+			     int enable)
+{
+	struct r8a66597_ep *ep = r8a66597->pipenum2ep[pipenum];
+	u16 tmp, toggle;
+
+	/* check current BFRE bit */
+	r8a66597_write(r8a66597, pipenum, PIPESEL);
+	tmp = r8a66597_read(r8a66597, PIPECFG) & R8A66597_BFRE;
+	if ((enable && tmp) || (!enable && !tmp))
+		return;
+
+	/* change BFRE bit */
+	pipe_stop(r8a66597, pipenum);
+	disable_fifosel(r8a66597, pipenum, CFIFOSEL);
+	disable_fifosel(r8a66597, pipenum, D0FIFOSEL);
+	disable_fifosel(r8a66597, pipenum, D1FIFOSEL);
+
+	toggle = save_usb_toggle(r8a66597, pipenum);
+
+	r8a66597_write(r8a66597, pipenum, PIPESEL);
+	if (enable)
+		r8a66597_bset(r8a66597, R8A66597_BFRE, PIPECFG);
+	else
+		r8a66597_bclr(r8a66597, R8A66597_BFRE, PIPECFG);
+
+	/* initialize for internal BFRE flag */
+	r8a66597_bset(r8a66597, ACLRM, ep->pipectr);
+	r8a66597_bclr(r8a66597, ACLRM, ep->pipectr);
+
+	restore_usb_toggle(r8a66597, pipenum, toggle);
+}
+
+static int sudmac_alloc_channel(struct r8a66597 *r8a66597,
+				struct r8a66597_ep *ep,
+				struct r8a66597_request *req)
+{
+	struct r8a66597_dma *dma;
+
+	if (!r8a66597_is_sudmac(r8a66597))
+		return -ENODEV;
+
+	/* Check transfer type */
+	if (!is_bulk_pipe(ep->pipenum))
+		return -EIO;
+
+	if (r8a66597->dma.used)
+		return -EBUSY;
+
+	/* set SUDMAC parameters */
+	dma = &r8a66597->dma;
+	dma->used = 1;
+	if (ep->desc->bEndpointAddress & USB_DIR_IN) {
+		dma->dir = 1;
+	} else {
+		dma->dir = 0;
+		change_bfre_mode(r8a66597, ep->pipenum, 1);
+	}
+
+	/* set r8a66597_ep paramters */
+	ep->use_dma = 1;
+	ep->dma = dma;
+	ep->fifoaddr = D0FIFO;
+	ep->fifosel = D0FIFOSEL;
+	ep->fifoctr = D0FIFOCTR;
+
+	/* dma mapping */
+	req->req.dma = dma_map_single(r8a66597_to_dev(ep->r8a66597),
+				req->req.buf, req->req.length,
+				dma->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+	return 0;
+}
+
+static void sudmac_free_channel(struct r8a66597 *r8a66597,
+				struct r8a66597_ep *ep,
+				struct r8a66597_request *req)
+{
+	if (!r8a66597_is_sudmac(r8a66597))
+		return;
+
+	dma_unmap_single(r8a66597_to_dev(ep->r8a66597),
+			 req->req.dma, req->req.length,
+			 ep->dma->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+	r8a66597_bclr(r8a66597, DREQE, ep->fifosel);
+	r8a66597_change_curpipe(r8a66597, 0, 0, ep->fifosel);
+
+	ep->dma->used = 0;
+	ep->use_dma = 0;
+	ep->fifoaddr = CFIFO;
+	ep->fifosel = CFIFOSEL;
+	ep->fifoctr = CFIFOCTR;
+}
+
+static void sudmac_start(struct r8a66597 *r8a66597, struct r8a66597_ep *ep,
+			 struct r8a66597_request *req)
+{
+	BUG_ON(req->req.length == 0);
+
+	r8a66597_sudmac_write(r8a66597, LBA_WAIT, CH0CFG);
+	r8a66597_sudmac_write(r8a66597, req->req.dma, CH0BA);
+	r8a66597_sudmac_write(r8a66597, req->req.length, CH0BBC);
+	r8a66597_sudmac_write(r8a66597, CH0ENDE, DINTCTRL);
+
+	r8a66597_sudmac_write(r8a66597, DEN, CH0DEN);
+}
+
 static void start_packet_write(struct r8a66597_ep *ep,
 				struct r8a66597_request *req)
 {
@@ -505,11 +714,29 @@ static void start_packet_write(struct r8a66597_ep *ep,
 	disable_irq_empty(r8a66597, ep->pipenum);
 	pipe_start(r8a66597, ep->pipenum);
 
-	tmp = r8a66597_read(r8a66597, ep->fifoctr);
-	if (unlikely((tmp & FRDY) == 0))
-		pipe_irq_enable(r8a66597, ep->pipenum);
-	else
-		irq_packet_write(ep, req);
+	if (req->req.length == 0) {
+		transfer_complete(ep, req, 0);
+	} else {
+		r8a66597_write(r8a66597, ~(1 << ep->pipenum), BRDYSTS);
+		if (sudmac_alloc_channel(r8a66597, ep, req) < 0) {
+			/* PIO mode */
+			pipe_change(r8a66597, ep->pipenum);
+			disable_irq_empty(r8a66597, ep->pipenum);
+			pipe_start(r8a66597, ep->pipenum);
+			tmp = r8a66597_read(r8a66597, ep->fifoctr);
+			if (unlikely((tmp & FRDY) == 0))
+				pipe_irq_enable(r8a66597, ep->pipenum);
+			else
+				irq_packet_write(ep, req);
+		} else {
+			/* DMA mode */
+			pipe_change(r8a66597, ep->pipenum);
+			disable_irq_nrdy(r8a66597, ep->pipenum);
+			pipe_start(r8a66597, ep->pipenum);
+			enable_irq_nrdy(r8a66597, ep->pipenum);
+			sudmac_start(r8a66597, ep, req);
+		}
+	}
 }
 
 static void start_packet_read(struct r8a66597_ep *ep,
@@ -524,17 +751,26 @@ static void start_packet_read(struct r8a66597_ep *ep,
 		pipe_start(r8a66597, pipenum);
 		pipe_irq_enable(r8a66597, pipenum);
 	} else {
-		if (ep->use_dma) {
-			r8a66597_bset(r8a66597, TRCLR, ep->fifosel);
-			pipe_change(r8a66597, pipenum);
-			r8a66597_bset(r8a66597, TRENB, ep->fifosel);
+		pipe_stop(r8a66597, pipenum);
+		if (ep->pipetre) {
+			enable_irq_nrdy(r8a66597, pipenum);
+			r8a66597_write(r8a66597, TRCLR, ep->pipetre);
 			r8a66597_write(r8a66597,
-				(req->req.length + ep->ep.maxpacket - 1)
-					/ ep->ep.maxpacket,
-				ep->fifotrn);
+				DIV_ROUND_UP(req->req.length, ep->ep.maxpacket),
+				ep->pipetrn);
+			r8a66597_bset(r8a66597, TRENB, ep->pipetre);
+		}
+
+		if (sudmac_alloc_channel(r8a66597, ep, req) < 0) {
+			/* PIO mode */
+			change_bfre_mode(r8a66597, ep->pipenum, 0);
+			pipe_start(r8a66597, pipenum);	/* trigger once */
+			pipe_irq_enable(r8a66597, pipenum);
+		} else {
+			pipe_change(r8a66597, pipenum);
+			sudmac_start(r8a66597, ep, req);
+			pipe_start(r8a66597, pipenum);	/* trigger once */
 		}
-		pipe_start(r8a66597, pipenum);	/* trigger once */
-		pipe_irq_enable(r8a66597, pipenum);
 	}
 }
 
@@ -564,7 +800,8 @@ static void start_ep0(struct r8a66597_ep *ep, struct r8a66597_request *req)
 		control_end(ep->r8a66597, 0);
 		break;
 	default:
-		printk(KERN_ERR "start_ep0: unexpect ctsq(%x)\n", ctsq);
+		dev_err(r8a66597_to_dev(ep->r8a66597),
+			"start_ep0: unexpect ctsq(%x)\n", ctsq);
 		break;
 	}
 }
@@ -690,6 +927,9 @@ __acquires(r8a66597->lock)
 	if (!list_empty(&ep->queue))
 		restart = 1;
 
+	if (ep->use_dma)
+		sudmac_free_channel(ep->r8a66597, ep, req);
+
 	spin_unlock(&ep->r8a66597->lock);
 	req->req.complete(&ep->ep, &req->req);
 	spin_lock(&ep->r8a66597->lock);
@@ -718,7 +958,8 @@ static void irq_ep0_write(struct r8a66597_ep *ep, struct r8a66597_request *req)
 	do {
 		tmp = r8a66597_read(r8a66597, ep->fifoctr);
 		if (i++ > 100000) {
-			printk(KERN_ERR "pipe0 is busy. maybe cpu i/o bus"
+			dev_err(r8a66597_to_dev(r8a66597),
+				"pipe0 is busy. maybe cpu i/o bus "
 				"conflict. please power off this controller.");
 			return;
 		}
@@ -733,7 +974,7 @@ static void irq_ep0_write(struct r8a66597_ep *ep, struct r8a66597_request *req)
 	/* write fifo */
 	if (req->req.buf) {
 		if (size > 0)
-			r8a66597_write_fifo(r8a66597, ep->fifoaddr, buf, size);
+			r8a66597_write_fifo(r8a66597, ep, buf, size);
 		if ((size == 0) || ((size % ep->ep.maxpacket) != 0))
 			r8a66597_bset(r8a66597, BVAL, ep->fifoctr);
 	}
@@ -769,7 +1010,8 @@ static void irq_packet_write(struct r8a66597_ep *ep,
 	if (unlikely((tmp & FRDY) == 0)) {
 		pipe_stop(r8a66597, pipenum);
 		pipe_irq_disable(r8a66597, pipenum);
-		printk(KERN_ERR "write fifo not ready. pipnum=%d\n", pipenum);
+		dev_err(r8a66597_to_dev(r8a66597),
+			"write fifo not ready. pipnum=%d\n", pipenum);
 		return;
 	}
 
@@ -780,7 +1022,7 @@ static void irq_packet_write(struct r8a66597_ep *ep,
 
 	/* write fifo */
 	if (req->req.buf) {
-		r8a66597_write_fifo(r8a66597, ep->fifoaddr, buf, size);
+		r8a66597_write_fifo(r8a66597, ep, buf, size);
 		if ((size == 0)
 				|| ((size % ep->ep.maxpacket) != 0)
 				|| ((bufsize != ep->ep.maxpacket)
@@ -819,7 +1061,7 @@ static void irq_packet_read(struct r8a66597_ep *ep,
 		req->req.status = -EPIPE;
 		pipe_stop(r8a66597, pipenum);
 		pipe_irq_disable(r8a66597, pipenum);
-		printk(KERN_ERR "read fifo not ready");
+		dev_err(r8a66597_to_dev(r8a66597), "read fifo not ready");
 		return;
 	}
 
@@ -1095,7 +1337,7 @@ static void r8a66597_update_usb_speed(struct r8a66597 *r8a66597)
 		break;
 	default:
 		r8a66597->gadget.speed = USB_SPEED_UNKNOWN;
-		printk(KERN_ERR "USB speed unknown\n");
+		dev_err(r8a66597_to_dev(r8a66597), "USB speed unknown\n");
 	}
 }
 
@@ -1158,11 +1400,71 @@ __acquires(r8a66597->lock)
 		control_end(r8a66597, 0);
 		break;
 	default:
-		printk(KERN_ERR "ctrl_stage: unexpect ctsq(%x)\n", ctsq);
+		dev_err(r8a66597_to_dev(r8a66597),
+			"ctrl_stage: unexpect ctsq(%x)\n", ctsq);
 		break;
 	}
 }
 
+static void sudmac_finish(struct r8a66597 *r8a66597, struct r8a66597_ep *ep)
+{
+	u16 pipenum;
+	struct r8a66597_request *req;
+	u32 len;
+	int i = 0;
+
+	pipenum = ep->pipenum;
+	pipe_change(r8a66597, pipenum);
+
+	while (!(r8a66597_read(r8a66597, ep->fifoctr) & FRDY)) {
+		udelay(1);
+		if (unlikely(i++ >= 10000)) {	/* timeout = 10 msec */
+			dev_err(r8a66597_to_dev(r8a66597),
+				"%s: FRDY was not set (%d)\n",
+				__func__, pipenum);
+			return;
+		}
+	}
+
+	r8a66597_bset(r8a66597, BCLR, ep->fifoctr);
+	req = get_request_from_ep(ep);
+
+	/* prepare parameters */
+	len = r8a66597_sudmac_read(r8a66597, CH0CBC);
+	req->req.actual += len;
+
+	/* clear */
+	r8a66597_sudmac_write(r8a66597, CH0STCLR, DSTSCLR);
+
+	/* check transfer finish */
+	if ((!req->req.zero && (req->req.actual == req->req.length))
+			|| (len % ep->ep.maxpacket)) {
+		if (ep->dma->dir) {
+			disable_irq_ready(r8a66597, pipenum);
+			enable_irq_empty(r8a66597, pipenum);
+		} else {
+			/* Clear the interrupt flag for next transfer */
+			r8a66597_write(r8a66597, ~(1 << pipenum), BRDYSTS);
+			transfer_complete(ep, req, 0);
+		}
+	}
+}
+
+static void r8a66597_sudmac_irq(struct r8a66597 *r8a66597)
+{
+	u32 irqsts;
+	struct r8a66597_ep *ep;
+	u16 pipenum;
+
+	irqsts = r8a66597_sudmac_read(r8a66597, DINTSTS);
+	if (irqsts & CH0ENDS) {
+		r8a66597_sudmac_write(r8a66597, CH0ENDC, DINTSTSCLR);
+		pipenum = (r8a66597_read(r8a66597, D0FIFOSEL) & CURPIPE);
+		ep = r8a66597->pipenum2ep[pipenum];
+		sudmac_finish(r8a66597, ep);
+	}
+}
+
 static irqreturn_t r8a66597_irq(int irq, void *_r8a66597)
 {
 	struct r8a66597 *r8a66597 = _r8a66597;
@@ -1173,6 +1475,9 @@ static irqreturn_t r8a66597_irq(int irq, void *_r8a66597)
 	u16 savepipe;
 	u16 mask0;
 
+	if (r8a66597_is_sudmac(r8a66597))
+		r8a66597_sudmac_irq(r8a66597);
+
 	spin_lock(&r8a66597->lock);
 
 	intsts0 = r8a66597_read(r8a66597, INTSTS0);
@@ -1433,23 +1738,18 @@ static struct usb_ep_ops r8a66597_ep_ops = {
 };
 
 /*-------------------------------------------------------------------------*/
-static struct r8a66597 *the_controller;
-
-static int r8a66597_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+static int r8a66597_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct r8a66597 *r8a66597 = the_controller;
+	struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget);
 	int retval;
 
 	if (!driver
 			|| driver->speed != USB_SPEED_HIGH
-			|| !bind
 			|| !driver->setup)
 		return -EINVAL;
 	if (!r8a66597)
 		return -ENODEV;
-	if (r8a66597->driver)
-		return -EBUSY;
 
 	/* hook up the driver */
 	driver->driver.bus = NULL;
@@ -1458,14 +1758,8 @@ static int r8a66597_start(struct usb_gadget_driver *driver,
 
 	retval = device_add(&r8a66597->gadget.dev);
 	if (retval) {
-		printk(KERN_ERR "device_add error (%d)\n", retval);
-		goto error;
-	}
-
-	retval = bind(&r8a66597->gadget);
-	if (retval) {
-		printk(KERN_ERR "bind to driver error (%d)\n", retval);
-		device_del(&r8a66597->gadget.dev);
+		dev_err(r8a66597_to_dev(r8a66597), "device_add error (%d)\n",
+			retval);
 		goto error;
 	}
 
@@ -1489,23 +1783,17 @@ error:
 	return retval;
 }
 
-static int r8a66597_stop(struct usb_gadget_driver *driver)
+static int r8a66597_stop(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct r8a66597 *r8a66597 = the_controller;
+	struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget);
 	unsigned long flags;
 
-	if (driver != r8a66597->driver || !driver->unbind)
-		return -EINVAL;
-
 	spin_lock_irqsave(&r8a66597->lock, flags);
-	if (r8a66597->gadget.speed != USB_SPEED_UNKNOWN)
-		r8a66597_usb_disconnect(r8a66597);
 	r8a66597_bclr(r8a66597, VBSE, INTENB0);
 	disable_controller(r8a66597);
 	spin_unlock_irqrestore(&r8a66597->lock, flags);
 
-	driver->unbind(&r8a66597->gadget);
-
 	device_del(&r8a66597->gadget.dev);
 	r8a66597->driver = NULL;
 	return 0;
@@ -1535,8 +1823,8 @@ static int r8a66597_pullup(struct usb_gadget *gadget, int is_on)
 
 static struct usb_gadget_ops r8a66597_gadget_ops = {
 	.get_frame		= r8a66597_get_frame,
-	.start			= r8a66597_start,
-	.stop			= r8a66597_stop,
+	.udc_start		= r8a66597_start,
+	.udc_stop		= r8a66597_stop,
 	.pullup			= r8a66597_pullup,
 };
 
@@ -1547,6 +1835,8 @@ static int __exit r8a66597_remove(struct platform_device *pdev)
 	usb_del_gadget_udc(&r8a66597->gadget);
 	del_timer_sync(&r8a66597->timer);
 	iounmap(r8a66597->reg);
+	if (r8a66597->pdata->sudmac)
+		iounmap(r8a66597->sudmac_reg);
 	free_irq(platform_get_irq(pdev, 0), r8a66597);
 	r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
 #ifdef CONFIG_HAVE_CLK
@@ -1563,6 +1853,26 @@ static void nop_completion(struct usb_ep *ep, struct usb_request *r)
 {
 }
 
+static int __init r8a66597_sudmac_ioremap(struct r8a66597 *r8a66597,
+					  struct platform_device *pdev)
+{
+	struct resource *res;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sudmac");
+	if (!res) {
+		dev_err(&pdev->dev, "platform_get_resource error(sudmac).\n");
+		return -ENODEV;
+	}
+
+	r8a66597->sudmac_reg = ioremap(res->start, resource_size(res));
+	if (r8a66597->sudmac_reg == NULL) {
+		dev_err(&pdev->dev, "ioremap error(sudmac).\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
 static int __init r8a66597_probe(struct platform_device *pdev)
 {
 #ifdef CONFIG_HAVE_CLK
@@ -1579,7 +1889,7 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		ret = -ENODEV;
-		printk(KERN_ERR "platform_get_resource error.\n");
+		dev_err(&pdev->dev, "platform_get_resource error.\n");
 		goto clean_up;
 	}
 
@@ -1589,14 +1899,14 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 
 	if (irq < 0) {
 		ret = -ENODEV;
-		printk(KERN_ERR "platform_get_irq error.\n");
+		dev_err(&pdev->dev, "platform_get_irq error.\n");
 		goto clean_up;
 	}
 
 	reg = ioremap(res->start, resource_size(res));
 	if (reg == NULL) {
 		ret = -ENOMEM;
-		printk(KERN_ERR "ioremap error.\n");
+		dev_err(&pdev->dev, "ioremap error.\n");
 		goto clean_up;
 	}
 
@@ -1604,7 +1914,7 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 	r8a66597 = kzalloc(sizeof(struct r8a66597), GFP_KERNEL);
 	if (r8a66597 == NULL) {
 		ret = -ENOMEM;
-		printk(KERN_ERR "kzalloc error\n");
+		dev_err(&pdev->dev, "kzalloc error\n");
 		goto clean_up;
 	}
 
@@ -1640,13 +1950,18 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 		clk_enable(r8a66597->clk);
 	}
 #endif
+	if (r8a66597->pdata->sudmac) {
+		ret = r8a66597_sudmac_ioremap(r8a66597, pdev);
+		if (ret < 0)
+			goto clean_up2;
+	}
 
 	disable_controller(r8a66597); /* make sure controller is disabled */
 
-	ret = request_irq(irq, r8a66597_irq, IRQF_DISABLED | IRQF_SHARED,
+	ret = request_irq(irq, r8a66597_irq, IRQF_SHARED,
 			udc_name, r8a66597);
 	if (ret < 0) {
-		printk(KERN_ERR "request_irq error (%d)\n", ret);
+		dev_err(&pdev->dev, "request_irq error (%d)\n", ret);
 		goto clean_up2;
 	}
 
@@ -1672,13 +1987,10 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 	r8a66597->ep[0].fifoaddr = CFIFO;
 	r8a66597->ep[0].fifosel = CFIFOSEL;
 	r8a66597->ep[0].fifoctr = CFIFOCTR;
-	r8a66597->ep[0].fifotrn = 0;
 	r8a66597->ep[0].pipectr = get_pipectr_addr(0);
 	r8a66597->pipenum2ep[0] = &r8a66597->ep[0];
 	r8a66597->epaddr2ep[0] = &r8a66597->ep[0];
 
-	the_controller = r8a66597;
-
 	r8a66597->ep0_req = r8a66597_alloc_request(&r8a66597->ep[0].ep,
 							GFP_KERNEL);
 	if (r8a66597->ep0_req == NULL)
@@ -1705,6 +2017,8 @@ clean_up2:
 #endif
 clean_up:
 	if (r8a66597) {
+		if (r8a66597->sudmac_reg)
+			iounmap(r8a66597->sudmac_reg);
 		if (r8a66597->ep0_req)
 			r8a66597_free_request(&r8a66597->ep[0].ep,
 						r8a66597->ep0_req);
diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h
index 503f766..8e3de61 100644
--- a/drivers/usb/gadget/r8a66597-udc.h
+++ b/drivers/usb/gadget/r8a66597-udc.h
@@ -8,16 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 
 #ifndef __R8A66597_H__
@@ -53,6 +43,7 @@
 	((pipenum >= R8A66597_BASE_PIPENUM_ISOC) && \
 	 (pipenum < (R8A66597_BASE_PIPENUM_ISOC + R8A66597_MAX_NUM_ISOC)))
 
+#define r8a66597_is_sudmac(r8a66597)	(r8a66597->pdata->sudmac)
 struct r8a66597_pipe_info {
 	u16	pipe;
 	u16	epnum;
@@ -70,6 +61,7 @@ struct r8a66597_request {
 struct r8a66597_ep {
 	struct usb_ep		ep;
 	struct r8a66597		*r8a66597;
+	struct r8a66597_dma	*dma;
 
 	struct list_head	queue;
 	unsigned		busy:1;
@@ -85,13 +77,20 @@ struct r8a66597_ep {
 	unsigned char		fifoaddr;
 	unsigned char		fifosel;
 	unsigned char		fifoctr;
-	unsigned char		fifotrn;
 	unsigned char		pipectr;
+	unsigned char		pipetre;
+	unsigned char		pipetrn;
+};
+
+struct r8a66597_dma {
+	unsigned		used:1;
+	unsigned		dir:1;	/* 1 = IN(write), 0 = OUT(read) */
 };
 
 struct r8a66597 {
 	spinlock_t		lock;
 	void __iomem		*reg;
+	void __iomem		*sudmac_reg;
 
 #ifdef CONFIG_HAVE_CLK
 	struct clk *clk;
@@ -104,6 +103,7 @@ struct r8a66597 {
 	struct r8a66597_ep	ep[R8A66597_MAX_NUM_PIPE];
 	struct r8a66597_ep	*pipenum2ep[R8A66597_MAX_NUM_PIPE];
 	struct r8a66597_ep	*epaddr2ep[16];
+	struct r8a66597_dma	dma;
 
 	struct timer_list	timer;
 	struct usb_request	*ep0_req;	/* for internal request */
@@ -124,6 +124,7 @@ struct r8a66597 {
 #define gadget_to_r8a66597(_gadget)	\
 		container_of(_gadget, struct r8a66597, gadget)
 #define r8a66597_to_gadget(r8a66597) (&r8a66597->gadget)
+#define r8a66597_to_dev(r8a66597)	(r8a66597->gadget.dev.parent)
 
 static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset)
 {
@@ -182,12 +183,27 @@ static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
 	iowrite16(val, r8a66597->reg + offset);
 }
 
+static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
+				 u16 val, u16 pat, unsigned long offset)
+{
+	u16 tmp;
+	tmp = r8a66597_read(r8a66597, offset);
+	tmp = tmp & (~pat);
+	tmp = tmp | val;
+	r8a66597_write(r8a66597, tmp, offset);
+}
+
+#define r8a66597_bclr(r8a66597, val, offset)	\
+			r8a66597_mdfy(r8a66597, 0, val, offset)
+#define r8a66597_bset(r8a66597, val, offset)	\
+			r8a66597_mdfy(r8a66597, val, 0, offset)
+
 static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
-				       unsigned long offset,
+				       struct r8a66597_ep *ep,
 				       unsigned char *buf,
 				       int len)
 {
-	void __iomem *fifoaddr = r8a66597->reg + offset;
+	void __iomem *fifoaddr = r8a66597->reg + ep->fifoaddr;
 	int adj = 0;
 	int i;
 
@@ -215,18 +231,12 @@ static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
 			adj = 0x01; /* 16-bit wide */
 	}
 
+	if (r8a66597->pdata->wr0_shorted_to_wr1)
+		r8a66597_bclr(r8a66597, MBW_16, ep->fifosel);
 	for (i = 0; i < len; i++)
 		iowrite8(buf[i], fifoaddr + adj - (i & adj));
-}
-
-static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
-				 u16 val, u16 pat, unsigned long offset)
-{
-	u16 tmp;
-	tmp = r8a66597_read(r8a66597, offset);
-	tmp = tmp & (~pat);
-	tmp = tmp | val;
-	r8a66597_write(r8a66597, tmp, offset);
+	if (r8a66597->pdata->wr0_shorted_to_wr1)
+		r8a66597_bclr(r8a66597, MBW_16, ep->fifosel);
 }
 
 static inline u16 get_xtal_from_pdata(struct r8a66597_platdata *pdata)
@@ -251,12 +261,21 @@ static inline u16 get_xtal_from_pdata(struct r8a66597_platdata *pdata)
 	return clock;
 }
 
-#define r8a66597_bclr(r8a66597, val, offset)	\
-			r8a66597_mdfy(r8a66597, 0, val, offset)
-#define r8a66597_bset(r8a66597, val, offset)	\
-			r8a66597_mdfy(r8a66597, val, 0, offset)
+static inline u32 r8a66597_sudmac_read(struct r8a66597 *r8a66597,
+				       unsigned long offset)
+{
+	return ioread32(r8a66597->sudmac_reg + offset);
+}
+
+static inline void r8a66597_sudmac_write(struct r8a66597 *r8a66597, u32 val,
+					 unsigned long offset)
+{
+	iowrite32(val, r8a66597->sudmac_reg + offset);
+}
 
 #define get_pipectr_addr(pipenum)	(PIPE1CTR + (pipenum - 1) * 2)
+#define get_pipetre_addr(pipenum)	(PIPE1TRE + (pipenum - 1) * 4)
+#define get_pipetrn_addr(pipenum)	(PIPE1TRN + (pipenum - 1) * 4)
 
 #define enable_irq_ready(r8a66597, pipenum)	\
 	enable_pipe_irq(r8a66597, pipenum, BRDYENB)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 8bdee67..a552453 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -1951,30 +1951,26 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg)
 	case S3C_DSTS_EnumSpd_FS:
 	case S3C_DSTS_EnumSpd_FS48:
 		hsotg->gadget.speed = USB_SPEED_FULL;
-		dev_info(hsotg->dev, "new device is full-speed\n");
-
 		ep0_mps = EP0_MPS_LIMIT;
 		ep_mps = 64;
 		break;
 
 	case S3C_DSTS_EnumSpd_HS:
-		dev_info(hsotg->dev, "new device is high-speed\n");
 		hsotg->gadget.speed = USB_SPEED_HIGH;
-
 		ep0_mps = EP0_MPS_LIMIT;
 		ep_mps = 512;
 		break;
 
 	case S3C_DSTS_EnumSpd_LS:
 		hsotg->gadget.speed = USB_SPEED_LOW;
-		dev_info(hsotg->dev, "new device is low-speed\n");
-
 		/* note, we don't actually support LS in this driver at the
 		 * moment, and the documentation seems to imply that it isn't
 		 * supported by the PHYs on some of the devices.
 		 */
 		break;
 	}
+	dev_info(hsotg->dev, "new device is %s\n",
+		 usb_speed_string(hsotg->gadget.speed));
 
 	/* we should now know the maximum packet size for an
 	 * endpoint, so set the endpoints to a default value. */
@@ -2297,7 +2293,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
 		return -EINVAL;
 	}
 
-	mps = le16_to_cpu(desc->wMaxPacketSize);
+	mps = usb_endpoint_maxp(desc);
 
 	/* note, we handle this here instead of s3c_hsotg_set_ep_maxpacket */
 
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index 3fa717c..8d54f89 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -26,6 +26,7 @@
 #include <linux/clk.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
 #include <linux/prefetch.h>
 
 #include <mach/regs-s3c2443-clock.h>
@@ -137,6 +138,7 @@ struct s3c_hsudc {
 	struct usb_gadget_driver *driver;
 	struct device *dev;
 	struct s3c24xx_hsudc_platdata *pd;
+	struct otg_transceiver *transceiver;
 	spinlock_t lock;
 	void __iomem *regs;
 	struct resource *mem_rsrc;
@@ -759,11 +761,11 @@ static int s3c_hsudc_ep_enable(struct usb_ep *_ep,
 	if (!_ep || !desc || hsep->desc || _ep->name == ep0name
 		|| desc->bDescriptorType != USB_DT_ENDPOINT
 		|| hsep->bEndpointAddress != desc->bEndpointAddress
-		|| ep_maxpacket(hsep) < le16_to_cpu(desc->wMaxPacketSize))
+		|| ep_maxpacket(hsep) < usb_endpoint_maxp(desc))
 		return -EINVAL;
 
 	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
-		&& le16_to_cpu(desc->wMaxPacketSize) != ep_maxpacket(hsep))
+		&& usb_endpoint_maxp(desc) != ep_maxpacket(hsep))
 		|| !desc->wMaxPacketSize)
 		return -ERANGE;
 
@@ -779,7 +781,7 @@ static int s3c_hsudc_ep_enable(struct usb_ep *_ep,
 
 	hsep->stopped = hsep->wedge = 0;
 	hsep->desc = desc;
-	hsep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	hsep->ep.maxpacket = usb_endpoint_maxp(desc);
 
 	s3c_hsudc_set_halt(_ep, 0);
 	__set_bit(ep_index(hsep), hsudc->regs + S3C_EIER);
@@ -1171,6 +1173,22 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver,
 		return ret;
 	}
 
+	/* connect to bus through transceiver */
+	if (hsudc->transceiver) {
+		ret = otg_set_peripheral(hsudc->transceiver, &hsudc->gadget);
+		if (ret) {
+			dev_err(hsudc->dev, "%s: can't bind to transceiver\n",
+					hsudc->gadget.name);
+			driver->unbind(&hsudc->gadget);
+
+			device_del(&hsudc->gadget.dev);
+
+			hsudc->driver = NULL;
+			hsudc->gadget.dev.driver = NULL;
+			return ret;
+		}
+	}
+
 	enable_irq(hsudc->irq);
 	dev_info(hsudc->dev, "bound driver %s\n", driver->driver.name);
 
@@ -1201,6 +1219,9 @@ static int s3c_hsudc_stop(struct usb_gadget_driver *driver)
 	s3c_hsudc_stop_activity(hsudc, driver);
 	spin_unlock_irqrestore(&hsudc->lock, flags);
 
+	if (hsudc->transceiver)
+		(void) otg_set_peripheral(hsudc->transceiver, NULL);
+
 	driver->unbind(&hsudc->gadget);
 	device_del(&hsudc->gadget.dev);
 	disable_irq(hsudc->irq);
@@ -1220,10 +1241,24 @@ static int s3c_hsudc_gadget_getframe(struct usb_gadget *gadget)
 	return s3c_hsudc_read_frameno(to_hsudc(gadget));
 }
 
+static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+	struct s3c_hsudc *hsudc = the_controller;
+
+	if (!hsudc)
+		return -ENODEV;
+
+	if (hsudc->transceiver)
+		return otg_set_power(hsudc->transceiver, mA);
+
+	return -EOPNOTSUPP;
+}
+
 static struct usb_gadget_ops s3c_hsudc_gadget_ops = {
 	.get_frame	= s3c_hsudc_gadget_getframe,
 	.start		= s3c_hsudc_start,
 	.stop		= s3c_hsudc_stop,
+	.vbus_draw	= s3c_hsudc_vbus_draw,
 };
 
 static int s3c_hsudc_probe(struct platform_device *pdev)
@@ -1247,6 +1282,8 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 	hsudc->dev = dev;
 	hsudc->pd = pdev->dev.platform_data;
 
+	hsudc->transceiver = otg_get_transceiver();
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(dev, "unable to obtain driver resource data\n");
@@ -1269,19 +1306,6 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 		goto err_remap;
 	}
 
-	ret = platform_get_irq(pdev, 0);
-	if (ret < 0) {
-		dev_err(dev, "unable to obtain IRQ number\n");
-		goto err_irq;
-	}
-	hsudc->irq = ret;
-
-	ret = request_irq(hsudc->irq, s3c_hsudc_irq, 0, driver_name, hsudc);
-	if (ret < 0) {
-		dev_err(dev, "irq request failed\n");
-		goto err_irq;
-	}
-
 	spin_lock_init(&hsudc->lock);
 
 	device_initialize(&hsudc->gadget.dev);
@@ -1299,6 +1323,19 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 
 	s3c_hsudc_setup_ep(hsudc);
 
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0) {
+		dev_err(dev, "unable to obtain IRQ number\n");
+		goto err_irq;
+	}
+	hsudc->irq = ret;
+
+	ret = request_irq(hsudc->irq, s3c_hsudc_irq, 0, driver_name, hsudc);
+	if (ret < 0) {
+		dev_err(dev, "irq request failed\n");
+		goto err_irq;
+	}
+
 	hsudc->uclk = clk_get(&pdev->dev, "usb-device");
 	if (IS_ERR(hsudc->uclk)) {
 		dev_err(dev, "failed to find usb-device clock source\n");
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 8d31848..b864377 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -10,16 +10,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #include <linux/module.h>
@@ -1082,7 +1072,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep,
 	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
 		return -ESHUTDOWN;
 
-	max = le16_to_cpu(desc->wMaxPacketSize) & 0x1fff;
+	max = usb_endpoint_maxp(desc) & 0x1fff;
 
 	local_irq_save (flags);
 	_ep->maxpacket = max & 0x7ff;
@@ -1903,7 +1893,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
 
 	/* irq setup after old hardware state is cleaned up */
 	retval = request_irq(IRQ_USBD, s3c2410_udc_irq,
-			     IRQF_DISABLED, gadget_name, udc);
+			     0, gadget_name, udc);
 
 	if (retval != 0) {
 		dev_err(dev, "cannot get irq %i, err %d\n", IRQ_USBD, retval);
@@ -1927,7 +1917,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
 		}
 
 		retval = request_irq(irq, s3c2410_udc_vbus_irq,
-				     IRQF_DISABLED | IRQF_TRIGGER_RISING
+				     IRQF_TRIGGER_RISING
 				     | IRQF_TRIGGER_FALLING | IRQF_SHARED,
 				     gadget_name, udc);
 
diff --git a/drivers/usb/gadget/s3c2410_udc.h b/drivers/usb/gadget/s3c2410_udc.h
index 9e0bece..a48f619 100644
--- a/drivers/usb/gadget/s3c2410_udc.h
+++ b/drivers/usb/gadget/s3c2410_udc.h
@@ -9,16 +9,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #ifndef _S3C2410_UDC_H
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index d3dd227..c7f291a 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -9,15 +9,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 
@@ -52,6 +43,12 @@
  * characters rather then a pointer to void.
  */
 
+/*
+ * When USB_GADGET_DEBUG_FILES is defined the module param num_buffers
+ * sets the number of pipeline buffers (length of the fsg_buffhd array).
+ * The valid range of num_buffers is: num >= 2 && num <= 4.
+ */
+
 
 #include <linux/usb/storage.h>
 #include <scsi/scsi.h>
@@ -247,6 +244,8 @@ struct fsg_lun {
 	u32		sense_data_info;
 	u32		unit_attention_data;
 
+	unsigned int	blkbits;	/* Bits of logical block size of bound block device */
+	unsigned int	blksize;	/* logical block size of bound block device */
 	struct device	dev;
 };
 
@@ -262,8 +261,31 @@ static struct fsg_lun *fsg_lun_from_dev(struct device *dev)
 #define EP0_BUFSIZE	256
 #define DELAYED_STATUS	(EP0_BUFSIZE + 999)	/* An impossibly large value */
 
-/* Number of buffers we will use.  2 is enough for double-buffering */
-#define FSG_NUM_BUFFERS	2
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS;
+module_param_named(num_buffers, fsg_num_buffers, uint, S_IRUGO);
+MODULE_PARM_DESC(num_buffers, "Number of pipeline buffers");
+
+#else
+
+/*
+ * Number of buffers we will use.
+ * 2 is usually enough for good buffering pipeline
+ */
+#define fsg_num_buffers	CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS
+
+#endif /* CONFIG_USB_DEBUG */
+
+/* check if fsg_num_buffers is within a valid range */
+static inline int fsg_num_buffers_validate(void)
+{
+	if (fsg_num_buffers >= 2 && fsg_num_buffers <= 4)
+		return 0;
+	pr_err("fsg_num_buffers %u is out of range (%d to %d)\n",
+	       fsg_num_buffers, 2 ,4);
+	return -EINVAL;
+}
 
 /* Default size of buffer length. */
 #define FSG_BUFLEN	((u32)16384)
@@ -493,12 +515,128 @@ static struct usb_descriptor_header *fsg_hs_function[] = {
 	NULL,
 };
 
+static struct usb_endpoint_descriptor
+fsg_ss_bulk_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	/* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc = {
+	.bLength =		sizeof(fsg_ss_bulk_in_comp_desc),
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/*.bMaxBurst =		DYNAMIC, */
+};
+
+static struct usb_endpoint_descriptor
+fsg_ss_bulk_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	/* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = {
+	.bLength =		sizeof(fsg_ss_bulk_in_comp_desc),
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/*.bMaxBurst =		DYNAMIC, */
+};
+
+#ifndef FSG_NO_INTR_EP
+
+static struct usb_endpoint_descriptor
+fsg_ss_intr_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	/* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(2),
+	.bInterval =		9,	/* 2**(9-1) = 256 uframes -> 32 ms */
+};
+
+static struct usb_ss_ep_comp_descriptor fsg_ss_intr_in_comp_desc = {
+	.bLength =		sizeof(fsg_ss_bulk_in_comp_desc),
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	.wBytesPerInterval =	cpu_to_le16(2),
+};
+
+#ifndef FSG_NO_OTG
+#  define FSG_SS_FUNCTION_PRE_EP_ENTRIES	2
+#else
+#  define FSG_SS_FUNCTION_PRE_EP_ENTRIES	1
+#endif
+
+#endif
+
+static __maybe_unused struct usb_ext_cap_descriptor fsg_ext_cap_desc = {
+	.bLength =		USB_DT_USB_EXT_CAP_SIZE,
+	.bDescriptorType =	USB_DT_DEVICE_CAPABILITY,
+	.bDevCapabilityType =	USB_CAP_TYPE_EXT,
+
+	.bmAttributes =		cpu_to_le32(USB_LPM_SUPPORT),
+};
+
+static __maybe_unused struct usb_ss_cap_descriptor fsg_ss_cap_desc = {
+	.bLength =		USB_DT_USB_SS_CAP_SIZE,
+	.bDescriptorType =	USB_DT_DEVICE_CAPABILITY,
+	.bDevCapabilityType =	USB_SS_CAP_TYPE,
+
+	/* .bmAttributes = LTM is not supported yet */
+
+	.wSpeedSupported =	cpu_to_le16(USB_LOW_SPEED_OPERATION
+		| USB_FULL_SPEED_OPERATION
+		| USB_HIGH_SPEED_OPERATION
+		| USB_5GBPS_OPERATION),
+	.bFunctionalitySupport = USB_LOW_SPEED_OPERATION,
+	.bU1devExitLat =	USB_DEFAULT_U1_DEV_EXIT_LAT,
+	.bU2DevExitLat =	USB_DEFAULT_U2_DEV_EXIT_LAT,
+};
+
+static __maybe_unused struct usb_bos_descriptor fsg_bos_desc = {
+	.bLength =		USB_DT_BOS_SIZE,
+	.bDescriptorType =	USB_DT_BOS,
+
+	.wTotalLength =		USB_DT_BOS_SIZE
+				+ USB_DT_USB_EXT_CAP_SIZE
+				+ USB_DT_USB_SS_CAP_SIZE,
+
+	.bNumDeviceCaps =	2,
+};
+
+static struct usb_descriptor_header *fsg_ss_function[] = {
+#ifndef FSG_NO_OTG
+	(struct usb_descriptor_header *) &fsg_otg_desc,
+#endif
+	(struct usb_descriptor_header *) &fsg_intf_desc,
+	(struct usb_descriptor_header *) &fsg_ss_bulk_in_desc,
+	(struct usb_descriptor_header *) &fsg_ss_bulk_in_comp_desc,
+	(struct usb_descriptor_header *) &fsg_ss_bulk_out_desc,
+	(struct usb_descriptor_header *) &fsg_ss_bulk_out_comp_desc,
+#ifndef FSG_NO_INTR_EP
+	(struct usb_descriptor_header *) &fsg_ss_intr_in_desc,
+	(struct usb_descriptor_header *) &fsg_ss_intr_in_comp_desc,
+#endif
+	NULL,
+};
+
 /* Maxpacket and other transfer characteristics vary by speed. */
 static __maybe_unused struct usb_endpoint_descriptor *
 fsg_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *fs,
-		struct usb_endpoint_descriptor *hs)
+		struct usb_endpoint_descriptor *hs,
+		struct usb_endpoint_descriptor *ss)
 {
-	if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+	if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
+		return ss;
+	else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
 		return hs;
 	return fs;
 }
@@ -580,13 +718,24 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
 		rc = (int) size;
 		goto out;
 	}
-	num_sectors = size >> 9;	/* File size in 512-byte blocks */
+
+	if (curlun->cdrom) {
+		curlun->blksize = 2048;
+		curlun->blkbits = 11;
+	} else if (inode->i_bdev) {
+		curlun->blksize = bdev_logical_block_size(inode->i_bdev);
+		curlun->blkbits = blksize_bits(curlun->blksize);
+	} else {
+		curlun->blksize = 512;
+		curlun->blkbits = 9;
+	}
+
+	num_sectors = size >> curlun->blkbits; /* File size in logic-block-size blocks */
 	min_sectors = 1;
 	if (curlun->cdrom) {
-		num_sectors &= ~3;	/* Reduce to a multiple of 2048 */
-		min_sectors = 300*4;	/* Smallest track is 300 frames */
-		if (num_sectors >= 256*60*75*4) {
-			num_sectors = (256*60*75 - 1) * 4;
+		min_sectors = 300;	/* Smallest track is 300 frames */
+		if (num_sectors >= 256*60*75) {
+			num_sectors = 256*60*75 - 1;
 			LINFO(curlun, "file too big: %s\n", filename);
 			LINFO(curlun, "using only first %d blocks\n",
 					(int) num_sectors);
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index dfed4c1..29c854b 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -9,15 +9,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/u_ether.h b/drivers/usb/gadget/u_ether.h
index c966440..8012357 100644
--- a/drivers/usb/gadget/u_ether.h
+++ b/drivers/usb/gadget/u_ether.h
@@ -9,15 +9,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef __U_ETHER_H
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index a8aa469..3a4a664 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -552,9 +552,8 @@ recycle:
 	/* Push from tty to ldisc; without low_latency set this is handled by
 	 * a workqueue, so we won't get callbacks and can hold port_lock
 	 */
-	if (tty && do_push) {
+	if (tty && do_push)
 		tty_flip_buffer_push(tty);
-	}
 
 
 	/* We want our data queue to become empty ASAP, keeping data
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index 05ba472..022baec 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -356,7 +356,7 @@ static DEVICE_ATTR(srp, S_IWUSR, NULL, usb_udc_srp_store);
 static ssize_t usb_udc_softconn_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t n)
 {
-	struct usb_udc		*udc = dev_get_drvdata(dev);
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
 
 	if (sysfs_streq(buf, "connect")) {
 		usb_gadget_connect(udc->gadget);
@@ -375,23 +375,8 @@ static ssize_t usb_udc_speed_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
 	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
-	struct usb_gadget	*gadget = udc->gadget;
-
-	switch (gadget->speed) {
-	case USB_SPEED_LOW:
-		return snprintf(buf, PAGE_SIZE, "low-speed\n");
-	case USB_SPEED_FULL:
-		return snprintf(buf, PAGE_SIZE, "full-speed\n");
-	case USB_SPEED_HIGH:
-		return snprintf(buf, PAGE_SIZE, "high-speed\n");
-	case USB_SPEED_WIRELESS:
-		return snprintf(buf, PAGE_SIZE, "wireless\n");
-	case USB_SPEED_SUPER:
-		return snprintf(buf, PAGE_SIZE, "super-speed\n");
-	case USB_SPEED_UNKNOWN:	/* FALLTHROUGH */
-	default:
-		return snprintf(buf, PAGE_SIZE, "UNKNOWN\n");
-	}
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			usb_speed_string(udc->gadget->speed));
 }
 static DEVICE_ATTR(speed, S_IRUSR, usb_udc_speed_show, NULL);
 
diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h
index 81971fb..bc78c60 100644
--- a/drivers/usb/gadget/uvc.h
+++ b/drivers/usb/gadget/uvc.h
@@ -8,7 +8,6 @@
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
- *
  */
 
 #ifndef _UVC_GADGET_H_
diff --git a/drivers/usb/gadget/uvc_queue.c b/drivers/usb/gadget/uvc_queue.c
index aa0ad34..d776adb 100644
--- a/drivers/usb/gadget/uvc_queue.c
+++ b/drivers/usb/gadget/uvc_queue.c
@@ -8,7 +8,6 @@
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c
index cfb5838..f6e083b 100644
--- a/drivers/usb/gadget/uvc_v4l2.c
+++ b/drivers/usb/gadget/uvc_v4l2.c
@@ -8,7 +8,6 @@
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/uvc_video.c b/drivers/usb/gadget/uvc_video.c
index b08f354..b0e53a8 100644
--- a/drivers/usb/gadget/uvc_video.c
+++ b/drivers/usb/gadget/uvc_video.c
@@ -8,7 +8,6 @@
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
index df6882d..668fe12 100644
--- a/drivers/usb/gadget/webcam.c
+++ b/drivers/usb/gadget/webcam.c
@@ -8,8 +8,8 @@
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
- *
  */
+
 #include <linux/kernel.h>
 #include <linux/device.h>
 #include <linux/usb/video.h>
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 00e2fd2..20697cc 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -8,15 +8,6 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index ab085f1..060e0e2 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -19,7 +19,7 @@ config USB_C67X00_HCD
 
 config USB_XHCI_HCD
 	tristate "xHCI HCD (USB 3.0) support (EXPERIMENTAL)"
-	depends on USB && PCI && EXPERIMENTAL
+	depends on USB && USB_ARCH_HAS_XHCI && EXPERIMENTAL
 	---help---
 	  The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
 	  "SuperSpeed" host controller hardware.
@@ -515,6 +515,19 @@ config USB_R8A66597_HCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called r8a66597-hcd.
 
+config USB_RENESAS_USBHS_HCD
+	tristate "Renesas USBHS HCD support"
+	depends on USB
+	depends on USB_RENESAS_USBHS
+	help
+	  The Renesas USBHS is a USB 2.0 host and peripheral controller.
+
+	  Enable this option if your board has this chip, and you want
+	  to use it as a host controller.  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called renesas-usbhs.
+
 config USB_WHCI_HCD
 	tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
@@ -544,11 +557,11 @@ config USB_HWA_HCD
 	  will be called "hwa-hc".
 
 config USB_IMX21_HCD
-       tristate "iMX21 HCD support"
-       depends on USB && ARM && MACH_MX21
+       tristate "i.MX21 HCD support"
+       depends on USB && ARM && ARCH_MXC
        help
          This driver enables support for the on-chip USB host in the
-         iMX21 processor.
+         i.MX21 processor.
 
          To compile this driver as a module, choose M here: the
          module will be called "imx21-hcd".
@@ -578,3 +591,10 @@ config USB_OCTEON_OHCI
 config USB_OCTEON2_COMMON
 	bool
 	default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI
+
+config USB_PXA168_EHCI
+	bool "Marvell PXA168 on-chip EHCI HCD support"
+	depends on USB_EHCI_HCD && ARCH_MMP
+	help
+	  Enable support for Marvell PXA168 SoC's on-chip EHCI
+	  host controller
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 624a362..ed48a5d 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -11,8 +11,9 @@ fhci-y += fhci-mem.o fhci-tds.o fhci-sched.o
 
 fhci-$(CONFIG_FHCI_DEBUG) += fhci-dbg.o
 
-xhci-hcd-y := xhci.o xhci-mem.o xhci-pci.o
+xhci-hcd-y := xhci.o xhci-mem.o
 xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
+xhci-hcd-$(CONFIG_PCI)	+= xhci-pci.o
 
 obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
 
diff --git a/drivers/usb/host/ehci-ath79.c b/drivers/usb/host/ehci-ath79.c
index 4d2e88d..afb6743 100644
--- a/drivers/usb/host/ehci-ath79.c
+++ b/drivers/usb/host/ehci-ath79.c
@@ -163,7 +163,7 @@ static int ehci_ath79_probe(struct platform_device *pdev)
 		goto err_release_region;
 	}
 
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret)
 		goto err_iounmap;
 
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 42ae574..65719e8 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -181,7 +181,7 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 	ehci->hcs_params = readl(&ehci->caps->hcs_params);
 
 	ret = usb_add_hcd(hcd, pdev->resource[1].start,
-			  IRQF_DISABLED | IRQF_SHARED);
+			  IRQF_SHARED);
 	if (ret == 0) {
 		platform_set_drvdata(pdev, hcd);
 		return ret;
@@ -293,7 +293,7 @@ static int ehci_hcd_au1xxx_drv_resume(struct device *dev)
 	/* here we "know" root ports should always stay powered */
 	ehci_port_power(ehci, 1);
 
-	hcd->state = HC_STATE_SUSPENDED;
+	ehci->rh_state = EHCI_RH_SUSPENDED;
 
 	return 0;
 }
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index 40a844c..d6d74d2 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -697,6 +697,19 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
 }
 #undef DBG_SCHED_LIMIT
 
+static const char *rh_state_string(struct ehci_hcd *ehci)
+{
+	switch (ehci->rh_state) {
+	case EHCI_RH_HALTED:
+		return "halted";
+	case EHCI_RH_SUSPENDED:
+		return "suspended";
+	case EHCI_RH_RUNNING:
+		return "running";
+	}
+	return "?";
+}
+
 static ssize_t fill_registers_buffer(struct debug_buffer *buf)
 {
 	struct usb_hcd		*hcd;
@@ -730,11 +743,11 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
 	temp = scnprintf (next, size,
 		"bus %s, device %s\n"
 		"%s\n"
-		"EHCI %x.%02x, hcd state %d\n",
+		"EHCI %x.%02x, rh state %s\n",
 		hcd->self.controller->bus->name,
 		dev_name(hcd->self.controller),
 		hcd->product_desc,
-		i >> 8, i & 0x0ff, hcd->state);
+		i >> 8, i & 0x0ff, rh_state_string(ehci));
 	size -= temp;
 	next += temp;
 
@@ -808,7 +821,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
 	next += temp;
 
 	temp = scnprintf (next, size, "uframe %04x\n",
-			ehci_readl(ehci, &ehci->regs->frame_index));
+			ehci_read_frame_index(ehci));
 	size -= temp;
 	next += temp;
 
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 34a3140..e90344a 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -134,7 +134,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
 
 	/* Don't need to set host mode here. It will be done by tdi_reset() */
 
-	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (retval != 0)
 		goto err4;
 
@@ -392,7 +392,7 @@ static int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
 
 	dev_dbg(dev, "suspending...\n");
 
-	hcd->state = HC_STATE_SUSPENDED;
+	ehci->rh_state = EHCI_RH_SUSPENDED;
 	dev->power.power_state = PMSG_SUSPEND;
 
 	/* ignore non-host interrupts */
@@ -481,7 +481,7 @@ static int ehci_fsl_mpc512x_drv_resume(struct device *dev)
 	ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]);
 
 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-	hcd->state = HC_STATE_RUNNING;
+	ehci->rh_state = EHCI_RH_RUNNING;
 	dev->power.power_state = PMSG_ON;
 
 	tmp = ehci_readl(ehci, &ehci->regs->command);
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index f72ae0b..59e8161 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -95,7 +95,7 @@ static const char	hcd_name [] = "ehci_hcd";
 #define EHCI_IO_JIFFIES		(HZ/10)		/* io watchdog > irq_thresh */
 #define EHCI_ASYNC_JIFFIES	(HZ/20)		/* async idle timeout */
 #define EHCI_SHRINK_JIFFIES	(DIV_ROUND_UP(HZ, 200) + 1)
-						/* 200-ms async qh unlink delay */
+						/* 5-ms async qh unlink delay */
 
 /* Initial IRQ latency:  faster than hw default */
 static int log2_irq_thresh = 0;		// 0 to 6
@@ -238,7 +238,7 @@ static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr,
 	error = handshake(ehci, ptr, mask, done, usec);
 	if (error) {
 		ehci_halt(ehci);
-		ehci_to_hcd(ehci)->state = HC_STATE_HALT;
+		ehci->rh_state = EHCI_RH_HALTED;
 		ehci_err(ehci, "force halt; handshake %p %08x %08x -> %d\n",
 			ptr, mask, done, error);
 	}
@@ -278,7 +278,7 @@ static int ehci_reset (struct ehci_hcd *ehci)
 	command |= CMD_RESET;
 	dbg_cmd (ehci, "reset", command);
 	ehci_writel(ehci, command, &ehci->regs->command);
-	ehci_to_hcd(ehci)->state = HC_STATE_HALT;
+	ehci->rh_state = EHCI_RH_HALTED;
 	ehci->next_statechange = jiffies;
 	retval = handshake (ehci, &ehci->regs->command,
 			    CMD_RESET, 0, 250 * 1000);
@@ -307,7 +307,7 @@ static void ehci_quiesce (struct ehci_hcd *ehci)
 	u32	temp;
 
 #ifdef DEBUG
-	if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
+	if (ehci->rh_state != EHCI_RH_RUNNING)
 		BUG ();
 #endif
 
@@ -356,7 +356,7 @@ static void ehci_iaa_watchdog(unsigned long param)
 	 */
 	if (ehci->reclaim
 			&& !timer_pending(&ehci->iaa_watchdog)
-			&& HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
+			&& ehci->rh_state == EHCI_RH_RUNNING) {
 		u32 cmd, status;
 
 		/* If we get here, IAA is *REALLY* late.  It's barely
@@ -496,7 +496,7 @@ static void ehci_work (struct ehci_hcd *ehci)
 	 * misplace IRQs, and should let us run completely without IRQs.
 	 * such lossage has been observed on both VT6202 and VT8235.
 	 */
-	if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) &&
+	if (ehci->rh_state == EHCI_RH_RUNNING &&
 			(ehci->async->qh_next.ptr != NULL ||
 			 ehci->periodic_sched != 0))
 		timer_action (ehci, TIMER_IO_WATCHDOG);
@@ -516,7 +516,7 @@ static void ehci_stop (struct usb_hcd *hcd)
 	del_timer_sync(&ehci->iaa_watchdog);
 
 	spin_lock_irq(&ehci->lock);
-	if (HC_IS_RUNNING (hcd->state))
+	if (ehci->rh_state == EHCI_RH_RUNNING)
 		ehci_quiesce (ehci);
 
 	ehci_silence_controller(ehci);
@@ -741,7 +741,7 @@ static int ehci_run (struct usb_hcd *hcd)
 	 * be started before the port switching actions could complete.
 	 */
 	down_write(&ehci_cf_port_reset_rwsem);
-	hcd->state = HC_STATE_RUNNING;
+	ehci->rh_state = EHCI_RH_RUNNING;
 	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
 	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
 	msleep(5);
@@ -768,6 +768,35 @@ static int ehci_run (struct usb_hcd *hcd)
 	return 0;
 }
 
+static int __maybe_unused ehci_setup (struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int retval;
+
+	ehci->regs = (void __iomem *)ehci->caps +
+	    HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
+	dbg_hcs_params(ehci, "reset");
+	dbg_hcc_params(ehci, "reset");
+
+	/* cache this readonly data; minimize chip reads */
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	ehci->sbrn = HCD_USB2;
+
+	retval = ehci_halt(ehci);
+	if (retval)
+		return retval;
+
+	/* data structure init */
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	ehci_reset(ehci);
+
+	return 0;
+}
+
 /*-------------------------------------------------------------------------*/
 
 static irqreturn_t ehci_irq (struct usb_hcd *hcd)
@@ -788,7 +817,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 
 	/* Shared IRQ? */
 	masked_status = status & INTR_MASK;
-	if (!masked_status || unlikely(hcd->state == HC_STATE_HALT)) {
+	if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) {
 		spin_unlock(&ehci->lock);
 		return IRQ_NONE;
 	}
@@ -952,7 +981,7 @@ static int ehci_urb_enqueue (
 static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 {
 	/* failfast */
-	if (!HC_IS_RUNNING(ehci_to_hcd(ehci)->state) && ehci->reclaim)
+	if (ehci->rh_state != EHCI_RH_RUNNING && ehci->reclaim)
 		end_unlink_async(ehci);
 
 	/* If the QH isn't linked then there's nothing we can do
@@ -1079,7 +1108,7 @@ rescan:
 		goto idle_timeout;
 	}
 
-	if (!HC_IS_RUNNING (hcd->state))
+	if (ehci->rh_state != EHCI_RH_RUNNING)
 		qh->qh_state = QH_STATE_IDLE;
 	switch (qh->qh_state) {
 	case QH_STATE_LINKED:
@@ -1166,8 +1195,7 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
 static int ehci_get_frame (struct usb_hcd *hcd)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
-	return (ehci_readl(ehci, &ehci->regs->frame_index) >> 3) %
-		ehci->periodic_size;
+	return (ehci_read_frame_index(ehci) >> 3) % ehci->periodic_size;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -1291,6 +1319,16 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ehci_grlib_driver
 #endif
 
+#ifdef CONFIG_USB_PXA168_EHCI
+#include "ehci-pxa168.c"
+#define PLATFORM_DRIVER		ehci_pxa168_driver
+#endif
+
+#ifdef CONFIG_NLM_XLR
+#include "ehci-xls.c"
+#define PLATFORM_DRIVER		ehci_xls_driver
+#endif
+
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
     !defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 4c32cb1..77bbb23 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -236,10 +236,8 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 	}
 
 	/* stop schedules, clean any completed work */
-	if (HC_IS_RUNNING(hcd->state)) {
+	if (ehci->rh_state == EHCI_RH_RUNNING)
 		ehci_quiesce (ehci);
-		hcd->state = HC_STATE_QUIESCING;
-	}
 	ehci->command = ehci_readl(ehci, &ehci->regs->command);
 	ehci_work(ehci);
 
@@ -313,7 +311,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 
 	/* turn off now-idle HC */
 	ehci_halt (ehci);
-	hcd->state = HC_STATE_SUSPENDED;
+	ehci->rh_state = EHCI_RH_SUSPENDED;
 
 	if (ehci->reclaim)
 		end_unlink_async(ehci);
@@ -382,6 +380,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 
 	/* restore CMD_RUN, framelist size, and irq threshold */
 	ehci_writel(ehci, ehci->command, &ehci->regs->command);
+	ehci->rh_state = EHCI_RH_RUNNING;
 
 	/* Some controller/firmware combinations need a delay during which
 	 * they set up the port statuses.  See Bugzilla #8190. */
@@ -451,7 +450,6 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 	}
 
 	ehci->next_statechange = jiffies + msecs_to_jiffies(5);
-	hcd->state = HC_STATE_RUNNING;
 
 	/* Now we can safely re-enable irqs */
 	ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable);
@@ -563,7 +561,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 	u32		ppcd = 0;
 
 	/* if !USB_SUSPEND, root hub timers won't get shut down ... */
-	if (!HC_IS_RUNNING(hcd->state))
+	if (ehci->rh_state != EHCI_RH_RUNNING)
 		return 0;
 
 	/* init status to no-changes */
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index 555a73c..55978fc 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -236,7 +236,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 	priv->hcd = hcd;
 	platform_set_drvdata(pdev, priv);
 
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret)
 		goto err_add;
 
diff --git a/drivers/usb/host/ehci-octeon.c b/drivers/usb/host/ehci-octeon.c
index c3ba3ed..ba1f513 100644
--- a/drivers/usb/host/ehci-octeon.c
+++ b/drivers/usb/host/ehci-octeon.c
@@ -155,7 +155,7 @@ static int ehci_octeon_drv_probe(struct platform_device *pdev)
 	/* cache this readonly data; minimize chip reads */
 	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
 
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret) {
 		dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
 		goto err3;
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 4524032..e39b029 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -228,7 +228,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 	/* cache this readonly data; minimize chip reads */
 	omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params);
 
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret) {
 		dev_err(dev, "failed to add hcd with err %d\n", ret);
 		goto err_add_hcd;
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 395bdb0..a68a2a5 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -277,7 +277,7 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
 		printk(KERN_WARNING "Orion ehci -USB phy version isn't supported.\n");
 	}
 
-	err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
+	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (err)
 		goto err4;
 
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 1102ce6..f4b627d 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -224,6 +224,11 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 			pci_dev_put(p_smbus);
 		}
 		break;
+	case PCI_VENDOR_ID_NETMOS:
+		/* MosChip frame-index-register bug */
+		ehci_info(ehci, "applying MosChip frame-index workaround\n");
+		ehci->frame_index_bug = 1;
+		break;
 	}
 
 	/* optional debug port, normally in the first BAR */
@@ -439,7 +444,7 @@ static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 	/* here we "know" root ports should always stay powered */
 	ehci_port_power(ehci, 1);
 
-	hcd->state = HC_STATE_SUSPENDED;
+	ehci->rh_state = EHCI_RH_SUSPENDED;
 	return 0;
 }
 #endif
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 64626a7..2dc32da 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -167,7 +167,7 @@ static int __devinit ps3_ehci_probe(struct ps3_system_bus_device *dev)
 
 	ps3_system_bus_set_drvdata(dev, hcd);
 
-	result = usb_add_hcd(hcd, virq, IRQF_DISABLED);
+	result = usb_add_hcd(hcd, virq, 0);
 
 	if (result) {
 		dev_dbg(&dev->core, "%s:%d: usb_add_hcd failed (%d)\n",
diff --git a/drivers/usb/host/ehci-pxa168.c b/drivers/usb/host/ehci-pxa168.c
new file mode 100644
index 0000000..ac0c16e
--- /dev/null
+++ b/drivers/usb/host/ehci-pxa168.c
@@ -0,0 +1,363 @@
+/*
+ * drivers/usb/host/ehci-pxa168.c
+ *
+ * Tanmay Upadhyay <tanmay.upadhyay@einfochips.com>
+ *
+ * Based on drivers/usb/host/ehci-orion.c
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <mach/pxa168.h>
+
+#define USB_PHY_CTRL_REG 0x4
+#define USB_PHY_PLL_REG  0x8
+#define USB_PHY_TX_REG   0xc
+
+#define FBDIV_SHIFT      4
+
+#define ICP_SHIFT        12
+#define ICP_15            2
+#define ICP_20            3
+#define ICP_25            4
+
+#define KVCO_SHIFT       15
+
+#define PLLCALI12_SHIFT  25
+#define CALI12_VDD        0
+#define CALI12_09         1
+#define CALI12_10         2
+#define CALI12_11         3
+
+#define PLLVDD12_SHIFT   27
+#define VDD12_VDD         0
+#define VDD12_10          1
+#define VDD12_11          2
+#define VDD12_12          3
+
+#define PLLVDD18_SHIFT   29
+#define VDD18_19          0
+#define VDD18_20          1
+#define VDD18_21          2
+#define VDD18_22          3
+
+
+#define PLL_READY        (1 << 23)
+#define VCOCAL_START     (1 << 21)
+#define REG_RCAL_START   (1 << 12)
+
+struct pxa168_usb_drv_data {
+	struct ehci_hcd ehci;
+	struct clk	*pxa168_usb_clk;
+	struct resource	*usb_phy_res;
+	void __iomem	*usb_phy_reg_base;
+};
+
+static int ehci_pxa168_setup(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int retval;
+
+	ehci_reset(ehci);
+	retval = ehci_halt(ehci);
+	if (retval)
+		return retval;
+
+	/*
+	 * data structure init
+	 */
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	hcd->has_tt = 1;
+
+	ehci_port_power(ehci, 0);
+
+	return retval;
+}
+
+static const struct hc_driver ehci_pxa168_hc_driver = {
+	.description = hcd_name,
+	.product_desc = "Marvell PXA168 EHCI",
+	.hcd_priv_size = sizeof(struct pxa168_usb_drv_data),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq = ehci_irq,
+	.flags = HCD_MEMORY | HCD_USB2,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset = ehci_pxa168_setup,
+	.start = ehci_run,
+	.stop = ehci_stop,
+	.shutdown = ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue = ehci_urb_enqueue,
+	.urb_dequeue = ehci_urb_dequeue,
+	.endpoint_disable = ehci_endpoint_disable,
+	.endpoint_reset = ehci_endpoint_reset,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number = ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data = ehci_hub_status_data,
+	.hub_control = ehci_hub_control,
+	.bus_suspend = ehci_bus_suspend,
+	.bus_resume = ehci_bus_resume,
+	.relinquish_port = ehci_relinquish_port,
+	.port_handed_over = ehci_port_handed_over,
+
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static int pxa168_usb_phy_init(struct platform_device *pdev)
+{
+	struct resource *res;
+	void __iomem *usb_phy_reg_base;
+	struct pxa168_usb_pdata *pdata;
+	struct pxa168_usb_drv_data *drv_data;
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	unsigned long reg_val;
+	int pll_retry_cont = 10000, err = 0;
+
+	drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv;
+	pdata = (struct pxa168_usb_pdata *)pdev->dev.platform_data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		dev_err(&pdev->dev,
+			"Found HC with no PHY register addr. Check %s setup!\n",
+			dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res),
+				ehci_pxa168_hc_driver.description)) {
+		dev_dbg(&pdev->dev, "controller already in use\n");
+		return -EBUSY;
+	}
+
+	usb_phy_reg_base = ioremap(res->start, resource_size(res));
+	if (usb_phy_reg_base == NULL) {
+		dev_dbg(&pdev->dev, "error mapping memory\n");
+		err = -EFAULT;
+		goto err1;
+	}
+	drv_data->usb_phy_reg_base = usb_phy_reg_base;
+	drv_data->usb_phy_res = res;
+
+	/* If someone wants to init USB phy in board specific way */
+	if (pdata && pdata->phy_init)
+		return pdata->phy_init(usb_phy_reg_base);
+
+	/* Power up the PHY and PLL */
+	writel(readl(usb_phy_reg_base + USB_PHY_CTRL_REG) | 0x3,
+		usb_phy_reg_base + USB_PHY_CTRL_REG);
+
+	/* Configure PHY PLL */
+	reg_val = readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~(0x7e03ffff);
+	reg_val |= (VDD18_22 << PLLVDD18_SHIFT | VDD12_12 << PLLVDD12_SHIFT |
+		CALI12_11 << PLLCALI12_SHIFT | 3 << KVCO_SHIFT |
+		ICP_15 << ICP_SHIFT | 0xee << FBDIV_SHIFT | 0xb);
+	writel(reg_val, usb_phy_reg_base + USB_PHY_PLL_REG);
+
+	/* Make sure PHY PLL is ready */
+	while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) {
+		if (!(pll_retry_cont--)) {
+			dev_dbg(&pdev->dev, "USB PHY PLL not ready\n");
+			err = -EIO;
+			goto err2;
+		}
+	}
+
+	/* Toggle VCOCAL_START bit of U2PLL for PLL calibration */
+	udelay(200);
+	writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) | VCOCAL_START,
+		usb_phy_reg_base + USB_PHY_PLL_REG);
+	udelay(40);
+	writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~VCOCAL_START,
+		usb_phy_reg_base + USB_PHY_PLL_REG);
+
+	/* Toggle REG_RCAL_START bit of U2PTX for impedance calibration */
+	udelay(400);
+	writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) | REG_RCAL_START,
+		usb_phy_reg_base + USB_PHY_TX_REG);
+	udelay(40);
+	writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) & ~REG_RCAL_START,
+		usb_phy_reg_base + USB_PHY_TX_REG);
+
+	/* Make sure PHY PLL is ready again */
+	pll_retry_cont = 0;
+	while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) {
+		if (!(pll_retry_cont--)) {
+			dev_dbg(&pdev->dev, "USB PHY PLL not ready\n");
+			err = -EIO;
+			goto err2;
+		}
+	}
+
+	return 0;
+err2:
+	iounmap(usb_phy_reg_base);
+err1:
+	release_mem_region(res->start, resource_size(res));
+	return err;
+}
+
+static int __devinit ehci_pxa168_drv_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct usb_hcd *hcd;
+	struct ehci_hcd *ehci;
+	struct pxa168_usb_drv_data *drv_data;
+	void __iomem *regs;
+	int irq, err = 0;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_debug("Initializing pxa168-SoC USB Host Controller\n");
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		dev_err(&pdev->dev,
+			"Found HC with no IRQ. Check %s setup!\n",
+			dev_name(&pdev->dev));
+		err = -ENODEV;
+		goto err1;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev,
+			"Found HC with no register addr. Check %s setup!\n",
+			dev_name(&pdev->dev));
+		err = -ENODEV;
+		goto err1;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res),
+				ehci_pxa168_hc_driver.description)) {
+		dev_dbg(&pdev->dev, "controller already in use\n");
+		err = -EBUSY;
+		goto err1;
+	}
+
+	regs = ioremap(res->start, resource_size(res));
+	if (regs == NULL) {
+		dev_dbg(&pdev->dev, "error mapping memory\n");
+		err = -EFAULT;
+		goto err2;
+	}
+
+	hcd = usb_create_hcd(&ehci_pxa168_hc_driver,
+			&pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		err = -ENOMEM;
+		goto err3;
+	}
+
+	drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv;
+
+	/* Enable USB clock */
+	drv_data->pxa168_usb_clk = clk_get(&pdev->dev, "PXA168-USBCLK");
+	if (IS_ERR(drv_data->pxa168_usb_clk)) {
+		dev_err(&pdev->dev, "Couldn't get USB clock\n");
+		err = PTR_ERR(drv_data->pxa168_usb_clk);
+		goto err4;
+	}
+	clk_enable(drv_data->pxa168_usb_clk);
+
+	err = pxa168_usb_phy_init(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "USB PHY initialization failed\n");
+		goto err5;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+	hcd->regs = regs;
+
+	ehci = hcd_to_ehci(hcd);
+	ehci->caps = hcd->regs + 0x100;
+	ehci->regs = hcd->regs + 0x100 +
+		HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+	hcd->has_tt = 1;
+	ehci->sbrn = 0x20;
+
+	err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
+	if (err)
+		goto err5;
+
+	return 0;
+
+err5:
+	clk_disable(drv_data->pxa168_usb_clk);
+	clk_put(drv_data->pxa168_usb_clk);
+err4:
+	usb_put_hcd(hcd);
+err3:
+	iounmap(regs);
+err2:
+	release_mem_region(res->start, resource_size(res));
+err1:
+	dev_err(&pdev->dev, "init %s fail, %d\n",
+		dev_name(&pdev->dev), err);
+
+	return err;
+}
+
+static int __exit ehci_pxa168_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct pxa168_usb_drv_data *drv_data =
+		(struct pxa168_usb_drv_data *)hcd->hcd_priv;
+
+	usb_remove_hcd(hcd);
+
+	/* Power down PHY & PLL */
+	writel(readl(drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG) & (~0x3),
+		drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG);
+
+	clk_disable(drv_data->pxa168_usb_clk);
+	clk_put(drv_data->pxa168_usb_clk);
+
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+	iounmap(drv_data->usb_phy_reg_base);
+	release_mem_region(drv_data->usb_phy_res->start,
+			resource_size(drv_data->usb_phy_res));
+
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+MODULE_ALIAS("platform:pxa168-ehci");
+
+static struct platform_driver ehci_pxa168_driver = {
+	.probe		= ehci_pxa168_drv_probe,
+	.remove		= __exit_p(ehci_pxa168_drv_remove),
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver.name	= "pxa168-ehci",
+};
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 0917e3a..4e4066c 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -111,8 +111,6 @@ qh_update (struct ehci_hcd *ehci, struct ehci_qh *qh, struct ehci_qtd *qtd)
 		}
 	}
 
-	/* HC must see latest qtd and qh data before we clear ACTIVE+HALT */
-	wmb ();
 	hw->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING);
 }
 
@@ -153,7 +151,7 @@ static void ehci_clear_tt_buffer_complete(struct usb_hcd *hcd,
 	spin_lock_irqsave(&ehci->lock, flags);
 	qh->clearing_tt = 0;
 	if (qh->qh_state == QH_STATE_IDLE && !list_empty(&qh->qtd_list)
-			&& HC_IS_RUNNING(hcd->state))
+			&& ehci->rh_state == EHCI_RH_RUNNING)
 		qh_link_async(ehci, qh);
 	spin_unlock_irqrestore(&ehci->lock, flags);
 }
@@ -425,7 +423,7 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 
 		/* stop scanning when we reach qtds the hc is using */
 		} else if (likely (!stopped
-				&& HC_IS_RUNNING (ehci_to_hcd(ehci)->state))) {
+				&& ehci->rh_state == EHCI_RH_RUNNING)) {
 			break;
 
 		/* scan the whole queue for unlinks whenever it stops */
@@ -433,7 +431,7 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 			stopped = 1;
 
 			/* cancel everything if we halt, suspend, etc */
-			if (!HC_IS_RUNNING(ehci_to_hcd(ehci)->state))
+			if (ehci->rh_state != EHCI_RH_RUNNING)
 				last_status = -ESHUTDOWN;
 
 			/* this qtd is active; skip it unless a previous qtd
@@ -724,7 +722,8 @@ qh_urb_transaction (
 
 	/*
 	 * control requests may need a terminating data "status" ack;
-	 * bulk ones may need a terminating short packet (zero length).
+	 * other OUT ones may need a terminating short packet
+	 * (zero length).
 	 */
 	if (likely (urb->transfer_buffer_length != 0)) {
 		int	one_more = 0;
@@ -733,7 +732,7 @@ qh_urb_transaction (
 			one_more = 1;
 			token ^= 0x0100;	/* "in" <--> "out"  */
 			token |= QTD_TOGGLE;	/* force DATA1 */
-		} else if (usb_pipebulk (urb->pipe)
+		} else if (usb_pipeout(urb->pipe)
 				&& (urb->transfer_flags & URB_ZERO_PACKET)
 				&& !(urb->transfer_buffer_length % maxpacket)) {
 			one_more = 1;
@@ -977,9 +976,8 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 			/* in case a clear of CMD_ASE didn't take yet */
 			(void)handshake(ehci, &ehci->regs->status,
 					STS_ASS, 0, 150);
-			cmd |= CMD_ASE | CMD_RUN;
+			cmd |= CMD_ASE;
 			ehci_writel(ehci, cmd, &ehci->regs->command);
-			ehci_to_hcd(ehci)->state = HC_STATE_RUNNING;
 			/* posted write need not be known to HC yet ... */
 		}
 	}
@@ -1058,7 +1056,7 @@ static struct ehci_qh *qh_append_tds (
 			 */
 			token = qtd->hw_token;
 			qtd->hw_token = HALT_BIT(ehci);
-			wmb ();
+
 			dummy = qh->dummy;
 
 			dma = dummy->qtd_dma;
@@ -1168,14 +1166,13 @@ static void end_unlink_async (struct ehci_hcd *ehci)
 
 	qh_completions (ehci, qh);
 
-	if (!list_empty (&qh->qtd_list)
-			&& HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
+	if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) {
 		qh_link_async (ehci, qh);
-	else {
+	} else {
 		/* it's not free to turn the async schedule on/off; leave it
 		 * active but idle for a while once it empties.
 		 */
-		if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state)
+		if (ehci->rh_state == EHCI_RH_RUNNING
 				&& ehci->async->qh_next.qh == NULL)
 			timer_action (ehci, TIMER_ASYNC_OFF);
 	}
@@ -1211,7 +1208,7 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	/* stop async schedule right now? */
 	if (unlikely (qh == ehci->async)) {
 		/* can't get here without STS_ASS set */
-		if (ehci_to_hcd(ehci)->state != HC_STATE_HALT
+		if (ehci->rh_state != EHCI_RH_HALTED
 				&& !ehci->reclaim) {
 			/* ... and CMD_IAAD clear */
 			ehci_writel(ehci, cmd & ~CMD_ASE,
@@ -1237,7 +1234,7 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	wmb ();
 
 	/* If the controller isn't running, we don't have to wait for it */
-	if (unlikely(!HC_IS_RUNNING(ehci_to_hcd(ehci)->state))) {
+	if (unlikely(ehci->rh_state != EHCI_RH_RUNNING)) {
 		/* if (unlikely (qh->reclaim != 0))
 		 *	this will recurse, probably not much
 		 */
@@ -1260,7 +1257,7 @@ static void scan_async (struct ehci_hcd *ehci)
 	enum ehci_timer_action	action = TIMER_IO_WATCHDOG;
 
 	timer_action_done (ehci, TIMER_ASYNC_SHRINK);
-	stopped = !HC_IS_RUNNING(ehci_to_hcd(ehci)->state);
+	stopped = (ehci->rh_state != EHCI_RH_RUNNING);
 
 	ehci->qh_scan_next = ehci->async->qh_next.qh;
 	while (ehci->qh_scan_next) {
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 9e77f1c..024b65c 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -136,7 +136,7 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev)
 	/* cache this readonly data; minimize chip reads */
 	ehci->hcs_params = readl(&ehci->caps->hcs_params);
 
-	err = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to add USB HCD\n");
 		goto fail;
@@ -270,7 +270,7 @@ static int s5p_ehci_resume(struct device *dev)
 	/* here we "know" root ports should always stay powered */
 	ehci_port_power(ehci, 1);
 
-	hcd->state = HC_STATE_SUSPENDED;
+	ehci->rh_state = EHCI_RH_SUSPENDED;
 
 	return 0;
 }
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 2abf854..2e829fa 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -36,6 +36,27 @@
 
 static int ehci_get_frame (struct usb_hcd *hcd);
 
+#ifdef CONFIG_PCI
+
+static unsigned ehci_read_frame_index(struct ehci_hcd *ehci)
+{
+	unsigned uf;
+
+	/*
+	 * The MosChip MCS9990 controller updates its microframe counter
+	 * a little before the frame counter, and occasionally we will read
+	 * the invalid intermediate value.  Avoid problems by checking the
+	 * microframe number (the low-order 3 bits); if they are 0 then
+	 * re-read the register to get the correct value.
+	 */
+	uf = ehci_readl(ehci, &ehci->regs->frame_index);
+	if (unlikely(ehci->frame_index_bug && ((uf & 7) == 0)))
+		uf = ehci_readl(ehci, &ehci->regs->frame_index);
+	return uf;
+}
+
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 /*
@@ -479,10 +500,9 @@ static int enable_periodic (struct ehci_hcd *ehci)
 	cmd = ehci_readl(ehci, &ehci->regs->command) | CMD_PSE;
 	ehci_writel(ehci, cmd, &ehci->regs->command);
 	/* posted write ... PSS happens later */
-	ehci_to_hcd(ehci)->state = HC_STATE_RUNNING;
 
 	/* make sure ehci_work scans these */
-	ehci->next_uframe = ehci_readl(ehci, &ehci->regs->frame_index)
+	ehci->next_uframe = ehci_read_frame_index(ehci)
 		% (ehci->periodic_size << 3);
 	if (unlikely(ehci->broken_periodic))
 		ehci->last_periodic_enable = ktime_get_real();
@@ -677,7 +697,7 @@ static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh)
 
 	/* reschedule QH iff another request is queued */
 	if (!list_empty(&qh->qtd_list) &&
-			HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
+			ehci->rh_state == EHCI_RH_RUNNING) {
 		rc = qh_schedule(ehci, qh);
 
 		/* An error here likely indicates handshake failure
@@ -1409,7 +1429,7 @@ iso_stream_schedule (
 		goto fail;
 	}
 
-	now = ehci_readl(ehci, &ehci->regs->frame_index) & (mod - 1);
+	now = ehci_read_frame_index(ehci) & (mod - 1);
 
 	/* Typical case: reuse current schedule, stream is still active.
 	 * Hopefully there are no gaps from the host falling behind
@@ -2275,8 +2295,8 @@ scan_periodic (struct ehci_hcd *ehci)
 	 * Touches as few pages as possible:  cache-friendly.
 	 */
 	now_uframe = ehci->next_uframe;
-	if (HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
-		clock = ehci_readl(ehci, &ehci->regs->frame_index);
+	if (ehci->rh_state == EHCI_RH_RUNNING) {
+		clock = ehci_read_frame_index(ehci);
 		clock_frame = (clock >> 3) & (ehci->periodic_size - 1);
 	} else  {
 		clock = now_uframe + mod - 1;
@@ -2310,7 +2330,7 @@ restart:
 			union ehci_shadow	temp;
 			int			live;
 
-			live = HC_IS_RUNNING (ehci_to_hcd(ehci)->state);
+			live = (ehci->rh_state == EHCI_RH_RUNNING);
 			switch (hc32_to_cpu(ehci, type)) {
 			case Q_TYPE_QH:
 				/* handle any completions */
@@ -2435,7 +2455,7 @@ restart:
 		 * We can't advance our scan without collecting the ISO
 		 * transfers that are still pending in this frame.
 		 */
-		if (incomplete && HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
+		if (incomplete && ehci->rh_state == EHCI_RH_RUNNING) {
 			ehci->next_uframe = now_uframe;
 			break;
 		}
@@ -2451,12 +2471,11 @@ restart:
 		if (now_uframe == clock) {
 			unsigned	now;
 
-			if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state)
+			if (ehci->rh_state != EHCI_RH_RUNNING
 					|| ehci->periodic_sched == 0)
 				break;
 			ehci->next_uframe = now_uframe;
-			now = ehci_readl(ehci, &ehci->regs->frame_index) &
-					(mod - 1);
+			now = ehci_read_frame_index(ehci) & (mod - 1);
 			if (now_uframe == now)
 				break;
 
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
index 86a95bb..9d9cf47 100644
--- a/drivers/usb/host/ehci-sh.c
+++ b/drivers/usb/host/ehci-sh.c
@@ -168,7 +168,7 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev)
 	clk_enable(priv->fclk);
 	clk_enable(priv->iclk);
 
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to add hcd");
 		goto fail_add_hcd;
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
index dbf1e4e..b115b0b 100644
--- a/drivers/usb/host/ehci-spear.c
+++ b/drivers/usb/host/ehci-spear.c
@@ -154,7 +154,7 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
 	ehci->clk = usbh_clk;
 
 	spear_start_ehci(ehci);
-	retval = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (retval)
 		goto fail_add_hcd;
 
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 02b2bfd..db9d1b4 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -674,7 +674,7 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 	}
 #endif
 
-	err = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to add USB HCD\n");
 		goto fail;
diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c
index 47d7496..54d1ab8 100644
--- a/drivers/usb/host/ehci-vt8500.c
+++ b/drivers/usb/host/ehci-vt8500.c
@@ -133,7 +133,7 @@ static int vt8500_ehci_drv_probe(struct platform_device *pdev)
 	ehci_port_power(ehci, 1);
 
 	ret = usb_add_hcd(hcd, pdev->resource[1].start,
-			  IRQF_DISABLED | IRQF_SHARED);
+			  IRQF_SHARED);
 	if (ret == 0) {
 		platform_set_drvdata(pdev, hcd);
 		return ret;
diff --git a/drivers/usb/host/ehci-xls.c b/drivers/usb/host/ehci-xls.c
new file mode 100644
index 0000000..fe74bd6
--- /dev/null
+++ b/drivers/usb/host/ehci-xls.c
@@ -0,0 +1,161 @@
+/*
+ * EHCI HCD for Netlogic XLS processors.
+ *
+ * (C) Copyright 2011 Netlogic Microsystems Inc.
+ *
+ *  Based on various ehci-*.c drivers
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/platform_device.h>
+
+static int ehci_xls_setup(struct usb_hcd *hcd)
+{
+	int	retval;
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+	ehci->caps = hcd->regs;
+	ehci->regs = hcd->regs +
+		HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+	dbg_hcs_params(ehci, "reset");
+	dbg_hcc_params(ehci, "reset");
+
+	/* cache this readonly data; minimize chip reads */
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	retval = ehci_halt(ehci);
+	if (retval)
+		return retval;
+
+	/* data structure init */
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	ehci_reset(ehci);
+
+	return retval;
+}
+
+int ehci_xls_probe_internal(const struct hc_driver *driver,
+	struct platform_device *pdev)
+{
+	struct usb_hcd  *hcd;
+	struct resource *res;
+	int retval, irq;
+
+	/* Get our IRQ from an earlier registered Platform Resource */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "Found HC with no IRQ. Check %s setup!\n",
+				dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+
+	/* Get our Memory Handle */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Error: MMIO Handle %s setup!\n",
+				dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto err1;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = res->end - res->start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+				driver->description)) {
+		dev_dbg(&pdev->dev, "controller already in use\n");
+		retval = -EBUSY;
+		goto err2;
+	}
+	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+
+	if (hcd->regs == NULL) {
+		dev_dbg(&pdev->dev, "error mapping memory\n");
+		retval = -EFAULT;
+		goto err3;
+	}
+
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval != 0)
+		goto err4;
+	return retval;
+
+err4:
+	iounmap(hcd->regs);
+err3:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err2:
+	usb_put_hcd(hcd);
+err1:
+	dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev),
+			retval);
+	return retval;
+}
+
+static struct hc_driver ehci_xls_hc_driver = {
+	.description	= hcd_name,
+	.product_desc	= "XLS EHCI Host Controller",
+	.hcd_priv_size	= sizeof(struct ehci_hcd),
+	.irq		= ehci_irq,
+	.flags		= HCD_USB2 | HCD_MEMORY,
+	.reset		= ehci_xls_setup,
+	.start		= ehci_run,
+	.stop		= ehci_stop,
+	.shutdown	= ehci_shutdown,
+
+	.urb_enqueue	= ehci_urb_enqueue,
+	.urb_dequeue	= ehci_urb_dequeue,
+	.endpoint_disable = ehci_endpoint_disable,
+	.endpoint_reset	= ehci_endpoint_reset,
+
+	.get_frame_number = ehci_get_frame,
+
+	.hub_status_data = ehci_hub_status_data,
+	.hub_control	= ehci_hub_control,
+	.bus_suspend	= ehci_bus_suspend,
+	.bus_resume	= ehci_bus_resume,
+	.relinquish_port = ehci_relinquish_port,
+	.port_handed_over = ehci_port_handed_over,
+
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static int ehci_xls_probe(struct platform_device *pdev)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	return ehci_xls_probe_internal(&ehci_xls_hc_driver, pdev);
+}
+
+static int ehci_xls_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+MODULE_ALIAS("ehci-xls");
+
+static struct platform_driver ehci_xls_driver = {
+	.probe		= ehci_xls_probe,
+	.remove		= ehci_xls_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name = "ehci-xls",
+	},
+};
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index cc7d337..0a5fda7 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -62,6 +62,12 @@ struct ehci_stats {
 
 #define	EHCI_MAX_ROOT_PORTS	15		/* see HCS_N_PORTS */
 
+enum ehci_rh_state {
+	EHCI_RH_HALTED,
+	EHCI_RH_SUSPENDED,
+	EHCI_RH_RUNNING
+};
+
 struct ehci_hcd {			/* one per controller */
 	/* glue to PCI and HCD framework */
 	struct ehci_caps __iomem *caps;
@@ -70,6 +76,7 @@ struct ehci_hcd {			/* one per controller */
 
 	__u32			hcs_params;	/* cached register copy */
 	spinlock_t		lock;
+	enum ehci_rh_state	rh_state;
 
 	/* async schedule support */
 	struct ehci_qh		*async;
@@ -139,6 +146,7 @@ struct ehci_hcd {			/* one per controller */
 	unsigned		fs_i_thresh:1;	/* Intel iso scheduling */
 	unsigned		use_dummy_qh:1;	/* AMD Frame List table quirk*/
 	unsigned		has_synopsys_hc_bug:1; /* Synopsys HC */
+	unsigned		frame_index_bug:1; /* MosChip (AKA NetMos) */
 
 	/* required for usb32 quirk */
 	#define OHCI_CTRL_HCFS          (3 << 6)
@@ -740,6 +748,22 @@ static inline u32 hc32_to_cpup (const struct ehci_hcd *ehci, const __hc32 *x)
 
 /*-------------------------------------------------------------------------*/
 
+#ifdef CONFIG_PCI
+
+/* For working around the MosChip frame-index-register bug */
+static unsigned ehci_read_frame_index(struct ehci_hcd *ehci);
+
+#else
+
+static inline unsigned ehci_read_frame_index(struct ehci_hcd *ehci)
+{
+	return ehci_readl(ehci, &ehci->regs->frame_index);
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
 #ifndef DEBUG
 #define STUB_DEBUG_FILES
 #endif	/* DEBUG */
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 572ea53..4ed6d19 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -621,12 +621,15 @@ static int __devinit of_fhci_probe(struct platform_device *ofdev)
 		goto err_pram;
 	}
 
-	pram_addr = cpm_muram_alloc_fixed(iprop[2], FHCI_PRAM_SIZE);
+	pram_addr = cpm_muram_alloc(FHCI_PRAM_SIZE, 64);
 	if (IS_ERR_VALUE(pram_addr)) {
 		dev_err(dev, "failed to allocate usb pram\n");
 		ret = -ENOMEM;
 		goto err_pram;
 	}
+
+	qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, QE_CR_SUBBLOCK_USB,
+		     QE_CR_PROTOCOL_UNSPECIFIED, pram_addr);
 	fhci->pram = cpm_muram_addr(pram_addr);
 
 	/* GPIOs and pins */
@@ -686,7 +689,7 @@ static int __devinit of_fhci_probe(struct platform_device *ofdev)
 	}
 
 	ret = request_irq(fhci->timer->irq, fhci_frame_limit_timer_irq,
-			  IRQF_DISABLED, "qe timer (usb)", hcd);
+			  0, "qe timer (usb)", hcd);
 	if (ret) {
 		dev_err(dev, "failed to request timer irq");
 		goto err_timer_irq;
@@ -745,7 +748,7 @@ static int __devinit of_fhci_probe(struct platform_device *ofdev)
 	out_be16(&fhci->regs->usb_event, 0xffff);
 	out_be16(&fhci->regs->usb_mask, 0);
 
-	ret = usb_add_hcd(hcd, usb_irq, IRQF_DISABLED);
+	ret = usb_add_hcd(hcd, usb_irq, 0);
 	if (ret < 0)
 		goto err_add_hcd;
 
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
index a42ef38..2df851b 100644
--- a/drivers/usb/host/fhci-sched.c
+++ b/drivers/usb/host/fhci-sched.c
@@ -1,7 +1,7 @@
 /*
  * Freescale QUICC Engine USB Host Controller Driver
  *
- * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Copyright (c) Freescale Semicondutor, Inc. 2006, 2011.
  *               Shlomi Gridish <gridish@freescale.com>
  *               Jerry Huang <Chang-Ming.Huang@freescale.com>
  * Copyright (c) Logic Product Development, Inc. 2007
@@ -810,9 +810,11 @@ void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb)
 		ed->dev_addr = usb_pipedevice(urb->pipe);
 		ed->max_pkt_size = usb_maxpacket(urb->dev, urb->pipe,
 			usb_pipeout(urb->pipe));
+		/* setup stage */
 		td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, FHCI_TA_SETUP,
 			USB_TD_TOGGLE_DATA0, urb->setup_packet, 8, 0, 0, true);
 
+		/* data stage */
 		if (data_len > 0) {
 			td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
 				usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
@@ -820,9 +822,18 @@ void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb)
 				USB_TD_TOGGLE_DATA1, data, data_len, 0, 0,
 				true);
 		}
-		td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
-			usb_pipeout(urb->pipe) ? FHCI_TA_IN : FHCI_TA_OUT,
-			USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true);
+
+		/* status stage */
+		if (data_len > 0)
+			td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+				(usb_pipeout(urb->pipe) ? FHCI_TA_IN :
+							  FHCI_TA_OUT),
+				USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true);
+		else
+			 td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+				FHCI_TA_IN,
+				USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true);
+
 		urb_state = US_CTRL_SETUP;
 		break;
 	case FHCI_TF_ISO:
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index af05718..2ee18cf 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -1891,7 +1891,7 @@ static int imx21_probe(struct platform_device *pdev)
 	dev_info(imx21->dev, "Hardware HC revision: 0x%02X\n",
 		(readl(imx21->regs + USBOTG_HWMODE) >> 16) & 0xFF);
 
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	ret = usb_add_hcd(hcd, irq, 0);
 	if (ret != 0) {
 		dev_err(imx21->dev, "usb_add_hcd() returned %d\n", ret);
 		goto failed_add_hcd;
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index baae4cc..d91e5f2 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -1639,7 +1639,7 @@ static int __devinit isp116x_probe(struct platform_device *pdev)
 		goto err6;
 	}
 
-	ret = usb_add_hcd(hcd, irq, irqflags | IRQF_DISABLED);
+	ret = usb_add_hcd(hcd, irq, irqflags);
 	if (ret)
 		goto err6;
 
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 9c37dad..e5fd8aa 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2358,7 +2358,7 @@ static int isp1362_hc_reset(struct usb_hcd *hcd)
 	unsigned long flags;
 	int clkrdy = 0;
 
-	pr_info("%s:\n", __func__);
+	pr_debug("%s:\n", __func__);
 
 	if (isp1362_hcd->board && isp1362_hcd->board->reset) {
 		isp1362_hcd->board->reset(hcd->self.controller, 1);
@@ -2395,7 +2395,7 @@ static void isp1362_hc_stop(struct usb_hcd *hcd)
 	unsigned long flags;
 	u32 tmp;
 
-	pr_info("%s:\n", __func__);
+	pr_debug("%s:\n", __func__);
 
 	del_timer_sync(&hcd->rh_timer);
 
@@ -2523,7 +2523,7 @@ static int isp1362_hc_start(struct usb_hcd *hcd)
 	u16 chipid;
 	unsigned long flags;
 
-	pr_info("%s:\n", __func__);
+	pr_debug("%s:\n", __func__);
 
 	spin_lock_irqsave(&isp1362_hcd->lock, flags);
 	chipid = isp1362_read_reg16(isp1362_hcd, HCCHIPID);
@@ -2773,7 +2773,7 @@ static int __devinit isp1362_probe(struct platform_device *pdev)
 	if (irq_res->flags & IORESOURCE_IRQ_LOWLEVEL)
 		irq_flags |= IRQF_TRIGGER_LOW;
 
-	retval = usb_add_hcd(hcd, irq, irq_flags | IRQF_DISABLED | IRQF_SHARED);
+	retval = usb_add_hcd(hcd, irq, irq_flags | IRQF_SHARED);
 	if (retval != 0)
 		goto err6;
 	pr_info("%s, irq %d\n", hcd->product_desc, irq);
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 840beda..27dfab8 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -21,8 +21,10 @@
 #include <linux/uaccess.h>
 #include <linux/io.h>
 #include <linux/mm.h>
+#include <linux/timer.h>
 #include <asm/unaligned.h>
 #include <asm/cacheflush.h>
+#include <linux/gpio.h>
 
 #include "isp1760-hcd.h"
 
@@ -39,7 +41,6 @@ struct isp1760_hcd {
 	int			int_done_map;
 	struct memory_chunk memory_pool[BLOCKS];
 	struct list_head	controlqhs, bulkqhs, interruptqhs;
-	int active_ptds;
 
 	/* periodic schedule support */
 #define	DEFAULT_I_TDPS		1024
@@ -48,6 +49,8 @@ struct isp1760_hcd {
 	unsigned long		reset_done;
 	unsigned long		next_statechange;
 	unsigned int		devflags;
+
+	int			rst_gpio;
 };
 
 static inline struct isp1760_hcd *hcd_to_priv(struct usb_hcd *hcd)
@@ -114,6 +117,7 @@ struct isp1760_qh {
 	u32 toggle;
 	u32 ping;
 	int slot;
+	int tt_buffer_dirty;	/* See USB2.0 spec section 11.17.5 */
 };
 
 struct urb_listitem {
@@ -432,6 +436,18 @@ static int isp1760_hc_setup(struct usb_hcd *hcd)
 	int result;
 	u32 scratch, hwmode;
 
+	/* low-level chip reset */
+	if (gpio_is_valid(priv->rst_gpio)) {
+		unsigned int rst_lvl;
+
+		rst_lvl = (priv->devflags &
+			   ISP1760_FLAG_RESET_ACTIVE_HIGH) ? 1 : 0;
+
+		gpio_set_value(priv->rst_gpio, rst_lvl);
+		mdelay(50);
+		gpio_set_value(priv->rst_gpio, !rst_lvl);
+	}
+
 	/* Setup HW Mode Control: This assumes a level active-low interrupt */
 	hwmode = HW_DATA_BUS_32BIT;
 
@@ -489,10 +505,6 @@ static int isp1760_hc_setup(struct usb_hcd *hcd)
 			   16 : 32, (priv->devflags & ISP1760_FLAG_ANALOG_OC) ?
 			   "analog" : "digital");
 
-	/* This is weird: at the first plug-in of a device there seems to be
-	   one packet queued that never gets returned? */
-	priv->active_ptds = -1;
-
 	/* ATL reset */
 	reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode | ALL_ATX_RESET);
 	mdelay(10);
@@ -514,83 +526,6 @@ static int isp1760_hc_setup(struct usb_hcd *hcd)
 	return priv_init(hcd);
 }
 
-static void isp1760_init_maps(struct usb_hcd *hcd)
-{
-	/*set last maps, for iso its only 1, else 32 tds bitmap*/
-	reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000);
-	reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000);
-	reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001);
-
-	reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, 0xffffffff);
-	reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, 0xffffffff);
-	reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, 0xffffffff);
-
-	reg_write32(hcd->regs, HC_BUFFER_STATUS_REG,
-						ATL_BUF_FILL | INT_BUF_FILL);
-}
-
-static void isp1760_enable_interrupts(struct usb_hcd *hcd)
-{
-	reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0);
-	reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0xffffffff);
-	reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0);
-	reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, 0xffffffff);
-	reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0);
-	reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff);
-	/* step 23 passed */
-}
-
-static int isp1760_run(struct usb_hcd *hcd)
-{
-	int retval;
-	u32 temp;
-	u32 command;
-	u32 chipid;
-
-	hcd->uses_new_polling = 1;
-
-	hcd->state = HC_STATE_RUNNING;
-	isp1760_enable_interrupts(hcd);
-	temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
-	reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN);
-
-	command = reg_read32(hcd->regs, HC_USBCMD);
-	command &= ~(CMD_LRESET|CMD_RESET);
-	command |= CMD_RUN;
-	reg_write32(hcd->regs, HC_USBCMD, command);
-
-	retval = handshake(hcd, HC_USBCMD, CMD_RUN, CMD_RUN, 250 * 1000);
-	if (retval)
-		return retval;
-
-	/*
-	 * XXX
-	 * Spec says to write FLAG_CF as last config action, priv code grabs
-	 * the semaphore while doing so.
-	 */
-	down_write(&ehci_cf_port_reset_rwsem);
-	reg_write32(hcd->regs, HC_CONFIGFLAG, FLAG_CF);
-
-	retval = handshake(hcd, HC_CONFIGFLAG, FLAG_CF, FLAG_CF, 250 * 1000);
-	up_write(&ehci_cf_port_reset_rwsem);
-	if (retval)
-		return retval;
-
-	chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG);
-	dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n",
-					chipid & 0xffff, chipid >> 16);
-
-	/* PTD Register Init Part 2, Step 28 */
-	/* enable INTs */
-	isp1760_init_maps(hcd);
-
-	/* GRR this is run-once init(), being done every time the HC starts.
-	 * So long as they're part of class devices, we can't do it init()
-	 * since the class device isn't created that early.
-	 */
-	return 0;
-}
-
 static u32 base_to_chip(u32 base)
 {
 	return ((base - 0x400) >> 3);
@@ -813,28 +748,29 @@ static void start_bus_transfer(struct usb_hcd *hcd, u32 ptd_offset, int slot,
 	WARN_ON(slots[slot].qh);
 	WARN_ON(qtd->status != QTD_PAYLOAD_ALLOC);
 
-	slots[slot].qtd = qtd;
-	slots[slot].qh = qh;
-	qh->slot = slot;
-	qtd->status = QTD_XFER_STARTED; /* Set this before writing ptd, since
-		interrupt routine may preempt and expects this value. */
-	ptd_write(hcd->regs, ptd_offset, slot, ptd);
-	priv->active_ptds++;
-
 	/* Make sure done map has not triggered from some unlinked transfer */
 	if (ptd_offset == ATL_PTD_OFFSET) {
 		priv->atl_done_map |= reg_read32(hcd->regs,
 						HC_ATL_PTD_DONEMAP_REG);
-		priv->atl_done_map &= ~(1 << qh->slot);
+		priv->atl_done_map &= ~(1 << slot);
+	} else {
+		priv->int_done_map |= reg_read32(hcd->regs,
+						HC_INT_PTD_DONEMAP_REG);
+		priv->int_done_map &= ~(1 << slot);
+	}
+
+	qh->slot = slot;
+	qtd->status = QTD_XFER_STARTED;
+	slots[slot].timestamp = jiffies;
+	slots[slot].qtd = qtd;
+	slots[slot].qh = qh;
+	ptd_write(hcd->regs, ptd_offset, slot, ptd);
 
+	if (ptd_offset == ATL_PTD_OFFSET) {
 		skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
 		skip_map &= ~(1 << qh->slot);
 		reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map);
 	} else {
-		priv->int_done_map |= reg_read32(hcd->regs,
-						HC_INT_PTD_DONEMAP_REG);
-		priv->int_done_map &= ~(1 << qh->slot);
-
 		skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
 		skip_map &= ~(1 << qh->slot);
 		reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, skip_map);
@@ -858,10 +794,7 @@ static void collect_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh,
 		if (qtd->status < QTD_XFER_COMPLETE)
 			break;
 
-		if (list_is_last(&qtd->qtd_list, &qh->qtd_list))
-			last_qtd = 1;
-		else
-			last_qtd = qtd->urb != qtd_next->urb;
+		last_qtd = last_qtd_of_urb(qtd, qh);
 
 		if ((!last_qtd) && (qtd->status == QTD_RETIRE))
 			qtd_next->status = QTD_RETIRE;
@@ -902,7 +835,7 @@ static void collect_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh,
 			urb_listitem = kmem_cache_zalloc(urb_listitem_cachep,
 								GFP_ATOMIC);
 			if (unlikely(!urb_listitem))
-				break;
+				break; /* Try again on next call */
 			urb_listitem->urb = qtd->urb;
 			list_add_tail(&urb_listitem->urb_list, urb_list);
 		}
@@ -928,6 +861,10 @@ static void enqueue_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh)
 		return;
 	}
 
+	/* Make sure this endpoint's TT buffer is clean before queueing ptds */
+	if (qh->tt_buffer_dirty)
+		return;
+
 	if (usb_pipeint(list_entry(qh->qtd_list.next, struct isp1760_qtd,
 							qtd_list)->urb->pipe)) {
 		ptd_offset = INT_PTD_OFFSET;
@@ -1168,11 +1105,9 @@ static int check_atl_transfer(struct usb_hcd *hcd, struct ptd *ptd,
 	return PTD_STATE_QTD_DONE;
 }
 
-static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
+static void handle_done_ptds(struct usb_hcd *hcd)
 {
 	struct isp1760_hcd *priv = hcd_to_priv(hcd);
-	u32 imask;
-	irqreturn_t irqret = IRQ_NONE;
 	struct ptd ptd;
 	struct isp1760_qh *qh;
 	int slot;
@@ -1181,27 +1116,14 @@ static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
 	u32 ptd_offset;
 	struct isp1760_qtd *qtd;
 	int modified;
-	static int last_active_ptds;
-	int int_skip_map, atl_skip_map;
-
-	spin_lock(&priv->lock);
-
-	if (!(hcd->state & HC_STATE_RUNNING))
-		goto leave;
-
-	imask = reg_read32(hcd->regs, HC_INTERRUPT_REG);
-	if (unlikely(!imask))
-		goto leave;
-	reg_write32(hcd->regs, HC_INTERRUPT_REG, imask); /* Clear */
+	int skip_map;
 
-	int_skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
-	atl_skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
-	priv->int_done_map |= reg_read32(hcd->regs, HC_INT_PTD_DONEMAP_REG);
-	priv->atl_done_map |= reg_read32(hcd->regs, HC_ATL_PTD_DONEMAP_REG);
-	priv->int_done_map &= ~int_skip_map;
-	priv->atl_done_map &= ~atl_skip_map;
+	skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG);
+	priv->int_done_map &= ~skip_map;
+	skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
+	priv->atl_done_map &= ~skip_map;
 
-	modified = priv->int_done_map | priv->atl_done_map;
+	modified = priv->int_done_map || priv->atl_done_map;
 
 	while (priv->int_done_map || priv->atl_done_map) {
 		if (priv->int_done_map) {
@@ -1240,7 +1162,6 @@ static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
 		slots[slot].qtd = NULL;
 		qh = slots[slot].qh;
 		slots[slot].qh = NULL;
-		priv->active_ptds--;
 		qh->slot = -1;
 
 		WARN_ON(qtd->status != QTD_XFER_STARTED);
@@ -1281,6 +1202,15 @@ static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
 
 		case PTD_STATE_URB_RETIRE:
 			qtd->status = QTD_RETIRE;
+			if ((qtd->urb->dev->speed != USB_SPEED_HIGH) &&
+					(qtd->urb->status != -EPIPE) &&
+					(qtd->urb->status != -EREMOTEIO)) {
+				qh->tt_buffer_dirty = 1;
+				if (usb_hub_clear_tt_buffer(qtd->urb))
+					/* Clear failed; let's hope things work
+					   anyway */
+					qh->tt_buffer_dirty = 0;
+			}
 			qtd = NULL;
 			qh->toggle = 0;
 			qh->ping = 0;
@@ -1311,22 +1241,28 @@ static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
 
 	if (modified)
 		schedule_ptds(hcd);
+}
 
-	/* ISP1760 Errata 2 explains that interrupts may be missed (or not
-	   happen?) if two USB devices are running simultaneously. Perhaps
-	   this happens when a PTD is finished during interrupt handling;
-	   enable SOF interrupts if PTDs are still scheduled when exiting this
-	   interrupt handler, just to be safe. */
+static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	u32 imask;
+	irqreturn_t irqret = IRQ_NONE;
 
-	if (priv->active_ptds != last_active_ptds) {
-		if (priv->active_ptds > 0)
-			reg_write32(hcd->regs, HC_INTERRUPT_ENABLE,
-						INTERRUPT_ENABLE_SOT_MASK);
-		else
-			reg_write32(hcd->regs, HC_INTERRUPT_ENABLE,
-						INTERRUPT_ENABLE_MASK);
-		last_active_ptds = priv->active_ptds;
-	}
+	spin_lock(&priv->lock);
+
+	if (!(hcd->state & HC_STATE_RUNNING))
+		goto leave;
+
+	imask = reg_read32(hcd->regs, HC_INTERRUPT_REG);
+	if (unlikely(!imask))
+		goto leave;
+	reg_write32(hcd->regs, HC_INTERRUPT_REG, imask); /* Clear */
+
+	priv->int_done_map |= reg_read32(hcd->regs, HC_INT_PTD_DONEMAP_REG);
+	priv->atl_done_map |= reg_read32(hcd->regs, HC_ATL_PTD_DONEMAP_REG);
+
+	handle_done_ptds(hcd);
 
 	irqret = IRQ_HANDLED;
 leave:
@@ -1335,6 +1271,138 @@ leave:
 	return irqret;
 }
 
+/*
+ * Workaround for problem described in chip errata 2:
+ *
+ * Sometimes interrupts are not generated when ATL (not INT?) completion occurs.
+ * One solution suggested in the errata is to use SOF interrupts _instead_of_
+ * ATL done interrupts (the "instead of" might be important since it seems
+ * enabling ATL interrupts also causes the chip to sometimes - rarely - "forget"
+ * to set the PTD's done bit in addition to not generating an interrupt!).
+ *
+ * So if we use SOF + ATL interrupts, we sometimes get stale PTDs since their
+ * done bit is not being set. This is bad - it blocks the endpoint until reboot.
+ *
+ * If we use SOF interrupts only, we get latency between ptd completion and the
+ * actual handling. This is very noticeable in testusb runs which takes several
+ * minutes longer without ATL interrupts.
+ *
+ * A better solution is to run the code below every SLOT_CHECK_PERIOD ms. If it
+ * finds active ATL slots which are older than SLOT_TIMEOUT ms, it checks the
+ * slot's ACTIVE and VALID bits. If these are not set, the ptd is considered
+ * completed and its done map bit is set.
+ *
+ * The values of SLOT_TIMEOUT and SLOT_CHECK_PERIOD have been arbitrarily chosen
+ * not to cause too much lag when this HW bug occurs, while still hopefully
+ * ensuring that the check does not falsely trigger.
+ */
+#define SLOT_TIMEOUT 300
+#define SLOT_CHECK_PERIOD 200
+static struct timer_list errata2_timer;
+
+void errata2_function(unsigned long data)
+{
+	struct usb_hcd *hcd = (struct usb_hcd *) data;
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	int slot;
+	struct ptd ptd;
+	unsigned long spinflags;
+
+	spin_lock_irqsave(&priv->lock, spinflags);
+
+	for (slot = 0; slot < 32; slot++)
+		if (priv->atl_slots[slot].qh && time_after(jiffies,
+					priv->atl_slots[slot].timestamp +
+					SLOT_TIMEOUT * HZ / 1000)) {
+			ptd_read(hcd->regs, ATL_PTD_OFFSET, slot, &ptd);
+			if (!FROM_DW0_VALID(ptd.dw0) &&
+					!FROM_DW3_ACTIVE(ptd.dw3))
+				priv->atl_done_map |= 1 << slot;
+		}
+
+	if (priv->atl_done_map)
+		handle_done_ptds(hcd);
+
+	spin_unlock_irqrestore(&priv->lock, spinflags);
+
+	errata2_timer.expires = jiffies + SLOT_CHECK_PERIOD * HZ / 1000;
+	add_timer(&errata2_timer);
+}
+
+static int isp1760_run(struct usb_hcd *hcd)
+{
+	int retval;
+	u32 temp;
+	u32 command;
+	u32 chipid;
+
+	hcd->uses_new_polling = 1;
+
+	hcd->state = HC_STATE_RUNNING;
+
+	/* Set PTD interrupt AND & OR maps */
+	reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0);
+	reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0xffffffff);
+	reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0);
+	reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, 0xffffffff);
+	reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0);
+	reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff);
+	/* step 23 passed */
+
+	temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
+	reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN);
+
+	command = reg_read32(hcd->regs, HC_USBCMD);
+	command &= ~(CMD_LRESET|CMD_RESET);
+	command |= CMD_RUN;
+	reg_write32(hcd->regs, HC_USBCMD, command);
+
+	retval = handshake(hcd, HC_USBCMD, CMD_RUN, CMD_RUN, 250 * 1000);
+	if (retval)
+		return retval;
+
+	/*
+	 * XXX
+	 * Spec says to write FLAG_CF as last config action, priv code grabs
+	 * the semaphore while doing so.
+	 */
+	down_write(&ehci_cf_port_reset_rwsem);
+	reg_write32(hcd->regs, HC_CONFIGFLAG, FLAG_CF);
+
+	retval = handshake(hcd, HC_CONFIGFLAG, FLAG_CF, FLAG_CF, 250 * 1000);
+	up_write(&ehci_cf_port_reset_rwsem);
+	if (retval)
+		return retval;
+
+	init_timer(&errata2_timer);
+	errata2_timer.function = errata2_function;
+	errata2_timer.data = (unsigned long) hcd;
+	errata2_timer.expires = jiffies + SLOT_CHECK_PERIOD * HZ / 1000;
+	add_timer(&errata2_timer);
+
+	chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG);
+	dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n",
+					chipid & 0xffff, chipid >> 16);
+
+	/* PTD Register Init Part 2, Step 28 */
+
+	/* Setup registers controlling PTD checking */
+	reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000);
+	reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000);
+	reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001);
+	reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, 0xffffffff);
+	reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, 0xffffffff);
+	reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, 0xffffffff);
+	reg_write32(hcd->regs, HC_BUFFER_STATUS_REG,
+						ATL_BUF_FILL | INT_BUF_FILL);
+
+	/* GRR this is run-once init(), being done every time the HC starts.
+	 * So long as they're part of class devices, we can't do it init()
+	 * since the class device isn't created that early.
+	 */
+	return 0;
+}
+
 static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len)
 {
 	qtd->data_buffer = databuffer;
@@ -1503,7 +1571,6 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 	packetize_urb(hcd, urb, &new_qtds, mem_flags);
 	if (list_empty(&new_qtds))
 		return -ENOMEM;
-	urb->hcpriv = NULL; /* Used to signal unlink to interrupt handler */
 
 	retval = 0;
 	spin_lock_irqsave(&priv->lock, spinflags);
@@ -1531,6 +1598,7 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 		qh = qh_alloc(GFP_ATOMIC);
 		if (!qh) {
 			retval = -ENOMEM;
+			usb_hcd_unlink_urb_from_ep(hcd, urb);
 			goto out;
 		}
 		list_add_tail(&qh->qh_list, ep_queue);
@@ -1570,7 +1638,41 @@ static void kill_transfer(struct usb_hcd *hcd, struct urb *urb,
 	}
 
 	qh->slot = -1;
-	priv->active_ptds--;
+}
+
+/*
+ * Retire the qtds beginning at 'qtd' and belonging all to the same urb, killing
+ * any active transfer belonging to the urb in the process.
+ */
+static void dequeue_urb_from_qtd(struct usb_hcd *hcd, struct isp1760_qh *qh,
+						struct isp1760_qtd *qtd)
+{
+	struct urb *urb;
+	int urb_was_running;
+
+	urb = qtd->urb;
+	urb_was_running = 0;
+	list_for_each_entry_from(qtd, &qh->qtd_list, qtd_list) {
+		if (qtd->urb != urb)
+			break;
+
+		if (qtd->status >= QTD_XFER_STARTED)
+			urb_was_running = 1;
+		if (last_qtd_of_urb(qtd, qh) &&
+					(qtd->status >= QTD_XFER_COMPLETE))
+			urb_was_running = 0;
+
+		if (qtd->status == QTD_XFER_STARTED)
+			kill_transfer(hcd, urb, qh);
+		qtd->status = QTD_RETIRE;
+	}
+
+	if ((urb->dev->speed != USB_SPEED_HIGH) && urb_was_running) {
+		qh->tt_buffer_dirty = 1;
+		if (usb_hub_clear_tt_buffer(urb))
+			/* Clear failed; let's hope things work anyway */
+			qh->tt_buffer_dirty = 0;
+	}
 }
 
 static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
@@ -1595,9 +1697,8 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
 
 	list_for_each_entry(qtd, &qh->qtd_list, qtd_list)
 		if (qtd->urb == urb) {
-			if (qtd->status == QTD_XFER_STARTED)
-				kill_transfer(hcd, urb, qh);
-			qtd->status = QTD_RETIRE;
+			dequeue_urb_from_qtd(hcd, qh, qtd);
+			break;
 		}
 
 	urb->status = status;
@@ -1622,12 +1723,11 @@ static void isp1760_endpoint_disable(struct usb_hcd *hcd,
 	if (!qh)
 		goto out;
 
-	list_for_each_entry(qtd, &qh->qtd_list, qtd_list) {
-		if (qtd->status == QTD_XFER_STARTED)
-			kill_transfer(hcd, qtd->urb, qh);
-		qtd->status = QTD_RETIRE;
-		qtd->urb->status = -ECONNRESET;
-	}
+	list_for_each_entry(qtd, &qh->qtd_list, qtd_list)
+		if (qtd->status != QTD_RETIRE) {
+			dequeue_urb_from_qtd(hcd, qh, qtd);
+			qtd->urb->status = -ECONNRESET;
+		}
 
 	ep->hcpriv = NULL;
 	/* Cannot free qh here since it will be parsed by schedule_ptds() */
@@ -2021,6 +2121,8 @@ static void isp1760_stop(struct usb_hcd *hcd)
 	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 	u32 temp;
 
+	del_timer(&errata2_timer);
+
 	isp1760_hub_control(hcd, ClearPortFeature, USB_PORT_FEAT_POWER,	1,
 			NULL, 0);
 	mdelay(20);
@@ -2048,6 +2150,23 @@ static void isp1760_shutdown(struct usb_hcd *hcd)
 	reg_write32(hcd->regs, HC_USBCMD, command);
 }
 
+static void isp1760_clear_tt_buffer_complete(struct usb_hcd *hcd,
+						struct usb_host_endpoint *ep)
+{
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	struct isp1760_qh *qh = ep->hcpriv;
+	unsigned long spinflags;
+
+	if (!qh)
+		return;
+
+	spin_lock_irqsave(&priv->lock, spinflags);
+	qh->tt_buffer_dirty = 0;
+	schedule_ptds(hcd);
+	spin_unlock_irqrestore(&priv->lock, spinflags);
+}
+
+
 static const struct hc_driver isp1760_hc_driver = {
 	.description		= "isp1760-hcd",
 	.product_desc		= "NXP ISP1760 USB Host Controller",
@@ -2064,6 +2183,7 @@ static const struct hc_driver isp1760_hc_driver = {
 	.get_frame_number	= isp1760_get_frame,
 	.hub_status_data	= isp1760_hub_status_data,
 	.hub_control		= isp1760_hub_control,
+	.clear_tt_buffer_complete	= isp1760_clear_tt_buffer_complete,
 };
 
 int __init init_kmem_once(void)
@@ -2102,6 +2222,7 @@ void deinit_kmem_cache(void)
 
 struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len,
 				 int irq, unsigned long irqflags,
+				 int rst_gpio,
 				 struct device *dev, const char *busname,
 				 unsigned int devflags)
 {
@@ -2121,6 +2242,7 @@ struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len,
 
 	priv = hcd_to_priv(hcd);
 	priv->devflags = devflags;
+	priv->rst_gpio = rst_gpio;
 	init_memory(priv);
 	hcd->regs = ioremap(res_start, res_len);
 	if (!hcd->regs) {
diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h
index 014a7df..33dc79c 100644
--- a/drivers/usb/host/isp1760-hcd.h
+++ b/drivers/usb/host/isp1760-hcd.h
@@ -4,6 +4,7 @@
 /* exports for if */
 struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len,
 				 int irq, unsigned long irqflags,
+				 int rst_gpio,
 				 struct device *dev, const char *busname,
 				 unsigned int devflags);
 int init_kmem_once(void);
@@ -73,7 +74,6 @@ void deinit_kmem_cache(void);
 #define HC_EOT_INT		(1 << 3)
 #define HC_SOT_INT		(1 << 1)
 #define INTERRUPT_ENABLE_MASK	(HC_INTL_INT | HC_ATL_INT)
-#define INTERRUPT_ENABLE_SOT_MASK	(HC_SOT_INT)
 
 #define HC_ISO_IRQ_MASK_OR_REG	0x318
 #define HC_INT_IRQ_MASK_OR_REG	0x31C
@@ -107,6 +107,7 @@ struct ptd {
 struct slotinfo {
 	struct isp1760_qh *qh;
 	struct isp1760_qtd *qtd;
+	unsigned long timestamp;
 };
 
 
@@ -126,6 +127,7 @@ typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh,
 #define ISP1760_FLAG_ISP1761		0x00000040 /* Chip is ISP1761 */
 #define ISP1760_FLAG_INTR_POL_HIGH	0x00000080 /* Interrupt polarity active high */
 #define ISP1760_FLAG_INTR_EDGE_TRIG	0x00000100 /* Interrupt edge triggered */
+#define ISP1760_FLAG_RESET_ACTIVE_HIGH	0x80000000 /* RESET GPIO active high */
 
 /* chip memory management */
 struct memory_chunk {
@@ -188,6 +190,7 @@ struct memory_chunk {
 #define DW3_BABBLE_BIT			(1 << 29)
 #define DW3_HALT_BIT			(1 << 30)
 #define DW3_ACTIVE_BIT			(1 << 31)
+#define FROM_DW3_ACTIVE(x)		(((x) >> 31) & 0x01)
 
 #define INT_UNDERRUN			(1 << 2)
 #define INT_BABBLE			(1 << 1)
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index 7ee3005..2c7fc83 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -17,19 +17,28 @@
 
 #include "isp1760-hcd.h"
 
-#ifdef CONFIG_PPC_OF
+#ifdef CONFIG_OF
+#include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
 #endif
 
 #ifdef CONFIG_PCI
 #include <linux/pci.h>
 #endif
 
-#ifdef CONFIG_PPC_OF
+#ifdef CONFIG_OF
+struct isp1760 {
+	struct usb_hcd *hcd;
+	int rst_gpio;
+};
+
 static int of_isp1760_probe(struct platform_device *dev)
 {
-	struct usb_hcd *hcd;
+	struct isp1760 *drvdata;
 	struct device_node *dp = dev->dev.of_node;
 	struct resource *res;
 	struct resource memory;
@@ -39,6 +48,11 @@ static int of_isp1760_probe(struct platform_device *dev)
 	int ret;
 	const unsigned int *prop;
 	unsigned int devflags = 0;
+	enum of_gpio_flags gpio_flags;
+
+	drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
 
 	ret = of_address_to_resource(dp, 0, &memory);
 	if (ret)
@@ -78,32 +92,57 @@ static int of_isp1760_probe(struct platform_device *dev)
 	if (of_get_property(dp, "dreq-polarity", NULL) != NULL)
 		devflags |= ISP1760_FLAG_DREQ_POL_HIGH;
 
-	hcd = isp1760_register(memory.start, res_len, virq,
-		IRQF_SHARED | IRQF_DISABLED, &dev->dev, dev_name(&dev->dev),
-		devflags);
-	if (IS_ERR(hcd)) {
-		ret = PTR_ERR(hcd);
-		goto release_reg;
+	drvdata->rst_gpio = of_get_gpio_flags(dp, 0, &gpio_flags);
+	if (gpio_is_valid(drvdata->rst_gpio)) {
+		ret = gpio_request(drvdata->rst_gpio, dev_name(&dev->dev));
+		if (!ret) {
+			if (!(gpio_flags & OF_GPIO_ACTIVE_LOW)) {
+				devflags |= ISP1760_FLAG_RESET_ACTIVE_HIGH;
+				gpio_direction_output(drvdata->rst_gpio, 0);
+			} else {
+				gpio_direction_output(drvdata->rst_gpio, 1);
+			}
+		} else {
+			drvdata->rst_gpio = ret;
+		}
 	}
 
-	dev_set_drvdata(&dev->dev, hcd);
+	drvdata->hcd = isp1760_register(memory.start, res_len, virq,
+					IRQF_SHARED, drvdata->rst_gpio,
+					&dev->dev, dev_name(&dev->dev),
+					devflags);
+	if (IS_ERR(drvdata->hcd)) {
+		ret = PTR_ERR(drvdata->hcd);
+		goto free_gpio;
+	}
+
+	dev_set_drvdata(&dev->dev, drvdata);
 	return ret;
 
+free_gpio:
+	if (gpio_is_valid(drvdata->rst_gpio))
+		gpio_free(drvdata->rst_gpio);
 release_reg:
 	release_mem_region(memory.start, res_len);
+	kfree(drvdata);
 	return ret;
 }
 
 static int of_isp1760_remove(struct platform_device *dev)
 {
-	struct usb_hcd *hcd = dev_get_drvdata(&dev->dev);
+	struct isp1760 *drvdata = dev_get_drvdata(&dev->dev);
 
 	dev_set_drvdata(&dev->dev, NULL);
 
-	usb_remove_hcd(hcd);
-	iounmap(hcd->regs);
-	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-	usb_put_hcd(hcd);
+	usb_remove_hcd(drvdata->hcd);
+	iounmap(drvdata->hcd->regs);
+	release_mem_region(drvdata->hcd->rsrc_start, drvdata->hcd->rsrc_len);
+	usb_put_hcd(drvdata->hcd);
+
+	if (gpio_is_valid(drvdata->rst_gpio))
+		gpio_free(drvdata->rst_gpio);
+
+	kfree(drvdata);
 	return 0;
 }
 
@@ -240,7 +279,7 @@ static int __devinit isp1761_pci_probe(struct pci_dev *dev,
 
 	dev->dev.dma_mask = NULL;
 	hcd = isp1760_register(pci_mem_phy0, memlength, dev->irq,
-		IRQF_SHARED | IRQF_DISABLED, &dev->dev, dev_name(&dev->dev),
+		IRQF_SHARED, -ENOENT, &dev->dev, dev_name(&dev->dev),
 		devflags);
 	if (IS_ERR(hcd)) {
 		ret_status = -ENODEV;
@@ -313,7 +352,7 @@ static int __devinit isp1760_plat_probe(struct platform_device *pdev)
 	resource_size_t mem_size;
 	struct isp1760_platform_data *priv = pdev->dev.platform_data;
 	unsigned int devflags = 0;
-	unsigned long irqflags = IRQF_SHARED | IRQF_DISABLED;
+	unsigned long irqflags = IRQF_SHARED;
 
 	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!mem_res) {
@@ -351,7 +390,8 @@ static int __devinit isp1760_plat_probe(struct platform_device *pdev)
 	}
 
 	hcd = isp1760_register(mem_res->start, mem_size, irq_res->start,
-			       irqflags, &pdev->dev, dev_name(&pdev->dev), devflags);
+			       irqflags, -ENOENT,
+			       &pdev->dev, dev_name(&pdev->dev), devflags);
 	if (IS_ERR(hcd)) {
 		pr_warning("isp1760: Failed to register the HCD device\n");
 		ret = -ENODEV;
@@ -396,7 +436,7 @@ static int __init isp1760_init(void)
 	ret = platform_driver_register(&isp1760_plat_driver);
 	if (!ret)
 		any_ret = 0;
-#ifdef CONFIG_PPC_OF
+#ifdef CONFIG_OF
 	ret = platform_driver_register(&isp1760_of_driver);
 	if (!ret)
 		any_ret = 0;
@@ -416,7 +456,7 @@ module_init(isp1760_init);
 static void __exit isp1760_exit(void)
 {
 	platform_driver_unregister(&isp1760_plat_driver);
-#ifdef CONFIG_PPC_OF
+#ifdef CONFIG_OF
 	platform_driver_unregister(&isp1760_of_driver);
 #endif
 #ifdef CONFIG_PCI
diff --git a/drivers/usb/host/ohci-ath79.c b/drivers/usb/host/ohci-ath79.c
index c620c50..18d574d 100644
--- a/drivers/usb/host/ohci-ath79.c
+++ b/drivers/usb/host/ohci-ath79.c
@@ -111,7 +111,7 @@ static int ohci_ath79_probe(struct platform_device *pdev)
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	ret = usb_add_hcd(hcd, irq, 0);
 	if (ret)
 		goto err_stop_hcd;
 
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 958d985..6b7bc50 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -218,7 +218,7 @@ static int ohci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
 	ret = usb_add_hcd(hcd, pdev->resource[1].start,
-			  IRQF_DISABLED | IRQF_SHARED);
+			  IRQF_SHARED);
 	if (ret == 0) {
 		platform_set_drvdata(pdev, hcd);
 		return ret;
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index 6aca2c4..8435097 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -344,7 +344,7 @@ static int usb_hcd_da8xx_probe(const struct hc_driver *driver,
 		error = -ENODEV;
 		goto err4;
 	}
-	error = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	error = usb_add_hcd(hcd, irq, 0);
 	if (error)
 		goto err4;
 
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index 4e68161..dc45d48 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -81,7 +81,7 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
-	retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED);
+	retval = usb_add_hcd(hcd, pdev->resource[1].start, 0);
 	if (retval == 0)
 		return retval;
 
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index f9cf3f0..34efd47 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1114,6 +1114,11 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ohci_hcd_ath79_driver
 #endif
 
+#ifdef CONFIG_NLM_XLR
+#include "ohci-xls.c"
+#define PLATFORM_DRIVER		ohci_xls_driver
+#endif
+
 #if	!defined(PCI_DRIVER) &&		\
 	!defined(PLATFORM_DRIVER) &&	\
 	!defined(OMAP1_PLATFORM_DRIVER) &&	\
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 9154615..2f00040 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -356,10 +356,7 @@ static void ohci_finish_controller_resume(struct usb_hcd *hcd)
 		msleep(20);
 	}
 
-	/* Does the root hub have a port wakeup pending? */
-	if (ohci_readl(ohci, &ohci->regs->intrstatus) &
-			(OHCI_INTR_RD | OHCI_INTR_RHSC))
-		usb_hcd_resume_root_hub(hcd);
+	usb_hcd_resume_root_hub(hcd);
 }
 
 /* Carry out polling-, autostop-, and autoresume-related state changes */
diff --git a/drivers/usb/host/ohci-octeon.c b/drivers/usb/host/ohci-octeon.c
index d8b4564..d469bf9 100644
--- a/drivers/usb/host/ohci-octeon.c
+++ b/drivers/usb/host/ohci-octeon.c
@@ -164,7 +164,7 @@ static int ohci_octeon_drv_probe(struct platform_device *pdev)
 
 	ohci_hcd_init(ohci);
 
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret) {
 		dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
 		goto err3;
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 5645f70..e4b8782 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -14,7 +14,7 @@
  * This file is licenced under the GPL.
  */
 
-#include <linux/signal.h>	/* IRQF_DISABLED */
+#include <linux/signal.h>
 #include <linux/jiffies.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
@@ -363,7 +363,7 @@ static int usb_hcd_omap_probe (const struct hc_driver *driver,
 		retval = -ENXIO;
 		goto err3;
 	}
-	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	retval = usb_add_hcd(hcd, irq, 0);
 	if (retval)
 		goto err3;
 
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 6048f2f..516ebc4 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -149,7 +149,7 @@ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
 
 	res = platform_get_resource_byname(pdev,
 				IORESOURCE_MEM, "ohci");
-	if (!ret) {
+	if (!res) {
 		dev_err(dev, "UHH OHCI get resource failed\n");
 		return -ENOMEM;
 	}
@@ -180,7 +180,7 @@ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	ret = usb_add_hcd(hcd, irq, 0);
 	if (ret) {
 		dev_dbg(dev, "failed to add hcd with err %d\n", ret);
 		goto err_add_hcd;
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index 653d6a6..9ad8bee 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -398,7 +398,7 @@ static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
 	ohci_hcd_init(ohci);
 
 	dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq);
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	ret = usb_add_hcd(hcd, irq, 0);
 	if (ret == 0)
 		return ret;
 
diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c
index 28467e2..f13d08f 100644
--- a/drivers/usb/host/ohci-pnx8550.c
+++ b/drivers/usb/host/ohci-pnx8550.c
@@ -107,7 +107,7 @@ int usb_hcd_pnx8550_probe (const struct hc_driver *driver,
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
-	retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED);
+	retval = usb_add_hcd(hcd, dev->resource[1].start, 0);
 	if (retval == 0)
 		return retval;
 
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
index 0c12f4e..d24cc89d 100644
--- a/drivers/usb/host/ohci-ppc-of.c
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -143,7 +143,7 @@ static int __devinit ohci_hcd_ppc_of_probe(struct platform_device *op)
 
 	ohci_hcd_init(ohci);
 
-	rv = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	rv = usb_add_hcd(hcd, irq, 0);
 	if (rv == 0)
 		return 0;
 
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index c0f595c..1514b70 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -80,7 +80,7 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver,
 #endif
 	ohci_hcd_init(ohci);
 
-	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	retval = usb_add_hcd(hcd, irq, 0);
 	if (retval == 0)
 		return retval;
 
diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c
index 7009504..6fd4fa1 100644
--- a/drivers/usb/host/ohci-ps3.c
+++ b/drivers/usb/host/ohci-ps3.c
@@ -164,7 +164,7 @@ static int __devinit ps3_ohci_probe(struct ps3_system_bus_device *dev)
 
 	ps3_system_bus_set_drvdata(dev, hcd);
 
-	result = usb_add_hcd(hcd, virq, IRQF_DISABLED);
+	result = usb_add_hcd(hcd, virq, 0);
 
 	if (result) {
 		dev_dbg(&dev->core, "%s:%d: usb_add_hcd failed (%d)\n",
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 80be547..29dfefe 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -359,7 +359,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
-	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	retval = usb_add_hcd(hcd, irq, 0);
 	if (retval == 0)
 		return retval;
 
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index dd24fc1..15dc51d 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -428,7 +428,7 @@ static struct ed *ed_get (
 		ed->type = usb_pipetype(pipe);
 
 		info |= (ep->desc.bEndpointAddress & ~USB_DIR_IN) << 7;
-		info |= le16_to_cpu(ep->desc.wMaxPacketSize) << 16;
+		info |= usb_endpoint_maxp(&ep->desc) << 16;
 		if (udev->speed == USB_SPEED_LOW)
 			info |= ED_LOWSPEED;
 		/* only control transfers store pids in tds */
@@ -444,7 +444,7 @@ static struct ed *ed_get (
 				ed->load = usb_calc_bus_time (
 					udev->speed, !is_out,
 					ed->type == PIPE_ISOCHRONOUS,
-					le16_to_cpu(ep->desc.wMaxPacketSize))
+					usb_endpoint_maxp(&ep->desc))
 						/ 1000;
 			}
 		}
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 7c9a4d5..a1877c4 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -384,7 +384,7 @@ static int usb_hcd_s3c2410_probe(const struct hc_driver *driver,
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
-	retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED);
+	retval = usb_add_hcd(hcd, dev->resource[1].start, 0);
 	if (retval != 0)
 		goto err_ioremap;
 
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index 4204d972..4bde4f9 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -143,7 +143,7 @@ int usb_hcd_sa1111_probe (const struct hc_driver *driver,
 	sa1111_start_hc(dev);
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
-	retval = usb_add_hcd(hcd, dev->irq[1], IRQF_DISABLED);
+	retval = usb_add_hcd(hcd, dev->irq[1], 0);
 	if (retval == 0)
 		return retval;
 
diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c
index 14cecb5..afc4eb6 100644
--- a/drivers/usb/host/ohci-sh.c
+++ b/drivers/usb/host/ohci-sh.c
@@ -109,7 +109,7 @@ static int ohci_hcd_sh_probe(struct platform_device *pdev)
 	hcd->regs = (void __iomem *)res->start;
 	hcd->rsrc_start = res->start;
 	hcd->rsrc_len = resource_size(res);
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret != 0) {
 		err("Failed to add hcd");
 		usb_put_hcd(hcd);
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c
index 78918ca..968cea2 100644
--- a/drivers/usb/host/ohci-sm501.c
+++ b/drivers/usb/host/ohci-sm501.c
@@ -165,7 +165,7 @@ static int ohci_hcd_sm501_drv_probe(struct platform_device *pdev)
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
-	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (retval)
 		goto err5;
 
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
index 4fd4bea..6987465 100644
--- a/drivers/usb/host/ohci-spear.c
+++ b/drivers/usb/host/ohci-spear.c
@@ -152,7 +152,7 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
 	spear_start_ohci(ohci_p);
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
-	retval = usb_add_hcd(hcd, platform_get_irq(pdev, 0), IRQF_DISABLED);
+	retval = usb_add_hcd(hcd, platform_get_irq(pdev, 0), 0);
 	if (retval == 0)
 		return retval;
 
diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c
index c4aea3b..5ba1859 100644
--- a/drivers/usb/host/ohci-ssb.c
+++ b/drivers/usb/host/ohci-ssb.c
@@ -169,7 +169,7 @@ static int ssb_ohci_attach(struct ssb_device *dev)
 	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
 	if (!hcd->regs)
 		goto err_put_hcd;
-	err = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
+	err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
 	if (err)
 		goto err_iounmap;
 
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index 57ad127..06331d9 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -244,7 +244,7 @@ static int __devinit ohci_hcd_tmio_drv_probe(struct platform_device *dev)
 	ohci = hcd_to_ohci(hcd);
 	ohci_hcd_init(ohci);
 
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	ret = usb_add_hcd(hcd, irq, 0);
 	if (ret)
 		goto err_add_hcd;
 
diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c
new file mode 100644
index 0000000..a3a9c6f
--- /dev/null
+++ b/drivers/usb/host/ohci-xls.c
@@ -0,0 +1,151 @@
+/*
+ * OHCI HCD for Netlogic XLS processors.
+ *
+ * (C) Copyright 2011 Netlogic Microsystems Inc.
+ *
+ *  Based on ohci-au1xxx.c, and other Linux OHCI drivers.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/signal.h>
+
+static int ohci_xls_probe_internal(const struct hc_driver *driver,
+			struct platform_device *dev)
+{
+	struct resource *res;
+	struct usb_hcd *hcd;
+	int retval, irq;
+
+	/* Get our IRQ from an earlier registered Platform Resource */
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0) {
+		dev_err(&dev->dev, "Found HC with no IRQ\n");
+		return -ENODEV;
+	}
+
+	/* Get our Memory Handle */
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&dev->dev, "MMIO Handle incorrect!\n");
+		return -ENODEV;
+	}
+
+	hcd = usb_create_hcd(driver, &dev->dev, "XLS");
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto err1;
+	}
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = res->end - res->start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+			driver->description)) {
+		dev_dbg(&dev->dev, "Controller already in use\n");
+		retval = -EBUSY;
+		goto err2;
+	}
+
+	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+	if (hcd->regs == NULL) {
+		dev_dbg(&dev->dev, "error mapping memory\n");
+		retval = -EFAULT;
+		goto err3;
+	}
+
+	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	if (retval != 0)
+		goto err4;
+	return retval;
+
+err4:
+	iounmap(hcd->regs);
+err3:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err2:
+	usb_put_hcd(hcd);
+err1:
+	dev_err(&dev->dev, "init fail, %d\n", retval);
+	return retval;
+}
+
+static int ohci_xls_reset(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+	ohci_hcd_init(ohci);
+	return ohci_init(ohci);
+}
+
+static int __devinit ohci_xls_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci;
+	int ret;
+
+	ohci = hcd_to_ohci(hcd);
+	ret = ohci_run(ohci);
+	if (ret < 0) {
+		err("can't start %s", hcd->self.bus_name);
+		ohci_stop(hcd);
+		return ret;
+	}
+	return 0;
+}
+
+static struct hc_driver ohci_xls_hc_driver = {
+	.description	= hcd_name,
+	.product_desc	= "XLS OHCI Host Controller",
+	.hcd_priv_size	= sizeof(struct ohci_hcd),
+	.irq		= ohci_irq,
+	.flags		= HCD_MEMORY | HCD_USB11,
+	.reset		= ohci_xls_reset,
+	.start		= ohci_xls_start,
+	.stop		= ohci_stop,
+	.shutdown	= ohci_shutdown,
+	.urb_enqueue	= ohci_urb_enqueue,
+	.urb_dequeue	= ohci_urb_dequeue,
+	.endpoint_disable = ohci_endpoint_disable,
+	.get_frame_number = ohci_get_frame,
+	.hub_status_data = ohci_hub_status_data,
+	.hub_control	= ohci_hub_control,
+#ifdef CONFIG_PM
+	.bus_suspend	= ohci_bus_suspend,
+	.bus_resume	= ohci_bus_resume,
+#endif
+	.start_port_reset = ohci_start_port_reset,
+};
+
+static int ohci_xls_probe(struct platform_device *dev)
+{
+	int ret;
+
+	pr_debug("In ohci_xls_probe");
+	if (usb_disabled())
+		return -ENODEV;
+	ret = ohci_xls_probe_internal(&ohci_xls_hc_driver, dev);
+	return ret;
+}
+
+static int ohci_xls_remove(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+static struct platform_driver ohci_xls_driver = {
+	.probe		= ohci_xls_probe,
+	.remove		= ohci_xls_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name	= "ohci-xls-0",
+		.owner	= THIS_MODULE,
+	},
+};
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 40a0d8b..e84ca19 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -959,7 +959,7 @@ static void init_pipe_info(struct r8a66597 *r8a66597, struct urb *urb,
 	info.pipenum = get_empty_pipenum(r8a66597, ep);
 	info.address = get_urb_to_r8a66597_addr(r8a66597, urb);
 	info.epnum = usb_endpoint_num(ep);
-	info.maxpacket = le16_to_cpu(ep->wMaxPacketSize);
+	info.maxpacket = usb_endpoint_maxp(ep);
 	info.type = get_r8a66597_type(usb_endpoint_type(ep));
 	info.bufnum = get_bufnum(info.pipenum);
 	info.buf_bsize = get_buf_bsize(info.pipenum);
@@ -2519,7 +2519,7 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
 	hcd->rsrc_start = res->start;
 	hcd->has_tt = 1;
 
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | irq_trigger);
+	ret = usb_add_hcd(hcd, irq, irq_trigger);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to add hcd\n");
 		goto clean_up3;
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 1a99624..961d663 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1729,7 +1729,7 @@ sl811h_probe(struct platform_device *dev)
 	 * Use resource IRQ flags if set by platform device setup.
 	 */
 	irqflags |= IRQF_SHARED;
-	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | irqflags);
+	retval = usb_add_hcd(hcd, irq, irqflags);
 	if (retval != 0)
 		goto err6;
 
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index fba99b1..c8ae199 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -294,50 +294,50 @@ __acquires(uhci->lock)
 	 * and that remote wakeups should be enabled.
 	 */
 	egsm_enable = USBCMD_EGSM;
-	uhci->RD_enable = 1;
 	int_enable = USBINTR_RESUME;
 	wakeup_enable = 1;
 
-	/* In auto-stop mode wakeups must always be detected, but
-	 * Resume-Detect interrupts may be prohibited.  (In the absence
-	 * of CONFIG_PM, they are always disallowed.)
+	/*
+	 * In auto-stop mode, we must be able to detect new connections.
+	 * The user can force us to poll by disabling remote wakeup;
+	 * otherwise we will use the EGSM/RD mechanism.
 	 */
 	if (auto_stop) {
 		if (!device_may_wakeup(&rhdev->dev))
-			int_enable = 0;
+			egsm_enable = int_enable = 0;
+	}
 
-	/* In bus-suspend mode wakeups may be disabled, but if they are
-	 * allowed then so are Resume-Detect interrupts.
-	 */
-	} else {
 #ifdef CONFIG_PM
+	/*
+	 * In bus-suspend mode, we use the wakeup setting specified
+	 * for the root hub.
+	 */
+	else {
 		if (!rhdev->do_remote_wakeup)
 			wakeup_enable = 0;
-#endif
 	}
+#endif
 
-	/* EGSM causes the root hub to echo a 'K' signal (resume) out any
-	 * port which requests a remote wakeup.  According to the USB spec,
-	 * every hub is supposed to do this.  But if we are ignoring
-	 * remote-wakeup requests anyway then there's no point to it.
-	 * We also shouldn't enable EGSM if it's broken.
-	 */
-	if (!wakeup_enable || global_suspend_mode_is_broken(uhci))
-		egsm_enable = 0;
-
-	/* If we're ignoring wakeup events then there's no reason to
-	 * enable Resume-Detect interrupts.  We also shouldn't enable
-	 * them if they are broken or disallowed.
+	/*
+	 * UHCI doesn't distinguish between wakeup requests from downstream
+	 * devices and local connect/disconnect events.  There's no way to
+	 * enable one without the other; both are controlled by EGSM.  Thus
+	 * if wakeups are disallowed then EGSM must be turned off -- in which
+	 * case remote wakeup requests from downstream during system sleep
+	 * will be lost.
+	 *
+	 * In addition, if EGSM is broken then we can't use it.  Likewise,
+	 * if Resume-Detect interrupts are broken then we can't use them.
 	 *
-	 * This logic may lead us to enabling RD but not EGSM.  The UHCI
-	 * spec foolishly says that RD works only when EGSM is on, but
-	 * there's no harm in enabling it anyway -- perhaps some chips
-	 * will implement it!
+	 * Finally, neither EGSM nor RD is useful by itself.  Without EGSM,
+	 * the RD status bit will never get set.  Without RD, the controller
+	 * won't generate interrupts to tell the system about wakeup events.
 	 */
-	if (!wakeup_enable || resume_detect_interrupts_are_broken(uhci) ||
-			!int_enable)
-		uhci->RD_enable = int_enable = 0;
+	if (!wakeup_enable || global_suspend_mode_is_broken(uhci) ||
+			resume_detect_interrupts_are_broken(uhci))
+		egsm_enable = int_enable = 0;
 
+	uhci->RD_enable = !!int_enable;
 	uhci_writew(uhci, int_enable, USBINTR);
 	uhci_writew(uhci, egsm_enable | USBCMD_CF, USBCMD);
 	mb();
@@ -364,10 +364,12 @@ __acquires(uhci->lock)
 	uhci->rh_state = new_state;
 	uhci->is_stopped = UHCI_IS_STOPPED;
 
-	/* If interrupts don't work and remote wakeup is enabled then
-	 * the suspended root hub needs to be polled.
+	/*
+	 * If remote wakeup is enabled but either EGSM or RD interrupts
+	 * doesn't work, then we won't get an interrupt when a wakeup event
+	 * occurs.  Thus the suspended root hub needs to be polled.
 	 */
-	if (!int_enable && wakeup_enable)
+	if (wakeup_enable && (!int_enable || !egsm_enable))
 		set_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
 	else
 		clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 84ed28b..f6ca80e 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -280,7 +280,7 @@ static struct uhci_qh *uhci_alloc_qh(struct uhci_hcd *uhci,
 			qh->load = usb_calc_bus_time(udev->speed,
 					usb_endpoint_dir_in(&hep->desc),
 					qh->type == USB_ENDPOINT_XFER_ISOC,
-					le16_to_cpu(hep->desc.wMaxPacketSize))
+					usb_endpoint_maxp(&hep->desc))
 				/ 1000 + 1;
 
 	} else {		/* Skeleton QH */
@@ -792,7 +792,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
 {
 	struct uhci_td *td;
 	unsigned long destination, status;
-	int maxsze = le16_to_cpu(qh->hep->desc.wMaxPacketSize);
+	int maxsze = usb_endpoint_maxp(&qh->hep->desc);
 	int len = urb->transfer_buffer_length;
 	dma_addr_t data = urb->transfer_dma;
 	__hc32 *plink;
@@ -918,7 +918,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb,
 {
 	struct uhci_td *td;
 	unsigned long destination, status;
-	int maxsze = le16_to_cpu(qh->hep->desc.wMaxPacketSize);
+	int maxsze = usb_endpoint_maxp(&qh->hep->desc);
 	int len = urb->transfer_buffer_length;
 	int this_sg_len;
 	dma_addr_t data;
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
index ce5c9e5..c7f3312 100644
--- a/drivers/usb/host/xhci-ext-caps.h
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -65,6 +65,12 @@
 /* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
 #define	XHCI_LEGACY_DISABLE_SMI		((0x3 << 1) + (0xff << 5) + (0x7 << 17))
 
+/* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */
+#define XHCI_L1C               (1 << 16)
+
+/* USB 2.0 xHCI 1.0 hardware LMP capability - section 7.2.2.1.3.2 */
+#define XHCI_HLC               (1 << 19)
+
 /* command register values to disable interrupts and halt the HC */
 /* start/stop HC execution - do not write unless HC is halted*/
 #define XHCI_CMD_RUN		(1 << 0)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 723f823..431efe7 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -28,6 +28,25 @@
 #define	PORT_RWC_BITS	(PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
 			 PORT_RC | PORT_PLC | PORT_PE)
 
+/* usb 1.1 root hub device descriptor */
+static u8 usb_bos_descriptor [] = {
+	USB_DT_BOS_SIZE,		/*  __u8 bLength, 5 bytes */
+	USB_DT_BOS,			/*  __u8 bDescriptorType */
+	0x0F, 0x00,			/*  __le16 wTotalLength, 15 bytes */
+	0x1,				/*  __u8 bNumDeviceCaps */
+	/* First device capability */
+	USB_DT_USB_SS_CAP_SIZE,		/*  __u8 bLength, 10 bytes */
+	USB_DT_DEVICE_CAPABILITY,	/* Device Capability */
+	USB_SS_CAP_TYPE,		/* bDevCapabilityType, SUPERSPEED_USB */
+	0x00,				/* bmAttributes, LTM off by default */
+	USB_5GBPS_OPERATION, 0x00,	/* wSpeedsSupported, 5Gbps only */
+	0x03,				/* bFunctionalitySupport,
+					   USB 3.0 speed only */
+	0x00,				/* bU1DevExitLat, set later. */
+	0x00, 0x00			/* __le16 bU2DevExitLat, set later. */
+};
+
+
 static void xhci_common_hub_descriptor(struct xhci_hcd *xhci,
 		struct usb_hub_descriptor *desc, int ports)
 {
@@ -232,7 +251,7 @@ int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
 			continue;
 		speed = xhci->devs[i]->udev->speed;
 		if (((speed == USB_SPEED_SUPER) == (hcd->speed == HCD_USB3))
-				&& xhci->devs[i]->port == port) {
+				&& xhci->devs[i]->fake_port == port) {
 			slot_id = i;
 			break;
 		}
@@ -392,13 +411,39 @@ static int xhci_get_ports(struct usb_hcd *hcd, __le32 __iomem ***port_array)
 	return max_ports;
 }
 
+void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
+				int port_id, u32 link_state)
+{
+	u32 temp;
+
+	temp = xhci_readl(xhci, port_array[port_id]);
+	temp = xhci_port_state_to_neutral(temp);
+	temp &= ~PORT_PLS_MASK;
+	temp |= PORT_LINK_STROBE | link_state;
+	xhci_writel(xhci, temp, port_array[port_id]);
+}
+
+/* Test and clear port RWC bit */
+void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
+				int port_id, u32 port_bit)
+{
+	u32 temp;
+
+	temp = xhci_readl(xhci, port_array[port_id]);
+	if (temp & port_bit) {
+		temp = xhci_port_state_to_neutral(temp);
+		temp |= port_bit;
+		xhci_writel(xhci, temp, port_array[port_id]);
+	}
+}
+
 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		u16 wIndex, char *buf, u16 wLength)
 {
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 	int max_ports;
 	unsigned long flags;
-	u32 temp, temp1, status;
+	u32 temp, status;
 	int retval = 0;
 	__le32 __iomem **port_array;
 	int slot_id;
@@ -429,6 +474,21 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		xhci_hub_descriptor(hcd, xhci,
 				(struct usb_hub_descriptor *) buf);
 		break;
+	case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+		if ((wValue & 0xff00) != (USB_DT_BOS << 8))
+			goto error;
+
+		if (hcd->speed != HCD_USB3)
+			goto error;
+
+		memcpy(buf, &usb_bos_descriptor,
+				USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE);
+		temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
+		buf[12] = HCS_U1_LATENCY(temp);
+		put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]);
+
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE;
 	case GetPortStatus:
 		if (!wIndex || wIndex > max_ports)
 			goto error;
@@ -472,11 +532,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				xhci_dbg(xhci, "Resume USB2 port %d\n",
 					wIndex + 1);
 				bus_state->resume_done[wIndex] = 0;
-				temp1 = xhci_port_state_to_neutral(temp);
-				temp1 &= ~PORT_PLS_MASK;
-				temp1 |= PORT_LINK_STROBE | XDEV_U0;
-				xhci_writel(xhci, temp1, port_array[wIndex]);
-
+				xhci_set_link_state(xhci, port_array, wIndex,
+							XDEV_U0);
 				xhci_dbg(xhci, "set port %d resume\n",
 					wIndex + 1);
 				slot_id = xhci_find_slot_id_by_port(hcd, xhci,
@@ -551,10 +608,19 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		switch (wValue) {
 		case USB_PORT_FEAT_SUSPEND:
 			temp = xhci_readl(xhci, port_array[wIndex]);
+			if ((temp & PORT_PLS_MASK) != XDEV_U0) {
+				/* Resume the port to U0 first */
+				xhci_set_link_state(xhci, port_array, wIndex,
+							XDEV_U0);
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				msleep(10);
+				spin_lock_irqsave(&xhci->lock, flags);
+			}
 			/* In spec software should not attempt to suspend
 			 * a port unless the port reports that it is in the
 			 * enabled (PED = ‘1’,PLS < ‘3’) state.
 			 */
+			temp = xhci_readl(xhci, port_array[wIndex]);
 			if ((temp & PORT_PE) == 0 || (temp & PORT_RESET)
 				|| (temp & PORT_PLS_MASK) >= XDEV_U3) {
 				xhci_warn(xhci, "USB core suspending device "
@@ -573,10 +639,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			xhci_stop_device(xhci, slot_id, 1);
 			spin_lock_irqsave(&xhci->lock, flags);
 
-			temp = xhci_port_state_to_neutral(temp);
-			temp &= ~PORT_PLS_MASK;
-			temp |= PORT_LINK_STROBE | XDEV_U3;
-			xhci_writel(xhci, temp, port_array[wIndex]);
+			xhci_set_link_state(xhci, port_array, wIndex, XDEV_U3);
 
 			spin_unlock_irqrestore(&xhci->lock, flags);
 			msleep(10); /* wait device to enter */
@@ -610,10 +673,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				}
 			}
 
-			temp = xhci_port_state_to_neutral(temp);
-			temp &= ~PORT_PLS_MASK;
-			temp |= PORT_LINK_STROBE | link_state;
-			xhci_writel(xhci, temp, port_array[wIndex]);
+			xhci_set_link_state(xhci, port_array, wIndex,
+						link_state);
 
 			spin_unlock_irqrestore(&xhci->lock, flags);
 			msleep(20); /* wait device to enter */
@@ -677,24 +738,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				if ((temp & PORT_PE) == 0)
 					goto error;
 
-				temp = xhci_port_state_to_neutral(temp);
-				temp &= ~PORT_PLS_MASK;
-				temp |= PORT_LINK_STROBE | XDEV_RESUME;
-				xhci_writel(xhci, temp,
-						port_array[wIndex]);
-
-				spin_unlock_irqrestore(&xhci->lock,
-						       flags);
+				xhci_set_link_state(xhci, port_array, wIndex,
+							XDEV_RESUME);
+				spin_unlock_irqrestore(&xhci->lock, flags);
 				msleep(20);
 				spin_lock_irqsave(&xhci->lock, flags);
-
-				temp = xhci_readl(xhci,
-						port_array[wIndex]);
-				temp = xhci_port_state_to_neutral(temp);
-				temp &= ~PORT_PLS_MASK;
-				temp |= PORT_LINK_STROBE | XDEV_U0;
-				xhci_writel(xhci, temp,
-						port_array[wIndex]);
+				xhci_set_link_state(xhci, port_array, wIndex,
+							XDEV_U0);
 			}
 			bus_state->port_c_suspend |= 1 << wIndex;
 
@@ -910,25 +960,18 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 		if (test_bit(port_index, &bus_state->bus_suspended) &&
 		    (temp & PORT_PLS_MASK)) {
 			if (DEV_SUPERSPEED(temp)) {
-				temp = xhci_port_state_to_neutral(temp);
-				temp &= ~PORT_PLS_MASK;
-				temp |= PORT_LINK_STROBE | XDEV_U0;
-				xhci_writel(xhci, temp, port_array[port_index]);
+				xhci_set_link_state(xhci, port_array,
+							port_index, XDEV_U0);
 			} else {
-				temp = xhci_port_state_to_neutral(temp);
-				temp &= ~PORT_PLS_MASK;
-				temp |= PORT_LINK_STROBE | XDEV_RESUME;
-				xhci_writel(xhci, temp, port_array[port_index]);
+				xhci_set_link_state(xhci, port_array,
+						port_index, XDEV_RESUME);
 
 				spin_unlock_irqrestore(&xhci->lock, flags);
 				msleep(20);
 				spin_lock_irqsave(&xhci->lock, flags);
 
-				temp = xhci_readl(xhci, port_array[port_index]);
-				temp = xhci_port_state_to_neutral(temp);
-				temp &= ~PORT_PLS_MASK;
-				temp |= PORT_LINK_STROBE | XDEV_U0;
-				xhci_writel(xhci, temp, port_array[port_index]);
+				xhci_set_link_state(xhci, port_array,
+							port_index, XDEV_U0);
 			}
 			/* wait for the port to enter U0 and report port link
 			 * state change.
@@ -938,12 +981,8 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 			spin_lock_irqsave(&xhci->lock, flags);
 
 			/* Clear PLC */
-			temp = xhci_readl(xhci, port_array[port_index]);
-			if (temp & PORT_PLC) {
-				temp = xhci_port_state_to_neutral(temp);
-				temp |= PORT_PLC;
-				xhci_writel(xhci, temp, port_array[port_index]);
-			}
+			xhci_test_and_clear_bit(xhci, port_array, port_index,
+						PORT_PLC);
 
 			slot_id = xhci_find_slot_id_by_port(hcd,
 					xhci, port_index + 1);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index d446886..42a22b8 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -61,8 +61,6 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, gfp_t flag
 
 static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
 {
-	if (!seg)
-		return;
 	if (seg->trbs) {
 		xhci_dbg(xhci, "Freeing DMA segment at %p (virtual) 0x%llx (DMA)\n",
 				seg->trbs, (unsigned long long)seg->dma);
@@ -81,7 +79,7 @@ static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
  * related flags, such as End TRB, Toggle Cycle, and no snoop.
  */
 static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev,
-		struct xhci_segment *next, bool link_trbs)
+		struct xhci_segment *next, bool link_trbs, bool isoc)
 {
 	u32 val;
 
@@ -97,7 +95,9 @@ static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev,
 		val &= ~TRB_TYPE_BITMASK;
 		val |= TRB_TYPE(TRB_LINK);
 		/* Always set the chain bit with 0.95 hardware */
-		if (xhci_link_trb_quirk(xhci))
+		/* Set chain bit for isoc rings on AMD 0.96 host */
+		if (xhci_link_trb_quirk(xhci) ||
+				(isoc && (xhci->quirks & XHCI_AMD_0x96_HOST)))
 			val |= TRB_CHAIN;
 		prev->trbs[TRBS_PER_SEGMENT-1].link.control = cpu_to_le32(val);
 	}
@@ -112,18 +112,20 @@ void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring)
 	struct xhci_segment *seg;
 	struct xhci_segment *first_seg;
 
-	if (!ring || !ring->first_seg)
+	if (!ring)
 		return;
-	first_seg = ring->first_seg;
-	seg = first_seg->next;
-	xhci_dbg(xhci, "Freeing ring at %p\n", ring);
-	while (seg != first_seg) {
-		struct xhci_segment *next = seg->next;
-		xhci_segment_free(xhci, seg);
-		seg = next;
+	if (ring->first_seg) {
+		first_seg = ring->first_seg;
+		seg = first_seg->next;
+		xhci_dbg(xhci, "Freeing ring at %p\n", ring);
+		while (seg != first_seg) {
+			struct xhci_segment *next = seg->next;
+			xhci_segment_free(xhci, seg);
+			seg = next;
+		}
+		xhci_segment_free(xhci, first_seg);
+		ring->first_seg = NULL;
 	}
-	xhci_segment_free(xhci, first_seg);
-	ring->first_seg = NULL;
 	kfree(ring);
 }
 
@@ -152,7 +154,7 @@ static void xhci_initialize_ring_info(struct xhci_ring *ring)
  * See section 4.9.1 and figures 15 and 16.
  */
 static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
-		unsigned int num_segs, bool link_trbs, gfp_t flags)
+		unsigned int num_segs, bool link_trbs, bool isoc, gfp_t flags)
 {
 	struct xhci_ring	*ring;
 	struct xhci_segment	*prev;
@@ -178,12 +180,12 @@ static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
 		next = xhci_segment_alloc(xhci, flags);
 		if (!next)
 			goto fail;
-		xhci_link_segments(xhci, prev, next, link_trbs);
+		xhci_link_segments(xhci, prev, next, link_trbs, isoc);
 
 		prev = next;
 		num_segs--;
 	}
-	xhci_link_segments(xhci, prev, ring->first_seg, link_trbs);
+	xhci_link_segments(xhci, prev, ring->first_seg, link_trbs, isoc);
 
 	if (link_trbs) {
 		/* See section 4.9.2.1 and 6.4.4.1 */
@@ -229,14 +231,14 @@ void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci,
  * pointers to the beginning of the ring.
  */
 static void xhci_reinit_cached_ring(struct xhci_hcd *xhci,
-		struct xhci_ring *ring)
+		struct xhci_ring *ring, bool isoc)
 {
 	struct xhci_segment	*seg = ring->first_seg;
 	do {
 		memset(seg->trbs, 0,
 				sizeof(union xhci_trb)*TRBS_PER_SEGMENT);
 		/* All endpoint rings have link TRBs */
-		xhci_link_segments(xhci, seg, seg->next, 1);
+		xhci_link_segments(xhci, seg, seg->next, 1, isoc);
 		seg = seg->next;
 	} while (seg != ring->first_seg);
 	xhci_initialize_ring_info(ring);
@@ -315,7 +317,7 @@ static void xhci_free_stream_ctx(struct xhci_hcd *xhci,
 	struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
 
 	if (num_stream_ctxs > MEDIUM_STREAM_ARRAY_SIZE)
-		pci_free_consistent(pdev,
+		dma_free_coherent(&pdev->dev,
 				sizeof(struct xhci_stream_ctx)*num_stream_ctxs,
 				stream_ctx, dma);
 	else if (num_stream_ctxs <= SMALL_STREAM_ARRAY_SIZE)
@@ -343,9 +345,9 @@ static struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci,
 	struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
 
 	if (num_stream_ctxs > MEDIUM_STREAM_ARRAY_SIZE)
-		return pci_alloc_consistent(pdev,
+		return dma_alloc_coherent(&pdev->dev,
 				sizeof(struct xhci_stream_ctx)*num_stream_ctxs,
-				dma);
+				dma, mem_flags);
 	else if (num_stream_ctxs <= SMALL_STREAM_ARRAY_SIZE)
 		return dma_pool_alloc(xhci->small_streams_pool,
 				mem_flags, dma);
@@ -540,7 +542,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
 	 */
 	for (cur_stream = 1; cur_stream < num_streams; cur_stream++) {
 		stream_info->stream_rings[cur_stream] =
-			xhci_ring_alloc(xhci, 1, true, mem_flags);
+			xhci_ring_alloc(xhci, 1, true, false, mem_flags);
 		cur_ring = stream_info->stream_rings[cur_stream];
 		if (!cur_ring)
 			goto cleanup_rings;
@@ -687,11 +689,103 @@ static void xhci_init_endpoint_timer(struct xhci_hcd *xhci,
 	ep->xhci = xhci;
 }
 
-/* All the xhci_tds in the ring's TD list should be freed at this point */
+static void xhci_free_tt_info(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		int slot_id)
+{
+	struct list_head *tt;
+	struct list_head *tt_list_head;
+	struct list_head *tt_next;
+	struct xhci_tt_bw_info *tt_info;
+
+	/* If the device never made it past the Set Address stage,
+	 * it may not have the real_port set correctly.
+	 */
+	if (virt_dev->real_port == 0 ||
+			virt_dev->real_port > HCS_MAX_PORTS(xhci->hcs_params1)) {
+		xhci_dbg(xhci, "Bad real port.\n");
+		return;
+	}
+
+	tt_list_head = &(xhci->rh_bw[virt_dev->real_port - 1].tts);
+	if (list_empty(tt_list_head))
+		return;
+
+	list_for_each(tt, tt_list_head) {
+		tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list);
+		if (tt_info->slot_id == slot_id)
+			break;
+	}
+	/* Cautionary measure in case the hub was disconnected before we
+	 * stored the TT information.
+	 */
+	if (tt_info->slot_id != slot_id)
+		return;
+
+	tt_next = tt->next;
+	tt_info = list_entry(tt, struct xhci_tt_bw_info,
+			tt_list);
+	/* Multi-TT hubs will have more than one entry */
+	do {
+		list_del(tt);
+		kfree(tt_info);
+		tt = tt_next;
+		if (list_empty(tt_list_head))
+			break;
+		tt_next = tt->next;
+		tt_info = list_entry(tt, struct xhci_tt_bw_info,
+				tt_list);
+	} while (tt_info->slot_id == slot_id);
+}
+
+int xhci_alloc_tt_info(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		struct usb_device *hdev,
+		struct usb_tt *tt, gfp_t mem_flags)
+{
+	struct xhci_tt_bw_info		*tt_info;
+	unsigned int			num_ports;
+	int				i, j;
+
+	if (!tt->multi)
+		num_ports = 1;
+	else
+		num_ports = hdev->maxchild;
+
+	for (i = 0; i < num_ports; i++, tt_info++) {
+		struct xhci_interval_bw_table *bw_table;
+
+		tt_info = kzalloc(sizeof(*tt_info), mem_flags);
+		if (!tt_info)
+			goto free_tts;
+		INIT_LIST_HEAD(&tt_info->tt_list);
+		list_add(&tt_info->tt_list,
+				&xhci->rh_bw[virt_dev->real_port - 1].tts);
+		tt_info->slot_id = virt_dev->udev->slot_id;
+		if (tt->multi)
+			tt_info->ttport = i+1;
+		bw_table = &tt_info->bw_table;
+		for (j = 0; j < XHCI_MAX_INTERVAL; j++)
+			INIT_LIST_HEAD(&bw_table->interval_bw[j].endpoints);
+	}
+	return 0;
+
+free_tts:
+	xhci_free_tt_info(xhci, virt_dev, virt_dev->udev->slot_id);
+	return -ENOMEM;
+}
+
+
+/* All the xhci_tds in the ring's TD list should be freed at this point.
+ * Should be called with xhci->lock held if there is any chance the TT lists
+ * will be manipulated by the configure endpoint, allocate device, or update
+ * hub functions while this function is removing the TT entries from the list.
+ */
 void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 {
 	struct xhci_virt_device *dev;
 	int i;
+	int old_active_eps = 0;
 
 	/* Slot ID 0 is reserved */
 	if (slot_id == 0 || !xhci->devs[slot_id])
@@ -702,13 +796,29 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 	if (!dev)
 		return;
 
+	if (dev->tt_info)
+		old_active_eps = dev->tt_info->active_eps;
+
 	for (i = 0; i < 31; ++i) {
 		if (dev->eps[i].ring)
 			xhci_ring_free(xhci, dev->eps[i].ring);
 		if (dev->eps[i].stream_info)
 			xhci_free_stream_info(xhci,
 					dev->eps[i].stream_info);
+		/* Endpoints on the TT/root port lists should have been removed
+		 * when usb_disable_device() was called for the device.
+		 * We can't drop them anyway, because the udev might have gone
+		 * away by this point, and we can't tell what speed it was.
+		 */
+		if (!list_empty(&dev->eps[i].bw_endpoint_list))
+			xhci_warn(xhci, "Slot %u endpoint %u "
+					"not removed from BW list!\n",
+					slot_id, i);
 	}
+	/* If this is a hub, free the TT(s) from the TT list */
+	xhci_free_tt_info(xhci, dev, slot_id);
+	/* If necessary, update the number of active TTs on this root port */
+	xhci_update_tt_active_eps(xhci, dev, old_active_eps);
 
 	if (dev->ring_cache) {
 		for (i = 0; i < dev->num_rings_cached; i++)
@@ -762,10 +872,11 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
 	for (i = 0; i < 31; i++) {
 		xhci_init_endpoint_timer(xhci, &dev->eps[i]);
 		INIT_LIST_HEAD(&dev->eps[i].cancelled_td_list);
+		INIT_LIST_HEAD(&dev->eps[i].bw_endpoint_list);
 	}
 
 	/* Allocate endpoint 0 ring */
-	dev->eps[0].ring = xhci_ring_alloc(xhci, 1, true, flags);
+	dev->eps[0].ring = xhci_ring_alloc(xhci, 1, true, false, flags);
 	if (!dev->eps[0].ring)
 		goto fail;
 
@@ -921,9 +1032,40 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
 			top_dev = top_dev->parent)
 		/* Found device below root hub */;
-	dev->port = top_dev->portnum;
+	dev->fake_port = top_dev->portnum;
+	dev->real_port = port_num;
 	xhci_dbg(xhci, "Set root hub portnum to %d\n", port_num);
-	xhci_dbg(xhci, "Set fake root hub portnum to %d\n", dev->port);
+	xhci_dbg(xhci, "Set fake root hub portnum to %d\n", dev->fake_port);
+
+	/* Find the right bandwidth table that this device will be a part of.
+	 * If this is a full speed device attached directly to a root port (or a
+	 * decendent of one), it counts as a primary bandwidth domain, not a
+	 * secondary bandwidth domain under a TT.  An xhci_tt_info structure
+	 * will never be created for the HS root hub.
+	 */
+	if (!udev->tt || !udev->tt->hub->parent) {
+		dev->bw_table = &xhci->rh_bw[port_num - 1].bw_table;
+	} else {
+		struct xhci_root_port_bw_info *rh_bw;
+		struct xhci_tt_bw_info *tt_bw;
+
+		rh_bw = &xhci->rh_bw[port_num - 1];
+		/* Find the right TT. */
+		list_for_each_entry(tt_bw, &rh_bw->tts, tt_list) {
+			if (tt_bw->slot_id != udev->tt->hub->slot_id)
+				continue;
+
+			if (!dev->udev->tt->multi ||
+					(udev->tt->multi &&
+					 tt_bw->ttport == dev->udev->ttport)) {
+				dev->bw_table = &tt_bw->bw_table;
+				dev->tt_info = tt_bw;
+				break;
+			}
+		}
+		if (!dev->tt_info)
+			xhci_warn(xhci, "WARN: Didn't find a matching TT\n");
+	}
 
 	/* Is this a LS/FS device under an external HS hub? */
 	if (udev->tt && udev->tt->hub->parent) {
@@ -1141,8 +1283,8 @@ static u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
 	if (udev->speed == USB_SPEED_SUPER)
 		return le16_to_cpu(ep->ss_ep_comp.wBytesPerInterval);
 
-	max_packet = GET_MAX_PACKET(le16_to_cpu(ep->desc.wMaxPacketSize));
-	max_burst = (le16_to_cpu(ep->desc.wMaxPacketSize) & 0x1800) >> 11;
+	max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
+	max_burst = (usb_endpoint_maxp(&ep->desc) & 0x1800) >> 11;
 	/* A 0 in max burst means 1 transfer per ESIT */
 	return max_packet * (max_burst + 1);
 }
@@ -1175,10 +1317,10 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 	 */
 	if (usb_endpoint_xfer_isoc(&ep->desc))
 		virt_dev->eps[ep_index].new_ring =
-			xhci_ring_alloc(xhci, 8, true, mem_flags);
+			xhci_ring_alloc(xhci, 8, true, true, mem_flags);
 	else
 		virt_dev->eps[ep_index].new_ring =
-			xhci_ring_alloc(xhci, 1, true, mem_flags);
+			xhci_ring_alloc(xhci, 1, true, false, mem_flags);
 	if (!virt_dev->eps[ep_index].new_ring) {
 		/* Attempt to use the ring cache */
 		if (virt_dev->num_rings_cached == 0)
@@ -1187,7 +1329,8 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 			virt_dev->ring_cache[virt_dev->num_rings_cached];
 		virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;
 		virt_dev->num_rings_cached--;
-		xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring);
+		xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring,
+			usb_endpoint_xfer_isoc(&ep->desc) ? true : false);
 	}
 	virt_dev->eps[ep_index].skip = false;
 	ep_ring = virt_dev->eps[ep_index].new_ring;
@@ -1211,7 +1354,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 	/* Set the max packet size and max burst */
 	switch (udev->speed) {
 	case USB_SPEED_SUPER:
-		max_packet = le16_to_cpu(ep->desc.wMaxPacketSize);
+		max_packet = usb_endpoint_maxp(&ep->desc);
 		ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
 		/* dig out max burst from ep companion desc */
 		max_packet = ep->ss_ep_comp.bMaxBurst;
@@ -1223,14 +1366,14 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 		 */
 		if (usb_endpoint_xfer_isoc(&ep->desc) ||
 				usb_endpoint_xfer_int(&ep->desc)) {
-			max_burst = (le16_to_cpu(ep->desc.wMaxPacketSize)
+			max_burst = (usb_endpoint_maxp(&ep->desc)
 				     & 0x1800) >> 11;
 			ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_burst));
 		}
 		/* Fall through */
 	case USB_SPEED_FULL:
 	case USB_SPEED_LOW:
-		max_packet = GET_MAX_PACKET(le16_to_cpu(ep->desc.wMaxPacketSize));
+		max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
 		ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
 		break;
 	default:
@@ -1286,6 +1429,70 @@ void xhci_endpoint_zero(struct xhci_hcd *xhci,
 	 */
 }
 
+void xhci_clear_endpoint_bw_info(struct xhci_bw_info *bw_info)
+{
+	bw_info->ep_interval = 0;
+	bw_info->mult = 0;
+	bw_info->num_packets = 0;
+	bw_info->max_packet_size = 0;
+	bw_info->type = 0;
+	bw_info->max_esit_payload = 0;
+}
+
+void xhci_update_bw_info(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *in_ctx,
+		struct xhci_input_control_ctx *ctrl_ctx,
+		struct xhci_virt_device *virt_dev)
+{
+	struct xhci_bw_info *bw_info;
+	struct xhci_ep_ctx *ep_ctx;
+	unsigned int ep_type;
+	int i;
+
+	for (i = 1; i < 31; ++i) {
+		bw_info = &virt_dev->eps[i].bw_info;
+
+		/* We can't tell what endpoint type is being dropped, but
+		 * unconditionally clearing the bandwidth info for non-periodic
+		 * endpoints should be harmless because the info will never be
+		 * set in the first place.
+		 */
+		if (!EP_IS_ADDED(ctrl_ctx, i) && EP_IS_DROPPED(ctrl_ctx, i)) {
+			/* Dropped endpoint */
+			xhci_clear_endpoint_bw_info(bw_info);
+			continue;
+		}
+
+		if (EP_IS_ADDED(ctrl_ctx, i)) {
+			ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, i);
+			ep_type = CTX_TO_EP_TYPE(le32_to_cpu(ep_ctx->ep_info2));
+
+			/* Ignore non-periodic endpoints */
+			if (ep_type != ISOC_OUT_EP && ep_type != INT_OUT_EP &&
+					ep_type != ISOC_IN_EP &&
+					ep_type != INT_IN_EP)
+				continue;
+
+			/* Added or changed endpoint */
+			bw_info->ep_interval = CTX_TO_EP_INTERVAL(
+					le32_to_cpu(ep_ctx->ep_info));
+			/* Number of packets and mult are zero-based in the
+			 * input context, but we want one-based for the
+			 * interval table.
+			 */
+			bw_info->mult = CTX_TO_EP_MULT(
+					le32_to_cpu(ep_ctx->ep_info)) + 1;
+			bw_info->num_packets = CTX_TO_MAX_BURST(
+					le32_to_cpu(ep_ctx->ep_info2)) + 1;
+			bw_info->max_packet_size = MAX_PACKET_DECODED(
+					le32_to_cpu(ep_ctx->ep_info2));
+			bw_info->type = ep_type;
+			bw_info->max_esit_payload = CTX_TO_MAX_ESIT_PAYLOAD(
+					le32_to_cpu(ep_ctx->tx_info));
+		}
+	}
+}
+
 /* Copy output xhci_ep_ctx to the input xhci_ep_ctx copy.
  * Useful when you want to change one particular aspect of the endpoint and then
  * issue a configure endpoint command.
@@ -1344,10 +1551,9 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
 	if (!xhci->scratchpad)
 		goto fail_sp;
 
-	xhci->scratchpad->sp_array =
-		pci_alloc_consistent(to_pci_dev(dev),
+	xhci->scratchpad->sp_array = dma_alloc_coherent(dev,
 				     num_sp * sizeof(u64),
-				     &xhci->scratchpad->sp_dma);
+				     &xhci->scratchpad->sp_dma, flags);
 	if (!xhci->scratchpad->sp_array)
 		goto fail_sp2;
 
@@ -1364,8 +1570,8 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
 	xhci->dcbaa->dev_context_ptrs[0] = cpu_to_le64(xhci->scratchpad->sp_dma);
 	for (i = 0; i < num_sp; i++) {
 		dma_addr_t dma;
-		void *buf = pci_alloc_consistent(to_pci_dev(dev),
-						 xhci->page_size, &dma);
+		void *buf = dma_alloc_coherent(dev, xhci->page_size, &dma,
+				flags);
 		if (!buf)
 			goto fail_sp5;
 
@@ -1378,7 +1584,7 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
 
  fail_sp5:
 	for (i = i - 1; i >= 0; i--) {
-		pci_free_consistent(to_pci_dev(dev), xhci->page_size,
+		dma_free_coherent(dev, xhci->page_size,
 				    xhci->scratchpad->sp_buffers[i],
 				    xhci->scratchpad->sp_dma_buffers[i]);
 	}
@@ -1388,7 +1594,7 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
 	kfree(xhci->scratchpad->sp_buffers);
 
  fail_sp3:
-	pci_free_consistent(to_pci_dev(dev), num_sp * sizeof(u64),
+	dma_free_coherent(dev, num_sp * sizeof(u64),
 			    xhci->scratchpad->sp_array,
 			    xhci->scratchpad->sp_dma);
 
@@ -1412,13 +1618,13 @@ static void scratchpad_free(struct xhci_hcd *xhci)
 	num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
 
 	for (i = 0; i < num_sp; i++) {
-		pci_free_consistent(pdev, xhci->page_size,
+		dma_free_coherent(&pdev->dev, xhci->page_size,
 				    xhci->scratchpad->sp_buffers[i],
 				    xhci->scratchpad->sp_dma_buffers[i]);
 	}
 	kfree(xhci->scratchpad->sp_dma_buffers);
 	kfree(xhci->scratchpad->sp_buffers);
-	pci_free_consistent(pdev, num_sp * sizeof(u64),
+	dma_free_coherent(&pdev->dev, num_sp * sizeof(u64),
 			    xhci->scratchpad->sp_array,
 			    xhci->scratchpad->sp_dma);
 	kfree(xhci->scratchpad);
@@ -1463,18 +1669,10 @@ struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
 
 void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv)
 {
-	int last;
-
-	if (!urb_priv)
-		return;
-
-	last = urb_priv->length - 1;
-	if (last >= 0) {
-		int	i;
-		for (i = 0; i <= last; i++)
-			kfree(urb_priv->td[i]);
+	if (urb_priv) {
+		kfree(urb_priv->td[0]);
+		kfree(urb_priv);
 	}
-	kfree(urb_priv);
 }
 
 void xhci_free_command(struct xhci_hcd *xhci,
@@ -1489,6 +1687,8 @@ void xhci_free_command(struct xhci_hcd *xhci,
 void xhci_mem_cleanup(struct xhci_hcd *xhci)
 {
 	struct pci_dev	*pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+	struct dev_info	*dev_info, *next;
+	unsigned long	flags;
 	int size;
 	int i;
 
@@ -1500,7 +1700,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	}
 	size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
 	if (xhci->erst.entries)
-		pci_free_consistent(pdev, size,
+		dma_free_coherent(&pdev->dev, size,
 				xhci->erst.entries, xhci->erst.erst_dma_addr);
 	xhci->erst.entries = NULL;
 	xhci_dbg(xhci, "Freed ERST\n");
@@ -1540,17 +1740,25 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 
 	xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr);
 	if (xhci->dcbaa)
-		pci_free_consistent(pdev, sizeof(*xhci->dcbaa),
+		dma_free_coherent(&pdev->dev, sizeof(*xhci->dcbaa),
 				xhci->dcbaa, xhci->dcbaa->dma);
 	xhci->dcbaa = NULL;
 
 	scratchpad_free(xhci);
 
+	spin_lock_irqsave(&xhci->lock, flags);
+	list_for_each_entry_safe(dev_info, next, &xhci->lpm_failed_devs, list) {
+		list_del(&dev_info->list);
+		kfree(dev_info);
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
 	xhci->num_usb2_ports = 0;
 	xhci->num_usb3_ports = 0;
 	kfree(xhci->usb2_ports);
 	kfree(xhci->usb3_ports);
 	kfree(xhci->port_array);
+	kfree(xhci->rh_bw);
 
 	xhci->page_size = 0;
 	xhci->page_shift = 0;
@@ -1762,6 +1970,23 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
 	if (port_offset == 0 || (port_offset + port_count - 1) > num_ports)
 		/* WTF? "Valid values are ‘1’ to MaxPorts" */
 		return;
+
+	/* Check the host's USB2 LPM capability */
+	if ((xhci->hci_version == 0x96) && (major_revision != 0x03) &&
+			(temp & XHCI_L1C)) {
+		xhci_dbg(xhci, "xHCI 0.96: support USB2 software lpm\n");
+		xhci->sw_lpm_support = 1;
+	}
+
+	if ((xhci->hci_version >= 0x100) && (major_revision != 0x03)) {
+		xhci_dbg(xhci, "xHCI 1.0: support USB2 software lpm\n");
+		xhci->sw_lpm_support = 1;
+		if (temp & XHCI_HLC) {
+			xhci_dbg(xhci, "xHCI 1.0: support USB2 hardware lpm\n");
+			xhci->hw_lpm_support = 1;
+		}
+	}
+
 	port_offset--;
 	for (i = port_offset; i < (port_offset + port_count); i++) {
 		/* Duplicate entry.  Ignore the port if the revisions differ. */
@@ -1806,7 +2031,7 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
 	__le32 __iomem *addr;
 	u32 offset;
 	unsigned int num_ports;
-	int i, port_index;
+	int i, j, port_index;
 
 	addr = &xhci->cap_regs->hcc_params;
 	offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr));
@@ -1821,6 +2046,18 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
 	if (!xhci->port_array)
 		return -ENOMEM;
 
+	xhci->rh_bw = kzalloc(sizeof(*xhci->rh_bw)*num_ports, flags);
+	if (!xhci->rh_bw)
+		return -ENOMEM;
+	for (i = 0; i < num_ports; i++) {
+		struct xhci_interval_bw_table *bw_table;
+
+		INIT_LIST_HEAD(&xhci->rh_bw[i].tts);
+		bw_table = &xhci->rh_bw[i].bw_table;
+		for (j = 0; j < XHCI_MAX_INTERVAL; j++)
+			INIT_LIST_HEAD(&bw_table->interval_bw[j].endpoints);
+	}
+
 	/*
 	 * For whatever reason, the first capability offset is from the
 	 * capability register base, not from the HCCPARAMS register.
@@ -1959,8 +2196,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	 * Section 5.4.8 - doorbell array must be
 	 * "physically contiguous and 64-byte (cache line) aligned".
 	 */
-	xhci->dcbaa = pci_alloc_consistent(to_pci_dev(dev),
-			sizeof(*xhci->dcbaa), &dma);
+	xhci->dcbaa = dma_alloc_coherent(dev, sizeof(*xhci->dcbaa), &dma,
+			GFP_KERNEL);
 	if (!xhci->dcbaa)
 		goto fail;
 	memset(xhci->dcbaa, 0, sizeof *(xhci->dcbaa));
@@ -1994,14 +2231,14 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 		dma_pool_create("xHCI 1KB stream ctx arrays",
 			dev, MEDIUM_STREAM_ARRAY_SIZE, 16, 0);
 	/* Any stream context array bigger than MEDIUM_STREAM_ARRAY_SIZE
-	 * will be allocated with pci_alloc_consistent()
+	 * will be allocated with dma_alloc_coherent()
 	 */
 
 	if (!xhci->small_streams_pool || !xhci->medium_streams_pool)
 		goto fail;
 
 	/* Set up the command ring to have one segments for now. */
-	xhci->cmd_ring = xhci_ring_alloc(xhci, 1, true, flags);
+	xhci->cmd_ring = xhci_ring_alloc(xhci, 1, true, false, flags);
 	if (!xhci->cmd_ring)
 		goto fail;
 	xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring);
@@ -2032,14 +2269,16 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	 * the event ring segment table (ERST).  Section 4.9.3.
 	 */
 	xhci_dbg(xhci, "// Allocating event ring\n");
-	xhci->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, false, flags);
+	xhci->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, false, false,
+						flags);
 	if (!xhci->event_ring)
 		goto fail;
 	if (xhci_check_trb_in_td_math(xhci, flags) < 0)
 		goto fail;
 
-	xhci->erst.entries = pci_alloc_consistent(to_pci_dev(dev),
-			sizeof(struct xhci_erst_entry)*ERST_NUM_SEGS, &dma);
+	xhci->erst.entries = dma_alloc_coherent(dev,
+			sizeof(struct xhci_erst_entry) * ERST_NUM_SEGS, &dma,
+			GFP_KERNEL);
 	if (!xhci->erst.entries)
 		goto fail;
 	xhci_dbg(xhci, "// Allocated event ring segment table at 0x%llx\n",
@@ -2102,6 +2341,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	if (xhci_setup_port_arrays(xhci, flags))
 		goto fail;
 
+	INIT_LIST_HEAD(&xhci->lpm_failed_devs);
+
 	return 0;
 
 fail:
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index cb16de2..9f51f88 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -51,61 +51,9 @@ static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
 	return 0;
 }
 
-/* called during probe() after chip reset completes */
-static int xhci_pci_setup(struct usb_hcd *hcd)
+static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 {
-	struct xhci_hcd		*xhci;
-	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
-	int			retval;
-	u32			temp;
-
-	hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2;
-
-	if (usb_hcd_is_primary_hcd(hcd)) {
-		xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
-		if (!xhci)
-			return -ENOMEM;
-		*((struct xhci_hcd **) hcd->hcd_priv) = xhci;
-		xhci->main_hcd = hcd;
-		/* Mark the first roothub as being USB 2.0.
-		 * The xHCI driver will register the USB 3.0 roothub.
-		 */
-		hcd->speed = HCD_USB2;
-		hcd->self.root_hub->speed = USB_SPEED_HIGH;
-		/*
-		 * USB 2.0 roothub under xHCI has an integrated TT,
-		 * (rate matching hub) as opposed to having an OHCI/UHCI
-		 * companion controller.
-		 */
-		hcd->has_tt = 1;
-	} else {
-		/* xHCI private pointer was set in xhci_pci_probe for the second
-		 * registered roothub.
-		 */
-		xhci = hcd_to_xhci(hcd);
-		temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
-		if (HCC_64BIT_ADDR(temp)) {
-			xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
-			dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
-		} else {
-			dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
-		}
-		return 0;
-	}
-
-	xhci->cap_regs = hcd->regs;
-	xhci->op_regs = hcd->regs +
-		HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase));
-	xhci->run_regs = hcd->regs +
-		(xhci_readl(xhci, &xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
-	/* Cache read-only capability registers */
-	xhci->hcs_params1 = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
-	xhci->hcs_params2 = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
-	xhci->hcs_params3 = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
-	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
-	xhci->hci_version = HC_VERSION(xhci->hcc_params);
-	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
-	xhci_print_registers(xhci);
+	struct pci_dev		*pdev = to_pci_dev(dev);
 
 	/* Look for vendor-specific quirks */
 	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
@@ -128,6 +76,9 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 	if (pdev->vendor == PCI_VENDOR_ID_NEC)
 		xhci->quirks |= XHCI_NEC_HOST;
 
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96)
+		xhci->quirks |= XHCI_AMD_0x96_HOST;
+
 	/* AMD PLL quirk */
 	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
 		xhci->quirks |= XHCI_AMD_PLL_FIX;
@@ -136,39 +87,29 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 		xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
 		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
 		xhci->limit_active_eps = 64;
+		xhci->quirks |= XHCI_SW_BW_CHECKING;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
 		xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
 	}
+}
 
-	/* Make sure the HC is halted. */
-	retval = xhci_halt(xhci);
-	if (retval)
-		goto error;
+/* called during probe() after chip reset completes */
+static int xhci_pci_setup(struct usb_hcd *hcd)
+{
+	struct xhci_hcd		*xhci;
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+	int			retval;
 
-	xhci_dbg(xhci, "Resetting HCD\n");
-	/* Reset the internal HC memory state and registers. */
-	retval = xhci_reset(xhci);
+	retval = xhci_gen_setup(hcd, xhci_pci_quirks);
 	if (retval)
-		goto error;
-	xhci_dbg(xhci, "Reset complete\n");
-
-	temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
-	if (HCC_64BIT_ADDR(temp)) {
-		xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
-		dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
-	} else {
-		dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
-	}
+		return retval;
 
-	xhci_dbg(xhci, "Calling HCD init\n");
-	/* Initialize HCD and host controller data structures. */
-	retval = xhci_init(hcd);
-	if (retval)
-		goto error;
-	xhci_dbg(xhci, "Called HCD init\n");
+	xhci = hcd_to_xhci(hcd);
+	if (!usb_hcd_is_primary_hcd(hcd))
+		return 0;
 
 	pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
 	xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);
@@ -178,7 +119,6 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 	if (!retval)
 		return retval;
 
-error:
 	kfree(xhci);
 	return retval;
 }
@@ -222,7 +162,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	*((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci;
 
 	retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
-			IRQF_DISABLED | IRQF_SHARED);
+			IRQF_SHARED);
 	if (retval)
 		goto put_usb3_hcd;
 	/* Roothub already marked as USB 3.0 speed */
@@ -344,6 +284,11 @@ static const struct hc_driver xhci_pci_hc_driver = {
 	.hub_status_data =	xhci_hub_status_data,
 	.bus_suspend =		xhci_bus_suspend,
 	.bus_resume =		xhci_bus_resume,
+	/*
+	 * call back when device connected and addressed
+	 */
+	.update_device =        xhci_update_device,
+	.set_usb2_hw_lpm =	xhci_set_usb2_hardware_lpm,
 };
 
 /*-------------------------------------------------------------------------*/
@@ -375,12 +320,12 @@ static struct pci_driver xhci_pci_driver = {
 #endif
 };
 
-int xhci_register_pci(void)
+int __init xhci_register_pci(void)
 {
 	return pci_register_driver(&xhci_pci_driver);
 }
 
-void xhci_unregister_pci(void)
+void __exit xhci_unregister_pci(void)
 {
 	pci_unregister_driver(&xhci_pci_driver);
 }
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 952e2de..940321b 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -185,7 +185,7 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
  *			prepare_transfer()?
  */
 static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
-		bool consumer, bool more_trbs_coming)
+		bool consumer, bool more_trbs_coming, bool isoc)
 {
 	u32 chain;
 	union xhci_trb *next;
@@ -212,11 +212,13 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
 				if (!chain && !more_trbs_coming)
 					break;
 
-				/* If we're not dealing with 0.95 hardware,
+				/* If we're not dealing with 0.95 hardware or
+				 * isoc rings on AMD 0.96 host,
 				 * carry over the chain bit of the previous TRB
 				 * (which may mean the chain bit is cleared).
 				 */
-				if (!xhci_link_trb_quirk(xhci)) {
+				if (!(isoc && (xhci->quirks & XHCI_AMD_0x96_HOST))
+						&& !xhci_link_trb_quirk(xhci)) {
 					next->link.control &=
 						cpu_to_le32(~TRB_CHAIN);
 					next->link.control |=
@@ -1329,10 +1331,8 @@ static void handle_port_status(struct xhci_hcd *xhci,
 
 		if (DEV_SUPERSPEED(temp)) {
 			xhci_dbg(xhci, "resume SS port %d\n", port_id);
-			temp = xhci_port_state_to_neutral(temp);
-			temp &= ~PORT_PLS_MASK;
-			temp |= PORT_LINK_STROBE | XDEV_U0;
-			xhci_writel(xhci, temp, port_array[faked_port_index]);
+			xhci_set_link_state(xhci, port_array, faked_port_index,
+						XDEV_U0);
 			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
 					faked_port_index);
 			if (!slot_id) {
@@ -1342,10 +1342,8 @@ static void handle_port_status(struct xhci_hcd *xhci,
 			xhci_ring_device(xhci, slot_id);
 			xhci_dbg(xhci, "resume SS port %d finished\n", port_id);
 			/* Clear PORT_PLC */
-			temp = xhci_readl(xhci, port_array[faked_port_index]);
-			temp = xhci_port_state_to_neutral(temp);
-			temp |= PORT_PLC;
-			xhci_writel(xhci, temp, port_array[faked_port_index]);
+			xhci_test_and_clear_bit(xhci, port_array,
+						faked_port_index, PORT_PLC);
 		} else {
 			xhci_dbg(xhci, "resume HS port %d\n", port_id);
 			bus_state->resume_done[faked_port_index] = jiffies +
@@ -1356,6 +1354,10 @@ static void handle_port_status(struct xhci_hcd *xhci,
 		}
 	}
 
+	if (hcd->speed != HCD_USB3)
+		xhci_test_and_clear_bit(xhci, port_array, faked_port_index,
+					PORT_PLC);
+
 cleanup:
 	/* Update event ring dequeue pointer before dropping the lock */
 	inc_deq(xhci, xhci->event_ring, true);
@@ -2192,7 +2194,8 @@ cleanup:
 			if ((urb->actual_length != urb->transfer_buffer_length &&
 						(urb->transfer_flags &
 						 URB_SHORT_NOT_OK)) ||
-					status != 0)
+					(status != 0 &&
+					 !usb_endpoint_xfer_isoc(&urb->ep->desc)))
 				xhci_dbg(xhci, "Giveback URB %p, len = %d, "
 						"expected = %x, status = %d\n",
 						urb, urb->actual_length,
@@ -2409,7 +2412,7 @@ irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd)
  *			prepare_transfer()?
  */
 static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
-		bool consumer, bool more_trbs_coming,
+		bool consumer, bool more_trbs_coming, bool isoc,
 		u32 field1, u32 field2, u32 field3, u32 field4)
 {
 	struct xhci_generic_trb *trb;
@@ -2419,7 +2422,7 @@ static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
 	trb->field[1] = cpu_to_le32(field2);
 	trb->field[2] = cpu_to_le32(field3);
 	trb->field[3] = cpu_to_le32(field4);
-	inc_enq(xhci, ring, consumer, more_trbs_coming);
+	inc_enq(xhci, ring, consumer, more_trbs_coming, isoc);
 }
 
 /*
@@ -2427,7 +2430,7 @@ static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
  * FIXME allocate segments if the ring is full.
  */
 static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
-		u32 ep_state, unsigned int num_trbs, gfp_t mem_flags)
+		u32 ep_state, unsigned int num_trbs, bool isoc, gfp_t mem_flags)
 {
 	/* Make sure the endpoint has been added to xHC schedule */
 	switch (ep_state) {
@@ -2469,10 +2472,11 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
 		next = ring->enqueue;
 
 		while (last_trb(xhci, ring, ring->enq_seg, next)) {
-			/* If we're not dealing with 0.95 hardware,
-			 * clear the chain bit.
+			/* If we're not dealing with 0.95 hardware or isoc rings
+			 * on AMD 0.96 host, clear the chain bit.
 			 */
-			if (!xhci_link_trb_quirk(xhci))
+			if (!xhci_link_trb_quirk(xhci) && !(isoc &&
+					(xhci->quirks & XHCI_AMD_0x96_HOST)))
 				next->link.control &= cpu_to_le32(~TRB_CHAIN);
 			else
 				next->link.control |= cpu_to_le32(TRB_CHAIN);
@@ -2505,6 +2509,7 @@ static int prepare_transfer(struct xhci_hcd *xhci,
 		unsigned int num_trbs,
 		struct urb *urb,
 		unsigned int td_index,
+		bool isoc,
 		gfp_t mem_flags)
 {
 	int ret;
@@ -2522,7 +2527,7 @@ static int prepare_transfer(struct xhci_hcd *xhci,
 
 	ret = prepare_ring(xhci, ep_ring,
 			   le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK,
-			   num_trbs, mem_flags);
+			   num_trbs, isoc, mem_flags);
 	if (ret)
 		return ret;
 
@@ -2711,7 +2716,7 @@ static u32 xhci_v1_0_td_remainder(int running_total, int trb_buff_len,
 	 * running_total.
 	 */
 	packets_transferred = (running_total + trb_buff_len) /
-		le16_to_cpu(urb->ep->desc.wMaxPacketSize);
+		usb_endpoint_maxp(&urb->ep->desc);
 
 	return xhci_td_remainder(total_packet_count - packets_transferred);
 }
@@ -2741,11 +2746,11 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	num_trbs = count_sg_trbs_needed(xhci, urb);
 	num_sgs = urb->num_sgs;
 	total_packet_count = roundup(urb->transfer_buffer_length,
-			le16_to_cpu(urb->ep->desc.wMaxPacketSize));
+			usb_endpoint_maxp(&urb->ep->desc));
 
 	trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id],
 			ep_index, urb->stream_id,
-			num_trbs, urb, 0, mem_flags);
+			num_trbs, urb, 0, false, mem_flags);
 	if (trb_buff_len < 0)
 		return trb_buff_len;
 
@@ -2840,7 +2845,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 			more_trbs_coming = true;
 		else
 			more_trbs_coming = false;
-		queue_trb(xhci, ep_ring, false, more_trbs_coming,
+		queue_trb(xhci, ep_ring, false, more_trbs_coming, false,
 				lower_32_bits(addr),
 				upper_32_bits(addr),
 				length_field,
@@ -2931,7 +2936,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 
 	ret = prepare_transfer(xhci, xhci->devs[slot_id],
 			ep_index, urb->stream_id,
-			num_trbs, urb, 0, mem_flags);
+			num_trbs, urb, 0, false, mem_flags);
 	if (ret < 0)
 		return ret;
 
@@ -2948,7 +2953,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 
 	running_total = 0;
 	total_packet_count = roundup(urb->transfer_buffer_length,
-			le16_to_cpu(urb->ep->desc.wMaxPacketSize));
+			usb_endpoint_maxp(&urb->ep->desc));
 	/* How much data is in the first TRB? */
 	addr = (u64) urb->transfer_dma;
 	trb_buff_len = TRB_MAX_BUFF_SIZE -
@@ -3003,7 +3008,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 			more_trbs_coming = true;
 		else
 			more_trbs_coming = false;
-		queue_trb(xhci, ep_ring, false, more_trbs_coming,
+		queue_trb(xhci, ep_ring, false, more_trbs_coming, false,
 				lower_32_bits(addr),
 				upper_32_bits(addr),
 				length_field,
@@ -3063,7 +3068,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		num_trbs++;
 	ret = prepare_transfer(xhci, xhci->devs[slot_id],
 			ep_index, urb->stream_id,
-			num_trbs, urb, 0, mem_flags);
+			num_trbs, urb, 0, false, mem_flags);
 	if (ret < 0)
 		return ret;
 
@@ -3096,7 +3101,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		}
 	}
 
-	queue_trb(xhci, ep_ring, false, true,
+	queue_trb(xhci, ep_ring, false, true, false,
 		  setup->bRequestType | setup->bRequest << 8 | le16_to_cpu(setup->wValue) << 16,
 		  le16_to_cpu(setup->wIndex) | le16_to_cpu(setup->wLength) << 16,
 		  TRB_LEN(8) | TRB_INTR_TARGET(0),
@@ -3116,7 +3121,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	if (urb->transfer_buffer_length > 0) {
 		if (setup->bRequestType & USB_DIR_IN)
 			field |= TRB_DIR_IN;
-		queue_trb(xhci, ep_ring, false, true,
+		queue_trb(xhci, ep_ring, false, true, false,
 				lower_32_bits(urb->transfer_dma),
 				upper_32_bits(urb->transfer_dma),
 				length_field,
@@ -3132,7 +3137,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		field = 0;
 	else
 		field = TRB_DIR_IN;
-	queue_trb(xhci, ep_ring, false, false,
+	queue_trb(xhci, ep_ring, false, false, false,
 			0,
 			0,
 			TRB_INTR_TARGET(0),
@@ -3269,7 +3274,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		td_len = urb->iso_frame_desc[i].length;
 		td_remain_len = td_len;
 		total_packet_count = roundup(td_len,
-				le16_to_cpu(urb->ep->desc.wMaxPacketSize));
+				usb_endpoint_maxp(&urb->ep->desc));
 		/* A zero-length transfer still involves at least one packet. */
 		if (total_packet_count == 0)
 			total_packet_count++;
@@ -3281,7 +3286,8 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 		trbs_per_td = count_isoc_trbs_needed(xhci, urb, i);
 
 		ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index,
-				urb->stream_id, trbs_per_td, urb, i, mem_flags);
+				urb->stream_id, trbs_per_td, urb, i, true,
+				mem_flags);
 		if (ret < 0) {
 			if (i == 0)
 				return ret;
@@ -3351,7 +3357,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 				remainder |
 				TRB_INTR_TARGET(0);
 
-			queue_trb(xhci, ep_ring, false, more_trbs_coming,
+			queue_trb(xhci, ep_ring, false, more_trbs_coming, true,
 				lower_32_bits(addr),
 				upper_32_bits(addr),
 				length_field,
@@ -3433,7 +3439,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
 	 * Do not insert any td of the urb to the ring if the check failed.
 	 */
 	ret = prepare_ring(xhci, ep_ring, le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK,
-			   num_trbs, mem_flags);
+			   num_trbs, true, mem_flags);
 	if (ret)
 		return ret;
 
@@ -3492,7 +3498,7 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2,
 		reserved_trbs++;
 
 	ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING,
-			reserved_trbs, GFP_ATOMIC);
+			reserved_trbs, false, GFP_ATOMIC);
 	if (ret < 0) {
 		xhci_err(xhci, "ERR: No room for command on command ring\n");
 		if (command_must_succeed)
@@ -3500,8 +3506,8 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2,
 					"unfailable commands failed.\n");
 		return ret;
 	}
-	queue_trb(xhci, xhci->cmd_ring, false, false, field1, field2, field3,
-			field4 | xhci->cmd_ring->cycle_state);
+	queue_trb(xhci, xhci->cmd_ring, false, false, false, field1, field2,
+			field3,	field4 | xhci->cmd_ring->cycle_state);
 	return 0;
 }
 
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 3a0f695..1ff95a0 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -175,28 +175,19 @@ int xhci_reset(struct xhci_hcd *xhci)
 	return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000);
 }
 
-/*
- * Free IRQs
- * free all IRQs request
- */
-static void xhci_free_irq(struct xhci_hcd *xhci)
+#ifdef CONFIG_PCI
+static int xhci_free_msi(struct xhci_hcd *xhci)
 {
 	int i;
-	struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
 
-	/* return if using legacy interrupt */
-	if (xhci_to_hcd(xhci)->irq >= 0)
-		return;
-
-	if (xhci->msix_entries) {
-		for (i = 0; i < xhci->msix_count; i++)
-			if (xhci->msix_entries[i].vector)
-				free_irq(xhci->msix_entries[i].vector,
-						xhci_to_hcd(xhci));
-	} else if (pdev->irq >= 0)
-		free_irq(pdev->irq, xhci_to_hcd(xhci));
+	if (!xhci->msix_entries)
+		return -EINVAL;
 
-	return;
+	for (i = 0; i < xhci->msix_count; i++)
+		if (xhci->msix_entries[i].vector)
+			free_irq(xhci->msix_entries[i].vector,
+					xhci_to_hcd(xhci));
+	return 0;
 }
 
 /*
@@ -224,6 +215,28 @@ static int xhci_setup_msi(struct xhci_hcd *xhci)
 }
 
 /*
+ * Free IRQs
+ * free all IRQs request
+ */
+static void xhci_free_irq(struct xhci_hcd *xhci)
+{
+	struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+	int ret;
+
+	/* return if using legacy interrupt */
+	if (xhci_to_hcd(xhci)->irq >= 0)
+		return;
+
+	ret = xhci_free_msi(xhci);
+	if (!ret)
+		return;
+	if (pdev->irq >= 0)
+		free_irq(pdev->irq, xhci_to_hcd(xhci));
+
+	return;
+}
+
+/*
  * Set up MSI-X
  */
 static int xhci_setup_msix(struct xhci_hcd *xhci)
@@ -302,6 +315,72 @@ static void xhci_cleanup_msix(struct xhci_hcd *xhci)
 	return;
 }
 
+static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
+{
+	int i;
+
+	if (xhci->msix_entries) {
+		for (i = 0; i < xhci->msix_count; i++)
+			synchronize_irq(xhci->msix_entries[i].vector);
+	}
+}
+
+static int xhci_try_enable_msi(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct pci_dev  *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+	int ret;
+
+	/*
+	 * Some Fresco Logic host controllers advertise MSI, but fail to
+	 * generate interrupts.  Don't even try to enable MSI.
+	 */
+	if (xhci->quirks & XHCI_BROKEN_MSI)
+		return 0;
+
+	/* unregister the legacy interrupt */
+	if (hcd->irq)
+		free_irq(hcd->irq, hcd);
+	hcd->irq = -1;
+
+	ret = xhci_setup_msix(xhci);
+	if (ret)
+		/* fall back to msi*/
+		ret = xhci_setup_msi(xhci);
+
+	if (!ret)
+		/* hcd->irq is -1, we have MSI */
+		return 0;
+
+	/* fall back to legacy interrupt*/
+	ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
+			hcd->irq_descr, hcd);
+	if (ret) {
+		xhci_err(xhci, "request interrupt %d failed\n",
+				pdev->irq);
+		return ret;
+	}
+	hcd->irq = pdev->irq;
+	return 0;
+}
+
+#else
+
+static int xhci_try_enable_msi(struct usb_hcd *hcd)
+{
+	return 0;
+}
+
+static void xhci_cleanup_msix(struct xhci_hcd *xhci)
+{
+}
+
+static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
+{
+}
+
+#endif
+
 /*
  * Initialize memory for HCD and xHC (one-time init).
  *
@@ -316,7 +395,7 @@ int xhci_init(struct usb_hcd *hcd)
 
 	xhci_dbg(xhci, "xhci_init\n");
 	spin_lock_init(&xhci->lock);
-	if (link_quirk) {
+	if (xhci->hci_version == 0x95 && link_quirk) {
 		xhci_dbg(xhci, "QUIRK: Not clearing Link TRB chain bits.\n");
 		xhci->quirks |= XHCI_LINK_TRB_QUIRK;
 	} else {
@@ -413,9 +492,8 @@ int xhci_run(struct usb_hcd *hcd)
 {
 	u32 temp;
 	u64 temp_64;
-	u32 ret;
+	int ret;
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
-	struct pci_dev  *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
 
 	/* Start the xHCI host controller running only after the USB 2.0 roothub
 	 * is setup.
@@ -426,34 +504,10 @@ int xhci_run(struct usb_hcd *hcd)
 		return xhci_run_finished(xhci);
 
 	xhci_dbg(xhci, "xhci_run\n");
-	/* unregister the legacy interrupt */
-	if (hcd->irq)
-		free_irq(hcd->irq, hcd);
-	hcd->irq = -1;
-
-	/* Some Fresco Logic host controllers advertise MSI, but fail to
-	 * generate interrupts.  Don't even try to enable MSI.
-	 */
-	if (xhci->quirks & XHCI_BROKEN_MSI)
-		goto legacy_irq;
 
-	ret = xhci_setup_msix(xhci);
+	ret = xhci_try_enable_msi(hcd);
 	if (ret)
-		/* fall back to msi*/
-		ret = xhci_setup_msi(xhci);
-
-	if (ret) {
-legacy_irq:
-		/* fall back to legacy interrupt*/
-		ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
-					hcd->irq_descr, hcd);
-		if (ret) {
-			xhci_err(xhci, "request interrupt %d failed\n",
-					pdev->irq);
-			return ret;
-		}
-		hcd->irq = pdev->irq;
-	}
+		return ret;
 
 #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
 	init_timer(&xhci->event_ring_timer);
@@ -694,7 +748,6 @@ int xhci_suspend(struct xhci_hcd *xhci)
 	int			rc = 0;
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
 	u32			command;
-	int			i;
 
 	spin_lock_irq(&xhci->lock);
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
@@ -730,10 +783,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
 
 	/* step 5: remove core well power */
 	/* synchronize irq when using MSI-X */
-	if (xhci->msix_entries) {
-		for (i = 0; i < xhci->msix_count; i++)
-			synchronize_irq(xhci->msix_entries[i].vector);
-	}
+	xhci_msix_sync_irqs(xhci);
 
 	return rc;
 }
@@ -945,8 +995,7 @@ static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
 		return -ENODEV;
 
 	if (check_virt_dev) {
-		if (!udev->slot_id || !xhci->devs
-			|| !xhci->devs[udev->slot_id]) {
+		if (!udev->slot_id || !xhci->devs[udev->slot_id]) {
 			printk(KERN_DEBUG "xHCI %s called with unaddressed "
 						"device\n", func);
 			return -EINVAL;
@@ -987,7 +1036,7 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
 	out_ctx = xhci->devs[slot_id]->out_ctx;
 	ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
 	hw_max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2));
-	max_packet_size = le16_to_cpu(urb->dev->ep0.desc.wMaxPacketSize);
+	max_packet_size = usb_endpoint_maxp(&urb->dev->ep0.desc);
 	if (hw_max_packet_size != max_packet_size) {
 		xhci_dbg(xhci, "Max Packet Size for ep 0 changed.\n");
 		xhci_dbg(xhci, "Max packet size in usb_device = %d\n",
@@ -1035,6 +1084,7 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
 int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct xhci_td *buffer;
 	unsigned long flags;
 	int ret = 0;
 	unsigned int slot_id, ep_index;
@@ -1065,13 +1115,15 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
 	if (!urb_priv)
 		return -ENOMEM;
 
+	buffer = kzalloc(size * sizeof(struct xhci_td), mem_flags);
+	if (!buffer) {
+		kfree(urb_priv);
+		return -ENOMEM;
+	}
+
 	for (i = 0; i < size; i++) {
-		urb_priv->td[i] = kzalloc(sizeof(struct xhci_td), mem_flags);
-		if (!urb_priv->td[i]) {
-			urb_priv->length = i;
-			xhci_urb_free_priv(xhci, urb_priv);
-			return -ENOMEM;
-		}
+		urb_priv->td[i] = buffer;
+		buffer++;
 	}
 
 	urb_priv->length = size;
@@ -1747,6 +1799,564 @@ static void xhci_finish_resource_reservation(struct xhci_hcd *xhci,
 				xhci->num_active_eps);
 }
 
+unsigned int xhci_get_block_size(struct usb_device *udev)
+{
+	switch (udev->speed) {
+	case USB_SPEED_LOW:
+	case USB_SPEED_FULL:
+		return FS_BLOCK;
+	case USB_SPEED_HIGH:
+		return HS_BLOCK;
+	case USB_SPEED_SUPER:
+		return SS_BLOCK;
+	case USB_SPEED_UNKNOWN:
+	case USB_SPEED_WIRELESS:
+	default:
+		/* Should never happen */
+		return 1;
+	}
+}
+
+unsigned int xhci_get_largest_overhead(struct xhci_interval_bw *interval_bw)
+{
+	if (interval_bw->overhead[LS_OVERHEAD_TYPE])
+		return LS_OVERHEAD;
+	if (interval_bw->overhead[FS_OVERHEAD_TYPE])
+		return FS_OVERHEAD;
+	return HS_OVERHEAD;
+}
+
+/* If we are changing a LS/FS device under a HS hub,
+ * make sure (if we are activating a new TT) that the HS bus has enough
+ * bandwidth for this new TT.
+ */
+static int xhci_check_tt_bw_table(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		int old_active_eps)
+{
+	struct xhci_interval_bw_table *bw_table;
+	struct xhci_tt_bw_info *tt_info;
+
+	/* Find the bandwidth table for the root port this TT is attached to. */
+	bw_table = &xhci->rh_bw[virt_dev->real_port - 1].bw_table;
+	tt_info = virt_dev->tt_info;
+	/* If this TT already had active endpoints, the bandwidth for this TT
+	 * has already been added.  Removing all periodic endpoints (and thus
+	 * making the TT enactive) will only decrease the bandwidth used.
+	 */
+	if (old_active_eps)
+		return 0;
+	if (old_active_eps == 0 && tt_info->active_eps != 0) {
+		if (bw_table->bw_used + TT_HS_OVERHEAD > HS_BW_LIMIT)
+			return -ENOMEM;
+		return 0;
+	}
+	/* Not sure why we would have no new active endpoints...
+	 *
+	 * Maybe because of an Evaluate Context change for a hub update or a
+	 * control endpoint 0 max packet size change?
+	 * FIXME: skip the bandwidth calculation in that case.
+	 */
+	return 0;
+}
+
+static int xhci_check_ss_bw(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev)
+{
+	unsigned int bw_reserved;
+
+	bw_reserved = DIV_ROUND_UP(SS_BW_RESERVED*SS_BW_LIMIT_IN, 100);
+	if (virt_dev->bw_table->ss_bw_in > (SS_BW_LIMIT_IN - bw_reserved))
+		return -ENOMEM;
+
+	bw_reserved = DIV_ROUND_UP(SS_BW_RESERVED*SS_BW_LIMIT_OUT, 100);
+	if (virt_dev->bw_table->ss_bw_out > (SS_BW_LIMIT_OUT - bw_reserved))
+		return -ENOMEM;
+
+	return 0;
+}
+
+/*
+ * This algorithm is a very conservative estimate of the worst-case scheduling
+ * scenario for any one interval.  The hardware dynamically schedules the
+ * packets, so we can't tell which microframe could be the limiting factor in
+ * the bandwidth scheduling.  This only takes into account periodic endpoints.
+ *
+ * Obviously, we can't solve an NP complete problem to find the minimum worst
+ * case scenario.  Instead, we come up with an estimate that is no less than
+ * the worst case bandwidth used for any one microframe, but may be an
+ * over-estimate.
+ *
+ * We walk the requirements for each endpoint by interval, starting with the
+ * smallest interval, and place packets in the schedule where there is only one
+ * possible way to schedule packets for that interval.  In order to simplify
+ * this algorithm, we record the largest max packet size for each interval, and
+ * assume all packets will be that size.
+ *
+ * For interval 0, we obviously must schedule all packets for each interval.
+ * The bandwidth for interval 0 is just the amount of data to be transmitted
+ * (the sum of all max ESIT payload sizes, plus any overhead per packet times
+ * the number of packets).
+ *
+ * For interval 1, we have two possible microframes to schedule those packets
+ * in.  For this algorithm, if we can schedule the same number of packets for
+ * each possible scheduling opportunity (each microframe), we will do so.  The
+ * remaining number of packets will be saved to be transmitted in the gaps in
+ * the next interval's scheduling sequence.
+ *
+ * As we move those remaining packets to be scheduled with interval 2 packets,
+ * we have to double the number of remaining packets to transmit.  This is
+ * because the intervals are actually powers of 2, and we would be transmitting
+ * the previous interval's packets twice in this interval.  We also have to be
+ * sure that when we look at the largest max packet size for this interval, we
+ * also look at the largest max packet size for the remaining packets and take
+ * the greater of the two.
+ *
+ * The algorithm continues to evenly distribute packets in each scheduling
+ * opportunity, and push the remaining packets out, until we get to the last
+ * interval.  Then those packets and their associated overhead are just added
+ * to the bandwidth used.
+ */
+static int xhci_check_bw_table(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		int old_active_eps)
+{
+	unsigned int bw_reserved;
+	unsigned int max_bandwidth;
+	unsigned int bw_used;
+	unsigned int block_size;
+	struct xhci_interval_bw_table *bw_table;
+	unsigned int packet_size = 0;
+	unsigned int overhead = 0;
+	unsigned int packets_transmitted = 0;
+	unsigned int packets_remaining = 0;
+	unsigned int i;
+
+	if (virt_dev->udev->speed == USB_SPEED_SUPER)
+		return xhci_check_ss_bw(xhci, virt_dev);
+
+	if (virt_dev->udev->speed == USB_SPEED_HIGH) {
+		max_bandwidth = HS_BW_LIMIT;
+		/* Convert percent of bus BW reserved to blocks reserved */
+		bw_reserved = DIV_ROUND_UP(HS_BW_RESERVED * max_bandwidth, 100);
+	} else {
+		max_bandwidth = FS_BW_LIMIT;
+		bw_reserved = DIV_ROUND_UP(FS_BW_RESERVED * max_bandwidth, 100);
+	}
+
+	bw_table = virt_dev->bw_table;
+	/* We need to translate the max packet size and max ESIT payloads into
+	 * the units the hardware uses.
+	 */
+	block_size = xhci_get_block_size(virt_dev->udev);
+
+	/* If we are manipulating a LS/FS device under a HS hub, double check
+	 * that the HS bus has enough bandwidth if we are activing a new TT.
+	 */
+	if (virt_dev->tt_info) {
+		xhci_dbg(xhci, "Recalculating BW for rootport %u\n",
+				virt_dev->real_port);
+		if (xhci_check_tt_bw_table(xhci, virt_dev, old_active_eps)) {
+			xhci_warn(xhci, "Not enough bandwidth on HS bus for "
+					"newly activated TT.\n");
+			return -ENOMEM;
+		}
+		xhci_dbg(xhci, "Recalculating BW for TT slot %u port %u\n",
+				virt_dev->tt_info->slot_id,
+				virt_dev->tt_info->ttport);
+	} else {
+		xhci_dbg(xhci, "Recalculating BW for rootport %u\n",
+				virt_dev->real_port);
+	}
+
+	/* Add in how much bandwidth will be used for interval zero, or the
+	 * rounded max ESIT payload + number of packets * largest overhead.
+	 */
+	bw_used = DIV_ROUND_UP(bw_table->interval0_esit_payload, block_size) +
+		bw_table->interval_bw[0].num_packets *
+		xhci_get_largest_overhead(&bw_table->interval_bw[0]);
+
+	for (i = 1; i < XHCI_MAX_INTERVAL; i++) {
+		unsigned int bw_added;
+		unsigned int largest_mps;
+		unsigned int interval_overhead;
+
+		/*
+		 * How many packets could we transmit in this interval?
+		 * If packets didn't fit in the previous interval, we will need
+		 * to transmit that many packets twice within this interval.
+		 */
+		packets_remaining = 2 * packets_remaining +
+			bw_table->interval_bw[i].num_packets;
+
+		/* Find the largest max packet size of this or the previous
+		 * interval.
+		 */
+		if (list_empty(&bw_table->interval_bw[i].endpoints))
+			largest_mps = 0;
+		else {
+			struct xhci_virt_ep *virt_ep;
+			struct list_head *ep_entry;
+
+			ep_entry = bw_table->interval_bw[i].endpoints.next;
+			virt_ep = list_entry(ep_entry,
+					struct xhci_virt_ep, bw_endpoint_list);
+			/* Convert to blocks, rounding up */
+			largest_mps = DIV_ROUND_UP(
+					virt_ep->bw_info.max_packet_size,
+					block_size);
+		}
+		if (largest_mps > packet_size)
+			packet_size = largest_mps;
+
+		/* Use the larger overhead of this or the previous interval. */
+		interval_overhead = xhci_get_largest_overhead(
+				&bw_table->interval_bw[i]);
+		if (interval_overhead > overhead)
+			overhead = interval_overhead;
+
+		/* How many packets can we evenly distribute across
+		 * (1 << (i + 1)) possible scheduling opportunities?
+		 */
+		packets_transmitted = packets_remaining >> (i + 1);
+
+		/* Add in the bandwidth used for those scheduled packets */
+		bw_added = packets_transmitted * (overhead + packet_size);
+
+		/* How many packets do we have remaining to transmit? */
+		packets_remaining = packets_remaining % (1 << (i + 1));
+
+		/* What largest max packet size should those packets have? */
+		/* If we've transmitted all packets, don't carry over the
+		 * largest packet size.
+		 */
+		if (packets_remaining == 0) {
+			packet_size = 0;
+			overhead = 0;
+		} else if (packets_transmitted > 0) {
+			/* Otherwise if we do have remaining packets, and we've
+			 * scheduled some packets in this interval, take the
+			 * largest max packet size from endpoints with this
+			 * interval.
+			 */
+			packet_size = largest_mps;
+			overhead = interval_overhead;
+		}
+		/* Otherwise carry over packet_size and overhead from the last
+		 * time we had a remainder.
+		 */
+		bw_used += bw_added;
+		if (bw_used > max_bandwidth) {
+			xhci_warn(xhci, "Not enough bandwidth. "
+					"Proposed: %u, Max: %u\n",
+				bw_used, max_bandwidth);
+			return -ENOMEM;
+		}
+	}
+	/*
+	 * Ok, we know we have some packets left over after even-handedly
+	 * scheduling interval 15.  We don't know which microframes they will
+	 * fit into, so we over-schedule and say they will be scheduled every
+	 * microframe.
+	 */
+	if (packets_remaining > 0)
+		bw_used += overhead + packet_size;
+
+	if (!virt_dev->tt_info && virt_dev->udev->speed == USB_SPEED_HIGH) {
+		unsigned int port_index = virt_dev->real_port - 1;
+
+		/* OK, we're manipulating a HS device attached to a
+		 * root port bandwidth domain.  Include the number of active TTs
+		 * in the bandwidth used.
+		 */
+		bw_used += TT_HS_OVERHEAD *
+			xhci->rh_bw[port_index].num_active_tts;
+	}
+
+	xhci_dbg(xhci, "Final bandwidth: %u, Limit: %u, Reserved: %u, "
+		"Available: %u " "percent\n",
+		bw_used, max_bandwidth, bw_reserved,
+		(max_bandwidth - bw_used - bw_reserved) * 100 /
+		max_bandwidth);
+
+	bw_used += bw_reserved;
+	if (bw_used > max_bandwidth) {
+		xhci_warn(xhci, "Not enough bandwidth. Proposed: %u, Max: %u\n",
+				bw_used, max_bandwidth);
+		return -ENOMEM;
+	}
+
+	bw_table->bw_used = bw_used;
+	return 0;
+}
+
+static bool xhci_is_async_ep(unsigned int ep_type)
+{
+	return (ep_type != ISOC_OUT_EP && ep_type != INT_OUT_EP &&
+					ep_type != ISOC_IN_EP &&
+					ep_type != INT_IN_EP);
+}
+
+static bool xhci_is_sync_in_ep(unsigned int ep_type)
+{
+	return (ep_type == ISOC_IN_EP || ep_type != INT_IN_EP);
+}
+
+static unsigned int xhci_get_ss_bw_consumed(struct xhci_bw_info *ep_bw)
+{
+	unsigned int mps = DIV_ROUND_UP(ep_bw->max_packet_size, SS_BLOCK);
+
+	if (ep_bw->ep_interval == 0)
+		return SS_OVERHEAD_BURST +
+			(ep_bw->mult * ep_bw->num_packets *
+					(SS_OVERHEAD + mps));
+	return DIV_ROUND_UP(ep_bw->mult * ep_bw->num_packets *
+				(SS_OVERHEAD + mps + SS_OVERHEAD_BURST),
+				1 << ep_bw->ep_interval);
+
+}
+
+void xhci_drop_ep_from_interval_table(struct xhci_hcd *xhci,
+		struct xhci_bw_info *ep_bw,
+		struct xhci_interval_bw_table *bw_table,
+		struct usb_device *udev,
+		struct xhci_virt_ep *virt_ep,
+		struct xhci_tt_bw_info *tt_info)
+{
+	struct xhci_interval_bw	*interval_bw;
+	int normalized_interval;
+
+	if (xhci_is_async_ep(ep_bw->type))
+		return;
+
+	if (udev->speed == USB_SPEED_SUPER) {
+		if (xhci_is_sync_in_ep(ep_bw->type))
+			xhci->devs[udev->slot_id]->bw_table->ss_bw_in -=
+				xhci_get_ss_bw_consumed(ep_bw);
+		else
+			xhci->devs[udev->slot_id]->bw_table->ss_bw_out -=
+				xhci_get_ss_bw_consumed(ep_bw);
+		return;
+	}
+
+	/* SuperSpeed endpoints never get added to intervals in the table, so
+	 * this check is only valid for HS/FS/LS devices.
+	 */
+	if (list_empty(&virt_ep->bw_endpoint_list))
+		return;
+	/* For LS/FS devices, we need to translate the interval expressed in
+	 * microframes to frames.
+	 */
+	if (udev->speed == USB_SPEED_HIGH)
+		normalized_interval = ep_bw->ep_interval;
+	else
+		normalized_interval = ep_bw->ep_interval - 3;
+
+	if (normalized_interval == 0)
+		bw_table->interval0_esit_payload -= ep_bw->max_esit_payload;
+	interval_bw = &bw_table->interval_bw[normalized_interval];
+	interval_bw->num_packets -= ep_bw->num_packets;
+	switch (udev->speed) {
+	case USB_SPEED_LOW:
+		interval_bw->overhead[LS_OVERHEAD_TYPE] -= 1;
+		break;
+	case USB_SPEED_FULL:
+		interval_bw->overhead[FS_OVERHEAD_TYPE] -= 1;
+		break;
+	case USB_SPEED_HIGH:
+		interval_bw->overhead[HS_OVERHEAD_TYPE] -= 1;
+		break;
+	case USB_SPEED_SUPER:
+	case USB_SPEED_UNKNOWN:
+	case USB_SPEED_WIRELESS:
+		/* Should never happen because only LS/FS/HS endpoints will get
+		 * added to the endpoint list.
+		 */
+		return;
+	}
+	if (tt_info)
+		tt_info->active_eps -= 1;
+	list_del_init(&virt_ep->bw_endpoint_list);
+}
+
+static void xhci_add_ep_to_interval_table(struct xhci_hcd *xhci,
+		struct xhci_bw_info *ep_bw,
+		struct xhci_interval_bw_table *bw_table,
+		struct usb_device *udev,
+		struct xhci_virt_ep *virt_ep,
+		struct xhci_tt_bw_info *tt_info)
+{
+	struct xhci_interval_bw	*interval_bw;
+	struct xhci_virt_ep *smaller_ep;
+	int normalized_interval;
+
+	if (xhci_is_async_ep(ep_bw->type))
+		return;
+
+	if (udev->speed == USB_SPEED_SUPER) {
+		if (xhci_is_sync_in_ep(ep_bw->type))
+			xhci->devs[udev->slot_id]->bw_table->ss_bw_in +=
+				xhci_get_ss_bw_consumed(ep_bw);
+		else
+			xhci->devs[udev->slot_id]->bw_table->ss_bw_out +=
+				xhci_get_ss_bw_consumed(ep_bw);
+		return;
+	}
+
+	/* For LS/FS devices, we need to translate the interval expressed in
+	 * microframes to frames.
+	 */
+	if (udev->speed == USB_SPEED_HIGH)
+		normalized_interval = ep_bw->ep_interval;
+	else
+		normalized_interval = ep_bw->ep_interval - 3;
+
+	if (normalized_interval == 0)
+		bw_table->interval0_esit_payload += ep_bw->max_esit_payload;
+	interval_bw = &bw_table->interval_bw[normalized_interval];
+	interval_bw->num_packets += ep_bw->num_packets;
+	switch (udev->speed) {
+	case USB_SPEED_LOW:
+		interval_bw->overhead[LS_OVERHEAD_TYPE] += 1;
+		break;
+	case USB_SPEED_FULL:
+		interval_bw->overhead[FS_OVERHEAD_TYPE] += 1;
+		break;
+	case USB_SPEED_HIGH:
+		interval_bw->overhead[HS_OVERHEAD_TYPE] += 1;
+		break;
+	case USB_SPEED_SUPER:
+	case USB_SPEED_UNKNOWN:
+	case USB_SPEED_WIRELESS:
+		/* Should never happen because only LS/FS/HS endpoints will get
+		 * added to the endpoint list.
+		 */
+		return;
+	}
+
+	if (tt_info)
+		tt_info->active_eps += 1;
+	/* Insert the endpoint into the list, largest max packet size first. */
+	list_for_each_entry(smaller_ep, &interval_bw->endpoints,
+			bw_endpoint_list) {
+		if (ep_bw->max_packet_size >=
+				smaller_ep->bw_info.max_packet_size) {
+			/* Add the new ep before the smaller endpoint */
+			list_add_tail(&virt_ep->bw_endpoint_list,
+					&smaller_ep->bw_endpoint_list);
+			return;
+		}
+	}
+	/* Add the new endpoint at the end of the list. */
+	list_add_tail(&virt_ep->bw_endpoint_list,
+			&interval_bw->endpoints);
+}
+
+void xhci_update_tt_active_eps(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		int old_active_eps)
+{
+	struct xhci_root_port_bw_info *rh_bw_info;
+	if (!virt_dev->tt_info)
+		return;
+
+	rh_bw_info = &xhci->rh_bw[virt_dev->real_port - 1];
+	if (old_active_eps == 0 &&
+				virt_dev->tt_info->active_eps != 0) {
+		rh_bw_info->num_active_tts += 1;
+		rh_bw_info->bw_table.bw_used += TT_HS_OVERHEAD;
+	} else if (old_active_eps != 0 &&
+				virt_dev->tt_info->active_eps == 0) {
+		rh_bw_info->num_active_tts -= 1;
+		rh_bw_info->bw_table.bw_used -= TT_HS_OVERHEAD;
+	}
+}
+
+static int xhci_reserve_bandwidth(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		struct xhci_container_ctx *in_ctx)
+{
+	struct xhci_bw_info ep_bw_info[31];
+	int i;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	int old_active_eps = 0;
+
+	if (virt_dev->tt_info)
+		old_active_eps = virt_dev->tt_info->active_eps;
+
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+
+	for (i = 0; i < 31; i++) {
+		if (!EP_IS_ADDED(ctrl_ctx, i) && !EP_IS_DROPPED(ctrl_ctx, i))
+			continue;
+
+		/* Make a copy of the BW info in case we need to revert this */
+		memcpy(&ep_bw_info[i], &virt_dev->eps[i].bw_info,
+				sizeof(ep_bw_info[i]));
+		/* Drop the endpoint from the interval table if the endpoint is
+		 * being dropped or changed.
+		 */
+		if (EP_IS_DROPPED(ctrl_ctx, i))
+			xhci_drop_ep_from_interval_table(xhci,
+					&virt_dev->eps[i].bw_info,
+					virt_dev->bw_table,
+					virt_dev->udev,
+					&virt_dev->eps[i],
+					virt_dev->tt_info);
+	}
+	/* Overwrite the information stored in the endpoints' bw_info */
+	xhci_update_bw_info(xhci, virt_dev->in_ctx, ctrl_ctx, virt_dev);
+	for (i = 0; i < 31; i++) {
+		/* Add any changed or added endpoints to the interval table */
+		if (EP_IS_ADDED(ctrl_ctx, i))
+			xhci_add_ep_to_interval_table(xhci,
+					&virt_dev->eps[i].bw_info,
+					virt_dev->bw_table,
+					virt_dev->udev,
+					&virt_dev->eps[i],
+					virt_dev->tt_info);
+	}
+
+	if (!xhci_check_bw_table(xhci, virt_dev, old_active_eps)) {
+		/* Ok, this fits in the bandwidth we have.
+		 * Update the number of active TTs.
+		 */
+		xhci_update_tt_active_eps(xhci, virt_dev, old_active_eps);
+		return 0;
+	}
+
+	/* We don't have enough bandwidth for this, revert the stored info. */
+	for (i = 0; i < 31; i++) {
+		if (!EP_IS_ADDED(ctrl_ctx, i) && !EP_IS_DROPPED(ctrl_ctx, i))
+			continue;
+
+		/* Drop the new copies of any added or changed endpoints from
+		 * the interval table.
+		 */
+		if (EP_IS_ADDED(ctrl_ctx, i)) {
+			xhci_drop_ep_from_interval_table(xhci,
+					&virt_dev->eps[i].bw_info,
+					virt_dev->bw_table,
+					virt_dev->udev,
+					&virt_dev->eps[i],
+					virt_dev->tt_info);
+		}
+		/* Revert the endpoint back to its old information */
+		memcpy(&virt_dev->eps[i].bw_info, &ep_bw_info[i],
+				sizeof(ep_bw_info[i]));
+		/* Add any changed or dropped endpoints back into the table */
+		if (EP_IS_DROPPED(ctrl_ctx, i))
+			xhci_add_ep_to_interval_table(xhci,
+					&virt_dev->eps[i].bw_info,
+					virt_dev->bw_table,
+					virt_dev->udev,
+					&virt_dev->eps[i],
+					virt_dev->tt_info);
+	}
+	return -ENOMEM;
+}
+
+
 /* Issue a configure endpoint command or evaluate context command
  * and wait for it to finish.
  */
@@ -1765,17 +2375,30 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 
 	spin_lock_irqsave(&xhci->lock, flags);
 	virt_dev = xhci->devs[udev->slot_id];
-	if (command) {
+
+	if (command)
 		in_ctx = command->in_ctx;
-		if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) &&
-				xhci_reserve_host_resources(xhci, in_ctx)) {
-			spin_unlock_irqrestore(&xhci->lock, flags);
-			xhci_warn(xhci, "Not enough host resources, "
-					"active endpoint contexts = %u\n",
-					xhci->num_active_eps);
-			return -ENOMEM;
-		}
+	else
+		in_ctx = virt_dev->in_ctx;
+
+	if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) &&
+			xhci_reserve_host_resources(xhci, in_ctx)) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_warn(xhci, "Not enough host resources, "
+				"active endpoint contexts = %u\n",
+				xhci->num_active_eps);
+		return -ENOMEM;
+	}
+	if ((xhci->quirks & XHCI_SW_BW_CHECKING) &&
+			xhci_reserve_bandwidth(xhci, virt_dev, in_ctx)) {
+		if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK))
+			xhci_free_host_resources(xhci, in_ctx);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_warn(xhci, "Not enough bandwidth\n");
+		return -ENOMEM;
+	}
 
+	if (command) {
 		cmd_completion = command->completion;
 		cmd_status = &command->status;
 		command->command_trb = xhci->cmd_ring->enqueue;
@@ -1789,15 +2412,6 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 
 		list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
 	} else {
-		in_ctx = virt_dev->in_ctx;
-		if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) &&
-				xhci_reserve_host_resources(xhci, in_ctx)) {
-			spin_unlock_irqrestore(&xhci->lock, flags);
-			xhci_warn(xhci, "Not enough host resources, "
-					"active endpoint contexts = %u\n",
-					xhci->num_active_eps);
-			return -ENOMEM;
-		}
 		cmd_completion = &virt_dev->cmd_completion;
 		cmd_status = &virt_dev->cmd_status;
 	}
@@ -1888,6 +2502,12 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 	ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
 	ctrl_ctx->add_flags &= cpu_to_le32(~EP0_FLAG);
 	ctrl_ctx->drop_flags &= cpu_to_le32(~(SLOT_FLAG | EP0_FLAG));
+
+	/* Don't issue the command if there's no endpoints to update. */
+	if (ctrl_ctx->add_flags == cpu_to_le32(SLOT_FLAG) &&
+			ctrl_ctx->drop_flags == 0)
+		return 0;
+
 	xhci_dbg(xhci, "New Input Control Context:\n");
 	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
 	xhci_dbg_ctx(xhci, virt_dev->in_ctx,
@@ -2525,6 +3145,7 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
 	int timeleft;
 	int last_freed_endpoint;
 	struct xhci_slot_ctx *slot_ctx;
+	int old_active_eps = 0;
 
 	ret = xhci_check_args(hcd, udev, NULL, 0, false, __func__);
 	if (ret <= 0)
@@ -2666,7 +3287,18 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
 			xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
 			last_freed_endpoint = i;
 		}
-	}
+		if (!list_empty(&virt_dev->eps[i].bw_endpoint_list))
+			xhci_drop_ep_from_interval_table(xhci,
+					&virt_dev->eps[i].bw_info,
+					virt_dev->bw_table,
+					udev,
+					&virt_dev->eps[i],
+					virt_dev->tt_info);
+		xhci_clear_endpoint_bw_info(&virt_dev->eps[i].bw_info);
+	}
+	/* If necessary, update the number of active TTs on this root port */
+	xhci_update_tt_active_eps(xhci, virt_dev, old_active_eps);
+
 	xhci_dbg(xhci, "Output context after successful reset device cmd:\n");
 	xhci_dbg_ctx(xhci, virt_dev->out_ctx, last_freed_endpoint);
 	ret = 0;
@@ -2704,6 +3336,11 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
 		del_timer_sync(&virt_dev->eps[i].stop_cmd_timer);
 	}
 
+	if (udev->usb2_hw_lpm_enabled) {
+		xhci_set_usb2_hardware_lpm(hcd, udev, 0);
+		udev->usb2_hw_lpm_enabled = 0;
+	}
+
 	spin_lock_irqsave(&xhci->lock, flags);
 	/* Don't disable the slot if the host controller is dead. */
 	state = xhci_readl(xhci, &xhci->op_regs->status);
@@ -2889,7 +3526,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	 * command on a timeout.
 	 */
 	if (timeleft <= 0) {
-		xhci_warn(xhci, "%s while waiting for a slot\n",
+		xhci_warn(xhci, "%s while waiting for address device command\n",
 				timeleft == 0 ? "Timeout" : "Signal");
 		/* FIXME cancel the address device command */
 		return -ETIME;
@@ -2957,6 +3594,254 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	return 0;
 }
 
+#ifdef CONFIG_USB_SUSPEND
+
+/* BESL to HIRD Encoding array for USB2 LPM */
+static int xhci_besl_encoding[16] = {125, 150, 200, 300, 400, 500, 1000, 2000,
+	3000, 4000, 5000, 6000, 7000, 8000, 9000, 10000};
+
+/* Calculate HIRD/BESL for USB2 PORTPMSC*/
+static int xhci_calculate_hird_besl(int u2del, bool use_besl)
+{
+	int hird;
+
+	if (use_besl) {
+		for (hird = 0; hird < 16; hird++) {
+			if (xhci_besl_encoding[hird] >= u2del)
+				break;
+		}
+	} else {
+		if (u2del <= 50)
+			hird = 0;
+		else
+			hird = (u2del - 51) / 75 + 1;
+
+		if (hird > 15)
+			hird = 15;
+	}
+
+	return hird;
+}
+
+static int xhci_usb2_software_lpm_test(struct usb_hcd *hcd,
+					struct usb_device *udev)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct dev_info	*dev_info;
+	__le32 __iomem	**port_array;
+	__le32 __iomem	*addr, *pm_addr;
+	u32		temp, dev_id;
+	unsigned int	port_num;
+	unsigned long	flags;
+	int		u2del, hird;
+	int		ret;
+
+	if (hcd->speed == HCD_USB3 || !xhci->sw_lpm_support ||
+			!udev->lpm_capable)
+		return -EINVAL;
+
+	/* we only support lpm for non-hub device connected to root hub yet */
+	if (!udev->parent || udev->parent->parent ||
+			udev->descriptor.bDeviceClass == USB_CLASS_HUB)
+		return -EINVAL;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	/* Look for devices in lpm_failed_devs list */
+	dev_id = le16_to_cpu(udev->descriptor.idVendor) << 16 |
+			le16_to_cpu(udev->descriptor.idProduct);
+	list_for_each_entry(dev_info, &xhci->lpm_failed_devs, list) {
+		if (dev_info->dev_id == dev_id) {
+			ret = -EINVAL;
+			goto finish;
+		}
+	}
+
+	port_array = xhci->usb2_ports;
+	port_num = udev->portnum - 1;
+
+	if (port_num > HCS_MAX_PORTS(xhci->hcs_params1)) {
+		xhci_dbg(xhci, "invalid port number %d\n", udev->portnum);
+		ret = -EINVAL;
+		goto finish;
+	}
+
+	/*
+	 * Test USB 2.0 software LPM.
+	 * FIXME: some xHCI 1.0 hosts may implement a new register to set up
+	 * hardware-controlled USB 2.0 LPM. See section 5.4.11 and 4.23.5.1.1.1
+	 * in the June 2011 errata release.
+	 */
+	xhci_dbg(xhci, "test port %d software LPM\n", port_num);
+	/*
+	 * Set L1 Device Slot and HIRD/BESL.
+	 * Check device's USB 2.0 extension descriptor to determine whether
+	 * HIRD or BESL shoule be used. See USB2.0 LPM errata.
+	 */
+	pm_addr = port_array[port_num] + 1;
+	u2del = HCS_U2_LATENCY(xhci->hcs_params3);
+	if (le32_to_cpu(udev->bos->ext_cap->bmAttributes) & (1 << 2))
+		hird = xhci_calculate_hird_besl(u2del, 1);
+	else
+		hird = xhci_calculate_hird_besl(u2del, 0);
+
+	temp = PORT_L1DS(udev->slot_id) | PORT_HIRD(hird);
+	xhci_writel(xhci, temp, pm_addr);
+
+	/* Set port link state to U2(L1) */
+	addr = port_array[port_num];
+	xhci_set_link_state(xhci, port_array, port_num, XDEV_U2);
+
+	/* wait for ACK */
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	msleep(10);
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	/* Check L1 Status */
+	ret = handshake(xhci, pm_addr, PORT_L1S_MASK, PORT_L1S_SUCCESS, 125);
+	if (ret != -ETIMEDOUT) {
+		/* enter L1 successfully */
+		temp = xhci_readl(xhci, addr);
+		xhci_dbg(xhci, "port %d entered L1 state, port status 0x%x\n",
+				port_num, temp);
+		ret = 0;
+	} else {
+		temp = xhci_readl(xhci, pm_addr);
+		xhci_dbg(xhci, "port %d software lpm failed, L1 status %d\n",
+				port_num, temp & PORT_L1S_MASK);
+		ret = -EINVAL;
+	}
+
+	/* Resume the port */
+	xhci_set_link_state(xhci, port_array, port_num, XDEV_U0);
+
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	msleep(10);
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	/* Clear PLC */
+	xhci_test_and_clear_bit(xhci, port_array, port_num, PORT_PLC);
+
+	/* Check PORTSC to make sure the device is in the right state */
+	if (!ret) {
+		temp = xhci_readl(xhci, addr);
+		xhci_dbg(xhci, "resumed port %d status 0x%x\n",	port_num, temp);
+		if (!(temp & PORT_CONNECT) || !(temp & PORT_PE) ||
+				(temp & PORT_PLS_MASK) != XDEV_U0) {
+			xhci_dbg(xhci, "port L1 resume fail\n");
+			ret = -EINVAL;
+		}
+	}
+
+	if (ret) {
+		/* Insert dev to lpm_failed_devs list */
+		xhci_warn(xhci, "device LPM test failed, may disconnect and "
+				"re-enumerate\n");
+		dev_info = kzalloc(sizeof(struct dev_info), GFP_ATOMIC);
+		if (!dev_info) {
+			ret = -ENOMEM;
+			goto finish;
+		}
+		dev_info->dev_id = dev_id;
+		INIT_LIST_HEAD(&dev_info->list);
+		list_add(&dev_info->list, &xhci->lpm_failed_devs);
+	} else {
+		xhci_ring_device(xhci, udev->slot_id);
+	}
+
+finish:
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return ret;
+}
+
+int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
+			struct usb_device *udev, int enable)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	__le32 __iomem	**port_array;
+	__le32 __iomem	*pm_addr;
+	u32		temp;
+	unsigned int	port_num;
+	unsigned long	flags;
+	int		u2del, hird;
+
+	if (hcd->speed == HCD_USB3 || !xhci->hw_lpm_support ||
+			!udev->lpm_capable)
+		return -EPERM;
+
+	if (!udev->parent || udev->parent->parent ||
+			udev->descriptor.bDeviceClass == USB_CLASS_HUB)
+		return -EPERM;
+
+	if (udev->usb2_hw_lpm_capable != 1)
+		return -EPERM;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	port_array = xhci->usb2_ports;
+	port_num = udev->portnum - 1;
+	pm_addr = port_array[port_num] + 1;
+	temp = xhci_readl(xhci, pm_addr);
+
+	xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n",
+			enable ? "enable" : "disable", port_num);
+
+	u2del = HCS_U2_LATENCY(xhci->hcs_params3);
+	if (le32_to_cpu(udev->bos->ext_cap->bmAttributes) & (1 << 2))
+		hird = xhci_calculate_hird_besl(u2del, 1);
+	else
+		hird = xhci_calculate_hird_besl(u2del, 0);
+
+	if (enable) {
+		temp &= ~PORT_HIRD_MASK;
+		temp |= PORT_HIRD(hird) | PORT_RWE;
+		xhci_writel(xhci, temp, pm_addr);
+		temp = xhci_readl(xhci, pm_addr);
+		temp |= PORT_HLE;
+		xhci_writel(xhci, temp, pm_addr);
+	} else {
+		temp &= ~(PORT_HLE | PORT_RWE | PORT_HIRD_MASK);
+		xhci_writel(xhci, temp, pm_addr);
+	}
+
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return 0;
+}
+
+int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	int		ret;
+
+	ret = xhci_usb2_software_lpm_test(hcd, udev);
+	if (!ret) {
+		xhci_dbg(xhci, "software LPM test succeed\n");
+		if (xhci->hw_lpm_support == 1) {
+			udev->usb2_hw_lpm_capable = 1;
+			ret = xhci_set_usb2_hardware_lpm(hcd, udev, 1);
+			if (!ret)
+				udev->usb2_hw_lpm_enabled = 1;
+		}
+	}
+
+	return 0;
+}
+
+#else
+
+int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
+				struct usb_device *udev, int enable)
+{
+	return 0;
+}
+
+int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	return 0;
+}
+
+#endif /* CONFIG_USB_SUSPEND */
+
 /* Once a hub descriptor is fetched for a device, we need to update the xHC's
  * internal data structures for the device.
  */
@@ -2988,6 +3873,14 @@ int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
 	}
 
 	spin_lock_irqsave(&xhci->lock, flags);
+	if (hdev->speed == USB_SPEED_HIGH &&
+			xhci_alloc_tt_info(xhci, vdev, hdev, tt, GFP_ATOMIC)) {
+		xhci_dbg(xhci, "Could not allocate xHCI TT structure.\n");
+		xhci_free_command(xhci, config_cmd);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return -ENOMEM;
+	}
+
 	xhci_slot_copy(xhci, config_cmd->in_ctx, vdev->out_ctx);
 	ctrl_ctx = xhci_get_input_control_ctx(xhci, config_cmd->in_ctx);
 	ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
@@ -3051,22 +3944,108 @@ int xhci_get_frame(struct usb_hcd *hcd)
 	return xhci_readl(xhci, &xhci->run_regs->microframe_index) >> 3;
 }
 
+int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
+{
+	struct xhci_hcd		*xhci;
+	struct device		*dev = hcd->self.controller;
+	int			retval;
+	u32			temp;
+
+	hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2;
+
+	if (usb_hcd_is_primary_hcd(hcd)) {
+		xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
+		if (!xhci)
+			return -ENOMEM;
+		*((struct xhci_hcd **) hcd->hcd_priv) = xhci;
+		xhci->main_hcd = hcd;
+		/* Mark the first roothub as being USB 2.0.
+		 * The xHCI driver will register the USB 3.0 roothub.
+		 */
+		hcd->speed = HCD_USB2;
+		hcd->self.root_hub->speed = USB_SPEED_HIGH;
+		/*
+		 * USB 2.0 roothub under xHCI has an integrated TT,
+		 * (rate matching hub) as opposed to having an OHCI/UHCI
+		 * companion controller.
+		 */
+		hcd->has_tt = 1;
+	} else {
+		/* xHCI private pointer was set in xhci_pci_probe for the second
+		 * registered roothub.
+		 */
+		xhci = hcd_to_xhci(hcd);
+		temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+		if (HCC_64BIT_ADDR(temp)) {
+			xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
+			dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
+		} else {
+			dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
+		}
+		return 0;
+	}
+
+	xhci->cap_regs = hcd->regs;
+	xhci->op_regs = hcd->regs +
+		HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase));
+	xhci->run_regs = hcd->regs +
+		(xhci_readl(xhci, &xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
+	/* Cache read-only capability registers */
+	xhci->hcs_params1 = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
+	xhci->hcs_params2 = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
+	xhci->hcs_params3 = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
+	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
+	xhci->hci_version = HC_VERSION(xhci->hcc_params);
+	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+	xhci_print_registers(xhci);
+
+	get_quirks(dev, xhci);
+
+	/* Make sure the HC is halted. */
+	retval = xhci_halt(xhci);
+	if (retval)
+		goto error;
+
+	xhci_dbg(xhci, "Resetting HCD\n");
+	/* Reset the internal HC memory state and registers. */
+	retval = xhci_reset(xhci);
+	if (retval)
+		goto error;
+	xhci_dbg(xhci, "Reset complete\n");
+
+	temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
+	if (HCC_64BIT_ADDR(temp)) {
+		xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
+		dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
+	} else {
+		dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
+	}
+
+	xhci_dbg(xhci, "Calling HCD init\n");
+	/* Initialize HCD and host controller data structures. */
+	retval = xhci_init(hcd);
+	if (retval)
+		goto error;
+	xhci_dbg(xhci, "Called HCD init\n");
+	return 0;
+error:
+	kfree(xhci);
+	return retval;
+}
+
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_LICENSE("GPL");
 
 static int __init xhci_hcd_init(void)
 {
-#ifdef CONFIG_PCI
-	int retval = 0;
+	int retval;
 
 	retval = xhci_register_pci();
-
 	if (retval < 0) {
 		printk(KERN_DEBUG "Problem registering PCI driver.");
 		return retval;
 	}
-#endif
 	/*
 	 * Check the compiler generated sizes of structures that must be laid
 	 * out in specific ways for hardware access.
@@ -3091,8 +4070,6 @@ module_init(xhci_hcd_init);
 
 static void __exit xhci_hcd_cleanup(void)
 {
-#ifdef CONFIG_PCI
 	xhci_unregister_pci();
-#endif
 }
 module_exit(xhci_hcd_cleanup);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index cae8e23..3c8fbd2 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -272,6 +272,7 @@ struct xhci_op_regs {
  */
 #define PORT_PLS_MASK	(0xf << 5)
 #define XDEV_U0		(0x0 << 5)
+#define XDEV_U2		(0x2 << 5)
 #define XDEV_U3		(0x3 << 5)
 #define XDEV_RESUME	(0xf << 5)
 /* true: port has power (see HCC_PPC) */
@@ -362,7 +363,13 @@ struct xhci_op_regs {
 /* Bits 24:31 for port testing */
 
 /* USB2 Protocol PORTSPMSC */
-#define PORT_RWE	(1 << 0x3)
+#define	PORT_L1S_MASK		7
+#define	PORT_L1S_SUCCESS	1
+#define	PORT_RWE		(1 << 3)
+#define	PORT_HIRD(p)		(((p) & 0xf) << 4)
+#define	PORT_HIRD_MASK		(0xf << 4)
+#define	PORT_L1DS(p)		(((p) & 0xff) << 8)
+#define	PORT_HLE		(1 << 16)
 
 /**
  * struct xhci_intr_reg - Interrupt Register Set
@@ -611,11 +618,13 @@ struct xhci_ep_ctx {
 #define EP_STATE_ERROR		4
 /* Mult - Max number of burtst within an interval, in EP companion desc. */
 #define EP_MULT(p)		(((p) & 0x3) << 8)
+#define CTX_TO_EP_MULT(p)	(((p) >> 8) & 0x3)
 /* bits 10:14 are Max Primary Streams */
 /* bit 15 is Linear Stream Array */
 /* Interval - period between requests to an endpoint - 125u increments. */
 #define EP_INTERVAL(p)		(((p) & 0xff) << 16)
 #define EP_INTERVAL_TO_UFRAMES(p)		(1 << (((p) >> 16) & 0xff))
+#define CTX_TO_EP_INTERVAL(p)	(((p) >> 16) & 0xff)
 #define EP_MAXPSTREAMS_MASK	(0x1f << 10)
 #define EP_MAXPSTREAMS(p)	(((p) << 10) & EP_MAXPSTREAMS_MASK)
 /* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
@@ -640,6 +649,7 @@ struct xhci_ep_ctx {
 /* bit 6 reserved */
 /* bit 7 is Host Initiate Disable - for disabling stream selection */
 #define MAX_BURST(p)	(((p)&0xff) << 8)
+#define CTX_TO_MAX_BURST(p)	(((p) >> 8) & 0xff)
 #define MAX_PACKET(p)	(((p)&0xffff) << 16)
 #define MAX_PACKET_MASK		(0xffff << 16)
 #define MAX_PACKET_DECODED(p)	(((p) >> 16) & 0xffff)
@@ -652,6 +662,7 @@ struct xhci_ep_ctx {
 /* tx_info bitmasks */
 #define AVG_TRB_LENGTH_FOR_EP(p)	((p) & 0xffff)
 #define MAX_ESIT_PAYLOAD_FOR_EP(p)	(((p) & 0xffff) << 16)
+#define CTX_TO_MAX_ESIT_PAYLOAD(p)	(((p) >> 16) & 0xffff)
 
 /* deq bitmasks */
 #define EP_CTX_CYCLE_MASK		(1 << 0)
@@ -670,6 +681,11 @@ struct xhci_input_control_ctx {
 	__le32	rsvd2[6];
 };
 
+#define	EP_IS_ADDED(ctrl_ctx, i) \
+	(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))
+#define	EP_IS_DROPPED(ctrl_ctx, i)       \
+	(le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1)))
+
 /* Represents everything that is needed to issue a command on the command ring.
  * It's useful to pre-allocate these for commands that cannot fail due to
  * out-of-memory errors, like freeing streams.
@@ -731,6 +747,67 @@ struct xhci_stream_info {
 #define	SMALL_STREAM_ARRAY_SIZE		256
 #define	MEDIUM_STREAM_ARRAY_SIZE	1024
 
+/* Some Intel xHCI host controllers need software to keep track of the bus
+ * bandwidth.  Keep track of endpoint info here.  Each root port is allocated
+ * the full bus bandwidth.  We must also treat TTs (including each port under a
+ * multi-TT hub) as a separate bandwidth domain.  The direct memory interface
+ * (DMI) also limits the total bandwidth (across all domains) that can be used.
+ */
+struct xhci_bw_info {
+	/* ep_interval is zero-based */
+	unsigned int		ep_interval;
+	/* mult and num_packets are one-based */
+	unsigned int		mult;
+	unsigned int		num_packets;
+	unsigned int		max_packet_size;
+	unsigned int		max_esit_payload;
+	unsigned int		type;
+};
+
+/* "Block" sizes in bytes the hardware uses for different device speeds.
+ * The logic in this part of the hardware limits the number of bits the hardware
+ * can use, so must represent bandwidth in a less precise manner to mimic what
+ * the scheduler hardware computes.
+ */
+#define	FS_BLOCK	1
+#define	HS_BLOCK	4
+#define	SS_BLOCK	16
+#define	DMI_BLOCK	32
+
+/* Each device speed has a protocol overhead (CRC, bit stuffing, etc) associated
+ * with each byte transferred.  SuperSpeed devices have an initial overhead to
+ * set up bursts.  These are in blocks, see above.  LS overhead has already been
+ * translated into FS blocks.
+ */
+#define DMI_OVERHEAD 8
+#define DMI_OVERHEAD_BURST 4
+#define SS_OVERHEAD 8
+#define SS_OVERHEAD_BURST 32
+#define HS_OVERHEAD 26
+#define FS_OVERHEAD 20
+#define LS_OVERHEAD 128
+/* The TTs need to claim roughly twice as much bandwidth (94 bytes per
+ * microframe ~= 24Mbps) of the HS bus as the devices can actually use because
+ * of overhead associated with split transfers crossing microframe boundaries.
+ * 31 blocks is pure protocol overhead.
+ */
+#define TT_HS_OVERHEAD (31 + 94)
+#define TT_DMI_OVERHEAD (25 + 12)
+
+/* Bandwidth limits in blocks */
+#define FS_BW_LIMIT		1285
+#define TT_BW_LIMIT		1320
+#define HS_BW_LIMIT		1607
+#define SS_BW_LIMIT_IN		3906
+#define DMI_BW_LIMIT_IN		3906
+#define SS_BW_LIMIT_OUT		3906
+#define DMI_BW_LIMIT_OUT	3906
+
+/* Percentage of bus bandwidth reserved for non-periodic transfers */
+#define FS_BW_RESERVED		10
+#define HS_BW_RESERVED		20
+#define SS_BW_RESERVED		10
+
 struct xhci_virt_ep {
 	struct xhci_ring		*ring;
 	/* Related to endpoints that are configured to use stream IDs only */
@@ -772,8 +849,39 @@ struct xhci_virt_ep {
 	 * process the missed tds on the endpoint ring.
 	 */
 	bool			skip;
+	/* Bandwidth checking storage */
+	struct xhci_bw_info	bw_info;
+	struct list_head	bw_endpoint_list;
+};
+
+enum xhci_overhead_type {
+	LS_OVERHEAD_TYPE = 0,
+	FS_OVERHEAD_TYPE,
+	HS_OVERHEAD_TYPE,
+};
+
+struct xhci_interval_bw {
+	unsigned int		num_packets;
+	/* Sorted by max packet size.
+	 * Head of the list is the greatest max packet size.
+	 */
+	struct list_head	endpoints;
+	/* How many endpoints of each speed are present. */
+	unsigned int		overhead[3];
+};
+
+#define	XHCI_MAX_INTERVAL	16
+
+struct xhci_interval_bw_table {
+	unsigned int		interval0_esit_payload;
+	struct xhci_interval_bw	interval_bw[XHCI_MAX_INTERVAL];
+	/* Includes reserved bandwidth for async endpoints */
+	unsigned int		bw_used;
+	unsigned int		ss_bw_in;
+	unsigned int		ss_bw_out;
 };
 
+
 struct xhci_virt_device {
 	struct usb_device		*udev;
 	/*
@@ -798,7 +906,32 @@ struct xhci_virt_device {
 	/* Status of the last command issued for this device */
 	u32				cmd_status;
 	struct list_head		cmd_list;
-	u8				port;
+	u8				fake_port;
+	u8				real_port;
+	struct xhci_interval_bw_table	*bw_table;
+	struct xhci_tt_bw_info		*tt_info;
+};
+
+/*
+ * For each roothub, keep track of the bandwidth information for each periodic
+ * interval.
+ *
+ * If a high speed hub is attached to the roothub, each TT associated with that
+ * hub is a separate bandwidth domain.  The interval information for the
+ * endpoints on the devices under that TT will appear in the TT structure.
+ */
+struct xhci_root_port_bw_info {
+	struct list_head		tts;
+	unsigned int			num_active_tts;
+	struct xhci_interval_bw_table	bw_table;
+};
+
+struct xhci_tt_bw_info {
+	struct list_head		tt_list;
+	int				slot_id;
+	int				ttport;
+	struct xhci_interval_bw_table	bw_table;
+	int				active_eps;
 };
 
 
@@ -1198,6 +1331,12 @@ struct s3_save {
 	u64	erst_dequeue;
 };
 
+/* Use for lpm */
+struct dev_info {
+	u32			dev_id;
+	struct	list_head	list;
+};
+
 struct xhci_bus_state {
 	unsigned long		bus_suspended;
 	unsigned long		next_statechange;
@@ -1261,12 +1400,16 @@ struct xhci_hcd {
 	struct xhci_erst	erst;
 	/* Scratchpad */
 	struct xhci_scratchpad  *scratchpad;
+	/* Store LPM test failed devices' information */
+	struct list_head	lpm_failed_devs;
 
 	/* slot enabling and address device helpers */
 	struct completion	addr_dev;
 	int slot_id;
 	/* Internal mirror of the HW's dcbaa */
 	struct xhci_virt_device	*devs[MAX_HC_SLOTS];
+	/* For keeping track of bandwidth domains per roothub. */
+	struct xhci_root_port_bw_info	*rh_bw;
 
 	/* DMA pools */
 	struct dma_pool	*device_pool;
@@ -1318,6 +1461,8 @@ struct xhci_hcd {
 #define XHCI_EP_LIMIT_QUIRK	(1 << 5)
 #define XHCI_BROKEN_MSI		(1 << 6)
 #define XHCI_RESET_ON_RESUME	(1 << 7)
+#define	XHCI_SW_BW_CHECKING	(1 << 8)
+#define XHCI_AMD_0x96_HOST	(1 << 9)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */
@@ -1330,6 +1475,10 @@ struct xhci_hcd {
 	/* Array of pointers to USB 2.0 PORTSC registers */
 	__le32 __iomem		**usb2_ports;
 	unsigned int		num_usb2_ports;
+	/* support xHCI 0.96 spec USB2 software LPM */
+	unsigned		sw_lpm_support:1;
+	/* support xHCI 1.0 spec USB2 hardware LPM */
+	unsigned		hw_lpm_support:1;
 };
 
 /* convert between an HCD pointer and the corresponding EHCI_HCD */
@@ -1401,9 +1550,7 @@ static inline void xhci_write_64(struct xhci_hcd *xhci,
 
 static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci)
 {
-	u32 temp = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
-	return ((HC_VERSION(temp) == 0x95) &&
-			(xhci->quirks & XHCI_LINK_TRB_QUIRK));
+	return xhci->quirks & XHCI_LINK_TRB_QUIRK;
 }
 
 /* xHCI debugging */
@@ -1438,6 +1585,20 @@ unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
 unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index);
 unsigned int xhci_last_valid_endpoint(u32 added_ctxs);
 void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep);
+void xhci_drop_ep_from_interval_table(struct xhci_hcd *xhci,
+		struct xhci_bw_info *ep_bw,
+		struct xhci_interval_bw_table *bw_table,
+		struct usb_device *udev,
+		struct xhci_virt_ep *virt_ep,
+		struct xhci_tt_bw_info *tt_info);
+void xhci_update_tt_active_eps(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		int old_active_eps);
+void xhci_clear_endpoint_bw_info(struct xhci_bw_info *bw_info);
+void xhci_update_bw_info(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *in_ctx,
+		struct xhci_input_control_ctx *ctrl_ctx,
+		struct xhci_virt_device *virt_dev);
 void xhci_endpoint_copy(struct xhci_hcd *xhci,
 		struct xhci_container_ctx *in_ctx,
 		struct xhci_container_ctx *out_ctx,
@@ -1483,9 +1644,13 @@ void xhci_free_command(struct xhci_hcd *xhci,
 /* xHCI PCI glue */
 int xhci_register_pci(void);
 void xhci_unregister_pci(void);
+#else
+static inline int xhci_register_pci(void) { return 0; }
+static inline void xhci_unregister_pci(void) {}
 #endif
 
 /* xHCI host controller glue */
+typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
 void xhci_quiesce(struct xhci_hcd *xhci);
 int xhci_halt(struct xhci_hcd *xhci);
 int xhci_reset(struct xhci_hcd *xhci);
@@ -1493,6 +1658,7 @@ int xhci_init(struct usb_hcd *hcd);
 int xhci_run(struct usb_hcd *hcd);
 void xhci_stop(struct usb_hcd *hcd);
 void xhci_shutdown(struct usb_hcd *hcd);
+int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
 
 #ifdef	CONFIG_PM
 int xhci_suspend(struct xhci_hcd *xhci);
@@ -1507,6 +1673,10 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd);
 irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd);
 int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev);
 void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_alloc_tt_info(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		struct usb_device *hdev,
+		struct usb_tt *tt, gfp_t mem_flags);
 int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
 		struct usb_host_endpoint **eps, unsigned int num_eps,
 		unsigned int num_streams, gfp_t mem_flags);
@@ -1514,6 +1684,9 @@ int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
 		struct usb_host_endpoint **eps, unsigned int num_eps,
 		gfp_t mem_flags);
 int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
+				struct usb_device *udev, int enable);
 int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
 			struct usb_tt *tt, gfp_t mem_flags);
 int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
@@ -1572,6 +1745,10 @@ void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
 		unsigned int ep_index, unsigned int stream_id);
 
 /* xHCI roothub code */
+void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
+				int port_id, u32 link_state);
+void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
+				int port_id, u32 port_bit);
 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
 		char *buf, u16 wLength);
 int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index a6afd15..fe85871 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -213,7 +213,7 @@ static void adu_interrupt_in_callback(struct urb *urb)
 
 	if (urb->actual_length > 0 && dev->interrupt_in_buffer[0] != 0x00) {
 		if (dev->read_buffer_length <
-		    (4 * le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize)) -
+		    (4 * usb_endpoint_maxp(dev->interrupt_in_endpoint)) -
 		     (urb->actual_length)) {
 			memcpy (dev->read_buffer_primary +
 				dev->read_buffer_length,
@@ -315,7 +315,7 @@ static int adu_open(struct inode *inode, struct file *file)
 			 usb_rcvintpipe(dev->udev,
 					dev->interrupt_in_endpoint->bEndpointAddress),
 			 dev->interrupt_in_buffer,
-			 le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize),
+			 usb_endpoint_maxp(dev->interrupt_in_endpoint),
 			 adu_interrupt_in_callback, dev,
 			 dev->interrupt_in_endpoint->bInterval);
 	dev->read_urb_finished = 0;
@@ -483,7 +483,7 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
 							 usb_rcvintpipe(dev->udev,
 							 		dev->interrupt_in_endpoint->bEndpointAddress),
 							 dev->interrupt_in_buffer,
-							 le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize),
+							 usb_endpoint_maxp(dev->interrupt_in_endpoint),
 							 adu_interrupt_in_callback,
 							 dev,
 							 dev->interrupt_in_endpoint->bInterval);
@@ -536,7 +536,7 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
 				 usb_rcvintpipe(dev->udev,
 				 		dev->interrupt_in_endpoint->bEndpointAddress),
 				dev->interrupt_in_buffer,
-				le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize),
+				usb_endpoint_maxp(dev->interrupt_in_endpoint),
 				adu_interrupt_in_callback,
 				dev,
 				dev->interrupt_in_endpoint->bInterval);
@@ -622,7 +622,7 @@ static ssize_t adu_write(struct file *file, const __user char *buffer,
 			dbg(4," %s : sending, count = %Zd", __func__, count);
 
 			/* write the data into interrupt_out_buffer from userspace */
-			buffer_size = le16_to_cpu(dev->interrupt_out_endpoint->wMaxPacketSize);
+			buffer_size = usb_endpoint_maxp(dev->interrupt_out_endpoint);
 			bytes_to_write = count > buffer_size ? buffer_size : count;
 			dbg(4," %s : buffer_size = %Zd, count = %Zd, bytes_to_write = %Zd",
 			    __func__, buffer_size, count, bytes_to_write);
@@ -752,8 +752,8 @@ static int adu_probe(struct usb_interface *interface,
 		goto error;
 	}
 
-	in_end_size = le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize);
-	out_end_size = le16_to_cpu(dev->interrupt_out_endpoint->wMaxPacketSize);
+	in_end_size = usb_endpoint_maxp(dev->interrupt_in_endpoint);
+	out_end_size = usb_endpoint_maxp(dev->interrupt_out_endpoint);
 
 	dev->read_buffer_primary = kmalloc((4 * in_end_size), GFP_KERNEL);
 	if (!dev->read_buffer_primary) {
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index 2f41089c..2dbe600 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -2777,7 +2777,7 @@ static int ftdi_elan_probe(struct usb_interface *interface,
                 endpoint = &iface_desc->endpoint[i].desc;
                 if (!ftdi->bulk_in_endpointAddr &&
 		    usb_endpoint_is_bulk_in(endpoint)) {
-                        buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+                        buffer_size = usb_endpoint_maxp(endpoint);
                         ftdi->bulk_in_size = buffer_size;
                         ftdi->bulk_in_endpointAddr = endpoint->bEndpointAddress;
                         ftdi->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
index c6184b4..515b67f 100644
--- a/drivers/usb/misc/idmouse.c
+++ b/drivers/usb/misc/idmouse.c
@@ -359,7 +359,7 @@ static int idmouse_probe(struct usb_interface *interface,
 	endpoint = &iface_desc->endpoint[0].desc;
 	if (!dev->bulk_in_endpointAddr && usb_endpoint_is_bulk_in(endpoint)) {
 		/* we found a bulk in endpoint */
-		dev->orig_bi_size = le16_to_cpu(endpoint->wMaxPacketSize);
+		dev->orig_bi_size = usb_endpoint_maxp(endpoint);
 		dev->bulk_in_size = 0x200; /* works _much_ faster */
 		dev->bulk_in_endpointAddr = endpoint->bEndpointAddress;
 		dev->bulk_in_buffer =
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index a2190b9..8145790 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -803,7 +803,7 @@ static int iowarrior_probe(struct usb_interface *interface,
 			dev->int_out_endpoint = endpoint;
 	}
 	/* we have to check the report_size often, so remember it in the endianess suitable for our machine */
-	dev->report_size = le16_to_cpu(dev->int_in_endpoint->wMaxPacketSize);
+	dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint);
 	if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) &&
 	    (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56))
 		/* IOWarrior56 has wMaxPacketSize different from report size */
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index cb40962..48c166f 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -721,7 +721,7 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id *
 	if (dev->interrupt_out_endpoint == NULL)
 		dev_warn(&intf->dev, "Interrupt out endpoint not found (using control endpoint instead)\n");
 
-	dev->interrupt_in_endpoint_size = le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize);
+	dev->interrupt_in_endpoint_size = usb_endpoint_maxp(dev->interrupt_in_endpoint);
 	dev->ring_buffer = kmalloc(ring_buffer_size*(sizeof(size_t)+dev->interrupt_in_endpoint_size), GFP_KERNEL);
 	if (!dev->ring_buffer) {
 		dev_err(&intf->dev, "Couldn't allocate ring_buffer\n");
@@ -737,7 +737,7 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id *
 		dev_err(&intf->dev, "Couldn't allocate interrupt_in_urb\n");
 		goto error;
 	}
-	dev->interrupt_out_endpoint_size = dev->interrupt_out_endpoint ? le16_to_cpu(dev->interrupt_out_endpoint->wMaxPacketSize) :
+	dev->interrupt_out_endpoint_size = dev->interrupt_out_endpoint ? usb_endpoint_maxp(dev->interrupt_out_endpoint) :
 									 udev->descriptor.bMaxPacketSize0;
 	dev->interrupt_out_buffer = kmalloc(write_buffer_size*dev->interrupt_out_endpoint_size, GFP_KERNEL);
 	if (!dev->interrupt_out_buffer) {
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index 6482c6e..a989356 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -409,7 +409,7 @@ static int tower_open (struct inode *inode, struct file *file)
 			  dev->udev,
 			  usb_rcvintpipe(dev->udev, dev->interrupt_in_endpoint->bEndpointAddress),
 			  dev->interrupt_in_buffer,
-			  le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize),
+			  usb_endpoint_maxp(dev->interrupt_in_endpoint),
 			  tower_interrupt_in_callback,
 			  dev,
 			  dev->interrupt_in_interval);
@@ -928,7 +928,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device
 		err("Couldn't allocate read_buffer");
 		goto error;
 	}
-	dev->interrupt_in_buffer = kmalloc (le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize), GFP_KERNEL);
+	dev->interrupt_in_buffer = kmalloc (usb_endpoint_maxp(dev->interrupt_in_endpoint), GFP_KERNEL);
 	if (!dev->interrupt_in_buffer) {
 		err("Couldn't allocate interrupt_in_buffer");
 		goto error;
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index 5164815..1871cdf 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -18,7 +18,7 @@
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/mutex.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 
 #define DRIVER_VERSION "USBLCD Driver Version 1.05"
@@ -34,22 +34,29 @@ static const struct usb_device_id id_table[] = {
 	{ .idVendor = 0x10D2, .match_flags = USB_DEVICE_ID_MATCH_VENDOR, },
 	{ },
 };
-MODULE_DEVICE_TABLE (usb, id_table);
+MODULE_DEVICE_TABLE(usb, id_table);
 
 static DEFINE_MUTEX(open_disc_mutex);
 
 
 struct usb_lcd {
-	struct usb_device *	udev;			/* init: probe_lcd */
-	struct usb_interface *  interface;		/* the interface for this device */
-	unsigned char *         bulk_in_buffer;		/* the buffer to receive data */
-	size_t			bulk_in_size;		/* the size of the receive buffer */
-	__u8			bulk_in_endpointAddr;	/* the address of the bulk in endpoint */
-	__u8			bulk_out_endpointAddr;	/* the address of the bulk out endpoint */
+	struct usb_device	*udev;			/* init: probe_lcd */
+	struct usb_interface	*interface;		/* the interface for
+							   this device */
+	unsigned char		*bulk_in_buffer;	/* the buffer to receive
+							   data */
+	size_t			bulk_in_size;		/* the size of the
+							   receive buffer */
+	__u8			bulk_in_endpointAddr;	/* the address of the
+							   bulk in endpoint */
+	__u8			bulk_out_endpointAddr;	/* the address of the
+							   bulk out endpoint */
 	struct kref		kref;
-	struct semaphore	limit_sem;		/* to stop writes at full throttle from
-							 * using up all RAM */
-	struct usb_anchor	submitted;		/* URBs to wait for before suspend */
+	struct semaphore	limit_sem;		/* to stop writes at
+							   full throttle from
+							   using up all RAM */
+	struct usb_anchor	submitted;		/* URBs to wait for
+							   before suspend */
 };
 #define to_lcd_dev(d) container_of(d, struct usb_lcd, kref)
 
@@ -63,8 +70,8 @@ static void lcd_delete(struct kref *kref)
 	struct usb_lcd *dev = to_lcd_dev(kref);
 
 	usb_put_dev(dev->udev);
-	kfree (dev->bulk_in_buffer);
-	kfree (dev);
+	kfree(dev->bulk_in_buffer);
+	kfree(dev);
 }
 
 
@@ -80,7 +87,7 @@ static int lcd_open(struct inode *inode, struct file *file)
 	interface = usb_find_interface(&lcd_driver, subminor);
 	if (!interface) {
 		mutex_unlock(&lcd_mutex);
-		err ("USBLCD: %s - error, can't find device for minor %d",
+		err("USBLCD: %s - error, can't find device for minor %d",
 		     __func__, subminor);
 		return -ENODEV;
 	}
@@ -126,7 +133,8 @@ static int lcd_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static ssize_t lcd_read(struct file *file, char __user * buffer, size_t count, loff_t *ppos)
+static ssize_t lcd_read(struct file *file, char __user * buffer,
+			size_t count, loff_t *ppos)
 {
 	struct usb_lcd *dev;
 	int retval = 0;
@@ -135,8 +143,9 @@ static ssize_t lcd_read(struct file *file, char __user * buffer, size_t count, l
 	dev = file->private_data;
 
 	/* do a blocking bulk read to get data from the device */
-	retval = usb_bulk_msg(dev->udev, 
-			      usb_rcvbulkpipe(dev->udev, dev->bulk_in_endpointAddr),
+	retval = usb_bulk_msg(dev->udev,
+			      usb_rcvbulkpipe(dev->udev,
+					      dev->bulk_in_endpointAddr),
 			      dev->bulk_in_buffer,
 			      min(dev->bulk_in_size, count),
 			      &bytes_read, 10000);
@@ -161,23 +170,23 @@ static long lcd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	dev = file->private_data;
 	if (dev == NULL)
 		return -ENODEV;
-	
+
 	switch (cmd) {
 	case IOCTL_GET_HARD_VERSION:
 		mutex_lock(&lcd_mutex);
 		bcdDevice = le16_to_cpu((dev->udev)->descriptor.bcdDevice);
-		sprintf(buf,"%1d%1d.%1d%1d",
+		sprintf(buf, "%1d%1d.%1d%1d",
 			(bcdDevice & 0xF000)>>12,
 			(bcdDevice & 0xF00)>>8,
 			(bcdDevice & 0xF0)>>4,
 			(bcdDevice & 0xF));
 		mutex_unlock(&lcd_mutex);
-		if (copy_to_user((void __user *)arg,buf,strlen(buf))!=0)
+		if (copy_to_user((void __user *)arg, buf, strlen(buf)) != 0)
 			return -EFAULT;
 		break;
 	case IOCTL_GET_DRV_VERSION:
-		sprintf(buf,DRIVER_VERSION);
-		if (copy_to_user((void __user *)arg,buf,strlen(buf))!=0)
+		sprintf(buf, DRIVER_VERSION);
+		if (copy_to_user((void __user *)arg, buf, strlen(buf)) != 0)
 			return -EFAULT;
 		break;
 	default:
@@ -199,7 +208,7 @@ static void lcd_write_bulk_callback(struct urb *urb)
 	if (status &&
 	    !(status == -ENOENT ||
 	      status == -ECONNRESET ||
-              status == -ESHUTDOWN)) {
+	      status == -ESHUTDOWN)) {
 		dbg("USBLCD: %s - nonzero write bulk status received: %d",
 		    __func__, status);
 	}
@@ -210,15 +219,16 @@ static void lcd_write_bulk_callback(struct urb *urb)
 	up(&dev->limit_sem);
 }
 
-static ssize_t lcd_write(struct file *file, const char __user * user_buffer, size_t count, loff_t *ppos)
+static ssize_t lcd_write(struct file *file, const char __user * user_buffer,
+			 size_t count, loff_t *ppos)
 {
 	struct usb_lcd *dev;
-        int retval = 0, r;
+	int retval = 0, r;
 	struct urb *urb = NULL;
 	char *buf = NULL;
-	
+
 	dev = file->private_data;
-	
+
 	/* verify that we actually have some data to write */
 	if (count == 0)
 		goto exit;
@@ -233,34 +243,38 @@ static ssize_t lcd_write(struct file *file, const char __user * user_buffer, siz
 		retval = -ENOMEM;
 		goto err_no_buf;
 	}
-	
-	buf = usb_alloc_coherent(dev->udev, count, GFP_KERNEL, &urb->transfer_dma);
+
+	buf = usb_alloc_coherent(dev->udev, count, GFP_KERNEL,
+				 &urb->transfer_dma);
 	if (!buf) {
 		retval = -ENOMEM;
 		goto error;
 	}
-	
+
 	if (copy_from_user(buf, user_buffer, count)) {
 		retval = -EFAULT;
 		goto error;
 	}
-	
+
 	/* initialize the urb properly */
 	usb_fill_bulk_urb(urb, dev->udev,
-			  usb_sndbulkpipe(dev->udev, dev->bulk_out_endpointAddr),
+			  usb_sndbulkpipe(dev->udev,
+			  dev->bulk_out_endpointAddr),
 			  buf, count, lcd_write_bulk_callback, dev);
 	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
 	usb_anchor_urb(urb, &dev->submitted);
-	
+
 	/* send the data out the bulk port */
 	retval = usb_submit_urb(urb, GFP_KERNEL);
 	if (retval) {
-		err("USBLCD: %s - failed submitting write urb, error %d", __func__, retval);
+		err("USBLCD: %s - failed submitting write urb, error %d",
+		    __func__, retval);
 		goto error_unanchor;
 	}
-	
-	/* release our reference to this urb, the USB core will eventually free it entirely */
+
+	/* release our reference to this urb,
+	   the USB core will eventually free it entirely */
 	usb_free_urb(urb);
 
 exit:
@@ -276,13 +290,13 @@ err_no_buf:
 }
 
 static const struct file_operations lcd_fops = {
-        .owner =        THIS_MODULE,
-        .read =         lcd_read,
-        .write =        lcd_write,
-        .open =         lcd_open,
+	.owner =        THIS_MODULE,
+	.read =         lcd_read,
+	.write =        lcd_write,
+	.open =         lcd_open,
 	.unlocked_ioctl = lcd_ioctl,
-        .release =      lcd_release,
-        .llseek =	 noop_llseek,
+	.release =      lcd_release,
+	.llseek =	 noop_llseek,
 };
 
 /*
@@ -290,12 +304,13 @@ static const struct file_operations lcd_fops = {
  * and to have the device registered with the driver core
  */
 static struct usb_class_driver lcd_class = {
-        .name =         "lcd%d",
-        .fops =         &lcd_fops,
-        .minor_base =   USBLCD_MINOR,
+	.name =         "lcd%d",
+	.fops =         &lcd_fops,
+	.minor_base =   USBLCD_MINOR,
 };
 
-static int lcd_probe(struct usb_interface *interface, const struct usb_device_id *id)
+static int lcd_probe(struct usb_interface *interface,
+		     const struct usb_device_id *id)
 {
 	struct usb_lcd *dev = NULL;
 	struct usb_host_interface *iface_desc;
@@ -322,7 +337,7 @@ static int lcd_probe(struct usb_interface *interface, const struct usb_device_id
 		retval = -ENODEV;
 		goto error;
 	}
-	
+
 	/* set up the endpoint information */
 	/* use only the first bulk-in and bulk-out endpoints */
 	iface_desc = interface->cur_altsetting;
@@ -332,7 +347,7 @@ static int lcd_probe(struct usb_interface *interface, const struct usb_device_id
 		if (!dev->bulk_in_endpointAddr &&
 		    usb_endpoint_is_bulk_in(endpoint)) {
 			/* we found a bulk in endpoint */
-			buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+			buffer_size = usb_endpoint_maxp(endpoint);
 			dev->bulk_in_size = buffer_size;
 			dev->bulk_in_endpointAddr = endpoint->bEndpointAddress;
 			dev->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
@@ -369,7 +384,7 @@ static int lcd_probe(struct usb_interface *interface, const struct usb_device_id
 
 	dev_info(&interface->dev, "USBLCD Version %1d%1d.%1d%1d found "
 		 "at address %d\n", (i & 0xF000)>>12, (i & 0xF00)>>8,
-		 (i & 0xF0)>>4,(i & 0xF), dev->udev->devnum);
+		 (i & 0xF0)>>4, (i & 0xF), dev->udev->devnum);
 
 	/* let the user know what node this device is now attached to */
 	dev_info(&interface->dev, "USB LCD device now attached to USBLCD-%d\n",
@@ -401,7 +416,7 @@ static int lcd_suspend(struct usb_interface *intf, pm_message_t message)
 	return 0;
 }
 
-static int lcd_resume (struct usb_interface *intf)
+static int lcd_resume(struct usb_interface *intf)
 {
 	return 0;
 }
@@ -409,16 +424,16 @@ static int lcd_resume (struct usb_interface *intf)
 static void lcd_disconnect(struct usb_interface *interface)
 {
 	struct usb_lcd *dev;
-        int minor = interface->minor;
+	int minor = interface->minor;
 
 	mutex_lock(&open_disc_mutex);
-        dev = usb_get_intfdata(interface);
-        usb_set_intfdata(interface, NULL);
+	dev = usb_get_intfdata(interface);
+	usb_set_intfdata(interface, NULL);
 	mutex_unlock(&open_disc_mutex);
 
-        /* give back our minor */
-        usb_deregister_dev(interface, &lcd_class);
- 
+	/* give back our minor */
+	usb_deregister_dev(interface, &lcd_class);
+
 	/* decrement our usage count */
 	kref_put(&dev->kref, lcd_delete);
 
@@ -438,7 +453,7 @@ static struct usb_driver lcd_driver = {
 static int __init usb_lcd_init(void)
 {
 	int result;
-	
+
 	result = usb_register(&lcd_driver);
 	if (result)
 		err("usb_register failed. Error number %d", result);
diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c
index 1616ad1..43f84e5 100644
--- a/drivers/usb/misc/usbled.c
+++ b/drivers/usb/misc/usbled.c
@@ -33,10 +33,10 @@ static const struct usb_device_id id_table[] = {
 			.driver_info = DREAM_CHEEKY_WEBMAIL_NOTIFIER },
 	{ },
 };
-MODULE_DEVICE_TABLE (usb, id_table);
+MODULE_DEVICE_TABLE(usb, id_table);
 
 struct usb_led {
-	struct usb_device *	udev;
+	struct usb_device	*udev;
 	unsigned char		blue;
 	unsigned char		red;
 	unsigned char		green;
@@ -113,14 +113,16 @@ static void change_color(struct usb_led *led)
 }
 
 #define show_set(value)	\
-static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf)		\
+static ssize_t show_##value(struct device *dev, struct device_attribute *attr,\
+			    char *buf)					\
 {									\
 	struct usb_interface *intf = to_usb_interface(dev);		\
 	struct usb_led *led = usb_get_intfdata(intf);			\
 									\
 	return sprintf(buf, "%d\n", led->value);			\
 }									\
-static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)	\
+static ssize_t set_##value(struct device *dev, struct device_attribute *attr,\
+			   const char *buf, size_t count)		\
 {									\
 	struct usb_interface *intf = to_usb_interface(dev);		\
 	struct usb_led *led = usb_get_intfdata(intf);			\
@@ -135,7 +137,8 @@ show_set(blue);
 show_set(red);
 show_set(green);
 
-static int led_probe(struct usb_interface *interface, const struct usb_device_id *id)
+static int led_probe(struct usb_interface *interface,
+		     const struct usb_device_id *id)
 {
 	struct usb_device *udev = interface_to_usbdev(interface);
 	struct usb_led *dev = NULL;
@@ -150,7 +153,7 @@ static int led_probe(struct usb_interface *interface, const struct usb_device_id
 	dev->udev = usb_get_dev(udev);
 	dev->type = id->driver_info;
 
-	usb_set_intfdata (interface, dev);
+	usb_set_intfdata(interface, dev);
 
 	retval = device_create_file(&interface->dev, &dev_attr_blue);
 	if (retval)
@@ -194,7 +197,7 @@ error:
 	device_remove_file(&interface->dev, &dev_attr_blue);
 	device_remove_file(&interface->dev, &dev_attr_red);
 	device_remove_file(&interface->dev, &dev_attr_green);
-	usb_set_intfdata (interface, NULL);
+	usb_set_intfdata(interface, NULL);
 	usb_put_dev(dev->udev);
 	kfree(dev);
 error_mem:
@@ -205,14 +208,14 @@ static void led_disconnect(struct usb_interface *interface)
 {
 	struct usb_led *dev;
 
-	dev = usb_get_intfdata (interface);
+	dev = usb_get_intfdata(interface);
 
 	device_remove_file(&interface->dev, &dev_attr_blue);
 	device_remove_file(&interface->dev, &dev_attr_red);
 	device_remove_file(&interface->dev, &dev_attr_green);
 
 	/* first remove the files, then set the pointer to NULL */
-	usb_set_intfdata (interface, NULL);
+	usb_set_intfdata(interface, NULL);
 
 	usb_put_dev(dev->udev);
 
@@ -243,8 +246,8 @@ static void __exit usb_led_exit(void)
 	usb_deregister(&led_driver);
 }
 
-module_init (usb_led_init);
-module_exit (usb_led_exit);
+module_init(usb_led_init);
+module_exit(usb_led_exit);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index bb10846..bd6d008 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -359,8 +359,10 @@ static int simple_io(
 	urb->context = &completion;
 	while (retval == 0 && iterations-- > 0) {
 		init_completion(&completion);
-		if (usb_pipeout(urb->pipe))
+		if (usb_pipeout(urb->pipe)) {
 			simple_fill_buf(urb);
+			urb->transfer_flags |= URB_ZERO_PACKET;
+		}
 		retval = usb_submit_urb(urb, GFP_KERNEL);
 		if (retval != 0)
 			break;
@@ -1583,8 +1585,8 @@ static struct urb *iso_alloc_urb(
 
 	if (bytes < 0 || !desc)
 		return NULL;
-	maxp = 0x7ff & le16_to_cpu(desc->wMaxPacketSize);
-	maxp *= 1 + (0x3 & (le16_to_cpu(desc->wMaxPacketSize) >> 11));
+	maxp = 0x7ff & usb_endpoint_maxp(desc);
+	maxp *= 1 + (0x3 & (usb_endpoint_maxp(desc) >> 11));
 	packets = DIV_ROUND_UP(bytes, maxp);
 
 	urb = usb_alloc_urb(packets, GFP_KERNEL);
@@ -1654,7 +1656,7 @@ test_iso_queue(struct usbtest_dev *dev, struct usbtest_param *param,
 		"... iso period %d %sframes, wMaxPacket %04x\n",
 		1 << (desc->bInterval - 1),
 		(udev->speed == USB_SPEED_HIGH) ? "micro" : "",
-		le16_to_cpu(desc->wMaxPacketSize));
+		usb_endpoint_maxp(desc));
 
 	for (i = 0; i < param->sglen; i++) {
 		urbs[i] = iso_alloc_urb(udev, pipe, desc,
@@ -2298,25 +2300,8 @@ usbtest_probe(struct usb_interface *intf, const struct usb_device_id *id)
 
 	usb_set_intfdata(intf, dev);
 	dev_info(&intf->dev, "%s\n", info->name);
-	dev_info(&intf->dev, "%s speed {control%s%s%s%s%s} tests%s\n",
-			({ char *tmp;
-			switch (udev->speed) {
-			case USB_SPEED_LOW:
-				tmp = "low";
-				break;
-			case USB_SPEED_FULL:
-				tmp = "full";
-				break;
-			case USB_SPEED_HIGH:
-				tmp = "high";
-				break;
-			case USB_SPEED_SUPER:
-				tmp = "super";
-				break;
-			default:
-				tmp = "unknown";
-				break;
-			}; tmp; }),
+	dev_info(&intf->dev, "%s {control%s%s%s%s%s} tests%s\n",
+			usb_speed_string(udev->speed),
 			info->ctrl_out ? " in/out" : "",
 			rtest, wtest,
 			irtest, iwtest,
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index a09dbd2..a04b2ff 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -1101,7 +1101,7 @@ static long mon_bin_ioctl(struct file *file, unsigned int cmd, unsigned long arg
 		nevents = mon_bin_queued(rp);
 
 		sp = (struct mon_bin_stats __user *)arg;
-		if (put_user(rp->cnt_lost, &sp->dropped))
+		if (put_user(ndropped, &sp->dropped))
 			return -EFAULT;
 		if (put_user(nevents, &sp->queued))
 			return -EFAULT;
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index fe8d14c..ae4a20a 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -634,6 +634,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 	u16			len;
 	u16			csr = musb_readw(epio, MUSB_RXCSR);
 	struct musb_hw_ep	*hw_ep = &musb->endpoints[epnum];
+	u8			use_mode_1;
 
 	if (hw_ep->is_shared_fifo)
 		musb_ep = &hw_ep->ep_in;
@@ -683,6 +684,18 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 
 	if (csr & MUSB_RXCSR_RXPKTRDY) {
 		len = musb_readw(epio, MUSB_RXCOUNT);
+
+		/*
+		 * Enable Mode 1 on RX transfers only when short_not_ok flag
+		 * is set. Currently short_not_ok flag is set only from
+		 * file_storage and f_mass_storage drivers
+		 */
+
+		if (request->short_not_ok && len == musb_ep->packet_sz)
+			use_mode_1 = 1;
+		else
+			use_mode_1 = 0;
+
 		if (request->actual < request->length) {
 #ifdef CONFIG_USB_INVENTRA_DMA
 			if (is_buffer_mapped(req)) {
@@ -714,37 +727,41 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 	 * then becomes usable as a runtime "use mode 1" hint...
 	 */
 
-				csr |= MUSB_RXCSR_DMAENAB;
-#ifdef USE_MODE1
-				csr |= MUSB_RXCSR_AUTOCLEAR;
-				/* csr |= MUSB_RXCSR_DMAMODE; */
-
-				/* this special sequence (enabling and then
-				 * disabling MUSB_RXCSR_DMAMODE) is required
-				 * to get DMAReq to activate
-				 */
-				musb_writew(epio, MUSB_RXCSR,
-					csr | MUSB_RXCSR_DMAMODE);
-#else
-				if (!musb_ep->hb_mult &&
-					musb_ep->hw_ep->rx_double_buffered)
+				/* Experimental: Mode1 works with mass storage use cases */
+				if (use_mode_1) {
 					csr |= MUSB_RXCSR_AUTOCLEAR;
-#endif
-				musb_writew(epio, MUSB_RXCSR, csr);
+					musb_writew(epio, MUSB_RXCSR, csr);
+					csr |= MUSB_RXCSR_DMAENAB;
+					musb_writew(epio, MUSB_RXCSR, csr);
+
+					/*
+					 * this special sequence (enabling and then
+					 * disabling MUSB_RXCSR_DMAMODE) is required
+					 * to get DMAReq to activate
+					 */
+					musb_writew(epio, MUSB_RXCSR,
+						csr | MUSB_RXCSR_DMAMODE);
+					musb_writew(epio, MUSB_RXCSR, csr);
+
+				} else {
+					if (!musb_ep->hb_mult &&
+						musb_ep->hw_ep->rx_double_buffered)
+						csr |= MUSB_RXCSR_AUTOCLEAR;
+					csr |= MUSB_RXCSR_DMAENAB;
+					musb_writew(epio, MUSB_RXCSR, csr);
+				}
 
 				if (request->actual < request->length) {
 					int transfer_size = 0;
-#ifdef USE_MODE1
-					transfer_size = min(request->length - request->actual,
-							channel->max_len);
-#else
-					transfer_size = min(request->length - request->actual,
-							(unsigned)len);
-#endif
-					if (transfer_size <= musb_ep->packet_sz)
-						musb_ep->dma->desired_mode = 0;
-					else
+					if (use_mode_1) {
+						transfer_size = min(request->length - request->actual,
+								channel->max_len);
 						musb_ep->dma->desired_mode = 1;
+					} else {
+						transfer_size = min(request->length - request->actual,
+								(unsigned)len);
+						musb_ep->dma->desired_mode = 0;
+					}
 
 					use_dma = c->channel_program(
 							channel,
@@ -1020,7 +1037,7 @@ static int musb_gadget_enable(struct usb_ep *ep,
 		goto fail;
 
 	/* REVISIT this rules out high bandwidth periodic transfers */
-	tmp = le16_to_cpu(desc->wMaxPacketSize);
+	tmp = usb_endpoint_maxp(desc);
 	if (tmp & ~0x07ff) {
 		int ok;
 
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 9378b35..6a0d046 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -679,6 +679,14 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb)
 			musb_readb(mbase, MUSB_FADDR),
 			decode_ep0stage(musb->ep0_state));
 
+	if (csr & MUSB_CSR0_P_DATAEND) {
+		/*
+		 * If DATAEND is set we should not call the callback,
+		 * hence the status stage is not complete.
+		 */
+		return IRQ_HANDLED;
+	}
+
 	/* I sent a stall.. need to acknowledge it now.. */
 	if (csr & MUSB_CSR0_P_SENTSTALL) {
 		musb_writew(regs, MUSB_CSR0,
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 8b2473f..60ddba8 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1932,7 +1932,7 @@ static int musb_urb_enqueue(
 	INIT_LIST_HEAD(&qh->ring);
 	qh->is_ready = 1;
 
-	qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize);
+	qh->maxpacket = usb_endpoint_maxp(epd);
 	qh->type = usb_endpoint_type(epd);
 
 	/* Bits 11 & 12 of wMaxPacketSize encode high bandwidth multiplier.
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index f70c5a5..57a6085 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -408,7 +408,7 @@ dma_controller_create(struct musb *musb, void __iomem *base)
 	controller->controller.channel_program = dma_channel_program;
 	controller->controller.channel_abort = dma_channel_abort;
 
-	if (request_irq(irq, dma_controller_irq, IRQF_DISABLED,
+	if (request_irq(irq, dma_controller_irq, 0,
 			dev_name(musb->controller), &controller->controller)) {
 		dev_err(dev, "request_irq %d failed!\n", irq);
 		dma_controller_destroy(&controller->controller);
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index ca9b690..8c86787 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -899,7 +899,7 @@ static int otg_bind(struct isp1301 *isp)
 
 	if (otg_dev)
 		status = request_irq(otg_dev->resource[1].start, omap_otg_irq,
-				IRQF_DISABLED, DRIVER_NAME, isp);
+				0, DRIVER_NAME, isp);
 	else
 		status = -ENODEV;
 
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
index b4d2c09..ed2b26c 100644
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -137,22 +137,6 @@ static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address)
 	return ret;
 }
 
-/*-------------------------------------------------------------------------*/
-static int twl6030_set_phy_clk(struct otg_transceiver *x, int on)
-{
-	struct twl6030_usb *twl;
-	struct device *dev;
-	struct twl4030_usb_data *pdata;
-
-	twl = xceiv_to_twl(x);
-	dev  = twl->dev;
-	pdata = dev->platform_data;
-
-	pdata->phy_set_clock(twl->dev, on);
-
-	return 0;
-}
-
 static int twl6030_phy_init(struct otg_transceiver *x)
 {
 	struct twl6030_usb *twl;
diff --git a/drivers/usb/renesas_usbhs/Kconfig b/drivers/usb/renesas_usbhs/Kconfig
index 286cbf1..6f4afa4 100644
--- a/drivers/usb/renesas_usbhs/Kconfig
+++ b/drivers/usb/renesas_usbhs/Kconfig
@@ -4,7 +4,7 @@
 
 config USB_RENESAS_USBHS
 	tristate 'Renesas USBHS controller'
-	depends on SUPERH || ARCH_SHMOBILE
+	depends on USB && USB_GADGET
 	default n
 	help
 	  Renesas USBHS is a discrete USB host and peripheral controller chip
diff --git a/drivers/usb/renesas_usbhs/Makefile b/drivers/usb/renesas_usbhs/Makefile
index ce08345..bc8aef4 100644
--- a/drivers/usb/renesas_usbhs/Makefile
+++ b/drivers/usb/renesas_usbhs/Makefile
@@ -6,4 +6,10 @@ obj-$(CONFIG_USB_RENESAS_USBHS)	+= renesas_usbhs.o
 
 renesas_usbhs-y			:= common.o mod.o pipe.o fifo.o
 
-renesas_usbhs-$(CONFIG_USB_RENESAS_USBHS_UDC)	+= mod_gadget.o
+ifneq ($(CONFIG_USB_RENESAS_USBHS_HCD),)
+	renesas_usbhs-y		+= mod_host.o
+endif
+
+ifneq ($(CONFIG_USB_RENESAS_USBHS_UDC),)
+	renesas_usbhs-y		+= mod_gadget.o
+endif
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index d8239e5..d2e2efa 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -61,8 +61,8 @@
  */
 #define usbhs_platform_call(priv, func, args...)\
 	(!(priv) ? -ENODEV :			\
-	 !((priv)->pfunc->func) ? 0 :		\
-	 (priv)->pfunc->func(args))
+	 !((priv)->pfunc.func) ? 0 :		\
+	 (priv)->pfunc.func(args))
 
 /*
  *		common functions
@@ -114,6 +114,10 @@ void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable)
 {
 	u16 mask = DCFM | DRPD | DPRPU;
 	u16 val  = DCFM | DRPD;
+	int has_otg = usbhs_get_dparam(priv, has_otg);
+
+	if (has_otg)
+		usbhs_bset(priv, DVSTCTR, (EXTLP | PWEN), (EXTLP | PWEN));
 
 	/*
 	 * if enable
@@ -147,19 +151,133 @@ int usbhs_frame_get_num(struct usbhs_priv *priv)
 }
 
 /*
+ *		usb request functions
+ */
+void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
+{
+	u16 val;
+
+	val = usbhs_read(priv, USBREQ);
+	req->bRequest		= (val >> 8) & 0xFF;
+	req->bRequestType	= (val >> 0) & 0xFF;
+
+	req->wValue	= usbhs_read(priv, USBVAL);
+	req->wIndex	= usbhs_read(priv, USBINDX);
+	req->wLength	= usbhs_read(priv, USBLENG);
+}
+
+void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
+{
+	usbhs_write(priv, USBREQ,  (req->bRequest << 8) | req->bRequestType);
+	usbhs_write(priv, USBVAL,  req->wValue);
+	usbhs_write(priv, USBINDX, req->wIndex);
+	usbhs_write(priv, USBLENG, req->wLength);
+
+	usbhs_bset(priv, DCPCTR, SUREQ, SUREQ);
+}
+
+/*
+ *		bus/vbus functions
+ */
+void usbhs_bus_send_sof_enable(struct usbhs_priv *priv)
+{
+	u16 status = usbhs_read(priv, DVSTCTR) & (USBRST | UACT);
+
+	if (status != USBRST) {
+		struct device *dev = usbhs_priv_to_dev(priv);
+		dev_err(dev, "usbhs should be reset\n");
+	}
+
+	usbhs_bset(priv, DVSTCTR, (USBRST | UACT), UACT);
+}
+
+void usbhs_bus_send_reset(struct usbhs_priv *priv)
+{
+	usbhs_bset(priv, DVSTCTR, (USBRST | UACT), USBRST);
+}
+
+int usbhs_bus_get_speed(struct usbhs_priv *priv)
+{
+	u16 dvstctr = usbhs_read(priv, DVSTCTR);
+
+	switch (RHST & dvstctr) {
+	case RHST_LOW_SPEED:
+		return USB_SPEED_LOW;
+	case RHST_FULL_SPEED:
+		return USB_SPEED_FULL;
+	case RHST_HIGH_SPEED:
+		return USB_SPEED_HIGH;
+	}
+
+	return USB_SPEED_UNKNOWN;
+}
+
+int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable)
+{
+	struct platform_device *pdev = usbhs_priv_to_pdev(priv);
+
+	return usbhs_platform_call(priv, set_vbus, pdev, enable);
+}
+
+static void usbhsc_bus_init(struct usbhs_priv *priv)
+{
+	usbhs_write(priv, DVSTCTR, 0);
+
+	usbhs_vbus_ctrl(priv, 0);
+}
+
+/*
+ *		device configuration
+ */
+int usbhs_set_device_speed(struct usbhs_priv *priv, int devnum,
+			   u16 upphub, u16 hubport, u16 speed)
+{
+	struct device *dev = usbhs_priv_to_dev(priv);
+	u16 usbspd = 0;
+	u32 reg = DEVADD0 + (2 * devnum);
+
+	if (devnum > 10) {
+		dev_err(dev, "cannot set speed to unknown device %d\n", devnum);
+		return -EIO;
+	}
+
+	if (upphub > 0xA) {
+		dev_err(dev, "unsupported hub number %d\n", upphub);
+		return -EIO;
+	}
+
+	switch (speed) {
+	case USB_SPEED_LOW:
+		usbspd = USBSPD_SPEED_LOW;
+		break;
+	case USB_SPEED_FULL:
+		usbspd = USBSPD_SPEED_FULL;
+		break;
+	case USB_SPEED_HIGH:
+		usbspd = USBSPD_SPEED_HIGH;
+		break;
+	default:
+		dev_err(dev, "unsupported speed %d\n", speed);
+		return -EIO;
+	}
+
+	usbhs_write(priv, reg,	UPPHUB(upphub)	|
+				HUBPORT(hubport)|
+				USBSPD(usbspd));
+
+	return 0;
+}
+
+/*
  *		local functions
  */
-static void usbhsc_bus_ctrl(struct usbhs_priv *priv, int enable)
+static void usbhsc_set_buswait(struct usbhs_priv *priv)
 {
 	int wait = usbhs_get_dparam(priv, buswait_bwait);
-	u16 data = 0;
 
-	if (enable) {
-		/* set bus wait if platform have */
-		if (wait)
-			usbhs_bset(priv, BUSWAIT, 0x000F, wait);
-	}
-	usbhs_write(priv, DVSTCTR, data);
+	/* set bus wait if platform have */
+	if (wait)
+		usbhs_bset(priv, BUSWAIT, 0x000F, wait);
 }
 
 /*
@@ -191,10 +309,8 @@ static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable)
 
 		/* USB on */
 		usbhs_sys_clock_ctrl(priv, enable);
-		usbhsc_bus_ctrl(priv, enable);
 	} else {
 		/* USB off */
-		usbhsc_bus_ctrl(priv, enable);
 		usbhs_sys_clock_ctrl(priv, enable);
 
 		/* disable PM */
@@ -203,13 +319,10 @@ static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable)
 }
 
 /*
- *		notify hotplug
+ *		hotplug
  */
-static void usbhsc_notify_hotplug(struct work_struct *work)
+static void usbhsc_hotplug(struct usbhs_priv *priv)
 {
-	struct usbhs_priv *priv = container_of(work,
-					       struct usbhs_priv,
-					       notify_hotplug_work.work);
 	struct platform_device *pdev = usbhs_priv_to_pdev(priv);
 	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
 	int id;
@@ -237,6 +350,10 @@ static void usbhsc_notify_hotplug(struct work_struct *work)
 		if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
 			usbhsc_power_ctrl(priv, enable);
 
+		/* bus init */
+		usbhsc_set_buswait(priv);
+		usbhsc_bus_init(priv);
+
 		/* module start */
 		usbhs_mod_call(priv, start, priv);
 
@@ -246,6 +363,9 @@ static void usbhsc_notify_hotplug(struct work_struct *work)
 		/* module stop */
 		usbhs_mod_call(priv, stop, priv);
 
+		/* bus init */
+		usbhsc_bus_init(priv);
+
 		/* power off */
 		if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
 			usbhsc_power_ctrl(priv, enable);
@@ -257,6 +377,17 @@ static void usbhsc_notify_hotplug(struct work_struct *work)
 	}
 }
 
+/*
+ *		notify hotplug
+ */
+static void usbhsc_notify_hotplug(struct work_struct *work)
+{
+	struct usbhs_priv *priv = container_of(work,
+					       struct usbhs_priv,
+					       notify_hotplug_work.work);
+	usbhsc_hotplug(priv);
+}
+
 int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev)
 {
 	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
@@ -315,24 +446,28 @@ static int __devinit usbhs_probe(struct platform_device *pdev)
 	/*
 	 * care platform info
 	 */
-	priv->pfunc	= &info->platform_callback;
-	priv->dparam	= &info->driver_param;
+	memcpy(&priv->pfunc,
+	       &info->platform_callback,
+	       sizeof(struct renesas_usbhs_platform_callback));
+	memcpy(&priv->dparam,
+	       &info->driver_param,
+	       sizeof(struct renesas_usbhs_driver_param));
 
 	/* set driver callback functions for platform */
 	dfunc			= &info->driver_callback;
 	dfunc->notify_hotplug	= usbhsc_drvcllbck_notify_hotplug;
 
 	/* set default param if platform doesn't have */
-	if (!priv->dparam->pipe_type) {
-		priv->dparam->pipe_type = usbhsc_default_pipe_type;
-		priv->dparam->pipe_size = ARRAY_SIZE(usbhsc_default_pipe_type);
+	if (!priv->dparam.pipe_type) {
+		priv->dparam.pipe_type = usbhsc_default_pipe_type;
+		priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe_type);
 	}
-	if (!priv->dparam->pio_dma_border)
-		priv->dparam->pio_dma_border = 64; /* 64byte */
+	if (!priv->dparam.pio_dma_border)
+		priv->dparam.pio_dma_border = 64; /* 64byte */
 
 	/* FIXME */
 	/* runtime power control ? */
-	if (priv->pfunc->get_vbus)
+	if (priv->pfunc.get_vbus)
 		usbhsc_flags_set(priv, USBHSF_RUNTIME_PWCTRL);
 
 	/*
@@ -443,9 +578,60 @@ static int __devexit usbhs_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int usbhsc_suspend(struct device *dev)
+{
+	struct usbhs_priv *priv = dev_get_drvdata(dev);
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
+
+	if (mod) {
+		usbhs_mod_call(priv, stop, priv);
+		usbhs_mod_change(priv, -1);
+	}
+
+	if (mod || !usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
+		usbhsc_power_ctrl(priv, 0);
+
+	return 0;
+}
+
+static int usbhsc_resume(struct device *dev)
+{
+	struct usbhs_priv *priv = dev_get_drvdata(dev);
+	struct platform_device *pdev = usbhs_priv_to_pdev(priv);
+
+	usbhs_platform_call(priv, phy_reset, pdev);
+
+	if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
+		usbhsc_power_ctrl(priv, 1);
+
+	usbhsc_hotplug(priv);
+
+	return 0;
+}
+
+static int usbhsc_runtime_nop(struct device *dev)
+{
+	/* Runtime PM callback shared between ->runtime_suspend()
+	 * and ->runtime_resume(). Simply returns success.
+	 *
+	 * This driver re-initializes all registers after
+	 * pm_runtime_get_sync() anyway so there is no need
+	 * to save and restore registers here.
+	 */
+	return 0;
+}
+
+static const struct dev_pm_ops usbhsc_pm_ops = {
+	.suspend		= usbhsc_suspend,
+	.resume			= usbhsc_resume,
+	.runtime_suspend	= usbhsc_runtime_nop,
+	.runtime_resume		= usbhsc_runtime_nop,
+};
+
 static struct platform_driver renesas_usbhs_driver = {
 	.driver		= {
 		.name	= "renesas_usbhs",
+		.pm	= &usbhsc_pm_ops,
 	},
 	.probe		= usbhs_probe,
 	.remove		= __devexit_p(usbhs_remove),
diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h
index b410463..8729da5 100644
--- a/drivers/usb/renesas_usbhs/common.h
+++ b/drivers/usb/renesas_usbhs/common.h
@@ -90,6 +90,17 @@ struct usbhs_priv;
 #define PIPE9TRN	0x00BA
 #define PIPEATRE	0x00BC
 #define PIPEATRN	0x00BE
+#define DEVADD0		0x00D0 /* Device address n configuration */
+#define DEVADD1		0x00D2
+#define DEVADD2		0x00D4
+#define DEVADD3		0x00D6
+#define DEVADD4		0x00D8
+#define DEVADD5		0x00DA
+#define DEVADD6		0x00DC
+#define DEVADD7		0x00DE
+#define DEVADD8		0x00E0
+#define DEVADD9		0x00E2
+#define DEVADDA		0x00E4
 
 /* SYSCFG */
 #define SCKE	(1 << 10)	/* USB Module Clock Enable */
@@ -102,6 +113,8 @@ struct usbhs_priv;
 /* DVSTCTR */
 #define EXTLP	(1 << 10)	/* Controls the EXTLP pin output state */
 #define PWEN	(1 << 9)	/* Controls the PWEN pin output state */
+#define USBRST	(1 << 6)	/* Bus Reset Output */
+#define UACT	(1 << 4)	/* USB Bus Enable */
 #define RHST	(0x7)		/* Reset Handshake */
 #define  RHST_LOW_SPEED  1	/* Low-speed connection */
 #define  RHST_FULL_SPEED 2	/* Full-speed connection */
@@ -159,6 +172,15 @@ struct usbhs_priv;
 #define  NODATA_STATUS_STAGE	5	/* Control write NoData status stage */
 #define  SEQUENCE_ERROR		6	/* Control transfer sequence error */
 
+/* INTSTS1 */
+#define OVRCR	(1 << 15) /* OVRCR Interrupt Status */
+#define BCHG	(1 << 14) /* USB Bus Change Interrupt Status */
+#define DTCH	(1 << 12) /* USB Disconnection Detect Interrupt Status */
+#define ATTCH	(1 << 11) /* ATTCH Interrupt Status */
+#define EOFERR	(1 << 6)  /* EOF Error Detect Interrupt Status */
+#define SIGN	(1 << 5)  /* Setup Transaction Error Interrupt Status */
+#define SACK	(1 << 4)  /* Setup Transaction ACK Response Interrupt Status */
+
 /* PIPECFG */
 /* DCPCFG */
 #define TYPE_NONE	(0 << 14)	/* Transfer Type */
@@ -183,9 +205,11 @@ struct usbhs_priv;
 /* PIPEnCTR */
 /* DCPCTR */
 #define BSTS		(1 << 15)	/* Buffer Status */
+#define SUREQ		(1 << 14)	/* Sending SETUP Token */
 #define CSSTS		(1 << 12)	/* CSSTS Status */
-#define SQCLR		(1 << 8)	/* Toggle Bit Clear */
 #define	ACLRM		(1 << 9)	/* Buffer Auto-Clear Mode */
+#define SQCLR		(1 << 8)	/* Toggle Bit Clear */
+#define SQSET		(1 << 7)	/* Toggle Bit Set */
 #define PBUSY		(1 << 5)	/* Pipe Busy */
 #define PID_MASK	(0x3)		/* Response PID */
 #define  PID_NAK	0
@@ -202,6 +226,14 @@ struct usbhs_priv;
 /* FRMNUM */
 #define FRNM_MASK	(0x7FF)
 
+/* DEVADDn */
+#define UPPHUB(x)	(((x) & 0xF) << 11)	/* HUB Register */
+#define HUBPORT(x)	(((x) & 0x7) << 8)	/* HUB Port for Target Device */
+#define USBSPD(x)	(((x) & 0x3) << 6)	/* Device Transfer Rate */
+#define USBSPD_SPEED_LOW	0x1
+#define USBSPD_SPEED_FULL	0x2
+#define USBSPD_SPEED_HIGH	0x3
+
 /*
  *		struct
  */
@@ -210,8 +242,8 @@ struct usbhs_priv {
 	void __iomem *base;
 	unsigned int irq;
 
-	struct renesas_usbhs_platform_callback	*pfunc;
-	struct renesas_usbhs_driver_param	*dparam;
+	struct renesas_usbhs_platform_callback	pfunc;
+	struct renesas_usbhs_driver_param	dparam;
 
 	struct delayed_work notify_hotplug_work;
 	struct platform_device *pdev;
@@ -258,15 +290,35 @@ void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable);
 void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable);
 
 /*
+ * usb request
+ */
+void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req);
+void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req);
+
+/*
+ * bus
+ */
+void usbhs_bus_send_sof_enable(struct usbhs_priv *priv);
+void usbhs_bus_send_reset(struct usbhs_priv *priv);
+int usbhs_bus_get_speed(struct usbhs_priv *priv);
+int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable);
+
+/*
  * frame
  */
 int usbhs_frame_get_num(struct usbhs_priv *priv);
 
 /*
+ * device config
+ */
+int usbhs_set_device_speed(struct usbhs_priv *priv, int devnum, u16 upphub,
+			   u16 hubport, u16 speed);
+
+/*
  * data
  */
 struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev);
-#define usbhs_get_dparam(priv, param)	(priv->dparam->param)
+#define usbhs_get_dparam(priv, param)	(priv->dparam.param)
 #define usbhs_priv_to_pdev(priv)	(priv->pdev)
 #define usbhs_priv_to_dev(priv)		(&priv->pdev->dev)
 #define usbhs_priv_to_lock(priv)	(&priv->lock)
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index a34430f..8da685e 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -54,35 +54,45 @@ static struct usbhs_pkt_handle usbhsf_null_handler = {
 };
 
 void usbhs_pkt_push(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt,
-		    struct usbhs_pkt_handle *handler,
+		    void (*done)(struct usbhs_priv *priv,
+				 struct usbhs_pkt *pkt),
 		    void *buf, int len, int zero)
 {
 	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
 	struct device *dev = usbhs_priv_to_dev(priv);
 	unsigned long flags;
 
+	if (!done) {
+		dev_err(dev, "no done function\n");
+		return;
+	}
+
 	/********************  spin lock ********************/
 	usbhs_lock(priv, flags);
 
-	if (!handler) {
+	if (!pipe->handler) {
 		dev_err(dev, "no handler function\n");
-		handler = &usbhsf_null_handler;
+		pipe->handler = &usbhsf_null_handler;
 	}
 
 	list_del_init(&pkt->node);
 	list_add_tail(&pkt->node, &pipe->list);
 
+	/*
+	 * each pkt must hold own handler.
+	 * because handler might be changed by its situation.
+	 * dma handler -> pio handler.
+	 */
 	pkt->pipe	= pipe;
 	pkt->buf	= buf;
-	pkt->handler	= handler;
+	pkt->handler	= pipe->handler;
 	pkt->length	= len;
 	pkt->zero	= zero;
 	pkt->actual	= 0;
+	pkt->done	= done;
 
 	usbhs_unlock(priv, flags);
 	/********************  spin unlock ******************/
-
-	usbhs_pkt_start(pipe);
 }
 
 static void __usbhsf_pkt_del(struct usbhs_pkt *pkt)
@@ -118,10 +128,15 @@ struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt)
 	return pkt;
 }
 
-int __usbhs_pkt_handler(struct usbhs_pipe *pipe, int type)
+enum {
+	USBHSF_PKT_PREPARE,
+	USBHSF_PKT_TRY_RUN,
+	USBHSF_PKT_DMA_DONE,
+};
+
+static int usbhsf_pkt_handler(struct usbhs_pipe *pipe, int type)
 {
 	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
-	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
 	struct usbhs_pkt *pkt;
 	struct device *dev = usbhs_priv_to_dev(priv);
 	int (*func)(struct usbhs_pkt *pkt, int *is_done);
@@ -161,13 +176,18 @@ __usbhs_pkt_handler_end:
 	/********************  spin unlock ******************/
 
 	if (is_done) {
-		info->done(pkt);
+		pkt->done(priv, pkt);
 		usbhs_pkt_start(pipe);
 	}
 
 	return ret;
 }
 
+void usbhs_pkt_start(struct usbhs_pipe *pipe)
+{
+	usbhsf_pkt_handler(pipe, USBHSF_PKT_PREPARE);
+}
+
 /*
  *		irq enable/disable function
  */
@@ -276,9 +296,13 @@ static int usbhsf_fifo_select(struct usbhs_pipe *pipe,
 	    usbhsf_fifo_is_busy(fifo))
 		return -EBUSY;
 
-	if (usbhs_pipe_is_dcp(pipe))
+	if (usbhs_pipe_is_dcp(pipe)) {
 		base |= (1 == write) << 5;	/* ISEL */
 
+		if (usbhs_mod_is_host(priv))
+			usbhs_dcp_dir_for_host(pipe, write);
+	}
+
 	/* "base" will be used below  */
 	usbhs_write(priv, fifo->sel, base | MBW_32);
 
@@ -297,6 +321,151 @@ static int usbhsf_fifo_select(struct usbhs_pipe *pipe,
 }
 
 /*
+ *		DCP status stage
+ */
+static int usbhs_dcp_dir_switch_to_write(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int ret;
+
+	usbhs_pipe_disable(pipe);
+
+	ret = usbhsf_fifo_select(pipe, fifo, 1);
+	if (ret < 0) {
+		dev_err(dev, "%s() faile\n", __func__);
+		return ret;
+	}
+
+	usbhs_pipe_sequence_data1(pipe); /* DATA1 */
+
+	usbhsf_fifo_clear(pipe, fifo);
+	usbhsf_send_terminator(pipe, fifo);
+
+	usbhsf_fifo_unselect(pipe, fifo);
+
+	usbhsf_tx_irq_ctrl(pipe, 1);
+	usbhs_pipe_enable(pipe);
+
+	return ret;
+}
+
+static int usbhs_dcp_dir_switch_to_read(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int ret;
+
+	usbhs_pipe_disable(pipe);
+
+	ret = usbhsf_fifo_select(pipe, fifo, 0);
+	if (ret < 0) {
+		dev_err(dev, "%s() fail\n", __func__);
+		return ret;
+	}
+
+	usbhs_pipe_sequence_data1(pipe); /* DATA1 */
+	usbhsf_fifo_clear(pipe, fifo);
+
+	usbhsf_fifo_unselect(pipe, fifo);
+
+	usbhsf_rx_irq_ctrl(pipe, 1);
+	usbhs_pipe_enable(pipe);
+
+	return ret;
+
+}
+
+static int usbhs_dcp_dir_switch_done(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+
+	if (pkt->handler == &usbhs_dcp_status_stage_in_handler)
+		usbhsf_tx_irq_ctrl(pipe, 0);
+	else
+		usbhsf_rx_irq_ctrl(pipe, 0);
+
+	pkt->actual = pkt->length;
+	*is_done = 1;
+
+	return 0;
+}
+
+struct usbhs_pkt_handle usbhs_dcp_status_stage_in_handler = {
+	.prepare = usbhs_dcp_dir_switch_to_write,
+	.try_run = usbhs_dcp_dir_switch_done,
+};
+
+struct usbhs_pkt_handle usbhs_dcp_status_stage_out_handler = {
+	.prepare = usbhs_dcp_dir_switch_to_read,
+	.try_run = usbhs_dcp_dir_switch_done,
+};
+
+/*
+ *		DCP data stage (push)
+ */
+static int usbhsf_dcp_data_stage_try_push(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+
+	usbhs_pipe_sequence_data1(pipe); /* DATA1 */
+
+	/*
+	 * change handler to PIO push
+	 */
+	pkt->handler = &usbhs_fifo_pio_push_handler;
+
+	return pkt->handler->prepare(pkt, is_done);
+}
+
+struct usbhs_pkt_handle usbhs_dcp_data_stage_out_handler = {
+	.prepare = usbhsf_dcp_data_stage_try_push,
+};
+
+/*
+ *		DCP data stage (pop)
+ */
+static int usbhsf_dcp_data_stage_prepare_pop(struct usbhs_pkt *pkt,
+					     int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv);
+
+	if (usbhs_pipe_is_busy(pipe))
+		return 0;
+
+	/*
+	 * prepare pop for DCP should
+	 *  - change DCP direction,
+	 *  - clear fifo
+	 *  - DATA1
+	 */
+	usbhs_pipe_disable(pipe);
+
+	usbhs_pipe_sequence_data1(pipe); /* DATA1 */
+
+	usbhsf_fifo_select(pipe, fifo, 0);
+	usbhsf_fifo_clear(pipe, fifo);
+	usbhsf_fifo_unselect(pipe, fifo);
+
+	/*
+	 * change handler to PIO pop
+	 */
+	pkt->handler = &usbhs_fifo_pio_pop_handler;
+
+	return pkt->handler->prepare(pkt, is_done);
+}
+
+struct usbhs_pkt_handle usbhs_dcp_data_stage_in_handler = {
+	.prepare = usbhsf_dcp_data_stage_prepare_pop,
+};
+
+/*
  *		PIO push handler
  */
 static int usbhsf_pio_try_push(struct usbhs_pkt *pkt, int *is_done)
@@ -452,6 +621,20 @@ static int usbhsf_pio_try_pop(struct usbhs_pkt *pkt, int *is_done)
 	total_len	= len;
 
 	/*
+	 * update actual length first here to decide disable pipe.
+	 * if this pipe keeps BUF status and all data were popped,
+	 * then, next interrupt/token will be issued again
+	 */
+	pkt->actual += total_len;
+
+	if ((pkt->actual == pkt->length) ||	/* receive all data */
+	    (total_len < maxp)) {		/* short packet */
+		*is_done = 1;
+		usbhsf_rx_irq_ctrl(pipe, 0);
+		usbhs_pipe_disable(pipe);	/* disable pipe first */
+	}
+
+	/*
 	 * Buffer clear if Zero-Length packet
 	 *
 	 * see
@@ -481,16 +664,7 @@ static int usbhsf_pio_try_pop(struct usbhs_pkt *pkt, int *is_done)
 		buf[i] = (data >> ((i & 0x03) * 8)) & 0xff;
 	}
 
-	pkt->actual += total_len;
-
 usbhs_fifo_read_end:
-	if ((pkt->actual == pkt->length) ||	/* receive all data */
-	    (total_len < maxp)) {		/* short packet */
-		*is_done = 1;
-		usbhsf_rx_irq_ctrl(pipe, 0);
-		usbhs_pipe_disable(pipe);
-	}
-
 	dev_dbg(dev, "  recv %d (%d/ %d/ %d/ %d)\n",
 		usbhs_pipe_number(pipe),
 		pkt->length, pkt->actual, *is_done, pkt->zero);
@@ -646,7 +820,7 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done)
 	if (len % 4) /* 32bit alignment */
 		goto usbhsf_pio_prepare_push;
 
-	if (((u32)pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
+	if ((*(u32 *) pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
 		goto usbhsf_pio_prepare_push;
 
 	/* get enable DMA fifo */
@@ -723,7 +897,7 @@ static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done)
 	if (!fifo)
 		goto usbhsf_pio_prepare_pop;
 
-	if (((u32)pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
+	if ((*(u32 *) pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
 		goto usbhsf_pio_prepare_pop;
 
 	ret = usbhsf_fifo_select(pipe, fifo, 0);
@@ -884,7 +1058,7 @@ static int usbhsf_irq_empty(struct usbhs_priv *priv,
 		if (!(irq_state->bempsts & (1 << i)))
 			continue;
 
-		ret = usbhs_pkt_run(pipe);
+		ret = usbhsf_pkt_handler(pipe, USBHSF_PKT_TRY_RUN);
 		if (ret < 0)
 			dev_err(dev, "irq_empty run_error %d : %d\n", i, ret);
 	}
@@ -914,7 +1088,7 @@ static int usbhsf_irq_ready(struct usbhs_priv *priv,
 		if (!(irq_state->brdysts & (1 << i)))
 			continue;
 
-		ret = usbhs_pkt_run(pipe);
+		ret = usbhsf_pkt_handler(pipe, USBHSF_PKT_TRY_RUN);
 		if (ret < 0)
 			dev_err(dev, "irq_ready run_error %d : %d\n", i, ret);
 	}
@@ -929,7 +1103,7 @@ static void usbhsf_dma_complete(void *arg)
 	struct device *dev = usbhs_priv_to_dev(priv);
 	int ret;
 
-	ret = usbhs_pkt_dmadone(pipe);
+	ret = usbhsf_pkt_handler(pipe, USBHSF_PKT_DMA_DONE);
 	if (ret < 0)
 		dev_err(dev, "dma_complete run_error %d : %d\n",
 			usbhs_pipe_number(pipe), ret);
diff --git a/drivers/usb/renesas_usbhs/fifo.h b/drivers/usb/renesas_usbhs/fifo.h
index ed6d8e5..32a7b24 100644
--- a/drivers/usb/renesas_usbhs/fifo.h
+++ b/drivers/usb/renesas_usbhs/fifo.h
@@ -51,6 +51,8 @@ struct usbhs_pkt {
 	struct list_head node;
 	struct usbhs_pipe *pipe;
 	struct usbhs_pkt_handle *handler;
+	void (*done)(struct usbhs_priv *priv,
+		     struct usbhs_pkt *pkt);
 	dma_addr_t dma;
 	void *buf;
 	int length;
@@ -76,12 +78,6 @@ void usbhs_fifo_quit(struct usbhs_priv *priv);
 /*
  * packet info
  */
-enum {
-	USBHSF_PKT_PREPARE,
-	USBHSF_PKT_TRY_RUN,
-	USBHSF_PKT_DMA_DONE,
-};
-
 extern struct usbhs_pkt_handle usbhs_fifo_pio_push_handler;
 extern struct usbhs_pkt_handle usbhs_fifo_pio_pop_handler;
 extern struct usbhs_pkt_handle usbhs_ctrl_stage_end_handler;
@@ -89,16 +85,18 @@ extern struct usbhs_pkt_handle usbhs_ctrl_stage_end_handler;
 extern struct usbhs_pkt_handle usbhs_fifo_dma_push_handler;
 extern struct usbhs_pkt_handle usbhs_fifo_dma_pop_handler;
 
+extern struct usbhs_pkt_handle usbhs_dcp_status_stage_in_handler;
+extern struct usbhs_pkt_handle usbhs_dcp_status_stage_out_handler;
+
+extern struct usbhs_pkt_handle usbhs_dcp_data_stage_in_handler;
+extern struct usbhs_pkt_handle usbhs_dcp_data_stage_out_handler;
 
 void usbhs_pkt_init(struct usbhs_pkt *pkt);
 void usbhs_pkt_push(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt,
-		    struct usbhs_pkt_handle *handler,
+		    void (*done)(struct usbhs_priv *priv,
+				 struct usbhs_pkt *pkt),
 		    void *buf, int len, int zero);
 struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt);
-int __usbhs_pkt_handler(struct usbhs_pipe *pipe, int type);
-
-#define usbhs_pkt_start(p)	__usbhs_pkt_handler(p, USBHSF_PKT_PREPARE)
-#define usbhs_pkt_run(p)	__usbhs_pkt_handler(p, USBHSF_PKT_TRY_RUN)
-#define usbhs_pkt_dmadone(p)	__usbhs_pkt_handler(p, USBHSF_PKT_DMA_DONE)
+void usbhs_pkt_start(struct usbhs_pipe *pipe);
 
 #endif /* RENESAS_USB_FIFO_H */
diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c
index a577f8f..053f86d 100644
--- a/drivers/usb/renesas_usbhs/mod.c
+++ b/drivers/usb/renesas_usbhs/mod.c
@@ -58,7 +58,7 @@ void usbhs_mod_autonomy_mode(struct usbhs_priv *priv)
 	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
 
 	info->irq_vbus		= usbhsm_autonomy_irq_vbus;
-	priv->pfunc->get_vbus	= usbhsm_autonomy_get_vbus;
+	priv->pfunc.get_vbus	= usbhsm_autonomy_get_vbus;
 
 	usbhs_irq_callback_update(priv, NULL);
 }
@@ -93,8 +93,9 @@ struct usbhs_mod *usbhs_mod_get(struct usbhs_priv *priv, int id)
 	return ret;
 }
 
-int usbhs_mod_is_host(struct usbhs_priv *priv, struct usbhs_mod *mod)
+int usbhs_mod_is_host(struct usbhs_priv *priv)
 {
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
 	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
 
 	if (!mod)
@@ -139,13 +140,17 @@ int usbhs_mod_probe(struct usbhs_priv *priv)
 	/*
 	 * install host/gadget driver
 	 */
-	ret = usbhs_mod_gadget_probe(priv);
+	ret = usbhs_mod_host_probe(priv);
 	if (ret < 0)
 		return ret;
 
+	ret = usbhs_mod_gadget_probe(priv);
+	if (ret < 0)
+		goto mod_init_host_err;
+
 	/* irq settings */
 	ret = request_irq(priv->irq, usbhs_interrupt,
-			  IRQF_DISABLED, dev_name(dev), priv);
+			  0, dev_name(dev), priv);
 	if (ret) {
 		dev_err(dev, "irq request err\n");
 		goto mod_init_gadget_err;
@@ -155,12 +160,15 @@ int usbhs_mod_probe(struct usbhs_priv *priv)
 
 mod_init_gadget_err:
 	usbhs_mod_gadget_remove(priv);
+mod_init_host_err:
+	usbhs_mod_host_remove(priv);
 
 	return ret;
 }
 
 void usbhs_mod_remove(struct usbhs_priv *priv)
 {
+	usbhs_mod_host_remove(priv);
 	usbhs_mod_gadget_remove(priv);
 	free_irq(priv->irq, priv);
 }
@@ -168,20 +176,6 @@ void usbhs_mod_remove(struct usbhs_priv *priv)
 /*
  *		status functions
  */
-int usbhs_status_get_usb_speed(struct usbhs_irq_state *irq_state)
-{
-	switch (irq_state->dvstctr & RHST) {
-	case RHST_LOW_SPEED:
-		return USB_SPEED_LOW;
-	case RHST_FULL_SPEED:
-		return USB_SPEED_FULL;
-	case RHST_HIGH_SPEED:
-		return USB_SPEED_HIGH;
-	}
-
-	return USB_SPEED_UNKNOWN;
-}
-
 int usbhs_status_get_device_state(struct usbhs_irq_state *irq_state)
 {
 	int state = irq_state->intsts0 & DVSQ_MASK;
@@ -221,8 +215,6 @@ static void usbhs_status_get_each_irq(struct usbhs_priv *priv,
 	state->intsts0 = usbhs_read(priv, INTSTS0);
 	state->intsts1 = usbhs_read(priv, INTSTS1);
 
-	state->dvstctr = usbhs_read(priv, DVSTCTR);
-
 	/* mask */
 	if (mod) {
 		state->brdysts = usbhs_read(priv, BRDYSTS);
@@ -269,6 +261,8 @@ static irqreturn_t usbhs_interrupt(int irq, void *data)
 	 * see also
 	 *	usbhs_irq_setting_update
 	 */
+
+	/* INTSTS0 */
 	if (irq_state.intsts0 & VBINT)
 		usbhs_mod_info_call(priv, irq_vbus, priv, &irq_state);
 
@@ -284,15 +278,38 @@ static irqreturn_t usbhs_interrupt(int irq, void *data)
 	if (irq_state.intsts0 & BRDY)
 		usbhs_mod_call(priv, irq_ready, priv, &irq_state);
 
+	/* INTSTS1 */
+	if (irq_state.intsts1 & ATTCH)
+		usbhs_mod_call(priv, irq_attch, priv, &irq_state);
+
+	if (irq_state.intsts1 & DTCH)
+		usbhs_mod_call(priv, irq_dtch, priv, &irq_state);
+
+	if (irq_state.intsts1 & SIGN)
+		usbhs_mod_call(priv, irq_sign, priv, &irq_state);
+
+	if (irq_state.intsts1 & SACK)
+		usbhs_mod_call(priv, irq_sack, priv, &irq_state);
+
 	return IRQ_HANDLED;
 }
 
 void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod)
 {
 	u16 intenb0 = 0;
+	u16 intenb1 = 0;
 	struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
 
+	/*
+	 * BEMPENB/BRDYENB are picky.
+	 * below method is required
+	 *
+	 *  - clear  INTSTS0
+	 *  - update BEMPENB/BRDYENB
+	 *  - update INTSTS0
+	 */
 	usbhs_write(priv, INTENB0, 0);
+	usbhs_write(priv, INTENB1, 0);
 
 	usbhs_write(priv, BEMPENB, 0);
 	usbhs_write(priv, BRDYENB, 0);
@@ -310,6 +327,9 @@ void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod)
 		intenb0 |= VBSE;
 
 	if (mod) {
+		/*
+		 * INTSTS0
+		 */
 		if (mod->irq_ctrl_stage)
 			intenb0 |= CTRE;
 
@@ -322,7 +342,26 @@ void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod)
 			usbhs_write(priv, BRDYENB, mod->irq_brdysts);
 			intenb0 |= BRDYE;
 		}
+
+		/*
+		 * INTSTS1
+		 */
+		if (mod->irq_attch)
+			intenb1 |= ATTCHE;
+
+		if (mod->irq_attch)
+			intenb1 |= DTCHE;
+
+		if (mod->irq_sign)
+			intenb1 |= SIGNE;
+
+		if (mod->irq_sack)
+			intenb1 |= SACKE;
 	}
 
-	usbhs_write(priv, INTENB0, intenb0);
+	if (intenb0)
+		usbhs_write(priv, INTENB0, intenb0);
+
+	if (intenb1)
+		usbhs_write(priv, INTENB1, intenb1);
 }
diff --git a/drivers/usb/renesas_usbhs/mod.h b/drivers/usb/renesas_usbhs/mod.h
index 5c845a2..8ae3733 100644
--- a/drivers/usb/renesas_usbhs/mod.h
+++ b/drivers/usb/renesas_usbhs/mod.h
@@ -30,7 +30,6 @@ struct usbhs_irq_state {
 	u16 brdysts;
 	u16 nrdysts;
 	u16 bempsts;
-	u16 dvstctr;
 };
 
 struct usbhs_mod {
@@ -42,26 +41,48 @@ struct usbhs_mod {
 	int (*start)(struct usbhs_priv *priv);
 	int (*stop)(struct usbhs_priv *priv);
 
-	/* INTSTS0 :: DVST (DVSQ) */
+	/*
+	 * INTSTS0
+	 */
+
+	/* DVST (DVSQ) */
 	int (*irq_dev_state)(struct usbhs_priv *priv,
 			     struct usbhs_irq_state *irq_state);
 
-	/* INTSTS0 :: CTRT (CTSQ) */
+	/* CTRT (CTSQ) */
 	int (*irq_ctrl_stage)(struct usbhs_priv *priv,
 			      struct usbhs_irq_state *irq_state);
 
-	/* INTSTS0 :: BEMP */
-	/* BEMPSTS */
+	/* BEMP / BEMPSTS */
 	int (*irq_empty)(struct usbhs_priv *priv,
 			 struct usbhs_irq_state *irq_state);
 	u16 irq_bempsts;
 
-	/* INTSTS0 :: BRDY */
-	/* BRDYSTS */
+	/* BRDY / BRDYSTS */
 	int (*irq_ready)(struct usbhs_priv *priv,
 			 struct usbhs_irq_state *irq_state);
 	u16 irq_brdysts;
 
+	/*
+	 * INTSTS1
+	 */
+
+	/* ATTCHE */
+	int (*irq_attch)(struct usbhs_priv *priv,
+			 struct usbhs_irq_state *irq_state);
+
+	/* DTCHE */
+	int (*irq_dtch)(struct usbhs_priv *priv,
+			struct usbhs_irq_state *irq_state);
+
+	/* SIGN */
+	int (*irq_sign)(struct usbhs_priv *priv,
+			struct usbhs_irq_state *irq_state);
+
+	/* SACK */
+	int (*irq_sack)(struct usbhs_priv *priv,
+			struct usbhs_irq_state *irq_state);
+
 	struct usbhs_priv *priv;
 };
 
@@ -89,7 +110,7 @@ struct usbhs_mod_info {
 struct usbhs_mod *usbhs_mod_get(struct usbhs_priv *priv, int id);
 struct usbhs_mod *usbhs_mod_get_current(struct usbhs_priv *priv);
 void usbhs_mod_register(struct usbhs_priv *priv, struct usbhs_mod *usb, int id);
-int usbhs_mod_is_host(struct usbhs_priv *priv, struct usbhs_mod *mod);
+int usbhs_mod_is_host(struct usbhs_priv *priv);
 int usbhs_mod_change(struct usbhs_priv *priv, int id);
 int usbhs_mod_probe(struct usbhs_priv *priv);
 void usbhs_mod_remove(struct usbhs_priv *priv);
@@ -99,7 +120,6 @@ void usbhs_mod_autonomy_mode(struct usbhs_priv *priv);
 /*
  *		status functions
  */
-int usbhs_status_get_usb_speed(struct usbhs_irq_state *irq_state);
 int usbhs_status_get_device_state(struct usbhs_irq_state *irq_state);
 int usbhs_status_get_ctrl_stage(struct usbhs_irq_state *irq_state);
 
@@ -119,9 +139,24 @@ void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod);
 	})
 
 /*
- * gadget control
+ * host / gadget control
  */
-#ifdef CONFIG_USB_RENESAS_USBHS_UDC
+#if	defined(CONFIG_USB_RENESAS_USBHS_HCD) || \
+	defined(CONFIG_USB_RENESAS_USBHS_HCD_MODULE)
+extern int __devinit usbhs_mod_host_probe(struct usbhs_priv *priv);
+extern int __devexit usbhs_mod_host_remove(struct usbhs_priv *priv);
+#else
+static inline int usbhs_mod_host_probe(struct usbhs_priv *priv)
+{
+	return 0;
+}
+static inline void usbhs_mod_host_remove(struct usbhs_priv *priv)
+{
+}
+#endif
+
+#if	defined(CONFIG_USB_RENESAS_USBHS_UDC) || \
+	defined(CONFIG_USB_RENESAS_USBHS_UDC_MODULE)
 extern int __devinit usbhs_mod_gadget_probe(struct usbhs_priv *priv);
 extern void __devexit usbhs_mod_gadget_remove(struct usbhs_priv *priv);
 #else
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index cb2d451..4cc7ee0 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -39,7 +39,6 @@ struct usbhsg_uep {
 	char ep_name[EP_NAME_SIZE];
 
 	struct usbhsg_gpriv *gpriv;
-	struct usbhs_pkt_handle *handler;
 };
 
 struct usbhsg_gpriv {
@@ -128,25 +127,6 @@ LIST_HEAD(the_controller_link);
 /*
  *		queue push/pop
  */
-static void usbhsg_queue_push(struct usbhsg_uep *uep,
-			      struct usbhsg_request *ureq)
-{
-	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
-	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
-	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
-	struct usbhs_pkt *pkt = usbhsg_ureq_to_pkt(ureq);
-	struct usb_request *req = &ureq->req;
-
-	req->actual = 0;
-	req->status = -EINPROGRESS;
-	usbhs_pkt_push(pipe, pkt, uep->handler,
-		       req->buf, req->length, req->zero);
-
-	dev_dbg(dev, "pipe %d : queue push (%d)\n",
-		usbhs_pipe_number(pipe),
-		req->length);
-}
-
 static void usbhsg_queue_pop(struct usbhsg_uep *uep,
 			     struct usbhsg_request *ureq,
 			     int status)
@@ -161,7 +141,7 @@ static void usbhsg_queue_pop(struct usbhsg_uep *uep,
 	ureq->req.complete(&uep->ep, &ureq->req);
 }
 
-static void usbhsg_queue_done(struct usbhs_pkt *pkt)
+static void usbhsg_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt)
 {
 	struct usbhs_pipe *pipe = pkt->pipe;
 	struct usbhsg_uep *uep = usbhsg_pipe_to_uep(pipe);
@@ -172,6 +152,26 @@ static void usbhsg_queue_done(struct usbhs_pkt *pkt)
 	usbhsg_queue_pop(uep, ureq, 0);
 }
 
+static void usbhsg_queue_push(struct usbhsg_uep *uep,
+			      struct usbhsg_request *ureq)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+	struct usbhs_pkt *pkt = usbhsg_ureq_to_pkt(ureq);
+	struct usb_request *req = &ureq->req;
+
+	req->actual = 0;
+	req->status = -EINPROGRESS;
+	usbhs_pkt_push(pipe, pkt, usbhsg_queue_done,
+		       req->buf, req->length, req->zero);
+	usbhs_pkt_start(pipe);
+
+	dev_dbg(dev, "pipe %d : queue push (%d)\n",
+		usbhs_pipe_number(pipe),
+		req->length);
+}
+
 /*
  *		dma map/unmap
  */
@@ -265,7 +265,7 @@ static int usbhsg_recip_handler_std_clear_endpoint(struct usbhs_priv *priv,
 
 	if (!usbhsg_status_has(gpriv, USBHSG_STATUS_WEDGE)) {
 		usbhs_pipe_disable(pipe);
-		usbhs_pipe_clear_sequence(pipe);
+		usbhs_pipe_sequence_data0(pipe);
 		usbhs_pipe_enable(pipe);
 	}
 
@@ -355,7 +355,7 @@ static int usbhsg_irq_dev_state(struct usbhs_priv *priv,
 	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
 	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
 
-	gpriv->gadget.speed = usbhs_status_get_usb_speed(irq_state);
+	gpriv->gadget.speed = usbhs_bus_get_speed(priv);
 
 	dev_dbg(dev, "state = %x : speed : %d\n",
 		usbhs_status_get_device_state(irq_state),
@@ -389,13 +389,13 @@ static int usbhsg_irq_ctrl_stage(struct usbhs_priv *priv,
 
 	switch (stage) {
 	case READ_DATA_STAGE:
-		dcp->handler = &usbhs_fifo_pio_push_handler;
+		pipe->handler = &usbhs_fifo_pio_push_handler;
 		break;
 	case WRITE_DATA_STAGE:
-		dcp->handler = &usbhs_fifo_pio_pop_handler;
+		pipe->handler = &usbhs_fifo_pio_pop_handler;
 		break;
 	case NODATA_STATUS_STAGE:
-		dcp->handler = &usbhs_ctrl_stage_end_handler;
+		pipe->handler = &usbhs_ctrl_stage_end_handler;
 		break;
 	default:
 		return ret;
@@ -479,24 +479,31 @@ static int usbhsg_ep_enable(struct usb_ep *ep,
 	 */
 	if (uep->pipe) {
 		usbhs_pipe_clear(uep->pipe);
-		usbhs_pipe_clear_sequence(uep->pipe);
+		usbhs_pipe_sequence_data0(uep->pipe);
 		return 0;
 	}
 
-	pipe = usbhs_pipe_malloc(priv, desc);
+	pipe = usbhs_pipe_malloc(priv,
+				 usb_endpoint_type(desc),
+				 usb_endpoint_dir_in(desc));
 	if (pipe) {
 		uep->pipe		= pipe;
 		pipe->mod_private	= uep;
 
+		/* set epnum / maxp */
+		usbhs_pipe_config_update(pipe, 0,
+					 usb_endpoint_num(desc),
+					 usb_endpoint_maxp(desc));
+
 		/*
 		 * usbhs_fifo_dma_push/pop_handler try to
 		 * use dmaengine if possible.
 		 * It will use pio handler if impossible.
 		 */
 		if (usb_endpoint_dir_in(desc))
-			uep->handler = &usbhs_fifo_dma_push_handler;
+			pipe->handler = &usbhs_fifo_dma_push_handler;
 		else
-			uep->handler = &usbhs_fifo_dma_pop_handler;
+			pipe->handler = &usbhs_fifo_dma_pop_handler;
 
 		ret = 0;
 	}
@@ -659,7 +666,6 @@ static int usbhsg_try_start(struct usbhs_priv *priv, u32 status)
 	 * pipe initialize and enable DCP
 	 */
 	usbhs_pipe_init(priv,
-			usbhsg_queue_done,
 			usbhsg_dma_map_ctrl);
 	usbhs_fifo_init(priv);
 	usbhsg_uep_init(gpriv);
@@ -667,6 +673,7 @@ static int usbhsg_try_start(struct usbhs_priv *priv, u32 status)
 	/* dcp init */
 	dcp->pipe		= usbhs_dcp_malloc(priv);
 	dcp->pipe->mod_private	= dcp;
+	usbhs_pipe_config_update(dcp->pipe, 0, 0, 64);
 
 	/*
 	 * system config enble
@@ -730,10 +737,6 @@ static int usbhsg_try_stop(struct usbhs_priv *priv, u32 status)
 
 	usbhsg_pipe_disable(dcp);
 
-	if (gpriv->driver &&
-	    gpriv->driver->disconnect)
-		gpriv->driver->disconnect(&gpriv->gadget);
-
 	dev_dbg(dev, "stop gadget\n");
 
 	return 0;
@@ -744,31 +747,19 @@ static int usbhsg_try_stop(struct usbhs_priv *priv, u32 status)
  *		linux usb function
  *
  */
-static int usbhsg_gadget_start(struct usb_gadget_driver *driver,
-			    int (*bind)(struct usb_gadget *))
+static int usbhsg_gadget_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct usbhsg_gpriv *gpriv;
+	struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
 	struct usbhs_priv *priv;
 	struct device *dev;
 	int ret;
 
-	if (!bind		||
-	    !driver		||
+	if (!driver		||
 	    !driver->setup	||
 	    driver->speed != USB_SPEED_HIGH)
 		return -EINVAL;
 
-	/*
-	 * find unused controller
-	 */
-	usbhsg_for_each_controller(gpriv) {
-		if (!gpriv->driver)
-			goto find_unused_controller;
-	}
-	return -ENODEV;
-
-find_unused_controller:
-
 	dev  = usbhsg_gpriv_to_dev(gpriv);
 	priv = usbhsg_gpriv_to_priv(gpriv);
 
@@ -782,19 +773,8 @@ find_unused_controller:
 		goto add_fail;
 	}
 
-	ret = bind(&gpriv->gadget);
-	if (ret) {
-		dev_err(dev, "bind to driver %s error %d\n",
-			driver->driver.name, ret);
-		goto bind_fail;
-	}
-
-	dev_dbg(dev, "bind %s\n", driver->driver.name);
-
 	return usbhsg_try_start(priv, USBHSG_STATUS_REGISTERD);
 
-bind_fail:
-	device_del(&gpriv->gadget.dev);
 add_fail:
 	gpriv->driver = NULL;
 	gpriv->gadget.dev.driver = NULL;
@@ -802,9 +782,10 @@ add_fail:
 	return ret;
 }
 
-static int usbhsg_gadget_stop(struct usb_gadget_driver *driver)
+static int usbhsg_gadget_stop(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct usbhsg_gpriv *gpriv;
+	struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
 	struct usbhs_priv *priv;
 	struct device *dev;
 
@@ -812,17 +793,6 @@ static int usbhsg_gadget_stop(struct usb_gadget_driver *driver)
 	    !driver->unbind)
 		return -EINVAL;
 
-	/*
-	 * find controller
-	 */
-	usbhsg_for_each_controller(gpriv) {
-		if (gpriv->driver == driver)
-			goto find_matching_controller;
-	}
-	return -ENODEV;
-
-find_matching_controller:
-
 	dev  = usbhsg_gpriv_to_dev(gpriv);
 	priv = usbhsg_gpriv_to_priv(gpriv);
 
@@ -830,12 +800,6 @@ find_matching_controller:
 	device_del(&gpriv->gadget.dev);
 	gpriv->driver = NULL;
 
-	if (driver->disconnect)
-		driver->disconnect(&gpriv->gadget);
-
-	driver->unbind(&gpriv->gadget);
-	dev_dbg(dev, "unbind %s\n", driver->driver.name);
-
 	return 0;
 }
 
@@ -852,8 +816,8 @@ static int usbhsg_get_frame(struct usb_gadget *gadget)
 
 static struct usb_gadget_ops usbhsg_gadget_ops = {
 	.get_frame		= usbhsg_get_frame,
-	.start			= usbhsg_gadget_start,
-	.stop			= usbhsg_gadget_stop,
+	.udc_start		= usbhsg_gadget_start,
+	.udc_stop		= usbhsg_gadget_stop,
 };
 
 static int usbhsg_start(struct usbhs_priv *priv)
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
new file mode 100644
index 0000000..1a7208a
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -0,0 +1,1312 @@
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include "common.h"
+
+/*
+ *** HARDWARE LIMITATION ***
+ *
+ * 1) renesas_usbhs has a limited number of controllable devices.
+ *    it can control only 9 devices in generally.
+ *	see DEVADDn / DCPMAXP / PIPEMAXP.
+ *
+ * 2) renesas_usbhs pipe number is limited.
+ *    the pipe will be re-used for each devices.
+ *    so, software should control DATA0/1 sequence of each devices.
+ */
+
+
+/*
+ *		image of mod_host
+ *
+ * +--------+
+ * | udev 0 | --> it is used when set address
+ * +--------+
+ *
+ * +--------+					pipes are reused for each uep.
+ * | udev 1 |-+- [uep 0 (dcp) ] --+		pipe will be switched when
+ * +--------+ |			  |		target device was changed
+ *	      +- [uep 1 (bulk)]	--|---+		   +--------------+
+ *	      |			  +--------------> | pipe0 (dcp)  |
+ *	      +- [uep 2 (bulk)]	--|---|---+	   +--------------+
+ *				  |   |	  |	   | pipe1 (isoc) |
+ * +--------+			  |   |	  |	   +--------------+
+ * | udev 2 |-+- [uep 0 (dcp) ]	--+   +-- |------> | pipe2 (bulk) |
+ * +--------+ |			  |   |	  |	   +--------------+
+ *	      +- [uep 1 (int) ]	--|-+ |	  +------> | pipe3 (bulk) |
+ *				  | | |	  |	   +--------------+
+ * +--------+			  | +-|---|------> | pipe4 (int)  |
+ * | udev 3 |-+- [uep 0 (dcp) ]	--+   |	  |	   +--------------+
+ * +--------+ |			      |	  |	   | ....	  |
+ *	      +- [uep 1 (bulk)]	------+	  |	   | ....	  |
+ *	      |				  |
+ *	      +- [uep 2 (bulk)]-----------+
+ */
+
+
+/*
+ *		struct
+ */
+struct usbhsh_pipe_info {
+	unsigned int		usr_cnt; /* see usbhsh_endpoint_alloc() */
+};
+
+struct usbhsh_request {
+	struct urb		*urb;
+	struct usbhs_pkt	pkt;
+	struct list_head	ureq_link; /* see hpriv :: ureq_link_xxx */
+};
+
+struct usbhsh_device {
+	struct usb_device	*usbv;
+	struct list_head	ep_list_head; /* list of usbhsh_ep */
+};
+
+struct usbhsh_ep {
+	struct usbhs_pipe	*pipe;
+	struct usbhsh_device	*udev;   /* attached udev */
+	struct list_head	ep_list; /* list to usbhsh_device */
+
+	int maxp;
+};
+
+#define USBHSH_DEVICE_MAX	10 /* see DEVADDn / DCPMAXP / PIPEMAXP */
+#define USBHSH_PORT_MAX		 7 /* see DEVADDn :: HUBPORT */
+struct usbhsh_hpriv {
+	struct usbhs_mod	mod;
+	struct usbhs_pipe	*dcp;
+
+	struct usbhsh_device	udev[USBHSH_DEVICE_MAX];
+
+	struct usbhsh_pipe_info	*pipe_info;
+	int			 pipe_size;
+
+	u32	port_stat;	/* USB_PORT_STAT_xxx */
+
+	struct completion	*done;
+
+	/* see usbhsh_req_alloc/free */
+	struct list_head	ureq_link_active;
+	struct list_head	ureq_link_free;
+};
+
+
+static const char usbhsh_hcd_name[] = "renesas_usbhs host";
+
+/*
+ *		macro
+ */
+#define usbhsh_priv_to_hpriv(priv) \
+	container_of(usbhs_mod_get(priv, USBHS_HOST), struct usbhsh_hpriv, mod)
+
+#define __usbhsh_for_each_hpipe(start, pos, h, i)	\
+	for (i = start, pos = (h)->hpipe + i;		\
+	     i < (h)->hpipe_size;			\
+	     i++, pos = (h)->hpipe + i)
+
+#define usbhsh_for_each_hpipe(pos, hpriv, i)	\
+	__usbhsh_for_each_hpipe(1, pos, hpriv, i)
+
+#define usbhsh_for_each_hpipe_with_dcp(pos, hpriv, i)	\
+	__usbhsh_for_each_hpipe(0, pos, hpriv, i)
+
+#define __usbhsh_for_each_udev(start, pos, h, i)	\
+	for (i = start, pos = (h)->udev + i;		\
+	     i < USBHSH_DEVICE_MAX;			\
+	     i++, pos = (h)->udev + i)
+
+#define usbhsh_for_each_udev(pos, hpriv, i)	\
+	__usbhsh_for_each_udev(1, pos, hpriv, i)
+
+#define usbhsh_for_each_udev_with_dev0(pos, hpriv, i)	\
+	__usbhsh_for_each_udev(0, pos, hpriv, i)
+
+#define usbhsh_hcd_to_hpriv(h)	(struct usbhsh_hpriv *)((h)->hcd_priv)
+#define usbhsh_hcd_to_dev(h)	((h)->self.controller)
+
+#define usbhsh_hpriv_to_priv(h)	((h)->mod.priv)
+#define usbhsh_hpriv_to_dcp(h)	((h)->dcp)
+#define usbhsh_hpriv_to_hcd(h)	\
+	container_of((void *)h, struct usb_hcd, hcd_priv)
+
+#define usbhsh_ep_to_uep(u)	((u)->hcpriv)
+#define usbhsh_uep_to_pipe(u)	((u)->pipe)
+#define usbhsh_uep_to_udev(u)	((u)->udev)
+#define usbhsh_urb_to_ureq(u)	((u)->hcpriv)
+#define usbhsh_urb_to_usbv(u)	((u)->dev)
+
+#define usbhsh_usbv_to_udev(d)	dev_get_drvdata(&(d)->dev)
+
+#define usbhsh_udev_to_usbv(h)	((h)->usbv)
+
+#define usbhsh_pipe_info(p)	((p)->mod_private)
+
+#define usbhsh_device_number(h, d)	((int)((d) - (h)->udev))
+#define usbhsh_device_nth(h, d)		((h)->udev + d)
+#define usbhsh_device0(h)		usbhsh_device_nth(h, 0)
+
+#define usbhsh_port_stat_init(h)	((h)->port_stat = 0)
+#define usbhsh_port_stat_set(h, s)	((h)->port_stat |= (s))
+#define usbhsh_port_stat_clear(h, s)	((h)->port_stat &= ~(s))
+#define usbhsh_port_stat_get(h)		((h)->port_stat)
+
+#define usbhsh_pkt_to_req(p)	\
+	container_of((void *)p, struct usbhsh_request, pkt)
+
+/*
+ *		req alloc/free
+ */
+static void usbhsh_req_list_init(struct usbhsh_hpriv *hpriv)
+{
+	INIT_LIST_HEAD(&hpriv->ureq_link_active);
+	INIT_LIST_HEAD(&hpriv->ureq_link_free);
+}
+
+static void usbhsh_req_list_quit(struct usbhsh_hpriv *hpriv)
+{
+	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+	struct device *dev = usbhsh_hcd_to_dev(hcd);
+	struct usbhsh_request *ureq, *next;
+
+	/* kfree all active ureq */
+	list_for_each_entry_safe(ureq, next,
+				 &hpriv->ureq_link_active,
+				 ureq_link) {
+		dev_err(dev, "active ureq (%p) is force freed\n", ureq);
+		kfree(ureq);
+	}
+
+	/* kfree all free ureq */
+	list_for_each_entry_safe(ureq, next, &hpriv->ureq_link_free, ureq_link)
+		kfree(ureq);
+}
+
+static struct usbhsh_request *usbhsh_req_alloc(struct usbhsh_hpriv *hpriv,
+					       struct urb *urb,
+					       gfp_t mem_flags)
+{
+	struct usbhsh_request *ureq;
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	if (list_empty(&hpriv->ureq_link_free)) {
+		/*
+		 * create new one if there is no free ureq
+		 */
+		ureq = kzalloc(sizeof(struct usbhsh_request), mem_flags);
+		if (ureq)
+			INIT_LIST_HEAD(&ureq->ureq_link);
+	} else {
+		/*
+		 * reuse "free" ureq if exist
+		 */
+		ureq = list_entry(hpriv->ureq_link_free.next,
+				  struct usbhsh_request,
+				  ureq_link);
+		if (ureq)
+			list_del_init(&ureq->ureq_link);
+	}
+
+	if (!ureq) {
+		dev_err(dev, "ureq alloc fail\n");
+		return NULL;
+	}
+
+	usbhs_pkt_init(&ureq->pkt);
+
+	/*
+	 * push it to "active" list
+	 */
+	list_add_tail(&ureq->ureq_link, &hpriv->ureq_link_active);
+	ureq->urb = urb;
+
+	return ureq;
+}
+
+static void usbhsh_req_free(struct usbhsh_hpriv *hpriv,
+			    struct usbhsh_request *ureq)
+{
+	struct usbhs_pkt *pkt = &ureq->pkt;
+
+	usbhs_pkt_init(pkt);
+
+	/*
+	 * removed from "active" list,
+	 * and push it to "free" list
+	 */
+	ureq->urb = NULL;
+	list_del_init(&ureq->ureq_link);
+	list_add_tail(&ureq->ureq_link, &hpriv->ureq_link_free);
+}
+
+/*
+ *		device control
+ */
+
+static int usbhsh_device_has_endpoint(struct usbhsh_device *udev)
+{
+	return !list_empty(&udev->ep_list_head);
+}
+
+static struct usbhsh_device *usbhsh_device_alloc(struct usbhsh_hpriv *hpriv,
+						 struct urb *urb)
+{
+	struct usbhsh_device *udev = NULL;
+	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+	struct device *dev = usbhsh_hcd_to_dev(hcd);
+	struct usb_device *usbv = usbhsh_urb_to_usbv(urb);
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	int i;
+
+	/*
+	 * device 0
+	 */
+	if (0 == usb_pipedevice(urb->pipe)) {
+		udev = usbhsh_device0(hpriv);
+		goto usbhsh_device_find;
+	}
+
+	/*
+	 * find unused device
+	 */
+	usbhsh_for_each_udev(udev, hpriv, i) {
+		if (usbhsh_udev_to_usbv(udev))
+			continue;
+		goto usbhsh_device_find;
+	}
+
+	dev_err(dev, "no free usbhsh_device\n");
+
+	return NULL;
+
+usbhsh_device_find:
+	if (usbhsh_device_has_endpoint(udev))
+		dev_warn(dev, "udev have old endpoint\n");
+
+	/* uep will be attached */
+	INIT_LIST_HEAD(&udev->ep_list_head);
+
+	/*
+	 * usbhsh_usbv_to_udev()
+	 * usbhsh_udev_to_usbv()
+	 * will be enable
+	 */
+	dev_set_drvdata(&usbv->dev, udev);
+	udev->usbv = usbv;
+
+	/* set device config */
+	usbhs_set_device_speed(priv,
+			       usbhsh_device_number(hpriv, udev),
+			       usbhsh_device_number(hpriv, udev),
+			       0, /* FIXME no parent */
+			       usbv->speed);
+
+	dev_dbg(dev, "%s [%d](%p)\n", __func__,
+		usbhsh_device_number(hpriv, udev), udev);
+
+	return udev;
+}
+
+static void usbhsh_device_free(struct usbhsh_hpriv *hpriv,
+			       struct usbhsh_device *udev)
+{
+	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+	struct device *dev = usbhsh_hcd_to_dev(hcd);
+	struct usb_device *usbv = usbhsh_udev_to_usbv(udev);
+
+	dev_dbg(dev, "%s [%d](%p)\n", __func__,
+		usbhsh_device_number(hpriv, udev), udev);
+
+	if (usbhsh_device_has_endpoint(udev))
+		dev_warn(dev, "udev still have endpoint\n");
+
+	/*
+	 * usbhsh_usbv_to_udev()
+	 * usbhsh_udev_to_usbv()
+	 * will be disable
+	 */
+	dev_set_drvdata(&usbv->dev, NULL);
+	udev->usbv = NULL;
+}
+
+/*
+ *		end-point control
+ */
+struct usbhsh_ep *usbhsh_endpoint_alloc(struct usbhsh_hpriv *hpriv,
+					struct usbhsh_device *udev,
+					struct usb_host_endpoint *ep,
+					gfp_t mem_flags)
+{
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+	struct usbhsh_ep *uep;
+	struct usbhsh_pipe_info *info;
+	struct usbhs_pipe *pipe, *best_pipe;
+	struct device *dev = usbhsh_hcd_to_dev(hcd);
+	struct usb_endpoint_descriptor *desc = &ep->desc;
+	int type, i;
+	unsigned int min_usr;
+
+	uep = kzalloc(sizeof(struct usbhsh_ep), mem_flags);
+	if (!uep) {
+		dev_err(dev, "usbhsh_ep alloc fail\n");
+		return NULL;
+	}
+	type = usb_endpoint_type(desc);
+
+	/*
+	 * find best pipe for endpoint
+	 * see
+	 *	HARDWARE LIMITATION
+	 */
+	min_usr = ~0;
+	best_pipe = NULL;
+	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
+		if (!usbhs_pipe_type_is(pipe, type))
+			continue;
+
+		info = usbhsh_pipe_info(pipe);
+
+		if (min_usr > info->usr_cnt) {
+			min_usr		= info->usr_cnt;
+			best_pipe	= pipe;
+		}
+	}
+
+	if (unlikely(!best_pipe)) {
+		dev_err(dev, "couldn't find best pipe\n");
+		kfree(uep);
+		return NULL;
+	}
+
+	/*
+	 * init uep
+	 */
+	uep->pipe	= best_pipe;
+	uep->maxp	= usb_endpoint_maxp(desc);
+	usbhsh_uep_to_udev(uep)	= udev;
+	usbhsh_ep_to_uep(ep)	= uep;
+
+	/*
+	 * update pipe user count
+	 */
+	info = usbhsh_pipe_info(best_pipe);
+	info->usr_cnt++;
+
+	/* init this endpoint, and attach it to udev */
+	INIT_LIST_HEAD(&uep->ep_list);
+	list_add_tail(&uep->ep_list, &udev->ep_list_head);
+
+	/*
+	 * usbhs_pipe_config_update() should be called after
+	 * usbhs_device_config()
+	 * see
+	 *  DCPMAXP/PIPEMAXP
+	 */
+	usbhs_pipe_config_update(uep->pipe,
+				 usbhsh_device_number(hpriv, udev),
+				 usb_endpoint_num(desc),
+				 uep->maxp);
+
+	dev_dbg(dev, "%s [%d-%s](%p)\n", __func__,
+		usbhsh_device_number(hpriv, udev),
+		usbhs_pipe_name(pipe), uep);
+
+	return uep;
+}
+
+void usbhsh_endpoint_free(struct usbhsh_hpriv *hpriv,
+			  struct usb_host_endpoint *ep)
+{
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	struct usbhsh_ep *uep = usbhsh_ep_to_uep(ep);
+	struct usbhsh_pipe_info *info;
+
+	if (!uep)
+		return;
+
+	dev_dbg(dev, "%s [%d-%s](%p)\n", __func__,
+		usbhsh_device_number(hpriv, usbhsh_uep_to_udev(uep)),
+		usbhs_pipe_name(uep->pipe), uep);
+
+	info = usbhsh_pipe_info(uep->pipe);
+	info->usr_cnt--;
+
+	/* remove this endpoint from udev */
+	list_del_init(&uep->ep_list);
+
+	usbhsh_uep_to_udev(uep) = NULL;
+	usbhsh_ep_to_uep(ep) = NULL;
+
+	kfree(uep);
+}
+
+/*
+ *		queue push/pop
+ */
+static void usbhsh_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt)
+{
+	struct usbhsh_request *ureq = usbhsh_pkt_to_req(pkt);
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+	struct urb *urb = ureq->urb;
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	if (!urb) {
+		dev_warn(dev, "pkt doesn't have urb\n");
+		return;
+	}
+
+	urb->actual_length = pkt->actual;
+	usbhsh_req_free(hpriv, ureq);
+	usbhsh_urb_to_ureq(urb) = NULL;
+
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+	usb_hcd_giveback_urb(hcd, urb, 0);
+}
+
+static int usbhsh_queue_push(struct usb_hcd *hcd,
+			     struct usbhs_pipe *pipe,
+			     struct urb *urb)
+{
+	struct usbhsh_request *ureq = usbhsh_urb_to_ureq(urb);
+	struct usbhs_pkt *pkt = &ureq->pkt;
+	struct device *dev = usbhsh_hcd_to_dev(hcd);
+	void *buf;
+	int len;
+
+	if (usb_pipeisoc(urb->pipe)) {
+		dev_err(dev, "pipe iso is not supported now\n");
+		return -EIO;
+	}
+
+	if (usb_pipein(urb->pipe))
+		pipe->handler = &usbhs_fifo_pio_pop_handler;
+	else
+		pipe->handler = &usbhs_fifo_pio_push_handler;
+
+	buf = (void *)(urb->transfer_buffer + urb->actual_length);
+	len = urb->transfer_buffer_length - urb->actual_length;
+
+	dev_dbg(dev, "%s\n", __func__);
+	usbhs_pkt_push(pipe, pkt, usbhsh_queue_done,
+		       buf, len, (urb->transfer_flags & URB_ZERO_PACKET));
+	usbhs_pkt_start(pipe);
+
+	return 0;
+}
+
+/*
+ *		DCP setup stage
+ */
+static int usbhsh_is_request_address(struct urb *urb)
+{
+	struct usb_ctrlrequest *cmd;
+
+	cmd = (struct usb_ctrlrequest *)urb->setup_packet;
+
+	if ((DeviceOutRequest    == cmd->bRequestType << 8) &&
+	    (USB_REQ_SET_ADDRESS == cmd->bRequest))
+		return 1;
+	else
+		return 0;
+}
+
+static void usbhsh_setup_stage_packet_push(struct usbhsh_hpriv *hpriv,
+					   struct urb *urb,
+					   struct usbhs_pipe *pipe)
+{
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct usb_ctrlrequest req;
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	/*
+	 * wait setup packet ACK
+	 * see
+	 *	usbhsh_irq_setup_ack()
+	 *	usbhsh_irq_setup_err()
+	 */
+	DECLARE_COMPLETION(done);
+	hpriv->done = &done;
+
+	/* copy original request */
+	memcpy(&req, urb->setup_packet, sizeof(struct usb_ctrlrequest));
+
+	/*
+	 * renesas_usbhs can not use original usb address.
+	 * see HARDWARE LIMITATION.
+	 * modify usb address here.
+	 */
+	if (usbhsh_is_request_address(urb)) {
+		/* FIXME */
+		req.wValue = 1;
+		dev_dbg(dev, "create new address - %d\n", req.wValue);
+	}
+
+	/* set request */
+	usbhs_usbreq_set_val(priv, &req);
+
+	/*
+	 * wait setup packet ACK
+	 */
+	wait_for_completion(&done);
+	hpriv->done = NULL;
+
+	dev_dbg(dev, "%s done\n", __func__);
+}
+
+/*
+ *		DCP data stage
+ */
+static void usbhsh_data_stage_packet_done(struct usbhs_priv *priv,
+					  struct usbhs_pkt *pkt)
+{
+	struct usbhsh_request *ureq = usbhsh_pkt_to_req(pkt);
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct urb *urb = ureq->urb;
+
+	/* this ureq was connected to urb when usbhsh_urb_enqueue()  */
+
+	usbhsh_req_free(hpriv, ureq);
+	usbhsh_urb_to_ureq(urb) = NULL;
+}
+
+static void usbhsh_data_stage_packet_push(struct usbhsh_hpriv *hpriv,
+					  struct urb *urb,
+					  struct usbhs_pipe *pipe)
+{
+	struct usbhsh_request *ureq;
+	struct usbhs_pkt *pkt;
+
+	/*
+	 * FIXME
+	 *
+	 * data stage uses ureq which is connected to urb
+	 * see usbhsh_urb_enqueue() :: alloc new request.
+	 * it will be freed in usbhsh_data_stage_packet_done()
+	 */
+	ureq	= usbhsh_urb_to_ureq(urb);
+	pkt	= &ureq->pkt;
+
+	if (usb_pipein(urb->pipe))
+		pipe->handler = &usbhs_dcp_data_stage_in_handler;
+	else
+		pipe->handler = &usbhs_dcp_data_stage_out_handler;
+
+	usbhs_pkt_push(pipe, pkt,
+		       usbhsh_data_stage_packet_done,
+		       urb->transfer_buffer,
+		       urb->transfer_buffer_length,
+		       (urb->transfer_flags & URB_ZERO_PACKET));
+}
+
+/*
+ *		DCP status stage
+ */
+static void usbhsh_status_stage_packet_push(struct usbhsh_hpriv *hpriv,
+					    struct urb *urb,
+					    struct usbhs_pipe *pipe)
+{
+	struct usbhsh_request *ureq;
+	struct usbhs_pkt *pkt;
+
+	/*
+	 * FIXME
+	 *
+	 * status stage uses allocated ureq.
+	 * it will be freed on usbhsh_queue_done()
+	 */
+	ureq	= usbhsh_req_alloc(hpriv, urb, GFP_KERNEL);
+	pkt	= &ureq->pkt;
+
+	if (usb_pipein(urb->pipe))
+		pipe->handler = &usbhs_dcp_status_stage_in_handler;
+	else
+		pipe->handler = &usbhs_dcp_status_stage_out_handler;
+
+	usbhs_pkt_push(pipe, pkt,
+		       usbhsh_queue_done,
+		       NULL,
+		       urb->transfer_buffer_length,
+		       0);
+}
+
+static int usbhsh_dcp_queue_push(struct usb_hcd *hcd,
+				 struct usbhsh_hpriv *hpriv,
+				 struct usbhs_pipe *pipe,
+				 struct urb *urb)
+{
+	struct device *dev = usbhsh_hcd_to_dev(hcd);
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	/*
+	 * setup stage
+	 *
+	 * usbhsh_send_setup_stage_packet() wait SACK/SIGN
+	 */
+	usbhsh_setup_stage_packet_push(hpriv, urb, pipe);
+
+	/*
+	 * data stage
+	 *
+	 * It is pushed only when urb has buffer.
+	 */
+	if (urb->transfer_buffer_length)
+		usbhsh_data_stage_packet_push(hpriv, urb, pipe);
+
+	/*
+	 * status stage
+	 */
+	usbhsh_status_stage_packet_push(hpriv, urb, pipe);
+
+	/*
+	 * start pushed packets
+	 */
+	usbhs_pkt_start(pipe);
+
+	return 0;
+}
+
+/*
+ *		dma map functions
+ */
+static int usbhsh_dma_map_ctrl(struct usbhs_pkt *pkt, int map)
+{
+	return 0;
+}
+
+/*
+ *		for hc_driver
+ */
+static int usbhsh_host_start(struct usb_hcd *hcd)
+{
+	return 0;
+}
+
+static void usbhsh_host_stop(struct usb_hcd *hcd)
+{
+}
+
+static int usbhsh_urb_enqueue(struct usb_hcd *hcd,
+			      struct urb *urb,
+			      gfp_t mem_flags)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	struct usb_device *usbv = usbhsh_urb_to_usbv(urb);
+	struct usb_host_endpoint *ep = urb->ep;
+	struct usbhsh_request *ureq;
+	struct usbhsh_device *udev, *new_udev = NULL;
+	struct usbhs_pipe *pipe;
+	struct usbhsh_ep *uep;
+
+	int ret;
+
+	dev_dbg(dev, "%s (%s)\n",
+		__func__, usb_pipein(urb->pipe) ? "in" : "out");
+
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (ret)
+		goto usbhsh_urb_enqueue_error_not_linked;
+
+	/*
+	 * get udev
+	 */
+	udev = usbhsh_usbv_to_udev(usbv);
+	if (!udev) {
+		new_udev = usbhsh_device_alloc(hpriv, urb);
+		if (!new_udev)
+			goto usbhsh_urb_enqueue_error_not_linked;
+
+		udev = new_udev;
+	}
+
+	/*
+	 * get uep
+	 */
+	uep = usbhsh_ep_to_uep(ep);
+	if (!uep) {
+		uep = usbhsh_endpoint_alloc(hpriv, udev, ep, mem_flags);
+		if (!uep)
+			goto usbhsh_urb_enqueue_error_free_device;
+	}
+	pipe = usbhsh_uep_to_pipe(uep);
+
+	/*
+	 * alloc new request
+	 */
+	ureq = usbhsh_req_alloc(hpriv, urb, mem_flags);
+	if (unlikely(!ureq)) {
+		ret = -ENOMEM;
+		goto usbhsh_urb_enqueue_error_free_endpoint;
+	}
+	usbhsh_urb_to_ureq(urb) = ureq;
+
+	/*
+	 * push packet
+	 */
+	if (usb_pipecontrol(urb->pipe))
+		usbhsh_dcp_queue_push(hcd, hpriv, pipe, urb);
+	else
+		usbhsh_queue_push(hcd, pipe, urb);
+
+	return 0;
+
+usbhsh_urb_enqueue_error_free_endpoint:
+	usbhsh_endpoint_free(hpriv, ep);
+usbhsh_urb_enqueue_error_free_device:
+	if (new_udev)
+		usbhsh_device_free(hpriv, new_udev);
+usbhsh_urb_enqueue_error_not_linked:
+
+	dev_dbg(dev, "%s error\n", __func__);
+
+	return ret;
+}
+
+static int usbhsh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
+	struct usbhsh_request *ureq = usbhsh_urb_to_ureq(urb);
+
+	if (ureq) {
+		usbhsh_req_free(hpriv, ureq);
+		usbhsh_urb_to_ureq(urb) = NULL;
+	}
+
+	return 0;
+}
+
+static void usbhsh_endpoint_disable(struct usb_hcd *hcd,
+				    struct usb_host_endpoint *ep)
+{
+	struct usbhsh_ep *uep = usbhsh_ep_to_uep(ep);
+	struct usbhsh_device *udev;
+	struct usbhsh_hpriv *hpriv;
+
+	/*
+	 * this function might be called manytimes by same hcd/ep
+	 * in-endpoitn == out-endpoint if ep == dcp.
+	 */
+	if (!uep)
+		return;
+
+	udev	= usbhsh_uep_to_udev(uep);
+	hpriv	= usbhsh_hcd_to_hpriv(hcd);
+
+	usbhsh_endpoint_free(hpriv, ep);
+	ep->hcpriv = NULL;
+
+	/*
+	 * if there is no endpoint,
+	 * free device
+	 */
+	if (!usbhsh_device_has_endpoint(udev))
+		usbhsh_device_free(hpriv, udev);
+}
+
+static int usbhsh_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int roothub_id = 1; /* only 1 root hub */
+
+	/*
+	 * does port stat was changed ?
+	 * check USB_PORT_STAT_C_xxx << 16
+	 */
+	if (usbhsh_port_stat_get(hpriv) & 0xFFFF0000)
+		*buf = (1 << roothub_id);
+	else
+		*buf = 0;
+
+	dev_dbg(dev, "%s (%02x)\n", __func__, *buf);
+
+	return !!(*buf);
+}
+
+static int __usbhsh_hub_hub_feature(struct usbhsh_hpriv *hpriv,
+				    u16 typeReq, u16 wValue,
+				    u16 wIndex, char *buf, u16 wLength)
+{
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	switch (wValue) {
+	case C_HUB_OVER_CURRENT:
+	case C_HUB_LOCAL_POWER:
+		dev_dbg(dev, "%s :: C_HUB_xx\n", __func__);
+		return 0;
+	}
+
+	return -EPIPE;
+}
+
+static int __usbhsh_hub_port_feature(struct usbhsh_hpriv *hpriv,
+				     u16 typeReq, u16 wValue,
+				     u16 wIndex, char *buf, u16 wLength)
+{
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int enable = (typeReq == SetPortFeature);
+	int speed, i, timeout = 128;
+	int roothub_id = 1; /* only 1 root hub */
+
+	/* common error */
+	if (wIndex > roothub_id || wLength != 0)
+		return -EPIPE;
+
+	/* check wValue */
+	switch (wValue) {
+	case USB_PORT_FEAT_POWER:
+		usbhs_vbus_ctrl(priv, enable);
+		dev_dbg(dev, "%s :: USB_PORT_FEAT_POWER\n", __func__);
+		break;
+
+	case USB_PORT_FEAT_ENABLE:
+	case USB_PORT_FEAT_SUSPEND:
+	case USB_PORT_FEAT_C_ENABLE:
+	case USB_PORT_FEAT_C_SUSPEND:
+	case USB_PORT_FEAT_C_CONNECTION:
+	case USB_PORT_FEAT_C_OVER_CURRENT:
+	case USB_PORT_FEAT_C_RESET:
+		dev_dbg(dev, "%s :: USB_PORT_FEAT_xxx\n", __func__);
+		break;
+
+	case USB_PORT_FEAT_RESET:
+		if (!enable)
+			break;
+
+		usbhsh_port_stat_clear(hpriv,
+				       USB_PORT_STAT_HIGH_SPEED |
+				       USB_PORT_STAT_LOW_SPEED);
+
+		usbhs_bus_send_reset(priv);
+		msleep(20);
+		usbhs_bus_send_sof_enable(priv);
+
+		for (i = 0; i < timeout ; i++) {
+			switch (usbhs_bus_get_speed(priv)) {
+			case USB_SPEED_LOW:
+				speed = USB_PORT_STAT_LOW_SPEED;
+				goto got_usb_bus_speed;
+			case USB_SPEED_HIGH:
+				speed = USB_PORT_STAT_HIGH_SPEED;
+				goto got_usb_bus_speed;
+			case USB_SPEED_FULL:
+				speed = 0;
+				goto got_usb_bus_speed;
+			}
+
+			msleep(20);
+		}
+		return -EPIPE;
+
+got_usb_bus_speed:
+		usbhsh_port_stat_set(hpriv, speed);
+		usbhsh_port_stat_set(hpriv, USB_PORT_STAT_ENABLE);
+
+		dev_dbg(dev, "%s :: USB_PORT_FEAT_RESET (speed = %d)\n",
+			__func__, speed);
+
+		/* status change is not needed */
+		return 0;
+
+	default:
+		return -EPIPE;
+	}
+
+	/* set/clear status */
+	if (enable)
+		usbhsh_port_stat_set(hpriv, (1 << wValue));
+	else
+		usbhsh_port_stat_clear(hpriv, (1 << wValue));
+
+	return 0;
+}
+
+static int __usbhsh_hub_get_status(struct usbhsh_hpriv *hpriv,
+				   u16 typeReq, u16 wValue,
+				   u16 wIndex, char *buf, u16 wLength)
+{
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct usb_hub_descriptor *desc = (struct usb_hub_descriptor *)buf;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int roothub_id = 1; /* only 1 root hub */
+
+	switch (typeReq) {
+	case GetHubStatus:
+		dev_dbg(dev, "%s :: GetHubStatus\n", __func__);
+
+		*buf = 0x00;
+		break;
+
+	case GetPortStatus:
+		if (wIndex != roothub_id)
+			return -EPIPE;
+
+		dev_dbg(dev, "%s :: GetPortStatus\n", __func__);
+		*(__le32 *)buf = cpu_to_le32(usbhsh_port_stat_get(hpriv));
+		break;
+
+	case GetHubDescriptor:
+		desc->bDescriptorType		= 0x29;
+		desc->bHubContrCurrent		= 0;
+		desc->bNbrPorts			= roothub_id;
+		desc->bDescLength		= 9;
+		desc->bPwrOn2PwrGood		= 0;
+		desc->wHubCharacteristics	= cpu_to_le16(0x0011);
+		desc->u.hs.DeviceRemovable[0]	= (roothub_id << 1);
+		desc->u.hs.DeviceRemovable[1]	= ~0;
+		dev_dbg(dev, "%s :: GetHubDescriptor\n", __func__);
+		break;
+	}
+
+	return 0;
+}
+
+static int usbhsh_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+			      u16 wIndex, char *buf, u16 wLength)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
+	struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int ret = -EPIPE;
+
+	switch (typeReq) {
+
+	/* Hub Feature */
+	case ClearHubFeature:
+	case SetHubFeature:
+		ret = __usbhsh_hub_hub_feature(hpriv, typeReq,
+					       wValue, wIndex, buf, wLength);
+		break;
+
+	/* Port Feature */
+	case SetPortFeature:
+	case ClearPortFeature:
+		ret = __usbhsh_hub_port_feature(hpriv, typeReq,
+						wValue, wIndex, buf, wLength);
+		break;
+
+	/* Get status */
+	case GetHubStatus:
+	case GetPortStatus:
+	case GetHubDescriptor:
+		ret = __usbhsh_hub_get_status(hpriv, typeReq,
+					      wValue, wIndex, buf, wLength);
+		break;
+	}
+
+	dev_dbg(dev, "typeReq = %x, ret = %d, port_stat = %x\n",
+		typeReq, ret, usbhsh_port_stat_get(hpriv));
+
+	return ret;
+}
+
+static struct hc_driver usbhsh_driver = {
+	.description =		usbhsh_hcd_name,
+	.hcd_priv_size =	sizeof(struct usbhsh_hpriv),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.flags =		HCD_USB2,
+
+	.start =		usbhsh_host_start,
+	.stop =			usbhsh_host_stop,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		usbhsh_urb_enqueue,
+	.urb_dequeue =		usbhsh_urb_dequeue,
+	.endpoint_disable =	usbhsh_endpoint_disable,
+
+	/*
+	 * root hub
+	 */
+	.hub_status_data =	usbhsh_hub_status_data,
+	.hub_control =		usbhsh_hub_control,
+};
+
+/*
+ *		interrupt functions
+ */
+static int usbhsh_irq_attch(struct usbhs_priv *priv,
+			    struct usbhs_irq_state *irq_state)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	dev_dbg(dev, "device attached\n");
+
+	usbhsh_port_stat_set(hpriv, USB_PORT_STAT_CONNECTION);
+	usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16);
+
+	return 0;
+}
+
+static int usbhsh_irq_dtch(struct usbhs_priv *priv,
+			   struct usbhs_irq_state *irq_state)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	dev_dbg(dev, "device detached\n");
+
+	usbhsh_port_stat_clear(hpriv, USB_PORT_STAT_CONNECTION);
+	usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16);
+
+	return 0;
+}
+
+static int usbhsh_irq_setup_ack(struct usbhs_priv *priv,
+				struct usbhs_irq_state *irq_state)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	dev_dbg(dev, "setup packet OK\n");
+
+	if (unlikely(!hpriv->done))
+		dev_err(dev, "setup ack happen without necessary data\n");
+	else
+		complete(hpriv->done); /* see usbhsh_urb_enqueue() */
+
+	return 0;
+}
+
+static int usbhsh_irq_setup_err(struct usbhs_priv *priv,
+				struct usbhs_irq_state *irq_state)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	dev_dbg(dev, "setup packet Err\n");
+
+	if (unlikely(!hpriv->done))
+		dev_err(dev, "setup err happen without necessary data\n");
+	else
+		complete(hpriv->done); /* see usbhsh_urb_enqueue() */
+
+	return 0;
+}
+
+/*
+ *		module start/stop
+ */
+static void usbhsh_pipe_init_for_host(struct usbhs_priv *priv)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct usbhsh_pipe_info *pipe_info = hpriv->pipe_info;
+	struct usbhs_pipe *pipe;
+	u32 *pipe_type = usbhs_get_dparam(priv, pipe_type);
+	int pipe_size = usbhs_get_dparam(priv, pipe_size);
+	int old_type, dir_in, i;
+
+	/* init all pipe */
+	old_type = USB_ENDPOINT_XFER_CONTROL;
+	for (i = 0; i < pipe_size; i++) {
+		pipe_info[i].usr_cnt	= 0;
+
+		/*
+		 * data "output" will be finished as soon as possible,
+		 * but there is no guaranty at data "input" case.
+		 *
+		 * "input" needs "standby" pipe.
+		 * So, "input" direction pipe > "output" direction pipe
+		 * is good idea.
+		 *
+		 * 1st USB_ENDPOINT_XFER_xxx will be output direction,
+		 * and the other will be input direction here.
+		 *
+		 * ex)
+		 * ...
+		 * USB_ENDPOINT_XFER_ISOC -> dir out
+		 * USB_ENDPOINT_XFER_ISOC -> dir in
+		 * USB_ENDPOINT_XFER_BULK -> dir out
+		 * USB_ENDPOINT_XFER_BULK -> dir in
+		 * USB_ENDPOINT_XFER_BULK -> dir in
+		 * ...
+		 */
+		dir_in = (pipe_type[i] == old_type);
+		old_type = pipe_type[i];
+
+		if (USB_ENDPOINT_XFER_CONTROL == pipe_type[i]) {
+			pipe = usbhs_dcp_malloc(priv);
+			usbhsh_hpriv_to_dcp(hpriv) = pipe;
+		} else {
+			pipe = usbhs_pipe_malloc(priv,
+						 pipe_type[i],
+						 dir_in);
+		}
+
+		pipe->mod_private = pipe_info + i;
+	}
+}
+
+static int usbhsh_start(struct usbhs_priv *priv)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int ret;
+
+	/* add hcd */
+	ret = usb_add_hcd(hcd, 0, 0);
+	if (ret < 0)
+		return 0;
+
+	/*
+	 * pipe initialize and enable DCP
+	 */
+	usbhs_pipe_init(priv,
+			usbhsh_dma_map_ctrl);
+	usbhs_fifo_init(priv);
+	usbhsh_pipe_init_for_host(priv);
+
+	/*
+	 * system config enble
+	 * - HI speed
+	 * - host
+	 * - usb module
+	 */
+	usbhs_sys_hispeed_ctrl(priv, 1);
+	usbhs_sys_host_ctrl(priv, 1);
+	usbhs_sys_usb_ctrl(priv, 1);
+
+	/*
+	 * enable irq callback
+	 */
+	mod->irq_attch		= usbhsh_irq_attch;
+	mod->irq_dtch		= usbhsh_irq_dtch;
+	mod->irq_sack		= usbhsh_irq_setup_ack;
+	mod->irq_sign		= usbhsh_irq_setup_err;
+	usbhs_irq_callback_update(priv, mod);
+
+	dev_dbg(dev, "start host\n");
+
+	return ret;
+}
+
+static int usbhsh_stop(struct usbhs_priv *priv)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	usb_remove_hcd(hcd);
+
+	/* disable sys */
+	usbhs_sys_hispeed_ctrl(priv, 0);
+	usbhs_sys_host_ctrl(priv, 0);
+	usbhs_sys_usb_ctrl(priv, 0);
+
+	dev_dbg(dev, "quit host\n");
+
+	return 0;
+}
+
+int __devinit usbhs_mod_host_probe(struct usbhs_priv *priv)
+{
+	struct usbhsh_hpriv *hpriv;
+	struct usb_hcd *hcd;
+	struct usbhsh_pipe_info *pipe_info;
+	struct usbhsh_device *udev;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int pipe_size = usbhs_get_dparam(priv, pipe_size);
+	int i;
+
+	/* initialize hcd */
+	hcd = usb_create_hcd(&usbhsh_driver, dev, usbhsh_hcd_name);
+	if (!hcd) {
+		dev_err(dev, "Failed to create hcd\n");
+		return -ENOMEM;
+	}
+
+	pipe_info = kzalloc(sizeof(*pipe_info) * pipe_size, GFP_KERNEL);
+	if (!pipe_info) {
+		dev_err(dev, "Could not allocate pipe_info\n");
+		goto usbhs_mod_host_probe_err;
+	}
+
+	/*
+	 * CAUTION
+	 *
+	 * There is no guarantee that it is possible to access usb module here.
+	 * Don't accesses to it.
+	 * The accesse will be enable after "usbhsh_start"
+	 */
+
+	hpriv = usbhsh_hcd_to_hpriv(hcd);
+
+	/*
+	 * register itself
+	 */
+	usbhs_mod_register(priv, &hpriv->mod, USBHS_HOST);
+
+	/* init hpriv */
+	hpriv->mod.name		= "host";
+	hpriv->mod.start	= usbhsh_start;
+	hpriv->mod.stop		= usbhsh_stop;
+	hpriv->pipe_info	= pipe_info;
+	hpriv->pipe_size	= pipe_size;
+	hpriv->done		= NULL;
+	usbhsh_req_list_init(hpriv);
+	usbhsh_port_stat_init(hpriv);
+
+	/* init all device */
+	usbhsh_for_each_udev_with_dev0(udev, hpriv, i) {
+		udev->usbv	= NULL;
+		INIT_LIST_HEAD(&udev->ep_list_head);
+	}
+
+	dev_info(dev, "host probed\n");
+
+	return 0;
+
+usbhs_mod_host_probe_err:
+	usb_put_hcd(hcd);
+
+	return -ENOMEM;
+}
+
+int __devexit usbhs_mod_host_remove(struct usbhs_priv *priv)
+{
+	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
+	struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
+
+	usbhsh_req_list_quit(hpriv);
+
+	usb_put_hcd(hcd);
+
+	return 0;
+}
diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c
index 1b14cae..c74389c 100644
--- a/drivers/usb/renesas_usbhs/pipe.c
+++ b/drivers/usb/renesas_usbhs/pipe.c
@@ -29,9 +29,6 @@
 #define usbhsp_flags_has(p, f)	((p)->flags &   USBHS_PIPE_FLAGS_##f)
 #define usbhsp_flags_init(p)	do {(p)->flags = 0; } while (0)
 
-#define usbhsp_type(p)		((p)->pipe_type)
-#define usbhsp_type_is(p, t)	((p)->pipe_type == t)
-
 /*
  * for debug
  */
@@ -42,28 +39,9 @@ static char *usbhsp_pipe_name[] = {
 	[USB_ENDPOINT_XFER_ISOC]	= "ISO",
 };
 
-/*
- *		usb request functions
- */
-void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
+char *usbhs_pipe_name(struct usbhs_pipe *pipe)
 {
-	u16 val;
-
-	val = usbhs_read(priv, USBREQ);
-	req->bRequest		= (val >> 8) & 0xFF;
-	req->bRequestType	= (val >> 0) & 0xFF;
-
-	req->wValue	= usbhs_read(priv, USBVAL);
-	req->wIndex	= usbhs_read(priv, USBINDX);
-	req->wLength	= usbhs_read(priv, USBLENG);
-}
-
-void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
-{
-	usbhs_write(priv, USBREQ,  (req->bRequest << 8) | req->bRequestType);
-	usbhs_write(priv, USBVAL,  req->wValue);
-	usbhs_write(priv, USBINDX, req->wIndex);
-	usbhs_write(priv, USBLENG, req->wLength);
+	return usbhsp_pipe_name[usbhs_pipe_type(pipe)];
 }
 
 /*
@@ -106,17 +84,6 @@ static void __usbhsp_pipe_xxx_set(struct usbhs_pipe *pipe,
 		usbhs_bset(priv, pipe_reg, mask, val);
 }
 
-static u16 __usbhsp_pipe_xxx_get(struct usbhs_pipe *pipe,
-				 u16 dcp_reg, u16 pipe_reg)
-{
-	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
-
-	if (usbhs_pipe_is_dcp(pipe))
-		return usbhs_read(priv, dcp_reg);
-	else
-		return usbhs_read(priv, pipe_reg);
-}
-
 /*
  *		DCPCFG/PIPECFG functions
  */
@@ -144,11 +111,6 @@ static void usbhsp_pipe_maxp_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
 	__usbhsp_pipe_xxx_set(pipe, DCPMAXP, PIPEMAXP, mask, val);
 }
 
-static u16 usbhsp_pipe_maxp_get(struct usbhs_pipe *pipe)
-{
-	return __usbhsp_pipe_xxx_get(pipe, DCPMAXP, PIPEMAXP);
-}
-
 /*
  *		pipe control functions
  */
@@ -303,16 +265,16 @@ static int usbhsp_possible_double_buffer(struct usbhs_pipe *pipe)
 	/*
 	 * only ISO / BULK pipe can use double buffer
 	 */
-	if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_BULK) ||
-	    usbhsp_type_is(pipe, USB_ENDPOINT_XFER_ISOC))
+	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK) ||
+	    usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC))
 		return 1;
 
 	return 0;
 }
 
 static u16 usbhsp_setup_pipecfg(struct usbhs_pipe *pipe,
-				const struct usb_endpoint_descriptor *desc,
-				int is_host)
+				int is_host,
+				int dir_in)
 {
 	u16 type = 0;
 	u16 bfre = 0;
@@ -341,40 +303,40 @@ static u16 usbhsp_setup_pipecfg(struct usbhs_pipe *pipe,
 	 */
 
 	/* TYPE */
-	type = type_array[usbhsp_type(pipe)];
+	type = type_array[usbhs_pipe_type(pipe)];
 
 	/* BFRE */
-	if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_ISOC) ||
-	    usbhsp_type_is(pipe, USB_ENDPOINT_XFER_BULK))
+	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC) ||
+	    usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
 		bfre = 0; /* FIXME */
 
 	/* DBLB */
-	if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_ISOC) ||
-	    usbhsp_type_is(pipe, USB_ENDPOINT_XFER_BULK))
+	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC) ||
+	    usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
 		dblb = (is_double) ? DBLB : 0;
 
 	/* CNTMD */
-	if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_BULK))
+	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
 		cntmd = 0; /* FIXME */
 
 	/* DIR */
-	if (usb_endpoint_dir_in(desc))
+	if (dir_in)
 		usbhsp_flags_set(pipe, IS_DIR_HOST);
 
-	if ((is_host  && usb_endpoint_dir_out(desc)) ||
-	    (!is_host && usb_endpoint_dir_in(desc)))
+	if ((is_host  && !dir_in) ||
+	    (!is_host && dir_in))
 		dir |= DIR_OUT;
 
 	if (!dir)
 		usbhsp_flags_set(pipe, IS_DIR_IN);
 
 	/* SHTNAK */
-	if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_BULK) &&
+	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK) &&
 	    !dir)
 		shtnak = SHTNAK;
 
 	/* EPNUM */
-	epnum = 0xF & usb_endpoint_num(desc);
+	epnum = 0; /* see usbhs_pipe_config_update() */
 
 	return	type	|
 		bfre	|
@@ -385,19 +347,7 @@ static u16 usbhsp_setup_pipecfg(struct usbhs_pipe *pipe,
 		epnum;
 }
 
-static u16 usbhsp_setup_pipemaxp(struct usbhs_pipe *pipe,
-				 const struct usb_endpoint_descriptor *desc,
-				 int is_host)
-{
-	/* host should set DEVSEL */
-
-	/* reutn MXPS */
-	return PIPE_MAXP_MASK & le16_to_cpu(desc->wMaxPacketSize);
-}
-
-static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe,
-				 const struct usb_endpoint_descriptor *desc,
-				 int is_host)
+static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe)
 {
 	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
 	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
@@ -441,9 +391,9 @@ static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe,
 	 * INT :  64 byte
 	 * ISOC: 512 byte
 	 */
-	if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_CONTROL))
+	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_CONTROL))
 		buff_size = 256;
-	else if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_INT))
+	else if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_INT))
 		buff_size = 64;
 	else
 		buff_size = 512;
@@ -453,7 +403,7 @@ static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe,
 
 	/* BUFNMB has been reserved for INT pipe
 	 * see above */
-	if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_INT)) {
+	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_INT)) {
 		bufnmb = pipe_num - 2;
 	} else {
 		bufnmb = info->bufnmb_last;
@@ -473,16 +423,42 @@ static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe,
 		(0xff & bufnmb)		<<  0;
 }
 
+void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel,
+			      u16 epnum, u16 maxp)
+{
+	if (devsel > 0xA) {
+		struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+		struct device *dev = usbhs_priv_to_dev(priv);
+
+		dev_err(dev, "devsel error %d\n", devsel);
+
+		devsel = 0;
+	}
+
+	usbhsp_pipe_barrier(pipe);
+
+	pipe->maxp = maxp;
+
+	usbhsp_pipe_select(pipe);
+	usbhsp_pipe_maxp_set(pipe, 0xFFFF,
+			     (devsel << 12) |
+			     maxp);
+
+	if (!usbhs_pipe_is_dcp(pipe))
+		usbhsp_pipe_cfg_set(pipe,  0x000F, epnum);
+}
+
 /*
  *		pipe control
  */
 int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe)
 {
-	u16 mask = usbhs_pipe_is_dcp(pipe) ? DCP_MAXP_MASK : PIPE_MAXP_MASK;
-
-	usbhsp_pipe_select(pipe);
-
-	return (int)(usbhsp_pipe_maxp_get(pipe) & mask);
+	/*
+	 * see
+	 *	usbhs_pipe_config_update()
+	 *	usbhs_dcp_malloc()
+	 */
+	return pipe->maxp;
 }
 
 int usbhs_pipe_is_dir_in(struct usbhs_pipe *pipe)
@@ -495,9 +471,12 @@ int usbhs_pipe_is_dir_host(struct usbhs_pipe *pipe)
 	return usbhsp_flags_has(pipe, IS_DIR_HOST);
 }
 
-void usbhs_pipe_clear_sequence(struct usbhs_pipe *pipe)
+void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int data)
 {
-	usbhsp_pipectrl_set(pipe, SQCLR, SQCLR);
+	u16 mask = (SQCLR | SQSET);
+	u16 val = (data) ? SQSET : SQCLR;
+
+	usbhsp_pipectrl_set(pipe, mask, val);
 }
 
 void usbhs_pipe_clear(struct usbhs_pipe *pipe)
@@ -516,7 +495,7 @@ static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type)
 	 */
 	pipe = NULL;
 	usbhs_for_each_pipe_with_dcp(pos, priv, i) {
-		if (!usbhsp_type_is(pos, type))
+		if (!usbhs_pipe_type_is(pos, type))
 			continue;
 		if (usbhsp_flags_has(pos, IS_USED))
 			continue;
@@ -538,19 +517,12 @@ static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type)
 }
 
 void usbhs_pipe_init(struct usbhs_priv *priv,
-		     void (*done)(struct usbhs_pkt *pkt),
 		     int (*dma_map_ctrl)(struct usbhs_pkt *pkt, int map))
 {
 	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
-	struct device *dev = usbhs_priv_to_dev(priv);
 	struct usbhs_pipe *pipe;
 	int i;
 
-	if (!done) {
-		dev_err(dev, "no done function\n");
-		return;
-	}
-
 	/*
 	 * FIXME
 	 *
@@ -565,7 +537,7 @@ void usbhs_pipe_init(struct usbhs_priv *priv,
 	 */
 	info->bufnmb_last = 4;
 	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
-		if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_INT))
+		if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_INT))
 			info->bufnmb_last++;
 
 		usbhsp_flags_init(pipe);
@@ -577,24 +549,23 @@ void usbhs_pipe_init(struct usbhs_priv *priv,
 		usbhs_pipe_clear(pipe);
 	}
 
-	info->done = done;
 	info->dma_map_ctrl = dma_map_ctrl;
 }
 
 struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv,
-				     const struct usb_endpoint_descriptor *desc)
+				     int endpoint_type,
+				     int dir_in)
 {
 	struct device *dev = usbhs_priv_to_dev(priv);
-	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
 	struct usbhs_pipe *pipe;
-	int is_host = usbhs_mod_is_host(priv, mod);
+	int is_host = usbhs_mod_is_host(priv);
 	int ret;
-	u16 pipecfg, pipebuf, pipemaxp;
+	u16 pipecfg, pipebuf;
 
-	pipe = usbhsp_get_pipe(priv, usb_endpoint_type(desc));
+	pipe = usbhsp_get_pipe(priv, endpoint_type);
 	if (!pipe) {
 		dev_err(dev, "can't get pipe (%s)\n",
-			usbhsp_pipe_name[usb_endpoint_type(desc)]);
+			usbhsp_pipe_name[endpoint_type]);
 		return NULL;
 	}
 
@@ -609,22 +580,25 @@ struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv,
 		return NULL;
 	}
 
-	pipecfg  = usbhsp_setup_pipecfg(pipe,  desc, is_host);
-	pipebuf  = usbhsp_setup_pipebuff(pipe, desc, is_host);
-	pipemaxp = usbhsp_setup_pipemaxp(pipe, desc, is_host);
+	pipecfg  = usbhsp_setup_pipecfg(pipe, is_host, dir_in);
+	pipebuf  = usbhsp_setup_pipebuff(pipe);
 
 	usbhsp_pipe_select(pipe);
 	usbhsp_pipe_cfg_set(pipe, 0xFFFF, pipecfg);
 	usbhsp_pipe_buf_set(pipe, 0xFFFF, pipebuf);
-	usbhsp_pipe_maxp_set(pipe, 0xFFFF, pipemaxp);
 
-	usbhs_pipe_clear_sequence(pipe);
+	usbhs_pipe_sequence_data0(pipe);
 
 	dev_dbg(dev, "enable pipe %d : %s (%s)\n",
 		usbhs_pipe_number(pipe),
-		usbhsp_pipe_name[usb_endpoint_type(desc)],
+		usbhs_pipe_name(pipe),
 		usbhs_pipe_is_dir_in(pipe) ? "in" : "out");
 
+	/*
+	 * epnum / maxp are still not set to this pipe.
+	 * call usbhs_pipe_config_update() after this function !!
+	 */
+
 	return pipe;
 }
 
@@ -651,25 +625,31 @@ struct usbhs_pipe *usbhs_dcp_malloc(struct usbhs_priv *priv)
 	if (!pipe)
 		return NULL;
 
+	INIT_LIST_HEAD(&pipe->list);
+
 	/*
-	 * dcpcfg  : default
-	 * dcpmaxp : default
-	 * pipebuf : nothing to do
+	 * call usbhs_pipe_config_update() after this function !!
 	 */
 
-	usbhsp_pipe_select(pipe);
-	usbhs_pipe_clear_sequence(pipe);
-	INIT_LIST_HEAD(&pipe->list);
-
 	return pipe;
 }
 
 void usbhs_dcp_control_transfer_done(struct usbhs_pipe *pipe)
 {
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+
 	WARN_ON(!usbhs_pipe_is_dcp(pipe));
 
 	usbhs_pipe_enable(pipe);
-	usbhsp_pipectrl_set(pipe, CCPL, CCPL);
+
+	if (!usbhs_mod_is_host(priv)) /* funconly */
+		usbhsp_pipectrl_set(pipe, CCPL, CCPL);
+}
+
+void usbhs_dcp_dir_for_host(struct usbhs_pipe *pipe, int dir_out)
+{
+	usbhsp_pipe_cfg_set(pipe, DIR_OUT,
+			    dir_out ? DIR_OUT : 0);
 }
 
 /*
@@ -703,7 +683,9 @@ int usbhs_pipe_probe(struct usbhs_priv *priv)
 	 */
 	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
 		pipe->priv = priv;
-		usbhsp_type(pipe) = pipe_type[i] & USB_ENDPOINT_XFERTYPE_MASK;
+
+		usbhs_pipe_type(pipe) =
+			pipe_type[i] & USB_ENDPOINT_XFERTYPE_MASK;
 
 		dev_dbg(dev, "pipe %x\t: %s\n",
 			i, usbhsp_pipe_name[pipe_type[i]]);
diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h
index 41534cb..6334fc6 100644
--- a/drivers/usb/renesas_usbhs/pipe.h
+++ b/drivers/usb/renesas_usbhs/pipe.h
@@ -30,11 +30,15 @@ struct usbhs_pipe {
 	struct usbhs_fifo *fifo;
 	struct list_head list;
 
+	int maxp;
+
 	u32 flags;
 #define USBHS_PIPE_FLAGS_IS_USED		(1 << 0)
 #define USBHS_PIPE_FLAGS_IS_DIR_IN		(1 << 1)
 #define USBHS_PIPE_FLAGS_IS_DIR_HOST		(1 << 2)
 
+	struct usbhs_pkt_handle *handler;
+
 	void *mod_private;
 };
 
@@ -43,7 +47,6 @@ struct usbhs_pipe_info {
 	int size;	/* array size of "pipe" */
 	int bufnmb_last;	/* FIXME : driver needs good allocator */
 
-	void (*done)(struct usbhs_pkt *pkt);
 	int (*dma_map_ctrl)(struct usbhs_pkt *pkt, int map);
 };
 
@@ -67,32 +70,30 @@ struct usbhs_pipe_info {
 #define usbhs_priv_to_pipeinfo(pr)	(&(pr)->pipe_info)
 
 /*
- * usb request
- */
-void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req);
-void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req);
-
-/*
  * pipe control
  */
+char *usbhs_pipe_name(struct usbhs_pipe *pipe);
 struct usbhs_pipe
-*usbhs_pipe_malloc(struct usbhs_priv *priv,
-		   const struct usb_endpoint_descriptor *desc);
+*usbhs_pipe_malloc(struct usbhs_priv *priv, int endpoint_type, int dir_in);
 int usbhs_pipe_probe(struct usbhs_priv *priv);
 void usbhs_pipe_remove(struct usbhs_priv *priv);
 int usbhs_pipe_is_dir_in(struct usbhs_pipe *pipe);
 int usbhs_pipe_is_dir_host(struct usbhs_pipe *pipe);
 void usbhs_pipe_init(struct usbhs_priv *priv,
-		     void (*done)(struct usbhs_pkt *pkt),
 		     int (*dma_map_ctrl)(struct usbhs_pkt *pkt, int map));
 int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe);
-void usbhs_pipe_clear_sequence(struct usbhs_pipe *pipe);
 void usbhs_pipe_clear(struct usbhs_pipe *pipe);
 int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe);
 void usbhs_pipe_enable(struct usbhs_pipe *pipe);
 void usbhs_pipe_disable(struct usbhs_pipe *pipe);
 void usbhs_pipe_stall(struct usbhs_pipe *pipe);
 void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo);
+void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel,
+			      u16 epnum, u16 maxp);
+
+#define usbhs_pipe_sequence_data0(pipe)	usbhs_pipe_data_sequence(pipe, 0)
+#define usbhs_pipe_sequence_data1(pipe)	usbhs_pipe_data_sequence(pipe, 1)
+void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int data);
 
 #define usbhs_pipe_to_priv(p)	((p)->priv)
 #define usbhs_pipe_number(p)	(int)((p) - (p)->priv->pipe_info.pipe)
@@ -100,10 +101,14 @@ void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo);
 #define usbhs_pipe_to_fifo(p)	((p)->fifo)
 #define usbhs_pipe_is_busy(p)	usbhs_pipe_to_fifo(p)
 
+#define usbhs_pipe_type(p)		((p)->pipe_type)
+#define usbhs_pipe_type_is(p, t)	((p)->pipe_type == t)
+
 /*
  * dcp control
  */
 struct usbhs_pipe *usbhs_dcp_malloc(struct usbhs_priv *priv);
 void usbhs_dcp_control_transfer_done(struct usbhs_pipe *pipe);
+void usbhs_dcp_dir_for_host(struct usbhs_pipe *pipe, int dir_out);
 
 #endif /* RENESAS_USB_PIPE_H */
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index b71e309..677f577 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -252,6 +252,7 @@ config USB_SERIAL_GARMIN
 
 config USB_SERIAL_IPW
         tristate "USB IPWireless (3G UMTS TDD) Driver"
+	select USB_SERIAL_WWAN
 	help
 	  Say Y here if you want to use a IPWireless USB modem such as
 	  the ones supplied by Axity3G/Sentech South Africa.
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 5fc13e7..8fe034d 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -73,6 +73,7 @@ struct ftdi_private {
 				 */
 	int flags;		/* some ASYNC_xxxx flags are supported */
 	unsigned long last_dtr_rts;	/* saved modem control outputs */
+	struct async_icount	icount;
 	wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
 	char prev_status, diff_status;        /* Used for TIOCMIWAIT */
 	char transmit_empty;	/* If transmitter is empty or not */
@@ -207,6 +208,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_XF_640_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_XF_642_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_URBAN_0_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_URBAN_1_PID) },
 	{ USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_0_PID) },
@@ -745,6 +748,8 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
@@ -885,6 +890,8 @@ static void ftdi_set_termios(struct tty_struct *tty,
 static int  ftdi_tiocmget(struct tty_struct *tty);
 static int  ftdi_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear);
+static int ftdi_get_icount(struct tty_struct *tty,
+			   struct serial_icounter_struct *icount);
 static int  ftdi_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg);
 static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
@@ -919,6 +926,7 @@ static struct usb_serial_driver ftdi_sio_device = {
 	.prepare_write_buffer =	ftdi_prepare_write_buffer,
 	.tiocmget =		ftdi_tiocmget,
 	.tiocmset =		ftdi_tiocmset,
+	.get_icount =           ftdi_get_icount,
 	.ioctl =		ftdi_ioctl,
 	.set_termios =		ftdi_set_termios,
 	.break_ctl =		ftdi_break_ctl,
@@ -1486,7 +1494,7 @@ static void ftdi_set_max_packet_size(struct usb_serial_port *port)
 	}
 
 	/* set max packet size based on descriptor */
-	priv->max_packet_size = le16_to_cpu(ep_desc->wMaxPacketSize);
+	priv->max_packet_size = usb_endpoint_maxp(ep_desc);
 
 	dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size);
 }
@@ -1646,6 +1654,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 
 	kref_init(&priv->kref);
 	mutex_init(&priv->cfg_lock);
+	memset(&priv->icount, 0x00, sizeof(priv->icount));
 	init_waitqueue_head(&priv->delta_msr_wait);
 
 	priv->flags = ASYNC_LOW_LATENCY;
@@ -1909,6 +1918,7 @@ static int ftdi_prepare_write_buffer(struct usb_serial_port *port,
 			c = kfifo_out(&port->write_fifo, &buffer[i + 1], len);
 			if (!c)
 				break;
+			priv->icount.tx += c;
 			buffer[i] = (c << 2) + 1;
 			count += c + 1;
 		}
@@ -1916,6 +1926,7 @@ static int ftdi_prepare_write_buffer(struct usb_serial_port *port,
 	} else {
 		count = kfifo_out_locked(&port->write_fifo, dest, size,
 								&port->lock);
+		priv->icount.tx += count;
 	}
 
 	return count;
@@ -1943,6 +1954,14 @@ static int ftdi_process_packet(struct tty_struct *tty,
 	   N.B. packet may be processed more than once, but differences
 	   are only processed once.  */
 	status = packet[0] & FTDI_STATUS_B0_MASK;
+	if (status & FTDI_RS0_CTS)
+		priv->icount.cts++;
+	if (status & FTDI_RS0_DSR)
+		priv->icount.dsr++;
+	if (status & FTDI_RS0_RI)
+		priv->icount.rng++;
+	if (status & FTDI_RS0_RLSD)
+		priv->icount.dcd++;
 	if (status != priv->prev_status) {
 		priv->diff_status |= status ^ priv->prev_status;
 		wake_up_interruptible(&priv->delta_msr_wait);
@@ -1955,15 +1974,20 @@ static int ftdi_process_packet(struct tty_struct *tty,
 		 * over framing errors */
 		if (packet[1] & FTDI_RS_BI) {
 			flag = TTY_BREAK;
+			priv->icount.brk++;
 			usb_serial_handle_break(port);
 		} else if (packet[1] & FTDI_RS_PE) {
 			flag = TTY_PARITY;
+			priv->icount.parity++;
 		} else if (packet[1] & FTDI_RS_FE) {
 			flag = TTY_FRAME;
+			priv->icount.frame++;
 		}
 		/* Overrun is special, not associated with a char */
-		if (packet[1] & FTDI_RS_OE)
+		if (packet[1] & FTDI_RS_OE) {
+			priv->icount.overrun++;
 			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+		}
 	}
 
 	/* save if the transmitter is empty or not */
@@ -1975,6 +1999,7 @@ static int ftdi_process_packet(struct tty_struct *tty,
 	len -= 2;
 	if (!len)
 		return 0;	/* status only */
+	priv->icount.rx += len;
 	ch = packet + 2;
 
 	if (port->port.console && port->sysrq) {
@@ -2277,11 +2302,34 @@ static int ftdi_tiocmset(struct tty_struct *tty,
 	return update_mctrl(port, set, clear);
 }
 
+static int ftdi_get_icount(struct tty_struct *tty,
+				struct serial_icounter_struct *icount)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct async_icount *ic = &priv->icount;
+
+	icount->cts = ic->cts;
+	icount->dsr = ic->dsr;
+	icount->rng = ic->rng;
+	icount->dcd = ic->dcd;
+	icount->tx = ic->tx;
+	icount->rx = ic->rx;
+	icount->frame = ic->frame;
+	icount->parity = ic->parity;
+	icount->overrun = ic->overrun;
+	icount->brk = ic->brk;
+	icount->buf_overrun = ic->buf_overrun;
+	return 0;
+}
+
 static int ftdi_ioctl(struct tty_struct *tty,
 					unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct async_icount cnow;
+	struct async_icount cprev;
 
 	dbg("%s cmd 0x%04x", __func__, cmd);
 
@@ -2301,41 +2349,30 @@ static int ftdi_ioctl(struct tty_struct *tty,
 	 * - mask passed in arg for lines of interest
 	 *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
 	 * Caller should use TIOCGICOUNT to see which one it was.
-	 * (except that the driver doesn't support it !)
 	 *
 	 * This code is borrowed from linux/drivers/char/serial.c
 	 */
 	case TIOCMIWAIT:
-		while (priv != NULL) {
+		cprev = priv->icount;
+		while (1) {
 			interruptible_sleep_on(&priv->delta_msr_wait);
 			/* see if a signal did it */
 			if (signal_pending(current))
 				return -ERESTARTSYS;
-			else {
-				char diff = priv->diff_status;
-
-				if (diff == 0)
-					return -EIO; /* no change => error */
-
-				/* Consume all events */
-				priv->diff_status = 0;
-
-				/* Return 0 if caller wanted to know about
-				   these bits */
-				if (((arg & TIOCM_RNG) && (diff & FTDI_RS0_RI)) ||
-				    ((arg & TIOCM_DSR) && (diff & FTDI_RS0_DSR)) ||
-				    ((arg & TIOCM_CD)  && (diff & FTDI_RS0_RLSD)) ||
-				    ((arg & TIOCM_CTS) && (diff & FTDI_RS0_CTS))) {
-					return 0;
-				}
-				/*
-				 * Otherwise caller can't care less about what
-				 * happened,and so we continue to wait for more
-				 * events.
-				 */
+			cnow = priv->icount;
+			if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
+			    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
+				return -EIO; /* no change => error */
+			if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+			    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+			    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
+			    ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
+				return 0;
 			}
+			cprev = cnow;
 		}
-		return 0;
+		/* not reached */
+		break;
 	case TIOCSERGETLSR:
 		return get_lsr_info(port, (struct serial_struct __user *)arg);
 		break;
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index bf5227a..571fa96 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -54,6 +54,7 @@
 /* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
 #define LMI_LM3S_DEVEL_BOARD_PID	0xbcd8
 #define LMI_LM3S_EVAL_BOARD_PID		0xbcd9
+#define LMI_LM3S_ICDI_BOARD_PID		0xbcda
 
 #define FTDI_TURTELIZER_PID	0xBDC8 /* JTAG/RS-232 adapter by egnite GmbH */
 
@@ -420,9 +421,11 @@
 #define PROTEGO_SPECIAL_4	0xFC73	/* special/unknown device */
 
 /*
- * DSS-20 Sync Station for Sony Ericsson P800
+ * Sony Ericsson product ids
  */
-#define FTDI_DSS20_PID          0xFC82
+#define FTDI_DSS20_PID		0xFC82	/* DSS-20 Sync Station for Sony Ericsson P800 */
+#define FTDI_URBAN_0_PID	0xFC8A	/* Sony Ericsson Urban, uart #0 */
+#define FTDI_URBAN_1_PID	0xFC8B	/* Sony Ericsson Urban, uart #1 */
 
 /* www.irtrans.de device */
 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index abf095b..2ee8075 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -3042,7 +3042,7 @@ static int edge_startup(struct usb_serial *serial)
 
 			endpoint = &serial->interface->altsetting[0].
 							endpoint[i].desc;
-			buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+			buffer_size = usb_endpoint_maxp(endpoint);
 			if (!interrupt_in_found &&
 			    (usb_endpoint_is_int_in(endpoint))) {
 				/* we found a interrupt in endpoint */
@@ -3107,7 +3107,7 @@ static int edge_startup(struct usb_serial *serial)
 					usb_rcvbulkpipe(dev,
 						endpoint->bEndpointAddress),
 					edge_serial->bulk_in_buffer,
-					le16_to_cpu(endpoint->wMaxPacketSize),
+					usb_endpoint_maxp(endpoint),
 					edge_bulk_in_callback,
 					edge_serial);
 				bulk_in_found = true;
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index ca77e88..5170799 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -47,6 +47,7 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include <linux/uaccess.h>
+#include "usb-wwan.h"
 
 /*
  * Version Information
@@ -185,7 +186,7 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	/*--2: Start reading from the device */
 	dbg("%s: setting up bulk read callback", __func__);
-	usb_serial_generic_open(tty, port);
+	usb_wwan_open(tty, port);
 
 	/*--3: Tell the modem to open the floodgates on the rx bulk channel */
 	dbg("%s:asking modem for RxRead (RXBULK_ON)", __func__);
@@ -219,6 +220,29 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)
 	return 0;
 }
 
+/* fake probe - only to allocate data structures */
+static int ipw_probe(struct usb_serial *serial, const struct usb_device_id *id)
+{
+	struct usb_wwan_intf_private *data;
+
+	data = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	spin_lock_init(&data->susp_lock);
+	usb_set_serial_data(serial, data);
+	return 0;
+}
+
+static void ipw_release(struct usb_serial *serial)
+{
+	struct usb_wwan_intf_private *data = usb_get_serial_data(serial);
+
+	usb_wwan_release(serial);
+	usb_set_serial_data(serial, NULL);
+	kfree(data);
+}
+
 static void ipw_dtr_rts(struct usb_serial_port *port, int on)
 {
 	struct usb_device *dev = port->serial->dev;
@@ -285,7 +309,7 @@ static void ipw_close(struct usb_serial_port *port)
 		dev_err(&port->dev,
 			"Disabling bulk RxRead failed (error = %d)\n", result);
 
-	usb_serial_generic_close(port);
+	usb_wwan_close(port);
 }
 
 static struct usb_serial_driver ipw_device = {
@@ -297,9 +321,14 @@ static struct usb_serial_driver ipw_device = {
 	.usb_driver =		&usb_ipw_driver,
 	.id_table =		usb_ipw_ids,
 	.num_ports =		1,
+	.disconnect =		usb_wwan_disconnect,
 	.open =			ipw_open,
 	.close =		ipw_close,
+	.probe =		ipw_probe,
+	.attach =		usb_wwan_startup,
+	.release =		ipw_release,
 	.dtr_rts =		ipw_dtr_rts,
+	.write =		usb_wwan_write,
 };
 
 
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 96423f3..c248a91 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -523,7 +523,7 @@ static int opticon_startup(struct usb_serial *serial)
 			goto error;
 		}
 
-		priv->buffer_size = le16_to_cpu(endpoint->wMaxPacketSize) * 2;
+		priv->buffer_size = usb_endpoint_maxp(endpoint) * 2;
 		priv->bulk_in_buffer = kmalloc(priv->buffer_size, GFP_KERNEL);
 		if (!priv->bulk_in_buffer) {
 			dev_err(&priv->udev->dev, "out of memory\n");
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index fe22e90..89ae1f6 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -475,31 +475,54 @@ enum option_blacklist_reason {
 		OPTION_BLACKLIST_RESERVED_IF = 2
 };
 
+#define MAX_BL_NUM  8
 struct option_blacklist_info {
-	const u32 infolen;	/* number of interface numbers on blacklist */
-	const u8  *ifaceinfo;	/* pointer to the array holding the numbers */
-	enum option_blacklist_reason reason;
+	/* bitfield of interface numbers for OPTION_BLACKLIST_SENDSETUP */
+	const unsigned long sendsetup;
+	/* bitfield of interface numbers for OPTION_BLACKLIST_RESERVED_IF */
+	const unsigned long reserved;
 };
 
-static const u8 four_g_w14_no_sendsetup[] = { 0, 1 };
 static const struct option_blacklist_info four_g_w14_blacklist = {
-	.infolen = ARRAY_SIZE(four_g_w14_no_sendsetup),
-	.ifaceinfo = four_g_w14_no_sendsetup,
-	.reason = OPTION_BLACKLIST_SENDSETUP
+	.sendsetup = BIT(0) | BIT(1),
 };
 
-static const u8 alcatel_x200_no_sendsetup[] = { 0, 1 };
 static const struct option_blacklist_info alcatel_x200_blacklist = {
-	.infolen = ARRAY_SIZE(alcatel_x200_no_sendsetup),
-	.ifaceinfo = alcatel_x200_no_sendsetup,
-	.reason = OPTION_BLACKLIST_SENDSETUP
+	.sendsetup = BIT(0) | BIT(1),
+};
+
+static const struct option_blacklist_info zte_0037_blacklist = {
+	.sendsetup = BIT(0) | BIT(1),
 };
 
-static const u8 zte_k3765_z_no_sendsetup[] = { 0, 1, 2 };
 static const struct option_blacklist_info zte_k3765_z_blacklist = {
-	.infolen = ARRAY_SIZE(zte_k3765_z_no_sendsetup),
-	.ifaceinfo = zte_k3765_z_no_sendsetup,
-	.reason = OPTION_BLACKLIST_SENDSETUP
+	.sendsetup = BIT(0) | BIT(1) | BIT(2),
+	.reserved = BIT(4),
+};
+
+static const struct option_blacklist_info huawei_cdc12_blacklist = {
+	.reserved = BIT(1) | BIT(2),
+};
+
+static const struct option_blacklist_info net_intf1_blacklist = {
+	.reserved = BIT(1),
+};
+
+static const struct option_blacklist_info net_intf3_blacklist = {
+	.reserved = BIT(3),
+};
+
+static const struct option_blacklist_info net_intf4_blacklist = {
+	.reserved = BIT(4),
+};
+
+static const struct option_blacklist_info net_intf5_blacklist = {
+	.reserved = BIT(5),
+};
+
+static const struct option_blacklist_info zte_mf626_blacklist = {
+	.sendsetup = BIT(0) | BIT(1),
+	.reserved = BIT(4),
 };
 
 static const struct usb_device_id option_ids[] = {
@@ -599,12 +622,15 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) },
@@ -705,7 +731,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0003, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0004, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0005, 0xff, 0xff, 0xff) },
@@ -720,51 +747,62 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000f, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0010, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0011, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0022, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0023, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
 	/* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0026, 0xff, 0xff, 0xff) }, */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff,
-	  0xff, 0xff), .driver_info = (kernel_ulong_t)&four_g_w14_blacklist },
+	  0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_mf626_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0032, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0033, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0034, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0037, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0037, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&zte_0037_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0038, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0039, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0040, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0042, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0042, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0043, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0044, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0048, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0049, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0049, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0050, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	/* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0053, 0xff, 0xff, 0xff) }, */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0056, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0064, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0065, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) },
@@ -779,11 +817,13 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0083, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0086, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0087, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0105, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0106, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0108, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0113, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0113, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0117, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0118, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0121, 0xff, 0xff, 0xff) },
@@ -1214,10 +1254,35 @@ static void __exit option_exit(void)
 module_init(option_init);
 module_exit(option_exit);
 
+static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason,
+			   const struct option_blacklist_info *blacklist)
+{
+	unsigned long num;
+	const unsigned long *intf_list;
+
+	if (blacklist) {
+		if (reason == OPTION_BLACKLIST_SENDSETUP)
+			intf_list = &blacklist->sendsetup;
+		else if (reason == OPTION_BLACKLIST_RESERVED_IF)
+			intf_list = &blacklist->reserved;
+		else {
+			BUG_ON(reason);
+			return false;
+		}
+
+		for_each_set_bit(num, intf_list, MAX_BL_NUM + 1) {
+			if (num == ifnum)
+				return true;
+		}
+	}
+	return false;
+}
+
 static int option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id)
 {
 	struct usb_wwan_intf_private *data;
+
 	/* D-Link DWM 652 still exposes CD-Rom emulation interface in modem mode */
 	if (serial->dev->descriptor.idVendor == DLINK_VENDOR_ID &&
 		serial->dev->descriptor.idProduct == DLINK_PRODUCT_DWM_652 &&
@@ -1230,14 +1295,14 @@ static int option_probe(struct usb_serial *serial,
 		serial->interface->cur_altsetting->desc.bInterfaceClass != 0xff)
 		return -ENODEV;
 
-	/* Don't bind network interfaces on Huawei K3765, K4505 & K4605 */
-	if (serial->dev->descriptor.idVendor == HUAWEI_VENDOR_ID &&
-		(serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K3765 ||
-			serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4505 ||
-			serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4605) &&
-		(serial->interface->cur_altsetting->desc.bInterfaceNumber == 1 ||
-			serial->interface->cur_altsetting->desc.bInterfaceNumber == 2))
-		return -ENODEV;
+	/* Don't bind reserved interfaces (like network ones) which often have
+	 * the same class/subclass/protocol as the serial interfaces.  Look at
+	 * the Windows driver .INF files for reserved interface numbers.
+	 */
+	if (is_blacklisted(
+		serial->interface->cur_altsetting->desc.bInterfaceNumber,
+		OPTION_BLACKLIST_RESERVED_IF,
+		(const struct option_blacklist_info *) id->driver_info))
 
 	/* Don't bind network interface on Samsung GT-B3730, it is handled by a separate module */
 	if (serial->dev->descriptor.idVendor == SAMSUNG_VENDOR_ID &&
@@ -1246,7 +1311,6 @@ static int option_probe(struct usb_serial *serial,
 		return -ENODEV;
 
 	data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
-
 	if (!data)
 		return -ENOMEM;
 	data->send_setup = option_send_setup;
@@ -1255,23 +1319,6 @@ static int option_probe(struct usb_serial *serial,
 	return 0;
 }
 
-static enum option_blacklist_reason is_blacklisted(const u8 ifnum,
-				const struct option_blacklist_info *blacklist)
-{
-	const u8  *info;
-	int i;
-
-	if (blacklist) {
-		info = blacklist->ifaceinfo;
-
-		for (i = 0; i < blacklist->infolen; i++) {
-			if (info[i] == ifnum)
-				return blacklist->reason;
-		}
-	}
-	return OPTION_BLACKLIST_NONE;
-}
-
 static void option_instat_callback(struct urb *urb)
 {
 	int err;
@@ -1343,9 +1390,8 @@ static int option_send_setup(struct usb_serial_port *port)
 	int val = 0;
 	dbg("%s", __func__);
 
-	if (is_blacklisted(ifNum,
-			   (struct option_blacklist_info *) intfdata->private)
-	    == OPTION_BLACKLIST_SENDSETUP) {
+	if (is_blacklisted(ifNum, OPTION_BLACKLIST_SENDSETUP,
+			(struct option_blacklist_info *) intfdata->private)) {
 		dbg("No send_setup on blacklisted interface #%d\n", ifNum);
 		return -EIO;
 	}
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 1d33260..9083d1e 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -92,6 +92,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
 	{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
 	{ USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) },
+	{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
@@ -360,9 +361,6 @@ static void pl2303_set_termios(struct tty_struct *tty,
 				tmp >>= 2;
 				buf[1] <<= 1;
 			}
-			if (tmp > 256) {
-				tmp %= 256;
-			}
 			buf[0] = tmp;
 		}
 	}
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index ca0d237..3d10d7f 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -148,3 +148,8 @@
 /* WinChipHead USB->RS 232 adapter */
 #define WINCHIPHEAD_VENDOR_ID		0x4348
 #define WINCHIPHEAD_USBSER_PRODUCT_ID	0x5523
+
+/* SMART USB Serial Adapter */
+#define SMART_VENDOR_ID	0x0b8c
+#define SMART_PRODUCT_ID	0x2303
+
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index aeccc7f..b9bb247 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -28,6 +28,7 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
 	{USB_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
 	{USB_DEVICE(0x03f0, 0x201d)},	/* HP un2400 Gobi QDL Device */
+	{USB_DEVICE(0x03f0, 0x371d)},	/* HP un2430 Mobile Broadband Module */
 	{USB_DEVICE(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */
 	{USB_DEVICE(0x04da, 0x250c)},	/* Panasonic Gobi QDL device */
 	{USB_DEVICE(0x413c, 0x8172)},	/* Dell Gobi Modem device */
@@ -84,6 +85,7 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x16d8, 0x8002)},	/* CMDTech Gobi 2000 Modem device (VU922) */
 	{USB_DEVICE(0x05c6, 0x9204)},	/* Gobi 2000 QDL device */
 	{USB_DEVICE(0x05c6, 0x9205)},	/* Gobi 2000 Modem device */
+	{USB_DEVICE(0x1199, 0x9013)},	/* Sierra Wireless Gobi 3000 Modem device (MC8355) */
 	{ }				/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index d9457bd..7096f79 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -226,7 +226,7 @@ static int symbol_startup(struct usb_serial *serial)
 			goto error;
 		}
 
-		priv->buffer_size = le16_to_cpu(endpoint->wMaxPacketSize) * 2;
+		priv->buffer_size = usb_endpoint_maxp(endpoint) * 2;
 		priv->int_buffer = kmalloc(priv->buffer_size, GFP_KERNEL);
 		if (!priv->int_buffer) {
 			dev_err(&priv->udev->dev, "out of memory\n");
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 1c03130..cc274fd 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -912,7 +912,7 @@ int usb_serial_probe(struct usb_interface *interface,
 			goto probe_error;
 		}
 		buffer_size = max_t(int, serial->type->bulk_in_size,
-				le16_to_cpu(endpoint->wMaxPacketSize));
+				usb_endpoint_maxp(endpoint));
 		port->bulk_in_size = buffer_size;
 		port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
 		port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
@@ -942,7 +942,7 @@ int usb_serial_probe(struct usb_interface *interface,
 			goto probe_error;
 		buffer_size = serial->type->bulk_out_size;
 		if (!buffer_size)
-			buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+			buffer_size = usb_endpoint_maxp(endpoint);
 		port->bulk_out_size = buffer_size;
 		port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
 		port->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
@@ -990,7 +990,7 @@ int usb_serial_probe(struct usb_interface *interface,
 						"No free urbs available\n");
 				goto probe_error;
 			}
-			buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+			buffer_size = usb_endpoint_maxp(endpoint);
 			port->interrupt_in_endpointAddress =
 						endpoint->bEndpointAddress;
 			port->interrupt_in_buffer = kmalloc(buffer_size,
@@ -1021,7 +1021,7 @@ int usb_serial_probe(struct usb_interface *interface,
 						"No free urbs available\n");
 				goto probe_error;
 			}
-			buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+			buffer_size = usb_endpoint_maxp(endpoint);
 			port->interrupt_out_size = buffer_size;
 			port->interrupt_out_endpointAddress =
 						endpoint->bEndpointAddress;
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index bedc4b9..fe2d803 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -42,7 +42,7 @@ config USB_STORAGE_REALTEK
 
 config REALTEK_AUTOPM
 	bool "Realtek Card Reader autosuspend support"
-	depends on USB_STORAGE_REALTEK && CONFIG_PM_RUNTIME
+	depends on USB_STORAGE_REALTEK && PM_RUNTIME
 	default y
 
 config USB_STORAGE_DATAFAB
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index 6fd1306..0ce5f79 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -292,6 +292,52 @@ static int rts51x_bulk_transport(struct us_data *us, u8 lun,
 	return USB_STOR_TRANSPORT_ERROR;
 }
 
+static int rts51x_bulk_transport_special(struct us_data *us, u8 lun,
+				 u8 *cmd, int cmd_len, u8 *buf, int buf_len,
+				 enum dma_data_direction dir, int *act_len)
+{
+	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+	struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf;
+	int result;
+	unsigned int cswlen;
+	unsigned int cbwlen = US_BULK_CB_WRAP_LEN;
+
+	/* set up the command wrapper */
+	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+	bcb->DataTransferLength = cpu_to_le32(buf_len);
+	bcb->Flags = (dir == DMA_FROM_DEVICE) ? 1 << 7 : 0;
+	bcb->Tag = ++us->tag;
+	bcb->Lun = lun;
+	bcb->Length = cmd_len;
+
+	/* copy the command payload */
+	memset(bcb->CDB, 0, sizeof(bcb->CDB));
+	memcpy(bcb->CDB, cmd, bcb->Length);
+
+	/* send it to out endpoint */
+	result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+				bcb, cbwlen, NULL);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	/* DATA STAGE */
+	/* send/receive data payload, if there is any */
+
+	if (buf && buf_len) {
+		unsigned int pipe = (dir == DMA_FROM_DEVICE) ?
+				us->recv_bulk_pipe : us->send_bulk_pipe;
+		result = usb_stor_bulk_transfer_buf(us, pipe,
+				buf, buf_len, NULL);
+		if (result == USB_STOR_XFER_ERROR)
+			return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	/* get CSW for device status */
+	result = usb_bulk_msg(us->pusb_dev, us->recv_bulk_pipe, bcs,
+			US_BULK_CS_WRAP_LEN, &cswlen, 250);
+	return result;
+}
+
 /* Determine what the maximum LUN supported is */
 static int rts51x_get_max_lun(struct us_data *us)
 {
@@ -319,6 +365,11 @@ static int rts51x_read_mem(struct us_data *us, u16 addr, u8 *data, u16 len)
 {
 	int retval;
 	u8 cmnd[12] = { 0 };
+	u8 *buf;
+
+	buf = kmalloc(len, GFP_NOIO);
+	if (buf == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
 
 	US_DEBUGP("%s, addr = 0x%x, len = %d\n", __func__, addr, len);
 
@@ -330,10 +381,14 @@ static int rts51x_read_mem(struct us_data *us, u16 addr, u8 *data, u16 len)
 	cmnd[5] = (u8) len;
 
 	retval = rts51x_bulk_transport(us, 0, cmnd, 12,
-				       data, len, DMA_FROM_DEVICE, NULL);
-	if (retval != USB_STOR_TRANSPORT_GOOD)
+				       buf, len, DMA_FROM_DEVICE, NULL);
+	if (retval != USB_STOR_TRANSPORT_GOOD) {
+		kfree(buf);
 		return -EIO;
+	}
 
+	memcpy(data, buf, len);
+	kfree(buf);
 	return 0;
 }
 
@@ -341,6 +396,12 @@ static int rts51x_write_mem(struct us_data *us, u16 addr, u8 *data, u16 len)
 {
 	int retval;
 	u8 cmnd[12] = { 0 };
+	u8 *buf;
+
+	buf = kmalloc(len, GFP_NOIO);
+	if (buf == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
+	memcpy(buf, data, len);
 
 	US_DEBUGP("%s, addr = 0x%x, len = %d\n", __func__, addr, len);
 
@@ -352,7 +413,8 @@ static int rts51x_write_mem(struct us_data *us, u16 addr, u8 *data, u16 len)
 	cmnd[5] = (u8) len;
 
 	retval = rts51x_bulk_transport(us, 0, cmnd, 12,
-				       data, len, DMA_TO_DEVICE, NULL);
+				       buf, len, DMA_TO_DEVICE, NULL);
+	kfree(buf);
 	if (retval != USB_STOR_TRANSPORT_GOOD)
 		return -EIO;
 
@@ -364,6 +426,11 @@ static int rts51x_read_status(struct us_data *us,
 {
 	int retval;
 	u8 cmnd[12] = { 0 };
+	u8 *buf;
+
+	buf = kmalloc(len, GFP_NOIO);
+	if (buf == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
 
 	US_DEBUGP("%s, lun = %d\n", __func__, lun);
 
@@ -371,10 +438,14 @@ static int rts51x_read_status(struct us_data *us,
 	cmnd[1] = 0x09;
 
 	retval = rts51x_bulk_transport(us, lun, cmnd, 12,
-				       status, len, DMA_FROM_DEVICE, actlen);
-	if (retval != USB_STOR_TRANSPORT_GOOD)
+				       buf, len, DMA_FROM_DEVICE, actlen);
+	if (retval != USB_STOR_TRANSPORT_GOOD) {
+		kfree(buf);
 		return -EIO;
+	}
 
+	memcpy(status, buf, len);
+	kfree(buf);
 	return 0;
 }
 
@@ -433,6 +504,29 @@ static int enable_oscillator(struct us_data *us)
 	return 0;
 }
 
+static int __do_config_autodelink(struct us_data *us, u8 *data, u16 len)
+{
+	int retval;
+	u16 addr = 0xFE47;
+	u8 cmnd[12] = {0};
+
+	US_DEBUGP("%s, addr = 0x%x, len = %d\n", __FUNCTION__, addr, len);
+
+	cmnd[0] = 0xF0;
+	cmnd[1] = 0x0E;
+	cmnd[2] = (u8)(addr >> 8);
+	cmnd[3] = (u8)addr;
+	cmnd[4] = (u8)(len >> 8);
+	cmnd[5] = (u8)len;
+
+	retval = rts51x_bulk_transport_special(us, 0, cmnd, 12, data, len, DMA_TO_DEVICE, NULL);
+	if (retval != USB_STOR_TRANSPORT_GOOD) {
+		return -EIO;
+	}
+
+	return 0;
+}
+
 static int do_config_autodelink(struct us_data *us, int enable, int force)
 {
 	int retval;
@@ -453,7 +547,8 @@ static int do_config_autodelink(struct us_data *us, int enable, int force)
 
 	US_DEBUGP("In %s,set 0xfe47 to 0x%x\n", __func__, value);
 
-	retval = rts51x_write_mem(us, 0xFE47, &value, 1);
+	/* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */
+	retval = __do_config_autodelink(us, &value, 1);
 	if (retval < 0)
 		return -EIO;
 
@@ -485,7 +580,8 @@ static int config_autodelink_after_power_on(struct us_data *us)
 
 		SET_BIT(value, 7);
 
-		retval = rts51x_write_mem(us, 0xFE47, &value, 1);
+		/* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */
+		retval = __do_config_autodelink(us, &value, 1);
 		if (retval < 0)
 			return -EIO;
 
@@ -506,7 +602,8 @@ static int config_autodelink_after_power_on(struct us_data *us)
 			CLR_BIT(value, 7);
 		}
 
-		retval = rts51x_write_mem(us, 0xFE47, &value, 1);
+		/* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */
+		retval = __do_config_autodelink(us, &value, 1);
 		if (retval < 0)
 			return -EIO;
 
@@ -583,7 +680,8 @@ static int config_autodelink_before_power_down(struct us_data *us)
 			if (CHECK_ID(chip, 0x0138, 0x3882))
 				SET_BIT(value, 2);
 
-			retval = rts51x_write_mem(us, 0xFE47, &value, 1);
+			/* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */
+			retval = __do_config_autodelink(us, &value, 1);
 			if (retval < 0)
 				return -EIO;
 		}
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index e8ae21b..ff32390 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -691,6 +691,9 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
 		int temp_result;
 		struct scsi_eh_save ses;
 		int sense_size = US_SENSE_SIZE;
+		struct scsi_sense_hdr sshdr;
+		const u8 *scdd;
+		u8 fm_ili;
 
 		/* device supports and needs bigger sense buffer */
 		if (us->fflags & US_FL_SANE_SENSE)
@@ -774,32 +777,30 @@ Retry_Sense:
 			srb->sense_buffer[7] = (US_SENSE_SIZE - 8);
 		}
 
+		scsi_normalize_sense(srb->sense_buffer, SCSI_SENSE_BUFFERSIZE,
+				     &sshdr);
+
 		US_DEBUGP("-- Result from auto-sense is %d\n", temp_result);
 		US_DEBUGP("-- code: 0x%x, key: 0x%x, ASC: 0x%x, ASCQ: 0x%x\n",
-			  srb->sense_buffer[0],
-			  srb->sense_buffer[2] & 0xf,
-			  srb->sense_buffer[12], 
-			  srb->sense_buffer[13]);
+			  sshdr.response_code, sshdr.sense_key,
+			  sshdr.asc, sshdr.ascq);
 #ifdef CONFIG_USB_STORAGE_DEBUG
-		usb_stor_show_sense(
-			  srb->sense_buffer[2] & 0xf,
-			  srb->sense_buffer[12], 
-			  srb->sense_buffer[13]);
+		usb_stor_show_sense(sshdr.sense_key, sshdr.asc, sshdr.ascq);
 #endif
 
 		/* set the result so the higher layers expect this data */
 		srb->result = SAM_STAT_CHECK_CONDITION;
 
+		scdd = scsi_sense_desc_find(srb->sense_buffer,
+					    SCSI_SENSE_BUFFERSIZE, 4);
+		fm_ili = (scdd ? scdd[3] : srb->sense_buffer[2]) & 0xA0;
+
 		/* We often get empty sense data.  This could indicate that
 		 * everything worked or that there was an unspecified
 		 * problem.  We have to decide which.
 		 */
-		if (	/* Filemark 0, ignore EOM, ILI 0, no sense */
-				(srb->sense_buffer[2] & 0xaf) == 0 &&
-			/* No ASC or ASCQ */
-				srb->sense_buffer[12] == 0 &&
-				srb->sense_buffer[13] == 0) {
-
+		if (sshdr.sense_key == 0 && sshdr.asc == 0 && sshdr.ascq == 0 &&
+		    fm_ili == 0) {
 			/* If things are really okay, then let's show that.
 			 * Zero out the sense buffer so the higher layers
 			 * won't realize we did an unsolicited auto-sense.
@@ -814,7 +815,10 @@ Retry_Sense:
 			 */
 			} else {
 				srb->result = DID_ERROR << 16;
-				srb->sense_buffer[2] = HARDWARE_ERROR;
+				if ((sshdr.response_code & 0x72) == 0x72)
+					srb->sense_buffer[1] = HARDWARE_ERROR;
+				else
+					srb->sense_buffer[2] = HARDWARE_ERROR;
 			}
 		}
 	}
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 0ca0958..c325e69 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -831,12 +831,22 @@ static int usb_stor_scan_thread(void * __us)
 
 	dev_dbg(dev, "device found\n");
 
-	set_freezable();
-	/* Wait for the timeout to expire or for a disconnect */
+	set_freezable_with_signal();
+	/*
+	 * Wait for the timeout to expire or for a disconnect
+	 *
+	 * We can't freeze in this thread or we risk causing khubd to
+	 * fail to freeze, but we can't be non-freezable either. Nor can
+	 * khubd freeze while waiting for scanning to complete as it may
+	 * hold the device lock, causing a hang when suspending devices.
+	 * So we request a fake signal when freezing and use
+	 * interruptible sleep to kick us out of our wait early when
+	 * freezing happens.
+	 */
 	if (delay_use > 0) {
 		dev_dbg(dev, "waiting for device to settle "
 				"before scanning\n");
-		wait_event_freezable_timeout(us->delay_wait,
+		wait_event_interruptible_timeout(us->delay_wait,
 				test_bit(US_FLIDX_DONT_SCAN, &us->dflags),
 				delay_use * HZ);
 	}
diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c
new file mode 100644
index 0000000..d29503e
--- /dev/null
+++ b/drivers/usb/usb-common.c
@@ -0,0 +1,35 @@
+/*
+ * Provides code common for host and device side USB.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ *
+ * If either host side (ie. CONFIG_USB=y) or device side USB stack
+ * (ie. CONFIG_USB_GADGET=y) is compiled in the kernel, this module is
+ * compiled-in as well.  Otherwise, if either of the two stacks is
+ * compiled as module, this file is compiled as module as well.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb/ch9.h>
+
+const char *usb_speed_string(enum usb_device_speed speed)
+{
+	static const char *const names[] = {
+		[USB_SPEED_UNKNOWN] = "UNKNOWN",
+		[USB_SPEED_LOW] = "low-speed",
+		[USB_SPEED_FULL] = "full-speed",
+		[USB_SPEED_HIGH] = "high-speed",
+		[USB_SPEED_WIRELESS] = "wireless",
+		[USB_SPEED_SUPER] = "super-speed",
+	};
+
+	if (speed < 0 || speed >= ARRAY_SIZE(names))
+		speed = USB_SPEED_UNKNOWN;
+	return names[speed];
+}
+EXPORT_SYMBOL_GPL(usb_speed_string);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index e24ce31..32d6fc9 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -555,7 +555,7 @@ static int skel_probe(struct usb_interface *interface,
 		if (!dev->bulk_in_endpointAddr &&
 		    usb_endpoint_is_bulk_in(endpoint)) {
 			/* we found a bulk in endpoint */
-			buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+			buffer_size = usb_endpoint_maxp(endpoint);
 			dev->bulk_in_size = buffer_size;
 			dev->bulk_in_endpointAddr = endpoint->bEndpointAddress;
 			dev->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
diff --git a/drivers/usb/wusbcore/wa-hc.c b/drivers/usb/wusbcore/wa-hc.c
index 59a748a..0d1863c 100644
--- a/drivers/usb/wusbcore/wa-hc.c
+++ b/drivers/usb/wusbcore/wa-hc.c
@@ -43,7 +43,7 @@ int wa_create(struct wahc *wa, struct usb_interface *iface)
 	/* Fill up Data Transfer EP pointers */
 	wa->dti_epd = &iface->cur_altsetting->endpoint[1].desc;
 	wa->dto_epd = &iface->cur_altsetting->endpoint[2].desc;
-	wa->xfer_result_size = le16_to_cpu(wa->dti_epd->wMaxPacketSize);
+	wa->xfer_result_size = usb_endpoint_maxp(wa->dti_epd);
 	wa->xfer_result = kmalloc(wa->xfer_result_size, GFP_KERNEL);
 	if (wa->xfer_result == NULL)
 		goto error_xfer_result_alloc;