diff options
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_82598.c | 85 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_82599.c | 134 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_main.c | 2 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_phy.c | 8 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_type.h | 10 |
5 files changed, 169 insertions, 70 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index 361c9d1d..a7ae4d4 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -1089,35 +1089,56 @@ out: static u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw) { u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 pma_pmd_10g = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK; + u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; + u16 ext_ability = 0; + + hw->phy.ops.identify(hw); + + /* Copper PHY must be checked before AUTOC LMS to determine correct + * physical layer because 10GBase-T PHYs use LMS = KX4/KX */ + if (hw->phy.type == ixgbe_phy_tn || + hw->phy.type == ixgbe_phy_cu_unknown) { + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability); + if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; + if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; + if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; + goto out; + } - switch (hw->device_id) { - case IXGBE_DEV_ID_82598: - /* Default device ID is mezzanine card KX/KX4 */ - physical_layer = (IXGBE_PHYSICAL_LAYER_10GBASE_KX4 | - IXGBE_PHYSICAL_LAYER_1000BASE_KX); - break; - case IXGBE_DEV_ID_82598_BX: - physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX; - case IXGBE_DEV_ID_82598EB_CX4: - case IXGBE_DEV_ID_82598_CX4_DUAL_PORT: - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; - break; - case IXGBE_DEV_ID_82598_DA_DUAL_PORT: - physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; + switch (autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_AN: + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + if (pma_pmd_1g == IXGBE_AUTOC_1G_KX) + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX; + else + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX; break; - case IXGBE_DEV_ID_82598AF_DUAL_PORT: - case IXGBE_DEV_ID_82598AF_SINGLE_PORT: - case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + if (pma_pmd_10g == IXGBE_AUTOC_10G_CX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; + else if (pma_pmd_10g == IXGBE_AUTOC_10G_KX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + else /* XAUI */ + physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; break; - case IXGBE_DEV_ID_82598EB_XF_LR: - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; + case IXGBE_AUTOC_LMS_KX4_AN: + case IXGBE_AUTOC_LMS_KX4_AN_1G_AN: + if (autoc & IXGBE_AUTOC_KX_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4; break; - case IXGBE_DEV_ID_82598AT: - physical_layer = (IXGBE_PHYSICAL_LAYER_10GBASE_T | - IXGBE_PHYSICAL_LAYER_1000BASE_T); + default: break; - case IXGBE_DEV_ID_82598EB_SFP_LOM: + } + + if (hw->phy.type == ixgbe_phy_nl) { hw->phy.ops.identify_sfp(hw); switch (hw->phy.sfp_type) { @@ -1134,13 +1155,25 @@ static u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw) physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; break; } - break; + } + switch (hw->device_id) { + case IXGBE_DEV_ID_82598_DA_DUAL_PORT: + physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; + break; + case IXGBE_DEV_ID_82598AF_DUAL_PORT: + case IXGBE_DEV_ID_82598AF_SINGLE_PORT: + case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; + break; + case IXGBE_DEV_ID_82598EB_XF_LR: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; + break; default: - physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; break; } +out: return physical_layer; } diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index 50b399c..b3f4e96 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -1177,53 +1177,98 @@ s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw) u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw) { u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; + u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK; + u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; + u16 ext_ability = 0; u8 comp_codes_10g = 0; - switch (hw->device_id) { - case IXGBE_DEV_ID_82599: - case IXGBE_DEV_ID_82599_KX4: - /* Default device ID is mezzanine card KX/KX4 */ - physical_layer = (IXGBE_PHYSICAL_LAYER_10GBASE_KX4 | - IXGBE_PHYSICAL_LAYER_1000BASE_KX); + hw->phy.ops.identify(hw); + + if (hw->phy.type == ixgbe_phy_tn || + hw->phy.type == ixgbe_phy_cu_unknown) { + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability); + if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; + if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; + if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; + goto out; + } + + switch (autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_AN: + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + if (pma_pmd_1g == IXGBE_AUTOC_1G_KX_BX) { + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX | + IXGBE_PHYSICAL_LAYER_1000BASE_BX; + goto out; + } else + /* SFI mode so read SFP module */ + goto sfp_check; break; - case IXGBE_DEV_ID_82599_SFP: - hw->phy.ops.identify_sfp(hw); + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_CX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; + else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_KX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + goto out; + break; + case IXGBE_AUTOC_LMS_10G_SERIAL: + if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) { + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR; + goto out; + } else if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) + goto sfp_check; + break; + case IXGBE_AUTOC_LMS_KX4_KX_KR: + case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: + if (autoc & IXGBE_AUTOC_KX_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + if (autoc & IXGBE_AUTOC_KR_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR; + goto out; + break; + default: + goto out; + break; + } - switch (hw->phy.sfp_type) { - case ixgbe_sfp_type_da_cu: - case ixgbe_sfp_type_da_cu_core0: - case ixgbe_sfp_type_da_cu_core1: - physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; - break; - case ixgbe_sfp_type_sr: +sfp_check: + /* SFP check must be done last since DA modules are sometimes used to + * test KR mode - we need to id KR mode correctly before SFP module. + * Call identify_sfp because the pluggable module may have changed */ + hw->phy.ops.identify_sfp(hw); + if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) + goto out; + + switch (hw->phy.type) { + case ixgbe_phy_tw_tyco: + case ixgbe_phy_tw_unknown: + physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; + break; + case ixgbe_phy_sfp_avago: + case ixgbe_phy_sfp_ftl: + case ixgbe_phy_sfp_intel: + case ixgbe_phy_sfp_unknown: + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g); + if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; - break; - case ixgbe_sfp_type_lr: + else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; - break; - case ixgbe_sfp_type_srlr_core0: - case ixgbe_sfp_type_srlr_core1: - hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_10GBE_COMP_CODES, - &comp_codes_10g); - if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) - physical_layer = - IXGBE_PHYSICAL_LAYER_10GBASE_SR; - else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) - physical_layer = - IXGBE_PHYSICAL_LAYER_10GBASE_LR; - else - physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; - default: - physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; - break; - } break; default: - physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; break; } +out: return physical_layer; } @@ -1271,6 +1316,22 @@ s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval) return 0; } +/** + * ixgbe_get_device_caps_82599 - Get additional device capabilities + * @hw: pointer to hardware structure + * @device_caps: the EEPROM word with the extra device capabilities + * + * This function will read the EEPROM location for the device capabilities, + * and return the word through device_caps. + **/ +s32 ixgbe_get_device_caps_82599(struct ixgbe_hw *hw, u16 *device_caps) +{ + hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps); + + return 0; +} + + static struct ixgbe_mac_operations mac_ops_82599 = { .init_hw = &ixgbe_init_hw_generic, .reset_hw = &ixgbe_reset_hw_82599, @@ -1280,6 +1341,7 @@ static struct ixgbe_mac_operations mac_ops_82599 = { .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82599, .enable_rx_dma = &ixgbe_enable_rx_dma_82599, .get_mac_addr = &ixgbe_get_mac_addr_generic, + .get_device_caps = &ixgbe_get_device_caps_82599, .stop_adapter = &ixgbe_stop_adapter_generic, .get_bus_info = &ixgbe_get_bus_info_generic, .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 936a3ef..2856486 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -47,7 +47,7 @@ char ixgbe_driver_name[] = "ixgbe"; static const char ixgbe_driver_string[] = "Intel(R) 10 Gigabit PCI Express Network Driver"; -#define DRV_VERSION "2.0.8-k2" +#define DRV_VERSION "2.0.16-k2" const char ixgbe_driver_version[] = DRV_VERSION; static char ixgbe_copyright[] = "Copyright (c) 1999-2009 Intel Corporation."; diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c index 6f11df7..f3258ec 100644 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -632,7 +632,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) hw->phy.multispeed_fiber = true; /* Determine PHY vendor */ - if (hw->phy.type == ixgbe_phy_unknown) { + if (hw->phy.type != ixgbe_phy_nl) { hw->phy.id = identifier; hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_VENDOR_OUI_BYTE0, @@ -682,9 +682,9 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) goto out; } - hw->eeprom.ops.read(hw, IXGBE_PHY_ENFORCE_INTEL_SFP_OFFSET, - &enforce_sfp); - if (!(enforce_sfp & IXGBE_PHY_ALLOW_ANY_SFP)) { + /* This is guaranteed to be 82599, no need to check for NULL */ + hw->mac.ops.get_device_caps(hw, &enforce_sfp); + if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP)) { /* Make sure we're a supported PHY type */ if (hw->phy.type == ixgbe_phy_sfp_intel) { status = 0; diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index db65c05..a3317d8 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -862,6 +862,7 @@ #define IXGBE_MDIO_PHY_EXT_ABILITY 0xB /* Ext Ability Reg */ #define IXGBE_MDIO_PHY_10GBASET_ABILITY 0x0004 /* 10GBaseT capable */ #define IXGBE_MDIO_PHY_1000BASET_ABILITY 0x0020 /* 1000BaseT capable */ +#define IXGBE_MDIO_PHY_100BASETX_ABILITY 0x0080 /* 100BaseTX capable */ #define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR 0xC30A /* PHY_XS SDA/SCL Addr Reg */ #define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA 0xC30B /* PHY_XS SDA/SCL Data Reg */ @@ -898,8 +899,6 @@ #define IXGBE_CONTROL_NL 0x000F #define IXGBE_CONTROL_EOL_NL 0x0FFF #define IXGBE_CONTROL_SOL_NL 0x0000 -#define IXGBE_PHY_ENFORCE_INTEL_SFP_OFFSET 0x002C -#define IXGBE_PHY_ALLOW_ANY_SFP 0x1 /* General purpose Interrupt Enable */ #define IXGBE_SDP0_GPIEN 0x00000001 /* SDP0 */ @@ -1385,6 +1384,7 @@ #define IXGBE_FW_PTR 0x0F #define IXGBE_PBANUM0_PTR 0x15 #define IXGBE_PBANUM1_PTR 0x16 +#define IXGBE_DEVICE_CAPS 0x2C #define IXGBE_PCIE_MSIX_82599_CAPS 0x72 #define IXGBE_PCIE_MSIX_82598_CAPS 0x62 @@ -1428,6 +1428,8 @@ #define IXGBE_EERD_ATTEMPTS 100000 #endif +#define IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP 0x1 + /* PCI Bus Info */ #define IXGBE_PCI_LINK_STATUS 0xB2 #define IXGBE_PCI_LINK_WIDTH 0x3F0 @@ -1865,7 +1867,7 @@ typedef u32 ixgbe_physical_layer; #define IXGBE_PHYSICAL_LAYER_UNKNOWN 0 #define IXGBE_PHYSICAL_LAYER_10GBASE_T 0x0001 #define IXGBE_PHYSICAL_LAYER_1000BASE_T 0x0002 -#define IXGBE_PHYSICAL_LAYER_100BASE_T 0x0004 +#define IXGBE_PHYSICAL_LAYER_100BASE_TX 0x0004 #define IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU 0x0008 #define IXGBE_PHYSICAL_LAYER_10GBASE_LR 0x0010 #define IXGBE_PHYSICAL_LAYER_10GBASE_LRM 0x0020 @@ -1874,6 +1876,7 @@ typedef u32 ixgbe_physical_layer; #define IXGBE_PHYSICAL_LAYER_10GBASE_CX4 0x0100 #define IXGBE_PHYSICAL_LAYER_1000BASE_KX 0x0200 #define IXGBE_PHYSICAL_LAYER_1000BASE_BX 0x0400 +#define IXGBE_PHYSICAL_LAYER_10GBASE_KR 0x0800 enum ixgbe_eeprom_type { ixgbe_eeprom_uninitialized = 0, @@ -2105,6 +2108,7 @@ struct ixgbe_mac_operations { enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *); u32 (*get_supported_physical_layer)(struct ixgbe_hw *); s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *); + s32 (*get_device_caps)(struct ixgbe_hw *, u16 *); s32 (*stop_adapter)(struct ixgbe_hw *); s32 (*get_bus_info)(struct ixgbe_hw *); void (*set_lan_id)(struct ixgbe_hw *); |