[POWERPC] 85xx: Add support for relocatable kernel (and booting at non-zero)

Added support to allow an 85xx kernel to be run from a non-zero physical
address (useful for cooperative asymmetric multiprocessing situations and
kdump).  The support can be configured at compile time by setting
CONFIG_PAGE_OFFSET, CONFIG_KERNEL_START, and CONFIG_PHYSICAL_START as
desired.

Alternatively, the kernel build can set CONFIG_RELOCATABLE.  Setting this
config option causes the kernel to determine at runtime the physical
addresses of CONFIG_PAGE_OFFSET and CONFIG_KERNEL_START.  If
CONFIG_RELOCATABLE is set, then CONFIG_PHYSICAL_START has no meaning.
However, CONFIG_PHYSICAL_START will always be used to set the LOAD program
header physical address field in the resulting ELF image.

Currently we are limited to running at a physical address that is a
multiple of 256M.  This is due to how we map TLBs to cover
lowmem.  This should be fixed to allow 64M or maybe even 16M alignment
in the future.  It is considered an error to try and run a kernel at a
non-aligned physical address.

All the magic for this support is accomplished by proper initialization
of the kernel memory subsystem and use of ARCH_PFN_OFFSET.

The use of ARCH_PFN_OFFSET only affects normal memory and not IO mappings.
ioremap uses map_page and isn't affected by ARCH_PFN_OFFSET.

/dev/mem continues to allow access to any physical address in the system
regardless of how CONFIG_PHYSICAL_START is set.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

3 files changed, 43 insertions, 13 deletions

diff --git a/include/asm-powerpc/kdump.h b/include/asm-powerpc/kdump.h
index 10e8eb1..f6c93c7 100644
--- a/include/asm-powerpc/kdump.h
+++ b/include/asm-powerpc/kdump.h
@@ -11,16 +11,11 @@
 
 #ifdef CONFIG_CRASH_DUMP
 
-#define PHYSICAL_START	KDUMP_KERNELBASE
 #define KDUMP_TRAMPOLINE_START	0x0100
 #define KDUMP_TRAMPOLINE_END	0x3000
 
 #define KDUMP_MIN_TCE_ENTRIES	2048
 
-#else /* !CONFIG_CRASH_DUMP */
-
-#define PHYSICAL_START	0x0
-
 #endif /* CONFIG_CRASH_DUMP */
 
 #ifndef __ASSEMBLY__
diff --git a/include/asm-powerpc/page.h b/include/asm-powerpc/page.h
index 6c85060..cffdf0e 100644
--- a/include/asm-powerpc/page.h
+++ b/include/asm-powerpc/page.h
@@ -12,6 +12,7 @@
 
 #include <asm/asm-compat.h>
 #include <asm/kdump.h>
+#include <asm/types.h>
 
 /*
  * On PPC32 page size is 4K. For PPC64 we support either 4K or 64K software
@@ -42,8 +43,23 @@
  *
  * The kdump dump kernel is one example where KERNELBASE != PAGE_OFFSET.
  *
- * To get a physical address from a virtual one you subtract PAGE_OFFSET,
- * _not_ KERNELBASE.
+ * PAGE_OFFSET is the virtual address of the start of lowmem.
+ *
+ * PHYSICAL_START is the physical address of the start of the kernel.
+ *
+ * MEMORY_START is the physical address of the start of lowmem.
+ *
+ * KERNELBASE, PAGE_OFFSET, and PHYSICAL_START are all configurable on
+ * ppc32 and based on how they are set we determine MEMORY_START.
+ *
+ * For the linear mapping the following equation should be true:
+ * KERNELBASE - PAGE_OFFSET = PHYSICAL_START - MEMORY_START
+ *
+ * Also, KERNELBASE >= PAGE_OFFSET and PHYSICAL_START >= MEMORY_START
+ *
+ * There are two was to determine a physical address from a virtual one:
+ * va = pa + PAGE_OFFSET - MEMORY_START
+ * va = pa + KERNELBASE - PHYSICAL_START
  *
  * If you want to know something's offset from the start of the kernel you
  * should subtract KERNELBASE.
@@ -51,20 +67,33 @@
  * If you want to test if something's a kernel address, use is_kernel_addr().
  */
 
-#define PAGE_OFFSET     ASM_CONST(CONFIG_KERNEL_START)
-#define KERNELBASE      (PAGE_OFFSET + PHYSICAL_START)
-#define LOAD_OFFSET	PAGE_OFFSET
+#define KERNELBASE      ASM_CONST(CONFIG_KERNEL_START)
+#define PAGE_OFFSET	ASM_CONST(CONFIG_PAGE_OFFSET)
+#define LOAD_OFFSET	ASM_CONST((CONFIG_KERNEL_START-CONFIG_PHYSICAL_START))
+
+#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_FLATMEM)
+#ifndef __ASSEMBLY__
+extern phys_addr_t memstart_addr;
+extern phys_addr_t kernstart_addr;
+#endif
+#define PHYSICAL_START	kernstart_addr
+#define MEMORY_START	memstart_addr
+#else
+#define PHYSICAL_START	ASM_CONST(CONFIG_PHYSICAL_START)
+#define MEMORY_START	(PHYSICAL_START + PAGE_OFFSET - KERNELBASE)
+#endif
 
 #ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn)		((pfn) < max_mapnr)
+#define ARCH_PFN_OFFSET		(MEMORY_START >> PAGE_SHIFT)
+#define pfn_valid(pfn)		((pfn) >= ARCH_PFN_OFFSET && (pfn) < (ARCH_PFN_OFFSET + max_mapnr))
 #endif
 
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 #define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
 #define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
 
-#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET))
-#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET)
+#define __va(x) ((void *)((unsigned long)(x) - PHYSICAL_START + KERNELBASE))
+#define __pa(x) ((unsigned long)(x) + PHYSICAL_START - KERNELBASE)
 
 /*
  * Unfortunately the PLT is in the BSS in the PPC32 ELF ABI,
diff --git a/include/asm-powerpc/page_32.h b/include/asm-powerpc/page_32.h
index 51f8134..ebfae53 100644
--- a/include/asm-powerpc/page_32.h
+++ b/include/asm-powerpc/page_32.h
@@ -1,6 +1,12 @@
 #ifndef _ASM_POWERPC_PAGE_32_H
 #define _ASM_POWERPC_PAGE_32_H
 
+#if defined(CONFIG_PHYSICAL_ALIGN) && (CONFIG_PHYSICAL_START != 0)
+#if (CONFIG_PHYSICAL_START % CONFIG_PHYSICAL_ALIGN) != 0
+#error "CONFIG_PHYSICAL_START must be a multiple of CONFIG_PHYSICAL_ALIGN"
+#endif
+#endif
+
 #define VM_DATA_DEFAULT_FLAGS	VM_DATA_DEFAULT_FLAGS32
 
 #ifdef CONFIG_NOT_COHERENT_CACHE