sh: sh775x/titan fixes for irq header changes.

The following moves the creation of IPR interupts into setup-7750.c
and updates a few other things to make it all work after the "Drop
CPU subtype IRQ headers" commit. It boots and runs fine on my titan
board.

 - adds an ipr_idx to the ipr_data and uses a function in the subtype
   code to calculate the address of the IPR registers

 - adds a function to enable individual interrupt mode for externals
   in the subtype code and calls that from the titan board code
   instead of doing it directly.

 - I changed the shift in the ipr_data to be the actual # of bits to
   shift, instead of the numnber / 4 - made it easier to match with
   the manual.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

2 files changed, 31 insertions, 33 deletions

diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h
index f10cfc1..fd57608 100644
--- a/include/asm-sh/irq.h
+++ b/include/asm-sh/irq.h
@@ -93,6 +93,12 @@
 #define NR_IRQS (ONCHIP_NR_IRQS + PINT_NR_IRQS + OFFCHIP_NR_IRQS)
 
 /*
+ * Convert back and forth between INTEVT and IRQ values.
+ */
+#define evt2irq(evt)		(((evt) >> 5) - 16)
+#define irq2evt(irq)		(((irq) + 16) << 5)
+
+/*
  * Simple Mask Register Support
  */
 extern void make_maskreg_irq(unsigned int irq);
@@ -103,18 +109,36 @@ extern unsigned short *irq_mask_register;
  */
 void init_IRQ_pint(void);
 
+/*
+ * The shift value is now the number of bits to shift, not the number of
+ * bits/4. This is to make it easier to read the value directly from the
+ * datasheets. The IPR address, addr, will be set from ipr_idx via the
+ * map_ipridx_to_addr function.
+ */
 struct ipr_data {
 	unsigned int irq;
-	unsigned int addr;	/* Address of Interrupt Priority Register */
-	int shift;		/* Shifts of the 16-bit data */
+	int ipr_idx;		/* Index for the IPR registered */
+	int shift;		/* Number of bits to shift the data */
 	int priority;		/* The priority */
+	unsigned int addr;	/* Address of Interrupt Priority Register */
 };
 
 /*
+ * Given an IPR IDX, map the value to an IPR register address.
+ */
+unsigned int map_ipridx_to_addr(int idx);
+
+/*
+ * Enable individual interrupt mode for external IPR IRQs.
+ */
+void ipr_irq_enable_irlm(void);
+
+/*
  * Function for "on chip support modules".
  */
-extern void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs);
-extern void make_imask_irq(unsigned int irq);
+void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs);
+void make_imask_irq(unsigned int irq);
+void init_IRQ_ipr(void);
 
 struct intc2_data {
 	unsigned short irq;
diff --git a/include/asm-sh/titan.h b/include/asm-sh/titan.h
index 270a4f4..03f3583 100644
--- a/include/asm-sh/titan.h
+++ b/include/asm-sh/titan.h
@@ -1,9 +1,8 @@
 /*
  * Platform defintions for Titan
  */
-
-#ifndef _ASM_SH_TITAN_TITAN_H
-#define _ASM_SH_TITAN_TITAN_H
+#ifndef _ASM_SH_TITAN_H
+#define _ASM_SH_TITAN_H
 
 #define __IO_PREFIX titan
 #include <asm/io_generic.h>
@@ -15,29 +14,4 @@
 #define TITAN_IRQ_MPCIB		11	/* mPCI B */
 #define TITAN_IRQ_USB		11	/* USB */
 
-/*
- * The external interrupt lines, these take up ints 0 - 15 inclusive
- * depending on the priority for the interrupt.  In fact the priority
- * is the interrupt :-)
- */
-#define IRL0_IRQ	0
-#define IRL0_IPR_ADDR	INTC_IPRD
-#define IRL0_IPR_POS	3
-#define IRL0_PRIORITY	8
-
-#define IRL1_IRQ	1
-#define IRL1_IPR_ADDR	INTC_IPRD
-#define IRL1_IPR_POS	2
-#define IRL1_PRIORITY	8
-
-#define IRL2_IRQ	2
-#define IRL2_IPR_ADDR	INTC_IPRD
-#define IRL2_IPR_POS	1
-#define IRL2_PRIORITY	8
-
-#define IRL3_IRQ	3
-#define IRL3_IPR_ADDR	INTC_IPRD
-#define IRL3_IPR_POS	0
-#define IRL3_PRIORITY	8
-
-#endif
+#endif /* __ASM_SH_TITAN_H */