Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 626 insertions, 0 deletions

diff --git a/include/asm-alpha/system.h b/include/asm-alpha/system.h
new file mode 100644
index 0000000..c08ce97
--- /dev/null
+++ b/include/asm-alpha/system.h
@@ -0,0 +1,626 @@
+#ifndef __ALPHA_SYSTEM_H
+#define __ALPHA_SYSTEM_H
+
+#include <linux/config.h>
+#include <asm/pal.h>
+#include <asm/page.h>
+
+/*
+ * System defines.. Note that this is included both from .c and .S
+ * files, so it does only defines, not any C code.
+ */
+
+/*
+ * We leave one page for the initial stack page, and one page for
+ * the initial process structure. Also, the console eats 3 MB for
+ * the initial bootloader (one of which we can reclaim later).
+ */
+#define BOOT_PCB	0x20000000
+#define BOOT_ADDR	0x20000000
+/* Remove when official MILO sources have ELF support: */
+#define BOOT_SIZE	(16*1024)
+
+#ifdef CONFIG_ALPHA_LEGACY_START_ADDRESS
+#define KERNEL_START_PHYS	0x300000 /* Old bootloaders hardcoded this.  */
+#else
+#define KERNEL_START_PHYS	0x1000000 /* required: Wildfire/Titan/Marvel */
+#endif
+
+#define KERNEL_START	(PAGE_OFFSET+KERNEL_START_PHYS)
+#define SWAPPER_PGD	KERNEL_START
+#define INIT_STACK	(PAGE_OFFSET+KERNEL_START_PHYS+0x02000)
+#define EMPTY_PGT	(PAGE_OFFSET+KERNEL_START_PHYS+0x04000)
+#define EMPTY_PGE	(PAGE_OFFSET+KERNEL_START_PHYS+0x08000)
+#define ZERO_PGE	(PAGE_OFFSET+KERNEL_START_PHYS+0x0A000)
+
+#define START_ADDR	(PAGE_OFFSET+KERNEL_START_PHYS+0x10000)
+
+/*
+ * This is setup by the secondary bootstrap loader.  Because
+ * the zero page is zeroed out as soon as the vm system is
+ * initialized, we need to copy things out into a more permanent
+ * place.
+ */
+#define PARAM			ZERO_PGE
+#define COMMAND_LINE		((char*)(PARAM + 0x0000))
+#define INITRD_START		(*(unsigned long *) (PARAM+0x100))
+#define INITRD_SIZE		(*(unsigned long *) (PARAM+0x108))
+
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+
+/*
+ * This is the logout header that should be common to all platforms
+ * (assuming they are running OSF/1 PALcode, I guess).
+ */
+struct el_common {
+	unsigned int	size;		/* size in bytes of logout area */
+	unsigned int	sbz1	: 30;	/* should be zero */
+	unsigned int	err2	:  1;	/* second error */
+	unsigned int	retry	:  1;	/* retry flag */
+	unsigned int	proc_offset;	/* processor-specific offset */
+	unsigned int	sys_offset;	/* system-specific offset */
+	unsigned int	code;		/* machine check code */
+	unsigned int	frame_rev;	/* frame revision */
+};
+
+/* Machine Check Frame for uncorrectable errors (Large format)
+ *      --- This is used to log uncorrectable errors such as
+ *          double bit ECC errors.
+ *      --- These errors are detected by both processor and systems.
+ */
+struct el_common_EV5_uncorrectable_mcheck {
+        unsigned long   shadow[8];        /* Shadow reg. 8-14, 25           */
+        unsigned long   paltemp[24];      /* PAL TEMP REGS.                 */
+        unsigned long   exc_addr;         /* Address of excepting instruction*/
+        unsigned long   exc_sum;          /* Summary of arithmetic traps.   */
+        unsigned long   exc_mask;         /* Exception mask (from exc_sum). */
+        unsigned long   pal_base;         /* Base address for PALcode.      */
+        unsigned long   isr;              /* Interrupt Status Reg.          */
+        unsigned long   icsr;             /* CURRENT SETUP OF EV5 IBOX      */
+        unsigned long   ic_perr_stat;     /* I-CACHE Reg. <11> set Data parity
+                                                         <12> set TAG parity*/
+        unsigned long   dc_perr_stat;     /* D-CACHE error Reg. Bits set to 1:
+                                                     <2> Data error in bank 0
+                                                     <3> Data error in bank 1
+                                                     <4> Tag error in bank 0
+                                                     <5> Tag error in bank 1 */
+        unsigned long   va;               /* Effective VA of fault or miss. */
+        unsigned long   mm_stat;          /* Holds the reason for D-stream 
+                                             fault or D-cache parity errors */
+        unsigned long   sc_addr;          /* Address that was being accessed
+                                             when EV5 detected Secondary cache
+                                             failure.                 */
+        unsigned long   sc_stat;          /* Helps determine if the error was
+                                             TAG/Data parity(Secondary Cache)*/
+        unsigned long   bc_tag_addr;      /* Contents of EV5 BC_TAG_ADDR    */
+        unsigned long   ei_addr;          /* Physical address of any transfer
+                                             that is logged in EV5 EI_STAT */
+        unsigned long   fill_syndrome;    /* For correcting ECC errors.     */
+        unsigned long   ei_stat;          /* Helps identify reason of any 
+                                             processor uncorrectable error
+                                             at its external interface.     */
+        unsigned long   ld_lock;          /* Contents of EV5 LD_LOCK register*/
+};
+
+struct el_common_EV6_mcheck {
+	unsigned int FrameSize;		/* Bytes, including this field */
+	unsigned int FrameFlags;	/* <31> = Retry, <30> = Second Error */
+	unsigned int CpuOffset;		/* Offset to CPU-specific info */
+	unsigned int SystemOffset;	/* Offset to system-specific info */
+	unsigned int MCHK_Code;
+	unsigned int MCHK_Frame_Rev;
+	unsigned long I_STAT;		/* EV6 Internal Processor Registers */
+	unsigned long DC_STAT;		/* (See the 21264 Spec) */
+	unsigned long C_ADDR;
+	unsigned long DC1_SYNDROME;
+	unsigned long DC0_SYNDROME;
+	unsigned long C_STAT;
+	unsigned long C_STS;
+	unsigned long MM_STAT;
+	unsigned long EXC_ADDR;
+	unsigned long IER_CM;
+	unsigned long ISUM;
+	unsigned long RESERVED0;
+	unsigned long PAL_BASE;
+	unsigned long I_CTL;
+	unsigned long PCTX;
+};
+
+extern void halt(void) __attribute__((noreturn));
+#define __halt() __asm__ __volatile__ ("call_pal %0 #halt" : : "i" (PAL_halt))
+
+#define switch_to(P,N,L)						\
+  do {									\
+    (L) = alpha_switch_to(virt_to_phys(&(N)->thread_info->pcb), (P));	\
+    check_mmu_context();						\
+  } while (0)
+
+struct task_struct;
+extern struct task_struct *alpha_switch_to(unsigned long, struct task_struct*);
+
+#define mb() \
+__asm__ __volatile__("mb": : :"memory")
+
+#define rmb() \
+__asm__ __volatile__("mb": : :"memory")
+
+#define wmb() \
+__asm__ __volatile__("wmb": : :"memory")
+
+#define read_barrier_depends() \
+__asm__ __volatile__("mb": : :"memory")
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	barrier()
+#endif
+
+#define set_mb(var, value) \
+do { var = value; mb(); } while (0)
+
+#define set_wmb(var, value) \
+do { var = value; wmb(); } while (0)
+
+#define imb() \
+__asm__ __volatile__ ("call_pal %0 #imb" : : "i" (PAL_imb) : "memory")
+
+#define draina() \
+__asm__ __volatile__ ("call_pal %0 #draina" : : "i" (PAL_draina) : "memory")
+
+enum implver_enum {
+	IMPLVER_EV4,
+	IMPLVER_EV5,
+	IMPLVER_EV6
+};
+
+#ifdef CONFIG_ALPHA_GENERIC
+#define implver()				\
+({ unsigned long __implver;			\
+   __asm__ ("implver %0" : "=r"(__implver));	\
+   (enum implver_enum) __implver; })
+#else
+/* Try to eliminate some dead code.  */
+#ifdef CONFIG_ALPHA_EV4
+#define implver() IMPLVER_EV4
+#endif
+#ifdef CONFIG_ALPHA_EV5
+#define implver() IMPLVER_EV5
+#endif
+#if defined(CONFIG_ALPHA_EV6)
+#define implver() IMPLVER_EV6
+#endif
+#endif
+
+enum amask_enum {
+	AMASK_BWX = (1UL << 0),
+	AMASK_FIX = (1UL << 1),
+	AMASK_CIX = (1UL << 2),
+	AMASK_MAX = (1UL << 8),
+	AMASK_PRECISE_TRAP = (1UL << 9),
+};
+
+#define amask(mask)						\
+({ unsigned long __amask, __input = (mask);			\
+   __asm__ ("amask %1,%0" : "=r"(__amask) : "rI"(__input));	\
+   __amask; })
+
+#define __CALL_PAL_R0(NAME, TYPE)				\
+static inline TYPE NAME(void)					\
+{								\
+	register TYPE __r0 __asm__("$0");			\
+	__asm__ __volatile__(					\
+		"call_pal %1 # " #NAME				\
+		:"=r" (__r0)					\
+		:"i" (PAL_ ## NAME)				\
+		:"$1", "$16", "$22", "$23", "$24", "$25");	\
+	return __r0;						\
+}
+
+#define __CALL_PAL_W1(NAME, TYPE0)				\
+static inline void NAME(TYPE0 arg0)				\
+{								\
+	register TYPE0 __r16 __asm__("$16") = arg0;		\
+	__asm__ __volatile__(					\
+		"call_pal %1 # "#NAME				\
+		: "=r"(__r16)					\
+		: "i"(PAL_ ## NAME), "0"(__r16)			\
+		: "$1", "$22", "$23", "$24", "$25");		\
+}
+
+#define __CALL_PAL_W2(NAME, TYPE0, TYPE1)			\
+static inline void NAME(TYPE0 arg0, TYPE1 arg1)			\
+{								\
+	register TYPE0 __r16 __asm__("$16") = arg0;		\
+	register TYPE1 __r17 __asm__("$17") = arg1;		\
+	__asm__ __volatile__(					\
+		"call_pal %2 # "#NAME				\
+		: "=r"(__r16), "=r"(__r17)			\
+		: "i"(PAL_ ## NAME), "0"(__r16), "1"(__r17)	\
+		: "$1", "$22", "$23", "$24", "$25");		\
+}
+
+#define __CALL_PAL_RW1(NAME, RTYPE, TYPE0)			\
+static inline RTYPE NAME(TYPE0 arg0)				\
+{								\
+	register RTYPE __r0 __asm__("$0");			\
+	register TYPE0 __r16 __asm__("$16") = arg0;		\
+	__asm__ __volatile__(					\
+		"call_pal %2 # "#NAME				\
+		: "=r"(__r16), "=r"(__r0)			\
+		: "i"(PAL_ ## NAME), "0"(__r16)			\
+		: "$1", "$22", "$23", "$24", "$25");		\
+	return __r0;						\
+}
+
+#define __CALL_PAL_RW2(NAME, RTYPE, TYPE0, TYPE1)		\
+static inline RTYPE NAME(TYPE0 arg0, TYPE1 arg1)		\
+{								\
+	register RTYPE __r0 __asm__("$0");			\
+	register TYPE0 __r16 __asm__("$16") = arg0;		\
+	register TYPE1 __r17 __asm__("$17") = arg1;		\
+	__asm__ __volatile__(					\
+		"call_pal %3 # "#NAME				\
+		: "=r"(__r16), "=r"(__r17), "=r"(__r0)		\
+		: "i"(PAL_ ## NAME), "0"(__r16), "1"(__r17)	\
+		: "$1", "$22", "$23", "$24", "$25");		\
+	return __r0;						\
+}
+
+__CALL_PAL_W1(cflush, unsigned long);
+__CALL_PAL_R0(rdmces, unsigned long);
+__CALL_PAL_R0(rdps, unsigned long);
+__CALL_PAL_R0(rdusp, unsigned long);
+__CALL_PAL_RW1(swpipl, unsigned long, unsigned long);
+__CALL_PAL_R0(whami, unsigned long);
+__CALL_PAL_W2(wrent, void*, unsigned long);
+__CALL_PAL_W1(wripir, unsigned long);
+__CALL_PAL_W1(wrkgp, unsigned long);
+__CALL_PAL_W1(wrmces, unsigned long);
+__CALL_PAL_RW2(wrperfmon, unsigned long, unsigned long, unsigned long);
+__CALL_PAL_W1(wrusp, unsigned long);
+__CALL_PAL_W1(wrvptptr, unsigned long);
+
+#define IPL_MIN		0
+#define IPL_SW0		1
+#define IPL_SW1		2
+#define IPL_DEV0	3
+#define IPL_DEV1	4
+#define IPL_TIMER	5
+#define IPL_PERF	6
+#define IPL_POWERFAIL	6
+#define IPL_MCHECK	7
+#define IPL_MAX		7
+
+#ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK
+#undef IPL_MIN
+#define IPL_MIN		__min_ipl
+extern int __min_ipl;
+#endif
+
+#define getipl()		(rdps() & 7)
+#define setipl(ipl)		((void) swpipl(ipl))
+
+#define local_irq_disable()			do { setipl(IPL_MAX); barrier(); } while(0)
+#define local_irq_enable()			do { barrier(); setipl(IPL_MIN); } while(0)
+#define local_save_flags(flags)	((flags) = rdps())
+#define local_irq_save(flags)	do { (flags) = swpipl(IPL_MAX); barrier(); } while(0)
+#define local_irq_restore(flags)	do { barrier(); setipl(flags); barrier(); } while(0)
+
+#define irqs_disabled()	(getipl() == IPL_MAX)
+
+/*
+ * TB routines..
+ */
+#define __tbi(nr,arg,arg1...)					\
+({								\
+	register unsigned long __r16 __asm__("$16") = (nr);	\
+	register unsigned long __r17 __asm__("$17"); arg;	\
+	__asm__ __volatile__(					\
+		"call_pal %3 #__tbi"				\
+		:"=r" (__r16),"=r" (__r17)			\
+		:"0" (__r16),"i" (PAL_tbi) ,##arg1		\
+		:"$0", "$1", "$22", "$23", "$24", "$25");	\
+})
+
+#define tbi(x,y)	__tbi(x,__r17=(y),"1" (__r17))
+#define tbisi(x)	__tbi(1,__r17=(x),"1" (__r17))
+#define tbisd(x)	__tbi(2,__r17=(x),"1" (__r17))
+#define tbis(x)		__tbi(3,__r17=(x),"1" (__r17))
+#define tbiap()		__tbi(-1, /* no second argument */)
+#define tbia()		__tbi(-2, /* no second argument */)
+
+/*
+ * Atomic exchange.
+ * Since it can be used to implement critical sections
+ * it must clobber "memory" (also for interrupts in UP).
+ */
+
+static inline unsigned long
+__xchg_u8(volatile char *m, unsigned long val)
+{
+	unsigned long ret, tmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%4,7,%3\n"
+	"	insbl	%1,%4,%1\n"
+	"1:	ldq_l	%2,0(%3)\n"
+	"	extbl	%2,%4,%0\n"
+	"	mskbl	%2,%4,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%3)\n"
+	"	beq	%2,2f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
+	: "r" ((long)m), "1" (val) : "memory");
+
+	return ret;
+}
+
+static inline unsigned long
+__xchg_u16(volatile short *m, unsigned long val)
+{
+	unsigned long ret, tmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%4,7,%3\n"
+	"	inswl	%1,%4,%1\n"
+	"1:	ldq_l	%2,0(%3)\n"
+	"	extwl	%2,%4,%0\n"
+	"	mskwl	%2,%4,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%3)\n"
+	"	beq	%2,2f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
+	: "r" ((long)m), "1" (val) : "memory");
+
+	return ret;
+}
+
+static inline unsigned long
+__xchg_u32(volatile int *m, unsigned long val)
+{
+	unsigned long dummy;
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%4\n"
+	"	bis $31,%3,%1\n"
+	"	stl_c %1,%2\n"
+	"	beq %1,2f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	: "=&r" (val), "=&r" (dummy), "=m" (*m)
+	: "rI" (val), "m" (*m) : "memory");
+
+	return val;
+}
+
+static inline unsigned long
+__xchg_u64(volatile long *m, unsigned long val)
+{
+	unsigned long dummy;
+
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%4\n"
+	"	bis $31,%3,%1\n"
+	"	stq_c %1,%2\n"
+	"	beq %1,2f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	: "=&r" (val), "=&r" (dummy), "=m" (*m)
+	: "rI" (val), "m" (*m) : "memory");
+
+	return val;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid xchg().  */
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline unsigned long
+__xchg(volatile void *ptr, unsigned long x, int size)
+{
+	switch (size) {
+		case 1:
+			return __xchg_u8(ptr, x);
+		case 2:
+			return __xchg_u16(ptr, x);
+		case 4:
+			return __xchg_u32(ptr, x);
+		case 8:
+			return __xchg_u64(ptr, x);
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+#define xchg(ptr,x)							     \
+  ({									     \
+     __typeof__(*(ptr)) _x_ = (x);					     \
+     (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \
+  })
+
+#define tas(ptr) (xchg((ptr),1))
+
+
+/* 
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ *
+ * The memory barrier should be placed in SMP only when we actually
+ * make the change. If we don't change anything (so if the returned
+ * prev is equal to old) then we aren't acquiring anything new and
+ * we don't need any memory barrier as far I can tell.
+ */
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long
+__cmpxchg_u8(volatile char *m, long old, long new)
+{
+	unsigned long prev, tmp, cmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%5,7,%4\n"
+	"	insbl	%1,%5,%1\n"
+	"1:	ldq_l	%2,0(%4)\n"
+	"	extbl	%2,%5,%0\n"
+	"	cmpeq	%0,%6,%3\n"
+	"	beq	%3,2f\n"
+	"	mskbl	%2,%5,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%4)\n"
+	"	beq	%2,3f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	"2:\n"
+	".subsection 2\n"
+	"3:	br	1b\n"
+	".previous"
+	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
+	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+__cmpxchg_u16(volatile short *m, long old, long new)
+{
+	unsigned long prev, tmp, cmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%5,7,%4\n"
+	"	inswl	%1,%5,%1\n"
+	"1:	ldq_l	%2,0(%4)\n"
+	"	extwl	%2,%5,%0\n"
+	"	cmpeq	%0,%6,%3\n"
+	"	beq	%3,2f\n"
+	"	mskwl	%2,%5,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%4)\n"
+	"	beq	%2,3f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	"2:\n"
+	".subsection 2\n"
+	"3:	br	1b\n"
+	".previous"
+	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
+	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+__cmpxchg_u32(volatile int *m, int old, int new)
+{
+	unsigned long prev, cmp;
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%5\n"
+	"	cmpeq %0,%3,%1\n"
+	"	beq %1,2f\n"
+	"	mov %4,%1\n"
+	"	stl_c %1,%2\n"
+	"	beq %1,3f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	"2:\n"
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
+	: "r"((long) old), "r"(new), "m"(*m) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+__cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new)
+{
+	unsigned long prev, cmp;
+
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%5\n"
+	"	cmpeq %0,%3,%1\n"
+	"	beq %1,2f\n"
+	"	mov %4,%1\n"
+	"	stq_c %1,%2\n"
+	"	beq %1,3f\n"
+#ifdef CONFIG_SMP
+	"	mb\n"
+#endif
+	"2:\n"
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
+	: "r"((long) old), "r"(new), "m"(*m) : "memory");
+
+	return prev;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid cmpxchg().  */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
+{
+	switch (size) {
+		case 1:
+			return __cmpxchg_u8(ptr, old, new);
+		case 2:
+			return __cmpxchg_u16(ptr, old, new);
+		case 4:
+			return __cmpxchg_u32(ptr, old, new);
+		case 8:
+			return __cmpxchg_u64(ptr, old, new);
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr,o,n)						 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+#endif /* __ASSEMBLY__ */
+
+#define arch_align_stack(x) (x)
+
+#endif