[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 0 insertions, 75 deletions

diff --git a/include/asm-arm/arch-omap/sdrc.h b/include/asm-arm/arch-omap/sdrc.h
deleted file mode 100644
index 673b396..0000000
--- a/include/asm-arm/arch-omap/sdrc.h
+++ /dev/null
@@ -1,75 +0,0 @@
-#ifndef ____ASM_ARCH_SDRC_H
-#define ____ASM_ARCH_SDRC_H
-
-/*
- * OMAP2/3 SDRC/SMS register definitions
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/arch/io.h>
-
-/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
-
-#define SDRC_SYSCONFIG		0x010
-#define SDRC_DLLA_CTRL		0x060
-#define SDRC_DLLA_STATUS	0x064
-#define SDRC_DLLB_CTRL		0x068
-#define SDRC_DLLB_STATUS	0x06C
-#define SDRC_POWER		0x070
-#define SDRC_MR_0		0x084
-#define SDRC_RFR_CTRL_0		0x0a4
-
-/*
- * These values represent the number of memory clock cycles between
- * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
- * rows per device, and include a subtraction of a 50 cycle window in the
- * event that the autorefresh command is delayed due to other SDRC activity.
- * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
- * counter reaches 0.
- *
- * These represent optimal values for common parts, it won't work for all.
- * As long as you scale down, most parameters are still work, they just
- * become sub-optimal. The RFR value goes in the opposite direction. If you
- * don't adjust it down as your clock period increases the refresh interval
- * will not be met. Setting all parameters for complete worst case may work,
- * but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration.	A dynamic call is
- * need for that as no single right value exists acorss production samples.
- *
- * Only the FULL speed values are given. Current code is such that rate
- * changes must be made at DPLLoutx2. The actual value adjustment for low
- * frequency operation will be handled by omap_set_performance()
- *
- * By having the boot loader boot up in the fastest L4 speed available likely
- * will result in something which you can switch between.
- */
-#define SDRC_RFR_CTRL_165MHz	(0x00044c00 | 1)
-#define SDRC_RFR_CTRL_133MHz	(0x0003de00 | 1)
-#define SDRC_RFR_CTRL_100MHz	(0x0002da01 | 1)
-#define SDRC_RFR_CTRL_110MHz	(0x0002da01 | 1) /* Need to calc */
-#define SDRC_RFR_CTRL_BYPASS	(0x00005000 | 1) /* Need to calc */
-
-
-/*
- * SMS register access
- */
-
-
-#define OMAP242X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
-#define OMAP243X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
-#define OMAP343X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
-
-/* SMS register offsets - read/write with sms_{read,write}_reg() */
-
-#define SMS_SYSCONFIG		0x010
-/* REVISIT: fill in other SMS registers here */
-
-#endif