aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/filesystems/ntfs.txt42
-rw-r--r--fs/ntfs/ChangeLog38
-rw-r--r--fs/ntfs/Makefile2
-rw-r--r--fs/ntfs/file.c2247
4 files changed, 2280 insertions, 49 deletions
diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.txt
index a5fbc8e..614de31 100644
--- a/Documentation/filesystems/ntfs.txt
+++ b/Documentation/filesystems/ntfs.txt
@@ -50,9 +50,14 @@ userspace utilities, etc.
Features
========
-- This is a complete rewrite of the NTFS driver that used to be in the kernel.
- This new driver implements NTFS read support and is functionally equivalent
- to the old ntfs driver.
+- This is a complete rewrite of the NTFS driver that used to be in the 2.4 and
+ earlier kernels. This new driver implements NTFS read support and is
+ functionally equivalent to the old ntfs driver and it also implements limited
+ write support. The biggest limitation at present is that files/directories
+ cannot be created or deleted. See below for the list of write features that
+ are so far supported. Another limitation is that writing to compressed files
+ is not implemented at all. Also, neither read nor write access to encrypted
+ files is so far implemented.
- The new driver has full support for sparse files on NTFS 3.x volumes which
the old driver isn't happy with.
- The new driver supports execution of binaries due to mmap() now being
@@ -78,7 +83,20 @@ Features
- The new driver supports fsync(2), fdatasync(2), and msync(2).
- The new driver supports readv(2) and writev(2).
- The new driver supports access time updates (including mtime and ctime).
-
+- The new driver supports truncate(2) and open(2) with O_TRUNC. But at present
+ only very limited support for highly fragmented files, i.e. ones which have
+ their data attribute split across multiple extents, is included. Another
+ limitation is that at present truncate(2) will never create sparse files,
+ since to mark a file sparse we need to modify the directory entry for the
+ file and we do not implement directory modifications yet.
+- The new driver supports write(2) which can both overwrite existing data and
+ extend the file size so that you can write beyond the existing data. Also,
+ writing into sparse regions is supported and the holes are filled in with
+ clusters. But at present only limited support for highly fragmented files,
+ i.e. ones which have their data attribute split across multiple extents, is
+ included. Another limitation is that write(2) will never create sparse
+ files, since to mark a file sparse we need to modify the directory entry for
+ the file and we do not implement directory modifications yet.
Supported mount options
=======================
@@ -439,6 +457,22 @@ ChangeLog
Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog.
+2.1.25:
+ - Write support is now extended with write(2) being able to both
+ overwrite existing file data and to extend files. Also, if a write
+ to a sparse region occurs, write(2) will fill in the hole. Note,
+ mmap(2) based writes still do not support writing into holes or
+ writing beyond the initialized size.
+ - Write support has a new feature and that is that truncate(2) and
+ open(2) with O_TRUNC are now implemented thus files can be both made
+ smaller and larger.
+ - Note: Both write(2) and truncate(2)/open(2) with O_TRUNC still have
+ limitations in that they
+ - only provide limited support for highly fragmented files.
+ - only work on regular, i.e. uncompressed and unencrypted files.
+ - never create sparse files although this will change once directory
+ operations are implemented.
+ - Lots of bug fixes and enhancements across the board.
2.1.24:
- Support journals ($LogFile) which have been modified by chkdsk. This
means users can boot into Windows after we marked the volume dirty.
diff --git a/fs/ntfs/ChangeLog b/fs/ntfs/ChangeLog
index 3b8ff23..03015c7 100644
--- a/fs/ntfs/ChangeLog
+++ b/fs/ntfs/ChangeLog
@@ -1,16 +1,15 @@
ToDo/Notes:
- Find and fix bugs.
- - In between ntfs_prepare/commit_write, need exclusion between
- simultaneous file extensions. This is given to us by holding i_sem
- on the inode. The only places in the kernel when a file is resized
- are prepare/commit write and ntfs_truncate() for both of which i_sem
- is held. Just have to be careful in read-/writepage and other helpers
+ - The only places in the kernel where a file is resized are
+ ntfs_file_write*() and ntfs_truncate() for both of which i_sem is
+ held. Just have to be careful in read-/writepage and other helpers
not running under i_sem that we play nice... Also need to be careful
- with initialized_size extention in ntfs_prepare_write and writepage.
- UPDATE: The only things that need to be checked are
- prepare/commit_write as well as the compressed write and the other
- attribute resize/write cases like index attributes, etc. For now
- none of these are implemented so are safe.
+ with initialized_size extension in ntfs_file_write*() and writepage.
+ UPDATE: The only things that need to be checked are the compressed
+ write and the other attribute resize/write cases like index
+ attributes, etc. For now none of these are implemented so are safe.
+ - Implement filling in of holes in aops.c::ntfs_writepage() and its
+ helpers.
- Implement mft.c::sync_mft_mirror_umount(). We currently will just
leave the volume dirty on umount if the final iput(vol->mft_ino)
causes a write of any mirrored mft records due to the mft mirror
@@ -20,7 +19,7 @@ ToDo/Notes:
- Enable the code for setting the NT4 compatibility flag when we start
making NTFS 1.2 specific modifications.
-2.1.25-WIP
+2.1.25 - (Almost) fully implement write(2) and truncate(2).
- Change ntfs_map_runlist_nolock(), ntfs_attr_find_vcn_nolock() and
{__,}ntfs_cluster_free() to also take an optional attribute search
@@ -49,7 +48,12 @@ ToDo/Notes:
extend the allocation of an attributes. Optionally, the data size,
but not the initialized size can be extended, too.
- Implement fs/ntfs/inode.[hc]::ntfs_truncate(). It only supports
- uncompressed and unencrypted files.
+ uncompressed and unencrypted files and it never creates sparse files
+ at least for the moment (making a file sparse requires us to modify
+ its directory entries and we do not support directory operations at
+ the moment). Also, support for highly fragmented files, i.e. ones
+ whose data attribute is split across multiple extents, is severly
+ limited. When such a case is encountered, EOPNOTSUPP is returned.
- Enable ATTR_SIZE attribute changes in ntfs_setattr(). This completes
the initial implementation of file truncation. Now both open(2)ing
a file with the O_TRUNC flag and the {,f}truncate(2) system calls
@@ -61,6 +65,16 @@ ToDo/Notes:
and cond_resched() in the main loop as we could be dirtying a lot of
pages and this ensures we play nice with the VM and the system as a
whole.
+ - Implement file operations ->write, ->aio_write, ->writev for regular
+ files. This replaces the old use of generic_file_write(), et al and
+ the address space operations ->prepare_write and ->commit_write.
+ This means that both sparse and non-sparse (unencrypted and
+ uncompressed) files can now be extended using the normal write(2)
+ code path. There are two limitations at present and these are that
+ we never create sparse files and that we only have limited support
+ for highly fragmented files, i.e. ones whose data attribute is split
+ across multiple extents. When such a case is encountered,
+ EOPNOTSUPP is returned.
2.1.24 - Lots of bug fixes and support more clean journal states.
diff --git a/fs/ntfs/Makefile b/fs/ntfs/Makefile
index a3ce2c0..d0d45d1 100644
--- a/fs/ntfs/Makefile
+++ b/fs/ntfs/Makefile
@@ -6,7 +6,7 @@ ntfs-objs := aops.o attrib.o collate.o compress.o debug.o dir.o file.o \
index.o inode.o mft.o mst.o namei.o runlist.o super.o sysctl.o \
unistr.o upcase.o
-EXTRA_CFLAGS = -DNTFS_VERSION=\"2.1.25-WIP\"
+EXTRA_CFLAGS = -DNTFS_VERSION=\"2.1.25\"
ifeq ($(CONFIG_NTFS_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/fs/ntfs/file.c b/fs/ntfs/file.c
index be9fd1d..cf2a0e2 100644
--- a/fs/ntfs/file.c
+++ b/fs/ntfs/file.c
@@ -19,11 +19,24 @@
* Foundation,Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/pagemap.h>
#include <linux/buffer_head.h>
+#include <linux/pagemap.h>
+#include <linux/pagevec.h>
+#include <linux/sched.h>
+#include <linux/swap.h>
+#include <linux/uio.h>
+#include <linux/writeback.h>
+#include <asm/page.h>
+#include <asm/uaccess.h>
+
+#include "attrib.h"
+#include "bitmap.h"
#include "inode.h"
#include "debug.h"
+#include "lcnalloc.h"
+#include "malloc.h"
+#include "mft.h"
#include "ntfs.h"
/**
@@ -56,6 +69,2176 @@ static int ntfs_file_open(struct inode *vi, struct file *filp)
#ifdef NTFS_RW
/**
+ * ntfs_attr_extend_initialized - extend the initialized size of an attribute
+ * @ni: ntfs inode of the attribute to extend
+ * @new_init_size: requested new initialized size in bytes
+ * @cached_page: store any allocated but unused page here
+ * @lru_pvec: lru-buffering pagevec of the caller
+ *
+ * Extend the initialized size of an attribute described by the ntfs inode @ni
+ * to @new_init_size bytes. This involves zeroing any non-sparse space between
+ * the old initialized size and @new_init_size both in the page cache and on
+ * disk (if relevant complete pages are zeroed in the page cache then these may
+ * simply be marked dirty for later writeout). There is one caveat and that is
+ * that if any uptodate page cache pages between the old initialized size and
+ * the smaller of @new_init_size and the file size (vfs inode->i_size) are in
+ * memory, these need to be marked dirty without being zeroed since they could
+ * be non-zero due to mmap() based writes.
+ *
+ * As a side-effect, the file size (vfs inode->i_size) may be incremented as,
+ * in the resident attribute case, it is tied to the initialized size and, in
+ * the non-resident attribute case, it may not fall below the initialized size.
+ *
+ * Note that if the attribute is resident, we do not need to touch the page
+ * cache at all. This is because if the page cache page is not uptodate we
+ * bring it uptodate later, when doing the write to the mft record since we
+ * then already have the page mapped. And if the page is uptodate, the
+ * non-initialized region will already have been zeroed when the page was
+ * brought uptodate and the region may in fact already have been overwritten
+ * with new data via mmap() based writes, so we cannot just zero it. And since
+ * POSIX specifies that the behaviour of resizing a file whilst it is mmap()ped
+ * is unspecified, we choose not to do zeroing and thus we do not need to touch
+ * the page at all. For a more detailed explanation see ntfs_truncate() which
+ * is in fs/ntfs/inode.c.
+ *
+ * @cached_page and @lru_pvec are just optimisations for dealing with multiple
+ * pages.
+ *
+ * Return 0 on success and -errno on error. In the case that an error is
+ * encountered it is possible that the initialized size will already have been
+ * incremented some way towards @new_init_size but it is guaranteed that if
+ * this is the case, the necessary zeroing will also have happened and that all
+ * metadata is self-consistent.
+ *
+ * Locking: This function locks the mft record of the base ntfs inode and
+ * maintains the lock throughout execution of the function. This is required
+ * so that the initialized size of the attribute can be modified safely.
+ */
+static int ntfs_attr_extend_initialized(ntfs_inode *ni, const s64 new_init_size,
+ struct page **cached_page, struct pagevec *lru_pvec)
+{
+ s64 old_init_size;
+ loff_t old_i_size;
+ pgoff_t index, end_index;
+ unsigned long flags;
+ struct inode *vi = VFS_I(ni);
+ ntfs_inode *base_ni;
+ MFT_RECORD *m = NULL;
+ ATTR_RECORD *a;
+ ntfs_attr_search_ctx *ctx = NULL;
+ struct address_space *mapping;
+ struct page *page = NULL;
+ u8 *kattr;
+ int err;
+ u32 attr_len;
+
+ read_lock_irqsave(&ni->size_lock, flags);
+ old_init_size = ni->initialized_size;
+ old_i_size = i_size_read(vi);
+ BUG_ON(new_init_size > ni->allocated_size);
+ read_unlock_irqrestore(&ni->size_lock, flags);
+ ntfs_debug("Entering for i_ino 0x%lx, attribute type 0x%x, "
+ "old_initialized_size 0x%llx, "
+ "new_initialized_size 0x%llx, i_size 0x%llx.",
+ vi->i_ino, (unsigned)le32_to_cpu(ni->type),
+ (unsigned long long)old_init_size,
+ (unsigned long long)new_init_size, old_i_size);
+ if (!NInoAttr(ni))
+ base_ni = ni;
+ else
+ base_ni = ni->ext.base_ntfs_ino;
+ /* Use goto to reduce indentation and we need the label below anyway. */
+ if (NInoNonResident(ni))
+ goto do_non_resident_extend;
+ BUG_ON(old_init_size != old_i_size);
+ m = map_mft_record(base_ni);
+ if (IS_ERR(m)) {
+ err = PTR_ERR(m);
+ m = NULL;
+ goto err_out;
+ }
+ ctx = ntfs_attr_get_search_ctx(base_ni, m);
+ if (unlikely(!ctx)) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ err = ntfs_attr_lookup(ni->type, ni->name, ni->name_len,
+ CASE_SENSITIVE, 0, NULL, 0, ctx);
+ if (unlikely(err)) {
+ if (err == -ENOENT)
+ err = -EIO;
+ goto err_out;
+ }
+ m = ctx->mrec;
+ a = ctx->attr;
+ BUG_ON(a->non_resident);
+ /* The total length of the attribute value. */
+ attr_len = le32_to_cpu(a->data.resident.value_length);
+ BUG_ON(old_i_size != (loff_t)attr_len);
+ /*
+ * Do the zeroing in the mft record and update the attribute size in
+ * the mft record.
+ */
+ kattr = (u8*)a + le16_to_cpu(a->data.resident.value_offset);
+ memset(kattr + attr_len, 0, new_init_size - attr_len);
+ a->data.resident.value_length = cpu_to_le32((u32)new_init_size);
+ /* Finally, update the sizes in the vfs and ntfs inodes. */
+ write_lock_irqsave(&ni->size_lock, flags);
+ i_size_write(vi, new_init_size);
+ ni->initialized_size = new_init_size;
+ write_unlock_irqrestore(&ni->size_lock, flags);
+ goto done;
+do_non_resident_extend:
+ /*
+ * If the new initialized size @new_init_size exceeds the current file
+ * size (vfs inode->i_size), we need to extend the file size to the
+ * new initialized size.
+ */
+ if (new_init_size > old_i_size) {
+ m = map_mft_record(base_ni);
+ if (IS_ERR(m)) {
+ err = PTR_ERR(m);
+ m = NULL;
+ goto err_out;
+ }
+ ctx = ntfs_attr_get_search_ctx(base_ni, m);
+ if (unlikely(!ctx)) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ err = ntfs_attr_lookup(ni->type, ni->name, ni->name_len,
+ CASE_SENSITIVE, 0, NULL, 0, ctx);
+ if (unlikely(err)) {
+ if (err == -ENOENT)
+ err = -EIO;
+ goto err_out;
+ }
+ m = ctx->mrec;
+ a = ctx->attr;
+ BUG_ON(!a->non_resident);
+ BUG_ON(old_i_size != (loff_t)
+ sle64_to_cpu(a->data.non_resident.data_size));
+ a->data.non_resident.data_size = cpu_to_sle64(new_init_size);
+ flush_dcache_mft_record_page(ctx->ntfs_ino);
+ mark_mft_record_dirty(ctx->ntfs_ino);
+ /* Update the file size in the vfs inode. */
+ i_size_write(vi, new_init_size);
+ ntfs_attr_put_search_ctx(ctx);
+ ctx = NULL;
+ unmap_mft_record(base_ni);
+ m = NULL;
+ }
+ mapping = vi->i_mapping;
+ index = old_init_size >> PAGE_CACHE_SHIFT;
+ end_index = (new_init_size + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
+ do {
+ /*
+ * Read the page. If the page is not present, this will zero
+ * the uninitialized regions for us.
+ */
+ page = read_cache_page(mapping, index,
+ (filler_t*)mapping->a_ops->readpage, NULL);
+ if (IS_ERR(page)) {
+ err = PTR_ERR(page);
+ goto init_err_out;
+ }
+ wait_on_page_locked(page);
+ if (unlikely(!PageUptodate(page) || PageError(page))) {
+ page_cache_release(page);
+ err = -EIO;
+ goto init_err_out;
+ }
+ /*
+ * Update the initialized size in the ntfs inode. This is
+ * enough to make ntfs_writepage() work.
+ */
+ write_lock_irqsave(&ni->size_lock, flags);
+ ni->initialized_size = (index + 1) << PAGE_CACHE_SHIFT;
+ if (ni->initialized_size > new_init_size)
+ ni->initialized_size = new_init_size;
+ write_unlock_irqrestore(&ni->size_lock, flags);
+ /* Set the page dirty so it gets written out. */
+ set_page_dirty(page);
+ page_cache_release(page);
+ /*
+ * Play nice with the vm and the rest of the system. This is
+ * very much needed as we can potentially be modifying the
+ * initialised size from a very small value to a really huge
+ * value, e.g.
+ * f = open(somefile, O_TRUNC);
+ * truncate(f, 10GiB);
+ * seek(f, 10GiB);
+ * write(f, 1);
+ * And this would mean we would be marking dirty hundreds of
+ * thousands of pages or as in the above example more than
+ * two and a half million pages!
+ *
+ * TODO: For sparse pages could optimize this workload by using
+ * the FsMisc / MiscFs page bit as a "PageIsSparse" bit. This
+ * would be set in readpage for sparse pages and here we would
+ * not need to mark dirty any pages which have this bit set.
+ * The only caveat is that we have to clear the bit everywhere
+ * where we allocate any clusters that lie in the page or that
+ * contain the page.
+ *
+ * TODO: An even greater optimization would be for us to only
+ * call readpage() on pages which are not in sparse regions as
+ * determined from the runlist. This would greatly reduce the
+ * number of pages we read and make dirty in the case of sparse
+ * files.
+ */
+ balance_dirty_pages_ratelimited(mapping);
+ cond_resched();
+ } while (++index < end_index);
+ read_lock_irqsave(&ni->size_lock, flags);
+ BUG_ON(ni->initialized_size != new_init_size);
+ read_unlock_irqrestore(&ni->size_lock, flags);
+ /* Now bring in sync the initialized_size in the mft record. */
+ m = map_mft_record(base_ni);
+ if (IS_ERR(m)) {
+ err = PTR_ERR(m);
+ m = NULL;
+ goto init_err_out;
+ }
+ ctx = ntfs_attr_get_search_ctx(base_ni, m);
+ if (unlikely(!ctx)) {
+ err = -ENOMEM;
+ goto init_err_out;
+ }
+ err = ntfs_attr_lookup(ni->type, ni->name, ni->name_len,
+ CASE_SENSITIVE, 0, NULL, 0, ctx);
+ if (unlikely(err)) {
+ if (err == -ENOENT)
+ err = -EIO;
+ goto init_err_out;
+ }
+ m = ctx->mrec;
+ a = ctx->attr;
+ BUG_ON(!a->non_resident);
+ a->data.non_resident.initialized_size = cpu_to_sle64(new_init_size);
+done:
+ flush_dcache_mft_record_page(ctx->ntfs_ino);
+ mark_mft_record_dirty(ctx->ntfs_ino);
+ if (ctx)
+ ntfs_attr_put_search_ctx(ctx);
+ if (m)
+ unmap_mft_record(base_ni);
+ ntfs_debug("Done, initialized_size 0x%llx, i_size 0x%llx.",
+ (unsigned long long)new_init_size, i_size_read(vi));
+ return 0;
+init_err_out:
+ write_lock_irqsave(&ni->size_lock, flags);
+ ni->initialized_size = old_init_size;
+ write_unlock_irqrestore(&ni->size_lock, flags);
+err_out:
+ if (ctx)
+ ntfs_attr_put_search_ctx(ctx);
+ if (m)
+ unmap_mft_record(base_ni);
+ ntfs_debug("Failed. Returning error code %i.", err);
+ return err;
+}
+
+/**
+ * ntfs_fault_in_pages_readable -
+ *
+ * Fault a number of userspace pages into pagetables.
+ *
+ * Unlike include/linux/pagemap.h::fault_in_pages_readable(), this one copes
+ * with more than two userspace pages as well as handling the single page case
+ * elegantly.
+ *
+ * If you find this difficult to understand, then think of the while loop being
+ * the following code, except that we do without the integer variable ret:
+ *
+ * do {
+ * ret = __get_user(c, uaddr);
+ * uaddr += PAGE_SIZE;
+ * } while (!ret && uaddr < end);
+ *
+ * Note, the final __get_user() may well run out-of-bounds of the user buffer,
+ * but _not_ out-of-bounds of the page the user buffer belongs to, and since
+ * this is only a read and not a write, and since it is still in the same page,
+ * it should not matter and this makes the code much simpler.
+ */
+static inline void ntfs_fault_in_pages_readable(const char __user *uaddr,
+ int bytes)
+{
+ const char __user *end;
+ volatile char c;
+
+ /* Set @end to the first byte outside the last page we care about. */
+ end = (const char __user*)PAGE_ALIGN((ptrdiff_t __user)uaddr + bytes);
+
+ while (!__get_user(c, uaddr) && (uaddr += PAGE_SIZE, uaddr < end))
+ ;
+}
+
+/**
+ * ntfs_fault_in_pages_readable_iovec -
+ *
+ * Same as ntfs_fault_in_pages_readable() but operates on an array of iovecs.
+ */
+static inline void ntfs_fault_in_pages_readable_iovec(const struct iovec *iov,
+ size_t iov_ofs, int bytes)
+{
+ do {
+ const char __user *buf;
+ unsigned len;
+
+ buf = iov->iov_base + iov_ofs;
+ len = iov->iov_len - iov_ofs;
+ if (len > bytes)
+ len = bytes;
+ ntfs_fault_in_pages_readable(buf, len);
+ bytes -= len;
+ iov++;
+ iov_ofs = 0;
+ } while (bytes);
+}
+
+/**
+ * __ntfs_grab_cache_pages - obtain a number of locked pages
+ * @mapping: address space mapping from which to obtain page cache pages
+ * @index: starting index in @mapping at which to begin obtaining pages
+ * @nr_pages: number of page cache pages to obtain
+ * @pages: array of pages in which to return the obtained page cache pages
+ * @cached_page: allocated but as yet unused page
+ * @lru_pvec: lru-buffering pagevec of caller
+ *
+ * Obtain @nr_pages locked page cache pages from the mapping @maping and
+ * starting at index @index.
+ *
+ * If a page is newly created, increment its refcount and add it to the
+ * caller's lru-buffering pagevec @lru_pvec.
+ *
+ * This is the same as mm/filemap.c::__grab_cache_page(), except that @nr_pages
+ * are obtained at once instead of just one page and that 0 is returned on
+ * success and -errno on error.
+ *
+ * Note, the page locks are obtained in ascending page index order.
+ */
+static inline int __ntfs_grab_cache_pages(struct address_space *mapping,
+ pgoff_t index, const unsigned nr_pages, struct page **pages,
+ struct page **cached_page, struct pagevec *lru_pvec)
+{
+ int err, nr;
+
+ BUG_ON(!nr_pages);
+ err = nr = 0;
+ do {
+ pages[nr] = find_lock_page(mapping, index);
+ if (!pages[nr]) {
+ if (!*cached_page) {
+ *cached_page = page_cache_alloc(mapping);
+ if (unlikely(!*cached_page)) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ }
+ err = add_to_page_cache(*cached_page, mapping, index,
+ GFP_KERNEL);
+ if (unlikely(err)) {
+ if (err == -EEXIST)
+ continue;
+ goto err_out;
+ }
+ pages[nr] = *cached_page;
+ page_cache_get(*cached_page);
+ if (unlikely(!pagevec_add(lru_pvec, *cached_page)))
+ __pagevec_lru_add(lru_pvec);
+ *cached_page = NULL;
+ }
+ index++;
+ nr++;
+ } while (nr < nr_pages);
+out:
+ return err;
+err_out:
+ while (nr > 0) {
+ unlock_page(pages[--nr]);
+ page_cache_release(pages[nr]);
+ }
+ goto out;
+}
+
+static inline int ntfs_submit_bh_for_read(struct buffer_head *bh)
+{
+ lock_buffer(bh);
+ get_bh(bh);
+ bh->b_end_io = end_buffer_read_sync;
+ return submit_bh(READ, bh);
+}
+
+/**
+ * ntfs_prepare_pages_for_non_resident_write - prepare pages for receiving data
+ * @pages: array of destination pages
+ * @nr_pages: number of pages in @pages
+ * @pos: byte position in file at which the write begins
+ * @bytes: number of bytes to be written
+ *
+ * This is called for non-resident attributes from ntfs_file_buffered_write()
+ * with i_sem held on the inode (@pages[0]->mapping->host). There are
+ * @nr_pages pages in @pages which are locked but not kmap()ped. The source
+ * data has not yet been copied into the @pages.
+ *
+ * Need to fill any holes with actual clusters, allocate buffers if necessary,
+ * ensure all the buffers are mapped, and bring uptodate any buffers that are
+ * only partially being written to.
+ *
+ * If @nr_pages is greater than one, we are guaranteed that the cluster size is
+ * greater than PAGE_CACHE_SIZE, that all pages in @pages are entirely inside
+ * the same cluster and that they are the entirety of that cluster, and that
+ * the cluster is sparse, i.e. we need to allocate a cluster to fill the hole.
+ *
+ * i_size is not to be modified yet.
+ *
+ * Return 0 on success or -errno on error.
+ */
+static int ntfs_prepare_pages_for_non_resident_write(struct page **pages,
+ unsigned nr_pages, s64 pos, size_t bytes)
+{
+ VCN vcn, highest_vcn = 0, cpos, cend, bh_cpos, bh_cend;
+ LCN lcn;
+ s64 bh_pos, vcn_len, end, initialized_size;
+ sector_t lcn_block;
+ struct page *page;
+ struct inode *vi;
+ ntfs_inode *ni, *base_ni = NULL;
+ ntfs_volume *vol;
+ runlist_element *rl, *rl2;
+ struct buffer_head *bh, *head, *wait[2], **wait_bh = wait;
+ ntfs_attr_search_ctx *ctx = NULL;
+ MFT_RECORD *m = NULL;
+ ATTR_RECORD *a = NULL;
+ unsigned long flags;
+ u32 attr_rec_len = 0;
+ unsigned blocksize, u;
+ int err, mp_size;
+ BOOL rl_write_locked, was_hole, is_retry;
+ unsigned char blocksize_bits;
+ struct {
+ u8 runlist_merged:1;
+ u8 mft_attr_mapped:1;
+ u8 mp_rebuilt:1;
+ u8 attr_switched:1;
+ } status = { 0, 0, 0, 0 };
+
+ BUG_ON(!nr_pages);
+ BUG_ON(!pages);
+ BUG_ON(!*pages);
+ vi = pages[0]->mapping->host;
+ ni = NTFS_I(vi);
+ vol = ni->vol;
+ ntfs_debug("Entering for inode 0x%lx, attribute type 0x%x, start page "
+ "index 0x%lx, nr_pages 0x%x, pos 0x%llx, bytes 0x%x.",
+ vi->i_ino, ni->type, pages[0]->index, nr_pages,
+ (long long)pos, bytes);
+ blocksize_bits = vi->i_blkbits;
+ blocksize = 1 << blocksize_bits;
+ u = 0;
+ do {
+ struct page *page = pages[u];
+ /*
+ * create_empty_buffers() will create uptodate/dirty buffers if
+ * the page is uptodate/dirty.
+ */
+ if (!page_has_buffers(page)) {
+ create_empty_buffers(page, blocksize, 0);
+ if (unlikely(!page_has_buffers(page)))
+ return -ENOMEM;
+ }
+ } while (++u < nr_pages);
+ rl_write_locked = FALSE;
+ rl = NULL;
+ err = 0;
+ vcn = lcn = -1;
+ vcn_len = 0;
+ lcn_block = -1;
+ was_hole = FALSE;
+ cpos = pos >> vol->cluster_size_bits;
+ end = pos + bytes;
+ cend = (end + vol->cluster_size - 1) >> vol->cluster_size_bits;
+ /*
+ * Loop over each page and for each page over each buffer. Use goto to
+ * reduce indentation.
+ */
+ u = 0;
+do_next_page:
+ page = pages[u];
+ bh_pos = (s64)page->index << PAGE_CACHE_SHIFT;
+ bh = head = page_buffers(page);
+ do {
+ VCN cdelta;
+ s64 bh_end;
+ unsigned bh_cofs;
+
+ /* Clear buffer_new on all buffers to reinitialise state. */
+ if (buffer_new(bh))
+ clear_buffer_new(bh);
+ bh_end = bh_pos + blocksize;
+ bh_cpos = bh_pos >> vol->cluster_size_bits;
+ bh_cofs = bh_pos & vol->cluster_size_mask;
+ if (buffer_mapped(bh)) {
+ /*
+ * The buffer is already mapped. If it is uptodate,
+ * ignore it.
+ */
+ if (buffer_uptodate(bh))
+ continue;
+ /*
+ * The buffer is not uptodate. If the page is uptodate
+ * set the buffer uptodate and otherwise ignore it.
+ */
+ if (PageUptodate(page)) {
+ set_buffer_uptodate(bh);
+ continue;
+ }
+ /*
+ * Neither the page nor the buffer are uptodate. If
+ * the buffer is only partially being written to, we
+ * need to read it in before the write, i.e. now.
+ */
+ if ((bh_pos < pos && bh_end > pos) ||
+ (bh_pos < end && bh_end > end)) {
+ /*
+ * If the buffer is fully or partially within
+ * the initialized size, do an actual read.
+ * Otherwise, simply zero the buffer.
+ */
+ read_lock_irqsave(&ni->size_lock, flags);
+ initialized_size = ni->initialized_size;
+ read_unlock_irqrestore(&ni->size_lock, flags);
+ if (bh_pos < initialized_size) {
+ ntfs_submit_bh_for_read(bh);
+ *wait_bh++ = bh;
+ } else {
+ u8 *kaddr = kmap_atomic(page, KM_USER0);
+ memset(kaddr + bh_offset(bh), 0,
+ blocksize);
+ kunmap_atomic(kaddr, KM_USER0);
+ flush_dcache_page(page);
+ set_buffer_uptodate(bh);
+ }
+ }
+ continue;
+ }
+ /* Unmapped buffer. Need to map it. */
+ bh->b_bdev = vol->sb->s_bdev;
+ /*
+ * If the current buffer is in the same clusters as the map
+ * cache, there is no need to check the runlist again. The
+ * map cache is made up of @vcn, which is the first cached file
+ * cluster, @vcn_len which is the number of cached file
+ * clusters, @lcn is the device cluster corresponding to @vcn,
+ * and @lcn_block is the block number corresponding to @lcn.
+ */
+ cdelta = bh_cpos - vcn;
+ if (likely(!cdelta || (cdelta > 0 && cdelta < vcn_len))) {
+map_buffer_cached:
+ BUG_ON(lcn < 0);
+ bh->b_blocknr = lcn_block +
+ (cdelta << (vol->cluster_size_bits -
+ blocksize_bits)) +
+ (bh_cofs >> blocksize_bits);
+ set_buffer_mapped(bh);
+ /*
+ * If the page is uptodate so is the buffer. If the
+ * buffer is fully outside the write, we ignore it if
+ * it was already allocated and we mark it dirty so it
+ * gets written out if we allocated it. On the other
+ * hand, if we allocated the buffer but we are not
+ * marking it dirty we set buffer_new so we can do
+ * error recovery.
+ */
+ if (PageUptodate(page)) {
+ if (!buffer_uptodate(bh))
+ set_buffer_uptodate(bh);
+ if (unlikely(was_hole)) {
+ /* We allocated the buffer. */
+ unmap_underlying_metadata(bh->b_bdev,
+ bh->b_blocknr);
+ if (bh_end <= pos || bh_pos >= end)
+ mark_buffer_dirty(bh);
+ else
+ set_buffer_new(bh);
+ }
+ continue;
+ }
+ /* Page is _not_ uptodate. */
+ if (likely(!was_hole)) {
+ /*
+ * Buffer was already allocated. If it is not
+ * uptodate and is only partially being written
+ * to, we need to read it in before the write,
+ * i.e. now.
+ */
+ if (!buffer_uptodate(bh) && ((bh_pos < pos &&
+ bh_end > pos) ||
+ (bh_end > end &&
+ bh_end > end))) {
+ /*
+ * If the buffer is fully or partially
+ * within the initialized size, do an
+ * actual read. Otherwise, simply zero
+ * the buffer.
+ */
+ read_lock_irqsave(&ni->size_lock,
+ flags);
+ initialized_size = ni->initialized_size;
+ read_unlock_irqrestore(&ni->size_lock,
+ flags);
+ if (bh_pos < initialized_size) {
+ ntfs_submit_bh_for_read(bh);
+ *wait_bh++ = bh;
+ } else {
+ u8 *kaddr = kmap_atomic(page,
+ KM_USER0);
+ memset(kaddr + bh_offset(bh),
+ 0, blocksize);
+ kunmap_atomic(kaddr, KM_USER0);
+ flush_dcache_page(page);
+ set_buffer_uptodate(bh);
+ }
+ }
+ continue;
+ }
+ /* We allocated the buffer. */
+ unmap_underlying_metadata(bh->b_bdev, bh->b_blocknr);
+ /*
+ * If the buffer is fully outside the write, zero it,
+ * set it uptodate, and mark it dirty so it gets
+ * written out. If it is partially being written to,
+ * zero region surrounding the write but leave it to
+ * commit write to do anything else. Finally, if the
+ * buffer is fully being overwritten, do nothing.
+ */
+ if (bh_end <= pos || bh_pos >= end) {
+ if (!buffer_uptodate(bh)) {
+ u8 *kaddr = kmap_atomic(page, KM_USER0);
+ memset(kaddr + bh_offset(bh), 0,
+ blocksize);
+ kunmap_atomic(kaddr, KM_USER0);
+ flush_dcache_page(page);
+ set_buffer_uptodate(bh);
+ }
+ mark_buffer_dirty(bh);
+ continue;
+ }
+ set_buffer_new(bh);
+ if (!buffer_uptodate(bh) &&
+ (bh_pos < pos || bh_end > end)) {
+ u8 *kaddr;
+ unsigned pofs;
+
+ kaddr = kmap_atomic(page, KM_USER0);
+ if (bh_pos < pos) {
+ pofs = bh_pos & ~PAGE_CACHE_MASK;
+ memset(kaddr + pofs, 0, pos - bh_pos);
+ }
+ if (bh_end > end) {
+ pofs = end & ~PAGE_CACHE_MASK;
+ memset(kaddr + pofs, 0, bh_end - end);
+ }
+ kunmap_atomic(kaddr, KM_USER0);
+ flush_dcache_page(page);
+ }
+ continue;
+ }
+ /*
+ * Slow path: this is the first buffer in the cluster. If it
+ * is outside allocated size and is not uptodate, zero it and
+ * set it uptodate.
+ */
+ read_lock_irqsave(&ni->size_lock, flags);
+ initialized_size = ni->allocated_size;
+ read_unlock_irqrestore(&ni->size_lock, flags);
+ if (bh_pos > initialized_size) {
+ if (PageUptodate(page)) {
+ if (!buffer_uptodate(bh))
+ set_buffer_uptodate(bh);
+ } else if (!buffer_uptodate(bh)) {
+ u8 *kaddr = kmap_atomic(page, KM_USER0);
+ memset(kaddr + bh_offset(bh), 0, blocksize);
+ kunmap_atomic(kaddr, KM_USER0);
+ flush_dcache_page(page);
+ set_buffer_uptodate(bh);
+ }
+ continue;
+ }
+ is_retry = FALSE;
+ if (!rl) {
+ down_read(&ni->runlist.lock);
+retry_remap:
+ rl = ni->runlist.rl;
+ }
+ if (likely(rl != NULL)) {
+ /* Seek to element containing target cluster. */
+ while (rl->length && rl[1].vcn <= bh_cpos)
+ rl++;
+ lcn = ntfs_rl_vcn_to_lcn(rl, bh_cpos);
+ if (likely(lcn >= 0)) {
+ /*
+ * Successful remap, setup the map cache and
+ * use that to deal with the buffer.
+ */
+ was_hole = FALSE;
+ vcn = bh_cpos;
+ vcn_len = rl[1].vcn - vcn;
+ lcn_block = lcn << (vol->cluster_size_bits -
+ blocksize_bits);
+ /*
+ * If the number of remaining clusters in the
+ * @pages is smaller or equal to the number of
+ * cached clusters, unlock the runlist as the
+ * map cache will be used from now on.
+ */
+ if (likely(vcn + vcn_len >= cend)) {
+ if (rl_write_locked) {
+ up_write(&ni->runlist.lock);
+ rl_write_locked = FALSE;
+ } else
+ up_read(&ni->runlist.lock);
+ rl = NULL;
+ }
+ goto map_buffer_cached;
+ }
+ } else
+ lcn = LCN_RL_NOT_MAPPED;
+ /*
+ * If it is not a hole and not out of bounds, the runlist is
+ * probably unmapped so try to map it now.
+ */
+ if (unlikely(lcn != LCN_HOLE && lcn != LCN_ENOENT)) {
+ if (likely(!is_retry && lcn == LCN_RL_NOT_MAPPED)) {
+ /* Attempt to map runlist. */
+ if (!rl_write_locked) {
+ /*
+ * We need the runlist locked for
+ * writing, so if it is locked for
+ * reading relock it now and retry in
+ * case it changed whilst we dropped
+ * the lock.
+ */
+ up_read(&ni->runlist.lock);
+ down_write(&ni->runlist.lock);
+ rl_write_locked = TRUE;
+ goto retry_remap;
+ }
+ err = ntfs_map_runlist_nolock(ni, bh_cpos,
+ NULL);
+ if (likely(!err)) {
+ is_retry = TRUE;
+ goto retry_remap;
+ }
+ /*
+ * If @vcn is out of bounds, pretend @lcn is
+ * LCN_ENOENT. As long as the buffer is out
+ * of bounds this will work fine.
+ */
+ if (err == -ENOENT) {
+ lcn = LCN_ENOENT;
+ err = 0;
+ goto rl_not_mapped_enoent;
+ }
+ } else
+ err = -EIO;
+ /* Failed to map the buffer, even after retrying. */
+ bh->b_blocknr = -1;
+ ntfs_error(vol->sb, "Failed to write to inode 0x%lx, "
+ "attribute type 0x%x, vcn 0x%llx, "
+ "vcn offset 0x%x, because its "
+ "location on disk could not be "
+ "determined%s (error code %i).",
+ ni->mft_no, ni->type,
+ (unsigned long long)bh_cpos,
+ (unsigned)bh_pos &
+ vol->cluster_size_mask,
+ is_retry ? " even after retrying" : "",
+ err);
+ break;
+ }
+rl_not_mapped_enoent:
+ /*
+ * The buffer is in a hole or out of bounds. We need to fill
+ * the hole, unless the buffer is in a cluster which is not
+ * touched by the write, in which case we just leave the buffer
+ * unmapped. This can only happen when the cluster size is
+ * less than the page cache size.
+ */
+ if (unlikely(vol->cluster_size < PAGE_CACHE_SIZE)) {
+ bh_cend = (bh_end + vol->cluster_size - 1) >>
+ vol->cluster_size_bits;
+ if ((bh_cend <= cpos || bh_cpos >= cend)) {
+ bh->b_blocknr = -1;
+ /*
+ * If the buffer is uptodate we skip it. If it
+ * is not but the page is uptodate, we can set
+ * the buffer uptodate. If the page is not
+ * uptodate, we can clear the buffer and set it
+ * uptodate. Whether this is worthwhile is
+ * debatable and this could be removed.
+ */
+ if (PageUptodate(page)) {
+ if (!buffer_uptodate(bh))
+ set_buffer_uptodate(bh);
+ } else if (!buffer_uptodate(bh)) {
+ u8 *kaddr = kmap_atomic(page, KM_USER0);
+ memset(kaddr + bh_offset(bh), 0,
+ blocksize);
+ kunmap_atomic(kaddr, KM_USER0);
+ flush_dcache_page(page);
+ set_buffer_uptodate(bh);
+ }
+ continue;
+ }
+ }
+ /*
+ * Out of bounds buffer is invalid if it was not really out of
+ * bounds.
+ */
+ BUG_ON(lcn != LCN_HOLE);
+ /*
+ * We need the runlist locked for writing, so if it is locked
+ * for reading relock it now and retry in case it changed
+ * whilst we dropped the lock.
+ */
+ BUG_ON(!rl);
+ if (!rl_write_locked) {
+ up_read(&ni->runlist.lock);
+ down_write(&ni->runlist.lock);
+ rl_write_locked = TRUE;
+ goto retry_remap;
+ }
+ /* Find the previous last allocated cluster. */
+ BUG_ON(rl->lcn != LCN_HOLE);
+ lcn = -1;
+ rl2 = rl;
+ while (--rl2 >= ni->runlist.rl) {
+ if (rl2->lcn >= 0) {
+ lcn = rl2->lcn + rl2->length;
+ break;
+ }
+ }
+ rl2 = ntfs_cluster_alloc(vol, bh_cpos, 1, lcn, DATA_ZONE,
+ FALSE);
+ if (IS_ERR(rl2)) {
+ err = PTR_ERR(rl2);
+ ntfs_debug("Failed to allocate cluster, error code %i.",
+ err);
+ break;
+ }
+ lcn = rl2->lcn;
+ rl = ntfs_runlists_merge(ni->runlist.rl, rl2);
+ if (IS_ERR(rl)) {
+ err = PTR_ERR(rl);
+ if (err != -ENOMEM)
+ err = -EIO;
+ if (ntfs_cluster_free_from_rl(vol, rl2)) {
+ ntfs_error(vol->sb, "Failed to release "
+ "allocated cluster in error "
+ "code path. Run chkdsk to "
+ "recover the lost cluster.");
+ NVolSetErrors(vol);
+ }
+ ntfs_free(rl2);
+ break;
+ }
+ ni->runlist.rl = rl;
+ status.runlist_merged = 1;
+ ntfs_debug("Allocated cluster, lcn 0x%llx.", lcn);
+ /* Map and lock the mft record and get the attribute record. */
+ if (!NInoAttr(ni))
+ base_ni = ni;
+ else
+ base_ni = ni->ext.base_ntfs_ino;
+ m = map_mft_record(base_ni);
+ if (IS_ERR(m)) {
+ err = PTR_ERR(m);
+ break;
+ }
+ ctx = ntfs_attr_get_search_ctx(base_ni, m);
+ if (unlikely(!ctx)) {
+ err = -ENOMEM;
+ unmap_mft_record(base_ni);
+ break;
+ }
+ status.mft_attr_mapped = 1;
+ err = ntfs_attr_lookup(ni->type, ni->name, ni->name_len,
+ CASE_SENSITIVE, bh_cpos, NULL, 0, ctx);
+ if (unlikely(err)) {
+ if (err == -ENOENT)
+ err = -EIO;
+ break;
+ }
+ m = ctx->mrec;
+ a = ctx->attr;
+ /*
+ * Find the runlist element with which the attribute extent
+ * starts. Note, we cannot use the _attr_ version because we
+ * have mapped the mft record. That is ok because we know the
+ * runlist fragment must be mapped already to have ever gotten
+ * here, so we can just use the _rl_ version.
+ */
+ vcn = sle64_to_cpu(a->data.non_resident.lowest_vcn);
+ rl2 = ntfs_rl_find_vcn_nolock(rl, vcn);
+ BUG_ON(!rl2);
+ BUG_ON(!rl2->length);
+ BUG_ON(rl2->lcn < LCN_HOLE);
+ highest_vcn = sle64_to_cpu(a->data.non_resident.highest_vcn);
+ /*
+ * If @highest_vcn is zero, calculate the real highest_vcn
+ * (which can really be zero).
+ */
+ if (!highest_vcn)
+ highest_vcn = (sle64_to_cpu(
+ a->data.non_resident.allocated_size) >>
+ vol->cluster_size_bits) - 1;
+ /*
+ * Determine the size of the mapping pairs array for the new
+ * extent, i.e. the old extent with the hole filled.
+ */
+ mp_size = ntfs_get_size_for_mapping_pairs(vol, rl2, vcn,
+ highest_vcn);
+ if (unlikely(mp_size <= 0)) {
+ if (!(err = mp_size))
+ err = -EIO;
+ ntfs_debug("Failed to get size for mapping pairs "
+ "array, error code %i.", err);
+ break;
+ }
+ /*
+ * Resize the attribute record to fit the new mapping pairs
+ * array.
+ */
+ attr_rec_len = le32_to_cpu(a->length);
+ err = ntfs_attr_record_resize(m, a, mp_size + le16_to_cpu(
+ a->data.non_resident.mapping_pairs_offset));
+ if (unlikely(err)) {
+ BUG_ON(err != -ENOSPC);
+ // TODO: Deal with this by using the current attribute
+ // and fill it with as much of the mapping pairs
+ // array as possible. Then loop over each attribute
+ // extent rewriting the mapping pairs arrays as we go
+ // along and if when we reach the end we have not
+ // enough space, try to resize the last attribute
+ // extent and if even that fails, add a new attribute
+ // extent.
+ // We could also try to resize at each step in the hope
+ // that we will not need to rewrite every single extent.
+ // Note, we may need to decompress some extents to fill
+ // the runlist as we are walking the extents...
+ ntfs_error(vol->sb, "Not enough space in the mft "
+ "record for the extended attribute "
+ "record. This case is not "
+ "implemented yet.");
+ err = -EOPNOTSUPP;
+ break ;
+ }
+ status.mp_rebuilt = 1;
+ /*
+ * Generate the mapping pairs array directly into the attribute
+ * record.
+ */
+ err = ntfs_mapping_pairs_build(vol, (u8*)a + le16_to_cpu(
+ a->data.non_resident.mapping_pairs_offset),
+ mp_size, rl2, vcn, highest_vcn, NULL);
+ if (unlikely(err)) {
+ ntfs_error(vol->sb, "Cannot fill hole in inode 0x%lx, "
+ "attribute type 0x%x, because building "
+ "the mapping pairs failed with error "
+ "code %i.", vi->i_ino,
+ (unsigned)le32_to_cpu(ni->type), err);
+ err = -EIO;
+ break;
+ }
+ /* Update the highest_vcn but only if it was not set. */
+ if (unlikely(!a->data.non_resident.highest_vcn))
+ a->data.non_resident.highest_vcn =
+ cpu_to_sle64(highest_vcn);
+ /*
+ * If the attribute is sparse/compressed, update the compressed
+ * size in the ntfs_inode structure and the attribute record.
+ */
+ if (likely(NInoSparse(ni) || NInoCompressed(ni))) {
+ /*
+ * If we are not in the first attribute extent, switch
+ * to it, but first ensure the changes will make it to
+ * disk later.
+ */
+ if (a->data.non_resident.lowest_vcn) {
+ flush_dcache_mft_record_page(ctx->ntfs_ino);
+ mark_mft_record_dirty(ctx->ntfs_ino);
+ ntfs_attr_reinit_search_ctx(ctx);
+ err = ntfs_attr_lookup(ni->type, ni->name,
+ ni->name_len, CASE_SENSITIVE,
+ 0, NULL, 0, ctx);
+ if (unlikely(err)) {
+ status.attr_switched = 1;
+ break;
+ }
+ /* @m is not used any more so do not set it. */
+ a = ctx->attr;
+ }
+ write_lock_irqsave(&ni->size_lock, flags);
+ ni->itype.compressed.size += vol->cluster_size;
+ a->data.non_resident.compressed_size =
+ cpu_to_sle64(ni->itype.compressed.size);
+ write_unlock_irqrestore(&ni->size_lock, flags);
+ }
+ /* Ensure the changes make it to disk. */
+ flush_dcache_mft_record_page(ctx->ntfs_ino);
+ mark_mft_record_dirty(ctx->ntfs_ino);
+ ntfs_attr_put_search_ctx(ctx);
+ unmap_mft_record(base_ni);
+ /* Successfully filled the hole. */
+ status.runlist_merged = 0;
+ status.mft_attr_mapped = 0;
+ status.mp_rebuilt = 0;
+ /* Setup the map cache and use that to deal with the buffer. */
+ was_hole = TRUE;
+ vcn = bh_cpos;
+ vcn_len = 1;
+ lcn_block = lcn << (vol->cluster_size_bits - blocksize_bits);
+ cdelta = 0;
+ /*
+ * If the number of remaining clusters in the @pages is smaller
+ * or equal to the number of cached clusters, unlock the
+ * runlist as the map cache will be used from now on.
+ */
+ if (likely(vcn + vcn_len >= cend)) {
+ up_write(&ni->runlist.lock);
+ rl_write_locked = FALSE;
+ rl = NULL;
+ }
+ goto map_buffer_cached;
+ } while (bh_pos += blocksize, (bh = bh->b_this_page) != head);
+ /* If there are no errors, do the next page. */
+ if (likely(!err && ++u < nr_pages))
+ goto do_next_page;
+ /* If there are no errors, release the runlist lock if we took it. */
+ if (likely(!err)) {
+ if (unlikely(rl_write_locked)) {
+ up_write(&ni->runlist.lock);
+ rl_write_locked = FALSE;
+ } else if (unlikely(rl))
+ up_read(&ni->runlist.lock);
+ rl = NULL;
+ }
+ /* If we issued read requests, let them complete. */
+ read_lock_irqsave(&ni->size_lock, flags);
+ initialized_size = ni->initialized_size;
+ read_unlock_irqrestore(&ni->size_lock, flags);
+ while (wait_bh > wait) {
+ bh = *--wait_bh;
+ wait_on_buffer(bh);
+ if (likely(buffer_uptodate(bh))) {
+ page = bh->b_page;
+ bh_pos = ((s64)page->index << PAGE_CACHE_SHIFT) +
+ bh_offset(bh);
+ /*
+ * If the buffer overflows the initialized size, need
+ * to zero the overflowing region.
+ */
+ if (unlikely(bh_pos + blocksize > initialized_size)) {
+ u8 *kaddr;
+ int ofs = 0;
+
+ if (likely(bh_pos < initialized_size))
+ ofs = initialized_size - bh_pos;
+ kaddr = kmap_atomic(page, KM_USER0);
+ memset(kaddr + bh_offset(bh) + ofs, 0,
+ blocksize - ofs);
+ kunmap_atomic(kaddr, KM_USER0);
+ flush_dcache_page(page);
+ }
+ } else /* if (unlikely(!buffer_uptodate(bh))) */
+ err = -EIO;
+ }
+ if (likely(!err)) {
+ /* Clear buffer_new on all buffers. */
+ u = 0;
+ do {
+ bh = head = page_buffers(pages[u]);
+ do {
+ if (buffer_new(bh))
+ clear_buffer_new(bh);
+ } while ((bh = bh->b_this_page) != head);
+ } while (++u < nr_pages);
+ ntfs_debug("Done.");
+ return err;
+ }
+ if (status.attr_switched) {
+ /* Get back to the attribute extent we modified. */
+ ntfs_attr_reinit_search_ctx(ctx);
+ if (ntfs_attr_lookup(ni->type, ni->name, ni->name_len,
+ CASE_SENSITIVE, bh_cpos, NULL, 0, ctx)) {
+ ntfs_error(vol->sb, "Failed to find required "
+ "attribute extent of attribute in "
+ "error code path. Run chkdsk to "
+ "recover.");
+ write_lock_irqsave(&ni->size_lock, flags);
+ ni->itype.compressed.size += vol->cluster_size;
+ write_unlock_irqrestore(&ni->size_lock, flags);
+ flush_dcache_mft_record_page(ctx->ntfs_ino);
+ mark_mft_record_dirty(ctx->ntfs_ino);
+ /*
+ * The only thing that is now wrong is the compressed
+ * size of the base attribute extent which chkdsk
+ * should be able to fix.
+ */
+ NVolSetErrors(vol);
+ } else {
+ m = ctx->mrec;
+ a = ctx->attr;
+ status.attr_switched = 0;
+ }
+ }
+ /*
+ * If the runlist has been modified, need to restore it by punching a
+ * hole into it and we then need to deallocate the on-disk cluster as
+ * well. Note, we only modify the runlist if we are able to generate a
+ * new mapping pairs array, i.e. only when the mapped attribute extent
+ * is not switched.
+ */
+ if (status.runlist_merged && !status.attr_switched) {
+ BUG_ON(!rl_write_locked);
+ /* Make the file cluster we allocated sparse in the runlist. */
+ if (ntfs_rl_punch_nolock(vol, &ni->runlist, bh_cpos, 1)) {
+ ntfs_error(vol->sb, "Failed to punch hole into "
+ "attribute runlist in error code "
+ "path. Run chkdsk to recover the "
+ "lost cluster.");
+ make_bad_inode(vi);
+ make_bad_inode(VFS_I(base_ni));
+ NVolSetErrors(vol);
+ } else /* if (success) */ {
+ status.runlist_merged = 0;
+ /*
+ * Deallocate the on-disk cluster we allocated but only
+ * if we succeeded in punching its vcn out of the
+ * runlist.
+ */
+ down_write(&vol->lcnbmp_lock);
+ if (ntfs_bitmap_clear_bit(vol->lcnbmp_ino, lcn)) {
+ ntfs_error(vol->sb, "Failed to release "
+ "allocated cluster in error "
+ "code path. Run chkdsk to "
+ "recover the lost cluster.");
+ NVolSetErrors(vol);
+ }
+ up_write(&vol->lcnbmp_lock);
+ }
+ }
+ /*
+ * Resize the attribute record to its old size and rebuild the mapping
+ * pairs array. Note, we only can do this if the runlist has been
+ * restored to its old state which also implies that the mapped
+ * attribute extent is not switched.
+ */
+ if (status.mp_rebuilt && !status.runlist_merged) {
+ if (ntfs_attr_record_resize(m, a, attr_rec_len)) {
+ ntfs_error(vol->sb, "Failed to restore attribute "
+ "record in error code path. Run "
+ "chkdsk to recover.");
+ make_bad_inode(vi);
+ make_bad_inode(VFS_I(base_ni));
+ NVolSetErrors(vol);
+ } else /* if (success) */ {
+ if (ntfs_mapping_pairs_build(vol, (u8*)a +
+ le16_to_cpu(a->data.non_resident.
+ mapping_pairs_offset), attr_rec_len -
+ le16_to_cpu(a->data.non_resident.
+ mapping_pairs_offset), ni->runlist.rl,
+ vcn, highest_vcn, NULL)) {
+ ntfs_error(vol->sb, "Failed to restore "
+ "mapping pairs array in error "
+ "code path. Run chkdsk to "
+ "recover.");
+ make_bad_inode(vi);
+ make_bad_inode(VFS_I(base_ni));
+ NVolSetErrors(vol);
+ }
+ flush_dcache_mft_record_page(ctx->ntfs_ino);
+ mark_mft_record_dirty(ctx->ntfs_ino);
+ }
+ }
+ /* Release the mft record and the attribute. */
+ if (status.mft_attr_mapped) {
+ ntfs_attr_put_search_ctx(ctx);
+ unmap_mft_record(base_ni);
+ }
+ /* Release the runlist lock. */
+ if (rl_write_locked)
+ up_write(&ni->runlist.lock);
+ else if (rl)
+ up_read(&ni->runlist.lock);
+ /*
+ * Zero out any newly allocated blocks to avoid exposing stale data.
+ * If BH_New is set, we know that the block was newly allocated above
+ * and that it has not been fully zeroed and marked dirty yet.
+ */
+ nr_pages = u;
+ u = 0;
+ end = bh_cpos << vol->cluster_size_bits;
+ do {
+ page = pages[u];
+ bh = head = page_buffers(page);
+ do {
+ if (u == nr_pages &&
+ ((s64)page->index << PAGE_CACHE_SHIFT) +
+ bh_offset(bh) >= end)
+ break;
+ if (!buffer_new(bh))
+ continue;
+ clear_buffer_new(bh);
+ if (!buffer_uptodate(bh)) {
+ if (PageUptodate(page))
+ set_buffer_uptodate(bh);
+ else {
+ u8 *kaddr = kmap_atomic(page, KM_USER0);
+ memset(kaddr + bh_offset(bh), 0,
+ blocksize);
+ kunmap_atomic(kaddr, KM_USER0);
+ flush_dcache_page(page);
+ set_buffer_uptodate(bh);
+ }
+ }
+ mark_buffer_dirty(bh);
+ } while ((bh = bh->b_this_page) != head);
+ } while (++u <= nr_pages);
+ ntfs_error(vol->sb, "Failed. Returning error code %i.", err);
+ return err;
+}
+
+/*
+ * Copy as much as we can into the pages and return the number of bytes which
+ * were sucessfully copied. If a fault is encountered then clear the pages
+ * out to (ofs + bytes) and return the number of bytes which were copied.
+ */
+static inline size_t ntfs_copy_from_user(struct page **pages,
+ unsigned nr_pages, unsigned ofs, const char __user *buf,
+ size_t bytes)
+{
+ struct page **last_page = pages + nr_pages;
+ char *kaddr;
+ size_t total = 0;
+ unsigned len;
+ int left;
+
+ do {
+ len = PAGE_CACHE_SIZE - ofs;
+ if (len > bytes)
+ len = bytes;
+ kaddr = kmap_atomic(*pages, KM_USER0);
+ left = __copy_from_user_inatomic(kaddr + ofs, buf, len);
+ kunmap_atomic(kaddr, KM_USER0);
+ if (unlikely(left)) {
+ /* Do it the slow way. */
+ kaddr = kmap(*pages);
+ left = __copy_from_user(kaddr + ofs, buf, len);
+ kunmap(*pages);
+ if (unlikely(left))
+ goto err_out;
+ }
+ total += len;
+ bytes -= len;
+ if (!bytes)
+ break;
+ buf += len;
+ ofs = 0;
+ } while (++pages < last_page);
+out:
+ return total;
+err_out:
+ total += len - left;
+ /* Zero the rest of the target like __copy_from_user(). */
+ while (++pages < last_page) {
+ bytes -= len;
+ if (!bytes)
+ break;
+ len = PAGE_CACHE_SIZE;
+ if (len > bytes)
+ len = bytes;
+ kaddr = kmap_atomic(*pages, KM_USER0);
+ memset(kaddr, 0, len);
+ kunmap_atomic(kaddr, KM_USER0);
+ }
+ goto out;
+}
+
+static size_t __ntfs_copy_from_user_iovec(char *vaddr,
+ const struct iovec *iov, size_t iov_ofs, size_t bytes)
+{
+ size_t total = 0;
+
+ while (1) {
+ const char __user *buf = iov->iov_base + iov_ofs;
+ unsigned len;
+ size_t left;
+
+ len = iov->iov_len - iov_ofs;
+ if (len > bytes)
+ len = bytes;
+ left = __copy_from_user_inatomic(vaddr, buf, len);
+ total += len;
+ bytes -= len;
+ vaddr += len;
+ if (unlikely(left)) {
+ /*
+ * Zero the rest of the target like __copy_from_user().
+ */
+ memset(vaddr, 0, bytes);
+ total -= left;
+ break;
+ }
+ if (!bytes)
+ break;
+ iov++;
+ iov_ofs = 0;
+ }
+ return total;
+}
+
+static inline void ntfs_set_next_iovec(const struct iovec **iovp,
+ size_t *iov_ofsp, size_t bytes)
+{
+ const struct iovec *iov = *iovp;
+ size_t iov_ofs = *iov_ofsp;
+
+ while (bytes) {
+ unsigned len;
+
+ len = iov->iov_len - iov_ofs;
+ if (len > bytes)
+ len = bytes;
+ bytes -= len;
+ iov_ofs += len;
+ if (iov->iov_len == iov_ofs) {
+ iov++;
+ iov_ofs = 0;
+ }
+ }
+ *iovp = iov;
+ *iov_ofsp = iov_ofs;
+}
+
+/*
+ * This has the same side-effects and return value as ntfs_copy_from_user().
+ * The difference is that on a fault we need to memset the remainder of the
+ * pages (out to offset + bytes), to emulate ntfs_copy_from_user()'s
+ * single-segment behaviour.
+ *
+ * We call the same helper (__ntfs_copy_from_user_iovec()) both when atomic and
+ * when not atomic. This is ok because __ntfs_copy_from_user_iovec() calls
+ * __copy_from_user_inatomic() and it is ok to call this when non-atomic. In
+ * fact, the only difference between __copy_from_user_inatomic() and
+ * __copy_from_user() is that the latter calls might_sleep(). And on many
+ * architectures __copy_from_user_inatomic() is just defined to
+ * __copy_from_user() so it makes no difference at all on those architectures.
+ */
+static inline size_t ntfs_copy_from_user_iovec(struct page **pages,
+ unsigned nr_pages, unsigned ofs, const struct iovec **iov,
+ size_t *iov_ofs, size_t bytes)
+{
+ struct page **last_page = pages + nr_pages;
+ char *kaddr;
+ size_t copied, len, total = 0;
+
+ do {
+ len = PAGE_CACHE_SIZE - ofs;
+ if (len > bytes)
+ len = bytes;
+ kaddr = kmap_atomic(*pages, KM_USER0);
+ copied = __ntfs_copy_from_user_iovec(kaddr + ofs,
+ *iov, *iov_ofs, len);
+ kunmap_atomic(kaddr, KM_USER0);
+ if (unlikely(copied != len)) {
+ /* Do it the slow way. */
+ kaddr = kmap(*pages);
+ copied = __ntfs_copy_from_user_iovec(kaddr + ofs,
+ *iov, *iov_ofs, len);
+ kunmap(*pages);
+ if (unlikely(copied != len))
+ goto err_out;
+ }
+ total += len;
+ bytes -= len;
+ if (!bytes)
+ break;
+ ntfs_set_next_iovec(iov, iov_ofs, len);
+ ofs = 0;
+ } while (++pages < last_page);
+out:
+ return total;
+err_out:
+ total += copied;
+ /* Zero the rest of the target like __copy_from_user(). */
+ while (++pages < last_page) {
+ bytes -= len;
+ if (!bytes)
+ break;
+ len = PAGE_CACHE_SIZE;
+ if (len > bytes)
+ len = bytes;
+ kaddr = kmap_atomic(*pages, KM_USER0);
+ memset(kaddr, 0, len);
+ kunmap_atomic(kaddr, KM_USER0);
+ }
+ goto out;
+}
+
+static inline void ntfs_flush_dcache_pages(struct page **pages,
+ unsigned nr_pages)
+{
+ BUG_ON(!nr_pages);
+ do {
+ /*
+ * Warning: Do not do the decrement at the same time as the
+ * call because flush_dcache_page() is a NULL macro on i386
+ * and hence the decrement never happens.
+ */
+ flush_dcache_page(pages[nr_pages]);
+ } while (--nr_pages > 0);
+}
+
+/**
+ * ntfs_commit_pages_after_non_resident_write - commit the received data
+ * @pages: array of destination pages
+ * @nr_pages: number of pages in @pages
+ * @pos: byte position in file at which the write begins
+ * @bytes: number of bytes to be written
+ *
+ * See description of ntfs_commit_pages_after_write(), below.
+ */
+static inline int ntfs_commit_pages_after_non_resident_write(
+ struct page **pages, const unsigned nr_pages,
+ s64 pos, size_t bytes)
+{
+ s64 end, initialized_size;
+ struct inode *vi;
+ ntfs_inode *ni, *base_ni;
+ struct buffer_head *bh, *head;
+ ntfs_attr_search_ctx *ctx;
+ MFT_RECORD *m;
+ ATTR_RECORD *a;
+ unsigned long flags;
+ unsigned blocksize, u;
+ int err;
+
+ vi = pages[0]->mapping->host;
+ ni = NTFS_I(vi);
+ blocksize = 1 << vi->i_blkbits;
+ end = pos + bytes;
+ u = 0;
+ do {
+ s64 bh_pos;
+ struct page *page;
+ BOOL partial;
+
+ page = pages[u];
+ bh_pos = (s64)page->index << PAGE_CACHE_SHIFT;
+ bh = head = page_buffers(page);
+ partial = FALSE;
+ do {
+ s64 bh_end;
+
+ bh_end = bh_pos + blocksize;
+ if (bh_end <= pos || bh_pos >= end) {
+ if (!buffer_uptodate(bh))
+ partial = TRUE;
+ } else {
+ set_buffer_uptodate(bh);
+ mark_buffer_dirty(bh);
+ }
+ } while (bh_pos += blocksize, (bh = bh->b_this_page) != head);
+ /*
+ * If all buffers are now uptodate but the page is not, set the
+ * page uptodate.
+ */
+ if (!partial && !PageUptodate(page))
+ SetPageUptodate(page);
+ } while (++u < nr_pages);
+ /*
+ * Finally, if we do not need to update initialized_size or i_size we
+ * are finished.
+ */
+ read_lock_irqsave(&ni->size_lock, flags);
+ initialized_size = ni->initialized_size;
+ read_unlock_irqrestore(&ni->size_lock, flags);
+ if (end <= initialized_size) {
+ ntfs_debug("Done.");
+ return 0;
+ }
+ /*
+ * Update initialized_size/i_size as appropriate, both in the inode and
+ * the mft record.
+ */
+ if (!NInoAttr(ni))
+ base_ni = ni;
+ else
+ base_ni = ni->ext.base_ntfs_ino;
+ /* Map, pin, and lock the mft record. */
+ m = map_mft_record(base_ni);
+ if (IS_ERR(m)) {
+ err = PTR_ERR(m);
+ m = NULL;
+ ctx = NULL;
+ goto err_out;
+ }
+ BUG_ON(!NInoNonResident(ni));
+ ctx = ntfs_attr_get_search_ctx(base_ni, m);
+ if (unlikely(!ctx)) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ err = ntfs_attr_lookup(ni->type, ni->name, ni->name_len,
+ CASE_SENSITIVE, 0, NULL, 0, ctx);
+ if (unlikely(err)) {
+ if (err == -ENOENT)
+ err = -EIO;
+ goto err_out;
+ }
+ a = ctx->attr;
+ BUG_ON(!a->non_resident);
+ write_lock_irqsave(&ni->size_lock, flags);
+ BUG_ON(end > ni->allocated_size);
+ ni->initialized_size = end;
+ a->data.non_resident.initialized_size = cpu_to_sle64(end);
+ if (end > i_size_read(vi)) {
+ i_size_write(vi, end);
+ a->data.non_resident.data_size =
+ a->data.non_resident.initialized_size;
+ }
+ write_unlock_irqrestore(&ni->size_lock, flags);
+ /* Mark the mft record dirty, so it gets written back. */
+ flush_dcache_mft_record_page(ctx->ntfs_ino);
+ mark_mft_record_dirty(ctx->ntfs_ino);
+ ntfs_attr_put_search_ctx(ctx);
+ unmap_mft_record(base_ni);
+ ntfs_debug("Done.");
+ return 0;
+err_out:
+ if (ctx)
+ ntfs_attr_put_search_ctx(ctx);
+ if (m)
+ unmap_mft_record(base_ni);
+ ntfs_error(vi->i_sb, "Failed to update initialized_size/i_size (error "
+ "code %i).", err);
+ if (err != -ENOMEM) {
+ NVolSetErrors(ni->vol);
+ make_bad_inode(VFS_I(base_ni));
+ make_bad_inode(vi);
+ }
+ return err;
+}
+
+/**
+ * ntfs_commit_pages_after_write - commit the received data
+ * @pages: array of destination pages
+ * @nr_pages: number of pages in @pages
+ * @pos: byte position in file at which the write begins
+ * @bytes: number of bytes to be written
+ *
+ * This is called from ntfs_file_buffered_write() with i_sem held on the inode
+ * (@pages[0]->mapping->host). There are @nr_pages pages in @pages which are
+ * locked but not kmap()ped. The source data has already been copied into the
+ * @page. ntfs_prepare_pages_for_non_resident_write() has been called before
+ * the data was copied (for non-resident attributes only) and it returned
+ * success.
+ *
+ * Need to set uptodate and mark dirty all buffers within the boundary of the
+ * write. If all buffers in a page are uptodate we set the page uptodate, too.
+ *
+ * Setting the buffers dirty ensures that they get written out later when
+ * ntfs_writepage() is invoked by the VM.
+ *
+ * Finally, we need to update i_size and initialized_size as appropriate both
+ * in the inode and the mft record.
+ *
+ * This is modelled after fs/buffer.c::generic_commit_write(), which marks
+ * buffers uptodate and dirty, sets the page uptodate if all buffers in the
+ * page are uptodate, and updates i_size if the end of io is beyond i_size. In
+ * that case, it also marks the inode dirty.
+ *
+ * If things have gone as outlined in
+ * ntfs_prepare_pages_for_non_resident_write(), we do not need to do any page
+ * content modifications here for non-resident attributes. For resident
+ * attributes we need to do the uptodate bringing here which we combine with
+ * the copying into the mft record which means we save one atomic kmap.
+ *
+ * Return 0 on success or -errno on error.
+ */
+static int ntfs_commit_pages_after_write(struct page **pages,
+ const unsigned nr_pages, s64 pos, size_t bytes)
+{
+ s64 end, initialized_size;
+ loff_t i_size;
+ struct inode *vi;
+ ntfs_inode *ni, *base_ni;
+ struct page *page;
+ ntfs_attr_search_ctx *ctx;
+ MFT_RECORD *m;
+ ATTR_RECORD *a;
+ char *kattr, *kaddr;
+ unsigned long flags;
+ u32 attr_len;
+ int err;
+
+ BUG_ON(!nr_pages);
+ BUG_ON(!pages);
+ page = pages[0];
+ BUG_ON(!page);
+ vi = page->mapping->host;
+ ni = NTFS_I(vi);
+ ntfs_debug("Entering for inode 0x%lx, attribute type 0x%x, start page "
+ "index 0x%lx, nr_pages 0x%x, pos 0x%llx, bytes 0x%x.",
+ vi->i_ino, ni->type, page->index, nr_pages,
+ (long long)pos, bytes);
+ if (NInoNonResident(ni))
+ return ntfs_commit_pages_after_non_resident_write(pages,
+ nr_pages, pos, bytes);
+ BUG_ON(nr_pages > 1);
+ /*
+ * Attribute is resident, implying it is not compressed, encrypted, or
+ * sparse.
+ */
+ if (!NInoAttr(ni))
+ base_ni = ni;
+ else
+ base_ni = ni->ext.base_ntfs_ino;
+ BUG_ON(NInoNonResident(ni));
+ /* Map, pin, and lock the mft record. */
+ m = map_mft_record(base_ni);
+ if (IS_ERR(m)) {
+ err = PTR_ERR(m);
+ m = NULL;
+ ctx = NULL;
+ goto err_out;
+ }
+ ctx = ntfs_attr_get_search_ctx(base_ni, m);
+ if (unlikely(!ctx)) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ err = ntfs_attr_lookup(ni->type, ni->name, ni->name_len,
+ CASE_SENSITIVE, 0, NULL, 0, ctx);
+ if (unlikely(err)) {
+ if (err == -ENOENT)
+ err = -EIO;
+ goto err_out;
+ }
+ a = ctx->attr;
+ BUG_ON(a->non_resident);
+ /* The total length of the attribute value. */
+ attr_len = le32_to_cpu(a->data.resident.value_length);
+ i_size = i_size_read(vi);
+ BUG_ON(attr_len != i_size);
+ BUG_ON(pos > attr_len);
+ end = pos + bytes;
+ BUG_ON(end > le32_to_cpu(a->length) -
+ le16_to_cpu(a->data.resident.value_offset));
+ kattr = (u8*)a + le16_to_cpu(a->data.resident.value_offset);
+ kaddr = kmap_atomic(page, KM_USER0);
+ /* Copy the received data from the page to the mft record. */
+ memcpy(kattr + pos, kaddr + pos, bytes);
+ /* Update the attribute length if necessary. */
+ if (end > attr_len) {
+ attr_len = end;
+ a->data.resident.value_length = cpu_to_le32(attr_len);
+ }
+ /*
+ * If the page is not uptodate, bring the out of bounds area(s)
+ * uptodate by copying data from the mft record to the page.
+ */
+ if (!PageUptodate(page)) {
+ if (pos > 0)
+ memcpy(kaddr, kattr, pos);
+ if (end < attr_len)
+ memcpy(kaddr + end, kattr + end, attr_len - end);
+ /* Zero the region outside the end of the attribute value. */
+ memset(kaddr + attr_len, 0, PAGE_CACHE_SIZE - attr_len);
+ flush_dcache_page(page);
+ SetPageUptodate(page);
+ }
+ kunmap_atomic(kaddr, KM_USER0);
+ /* Update initialized_size/i_size if necessary. */
+ read_lock_irqsave(&ni->size_lock, flags);
+ initialized_size = ni->initialized_size;
+ BUG_ON(end > ni->allocated_size);
+ read_unlock_irqrestore(&ni->size_lock, flags);
+ BUG_ON(initialized_size != i_size);
+ if (end > initialized_size) {
+ unsigned long flags;
+
+ write_lock_irqsave(&ni->size_lock, flags);
+ ni->initialized_size = end;
+ i_size_write(vi, end);
+ write_unlock_irqrestore(&ni->size_lock, flags);
+ }
+ /* Mark the mft record dirty, so it gets written back. */
+ flush_dcache_mft_record_page(ctx->ntfs_ino);
+ mark_mft_record_dirty(ctx->ntfs_ino);
+ ntfs_attr_put_search_ctx(ctx);
+ unmap_mft_record(base_ni);
+ ntfs_debug("Done.");
+ return 0;
+err_out:
+ if (err == -ENOMEM) {
+ ntfs_warning(vi->i_sb, "Error allocating memory required to "
+ "commit the write.");
+ if (PageUptodate(page)) {
+ ntfs_warning(vi->i_sb, "Page is uptodate, setting "
+ "dirty so the write will be retried "
+ "later on by the VM.");
+ /*
+ * Put the page on mapping->dirty_pages, but leave its
+ * buffers' dirty state as-is.
+ */
+ __set_page_dirty_nobuffers(page);
+ err = 0;
+ } else
+ ntfs_error(vi->i_sb, "Page is not uptodate. Written "
+ "data has been lost.");
+ } else {
+ ntfs_error(vi->i_sb, "Resident attribute commit write failed "
+ "with error %i.", err);
+ NVolSetErrors(ni->vol);
+ make_bad_inode(VFS_I(base_ni));
+ make_bad_inode(vi);
+ }
+ if (ctx)
+ ntfs_attr_put_search_ctx(ctx);
+ if (m)
+ unmap_mft_record(base_ni);
+ return err;
+}
+
+/**
+ * ntfs_file_buffered_write -
+ *
+ * Locking: The vfs is holding ->i_sem on the inode.
+ */
+static ssize_t ntfs_file_buffered_write(struct kiocb *iocb,
+ const struct iovec *iov, unsigned long nr_segs,
+ loff_t pos, loff_t *ppos, size_t count)
+{
+ struct file *file = iocb->ki_filp;
+ struct address_space *mapping = file->f_mapping;
+ struct inode *vi = mapping->host;
+ ntfs_inode *ni = NTFS_I(vi);
+ ntfs_volume *vol = ni->vol;
+ struct page *pages[NTFS_MAX_PAGES_PER_CLUSTER];
+ struct page *cached_page = NULL;
+ char __user *buf = NULL;
+ s64 end, ll;
+ VCN last_vcn;
+ LCN lcn;
+ unsigned long flags;
+ size_t bytes, iov_ofs;
+ ssize_t status, written;
+ unsigned nr_pages;
+ int err;
+ struct pagevec lru_pvec;
+
+ ntfs_debug("Entering for i_ino 0x%lx, attribute type 0x%x, "
+ "pos 0x%llx, count 0x%lx.",
+ vi->i_ino, (unsigned)le32_to_cpu(ni->type),
+ (unsigned long long)pos, (unsigned long)count);
+ if (unlikely(!count))
+ return 0;
+ BUG_ON(NInoMstProtected(ni));
+ /*
+ * If the attribute is not an index root and it is encrypted or
+ * compressed, we cannot write to it yet. Note we need to check for
+ * AT_INDEX_ALLOCATION since this is the type of both directory and
+ * index inodes.
+ */
+ if (ni->type != AT_INDEX_ALLOCATION) {
+ /* If file is encrypted, deny access, just like NT4. */
+ if (NInoEncrypted(ni)) {
+ ntfs_debug("Denying write access to encrypted file.");
+ return -EACCES;
+ }
+ if (NInoCompressed(ni)) {
+ ntfs_error(vi->i_sb, "Writing to compressed files is "
+ "not implemented yet. Sorry.");
+ return -EOPNOTSUPP;
+ }
+ }
+ /*
+ * If a previous ntfs_truncate() failed, repeat it and abort if it
+ * fails again.
+ */
+ if (unlikely(NInoTruncateFailed(ni))) {
+ down_write(&vi->i_alloc_sem);
+ err = ntfs_truncate(vi);
+ up_write(&vi->i_alloc_sem);
+ if (err || NInoTruncateFailed(ni)) {
+ if (!err)
+ err = -EIO;
+ ntfs_error(vol->sb, "Cannot perform write to inode "
+ "0x%lx, attribute type 0x%x, because "
+ "ntfs_truncate() failed (error code "
+ "%i).", vi->i_ino,
+ (unsigned)le32_to_cpu(ni->type), err);
+ return err;
+ }
+ }
+ /* The first byte after the write. */
+ end = pos + count;
+ /*
+ * If the write goes beyond the allocated size, extend the allocation
+ * to cover the whole of the write, rounded up to the nearest cluster.
+ */
+ read_lock_irqsave(&ni->size_lock, flags);
+ ll = ni->allocated_size;
+ read_unlock_irqrestore(&ni->size_lock, flags);
+ if (end > ll) {
+ /* Extend the allocation without changing the data size. */
+ ll = ntfs_attr_extend_allocation(ni, end, -1, pos);
+ if (likely(ll >= 0)) {
+ BUG_ON(pos >= ll);
+ /* If the extension was partial truncate the write. */
+ if (end > ll) {
+ ntfs_debug("Truncating write to inode 0x%lx, "
+ "attribute type 0x%x, because "
+ "the allocation was only "
+ "partially extended.",
+ vi->i_ino, (unsigned)
+ le32_to_cpu(ni->type));
+ end = ll;
+ count = ll - pos;
+ }
+ } else {
+ err = ll;
+ read_lock_irqsave(&ni->size_lock, flags);
+ ll = ni->allocated_size;
+ read_unlock_irqrestore(&ni->size_lock, flags);
+ /* Perform a partial write if possible or fail. */
+ if (pos < ll) {
+ ntfs_debug("Truncating write to inode 0x%lx, "
+ "attribute type 0x%x, because "
+ "extending the allocation "
+ "failed (error code %i).",
+ vi->i_ino, (unsigned)
+ le32_to_cpu(ni->type), err);
+ end = ll;
+ count = ll - pos;
+ } else {
+ ntfs_error(vol->sb, "Cannot perform write to "
+ "inode 0x%lx, attribute type "
+ "0x%x, because extending the "
+ "allocation failed (error "
+ "code %i).", vi->i_ino,
+ (unsigned)
+ le32_to_cpu(ni->type), err);
+ return err;
+ }
+ }
+ }
+ pagevec_init(&lru_pvec, 0);
+ written = 0;
+ /*
+ * If the write starts beyond the initialized size, extend it up to the
+ * beginning of the write and initialize all non-sparse space between
+ * the old initialized size and the new one. This automatically also
+ * increments the vfs inode->i_size to keep it above or equal to the
+ * initialized_size.
+ */
+ read_lock_irqsave(&ni->size_lock, flags);
+ ll = ni->initialized_size;
+ read_unlock_irqrestore(&ni->size_lock, flags);
+ if (pos > ll) {
+ err = ntfs_attr_extend_initialized(ni, pos, &cached_page,
+ &lru_pvec);
+ if (err < 0) {
+ ntfs_error(vol->sb, "Cannot perform write to inode "
+ "0x%lx, attribute type 0x%x, because "
+ "extending the initialized size "
+ "failed (error code %i).", vi->i_ino,
+ (unsigned)le32_to_cpu(ni->type), err);
+ status = err;
+ goto err_out;
+ }
+ }
+ /*
+ * Determine the number of pages per cluster for non-resident
+ * attributes.
+ */
+ nr_pages = 1;
+ if (vol->cluster_size > PAGE_CACHE_SIZE && NInoNonResident(ni))
+ nr_pages = vol->cluster_size >> PAGE_CACHE_SHIFT;
+ /* Finally, perform the actual write. */
+ last_vcn = -1;
+ if (likely(nr_segs == 1))
+ buf = iov->iov_base;
+ else
+ iov_ofs = 0; /* Offset in the current iovec. */
+ do {
+ VCN vcn;
+ pgoff_t idx, start_idx;
+ unsigned ofs, do_pages, u;
+ size_t copied;
+
+ start_idx = idx = pos >> PAGE_CACHE_SHIFT;
+ ofs = pos & ~PAGE_CACHE_MASK;
+ bytes = PAGE_CACHE_SIZE - ofs;
+ do_pages = 1;
+ if (nr_pages > 1) {
+ vcn = pos >> vol->cluster_size_bits;
+ if (vcn != last_vcn) {
+ last_vcn = vcn;
+ /*
+ * Get the lcn of the vcn the write is in. If
+ * it is a hole, need to lock down all pages in
+ * the cluster.
+ */
+ down_read(&ni->runlist.lock);
+ lcn = ntfs_attr_vcn_to_lcn_nolock(ni, pos >>
+ vol->cluster_size_bits, FALSE);
+ up_read(&ni->runlist.lock);
+ if (unlikely(lcn < LCN_HOLE)) {
+ status = -EIO;
+ if (lcn == LCN_ENOMEM)
+ status = -ENOMEM;
+ else
+ ntfs_error(vol->sb, "Cannot "
+ "perform write to "
+ "inode 0x%lx, "
+ "attribute type 0x%x, "
+ "because the attribute "
+ "is corrupt.",
+ vi->i_ino, (unsigned)
+ le32_to_cpu(ni->type));
+ break;
+ }
+ if (lcn == LCN_HOLE) {
+ start_idx = (pos & ~(s64)
+ vol->cluster_size_mask)
+ >> PAGE_CACHE_SHIFT;
+ bytes = vol->cluster_size - (pos &
+ vol->cluster_size_mask);
+ do_pages = nr_pages;
+ }
+ }
+ }
+ if (bytes > count)
+ bytes = count;
+ /*
+ * Bring in the user page(s) that we will copy from _first_.
+ * Otherwise there is a nasty deadlock on copying from the same
+ * page(s) as we are writing to, without it/them being marked
+ * up-to-date. Note, at present there is nothing to stop the
+ * pages being swapped out between us bringing them into memory
+ * and doing the actual copying.
+ */
+ if (likely(nr_segs == 1))
+ ntfs_fault_in_pages_readable(buf, bytes);
+ else
+ ntfs_fault_in_pages_readable_iovec(iov, iov_ofs, bytes);
+ /* Get and lock @do_pages starting at index @start_idx. */
+ status = __ntfs_grab_cache_pages(mapping, start_idx, do_pages,
+ pages, &cached_page, &lru_pvec);
+ if (unlikely(status))
+ break;
+ /*
+ * For non-resident attributes, we need to fill any holes with
+ * actual clusters and ensure all bufferes are mapped. We also
+ * need to bring uptodate any buffers that are only partially
+ * being written to.
+ */
+ if (NInoNonResident(ni)) {
+ status = ntfs_prepare_pages_for_non_resident_write(
+ pages, do_pages, pos, bytes);
+ if (unlikely(status)) {
+ loff_t i_size;
+
+ do {
+ unlock_page(pages[--do_pages]);
+ page_cache_release(pages[do_pages]);
+ } while (do_pages);
+ /*
+ * The write preparation may have instantiated
+ * allocated space outside i_size. Trim this
+ * off again. We can ignore any errors in this
+ * case as we will just be waisting a bit of
+ * allocated space, which is not a disaster.
+ */
+ i_size = i_size_read(vi);
+ if (pos + bytes > i_size)
+ vmtruncate(vi, i_size);
+ break;
+ }
+ }
+ u = (pos >> PAGE_CACHE_SHIFT) - pages[0]->index;
+ if (likely(nr_segs == 1)) {
+ copied = ntfs_copy_from_user(pages + u, do_pages - u,
+ ofs, buf, bytes);
+ buf += copied;
+ } else
+ copied = ntfs_copy_from_user_iovec(pages + u,
+ do_pages - u, ofs, &iov, &iov_ofs,
+ bytes);
+ ntfs_flush_dcache_pages(pages + u, do_pages - u);
+ status = ntfs_commit_pages_after_write(pages, do_pages, pos,
+ bytes);
+ if (likely(!status)) {
+ written += copied;
+ count -= copied;
+ pos += copied;
+ if (unlikely(copied != bytes))
+ status = -EFAULT;
+ }
+ do {
+ unlock_page(pages[--do_pages]);
+ mark_page_accessed(pages[do_pages]);
+ page_cache_release(pages[do_pages]);
+ } while (do_pages);
+ if (unlikely(status))
+ break;
+ balance_dirty_pages_ratelimited(mapping);
+ cond_resched();
+ } while (count);
+err_out:
+ *ppos = pos;
+ if (cached_page)
+ page_cache_release(cached_page);
+ /* For now, when the user asks for O_SYNC, we actually give O_DSYNC. */
+ if (likely(!status)) {
+ if (unlikely((file->f_flags & O_SYNC) || IS_SYNC(vi))) {
+ if (!mapping->a_ops->writepage || !is_sync_kiocb(iocb))
+ status = generic_osync_inode(vi, mapping,
+ OSYNC_METADATA|OSYNC_DATA);
+ }
+ }
+ pagevec_lru_add(&lru_pvec);
+ ntfs_debug("Done. Returning %s (written 0x%lx, status %li).",
+ written ? "written" : "status", (unsigned long)written,
+ (long)status);
+ return written ? written : status;
+}
+
+/**
+ * ntfs_file_aio_write_nolock -
+ */
+static ssize_t ntfs_file_aio_write_nolock(struct kiocb *iocb,
+ const struct iovec *iov, unsigned long nr_segs, loff_t *ppos)
+{
+ struct file *file = iocb->ki_filp;
+ struct address_space *mapping = file->f_mapping;
+ struct inode *inode = mapping->host;
+ loff_t pos;
+ unsigned long seg;
+ size_t count; /* after file limit checks */
+ ssize_t written, err;
+
+ count = 0;
+ for (seg = 0; seg < nr_segs; seg++) {
+ const struct iovec *iv = &iov[seg];
+ /*
+ * If any segment has a negative length, or the cumulative
+ * length ever wraps negative then return -EINVAL.
+ */
+ count += iv->iov_len;
+ if (unlikely((ssize_t)(count|iv->iov_len) < 0))
+ return -EINVAL;
+ if (access_ok(VERIFY_READ, iv->iov_base, iv->iov_len))
+ continue;
+ if (!seg)
+ return -EFAULT;
+ nr_segs = seg;
+ count -= iv->iov_len; /* This segment is no good */
+ break;
+ }
+ pos = *ppos;
+ vfs_check_frozen(inode->i_sb, SB_FREEZE_WRITE);
+ /* We can write back this queue in page reclaim. */
+ current->backing_dev_info = mapping->backing_dev_info;
+ written = 0;
+ err = generic_write_checks(file, &pos, &count, S_ISBLK(inode->i_mode));
+ if (err)
+ goto out;
+ if (!count)
+ goto out;
+ err = remove_suid(file->f_dentry);
+ if (err)
+ goto out;
+ inode_update_time(inode, 1);
+ written = ntfs_file_buffered_write(iocb, iov, nr_segs, pos, ppos,
+ count);
+out:
+ current->backing_dev_info = NULL;
+ return written ? written : err;
+}
+
+/**
+ * ntfs_file_aio_write -
+ */
+static ssize_t ntfs_file_aio_write(struct kiocb *iocb, const char __user *buf,
+ size_t count, loff_t pos)
+{
+ struct file *file = iocb->ki_filp;
+ struct address_space *mapping = file->f_mapping;
+ struct inode *inode = mapping->host;
+ ssize_t ret;
+ struct iovec local_iov = { .iov_base = (void __user *)buf,
+ .iov_len = count };
+
+ BUG_ON(iocb->ki_pos != pos);
+
+ down(&inode->i_sem);
+ ret = ntfs_file_aio_write_nolock(iocb, &local_iov, 1, &iocb->ki_pos);
+ up(&inode->i_sem);
+ if (ret > 0 && ((file->f_flags & O_SYNC) || IS_SYNC(inode))) {
+ int err = sync_page_range(inode, mapping, pos, ret);
+ if (err < 0)
+ ret = err;
+ }
+ return ret;
+}
+
+/**
+ * ntfs_file_writev -
+ *
+ * Basically the same as generic_file_writev() except that it ends up calling
+ * ntfs_file_aio_write_nolock() instead of __generic_file_aio_write_nolock().
+ */
+static ssize_t ntfs_file_writev(struct file *file, const struct iovec *iov,
+ unsigned long nr_segs, loff_t *ppos)
+{
+ struct address_space *mapping = file->f_mapping;
+ struct inode *inode = mapping->host;
+ struct kiocb kiocb;
+ ssize_t ret;
+
+ down(&inode->i_sem);
+ init_sync_kiocb(&kiocb, file);
+ ret = ntfs_file_aio_write_nolock(&kiocb, iov, nr_segs, ppos);
+ if (ret == -EIOCBQUEUED)
+ ret = wait_on_sync_kiocb(&kiocb);
+ up(&inode->i_sem);
+ if (ret > 0 && ((file->f_flags & O_SYNC) || IS_SYNC(inode))) {
+ int err = sync_page_range(inode, mapping, *ppos - ret, ret);
+ if (err < 0)
+ ret = err;
+ }
+ return ret;
+}
+
+/**
+ * ntfs_file_write - simple wrapper for ntfs_file_writev()
+ */
+static ssize_t ntfs_file_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct iovec local_iov = { .iov_base = (void __user *)buf,
+ .iov_len = count };
+
+ return ntfs_file_writev(file, &local_iov, 1, ppos);
+}
+
+/**
* ntfs_file_fsync - sync a file to disk
* @filp: file to be synced
* @dentry: dentry describing the file to sync
@@ -113,39 +2296,39 @@ static int ntfs_file_fsync(struct file *filp, struct dentry *dentry,
#endif /* NTFS_RW */
struct file_operations ntfs_file_ops = {
- .llseek = generic_file_llseek, /* Seek inside file. */
- .read = generic_file_read, /* Read from file. */
- .aio_read = generic_file_aio_read, /* Async read from file. */
- .readv = generic_file_readv, /* Read from file. */
+ .llseek = generic_file_llseek, /* Seek inside file. */
+ .read = generic_file_read, /* Read from file. */
+ .aio_read = generic_file_aio_read, /* Async read from file. */
+ .readv = generic_file_readv, /* Read from file. */
#ifdef NTFS_RW
- .write = generic_file_write, /* Write to file. */
- .aio_write = generic_file_aio_write, /* Async write to file. */
- .writev = generic_file_writev, /* Write to file. */
- /*.release = ,*/ /* Last file is closed. See
- fs/ext2/file.c::
- ext2_release_file() for
- how to use this to discard
- preallocated space for
- write opened files. */
- .fsync = ntfs_file_fsync, /* Sync a file to disk. */
- /*.aio_fsync = ,*/ /* Sync all outstanding async
- i/o operations on a
- kiocb. */
+ .write = ntfs_file_write, /* Write to file. */
+ .aio_write = ntfs_file_aio_write, /* Async write to file. */
+ .writev = ntfs_file_writev, /* Write to file. */
+ /*.release = ,*/ /* Last file is closed. See
+ fs/ext2/file.c::
+ ext2_release_file() for
+ how to use this to discard
+ preallocated space for
+ write opened files. */
+ .fsync = ntfs_file_fsync, /* Sync a file to disk. */
+ /*.aio_fsync = ,*/ /* Sync all outstanding async
+ i/o operations on a
+ kiocb. */
#endif /* NTFS_RW */
- /*.ioctl = ,*/ /* Perform function on the
- mounted filesystem. */
- .mmap = generic_file_mmap, /* Mmap file. */
- .open = ntfs_file_open, /* Open file. */
- .sendfile = generic_file_sendfile, /* Zero-copy data send with
- the data source being on
- the ntfs partition. We
- do not need to care about
- the data destination. */
- /*.sendpage = ,*/ /* Zero-copy data send with
- the data destination being
- on the ntfs partition. We
- do not need to care about
- the data source. */
+ /*.ioctl = ,*/ /* Perform function on the
+ mounted filesystem. */
+ .mmap = generic_file_mmap, /* Mmap file. */
+ .open = ntfs_file_open, /* Open file. */
+ .sendfile = generic_file_sendfile, /* Zero-copy data send with
+ the data source being on
+ the ntfs partition. We do
+ not need to care about the
+ data destination. */
+ /*.sendpage = ,*/ /* Zero-copy data send with
+ the data destination being
+ on the ntfs partition. We
+ do not need to care about
+ the data source. */
};
struct inode_operations ntfs_file_inode_ops = {