diff options
177 files changed, 7002 insertions, 4436 deletions
diff --git a/Documentation/x86_64/mm.txt b/Documentation/x86_64/mm.txt index b89b6d2..efce750 100644 --- a/Documentation/x86_64/mm.txt +++ b/Documentation/x86_64/mm.txt @@ -11,9 +11,8 @@ ffffc10000000000 - ffffc1ffffffffff (=40 bits) hole ffffc20000000000 - ffffe1ffffffffff (=45 bits) vmalloc/ioremap space ffffe20000000000 - ffffe2ffffffffff (=40 bits) virtual memory map (1TB) ... unused hole ... -ffffffff80000000 - ffffffff82800000 (=40 MB) kernel text mapping, from phys 0 -... unused hole ... -ffffffff88000000 - fffffffffff00000 (=1919 MB) module mapping space +ffffffff80000000 - ffffffffa0000000 (=512 MB) kernel text mapping, from phys 0 +ffffffffa0000000 - fffffffffff00000 (=1536 MB) module mapping space The direct mapping covers all memory in the system up to the highest memory address (this means in some cases it can also include PCI memory diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index bf07b6f..5d28581 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -251,7 +251,7 @@ config X86_ELAN config X86_VOYAGER bool "Voyager (NCR)" - depends on X86_32 && (SMP || BROKEN) + depends on X86_32 && (SMP || BROKEN) && !PCI help Voyager is an MCA-based 32-way capable SMP architecture proprietary to NCR Corp. Machine classes 345x/35xx/4100/51xx are Voyager-based. @@ -263,7 +263,7 @@ config X86_VOYAGER config X86_NUMAQ bool "NUMAQ (IBM/Sequent)" - depends on SMP && X86_32 + depends on SMP && X86_32 && PCI select NUMA help This option is used for getting Linux to run on a (IBM/Sequent) NUMA @@ -293,7 +293,7 @@ config X86_BIGSMP config X86_VISWS bool "SGI 320/540 (Visual Workstation)" - depends on X86_32 + depends on X86_32 && !PCI help The SGI Visual Workstation series is an IA32-based workstation based on SGI systems chips with some legacy PC hardware attached. @@ -337,7 +337,7 @@ config X86_RDC321X config X86_VSMP bool "Support for ScaleMP vSMP" select PARAVIRT - depends on X86_64 + depends on X86_64 && !PCI help Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is supposed to run on these EM64T-based machines. Only choose this option @@ -417,35 +417,19 @@ config PARAVIRT_CLOCK endif -config MEMTEST_BOOTPARAM - bool "Memtest boot parameter" +config MEMTEST + bool "Memtest" depends on X86_64 default y help This option adds a kernel parameter 'memtest', which allows memtest - to be disabled at boot. If this option is selected, memtest - functionality can be disabled with memtest=0 on the kernel - command line. The purpose of this option is to allow a single - kernel image to be distributed with memtest built in, but not - necessarily enabled. - + to be set. + memtest=0, mean disabled; -- default + memtest=1, mean do 1 test pattern; + ... + memtest=4, mean do 4 test patterns. If you are unsure how to answer this question, answer Y. -config MEMTEST_BOOTPARAM_VALUE - int "Memtest boot parameter default value (0-4)" - depends on MEMTEST_BOOTPARAM - range 0 4 - default 0 - help - This option sets the default value for the kernel parameter - 'memtest', which allows memtest to be disabled at boot. If this - option is set to 0 (zero), the memtest kernel parameter will - default to 0, disabling memtest at bootup. If this option is - set to 4, the memtest kernel parameter will default to 4, - enabling memtest at bootup, and use that as pattern number. - - If you are unsure how to answer this question, answer 0. - config ACPI_SRAT def_bool y depends on X86_32 && ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH) @@ -563,18 +547,18 @@ config IOMMU_HELPER def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB) config NR_CPUS - int "Maximum number of CPUs (2-255)" - range 2 255 + int "Maximum number of CPUs (2-4096)" + range 2 4096 depends on SMP default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000 default "8" help This allows you to specify the maximum number of CPUs which this - kernel will support. The maximum supported value is 255 and the + kernel will support. The maximum supported value is 4096 and the minimum value which makes sense is 2. This is purely to save memory - each supported CPU adds - approximately eight kilobytes to the kernel image. + approximately one kilobyte to the kernel image. config SCHED_SMT bool "SMT (Hyperthreading) scheduler support" @@ -1475,8 +1459,7 @@ endmenu menu "Bus options (PCI etc.)" config PCI - bool "PCI support" if !X86_VISWS && !X86_VSMP - depends on !X86_VOYAGER + bool "PCI support" default y select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC) help diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index 2ad6301..3d22bb8 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -399,6 +399,10 @@ config X86_TSC def_bool y depends on ((MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64 +config X86_CMPXCHG64 + def_bool y + depends on X86_PAE || X86_64 + # this should be set for all -march=.. options where the compiler # generates cmov. config X86_CMOV diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 3cff3c8..5df0d1e 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -210,12 +210,12 @@ all: bzImage # KBUILD_IMAGE specify target image being built KBUILD_IMAGE := $(boot)/bzImage -zImage zlilo zdisk: KBUILD_IMAGE := arch/x86/boot/zImage +zImage zlilo zdisk: KBUILD_IMAGE := $(boot)/zImage zImage bzImage: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE) $(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot - $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/bzImage + $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/$@ compressed: zImage diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index d8819ef..1d5dff4 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -30,6 +30,7 @@ #include <asm/page.h> #include <asm/boot.h> #include <asm/msr.h> +#include <asm/processor-flags.h> #include <asm/asm-offsets.h> .section ".text.head" @@ -109,7 +110,7 @@ startup_32: /* Enable PAE mode */ xorl %eax, %eax - orl $(1 << 5), %eax + orl $(X86_CR4_PAE), %eax movl %eax, %cr4 /* @@ -170,7 +171,7 @@ startup_32: pushl %eax /* Enter paged protected Mode, activating Long Mode */ - movl $0x80000001, %eax /* Enable Paging and Protected mode */ + movl $(X86_CR0_PG | X86_CR0_PE), %eax /* Enable Paging and Protected mode */ movl %eax, %cr0 /* Jump from 32bit compatibility mode into 64bit mode. */ diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c index 40ecb8d..b939cb4 100644 --- a/arch/x86/boot/video-vga.c +++ b/arch/x86/boot/video-vga.c @@ -259,8 +259,7 @@ static int vga_probe(void) return mode_count[adapter]; } -__videocard video_vga = -{ +__videocard video_vga = { .card_name = "VGA", .probe = vga_probe, .set_mode = vga_set_mode, diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index ad7ddaa..9bc34e2 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -1,54 +1,103 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-git14 -# Fri Jul 20 09:53:15 2007 +# Linux kernel version: 2.6.26-rc1 +# Sun May 4 19:59:02 2008 # +# CONFIG_64BIT is not set CONFIG_X86_32=y +# CONFIG_X86_64 is not set +CONFIG_X86=y +CONFIG_DEFCONFIG_LIST="arch/x86/configs/i386_defconfig" +# CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y -CONFIG_SEMAPHORE_SLEEPERS=y -CONFIG_X86=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y -CONFIG_QUICKLIST=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y +# CONFIG_GENERIC_GPIO is not set CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_DMI=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +# CONFIG_RWSEM_GENERIC_SPINLOCK is not set +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME_VSYSCALL is not set +CONFIG_ARCH_HAS_CPU_RELAX=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_ZONE_DMA32 is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +# CONFIG_AUDIT_ARCH is not set +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_X86_SMP=y +CONFIG_X86_32_SMP=y +CONFIG_X86_HT=y +CONFIG_X86_BIOS_REBOOT=y +CONFIG_X86_TRAMPOLINE=y +CONFIG_KTIME_SCALAR=y # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=18 -# CONFIG_CPUSETS is not set -CONFIG_SYSFS_DEPRECATED=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_TREE=y +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_CGROUP_NS=y +# CONFIG_CGROUP_DEVICE is not set +CONFIG_CPUSETS=y +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +# CONFIG_USER_SCHED is not set +CONFIG_CGROUP_SCHED=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +# CONFIG_CGROUP_MEM_RES_CTLR is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_PROC_PID_CPUSET=y CONFIG_RELAY=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -56,13 +105,15 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -76,6 +127,17 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_MARKERS=y +# CONFIG_OPROFILE is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -87,10 +149,10 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_KMOD is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LBD is not set +CONFIG_BLK_DEV_IO_TRACE=y # CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set +CONFIG_BLK_DEV_BSG=y # # IO Schedulers @@ -103,7 +165,8 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # # Processor type and features @@ -111,18 +174,21 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y -# CONFIG_X86_PC is not set +CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set -CONFIG_X86_GENERICARCH=y +# CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set -# CONFIG_PARAVIRT is not set -CONFIG_X86_CYCLONE_TIMER=y +# CONFIG_X86_RDC321X is not set +# CONFIG_X86_VSMP is not set +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_PARAVIRT_GUEST is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set @@ -130,9 +196,8 @@ CONFIG_X86_CYCLONE_TIMER=y # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set -CONFIG_MPENTIUMIII=y +# CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set -# CONFIG_MCORE2 is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set @@ -147,14 +212,14 @@ CONFIG_MPENTIUMIII=y # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set -CONFIG_X86_GENERIC=y +# CONFIG_MPSC is not set +CONFIG_MCORE2=y +# CONFIG_GENERIC_CPU is not set +# CONFIG_X86_GENERIC is not set +CONFIG_X86_CPU=y CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_XADD=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y @@ -162,106 +227,120 @@ CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y +CONFIG_X86_P6_NOP=y CONFIG_X86_TSC=y -CONFIG_X86_CMOV=y -CONFIG_X86_MINIMUM_CPU_FAMILY=4 +CONFIG_X86_MINIMUM_CPU_FAMILY=6 +CONFIG_X86_DEBUGCTLMSR=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y -CONFIG_NR_CPUS=32 -CONFIG_SCHED_SMT=y +CONFIG_DMI=y +# CONFIG_IOMMU_HELPER is not set +CONFIG_NR_CPUS=4 +# CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y -CONFIG_X86_MCE=y -CONFIG_X86_MCE_NONFATAL=y -CONFIG_X86_MCE_P4THERMAL=y +# CONFIG_X86_MCE is not set CONFIG_VM86=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_X86_REBOOTFIXUPS is not set -CONFIG_MICROCODE=y -CONFIG_MICROCODE_OLD_INTERFACE=y +# CONFIG_MICROCODE is not set CONFIG_X86_MSR=y CONFIG_X86_CPUID=y - -# -# Firmware Drivers -# -# CONFIG_EDD is not set -# CONFIG_DELL_RBU is not set -# CONFIG_DCDBAS is not set -CONFIG_DMIID=y # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_HIGHMEM=y -CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_NEED_NODE_MEMMAP_SIZE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y +# CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set + +# +# Memory hotplug is currently incompatible with Software Suspend +# +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y -CONFIG_NR_QUICK=1 CONFIG_VIRT_TO_BUS=y # CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y -# CONFIG_EFI is not set +# CONFIG_X86_PAT is not set +CONFIG_EFI=y # CONFIG_IRQBALANCE is not set CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set -CONFIG_HZ_250=y +# CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set -CONFIG_PHYSICAL_START=0x100000 -# CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_ALIGN=0x100000 -# CONFIG_HOTPLUG_CPU is not set -CONFIG_COMPAT_VDSO=y +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +CONFIG_SCHED_HRTICK=y +CONFIG_KEXEC=y +CONFIG_CRASH_DUMP=y +CONFIG_PHYSICAL_START=0x1000000 +CONFIG_RELOCATABLE=y +CONFIG_PHYSICAL_ALIGN=0x200000 +CONFIG_HOTPLUG_CPU=y +# CONFIG_COMPAT_VDSO is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # -# Power management options (ACPI, APM) +# Power management options # CONFIG_PM=y -CONFIG_PM_LEGACY=y -# CONFIG_PM_DEBUG is not set - -# -# ACPI (Advanced Configuration and Power Interface) Support -# +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_TRACE=y +CONFIG_PM_TRACE_RTC=y +CONFIG_PM_SLEEP_SMP=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="" CONFIG_ACPI=y +CONFIG_ACPI_SLEEP=y CONFIG_ACPI_PROCFS=y +CONFIG_ACPI_PROCFS_POWER=y +CONFIG_ACPI_SYSFS_POWER=y +CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y -# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_DOCK=y +# CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=y +CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y +# CONFIG_ACPI_WMI is not set # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set -CONFIG_ACPI_BLACKLIST_YEAR=2001 -CONFIG_ACPI_DEBUG=y +# CONFIG_ACPI_CUSTOM_DSDT is not set +CONFIG_ACPI_BLACKLIST_YEAR=0 +# CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y -# CONFIG_ACPI_CONTAINER is not set +CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set # CONFIG_APM is not set @@ -271,15 +350,17 @@ CONFIG_X86_PM_TIMER=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_STAT is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # CPUFreq processor drivers @@ -287,8 +368,7 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y CONFIG_X86_ACPI_CPUFREQ=y # CONFIG_X86_POWERNOW_K6 is not set # CONFIG_X86_POWERNOW_K7 is not set -CONFIG_X86_POWERNOW_K8=y -CONFIG_X86_POWERNOW_K8_ACPI=y +# CONFIG_X86_POWERNOW_K8 is not set # CONFIG_X86_GX_SUSPMOD is not set # CONFIG_X86_SPEEDSTEP_CENTRINO is not set # CONFIG_X86_SPEEDSTEP_ICH is not set @@ -302,43 +382,72 @@ CONFIG_X86_POWERNOW_K8_ACPI=y # # shared options # -CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y +# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y # -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# Bus options (PCI etc.) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y +# CONFIG_PCI_GOOLPC is not set CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y -# CONFIG_PCIEPORTBUS is not set +CONFIG_PCI_DOMAINS=y +CONFIG_PCIEPORTBUS=y +# CONFIG_HOTPLUG_PCI_PCIE is not set +CONFIG_PCIEAER=y +# CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set -# CONFIG_HT_IRQ is not set +CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y # CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set +# CONFIG_OLPC is not set CONFIG_K8_NB=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=y +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCCARD_NONSTATIC=y +CONFIG_HOTPLUG_PCI=y +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_IBM is not set +# CONFIG_HOTPLUG_PCI_ACPI is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set + +# +# Executable file formats / Emulations # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_MISC=y # # Networking @@ -349,59 +458,142 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set +CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set +CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +# CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set +CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_INET_LRO=y +# CONFIG_INET_DIAG is not set +CONFIG_TCP_CONG_ADVANCED=y +# CONFIG_TCP_CONG_BIC is not set CONFIG_TCP_CONG_CUBIC=y +# CONFIG_TCP_CONG_WESTWOOD is not set +# CONFIG_TCP_CONG_HTCP is not set +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_VENO is not set +# CONFIG_TCP_CONG_YEAH is not set +# CONFIG_TCP_CONG_ILLINOIS is not set +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set +CONFIG_TCP_MD5SIG=y +# CONFIG_IP_VS is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set +CONFIG_INET6_AH=y +CONFIG_INET6_ESP=y # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y -# CONFIG_INET6_XFRM_MODE_BEET is not set +CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set +# CONFIG_IPV6_MROUTE is not set +CONFIG_NETLABEL=y +CONFIG_NETWORK_SECMARK=y +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_ADVANCED is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK_LOG=y +CONFIG_NF_CONNTRACK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_FTP=y +CONFIG_NF_CONNTRACK_IRC=y +CONFIG_NF_CONNTRACK_SIP=y +CONFIG_NF_CT_NETLINK=y +CONFIG_NETFILTER_XTABLES=y +CONFIG_NETFILTER_XT_TARGET_MARK=y +CONFIG_NETFILTER_XT_TARGET_NFLOG=y +CONFIG_NETFILTER_XT_TARGET_SECMARK=y +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y +CONFIG_NETFILTER_XT_TARGET_TCPMSS=y +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y +CONFIG_NETFILTER_XT_MATCH_MARK=y +CONFIG_NETFILTER_XT_MATCH_POLICY=y +CONFIG_NETFILTER_XT_MATCH_STATE=y + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=y +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +CONFIG_IP_NF_TARGET_LOG=y +CONFIG_IP_NF_TARGET_ULOG=y +CONFIG_NF_NAT=y +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=y +CONFIG_NF_NAT_FTP=y +CONFIG_NF_NAT_IRC=y +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set +CONFIG_NF_NAT_SIP=y +CONFIG_IP_NF_MANGLE=y + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=y +CONFIG_IP6_NF_IPTABLES=y +CONFIG_IP6_NF_MATCH_IPV6HEADER=y +CONFIG_IP6_NF_FILTER=y +CONFIG_IP6_NF_TARGET_LOG=y +CONFIG_IP6_NF_TARGET_REJECT=y +CONFIG_IP6_NF_MANGLE=y # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set @@ -409,6 +601,7 @@ CONFIG_IPV6_SIT=y # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set +CONFIG_LLC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set @@ -416,28 +609,99 @@ CONFIG_IPV6_SIT=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_RR is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_INGRESS is not set + +# +# Classification +# +CONFIG_NET_CLS=y +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +# CONFIG_NET_EMATCH_CMP is not set +# CONFIG_NET_EMATCH_NBYTE is not set +# CONFIG_NET_EMATCH_U32 is not set +# CONFIG_NET_EMATCH_META is not set +# CONFIG_NET_EMATCH_TEXT is not set +CONFIG_NET_CLS_ACT=y +# CONFIG_NET_ACT_POLICE is not set +# CONFIG_NET_ACT_GACT is not set +# CONFIG_NET_ACT_MIRRED is not set +# CONFIG_NET_ACT_IPT is not set +# CONFIG_NET_ACT_NAT is not set +# CONFIG_NET_ACT_PEDIT is not set +# CONFIG_NET_ACT_SIMP is not set +CONFIG_NET_SCH_FIFO=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set -# CONFIG_HAMRADIO is not set +CONFIG_HAMRADIO=y + +# +# Packet Radio protocols +# +# CONFIG_AX25 is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y # # Wireless # -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set +CONFIG_CFG80211=y +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_NONE is not set + +# +# Selecting 'y' for an algorithm will +# + +# +# build the algorithm into mac80211. +# +CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set +# CONFIG_MAC80211_DEBUG is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -449,13 +713,15 @@ CONFIG_IPV6_SIT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set +CONFIG_DEBUG_DEVRES=y # CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y @@ -466,7 +732,7 @@ CONFIG_PNP=y # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_FD=y +# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -479,8 +745,8 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -489,73 +755,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ACER_WMI is not set +# CONFIG_ASUS_LAPTOP is not set +# CONFIG_FUJITSU_LAPTOP is not set +# CONFIG_TC1100_WMI is not set +# CONFIG_MSI_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_HD_IDE is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -CONFIG_BLK_DEV_IDEACPI=y -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_CMD640 is not set -# CONFIG_BLK_DEV_IDEPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -CONFIG_IDEPCI_PCIBUS_ORDER=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_RZ1000 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_BLK_DEV_ATIIXP is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_CS5535 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_SC1200 is not set -CONFIG_BLK_DEV_PIIX=y -# CONFIG_BLK_DEV_IT8213 is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SIS5513 is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_BLK_DEV_HD is not set +# CONFIG_INTEL_MENLOW is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support @@ -564,8 +774,8 @@ CONFIG_BLK_DEV_IDEDMA=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set -CONFIG_SCSI_NETLINK=y -# CONFIG_SCSI_PROC_FS is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) @@ -574,7 +784,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set @@ -582,7 +792,7 @@ CONFIG_CHR_DEV_SG=y # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set +CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m @@ -591,81 +801,37 @@ CONFIG_SCSI_WAIT_SCAN=m # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -CONFIG_BLK_DEV_3W_XXXX_RAID=y -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -CONFIG_SCSI_AIC7XXX=y -CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 -CONFIG_AIC7XXX_RESET_DELAY_MS=5000 -CONFIG_AIC7XXX_DEBUG_ENABLE=y -CONFIG_AIC7XXX_DEBUG_MASK=0 -CONFIG_AIC7XXX_REG_PRETTY_PRINT=y -# CONFIG_SCSI_AIC7XXX_OLD is not set -CONFIG_SCSI_AIC79XX=y -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=4000 -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y -CONFIG_SATA_SVW=y +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set CONFIG_ATA_PIIX=y # CONFIG_SATA_MV is not set -CONFIG_SATA_NV=y +# CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set -CONFIG_SATA_SIL=y -# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIL is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set -CONFIG_SATA_VIA=y +# CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ACPI is not set # CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set +CONFIG_PATA_AMD=y # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set @@ -673,6 +839,7 @@ CONFIG_SATA_VIA=y # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CS5535 is not set +# CONFIG_PATA_CS5536 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_ATA_GENERIC is not set @@ -686,11 +853,14 @@ CONFIG_SATA_VIA=y # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set +CONFIG_PATA_OLDPIIX=y # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set @@ -702,65 +872,42 @@ CONFIG_SATA_VIA=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_MD=y +# CONFIG_MD_LINEAR is not set +# CONFIG_MD_RAID0 is not set +# CONFIG_MD_RAID1 is not set +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y # CONFIG_DM_DEBUG is not set # CONFIG_DM_CRYPT is not set # CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set +CONFIG_DM_MIRROR=y +CONFIG_DM_ZERO=y # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=y -CONFIG_FUSION_SPI=y -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set -CONFIG_FUSION_MAX_SGE=128 -# CONFIG_FUSION_CTL is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set -CONFIG_IEEE1394=y - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# Controllers -# - -# -# Texas Instruments PCILynx requires I2C -# -CONFIG_IEEE1394_OHCI1394=y - -# -# Protocols -# -# CONFIG_IEEE1394_VIDEO1394 is not set -# CONFIG_IEEE1394_SBP2 is not set -# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set -# CONFIG_IEEE1394_ETH1394 is not set -# CONFIG_IEEE1394_DV1394 is not set -CONFIG_IEEE1394_RAWIO=y +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_MACINTOSH_DRIVERS=y -# CONFIG_MAC_EMUMOUSEBTN is not set +CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y -CONFIG_NETDEVICES_MULTIQUEUE=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_IFB is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set @@ -770,38 +917,40 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y -CONFIG_VORTEX=y +# CONFIG_VORTEX is not set # CONFIG_TYPHOON is not set CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set -CONFIG_TULIP=y -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -# CONFIG_TULIP_NAPI is not set +# CONFIG_TULIP is not set # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set +# CONFIG_PCMCIA_XIRCOM is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set -CONFIG_B44=y +# CONFIG_B44 is not set CONFIG_FORCEDETH=y # CONFIG_FORCEDETH_NAPI is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set -CONFIG_8139CP=y +# CONFIG_8139CP is not set CONFIG_8139TOO=y -# CONFIG_8139TOO_PIO is not set +CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -814,34 +963,75 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set -CONFIG_R8169=y -# CONFIG_R8169_NAPI is not set +# CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set CONFIG_SKY2=y +# CONFIG_SKY2_DEBUG is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y -CONFIG_BNX2=y +# CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set -# CONFIG_TR is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set +CONFIG_TR=y +# CONFIG_IBMOL is not set +# CONFIG_IBMLS is not set +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_LIBERTAS is not set +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_ADM8211 is not set +# CONFIG_P54_COMMON is not set +CONFIG_ATH5K=y +# CONFIG_ATH5K_DEBUG is not set +# CONFIG_IWLWIFI is not set +# CONFIG_IWLCORE is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set # # USB Network Adapters @@ -850,16 +1040,27 @@ CONFIG_NETDEV_10000=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +# CONFIG_PCMCIA_PCNET is not set +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set +# CONFIG_PCMCIA_IBMTR is not set # CONFIG_WAN is not set -# CONFIG_FDDI is not set +CONFIG_FDDI=y +# CONFIG_DEFXX is not set +# CONFIG_SKFP is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y @@ -870,18 +1071,17 @@ CONFIG_NET_POLL_CONTROLLER=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_POLLDEV=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -906,17 +1106,63 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_ANALOG is not set +# CONFIG_JOYSTICK_A3D is not set +# CONFIG_JOYSTICK_ADI is not set +# CONFIG_JOYSTICK_COBRA is not set +# CONFIG_JOYSTICK_GF2K is not set +# CONFIG_JOYSTICK_GRIP is not set +# CONFIG_JOYSTICK_GRIP_MP is not set +# CONFIG_JOYSTICK_GUILLEMOT is not set +# CONFIG_JOYSTICK_INTERACT is not set +# CONFIG_JOYSTICK_SIDEWINDER is not set +# CONFIG_JOYSTICK_TMDC is not set +# CONFIG_JOYSTICK_IFORCE is not set +# CONFIG_JOYSTICK_WARRIOR is not set +# CONFIG_JOYSTICK_MAGELLAN is not set +# CONFIG_JOYSTICK_SPACEORB is not set +# CONFIG_JOYSTICK_SPACEBALL is not set +# CONFIG_JOYSTICK_STINGER is not set +# CONFIG_JOYSTICK_TWIDJOY is not set +# CONFIG_JOYSTICK_ZHENHUA is not set +# CONFIG_JOYSTICK_JOYDUMP is not set +# CONFIG_JOYSTICK_XPAD is not set +CONFIG_INPUT_TABLET=y +# CONFIG_TABLET_USB_ACECAD is not set +# CONFIG_TABLET_USB_AIPTEK is not set +# CONFIG_TABLET_USB_GTCO is not set +# CONFIG_TABLET_USB_KBTAB is not set +# CONFIG_TABLET_USB_WACOM is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_PCSPKR is not set +# CONFIG_INPUT_APANEL is not set +# CONFIG_INPUT_WISTRON_BTNS is not set +# CONFIG_INPUT_ATLAS_BTNS is not set +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_UINPUT is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y @@ -929,8 +1175,26 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINK is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_RIO is not set +# CONFIG_STALDRV is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -940,9 +1204,14 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y -CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support @@ -951,89 +1220,275 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_INTEL=y -CONFIG_HW_RANDOM_AMD=y +# CONFIG_HW_RANDOM_INTEL is not set +# CONFIG_HW_RANDOM_AMD is not set CONFIG_HW_RANDOM_GEODE=y CONFIG_HW_RANDOM_VIA=y -# CONFIG_NVRAM is not set -CONFIG_RTC=y +CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set -CONFIG_AGP=y -# CONFIG_AGP_ALI is not set -# CONFIG_AGP_ATI is not set -# CONFIG_AGP_AMD is not set -CONFIG_AGP_AMD64=y -CONFIG_AGP_INTEL=y -# CONFIG_AGP_NVIDIA is not set -# CONFIG_AGP_SIS is not set -# CONFIG_AGP_SWORKS is not set -# CONFIG_AGP_VIA is not set -# CONFIG_AGP_EFFICEON is not set -# CONFIG_DRM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_NSC_GPIO is not set # CONFIG_CS5535_GPIO is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=256 +# CONFIG_RAW_DRIVER is not set CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set -CONFIG_HPET_MMAP=y +# CONFIG_HPET_MMAP is not set # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set - -# -# SPI support -# +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +CONFIG_I2C_I801=y +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set # CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +# CONFIG_ALIM1535_WDT is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_SC520_WDT is not set +# CONFIG_EUROTECH_WDT is not set +# CONFIG_IB700_WDT is not set +# CONFIG_IBMASR is not set +# CONFIG_WAFER_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_ITCO_WDT is not set +# CONFIG_IT8712F_WDT is not set +# CONFIG_HP_WATCHDOG is not set +# CONFIG_SC1200_WDT is not set +# CONFIG_PC87413_WDT is not set +# CONFIG_60XX_WDT is not set +# CONFIG_SBC8360_WDT is not set +# CONFIG_SBC7240_WDT is not set +# CONFIG_CPU5_WDT is not set +# CONFIG_SMSC37B787_WDT is not set +# CONFIG_W83627HF_WDT is not set +# CONFIG_W83697HF_WDT is not set +# CONFIG_W83877F_WDT is not set +# CONFIG_W83977F_WDT is not set +# CONFIG_MACHZ_WDT is not set +# CONFIG_SBC_EPX_C3_WATCHDOG is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_AGP=y +# CONFIG_AGP_ALI is not set +# CONFIG_AGP_ATI is not set +# CONFIG_AGP_AMD is not set +CONFIG_AGP_AMD64=y +CONFIG_AGP_INTEL=y +# CONFIG_AGP_NVIDIA is not set +# CONFIG_AGP_SIS is not set +# CONFIG_AGP_SWORKS is not set +# CONFIG_AGP_VIA is not set +# CONFIG_AGP_EFFICEON is not set +CONFIG_DRM=y +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_I810 is not set +# CONFIG_DRM_I830 is not set +CONFIG_DRM_I915=y +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_SIS is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_VESA is not set +CONFIG_FB_EFI=y +# CONFIG_FB_IMAC is not set +# CONFIG_FB_N411 is not set +# CONFIG_FB_HGA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I810 is not set +# CONFIG_FB_LE80578 is not set +# CONFIG_FB_INTEL is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_GEODE is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set +# CONFIG_BACKLIGHT_PROGEAR is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y -CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128 +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y # # Sound @@ -1043,33 +1498,167 @@ CONFIG_SOUND=y # # Advanced Linux Sound Architecture # -# CONFIG_SND is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_SEQ_DUMMY=y +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y + +# +# Generic devices +# +# CONFIG_SND_PCSP is not set +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set +# CONFIG_SND_CS5535AUDIO is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +CONFIG_SND_HDA_INTEL=y +CONFIG_SND_HDA_HWDEP=y +CONFIG_SND_HDA_CODEC_REALTEK=y +CONFIG_SND_HDA_CODEC_ANALOG=y +CONFIG_SND_HDA_CODEC_SIGMATEL=y +CONFIG_SND_HDA_CODEC_VIA=y +CONFIG_SND_HDA_CODEC_ATIHDMI=y +CONFIG_SND_HDA_CODEC_CONEXANT=y +CONFIG_SND_HDA_CODEC_CMEDIA=y +CONFIG_SND_HDA_CODEC_SI3054=y +CONFIG_SND_HDA_GENERIC=y +# CONFIG_SND_HDA_POWER_SAVE is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SIS7019 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# ALSA SoC audio for Freescale SOCs +# + +# +# SoC Audio for the Texas Instruments OMAP +# # # Open Sound System # -CONFIG_SOUND_PRIME=y -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_OSS is not set +# CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set +CONFIG_HID_DEBUG=y +CONFIG_HIDRAW=y # # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set +CONFIG_USB_HIDINPUT_POWERBOOK=y +CONFIG_HID_FF=y +CONFIG_HID_PID=y +CONFIG_LOGITECH_FF=y +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_PANTHERLORD_FF=y +CONFIG_THRUSTMASTER_FF=y +CONFIG_ZEROPLUS_FF=y +CONFIG_USB_HIDDEV=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y -# CONFIG_USB_DEBUG is not set +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options @@ -1077,18 +1666,18 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set +CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1121,8 +1710,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_LIBUSUAL=y # # USB Imaging devices @@ -1134,10 +1725,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1163,90 +1750,125 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y # -# USB DSL modem support +# LED drivers # +# CONFIG_LEDS_CLEVO_MAIL is not set # -# USB Gadget Support +# LED Triggers # -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_EDAC=y # -# LED devices +# Reporting subsystems # -# CONFIG_NEW_LEDS is not set +# CONFIG_EDAC_DEBUG is not set +# CONFIG_EDAC_MM_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set # -# LED drivers +# RTC interfaces # +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# LED Triggers +# I2C RTC drivers # -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # -# Real Time Clock +# SPI RTC drivers # -# CONFIG_RTC_CLASS is not set # -# DMA Engine support +# Platform RTC drivers # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# DMA Clients +# on-CPU RTC drivers # +CONFIG_DMADEVICES=y # # DMA Devices # -CONFIG_VIRTUALIZATION=y -# CONFIG_KVM is not set +# CONFIG_INTEL_IOATDMA is not set +# CONFIG_UIO is not set # -# Userspace I/O +# Firmware Drivers # -# CONFIG_UIO is not set +# CONFIG_EDD is not set +CONFIG_EFI_VARS=y +# CONFIG_DELL_RBU is not set +# CONFIG_DCDBAS is not set +CONFIG_DMIID=y +# CONFIG_ISCSI_IBFT_FIND is not set # # File systems # -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y -# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -# CONFIG_REISERFS_FS_SECURITY is not set +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1256,8 +1878,8 @@ CONFIG_GENERIC_ACL=y # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set +CONFIG_JOLIET=y +CONFIG_ZISOFS=y # CONFIG_UDF_FS is not set # @@ -1275,13 +1897,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1289,6 +1911,7 @@ CONFIG_RAMFS=y # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -1296,33 +1919,15 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set @@ -1332,14 +1937,26 @@ CONFIG_SUNRPC=y # # Partition Types # -# CONFIG_PARTITION_ADVANCED is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_LDM_PARTITION is not set +CONFIG_SGI_PARTITION=y +# CONFIG_ULTRIX_PARTITION is not set +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set @@ -1374,37 +1991,33 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_KPROBES=y # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y -# CONFIG_DEBUG_FS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set +CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1419,48 +2032,174 @@ CONFIG_TIMER_STATS=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set -# CONFIG_FRAME_POINTER is not set -CONFIG_OPTIMIZE_INLINING=y +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_PROVIDE_OHCI1394_DMA_INIT=y +# CONFIG_SAMPLES is not set +# CONFIG_KGDB is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_NONPROMISC_DEVMEM is not set CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_RODATA is not set +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_X86_PTDUMP is not set +CONFIG_DEBUG_RODATA=y +# CONFIG_DEBUG_RODATA_TEST is not set +CONFIG_DEBUG_NX_TEST=m # CONFIG_4KSTACKS is not set CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y CONFIG_DOUBLEFAULT=y +CONFIG_IO_DELAY_TYPE_0X80=0 +CONFIG_IO_DELAY_TYPE_0XED=1 +CONFIG_IO_DELAY_TYPE_UDELAY=2 +CONFIG_IO_DELAY_TYPE_NONE=3 +CONFIG_IO_DELAY_0X80=y +# CONFIG_IO_DELAY_0XED is not set +# CONFIG_IO_DELAY_UDELAY is not set +# CONFIG_IO_DELAY_NONE is not set +CONFIG_DEFAULT_IO_DELAY_TYPE=0 +CONFIG_DEBUG_BOOT_PARAMS=y +# CONFIG_CPA_DEBUG is not set # # Security options # -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_CRYPTO is not set +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +# CONFIG_SECURITY_NETWORK_XFRM is not set +CONFIG_SECURITY_CAPABILITIES=y +CONFIG_SECURITY_FILE_CAPABILITIES=y +# CONFIG_SECURITY_ROOTPLUG is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536 +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set +# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set +# CONFIG_SECURITY_SMACK is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_AES_586 is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SALSA20_586 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_TWOFISH_586 is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_PADLOCK is not set +# CONFIG_CRYPTO_DEV_GEODE is not set +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_HAVE_KVM=y +CONFIG_VIRTUALIZATION=y +# CONFIG_KVM is not set +# CONFIG_LGUEST is not set +# CONFIG_VIRTIO_PCI is not set +# CONFIG_VIRTIO_BALLOON is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_X86_SMP=y -CONFIG_X86_HT=y -CONFIG_X86_BIOS_REBOOT=y -CONFIG_X86_TRAMPOLINE=y -CONFIG_KTIME_SCALAR=y diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index 2d6f5b2..ae5124e 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -1,64 +1,103 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-git14 -# Fri Jul 20 09:53:15 2007 +# Linux kernel version: 2.6.26-rc1 +# Sun May 4 19:59:57 2008 # -CONFIG_X86_64=y CONFIG_64BIT=y +# CONFIG_X86_32 is not set +CONFIG_X86_64=y CONFIG_X86=y +CONFIG_DEFCONFIG_LIST="arch/x86/configs/x86_64_defconfig" +# CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_ZONE_DMA32=y +CONFIG_CLOCKSOURCE_WATCHDOG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y -CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y -CONFIG_QUICKLIST=y -CONFIG_NR_QUICK=2 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_X86_CMPXCHG=y -CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_DMI=y -CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_HWEIGHT=y +# CONFIG_GENERIC_GPIO is not set +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_ARCH_HAS_CPU_RELAX=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ZONE_DMA32=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_AUDIT_ARCH=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_X86_SMP=y +CONFIG_X86_64_SMP=y +CONFIG_X86_HT=y +CONFIG_X86_BIOS_REBOOT=y +CONFIG_X86_TRAMPOLINE=y +# CONFIG_KTIME_SCALAR is not set # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=18 -# CONFIG_CPUSETS is not set -CONFIG_SYSFS_DEPRECATED=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_TREE=y +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_CGROUP_NS=y +# CONFIG_CGROUP_DEVICE is not set +CONFIG_CPUSETS=y +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +# CONFIG_USER_SCHED is not set +CONFIG_CGROUP_SCHED=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +# CONFIG_CGROUP_MEM_RES_CTLR is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_PROC_PID_CPUSET=y CONFIG_RELAY=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -66,13 +105,15 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -82,9 +123,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_MARKERS=y +# CONFIG_OPROFILE is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -96,14 +149,15 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_KMOD is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set @@ -111,107 +165,177 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # # Processor type and features # +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_SMP=y CONFIG_X86_PC=y +# CONFIG_X86_ELAN is not set +# CONFIG_X86_VOYAGER is not set +# CONFIG_X86_NUMAQ is not set +# CONFIG_X86_SUMMIT is not set +# CONFIG_X86_BIGSMP is not set +# CONFIG_X86_VISWS is not set +# CONFIG_X86_GENERICARCH is not set +# CONFIG_X86_ES7000 is not set +# CONFIG_X86_RDC321X is not set # CONFIG_X86_VSMP is not set +# CONFIG_PARAVIRT_GUEST is not set +CONFIG_MEMTEST_BOOTPARAM=y +CONFIG_MEMTEST_BOOTPARAM_VALUE=0 +# CONFIG_M386 is not set +# CONFIG_M486 is not set +# CONFIG_M586 is not set +# CONFIG_M586TSC is not set +# CONFIG_M586MMX is not set +# CONFIG_M686 is not set +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set +# CONFIG_MPENTIUM4 is not set +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set # CONFIG_MK8 is not set +# CONFIG_MCRUSOE is not set +# CONFIG_MEFFICEON is not set +# CONFIG_MWINCHIPC6 is not set +# CONFIG_MWINCHIP2 is not set +# CONFIG_MWINCHIP3D is not set +# CONFIG_MGEODEGX1 is not set +# CONFIG_MGEODE_LX is not set +# CONFIG_MCYRIXIII is not set +# CONFIG_MVIAC3_2 is not set +# CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set -# CONFIG_MCORE2 is not set -CONFIG_GENERIC_CPU=y -CONFIG_X86_L1_CACHE_BYTES=128 -CONFIG_X86_L1_CACHE_SHIFT=7 -CONFIG_X86_INTERNODE_CACHE_BYTES=128 -CONFIG_X86_TSC=y +CONFIG_MCORE2=y +# CONFIG_GENERIC_CPU is not set +CONFIG_X86_CPU=y +CONFIG_X86_L1_CACHE_BYTES=64 +CONFIG_X86_INTERNODE_CACHE_BYTES=64 +CONFIG_X86_CMPXCHG=y +CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_GOOD_APIC=y -# CONFIG_MICROCODE is not set -CONFIG_X86_MSR=y -CONFIG_X86_CPUID=y -CONFIG_X86_HT=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_MTRR=y -CONFIG_SMP=y -CONFIG_SCHED_SMT=y +CONFIG_X86_INTEL_USERCOPY=y +CONFIG_X86_USE_PPRO_CHECKSUM=y +CONFIG_X86_P6_NOP=y +CONFIG_X86_TSC=y +CONFIG_X86_CMOV=y +CONFIG_X86_MINIMUM_CPU_FAMILY=64 +CONFIG_X86_DEBUGCTLMSR=y +CONFIG_HPET_TIMER=y +CONFIG_HPET_EMULATE_RTC=y +CONFIG_DMI=y +CONFIG_GART_IOMMU=y +CONFIG_CALGARY_IOMMU=y +CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y +CONFIG_SWIOTLB=y +CONFIG_IOMMU_HELPER=y +CONFIG_NR_CPUS=4 +# CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y +CONFIG_X86_LOCAL_APIC=y +CONFIG_X86_IO_APIC=y +# CONFIG_X86_MCE is not set +# CONFIG_I8K is not set +# CONFIG_MICROCODE is not set +CONFIG_X86_MSR=y +CONFIG_X86_CPUID=y CONFIG_NUMA=y CONFIG_K8_NUMA=y -CONFIG_NODES_SHIFT=6 CONFIG_X86_64_ACPI_NUMA=y -CONFIG_NUMA_EMU=y +CONFIG_NODES_SPAN_OTHER_NODES=y +# CONFIG_NUMA_EMU is not set +CONFIG_NODES_SHIFT=6 +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSEMEM_VMEMMAP=y + +# +# Memory hotplug is currently incompatible with Software Suspend +# +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y -CONFIG_OUT_OF_LINE_PFN_TO_PAGE=y -CONFIG_NR_CPUS=32 -CONFIG_PHYSICAL_ALIGN=0x200000 -CONFIG_HOTPLUG_CPU=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_HPET_TIMER=y -CONFIG_HPET_EMULATE_RTC=y -CONFIG_GART_IOMMU=y -# CONFIG_CALGARY_IOMMU is not set -CONFIG_SWIOTLB=y -CONFIG_X86_MCE=y -CONFIG_X86_MCE_INTEL=y -CONFIG_X86_MCE_AMD=y -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set -# CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_START=0x200000 +CONFIG_MTRR=y +# CONFIG_X86_PAT is not set +CONFIG_EFI=y CONFIG_SECCOMP=y -# CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set -CONFIG_HZ_250=y +# CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_K8_NB=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_ISA_DMA_API=y -CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +CONFIG_SCHED_HRTICK=y +CONFIG_KEXEC=y +CONFIG_CRASH_DUMP=y +CONFIG_PHYSICAL_START=0x1000000 +CONFIG_RELOCATABLE=y +CONFIG_PHYSICAL_ALIGN=0x200000 +CONFIG_HOTPLUG_CPU=y +# CONFIG_COMPAT_VDSO is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y # # Power management options # +CONFIG_ARCH_HIBERNATION_HEADER=y CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_TRACE=y +CONFIG_PM_TRACE_RTC=y +CONFIG_PM_SLEEP_SMP=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" - -# -# ACPI (Advanced Configuration and Power Interface) Support -# CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SLEEP_PROC_FS=y -CONFIG_ACPI_SLEEP_PROC_SLEEP=y CONFIG_ACPI_PROCFS=y +CONFIG_ACPI_PROCFS_POWER=y +CONFIG_ACPI_SYSFS_POWER=y +CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y -# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_DOCK=y +# CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_NUMA=y +# CONFIG_ACPI_WMI is not set # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set +# CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y @@ -227,29 +351,34 @@ CONFIG_ACPI_CONTAINER=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_STAT is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # CPUFreq processor drivers # -CONFIG_X86_POWERNOW_K8=y -CONFIG_X86_POWERNOW_K8_ACPI=y -# CONFIG_X86_SPEEDSTEP_CENTRINO is not set CONFIG_X86_ACPI_CPUFREQ=y +# CONFIG_X86_POWERNOW_K8 is not set +# CONFIG_X86_SPEEDSTEP_CENTRINO is not set +# CONFIG_X86_P4_CLOCKMOD is not set # # shared options # -CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y +# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y # # Bus options (PCI etc.) @@ -257,27 +386,56 @@ CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y +CONFIG_PCI_DOMAINS=y +CONFIG_DMAR=y +CONFIG_DMAR_GFX_WA=y +CONFIG_DMAR_FLOPPY_WA=y CONFIG_PCIEPORTBUS=y +# CONFIG_HOTPLUG_PCI_PCIE is not set CONFIG_PCIEAER=y +# CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set -# CONFIG_HT_IRQ is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set +CONFIG_HT_IRQ=y +CONFIG_ISA_DMA_API=y +CONFIG_K8_NB=y +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=y +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCCARD_NONSTATIC=y +CONFIG_HOTPLUG_PCI=y +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_ACPI is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set +CONFIG_COMPAT_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y CONFIG_IA32_EMULATION=y -CONFIG_IA32_AOUT=y +# CONFIG_IA32_AOUT is not set CONFIG_COMPAT=y +CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y # @@ -289,22 +447,31 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set +CONFIG_PACKET_MMAP=y CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +# CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set +CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -313,31 +480,109 @@ CONFIG_INET_TUNNEL=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_INET_LRO=y +# CONFIG_INET_DIAG is not set +CONFIG_TCP_CONG_ADVANCED=y +# CONFIG_TCP_CONG_BIC is not set CONFIG_TCP_CONG_CUBIC=y +# CONFIG_TCP_CONG_WESTWOOD is not set +# CONFIG_TCP_CONG_HTCP is not set +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_VENO is not set +# CONFIG_TCP_CONG_YEAH is not set +# CONFIG_TCP_CONG_ILLINOIS is not set +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set +CONFIG_TCP_MD5SIG=y +# CONFIG_IP_VS is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set +CONFIG_INET6_AH=y +CONFIG_INET6_ESP=y # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET6_XFRM_MODE_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_BEET is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set +# CONFIG_IPV6_MROUTE is not set +CONFIG_NETLABEL=y +CONFIG_NETWORK_SECMARK=y +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_ADVANCED is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK_LOG=y +CONFIG_NF_CONNTRACK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_FTP=y +CONFIG_NF_CONNTRACK_IRC=y +CONFIG_NF_CONNTRACK_SIP=y +CONFIG_NF_CT_NETLINK=y +CONFIG_NETFILTER_XTABLES=y +CONFIG_NETFILTER_XT_TARGET_MARK=y +CONFIG_NETFILTER_XT_TARGET_NFLOG=y +CONFIG_NETFILTER_XT_TARGET_SECMARK=y +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y +CONFIG_NETFILTER_XT_TARGET_TCPMSS=y +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y +CONFIG_NETFILTER_XT_MATCH_MARK=y +CONFIG_NETFILTER_XT_MATCH_POLICY=y +CONFIG_NETFILTER_XT_MATCH_STATE=y + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=y +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +CONFIG_IP_NF_TARGET_LOG=y +CONFIG_IP_NF_TARGET_ULOG=y +CONFIG_NF_NAT=y +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=y +CONFIG_NF_NAT_FTP=y +CONFIG_NF_NAT_IRC=y +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set +CONFIG_NF_NAT_SIP=y +CONFIG_IP_NF_MANGLE=y + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=y +CONFIG_IP6_NF_IPTABLES=y +CONFIG_IP6_NF_MATCH_IPV6HEADER=y +CONFIG_IP6_NF_FILTER=y +CONFIG_IP6_NF_TARGET_LOG=y +CONFIG_IP6_NF_TARGET_REJECT=y +CONFIG_IP6_NF_MANGLE=y # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set @@ -345,6 +590,7 @@ CONFIG_IPV6_SIT=y # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set +CONFIG_LLC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set @@ -352,28 +598,99 @@ CONFIG_IPV6_SIT=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_RR is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_INGRESS is not set + +# +# Classification +# +CONFIG_NET_CLS=y +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +# CONFIG_NET_EMATCH_CMP is not set +# CONFIG_NET_EMATCH_NBYTE is not set +# CONFIG_NET_EMATCH_U32 is not set +# CONFIG_NET_EMATCH_META is not set +# CONFIG_NET_EMATCH_TEXT is not set +CONFIG_NET_CLS_ACT=y +# CONFIG_NET_ACT_POLICE is not set +# CONFIG_NET_ACT_GACT is not set +# CONFIG_NET_ACT_MIRRED is not set +# CONFIG_NET_ACT_IPT is not set +# CONFIG_NET_ACT_NAT is not set +# CONFIG_NET_ACT_PEDIT is not set +# CONFIG_NET_ACT_SIMP is not set +CONFIG_NET_SCH_FIFO=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set -# CONFIG_HAMRADIO is not set +CONFIG_HAMRADIO=y + +# +# Packet Radio protocols +# +# CONFIG_AX25 is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y # # Wireless # -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set +CONFIG_CFG80211=y +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_NONE is not set + +# +# Selecting 'y' for an algorithm will +# + +# +# build the algorithm into mac80211. +# +CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set +# CONFIG_MAC80211_DEBUG is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -385,13 +702,15 @@ CONFIG_IPV6_SIT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set +CONFIG_DEBUG_DEVRES=y # CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y @@ -402,7 +721,7 @@ CONFIG_PNP=y # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_FD=y +# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -415,8 +734,8 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -425,72 +744,16 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ACER_WMI is not set +# CONFIG_ASUS_LAPTOP is not set +# CONFIG_FUJITSU_LAPTOP is not set +# CONFIG_MSI_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_HD_IDE is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -CONFIG_BLK_DEV_IDEACPI=y -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_CMD640 is not set -# CONFIG_BLK_DEV_IDEPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -CONFIG_IDEPCI_PCIBUS_ORDER=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_RZ1000 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_ATIIXP=y -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_SC1200 is not set -CONFIG_BLK_DEV_PIIX=y -# CONFIG_BLK_DEV_IT8213 is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -CONFIG_BLK_DEV_PDC202XX_NEW=y -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SIS5513 is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_BLK_DEV_HD is not set +# CONFIG_INTEL_MENLOW is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support @@ -499,8 +762,8 @@ CONFIG_BLK_DEV_IDEDMA=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set -CONFIG_SCSI_NETLINK=y -# CONFIG_SCSI_PROC_FS is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) @@ -509,7 +772,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set @@ -526,73 +789,37 @@ CONFIG_SCSI_WAIT_SCAN=m # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -CONFIG_SCSI_SAS_ATTRS=y +# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -CONFIG_SCSI_AIC79XX=y -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=4000 -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y -CONFIG_SATA_SVW=y +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set CONFIG_ATA_PIIX=y # CONFIG_SATA_MV is not set -CONFIG_SATA_NV=y +# CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set -CONFIG_SATA_SIL=y -# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIL is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set -CONFIG_SATA_VIA=y +# CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ACPI is not set # CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set +CONFIG_PATA_AMD=y # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set @@ -612,11 +839,14 @@ CONFIG_SATA_VIA=y # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set +CONFIG_PATA_OLDPIIX=y # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set @@ -628,65 +858,42 @@ CONFIG_SATA_VIA=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_MD=y +# CONFIG_MD_LINEAR is not set +# CONFIG_MD_RAID0 is not set +# CONFIG_MD_RAID1 is not set +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y # CONFIG_DM_DEBUG is not set # CONFIG_DM_CRYPT is not set # CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set +CONFIG_DM_MIRROR=y +CONFIG_DM_ZERO=y # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=y -CONFIG_FUSION_SPI=y -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set -CONFIG_FUSION_MAX_SGE=128 -# CONFIG_FUSION_CTL is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set -CONFIG_IEEE1394=y - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# Controllers -# - -# -# Texas Instruments PCILynx requires I2C -# -CONFIG_IEEE1394_OHCI1394=y - -# -# Protocols -# -# CONFIG_IEEE1394_VIDEO1394 is not set -# CONFIG_IEEE1394_SBP2 is not set -# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set -# CONFIG_IEEE1394_ETH1394 is not set -# CONFIG_IEEE1394_DV1394 is not set -CONFIG_IEEE1394_RAWIO=y +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_MACINTOSH_DRIVERS=y -# CONFIG_MAC_EMUMOUSEBTN is not set +CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y -CONFIG_NETDEVICES_MULTIQUEUE=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_IFB is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set -CONFIG_TUN=y +# CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set @@ -696,39 +903,40 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y -CONFIG_VORTEX=y +# CONFIG_VORTEX is not set # CONFIG_TYPHOON is not set CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set -CONFIG_TULIP=y -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -# CONFIG_TULIP_NAPI is not set +# CONFIG_TULIP is not set # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set +# CONFIG_PCMCIA_XIRCOM is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set -CONFIG_AMD8111_ETH=y -# CONFIG_AMD8111E_NAPI is not set +# CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set -CONFIG_B44=y +# CONFIG_B44 is not set CONFIG_FORCEDETH=y # CONFIG_FORCEDETH_NAPI is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set -CONFIG_8139CP=y +# CONFIG_8139CP is not set CONFIG_8139TOO=y -# CONFIG_8139TOO_PIO is not set +CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -740,34 +948,74 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set -# CONFIG_SKY2 is not set +CONFIG_SKY2=y +# CONFIG_SKY2_DEBUG is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y -CONFIG_BNX2=y +# CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set -CONFIG_S2IO=m -# CONFIG_S2IO_NAPI is not set +# CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set -# CONFIG_TR is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set +CONFIG_TR=y +# CONFIG_IBMOL is not set +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_LIBERTAS is not set +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_ADM8211 is not set +# CONFIG_P54_COMMON is not set +CONFIG_ATH5K=y +# CONFIG_ATH5K_DEBUG is not set +# CONFIG_IWLWIFI is not set +# CONFIG_IWLCORE is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set # # USB Network Adapters @@ -776,16 +1024,26 @@ CONFIG_S2IO=m # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +# CONFIG_PCMCIA_PCNET is not set +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set # CONFIG_WAN is not set -# CONFIG_FDDI is not set +CONFIG_FDDI=y +# CONFIG_DEFXX is not set +# CONFIG_SKFP is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y @@ -796,18 +1054,17 @@ CONFIG_NET_POLL_CONTROLLER=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_POLLDEV=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -832,17 +1089,62 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_ANALOG is not set +# CONFIG_JOYSTICK_A3D is not set +# CONFIG_JOYSTICK_ADI is not set +# CONFIG_JOYSTICK_COBRA is not set +# CONFIG_JOYSTICK_GF2K is not set +# CONFIG_JOYSTICK_GRIP is not set +# CONFIG_JOYSTICK_GRIP_MP is not set +# CONFIG_JOYSTICK_GUILLEMOT is not set +# CONFIG_JOYSTICK_INTERACT is not set +# CONFIG_JOYSTICK_SIDEWINDER is not set +# CONFIG_JOYSTICK_TMDC is not set +# CONFIG_JOYSTICK_IFORCE is not set +# CONFIG_JOYSTICK_WARRIOR is not set +# CONFIG_JOYSTICK_MAGELLAN is not set +# CONFIG_JOYSTICK_SPACEORB is not set +# CONFIG_JOYSTICK_SPACEBALL is not set +# CONFIG_JOYSTICK_STINGER is not set +# CONFIG_JOYSTICK_TWIDJOY is not set +# CONFIG_JOYSTICK_ZHENHUA is not set +# CONFIG_JOYSTICK_JOYDUMP is not set +# CONFIG_JOYSTICK_XPAD is not set +CONFIG_INPUT_TABLET=y +# CONFIG_TABLET_USB_ACECAD is not set +# CONFIG_TABLET_USB_AIPTEK is not set +# CONFIG_TABLET_USB_GTCO is not set +# CONFIG_TABLET_USB_KBTAB is not set +# CONFIG_TABLET_USB_WACOM is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_PCSPKR is not set +# CONFIG_INPUT_APANEL is not set +# CONFIG_INPUT_ATLAS_BTNS is not set +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_UINPUT is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y @@ -855,8 +1157,26 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINK is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_RIO is not set +# CONFIG_STALDRV is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -866,9 +1186,14 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y -CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support @@ -877,78 +1202,260 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_INTEL=y -CONFIG_HW_RANDOM_AMD=y -# CONFIG_NVRAM is not set -CONFIG_RTC=y +# CONFIG_HW_RANDOM_INTEL is not set +# CONFIG_HW_RANDOM_AMD is not set +CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -CONFIG_AGP=y -CONFIG_AGP_AMD64=y -CONFIG_AGP_INTEL=y -# CONFIG_AGP_SIS is not set -# CONFIG_AGP_VIA is not set -# CONFIG_DRM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=256 +# CONFIG_RAW_DRIVER is not set CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set -CONFIG_HPET_MMAP=y +# CONFIG_HPET_MMAP is not set # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set - -# -# SPI support -# +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +CONFIG_I2C_I801=y +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set # CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +# CONFIG_ALIM1535_WDT is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_SC520_WDT is not set +# CONFIG_EUROTECH_WDT is not set +# CONFIG_IB700_WDT is not set +# CONFIG_IBMASR is not set +# CONFIG_WAFER_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_ITCO_WDT is not set +# CONFIG_IT8712F_WDT is not set +# CONFIG_HP_WATCHDOG is not set +# CONFIG_SC1200_WDT is not set +# CONFIG_PC87413_WDT is not set +# CONFIG_60XX_WDT is not set +# CONFIG_SBC8360_WDT is not set +# CONFIG_CPU5_WDT is not set +# CONFIG_SMSC37B787_WDT is not set +# CONFIG_W83627HF_WDT is not set +# CONFIG_W83697HF_WDT is not set +# CONFIG_W83877F_WDT is not set +# CONFIG_W83977F_WDT is not set +# CONFIG_MACHZ_WDT is not set +# CONFIG_SBC_EPX_C3_WATCHDOG is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_AGP=y +CONFIG_AGP_AMD64=y +CONFIG_AGP_INTEL=y +# CONFIG_AGP_SIS is not set +# CONFIG_AGP_VIA is not set +CONFIG_DRM=y +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_I810 is not set +# CONFIG_DRM_I830 is not set +CONFIG_DRM_I915=y +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_SIS is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_VESA is not set +CONFIG_FB_EFI=y +# CONFIG_FB_IMAC is not set +# CONFIG_FB_N411 is not set +# CONFIG_FB_HGA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_LE80578 is not set +# CONFIG_FB_INTEL is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_GEODE is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set +# CONFIG_BACKLIGHT_PROGEAR is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y -CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256 +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y # # Sound @@ -958,33 +1465,165 @@ CONFIG_SOUND=y # # Advanced Linux Sound Architecture # -# CONFIG_SND is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_SEQ_DUMMY=y +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y + +# +# Generic devices +# +# CONFIG_SND_PCSP is not set +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +CONFIG_SND_HDA_INTEL=y +CONFIG_SND_HDA_HWDEP=y +CONFIG_SND_HDA_CODEC_REALTEK=y +CONFIG_SND_HDA_CODEC_ANALOG=y +CONFIG_SND_HDA_CODEC_SIGMATEL=y +CONFIG_SND_HDA_CODEC_VIA=y +CONFIG_SND_HDA_CODEC_ATIHDMI=y +CONFIG_SND_HDA_CODEC_CONEXANT=y +CONFIG_SND_HDA_CODEC_CMEDIA=y +CONFIG_SND_HDA_CODEC_SI3054=y +CONFIG_SND_HDA_GENERIC=y +# CONFIG_SND_HDA_POWER_SAVE is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# ALSA SoC audio for Freescale SOCs +# + +# +# SoC Audio for the Texas Instruments OMAP +# # # Open Sound System # -CONFIG_SOUND_PRIME=y -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_OSS is not set +# CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set +CONFIG_HID_DEBUG=y +CONFIG_HIDRAW=y # # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set +CONFIG_USB_HIDINPUT_POWERBOOK=y +CONFIG_HID_FF=y +CONFIG_HID_PID=y +CONFIG_LOGITECH_FF=y +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_PANTHERLORD_FF=y +CONFIG_THRUSTMASTER_FF=y +CONFIG_ZEROPLUS_FF=y +CONFIG_USB_HIDDEV=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y -# CONFIG_USB_DEBUG is not set +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options @@ -992,18 +1631,18 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set +CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1036,8 +1675,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_LIBUSUAL=y # # USB Imaging devices @@ -1049,10 +1690,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1078,98 +1715,126 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y # -# USB DSL modem support +# LED drivers # +# CONFIG_LEDS_CLEVO_MAIL is not set # -# USB Gadget Support +# LED Triggers # -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_EDAC=y # -# LED devices +# Reporting subsystems # -# CONFIG_NEW_LEDS is not set +# CONFIG_EDAC_DEBUG is not set +# CONFIG_EDAC_MM_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set # -# LED drivers +# RTC interfaces # +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# LED Triggers +# I2C RTC drivers # -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # -# Real Time Clock +# SPI RTC drivers # -# CONFIG_RTC_CLASS is not set # -# DMA Engine support +# Platform RTC drivers # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# DMA Clients +# on-CPU RTC drivers # +CONFIG_DMADEVICES=y # # DMA Devices # -CONFIG_VIRTUALIZATION=y -# CONFIG_KVM is not set - -# -# Userspace I/O -# +# CONFIG_INTEL_IOATDMA is not set # CONFIG_UIO is not set # # Firmware Drivers # # CONFIG_EDD is not set +CONFIG_EFI_VARS=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y +# CONFIG_ISCSI_IBFT_FIND is not set # # File systems # -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y -# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -# CONFIG_REISERFS_FS_SECURITY is not set +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1180,7 +1845,7 @@ CONFIG_GENERIC_ACL=y # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set +CONFIG_ZISOFS=y # CONFIG_UDF_FS is not set # @@ -1198,13 +1863,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1212,6 +1877,7 @@ CONFIG_RAMFS=y # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -1219,33 +1885,15 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set @@ -1255,14 +1903,26 @@ CONFIG_SUNRPC=y # # Partition Types # -# CONFIG_PARTITION_ADVANCED is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_LDM_PARTITION is not set +CONFIG_SGI_PARTITION=y +# CONFIG_ULTRIX_PARTITION is not set +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set @@ -1297,40 +1957,33 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Instrumentation Support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_KPROBES=y - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set +CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y -# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1344,28 +1997,162 @@ CONFIG_TIMER_STATS=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set -# CONFIG_FRAME_POINTER is not set -CONFIG_OPTIMIZE_INLINING=y +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set -# CONFIG_DEBUG_RODATA is not set -# CONFIG_IOMMU_DEBUG is not set +# CONFIG_LATENCYTOP is not set +CONFIG_PROVIDE_OHCI1394_DMA_INIT=y +# CONFIG_SAMPLES is not set +# CONFIG_KGDB is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_NONPROMISC_DEVMEM is not set +CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUG_PER_CPU_MAPS is not set +# CONFIG_X86_PTDUMP is not set +CONFIG_DEBUG_RODATA=y +# CONFIG_DIRECT_GBPAGES is not set +# CONFIG_DEBUG_RODATA_TEST is not set +CONFIG_DEBUG_NX_TEST=m +CONFIG_X86_MPPARSE=y +# CONFIG_IOMMU_DEBUG is not set +CONFIG_IO_DELAY_TYPE_0X80=0 +CONFIG_IO_DELAY_TYPE_0XED=1 +CONFIG_IO_DELAY_TYPE_UDELAY=2 +CONFIG_IO_DELAY_TYPE_NONE=3 +CONFIG_IO_DELAY_0X80=y +# CONFIG_IO_DELAY_0XED is not set +# CONFIG_IO_DELAY_UDELAY is not set +# CONFIG_IO_DELAY_NONE is not set +CONFIG_DEFAULT_IO_DELAY_TYPE=0 +CONFIG_DEBUG_BOOT_PARAMS=y +# CONFIG_CPA_DEBUG is not set # # Security options # -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_CRYPTO is not set +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +# CONFIG_SECURITY_NETWORK_XFRM is not set +CONFIG_SECURITY_CAPABILITIES=y +CONFIG_SECURITY_FILE_CAPABILITIES=y +# CONFIG_SECURITY_ROOTPLUG is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536 +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set +# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set +# CONFIG_SECURITY_SMACK is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_AES_X86_64 is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SALSA20_X86_64 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_TWOFISH_X86_64 is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_HAVE_KVM=y +CONFIG_VIRTUALIZATION=y +# CONFIG_KVM is not set +# CONFIG_VIRTIO_PCI is not set +# CONFIG_VIRTIO_BALLOON is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index b5e329d..3aefbce 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -370,13 +370,11 @@ quiet_ni_syscall: PTREGSCALL stub32_rt_sigreturn, sys32_rt_sigreturn, %rdi PTREGSCALL stub32_sigreturn, sys32_sigreturn, %rdi PTREGSCALL stub32_sigaltstack, sys32_sigaltstack, %rdx - PTREGSCALL stub32_sigsuspend, sys32_sigsuspend, %rcx PTREGSCALL stub32_execve, sys32_execve, %rcx PTREGSCALL stub32_fork, sys_fork, %rdi PTREGSCALL stub32_clone, sys32_clone, %rdx PTREGSCALL stub32_vfork, sys_vfork, %rdi PTREGSCALL stub32_iopl, sys_iopl, %rsi - PTREGSCALL stub32_rt_sigsuspend, sys_rt_sigsuspend, %rdx ENTRY(ia32_ptregs_common) popq %r11 @@ -476,7 +474,7 @@ ia32_sys_call_table: .quad sys_ssetmask .quad sys_setreuid16 /* 70 */ .quad sys_setregid16 - .quad stub32_sigsuspend + .quad sys32_sigsuspend .quad compat_sys_sigpending .quad sys_sethostname .quad compat_sys_setrlimit /* 75 */ @@ -583,7 +581,7 @@ ia32_sys_call_table: .quad sys32_rt_sigpending .quad compat_sys_rt_sigtimedwait .quad sys32_rt_sigqueueinfo - .quad stub32_rt_sigsuspend + .quad sys_rt_sigsuspend .quad sys32_pread /* 180 */ .quad sys32_pwrite .quad sys_chown16 diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 77807d4..8a42b79 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -18,14 +18,13 @@ CFLAGS_tsc_64.o := $(nostackp) obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o obj-y += traps_$(BITS).o irq_$(BITS).o obj-y += time_$(BITS).o ioport.o ldt.o -obj-y += setup_$(BITS).o i8259_$(BITS).o setup.o +obj-y += setup_$(BITS).o i8259.o irqinit_$(BITS).o setup.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o obj-y += bootflag.o e820_$(BITS).o obj-y += pci-dma.o quirks.o i8237.o topology.o kdebugfs.o obj-y += alternative.o i8253.o pci-nommu.o -obj-$(CONFIG_X86_64) += bugs_64.o obj-y += tsc_$(BITS).o io_delay.o rtc.o obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 479926d..e819362 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -35,6 +35,18 @@ int fallback_aper_force __initdata; int fix_aperture __initdata = 1; +struct bus_dev_range { + int bus; + int dev_base; + int dev_limit; +}; + +static struct bus_dev_range bus_dev_ranges[] __initdata = { + { 0x00, 0x18, 0x20}, + { 0xff, 0x00, 0x20}, + { 0xfe, 0x00, 0x20} +}; + static struct resource gart_resource = { .name = "GART", .flags = IORESOURCE_MEM, @@ -55,8 +67,9 @@ static u32 __init allocate_aperture(void) u32 aper_size; void *p; - if (fallback_aper_order > 7) - fallback_aper_order = 7; + /* aper_size should <= 1G */ + if (fallback_aper_order > 5) + fallback_aper_order = 5; aper_size = (32 * 1024 * 1024) << fallback_aper_order; /* @@ -65,7 +78,20 @@ static u32 __init allocate_aperture(void) * memory. Unfortunately we cannot move it up because that would * make the IOMMU useless. */ - p = __alloc_bootmem_nopanic(aper_size, aper_size, 0); + /* + * using 512M as goal, in case kexec will load kernel_big + * that will do the on position decompress, and could overlap with + * that positon with gart that is used. + * sequende: + * kernel_small + * ==> kexec (with kdump trigger path or previous doesn't shutdown gart) + * ==> kernel_small(gart area become e820_reserved) + * ==> kexec (with kdump trigger path or previous doesn't shutdown gart) + * ==> kerne_big (uncompressed size will be big than 64M or 128M) + * so don't use 512M below as gart iommu, leave the space for kernel + * code for safe + */ + p = __alloc_bootmem_nopanic(aper_size, aper_size, 512ULL<<20); if (!p || __pa(p)+aper_size > 0xffffffff) { printk(KERN_ERR "Cannot allocate aperture memory hole (%p,%uK)\n", @@ -83,69 +109,53 @@ static u32 __init allocate_aperture(void) return (u32)__pa(p); } -static int __init aperture_valid(u64 aper_base, u32 aper_size) -{ - if (!aper_base) - return 0; - - if (aper_base + aper_size > 0x100000000UL) { - printk(KERN_ERR "Aperture beyond 4GB. Ignoring.\n"); - return 0; - } - if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) { - printk(KERN_ERR "Aperture pointing to e820 RAM. Ignoring.\n"); - return 0; - } - if (aper_size < 64*1024*1024) { - printk(KERN_ERR "Aperture too small (%d MB)\n", aper_size>>20); - return 0; - } - - return 1; -} /* Find a PCI capability */ -static __u32 __init find_cap(int num, int slot, int func, int cap) +static u32 __init find_cap(int bus, int slot, int func, int cap) { int bytes; u8 pos; - if (!(read_pci_config_16(num, slot, func, PCI_STATUS) & + if (!(read_pci_config_16(bus, slot, func, PCI_STATUS) & PCI_STATUS_CAP_LIST)) return 0; - pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST); + pos = read_pci_config_byte(bus, slot, func, PCI_CAPABILITY_LIST); for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { u8 id; pos &= ~3; - id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID); + id = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_ID); if (id == 0xff) break; if (id == cap) return pos; - pos = read_pci_config_byte(num, slot, func, + pos = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_NEXT); } return 0; } /* Read a standard AGPv3 bridge header */ -static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) +static u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order) { u32 apsize; u32 apsizereg; int nbits; u32 aper_low, aper_hi; u64 aper; + u32 old_order; - printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", num, slot, func); - apsizereg = read_pci_config_16(num, slot, func, cap + 0x14); + printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", bus, slot, func); + apsizereg = read_pci_config_16(bus, slot, func, cap + 0x14); if (apsizereg == 0xffffffff) { printk(KERN_ERR "APSIZE in AGP bridge unreadable\n"); return 0; } + /* old_order could be the value from NB gart setting */ + old_order = *order; + apsize = apsizereg & 0xfff; /* Some BIOS use weird encodings not in the AGPv3 table. */ if (apsize & 0xff) @@ -155,14 +165,26 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) if ((int)*order < 0) /* < 32MB */ *order = 0; - aper_low = read_pci_config(num, slot, func, 0x10); - aper_hi = read_pci_config(num, slot, func, 0x14); + aper_low = read_pci_config(bus, slot, func, 0x10); + aper_hi = read_pci_config(bus, slot, func, 0x14); aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32); + /* + * On some sick chips, APSIZE is 0. It means it wants 4G + * so let double check that order, and lets trust AMD NB settings: + */ + printk(KERN_INFO "Aperture from AGP @ %Lx old size %u MB\n", + aper, 32 << old_order); + if (aper + (32ULL<<(20 + *order)) > 0x100000000ULL) { + printk(KERN_INFO "Aperture size %u MB (APSIZE %x) is not right, using settings from NB\n", + 32 << *order, apsizereg); + *order = old_order; + } + printk(KERN_INFO "Aperture from AGP @ %Lx size %u MB (APSIZE %x)\n", aper, 32 << *order, apsizereg); - if (!aperture_valid(aper, (32*1024*1024) << *order)) + if (!aperture_valid(aper, (32*1024*1024) << *order, 32<<20)) return 0; return (u32)aper; } @@ -180,17 +202,17 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) * the AGP bridges should be always an own bus on the HT hierarchy, * but do it here for future safety. */ -static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) +static u32 __init search_agp_bridge(u32 *order, int *valid_agp) { - int num, slot, func; + int bus, slot, func; /* Poor man's PCI discovery */ - for (num = 0; num < 256; num++) { + for (bus = 0; bus < 256; bus++) { for (slot = 0; slot < 32; slot++) { for (func = 0; func < 8; func++) { u32 class, cap; u8 type; - class = read_pci_config(num, slot, func, + class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION); if (class == 0xffffffff) break; @@ -199,17 +221,17 @@ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) case PCI_CLASS_BRIDGE_HOST: case PCI_CLASS_BRIDGE_OTHER: /* needed? */ /* AGP bridge? */ - cap = find_cap(num, slot, func, + cap = find_cap(bus, slot, func, PCI_CAP_ID_AGP); if (!cap) break; *valid_agp = 1; - return read_agp(num, slot, func, cap, + return read_agp(bus, slot, func, cap, order); } /* No multi-function device? */ - type = read_pci_config_byte(num, slot, func, + type = read_pci_config_byte(bus, slot, func, PCI_HEADER_TYPE); if (!(type & 0x80)) break; @@ -249,36 +271,50 @@ void __init early_gart_iommu_check(void) * or BIOS forget to put that in reserved. * try to update e820 to make that region as reserved. */ - int fix, num; + int i, fix, slot; u32 ctl; u32 aper_size = 0, aper_order = 0, last_aper_order = 0; u64 aper_base = 0, last_aper_base = 0; - int aper_enabled = 0, last_aper_enabled = 0; + int aper_enabled = 0, last_aper_enabled = 0, last_valid = 0; if (!early_pci_allowed()) return; + /* This is mostly duplicate of iommu_hole_init */ fix = 0; - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; - - ctl = read_pci_config(0, num, 3, 0x90); - aper_enabled = ctl & 1; - aper_order = (ctl >> 1) & 7; - aper_size = (32 * 1024 * 1024) << aper_order; - aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff; - aper_base <<= 25; - - if ((last_aper_order && aper_order != last_aper_order) || - (last_aper_base && aper_base != last_aper_base) || - (last_aper_enabled && aper_enabled != last_aper_enabled)) { - fix = 1; - break; + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL); + aper_enabled = ctl & AMD64_GARTEN; + aper_order = (ctl >> 1) & 7; + aper_size = (32 * 1024 * 1024) << aper_order; + aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff; + aper_base <<= 25; + + if (last_valid) { + if ((aper_order != last_aper_order) || + (aper_base != last_aper_base) || + (aper_enabled != last_aper_enabled)) { + fix = 1; + break; + } + } + + last_aper_order = aper_order; + last_aper_base = aper_base; + last_aper_enabled = aper_enabled; + last_valid = 1; } - last_aper_order = aper_order; - last_aper_base = aper_base; - last_aper_enabled = aper_enabled; } if (!fix && !aper_enabled) @@ -290,32 +326,46 @@ void __init early_gart_iommu_check(void) if (gart_fix_e820 && !fix && aper_enabled) { if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) { - /* reserved it, so we can resuse it in second kernel */ + /* reserve it, so we can reuse it in second kernel */ printk(KERN_INFO "update e820 for GART\n"); add_memory_region(aper_base, aper_size, E820_RESERVED); update_e820(); } - return; } + if (!fix) + return; + /* different nodes have different setting, disable them all at first*/ - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; - ctl = read_pci_config(0, num, 3, 0x90); - ctl &= ~1; - write_pci_config(0, num, 3, 0x90, ctl); + ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL); + ctl &= ~AMD64_GARTEN; + write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, ctl); + } } } +static int __initdata printed_gart_size_msg; + void __init gart_iommu_hole_init(void) { + u32 agp_aper_base = 0, agp_aper_order = 0; u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0; u64 aper_base, last_aper_base = 0; - int fix, num, valid_agp = 0; - int node; + int fix, slot, valid_agp = 0; + int i, node; if (gart_iommu_aperture_disabled || !fix_aperture || !early_pci_allowed()) @@ -323,38 +373,63 @@ void __init gart_iommu_hole_init(void) printk(KERN_INFO "Checking aperture...\n"); + if (!fallback_aper_force) + agp_aper_base = search_agp_bridge(&agp_aper_order, &valid_agp); + fix = 0; node = 0; - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; - - iommu_detected = 1; - gart_iommu_aperture = 1; - - aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7; - aper_size = (32 * 1024 * 1024) << aper_order; - aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff; - aper_base <<= 25; - - printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n", - node, aper_base, aper_size >> 20); - node++; - - if (!aperture_valid(aper_base, aper_size)) { - fix = 1; - break; - } + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + iommu_detected = 1; + gart_iommu_aperture = 1; + + aper_order = (read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL) >> 1) & 7; + aper_size = (32 * 1024 * 1024) << aper_order; + aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff; + aper_base <<= 25; + + printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n", + node, aper_base, aper_size >> 20); + node++; + + if (!aperture_valid(aper_base, aper_size, 64<<20)) { + if (valid_agp && agp_aper_base && + agp_aper_base == aper_base && + agp_aper_order == aper_order) { + /* the same between two setting from NB and agp */ + if (!no_iommu && end_pfn > MAX_DMA32_PFN && !printed_gart_size_msg) { + printk(KERN_ERR "you are using iommu with agp, but GART size is less than 64M\n"); + printk(KERN_ERR "please increase GART size in your BIOS setup\n"); + printk(KERN_ERR "if BIOS doesn't have that option, contact your HW vendor!\n"); + printed_gart_size_msg = 1; + } + } else { + fix = 1; + goto out; + } + } - if ((last_aper_order && aper_order != last_aper_order) || - (last_aper_base && aper_base != last_aper_base)) { - fix = 1; - break; + if ((last_aper_order && aper_order != last_aper_order) || + (last_aper_base && aper_base != last_aper_base)) { + fix = 1; + goto out; + } + last_aper_order = aper_order; + last_aper_base = aper_base; } - last_aper_order = aper_order; - last_aper_base = aper_base; } +out: if (!fix && !fallback_aper_force) { if (last_aper_base) { unsigned long n = (32 * 1024 * 1024) << last_aper_order; @@ -364,8 +439,10 @@ void __init gart_iommu_hole_init(void) return; } - if (!fallback_aper_force) - aper_alloc = search_agp_bridge(&aper_order, &valid_agp); + if (!fallback_aper_force) { + aper_alloc = agp_aper_base; + aper_order = agp_aper_order; + } if (aper_alloc) { /* Got the aperture from the AGP bridge */ @@ -401,16 +478,24 @@ void __init gart_iommu_hole_init(void) } /* Fix up the north bridges */ - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; - - /* - * Don't enable translation yet. That is done later. - * Assume this BIOS didn't initialise the GART so - * just overwrite all previous bits - */ - write_pci_config(0, num, 3, 0x90, aper_order<<1); - write_pci_config(0, num, 3, 0x94, aper_alloc>>25); + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + /* Don't enable translation yet. That is done later. + Assume this BIOS didn't initialise the GART so + just overwrite all previous bits */ + write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, aper_order << 1); + write_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE, aper_alloc >> 25); + } } + + set_up_gart_resume(aper_order, aper_alloc); } diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 4b99b1b..45d8da4 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -64,9 +64,8 @@ static int enable_local_apic __initdata; /* Local APIC timer verification ok */ static int local_apic_timer_verify_ok; -/* Disable local APIC timer from the kernel commandline or via dmi quirk - or using CPU MSR check */ -int local_apic_timer_disabled; +/* Disable local APIC timer from the kernel commandline or via dmi quirk */ +static int local_apic_timer_disabled; /* Local APIC timer works in C2 */ int local_apic_timer_c2_ok; EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); @@ -1154,9 +1153,6 @@ static int __init detect_init_APIC(void) if (l & MSR_IA32_APICBASE_ENABLE) mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; - if (nmi_watchdog != NMI_NONE && nmi_watchdog != NMI_DISABLED) - nmi_watchdog = NMI_LOCAL_APIC; - printk(KERN_INFO "Found and enabled local APIC!\n"); apic_pm_activate(); @@ -1269,6 +1265,10 @@ int __init APIC_init_uniprocessor(void) setup_local_APIC(); +#ifdef CONFIG_X86_IO_APIC + if (!smp_found_config || skip_ioapic_setup || !nr_ioapics) +#endif + localise_nmi_watchdog(); end_local_APIC_setup(); #ifdef CONFIG_X86_IO_APIC if (smp_found_config) diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 0633cfd..3ef7752 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -43,7 +43,7 @@ #include <mach_ipi.h> #include <mach_apic.h> -int disable_apic_timer __cpuinitdata; +static int disable_apic_timer __cpuinitdata; static int apic_calibrate_pmtmr __initdata; int disable_apic; @@ -422,32 +422,8 @@ void __init setup_boot_APIC_clock(void) setup_APIC_timer(); } -/* - * AMD C1E enabled CPUs have a real nasty problem: Some BIOSes set the - * C1E flag only in the secondary CPU, so when we detect the wreckage - * we already have enabled the boot CPU local apic timer. Check, if - * disable_apic_timer is set and the DUMMY flag is cleared. If yes, - * set the DUMMY flag again and force the broadcast mode in the - * clockevents layer. - */ -static void __cpuinit check_boot_apic_timer_broadcast(void) -{ - if (!disable_apic_timer || - (lapic_clockevent.features & CLOCK_EVT_FEAT_DUMMY)) - return; - - printk(KERN_INFO "AMD C1E detected late. Force timer broadcast.\n"); - lapic_clockevent.features |= CLOCK_EVT_FEAT_DUMMY; - - local_irq_enable(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE, - &boot_cpu_physical_apicid); - local_irq_disable(); -} - void __cpuinit setup_secondary_APIC_clock(void) { - check_boot_apic_timer_broadcast(); setup_APIC_timer(); } @@ -875,7 +851,7 @@ static int __init detect_init_APIC(void) void __init early_init_lapic_mapping(void) { - unsigned long apic_phys; + unsigned long phys_addr; /* * If no local APIC can be found then go out @@ -884,11 +860,11 @@ void __init early_init_lapic_mapping(void) if (!smp_found_config) return; - apic_phys = mp_lapic_addr; + phys_addr = mp_lapic_addr; - set_fixmap_nocache(FIX_APIC_BASE, apic_phys); + set_fixmap_nocache(FIX_APIC_BASE, phys_addr); apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n", - APIC_BASE, apic_phys); + APIC_BASE, phys_addr); /* * Fetch the APIC ID of the BSP in case we have a @@ -954,6 +930,8 @@ int __init APIC_init_uniprocessor(void) if (!skip_ioapic_setup && nr_ioapics) enable_IO_APIC(); + if (!smp_found_config || skip_ioapic_setup || !nr_ioapics) + localise_nmi_watchdog(); end_local_APIC_setup(); if (smp_found_config && !skip_ioapic_setup && nr_ioapics) diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index bf9290e..00e6d13 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -228,6 +228,7 @@ #include <linux/suspend.h> #include <linux/kthread.h> #include <linux/jiffies.h> +#include <linux/smp_lock.h> #include <asm/system.h> #include <asm/uaccess.h> @@ -1149,7 +1150,7 @@ static void queue_event(apm_event_t event, struct apm_user *sender) as->event_tail = 0; } as->events[as->event_head] = event; - if ((!as->suser) || (!as->writer)) + if (!as->suser || !as->writer) continue; switch (event) { case APM_SYS_SUSPEND: @@ -1396,7 +1397,7 @@ static void apm_mainloop(void) static int check_apm_user(struct apm_user *as, const char *func) { - if ((as == NULL) || (as->magic != APM_BIOS_MAGIC)) { + if (as == NULL || as->magic != APM_BIOS_MAGIC) { printk(KERN_ERR "apm: %s passed bad filp\n", func); return 1; } @@ -1459,18 +1460,19 @@ static unsigned int do_poll(struct file *fp, poll_table *wait) return 0; } -static int do_ioctl(struct inode *inode, struct file *filp, - u_int cmd, u_long arg) +static long do_ioctl(struct file *filp, u_int cmd, u_long arg) { struct apm_user *as; + int ret; as = filp->private_data; if (check_apm_user(as, "ioctl")) return -EIO; - if ((!as->suser) || (!as->writer)) + if (!as->suser || !as->writer) return -EPERM; switch (cmd) { case APM_IOC_STANDBY: + lock_kernel(); if (as->standbys_read > 0) { as->standbys_read--; as->standbys_pending--; @@ -1479,8 +1481,10 @@ static int do_ioctl(struct inode *inode, struct file *filp, queue_event(APM_USER_STANDBY, as); if (standbys_pending <= 0) standby(); + unlock_kernel(); break; case APM_IOC_SUSPEND: + lock_kernel(); if (as->suspends_read > 0) { as->suspends_read--; as->suspends_pending--; @@ -1488,16 +1492,17 @@ static int do_ioctl(struct inode *inode, struct file *filp, } else queue_event(APM_USER_SUSPEND, as); if (suspends_pending <= 0) { - return suspend(1); + ret = suspend(1); } else { as->suspend_wait = 1; wait_event_interruptible(apm_suspend_waitqueue, as->suspend_wait == 0); - return as->suspend_result; + ret = as->suspend_result; } - break; + unlock_kernel(); + return ret; default: - return -EINVAL; + return -ENOTTY; } return 0; } @@ -1860,7 +1865,7 @@ static const struct file_operations apm_bios_fops = { .owner = THIS_MODULE, .read = do_read, .poll = do_poll, - .ioctl = do_ioctl, + .unlocked_ioctl = do_ioctl, .open = do_open, .release = do_release, }; diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index a0c6f81..65b1be5 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -6,11 +6,15 @@ obj-y := intel_cacheinfo.o addon_cpuid_features.o obj-y += proc.o feature_names.o obj-$(CONFIG_X86_32) += common.o bugs.o +obj-$(CONFIG_X86_64) += bugs_64.o obj-$(CONFIG_X86_32) += amd.o +obj-$(CONFIG_X86_64) += amd_64.o obj-$(CONFIG_X86_32) += cyrix.o obj-$(CONFIG_X86_32) += centaur.o +obj-$(CONFIG_X86_64) += centaur_64.o obj-$(CONFIG_X86_32) += transmeta.o obj-$(CONFIG_X86_32) += intel.o +obj-$(CONFIG_X86_64) += intel_64.o obj-$(CONFIG_X86_32) += umc.o obj-$(CONFIG_X86_MCE) += mcheck/ diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c index c2e1ce3..84a8220 100644 --- a/arch/x86/kernel/cpu/addon_cpuid_features.c +++ b/arch/x86/kernel/cpu/addon_cpuid_features.c @@ -1,9 +1,7 @@ - /* * Routines to indentify additional cpu features that are scattered in * cpuid space. */ - #include <linux/cpu.h> #include <asm/pat.h> @@ -53,19 +51,20 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c) #ifdef CONFIG_X86_PAT void __cpuinit validate_pat_support(struct cpuinfo_x86 *c) { + if (!cpu_has_pat) + pat_disable("PAT not supported by CPU."); + switch (c->x86_vendor) { - case X86_VENDOR_AMD: - if (c->x86 >= 0xf && c->x86 <= 0x11) - return; - break; case X86_VENDOR_INTEL: if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15)) return; break; + case X86_VENDOR_AMD: + case X86_VENDOR_CENTAUR: + case X86_VENDOR_TRANSMETA: + return; } - pat_disable(cpu_has_pat ? - "PAT disabled. Not yet verified on this CPU type." : - "PAT not supported by CPU."); + pat_disable("PAT disabled. Not yet verified on this CPU type."); } #endif diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 2458668..81a07ca 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -24,43 +24,6 @@ extern void vide(void); __asm__(".align 4\nvide: ret"); -#ifdef CONFIG_X86_LOCAL_APIC -#define ENABLE_C1E_MASK 0x18000000 -#define CPUID_PROCESSOR_SIGNATURE 1 -#define CPUID_XFAM 0x0ff00000 -#define CPUID_XFAM_K8 0x00000000 -#define CPUID_XFAM_10H 0x00100000 -#define CPUID_XFAM_11H 0x00200000 -#define CPUID_XMOD 0x000f0000 -#define CPUID_XMOD_REV_F 0x00040000 - -/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */ -static __cpuinit int amd_apic_timer_broken(void) -{ - u32 lo, hi; - u32 eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - switch (eax & CPUID_XFAM) { - case CPUID_XFAM_K8: - if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F) - break; - case CPUID_XFAM_10H: - case CPUID_XFAM_11H: - rdmsr(MSR_K8_ENABLE_C1E, lo, hi); - if (lo & ENABLE_C1E_MASK) { - if (smp_processor_id() != boot_cpu_physical_apicid) - printk(KERN_INFO "AMD C1E detected late. " - " Force timer broadcast.\n"); - return 1; - } - break; - default: - /* err on the side of caution */ - return 1; - } - return 0; -} -#endif - int force_mwait __cpuinitdata; static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) @@ -297,11 +260,6 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) num_cache_leaves = 3; } -#ifdef CONFIG_X86_LOCAL_APIC - if (amd_apic_timer_broken()) - local_apic_timer_disabled = 1; -#endif - /* K6s reports MCEs but don't actually have all the MSRs */ if (c->x86 < 6) clear_cpu_cap(c, X86_FEATURE_MCE); diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c new file mode 100644 index 0000000..30b7557 --- /dev/null +++ b/arch/x86/kernel/cpu/amd_64.c @@ -0,0 +1,211 @@ +#include <linux/init.h> +#include <linux/mm.h> + +#include <asm/numa_64.h> +#include <asm/mmconfig.h> +#include <asm/cacheflush.h> + +#include <mach_apic.h> + +#include "cpu.h" + +int force_mwait __cpuinitdata; + +#ifdef CONFIG_NUMA +static int __cpuinit nearby_node(int apicid) +{ + int i, node; + + for (i = apicid - 1; i >= 0; i--) { + node = apicid_to_node[i]; + if (node != NUMA_NO_NODE && node_online(node)) + return node; + } + for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { + node = apicid_to_node[i]; + if (node != NUMA_NO_NODE && node_online(node)) + return node; + } + return first_node(node_online_map); /* Shouldn't happen */ +} +#endif + +/* + * On a AMD dual core setup the lower bits of the APIC id distingush the cores. + * Assumes number of cores is a power of two. + */ +static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_SMP + unsigned bits; +#ifdef CONFIG_NUMA + int cpu = smp_processor_id(); + int node = 0; + unsigned apicid = hard_smp_processor_id(); +#endif + bits = c->x86_coreid_bits; + + /* Low order bits define the core id (index of core in socket) */ + c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); + /* Convert the initial APIC ID into the socket ID */ + c->phys_proc_id = c->initial_apicid >> bits; + +#ifdef CONFIG_NUMA + node = c->phys_proc_id; + if (apicid_to_node[apicid] != NUMA_NO_NODE) + node = apicid_to_node[apicid]; + if (!node_online(node)) { + /* Two possibilities here: + - The CPU is missing memory and no node was created. + In that case try picking one from a nearby CPU + - The APIC IDs differ from the HyperTransport node IDs + which the K8 northbridge parsing fills in. + Assume they are all increased by a constant offset, + but in the same order as the HT nodeids. + If that doesn't result in a usable node fall back to the + path for the previous case. */ + + int ht_nodeid = c->initial_apicid; + + if (ht_nodeid >= 0 && + apicid_to_node[ht_nodeid] != NUMA_NO_NODE) + node = apicid_to_node[ht_nodeid]; + /* Pick a nearby node */ + if (!node_online(node)) + node = nearby_node(apicid); + } + numa_set_node(cpu, node); + + printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); +#endif +#endif +} + +static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_SMP + unsigned bits, ecx; + + /* Multi core CPU? */ + if (c->extended_cpuid_level < 0x80000008) + return; + + ecx = cpuid_ecx(0x80000008); + + c->x86_max_cores = (ecx & 0xff) + 1; + + /* CPU telling us the core id bits shift? */ + bits = (ecx >> 12) & 0xF; + + /* Otherwise recompute */ + if (bits == 0) { + while ((1 << bits) < c->x86_max_cores) + bits++; + } + + c->x86_coreid_bits = bits; + +#endif +} + +static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) +{ + early_init_amd_mc(c); + + /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */ + if (c->x86_power & (1<<8)) + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); +} + +static void __cpuinit init_amd(struct cpuinfo_x86 *c) +{ + unsigned level; + +#ifdef CONFIG_SMP + unsigned long value; + + /* + * Disable TLB flush filter by setting HWCR.FFDIS on K8 + * bit 6 of msr C001_0015 + * + * Errata 63 for SH-B3 steppings + * Errata 122 for all steppings (F+ have it disabled by default) + */ + if (c->x86 == 15) { + rdmsrl(MSR_K8_HWCR, value); + value |= 1 << 6; + wrmsrl(MSR_K8_HWCR, value); + } +#endif + + /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; + 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ + clear_cpu_cap(c, 0*32+31); + + /* On C+ stepping K8 rep microcode works well for copy/memset */ + level = cpuid_eax(1); + if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) || + level >= 0x0f58)) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + if (c->x86 == 0x10 || c->x86 == 0x11) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + + /* Enable workaround for FXSAVE leak */ + if (c->x86 >= 6) + set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK); + + level = get_model_name(c); + if (!level) { + switch (c->x86) { + case 15: + /* Should distinguish Models here, but this is only + a fallback anyways. */ + strcpy(c->x86_model_id, "Hammer"); + break; + } + } + display_cacheinfo(c); + + /* Multi core CPU? */ + if (c->extended_cpuid_level >= 0x80000008) + amd_detect_cmp(c); + + if (c->extended_cpuid_level >= 0x80000006 && + (cpuid_edx(0x80000006) & 0xf000)) + num_cache_leaves = 4; + else + num_cache_leaves = 3; + + if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x11) + set_cpu_cap(c, X86_FEATURE_K8); + + /* MFENCE stops RDTSC speculation */ + set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); + + if (c->x86 == 0x10) + fam10h_check_enable_mmcfg(); + + if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { + unsigned long long tseg; + + /* + * Split up direct mapping around the TSEG SMM area. + * Don't do it for gbpages because there seems very little + * benefit in doing so. + */ + if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg) && + (tseg >> PMD_SHIFT) < + (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT))) + set_memory_4k((unsigned long)__va(tseg), 1); + } +} + +static struct cpu_dev amd_cpu_dev __cpuinitdata = { + .c_vendor = "AMD", + .c_ident = { "AuthenticAMD" }, + .c_early_init = early_init_amd, + .c_init = init_amd, +}; + +cpu_vendor_dev_register(X86_VENDOR_AMD, &amd_cpu_dev); + diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index 170d2f5..1b1c56b 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -59,8 +59,12 @@ static void __init check_fpu(void) return; } -/* trap_init() enabled FXSR and company _before_ testing for FP problems here. */ - /* Test for the divl bug.. */ + /* + * trap_init() enabled FXSR and company _before_ testing for FP + * problems here. + * + * Test for the divl bug.. + */ __asm__("fninit\n\t" "fldl %1\n\t" "fdivl %2\n\t" @@ -108,10 +112,15 @@ static void __init check_popad(void) "movl $12345678,%%eax; movl $0,%%edi; pusha; popa; movl (%%edx,%%edi),%%ecx " : "=&a" (res) : "d" (inp) - : "ecx", "edi" ); - /* If this fails, it means that any user program may lock the CPU hard. Too bad. */ - if (res != 12345678) printk( "Buggy.\n" ); - else printk( "OK.\n" ); + : "ecx", "edi"); + /* + * If this fails, it means that any user program may lock the + * CPU hard. Too bad. + */ + if (res != 12345678) + printk("Buggy.\n"); + else + printk("OK.\n"); #endif } @@ -137,7 +146,8 @@ static void __init check_config(void) * i486+ only features! (WP works in supervisor mode and the * new "invlpg" and "bswap" instructions) */ -#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_BSWAP) +#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || \ + defined(CONFIG_X86_BSWAP) if (boot_cpu_data.x86 == 3) panic("Kernel requires i486+ for 'invlpg' and other features"); #endif @@ -170,6 +180,7 @@ void __init check_bugs(void) check_fpu(); check_hlt(); check_popad(); - init_utsname()->machine[1] = '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86); + init_utsname()->machine[1] = + '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86); alternative_instructions(); } diff --git a/arch/x86/kernel/bugs_64.c b/arch/x86/kernel/cpu/bugs_64.c index 9a3ed06..9a3ed06 100644 --- a/arch/x86/kernel/bugs_64.c +++ b/arch/x86/kernel/cpu/bugs_64.c diff --git a/arch/x86/kernel/cpu/centaur_64.c b/arch/x86/kernel/cpu/centaur_64.c new file mode 100644 index 0000000..13526fd --- /dev/null +++ b/arch/x86/kernel/cpu/centaur_64.c @@ -0,0 +1,43 @@ +#include <linux/init.h> +#include <linux/smp.h> + +#include <asm/cpufeature.h> +#include <asm/processor.h> + +#include "cpu.h" + +static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) +{ + if (c->x86 == 0x6 && c->x86_model >= 0xf) + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); +} + +static void __cpuinit init_centaur(struct cpuinfo_x86 *c) +{ + /* Cache sizes */ + unsigned n; + + n = c->extended_cpuid_level; + if (n >= 0x80000008) { + unsigned eax = cpuid_eax(0x80000008); + c->x86_virt_bits = (eax >> 8) & 0xff; + c->x86_phys_bits = eax & 0xff; + } + + if (c->x86 == 0x6 && c->x86_model >= 0xf) { + c->x86_cache_alignment = c->x86_clflush_size * 2; + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + } + set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); +} + +static struct cpu_dev centaur_cpu_dev __cpuinitdata = { + .c_vendor = "Centaur", + .c_ident = { "CentaurHauls" }, + .c_early_init = early_init_centaur, + .c_init = init_centaur, +}; + +cpu_vendor_dev_register(X86_VENDOR_CENTAUR, ¢aur_cpu_dev); + diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h index 783691b..4d894e8 100644 --- a/arch/x86/kernel/cpu/cpu.h +++ b/arch/x86/kernel/cpu/cpu.h @@ -1,3 +1,6 @@ +#ifndef ARCH_X86_CPU_H + +#define ARCH_X86_CPU_H struct cpu_model_info { int vendor; @@ -36,3 +39,5 @@ extern struct cpu_vendor_dev __x86cpuvendor_start[], __x86cpuvendor_end[]; extern int get_model_name(struct cpuinfo_x86 *c); extern void display_cacheinfo(struct cpuinfo_x86 *c); + +#endif diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c index f03e9153..965ea52 100644 --- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c +++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c @@ -26,9 +26,10 @@ #define NFORCE2_SAFE_DISTANCE 50 /* Delay in ms between FSB changes */ -//#define NFORCE2_DELAY 10 +/* #define NFORCE2_DELAY 10 */ -/* nforce2_chipset: +/* + * nforce2_chipset: * FSB is changed using the chipset */ static struct pci_dev *nforce2_chipset_dev; @@ -36,13 +37,13 @@ static struct pci_dev *nforce2_chipset_dev; /* fid: * multiplier * 10 */ -static int fid = 0; +static int fid; /* min_fsb, max_fsb: * minimum and maximum FSB (= FSB at boot time) */ -static int min_fsb = 0; -static int max_fsb = 0; +static int min_fsb; +static int max_fsb; MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>"); MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver"); @@ -53,7 +54,7 @@ module_param(min_fsb, int, 0444); MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)"); MODULE_PARM_DESC(min_fsb, - "Minimum FSB to use, if not defined: current FSB - 50"); + "Minimum FSB to use, if not defined: current FSB - 50"); #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg) @@ -139,7 +140,7 @@ static unsigned int nforce2_fsb_read(int bootfsb) /* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */ nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, - 0x01EF,PCI_ANY_ID,PCI_ANY_ID,NULL); + 0x01EF, PCI_ANY_ID, PCI_ANY_ID, NULL); if (!nforce2_sub5) return 0; @@ -147,13 +148,13 @@ static unsigned int nforce2_fsb_read(int bootfsb) fsb /= 1000000; /* Check if PLL register is already set */ - pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp); + pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp); - if(bootfsb || !temp) + if (bootfsb || !temp) return fsb; - + /* Use PLL register FSB value */ - pci_read_config_dword(nforce2_chipset_dev,NFORCE2_PLLREG, &temp); + pci_read_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, &temp); fsb = nforce2_calc_fsb(temp); return fsb; @@ -184,7 +185,7 @@ static int nforce2_set_fsb(unsigned int fsb) } /* First write? Then set actual value */ - pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp); + pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp); if (!temp) { pll = nforce2_calc_pll(tfsb); @@ -210,7 +211,8 @@ static int nforce2_set_fsb(unsigned int fsb) tfsb--; /* Calculate the PLL reg. value */ - if ((pll = nforce2_calc_pll(tfsb)) == -1) + pll = nforce2_calc_pll(tfsb); + if (pll == -1) return -EINVAL; nforce2_write_pll(pll); @@ -249,7 +251,7 @@ static unsigned int nforce2_get(unsigned int cpu) static int nforce2_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { -// unsigned long flags; +/* unsigned long flags; */ struct cpufreq_freqs freqs; unsigned int target_fsb; @@ -271,17 +273,17 @@ static int nforce2_target(struct cpufreq_policy *policy, cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); /* Disable IRQs */ - //local_irq_save(flags); + /* local_irq_save(flags); */ if (nforce2_set_fsb(target_fsb) < 0) printk(KERN_ERR "cpufreq: Changing FSB to %d failed\n", - target_fsb); + target_fsb); else dprintk("Changed FSB successfully to %d\n", - target_fsb); + target_fsb); /* Enable IRQs */ - //local_irq_restore(flags); + /* local_irq_restore(flags); */ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); @@ -302,8 +304,8 @@ static int nforce2_verify(struct cpufreq_policy *policy) policy->max = (fsb_pol_max + 1) * fid * 100; cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); + policy->cpuinfo.min_freq, + policy->cpuinfo.max_freq); return 0; } @@ -347,7 +349,7 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy) /* Set maximum FSB to FSB at boot time */ max_fsb = nforce2_fsb_read(1); - if(!max_fsb) + if (!max_fsb) return -EIO; if (!min_fsb) diff --git a/arch/x86/kernel/cpu/intel_64.c b/arch/x86/kernel/cpu/intel_64.c new file mode 100644 index 0000000..fcb1cc9 --- /dev/null +++ b/arch/x86/kernel/cpu/intel_64.c @@ -0,0 +1,103 @@ +#include <linux/init.h> +#include <linux/smp.h> +#include <asm/processor.h> +#include <asm/ptrace.h> +#include <asm/topology.h> +#include <asm/numa_64.h> + +#include "cpu.h" + +static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) +{ + if ((c->x86 == 0xf && c->x86_model >= 0x03) || + (c->x86 == 0x6 && c->x86_model >= 0x0e)) + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); +} + +/* + * find out the number of processor cores on the die + */ +static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) +{ + unsigned int eax, t; + + if (c->cpuid_level < 4) + return 1; + + cpuid_count(4, 0, &eax, &t, &t, &t); + + if (eax & 0x1f) + return ((eax >> 26) + 1); + else + return 1; +} + +static void __cpuinit srat_detect_node(void) +{ +#ifdef CONFIG_NUMA + unsigned node; + int cpu = smp_processor_id(); + int apicid = hard_smp_processor_id(); + + /* Don't do the funky fallback heuristics the AMD version employs + for now. */ + node = apicid_to_node[apicid]; + if (node == NUMA_NO_NODE || !node_online(node)) + node = first_node(node_online_map); + numa_set_node(cpu, node); + + printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); +#endif +} + +static void __cpuinit init_intel(struct cpuinfo_x86 *c) +{ + /* Cache sizes */ + unsigned n; + + init_intel_cacheinfo(c); + if (c->cpuid_level > 9) { + unsigned eax = cpuid_eax(10); + /* Check for version and the number of counters */ + if ((eax & 0xff) && (((eax>>8) & 0xff) > 1)) + set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON); + } + + if (cpu_has_ds) { + unsigned int l1, l2; + rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); + if (!(l1 & (1<<11))) + set_cpu_cap(c, X86_FEATURE_BTS); + if (!(l1 & (1<<12))) + set_cpu_cap(c, X86_FEATURE_PEBS); + } + + + if (cpu_has_bts) + ds_init_intel(c); + + n = c->extended_cpuid_level; + if (n >= 0x80000008) { + unsigned eax = cpuid_eax(0x80000008); + c->x86_virt_bits = (eax >> 8) & 0xff; + c->x86_phys_bits = eax & 0xff; + } + + if (c->x86 == 15) + c->x86_cache_alignment = c->x86_clflush_size * 2; + if (c->x86 == 6) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); + c->x86_max_cores = intel_num_cpu_cores(c); + + srat_detect_node(); +} + +static struct cpu_dev intel_cpu_dev __cpuinitdata = { + .c_vendor = "Intel", + .c_ident = { "GenuineIntel" }, + .c_early_init = early_init_intel, + .c_init = init_intel, +}; +cpu_vendor_dev_register(X86_VENDOR_INTEL, &intel_cpu_dev); + diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 26d615d..2c8afaf 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -62,6 +62,7 @@ static struct _cache_table cache_table[] __cpuinitdata = { 0x4b, LVL_3, 8192 }, /* 16-way set assoc, 64 byte line size */ { 0x4c, LVL_3, 12288 }, /* 12-way set assoc, 64 byte line size */ { 0x4d, LVL_3, 16384 }, /* 16-way set assoc, 64 byte line size */ + { 0x4e, LVL_2, 6144 }, /* 24-way set assoc, 64 byte line size */ { 0x60, LVL_1_DATA, 16 }, /* 8-way set assoc, sectored cache, 64 byte line size */ { 0x66, LVL_1_DATA, 8 }, /* 4-way set assoc, sectored cache, 64 byte line size */ { 0x67, LVL_1_DATA, 16 }, /* 4-way set assoc, sectored cache, 64 byte line size */ diff --git a/arch/x86/kernel/cpu/mcheck/k7.c b/arch/x86/kernel/cpu/mcheck/k7.c index e633c9c..f390c9f 100644 --- a/arch/x86/kernel/cpu/mcheck/k7.c +++ b/arch/x86/kernel/cpu/mcheck/k7.c @@ -9,23 +9,23 @@ #include <linux/interrupt.h> #include <linux/smp.h> -#include <asm/processor.h> +#include <asm/processor.h> #include <asm/system.h> #include <asm/msr.h> #include "mce.h" /* Machine Check Handler For AMD Athlon/Duron */ -static void k7_machine_check(struct pt_regs * regs, long error_code) +static void k7_machine_check(struct pt_regs *regs, long error_code) { - int recover=1; + int recover = 1; u32 alow, ahigh, high, low; u32 mcgstl, mcgsth; int i; - rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth); + rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth); if (mcgstl & (1<<0)) /* Recoverable ? */ - recover=0; + recover = 0; printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n", smp_processor_id(), mcgsth, mcgstl); @@ -60,12 +60,12 @@ static void k7_machine_check(struct pt_regs * regs, long error_code) } if (recover&2) - panic ("CPU context corrupt"); + panic("CPU context corrupt"); if (recover&1) - panic ("Unable to continue"); - printk (KERN_EMERG "Attempting to continue.\n"); + panic("Unable to continue"); + printk(KERN_EMERG "Attempting to continue.\n"); mcgstl &= ~(1<<2); - wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth); + wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth); } @@ -81,25 +81,25 @@ void amd_mcheck_init(struct cpuinfo_x86 *c) machine_check_vector = k7_machine_check; wmb(); - printk (KERN_INFO "Intel machine check architecture supported.\n"); - rdmsr (MSR_IA32_MCG_CAP, l, h); + printk(KERN_INFO "Intel machine check architecture supported.\n"); + rdmsr(MSR_IA32_MCG_CAP, l, h); if (l & (1<<8)) /* Control register present ? */ - wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); + wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); nr_mce_banks = l & 0xff; /* Clear status for MC index 0 separately, we don't touch CTL, * as some K7 Athlons cause spurious MCEs when its enabled. */ if (boot_cpu_data.x86 == 6) { - wrmsr (MSR_IA32_MC0_STATUS, 0x0, 0x0); + wrmsr(MSR_IA32_MC0_STATUS, 0x0, 0x0); i = 1; } else i = 0; - for (; i<nr_mce_banks; i++) { - wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); - wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); + for (; i < nr_mce_banks; i++) { + wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); + wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); } - set_in_cr4 (X86_CR4_MCE); - printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", + set_in_cr4(X86_CR4_MCE); + printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", smp_processor_id()); } diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index e07e8c0..501ca1c 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -31,7 +31,7 @@ #include <asm/idle.h> #define MISC_MCELOG_MINOR 227 -#define NR_BANKS 6 +#define NR_SYSFS_BANKS 6 atomic_t mce_entry; @@ -46,7 +46,7 @@ static int mce_dont_init; */ static int tolerant = 1; static int banks; -static unsigned long bank[NR_BANKS] = { [0 ... NR_BANKS-1] = ~0UL }; +static unsigned long bank[NR_SYSFS_BANKS] = { [0 ... NR_SYSFS_BANKS-1] = ~0UL }; static unsigned long notify_user; static int rip_msr; static int mce_bootlog = -1; @@ -209,7 +209,7 @@ void do_machine_check(struct pt_regs * regs, long error_code) barrier(); for (i = 0; i < banks; i++) { - if (!bank[i]) + if (i < NR_SYSFS_BANKS && !bank[i]) continue; m.misc = 0; @@ -444,9 +444,10 @@ static void mce_init(void *dummy) rdmsrl(MSR_IA32_MCG_CAP, cap); banks = cap & 0xff; - if (banks > NR_BANKS) { - printk(KERN_INFO "MCE: warning: using only %d banks\n", banks); - banks = NR_BANKS; + if (banks > MCE_EXTENDED_BANK) { + banks = MCE_EXTENDED_BANK; + printk(KERN_INFO "MCE: warning: using only %d banks\n", + MCE_EXTENDED_BANK); } /* Use accurate RIP reporting if available. */ if ((cap & (1<<9)) && ((cap >> 16) & 0xff) >= 9) @@ -462,7 +463,11 @@ static void mce_init(void *dummy) wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); for (i = 0; i < banks; i++) { - wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]); + if (i < NR_SYSFS_BANKS) + wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]); + else + wrmsrl(MSR_IA32_MC0_CTL+4*i, ~0UL); + wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0); } } @@ -766,7 +771,10 @@ DEFINE_PER_CPU(struct sys_device, device_mce); } \ static SYSDEV_ATTR(name, 0644, show_ ## name, set_ ## name); -/* TBD should generate these dynamically based on number of available banks */ +/* + * TBD should generate these dynamically based on number of available banks. + * Have only 6 contol banks in /sysfs until then. + */ ACCESSOR(bank0ctl,bank[0],mce_restart()) ACCESSOR(bank1ctl,bank[1],mce_restart()) ACCESSOR(bank2ctl,bank[2],mce_restart()) diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c index cb03345..eef001a 100644 --- a/arch/x86/kernel/cpu/mcheck/p4.c +++ b/arch/x86/kernel/cpu/mcheck/p4.c @@ -8,7 +8,7 @@ #include <linux/interrupt.h> #include <linux/smp.h> -#include <asm/processor.h> +#include <asm/processor.h> #include <asm/system.h> #include <asm/msr.h> #include <asm/apic.h> @@ -32,12 +32,12 @@ struct intel_mce_extended_msrs { /* u32 *reserved[]; */ }; -static int mce_num_extended_msrs = 0; +static int mce_num_extended_msrs; #ifdef CONFIG_X86_MCE_P4THERMAL static void unexpected_thermal_interrupt(struct pt_regs *regs) -{ +{ printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n", smp_processor_id()); add_taint(TAINT_MACHINE_CHECK); @@ -83,7 +83,7 @@ static void intel_init_thermal(struct cpuinfo_x86 *c) * be some SMM goo which handles it, so we can't even put a handler * since it might be delivered via SMI already -zwanem. */ - rdmsr (MSR_IA32_MISC_ENABLE, l, h); + rdmsr(MSR_IA32_MISC_ENABLE, l, h); h = apic_read(APIC_LVTTHMR); if ((l & (1<<3)) && (h & APIC_DM_SMI)) { printk(KERN_DEBUG "CPU%d: Thermal monitoring handled by SMI\n", @@ -91,7 +91,7 @@ static void intel_init_thermal(struct cpuinfo_x86 *c) return; /* -EBUSY */ } - /* check whether a vector already exists, temporarily masked? */ + /* check whether a vector already exists, temporarily masked? */ if (h & APIC_VECTOR_MASK) { printk(KERN_DEBUG "CPU%d: Thermal LVT vector (%#x) already " "installed\n", @@ -104,18 +104,18 @@ static void intel_init_thermal(struct cpuinfo_x86 *c) h |= (APIC_DM_FIXED | APIC_LVT_MASKED); /* we'll mask till we're ready */ apic_write_around(APIC_LVTTHMR, h); - rdmsr (MSR_IA32_THERM_INTERRUPT, l, h); - wrmsr (MSR_IA32_THERM_INTERRUPT, l | 0x03 , h); + rdmsr(MSR_IA32_THERM_INTERRUPT, l, h); + wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03 , h); /* ok we're good to go... */ vendor_thermal_interrupt = intel_thermal_interrupt; - - rdmsr (MSR_IA32_MISC_ENABLE, l, h); - wrmsr (MSR_IA32_MISC_ENABLE, l | (1<<3), h); - l = apic_read (APIC_LVTTHMR); - apic_write_around (APIC_LVTTHMR, l & ~APIC_LVT_MASKED); - printk (KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu); + rdmsr(MSR_IA32_MISC_ENABLE, l, h); + wrmsr(MSR_IA32_MISC_ENABLE, l | (1<<3), h); + + l = apic_read(APIC_LVTTHMR); + apic_write_around(APIC_LVTTHMR, l & ~APIC_LVT_MASKED); + printk(KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu); /* enable thermal throttle processing */ atomic_set(&therm_throt_en, 1); @@ -129,28 +129,28 @@ static inline void intel_get_extended_msrs(struct intel_mce_extended_msrs *r) { u32 h; - rdmsr (MSR_IA32_MCG_EAX, r->eax, h); - rdmsr (MSR_IA32_MCG_EBX, r->ebx, h); - rdmsr (MSR_IA32_MCG_ECX, r->ecx, h); - rdmsr (MSR_IA32_MCG_EDX, r->edx, h); - rdmsr (MSR_IA32_MCG_ESI, r->esi, h); - rdmsr (MSR_IA32_MCG_EDI, r->edi, h); - rdmsr (MSR_IA32_MCG_EBP, r->ebp, h); - rdmsr (MSR_IA32_MCG_ESP, r->esp, h); - rdmsr (MSR_IA32_MCG_EFLAGS, r->eflags, h); - rdmsr (MSR_IA32_MCG_EIP, r->eip, h); + rdmsr(MSR_IA32_MCG_EAX, r->eax, h); + rdmsr(MSR_IA32_MCG_EBX, r->ebx, h); + rdmsr(MSR_IA32_MCG_ECX, r->ecx, h); + rdmsr(MSR_IA32_MCG_EDX, r->edx, h); + rdmsr(MSR_IA32_MCG_ESI, r->esi, h); + rdmsr(MSR_IA32_MCG_EDI, r->edi, h); + rdmsr(MSR_IA32_MCG_EBP, r->ebp, h); + rdmsr(MSR_IA32_MCG_ESP, r->esp, h); + rdmsr(MSR_IA32_MCG_EFLAGS, r->eflags, h); + rdmsr(MSR_IA32_MCG_EIP, r->eip, h); } -static void intel_machine_check(struct pt_regs * regs, long error_code) +static void intel_machine_check(struct pt_regs *regs, long error_code) { - int recover=1; + int recover = 1; u32 alow, ahigh, high, low; u32 mcgstl, mcgsth; int i; - rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth); + rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth); if (mcgstl & (1<<0)) /* Recoverable ? */ - recover=0; + recover = 0; printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n", smp_processor_id(), mcgsth, mcgstl); @@ -191,20 +191,20 @@ static void intel_machine_check(struct pt_regs * regs, long error_code) } if (recover & 2) - panic ("CPU context corrupt"); + panic("CPU context corrupt"); if (recover & 1) - panic ("Unable to continue"); + panic("Unable to continue"); printk(KERN_EMERG "Attempting to continue.\n"); - /* - * Do not clear the MSR_IA32_MCi_STATUS if the error is not + /* + * Do not clear the MSR_IA32_MCi_STATUS if the error is not * recoverable/continuable.This will allow BIOS to look at the MSRs * for errors if the OS could not log the error. */ - for (i=0; i<nr_mce_banks; i++) { + for (i = 0; i < nr_mce_banks; i++) { u32 msr; msr = MSR_IA32_MC0_STATUS+i*4; - rdmsr (msr, low, high); + rdmsr(msr, low, high); if (high&(1<<31)) { /* Clear it */ wrmsr(msr, 0UL, 0UL); @@ -214,7 +214,7 @@ static void intel_machine_check(struct pt_regs * regs, long error_code) } } mcgstl &= ~(1<<2); - wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth); + wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth); } @@ -222,30 +222,30 @@ void intel_p4_mcheck_init(struct cpuinfo_x86 *c) { u32 l, h; int i; - + machine_check_vector = intel_machine_check; wmb(); - printk (KERN_INFO "Intel machine check architecture supported.\n"); - rdmsr (MSR_IA32_MCG_CAP, l, h); + printk(KERN_INFO "Intel machine check architecture supported.\n"); + rdmsr(MSR_IA32_MCG_CAP, l, h); if (l & (1<<8)) /* Control register present ? */ - wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); + wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); nr_mce_banks = l & 0xff; - for (i=0; i<nr_mce_banks; i++) { - wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); - wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); + for (i = 0; i < nr_mce_banks; i++) { + wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); + wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); } - set_in_cr4 (X86_CR4_MCE); - printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", + set_in_cr4(X86_CR4_MCE); + printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", smp_processor_id()); /* Check for P4/Xeon extended MCE MSRs */ - rdmsr (MSR_IA32_MCG_CAP, l, h); + rdmsr(MSR_IA32_MCG_CAP, l, h); if (l & (1<<9)) {/* MCG_EXT_P */ mce_num_extended_msrs = (l >> 16) & 0xff; - printk (KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)" + printk(KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)" " available\n", smp_processor_id(), mce_num_extended_msrs); diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index 9f51e1e..84fd9f2 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -98,17 +98,6 @@ static void __init nvidia_bugs(int num, int slot, int func) } -static void __init ati_bugs(int num, int slot, int func) -{ -#ifdef CONFIG_X86_IO_APIC - if (timer_over_8254 == 1) { - timer_over_8254 = 0; - printk(KERN_INFO - "ATI board detected. Disabling timer routing over 8254.\n"); - } -#endif -} - #define QFLAG_APPLY_ONCE 0x1 #define QFLAG_APPLIED 0x2 #define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED) @@ -126,8 +115,6 @@ static struct chipset early_qrk[] __initdata = { PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs }, { PCI_VENDOR_ID_VIA, PCI_ANY_ID, PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs }, - { PCI_VENDOR_ID_ATI, PCI_ANY_ID, - PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, ati_bugs }, { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB, PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config }, {} diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 556a8df..5cf0aa9 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -420,7 +420,6 @@ END(\label) PTREGSCALL stub_clone, sys_clone, %r8 PTREGSCALL stub_fork, sys_fork, %rdi PTREGSCALL stub_vfork, sys_vfork, %rdi - PTREGSCALL stub_rt_sigsuspend, sys_rt_sigsuspend, %rdx PTREGSCALL stub_sigaltstack, sys_sigaltstack, %rdx PTREGSCALL stub_iopl, sys_iopl, %rsi @@ -1120,10 +1119,6 @@ ENTRY(coprocessor_segment_overrun) zeroentry do_coprocessor_segment_overrun END(coprocessor_segment_overrun) -ENTRY(reserved) - zeroentry do_reserved -END(reserved) - /* runs on exception stack */ ENTRY(double_fault) XCPT_FRAME diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index b817974..263b9d1 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -18,6 +18,7 @@ #include <asm/page.h> #include <asm/msr.h> #include <asm/cache.h> +#include <asm/processor-flags.h> #ifdef CONFIG_PARAVIRT #include <asm/asm-offsets.h> @@ -154,9 +155,7 @@ ENTRY(secondary_startup_64) */ /* Enable PAE mode and PGE */ - xorq %rax, %rax - btsq $5, %rax - btsq $7, %rax + movl $(X86_CR4_PAE | X86_CR4_PGE), %eax movq %rax, %cr4 /* Setup early boot stage 4 level pagetables. */ @@ -184,14 +183,10 @@ ENTRY(secondary_startup_64) 1: wrmsr /* Make changes effective */ /* Setup cr0 */ -#define CR0_PM 1 /* protected mode */ -#define CR0_MP (1<<1) -#define CR0_ET (1<<4) -#define CR0_NE (1<<5) -#define CR0_WP (1<<16) -#define CR0_AM (1<<18) -#define CR0_PAGING (1<<31) - movl $CR0_PM|CR0_MP|CR0_ET|CR0_NE|CR0_WP|CR0_AM|CR0_PAGING,%eax +#define CR0_STATE (X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | \ + X86_CR0_NE | X86_CR0_WP | X86_CR0_AM | \ + X86_CR0_PG) + movl $CR0_STATE, %eax /* Make changes effective */ movq %rax, %cr0 @@ -327,11 +322,11 @@ early_idt_ripmsg: ENTRY(name) /* Automate the creation of 1 to 1 mapping pmd entries */ -#define PMDS(START, PERM, COUNT) \ - i = 0 ; \ - .rept (COUNT) ; \ - .quad (START) + (i << 21) + (PERM) ; \ - i = i + 1 ; \ +#define PMDS(START, PERM, COUNT) \ + i = 0 ; \ + .rept (COUNT) ; \ + .quad (START) + (i << PMD_SHIFT) + (PERM) ; \ + i = i + 1 ; \ .endr /* diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 9b5cfcd..ea230ec 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -17,7 +17,7 @@ /* FSEC = 10^-15 NSEC = 10^-9 */ -#define FSEC_PER_NSEC 1000000 +#define FSEC_PER_NSEC 1000000L /* * HPET address is set in acpi/boot.c, when an ACPI entry exists @@ -206,20 +206,19 @@ static void hpet_enable_legacy_int(void) static void hpet_legacy_clockevent_register(void) { - uint64_t hpet_freq; - /* Start HPET legacy interrupts */ hpet_enable_legacy_int(); /* - * The period is a femto seconds value. We need to calculate the - * scaled math multiplication factor for nanosecond to hpet tick - * conversion. + * The mult factor is defined as (include/linux/clockchips.h) + * mult/2^shift = cyc/ns (in contrast to ns/cyc in clocksource.h) + * hpet_period is in units of femtoseconds (per cycle), so + * mult/2^shift = cyc/ns = 10^6/hpet_period + * mult = (10^6 * 2^shift)/hpet_period + * mult = (FSEC_PER_NSEC << hpet_clockevent.shift)/hpet_period */ - hpet_freq = 1000000000000000ULL; - do_div(hpet_freq, hpet_period); - hpet_clockevent.mult = div_sc((unsigned long) hpet_freq, - NSEC_PER_SEC, hpet_clockevent.shift); + hpet_clockevent.mult = div_sc((unsigned long) FSEC_PER_NSEC, + hpet_period, hpet_clockevent.shift); /* Calculate the min / max delta */ hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, &hpet_clockevent); @@ -324,7 +323,7 @@ static struct clocksource clocksource_hpet = { static int hpet_clocksource_register(void) { - u64 tmp, start, now; + u64 start, now; cycle_t t1; /* Start the counter */ @@ -351,21 +350,15 @@ static int hpet_clocksource_register(void) return -ENODEV; } - /* Initialize and register HPET clocksource - * - * hpet period is in femto seconds per cycle - * so we need to convert this to ns/cyc units - * approximated by mult/2^shift - * - * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift - * fsec/cyc * 1ns/1000000fsec * 2^shift = mult - * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult - * (fsec/cyc << shift)/1000000 = mult - * (hpet_period << shift)/FSEC_PER_NSEC = mult + /* + * The definition of mult is (include/linux/clocksource.h) + * mult/2^shift = ns/cyc and hpet_period is in units of fsec/cyc + * so we first need to convert hpet_period to ns/cyc units: + * mult/2^shift = ns/cyc = hpet_period/10^6 + * mult = (hpet_period * 2^shift)/10^6 + * mult = (hpet_period << shift)/FSEC_PER_NSEC */ - tmp = (u64)hpet_period << HPET_SHIFT; - do_div(tmp, FSEC_PER_NSEC); - clocksource_hpet.mult = (u32)tmp; + clocksource_hpet.mult = div_sc(hpet_period, FSEC_PER_NSEC, HPET_SHIFT); clocksource_register(&clocksource_hpet); diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259.c index fe631967..7a0fda8 100644 --- a/arch/x86/kernel/i8259_32.c +++ b/arch/x86/kernel/i8259.c @@ -1,8 +1,10 @@ +#include <linux/linkage.h> #include <linux/errno.h> #include <linux/signal.h> #include <linux/sched.h> #include <linux/ioport.h> #include <linux/interrupt.h> +#include <linux/timex.h> #include <linux/slab.h> #include <linux/random.h> #include <linux/init.h> @@ -10,10 +12,12 @@ #include <linux/sysdev.h> #include <linux/bitops.h> +#include <asm/acpi.h> #include <asm/atomic.h> #include <asm/system.h> #include <asm/io.h> #include <asm/timer.h> +#include <asm/hw_irq.h> #include <asm/pgtable.h> #include <asm/delay.h> #include <asm/desc.h> @@ -32,7 +36,7 @@ static int i8259A_auto_eoi; DEFINE_SPINLOCK(i8259A_lock); static void mask_and_ack_8259A(unsigned int); -static struct irq_chip i8259A_chip = { +struct irq_chip i8259A_chip = { .name = "XT-PIC", .mask = disable_8259A_irq, .disable = disable_8259A_irq, @@ -125,14 +129,14 @@ static inline int i8259A_irq_real(unsigned int irq) int irqmask = 1<<irq; if (irq < 8) { - outb(0x0B,PIC_MASTER_CMD); /* ISR register */ + outb(0x0B, PIC_MASTER_CMD); /* ISR register */ value = inb(PIC_MASTER_CMD) & irqmask; - outb(0x0A,PIC_MASTER_CMD); /* back to the IRR register */ + outb(0x0A, PIC_MASTER_CMD); /* back to the IRR register */ return value; } - outb(0x0B,PIC_SLAVE_CMD); /* ISR register */ + outb(0x0B, PIC_SLAVE_CMD); /* ISR register */ value = inb(PIC_SLAVE_CMD) & (irqmask >> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ + outb(0x0A, PIC_SLAVE_CMD); /* back to the IRR register */ return value; } @@ -171,12 +175,14 @@ handle_real_irq: if (irq & 8) { inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ outb(cached_slave_mask, PIC_SLAVE_IMR); - outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ + /* 'Specific EOI' to slave */ + outb(0x60+(irq&7), PIC_SLAVE_CMD); + /* 'Specific EOI' to master-IRQ2 */ + outb(0x60+PIC_CASCADE_IR, PIC_MASTER_CMD); } else { inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ outb(cached_master_mask, PIC_MASTER_IMR); - outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ + outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */ } spin_unlock_irqrestore(&i8259A_lock, flags); return; @@ -199,7 +205,8 @@ spurious_8259A_irq: * lets ACK and report it. [once per IRQ] */ if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); + printk(KERN_DEBUG + "spurious 8259A interrupt: IRQ%d.\n", irq); spurious_irq_mask |= irqmask; } atomic_inc(&irq_err_count); @@ -290,17 +297,34 @@ void init_8259A(int auto_eoi) * outb_pic - this has to work on a wide range of PC hardware. */ outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ +#ifndef CONFIG_X86_64 outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ +#else /* CONFIG_X86_64 */ + /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ + outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); + /* 8259A-1 (the master) has a slave on IR2 */ + outb_pic(0x04, PIC_MASTER_IMR); +#endif /* CONFIG_X86_64 */ if (auto_eoi) /* master does Auto EOI */ outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); else /* master expects normal EOI */ outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ +#ifndef CONFIG_X86_64 outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ +#else /* CONFIG_X86_64 */ + /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ + outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); + /* 8259A-2 is a slave on master's IR2 */ + outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); + /* (slave's support for AEOI in flat mode is to be investigated) */ + outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); + +#endif /* CONFIG_X86_64 */ if (auto_eoi) /* * In AEOI mode we just have to mask the interrupt @@ -317,93 +341,3 @@ void init_8259A(int auto_eoi) spin_unlock_irqrestore(&i8259A_lock, flags); } - -/* - * Note that on a 486, we don't want to do a SIGFPE on an irq13 - * as the irq is unreliable, and exception 16 works correctly - * (ie as explained in the intel literature). On a 386, you - * can't use exception 16 due to bad IBM design, so we have to - * rely on the less exact irq13. - * - * Careful.. Not only is IRQ13 unreliable, but it is also - * leads to races. IBM designers who came up with it should - * be shot. - */ - - -static irqreturn_t math_error_irq(int cpl, void *dev_id) -{ - extern void math_error(void __user *); - outb(0,0xF0); - if (ignore_fpu_irq || !boot_cpu_data.hard_math) - return IRQ_NONE; - math_error((void __user *)get_irq_regs()->ip); - return IRQ_HANDLED; -} - -/* - * New motherboards sometimes make IRQ 13 be a PCI interrupt, - * so allow interrupt sharing. - */ -static struct irqaction fpu_irq = { - .handler = math_error_irq, - .mask = CPU_MASK_NONE, - .name = "fpu", -}; - -void __init init_ISA_irqs (void) -{ - int i; - -#ifdef CONFIG_X86_LOCAL_APIC - init_bsp_APIC(); -#endif - init_8259A(0); - - /* - * 16 old-style INTA-cycle interrupts: - */ - for (i = 0; i < 16; i++) { - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } -} - -/* Overridden in paravirt.c */ -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -void __init native_init_IRQ(void) -{ - int i; - - /* all the set up before the call gates are initialised */ - pre_intr_init_hook(); - - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { - int vector = FIRST_EXTERNAL_VECTOR + i; - if (i >= NR_IRQS) - break; - /* SYSCALL_VECTOR was reserved in trap_init. */ - if (!test_bit(vector, used_vectors)) - set_intr_gate(vector, interrupt[i]); - } - - /* setup after call gates are initialised (usually add in - * the architecture specific gates) - */ - intr_init_hook(); - - /* - * External FPU? Set up irq13 if so, for - * original braindamaged IBM FERR coupling. - */ - if (boot_cpu_data.hard_math && !cpu_has_fpu) - setup_irq(FPU_IRQ, &fpu_irq); - - irq_ctx_init(smp_processor_id()); -} diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c deleted file mode 100644 index fa57a15..0000000 --- a/arch/x86/kernel/i8259_64.c +++ /dev/null @@ -1,512 +0,0 @@ -#include <linux/linkage.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/sysdev.h> -#include <linux/bitops.h> - -#include <asm/acpi.h> -#include <asm/atomic.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/hw_irq.h> -#include <asm/pgtable.h> -#include <asm/delay.h> -#include <asm/desc.h> -#include <asm/apic.h> -#include <asm/i8259.h> - -/* - * Common place to define all x86 IRQ vectors - * - * This builds up the IRQ handler stubs using some ugly macros in irq.h - * - * These macros create the low-level assembly IRQ routines that save - * register context and call do_IRQ(). do_IRQ() then does all the - * operations that are needed to keep the AT (or SMP IOAPIC) - * interrupt-controller happy. - */ - -#define BI(x,y) \ - BUILD_IRQ(x##y) - -#define BUILD_16_IRQS(x) \ - BI(x,0) BI(x,1) BI(x,2) BI(x,3) \ - BI(x,4) BI(x,5) BI(x,6) BI(x,7) \ - BI(x,8) BI(x,9) BI(x,a) BI(x,b) \ - BI(x,c) BI(x,d) BI(x,e) BI(x,f) - -/* - * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: - * (these are usually mapped to vectors 0x30-0x3f) - */ - -/* - * The IO-APIC gives us many more interrupt sources. Most of these - * are unused but an SMP system is supposed to have enough memory ... - * sometimes (mostly wrt. hw bugs) we get corrupted vectors all - * across the spectrum, so we really want to be prepared to get all - * of these. Plus, more powerful systems might have more than 64 - * IO-APIC registers. - * - * (these are usually mapped into the 0x30-0xff vector range) - */ - BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3) -BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7) -BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb) -BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf) - -#undef BUILD_16_IRQS -#undef BI - - -#define IRQ(x,y) \ - IRQ##x##y##_interrupt - -#define IRQLIST_16(x) \ - IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \ - IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \ - IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \ - IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f) - -/* for the irq vectors */ -static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = { - IRQLIST_16(0x2), IRQLIST_16(0x3), - IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7), - IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb), - IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf) -}; - -#undef IRQ -#undef IRQLIST_16 - -/* - * This is the 'legacy' 8259A Programmable Interrupt Controller, - * present in the majority of PC/AT boxes. - * plus some generic x86 specific things if generic specifics makes - * any sense at all. - * this file should become arch/i386/kernel/irq.c when the old irq.c - * moves to arch independent land - */ - -static int i8259A_auto_eoi; -DEFINE_SPINLOCK(i8259A_lock); -static void mask_and_ack_8259A(unsigned int); - -static struct irq_chip i8259A_chip = { - .name = "XT-PIC", - .mask = disable_8259A_irq, - .disable = disable_8259A_irq, - .unmask = enable_8259A_irq, - .mask_ack = mask_and_ack_8259A, -}; - -/* - * 8259A PIC functions to handle ISA devices: - */ - -/* - * This contains the irq mask for both 8259A irq controllers, - */ -unsigned int cached_irq_mask = 0xffff; - -/* - * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) - * boards the timer interrupt is not really connected to any IO-APIC pin, - * it's fed to the master 8259A's IR0 line only. - * - * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. - * this 'mixed mode' IRQ handling costs nothing because it's only used - * at IRQ setup time. - */ -unsigned long io_apic_irqs; - -void disable_8259A_irq(unsigned int irq) -{ - unsigned int mask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask |= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -void enable_8259A_irq(unsigned int irq) -{ - unsigned int mask = ~(1 << irq); - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask &= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -int i8259A_irq_pending(unsigned int irq) -{ - unsigned int mask = 1<<irq; - unsigned long flags; - int ret; - - spin_lock_irqsave(&i8259A_lock, flags); - if (irq < 8) - ret = inb(PIC_MASTER_CMD) & mask; - else - ret = inb(PIC_SLAVE_CMD) & (mask >> 8); - spin_unlock_irqrestore(&i8259A_lock, flags); - - return ret; -} - -void make_8259A_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - io_apic_irqs &= ~(1<<irq); - set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq, - "XT"); - enable_irq(irq); -} - -/* - * This function assumes to be called rarely. Switching between - * 8259A registers is slow. - * This has to be protected by the irq controller spinlock - * before being called. - */ -static inline int i8259A_irq_real(unsigned int irq) -{ - int value; - int irqmask = 1<<irq; - - if (irq < 8) { - outb(0x0B,PIC_MASTER_CMD); /* ISR register */ - value = inb(PIC_MASTER_CMD) & irqmask; - outb(0x0A,PIC_MASTER_CMD); /* back to the IRR register */ - return value; - } - outb(0x0B,PIC_SLAVE_CMD); /* ISR register */ - value = inb(PIC_SLAVE_CMD) & (irqmask >> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ - return value; -} - -/* - * Careful! The 8259A is a fragile beast, it pretty - * much _has_ to be done exactly like this (mask it - * first, _then_ send the EOI, and the order of EOI - * to the two 8259s is important! - */ -static void mask_and_ack_8259A(unsigned int irq) -{ - unsigned int irqmask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - /* - * Lightweight spurious IRQ detection. We do not want - * to overdo spurious IRQ handling - it's usually a sign - * of hardware problems, so we only do the checks we can - * do without slowing down good hardware unnecessarily. - * - * Note that IRQ7 and IRQ15 (the two spurious IRQs - * usually resulting from the 8259A-1|2 PICs) occur - * even if the IRQ is masked in the 8259A. Thus we - * can check spurious 8259A IRQs without doing the - * quite slow i8259A_irq_real() call for every IRQ. - * This does not cover 100% of spurious interrupts, - * but should be enough to warn the user that there - * is something bad going on ... - */ - if (cached_irq_mask & irqmask) - goto spurious_8259A_irq; - cached_irq_mask |= irqmask; - -handle_real_irq: - if (irq & 8) { - inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ - outb(cached_slave_mask, PIC_SLAVE_IMR); - /* 'Specific EOI' to slave */ - outb(0x60+(irq&7),PIC_SLAVE_CMD); - /* 'Specific EOI' to master-IRQ2 */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); - } else { - inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ - outb(cached_master_mask, PIC_MASTER_IMR); - /* 'Specific EOI' to master */ - outb(0x60+irq,PIC_MASTER_CMD); - } - spin_unlock_irqrestore(&i8259A_lock, flags); - return; - -spurious_8259A_irq: - /* - * this is the slow path - should happen rarely. - */ - if (i8259A_irq_real(irq)) - /* - * oops, the IRQ _is_ in service according to the - * 8259A - not spurious, go handle it. - */ - goto handle_real_irq; - - { - static int spurious_irq_mask; - /* - * At this point we can be sure the IRQ is spurious, - * lets ACK and report it. [once per IRQ] - */ - if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG - "spurious 8259A interrupt: IRQ%d.\n", irq); - spurious_irq_mask |= irqmask; - } - atomic_inc(&irq_err_count); - /* - * Theoretically we do not have to handle this IRQ, - * but in Linux this does not cause problems and is - * simpler for us. - */ - goto handle_real_irq; - } -} - -static char irq_trigger[2]; -/** - * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ - */ -static void restore_ELCR(char *trigger) -{ - outb(trigger[0], 0x4d0); - outb(trigger[1], 0x4d1); -} - -static void save_ELCR(char *trigger) -{ - /* IRQ 0,1,2,8,13 are marked as reserved */ - trigger[0] = inb(0x4d0) & 0xF8; - trigger[1] = inb(0x4d1) & 0xDE; -} - -static int i8259A_resume(struct sys_device *dev) -{ - init_8259A(i8259A_auto_eoi); - restore_ELCR(irq_trigger); - return 0; -} - -static int i8259A_suspend(struct sys_device *dev, pm_message_t state) -{ - save_ELCR(irq_trigger); - return 0; -} - -static int i8259A_shutdown(struct sys_device *dev) -{ - /* Put the i8259A into a quiescent state that - * the kernel initialization code can get it - * out of. - */ - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ - return 0; -} - -static struct sysdev_class i8259_sysdev_class = { - .name = "i8259", - .suspend = i8259A_suspend, - .resume = i8259A_resume, - .shutdown = i8259A_shutdown, -}; - -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - -static int __init i8259A_init_sysfs(void) -{ - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; -} - -device_initcall(i8259A_init_sysfs); - -void init_8259A(int auto_eoi) -{ - unsigned long flags; - - i8259A_auto_eoi = auto_eoi; - - spin_lock_irqsave(&i8259A_lock, flags); - - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ - - /* - * outb_pic - this has to work on a wide range of PC hardware. - */ - outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ - /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ - outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); - /* 8259A-1 (the master) has a slave on IR2 */ - outb_pic(0x04, PIC_MASTER_IMR); - if (auto_eoi) /* master does Auto EOI */ - outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); - else /* master expects normal EOI */ - outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); - - outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ - /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ - outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); - /* 8259A-2 is a slave on master's IR2 */ - outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); - /* (slave's support for AEOI in flat mode is to be investigated) */ - outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); - - if (auto_eoi) - /* - * In AEOI mode we just have to mask the interrupt - * when acking. - */ - i8259A_chip.mask_ack = disable_8259A_irq; - else - i8259A_chip.mask_ack = mask_and_ack_8259A; - - udelay(100); /* wait for 8259A to initialize */ - - outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ - outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ - - spin_unlock_irqrestore(&i8259A_lock, flags); -} - - - - -/* - * IRQ2 is cascade interrupt to second interrupt controller - */ - -static struct irqaction irq2 = { - .handler = no_action, - .mask = CPU_MASK_NONE, - .name = "cascade", -}; -DEFINE_PER_CPU(vector_irq_t, vector_irq) = { - [0 ... IRQ0_VECTOR - 1] = -1, - [IRQ0_VECTOR] = 0, - [IRQ1_VECTOR] = 1, - [IRQ2_VECTOR] = 2, - [IRQ3_VECTOR] = 3, - [IRQ4_VECTOR] = 4, - [IRQ5_VECTOR] = 5, - [IRQ6_VECTOR] = 6, - [IRQ7_VECTOR] = 7, - [IRQ8_VECTOR] = 8, - [IRQ9_VECTOR] = 9, - [IRQ10_VECTOR] = 10, - [IRQ11_VECTOR] = 11, - [IRQ12_VECTOR] = 12, - [IRQ13_VECTOR] = 13, - [IRQ14_VECTOR] = 14, - [IRQ15_VECTOR] = 15, - [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 -}; - -void __init init_ISA_irqs (void) -{ - int i; - - init_bsp_APIC(); - init_8259A(0); - - for (i = 0; i < NR_IRQS; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - - if (i < 16) { - /* - * 16 old-style INTA-cycle interrupts: - */ - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } else { - /* - * 'high' PCI IRQs filled in on demand - */ - irq_desc[i].chip = &no_irq_chip; - } - } -} - -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -void __init native_init_IRQ(void) -{ - int i; - - init_ISA_irqs(); - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { - int vector = FIRST_EXTERNAL_VECTOR + i; - if (vector != IA32_SYSCALL_VECTOR) - set_intr_gate(vector, interrupt[i]); - } - -#ifdef CONFIG_SMP - /* - * The reschedule interrupt is a CPU-to-CPU reschedule-helper - * IPI, driven by wakeup. - */ - set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - - /* IPIs for invalidation */ - set_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); - - /* IPI for generic function call */ - set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); - - /* Low priority IPI to cleanup after moving an irq */ - set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); -#endif - set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); - set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); - - /* self generated IPI for local APIC timer */ - set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - - /* IPI vectors for APIC spurious and error interrupts */ - set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); - - if (!acpi_ioapic) - setup_irq(2, &irq2); -} diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 4dc8600d9..d4f9df2 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -58,7 +58,7 @@ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; static DEFINE_SPINLOCK(ioapic_lock); static DEFINE_SPINLOCK(vector_lock); -int timer_over_8254 __initdata = 1; +int timer_through_8259 __initdata; /* * Is the SiS APIC rmw bug present ? @@ -239,7 +239,7 @@ static void __init replace_pin_at_irq(unsigned int irq, } } -static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsigned long disable) +static void __modify_IO_APIC_irq(unsigned int irq, unsigned long enable, unsigned long disable) { struct irq_pin_list *entry = irq_2_pin + irq; unsigned int pin, reg; @@ -259,30 +259,32 @@ static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsign } /* mask = 1 */ -static void __mask_IO_APIC_irq (unsigned int irq) +static void __mask_IO_APIC_irq(unsigned int irq) { - __modify_IO_APIC_irq(irq, 0x00010000, 0); + __modify_IO_APIC_irq(irq, IO_APIC_REDIR_MASKED, 0); } /* mask = 0 */ -static void __unmask_IO_APIC_irq (unsigned int irq) +static void __unmask_IO_APIC_irq(unsigned int irq) { - __modify_IO_APIC_irq(irq, 0, 0x00010000); + __modify_IO_APIC_irq(irq, 0, IO_APIC_REDIR_MASKED); } /* mask = 1, trigger = 0 */ -static void __mask_and_edge_IO_APIC_irq (unsigned int irq) +static void __mask_and_edge_IO_APIC_irq(unsigned int irq) { - __modify_IO_APIC_irq(irq, 0x00010000, 0x00008000); + __modify_IO_APIC_irq(irq, IO_APIC_REDIR_MASKED, + IO_APIC_REDIR_LEVEL_TRIGGER); } /* mask = 0, trigger = 1 */ -static void __unmask_and_level_IO_APIC_irq (unsigned int irq) +static void __unmask_and_level_IO_APIC_irq(unsigned int irq) { - __modify_IO_APIC_irq(irq, 0x00008000, 0x00010000); + __modify_IO_APIC_irq(irq, IO_APIC_REDIR_LEVEL_TRIGGER, + IO_APIC_REDIR_MASKED); } -static void mask_IO_APIC_irq (unsigned int irq) +static void mask_IO_APIC_irq(unsigned int irq) { unsigned long flags; @@ -291,7 +293,7 @@ static void mask_IO_APIC_irq (unsigned int irq) spin_unlock_irqrestore(&ioapic_lock, flags); } -static void unmask_IO_APIC_irq (unsigned int irq) +static void unmask_IO_APIC_irq(unsigned int irq) { unsigned long flags; @@ -303,7 +305,7 @@ static void unmask_IO_APIC_irq (unsigned int irq) static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) { struct IO_APIC_route_entry entry; - + /* Check delivery_mode to be sure we're not clearing an SMI pin */ entry = ioapic_read_entry(apic, pin); if (entry.delivery_mode == dest_SMI) @@ -315,7 +317,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) ioapic_mask_entry(apic, pin); } -static void clear_IO_APIC (void) +static void clear_IO_APIC(void) { int apic, pin; @@ -332,7 +334,7 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) struct irq_pin_list *entry = irq_2_pin + irq; unsigned int apicid_value; cpumask_t tmp; - + cpus_and(tmp, cpumask, cpu_online_map); if (cpus_empty(tmp)) tmp = TARGET_CPUS; @@ -361,7 +363,7 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) # include <linux/kernel_stat.h> /* kstat */ # include <linux/slab.h> /* kmalloc() */ # include <linux/timer.h> - + #define IRQBALANCE_CHECK_ARCH -999 #define MAX_BALANCED_IRQ_INTERVAL (5*HZ) #define MIN_BALANCED_IRQ_INTERVAL (HZ/2) @@ -373,14 +375,14 @@ static int physical_balance __read_mostly; static long balanced_irq_interval __read_mostly = MAX_BALANCED_IRQ_INTERVAL; static struct irq_cpu_info { - unsigned long * last_irq; - unsigned long * irq_delta; + unsigned long *last_irq; + unsigned long *irq_delta; unsigned long irq; } irq_cpu_data[NR_CPUS]; #define CPU_IRQ(cpu) (irq_cpu_data[cpu].irq) -#define LAST_CPU_IRQ(cpu,irq) (irq_cpu_data[cpu].last_irq[irq]) -#define IRQ_DELTA(cpu,irq) (irq_cpu_data[cpu].irq_delta[irq]) +#define LAST_CPU_IRQ(cpu, irq) (irq_cpu_data[cpu].last_irq[irq]) +#define IRQ_DELTA(cpu, irq) (irq_cpu_data[cpu].irq_delta[irq]) #define IDLE_ENOUGH(cpu,now) \ (idle_cpu(cpu) && ((now) - per_cpu(irq_stat, (cpu)).idle_timestamp > 1)) @@ -419,8 +421,8 @@ inside: if (cpu == -1) cpu = NR_CPUS-1; } - } while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu,allowed_mask) || - (search_idle && !IDLE_ENOUGH(cpu,now))); + } while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu, allowed_mask) || + (search_idle && !IDLE_ENOUGH(cpu, now))); return cpu; } @@ -430,15 +432,14 @@ static inline void balance_irq(int cpu, int irq) unsigned long now = jiffies; cpumask_t allowed_mask; unsigned int new_cpu; - + if (irqbalance_disabled) - return; + return; cpus_and(allowed_mask, cpu_online_map, balance_irq_affinity[irq]); new_cpu = move(cpu, allowed_mask, now, 1); - if (cpu != new_cpu) { + if (cpu != new_cpu) set_pending_irq(irq, cpumask_of_cpu(new_cpu)); - } } static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold) @@ -450,14 +451,14 @@ static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold) if (!irq_desc[j].action) continue; /* Is it a significant load ? */ - if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i),j) < + if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i), j) < useful_load_threshold) continue; balance_irq(i, j); } } balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL, - balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); + balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); return; } @@ -486,22 +487,22 @@ static void do_irq_balance(void) /* Is this an active IRQ or balancing disabled ? */ if (!irq_desc[j].action || irq_balancing_disabled(j)) continue; - if ( package_index == i ) - IRQ_DELTA(package_index,j) = 0; + if (package_index == i) + IRQ_DELTA(package_index, j) = 0; /* Determine the total count per processor per IRQ */ value_now = (unsigned long) kstat_cpu(i).irqs[j]; /* Determine the activity per processor per IRQ */ - delta = value_now - LAST_CPU_IRQ(i,j); + delta = value_now - LAST_CPU_IRQ(i, j); /* Update last_cpu_irq[][] for the next time */ - LAST_CPU_IRQ(i,j) = value_now; + LAST_CPU_IRQ(i, j) = value_now; /* Ignore IRQs whose rate is less than the clock */ if (delta < useful_load_threshold) continue; /* update the load for the processor or package total */ - IRQ_DELTA(package_index,j) += delta; + IRQ_DELTA(package_index, j) += delta; /* Keep track of the higher numbered sibling as well */ if (i != package_index) @@ -527,7 +528,8 @@ static void do_irq_balance(void) max_cpu_irq = ULONG_MAX; tryanothercpu: - /* Look for heaviest loaded processor. + /* + * Look for heaviest loaded processor. * We may come back to get the next heaviest loaded processor. * Skip processors with trivial loads. */ @@ -536,7 +538,7 @@ tryanothercpu: for_each_online_cpu(i) { if (i != CPU_TO_PACKAGEINDEX(i)) continue; - if (max_cpu_irq <= CPU_IRQ(i)) + if (max_cpu_irq <= CPU_IRQ(i)) continue; if (tmp_cpu_irq < CPU_IRQ(i)) { tmp_cpu_irq = CPU_IRQ(i); @@ -545,8 +547,9 @@ tryanothercpu: } if (tmp_loaded == -1) { - /* In the case of small number of heavy interrupt sources, - * loading some of the cpus too much. We use Ingo's original + /* + * In the case of small number of heavy interrupt sources, + * loading some of the cpus too much. We use Ingo's original * approach to rotate them around. */ if (!first_attempt && imbalance >= useful_load_threshold) { @@ -555,13 +558,14 @@ tryanothercpu: } goto not_worth_the_effort; } - + first_attempt = 0; /* heaviest search */ max_cpu_irq = tmp_cpu_irq; /* load */ max_loaded = tmp_loaded; /* processor */ imbalance = (max_cpu_irq - min_cpu_irq) / 2; - - /* if imbalance is less than approx 10% of max load, then + + /* + * if imbalance is less than approx 10% of max load, then * observe diminishing returns action. - quit */ if (imbalance < (max_cpu_irq >> 3)) @@ -577,26 +581,25 @@ tryanotherirq: /* Is this an active IRQ? */ if (!irq_desc[j].action) continue; - if (imbalance <= IRQ_DELTA(max_loaded,j)) + if (imbalance <= IRQ_DELTA(max_loaded, j)) continue; /* Try to find the IRQ that is closest to the imbalance * without going over. */ - if (move_this_load < IRQ_DELTA(max_loaded,j)) { - move_this_load = IRQ_DELTA(max_loaded,j); + if (move_this_load < IRQ_DELTA(max_loaded, j)) { + move_this_load = IRQ_DELTA(max_loaded, j); selected_irq = j; } } - if (selected_irq == -1) { + if (selected_irq == -1) goto tryanothercpu; - } imbalance = move_this_load; - + /* For physical_balance case, we accumulated both load * values in the one of the siblings cpu_irq[], * to use the same code for physical and logical processors - * as much as possible. + * as much as possible. * * NOTE: the cpu_irq[] array holds the sum of the load for * sibling A and sibling B in the slot for the lowest numbered @@ -625,11 +628,11 @@ tryanotherirq: /* mark for change destination */ set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded)); - /* Since we made a change, come back sooner to + /* Since we made a change, come back sooner to * check for more variation. */ balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL, - balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); + balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); return; } goto tryanotherirq; @@ -640,7 +643,7 @@ not_worth_the_effort: * upward */ balanced_irq_interval = min((long)MAX_BALANCED_IRQ_INTERVAL, - balanced_irq_interval + BALANCED_IRQ_MORE_DELTA); + balanced_irq_interval + BALANCED_IRQ_MORE_DELTA); return; } @@ -679,13 +682,13 @@ static int __init balanced_irq_init(void) cpumask_t tmp; cpus_shift_right(tmp, cpu_online_map, 2); - c = &boot_cpu_data; + c = &boot_cpu_data; /* When not overwritten by the command line ask subarchitecture. */ if (irqbalance_disabled == IRQBALANCE_CHECK_ARCH) irqbalance_disabled = NO_BALANCE_IRQ; if (irqbalance_disabled) return 0; - + /* disable irqbalance completely if there is only one processor online */ if (num_online_cpus() < 2) { irqbalance_disabled = 1; @@ -699,16 +702,14 @@ static int __init balanced_irq_init(void) physical_balance = 1; for_each_online_cpu(i) { - irq_cpu_data[i].irq_delta = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); - irq_cpu_data[i].last_irq = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); + irq_cpu_data[i].irq_delta = kzalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); + irq_cpu_data[i].last_irq = kzalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); if (irq_cpu_data[i].irq_delta == NULL || irq_cpu_data[i].last_irq == NULL) { printk(KERN_ERR "balanced_irq_init: out of memory"); goto failed; } - memset(irq_cpu_data[i].irq_delta,0,sizeof(unsigned long) * NR_IRQS); - memset(irq_cpu_data[i].last_irq,0,sizeof(unsigned long) * NR_IRQS); } - + printk(KERN_INFO "Starting balanced_irq\n"); if (!IS_ERR(kthread_run(balanced_irq, NULL, "kirqd"))) return 0; @@ -843,7 +844,7 @@ static int __init find_isa_irq_apic(int irq, int type) } if (i < mp_irq_entries) { int apic; - for(apic = 0; apic < nr_ioapics; apic++) { + for (apic = 0; apic < nr_ioapics; apic++) { if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic) return apic; } @@ -880,7 +881,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) !mp_irqs[i].mpc_irqtype && (bus == lbus) && (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { - int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq); + int irq = pin_2_irq(i, apic, mp_irqs[i].mpc_dstirq); if (!(apic || IO_APIC_IRQ(irq))) continue; @@ -900,7 +901,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); /* - * This function currently is only a helper for the i386 smp boot process where + * This function currently is only a helper for the i386 smp boot process where * we need to reprogram the ioredtbls to cater for the cpus which have come online * so mask in all cases should simply be TARGET_CPUS */ @@ -975,37 +976,36 @@ static int MPBIOS_polarity(int idx) /* * Determine IRQ line polarity (high active or low active): */ - switch (mp_irqs[idx].mpc_irqflag & 3) + switch (mp_irqs[idx].mpc_irqflag & 3) { + case 0: /* conforms, ie. bus-type dependent polarity */ { - case 0: /* conforms, ie. bus-type dependent polarity */ - { - polarity = test_bit(bus, mp_bus_not_pci)? - default_ISA_polarity(idx): - default_PCI_polarity(idx); - break; - } - case 1: /* high active */ - { - polarity = 0; - break; - } - case 2: /* reserved */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - polarity = 1; - break; - } - case 3: /* low active */ - { - polarity = 1; - break; - } - default: /* invalid */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - polarity = 1; - break; - } + polarity = test_bit(bus, mp_bus_not_pci)? + default_ISA_polarity(idx): + default_PCI_polarity(idx); + break; + } + case 1: /* high active */ + { + polarity = 0; + break; + } + case 2: /* reserved */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + polarity = 1; + break; + } + case 3: /* low active */ + { + polarity = 1; + break; + } + default: /* invalid */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + polarity = 1; + break; + } } return polarity; } @@ -1018,69 +1018,67 @@ static int MPBIOS_trigger(int idx) /* * Determine IRQ trigger mode (edge or level sensitive): */ - switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) + switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) { + case 0: /* conforms, ie. bus-type dependent */ { - case 0: /* conforms, ie. bus-type dependent */ - { - trigger = test_bit(bus, mp_bus_not_pci)? - default_ISA_trigger(idx): - default_PCI_trigger(idx); + trigger = test_bit(bus, mp_bus_not_pci)? + default_ISA_trigger(idx): + default_PCI_trigger(idx); #if defined(CONFIG_EISA) || defined(CONFIG_MCA) - switch (mp_bus_id_to_type[bus]) - { - case MP_BUS_ISA: /* ISA pin */ - { - /* set before the switch */ - break; - } - case MP_BUS_EISA: /* EISA pin */ - { - trigger = default_EISA_trigger(idx); - break; - } - case MP_BUS_PCI: /* PCI pin */ - { - /* set before the switch */ - break; - } - case MP_BUS_MCA: /* MCA pin */ - { - trigger = default_MCA_trigger(idx); - break; - } - default: - { - printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 1; - break; - } - } -#endif + switch (mp_bus_id_to_type[bus]) { + case MP_BUS_ISA: /* ISA pin */ + { + /* set before the switch */ break; } - case 1: /* edge */ + case MP_BUS_EISA: /* EISA pin */ { - trigger = 0; + trigger = default_EISA_trigger(idx); break; } - case 2: /* reserved */ + case MP_BUS_PCI: /* PCI pin */ { - printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 1; + /* set before the switch */ break; } - case 3: /* level */ + case MP_BUS_MCA: /* MCA pin */ { - trigger = 1; + trigger = default_MCA_trigger(idx); break; } - default: /* invalid */ + default: { printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 0; + trigger = 1; break; } } +#endif + break; + } + case 1: /* edge */ + { + trigger = 0; + break; + } + case 2: /* reserved */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + trigger = 1; + break; + } + case 3: /* level */ + { + trigger = 1; + break; + } + default: /* invalid */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + trigger = 0; + break; + } + } return trigger; } @@ -1148,8 +1146,8 @@ static inline int IO_APIC_irq_trigger(int irq) for (apic = 0; apic < nr_ioapics; apic++) { for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { - idx = find_irq_entry(apic,pin,mp_INT); - if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin))) + idx = find_irq_entry(apic, pin, mp_INT); + if ((idx != -1) && (irq == pin_2_irq(idx, apic, pin))) return irq_trigger(idx); } } @@ -1164,7 +1162,7 @@ static u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 } static int __assign_irq_vector(int irq) { - static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0; + static int current_vector = FIRST_DEVICE_VECTOR, current_offset; int vector, offset; BUG_ON((unsigned)irq >= NR_IRQ_VECTORS); @@ -1237,15 +1235,15 @@ static void __init setup_IO_APIC_irqs(void) /* * add it to the IO-APIC irq-routing table: */ - memset(&entry,0,sizeof(entry)); + memset(&entry, 0, sizeof(entry)); entry.delivery_mode = INT_DELIVERY_MODE; entry.dest_mode = INT_DEST_MODE; entry.mask = 0; /* enable IRQ */ - entry.dest.logical.logical_dest = + entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); - idx = find_irq_entry(apic,pin,mp_INT); + idx = find_irq_entry(apic, pin, mp_INT); if (idx == -1) { if (first_notcon) { apic_printk(APIC_VERBOSE, KERN_DEBUG @@ -1289,7 +1287,7 @@ static void __init setup_IO_APIC_irqs(void) vector = assign_irq_vector(irq); entry.vector = vector; ioapic_register_intr(irq, vector, IOAPIC_AUTO); - + if (!apic && (irq < 16)) disable_8259A_irq(irq); } @@ -1302,25 +1300,21 @@ static void __init setup_IO_APIC_irqs(void) } /* - * Set up the 8259A-master output pin: + * Set up the timer pin, possibly with the 8259A-master behind. */ -static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector) +static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin, + int vector) { struct IO_APIC_route_entry entry; - memset(&entry,0,sizeof(entry)); - - disable_8259A_irq(0); - - /* mask LVT0 */ - apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); + memset(&entry, 0, sizeof(entry)); /* * We use logical delivery to get the timer IRQ * to the first CPU. */ entry.dest_mode = INT_DEST_MODE; - entry.mask = 0; /* unmask IRQ now */ + entry.mask = 1; /* mask IRQ now */ entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); entry.delivery_mode = INT_DELIVERY_MODE; entry.polarity = 0; @@ -1329,17 +1323,14 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in /* * The timer IRQ doesn't have to know that behind the - * scene we have a 8259A-master in AEOI mode ... + * scene we may have a 8259A-master in AEOI mode ... */ - irq_desc[0].chip = &ioapic_chip; - set_irq_handler(0, handle_edge_irq); + ioapic_register_intr(0, vector, IOAPIC_EDGE); /* * Add it to the IO-APIC irq-routing table: */ ioapic_write_entry(apic, pin, entry); - - enable_8259A_irq(0); } void __init print_IO_APIC(void) @@ -1354,7 +1345,7 @@ void __init print_IO_APIC(void) if (apic_verbosity == APIC_QUIET) return; - printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); + printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); for (i = 0; i < nr_ioapics; i++) printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]); @@ -1459,7 +1450,7 @@ void __init print_IO_APIC(void) #if 0 -static void print_APIC_bitfield (int base) +static void print_APIC_bitfield(int base) { unsigned int v; int i, j; @@ -1480,7 +1471,7 @@ static void print_APIC_bitfield (int base) } } -void /*__init*/ print_local_APIC(void * dummy) +void /*__init*/ print_local_APIC(void *dummy) { unsigned int v, ver, maxlvt; @@ -1489,6 +1480,7 @@ void /*__init*/ print_local_APIC(void * dummy) printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", smp_processor_id(), hard_smp_processor_id()); + v = apic_read(APIC_ID); printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(read_apic_id())); v = apic_read(APIC_LVR); @@ -1563,7 +1555,7 @@ void /*__init*/ print_local_APIC(void * dummy) printk("\n"); } -void print_all_local_APICs (void) +void print_all_local_APICs(void) { on_each_cpu(print_local_APIC, NULL, 1, 1); } @@ -1586,11 +1578,11 @@ void /*__init*/ print_PIC(void) v = inb(0xa0) << 8 | inb(0x20); printk(KERN_DEBUG "... PIC IRR: %04x\n", v); - outb(0x0b,0xa0); - outb(0x0b,0x20); + outb(0x0b, 0xa0); + outb(0x0b, 0x20); v = inb(0xa0) << 8 | inb(0x20); - outb(0x0a,0xa0); - outb(0x0a,0x20); + outb(0x0a, 0xa0); + outb(0x0a, 0x20); spin_unlock_irqrestore(&i8259A_lock, flags); @@ -1626,7 +1618,7 @@ static void __init enable_IO_APIC(void) spin_unlock_irqrestore(&ioapic_lock, flags); nr_ioapic_registers[apic] = reg_01.bits.entries+1; } - for(apic = 0; apic < nr_ioapics; apic++) { + for (apic = 0; apic < nr_ioapics; apic++) { int pin; /* See if any of the pins is in ExtINT mode */ for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { @@ -1748,7 +1740,7 @@ static void __init setup_ioapic_ids_from_mpc(void) spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(apic, 0); spin_unlock_irqrestore(&ioapic_lock, flags); - + old_id = mp_ioapics[apic].mpc_apicid; if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) { @@ -1800,7 +1792,7 @@ static void __init setup_ioapic_ids_from_mpc(void) /* * Read the right value from the MPC table and * write it into the ID register. - */ + */ apic_printk(APIC_VERBOSE, KERN_INFO "...changing IO-APIC physical APIC ID to %d ...", mp_ioapics[apic].mpc_apicid); @@ -2020,7 +2012,7 @@ static void ack_apic(unsigned int irq) ack_APIC_irq(); } -static void mask_lapic_irq (unsigned int irq) +static void mask_lapic_irq(unsigned int irq) { unsigned long v; @@ -2028,7 +2020,7 @@ static void mask_lapic_irq (unsigned int irq) apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED); } -static void unmask_lapic_irq (unsigned int irq) +static void unmask_lapic_irq(unsigned int irq) { unsigned long v; @@ -2037,7 +2029,7 @@ static void unmask_lapic_irq (unsigned int irq) } static struct irq_chip lapic_chip __read_mostly = { - .name = "local-APIC-edge", + .name = "local-APIC", .mask = mask_lapic_irq, .unmask = unmask_lapic_irq, .eoi = ack_apic, @@ -2046,14 +2038,14 @@ static struct irq_chip lapic_chip __read_mostly = { static void __init setup_nmi(void) { /* - * Dirty trick to enable the NMI watchdog ... + * Dirty trick to enable the NMI watchdog ... * We put the 8259A master into AEOI mode and * unmask on all local APICs LVT0 as NMI. * * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire') * is from Maciej W. Rozycki - so we do not have to EOI from * the NMI handler or the timer interrupt. - */ + */ apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ..."); enable_NMI_through_LVT0(); @@ -2129,11 +2121,16 @@ static inline void __init unlock_ExtINT_logic(void) static inline void __init check_timer(void) { int apic1, pin1, apic2, pin2; + int no_pin1 = 0; int vector; + unsigned int ver; unsigned long flags; local_irq_save(flags); + ver = apic_read(APIC_LVR); + ver = GET_APIC_VERSION(ver); + /* * get/set the timer IRQ vector: */ @@ -2142,17 +2139,17 @@ static inline void __init check_timer(void) set_intr_gate(vector, interrupt[0]); /* - * Subtle, code in do_timer_interrupt() expects an AEOI - * mode for the 8259A whenever interrupts are routed - * through I/O APICs. Also IRQ0 has to be enabled in - * the 8259A which implies the virtual wire has to be - * disabled in the local APIC. + * As IRQ0 is to be enabled in the 8259A, the virtual + * wire has to be disabled in the local APIC. Also + * timer interrupts need to be acknowledged manually in + * the 8259A for the i82489DX when using the NMI + * watchdog as that APIC treats NMIs as level-triggered. + * The AEOI mode will finish them in the 8259A + * automatically. */ apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); init_8259A(1); - timer_ack = 1; - if (timer_over_8254 > 0) - enable_8259A_irq(0); + timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver)); pin1 = find_isa_irq_pin(0, mp_INT); apic1 = find_isa_irq_apic(0, mp_INT); @@ -2162,14 +2159,33 @@ static inline void __init check_timer(void) printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", vector, apic1, pin1, apic2, pin2); + /* + * Some BIOS writers are clueless and report the ExtINTA + * I/O APIC input from the cascaded 8259A as the timer + * interrupt input. So just in case, if only one pin + * was found above, try it both directly and through the + * 8259A. + */ + if (pin1 == -1) { + pin1 = pin2; + apic1 = apic2; + no_pin1 = 1; + } else if (pin2 == -1) { + pin2 = pin1; + apic2 = apic1; + } + if (pin1 != -1) { /* * Ok, does IRQ0 through the IOAPIC work? */ + if (no_pin1) { + add_pin_to_irq(0, apic1, pin1); + setup_timer_IRQ0_pin(apic1, pin1, vector); + } unmask_IO_APIC_irq(0); if (timer_irq_works()) { if (nmi_watchdog == NMI_IO_APIC) { - disable_8259A_irq(0); setup_nmi(); enable_8259A_irq(0); } @@ -2178,43 +2194,46 @@ static inline void __init check_timer(void) goto out; } clear_IO_APIC_pin(apic1, pin1); - printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to " - "IO-APIC\n"); - } + if (!no_pin1) + printk(KERN_ERR "..MP-BIOS bug: " + "8254 timer not connected to IO-APIC\n"); - printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... "); - if (pin2 != -1) { + printk(KERN_INFO "...trying to set up timer (IRQ0) " + "through the 8259A ... "); printk("\n..... (found pin %d) ...", pin2); /* * legacy devices should be connected to IO APIC #0 */ - setup_ExtINT_IRQ0_pin(apic2, pin2, vector); + replace_pin_at_irq(0, apic1, pin1, apic2, pin2); + setup_timer_IRQ0_pin(apic2, pin2, vector); + unmask_IO_APIC_irq(0); + enable_8259A_irq(0); if (timer_irq_works()) { printk("works.\n"); - if (pin1 != -1) - replace_pin_at_irq(0, apic1, pin1, apic2, pin2); - else - add_pin_to_irq(0, apic2, pin2); + timer_through_8259 = 1; if (nmi_watchdog == NMI_IO_APIC) { + disable_8259A_irq(0); setup_nmi(); + enable_8259A_irq(0); } goto out; } /* * Cleanup, just in case ... */ + disable_8259A_irq(0); clear_IO_APIC_pin(apic2, pin2); + printk(" failed.\n"); } - printk(" failed.\n"); if (nmi_watchdog == NMI_IO_APIC) { printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); - nmi_watchdog = 0; + nmi_watchdog = NMI_NONE; } + timer_ack = 0; printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); - disable_8259A_irq(0); set_irq_chip_and_handler_name(0, &lapic_chip, handle_fasteoi_irq, "fasteoi"); apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */ @@ -2224,12 +2243,12 @@ static inline void __init check_timer(void) printk(" works.\n"); goto out; } + disable_8259A_irq(0); apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector); printk(" failed.\n"); printk(KERN_INFO "...trying to set up timer as ExtINT IRQ..."); - timer_ack = 0; init_8259A(0); make_8259A_irq(0); apic_write_around(APIC_LVT0, APIC_DM_EXTINT); @@ -2286,28 +2305,14 @@ void __init setup_IO_APIC(void) print_IO_APIC(); } -static int __init setup_disable_8254_timer(char *s) -{ - timer_over_8254 = -1; - return 1; -} -static int __init setup_enable_8254_timer(char *s) -{ - timer_over_8254 = 2; - return 1; -} - -__setup("disable_8254_timer", setup_disable_8254_timer); -__setup("enable_8254_timer", setup_enable_8254_timer); - /* * Called after all the initialization is done. If we didnt find any * APIC bugs then we can allow the modify fast path */ - + static int __init io_apic_bug_finalize(void) { - if(sis_apic_bug == -1) + if (sis_apic_bug == -1) sis_apic_bug = 0; return 0; } @@ -2318,17 +2323,17 @@ struct sysfs_ioapic_data { struct sys_device dev; struct IO_APIC_route_entry entry[0]; }; -static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS]; +static struct sysfs_ioapic_data *mp_ioapic_data[MAX_IO_APICS]; static int ioapic_suspend(struct sys_device *dev, pm_message_t state) { struct IO_APIC_route_entry *entry; struct sysfs_ioapic_data *data; int i; - + data = container_of(dev, struct sysfs_ioapic_data, dev); entry = data->entry; - for (i = 0; i < nr_ioapic_registers[dev->id]; i ++) + for (i = 0; i < nr_ioapic_registers[dev->id]; i++) entry[i] = ioapic_read_entry(dev->id, i); return 0; @@ -2341,7 +2346,7 @@ static int ioapic_resume(struct sys_device *dev) unsigned long flags; union IO_APIC_reg_00 reg_00; int i; - + data = container_of(dev, struct sysfs_ioapic_data, dev); entry = data->entry; @@ -2352,7 +2357,7 @@ static int ioapic_resume(struct sys_device *dev) io_apic_write(dev->id, 0, reg_00.raw); } spin_unlock_irqrestore(&ioapic_lock, flags); - for (i = 0; i < nr_ioapic_registers[dev->id]; i ++) + for (i = 0; i < nr_ioapic_registers[dev->id]; i++) ioapic_write_entry(dev->id, i, entry[i]); return 0; @@ -2366,24 +2371,23 @@ static struct sysdev_class ioapic_sysdev_class = { static int __init ioapic_init_sysfs(void) { - struct sys_device * dev; + struct sys_device *dev; int i, size, error = 0; error = sysdev_class_register(&ioapic_sysdev_class); if (error) return error; - for (i = 0; i < nr_ioapics; i++ ) { - size = sizeof(struct sys_device) + nr_ioapic_registers[i] + for (i = 0; i < nr_ioapics; i++) { + size = sizeof(struct sys_device) + nr_ioapic_registers[i] * sizeof(struct IO_APIC_route_entry); - mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL); + mp_ioapic_data[i] = kzalloc(size, GFP_KERNEL); if (!mp_ioapic_data[i]) { printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); continue; } - memset(mp_ioapic_data[i], 0, size); dev = &mp_ioapic_data[i]->dev; - dev->id = i; + dev->id = i; dev->cls = &ioapic_sysdev_class; error = sysdev_register(dev); if (error) { @@ -2458,7 +2462,7 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms msg->address_lo = MSI_ADDR_BASE_LO | ((INT_DEST_MODE == 0) ? - MSI_ADDR_DEST_MODE_PHYSICAL: +MSI_ADDR_DEST_MODE_PHYSICAL: MSI_ADDR_DEST_MODE_LOGICAL) | ((INT_DELIVERY_MODE != dest_LowestPrio) ? MSI_ADDR_REDIRECTION_CPU: @@ -2469,7 +2473,7 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms MSI_DATA_TRIGGER_EDGE | MSI_DATA_LEVEL_ASSERT | ((INT_DELIVERY_MODE != dest_LowestPrio) ? - MSI_DATA_DELIVERY_FIXED: +MSI_DATA_DELIVERY_FIXED: MSI_DATA_DELIVERY_LOWPRI) | MSI_DATA_VECTOR(vector); } @@ -2640,12 +2644,12 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) #endif /* CONFIG_HT_IRQ */ /* -------------------------------------------------------------------------- - ACPI-based IOAPIC Configuration + ACPI-based IOAPIC Configuration -------------------------------------------------------------------------- */ #ifdef CONFIG_ACPI -int __init io_apic_get_unique_id (int ioapic, int apic_id) +int __init io_apic_get_unique_id(int ioapic, int apic_id) { union IO_APIC_reg_00 reg_00; static physid_mask_t apic_id_map = PHYSID_MASK_NONE; @@ -2654,10 +2658,10 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) int i = 0; /* - * The P4 platform supports up to 256 APIC IDs on two separate APIC - * buses (one for LAPICs, one for IOAPICs), where predecessors only + * The P4 platform supports up to 256 APIC IDs on two separate APIC + * buses (one for LAPICs, one for IOAPICs), where predecessors only * supports up to 16 on one shared APIC bus. - * + * * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full * advantage of new APIC bus architecture. */ @@ -2676,7 +2680,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) } /* - * Every APIC in a system must have a unique ID or we get lots of nice + * Every APIC in a system must have a unique ID or we get lots of nice * 'stuck on smp_invalidate_needed IPI wait' messages. */ if (check_apicid_used(apic_id_map, apic_id)) { @@ -2693,7 +2697,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) "trying %d\n", ioapic, apic_id, i); apic_id = i; - } + } tmp = apicid_to_cpu_present(apic_id); physids_or(apic_id_map, apic_id_map, tmp); @@ -2720,7 +2724,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) } -int __init io_apic_get_version (int ioapic) +int __init io_apic_get_version(int ioapic) { union IO_APIC_reg_01 reg_01; unsigned long flags; @@ -2733,7 +2737,7 @@ int __init io_apic_get_version (int ioapic) } -int __init io_apic_get_redir_entries (int ioapic) +int __init io_apic_get_redir_entries(int ioapic) { union IO_APIC_reg_01 reg_01; unsigned long flags; @@ -2746,7 +2750,7 @@ int __init io_apic_get_redir_entries (int ioapic) } -int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low) +int io_apic_set_pci_routing(int ioapic, int pin, int irq, int edge_level, int active_high_low) { struct IO_APIC_route_entry entry; @@ -2762,7 +2766,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a * corresponding device driver registers for this IRQ. */ - memset(&entry,0,sizeof(entry)); + memset(&entry, 0, sizeof(entry)); entry.delivery_mode = INT_DELIVERY_MODE; entry.dest_mode = INT_DEST_MODE; diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index ef1a8df..e5ef603 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -61,7 +61,7 @@ struct irq_cfg { }; /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */ -struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = { +static struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = { [0] = { .domain = CPU_MASK_ALL, .vector = IRQ0_VECTOR, }, [1] = { .domain = CPU_MASK_ALL, .vector = IRQ1_VECTOR, }, [2] = { .domain = CPU_MASK_ALL, .vector = IRQ2_VECTOR, }, @@ -90,7 +90,7 @@ static int no_timer_check; static int disable_timer_pin_1 __initdata; -int timer_over_8254 __initdata = 1; +int timer_through_8259 __initdata; /* Where if anywhere is the i8259 connect in external int mode */ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; @@ -183,7 +183,7 @@ static bool io_apic_level_ack_pending(unsigned int irq) break; reg = io_apic_read(entry->apic, 0x10 + pin*2); /* Is the remote IRR bit set? */ - if ((reg >> 14) & 1) { + if (reg & IO_APIC_REDIR_REMOTE_IRR) { spin_unlock_irqrestore(&ioapic_lock, flags); return true; } @@ -298,7 +298,7 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector) break; io_apic_write(apic, 0x11 + pin*2, dest); reg = io_apic_read(apic, 0x10 + pin*2); - reg &= ~0x000000ff; + reg &= ~IO_APIC_REDIR_VECTOR_MASK; reg |= vector; io_apic_modify(apic, reg); if (!entry->next) @@ -360,16 +360,37 @@ static void add_pin_to_irq(unsigned int irq, int apic, int pin) entry->pin = pin; } +/* + * Reroute an IRQ to a different pin. + */ +static void __init replace_pin_at_irq(unsigned int irq, + int oldapic, int oldpin, + int newapic, int newpin) +{ + struct irq_pin_list *entry = irq_2_pin + irq; + + while (1) { + if (entry->apic == oldapic && entry->pin == oldpin) { + entry->apic = newapic; + entry->pin = newpin; + } + if (!entry->next) + break; + entry = irq_2_pin + entry->next; + } +} + #define DO_ACTION(name,R,ACTION, FINAL) \ \ static void name##_IO_APIC_irq (unsigned int irq) \ __DO_ACTION(R, ACTION, FINAL) -DO_ACTION( __mask, 0, |= 0x00010000, io_apic_sync(entry->apic) ) - /* mask = 1 */ -DO_ACTION( __unmask, 0, &= 0xfffeffff, ) - /* mask = 0 */ +/* mask = 1 */ +DO_ACTION(__mask, 0, |= IO_APIC_REDIR_MASKED, io_apic_sync(entry->apic)) + +/* mask = 0 */ +DO_ACTION(__unmask, 0, &= ~IO_APIC_REDIR_MASKED, ) static void mask_IO_APIC_irq (unsigned int irq) { @@ -430,20 +451,6 @@ static int __init disable_timer_pin_setup(char *arg) } __setup("disable_timer_pin_1", disable_timer_pin_setup); -static int __init setup_disable_8254_timer(char *s) -{ - timer_over_8254 = -1; - return 1; -} -static int __init setup_enable_8254_timer(char *s) -{ - timer_over_8254 = 2; - return 1; -} - -__setup("disable_8254_timer", setup_disable_8254_timer); -__setup("enable_8254_timer", setup_enable_8254_timer); - /* * Find the IRQ entry number of a certain pin. @@ -911,26 +918,21 @@ static void __init setup_IO_APIC_irqs(void) } /* - * Set up the 8259A-master output pin as broadcast to all - * CPUs. + * Set up the timer pin, possibly with the 8259A-master behind. */ -static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector) +static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin, + int vector) { struct IO_APIC_route_entry entry; memset(&entry, 0, sizeof(entry)); - disable_8259A_irq(0); - - /* mask LVT0 */ - apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); - /* * We use logical delivery to get the timer IRQ * to the first CPU. */ entry.dest_mode = INT_DEST_MODE; - entry.mask = 0; /* unmask IRQ now */ + entry.mask = 1; /* mask IRQ now */ entry.dest = cpu_mask_to_apicid(TARGET_CPUS); entry.delivery_mode = INT_DELIVERY_MODE; entry.polarity = 0; @@ -939,7 +941,7 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in /* * The timer IRQ doesn't have to know that behind the - * scene we have a 8259A-master in AEOI mode ... + * scene we may have a 8259A-master in AEOI mode ... */ set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge"); @@ -947,8 +949,6 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in * Add it to the IO-APIC irq-routing table: */ ioapic_write_entry(apic, pin, entry); - - enable_8259A_irq(0); } void __apicdebuginit print_IO_APIC(void) @@ -1077,6 +1077,7 @@ void __apicdebuginit print_local_APIC(void * dummy) printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", smp_processor_id(), hard_smp_processor_id()); + v = apic_read(APIC_ID); printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(read_apic_id())); v = apic_read(APIC_LVR); printk(KERN_INFO "... APIC VERSION: %08x\n", v); @@ -1659,6 +1660,7 @@ static inline void __init check_timer(void) struct irq_cfg *cfg = irq_cfg + 0; int apic1, pin1, apic2, pin2; unsigned long flags; + int no_pin1 = 0; local_irq_save(flags); @@ -1669,16 +1671,11 @@ static inline void __init check_timer(void) assign_irq_vector(0, TARGET_CPUS); /* - * Subtle, code in do_timer_interrupt() expects an AEOI - * mode for the 8259A whenever interrupts are routed - * through I/O APICs. Also IRQ0 has to be enabled in - * the 8259A which implies the virtual wire has to be - * disabled in the local APIC. + * As IRQ0 is to be enabled in the 8259A, the virtual + * wire has to be disabled in the local APIC. */ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); init_8259A(1); - if (timer_over_8254 > 0) - enable_8259A_irq(0); pin1 = find_isa_irq_pin(0, mp_INT); apic1 = find_isa_irq_apic(0, mp_INT); @@ -1688,15 +1685,39 @@ static inline void __init check_timer(void) apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", cfg->vector, apic1, pin1, apic2, pin2); + /* + * Some BIOS writers are clueless and report the ExtINTA + * I/O APIC input from the cascaded 8259A as the timer + * interrupt input. So just in case, if only one pin + * was found above, try it both directly and through the + * 8259A. + */ + if (pin1 == -1) { + pin1 = pin2; + apic1 = apic2; + no_pin1 = 1; + } else if (pin2 == -1) { + pin2 = pin1; + apic2 = apic1; + } + + replace_pin_at_irq(0, 0, 0, apic1, pin1); + apic1 = 0; + pin1 = 0; + setup_timer_IRQ0_pin(apic1, pin1, cfg->vector); + if (pin1 != -1) { /* * Ok, does IRQ0 through the IOAPIC work? */ + if (no_pin1) { + add_pin_to_irq(0, apic1, pin1); + setup_timer_IRQ0_pin(apic1, pin1, cfg->vector); + } unmask_IO_APIC_irq(0); if (!no_timer_check && timer_irq_works()) { nmi_watchdog_default(); if (nmi_watchdog == NMI_IO_APIC) { - disable_8259A_irq(0); setup_nmi(); enable_8259A_irq(0); } @@ -1705,42 +1726,48 @@ static inline void __init check_timer(void) goto out; } clear_IO_APIC_pin(apic1, pin1); - apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not " - "connected to IO-APIC\n"); - } + if (!no_pin1) + apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: " + "8254 timer not connected to IO-APIC\n"); - apic_printk(APIC_VERBOSE,KERN_INFO "...trying to set up timer (IRQ0) " - "through the 8259A ... "); - if (pin2 != -1) { + apic_printk(APIC_VERBOSE,KERN_INFO + "...trying to set up timer (IRQ0) " + "through the 8259A ... "); apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...", apic2, pin2); /* * legacy devices should be connected to IO APIC #0 */ - setup_ExtINT_IRQ0_pin(apic2, pin2, cfg->vector); + replace_pin_at_irq(0, apic1, pin1, apic2, pin2); + setup_timer_IRQ0_pin(apic2, pin2, cfg->vector); + unmask_IO_APIC_irq(0); + enable_8259A_irq(0); if (timer_irq_works()) { apic_printk(APIC_VERBOSE," works.\n"); + timer_through_8259 = 1; nmi_watchdog_default(); if (nmi_watchdog == NMI_IO_APIC) { + disable_8259A_irq(0); setup_nmi(); + enable_8259A_irq(0); } goto out; } /* * Cleanup, just in case ... */ + disable_8259A_irq(0); clear_IO_APIC_pin(apic2, pin2); + apic_printk(APIC_VERBOSE," failed.\n"); } - apic_printk(APIC_VERBOSE," failed.\n"); if (nmi_watchdog == NMI_IO_APIC) { printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); - nmi_watchdog = 0; + nmi_watchdog = NMI_NONE; } apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); - disable_8259A_irq(0); irq_desc[0].chip = &lapic_irq_type; apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */ enable_8259A_irq(0); @@ -1749,6 +1776,7 @@ static inline void __init check_timer(void) apic_printk(APIC_VERBOSE," works.\n"); goto out; } + disable_8259A_irq(0); apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector); apic_printk(APIC_VERBOSE," failed.\n"); diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c index c0df7b8..9d98cda 100644 --- a/arch/x86/kernel/ipi.c +++ b/arch/x86/kernel/ipi.c @@ -8,7 +8,6 @@ #include <linux/kernel_stat.h> #include <linux/mc146818rtc.h> #include <linux/cache.h> -#include <linux/interrupt.h> #include <linux/cpu.h> #include <linux/module.h> diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index 147352d..468acd0 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -313,16 +313,20 @@ skip: per_cpu(irq_stat,j).irq_tlb_count); seq_printf(p, " TLB shootdowns\n"); #endif +#ifdef CONFIG_X86_MCE seq_printf(p, "TRM: "); for_each_online_cpu(j) seq_printf(p, "%10u ", per_cpu(irq_stat,j).irq_thermal_count); seq_printf(p, " Thermal event interrupts\n"); +#endif +#ifdef CONFIG_X86_LOCAL_APIC seq_printf(p, "SPU: "); for_each_online_cpu(j) seq_printf(p, "%10u ", per_cpu(irq_stat,j).irq_spurious_count); seq_printf(p, " Spurious interrupts\n"); +#endif seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); #if defined(CONFIG_X86_IO_APIC) seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count)); @@ -331,6 +335,40 @@ skip: return 0; } +/* + * /proc/stat helpers + */ +u64 arch_irq_stat_cpu(unsigned int cpu) +{ + u64 sum = nmi_count(cpu); + +#ifdef CONFIG_X86_LOCAL_APIC + sum += per_cpu(irq_stat, cpu).apic_timer_irqs; +#endif +#ifdef CONFIG_SMP + sum += per_cpu(irq_stat, cpu).irq_resched_count; + sum += per_cpu(irq_stat, cpu).irq_call_count; + sum += per_cpu(irq_stat, cpu).irq_tlb_count; +#endif +#ifdef CONFIG_X86_MCE + sum += per_cpu(irq_stat, cpu).irq_thermal_count; +#endif +#ifdef CONFIG_X86_LOCAL_APIC + sum += per_cpu(irq_stat, cpu).irq_spurious_count; +#endif + return sum; +} + +u64 arch_irq_stat(void) +{ + u64 sum = atomic_read(&irq_err_count); + +#ifdef CONFIG_X86_IO_APIC + sum += atomic_read(&irq_mis_count); +#endif + return sum; +} + #ifdef CONFIG_HOTPLUG_CPU #include <mach_apic.h> diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c index 3aac154..1f78b23 100644 --- a/arch/x86/kernel/irq_64.c +++ b/arch/x86/kernel/irq_64.c @@ -135,6 +135,7 @@ skip: seq_printf(p, "%10u ", cpu_pda(j)->irq_tlb_count); seq_printf(p, " TLB shootdowns\n"); #endif +#ifdef CONFIG_X86_MCE seq_printf(p, "TRM: "); for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_thermal_count); @@ -143,6 +144,7 @@ skip: for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_threshold_count); seq_printf(p, " Threshold APIC interrupts\n"); +#endif seq_printf(p, "SPU: "); for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_spurious_count); @@ -153,6 +155,32 @@ skip: } /* + * /proc/stat helpers + */ +u64 arch_irq_stat_cpu(unsigned int cpu) +{ + u64 sum = cpu_pda(cpu)->__nmi_count; + + sum += cpu_pda(cpu)->apic_timer_irqs; +#ifdef CONFIG_SMP + sum += cpu_pda(cpu)->irq_resched_count; + sum += cpu_pda(cpu)->irq_call_count; + sum += cpu_pda(cpu)->irq_tlb_count; +#endif +#ifdef CONFIG_X86_MCE + sum += cpu_pda(cpu)->irq_thermal_count; + sum += cpu_pda(cpu)->irq_threshold_count; +#endif + sum += cpu_pda(cpu)->irq_spurious_count; + return sum; +} + +u64 arch_irq_stat(void) +{ + return atomic_read(&irq_err_count); +} + +/* * do_IRQ handles all normal device IRQ's (the special * SMP cross-CPU interrupts have their own specific * handlers). diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c new file mode 100644 index 0000000..d669142 --- /dev/null +++ b/arch/x86/kernel/irqinit_32.c @@ -0,0 +1,114 @@ +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/random.h> +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/sysdev.h> +#include <linux/bitops.h> + +#include <asm/atomic.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/timer.h> +#include <asm/pgtable.h> +#include <asm/delay.h> +#include <asm/desc.h> +#include <asm/apic.h> +#include <asm/arch_hooks.h> +#include <asm/i8259.h> + + + +/* + * Note that on a 486, we don't want to do a SIGFPE on an irq13 + * as the irq is unreliable, and exception 16 works correctly + * (ie as explained in the intel literature). On a 386, you + * can't use exception 16 due to bad IBM design, so we have to + * rely on the less exact irq13. + * + * Careful.. Not only is IRQ13 unreliable, but it is also + * leads to races. IBM designers who came up with it should + * be shot. + */ + + +static irqreturn_t math_error_irq(int cpl, void *dev_id) +{ + extern void math_error(void __user *); + outb(0,0xF0); + if (ignore_fpu_irq || !boot_cpu_data.hard_math) + return IRQ_NONE; + math_error((void __user *)get_irq_regs()->ip); + return IRQ_HANDLED; +} + +/* + * New motherboards sometimes make IRQ 13 be a PCI interrupt, + * so allow interrupt sharing. + */ +static struct irqaction fpu_irq = { + .handler = math_error_irq, + .mask = CPU_MASK_NONE, + .name = "fpu", +}; + +void __init init_ISA_irqs (void) +{ + int i; + +#ifdef CONFIG_X86_LOCAL_APIC + init_bsp_APIC(); +#endif + init_8259A(0); + + /* + * 16 old-style INTA-cycle interrupts: + */ + for (i = 0; i < 16; i++) { + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } +} + +/* Overridden in paravirt.c */ +void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); + +void __init native_init_IRQ(void) +{ + int i; + + /* all the set up before the call gates are initialised */ + pre_intr_init_hook(); + + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { + int vector = FIRST_EXTERNAL_VECTOR + i; + if (i >= NR_IRQS) + break; + /* SYSCALL_VECTOR was reserved in trap_init. */ + if (!test_bit(vector, used_vectors)) + set_intr_gate(vector, interrupt[i]); + } + + /* setup after call gates are initialised (usually add in + * the architecture specific gates) + */ + intr_init_hook(); + + /* + * External FPU? Set up irq13 if so, for + * original braindamaged IBM FERR coupling. + */ + if (boot_cpu_data.hard_math && !cpu_has_fpu) + setup_irq(FPU_IRQ, &fpu_irq); + + irq_ctx_init(smp_processor_id()); +} diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c new file mode 100644 index 0000000..64bc0f1 --- /dev/null +++ b/arch/x86/kernel/irqinit_64.c @@ -0,0 +1,203 @@ +#include <linux/linkage.h> +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/timex.h> +#include <linux/slab.h> +#include <linux/random.h> +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/sysdev.h> +#include <linux/bitops.h> + +#include <asm/acpi.h> +#include <asm/atomic.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/hw_irq.h> +#include <asm/pgtable.h> +#include <asm/delay.h> +#include <asm/desc.h> +#include <asm/apic.h> +#include <asm/i8259.h> + +/* + * Common place to define all x86 IRQ vectors + * + * This builds up the IRQ handler stubs using some ugly macros in irq.h + * + * These macros create the low-level assembly IRQ routines that save + * register context and call do_IRQ(). do_IRQ() then does all the + * operations that are needed to keep the AT (or SMP IOAPIC) + * interrupt-controller happy. + */ + +#define BI(x,y) \ + BUILD_IRQ(x##y) + +#define BUILD_16_IRQS(x) \ + BI(x,0) BI(x,1) BI(x,2) BI(x,3) \ + BI(x,4) BI(x,5) BI(x,6) BI(x,7) \ + BI(x,8) BI(x,9) BI(x,a) BI(x,b) \ + BI(x,c) BI(x,d) BI(x,e) BI(x,f) + +/* + * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: + * (these are usually mapped to vectors 0x30-0x3f) + */ + +/* + * The IO-APIC gives us many more interrupt sources. Most of these + * are unused but an SMP system is supposed to have enough memory ... + * sometimes (mostly wrt. hw bugs) we get corrupted vectors all + * across the spectrum, so we really want to be prepared to get all + * of these. Plus, more powerful systems might have more than 64 + * IO-APIC registers. + * + * (these are usually mapped into the 0x30-0xff vector range) + */ + BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3) +BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7) +BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb) +BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf) + +#undef BUILD_16_IRQS +#undef BI + + +#define IRQ(x,y) \ + IRQ##x##y##_interrupt + +#define IRQLIST_16(x) \ + IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \ + IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \ + IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \ + IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f) + +/* for the irq vectors */ +static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = { + IRQLIST_16(0x2), IRQLIST_16(0x3), + IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7), + IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb), + IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf) +}; + +#undef IRQ +#undef IRQLIST_16 + + + + +/* + * IRQ2 is cascade interrupt to second interrupt controller + */ + +static struct irqaction irq2 = { + .handler = no_action, + .mask = CPU_MASK_NONE, + .name = "cascade", +}; +DEFINE_PER_CPU(vector_irq_t, vector_irq) = { + [0 ... IRQ0_VECTOR - 1] = -1, + [IRQ0_VECTOR] = 0, + [IRQ1_VECTOR] = 1, + [IRQ2_VECTOR] = 2, + [IRQ3_VECTOR] = 3, + [IRQ4_VECTOR] = 4, + [IRQ5_VECTOR] = 5, + [IRQ6_VECTOR] = 6, + [IRQ7_VECTOR] = 7, + [IRQ8_VECTOR] = 8, + [IRQ9_VECTOR] = 9, + [IRQ10_VECTOR] = 10, + [IRQ11_VECTOR] = 11, + [IRQ12_VECTOR] = 12, + [IRQ13_VECTOR] = 13, + [IRQ14_VECTOR] = 14, + [IRQ15_VECTOR] = 15, + [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 +}; + +static void __init init_ISA_irqs (void) +{ + int i; + + init_bsp_APIC(); + init_8259A(0); + + for (i = 0; i < NR_IRQS; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = NULL; + irq_desc[i].depth = 1; + + if (i < 16) { + /* + * 16 old-style INTA-cycle interrupts: + */ + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } else { + /* + * 'high' PCI IRQs filled in on demand + */ + irq_desc[i].chip = &no_irq_chip; + } + } +} + +void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); + +void __init native_init_IRQ(void) +{ + int i; + + init_ISA_irqs(); + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { + int vector = FIRST_EXTERNAL_VECTOR + i; + if (vector != IA32_SYSCALL_VECTOR) + set_intr_gate(vector, interrupt[i]); + } + +#ifdef CONFIG_SMP + /* + * The reschedule interrupt is a CPU-to-CPU reschedule-helper + * IPI, driven by wakeup. + */ + set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + + /* IPIs for invalidation */ + set_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); + + /* IPI for generic function call */ + set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + + /* Low priority IPI to cleanup after moving an irq */ + set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); +#endif + set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); + set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); + + /* self generated IPI for local APIC timer */ + set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + + /* IPI vectors for APIC spurious and error interrupts */ + set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); + + if (!acpi_ioapic) + setup_irq(2, &irq2); +} diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c index 0224c36..21f2bae 100644 --- a/arch/x86/kernel/ldt.c +++ b/arch/x86/kernel/ldt.c @@ -20,9 +20,9 @@ #include <asm/mmu_context.h> #ifdef CONFIG_SMP -static void flush_ldt(void *null) +static void flush_ldt(void *current_mm) { - if (current->active_mm) + if (current->active_mm == current_mm) load_LDT(¤t->active_mm->context); } #endif @@ -68,7 +68,7 @@ static int alloc_ldt(mm_context_t *pc, int mincount, int reload) load_LDT(pc); mask = cpumask_of_cpu(smp_processor_id()); if (!cpus_equal(current->mm->cpu_vm_mask, mask)) - smp_call_function(flush_ldt, NULL, 1, 1); + smp_call_function(flush_ldt, current->mm, 1, 1); preempt_enable(); #else load_LDT(pc); diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c index d0b234c..f496017 100644 --- a/arch/x86/kernel/machine_kexec_32.c +++ b/arch/x86/kernel/machine_kexec_32.c @@ -39,7 +39,7 @@ static void set_idt(void *newidt, __u16 limit) curidt.address = (unsigned long)newidt; load_idt(&curidt); -}; +} static void set_gdt(void *newgdt, __u16 limit) @@ -51,7 +51,7 @@ static void set_gdt(void *newgdt, __u16 limit) curgdt.address = (unsigned long)newgdt; load_gdt(&curgdt); -}; +} static void load_segments(void) { diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c index 69729e3..9758fea 100644 --- a/arch/x86/kernel/microcode.c +++ b/arch/x86/kernel/microcode.c @@ -5,13 +5,14 @@ * 2006 Shaohua Li <shaohua.li@intel.com> * * This driver allows to upgrade microcode on Intel processors - * belonging to IA-32 family - PentiumPro, Pentium II, + * belonging to IA-32 family - PentiumPro, Pentium II, * Pentium III, Xeon, Pentium 4, etc. * - * Reference: Section 8.10 of Volume III, Intel Pentium 4 Manual, - * Order Number 245472 or free download from: - * - * http://developer.intel.com/design/pentium4/manuals/245472.htm + * Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture + * Software Developer's Manual + * Order Number 253668 or free download from: + * + * http://developer.intel.com/design/pentium4/manuals/253668.htm * * For more information, go to http://www.urbanmyth.org/microcode * @@ -58,12 +59,12 @@ * nature of implementation. * 1.11 22 Mar 2002 Tigran Aivazian <tigran@veritas.com> * Fix the panic when writing zero-length microcode chunk. - * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>, + * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>, * Jun Nakajima <jun.nakajima@intel.com> * Support for the microcode updates in the new format. * 1.13 10 Oct 2003 Tigran Aivazian <tigran@veritas.com> * Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl - * because we no longer hold a copy of applied microcode + * because we no longer hold a copy of applied microcode * in kernel memory. * 1.14 25 Jun 2004 Tigran Aivazian <tigran@veritas.com> * Fix sigmatch() macro to handle old CPUs with pf == 0. @@ -320,11 +321,11 @@ static void apply_microcode(int cpu) return; /* serialize access to the physical write to MSR 0x79 */ - spin_lock_irqsave(µcode_update_lock, flags); + spin_lock_irqsave(µcode_update_lock, flags); /* write microcode via MSR 0x79 */ wrmsr(MSR_IA32_UCODE_WRITE, - (unsigned long) uci->mc->bits, + (unsigned long) uci->mc->bits, (unsigned long) uci->mc->bits >> 16 >> 16); wrmsr(MSR_IA32_UCODE_REV, 0, 0); @@ -341,7 +342,7 @@ static void apply_microcode(int cpu) return; } printk(KERN_INFO "microcode: CPU%d updated from revision " - "0x%x to 0x%x, date = %08x \n", + "0x%x to 0x%x, date = %08x \n", cpu_num, uci->rev, val[1], uci->mc->hdr.date); uci->rev = val[1]; } @@ -534,7 +535,7 @@ static int cpu_request_microcode(int cpu) c->x86, c->x86_model, c->x86_mask); error = request_firmware(&firmware, name, µcode_pdev->dev); if (error) { - pr_debug("microcode: ucode data file %s load failed\n", name); + pr_debug("microcode: data file %s load failed\n", name); return error; } buf = firmware->data; @@ -805,6 +806,9 @@ static int __init microcode_init (void) { int error; + printk(KERN_INFO + "IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@aivazian.fsnet.co.uk>\n"); + error = microcode_dev_init(); if (error) return error; @@ -825,9 +829,6 @@ static int __init microcode_init (void) } register_hotcpu_notifier(&mc_cpu_notifier); - - printk(KERN_INFO - "IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@aivazian.fsnet.co.uk>\n"); return 0; } diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c index edc5fbf..fdfdc55 100644 --- a/arch/x86/kernel/mmconf-fam10h_64.c +++ b/arch/x86/kernel/mmconf-fam10h_64.c @@ -12,6 +12,7 @@ #include <asm/io.h> #include <asm/msr.h> #include <asm/acpi.h> +#include <asm/mmconfig.h> #include "../pci/pci.h" diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index 84160f7..6580dae 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -24,8 +24,11 @@ #include <linux/kdebug.h> #include <linux/slab.h> +#include <asm/i8259.h> +#include <asm/io_apic.h> #include <asm/smp.h> #include <asm/nmi.h> +#include <asm/timer.h> #include "mach_traps.h" @@ -81,7 +84,7 @@ int __init check_nmi_watchdog(void) prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); if (!prev_nmi_count) - return -1; + goto error; printk(KERN_INFO "Testing NMI watchdog ... "); @@ -118,7 +121,7 @@ int __init check_nmi_watchdog(void) if (!atomic_read(&nmi_active)) { kfree(prev_nmi_count); atomic_set(&nmi_active, -1); - return -1; + goto error; } printk("OK.\n"); @@ -129,6 +132,12 @@ int __init check_nmi_watchdog(void) kfree(prev_nmi_count); return 0; +error: + if (nmi_watchdog == NMI_IO_APIC && !timer_through_8259) + disable_8259A_irq(0); + timer_ack = 0; + + return -1; } static int __init setup_nmi_watchdog(char *str) diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index 5a29ded..0060e44 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -21,6 +21,8 @@ #include <linux/cpumask.h> #include <linux/kdebug.h> +#include <asm/i8259.h> +#include <asm/io_apic.h> #include <asm/smp.h> #include <asm/nmi.h> #include <asm/proto.h> @@ -90,7 +92,7 @@ int __init check_nmi_watchdog(void) prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); if (!prev_nmi_count) - return -1; + goto error; printk(KERN_INFO "Testing NMI watchdog ... "); @@ -121,7 +123,7 @@ int __init check_nmi_watchdog(void) if (!atomic_read(&nmi_active)) { kfree(prev_nmi_count); atomic_set(&nmi_active, -1); - return -1; + goto error; } printk("OK.\n"); @@ -132,6 +134,11 @@ int __init check_nmi_watchdog(void) kfree(prev_nmi_count); return 0; +error: + if (nmi_watchdog == NMI_IO_APIC && !timer_through_8259) + disable_8259A_irq(0); + + return -1; } static int __init setup_nmi_watchdog(char *str) diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index 74f0c5e..f1ab0f7 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -380,6 +380,9 @@ struct pv_mmu_ops pv_mmu_ops = { .pte_update = paravirt_nop, .pte_update_defer = paravirt_nop, + .ptep_modify_prot_start = __ptep_modify_prot_start, + .ptep_modify_prot_commit = __ptep_modify_prot_commit, + #ifdef CONFIG_HIGHPTE .kmap_atomic_pte = kmap_atomic, #endif @@ -403,6 +406,7 @@ struct pv_mmu_ops pv_mmu_ops = { #endif /* PAGETABLE_LEVELS >= 3 */ .pte_val = native_pte_val, + .pte_flags = native_pte_val, .pgd_val = native_pgd_val, .make_pte = native_make_pte, diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index dc00a13..3c43109 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -77,10 +77,14 @@ void __init dma32_reserve_bootmem(void) if (end_pfn <= MAX_DMA32_PFN) return; + /* + * check aperture_64.c allocate_aperture() for reason about + * using 512M as goal + */ align = 64ULL<<20; size = round_up(dma32_bootmem_size, align); dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align, - __pa(MAX_DMA_ADDRESS)); + 512ULL<<20); if (dma32_bootmem_ptr) dma32_bootmem_size = size; else @@ -88,7 +92,6 @@ void __init dma32_reserve_bootmem(void) } static void __init dma32_free_bootmem(void) { - int node; if (end_pfn <= MAX_DMA32_PFN) return; @@ -96,9 +99,7 @@ static void __init dma32_free_bootmem(void) if (!dma32_bootmem_ptr) return; - for_each_online_node(node) - free_bootmem_node(NODE_DATA(node), __pa(dma32_bootmem_ptr), - dma32_bootmem_size); + free_bootmem(__pa(dma32_bootmem_ptr), dma32_bootmem_size); dma32_bootmem_ptr = NULL; dma32_bootmem_size = 0; @@ -357,7 +358,7 @@ int dma_supported(struct device *dev, u64 mask) EXPORT_SYMBOL(dma_supported); /* Allocate DMA memory on node near device */ -noinline struct page * +static noinline struct page * dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order) { int node; diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index aa8ec92..021f3c6 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -104,7 +104,6 @@ static unsigned long alloc_iommu(struct device *dev, int size) size, base_index, boundary_size, 0); } if (offset != -1) { - set_bit_string(iommu_gart_bitmap, offset, size); next_bit = offset+size; if (next_bit >= iommu_pages) { next_bit = 0; @@ -534,8 +533,8 @@ static __init unsigned read_aperture(struct pci_dev *dev, u32 *size) unsigned aper_size = 0, aper_base_32, aper_order; u64 aper_base; - pci_read_config_dword(dev, 0x94, &aper_base_32); - pci_read_config_dword(dev, 0x90, &aper_order); + pci_read_config_dword(dev, AMD64_GARTAPERTUREBASE, &aper_base_32); + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &aper_order); aper_order = (aper_order >> 1) & 7; aper_base = aper_base_32 & 0x7fff; @@ -549,14 +548,63 @@ static __init unsigned read_aperture(struct pci_dev *dev, u32 *size) return aper_base; } +static void enable_gart_translations(void) +{ + int i; + + for (i = 0; i < num_k8_northbridges; i++) { + struct pci_dev *dev = k8_northbridges[i]; + + enable_gart_translation(dev, __pa(agp_gatt_table)); + } +} + +/* + * If fix_up_north_bridges is set, the north bridges have to be fixed up on + * resume in the same way as they are handled in gart_iommu_hole_init(). + */ +static bool fix_up_north_bridges; +static u32 aperture_order; +static u32 aperture_alloc; + +void set_up_gart_resume(u32 aper_order, u32 aper_alloc) +{ + fix_up_north_bridges = true; + aperture_order = aper_order; + aperture_alloc = aper_alloc; +} + static int gart_resume(struct sys_device *dev) { + printk(KERN_INFO "PCI-DMA: Resuming GART IOMMU\n"); + + if (fix_up_north_bridges) { + int i; + + printk(KERN_INFO "PCI-DMA: Restoring GART aperture settings\n"); + + for (i = 0; i < num_k8_northbridges; i++) { + struct pci_dev *dev = k8_northbridges[i]; + + /* + * Don't enable translations just yet. That is the next + * step. Restore the pre-suspend aperture settings. + */ + pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, + aperture_order << 1); + pci_write_config_dword(dev, AMD64_GARTAPERTUREBASE, + aperture_alloc >> 25); + } + } + + enable_gart_translations(); + return 0; } static int gart_suspend(struct sys_device *dev, pm_message_t state) { - return -EINVAL; + return 0; } static struct sysdev_class gart_sysdev_class = { @@ -614,27 +662,14 @@ static __init int init_k8_gatt(struct agp_kern_info *info) memset(gatt, 0, gatt_size); agp_gatt_table = gatt; - for (i = 0; i < num_k8_northbridges; i++) { - u32 gatt_reg; - u32 ctl; - - dev = k8_northbridges[i]; - gatt_reg = __pa(gatt) >> 12; - gatt_reg <<= 4; - pci_write_config_dword(dev, 0x98, gatt_reg); - pci_read_config_dword(dev, 0x90, &ctl); - - ctl |= 1; - ctl &= ~((1<<4) | (1<<5)); - - pci_write_config_dword(dev, 0x90, ctl); - } + enable_gart_translations(); error = sysdev_class_register(&gart_sysdev_class); if (!error) error = sysdev_register(&device_gart); if (error) panic("Could not register gart_sysdev -- would corrupt data on next suspend"); + flush_gart(); printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n", @@ -677,11 +712,11 @@ void gart_iommu_shutdown(void) u32 ctl; dev = k8_northbridges[i]; - pci_read_config_dword(dev, 0x90, &ctl); + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); - ctl &= ~1; + ctl &= ~GARTEN; - pci_write_config_dword(dev, 0x90, ctl); + pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); } } @@ -788,10 +823,10 @@ void __init gart_iommu_init(void) wbinvd(); /* - * Try to workaround a bug (thanks to BenH) + * Try to workaround a bug (thanks to BenH): * Set unmapped entries to a scratch page instead of 0. * Any prefetches that hit unmapped entries won't get an bus abort - * then. + * then. (P2P bridge may be prefetching on DMA reads). */ scratch = get_zeroed_page(GFP_KERNEL); if (!scratch) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index ba370dc..4061d63 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -6,6 +6,7 @@ #include <linux/sched.h> #include <linux/module.h> #include <linux/pm.h> +#include <linux/clockchips.h> struct kmem_cache *task_xstate_cachep; @@ -45,6 +46,76 @@ void arch_task_cache_init(void) SLAB_PANIC, NULL); } +/* + * Idle related variables and functions + */ +unsigned long boot_option_idle_override = 0; +EXPORT_SYMBOL(boot_option_idle_override); + +/* + * Powermanagement idle function, if any.. + */ +void (*pm_idle)(void); +EXPORT_SYMBOL(pm_idle); + +#ifdef CONFIG_X86_32 +/* + * This halt magic was a workaround for ancient floppy DMA + * wreckage. It should be safe to remove. + */ +static int hlt_counter; +void disable_hlt(void) +{ + hlt_counter++; +} +EXPORT_SYMBOL(disable_hlt); + +void enable_hlt(void) +{ + hlt_counter--; +} +EXPORT_SYMBOL(enable_hlt); + +static inline int hlt_use_halt(void) +{ + return (!hlt_counter && boot_cpu_data.hlt_works_ok); +} +#else +static inline int hlt_use_halt(void) +{ + return 1; +} +#endif + +/* + * We use this if we don't have any better + * idle routine.. + */ +void default_idle(void) +{ + if (hlt_use_halt()) { + current_thread_info()->status &= ~TS_POLLING; + /* + * TS_POLLING-cleared state must be visible before we + * test NEED_RESCHED: + */ + smp_mb(); + + if (!need_resched()) + safe_halt(); /* enables interrupts racelessly */ + else + local_irq_enable(); + current_thread_info()->status |= TS_POLLING; + } else { + local_irq_enable(); + /* loop is done by the caller */ + cpu_relax(); + } +} +#ifdef CONFIG_APM_MODULE +EXPORT_SYMBOL(default_idle); +#endif + static void do_nothing(void *unused) { } @@ -122,44 +193,129 @@ static void poll_idle(void) * * idle=mwait overrides this decision and forces the usage of mwait. */ + +#define MWAIT_INFO 0x05 +#define MWAIT_ECX_EXTENDED_INFO 0x01 +#define MWAIT_EDX_C1 0xf0 + static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c) { + u32 eax, ebx, ecx, edx; + if (force_mwait) return 1; - if (c->x86_vendor == X86_VENDOR_AMD) { - switch(c->x86) { - case 0x10: - case 0x11: - return 0; - } - } + if (c->cpuid_level < MWAIT_INFO) + return 0; + + cpuid(MWAIT_INFO, &eax, &ebx, &ecx, &edx); + /* Check, whether EDX has extended info about MWAIT */ + if (!(ecx & MWAIT_ECX_EXTENDED_INFO)) + return 1; + + /* + * edx enumeratios MONITOR/MWAIT extensions. Check, whether + * C1 supports MWAIT + */ + return (edx & MWAIT_EDX_C1); +} + +/* + * Check for AMD CPUs, which have potentially C1E support + */ +static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c) +{ + if (c->x86_vendor != X86_VENDOR_AMD) + return 0; + + if (c->x86 < 0x0F) + return 0; + + /* Family 0x0f models < rev F do not have C1E */ + if (c->x86 == 0x0f && c->x86_model < 0x40) + return 0; + return 1; } -void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) +/* + * C1E aware idle routine. We check for C1E active in the interrupt + * pending message MSR. If we detect C1E, then we handle it the same + * way as C3 power states (local apic timer and TSC stop) + */ +static void c1e_idle(void) { - static int selected; + static cpumask_t c1e_mask = CPU_MASK_NONE; + static int c1e_detected; - if (selected) + if (need_resched()) return; + + if (!c1e_detected) { + u32 lo, hi; + + rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi); + if (lo & K8_INTP_C1E_ACTIVE_MASK) { + c1e_detected = 1; + mark_tsc_unstable("TSC halt in C1E"); + printk(KERN_INFO "System has C1E enabled\n"); + } + } + + if (c1e_detected) { + int cpu = smp_processor_id(); + + if (!cpu_isset(cpu, c1e_mask)) { + cpu_set(cpu, c1e_mask); + /* + * Force broadcast so ACPI can not interfere. Needs + * to run with interrupts enabled as it uses + * smp_function_call. + */ + local_irq_enable(); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE, + &cpu); + printk(KERN_INFO "Switch to broadcast mode on CPU%d\n", + cpu); + local_irq_disable(); + } + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu); + + default_idle(); + + /* + * The switch back from broadcast mode needs to be + * called with interrupts disabled. + */ + local_irq_disable(); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu); + local_irq_enable(); + } else + default_idle(); +} + +void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) +{ #ifdef CONFIG_X86_SMP if (pm_idle == poll_idle && smp_num_siblings > 1) { printk(KERN_WARNING "WARNING: polling idle and HT enabled," " performance may degrade.\n"); } #endif + if (pm_idle) + return; + if (cpu_has(c, X86_FEATURE_MWAIT) && mwait_usable(c)) { /* - * Skip, if setup has overridden idle. * One CPU supports mwait => All CPUs supports mwait */ - if (!pm_idle) { - printk(KERN_INFO "using mwait in idle threads.\n"); - pm_idle = mwait_idle; - } - } - selected = 1; + printk(KERN_INFO "using mwait in idle threads.\n"); + pm_idle = mwait_idle; + } else if (check_c1e_idle(c)) { + printk(KERN_INFO "using C1E aware idle routine\n"); + pm_idle = c1e_idle; + } else + pm_idle = default_idle; } static int __init idle_setup(char *str) diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index e2db9ac..c2a11d7 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -58,11 +58,6 @@ asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); -static int hlt_counter; - -unsigned long boot_option_idle_override = 0; -EXPORT_SYMBOL(boot_option_idle_override); - DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task; EXPORT_PER_CPU_SYMBOL(current_task); @@ -77,55 +72,6 @@ unsigned long thread_saved_pc(struct task_struct *tsk) return ((unsigned long *)tsk->thread.sp)[3]; } -/* - * Powermanagement idle function, if any.. - */ -void (*pm_idle)(void); -EXPORT_SYMBOL(pm_idle); - -void disable_hlt(void) -{ - hlt_counter++; -} - -EXPORT_SYMBOL(disable_hlt); - -void enable_hlt(void) -{ - hlt_counter--; -} - -EXPORT_SYMBOL(enable_hlt); - -/* - * We use this if we don't have any better - * idle routine.. - */ -void default_idle(void) -{ - if (!hlt_counter && boot_cpu_data.hlt_works_ok) { - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we - * test NEED_RESCHED: - */ - smp_mb(); - - if (!need_resched()) - safe_halt(); /* enables interrupts racelessly */ - else - local_irq_enable(); - current_thread_info()->status |= TS_POLLING; - } else { - local_irq_enable(); - /* loop is done by the caller */ - cpu_relax(); - } -} -#ifdef CONFIG_APM_MODULE -EXPORT_SYMBOL(default_idle); -#endif - #ifdef CONFIG_HOTPLUG_CPU #include <asm/nmi.h> /* We don't actually take CPU down, just spin without interrupts. */ @@ -168,24 +114,19 @@ void cpu_idle(void) while (1) { tick_nohz_stop_sched_tick(); while (!need_resched()) { - void (*idle)(void); check_pgt_cache(); rmb(); - idle = pm_idle; if (rcu_pending(cpu)) rcu_check_callbacks(cpu, 0); - if (!idle) - idle = default_idle; - if (cpu_is_offline(cpu)) play_dead(); local_irq_disable(); __get_cpu_var(irq_stat).idle_timestamp = jiffies; - idle(); + pm_idle(); } tick_nohz_restart_sched_tick(); preempt_enable_no_resched(); diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index c6eb5c9..290183e 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -56,15 +56,6 @@ asmlinkage extern void ret_from_fork(void); unsigned long kernel_thread_flags = CLONE_VM | CLONE_UNTRACED; -unsigned long boot_option_idle_override = 0; -EXPORT_SYMBOL(boot_option_idle_override); - -/* - * Powermanagement idle function, if any.. - */ -void (*pm_idle)(void); -EXPORT_SYMBOL(pm_idle); - static ATOMIC_NOTIFIER_HEAD(idle_notifier); void idle_notifier_register(struct notifier_block *n) @@ -94,25 +85,6 @@ void exit_idle(void) __exit_idle(); } -/* - * We use this if we don't have any better - * idle routine.. - */ -void default_idle(void) -{ - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we - * test NEED_RESCHED: - */ - smp_mb(); - if (!need_resched()) - safe_halt(); /* enables interrupts racelessly */ - else - local_irq_enable(); - current_thread_info()->status |= TS_POLLING; -} - #ifdef CONFIG_HOTPLUG_CPU DECLARE_PER_CPU(int, cpu_state); @@ -150,12 +122,9 @@ void cpu_idle(void) while (1) { tick_nohz_stop_sched_tick(); while (!need_resched()) { - void (*idle)(void); rmb(); - idle = pm_idle; - if (!idle) - idle = default_idle; + if (cpu_is_offline(smp_processor_id())) play_dead(); /* @@ -165,7 +134,7 @@ void cpu_idle(void) */ local_irq_disable(); enter_idle(); - idle(); + pm_idle(); /* In many cases the interrupt that ended idle has already called exit_idle. But some idle loops can be woken up without interrupt. */ diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index d89a648..79bdcd1 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -65,6 +65,7 @@ static enum { ICH_FORCE_HPET_RESUME, VT8237_FORCE_HPET_RESUME, NVIDIA_FORCE_HPET_RESUME, + ATI_FORCE_HPET_RESUME, } force_hpet_resume_type; static void __iomem *rcba_base; @@ -158,6 +159,8 @@ static void ich_force_enable_hpet(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, ich_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, + ich_force_enable_hpet); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, ich_force_enable_hpet); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, @@ -174,6 +177,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, static struct pci_dev *cached_dev; +static void hpet_print_force_info(void) +{ + printk(KERN_INFO "HPET not enabled in BIOS. " + "You might try hpet=force boot option\n"); +} + static void old_ich_force_hpet_resume(void) { u32 val; @@ -253,6 +262,8 @@ static void old_ich_force_enable_hpet_user(struct pci_dev *dev) { if (hpet_force_user) old_ich_force_enable_hpet(dev); + else + hpet_print_force_info(); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, @@ -290,8 +301,13 @@ static void vt8237_force_enable_hpet(struct pci_dev *dev) { u32 uninitialized_var(val); - if (!hpet_force_user || hpet_address || force_hpet_address) + if (hpet_address || force_hpet_address) + return; + + if (!hpet_force_user) { + hpet_print_force_info(); return; + } pci_read_config_dword(dev, 0x68, &val); /* @@ -330,6 +346,36 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, vt8237_force_enable_hpet); +static void ati_force_hpet_resume(void) +{ + pci_write_config_dword(cached_dev, 0x14, 0xfed00000); + printk(KERN_DEBUG "Force enabled HPET at resume\n"); +} + +static void ati_force_enable_hpet(struct pci_dev *dev) +{ + u32 uninitialized_var(val); + + if (hpet_address || force_hpet_address) + return; + + if (!hpet_force_user) { + hpet_print_force_info(); + return; + } + + pci_write_config_dword(dev, 0x14, 0xfed00000); + pci_read_config_dword(dev, 0x14, &val); + force_hpet_address = val; + force_hpet_resume_type = ATI_FORCE_HPET_RESUME; + dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n", + force_hpet_address); + cached_dev = dev; + return; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS, + ati_force_enable_hpet); + /* * Undocumented chipset feature taken from LinuxBIOS. */ @@ -343,8 +389,13 @@ static void nvidia_force_enable_hpet(struct pci_dev *dev) { u32 uninitialized_var(val); - if (!hpet_force_user || hpet_address || force_hpet_address) + if (hpet_address || force_hpet_address) + return; + + if (!hpet_force_user) { + hpet_print_force_info(); return; + } pci_write_config_dword(dev, 0x44, 0xfed00001); pci_read_config_dword(dev, 0x44, &val); @@ -397,6 +448,9 @@ void force_hpet_resume(void) case NVIDIA_FORCE_HPET_RESUME: nvidia_force_hpet_resume(); return; + case ATI_FORCE_HPET_RESUME: + ati_force_hpet_resume(); + return; default: break; } diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index f6be7d5..f8a6216 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -27,7 +27,7 @@ void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); -static long no_idt[3]; +static const struct desc_ptr no_idt = {}; static int reboot_mode; enum reboot_type reboot_type = BOOT_KBD; int reboot_force; @@ -201,15 +201,15 @@ core_initcall(reboot_init); controller to pulse the CPU reset line, which is more thorough, but doesn't work with at least one type of 486 motherboard. It is easy to stop this code working; hence the copious comments. */ -static unsigned long long +static const unsigned long long real_mode_gdt_entries [3] = { 0x0000000000000000ULL, /* Null descriptor */ - 0x00009a000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */ - 0x000092000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */ + 0x00009b000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */ + 0x000093000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */ }; -static struct desc_ptr +static const struct desc_ptr real_mode_gdt = { sizeof (real_mode_gdt_entries) - 1, (long)real_mode_gdt_entries }, real_mode_idt = { 0x3ff, 0 }; @@ -231,7 +231,7 @@ real_mode_idt = { 0x3ff, 0 }; More could be done here to set up the registers as if a CPU reset had occurred; hopefully real BIOSs don't assume much. */ -static unsigned char real_mode_switch [] = +static const unsigned char real_mode_switch [] = { 0x66, 0x0f, 0x20, 0xc0, /* movl %cr0,%eax */ 0x66, 0x83, 0xe0, 0x11, /* andl $0x00000011,%eax */ @@ -245,7 +245,7 @@ static unsigned char real_mode_switch [] = 0x24, 0x10, /* f: andb $0x10,al */ 0x66, 0x0f, 0x22, 0xc0 /* movl %eax,%cr0 */ }; -static unsigned char jump_to_bios [] = +static const unsigned char jump_to_bios [] = { 0xea, 0x00, 0x00, 0xff, 0xff /* ljmp $0xffff,$0x0000 */ }; @@ -255,7 +255,7 @@ static unsigned char jump_to_bios [] = * specified by the code and length parameters. * We assume that length will aways be less that 100! */ -void machine_real_restart(unsigned char *code, int length) +void machine_real_restart(const unsigned char *code, int length) { local_irq_disable(); @@ -368,7 +368,7 @@ static void native_machine_emergency_restart(void) } case BOOT_TRIPLE: - load_idt((const struct desc_ptr *)&no_idt); + load_idt(&no_idt); __asm__ __volatile__("int3"); reboot_type = BOOT_KBD; diff --git a/arch/x86/kernel/reboot_fixups_32.c b/arch/x86/kernel/reboot_fixups_32.c index dec0b5e..61a8377 100644 --- a/arch/x86/kernel/reboot_fixups_32.c +++ b/arch/x86/kernel/reboot_fixups_32.c @@ -49,7 +49,7 @@ struct device_fixup { void (*reboot_fixup)(struct pci_dev *); }; -static struct device_fixup fixups_table[] = { +static const struct device_fixup fixups_table[] = { { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset }, { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset }, { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset }, @@ -64,7 +64,7 @@ static struct device_fixup fixups_table[] = { */ void mach_reboot_fixups(void) { - struct device_fixup *cur; + const struct device_fixup *cur; struct pci_dev *dev; int i; diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 6dff128..545440e4 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -71,6 +71,7 @@ #include <asm/topology.h> #include <asm/trampoline.h> #include <asm/pat.h> +#include <asm/mmconfig.h> #include <mach_apic.h> #ifdef CONFIG_PARAVIRT @@ -79,6 +80,8 @@ #define ARCH_SETUP #endif +#include "cpu/cpu.h" + /* * Machine setup.. */ @@ -95,8 +98,6 @@ int bootloader_type; unsigned long saved_video_mode; -int force_mwait __cpuinitdata; - /* * Early DMI memory */ @@ -118,7 +119,7 @@ EXPORT_SYMBOL_GPL(edid_info); extern int root_mountflags; -char __initdata command_line[COMMAND_LINE_SIZE]; +static char __initdata command_line[COMMAND_LINE_SIZE]; static struct resource standard_io_resources[] = { { .name = "dma1", .start = 0x00, .end = 0x1f, @@ -164,6 +165,7 @@ static struct resource bss_resource = { .flags = IORESOURCE_RAM, }; +static void __init early_cpu_init(void); static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c); #ifdef CONFIG_PROC_VMCORE @@ -293,18 +295,6 @@ static void __init parse_setup_data(void) } } -#ifdef CONFIG_PCI_MMCONFIG -extern void __cpuinit fam10h_check_enable_mmcfg(void); -extern void __init check_enable_amd_mmconf_dmi(void); -#else -void __cpuinit fam10h_check_enable_mmcfg(void) -{ -} -void __init check_enable_amd_mmconf_dmi(void) -{ -} -#endif - /* * setup_arch - architecture-specific boot-time initializations * @@ -352,6 +342,7 @@ void __init setup_arch(char **cmdline_p) bss_resource.start = virt_to_phys(&__bss_start); bss_resource.end = virt_to_phys(&__bss_stop)-1; + early_cpu_init(); early_identify_cpu(&boot_cpu_data); strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); @@ -537,7 +528,20 @@ void __init setup_arch(char **cmdline_p) check_enable_amd_mmconf_dmi(); } -static int __cpuinit get_model_name(struct cpuinfo_x86 *c) +struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {}; + +static void __cpuinit default_init(struct cpuinfo_x86 *c) +{ + display_cacheinfo(c); +} + +static struct cpu_dev __cpuinitdata default_cpu = { + .c_init = default_init, + .c_vendor = "Unknown", +}; +static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu; + +int __cpuinit get_model_name(struct cpuinfo_x86 *c) { unsigned int *v; @@ -553,7 +557,7 @@ static int __cpuinit get_model_name(struct cpuinfo_x86 *c) } -static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) +void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) { unsigned int n, dummy, eax, ebx, ecx, edx; @@ -585,228 +589,6 @@ static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) } } -#ifdef CONFIG_NUMA -static int __cpuinit nearby_node(int apicid) -{ - int i, node; - - for (i = apicid - 1; i >= 0; i--) { - node = apicid_to_node[i]; - if (node != NUMA_NO_NODE && node_online(node)) - return node; - } - for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { - node = apicid_to_node[i]; - if (node != NUMA_NO_NODE && node_online(node)) - return node; - } - return first_node(node_online_map); /* Shouldn't happen */ -} -#endif - -/* - * On a AMD dual core setup the lower bits of the APIC id distingush the cores. - * Assumes number of cores is a power of two. - */ -static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - unsigned bits; -#ifdef CONFIG_NUMA - int cpu = smp_processor_id(); - int node = 0; - unsigned apicid = hard_smp_processor_id(); -#endif - bits = c->x86_coreid_bits; - - /* Low order bits define the core id (index of core in socket) */ - c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); - /* Convert the initial APIC ID into the socket ID */ - c->phys_proc_id = c->initial_apicid >> bits; - -#ifdef CONFIG_NUMA - node = c->phys_proc_id; - if (apicid_to_node[apicid] != NUMA_NO_NODE) - node = apicid_to_node[apicid]; - if (!node_online(node)) { - /* Two possibilities here: - - The CPU is missing memory and no node was created. - In that case try picking one from a nearby CPU - - The APIC IDs differ from the HyperTransport node IDs - which the K8 northbridge parsing fills in. - Assume they are all increased by a constant offset, - but in the same order as the HT nodeids. - If that doesn't result in a usable node fall back to the - path for the previous case. */ - - int ht_nodeid = c->initial_apicid; - - if (ht_nodeid >= 0 && - apicid_to_node[ht_nodeid] != NUMA_NO_NODE) - node = apicid_to_node[ht_nodeid]; - /* Pick a nearby node */ - if (!node_online(node)) - node = nearby_node(apicid); - } - numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); -#endif -#endif -} - -static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - unsigned bits, ecx; - - /* Multi core CPU? */ - if (c->extended_cpuid_level < 0x80000008) - return; - - ecx = cpuid_ecx(0x80000008); - - c->x86_max_cores = (ecx & 0xff) + 1; - - /* CPU telling us the core id bits shift? */ - bits = (ecx >> 12) & 0xF; - - /* Otherwise recompute */ - if (bits == 0) { - while ((1 << bits) < c->x86_max_cores) - bits++; - } - - c->x86_coreid_bits = bits; - -#endif -} - -#define ENABLE_C1E_MASK 0x18000000 -#define CPUID_PROCESSOR_SIGNATURE 1 -#define CPUID_XFAM 0x0ff00000 -#define CPUID_XFAM_K8 0x00000000 -#define CPUID_XFAM_10H 0x00100000 -#define CPUID_XFAM_11H 0x00200000 -#define CPUID_XMOD 0x000f0000 -#define CPUID_XMOD_REV_F 0x00040000 - -/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */ -static __cpuinit int amd_apic_timer_broken(void) -{ - u32 lo, hi, eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - - switch (eax & CPUID_XFAM) { - case CPUID_XFAM_K8: - if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F) - break; - case CPUID_XFAM_10H: - case CPUID_XFAM_11H: - rdmsr(MSR_K8_ENABLE_C1E, lo, hi); - if (lo & ENABLE_C1E_MASK) - return 1; - break; - default: - /* err on the side of caution */ - return 1; - } - return 0; -} - -static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) -{ - early_init_amd_mc(c); - - /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */ - if (c->x86_power & (1<<8)) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); -} - -static void __cpuinit init_amd(struct cpuinfo_x86 *c) -{ - unsigned level; - -#ifdef CONFIG_SMP - unsigned long value; - - /* - * Disable TLB flush filter by setting HWCR.FFDIS on K8 - * bit 6 of msr C001_0015 - * - * Errata 63 for SH-B3 steppings - * Errata 122 for all steppings (F+ have it disabled by default) - */ - if (c->x86 == 15) { - rdmsrl(MSR_K8_HWCR, value); - value |= 1 << 6; - wrmsrl(MSR_K8_HWCR, value); - } -#endif - - /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; - 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ - clear_cpu_cap(c, 0*32+31); - - /* On C+ stepping K8 rep microcode works well for copy/memset */ - level = cpuid_eax(1); - if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) || - level >= 0x0f58)) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - if (c->x86 == 0x10 || c->x86 == 0x11) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - - /* Enable workaround for FXSAVE leak */ - if (c->x86 >= 6) - set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK); - - level = get_model_name(c); - if (!level) { - switch (c->x86) { - case 15: - /* Should distinguish Models here, but this is only - a fallback anyways. */ - strcpy(c->x86_model_id, "Hammer"); - break; - } - } - display_cacheinfo(c); - - /* Multi core CPU? */ - if (c->extended_cpuid_level >= 0x80000008) - amd_detect_cmp(c); - - if (c->extended_cpuid_level >= 0x80000006 && - (cpuid_edx(0x80000006) & 0xf000)) - num_cache_leaves = 4; - else - num_cache_leaves = 3; - - if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x11) - set_cpu_cap(c, X86_FEATURE_K8); - - /* MFENCE stops RDTSC speculation */ - set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); - - if (c->x86 == 0x10) - fam10h_check_enable_mmcfg(); - - if (amd_apic_timer_broken()) - disable_apic_timer = 1; - - if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { - unsigned long long tseg; - - /* - * Split up direct mapping around the TSEG SMM area. - * Don't do it for gbpages because there seems very little - * benefit in doing so. - */ - if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg) && - (tseg >> PMD_SHIFT) < (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT))) - set_memory_4k((unsigned long)__va(tseg), 1); - } -} - void __cpuinit detect_ht(struct cpuinfo_x86 *c) { #ifdef CONFIG_SMP @@ -857,135 +639,59 @@ out: #endif } -/* - * find out the number of processor cores on the die - */ -static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) -{ - unsigned int eax, t; - - if (c->cpuid_level < 4) - return 1; - - cpuid_count(4, 0, &eax, &t, &t, &t); - - if (eax & 0x1f) - return ((eax >> 26) + 1); - else - return 1; -} - -static void __cpuinit srat_detect_node(void) -{ -#ifdef CONFIG_NUMA - unsigned node; - int cpu = smp_processor_id(); - int apicid = hard_smp_processor_id(); - - /* Don't do the funky fallback heuristics the AMD version employs - for now. */ - node = apicid_to_node[apicid]; - if (node == NUMA_NO_NODE || !node_online(node)) - node = first_node(node_online_map); - numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); -#endif -} - -static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) -{ - if ((c->x86 == 0xf && c->x86_model >= 0x03) || - (c->x86 == 0x6 && c->x86_model >= 0x0e)) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); -} - -static void __cpuinit init_intel(struct cpuinfo_x86 *c) +static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) { - /* Cache sizes */ - unsigned n; - - init_intel_cacheinfo(c); - if (c->cpuid_level > 9) { - unsigned eax = cpuid_eax(10); - /* Check for version and the number of counters */ - if ((eax & 0xff) && (((eax>>8) & 0xff) > 1)) - set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON); + char *v = c->x86_vendor_id; + int i; + static int printed; + + for (i = 0; i < X86_VENDOR_NUM; i++) { + if (cpu_devs[i]) { + if (!strcmp(v, cpu_devs[i]->c_ident[0]) || + (cpu_devs[i]->c_ident[1] && + !strcmp(v, cpu_devs[i]->c_ident[1]))) { + c->x86_vendor = i; + this_cpu = cpu_devs[i]; + return; + } + } } - - if (cpu_has_ds) { - unsigned int l1, l2; - rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); - if (!(l1 & (1<<11))) - set_cpu_cap(c, X86_FEATURE_BTS); - if (!(l1 & (1<<12))) - set_cpu_cap(c, X86_FEATURE_PEBS); + if (!printed) { + printed++; + printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n"); + printk(KERN_ERR "CPU: Your system may be unstable.\n"); } - - - if (cpu_has_bts) - ds_init_intel(c); - - n = c->extended_cpuid_level; - if (n >= 0x80000008) { - unsigned eax = cpuid_eax(0x80000008); - c->x86_virt_bits = (eax >> 8) & 0xff; - c->x86_phys_bits = eax & 0xff; - /* CPUID workaround for Intel 0F34 CPU */ - if (c->x86_vendor == X86_VENDOR_INTEL && - c->x86 == 0xF && c->x86_model == 0x3 && - c->x86_mask == 0x4) - c->x86_phys_bits = 36; - } - - if (c->x86 == 15) - c->x86_cache_alignment = c->x86_clflush_size * 2; - if (c->x86 == 6) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); - c->x86_max_cores = intel_num_cpu_cores(c); - - srat_detect_node(); -} - -static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) -{ - if (c->x86 == 0x6 && c->x86_model >= 0xf) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); + c->x86_vendor = X86_VENDOR_UNKNOWN; } -static void __cpuinit init_centaur(struct cpuinfo_x86 *c) +static void __init early_cpu_support_print(void) { - /* Cache sizes */ - unsigned n; + int i,j; + struct cpu_dev *cpu_devx; - n = c->extended_cpuid_level; - if (n >= 0x80000008) { - unsigned eax = cpuid_eax(0x80000008); - c->x86_virt_bits = (eax >> 8) & 0xff; - c->x86_phys_bits = eax & 0xff; - } - - if (c->x86 == 0x6 && c->x86_model >= 0xf) { - c->x86_cache_alignment = c->x86_clflush_size * 2; - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); - set_cpu_cap(c, X86_FEATURE_REP_GOOD); + printk("KERNEL supported cpus:\n"); + for (i = 0; i < X86_VENDOR_NUM; i++) { + cpu_devx = cpu_devs[i]; + if (!cpu_devx) + continue; + for (j = 0; j < 2; j++) { + if (!cpu_devx->c_ident[j]) + continue; + printk(" %s %s\n", cpu_devx->c_vendor, + cpu_devx->c_ident[j]); + } } - set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); } -static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) +static void __init early_cpu_init(void) { - char *v = c->x86_vendor_id; + struct cpu_vendor_dev *cvdev; - if (!strcmp(v, "AuthenticAMD")) - c->x86_vendor = X86_VENDOR_AMD; - else if (!strcmp(v, "GenuineIntel")) - c->x86_vendor = X86_VENDOR_INTEL; - else if (!strcmp(v, "CentaurHauls")) - c->x86_vendor = X86_VENDOR_CENTAUR; - else - c->x86_vendor = X86_VENDOR_UNKNOWN; + for (cvdev = __x86cpuvendor_start ; + cvdev < __x86cpuvendor_end ; + cvdev++) + cpu_devs[cvdev->vendor] = cvdev->cpu_dev; + early_cpu_support_print(); } /* Do some early cpuid on the boot CPU to get some parameter that are @@ -1066,17 +772,9 @@ static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c) if (c->extended_cpuid_level >= 0x80000007) c->x86_power = cpuid_edx(0x80000007); - switch (c->x86_vendor) { - case X86_VENDOR_AMD: - early_init_amd(c); - break; - case X86_VENDOR_INTEL: - early_init_intel(c); - break; - case X86_VENDOR_CENTAUR: - early_init_centaur(c); - break; - } + if (c->x86_vendor != X86_VENDOR_UNKNOWN && + cpu_devs[c->x86_vendor]->c_early_init) + cpu_devs[c->x86_vendor]->c_early_init(c); validate_pat_support(c); } @@ -1104,24 +802,8 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c) * At the end of this section, c->x86_capability better * indicate the features this CPU genuinely supports! */ - switch (c->x86_vendor) { - case X86_VENDOR_AMD: - init_amd(c); - break; - - case X86_VENDOR_INTEL: - init_intel(c); - break; - - case X86_VENDOR_CENTAUR: - init_centaur(c); - break; - - case X86_VENDOR_UNKNOWN: - default: - display_cacheinfo(c); - break; - } + if (this_cpu->c_init) + this_cpu->c_init(c); detect_ht(c); diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 3e1cece..f2b6667 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -59,7 +59,6 @@ #include <asm/pgtable.h> #include <asm/tlbflush.h> #include <asm/mtrr.h> -#include <asm/nmi.h> #include <asm/vmi.h> #include <asm/genapic.h> #include <linux/mc146818rtc.h> @@ -1157,9 +1156,11 @@ static int __init smp_sanity_check(unsigned max_cpus) * If SMP should be disabled, then really disable it! */ if (!max_cpus) { - printk(KERN_INFO "SMP mode deactivated," - "forcing use of dummy APIC emulation.\n"); + printk(KERN_INFO "SMP mode deactivated.\n"); smpboot_clear_io_apic(); + + localise_nmi_watchdog(); + #ifdef CONFIG_X86_32 connect_bsp_APIC(); #endif diff --git a/arch/x86/kernel/sys_i386_32.c b/arch/x86/kernel/sys_i386_32.c index d2ab52c..7066cb8 100644 --- a/arch/x86/kernel/sys_i386_32.c +++ b/arch/x86/kernel/sys_i386_32.c @@ -19,8 +19,8 @@ #include <linux/utsname.h> #include <linux/ipc.h> -#include <asm/uaccess.h> -#include <asm/unistd.h> +#include <linux/uaccess.h> +#include <linux/unistd.h> asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, @@ -103,7 +103,7 @@ asmlinkage int old_select(struct sel_arg_struct __user *arg) * * This is really horribly ugly. */ -asmlinkage int sys_ipc (uint call, int first, int second, +asmlinkage int sys_ipc(uint call, int first, int second, int third, void __user *ptr, long fifth) { int version, ret; @@ -113,24 +113,24 @@ asmlinkage int sys_ipc (uint call, int first, int second, switch (call) { case SEMOP: - return sys_semtimedop (first, (struct sembuf __user *)ptr, second, NULL); + return sys_semtimedop(first, (struct sembuf __user *)ptr, second, NULL); case SEMTIMEDOP: return sys_semtimedop(first, (struct sembuf __user *)ptr, second, (const struct timespec __user *)fifth); case SEMGET: - return sys_semget (first, second, third); + return sys_semget(first, second, third); case SEMCTL: { union semun fourth; if (!ptr) return -EINVAL; if (get_user(fourth.__pad, (void __user * __user *) ptr)) return -EFAULT; - return sys_semctl (first, second, third, fourth); + return sys_semctl(first, second, third, fourth); } case MSGSND: - return sys_msgsnd (first, (struct msgbuf __user *) ptr, + return sys_msgsnd(first, (struct msgbuf __user *) ptr, second, third); case MSGRCV: switch (version) { @@ -138,45 +138,45 @@ asmlinkage int sys_ipc (uint call, int first, int second, struct ipc_kludge tmp; if (!ptr) return -EINVAL; - + if (copy_from_user(&tmp, - (struct ipc_kludge __user *) ptr, - sizeof (tmp))) + (struct ipc_kludge __user *) ptr, + sizeof(tmp))) return -EFAULT; - return sys_msgrcv (first, tmp.msgp, second, + return sys_msgrcv(first, tmp.msgp, second, tmp.msgtyp, third); } default: - return sys_msgrcv (first, + return sys_msgrcv(first, (struct msgbuf __user *) ptr, second, fifth, third); } case MSGGET: - return sys_msgget ((key_t) first, second); + return sys_msgget((key_t) first, second); case MSGCTL: - return sys_msgctl (first, second, (struct msqid_ds __user *) ptr); + return sys_msgctl(first, second, (struct msqid_ds __user *) ptr); case SHMAT: switch (version) { default: { ulong raddr; - ret = do_shmat (first, (char __user *) ptr, second, &raddr); + ret = do_shmat(first, (char __user *) ptr, second, &raddr); if (ret) return ret; - return put_user (raddr, (ulong __user *) third); + return put_user(raddr, (ulong __user *) third); } case 1: /* iBCS2 emulator entry point */ if (!segment_eq(get_fs(), get_ds())) return -EINVAL; /* The "(ulong *) third" is valid _only_ because of the kernel segment thing */ - return do_shmat (first, (char __user *) ptr, second, (ulong *) third); + return do_shmat(first, (char __user *) ptr, second, (ulong *) third); } - case SHMDT: - return sys_shmdt ((char __user *)ptr); + case SHMDT: + return sys_shmdt((char __user *)ptr); case SHMGET: - return sys_shmget (first, second, third); + return sys_shmget(first, second, third); case SHMCTL: - return sys_shmctl (first, second, + return sys_shmctl(first, second, (struct shmid_ds __user *) ptr); default: return -ENOSYS; @@ -186,28 +186,28 @@ asmlinkage int sys_ipc (uint call, int first, int second, /* * Old cruft */ -asmlinkage int sys_uname(struct old_utsname __user * name) +asmlinkage int sys_uname(struct old_utsname __user *name) { int err; if (!name) return -EFAULT; down_read(&uts_sem); - err = copy_to_user(name, utsname(), sizeof (*name)); + err = copy_to_user(name, utsname(), sizeof(*name)); up_read(&uts_sem); - return err?-EFAULT:0; + return err? -EFAULT:0; } -asmlinkage int sys_olduname(struct oldold_utsname __user * name) +asmlinkage int sys_olduname(struct oldold_utsname __user *name) { int error; if (!name) return -EFAULT; - if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname))) + if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname))) return -EFAULT; - - down_read(&uts_sem); - + + down_read(&uts_sem); + error = __copy_to_user(&name->sysname, &utsname()->sysname, __OLD_UTS_LEN); error |= __put_user(0, name->sysname + __OLD_UTS_LEN); @@ -223,9 +223,9 @@ asmlinkage int sys_olduname(struct oldold_utsname __user * name) error |= __copy_to_user(&name->machine, &utsname()->machine, __OLD_UTS_LEN); error |= __put_user(0, name->machine + __OLD_UTS_LEN); - + up_read(&uts_sem); - + error = error ? -EFAULT : 0; return error; @@ -241,6 +241,6 @@ int kernel_execve(const char *filename, char *const argv[], char *const envp[]) long __res; asm volatile ("push %%ebx ; movl %2,%%ebx ; int $0x80 ; pop %%ebx" : "=a" (__res) - : "0" (__NR_execve),"ri" (filename),"c" (argv), "d" (envp) : "memory"); + : "0" (__NR_execve), "ri" (filename), "c" (argv), "d" (envp) : "memory"); return __res; } diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c index 2ff21f3..5f29f12 100644 --- a/arch/x86/kernel/time_32.c +++ b/arch/x86/kernel/time_32.c @@ -84,8 +84,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id) if (timer_ack) { /* * Subtle, when I/O APICs are used we have to ack timer IRQ - * manually to reset the IRR bit for do_slow_gettimeoffset(). - * This will also deassert NMI lines for the watchdog if run + * manually to deassert NMI lines for the watchdog if run * on an 82489DX-based system. */ spin_lock(&i8259A_lock); diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c index adff76e..ec6d3b2 100644 --- a/arch/x86/kernel/traps_64.c +++ b/arch/x86/kernel/traps_64.c @@ -71,7 +71,6 @@ asmlinkage void general_protection(void); asmlinkage void page_fault(void); asmlinkage void coprocessor_error(void); asmlinkage void simd_coprocessor_error(void); -asmlinkage void reserved(void); asmlinkage void alignment_check(void); asmlinkage void machine_check(void); asmlinkage void spurious_interrupt_bug(void); @@ -702,12 +701,10 @@ DO_ERROR_INFO( 0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip) DO_ERROR( 4, SIGSEGV, "overflow", overflow) DO_ERROR( 5, SIGSEGV, "bounds", bounds) DO_ERROR_INFO( 6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip) -DO_ERROR( 7, SIGSEGV, "device not available", device_not_available) DO_ERROR( 9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun) DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS) DO_ERROR(11, SIGBUS, "segment not present", segment_not_present) DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0) -DO_ERROR(18, SIGSEGV, "reserved", reserved) /* Runs on IST stack */ asmlinkage void do_stack_segment(struct pt_regs *regs, long error_code) diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c index 65b7063..774a5a8 100644 --- a/arch/x86/kernel/tsc_32.c +++ b/arch/x86/kernel/tsc_32.c @@ -286,7 +286,6 @@ core_initcall(cpufreq_tsc); /* clock source code */ -static unsigned long current_tsc_khz; static struct clocksource clocksource_tsc; /* @@ -439,9 +438,8 @@ void __init tsc_init(void) unsynchronized_tsc(); check_geode_tsc_reliable(); - current_tsc_khz = tsc_khz; - clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz, - clocksource_tsc.shift); + clocksource_tsc.mult = clocksource_khz2mult(tsc_khz, + clocksource_tsc.shift); /* lower the rating if we already know its unstable: */ if (check_tsc_unstable()) { clocksource_tsc.rating = 0; diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c index 1784b80..9898fb0 100644 --- a/arch/x86/kernel/tsc_64.c +++ b/arch/x86/kernel/tsc_64.c @@ -242,7 +242,7 @@ void __init tsc_calibrate(void) if (hpet) { printk(KERN_INFO "TSC calibrated against HPET\n"); if (hpet2 < hpet1) - hpet2 += 0x100000000; + hpet2 += 0x100000000UL; hpet2 -= hpet1; tsc1 = (hpet2 * hpet_readl(HPET_PERIOD)) / 1000000; } else { diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S index ce5ed08..2674f57 100644 --- a/arch/x86/kernel/vmlinux_32.lds.S +++ b/arch/x86/kernel/vmlinux_32.lds.S @@ -60,13 +60,6 @@ SECTIONS BUG_TABLE :text - . = ALIGN(4); - .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { - __tracedata_start = .; - *(.tracedata) - __tracedata_end = .; - } - RODATA /* writeable */ diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S index fad3674..fd246e2 100644 --- a/arch/x86/kernel/vmlinux_64.lds.S +++ b/arch/x86/kernel/vmlinux_64.lds.S @@ -53,13 +53,6 @@ SECTIONS RODATA - . = ALIGN(4); - .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { - __tracedata_start = .; - *(.tracedata) - __tracedata_end = .; - } - . = ALIGN(PAGE_SIZE); /* Align data segment to page size boundary */ /* Data */ .data : AT(ADDR(.data) - LOAD_OFFSET) { @@ -177,6 +170,7 @@ SECTIONS *(.con_initcall.init) } __con_initcall_end = .; + . = ALIGN(16); __x86cpuvendor_start = .; .x86cpuvendor.init : AT(ADDR(.x86cpuvendor.init) - LOAD_OFFSET) { *(.x86cpuvendor.init) diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c index ba8c0b7..0c029e8 100644 --- a/arch/x86/kernel/vsmp_64.c +++ b/arch/x86/kernel/vsmp_64.c @@ -15,9 +15,12 @@ #include <linux/init.h> #include <linux/pci_ids.h> #include <linux/pci_regs.h> + +#include <asm/apic.h> #include <asm/pci-direct.h> #include <asm/io.h> #include <asm/paravirt.h> +#include <asm/setup.h> #if defined CONFIG_PCI && defined CONFIG_PARAVIRT /* diff --git a/arch/x86/math-emu/reg_constant.c b/arch/x86/math-emu/reg_constant.c index 04869e6..0054835 100644 --- a/arch/x86/math-emu/reg_constant.c +++ b/arch/x86/math-emu/reg_constant.c @@ -16,8 +16,8 @@ #include "reg_constant.h" #include "control_w.h" -#define MAKE_REG(s,e,l,h) { l, h, \ - ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) } +#define MAKE_REG(s, e, l, h) { l, h, \ + ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) } FPU_REG const CONST_1 = MAKE_REG(POS, 0, 0x00000000, 0x80000000); #if 0 @@ -40,7 +40,7 @@ FPU_REG const CONST_PI2extra = MAKE_REG(NEG, -66, FPU_REG const CONST_Z = MAKE_REG(POS, EXP_UNDER, 0x0, 0x0); /* Only the sign and significand (and tag) are used in internal NaNs */ -/* The 80486 never generates one of these +/* The 80486 never generates one of these FPU_REG const CONST_SNAN = MAKE_REG(POS, EXP_OVER, 0x00000001, 0x80000000); */ /* This is the real indefinite QNaN */ @@ -49,7 +49,7 @@ FPU_REG const CONST_QNaN = MAKE_REG(NEG, EXP_OVER, 0x00000000, 0xC0000000); /* Only the sign (and tag) is used in internal infinities */ FPU_REG const CONST_INF = MAKE_REG(POS, EXP_OVER, 0x00000000, 0x80000000); -static void fld_const(FPU_REG const *c, int adj, u_char tag) +static void fld_const(FPU_REG const * c, int adj, u_char tag) { FPU_REG *st_new_ptr; diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index 914ccf9..8b4eac0 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -156,7 +156,7 @@ static void __init propagate_e820_map_node(int nid) */ static void __init allocate_pgdat(int nid) { - if (nid && node_has_online_mem(nid)) + if (nid && node_has_online_mem(nid) && node_remap_start_vaddr[nid]) NODE_DATA(nid) = (pg_data_t *)node_remap_start_vaddr[nid]; else { NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(min_low_pfn)); @@ -164,16 +164,13 @@ static void __init allocate_pgdat(int nid) } } -#ifdef CONFIG_DISCONTIGMEM /* - * In the discontig memory model, a portion of the kernel virtual area (KVA) - * is reserved and portions of nodes are mapped using it. This is to allow - * node-local memory to be allocated for structures that would normally require - * ZONE_NORMAL. The memory is allocated with alloc_remap() and callers - * should be prepared to allocate from the bootmem allocator instead. This KVA - * mechanism is incompatible with SPARSEMEM as it makes assumptions about the - * layout of memory that are broken if alloc_remap() succeeds for some of the - * map and fails for others + * In the DISCONTIGMEM and SPARSEMEM memory model, a portion of the kernel + * virtual address space (KVA) is reserved and portions of nodes are mapped + * using it. This is to allow node-local memory to be allocated for + * structures that would normally require ZONE_NORMAL. The memory is + * allocated with alloc_remap() and callers should be prepared to allocate + * from the bootmem allocator instead. */ static unsigned long node_remap_start_pfn[MAX_NUMNODES]; static void *node_remap_end_vaddr[MAX_NUMNODES]; @@ -290,25 +287,6 @@ static void init_remap_allocator(int nid) (ulong) pfn_to_kaddr(highstart_pfn + node_remap_offset[nid] + node_remap_size[nid])); } -#else -void *alloc_remap(int nid, unsigned long size) -{ - return NULL; -} - -static unsigned long calculate_numa_remap_pages(void) -{ - return 0; -} - -static void init_remap_allocator(int nid) -{ -} - -void __init remap_numa_kva(void) -{ -} -#endif /* CONFIG_DISCONTIGMEM */ extern void setup_bootmem_allocator(void); unsigned long __init setup_memory(void) @@ -476,3 +454,21 @@ int memory_add_physaddr_to_nid(u64 addr) EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); #endif + +#if defined(CONFIG_ACPI_NUMA) && !defined(CONFIG_HAVE_ARCH_PARSE_SRAT) +/* + * Dummy on 32-bit, for now: + */ +void __init acpi_numa_slit_init(struct acpi_table_slit *slit) +{ +} + +void __init +acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) +{ +} + +void __init acpi_numa_arch_fixup(void) +{ +} +#endif diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 8bcb6f4..1e64795 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -55,11 +55,7 @@ static inline int notify_page_fault(struct pt_regs *regs) int ret = 0; /* kprobe_running() needs smp_processor_id() */ -#ifdef CONFIG_X86_32 if (!user_mode_vm(regs)) { -#else - if (!user_mode(regs)) { -#endif preempt_disable(); if (kprobe_running() && kprobe_fault_handler(regs, 14)) ret = 1; diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index 0269ac2..d71be0e 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -576,17 +576,6 @@ void __init mem_init(void) #endif bad_ppro = ppro_with_ram_bug(); -#ifdef CONFIG_HIGHMEM - /* check that fixmap and pkmap do not overlap */ - if (PKMAP_BASE + LAST_PKMAP*PAGE_SIZE >= FIXADDR_START) { - printk(KERN_ERR - "fixmap and kmap areas overlap - this will crash\n"); - printk(KERN_ERR "pkstart: %lxh pkend: %lxh fixstart %lxh\n", - PKMAP_BASE, PKMAP_BASE + LAST_PKMAP*PAGE_SIZE, - FIXADDR_START); - BUG(); - } -#endif /* this will put all low memory onto the freelists */ totalram_pages += free_all_bootmem(); @@ -619,7 +608,6 @@ void __init mem_init(void) (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)) ); -#if 1 /* double-sanity-check paranoia */ printk(KERN_INFO "virtual kernel memory layout:\n" " fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n" #ifdef CONFIG_HIGHMEM @@ -660,7 +648,6 @@ void __init mem_init(void) #endif BUG_ON(VMALLOC_START > VMALLOC_END); BUG_ON((unsigned long)high_memory > VMALLOC_START); -#endif /* double-sanity-check paranoia */ if (boot_cpu_data.wp_works_ok < 0) test_wp_bit(); diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 5e43838..48623ae 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -18,6 +18,7 @@ #include <linux/swap.h> #include <linux/smp.h> #include <linux/init.h> +#include <linux/initrd.h> #include <linux/pagemap.h> #include <linux/bootmem.h> #include <linux/proc_fs.h> @@ -438,7 +439,7 @@ static void __init init_gbpages(void) direct_gbpages = 0; } -#ifdef CONFIG_MEMTEST_BOOTPARAM +#ifdef CONFIG_MEMTEST static void __init memtest(unsigned long start_phys, unsigned long size, unsigned pattern) @@ -500,7 +501,8 @@ static void __init memtest(unsigned long start_phys, unsigned long size, } -static int memtest_pattern __initdata = CONFIG_MEMTEST_BOOTPARAM_VALUE; +/* default is disabled */ +static int memtest_pattern __initdata; static int __init parse_memtest(char *arg) { diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 01d7642..416ea41 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -142,7 +142,7 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, /* * Don't remap the low PCI/ISA area, it's always mapped.. */ - if (phys_addr >= ISA_START_ADDRESS && last_addr < ISA_END_ADDRESS) + if (is_ISA_range(phys_addr, last_addr)) return (__force void __iomem *)phys_to_virt(phys_addr); /* @@ -261,7 +261,7 @@ void __iomem *ioremap_nocache(resource_size_t phys_addr, unsigned long size) { /* * Ideally, this should be: - * pat_wc_enabled ? _PAGE_CACHE_UC : _PAGE_CACHE_UC_MINUS; + * pat_enabled ? _PAGE_CACHE_UC : _PAGE_CACHE_UC_MINUS; * * Till we fix all X drivers to use ioremap_wc(), we will use * UC MINUS. @@ -285,7 +285,7 @@ EXPORT_SYMBOL(ioremap_nocache); */ void __iomem *ioremap_wc(unsigned long phys_addr, unsigned long size) { - if (pat_wc_enabled) + if (pat_enabled) return __ioremap_caller(phys_addr, size, _PAGE_CACHE_WC, __builtin_return_address(0)); else diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/k8topology_64.c index 1f476e4..0ea66b5 100644 --- a/arch/x86/mm/k8topology_64.c +++ b/arch/x86/mm/k8topology_64.c @@ -22,6 +22,7 @@ #include <asm/numa.h> #include <asm/mpspec.h> #include <asm/apic.h> +#include <asm/k8.h> static __init int find_northbridge(void) { @@ -73,17 +74,12 @@ static __init void early_get_boot_cpu_id(void) int __init k8_scan_nodes(unsigned long start, unsigned long end) { + unsigned numnodes, cores, bits, apicid_base; unsigned long prevbase; struct bootnode nodes[8]; - int nodeid, i, nb; unsigned char nodeids[8]; - int found = 0; - u32 reg; - unsigned numnodes; - unsigned cores; - unsigned bits; - int j; - unsigned apicid_base; + int i, j, nb, found = 0; + u32 nodeid, reg; if (!early_pci_allowed()) return -1; @@ -105,7 +101,6 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end) prevbase = 0; for (i = 0; i < 8; i++) { unsigned long base, limit; - u32 nodeid; base = read_pci_config(0, nb, 1, 0x40 + i*8); limit = read_pci_config(0, nb, 1, 0x44 + i*8); diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 0a3f5e0..afd4005 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -844,7 +844,7 @@ int _set_memory_wc(unsigned long addr, int numpages) int set_memory_wc(unsigned long addr, int numpages) { - if (!pat_wc_enabled) + if (!pat_enabled) return set_memory_uc(addr, numpages); if (reserve_memtype(addr, addr + numpages * PAGE_SIZE, diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index 06b7a1c..a885a10 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -26,11 +26,11 @@ #include <asm/io.h> #ifdef CONFIG_X86_PAT -int __read_mostly pat_wc_enabled = 1; +int __read_mostly pat_enabled = 1; void __cpuinit pat_disable(char *reason) { - pat_wc_enabled = 0; + pat_enabled = 0; printk(KERN_INFO "%s\n", reason); } @@ -42,6 +42,19 @@ static int __init nopat(char *str) early_param("nopat", nopat); #endif + +static int debug_enable; +static int __init pat_debug_setup(char *str) +{ + debug_enable = 1; + return 0; +} +__setup("debugpat", pat_debug_setup); + +#define dprintk(fmt, arg...) \ + do { if (debug_enable) printk(KERN_INFO fmt, ##arg); } while (0) + + static u64 __read_mostly boot_pat_state; enum { @@ -53,24 +66,25 @@ enum { PAT_UC_MINUS = 7, /* UC, but can be overriden by MTRR */ }; -#define PAT(x,y) ((u64)PAT_ ## y << ((x)*8)) +#define PAT(x, y) ((u64)PAT_ ## y << ((x)*8)) void pat_init(void) { u64 pat; - if (!pat_wc_enabled) + if (!pat_enabled) return; /* Paranoia check. */ - if (!cpu_has_pat) { - printk(KERN_ERR "PAT enabled, but CPU feature cleared\n"); + if (!cpu_has_pat && boot_pat_state) { /* - * Panic if this happens on the secondary CPU, and we + * If this happens we are on a secondary CPU, but * switched to PAT on the boot CPU. We have no way to * undo PAT. - */ - BUG_ON(boot_pat_state); + */ + printk(KERN_ERR "PAT enabled, " + "but not supported by secondary CPU\n"); + BUG(); } /* Set PWT to Write-Combining. All other bits stay the same */ @@ -86,8 +100,8 @@ void pat_init(void) * 011 UC _PAGE_CACHE_UC * PAT bit unused */ - pat = PAT(0,WB) | PAT(1,WC) | PAT(2,UC_MINUS) | PAT(3,UC) | - PAT(4,WB) | PAT(5,WC) | PAT(6,UC_MINUS) | PAT(7,UC); + pat = PAT(0, WB) | PAT(1, WC) | PAT(2, UC_MINUS) | PAT(3, UC) | + PAT(4, WB) | PAT(5, WC) | PAT(6, UC_MINUS) | PAT(7, UC); /* Boot CPU check */ if (!boot_pat_state) @@ -103,11 +117,11 @@ void pat_init(void) static char *cattr_name(unsigned long flags) { switch (flags & _PAGE_CACHE_MASK) { - case _PAGE_CACHE_UC: return "uncached"; - case _PAGE_CACHE_UC_MINUS: return "uncached-minus"; - case _PAGE_CACHE_WB: return "write-back"; - case _PAGE_CACHE_WC: return "write-combining"; - default: return "broken"; + case _PAGE_CACHE_UC: return "uncached"; + case _PAGE_CACHE_UC_MINUS: return "uncached-minus"; + case _PAGE_CACHE_WB: return "write-back"; + case _PAGE_CACHE_WC: return "write-combining"; + default: return "broken"; } } @@ -145,47 +159,50 @@ static DEFINE_SPINLOCK(memtype_lock); /* protects memtype list */ * The intersection is based on "Effective Memory Type" tables in IA-32 * SDM vol 3a */ -static int pat_x_mtrr_type(u64 start, u64 end, unsigned long prot, - unsigned long *ret_prot) +static unsigned long pat_x_mtrr_type(u64 start, u64 end, unsigned long req_type) { - unsigned long pat_type; - u8 mtrr_type; - - pat_type = prot & _PAGE_CACHE_MASK; - prot &= (~_PAGE_CACHE_MASK); - - /* - * We return the PAT request directly for types where PAT takes - * precedence with respect to MTRR and for UC_MINUS. - * Consistency checks with other PAT requests is done later - * while going through memtype list. - */ - if (pat_type == _PAGE_CACHE_WC) { - *ret_prot = prot | _PAGE_CACHE_WC; - return 0; - } else if (pat_type == _PAGE_CACHE_UC_MINUS) { - *ret_prot = prot | _PAGE_CACHE_UC_MINUS; - return 0; - } else if (pat_type == _PAGE_CACHE_UC) { - *ret_prot = prot | _PAGE_CACHE_UC; - return 0; - } - /* * Look for MTRR hint to get the effective type in case where PAT * request is for WB. */ - mtrr_type = mtrr_type_lookup(start, end); + if (req_type == _PAGE_CACHE_WB) { + u8 mtrr_type; + + mtrr_type = mtrr_type_lookup(start, end); + if (mtrr_type == MTRR_TYPE_UNCACHABLE) + return _PAGE_CACHE_UC; + if (mtrr_type == MTRR_TYPE_WRCOMB) + return _PAGE_CACHE_WC; + } - if (mtrr_type == MTRR_TYPE_UNCACHABLE) { - *ret_prot = prot | _PAGE_CACHE_UC; - } else if (mtrr_type == MTRR_TYPE_WRCOMB) { - *ret_prot = prot | _PAGE_CACHE_WC; - } else { - *ret_prot = prot | _PAGE_CACHE_WB; + return req_type; +} + +static int chk_conflict(struct memtype *new, struct memtype *entry, + unsigned long *type) +{ + if (new->type != entry->type) { + if (type) { + new->type = entry->type; + *type = entry->type; + } else + goto conflict; } + /* check overlaps with more than one entry in the list */ + list_for_each_entry_continue(entry, &memtype_list, nd) { + if (new->end <= entry->start) + break; + else if (new->type != entry->type) + goto conflict; + } return 0; + + conflict: + printk(KERN_INFO "%s:%d conflicting memory types " + "%Lx-%Lx %s<->%s\n", current->comm, current->pid, new->start, + new->end, cattr_name(new->type), cattr_name(entry->type)); + return -EBUSY; } /* @@ -198,37 +215,36 @@ static int pat_x_mtrr_type(u64 start, u64 end, unsigned long prot, * req_type will have a special case value '-1', when requester want to inherit * the memory type from mtrr (if WB), existing PAT, defaulting to UC_MINUS. * - * If ret_type is NULL, function will return an error if it cannot reserve the - * region with req_type. If ret_type is non-null, function will return - * available type in ret_type in case of no error. In case of any error + * If new_type is NULL, function will return an error if it cannot reserve the + * region with req_type. If new_type is non-NULL, function will return + * available type in new_type in case of no error. In case of any error * it will return a negative return value. */ int reserve_memtype(u64 start, u64 end, unsigned long req_type, - unsigned long *ret_type) + unsigned long *new_type) { - struct memtype *new_entry = NULL; - struct memtype *parse; + struct memtype *new, *entry; unsigned long actual_type; + struct list_head *where; int err = 0; - /* Only track when pat_wc_enabled */ - if (!pat_wc_enabled) { + BUG_ON(start >= end); /* end is exclusive */ + + if (!pat_enabled) { /* This is identical to page table setting without PAT */ - if (ret_type) { - if (req_type == -1) { - *ret_type = _PAGE_CACHE_WB; - } else { - *ret_type = req_type; - } + if (new_type) { + if (req_type == -1) + *new_type = _PAGE_CACHE_WB; + else + *new_type = req_type & _PAGE_CACHE_MASK; } return 0; } /* Low ISA region is always mapped WB in page table. No need to track */ - if (start >= ISA_START_ADDRESS && (end - 1) <= ISA_END_ADDRESS) { - if (ret_type) - *ret_type = _PAGE_CACHE_WB; - + if (is_ISA_range(start, end - 1)) { + if (new_type) + *new_type = _PAGE_CACHE_WB; return 0; } @@ -241,206 +257,92 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, */ u8 mtrr_type = mtrr_type_lookup(start, end); - if (mtrr_type == MTRR_TYPE_WRBACK) { - req_type = _PAGE_CACHE_WB; + if (mtrr_type == MTRR_TYPE_WRBACK) actual_type = _PAGE_CACHE_WB; - } else { - req_type = _PAGE_CACHE_UC_MINUS; + else actual_type = _PAGE_CACHE_UC_MINUS; - } - } else { - req_type &= _PAGE_CACHE_MASK; - err = pat_x_mtrr_type(start, end, req_type, &actual_type); - } - - if (err) { - if (ret_type) - *ret_type = actual_type; - - return -EINVAL; - } + } else + actual_type = pat_x_mtrr_type(start, end, + req_type & _PAGE_CACHE_MASK); - new_entry = kmalloc(sizeof(struct memtype), GFP_KERNEL); - if (!new_entry) + new = kmalloc(sizeof(struct memtype), GFP_KERNEL); + if (!new) return -ENOMEM; - new_entry->start = start; - new_entry->end = end; - new_entry->type = actual_type; + new->start = start; + new->end = end; + new->type = actual_type; - if (ret_type) - *ret_type = actual_type; + if (new_type) + *new_type = actual_type; spin_lock(&memtype_lock); /* Search for existing mapping that overlaps the current range */ - list_for_each_entry(parse, &memtype_list, nd) { - struct memtype *saved_ptr; - - if (parse->start >= end) { - pr_debug("New Entry\n"); - list_add(&new_entry->nd, parse->nd.prev); - new_entry = NULL; + where = NULL; + list_for_each_entry(entry, &memtype_list, nd) { + if (end <= entry->start) { + where = entry->nd.prev; break; - } - - if (start <= parse->start && end >= parse->start) { - if (actual_type != parse->type && ret_type) { - actual_type = parse->type; - *ret_type = actual_type; - new_entry->type = actual_type; - } - - if (actual_type != parse->type) { - printk( - KERN_INFO "%s:%d conflicting memory types %Lx-%Lx %s<->%s\n", - current->comm, current->pid, - start, end, - cattr_name(actual_type), - cattr_name(parse->type)); - err = -EBUSY; - break; + } else if (start <= entry->start) { /* end > entry->start */ + err = chk_conflict(new, entry, new_type); + if (!err) { + dprintk("Overlap at 0x%Lx-0x%Lx\n", + entry->start, entry->end); + where = entry->nd.prev; } - - saved_ptr = parse; - /* - * Check to see whether the request overlaps more - * than one entry in the list - */ - list_for_each_entry_continue(parse, &memtype_list, nd) { - if (end <= parse->start) { - break; - } - - if (actual_type != parse->type) { - printk( - KERN_INFO "%s:%d conflicting memory types %Lx-%Lx %s<->%s\n", - current->comm, current->pid, - start, end, - cattr_name(actual_type), - cattr_name(parse->type)); - err = -EBUSY; - break; - } - } - - if (err) { - break; - } - - pr_debug("Overlap at 0x%Lx-0x%Lx\n", - saved_ptr->start, saved_ptr->end); - /* No conflict. Go ahead and add this new entry */ - list_add(&new_entry->nd, saved_ptr->nd.prev); - new_entry = NULL; break; - } - - if (start < parse->end) { - if (actual_type != parse->type && ret_type) { - actual_type = parse->type; - *ret_type = actual_type; - new_entry->type = actual_type; - } - - if (actual_type != parse->type) { - printk( - KERN_INFO "%s:%d conflicting memory types %Lx-%Lx %s<->%s\n", - current->comm, current->pid, - start, end, - cattr_name(actual_type), - cattr_name(parse->type)); - err = -EBUSY; - break; - } - - saved_ptr = parse; - /* - * Check to see whether the request overlaps more - * than one entry in the list - */ - list_for_each_entry_continue(parse, &memtype_list, nd) { - if (end <= parse->start) { - break; - } - - if (actual_type != parse->type) { - printk( - KERN_INFO "%s:%d conflicting memory types %Lx-%Lx %s<->%s\n", - current->comm, current->pid, - start, end, - cattr_name(actual_type), - cattr_name(parse->type)); - err = -EBUSY; - break; - } - } - - if (err) { - break; + } else if (start < entry->end) { /* start > entry->start */ + err = chk_conflict(new, entry, new_type); + if (!err) { + dprintk("Overlap at 0x%Lx-0x%Lx\n", + entry->start, entry->end); + where = &entry->nd; } - - pr_debug(KERN_INFO "Overlap at 0x%Lx-0x%Lx\n", - saved_ptr->start, saved_ptr->end); - /* No conflict. Go ahead and add this new entry */ - list_add(&new_entry->nd, &saved_ptr->nd); - new_entry = NULL; break; } } if (err) { - printk(KERN_INFO - "reserve_memtype failed 0x%Lx-0x%Lx, track %s, req %s\n", - start, end, cattr_name(new_entry->type), - cattr_name(req_type)); - kfree(new_entry); + printk(KERN_INFO "reserve_memtype failed 0x%Lx-0x%Lx, " + "track %s, req %s\n", + start, end, cattr_name(new->type), cattr_name(req_type)); + kfree(new); spin_unlock(&memtype_lock); return err; } - if (new_entry) { - /* No conflict. Not yet added to the list. Add to the tail */ - list_add_tail(&new_entry->nd, &memtype_list); - pr_debug("New Entry\n"); - } - - if (ret_type) { - pr_debug( - "reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s, ret %s\n", - start, end, cattr_name(actual_type), - cattr_name(req_type), cattr_name(*ret_type)); - } else { - pr_debug( - "reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s\n", - start, end, cattr_name(actual_type), - cattr_name(req_type)); - } + if (where) + list_add(&new->nd, where); + else + list_add_tail(&new->nd, &memtype_list); spin_unlock(&memtype_lock); + + dprintk("reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s, ret %s\n", + start, end, cattr_name(new->type), cattr_name(req_type), + new_type ? cattr_name(*new_type) : "-"); + return err; } int free_memtype(u64 start, u64 end) { - struct memtype *ml; + struct memtype *entry; int err = -EINVAL; - /* Only track when pat_wc_enabled */ - if (!pat_wc_enabled) { + if (!pat_enabled) return 0; - } /* Low ISA region is always mapped WB. No need to track */ - if (start >= ISA_START_ADDRESS && end <= ISA_END_ADDRESS) { + if (is_ISA_range(start, end - 1)) return 0; - } spin_lock(&memtype_lock); - list_for_each_entry(ml, &memtype_list, nd) { - if (ml->start == start && ml->end == end) { - list_del(&ml->nd); - kfree(ml); + list_for_each_entry(entry, &memtype_list, nd) { + if (entry->start == start && entry->end == end) { + list_del(&entry->nd); + kfree(entry); err = 0; break; } @@ -452,7 +354,7 @@ int free_memtype(u64 start, u64 end) current->comm, current->pid, start, end); } - pr_debug("free_memtype request 0x%Lx-0x%Lx\n", start, end); + dprintk("free_memtype request 0x%Lx-0x%Lx\n", start, end); return err; } @@ -521,12 +423,12 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, * caching for the high addresses through the KEN pin, but * we maintain the tradition of paranoia in this code. */ - if (!pat_wc_enabled && - ! ( test_bit(X86_FEATURE_MTRR, boot_cpu_data.x86_capability) || - test_bit(X86_FEATURE_K6_MTRR, boot_cpu_data.x86_capability) || - test_bit(X86_FEATURE_CYRIX_ARR, boot_cpu_data.x86_capability) || - test_bit(X86_FEATURE_CENTAUR_MCR, boot_cpu_data.x86_capability)) && - (pfn << PAGE_SHIFT) >= __pa(high_memory)) { + if (!pat_enabled && + !(boot_cpu_has(X86_FEATURE_MTRR) || + boot_cpu_has(X86_FEATURE_K6_MTRR) || + boot_cpu_has(X86_FEATURE_CYRIX_ARR) || + boot_cpu_has(X86_FEATURE_CENTAUR_MCR)) && + (pfn << PAGE_SHIFT) >= __pa(high_memory)) { flags = _PAGE_CACHE_UC; } #endif @@ -548,7 +450,7 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, return 0; if (pfn <= max_pfn_mapped && - ioremap_change_attr((unsigned long)__va(offset), size, flags) < 0) { + ioremap_change_attr((unsigned long)__va(offset), size, flags) < 0) { free_memtype(offset, offset + size); printk(KERN_INFO "%s:%d /dev/mem ioremap_change_attr failed %s for %Lx-%Lx\n", @@ -586,4 +488,3 @@ void unmap_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot) free_memtype(addr, addr + size); } - diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c index 5015976..ee1d6d3 100644 --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -255,7 +255,7 @@ int ptep_test_and_clear_young(struct vm_area_struct *vma, if (pte_young(*ptep)) ret = test_and_clear_bit(_PAGE_BIT_ACCESSED, - &ptep->pte); + (unsigned long *) &ptep->pte); if (ret) pte_update(vma->vm_mm, addr, ptep); diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 99649dc..391d510 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -495,6 +495,7 @@ int __node_distance(int a, int b) EXPORT_SYMBOL(__node_distance); +#if defined(CONFIG_MEMORY_HOTPLUG_SPARSE) || defined(CONFIG_ACPI_HOTPLUG_MEMORY) int memory_add_physaddr_to_nid(u64 start) { int i, ret = 0; @@ -506,4 +507,4 @@ int memory_add_physaddr_to_nid(u64 start) return ret; } EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); - +#endif diff --git a/arch/x86/pci/Makefile_32 b/arch/x86/pci/Makefile_32 index 89ec35d..f647e7e 100644 --- a/arch/x86/pci/Makefile_32 +++ b/arch/x86/pci/Makefile_32 @@ -22,3 +22,4 @@ pci-$(CONFIG_X86_NUMAQ) := numa.o irq.o pci-$(CONFIG_NUMA) += mp_bus_to_node.o obj-y += $(pci-y) common.o early.o +obj-y += amd_bus.o diff --git a/arch/x86/pci/Makefile_64 b/arch/x86/pci/Makefile_64 index 8fbd198..fd47068 100644 --- a/arch/x86/pci/Makefile_64 +++ b/arch/x86/pci/Makefile_64 @@ -13,5 +13,5 @@ obj-y += legacy.o irq.o common.o early.o # mmconfig has a 64bit special obj-$(CONFIG_PCI_MMCONFIG) += mmconfig_64.o direct.o mmconfig-shared.o -obj-y += k8-bus_64.o +obj-y += amd_bus.o diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index d95de2f..464279d 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -218,7 +218,6 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do return bus; } -extern int pci_routeirq; static int __init pci_acpi_init(void) { struct pci_dev *dev = NULL; diff --git a/arch/x86/pci/k8-bus_64.c b/arch/x86/pci/amd_bus.c index 5c2799c..15f505d 100644 --- a/arch/x86/pci/k8-bus_64.c +++ b/arch/x86/pci/amd_bus.c @@ -1,5 +1,9 @@ #include <linux/init.h> #include <linux/pci.h> +#include "pci.h" + +#ifdef CONFIG_X86_64 + #include <asm/pci-direct.h> #include <asm/mpspec.h> #include <linux/cpumask.h> @@ -526,3 +530,31 @@ static int __init early_fill_mp_bus_info(void) } postcore_initcall(early_fill_mp_bus_info); + +#endif + +/* common 32/64 bit code */ + +#define ENABLE_CF8_EXT_CFG (1ULL << 46) + +static void enable_pci_io_ecs_per_cpu(void *unused) +{ + u64 reg; + rdmsrl(MSR_AMD64_NB_CFG, reg); + if (!(reg & ENABLE_CF8_EXT_CFG)) { + reg |= ENABLE_CF8_EXT_CFG; + wrmsrl(MSR_AMD64_NB_CFG, reg); + } +} + +static int __init enable_pci_io_ecs(void) +{ + /* assume all cpus from fam10h have IO ECS */ + if (boot_cpu_data.x86 < 0x10) + return 0; + on_each_cpu(enable_pci_io_ecs_per_cpu, NULL, 1, 1); + pci_probe |= PCI_HAS_IO_ECS; + return 0; +} + +postcore_initcall(enable_pci_io_ecs); diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c index 21d1e0e..9915293 100644 --- a/arch/x86/pci/direct.c +++ b/arch/x86/pci/direct.c @@ -8,18 +8,21 @@ #include "pci.h" /* - * Functions for accessing PCI configuration space with type 1 accesses + * Functions for accessing PCI base (first 256 bytes) and extended + * (4096 bytes per PCI function) configuration space with type 1 + * accesses. */ #define PCI_CONF1_ADDRESS(bus, devfn, reg) \ - (0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3)) + (0x80000000 | ((reg & 0xF00) << 16) | (bus << 16) \ + | (devfn << 8) | (reg & 0xFC)) static int pci_conf1_read(unsigned int seg, unsigned int bus, unsigned int devfn, int reg, int len, u32 *value) { unsigned long flags; - if ((bus > 255) || (devfn > 255) || (reg > 255)) { + if ((bus > 255) || (devfn > 255) || (reg > 4095)) { *value = -1; return -EINVAL; } @@ -50,7 +53,7 @@ static int pci_conf1_write(unsigned int seg, unsigned int bus, { unsigned long flags; - if ((bus > 255) || (devfn > 255) || (reg > 255)) + if ((bus > 255) || (devfn > 255) || (reg > 4095)) return -EINVAL; spin_lock_irqsave(&pci_config_lock, flags); @@ -260,10 +263,18 @@ void __init pci_direct_init(int type) return; printk(KERN_INFO "PCI: Using configuration type %d for base access\n", type); - if (type == 1) + if (type == 1) { raw_pci_ops = &pci_direct_conf1; - else - raw_pci_ops = &pci_direct_conf2; + if (raw_pci_ext_ops) + return; + if (!(pci_probe & PCI_HAS_IO_ECS)) + return; + printk(KERN_INFO "PCI: Using configuration type 1 " + "for extended access\n"); + raw_pci_ext_ops = &pci_direct_conf1; + return; + } + raw_pci_ops = &pci_direct_conf2; } int __init pci_direct_probe(void) diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index 10fb308..6ccd7a1 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -299,9 +299,9 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, return -EINVAL; prot = pgprot_val(vma->vm_page_prot); - if (pat_wc_enabled && write_combine) + if (pat_enabled && write_combine) prot |= _PAGE_CACHE_WC; - else if (pat_wc_enabled || boot_cpu_data.x86 > 3) + else if (pat_enabled || boot_cpu_data.x86 > 3) /* * ioremap() and ioremap_nocache() defaults to UC MINUS for now. * To avoid attribute conflicts, request UC MINUS here diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index ca8df9c..f0859de 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -11,8 +11,8 @@ #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/dmi.h> -#include <asm/io.h> -#include <asm/smp.h> +#include <linux/io.h> +#include <linux/smp.h> #include <asm/io_apic.h> #include <linux/irq.h> #include <linux/acpi.h> @@ -61,7 +61,7 @@ void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL; * and perform checksum verification. */ -static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr) +static inline struct irq_routing_table *pirq_check_routing_table(u8 *addr) { struct irq_routing_table *rt; int i; @@ -74,7 +74,7 @@ static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr) rt->size < sizeof(struct irq_routing_table)) return NULL; sum = 0; - for (i=0; i < rt->size; i++) + for (i = 0; i < rt->size; i++) sum += addr[i]; if (!sum) { DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n", rt); @@ -100,7 +100,7 @@ static struct irq_routing_table * __init pirq_find_routing_table(void) return rt; printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n"); } - for(addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) { + for (addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) { rt = pirq_check_routing_table(addr); if (rt) return rt; @@ -122,20 +122,20 @@ static void __init pirq_peer_trick(void) struct irq_info *e; memset(busmap, 0, sizeof(busmap)); - for(i=0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) { + for (i = 0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) { e = &rt->slots[i]; #ifdef DEBUG { int j; DBG(KERN_DEBUG "%02x:%02x slot=%02x", e->bus, e->devfn/8, e->slot); - for(j=0; j<4; j++) + for (j = 0; j < 4; j++) DBG(" %d:%02x/%04x", j, e->irq[j].link, e->irq[j].bitmap); DBG("\n"); } #endif busmap[e->bus] = 1; } - for(i = 1; i < 256; i++) { + for (i = 1; i < 256; i++) { int node; if (!busmap[i] || pci_find_bus(0, i)) continue; @@ -285,7 +285,7 @@ static int pirq_ite_get(struct pci_dev *router, struct pci_dev *dev, int pirq) static const unsigned char pirqmap[4] = { 1, 0, 2, 3 }; WARN_ON_ONCE(pirq > 4); - return read_config_nybble(router,0x43, pirqmap[pirq-1]); + return read_config_nybble(router, 0x43, pirqmap[pirq-1]); } static int pirq_ite_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) @@ -314,7 +314,7 @@ static int pirq_opti_set(struct pci_dev *router, struct pci_dev *dev, int pirq, /* * Cyrix: nibble offset 0x5C - * 0x5C bits 7:4 is INTB bits 3:0 is INTA + * 0x5C bits 7:4 is INTB bits 3:0 is INTA * 0x5D bits 7:4 is INTD bits 3:0 is INTC */ static int pirq_cyrix_get(struct pci_dev *router, struct pci_dev *dev, int pirq) @@ -350,7 +350,7 @@ static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, * Apparently there are systems implementing PCI routing table using * link values 0x01-0x04 and others using 0x41-0x44 for PCI INTA..D. * We try our best to handle both link mappings. - * + * * Currently (2003-05-21) it appears most SiS chipsets follow the * definition of routing registers from the SiS-5595 southbridge. * According to the SiS 5595 datasheets the revision id's of the @@ -370,7 +370,7 @@ static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, * * 0x62: USBIRQ: * bit 6 OHCI function disabled (0), enabled (1) - * + * * 0x6a: ACPI/SCI IRQ: bits 4-6 reserved * * 0x7e: Data Acq. Module IRQ - bits 4-6 reserved @@ -487,9 +487,7 @@ static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq u8 irq; irq = 0; if (pirq <= 4) - { irq = read_config_nybble(router, 0x56, pirq - 1); - } printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n", dev->vendor, dev->device, pirq, irq); return irq; @@ -497,12 +495,10 @@ static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { - printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n", + printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n", dev->vendor, dev->device, pirq, irq); if (pirq <= 4) - { write_config_nybble(router, 0x56, pirq - 1, irq); - } return 1; } @@ -549,50 +545,49 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route if (pci_dev_present(pirq_440gx)) return 0; - switch(device) - { - case PCI_DEVICE_ID_INTEL_82371FB_0: - case PCI_DEVICE_ID_INTEL_82371SB_0: - case PCI_DEVICE_ID_INTEL_82371AB_0: - case PCI_DEVICE_ID_INTEL_82371MX: - case PCI_DEVICE_ID_INTEL_82443MX_0: - case PCI_DEVICE_ID_INTEL_82801AA_0: - case PCI_DEVICE_ID_INTEL_82801AB_0: - case PCI_DEVICE_ID_INTEL_82801BA_0: - case PCI_DEVICE_ID_INTEL_82801BA_10: - case PCI_DEVICE_ID_INTEL_82801CA_0: - case PCI_DEVICE_ID_INTEL_82801CA_12: - case PCI_DEVICE_ID_INTEL_82801DB_0: - case PCI_DEVICE_ID_INTEL_82801E_0: - case PCI_DEVICE_ID_INTEL_82801EB_0: - case PCI_DEVICE_ID_INTEL_ESB_1: - case PCI_DEVICE_ID_INTEL_ICH6_0: - case PCI_DEVICE_ID_INTEL_ICH6_1: - case PCI_DEVICE_ID_INTEL_ICH7_0: - case PCI_DEVICE_ID_INTEL_ICH7_1: - case PCI_DEVICE_ID_INTEL_ICH7_30: - case PCI_DEVICE_ID_INTEL_ICH7_31: - case PCI_DEVICE_ID_INTEL_ESB2_0: - case PCI_DEVICE_ID_INTEL_ICH8_0: - case PCI_DEVICE_ID_INTEL_ICH8_1: - case PCI_DEVICE_ID_INTEL_ICH8_2: - case PCI_DEVICE_ID_INTEL_ICH8_3: - case PCI_DEVICE_ID_INTEL_ICH8_4: - case PCI_DEVICE_ID_INTEL_ICH9_0: - case PCI_DEVICE_ID_INTEL_ICH9_1: - case PCI_DEVICE_ID_INTEL_ICH9_2: - case PCI_DEVICE_ID_INTEL_ICH9_3: - case PCI_DEVICE_ID_INTEL_ICH9_4: - case PCI_DEVICE_ID_INTEL_ICH9_5: - case PCI_DEVICE_ID_INTEL_TOLAPAI_0: - case PCI_DEVICE_ID_INTEL_ICH10_0: - case PCI_DEVICE_ID_INTEL_ICH10_1: - case PCI_DEVICE_ID_INTEL_ICH10_2: - case PCI_DEVICE_ID_INTEL_ICH10_3: - r->name = "PIIX/ICH"; - r->get = pirq_piix_get; - r->set = pirq_piix_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_INTEL_82371FB_0: + case PCI_DEVICE_ID_INTEL_82371SB_0: + case PCI_DEVICE_ID_INTEL_82371AB_0: + case PCI_DEVICE_ID_INTEL_82371MX: + case PCI_DEVICE_ID_INTEL_82443MX_0: + case PCI_DEVICE_ID_INTEL_82801AA_0: + case PCI_DEVICE_ID_INTEL_82801AB_0: + case PCI_DEVICE_ID_INTEL_82801BA_0: + case PCI_DEVICE_ID_INTEL_82801BA_10: + case PCI_DEVICE_ID_INTEL_82801CA_0: + case PCI_DEVICE_ID_INTEL_82801CA_12: + case PCI_DEVICE_ID_INTEL_82801DB_0: + case PCI_DEVICE_ID_INTEL_82801E_0: + case PCI_DEVICE_ID_INTEL_82801EB_0: + case PCI_DEVICE_ID_INTEL_ESB_1: + case PCI_DEVICE_ID_INTEL_ICH6_0: + case PCI_DEVICE_ID_INTEL_ICH6_1: + case PCI_DEVICE_ID_INTEL_ICH7_0: + case PCI_DEVICE_ID_INTEL_ICH7_1: + case PCI_DEVICE_ID_INTEL_ICH7_30: + case PCI_DEVICE_ID_INTEL_ICH7_31: + case PCI_DEVICE_ID_INTEL_ESB2_0: + case PCI_DEVICE_ID_INTEL_ICH8_0: + case PCI_DEVICE_ID_INTEL_ICH8_1: + case PCI_DEVICE_ID_INTEL_ICH8_2: + case PCI_DEVICE_ID_INTEL_ICH8_3: + case PCI_DEVICE_ID_INTEL_ICH8_4: + case PCI_DEVICE_ID_INTEL_ICH9_0: + case PCI_DEVICE_ID_INTEL_ICH9_1: + case PCI_DEVICE_ID_INTEL_ICH9_2: + case PCI_DEVICE_ID_INTEL_ICH9_3: + case PCI_DEVICE_ID_INTEL_ICH9_4: + case PCI_DEVICE_ID_INTEL_ICH9_5: + case PCI_DEVICE_ID_INTEL_TOLAPAI_0: + case PCI_DEVICE_ID_INTEL_ICH10_0: + case PCI_DEVICE_ID_INTEL_ICH10_1: + case PCI_DEVICE_ID_INTEL_ICH10_2: + case PCI_DEVICE_ID_INTEL_ICH10_3: + r->name = "PIIX/ICH"; + r->get = pirq_piix_get; + r->set = pirq_piix_set; + return 1; } return 0; } @@ -606,7 +601,7 @@ static __init int via_router_probe(struct irq_router *r, * workarounds for some buggy BIOSes */ if (device == PCI_DEVICE_ID_VIA_82C586_0) { - switch(router->device) { + switch (router->device) { case PCI_DEVICE_ID_VIA_82C686: /* * Asus k7m bios wrongly reports 82C686A @@ -631,7 +626,7 @@ static __init int via_router_probe(struct irq_router *r, } } - switch(device) { + switch (device) { case PCI_DEVICE_ID_VIA_82C586_0: r->name = "VIA"; r->get = pirq_via586_get; @@ -654,13 +649,12 @@ static __init int via_router_probe(struct irq_router *r, static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_VLSI_82C534: - r->name = "VLSI 82C534"; - r->get = pirq_vlsi_get; - r->set = pirq_vlsi_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_VLSI_82C534: + r->name = "VLSI 82C534"; + r->get = pirq_vlsi_get; + r->set = pirq_vlsi_set; + return 1; } return 0; } @@ -668,14 +662,13 @@ static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router static __init int serverworks_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_SERVERWORKS_OSB4: - case PCI_DEVICE_ID_SERVERWORKS_CSB5: - r->name = "ServerWorks"; - r->get = pirq_serverworks_get; - r->set = pirq_serverworks_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_SERVERWORKS_OSB4: + case PCI_DEVICE_ID_SERVERWORKS_CSB5: + r->name = "ServerWorks"; + r->get = pirq_serverworks_get; + r->set = pirq_serverworks_set; + return 1; } return 0; } @@ -684,7 +677,7 @@ static __init int sis_router_probe(struct irq_router *r, struct pci_dev *router, { if (device != PCI_DEVICE_ID_SI_503) return 0; - + r->name = "SIS"; r->get = pirq_sis_get; r->set = pirq_sis_set; @@ -693,47 +686,43 @@ static __init int sis_router_probe(struct irq_router *r, struct pci_dev *router, static __init int cyrix_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_CYRIX_5520: - r->name = "NatSemi"; - r->get = pirq_cyrix_get; - r->set = pirq_cyrix_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_CYRIX_5520: + r->name = "NatSemi"; + r->get = pirq_cyrix_get; + r->set = pirq_cyrix_set; + return 1; } return 0; } static __init int opti_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_OPTI_82C700: - r->name = "OPTI"; - r->get = pirq_opti_get; - r->set = pirq_opti_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_OPTI_82C700: + r->name = "OPTI"; + r->get = pirq_opti_get; + r->set = pirq_opti_set; + return 1; } return 0; } static __init int ite_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_ITE_IT8330G_0: - r->name = "ITE"; - r->get = pirq_ite_get; - r->set = pirq_ite_set; - return 1; + switch (device) { + case PCI_DEVICE_ID_ITE_IT8330G_0: + r->name = "ITE"; + r->get = pirq_ite_get; + r->set = pirq_ite_set; + return 1; } return 0; } static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { + switch (device) { case PCI_DEVICE_ID_AL_M1533: case PCI_DEVICE_ID_AL_M1563: printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n"); @@ -747,25 +736,24 @@ static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, static __init int amd_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { - switch(device) - { - case PCI_DEVICE_ID_AMD_VIPER_740B: - r->name = "AMD756"; - break; - case PCI_DEVICE_ID_AMD_VIPER_7413: - r->name = "AMD766"; - break; - case PCI_DEVICE_ID_AMD_VIPER_7443: - r->name = "AMD768"; - break; - default: - return 0; + switch (device) { + case PCI_DEVICE_ID_AMD_VIPER_740B: + r->name = "AMD756"; + break; + case PCI_DEVICE_ID_AMD_VIPER_7413: + r->name = "AMD766"; + break; + case PCI_DEVICE_ID_AMD_VIPER_7443: + r->name = "AMD768"; + break; + default: + return 0; } r->get = pirq_amd756_get; r->set = pirq_amd756_set; return 1; } - + static __init int pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) { switch (device) { @@ -807,7 +795,7 @@ static struct pci_dev *pirq_router_dev; * FIXME: should we have an option to say "generic for * chipset" ? */ - + static void __init pirq_find_router(struct irq_router *r) { struct irq_routing_table *rt = pirq_table; @@ -826,7 +814,7 @@ static void __init pirq_find_router(struct irq_router *r) r->name = "default"; r->get = NULL; r->set = NULL; - + DBG(KERN_DEBUG "PCI: Attempting to find IRQ router for %04x:%04x\n", rt->rtr_vendor, rt->rtr_device); @@ -837,7 +825,7 @@ static void __init pirq_find_router(struct irq_router *r) return; } - for( h = pirq_routers; h->vendor; h++) { + for (h = pirq_routers; h->vendor; h++) { /* First look for a router match */ if (rt->rtr_vendor == h->vendor && h->probe(r, pirq_router_dev, rt->rtr_device)) break; @@ -889,7 +877,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) if (!pirq_table) return 0; - + DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin); info = pirq_get_info(dev); if (!info) { @@ -928,8 +916,10 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) */ newirq = dev->irq; if (newirq && !((1 << newirq) & mask)) { - if ( pci_probe & PCI_USE_PIRQ_MASK) newirq = 0; - else printk("\n" KERN_WARNING + if (pci_probe & PCI_USE_PIRQ_MASK) + newirq = 0; + else + printk("\n" KERN_WARNING "PCI: IRQ %i for device %s doesn't match PIRQ mask " "- try pci=usepirqmask\n" KERN_DEBUG, newirq, pci_name(dev)); @@ -949,8 +939,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) irq = pirq & 0xf; DBG(" -> hardcoded IRQ %d\n", irq); msg = "Hardcoded"; - } else if ( r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \ - ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask)) ) { + } else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \ + ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) { DBG(" -> got IRQ %d\n", irq); msg = "Found"; eisa_set_level_irq(irq); @@ -985,15 +975,15 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) continue; if (info->irq[pin].link == pirq) { /* We refuse to override the dev->irq information. Give a warning! */ - if ( dev2->irq && dev2->irq != irq && \ + if (dev2->irq && dev2->irq != irq && \ (!(pci_probe & PCI_USE_PIRQ_MASK) || \ - ((1 << dev2->irq) & mask)) ) { + ((1 << dev2->irq) & mask))) { #ifndef CONFIG_PCI_MSI - printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n", + printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n", pci_name(dev2), dev2->irq, irq); #endif - continue; - } + continue; + } dev2->irq = irq; pirq_penalty[irq]++; if (dev != dev2) @@ -1031,8 +1021,7 @@ static void __init pcibios_fixup_irqs(void) /* * Recalculate IRQ numbers if we use the I/O APIC. */ - if (io_apic_assign_pci_irqs) - { + if (io_apic_assign_pci_irqs) { int irq; if (pin) { @@ -1045,10 +1034,10 @@ static void __init pcibios_fixup_irqs(void) * busses itself so we should get into this branch reliably. */ if (irq < 0 && dev->bus->parent) { /* go back to the bridge */ - struct pci_dev * bridge = dev->bus->self; + struct pci_dev *bridge = dev->bus->self; pin = (pin + PCI_SLOT(dev->devfn)) % 4; - irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, + irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, PCI_SLOT(bridge->devfn), pin); if (irq >= 0) printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n", @@ -1138,7 +1127,7 @@ static int __init pcibios_irq_init(void) pirq_find_router(&pirq_router); if (pirq_table->exclusive_irqs) { int i; - for (i=0; i<16; i++) + for (i = 0; i < 16; i++) if (!(pirq_table->exclusive_irqs & (1 << i))) pirq_penalty[i] += 100; } @@ -1203,10 +1192,10 @@ static int pirq_enable_irq(struct pci_dev *dev) */ temp_dev = dev; while (irq < 0 && dev->bus->parent) { /* go back to the bridge */ - struct pci_dev * bridge = dev->bus->self; + struct pci_dev *bridge = dev->bus->self; pin = (pin + PCI_SLOT(dev->devfn)) % 4; - irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, + irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, PCI_SLOT(bridge->devfn), pin); if (irq >= 0) printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n", diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index 0cfebec..23faaa8 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -374,7 +374,7 @@ reject: static int __initdata known_bridge; -void __init __pci_mmcfg_init(int early) +static void __init __pci_mmcfg_init(int early) { /* MMCONFIG disabled */ if ((pci_probe & PCI_PROBE_MMCONF) == 0) diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h index 720c4c5..ba263e6 100644 --- a/arch/x86/pci/pci.h +++ b/arch/x86/pci/pci.h @@ -27,6 +27,7 @@ #define PCI_CAN_SKIP_ISA_ALIGN 0x8000 #define PCI_USE__CRS 0x10000 #define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000 +#define PCI_HAS_IO_ECS 0x40000 extern unsigned int pci_probe; extern unsigned long pirq_table_addr; diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c index 3fdd514..19a6cfa 100644 --- a/arch/x86/vdso/vma.c +++ b/arch/x86/vdso/vma.c @@ -16,7 +16,7 @@ #include "vextern.h" /* Just for VMAGIC. */ #undef VEXTERN -int vdso_enabled = 1; +unsigned int __read_mostly vdso_enabled = 1; extern char vdso_start[], vdso_end[]; extern unsigned short vdso_sync_cpuid; diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig index 6c388e5..c2cc995 100644 --- a/arch/x86/xen/Kconfig +++ b/arch/x86/xen/Kconfig @@ -12,3 +12,13 @@ config XEN This is the Linux Xen port. Enabling this will allow the kernel to boot in a paravirtualized environment under the Xen hypervisor. + +config XEN_MAX_DOMAIN_MEMORY + int "Maximum allowed size of a domain in gigabytes" + default 8 + depends on XEN + help + The pseudo-physical to machine address array is sized + according to the maximum possible memory size of a Xen + domain. This array uses 1 page per gigabyte, so there's no + need to be too stingy here.
\ No newline at end of file diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile index 3d8df98..2ba2d16 100644 --- a/arch/x86/xen/Makefile +++ b/arch/x86/xen/Makefile @@ -1,4 +1,4 @@ obj-y := enlighten.o setup.o multicalls.o mmu.o \ - time.o manage.o xen-asm.o grant-table.o + time.o xen-asm.o grant-table.o suspend.o obj-$(CONFIG_SMP) += smp.o diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index f09c1c6..bd74229 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -75,13 +75,13 @@ DEFINE_PER_CPU(unsigned long, xen_current_cr3); /* actual vcpu cr3 */ struct start_info *xen_start_info; EXPORT_SYMBOL_GPL(xen_start_info); -static /* __initdata */ struct shared_info dummy_shared_info; +struct shared_info xen_dummy_shared_info; /* * Point at some empty memory to start with. We map the real shared_info * page as soon as fixmap is up and running. */ -struct shared_info *HYPERVISOR_shared_info = (void *)&dummy_shared_info; +struct shared_info *HYPERVISOR_shared_info = (void *)&xen_dummy_shared_info; /* * Flag to determine whether vcpu info placement is available on all @@ -98,13 +98,13 @@ struct shared_info *HYPERVISOR_shared_info = (void *)&dummy_shared_info; */ static int have_vcpu_info_placement = 1; -static void __init xen_vcpu_setup(int cpu) +static void xen_vcpu_setup(int cpu) { struct vcpu_register_vcpu_info info; int err; struct vcpu_info *vcpup; - BUG_ON(HYPERVISOR_shared_info == &dummy_shared_info); + BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info); per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; if (!have_vcpu_info_placement) @@ -136,11 +136,41 @@ static void __init xen_vcpu_setup(int cpu) } } +/* + * On restore, set the vcpu placement up again. + * If it fails, then we're in a bad state, since + * we can't back out from using it... + */ +void xen_vcpu_restore(void) +{ + if (have_vcpu_info_placement) { + int cpu; + + for_each_online_cpu(cpu) { + bool other_cpu = (cpu != smp_processor_id()); + + if (other_cpu && + HYPERVISOR_vcpu_op(VCPUOP_down, cpu, NULL)) + BUG(); + + xen_vcpu_setup(cpu); + + if (other_cpu && + HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL)) + BUG(); + } + + BUG_ON(!have_vcpu_info_placement); + } +} + static void __init xen_banner(void) { printk(KERN_INFO "Booting paravirtualized kernel on %s\n", pv_info.name); - printk(KERN_INFO "Hypervisor signature: %s\n", xen_start_info->magic); + printk(KERN_INFO "Hypervisor signature: %s%s\n", + xen_start_info->magic, + xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : ""); } static void xen_cpuid(unsigned int *ax, unsigned int *bx, @@ -235,13 +265,13 @@ static void xen_irq_enable(void) { struct vcpu_info *vcpu; - /* There's a one instruction preempt window here. We need to - make sure we're don't switch CPUs between getting the vcpu - pointer and updating the mask. */ - preempt_disable(); + /* We don't need to worry about being preempted here, since + either a) interrupts are disabled, so no preemption, or b) + the caller is confused and is trying to re-enable interrupts + on an indeterminate processor. */ + vcpu = x86_read_percpu(xen_vcpu); vcpu->evtchn_upcall_mask = 0; - preempt_enable_no_resched(); /* Doesn't matter if we get preempted here, because any pending event will get dealt with anyway. */ @@ -254,7 +284,7 @@ static void xen_irq_enable(void) static void xen_safe_halt(void) { /* Blocking includes an implicit local_irq_enable(). */ - if (HYPERVISOR_sched_op(SCHEDOP_block, 0) != 0) + if (HYPERVISOR_sched_op(SCHEDOP_block, NULL) != 0) BUG(); } @@ -607,6 +637,30 @@ static void xen_flush_tlb_others(const cpumask_t *cpus, struct mm_struct *mm, xen_mc_issue(PARAVIRT_LAZY_MMU); } +static void xen_clts(void) +{ + struct multicall_space mcs; + + mcs = xen_mc_entry(0); + + MULTI_fpu_taskswitch(mcs.mc, 0); + + xen_mc_issue(PARAVIRT_LAZY_CPU); +} + +static void xen_write_cr0(unsigned long cr0) +{ + struct multicall_space mcs; + + /* Only pay attention to cr0.TS; everything else is + ignored. */ + mcs = xen_mc_entry(0); + + MULTI_fpu_taskswitch(mcs.mc, (cr0 & X86_CR0_TS) != 0); + + xen_mc_issue(PARAVIRT_LAZY_CPU); +} + static void xen_write_cr2(unsigned long cr2) { x86_read_percpu(xen_vcpu)->arch.cr2 = cr2; @@ -624,8 +678,10 @@ static unsigned long xen_read_cr2_direct(void) static void xen_write_cr4(unsigned long cr4) { - /* Just ignore cr4 changes; Xen doesn't allow us to do - anything anyway. */ + cr4 &= ~X86_CR4_PGE; + cr4 &= ~X86_CR4_PSE; + + native_write_cr4(cr4); } static unsigned long xen_read_cr3(void) @@ -831,7 +887,7 @@ static __init void xen_pagetable_setup_start(pgd_t *base) PFN_DOWN(__pa(xen_start_info->pt_base))); } -static __init void setup_shared_info(void) +void xen_setup_shared_info(void) { if (!xen_feature(XENFEAT_auto_translated_physmap)) { unsigned long addr = fix_to_virt(FIX_PARAVIRT_BOOTMAP); @@ -854,6 +910,8 @@ static __init void setup_shared_info(void) /* In UP this is as good a place as any to set up shared info */ xen_setup_vcpu_info_placement(); #endif + + xen_setup_mfn_list_list(); } static __init void xen_pagetable_setup_done(pgd_t *base) @@ -866,15 +924,23 @@ static __init void xen_pagetable_setup_done(pgd_t *base) pv_mmu_ops.release_pmd = xen_release_pmd; pv_mmu_ops.set_pte = xen_set_pte; - setup_shared_info(); + xen_setup_shared_info(); /* Actually pin the pagetable down, but we can't set PG_pinned yet because the page structures don't exist yet. */ pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(base))); } +static __init void xen_post_allocator_init(void) +{ + pv_mmu_ops.set_pmd = xen_set_pmd; + pv_mmu_ops.set_pud = xen_set_pud; + + xen_mark_init_mm_pinned(); +} + /* This is called once we have the cpu_possible_map */ -void __init xen_setup_vcpu_info_placement(void) +void xen_setup_vcpu_info_placement(void) { int cpu; @@ -960,7 +1026,7 @@ static const struct pv_init_ops xen_init_ops __initdata = { .banner = xen_banner, .memory_setup = xen_memory_setup, .arch_setup = xen_arch_setup, - .post_allocator_init = xen_mark_init_mm_pinned, + .post_allocator_init = xen_post_allocator_init, }; static const struct pv_time_ops xen_time_ops __initdata = { @@ -978,10 +1044,10 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = { .set_debugreg = xen_set_debugreg, .get_debugreg = xen_get_debugreg, - .clts = native_clts, + .clts = xen_clts, .read_cr0 = native_read_cr0, - .write_cr0 = native_write_cr0, + .write_cr0 = xen_write_cr0, .read_cr4 = native_read_cr4, .read_cr4_safe = native_read_cr4_safe, @@ -1072,9 +1138,13 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .set_pte = NULL, /* see xen_pagetable_setup_* */ .set_pte_at = xen_set_pte_at, - .set_pmd = xen_set_pmd, + .set_pmd = xen_set_pmd_hyper, + + .ptep_modify_prot_start = __ptep_modify_prot_start, + .ptep_modify_prot_commit = __ptep_modify_prot_commit, .pte_val = xen_pte_val, + .pte_flags = native_pte_val, .pgd_val = xen_pgd_val, .make_pte = xen_make_pte, @@ -1082,7 +1152,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .set_pte_atomic = xen_set_pte_atomic, .set_pte_present = xen_set_pte_at, - .set_pud = xen_set_pud, + .set_pud = xen_set_pud_hyper, .pte_clear = xen_pte_clear, .pmd_clear = xen_pmd_clear, @@ -1114,11 +1184,13 @@ static const struct smp_ops xen_smp_ops __initdata = { static void xen_reboot(int reason) { + struct sched_shutdown r = { .reason = reason }; + #ifdef CONFIG_SMP smp_send_stop(); #endif - if (HYPERVISOR_sched_op(SCHEDOP_shutdown, reason)) + if (HYPERVISOR_sched_op(SCHEDOP_shutdown, &r)) BUG(); } @@ -1173,6 +1245,8 @@ asmlinkage void __init xen_start_kernel(void) BUG_ON(memcmp(xen_start_info->magic, "xen-3", 5) != 0); + xen_setup_features(); + /* Install Xen paravirt ops */ pv_info = xen_info; pv_init_ops = xen_init_ops; @@ -1182,17 +1256,20 @@ asmlinkage void __init xen_start_kernel(void) pv_apic_ops = xen_apic_ops; pv_mmu_ops = xen_mmu_ops; + if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) { + pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start; + pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit; + } + machine_ops = xen_machine_ops; #ifdef CONFIG_SMP smp_ops = xen_smp_ops; #endif - xen_setup_features(); - /* Get mfn list */ if (!xen_feature(XENFEAT_auto_translated_physmap)) - phys_to_machine_mapping = (unsigned long *)xen_start_info->mfn_list; + xen_build_dynamic_phys_to_machine(); pgd = (pgd_t *)xen_start_info->pt_base; @@ -1232,8 +1309,11 @@ asmlinkage void __init xen_start_kernel(void) ? __pa(xen_start_info->mod_start) : 0; boot_params.hdr.ramdisk_size = xen_start_info->mod_len; - if (!is_initial_xendomain()) + if (!is_initial_xendomain()) { + add_preferred_console("xenboot", 0, NULL); + add_preferred_console("tty", 0, NULL); add_preferred_console("hvc", 0, NULL); + } /* Start the world */ start_kernel(); diff --git a/arch/x86/xen/manage.c b/arch/x86/xen/manage.c deleted file mode 100644 index aa7af9e..0000000 --- a/arch/x86/xen/manage.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Handle extern requests for shutdown, reboot and sysrq - */ -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/reboot.h> -#include <linux/sysrq.h> - -#include <xen/xenbus.h> - -#define SHUTDOWN_INVALID -1 -#define SHUTDOWN_POWEROFF 0 -#define SHUTDOWN_SUSPEND 2 -/* Code 3 is SHUTDOWN_CRASH, which we don't use because the domain can only - * report a crash, not be instructed to crash! - * HALT is the same as POWEROFF, as far as we're concerned. The tools use - * the distinction when we return the reason code to them. - */ -#define SHUTDOWN_HALT 4 - -/* Ignore multiple shutdown requests. */ -static int shutting_down = SHUTDOWN_INVALID; - -static void shutdown_handler(struct xenbus_watch *watch, - const char **vec, unsigned int len) -{ - char *str; - struct xenbus_transaction xbt; - int err; - - if (shutting_down != SHUTDOWN_INVALID) - return; - - again: - err = xenbus_transaction_start(&xbt); - if (err) - return; - - str = (char *)xenbus_read(xbt, "control", "shutdown", NULL); - /* Ignore read errors and empty reads. */ - if (XENBUS_IS_ERR_READ(str)) { - xenbus_transaction_end(xbt, 1); - return; - } - - xenbus_write(xbt, "control", "shutdown", ""); - - err = xenbus_transaction_end(xbt, 0); - if (err == -EAGAIN) { - kfree(str); - goto again; - } - - if (strcmp(str, "poweroff") == 0 || - strcmp(str, "halt") == 0) - orderly_poweroff(false); - else if (strcmp(str, "reboot") == 0) - ctrl_alt_del(); - else { - printk(KERN_INFO "Ignoring shutdown request: %s\n", str); - shutting_down = SHUTDOWN_INVALID; - } - - kfree(str); -} - -static void sysrq_handler(struct xenbus_watch *watch, const char **vec, - unsigned int len) -{ - char sysrq_key = '\0'; - struct xenbus_transaction xbt; - int err; - - again: - err = xenbus_transaction_start(&xbt); - if (err) - return; - if (!xenbus_scanf(xbt, "control", "sysrq", "%c", &sysrq_key)) { - printk(KERN_ERR "Unable to read sysrq code in " - "control/sysrq\n"); - xenbus_transaction_end(xbt, 1); - return; - } - - if (sysrq_key != '\0') - xenbus_printf(xbt, "control", "sysrq", "%c", '\0'); - - err = xenbus_transaction_end(xbt, 0); - if (err == -EAGAIN) - goto again; - - if (sysrq_key != '\0') - handle_sysrq(sysrq_key, NULL); -} - -static struct xenbus_watch shutdown_watch = { - .node = "control/shutdown", - .callback = shutdown_handler -}; - -static struct xenbus_watch sysrq_watch = { - .node = "control/sysrq", - .callback = sysrq_handler -}; - -static int setup_shutdown_watcher(void) -{ - int err; - - err = register_xenbus_watch(&shutdown_watch); - if (err) { - printk(KERN_ERR "Failed to set shutdown watcher\n"); - return err; - } - - err = register_xenbus_watch(&sysrq_watch); - if (err) { - printk(KERN_ERR "Failed to set sysrq watcher\n"); - return err; - } - - return 0; -} - -static int shutdown_event(struct notifier_block *notifier, - unsigned long event, - void *data) -{ - setup_shutdown_watcher(); - return NOTIFY_DONE; -} - -static int __init setup_shutdown_event(void) -{ - static struct notifier_block xenstore_notifier = { - .notifier_call = shutdown_event - }; - register_xenstore_notifier(&xenstore_notifier); - - return 0; -} - -subsys_initcall(setup_shutdown_event); diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 4e527e7..42b3b9e 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -56,6 +56,131 @@ #include "multicalls.h" #include "mmu.h" +#define P2M_ENTRIES_PER_PAGE (PAGE_SIZE / sizeof(unsigned long)) +#define TOP_ENTRIES (MAX_DOMAIN_PAGES / P2M_ENTRIES_PER_PAGE) + +/* Placeholder for holes in the address space */ +static unsigned long p2m_missing[P2M_ENTRIES_PER_PAGE] + __attribute__((section(".data.page_aligned"))) = + { [ 0 ... P2M_ENTRIES_PER_PAGE-1 ] = ~0UL }; + + /* Array of pointers to pages containing p2m entries */ +static unsigned long *p2m_top[TOP_ENTRIES] + __attribute__((section(".data.page_aligned"))) = + { [ 0 ... TOP_ENTRIES - 1] = &p2m_missing[0] }; + +/* Arrays of p2m arrays expressed in mfns used for save/restore */ +static unsigned long p2m_top_mfn[TOP_ENTRIES] + __attribute__((section(".bss.page_aligned"))); + +static unsigned long p2m_top_mfn_list[ + PAGE_ALIGN(TOP_ENTRIES / P2M_ENTRIES_PER_PAGE)] + __attribute__((section(".bss.page_aligned"))); + +static inline unsigned p2m_top_index(unsigned long pfn) +{ + BUG_ON(pfn >= MAX_DOMAIN_PAGES); + return pfn / P2M_ENTRIES_PER_PAGE; +} + +static inline unsigned p2m_index(unsigned long pfn) +{ + return pfn % P2M_ENTRIES_PER_PAGE; +} + +/* Build the parallel p2m_top_mfn structures */ +void xen_setup_mfn_list_list(void) +{ + unsigned pfn, idx; + + for(pfn = 0; pfn < MAX_DOMAIN_PAGES; pfn += P2M_ENTRIES_PER_PAGE) { + unsigned topidx = p2m_top_index(pfn); + + p2m_top_mfn[topidx] = virt_to_mfn(p2m_top[topidx]); + } + + for(idx = 0; idx < ARRAY_SIZE(p2m_top_mfn_list); idx++) { + unsigned topidx = idx * P2M_ENTRIES_PER_PAGE; + p2m_top_mfn_list[idx] = virt_to_mfn(&p2m_top_mfn[topidx]); + } + + BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info); + + HYPERVISOR_shared_info->arch.pfn_to_mfn_frame_list_list = + virt_to_mfn(p2m_top_mfn_list); + HYPERVISOR_shared_info->arch.max_pfn = xen_start_info->nr_pages; +} + +/* Set up p2m_top to point to the domain-builder provided p2m pages */ +void __init xen_build_dynamic_phys_to_machine(void) +{ + unsigned long *mfn_list = (unsigned long *)xen_start_info->mfn_list; + unsigned long max_pfn = min(MAX_DOMAIN_PAGES, xen_start_info->nr_pages); + unsigned pfn; + + for(pfn = 0; pfn < max_pfn; pfn += P2M_ENTRIES_PER_PAGE) { + unsigned topidx = p2m_top_index(pfn); + + p2m_top[topidx] = &mfn_list[pfn]; + } +} + +unsigned long get_phys_to_machine(unsigned long pfn) +{ + unsigned topidx, idx; + + if (unlikely(pfn >= MAX_DOMAIN_PAGES)) + return INVALID_P2M_ENTRY; + + topidx = p2m_top_index(pfn); + idx = p2m_index(pfn); + return p2m_top[topidx][idx]; +} +EXPORT_SYMBOL_GPL(get_phys_to_machine); + +static void alloc_p2m(unsigned long **pp, unsigned long *mfnp) +{ + unsigned long *p; + unsigned i; + + p = (void *)__get_free_page(GFP_KERNEL | __GFP_NOFAIL); + BUG_ON(p == NULL); + + for(i = 0; i < P2M_ENTRIES_PER_PAGE; i++) + p[i] = INVALID_P2M_ENTRY; + + if (cmpxchg(pp, p2m_missing, p) != p2m_missing) + free_page((unsigned long)p); + else + *mfnp = virt_to_mfn(p); +} + +void set_phys_to_machine(unsigned long pfn, unsigned long mfn) +{ + unsigned topidx, idx; + + if (unlikely(xen_feature(XENFEAT_auto_translated_physmap))) { + BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY); + return; + } + + if (unlikely(pfn >= MAX_DOMAIN_PAGES)) { + BUG_ON(mfn != INVALID_P2M_ENTRY); + return; + } + + topidx = p2m_top_index(pfn); + if (p2m_top[topidx] == p2m_missing) { + /* no need to allocate a page to store an invalid entry */ + if (mfn == INVALID_P2M_ENTRY) + return; + alloc_p2m(&p2m_top[topidx], &p2m_top_mfn[topidx]); + } + + idx = p2m_index(pfn); + p2m_top[topidx][idx] = mfn; +} + xmaddr_t arbitrary_virt_to_machine(unsigned long address) { unsigned int level; @@ -98,24 +223,60 @@ void make_lowmem_page_readwrite(void *vaddr) } -void xen_set_pmd(pmd_t *ptr, pmd_t val) +static bool page_pinned(void *ptr) +{ + struct page *page = virt_to_page(ptr); + + return PagePinned(page); +} + +static void extend_mmu_update(const struct mmu_update *update) { struct multicall_space mcs; struct mmu_update *u; - preempt_disable(); + mcs = xen_mc_extend_args(__HYPERVISOR_mmu_update, sizeof(*u)); + + if (mcs.mc != NULL) + mcs.mc->args[1]++; + else { + mcs = __xen_mc_entry(sizeof(*u)); + MULTI_mmu_update(mcs.mc, mcs.args, 1, NULL, DOMID_SELF); + } - mcs = xen_mc_entry(sizeof(*u)); u = mcs.args; - u->ptr = virt_to_machine(ptr).maddr; - u->val = pmd_val_ma(val); - MULTI_mmu_update(mcs.mc, u, 1, NULL, DOMID_SELF); + *u = *update; +} + +void xen_set_pmd_hyper(pmd_t *ptr, pmd_t val) +{ + struct mmu_update u; + + preempt_disable(); + + xen_mc_batch(); + + u.ptr = virt_to_machine(ptr).maddr; + u.val = pmd_val_ma(val); + extend_mmu_update(&u); xen_mc_issue(PARAVIRT_LAZY_MMU); preempt_enable(); } +void xen_set_pmd(pmd_t *ptr, pmd_t val) +{ + /* If page is not pinned, we can just update the entry + directly */ + if (!page_pinned(ptr)) { + *ptr = val; + return; + } + + xen_set_pmd_hyper(ptr, val); +} + /* * Associate a virtual page frame with a given physical page frame * and protection flags for that frame. @@ -179,6 +340,26 @@ out: preempt_enable(); } +pte_t xen_ptep_modify_prot_start(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + /* Just return the pte as-is. We preserve the bits on commit */ + return *ptep; +} + +void xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte) +{ + struct mmu_update u; + + xen_mc_batch(); + + u.ptr = virt_to_machine(ptep).maddr | MMU_PT_UPDATE_PRESERVE_AD; + u.val = pte_val_ma(pte); + extend_mmu_update(&u); + + xen_mc_issue(PARAVIRT_LAZY_MMU); +} + /* Assume pteval_t is equivalent to all the other *val_t types. */ static pteval_t pte_mfn_to_pfn(pteval_t val) { @@ -229,24 +410,35 @@ pmdval_t xen_pmd_val(pmd_t pmd) return pte_mfn_to_pfn(pmd.pmd); } -void xen_set_pud(pud_t *ptr, pud_t val) +void xen_set_pud_hyper(pud_t *ptr, pud_t val) { - struct multicall_space mcs; - struct mmu_update *u; + struct mmu_update u; preempt_disable(); - mcs = xen_mc_entry(sizeof(*u)); - u = mcs.args; - u->ptr = virt_to_machine(ptr).maddr; - u->val = pud_val_ma(val); - MULTI_mmu_update(mcs.mc, u, 1, NULL, DOMID_SELF); + xen_mc_batch(); + + u.ptr = virt_to_machine(ptr).maddr; + u.val = pud_val_ma(val); + extend_mmu_update(&u); xen_mc_issue(PARAVIRT_LAZY_MMU); preempt_enable(); } +void xen_set_pud(pud_t *ptr, pud_t val) +{ + /* If page is not pinned, we can just update the entry + directly */ + if (!page_pinned(ptr)) { + *ptr = val; + return; + } + + xen_set_pud_hyper(ptr, val); +} + void xen_set_pte(pte_t *ptep, pte_t pte) { ptep->pte_high = pte.pte_high; @@ -268,7 +460,7 @@ void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) void xen_pmd_clear(pmd_t *pmdp) { - xen_set_pmd(pmdp, __pmd(0)); + set_pmd(pmdp, __pmd(0)); } pmd_t xen_make_pmd(pmdval_t pmd) @@ -441,6 +633,29 @@ void xen_pgd_pin(pgd_t *pgd) xen_mc_issue(0); } +/* + * On save, we need to pin all pagetables to make sure they get their + * mfns turned into pfns. Search the list for any unpinned pgds and pin + * them (unpinned pgds are not currently in use, probably because the + * process is under construction or destruction). + */ +void xen_mm_pin_all(void) +{ + unsigned long flags; + struct page *page; + + spin_lock_irqsave(&pgd_lock, flags); + + list_for_each_entry(page, &pgd_list, lru) { + if (!PagePinned(page)) { + xen_pgd_pin((pgd_t *)page_address(page)); + SetPageSavePinned(page); + } + } + + spin_unlock_irqrestore(&pgd_lock, flags); +} + /* The init_mm pagetable is really pinned as soon as its created, but that's before we have page structures to store the bits. So do all the book-keeping now. */ @@ -498,6 +713,29 @@ static void xen_pgd_unpin(pgd_t *pgd) xen_mc_issue(0); } +/* + * On resume, undo any pinning done at save, so that the rest of the + * kernel doesn't see any unexpected pinned pagetables. + */ +void xen_mm_unpin_all(void) +{ + unsigned long flags; + struct page *page; + + spin_lock_irqsave(&pgd_lock, flags); + + list_for_each_entry(page, &pgd_list, lru) { + if (PageSavePinned(page)) { + BUG_ON(!PagePinned(page)); + printk("unpinning pinned %p\n", page_address(page)); + xen_pgd_unpin((pgd_t *)page_address(page)); + ClearPageSavePinned(page); + } + } + + spin_unlock_irqrestore(&pgd_lock, flags); +} + void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next) { spin_lock(&next->page_table_lock); @@ -591,7 +829,7 @@ void xen_exit_mmap(struct mm_struct *mm) spin_lock(&mm->page_table_lock); /* pgd may not be pinned in the error exit path of execve */ - if (PagePinned(virt_to_page(mm->pgd))) + if (page_pinned(mm->pgd)) xen_pgd_unpin(mm->pgd); spin_unlock(&mm->page_table_lock); diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h index 5fe961c..297bf9f 100644 --- a/arch/x86/xen/mmu.h +++ b/arch/x86/xen/mmu.h @@ -25,10 +25,6 @@ enum pt_level { void set_pte_mfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags); -void xen_set_pte(pte_t *ptep, pte_t pteval); -void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pteval); -void xen_set_pmd(pmd_t *pmdp, pmd_t pmdval); void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next); void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm); @@ -45,11 +41,19 @@ pte_t xen_make_pte(pteval_t); pmd_t xen_make_pmd(pmdval_t); pgd_t xen_make_pgd(pgdval_t); +void xen_set_pte(pte_t *ptep, pte_t pteval); void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval); void xen_set_pte_atomic(pte_t *ptep, pte_t pte); +void xen_set_pmd(pmd_t *pmdp, pmd_t pmdval); void xen_set_pud(pud_t *ptr, pud_t val); +void xen_set_pmd_hyper(pmd_t *pmdp, pmd_t pmdval); +void xen_set_pud_hyper(pud_t *ptr, pud_t val); void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); void xen_pmd_clear(pmd_t *pmdp); +pte_t xen_ptep_modify_prot_start(struct mm_struct *mm, unsigned long addr, pte_t *ptep); +void xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte); + #endif /* _XEN_MMU_H */ diff --git a/arch/x86/xen/multicalls.c b/arch/x86/xen/multicalls.c index 5791eb2..3c63c4d 100644 --- a/arch/x86/xen/multicalls.c +++ b/arch/x86/xen/multicalls.c @@ -29,14 +29,14 @@ #define MC_DEBUG 1 #define MC_BATCH 32 -#define MC_ARGS (MC_BATCH * 16 / sizeof(u64)) +#define MC_ARGS (MC_BATCH * 16) struct mc_buffer { struct multicall_entry entries[MC_BATCH]; #if MC_DEBUG struct multicall_entry debug[MC_BATCH]; #endif - u64 args[MC_ARGS]; + unsigned char args[MC_ARGS]; struct callback { void (*fn)(void *); void *data; @@ -107,20 +107,48 @@ struct multicall_space __xen_mc_entry(size_t args) { struct mc_buffer *b = &__get_cpu_var(mc_buffer); struct multicall_space ret; - unsigned argspace = (args + sizeof(u64) - 1) / sizeof(u64); + unsigned argidx = roundup(b->argidx, sizeof(u64)); BUG_ON(preemptible()); - BUG_ON(argspace > MC_ARGS); + BUG_ON(b->argidx > MC_ARGS); if (b->mcidx == MC_BATCH || - (b->argidx + argspace) > MC_ARGS) + (argidx + args) > MC_ARGS) { xen_mc_flush(); + argidx = roundup(b->argidx, sizeof(u64)); + } ret.mc = &b->entries[b->mcidx]; b->mcidx++; + ret.args = &b->args[argidx]; + b->argidx = argidx + args; + + BUG_ON(b->argidx > MC_ARGS); + return ret; +} + +struct multicall_space xen_mc_extend_args(unsigned long op, size_t size) +{ + struct mc_buffer *b = &__get_cpu_var(mc_buffer); + struct multicall_space ret = { NULL, NULL }; + + BUG_ON(preemptible()); + BUG_ON(b->argidx > MC_ARGS); + + if (b->mcidx == 0) + return ret; + + if (b->entries[b->mcidx - 1].op != op) + return ret; + + if ((b->argidx + size) > MC_ARGS) + return ret; + + ret.mc = &b->entries[b->mcidx - 1]; ret.args = &b->args[b->argidx]; - b->argidx += argspace; + b->argidx += size; + BUG_ON(b->argidx > MC_ARGS); return ret; } diff --git a/arch/x86/xen/multicalls.h b/arch/x86/xen/multicalls.h index 8bae996..8589382 100644 --- a/arch/x86/xen/multicalls.h +++ b/arch/x86/xen/multicalls.h @@ -45,4 +45,16 @@ static inline void xen_mc_issue(unsigned mode) /* Set up a callback to be called when the current batch is flushed */ void xen_mc_callback(void (*fn)(void *), void *data); +/* + * Try to extend the arguments of the previous multicall command. The + * previous command's op must match. If it does, then it attempts to + * extend the argument space allocated to the multicall entry by + * arg_size bytes. + * + * The returned multicall_space will return with mc pointing to the + * command on success, or NULL on failure, and args pointing to the + * newly allocated space. + */ +struct multicall_space xen_mc_extend_args(unsigned long op, size_t arg_size); + #endif /* _XEN_MULTICALLS_H */ diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 82517e4..4884478 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -16,6 +16,7 @@ #include <asm/xen/hypervisor.h> #include <asm/xen/hypercall.h> +#include <xen/page.h> #include <xen/interface/callback.h> #include <xen/interface/physdev.h> #include <xen/features.h> @@ -27,8 +28,6 @@ extern const char xen_hypervisor_callback[]; extern const char xen_failsafe_callback[]; -unsigned long *phys_to_machine_mapping; -EXPORT_SYMBOL(phys_to_machine_mapping); /** * machine_specific_memory_setup - Hook for machine specific memory setup. @@ -38,6 +37,8 @@ char * __init xen_memory_setup(void) { unsigned long max_pfn = xen_start_info->nr_pages; + max_pfn = min(MAX_DOMAIN_PAGES, max_pfn); + e820.nr_map = 0; add_memory_region(0, LOWMEMSIZE(), E820_RAM); add_memory_region(HIGH_MEMORY, PFN_PHYS(max_pfn)-HIGH_MEMORY, E820_RAM); diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 94e6900..d2e3c20 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -35,7 +35,7 @@ #include "xen-ops.h" #include "mmu.h" -static cpumask_t xen_cpu_initialized_map; +cpumask_t xen_cpu_initialized_map; static DEFINE_PER_CPU(int, resched_irq) = -1; static DEFINE_PER_CPU(int, callfunc_irq) = -1; static DEFINE_PER_CPU(int, debug_irq) = -1; @@ -65,6 +65,12 @@ static struct call_data_struct *call_data; */ static irqreturn_t xen_reschedule_interrupt(int irq, void *dev_id) { +#ifdef CONFIG_X86_32 + __get_cpu_var(irq_stat).irq_resched_count++; +#else + add_pda(irq_resched_count, 1); +#endif + return IRQ_HANDLED; } diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c new file mode 100644 index 0000000..251669a --- /dev/null +++ b/arch/x86/xen/suspend.c @@ -0,0 +1,45 @@ +#include <linux/types.h> + +#include <xen/interface/xen.h> +#include <xen/grant_table.h> +#include <xen/events.h> + +#include <asm/xen/hypercall.h> +#include <asm/xen/page.h> + +#include "xen-ops.h" +#include "mmu.h" + +void xen_pre_suspend(void) +{ + xen_start_info->store_mfn = mfn_to_pfn(xen_start_info->store_mfn); + xen_start_info->console.domU.mfn = + mfn_to_pfn(xen_start_info->console.domU.mfn); + + BUG_ON(!irqs_disabled()); + + HYPERVISOR_shared_info = &xen_dummy_shared_info; + if (HYPERVISOR_update_va_mapping(fix_to_virt(FIX_PARAVIRT_BOOTMAP), + __pte_ma(0), 0)) + BUG(); +} + +void xen_post_suspend(int suspend_cancelled) +{ + xen_setup_shared_info(); + + if (suspend_cancelled) { + xen_start_info->store_mfn = + pfn_to_mfn(xen_start_info->store_mfn); + xen_start_info->console.domU.mfn = + pfn_to_mfn(xen_start_info->console.domU.mfn); + } else { +#ifdef CONFIG_SMP + xen_cpu_initialized_map = cpu_online_map; +#endif + xen_vcpu_restore(); + xen_timer_resume(); + } + +} + diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index 41e2175..64f0038 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -459,6 +459,19 @@ void xen_setup_cpu_clockevents(void) clockevents_register_device(&__get_cpu_var(xen_clock_events)); } +void xen_timer_resume(void) +{ + int cpu; + + if (xen_clockevent != &xen_vcpuop_clockevent) + return; + + for_each_online_cpu(cpu) { + if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL)) + BUG(); + } +} + __init void xen_time_init(void) { int cpu = smp_processor_id(); diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S index 6ec3b4f..7c0cf63 100644 --- a/arch/x86/xen/xen-head.S +++ b/arch/x86/xen/xen-head.S @@ -7,6 +7,7 @@ #include <linux/init.h> #include <asm/boot.h> #include <xen/interface/elfnote.h> +#include <asm/xen/interface.h> __INIT ENTRY(startup_xen) @@ -32,5 +33,9 @@ ENTRY(hypercall_page) ELFNOTE(Xen, XEN_ELFNOTE_FEATURES, .asciz "!writable_page_tables|pae_pgdir_above_4gb") ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "yes") ELFNOTE(Xen, XEN_ELFNOTE_LOADER, .asciz "generic") + ELFNOTE(Xen, XEN_ELFNOTE_L1_MFN_VALID, + .quad _PAGE_PRESENT; .quad _PAGE_PRESENT) + ELFNOTE(Xen, XEN_ELFNOTE_SUSPEND_CANCEL, .long 1) + ELFNOTE(Xen, XEN_ELFNOTE_HV_START_LOW, .long __HYPERVISOR_VIRT_START) #endif /*CONFIG_XEN */ diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index f1063ae..9a05559 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -9,18 +9,26 @@ extern const char xen_hypervisor_callback[]; extern const char xen_failsafe_callback[]; +struct trap_info; void xen_copy_trap_info(struct trap_info *traps); DECLARE_PER_CPU(unsigned long, xen_cr3); DECLARE_PER_CPU(unsigned long, xen_current_cr3); extern struct start_info *xen_start_info; +extern struct shared_info xen_dummy_shared_info; extern struct shared_info *HYPERVISOR_shared_info; +void xen_setup_mfn_list_list(void); +void xen_setup_shared_info(void); + char * __init xen_memory_setup(void); void __init xen_arch_setup(void); void __init xen_init_IRQ(void); void xen_enable_sysenter(void); +void xen_vcpu_restore(void); + +void __init xen_build_dynamic_phys_to_machine(void); void xen_setup_timer(int cpu); void xen_setup_cpu_clockevents(void); @@ -29,6 +37,7 @@ void __init xen_time_init(void); unsigned long xen_get_wallclock(void); int xen_set_wallclock(unsigned long time); unsigned long long xen_sched_clock(void); +void xen_timer_resume(void); irqreturn_t xen_debug_interrupt(int irq, void *dev_id); @@ -54,6 +63,8 @@ int xen_smp_call_function_single(int cpu, void (*func) (void *info), void *info, int xen_smp_call_function_mask(cpumask_t mask, void (*func)(void *), void *info, int wait); +extern cpumask_t xen_cpu_initialized_map; + /* Declare an asm function, along with symbols needed to make it inlineable */ diff --git a/drivers/base/power/trace.c b/drivers/base/power/trace.c index 2b4b392..87a7f1d 100644 --- a/drivers/base/power/trace.c +++ b/drivers/base/power/trace.c @@ -153,7 +153,7 @@ EXPORT_SYMBOL(set_trace_device); * it's not any guarantee, but it's a high _likelihood_ that * the match is valid). */ -void generate_resume_trace(void *tracedata, unsigned int user) +void generate_resume_trace(const void *tracedata, unsigned int user) { unsigned short lineno = *(unsigned short *)tracedata; const char *file = *(const char **)(tracedata + 2); diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 13665db..481ffe8 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -16,28 +16,9 @@ #include <asm/page.h> /* PAGE_SIZE */ #include <asm/e820.h> #include <asm/k8.h> +#include <asm/gart.h> #include "agp.h" -/* PTE bits. */ -#define GPTE_VALID 1 -#define GPTE_COHERENT 2 - -/* Aperture control register bits. */ -#define GARTEN (1<<0) -#define DISGARTCPU (1<<4) -#define DISGARTIO (1<<5) - -/* GART cache control register bits. */ -#define INVGART (1<<0) -#define GARTPTEERR (1<<1) - -/* K8 On-cpu GART registers */ -#define AMD64_GARTAPERTURECTL 0x90 -#define AMD64_GARTAPERTUREBASE 0x94 -#define AMD64_GARTTABLEBASE 0x98 -#define AMD64_GARTCACHECTL 0x9c -#define AMD64_GARTEN (1<<0) - /* NVIDIA K8 registers */ #define NVIDIA_X86_64_0_APBASE 0x10 #define NVIDIA_X86_64_1_APBASE1 0x50 @@ -165,29 +146,18 @@ static int amd64_fetch_size(void) * In a multiprocessor x86-64 system, this function gets * called once for each CPU. */ -static u64 amd64_configure (struct pci_dev *hammer, u64 gatt_table) +static u64 amd64_configure(struct pci_dev *hammer, u64 gatt_table) { u64 aperturebase; u32 tmp; - u64 addr, aper_base; + u64 aper_base; /* Address to map to */ - pci_read_config_dword (hammer, AMD64_GARTAPERTUREBASE, &tmp); + pci_read_config_dword(hammer, AMD64_GARTAPERTUREBASE, &tmp); aperturebase = tmp << 25; aper_base = (aperturebase & PCI_BASE_ADDRESS_MEM_MASK); - /* address of the mappings table */ - addr = (u64) gatt_table; - addr >>= 12; - tmp = (u32) addr<<4; - tmp &= ~0xf; - pci_write_config_dword (hammer, AMD64_GARTTABLEBASE, tmp); - - /* Enable GART translation for this hammer. */ - pci_read_config_dword(hammer, AMD64_GARTAPERTURECTL, &tmp); - tmp |= GARTEN; - tmp &= ~(DISGARTCPU | DISGARTIO); - pci_write_config_dword(hammer, AMD64_GARTAPERTURECTL, tmp); + enable_gart_translation(hammer, gatt_table); return aper_base; } @@ -226,9 +196,9 @@ static void amd64_cleanup(void) for (i = 0; i < num_k8_northbridges; i++) { struct pci_dev *dev = k8_northbridges[i]; /* disable gart translation */ - pci_read_config_dword (dev, AMD64_GARTAPERTURECTL, &tmp); + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &tmp); tmp &= ~AMD64_GARTEN; - pci_write_config_dword (dev, AMD64_GARTAPERTURECTL, tmp); + pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, tmp); } } @@ -258,24 +228,10 @@ static const struct agp_bridge_driver amd_8151_driver = { }; /* Some basic sanity checks for the aperture. */ -static int __devinit aperture_valid(u64 aper, u32 size) +static int __devinit agp_aperture_valid(u64 aper, u32 size) { - if (aper == 0) { - printk(KERN_ERR PFX "No aperture\n"); - return 0; - } - if (size < 32*1024*1024) { - printk(KERN_ERR PFX "Aperture too small (%d MB)\n", size>>20); - return 0; - } - if ((u64)aper + size > 0x100000000ULL) { - printk(KERN_ERR PFX "Aperture out of bounds\n"); + if (!aperture_valid(aper, size, 32*1024*1024)) return 0; - } - if (e820_any_mapped(aper, aper + size, E820_RAM)) { - printk(KERN_ERR PFX "Aperture pointing to RAM\n"); - return 0; - } /* Request the Aperture. This catches cases when someone else already put a mapping in there - happens with some very broken BIOS @@ -308,11 +264,11 @@ static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp, u32 nb_order, nb_base; u16 apsize; - pci_read_config_dword(nb, 0x90, &nb_order); + pci_read_config_dword(nb, AMD64_GARTAPERTURECTL, &nb_order); nb_order = (nb_order >> 1) & 7; - pci_read_config_dword(nb, 0x94, &nb_base); + pci_read_config_dword(nb, AMD64_GARTAPERTUREBASE, &nb_base); nb_aper = nb_base << 25; - if (aperture_valid(nb_aper, (32*1024*1024)<<nb_order)) { + if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order)) { return 0; } @@ -331,12 +287,23 @@ static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp, pci_read_config_dword(agp, 0x10, &aper_low); pci_read_config_dword(agp, 0x14, &aper_hi); aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32); + + /* + * On some sick chips APSIZE is 0. This means it wants 4G + * so let double check that order, and lets trust the AMD NB settings + */ + if (order >=0 && aper + (32ULL<<(20 + order)) > 0x100000000ULL) { + printk(KERN_INFO "Aperture size %u MB is not right, using settings from NB\n", + 32 << order); + order = nb_order; + } + printk(KERN_INFO PFX "Aperture from AGP @ %Lx size %u MB\n", aper, 32 << order); - if (order < 0 || !aperture_valid(aper, (32*1024*1024)<<order)) + if (order < 0 || !agp_aperture_valid(aper, (32*1024*1024)<<order)) return -1; - pci_write_config_dword(nb, 0x90, order << 1); - pci_write_config_dword(nb, 0x94, aper >> 25); + pci_write_config_dword(nb, AMD64_GARTAPERTURECTL, order << 1); + pci_write_config_dword(nb, AMD64_GARTAPERTUREBASE, aper >> 25); return 0; } diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c index dd68f85..db2ae42 100644 --- a/drivers/char/hvc_xen.c +++ b/drivers/char/hvc_xen.c @@ -39,9 +39,14 @@ static int xencons_irq; /* ------------------------------------------------------------------ */ +static unsigned long console_pfn = ~0ul; + static inline struct xencons_interface *xencons_interface(void) { - return mfn_to_virt(xen_start_info->console.domU.mfn); + if (console_pfn == ~0ul) + return mfn_to_virt(xen_start_info->console.domU.mfn); + else + return __va(console_pfn << PAGE_SHIFT); } static inline void notify_daemon(void) @@ -101,20 +106,32 @@ static int __init xen_init(void) { struct hvc_struct *hp; - if (!is_running_on_xen()) - return 0; + if (!is_running_on_xen() || + is_initial_xendomain() || + !xen_start_info->console.domU.evtchn) + return -ENODEV; xencons_irq = bind_evtchn_to_irq(xen_start_info->console.domU.evtchn); if (xencons_irq < 0) - xencons_irq = 0 /* NO_IRQ */; + xencons_irq = 0; /* NO_IRQ */ + hp = hvc_alloc(HVC_COOKIE, xencons_irq, &hvc_ops, 256); if (IS_ERR(hp)) return PTR_ERR(hp); hvc = hp; + + console_pfn = mfn_to_pfn(xen_start_info->console.domU.mfn); + return 0; } +void xen_console_resume(void) +{ + if (xencons_irq) + rebind_evtchn_irq(xen_start_info->console.domU.evtchn, xencons_irq); +} + static void __exit xen_fini(void) { if (hvc) @@ -134,12 +151,28 @@ module_init(xen_init); module_exit(xen_fini); console_initcall(xen_cons_init); +static void raw_console_write(const char *str, int len) +{ + while(len > 0) { + int rc = HYPERVISOR_console_io(CONSOLEIO_write, len, (char *)str); + if (rc <= 0) + break; + + str += rc; + len -= rc; + } +} + +#ifdef CONFIG_EARLY_PRINTK static void xenboot_write_console(struct console *console, const char *string, unsigned len) { unsigned int linelen, off = 0; const char *pos; + raw_console_write(string, len); + + write_console(0, "(early) ", 8); while (off < len && NULL != (pos = strchr(string+off, '\n'))) { linelen = pos-string+off; if (off + linelen > len) @@ -155,5 +188,23 @@ static void xenboot_write_console(struct console *console, const char *string, struct console xenboot_console = { .name = "xenboot", .write = xenboot_write_console, - .flags = CON_PRINTBUFFER | CON_BOOT, + .flags = CON_PRINTBUFFER | CON_BOOT | CON_ANYTIME, }; +#endif /* CONFIG_EARLY_PRINTK */ + +void xen_raw_console_write(const char *str) +{ + raw_console_write(str, strlen(str)); +} + +void xen_raw_printk(const char *fmt, ...) +{ + static char buf[512]; + va_list ap; + + va_start(ap, fmt); + vsnprintf(buf, sizeof(buf), fmt, ap); + va_end(ap); + + xen_raw_console_write(buf); +} diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c index 0f47f46..9ce3b3b 100644 --- a/drivers/input/xen-kbdfront.c +++ b/drivers/input/xen-kbdfront.c @@ -66,6 +66,9 @@ static irqreturn_t input_handler(int rq, void *dev_id) case XENKBD_TYPE_MOTION: input_report_rel(dev, REL_X, event->motion.rel_x); input_report_rel(dev, REL_Y, event->motion.rel_y); + if (event->motion.rel_z) + input_report_rel(dev, REL_WHEEL, + -event->motion.rel_z); break; case XENKBD_TYPE_KEY: dev = NULL; @@ -84,6 +87,9 @@ static irqreturn_t input_handler(int rq, void *dev_id) case XENKBD_TYPE_POS: input_report_abs(dev, ABS_X, event->pos.abs_x); input_report_abs(dev, ABS_Y, event->pos.abs_y); + if (event->pos.rel_z) + input_report_rel(dev, REL_WHEEL, + -event->pos.rel_z); break; } if (dev) @@ -152,7 +158,7 @@ static int __devinit xenkbd_probe(struct xenbus_device *dev, ptr->evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_ABS); for (i = BTN_LEFT; i <= BTN_TASK; i++) set_bit(i, ptr->keybit); - ptr->relbit[0] = BIT(REL_X) | BIT(REL_Y); + ptr->relbit[0] = BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL); input_set_abs_params(ptr, ABS_X, 0, XENFB_WIDTH, 0, 0); input_set_abs_params(ptr, ABS_Y, 0, XENFB_HEIGHT, 0, 0); @@ -294,6 +300,16 @@ InitWait: */ if (dev->state != XenbusStateConnected) goto InitWait; /* no InitWait seen yet, fudge it */ + + /* Set input abs params to match backend screen res */ + if (xenbus_scanf(XBT_NIL, info->xbdev->otherend, + "width", "%d", &val) > 0) + input_set_abs_params(info->ptr, ABS_X, 0, val, 0, 0); + + if (xenbus_scanf(XBT_NIL, info->xbdev->otherend, + "height", "%d", &val) > 0) + input_set_abs_params(info->ptr, ABS_Y, 0, val, 0, 0); + break; case XenbusStateClosing: @@ -337,4 +353,6 @@ static void __exit xenkbd_cleanup(void) module_init(xenkbd_init); module_exit(xenkbd_cleanup); +MODULE_DESCRIPTION("Xen virtual keyboard/pointer device frontend"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("xen:vkbd"); diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h index 005bd04..5faefea 100644 --- a/drivers/lguest/lg.h +++ b/drivers/lguest/lg.h @@ -136,7 +136,6 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user); * first step in the migration to the kernel types. pte_pfn is already defined * in the kernel. */ #define pgd_flags(x) (pgd_val(x) & ~PAGE_MASK) -#define pte_flags(x) (pte_val(x) & ~PAGE_MASK) #define pgd_pfn(x) (pgd_val(x) >> PAGE_SHIFT) /* interrupts_and_traps.c: */ diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c index 619a6f8..47ed39b 100644 --- a/drivers/video/xen-fbfront.c +++ b/drivers/video/xen-fbfront.c @@ -18,6 +18,7 @@ * frame buffer. */ +#include <linux/console.h> #include <linux/kernel.h> #include <linux/errno.h> #include <linux/fb.h> @@ -42,37 +43,68 @@ struct xenfb_info { struct xenfb_page *page; unsigned long *mfns; int update_wanted; /* XENFB_TYPE_UPDATE wanted */ + int feature_resize; /* XENFB_TYPE_RESIZE ok */ + struct xenfb_resize resize; /* protected by resize_lock */ + int resize_dpy; /* ditto */ + spinlock_t resize_lock; struct xenbus_device *xbdev; }; -static u32 xenfb_mem_len = XENFB_WIDTH * XENFB_HEIGHT * XENFB_DEPTH / 8; +#define XENFB_DEFAULT_FB_LEN (XENFB_WIDTH * XENFB_HEIGHT * XENFB_DEPTH / 8) +enum { KPARAM_MEM, KPARAM_WIDTH, KPARAM_HEIGHT, KPARAM_CNT }; +static int video[KPARAM_CNT] = { 2, XENFB_WIDTH, XENFB_HEIGHT }; +module_param_array(video, int, NULL, 0); +MODULE_PARM_DESC(video, + "Video memory size in MB, width, height in pixels (default 2,800,600)"); + +static void xenfb_make_preferred_console(void); static int xenfb_remove(struct xenbus_device *); -static void xenfb_init_shared_page(struct xenfb_info *); +static void xenfb_init_shared_page(struct xenfb_info *, struct fb_info *); static int xenfb_connect_backend(struct xenbus_device *, struct xenfb_info *); static void xenfb_disconnect_backend(struct xenfb_info *); +static void xenfb_send_event(struct xenfb_info *info, + union xenfb_out_event *event) +{ + u32 prod; + + prod = info->page->out_prod; + /* caller ensures !xenfb_queue_full() */ + mb(); /* ensure ring space available */ + XENFB_OUT_RING_REF(info->page, prod) = *event; + wmb(); /* ensure ring contents visible */ + info->page->out_prod = prod + 1; + + notify_remote_via_irq(info->irq); +} + static void xenfb_do_update(struct xenfb_info *info, int x, int y, int w, int h) { union xenfb_out_event event; - u32 prod; + memset(&event, 0, sizeof(event)); event.type = XENFB_TYPE_UPDATE; event.update.x = x; event.update.y = y; event.update.width = w; event.update.height = h; - prod = info->page->out_prod; /* caller ensures !xenfb_queue_full() */ - mb(); /* ensure ring space available */ - XENFB_OUT_RING_REF(info->page, prod) = event; - wmb(); /* ensure ring contents visible */ - info->page->out_prod = prod + 1; + xenfb_send_event(info, &event); +} - notify_remote_via_irq(info->irq); +static void xenfb_do_resize(struct xenfb_info *info) +{ + union xenfb_out_event event; + + memset(&event, 0, sizeof(event)); + event.resize = info->resize; + + /* caller ensures !xenfb_queue_full() */ + xenfb_send_event(info, &event); } static int xenfb_queue_full(struct xenfb_info *info) @@ -84,12 +116,28 @@ static int xenfb_queue_full(struct xenfb_info *info) return prod - cons == XENFB_OUT_RING_LEN; } +static void xenfb_handle_resize_dpy(struct xenfb_info *info) +{ + unsigned long flags; + + spin_lock_irqsave(&info->resize_lock, flags); + if (info->resize_dpy) { + if (!xenfb_queue_full(info)) { + info->resize_dpy = 0; + xenfb_do_resize(info); + } + } + spin_unlock_irqrestore(&info->resize_lock, flags); +} + static void xenfb_refresh(struct xenfb_info *info, int x1, int y1, int w, int h) { unsigned long flags; - int y2 = y1 + h - 1; int x2 = x1 + w - 1; + int y2 = y1 + h - 1; + + xenfb_handle_resize_dpy(info); if (!info->update_wanted) return; @@ -222,6 +270,57 @@ static ssize_t xenfb_write(struct fb_info *p, const char __user *buf, return res; } +static int +xenfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + struct xenfb_info *xenfb_info; + int required_mem_len; + + xenfb_info = info->par; + + if (!xenfb_info->feature_resize) { + if (var->xres == video[KPARAM_WIDTH] && + var->yres == video[KPARAM_HEIGHT] && + var->bits_per_pixel == xenfb_info->page->depth) { + return 0; + } + return -EINVAL; + } + + /* Can't resize past initial width and height */ + if (var->xres > video[KPARAM_WIDTH] || var->yres > video[KPARAM_HEIGHT]) + return -EINVAL; + + required_mem_len = var->xres * var->yres * xenfb_info->page->depth / 8; + if (var->bits_per_pixel == xenfb_info->page->depth && + var->xres <= info->fix.line_length / (XENFB_DEPTH / 8) && + required_mem_len <= info->fix.smem_len) { + var->xres_virtual = var->xres; + var->yres_virtual = var->yres; + return 0; + } + return -EINVAL; +} + +static int xenfb_set_par(struct fb_info *info) +{ + struct xenfb_info *xenfb_info; + unsigned long flags; + + xenfb_info = info->par; + + spin_lock_irqsave(&xenfb_info->resize_lock, flags); + xenfb_info->resize.type = XENFB_TYPE_RESIZE; + xenfb_info->resize.width = info->var.xres; + xenfb_info->resize.height = info->var.yres; + xenfb_info->resize.stride = info->fix.line_length; + xenfb_info->resize.depth = info->var.bits_per_pixel; + xenfb_info->resize.offset = 0; + xenfb_info->resize_dpy = 1; + spin_unlock_irqrestore(&xenfb_info->resize_lock, flags); + return 0; +} + static struct fb_ops xenfb_fb_ops = { .owner = THIS_MODULE, .fb_read = fb_sys_read, @@ -230,6 +329,8 @@ static struct fb_ops xenfb_fb_ops = { .fb_fillrect = xenfb_fillrect, .fb_copyarea = xenfb_copyarea, .fb_imageblit = xenfb_imageblit, + .fb_check_var = xenfb_check_var, + .fb_set_par = xenfb_set_par, }; static irqreturn_t xenfb_event_handler(int rq, void *dev_id) @@ -258,6 +359,8 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, { struct xenfb_info *info; struct fb_info *fb_info; + int fb_size; + int val; int ret; info = kzalloc(sizeof(*info), GFP_KERNEL); @@ -265,18 +368,35 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, xenbus_dev_fatal(dev, -ENOMEM, "allocating info structure"); return -ENOMEM; } + + /* Limit kernel param videoram amount to what is in xenstore */ + if (xenbus_scanf(XBT_NIL, dev->otherend, "videoram", "%d", &val) == 1) { + if (val < video[KPARAM_MEM]) + video[KPARAM_MEM] = val; + } + + /* If requested res does not fit in available memory, use default */ + fb_size = video[KPARAM_MEM] * 1024 * 1024; + if (video[KPARAM_WIDTH] * video[KPARAM_HEIGHT] * XENFB_DEPTH / 8 + > fb_size) { + video[KPARAM_WIDTH] = XENFB_WIDTH; + video[KPARAM_HEIGHT] = XENFB_HEIGHT; + fb_size = XENFB_DEFAULT_FB_LEN; + } + dev->dev.driver_data = info; info->xbdev = dev; info->irq = -1; info->x1 = info->y1 = INT_MAX; spin_lock_init(&info->dirty_lock); + spin_lock_init(&info->resize_lock); - info->fb = vmalloc(xenfb_mem_len); + info->fb = vmalloc(fb_size); if (info->fb == NULL) goto error_nomem; - memset(info->fb, 0, xenfb_mem_len); + memset(info->fb, 0, fb_size); - info->nr_pages = (xenfb_mem_len + PAGE_SIZE - 1) >> PAGE_SHIFT; + info->nr_pages = (fb_size + PAGE_SIZE - 1) >> PAGE_SHIFT; info->mfns = vmalloc(sizeof(unsigned long) * info->nr_pages); if (!info->mfns) @@ -287,8 +407,6 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, if (!info->page) goto error_nomem; - xenfb_init_shared_page(info); - /* abusing framebuffer_alloc() to allocate pseudo_palette */ fb_info = framebuffer_alloc(sizeof(u32) * 256, NULL); if (fb_info == NULL) @@ -301,9 +419,9 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, fb_info->screen_base = info->fb; fb_info->fbops = &xenfb_fb_ops; - fb_info->var.xres_virtual = fb_info->var.xres = info->page->width; - fb_info->var.yres_virtual = fb_info->var.yres = info->page->height; - fb_info->var.bits_per_pixel = info->page->depth; + fb_info->var.xres_virtual = fb_info->var.xres = video[KPARAM_WIDTH]; + fb_info->var.yres_virtual = fb_info->var.yres = video[KPARAM_HEIGHT]; + fb_info->var.bits_per_pixel = XENFB_DEPTH; fb_info->var.red = (struct fb_bitfield){16, 8, 0}; fb_info->var.green = (struct fb_bitfield){8, 8, 0}; @@ -315,9 +433,9 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, fb_info->var.vmode = FB_VMODE_NONINTERLACED; fb_info->fix.visual = FB_VISUAL_TRUECOLOR; - fb_info->fix.line_length = info->page->line_length; + fb_info->fix.line_length = fb_info->var.xres * XENFB_DEPTH / 8; fb_info->fix.smem_start = 0; - fb_info->fix.smem_len = xenfb_mem_len; + fb_info->fix.smem_len = fb_size; strcpy(fb_info->fix.id, "xen"); fb_info->fix.type = FB_TYPE_PACKED_PIXELS; fb_info->fix.accel = FB_ACCEL_NONE; @@ -334,6 +452,8 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, fb_info->fbdefio = &xenfb_defio; fb_deferred_io_init(fb_info); + xenfb_init_shared_page(info, fb_info); + ret = register_framebuffer(fb_info); if (ret) { fb_deferred_io_cleanup(fb_info); @@ -348,6 +468,7 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, if (ret < 0) goto error; + xenfb_make_preferred_console(); return 0; error_nomem: @@ -358,12 +479,34 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, return ret; } +static __devinit void +xenfb_make_preferred_console(void) +{ + struct console *c; + + if (console_set_on_cmdline) + return; + + acquire_console_sem(); + for (c = console_drivers; c; c = c->next) { + if (!strcmp(c->name, "tty") && c->index == 0) + break; + } + release_console_sem(); + if (c) { + unregister_console(c); + c->flags |= CON_CONSDEV; + c->flags &= ~CON_PRINTBUFFER; /* don't print again */ + register_console(c); + } +} + static int xenfb_resume(struct xenbus_device *dev) { struct xenfb_info *info = dev->dev.driver_data; xenfb_disconnect_backend(info); - xenfb_init_shared_page(info); + xenfb_init_shared_page(info, info->fb_info); return xenfb_connect_backend(dev, info); } @@ -391,20 +534,23 @@ static unsigned long vmalloc_to_mfn(void *address) return pfn_to_mfn(vmalloc_to_pfn(address)); } -static void xenfb_init_shared_page(struct xenfb_info *info) +static void xenfb_init_shared_page(struct xenfb_info *info, + struct fb_info *fb_info) { int i; + int epd = PAGE_SIZE / sizeof(info->mfns[0]); for (i = 0; i < info->nr_pages; i++) info->mfns[i] = vmalloc_to_mfn(info->fb + i * PAGE_SIZE); - info->page->pd[0] = vmalloc_to_mfn(info->mfns); - info->page->pd[1] = 0; - info->page->width = XENFB_WIDTH; - info->page->height = XENFB_HEIGHT; - info->page->depth = XENFB_DEPTH; - info->page->line_length = (info->page->depth / 8) * info->page->width; - info->page->mem_length = xenfb_mem_len; + for (i = 0; i * epd < info->nr_pages; i++) + info->page->pd[i] = vmalloc_to_mfn(&info->mfns[i * epd]); + + info->page->width = fb_info->var.xres; + info->page->height = fb_info->var.yres; + info->page->depth = fb_info->var.bits_per_pixel; + info->page->line_length = fb_info->fix.line_length; + info->page->mem_length = fb_info->fix.smem_len; info->page->in_cons = info->page->in_prod = 0; info->page->out_cons = info->page->out_prod = 0; } @@ -504,6 +650,11 @@ InitWait: val = 0; if (val) info->update_wanted = 1; + + if (xenbus_scanf(XBT_NIL, dev->otherend, + "feature-resize", "%d", &val) < 0) + val = 0; + info->feature_resize = val; break; case XenbusStateClosing: @@ -547,4 +698,6 @@ static void __exit xenfb_cleanup(void) module_init(xenfb_init); module_exit(xenfb_cleanup); +MODULE_DESCRIPTION("Xen virtual framebuffer device frontend"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("xen:vfb"); diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile index 37af04f..363286c 100644 --- a/drivers/xen/Makefile +++ b/drivers/xen/Makefile @@ -1,4 +1,4 @@ -obj-y += grant-table.o features.o events.o +obj-y += grant-table.o features.o events.o manage.o obj-y += xenbus/ obj-$(CONFIG_XEN_XENCOMM) += xencomm.o obj-$(CONFIG_XEN_BALLOON) += balloon.o diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index ab25ba6..591bc29 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -225,7 +225,7 @@ static int increase_reservation(unsigned long nr_pages) page = balloon_next_page(page); } - reservation.extent_start = (unsigned long)frame_list; + set_xen_guest_handle(reservation.extent_start, frame_list); reservation.nr_extents = nr_pages; rc = HYPERVISOR_memory_op( XENMEM_populate_physmap, &reservation); @@ -321,7 +321,7 @@ static int decrease_reservation(unsigned long nr_pages) balloon_append(pfn_to_page(pfn)); } - reservation.extent_start = (unsigned long)frame_list; + set_xen_guest_handle(reservation.extent_start, frame_list); reservation.nr_extents = nr_pages; ret = HYPERVISOR_memory_op(XENMEM_decrease_reservation, &reservation); BUG_ON(ret != nr_pages); @@ -368,7 +368,7 @@ static void balloon_process(struct work_struct *work) } /* Resets the Xen limit, sets new target, and kicks off processing. */ -void balloon_set_new_target(unsigned long target) +static void balloon_set_new_target(unsigned long target) { /* No need for lock. Not read-modify-write updates. */ balloon_stats.hard_limit = ~0UL; @@ -483,7 +483,7 @@ static int dealloc_pte_fn( .extent_order = 0, .domid = DOMID_SELF }; - reservation.extent_start = (unsigned long)&mfn; + set_xen_guest_handle(reservation.extent_start, &mfn); set_pte_at(&init_mm, addr, pte, __pte_ma(0ull)); set_phys_to_machine(__pa(addr) >> PAGE_SHIFT, INVALID_P2M_ENTRY); ret = HYPERVISOR_memory_op(XENMEM_decrease_reservation, &reservation); @@ -519,7 +519,7 @@ static struct page **alloc_empty_pages_and_pagevec(int nr_pages) .extent_order = 0, .domid = DOMID_SELF }; - reservation.extent_start = (unsigned long)&gmfn; + set_xen_guest_handle(reservation.extent_start, &gmfn); ret = HYPERVISOR_memory_op(XENMEM_decrease_reservation, &reservation); if (ret == 1) diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 76e5b73..332dd637 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -355,7 +355,7 @@ static void unbind_from_irq(unsigned int irq) spin_lock(&irq_mapping_update_lock); - if (VALID_EVTCHN(evtchn) && (--irq_bindcount[irq] == 0)) { + if ((--irq_bindcount[irq] == 0) && VALID_EVTCHN(evtchn)) { close.port = evtchn; if (HYPERVISOR_event_channel_op(EVTCHNOP_close, &close) != 0) BUG(); @@ -375,7 +375,7 @@ static void unbind_from_irq(unsigned int irq) evtchn_to_irq[evtchn] = -1; irq_info[irq] = IRQ_UNBOUND; - dynamic_irq_init(irq); + dynamic_irq_cleanup(irq); } spin_unlock(&irq_mapping_update_lock); @@ -557,6 +557,33 @@ out: put_cpu(); } +/* Rebind a new event channel to an existing irq. */ +void rebind_evtchn_irq(int evtchn, int irq) +{ + /* Make sure the irq is masked, since the new event channel + will also be masked. */ + disable_irq(irq); + + spin_lock(&irq_mapping_update_lock); + + /* After resume the irq<->evtchn mappings are all cleared out */ + BUG_ON(evtchn_to_irq[evtchn] != -1); + /* Expect irq to have been bound before, + so the bindcount should be non-0 */ + BUG_ON(irq_bindcount[irq] == 0); + + evtchn_to_irq[evtchn] = irq; + irq_info[irq] = mk_irq_info(IRQT_EVTCHN, 0, evtchn); + + spin_unlock(&irq_mapping_update_lock); + + /* new event channels are always bound to cpu 0 */ + irq_set_affinity(irq, cpumask_of_cpu(0)); + + /* Unmask the event channel. */ + enable_irq(irq); +} + /* Rebind an evtchn so that it gets delivered to a specific cpu */ static void rebind_irq_to_cpu(unsigned irq, unsigned tcpu) { @@ -647,6 +674,89 @@ static int retrigger_dynirq(unsigned int irq) return ret; } +static void restore_cpu_virqs(unsigned int cpu) +{ + struct evtchn_bind_virq bind_virq; + int virq, irq, evtchn; + + for (virq = 0; virq < NR_VIRQS; virq++) { + if ((irq = per_cpu(virq_to_irq, cpu)[virq]) == -1) + continue; + + BUG_ON(irq_info[irq].type != IRQT_VIRQ); + BUG_ON(irq_info[irq].index != virq); + + /* Get a new binding from Xen. */ + bind_virq.virq = virq; + bind_virq.vcpu = cpu; + if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_virq, + &bind_virq) != 0) + BUG(); + evtchn = bind_virq.port; + + /* Record the new mapping. */ + evtchn_to_irq[evtchn] = irq; + irq_info[irq] = mk_irq_info(IRQT_VIRQ, virq, evtchn); + bind_evtchn_to_cpu(evtchn, cpu); + + /* Ready for use. */ + unmask_evtchn(evtchn); + } +} + +static void restore_cpu_ipis(unsigned int cpu) +{ + struct evtchn_bind_ipi bind_ipi; + int ipi, irq, evtchn; + + for (ipi = 0; ipi < XEN_NR_IPIS; ipi++) { + if ((irq = per_cpu(ipi_to_irq, cpu)[ipi]) == -1) + continue; + + BUG_ON(irq_info[irq].type != IRQT_IPI); + BUG_ON(irq_info[irq].index != ipi); + + /* Get a new binding from Xen. */ + bind_ipi.vcpu = cpu; + if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_ipi, + &bind_ipi) != 0) + BUG(); + evtchn = bind_ipi.port; + + /* Record the new mapping. */ + evtchn_to_irq[evtchn] = irq; + irq_info[irq] = mk_irq_info(IRQT_IPI, ipi, evtchn); + bind_evtchn_to_cpu(evtchn, cpu); + + /* Ready for use. */ + unmask_evtchn(evtchn); + + } +} + +void xen_irq_resume(void) +{ + unsigned int cpu, irq, evtchn; + + init_evtchn_cpu_bindings(); + + /* New event-channel space is not 'live' yet. */ + for (evtchn = 0; evtchn < NR_EVENT_CHANNELS; evtchn++) + mask_evtchn(evtchn); + + /* No IRQ <-> event-channel mappings. */ + for (irq = 0; irq < NR_IRQS; irq++) + irq_info[irq].evtchn = 0; /* zap event-channel binding */ + + for (evtchn = 0; evtchn < NR_EVENT_CHANNELS; evtchn++) + evtchn_to_irq[evtchn] = -1; + + for_each_possible_cpu(cpu) { + restore_cpu_virqs(cpu); + restore_cpu_ipis(cpu); + } +} + static struct irq_chip xen_dynamic_chip __read_mostly = { .name = "xen-dyn", .mask = disable_dynirq, diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index 52b6b41..e9e1116 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -471,14 +471,14 @@ static int gnttab_map(unsigned int start_idx, unsigned int end_idx) return 0; } -static int gnttab_resume(void) +int gnttab_resume(void) { if (max_nr_grant_frames() < nr_grant_frames) return -ENOSYS; return gnttab_map(0, nr_grant_frames - 1); } -static int gnttab_suspend(void) +int gnttab_suspend(void) { arch_gnttab_unmap_shared(shared, nr_grant_frames); return 0; diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c new file mode 100644 index 0000000..5b546e3 --- /dev/null +++ b/drivers/xen/manage.c @@ -0,0 +1,252 @@ +/* + * Handle extern requests for shutdown, reboot and sysrq + */ +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/reboot.h> +#include <linux/sysrq.h> +#include <linux/stop_machine.h> +#include <linux/freezer.h> + +#include <xen/xenbus.h> +#include <xen/grant_table.h> +#include <xen/events.h> +#include <xen/hvc-console.h> +#include <xen/xen-ops.h> + +#include <asm/xen/hypercall.h> +#include <asm/xen/page.h> + +enum shutdown_state { + SHUTDOWN_INVALID = -1, + SHUTDOWN_POWEROFF = 0, + SHUTDOWN_SUSPEND = 2, + /* Code 3 is SHUTDOWN_CRASH, which we don't use because the domain can only + report a crash, not be instructed to crash! + HALT is the same as POWEROFF, as far as we're concerned. The tools use + the distinction when we return the reason code to them. */ + SHUTDOWN_HALT = 4, +}; + +/* Ignore multiple shutdown requests. */ +static enum shutdown_state shutting_down = SHUTDOWN_INVALID; + +#ifdef CONFIG_PM_SLEEP +static int xen_suspend(void *data) +{ + int *cancelled = data; + int err; + + BUG_ON(!irqs_disabled()); + + load_cr3(swapper_pg_dir); + + err = device_power_down(PMSG_SUSPEND); + if (err) { + printk(KERN_ERR "xen_suspend: device_power_down failed: %d\n", + err); + return err; + } + + xen_mm_pin_all(); + gnttab_suspend(); + xen_pre_suspend(); + + /* + * This hypercall returns 1 if suspend was cancelled + * or the domain was merely checkpointed, and 0 if it + * is resuming in a new domain. + */ + *cancelled = HYPERVISOR_suspend(virt_to_mfn(xen_start_info)); + + xen_post_suspend(*cancelled); + gnttab_resume(); + xen_mm_unpin_all(); + + device_power_up(); + + if (!*cancelled) { + xen_irq_resume(); + xen_console_resume(); + } + + return 0; +} + +static void do_suspend(void) +{ + int err; + int cancelled = 1; + + shutting_down = SHUTDOWN_SUSPEND; + +#ifdef CONFIG_PREEMPT + /* If the kernel is preemptible, we need to freeze all the processes + to prevent them from being in the middle of a pagetable update + during suspend. */ + err = freeze_processes(); + if (err) { + printk(KERN_ERR "xen suspend: freeze failed %d\n", err); + return; + } +#endif + + err = device_suspend(PMSG_SUSPEND); + if (err) { + printk(KERN_ERR "xen suspend: device_suspend %d\n", err); + goto out; + } + + printk("suspending xenbus...\n"); + /* XXX use normal device tree? */ + xenbus_suspend(); + + err = stop_machine_run(xen_suspend, &cancelled, 0); + if (err) { + printk(KERN_ERR "failed to start xen_suspend: %d\n", err); + goto out; + } + + if (!cancelled) + xenbus_resume(); + else + xenbus_suspend_cancel(); + + device_resume(); + + /* Make sure timer events get retriggered on all CPUs */ + clock_was_set(); +out: +#ifdef CONFIG_PREEMPT + thaw_processes(); +#endif + shutting_down = SHUTDOWN_INVALID; +} +#endif /* CONFIG_PM_SLEEP */ + +static void shutdown_handler(struct xenbus_watch *watch, + const char **vec, unsigned int len) +{ + char *str; + struct xenbus_transaction xbt; + int err; + + if (shutting_down != SHUTDOWN_INVALID) + return; + + again: + err = xenbus_transaction_start(&xbt); + if (err) + return; + + str = (char *)xenbus_read(xbt, "control", "shutdown", NULL); + /* Ignore read errors and empty reads. */ + if (XENBUS_IS_ERR_READ(str)) { + xenbus_transaction_end(xbt, 1); + return; + } + + xenbus_write(xbt, "control", "shutdown", ""); + + err = xenbus_transaction_end(xbt, 0); + if (err == -EAGAIN) { + kfree(str); + goto again; + } + + if (strcmp(str, "poweroff") == 0 || + strcmp(str, "halt") == 0) { + shutting_down = SHUTDOWN_POWEROFF; + orderly_poweroff(false); + } else if (strcmp(str, "reboot") == 0) { + shutting_down = SHUTDOWN_POWEROFF; /* ? */ + ctrl_alt_del(); +#ifdef CONFIG_PM_SLEEP + } else if (strcmp(str, "suspend") == 0) { + do_suspend(); +#endif + } else { + printk(KERN_INFO "Ignoring shutdown request: %s\n", str); + shutting_down = SHUTDOWN_INVALID; + } + + kfree(str); +} + +static void sysrq_handler(struct xenbus_watch *watch, const char **vec, + unsigned int len) +{ + char sysrq_key = '\0'; + struct xenbus_transaction xbt; + int err; + + again: + err = xenbus_transaction_start(&xbt); + if (err) + return; + if (!xenbus_scanf(xbt, "control", "sysrq", "%c", &sysrq_key)) { + printk(KERN_ERR "Unable to read sysrq code in " + "control/sysrq\n"); + xenbus_transaction_end(xbt, 1); + return; + } + + if (sysrq_key != '\0') + xenbus_printf(xbt, "control", "sysrq", "%c", '\0'); + + err = xenbus_transaction_end(xbt, 0); + if (err == -EAGAIN) + goto again; + + if (sysrq_key != '\0') + handle_sysrq(sysrq_key, NULL); +} + +static struct xenbus_watch shutdown_watch = { + .node = "control/shutdown", + .callback = shutdown_handler +}; + +static struct xenbus_watch sysrq_watch = { + .node = "control/sysrq", + .callback = sysrq_handler +}; + +static int setup_shutdown_watcher(void) +{ + int err; + + err = register_xenbus_watch(&shutdown_watch); + if (err) { + printk(KERN_ERR "Failed to set shutdown watcher\n"); + return err; + } + + err = register_xenbus_watch(&sysrq_watch); + if (err) { + printk(KERN_ERR "Failed to set sysrq watcher\n"); + return err; + } + + return 0; +} + +static int shutdown_event(struct notifier_block *notifier, + unsigned long event, + void *data) +{ + setup_shutdown_watcher(); + return NOTIFY_DONE; +} + +static int __init setup_shutdown_event(void) +{ + static struct notifier_block xenstore_notifier = { + .notifier_call = shutdown_event + }; + register_xenstore_notifier(&xenstore_notifier); + + return 0; +} + +subsys_initcall(setup_shutdown_event); diff --git a/drivers/xen/xenbus/xenbus_comms.c b/drivers/xen/xenbus/xenbus_comms.c index 6efbe3f..090c61e 100644 --- a/drivers/xen/xenbus/xenbus_comms.c +++ b/drivers/xen/xenbus/xenbus_comms.c @@ -203,7 +203,6 @@ int xb_read(void *data, unsigned len) int xb_init_comms(void) { struct xenstore_domain_interface *intf = xen_store_interface; - int err; if (intf->req_prod != intf->req_cons) printk(KERN_ERR "XENBUS request ring is not quiescent " @@ -216,18 +215,20 @@ int xb_init_comms(void) intf->rsp_cons = intf->rsp_prod; } - if (xenbus_irq) - unbind_from_irqhandler(xenbus_irq, &xb_waitq); + if (xenbus_irq) { + /* Already have an irq; assume we're resuming */ + rebind_evtchn_irq(xen_store_evtchn, xenbus_irq); + } else { + int err; + err = bind_evtchn_to_irqhandler(xen_store_evtchn, wake_waiting, + 0, "xenbus", &xb_waitq); + if (err <= 0) { + printk(KERN_ERR "XENBUS request irq failed %i\n", err); + return err; + } - err = bind_evtchn_to_irqhandler( - xen_store_evtchn, wake_waiting, - 0, "xenbus", &xb_waitq); - if (err <= 0) { - printk(KERN_ERR "XENBUS request irq failed %i\n", err); - return err; + xenbus_irq = err; } - xenbus_irq = err; - return 0; } diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c index 15f7bd4..c652d46 100644 --- a/fs/proc/proc_misc.c +++ b/fs/proc/proc_misc.c @@ -479,6 +479,13 @@ static const struct file_operations proc_vmalloc_operations = { }; #endif +#ifndef arch_irq_stat_cpu +#define arch_irq_stat_cpu(cpu) 0 +#endif +#ifndef arch_irq_stat +#define arch_irq_stat() 0 +#endif + static int show_stat(struct seq_file *p, void *v) { int i; @@ -516,7 +523,9 @@ static int show_stat(struct seq_file *p, void *v) sum += temp; per_irq_sum[j] += temp; } + sum += arch_irq_stat_cpu(i); } + sum += arch_irq_stat(); seq_printf(p, "cpu %llu %llu %llu %llu %llu %llu %llu %llu %llu\n", (unsigned long long)cputime64_to_clock_t(user), diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h index 44ef329..4fce3db 100644 --- a/include/asm-generic/pgtable.h +++ b/include/asm-generic/pgtable.h @@ -197,6 +197,63 @@ static inline int pmd_none_or_clear_bad(pmd_t *pmd) } #endif /* CONFIG_MMU */ +static inline pte_t __ptep_modify_prot_start(struct mm_struct *mm, + unsigned long addr, + pte_t *ptep) +{ + /* + * Get the current pte state, but zero it out to make it + * non-present, preventing the hardware from asynchronously + * updating it. + */ + return ptep_get_and_clear(mm, addr, ptep); +} + +static inline void __ptep_modify_prot_commit(struct mm_struct *mm, + unsigned long addr, + pte_t *ptep, pte_t pte) +{ + /* + * The pte is non-present, so there's no hardware state to + * preserve. + */ + set_pte_at(mm, addr, ptep, pte); +} + +#ifndef __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION +/* + * Start a pte protection read-modify-write transaction, which + * protects against asynchronous hardware modifications to the pte. + * The intention is not to prevent the hardware from making pte + * updates, but to prevent any updates it may make from being lost. + * + * This does not protect against other software modifications of the + * pte; the appropriate pte lock must be held over the transation. + * + * Note that this interface is intended to be batchable, meaning that + * ptep_modify_prot_commit may not actually update the pte, but merely + * queue the update to be done at some later time. The update must be + * actually committed before the pte lock is released, however. + */ +static inline pte_t ptep_modify_prot_start(struct mm_struct *mm, + unsigned long addr, + pte_t *ptep) +{ + return __ptep_modify_prot_start(mm, addr, ptep); +} + +/* + * Commit an update to a pte, leaving any hardware-controlled bits in + * the PTE unmodified. + */ +static inline void ptep_modify_prot_commit(struct mm_struct *mm, + unsigned long addr, + pte_t *ptep, pte_t pte) +{ + __ptep_modify_prot_commit(mm, addr, ptep, pte); +} +#endif /* __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION */ + /* * A facility to provide lazy MMU batching. This allows PTE updates and * page invalidations to be delayed until a call to leave lazy MMU mode diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index f054778..f1992dc 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -93,6 +93,8 @@ VMLINUX_SYMBOL(__end_rio_route_ops) = .; \ } \ \ + TRACEDATA \ + \ /* Kernel symbol table: Normal symbols */ \ __ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start___ksymtab) = .; \ @@ -318,6 +320,18 @@ __stop___bug_table = .; \ } +#ifdef CONFIG_PM_TRACE +#define TRACEDATA \ + . = ALIGN(4); \ + .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { \ + __tracedata_start = .; \ + *(.tracedata) \ + __tracedata_end = .; \ + } +#else +#define TRACEDATA +#endif + #define NOTES \ .notes : AT(ADDR(.notes) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start_notes) = .; \ diff --git a/include/asm-x86/apic.h b/include/asm-x86/apic.h index be9639a..313bcaf 100644 --- a/include/asm-x86/apic.h +++ b/include/asm-x86/apic.h @@ -36,14 +36,10 @@ extern void generic_apic_probe(void); #ifdef CONFIG_X86_LOCAL_APIC extern int apic_verbosity; -extern int timer_over_8254; extern int local_apic_timer_c2_ok; -extern int local_apic_timer_disabled; -extern int apic_runs_main_timer; extern int ioapic_force; extern int disable_apic; -extern int disable_apic_timer; /* * Basic functions accessing APICs. diff --git a/include/asm-x86/asm.h b/include/asm-x86/asm.h index 90dec0c..7093982 100644 --- a/include/asm-x86/asm.h +++ b/include/asm-x86/asm.h @@ -1,33 +1,29 @@ #ifndef _ASM_X86_ASM_H #define _ASM_X86_ASM_H -#ifdef CONFIG_X86_32 -/* 32 bits */ - -# define _ASM_PTR " .long " -# define _ASM_ALIGN " .balign 4 " -# define _ASM_MOV_UL " movl " - -# define _ASM_INC " incl " -# define _ASM_DEC " decl " -# define _ASM_ADD " addl " -# define _ASM_SUB " subl " -# define _ASM_XADD " xaddl " +#ifdef __ASSEMBLY__ +# define __ASM_FORM(x) x +#else +# define __ASM_FORM(x) " " #x " " +#endif +#ifdef CONFIG_X86_32 +# define __ASM_SEL(a,b) __ASM_FORM(a) #else -/* 64 bits */ +# define __ASM_SEL(a,b) __ASM_FORM(b) +#endif -# define _ASM_PTR " .quad " -# define _ASM_ALIGN " .balign 8 " -# define _ASM_MOV_UL " movq " +#define __ASM_SIZE(inst) __ASM_SEL(inst##l, inst##q) -# define _ASM_INC " incq " -# define _ASM_DEC " decq " -# define _ASM_ADD " addq " -# define _ASM_SUB " subq " -# define _ASM_XADD " xaddq " +#define _ASM_PTR __ASM_SEL(.long, .quad) +#define _ASM_ALIGN __ASM_SEL(.balign 4, .balign 8) +#define _ASM_MOV_UL __ASM_SIZE(mov) -#endif /* CONFIG_X86_32 */ +#define _ASM_INC __ASM_SIZE(inc) +#define _ASM_DEC __ASM_SIZE(dec) +#define _ASM_ADD __ASM_SIZE(add) +#define _ASM_SUB __ASM_SIZE(sub) +#define _ASM_XADD __ASM_SIZE(xadd) /* Exception table entry */ # define _ASM_EXTABLE(from,to) \ diff --git a/include/asm-x86/atomic_64.h b/include/asm-x86/atomic_64.h index 3e0cd7d..fe589c1 100644 --- a/include/asm-x86/atomic_64.h +++ b/include/asm-x86/atomic_64.h @@ -11,12 +11,6 @@ * resource counting etc.. */ -#ifdef CONFIG_SMP -#define LOCK "lock ; " -#else -#define LOCK "" -#endif - /* * Make sure gcc doesn't try to be clever and move things around * on us. We need to use _exactly_ the address the user gave us, diff --git a/include/asm-x86/bitops.h b/include/asm-x86/bitops.h index ee4b3ea..96b1829 100644 --- a/include/asm-x86/bitops.h +++ b/include/asm-x86/bitops.h @@ -23,11 +23,21 @@ #if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 1) /* Technically wrong, but this avoids compilation errors on some gcc versions. */ -#define ADDR "=m" (*(volatile long *) addr) +#define BITOP_ADDR(x) "=m" (*(volatile long *) (x)) #else -#define ADDR "+m" (*(volatile long *) addr) +#define BITOP_ADDR(x) "+m" (*(volatile long *) (x)) #endif +#define ADDR BITOP_ADDR(addr) + +/* + * We do the locked ops that don't return the old value as + * a mask operation on a byte. + */ +#define IS_IMMEDIATE(nr) (__builtin_constant_p(nr)) +#define CONST_MASK_ADDR(nr, addr) BITOP_ADDR((void *)(addr) + ((nr)>>3)) +#define CONST_MASK(nr) (1 << ((nr) & 7)) + /** * set_bit - Atomically set a bit in memory * @nr: the bit to set @@ -43,9 +53,17 @@ * Note that @nr may be almost arbitrarily large; this function is not * restricted to acting on a single-word quantity. */ -static inline void set_bit(int nr, volatile void *addr) +static inline void set_bit(unsigned int nr, volatile unsigned long *addr) { - asm volatile(LOCK_PREFIX "bts %1,%0" : ADDR : "Ir" (nr) : "memory"); + if (IS_IMMEDIATE(nr)) { + asm volatile(LOCK_PREFIX "orb %1,%0" + : CONST_MASK_ADDR(nr, addr) + : "iq" ((u8)CONST_MASK(nr)) + : "memory"); + } else { + asm volatile(LOCK_PREFIX "bts %1,%0" + : BITOP_ADDR(addr) : "Ir" (nr) : "memory"); + } } /** @@ -57,7 +75,7 @@ static inline void set_bit(int nr, volatile void *addr) * If it's called on the same region of memory simultaneously, the effect * may be that only one operation succeeds. */ -static inline void __set_bit(int nr, volatile void *addr) +static inline void __set_bit(int nr, volatile unsigned long *addr) { asm volatile("bts %1,%0" : ADDR : "Ir" (nr) : "memory"); } @@ -72,9 +90,17 @@ static inline void __set_bit(int nr, volatile void *addr) * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() * in order to ensure changes are visible on other processors. */ -static inline void clear_bit(int nr, volatile void *addr) +static inline void clear_bit(int nr, volatile unsigned long *addr) { - asm volatile(LOCK_PREFIX "btr %1,%0" : ADDR : "Ir" (nr)); + if (IS_IMMEDIATE(nr)) { + asm volatile(LOCK_PREFIX "andb %1,%0" + : CONST_MASK_ADDR(nr, addr) + : "iq" ((u8)~CONST_MASK(nr))); + } else { + asm volatile(LOCK_PREFIX "btr %1,%0" + : BITOP_ADDR(addr) + : "Ir" (nr)); + } } /* @@ -85,13 +111,13 @@ static inline void clear_bit(int nr, volatile void *addr) * clear_bit() is atomic and implies release semantics before the memory * operation. It can be used for an unlock. */ -static inline void clear_bit_unlock(unsigned nr, volatile void *addr) +static inline void clear_bit_unlock(unsigned nr, volatile unsigned long *addr) { barrier(); clear_bit(nr, addr); } -static inline void __clear_bit(int nr, volatile void *addr) +static inline void __clear_bit(int nr, volatile unsigned long *addr) { asm volatile("btr %1,%0" : ADDR : "Ir" (nr)); } @@ -108,7 +134,7 @@ static inline void __clear_bit(int nr, volatile void *addr) * No memory barrier is required here, because x86 cannot reorder stores past * older loads. Same principle as spin_unlock. */ -static inline void __clear_bit_unlock(unsigned nr, volatile void *addr) +static inline void __clear_bit_unlock(unsigned nr, volatile unsigned long *addr) { barrier(); __clear_bit(nr, addr); @@ -126,7 +152,7 @@ static inline void __clear_bit_unlock(unsigned nr, volatile void *addr) * If it's called on the same region of memory simultaneously, the effect * may be that only one operation succeeds. */ -static inline void __change_bit(int nr, volatile void *addr) +static inline void __change_bit(int nr, volatile unsigned long *addr) { asm volatile("btc %1,%0" : ADDR : "Ir" (nr)); } @@ -140,7 +166,7 @@ static inline void __change_bit(int nr, volatile void *addr) * Note that @nr may be almost arbitrarily large; this function is not * restricted to acting on a single-word quantity. */ -static inline void change_bit(int nr, volatile void *addr) +static inline void change_bit(int nr, volatile unsigned long *addr) { asm volatile(LOCK_PREFIX "btc %1,%0" : ADDR : "Ir" (nr)); } @@ -153,7 +179,7 @@ static inline void change_bit(int nr, volatile void *addr) * This operation is atomic and cannot be reordered. * It also implies a memory barrier. */ -static inline int test_and_set_bit(int nr, volatile void *addr) +static inline int test_and_set_bit(int nr, volatile unsigned long *addr) { int oldbit; @@ -170,7 +196,7 @@ static inline int test_and_set_bit(int nr, volatile void *addr) * * This is the same as test_and_set_bit on x86. */ -static inline int test_and_set_bit_lock(int nr, volatile void *addr) +static inline int test_and_set_bit_lock(int nr, volatile unsigned long *addr) { return test_and_set_bit(nr, addr); } @@ -184,7 +210,7 @@ static inline int test_and_set_bit_lock(int nr, volatile void *addr) * If two examples of this operation race, one can appear to succeed * but actually fail. You must protect multiple accesses with a lock. */ -static inline int __test_and_set_bit(int nr, volatile void *addr) +static inline int __test_and_set_bit(int nr, volatile unsigned long *addr) { int oldbit; @@ -203,7 +229,7 @@ static inline int __test_and_set_bit(int nr, volatile void *addr) * This operation is atomic and cannot be reordered. * It also implies a memory barrier. */ -static inline int test_and_clear_bit(int nr, volatile void *addr) +static inline int test_and_clear_bit(int nr, volatile unsigned long *addr) { int oldbit; @@ -223,7 +249,7 @@ static inline int test_and_clear_bit(int nr, volatile void *addr) * If two examples of this operation race, one can appear to succeed * but actually fail. You must protect multiple accesses with a lock. */ -static inline int __test_and_clear_bit(int nr, volatile void *addr) +static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr) { int oldbit; @@ -235,7 +261,7 @@ static inline int __test_and_clear_bit(int nr, volatile void *addr) } /* WARNING: non atomic and it can be reordered! */ -static inline int __test_and_change_bit(int nr, volatile void *addr) +static inline int __test_and_change_bit(int nr, volatile unsigned long *addr) { int oldbit; @@ -255,7 +281,7 @@ static inline int __test_and_change_bit(int nr, volatile void *addr) * This operation is atomic and cannot be reordered. * It also implies a memory barrier. */ -static inline int test_and_change_bit(int nr, volatile void *addr) +static inline int test_and_change_bit(int nr, volatile unsigned long *addr) { int oldbit; @@ -266,13 +292,13 @@ static inline int test_and_change_bit(int nr, volatile void *addr) return oldbit; } -static inline int constant_test_bit(int nr, const volatile void *addr) +static inline int constant_test_bit(int nr, const volatile unsigned long *addr) { return ((1UL << (nr % BITS_PER_LONG)) & (((unsigned long *)addr)[nr / BITS_PER_LONG])) != 0; } -static inline int variable_test_bit(int nr, volatile const void *addr) +static inline int variable_test_bit(int nr, volatile const unsigned long *addr) { int oldbit; diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h index 0d609c8..78b47e7 100644 --- a/include/asm-x86/cpufeature.h +++ b/include/asm-x86/cpufeature.h @@ -142,11 +142,11 @@ extern const char * const x86_power_flags[32]; #define clear_cpu_cap(c, bit) clear_bit(bit, (unsigned long *)((c)->x86_capability)) #define setup_clear_cpu_cap(bit) do { \ clear_cpu_cap(&boot_cpu_data, bit); \ - set_bit(bit, cleared_cpu_caps); \ + set_bit(bit, (unsigned long *)cleared_cpu_caps); \ } while (0) #define setup_force_cpu_cap(bit) do { \ set_cpu_cap(&boot_cpu_data, bit); \ - clear_bit(bit, cleared_cpu_caps); \ + clear_bit(bit, (unsigned long *)cleared_cpu_caps); \ } while (0) #define cpu_has_fpu boot_cpu_has(X86_FEATURE_FPU) diff --git a/include/asm-x86/current.h b/include/asm-x86/current.h index d2526d3..7515c19 100644 --- a/include/asm-x86/current.h +++ b/include/asm-x86/current.h @@ -1,5 +1,39 @@ +#ifndef _X86_CURRENT_H +#define _X86_CURRENT_H + #ifdef CONFIG_X86_32 -# include "current_32.h" -#else -# include "current_64.h" -#endif +#include <linux/compiler.h> +#include <asm/percpu.h> + +struct task_struct; + +DECLARE_PER_CPU(struct task_struct *, current_task); +static __always_inline struct task_struct *get_current(void) +{ + return x86_read_percpu(current_task); +} + +#else /* X86_32 */ + +#ifndef __ASSEMBLY__ +#include <asm/pda.h> + +struct task_struct; + +static __always_inline struct task_struct *get_current(void) +{ + return read_pda(pcurrent); +} + +#else /* __ASSEMBLY__ */ + +#include <asm/asm-offsets.h> +#define GET_CURRENT(reg) movq %gs:(pda_pcurrent),reg + +#endif /* __ASSEMBLY__ */ + +#endif /* X86_32 */ + +#define current get_current() + +#endif /* X86_CURRENT_H */ diff --git a/include/asm-x86/current_32.h b/include/asm-x86/current_32.h deleted file mode 100644 index 5af9bdb..0000000 --- a/include/asm-x86/current_32.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef _I386_CURRENT_H -#define _I386_CURRENT_H - -#include <linux/compiler.h> -#include <asm/percpu.h> - -struct task_struct; - -DECLARE_PER_CPU(struct task_struct *, current_task); -static __always_inline struct task_struct *get_current(void) -{ - return x86_read_percpu(current_task); -} - -#define current get_current() - -#endif /* !(_I386_CURRENT_H) */ diff --git a/include/asm-x86/current_64.h b/include/asm-x86/current_64.h deleted file mode 100644 index 2d368ed..0000000 --- a/include/asm-x86/current_64.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _X86_64_CURRENT_H -#define _X86_64_CURRENT_H - -#if !defined(__ASSEMBLY__) -struct task_struct; - -#include <asm/pda.h> - -static inline struct task_struct *get_current(void) -{ - struct task_struct *t = read_pda(pcurrent); - return t; -} - -#define current get_current() - -#else - -#ifndef ASM_OFFSET_H -#include <asm/asm-offsets.h> -#endif - -#define GET_CURRENT(reg) movq %gs:(pda_pcurrent),reg - -#endif - -#endif /* !(_X86_64_CURRENT_H) */ diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index 7004251..5103d0b 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -24,6 +24,7 @@ struct e820map { #define ISA_START_ADDRESS 0xa0000 #define ISA_END_ADDRESS 0x100000 +#define is_ISA_range(s, e) ((s) >= ISA_START_ADDRESS && (e) < ISA_END_ADDRESS) #define BIOS_BEGIN 0x000a0000 #define BIOS_END 0x00100000 diff --git a/include/asm-x86/fixmap_32.h b/include/asm-x86/fixmap_32.h index 4b96148..f0df7ee 100644 --- a/include/asm-x86/fixmap_32.h +++ b/include/asm-x86/fixmap_32.h @@ -79,10 +79,6 @@ enum fixed_addresses { FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, #endif -#ifdef CONFIG_ACPI - FIX_ACPI_BEGIN, - FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1, -#endif #ifdef CONFIG_PCI_MMCONFIG FIX_PCIE_MCFG, #endif @@ -103,6 +99,10 @@ enum fixed_addresses { (__end_of_permanent_fixed_addresses & 511), FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_NESTING - 1, FIX_WP_TEST, +#ifdef CONFIG_ACPI + FIX_ACPI_BEGIN, + FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1, +#endif #ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT FIX_OHCI1394_BASE, #endif diff --git a/include/asm-x86/gart.h b/include/asm-x86/gart.h index 90958ed..eeca2f5 100644 --- a/include/asm-x86/gart.h +++ b/include/asm-x86/gart.h @@ -1,16 +1,20 @@ #ifndef _ASM_X8664_IOMMU_H #define _ASM_X8664_IOMMU_H 1 +#include <asm/e820.h> + extern void pci_iommu_shutdown(void); extern void no_iommu_init(void); extern int force_iommu, no_iommu; extern int iommu_detected; +extern int agp_amd64_init(void); #ifdef CONFIG_GART_IOMMU extern void gart_iommu_init(void); extern void gart_iommu_shutdown(void); extern void __init gart_parse_options(char *); extern void early_gart_iommu_check(void); extern void gart_iommu_hole_init(void); +extern void set_up_gart_resume(u32, u32); extern int fallback_aper_order; extern int fallback_aper_force; extern int gart_iommu_aperture; @@ -31,4 +35,63 @@ static inline void gart_iommu_shutdown(void) #endif +/* PTE bits. */ +#define GPTE_VALID 1 +#define GPTE_COHERENT 2 + +/* Aperture control register bits. */ +#define GARTEN (1<<0) +#define DISGARTCPU (1<<4) +#define DISGARTIO (1<<5) + +/* GART cache control register bits. */ +#define INVGART (1<<0) +#define GARTPTEERR (1<<1) + +/* K8 On-cpu GART registers */ +#define AMD64_GARTAPERTURECTL 0x90 +#define AMD64_GARTAPERTUREBASE 0x94 +#define AMD64_GARTTABLEBASE 0x98 +#define AMD64_GARTCACHECTL 0x9c +#define AMD64_GARTEN (1<<0) + +static inline void enable_gart_translation(struct pci_dev *dev, u64 addr) +{ + u32 tmp, ctl; + + /* address of the mappings table */ + addr >>= 12; + tmp = (u32) addr<<4; + tmp &= ~0xf; + pci_write_config_dword(dev, AMD64_GARTTABLEBASE, tmp); + + /* Enable GART translation for this hammer. */ + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); + ctl |= GARTEN; + ctl &= ~(DISGARTCPU | DISGARTIO); + pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); +} + +static inline int aperture_valid(u64 aper_base, u32 aper_size, u32 min_size) +{ + if (!aper_base) + return 0; + + if (aper_base + aper_size > 0x100000000ULL) { + printk(KERN_ERR "Aperture beyond 4GB. Ignoring.\n"); + return 0; + } + if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) { + printk(KERN_ERR "Aperture pointing to e820 RAM. Ignoring.\n"); + return 0; + } + if (aper_size < min_size) { + printk(KERN_ERR "Aperture too small (%d MB) than (%d MB)\n", + aper_size>>20, min_size>>20); + return 0; + } + + return 1; +} + #endif diff --git a/include/asm-x86/hardirq.h b/include/asm-x86/hardirq.h index 314434d..000787d 100644 --- a/include/asm-x86/hardirq.h +++ b/include/asm-x86/hardirq.h @@ -3,3 +3,9 @@ #else # include "hardirq_64.h" #endif + +extern u64 arch_irq_stat_cpu(unsigned int cpu); +#define arch_irq_stat_cpu arch_irq_stat_cpu + +extern u64 arch_irq_stat(void); +#define arch_irq_stat arch_irq_stat diff --git a/include/asm-x86/i8259.h b/include/asm-x86/i8259.h index 45d4df3..2f98df9 100644 --- a/include/asm-x86/i8259.h +++ b/include/asm-x86/i8259.h @@ -55,4 +55,6 @@ static inline void outb_pic(unsigned char value, unsigned int port) udelay(2); } +extern struct irq_chip i8259A_chip; + #endif /* __ASM_I8259_H__ */ diff --git a/include/asm-x86/io_apic.h b/include/asm-x86/io_apic.h index d593e14..dc0f55f 100644 --- a/include/asm-x86/io_apic.h +++ b/include/asm-x86/io_apic.h @@ -11,6 +11,15 @@ * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar */ +/* I/O Unit Redirection Table */ +#define IO_APIC_REDIR_VECTOR_MASK 0x000FF +#define IO_APIC_REDIR_DEST_LOGICAL 0x00800 +#define IO_APIC_REDIR_DEST_PHYSICAL 0x00000 +#define IO_APIC_REDIR_SEND_PENDING (1 << 12) +#define IO_APIC_REDIR_REMOTE_IRR (1 << 14) +#define IO_APIC_REDIR_LEVEL_TRIGGER (1 << 15) +#define IO_APIC_REDIR_MASKED (1 << 16) + /* * The structure of the IO-APIC: */ @@ -137,6 +146,9 @@ extern int sis_apic_bug; /* 1 if "noapic" boot option passed */ extern int skip_ioapic_setup; +/* 1 if the timer IRQ uses the '8259A Virtual Wire' mode */ +extern int timer_through_8259; + static inline void disable_ioapic_setup(void) { skip_ioapic_setup = 1; @@ -162,6 +174,7 @@ extern void ioapic_init_mappings(void); #else /* !CONFIG_X86_IO_APIC */ #define io_apic_assign_pci_irqs 0 +static const int timer_through_8259 = 0; #endif #endif diff --git a/include/asm-x86/mach-default/smpboot_hooks.h b/include/asm-x86/mach-default/smpboot_hooks.h index 56d0e1f..b63c521 100644 --- a/include/asm-x86/mach-default/smpboot_hooks.h +++ b/include/asm-x86/mach-default/smpboot_hooks.h @@ -41,8 +41,10 @@ static inline void __init smpboot_setup_io_apic(void) */ if (!skip_ioapic_setup && nr_ioapics) setup_IO_APIC(); - else + else { nr_ioapics = 0; + localise_nmi_watchdog(); + } } static inline void smpboot_clear_io_apic(void) diff --git a/include/asm-x86/mmconfig.h b/include/asm-x86/mmconfig.h new file mode 100644 index 0000000..95beda0 --- /dev/null +++ b/include/asm-x86/mmconfig.h @@ -0,0 +1,12 @@ +#ifndef _ASM_MMCONFIG_H +#define _ASM_MMCONFIG_H + +#ifdef CONFIG_PCI_MMCONFIG +extern void __cpuinit fam10h_check_enable_mmcfg(void); +extern void __init check_enable_amd_mmconf_dmi(void); +#else +static inline void fam10h_check_enable_mmcfg(void) { } +static inline void check_enable_amd_mmconf_dmi(void) { } +#endif + +#endif diff --git a/include/asm-x86/msr-index.h b/include/asm-x86/msr-index.h index 09413ad..44bce77 100644 --- a/include/asm-x86/msr-index.h +++ b/include/asm-x86/msr-index.h @@ -111,7 +111,9 @@ #define MSR_K8_TOP_MEM2 0xc001001d #define MSR_K8_SYSCFG 0xc0010010 #define MSR_K8_HWCR 0xc0010015 -#define MSR_K8_ENABLE_C1E 0xc0010055 +#define MSR_K8_INT_PENDING_MSG 0xc0010055 +/* C1E active bits in int pending message */ +#define K8_INTP_C1E_ACTIVE_MASK 0x18000000 #define MSR_K8_TSEG_ADDR 0xc0010112 #define K8_MTRRFIXRANGE_DRAM_ENABLE 0x00040000 /* MtrrFixDramEn bit */ #define K8_MTRRFIXRANGE_DRAM_MODIFY 0x00080000 /* MtrrFixDramModEn bit */ diff --git a/include/asm-x86/nmi.h b/include/asm-x86/nmi.h index 1e36302..05449ef 100644 --- a/include/asm-x86/nmi.h +++ b/include/asm-x86/nmi.h @@ -15,27 +15,6 @@ */ int do_nmi_callback(struct pt_regs *regs, int cpu); -#ifdef CONFIG_PM - -/** Replace the PM callback routine for NMI. */ -struct pm_dev *set_nmi_pm_callback(pm_callback callback); - -/** Unset the PM callback routine back to the default. */ -void unset_nmi_pm_callback(struct pm_dev *dev); - -#else - -static inline struct pm_dev *set_nmi_pm_callback(pm_callback callback) -{ - return 0; -} - -static inline void unset_nmi_pm_callback(struct pm_dev *dev) -{ -} - -#endif /* CONFIG_PM */ - #ifdef CONFIG_X86_64 extern void default_do_nmi(struct pt_regs *); extern void die_nmi(char *str, struct pt_regs *regs, int do_panic); @@ -46,7 +25,6 @@ extern void nmi_watchdog_default(void); extern int check_nmi_watchdog(void); extern int nmi_watchdog_enabled; -extern int unknown_nmi_panic; extern int avail_to_resrv_perfctr_nmi_bit(unsigned int); extern int avail_to_resrv_perfctr_nmi(unsigned int); extern int reserve_perfctr_nmi(unsigned int); @@ -78,6 +56,11 @@ extern int unknown_nmi_panic; void __trigger_all_cpu_backtrace(void); #define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace() +static inline void localise_nmi_watchdog(void) +{ + if (nmi_watchdog == NMI_IO_APIC) + nmi_watchdog = NMI_LOCAL_APIC; +} #endif void lapic_watchdog_stop(void); diff --git a/include/asm-x86/page.h b/include/asm-x86/page.h index dc936dd..b52ed85 100644 --- a/include/asm-x86/page.h +++ b/include/asm-x86/page.h @@ -51,8 +51,15 @@ #ifndef __ASSEMBLY__ +typedef struct { pgdval_t pgd; } pgd_t; +typedef struct { pgprotval_t pgprot; } pgprot_t; + extern int page_is_ram(unsigned long pagenr); extern int devmem_is_allowed(unsigned long pagenr); +extern void map_devmem(unsigned long pfn, unsigned long size, + pgprot_t vma_prot); +extern void unmap_devmem(unsigned long pfn, unsigned long size, + pgprot_t vma_prot); extern unsigned long max_pfn_mapped; @@ -74,9 +81,6 @@ static inline void copy_user_page(void *to, void *from, unsigned long vaddr, alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr) #define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE -typedef struct { pgdval_t pgd; } pgd_t; -typedef struct { pgprotval_t pgprot; } pgprot_t; - static inline pgd_t native_make_pgd(pgdval_t val) { return (pgd_t) { val }; @@ -160,6 +164,7 @@ static inline pteval_t native_pte_val(pte_t pte) #endif #define pte_val(x) native_pte_val(x) +#define pte_flags(x) native_pte_val(x) #define __pte(x) native_make_pte(x) #endif /* CONFIG_PARAVIRT */ diff --git a/include/asm-x86/page_32.h b/include/asm-x86/page_32.h index ccf0ba3..73ed2e4 100644 --- a/include/asm-x86/page_32.h +++ b/include/asm-x86/page_32.h @@ -13,6 +13,14 @@ */ #define __PAGE_OFFSET _AC(CONFIG_PAGE_OFFSET, UL) +#ifdef CONFIG_4KSTACKS +#define THREAD_ORDER 0 +#else +#define THREAD_ORDER 1 +#endif +#define THREAD_SIZE (PAGE_SIZE << THREAD_ORDER) + + #ifdef CONFIG_X86_PAE /* 44=32+12, the limit we can fit into an unsigned long pfn */ #define __PHYSICAL_MASK_SHIFT 44 diff --git a/include/asm-x86/paravirt.h b/include/asm-x86/paravirt.h index 0f13b94..e9ada31 100644 --- a/include/asm-x86/paravirt.h +++ b/include/asm-x86/paravirt.h @@ -238,7 +238,13 @@ struct pv_mmu_ops { void (*pte_update_defer)(struct mm_struct *mm, unsigned long addr, pte_t *ptep); + pte_t (*ptep_modify_prot_start)(struct mm_struct *mm, unsigned long addr, + pte_t *ptep); + void (*ptep_modify_prot_commit)(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte); + pteval_t (*pte_val)(pte_t); + pteval_t (*pte_flags)(pte_t); pte_t (*make_pte)(pteval_t pte); pgdval_t (*pgd_val)(pgd_t); @@ -996,6 +1002,20 @@ static inline pteval_t pte_val(pte_t pte) return ret; } +static inline pteval_t pte_flags(pte_t pte) +{ + pteval_t ret; + + if (sizeof(pteval_t) > sizeof(long)) + ret = PVOP_CALL2(pteval_t, pv_mmu_ops.pte_flags, + pte.pte, (u64)pte.pte >> 32); + else + ret = PVOP_CALL1(pteval_t, pv_mmu_ops.pte_flags, + pte.pte); + + return ret; +} + static inline pgd_t __pgd(pgdval_t val) { pgdval_t ret; @@ -1024,6 +1044,29 @@ static inline pgdval_t pgd_val(pgd_t pgd) return ret; } +#define __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION +static inline pte_t ptep_modify_prot_start(struct mm_struct *mm, unsigned long addr, + pte_t *ptep) +{ + pteval_t ret; + + ret = PVOP_CALL3(pteval_t, pv_mmu_ops.ptep_modify_prot_start, + mm, addr, ptep); + + return (pte_t) { .pte = ret }; +} + +static inline void ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte) +{ + if (sizeof(pteval_t) > sizeof(long)) + /* 5 arg words */ + pv_mmu_ops.ptep_modify_prot_commit(mm, addr, ptep, pte); + else + PVOP_VCALL4(pv_mmu_ops.ptep_modify_prot_commit, + mm, addr, ptep, pte.pte); +} + static inline void set_pte(pte_t *ptep, pte_t pte) { if (sizeof(pteval_t) > sizeof(long)) diff --git a/include/asm-x86/pat.h b/include/asm-x86/pat.h index 88f60cc..7edc473 100644 --- a/include/asm-x86/pat.h +++ b/include/asm-x86/pat.h @@ -1,14 +1,13 @@ - #ifndef _ASM_PAT_H -#define _ASM_PAT_H 1 +#define _ASM_PAT_H #include <linux/types.h> #ifdef CONFIG_X86_PAT -extern int pat_wc_enabled; +extern int pat_enabled; extern void validate_pat_support(struct cpuinfo_x86 *c); #else -static const int pat_wc_enabled = 0; +static const int pat_enabled; static inline void validate_pat_support(struct cpuinfo_x86 *c) { } #endif @@ -21,4 +20,3 @@ extern int free_memtype(u64 start, u64 end); extern void pat_disable(char *reason); #endif - diff --git a/include/asm-x86/pci.h b/include/asm-x86/pci.h index 30bbde0..2db14cf 100644 --- a/include/asm-x86/pci.h +++ b/include/asm-x86/pci.h @@ -18,6 +18,8 @@ struct pci_sysdata { #endif }; +extern int pci_routeirq; + /* scan a bus after allocating a pci_sysdata for it */ extern struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node); diff --git a/include/asm-x86/pci_32.h b/include/asm-x86/pci_32.h index 8c4c3a0..a50d468 100644 --- a/include/asm-x86/pci_32.h +++ b/include/asm-x86/pci_32.h @@ -18,12 +18,14 @@ struct pci_dev; #define PCI_DMA_BUS_IS_PHYS (1) /* pci_unmap_{page,single} is a nop so... */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) -#define pci_unmap_addr(PTR, ADDR_NAME) (0) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) -#define pci_unmap_len(PTR, LEN_NAME) (0) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME[0]; +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) unsigned LEN_NAME[0]; +#define pci_unmap_addr(PTR, ADDR_NAME) sizeof((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ + do { break; } while (pci_unmap_addr(PTR, ADDR_NAME)) +#define pci_unmap_len(PTR, LEN_NAME) sizeof((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ + do { break; } while (pci_unmap_len(PTR, LEN_NAME)) #endif /* __KERNEL__ */ diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h index bd26559..bcb5446 100644 --- a/include/asm-x86/pgtable.h +++ b/include/asm-x86/pgtable.h @@ -20,30 +20,25 @@ #define _PAGE_BIT_PAT_LARGE 12 /* On 2MB or 1GB pages */ #define _PAGE_BIT_NX 63 /* No execute: only valid after cpuid check */ -/* - * Note: we use _AC(1, L) instead of _AC(1, UL) so that we get a - * sign-extended value on 32-bit with all 1's in the upper word, - * which preserves the upper pte values on 64-bit ptes: - */ -#define _PAGE_PRESENT (_AC(1, L)<<_PAGE_BIT_PRESENT) -#define _PAGE_RW (_AC(1, L)<<_PAGE_BIT_RW) -#define _PAGE_USER (_AC(1, L)<<_PAGE_BIT_USER) -#define _PAGE_PWT (_AC(1, L)<<_PAGE_BIT_PWT) -#define _PAGE_PCD (_AC(1, L)<<_PAGE_BIT_PCD) -#define _PAGE_ACCESSED (_AC(1, L)<<_PAGE_BIT_ACCESSED) -#define _PAGE_DIRTY (_AC(1, L)<<_PAGE_BIT_DIRTY) -#define _PAGE_PSE (_AC(1, L)<<_PAGE_BIT_PSE) /* 2MB page */ -#define _PAGE_GLOBAL (_AC(1, L)<<_PAGE_BIT_GLOBAL) /* Global TLB entry */ -#define _PAGE_UNUSED1 (_AC(1, L)<<_PAGE_BIT_UNUSED1) -#define _PAGE_UNUSED2 (_AC(1, L)<<_PAGE_BIT_UNUSED2) -#define _PAGE_UNUSED3 (_AC(1, L)<<_PAGE_BIT_UNUSED3) -#define _PAGE_PAT (_AC(1, L)<<_PAGE_BIT_PAT) -#define _PAGE_PAT_LARGE (_AC(1, L)<<_PAGE_BIT_PAT_LARGE) +#define _PAGE_PRESENT (_AT(pteval_t, 1) << _PAGE_BIT_PRESENT) +#define _PAGE_RW (_AT(pteval_t, 1) << _PAGE_BIT_RW) +#define _PAGE_USER (_AT(pteval_t, 1) << _PAGE_BIT_USER) +#define _PAGE_PWT (_AT(pteval_t, 1) << _PAGE_BIT_PWT) +#define _PAGE_PCD (_AT(pteval_t, 1) << _PAGE_BIT_PCD) +#define _PAGE_ACCESSED (_AT(pteval_t, 1) << _PAGE_BIT_ACCESSED) +#define _PAGE_DIRTY (_AT(pteval_t, 1) << _PAGE_BIT_DIRTY) +#define _PAGE_PSE (_AT(pteval_t, 1) << _PAGE_BIT_PSE) +#define _PAGE_GLOBAL (_AT(pteval_t, 1) << _PAGE_BIT_GLOBAL) +#define _PAGE_UNUSED1 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED1) +#define _PAGE_UNUSED2 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED2) +#define _PAGE_UNUSED3 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED3) +#define _PAGE_PAT (_AT(pteval_t, 1) << _PAGE_BIT_PAT) +#define _PAGE_PAT_LARGE (_AT(pteval_t, 1) << _PAGE_BIT_PAT_LARGE) #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE) -#define _PAGE_NX (_AC(1, ULL) << _PAGE_BIT_NX) +#define _PAGE_NX (_AT(pteval_t, 1) << _PAGE_BIT_NX) #else -#define _PAGE_NX 0 +#define _PAGE_NX (_AT(pteval_t, 0)) #endif /* If _PAGE_PRESENT is clear, we use these: */ @@ -164,37 +159,37 @@ extern struct list_head pgd_list; */ static inline int pte_dirty(pte_t pte) { - return pte_val(pte) & _PAGE_DIRTY; + return pte_flags(pte) & _PAGE_DIRTY; } static inline int pte_young(pte_t pte) { - return pte_val(pte) & _PAGE_ACCESSED; + return pte_flags(pte) & _PAGE_ACCESSED; } static inline int pte_write(pte_t pte) { - return pte_val(pte) & _PAGE_RW; + return pte_flags(pte) & _PAGE_RW; } static inline int pte_file(pte_t pte) { - return pte_val(pte) & _PAGE_FILE; + return pte_flags(pte) & _PAGE_FILE; } static inline int pte_huge(pte_t pte) { - return pte_val(pte) & _PAGE_PSE; + return pte_flags(pte) & _PAGE_PSE; } static inline int pte_global(pte_t pte) { - return pte_val(pte) & _PAGE_GLOBAL; + return pte_flags(pte) & _PAGE_GLOBAL; } static inline int pte_exec(pte_t pte) { - return !(pte_val(pte) & _PAGE_NX); + return !(pte_flags(pte) & _PAGE_NX); } static inline int pte_special(pte_t pte) @@ -210,22 +205,22 @@ static inline int pmd_large(pmd_t pte) static inline pte_t pte_mkclean(pte_t pte) { - return __pte(pte_val(pte) & ~(pteval_t)_PAGE_DIRTY); + return __pte(pte_val(pte) & ~_PAGE_DIRTY); } static inline pte_t pte_mkold(pte_t pte) { - return __pte(pte_val(pte) & ~(pteval_t)_PAGE_ACCESSED); + return __pte(pte_val(pte) & ~_PAGE_ACCESSED); } static inline pte_t pte_wrprotect(pte_t pte) { - return __pte(pte_val(pte) & ~(pteval_t)_PAGE_RW); + return __pte(pte_val(pte) & ~_PAGE_RW); } static inline pte_t pte_mkexec(pte_t pte) { - return __pte(pte_val(pte) & ~(pteval_t)_PAGE_NX); + return __pte(pte_val(pte) & ~_PAGE_NX); } static inline pte_t pte_mkdirty(pte_t pte) @@ -250,7 +245,7 @@ static inline pte_t pte_mkhuge(pte_t pte) static inline pte_t pte_clrhuge(pte_t pte) { - return __pte(pte_val(pte) & ~(pteval_t)_PAGE_PSE); + return __pte(pte_val(pte) & ~_PAGE_PSE); } static inline pte_t pte_mkglobal(pte_t pte) @@ -260,7 +255,7 @@ static inline pte_t pte_mkglobal(pte_t pte) static inline pte_t pte_clrglobal(pte_t pte) { - return __pte(pte_val(pte) & ~(pteval_t)_PAGE_GLOBAL); + return __pte(pte_val(pte) & ~_PAGE_GLOBAL); } static inline pte_t pte_mkspecial(pte_t pte) @@ -305,7 +300,7 @@ static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot) return __pgprot(preservebits | addbits); } -#define pte_pgprot(x) __pgprot(pte_val(x) & ~PTE_MASK) +#define pte_pgprot(x) __pgprot(pte_flags(x) & ~PTE_MASK) #define canon_pgprot(p) __pgprot(pgprot_val(p) & __supported_pte_mask) diff --git a/include/asm-x86/processor-flags.h b/include/asm-x86/processor-flags.h index 199cab1..092b39b 100644 --- a/include/asm-x86/processor-flags.h +++ b/include/asm-x86/processor-flags.h @@ -88,4 +88,10 @@ #define CX86_ARR_BASE 0xc4 #define CX86_RCR_BASE 0xdc +#ifdef CONFIG_VM86 +#define X86_VM_MASK X86_EFLAGS_VM +#else +#define X86_VM_MASK 0 /* No VM86 support */ +#endif + #endif /* __ASM_I386_PROCESSOR_FLAGS_H */ diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h index 5591052..4ab2ede 100644 --- a/include/asm-x86/processor.h +++ b/include/asm-x86/processor.h @@ -263,15 +263,11 @@ struct tss_struct { struct thread_struct *io_bitmap_owner; /* - * Pad the TSS to be cacheline-aligned (size is 0x100): - */ - unsigned long __cacheline_filler[35]; - /* * .. and then another 0x100 bytes for the emergency kernel stack: */ unsigned long stack[64]; -} __attribute__((packed)); +} ____cacheline_aligned; DECLARE_PER_CPU(struct tss_struct, init_tss); diff --git a/include/asm-x86/ptrace.h b/include/asm-x86/ptrace.h index 9f922b0..8a71db8 100644 --- a/include/asm-x86/ptrace.h +++ b/include/asm-x86/ptrace.h @@ -3,7 +3,12 @@ #include <linux/compiler.h> /* For __user */ #include <asm/ptrace-abi.h> +#include <asm/processor-flags.h> +#ifdef __KERNEL__ +#include <asm/ds.h> /* the DS BTS struct is used for ptrace too */ +#include <asm/segment.h> +#endif #ifndef __ASSEMBLY__ @@ -55,9 +60,6 @@ struct pt_regs { unsigned long ss; }; -#include <asm/vm86.h> -#include <asm/segment.h> - #endif /* __KERNEL__ */ #else /* __i386__ */ diff --git a/include/asm-x86/reboot.h b/include/asm-x86/reboot.h index e63741f..206f355 100644 --- a/include/asm-x86/reboot.h +++ b/include/asm-x86/reboot.h @@ -14,8 +14,8 @@ struct machine_ops { extern struct machine_ops machine_ops; -void machine_real_restart(unsigned char *code, int length); void native_machine_crash_shutdown(struct pt_regs *regs); void native_machine_shutdown(void); +void machine_real_restart(const unsigned char *code, int length); #endif /* _ASM_REBOOT_H */ diff --git a/include/asm-x86/required-features.h b/include/asm-x86/required-features.h index 7400d3a..8c38719 100644 --- a/include/asm-x86/required-features.h +++ b/include/asm-x86/required-features.h @@ -19,9 +19,13 @@ #if defined(CONFIG_X86_PAE) || defined(CONFIG_X86_64) # define NEED_PAE (1<<(X86_FEATURE_PAE & 31)) -# define NEED_CX8 (1<<(X86_FEATURE_CX8 & 31)) #else # define NEED_PAE 0 +#endif + +#ifdef CONFIG_X86_CMPXCHG64 +# define NEED_CX8 (1<<(X86_FEATURE_CX8 & 31)) +#else # define NEED_CX8 0 #endif diff --git a/include/asm-x86/resume-trace.h b/include/asm-x86/resume-trace.h index 2557514..8d9f0b4 100644 --- a/include/asm-x86/resume-trace.h +++ b/include/asm-x86/resume-trace.h @@ -6,7 +6,7 @@ #define TRACE_RESUME(user) \ do { \ if (pm_trace_enabled) { \ - void *tracedata; \ + const void *tracedata; \ asm volatile(_ASM_MOV_UL " $1f,%0\n" \ ".section .tracedata,\"a\"\n" \ "1:\t.word %c1\n\t" \ diff --git a/include/asm-x86/seccomp_32.h b/include/asm-x86/seccomp_32.h index 18da19e..36e71c5 100644 --- a/include/asm-x86/seccomp_32.h +++ b/include/asm-x86/seccomp_32.h @@ -1,4 +1,5 @@ #ifndef _ASM_SECCOMP_H +#define _ASM_SECCOMP_H #include <linux/thread_info.h> diff --git a/include/asm-x86/seccomp_64.h b/include/asm-x86/seccomp_64.h index 553af65..76cfe69 100644 --- a/include/asm-x86/seccomp_64.h +++ b/include/asm-x86/seccomp_64.h @@ -1,4 +1,5 @@ #ifndef _ASM_SECCOMP_H +#define _ASM_SECCOMP_H #include <linux/thread_info.h> diff --git a/include/asm-x86/string_32.h b/include/asm-x86/string_32.h index b49369a..193578c 100644 --- a/include/asm-x86/string_32.h +++ b/include/asm-x86/string_32.h @@ -29,81 +29,116 @@ extern char *strchr(const char *s, int c); #define __HAVE_ARCH_STRLEN extern size_t strlen(const char *s); -static __always_inline void * __memcpy(void * to, const void * from, size_t n) +static __always_inline void *__memcpy(void *to, const void *from, size_t n) { -int d0, d1, d2; -__asm__ __volatile__( - "rep ; movsl\n\t" - "movl %4,%%ecx\n\t" - "andl $3,%%ecx\n\t" - "jz 1f\n\t" - "rep ; movsb\n\t" - "1:" - : "=&c" (d0), "=&D" (d1), "=&S" (d2) - : "0" (n/4), "g" (n), "1" ((long) to), "2" ((long) from) - : "memory"); -return (to); + int d0, d1, d2; + asm volatile("rep ; movsl\n\t" + "movl %4,%%ecx\n\t" + "andl $3,%%ecx\n\t" + "jz 1f\n\t" + "rep ; movsb\n\t" + "1:" + : "=&c" (d0), "=&D" (d1), "=&S" (d2) + : "0" (n / 4), "g" (n), "1" ((long)to), "2" ((long)from) + : "memory"); + return to; } /* * This looks ugly, but the compiler can optimize it totally, * as the count is constant. */ -static __always_inline void * __constant_memcpy(void * to, const void * from, size_t n) +static __always_inline void *__constant_memcpy(void *to, const void *from, + size_t n) { long esi, edi; - if (!n) return to; -#if 1 /* want to do small copies with non-string ops? */ + if (!n) + return to; + switch (n) { - case 1: *(char*)to = *(char*)from; return to; - case 2: *(short*)to = *(short*)from; return to; - case 4: *(int*)to = *(int*)from; return to; -#if 1 /* including those doable with two moves? */ - case 3: *(short*)to = *(short*)from; - *((char*)to+2) = *((char*)from+2); return to; - case 5: *(int*)to = *(int*)from; - *((char*)to+4) = *((char*)from+4); return to; - case 6: *(int*)to = *(int*)from; - *((short*)to+2) = *((short*)from+2); return to; - case 8: *(int*)to = *(int*)from; - *((int*)to+1) = *((int*)from+1); return to; -#endif + case 1: + *(char *)to = *(char *)from; + return to; + case 2: + *(short *)to = *(short *)from; + return to; + case 4: + *(int *)to = *(int *)from; + return to; + + case 3: + *(short *)to = *(short *)from; + *((char *)to + 2) = *((char *)from + 2); + return to; + case 5: + *(int *)to = *(int *)from; + *((char *)to + 4) = *((char *)from + 4); + return to; + case 6: + *(int *)to = *(int *)from; + *((short *)to + 2) = *((short *)from + 2); + return to; + case 8: + *(int *)to = *(int *)from; + *((int *)to + 1) = *((int *)from + 1); + return to; } -#endif - esi = (long) from; - edi = (long) to; - if (n >= 5*4) { + + esi = (long)from; + edi = (long)to; + if (n >= 5 * 4) { /* large block: use rep prefix */ int ecx; - __asm__ __volatile__( - "rep ; movsl" - : "=&c" (ecx), "=&D" (edi), "=&S" (esi) - : "0" (n/4), "1" (edi),"2" (esi) - : "memory" + asm volatile("rep ; movsl" + : "=&c" (ecx), "=&D" (edi), "=&S" (esi) + : "0" (n / 4), "1" (edi), "2" (esi) + : "memory" ); } else { /* small block: don't clobber ecx + smaller code */ - if (n >= 4*4) __asm__ __volatile__("movsl" - :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory"); - if (n >= 3*4) __asm__ __volatile__("movsl" - :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory"); - if (n >= 2*4) __asm__ __volatile__("movsl" - :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory"); - if (n >= 1*4) __asm__ __volatile__("movsl" - :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory"); + if (n >= 4 * 4) + asm volatile("movsl" + : "=&D"(edi), "=&S"(esi) + : "0"(edi), "1"(esi) + : "memory"); + if (n >= 3 * 4) + asm volatile("movsl" + : "=&D"(edi), "=&S"(esi) + : "0"(edi), "1"(esi) + : "memory"); + if (n >= 2 * 4) + asm volatile("movsl" + : "=&D"(edi), "=&S"(esi) + : "0"(edi), "1"(esi) + : "memory"); + if (n >= 1 * 4) + asm volatile("movsl" + : "=&D"(edi), "=&S"(esi) + : "0"(edi), "1"(esi) + : "memory"); } switch (n % 4) { /* tail */ - case 0: return to; - case 1: __asm__ __volatile__("movsb" - :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory"); - return to; - case 2: __asm__ __volatile__("movsw" - :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory"); - return to; - default: __asm__ __volatile__("movsw\n\tmovsb" - :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory"); - return to; + case 0: + return to; + case 1: + asm volatile("movsb" + : "=&D"(edi), "=&S"(esi) + : "0"(edi), "1"(esi) + : "memory"); + return to; + case 2: + asm volatile("movsw" + : "=&D"(edi), "=&S"(esi) + : "0"(edi), "1"(esi) + : "memory"); + return to; + default: + asm volatile("movsw\n\tmovsb" + : "=&D"(edi), "=&S"(esi) + : "0"(edi), "1"(esi) + : "memory"); + return to; } } @@ -117,87 +152,86 @@ static __always_inline void * __constant_memcpy(void * to, const void * from, si * This CPU favours 3DNow strongly (eg AMD Athlon) */ -static inline void * __constant_memcpy3d(void * to, const void * from, size_t len) +static inline void *__constant_memcpy3d(void *to, const void *from, size_t len) { if (len < 512) return __constant_memcpy(to, from, len); return _mmx_memcpy(to, from, len); } -static __inline__ void *__memcpy3d(void *to, const void *from, size_t len) +static inline void *__memcpy3d(void *to, const void *from, size_t len) { if (len < 512) return __memcpy(to, from, len); return _mmx_memcpy(to, from, len); } -#define memcpy(t, f, n) \ -(__builtin_constant_p(n) ? \ - __constant_memcpy3d((t),(f),(n)) : \ - __memcpy3d((t),(f),(n))) +#define memcpy(t, f, n) \ + (__builtin_constant_p((n)) \ + ? __constant_memcpy3d((t), (f), (n)) \ + : __memcpy3d((t), (f), (n))) #else /* * No 3D Now! */ - -#define memcpy(t, f, n) \ -(__builtin_constant_p(n) ? \ - __constant_memcpy((t),(f),(n)) : \ - __memcpy((t),(f),(n))) + +#define memcpy(t, f, n) \ + (__builtin_constant_p((n)) \ + ? __constant_memcpy((t), (f), (n)) \ + : __memcpy((t), (f), (n))) #endif #define __HAVE_ARCH_MEMMOVE -void *memmove(void * dest,const void * src, size_t n); +void *memmove(void *dest, const void *src, size_t n); #define memcmp __builtin_memcmp #define __HAVE_ARCH_MEMCHR -extern void *memchr(const void * cs,int c,size_t count); +extern void *memchr(const void *cs, int c, size_t count); -static inline void * __memset_generic(void * s, char c,size_t count) +static inline void *__memset_generic(void *s, char c, size_t count) { -int d0, d1; -__asm__ __volatile__( - "rep\n\t" - "stosb" - : "=&c" (d0), "=&D" (d1) - :"a" (c),"1" (s),"0" (count) - :"memory"); -return s; + int d0, d1; + asm volatile("rep\n\t" + "stosb" + : "=&c" (d0), "=&D" (d1) + : "a" (c), "1" (s), "0" (count) + : "memory"); + return s; } /* we might want to write optimized versions of these later */ -#define __constant_count_memset(s,c,count) __memset_generic((s),(c),(count)) +#define __constant_count_memset(s, c, count) __memset_generic((s), (c), (count)) /* - * memset(x,0,y) is a reasonably common thing to do, so we want to fill + * memset(x, 0, y) is a reasonably common thing to do, so we want to fill * things 32 bits at a time even when we don't know the size of the * area at compile-time.. */ -static __always_inline void * __constant_c_memset(void * s, unsigned long c, size_t count) +static __always_inline +void *__constant_c_memset(void *s, unsigned long c, size_t count) { -int d0, d1; -__asm__ __volatile__( - "rep ; stosl\n\t" - "testb $2,%b3\n\t" - "je 1f\n\t" - "stosw\n" - "1:\ttestb $1,%b3\n\t" - "je 2f\n\t" - "stosb\n" - "2:" - :"=&c" (d0), "=&D" (d1) - :"a" (c), "q" (count), "0" (count/4), "1" ((long) s) - :"memory"); -return (s); + int d0, d1; + asm volatile("rep ; stosl\n\t" + "testb $2,%b3\n\t" + "je 1f\n\t" + "stosw\n" + "1:\ttestb $1,%b3\n\t" + "je 2f\n\t" + "stosb\n" + "2:" + : "=&c" (d0), "=&D" (d1) + : "a" (c), "q" (count), "0" (count/4), "1" ((long)s) + : "memory"); + return s; } /* Added by Gertjan van Wingerde to make minix and sysv module work */ #define __HAVE_ARCH_STRNLEN -extern size_t strnlen(const char * s, size_t count); +extern size_t strnlen(const char *s, size_t count); /* end of additional stuff */ #define __HAVE_ARCH_STRSTR @@ -207,66 +241,85 @@ extern char *strstr(const char *cs, const char *ct); * This looks horribly ugly, but the compiler can optimize it totally, * as we by now know that both pattern and count is constant.. */ -static __always_inline void * __constant_c_and_count_memset(void * s, unsigned long pattern, size_t count) +static __always_inline +void *__constant_c_and_count_memset(void *s, unsigned long pattern, + size_t count) { switch (count) { + case 0: + return s; + case 1: + *(unsigned char *)s = pattern & 0xff; + return s; + case 2: + *(unsigned short *)s = pattern & 0xffff; + return s; + case 3: + *(unsigned short *)s = pattern & 0xffff; + *((unsigned char *)s + 2) = pattern & 0xff; + return s; + case 4: + *(unsigned long *)s = pattern; + return s; + } + +#define COMMON(x) \ + asm volatile("rep ; stosl" \ + x \ + : "=&c" (d0), "=&D" (d1) \ + : "a" (eax), "0" (count/4), "1" ((long)s) \ + : "memory") + + { + int d0, d1; +#if __GNUC__ == 4 && __GNUC_MINOR__ == 0 + /* Workaround for broken gcc 4.0 */ + register unsigned long eax asm("%eax") = pattern; +#else + unsigned long eax = pattern; +#endif + + switch (count % 4) { case 0: + COMMON(""); return s; case 1: - *(unsigned char *)s = pattern & 0xff; + COMMON("\n\tstosb"); return s; case 2: - *(unsigned short *)s = pattern & 0xffff; + COMMON("\n\tstosw"); return s; - case 3: - *(unsigned short *)s = pattern & 0xffff; - *(2+(unsigned char *)s) = pattern & 0xff; - return s; - case 4: - *(unsigned long *)s = pattern; + default: + COMMON("\n\tstosw\n\tstosb"); return s; + } } -#define COMMON(x) \ -__asm__ __volatile__( \ - "rep ; stosl" \ - x \ - : "=&c" (d0), "=&D" (d1) \ - : "a" (pattern),"0" (count/4),"1" ((long) s) \ - : "memory") -{ - int d0, d1; - switch (count % 4) { - case 0: COMMON(""); return s; - case 1: COMMON("\n\tstosb"); return s; - case 2: COMMON("\n\tstosw"); return s; - default: COMMON("\n\tstosw\n\tstosb"); return s; - } -} - + #undef COMMON } -#define __constant_c_x_memset(s, c, count) \ -(__builtin_constant_p(count) ? \ - __constant_c_and_count_memset((s),(c),(count)) : \ - __constant_c_memset((s),(c),(count))) +#define __constant_c_x_memset(s, c, count) \ + (__builtin_constant_p(count) \ + ? __constant_c_and_count_memset((s), (c), (count)) \ + : __constant_c_memset((s), (c), (count))) -#define __memset(s, c, count) \ -(__builtin_constant_p(count) ? \ - __constant_count_memset((s),(c),(count)) : \ - __memset_generic((s),(c),(count))) +#define __memset(s, c, count) \ + (__builtin_constant_p(count) \ + ? __constant_count_memset((s), (c), (count)) \ + : __memset_generic((s), (c), (count))) #define __HAVE_ARCH_MEMSET -#define memset(s, c, count) \ -(__builtin_constant_p(c) ? \ - __constant_c_x_memset((s),(0x01010101UL*(unsigned char)(c)),(count)) : \ - __memset((s),(c),(count))) +#define memset(s, c, count) \ + (__builtin_constant_p(c) \ + ? __constant_c_x_memset((s), (0x01010101UL * (unsigned char)(c)), \ + (count)) \ + : __memset((s), (c), (count))) /* * find the first occurrence of byte 'c', or 1 past the area if none */ #define __HAVE_ARCH_MEMSCAN -extern void *memscan(void * addr, int c, size_t size); +extern void *memscan(void *addr, int c, size_t size); #endif /* __KERNEL__ */ diff --git a/include/asm-x86/suspend_32.h b/include/asm-x86/suspend_32.h index 24e1c08..8675c67 100644 --- a/include/asm-x86/suspend_32.h +++ b/include/asm-x86/suspend_32.h @@ -3,6 +3,9 @@ * Based on code * Copyright 2001 Patrick Mochel <mochel@osdl.org> */ +#ifndef __ASM_X86_32_SUSPEND_H +#define __ASM_X86_32_SUSPEND_H + #include <asm/desc.h> #include <asm/i387.h> @@ -44,3 +47,5 @@ static inline void acpi_save_register_state(unsigned long return_point) /* routines for saving/restoring kernel state */ extern int acpi_save_state_mem(void); #endif + +#endif /* __ASM_X86_32_SUSPEND_H */ diff --git a/include/asm-x86/system.h b/include/asm-x86/system.h index a2f04cd..7e4c133 100644 --- a/include/asm-x86/system.h +++ b/include/asm-x86/system.h @@ -289,7 +289,7 @@ static inline void native_wbinvd(void) #endif/* CONFIG_PARAVIRT */ -#define stts() write_cr0(8 | read_cr0()) +#define stts() write_cr0(read_cr0() | X86_CR0_TS) #endif /* __KERNEL__ */ diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index 77244f1..895339d 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -1,9 +1,253 @@ +/* thread_info.h: low-level thread information + * + * Copyright (C) 2002 David Howells (dhowells@redhat.com) + * - Incorporating suggestions made by Linus Torvalds and Dave Miller + */ + #ifndef _ASM_X86_THREAD_INFO_H +#define _ASM_X86_THREAD_INFO_H + +#include <linux/compiler.h> +#include <asm/page.h> +#include <asm/types.h> + +/* + * low level task data that entry.S needs immediate access to + * - this struct should fit entirely inside of one cache line + * - this struct shares the supervisor stack pages + */ +#ifndef __ASSEMBLY__ +struct task_struct; +struct exec_domain; +#include <asm/processor.h> + +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + __u32 status; /* thread synchronous flags */ + __u32 cpu; /* current CPU */ + int preempt_count; /* 0 => preemptable, + <0 => BUG */ + mm_segment_t addr_limit; + struct restart_block restart_block; + void __user *sysenter_return; +#ifdef CONFIG_X86_32 + unsigned long previous_esp; /* ESP of the previous stack in + case of nested (IRQ) stacks + */ + __u8 supervisor_stack[0]; +#endif +}; + +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +#else /* !__ASSEMBLY__ */ + +#include <asm/asm-offsets.h> + +#endif + +/* + * thread information flags + * - these are process state flags that various assembly files + * may need to access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + * Warning: layout of LSW is hardcoded in entry.S + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_SINGLESTEP 4 /* reenable singlestep on user return*/ +#define TIF_IRET 5 /* force IRET */ #ifdef CONFIG_X86_32 -# include "thread_info_32.h" +#define TIF_SYSCALL_EMU 6 /* syscall emulation active */ +#endif +#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ +#define TIF_SECCOMP 8 /* secure computing */ +#define TIF_MCE_NOTIFY 10 /* notify userspace of an MCE */ +#define TIF_HRTICK_RESCHED 11 /* reprogram hrtick timer */ +#define TIF_NOTSC 16 /* TSC is not accessible in userland */ +#define TIF_IA32 17 /* 32bit process */ +#define TIF_FORK 18 /* ret_from_fork */ +#define TIF_ABI_PENDING 19 +#define TIF_MEMDIE 20 +#define TIF_DEBUG 21 /* uses debug registers */ +#define TIF_IO_BITMAP 22 /* uses I/O bitmap */ +#define TIF_FREEZE 23 /* is freezing for suspend */ +#define TIF_FORCED_TF 24 /* true if TF in eflags artificially */ +#define TIF_DEBUGCTLMSR 25 /* uses thread_struct.debugctlmsr */ +#define TIF_DS_AREA_MSR 26 /* uses thread_struct.ds_area_msr */ +#define TIF_BTS_TRACE_TS 27 /* record scheduling event timestamps */ + +#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) +#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) +#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) +#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) +#define _TIF_IRET (1 << TIF_IRET) +#ifdef CONFIG_X86_32 +#define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU) #else -# include "thread_info_64.h" +#define _TIF_SYSCALL_EMU 0 #endif +#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) +#define _TIF_SECCOMP (1 << TIF_SECCOMP) +#define _TIF_MCE_NOTIFY (1 << TIF_MCE_NOTIFY) +#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) +#define _TIF_NOTSC (1 << TIF_NOTSC) +#define _TIF_IA32 (1 << TIF_IA32) +#define _TIF_FORK (1 << TIF_FORK) +#define _TIF_ABI_PENDING (1 << TIF_ABI_PENDING) +#define _TIF_DEBUG (1 << TIF_DEBUG) +#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) +#define _TIF_FREEZE (1 << TIF_FREEZE) +#define _TIF_FORCED_TF (1 << TIF_FORCED_TF) +#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR) +#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR) +#define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS) + +/* work to do on interrupt/exception return */ +#define _TIF_WORK_MASK \ + (0x0000FFFF & \ + ~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP| \ + _TIF_SECCOMP|_TIF_SYSCALL_EMU)) + +/* work to do on any return to user space */ +#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP) + +/* Only used for 64 bit */ +#define _TIF_DO_NOTIFY_MASK \ + (_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY|_TIF_HRTICK_RESCHED) + +/* flags to check in __switch_to() */ +#define _TIF_WORK_CTXSW \ + (_TIF_IO_BITMAP|_TIF_DEBUGCTLMSR|_TIF_DS_AREA_MSR|_TIF_BTS_TRACE_TS| \ + _TIF_NOTSC) + +#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW +#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG) + +#define PREEMPT_ACTIVE 0x10000000 + +/* thread information allocation */ +#ifdef CONFIG_DEBUG_STACK_USAGE +#define THREAD_FLAGS (GFP_KERNEL | __GFP_ZERO) +#else +#define THREAD_FLAGS GFP_KERNEL +#endif + +#define alloc_thread_info(tsk) \ + ((struct thread_info *)__get_free_pages(THREAD_FLAGS, THREAD_ORDER)) + +#ifdef CONFIG_X86_32 + +#define STACK_WARN (THREAD_SIZE/8) +/* + * macros/functions for gaining access to the thread information structure + * + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#ifndef __ASSEMBLY__ + + +/* how to get the current stack pointer from C */ +register unsigned long current_stack_pointer asm("esp") __used; + +/* how to get the thread information struct from C */ +static inline struct thread_info *current_thread_info(void) +{ + return (struct thread_info *) + (current_stack_pointer & ~(THREAD_SIZE - 1)); +} + +#else /* !__ASSEMBLY__ */ + +/* how to get the thread information struct from ASM */ +#define GET_THREAD_INFO(reg) \ + movl $-THREAD_SIZE, reg; \ + andl %esp, reg + +/* use this one if reg already contains %esp */ +#define GET_THREAD_INFO_WITH_ESP(reg) \ + andl $-THREAD_SIZE, reg + +#endif + +#else /* X86_32 */ + +#include <asm/pda.h> + +/* + * macros/functions for gaining access to the thread information structure + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#ifndef __ASSEMBLY__ +static inline struct thread_info *current_thread_info(void) +{ + struct thread_info *ti; + ti = (void *)(read_pda(kernelstack) + PDA_STACKOFFSET - THREAD_SIZE); + return ti; +} + +/* do not use in interrupt context */ +static inline struct thread_info *stack_thread_info(void) +{ + struct thread_info *ti; + asm("andq %%rsp,%0; " : "=r" (ti) : "0" (~(THREAD_SIZE - 1))); + return ti; +} + +#else /* !__ASSEMBLY__ */ + +/* how to get the thread information struct from ASM */ +#define GET_THREAD_INFO(reg) \ + movq %gs:pda_kernelstack,reg ; \ + subq $(THREAD_SIZE-PDA_STACKOFFSET),reg + +#endif + +#endif /* !X86_32 */ + +/* + * Thread-synchronous status. + * + * This is different from the flags in that nobody else + * ever touches our thread-synchronous status, so we don't + * have to worry about atomic accesses. + */ +#define TS_USEDFPU 0x0001 /* FPU was used by this task + this quantum (SMP) */ +#define TS_COMPAT 0x0002 /* 32bit syscall active (64BIT)*/ +#define TS_POLLING 0x0004 /* true if in idle loop + and not sleeping */ +#define TS_RESTORE_SIGMASK 0x0008 /* restore signal mask in do_signal() */ + +#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) + +#ifndef __ASSEMBLY__ +#define HAVE_SET_RESTORE_SIGMASK 1 +static inline void set_restore_sigmask(void) +{ + struct thread_info *ti = current_thread_info(); + ti->status |= TS_RESTORE_SIGMASK; + set_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags); +} +#endif /* !__ASSEMBLY__ */ #ifndef __ASSEMBLY__ extern void arch_task_cache_init(void); diff --git a/include/asm-x86/thread_info_32.h b/include/asm-x86/thread_info_32.h deleted file mode 100644 index b633882..0000000 --- a/include/asm-x86/thread_info_32.h +++ /dev/null @@ -1,205 +0,0 @@ -/* thread_info.h: i386 low-level thread information - * - * Copyright (C) 2002 David Howells (dhowells@redhat.com) - * - Incorporating suggestions made by Linus Torvalds and Dave Miller - */ - -#ifndef _ASM_THREAD_INFO_H -#define _ASM_THREAD_INFO_H - -#ifdef __KERNEL__ - -#include <linux/compiler.h> -#include <asm/page.h> - -#ifndef __ASSEMBLY__ -#include <asm/processor.h> -#endif - -/* - * low level task data that entry.S needs immediate access to - * - this struct should fit entirely inside of one cache line - * - this struct shares the supervisor stack pages - * - if the contents of this structure are changed, - * the assembly constants must also be changed - */ -#ifndef __ASSEMBLY__ - -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - unsigned long flags; /* low level flags */ - unsigned long status; /* thread-synchronous flags */ - __u32 cpu; /* current CPU */ - int preempt_count; /* 0 => preemptable, - <0 => BUG */ - mm_segment_t addr_limit; /* thread address space: - 0-0xBFFFFFFF user-thread - 0-0xFFFFFFFF kernel-thread - */ - void *sysenter_return; - struct restart_block restart_block; - unsigned long previous_esp; /* ESP of the previous stack in - case of nested (IRQ) stacks - */ - __u8 supervisor_stack[0]; -}; - -#else /* !__ASSEMBLY__ */ - -#include <asm/asm-offsets.h> - -#endif - -#define PREEMPT_ACTIVE 0x10000000 -#ifdef CONFIG_4KSTACKS -#define THREAD_SIZE (4096) -#else -#define THREAD_SIZE (8192) -#endif - -#define STACK_WARN (THREAD_SIZE/8) -/* - * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. - */ -#ifndef __ASSEMBLY__ - -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .addr_limit = KERNEL_DS, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - - -/* how to get the current stack pointer from C */ -register unsigned long current_stack_pointer asm("esp") __used; - -/* how to get the thread information struct from C */ -static inline struct thread_info *current_thread_info(void) -{ - return (struct thread_info *) - (current_stack_pointer & ~(THREAD_SIZE - 1)); -} - -/* thread information allocation */ -#ifdef CONFIG_DEBUG_STACK_USAGE -#define alloc_thread_info(tsk) ((struct thread_info *) \ - __get_free_pages(GFP_KERNEL | __GFP_ZERO, get_order(THREAD_SIZE))) -#else -#define alloc_thread_info(tsk) ((struct thread_info *) \ - __get_free_pages(GFP_KERNEL, get_order(THREAD_SIZE))) -#endif - -#else /* !__ASSEMBLY__ */ - -/* how to get the thread information struct from ASM */ -#define GET_THREAD_INFO(reg) \ - movl $-THREAD_SIZE, reg; \ - andl %esp, reg - -/* use this one if reg already contains %esp */ -#define GET_THREAD_INFO_WITH_ESP(reg) \ - andl $-THREAD_SIZE, reg - -#endif - -/* - * thread information flags - * - these are process state flags that various - * assembly files may need to access - * - pending work-to-be-done flags are in LSW - * - other flags in MSW - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 1 /* signal pending */ -#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_SINGLESTEP 3 /* restore singlestep on return to - user mode */ -#define TIF_IRET 4 /* return with iret */ -#define TIF_SYSCALL_EMU 5 /* syscall emulation active */ -#define TIF_SYSCALL_AUDIT 6 /* syscall auditing active */ -#define TIF_SECCOMP 7 /* secure computing */ -#define TIF_HRTICK_RESCHED 9 /* reprogram hrtick timer */ -#define TIF_MEMDIE 16 -#define TIF_DEBUG 17 /* uses debug registers */ -#define TIF_IO_BITMAP 18 /* uses I/O bitmap */ -#define TIF_FREEZE 19 /* is freezing for suspend */ -#define TIF_NOTSC 20 /* TSC is not accessible in userland */ -#define TIF_FORCED_TF 21 /* true if TF in eflags artificially */ -#define TIF_DEBUGCTLMSR 22 /* uses thread_struct.debugctlmsr */ -#define TIF_DS_AREA_MSR 23 /* uses thread_struct.ds_area_msr */ -#define TIF_BTS_TRACE_TS 24 /* record scheduling event timestamps */ - -#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) -#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) -#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) -#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) -#define _TIF_IRET (1 << TIF_IRET) -#define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU) -#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) -#define _TIF_SECCOMP (1 << TIF_SECCOMP) -#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) -#define _TIF_DEBUG (1 << TIF_DEBUG) -#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) -#define _TIF_FREEZE (1 << TIF_FREEZE) -#define _TIF_NOTSC (1 << TIF_NOTSC) -#define _TIF_FORCED_TF (1 << TIF_FORCED_TF) -#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR) -#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR) -#define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS) - -/* work to do on interrupt/exception return */ -#define _TIF_WORK_MASK \ - (0x0000FFFF & ~(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ - _TIF_SECCOMP | _TIF_SYSCALL_EMU)) -/* work to do on any return to u-space */ -#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP) - -/* flags to check in __switch_to() */ -#define _TIF_WORK_CTXSW \ - (_TIF_IO_BITMAP | _TIF_NOTSC | _TIF_DEBUGCTLMSR | \ - _TIF_DS_AREA_MSR | _TIF_BTS_TRACE_TS) -#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW -#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW | _TIF_DEBUG) - - -/* - * Thread-synchronous status. - * - * This is different from the flags in that nobody else - * ever touches our thread-synchronous status, so we don't - * have to worry about atomic accesses. - */ -#define TS_USEDFPU 0x0001 /* FPU was used by this task - this quantum (SMP) */ -#define TS_POLLING 0x0002 /* True if in idle loop - and not sleeping */ -#define TS_RESTORE_SIGMASK 0x0004 /* restore signal mask in do_signal() */ - -#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) - -#ifndef __ASSEMBLY__ -#define HAVE_SET_RESTORE_SIGMASK 1 -static inline void set_restore_sigmask(void) -{ - struct thread_info *ti = current_thread_info(); - ti->status |= TS_RESTORE_SIGMASK; - set_bit(TIF_SIGPENDING, &ti->flags); -} -#endif /* !__ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_THREAD_INFO_H */ diff --git a/include/asm-x86/thread_info_64.h b/include/asm-x86/thread_info_64.h deleted file mode 100644 index cb69f70..0000000 --- a/include/asm-x86/thread_info_64.h +++ /dev/null @@ -1,195 +0,0 @@ -/* thread_info.h: x86_64 low-level thread information - * - * Copyright (C) 2002 David Howells (dhowells@redhat.com) - * - Incorporating suggestions made by Linus Torvalds and Dave Miller - */ - -#ifndef _ASM_THREAD_INFO_H -#define _ASM_THREAD_INFO_H - -#ifdef __KERNEL__ - -#include <asm/page.h> -#include <asm/types.h> -#include <asm/pda.h> - -/* - * low level task data that entry.S needs immediate access to - * - this struct should fit entirely inside of one cache line - * - this struct shares the supervisor stack pages - */ -#ifndef __ASSEMBLY__ -struct task_struct; -struct exec_domain; -#include <asm/processor.h> - -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - __u32 flags; /* low level flags */ - __u32 status; /* thread synchronous flags */ - __u32 cpu; /* current CPU */ - int preempt_count; /* 0 => preemptable, - <0 => BUG */ - mm_segment_t addr_limit; - struct restart_block restart_block; -#ifdef CONFIG_IA32_EMULATION - void __user *sysenter_return; -#endif -}; -#endif - -/* - * macros/functions for gaining access to the thread information structure - * preempt_count needs to be 1 initially, until the scheduler is functional. - */ -#ifndef __ASSEMBLY__ -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .addr_limit = KERNEL_DS, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - -static inline struct thread_info *current_thread_info(void) -{ - struct thread_info *ti; - ti = (void *)(read_pda(kernelstack) + PDA_STACKOFFSET - THREAD_SIZE); - return ti; -} - -/* do not use in interrupt context */ -static inline struct thread_info *stack_thread_info(void) -{ - struct thread_info *ti; - asm("andq %%rsp,%0; " : "=r" (ti) : "0" (~(THREAD_SIZE - 1))); - return ti; -} - -/* thread information allocation */ -#ifdef CONFIG_DEBUG_STACK_USAGE -#define THREAD_FLAGS (GFP_KERNEL | __GFP_ZERO) -#else -#define THREAD_FLAGS GFP_KERNEL -#endif - -#define alloc_thread_info(tsk) \ - ((struct thread_info *)__get_free_pages(THREAD_FLAGS, THREAD_ORDER)) - -#else /* !__ASSEMBLY__ */ - -/* how to get the thread information struct from ASM */ -#define GET_THREAD_INFO(reg) \ - movq %gs:pda_kernelstack,reg ; \ - subq $(THREAD_SIZE-PDA_STACKOFFSET),reg - -#endif - -/* - * thread information flags - * - these are process state flags that various assembly files - * may need to access - * - pending work-to-be-done flags are in LSW - * - other flags in MSW - * Warning: layout of LSW is hardcoded in entry.S - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 2 /* signal pending */ -#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ -#define TIF_SINGLESTEP 4 /* reenable singlestep on user return*/ -#define TIF_IRET 5 /* force IRET */ -#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ -#define TIF_SECCOMP 8 /* secure computing */ -#define TIF_MCE_NOTIFY 10 /* notify userspace of an MCE */ -#define TIF_HRTICK_RESCHED 11 /* reprogram hrtick timer */ -/* 16 free */ -#define TIF_IA32 17 /* 32bit process */ -#define TIF_FORK 18 /* ret_from_fork */ -#define TIF_ABI_PENDING 19 -#define TIF_MEMDIE 20 -#define TIF_DEBUG 21 /* uses debug registers */ -#define TIF_IO_BITMAP 22 /* uses I/O bitmap */ -#define TIF_FREEZE 23 /* is freezing for suspend */ -#define TIF_FORCED_TF 24 /* true if TF in eflags artificially */ -#define TIF_DEBUGCTLMSR 25 /* uses thread_struct.debugctlmsr */ -#define TIF_DS_AREA_MSR 26 /* uses thread_struct.ds_area_msr */ -#define TIF_BTS_TRACE_TS 27 /* record scheduling event timestamps */ -#define TIF_NOTSC 28 /* TSC is not accessible in userland */ - -#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) -#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) -#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) -#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) -#define _TIF_IRET (1 << TIF_IRET) -#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) -#define _TIF_SECCOMP (1 << TIF_SECCOMP) -#define _TIF_MCE_NOTIFY (1 << TIF_MCE_NOTIFY) -#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) -#define _TIF_IA32 (1 << TIF_IA32) -#define _TIF_FORK (1 << TIF_FORK) -#define _TIF_ABI_PENDING (1 << TIF_ABI_PENDING) -#define _TIF_DEBUG (1 << TIF_DEBUG) -#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) -#define _TIF_FREEZE (1 << TIF_FREEZE) -#define _TIF_FORCED_TF (1 << TIF_FORCED_TF) -#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR) -#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR) -#define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS) -#define _TIF_NOTSC (1 << TIF_NOTSC) - -/* work to do on interrupt/exception return */ -#define _TIF_WORK_MASK \ - (0x0000FFFF & \ - ~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP|_TIF_SECCOMP)) -/* work to do on any return to user space */ -#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP) - -#define _TIF_DO_NOTIFY_MASK \ - (_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY|_TIF_HRTICK_RESCHED) - -/* flags to check in __switch_to() */ -#define _TIF_WORK_CTXSW \ - (_TIF_IO_BITMAP|_TIF_DEBUGCTLMSR|_TIF_DS_AREA_MSR|_TIF_BTS_TRACE_TS|_TIF_NOTSC) -#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW -#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG) - -#define PREEMPT_ACTIVE 0x10000000 - -/* - * Thread-synchronous status. - * - * This is different from the flags in that nobody else - * ever touches our thread-synchronous status, so we don't - * have to worry about atomic accesses. - */ -#define TS_USEDFPU 0x0001 /* FPU was used by this task - this quantum (SMP) */ -#define TS_COMPAT 0x0002 /* 32bit syscall active */ -#define TS_POLLING 0x0004 /* true if in idle loop - and not sleeping */ -#define TS_RESTORE_SIGMASK 0x0008 /* restore signal mask in do_signal() */ - -#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) - -#ifndef __ASSEMBLY__ -#define HAVE_SET_RESTORE_SIGMASK 1 -static inline void set_restore_sigmask(void) -{ - struct thread_info *ti = current_thread_info(); - ti->status |= TS_RESTORE_SIGMASK; - set_bit(TIF_SIGPENDING, &ti->flags); -} -#endif /* !__ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_THREAD_INFO_H */ diff --git a/include/asm-x86/unistd_64.h b/include/asm-x86/unistd_64.h index fe26e36..9c1a4a3 100644 --- a/include/asm-x86/unistd_64.h +++ b/include/asm-x86/unistd_64.h @@ -290,7 +290,7 @@ __SYSCALL(__NR_rt_sigtimedwait, sys_rt_sigtimedwait) #define __NR_rt_sigqueueinfo 129 __SYSCALL(__NR_rt_sigqueueinfo, sys_rt_sigqueueinfo) #define __NR_rt_sigsuspend 130 -__SYSCALL(__NR_rt_sigsuspend, stub_rt_sigsuspend) +__SYSCALL(__NR_rt_sigsuspend, sys_rt_sigsuspend) #define __NR_sigaltstack 131 __SYSCALL(__NR_sigaltstack, stub_sigaltstack) #define __NR_utime 132 diff --git a/include/asm-x86/vm86.h b/include/asm-x86/vm86.h index 074b357..5ce3513 100644 --- a/include/asm-x86/vm86.h +++ b/include/asm-x86/vm86.h @@ -14,12 +14,6 @@ #include <asm/processor-flags.h> -#ifdef CONFIG_VM86 -#define X86_VM_MASK X86_EFLAGS_VM -#else -#define X86_VM_MASK 0 /* No VM86 support */ -#endif - #define BIOSSEG 0x0f000 #define CPU_086 0 @@ -121,7 +115,6 @@ struct vm86plus_info_struct { unsigned long is_vm86pus:1; /* for vm86 internal use */ unsigned char vm86dbg_intxxtab[32]; /* for debugger */ }; - struct vm86plus_struct { struct vm86_regs regs; unsigned long flags; @@ -133,6 +126,9 @@ struct vm86plus_struct { }; #ifdef __KERNEL__ + +#include <asm/ptrace.h> + /* * This is the (kernel) stack-layout when we have done a "SAVE_ALL" from vm86 * mode - the main change is that the old segment descriptors aren't @@ -141,7 +137,6 @@ struct vm86plus_struct { * at the end of the structure. Look at ptrace.h to see the "normal" * setup. For user space layout see 'struct vm86_regs' above. */ -#include <asm/ptrace.h> struct kernel_vm86_regs { /* diff --git a/include/asm-x86/xen/hypercall.h b/include/asm-x86/xen/hypercall.h index c2ccd99..2a4f9b4 100644 --- a/include/asm-x86/xen/hypercall.h +++ b/include/asm-x86/xen/hypercall.h @@ -176,9 +176,9 @@ HYPERVISOR_fpu_taskswitch(int set) } static inline int -HYPERVISOR_sched_op(int cmd, unsigned long arg) +HYPERVISOR_sched_op(int cmd, void *arg) { - return _hypercall2(int, sched_op, cmd, arg); + return _hypercall2(int, sched_op_new, cmd, arg); } static inline long @@ -315,6 +315,13 @@ HYPERVISOR_nmi_op(unsigned long op, unsigned long arg) } static inline void +MULTI_fpu_taskswitch(struct multicall_entry *mcl, int set) +{ + mcl->op = __HYPERVISOR_fpu_taskswitch; + mcl->args[0] = set; +} + +static inline void MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va, pte_t new_val, unsigned long flags) { diff --git a/include/asm-x86/xen/page.h b/include/asm-x86/xen/page.h index e11f240..377c045 100644 --- a/include/asm-x86/xen/page.h +++ b/include/asm-x86/xen/page.h @@ -26,15 +26,20 @@ typedef struct xpaddr { #define FOREIGN_FRAME_BIT (1UL<<31) #define FOREIGN_FRAME(m) ((m) | FOREIGN_FRAME_BIT) -extern unsigned long *phys_to_machine_mapping; +/* Maximum amount of memory we can handle in a domain in pages */ +#define MAX_DOMAIN_PAGES \ + ((unsigned long)((u64)CONFIG_XEN_MAX_DOMAIN_MEMORY * 1024 * 1024 * 1024 / PAGE_SIZE)) + + +extern unsigned long get_phys_to_machine(unsigned long pfn); +extern void set_phys_to_machine(unsigned long pfn, unsigned long mfn); static inline unsigned long pfn_to_mfn(unsigned long pfn) { if (xen_feature(XENFEAT_auto_translated_physmap)) return pfn; - return phys_to_machine_mapping[(unsigned int)(pfn)] & - ~FOREIGN_FRAME_BIT; + return get_phys_to_machine(pfn) & ~FOREIGN_FRAME_BIT; } static inline int phys_to_machine_mapping_valid(unsigned long pfn) @@ -42,7 +47,7 @@ static inline int phys_to_machine_mapping_valid(unsigned long pfn) if (xen_feature(XENFEAT_auto_translated_physmap)) return 1; - return (phys_to_machine_mapping[pfn] != INVALID_P2M_ENTRY); + return get_phys_to_machine(pfn) != INVALID_P2M_ENTRY; } static inline unsigned long mfn_to_pfn(unsigned long mfn) @@ -106,20 +111,12 @@ static inline unsigned long mfn_to_local_pfn(unsigned long mfn) unsigned long pfn = mfn_to_pfn(mfn); if ((pfn < max_mapnr) && !xen_feature(XENFEAT_auto_translated_physmap) - && (phys_to_machine_mapping[pfn] != mfn)) + && (get_phys_to_machine(pfn) != mfn)) return max_mapnr; /* force !pfn_valid() */ + /* XXX fixme; not true with sparsemem */ return pfn; } -static inline void set_phys_to_machine(unsigned long pfn, unsigned long mfn) -{ - if (xen_feature(XENFEAT_auto_translated_physmap)) { - BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY); - return; - } - phys_to_machine_mapping[pfn] = mfn; -} - /* VIRT <-> MACHINE conversion */ #define virt_to_machine(v) (phys_to_machine(XPADDR(__pa(v)))) #define virt_to_mfn(v) (pfn_to_mfn(PFN_DOWN(__pa(v)))) diff --git a/include/asm-x86/xor_32.h b/include/asm-x86/xor_32.h index 067b5c1..921b458 100644 --- a/include/asm-x86/xor_32.h +++ b/include/asm-x86/xor_32.h @@ -1,3 +1,6 @@ +#ifndef ASM_X86__XOR_32_H +#define ASM_X86__XOR_32_H + /* * Optimized RAID-5 checksumming functions for MMX and SSE. * @@ -881,3 +884,5 @@ do { \ deals with a load to a line that is being prefetched. */ #define XOR_SELECT_TEMPLATE(FASTEST) \ (cpu_has_xmm ? &xor_block_pIII_sse : FASTEST) + +#endif /* ASM_X86__XOR_32_H */ diff --git a/include/asm-x86/xor_64.h b/include/asm-x86/xor_64.h index 24957e3..2d3a18d 100644 --- a/include/asm-x86/xor_64.h +++ b/include/asm-x86/xor_64.h @@ -1,3 +1,6 @@ +#ifndef ASM_X86__XOR_64_H +#define ASM_X86__XOR_64_H + /* * Optimized RAID-5 checksumming functions for MMX and SSE. * @@ -354,3 +357,5 @@ do { \ We may also be able to load into the L1 only depending on how the cpu deals with a load to a line that is being prefetched. */ #define XOR_SELECT_TEMPLATE(FASTEST) (&xor_block_sse) + +#endif /* ASM_X86__XOR_64_H */ diff --git a/include/linux/console.h b/include/linux/console.h index a4f27fb..248e6e3 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -108,6 +108,8 @@ struct console { struct console *next; }; +extern int console_set_on_cmdline; + extern int add_preferred_console(char *name, int idx, char *options); extern int update_console_cmdline(char *name, int idx, char *name_new, int idx_new, char *options); extern void register_console(struct console *); diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index f31debf..0d2a4e7 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -157,6 +157,7 @@ PAGEFLAG(Active, active) __CLEARPAGEFLAG(Active, active) __PAGEFLAG(Slab, slab) PAGEFLAG(Checked, owner_priv_1) /* Used by some filesystems */ PAGEFLAG(Pinned, owner_priv_1) TESTSCFLAG(Pinned, owner_priv_1) /* Xen */ +PAGEFLAG(SavePinned, dirty); /* Xen */ PAGEFLAG(Reserved, reserved) __CLEARPAGEFLAG(Reserved, reserved) PAGEFLAG(Private, private) __CLEARPAGEFLAG(Private, private) __SETPAGEFLAG(Private, private) diff --git a/include/linux/resume-trace.h b/include/linux/resume-trace.h index f3f4f28..c9ba2fd 100644 --- a/include/linux/resume-trace.h +++ b/include/linux/resume-trace.h @@ -8,7 +8,7 @@ extern int pm_trace_enabled; struct device; extern void set_trace_device(struct device *); -extern void generate_resume_trace(void *tracedata, unsigned int user); +extern void generate_resume_trace(const void *tracedata, unsigned int user); #define TRACE_DEVICE(dev) do { \ if (pm_trace_enabled) \ diff --git a/include/xen/events.h b/include/xen/events.h index acd8e06..67c4436 100644 --- a/include/xen/events.h +++ b/include/xen/events.h @@ -32,6 +32,7 @@ void unbind_from_irqhandler(unsigned int irq, void *dev_id); void xen_send_IPI_one(unsigned int cpu, enum ipi_vector vector); int resend_irq_on_evtchn(unsigned int irq); +void rebind_evtchn_irq(int evtchn, int irq); static inline void notify_remote_via_evtchn(int port) { @@ -40,4 +41,7 @@ static inline void notify_remote_via_evtchn(int port) } extern void notify_remote_via_irq(int irq); + +extern void xen_irq_resume(void); + #endif /* _XEN_EVENTS_H */ diff --git a/include/xen/grant_table.h b/include/xen/grant_table.h index 4662048..a40f1cd 100644 --- a/include/xen/grant_table.h +++ b/include/xen/grant_table.h @@ -51,6 +51,9 @@ struct gnttab_free_callback { u16 count; }; +int gnttab_suspend(void); +int gnttab_resume(void); + int gnttab_grant_foreign_access(domid_t domid, unsigned long frame, int readonly); diff --git a/include/xen/hvc-console.h b/include/xen/hvc-console.h index 21c0ecf..98b79bc 100644 --- a/include/xen/hvc-console.h +++ b/include/xen/hvc-console.h @@ -3,4 +3,13 @@ extern struct console xenboot_console; +#ifdef CONFIG_HVC_XEN +void xen_console_resume(void); +#else +static inline void xen_console_resume(void) { } +#endif + +void xen_raw_console_write(const char *str); +void xen_raw_printk(const char *fmt, ...); + #endif /* XEN_HVC_CONSOLE_H */ diff --git a/include/xen/interface/elfnote.h b/include/xen/interface/elfnote.h index a64d3df..7a8262c 100644 --- a/include/xen/interface/elfnote.h +++ b/include/xen/interface/elfnote.h @@ -120,6 +120,26 @@ */ #define XEN_ELFNOTE_BSD_SYMTAB 11 +/* + * The lowest address the hypervisor hole can begin at (numeric). + * + * This must not be set higher than HYPERVISOR_VIRT_START. Its presence + * also indicates to the hypervisor that the kernel can deal with the + * hole starting at a higher address. + */ +#define XEN_ELFNOTE_HV_START_LOW 12 + +/* + * List of maddr_t-sized mask/value pairs describing how to recognize + * (non-present) L1 page table entries carrying valid MFNs (numeric). + */ +#define XEN_ELFNOTE_L1_MFN_VALID 13 + +/* + * Whether or not the guest supports cooperative suspend cancellation. + */ +#define XEN_ELFNOTE_SUSPEND_CANCEL 14 + #endif /* __XEN_PUBLIC_ELFNOTE_H__ */ /* diff --git a/include/xen/interface/features.h b/include/xen/interface/features.h index d73228d..f51b641 100644 --- a/include/xen/interface/features.h +++ b/include/xen/interface/features.h @@ -38,6 +38,9 @@ */ #define XENFEAT_pae_pgdir_above_4gb 4 +/* x86: Does this Xen host support the MMU_PT_UPDATE_PRESERVE_AD hypercall? */ +#define XENFEAT_mmu_pt_update_preserve_ad 5 + #define XENFEAT_NR_SUBMAPS 1 #endif /* __XEN_PUBLIC_FEATURES_H__ */ diff --git a/include/xen/interface/io/fbif.h b/include/xen/interface/io/fbif.h index 5a934dd..974a51e 100644 --- a/include/xen/interface/io/fbif.h +++ b/include/xen/interface/io/fbif.h @@ -49,11 +49,27 @@ struct xenfb_update { int32_t height; /* rect height */ }; +/* + * Framebuffer resize notification event + * Capable backend sets feature-resize in xenstore. + */ +#define XENFB_TYPE_RESIZE 3 + +struct xenfb_resize { + uint8_t type; /* XENFB_TYPE_RESIZE */ + int32_t width; /* width in pixels */ + int32_t height; /* height in pixels */ + int32_t stride; /* stride in bytes */ + int32_t depth; /* depth in bits */ + int32_t offset; /* start offset within framebuffer */ +}; + #define XENFB_OUT_EVENT_SIZE 40 union xenfb_out_event { uint8_t type; struct xenfb_update update; + struct xenfb_resize resize; char pad[XENFB_OUT_EVENT_SIZE]; }; @@ -105,15 +121,18 @@ struct xenfb_page { * Each directory page holds PAGE_SIZE / sizeof(*pd) * framebuffer pages, and can thus map up to PAGE_SIZE * * PAGE_SIZE / sizeof(*pd) bytes. With PAGE_SIZE == 4096 and - * sizeof(unsigned long) == 4, that's 4 Megs. Two directory - * pages should be enough for a while. + * sizeof(unsigned long) == 4/8, that's 4 Megs 32 bit and 2 + * Megs 64 bit. 256 directories give enough room for a 512 + * Meg framebuffer with a max resolution of 12,800x10,240. + * Should be enough for a while with room leftover for + * expansion. */ - unsigned long pd[2]; + unsigned long pd[256]; }; /* - * Wart: xenkbd needs to know resolution. Put it here until a better - * solution is found, but don't leak it to the backend. + * Wart: xenkbd needs to know default resolution. Put it here until a + * better solution is found, but don't leak it to the backend. */ #ifdef __KERNEL__ #define XENFB_WIDTH 800 diff --git a/include/xen/interface/io/kbdif.h b/include/xen/interface/io/kbdif.h index fb97f42..8066c78 100644 --- a/include/xen/interface/io/kbdif.h +++ b/include/xen/interface/io/kbdif.h @@ -49,6 +49,7 @@ struct xenkbd_motion { uint8_t type; /* XENKBD_TYPE_MOTION */ int32_t rel_x; /* relative X motion */ int32_t rel_y; /* relative Y motion */ + int32_t rel_z; /* relative Z motion (wheel) */ }; struct xenkbd_key { @@ -61,6 +62,7 @@ struct xenkbd_position { uint8_t type; /* XENKBD_TYPE_POS */ int32_t abs_x; /* absolute X position (in FB pixels) */ int32_t abs_y; /* absolute Y position (in FB pixels) */ + int32_t rel_z; /* relative Z motion (wheel) */ }; #define XENKBD_IN_EVENT_SIZE 40 diff --git a/include/xen/interface/memory.h b/include/xen/interface/memory.h index da76846..af36ead 100644 --- a/include/xen/interface/memory.h +++ b/include/xen/interface/memory.h @@ -29,7 +29,7 @@ struct xen_memory_reservation { * OUT: GMFN bases of extents that were allocated * (NB. This command also updates the mach_to_phys translation table) */ - ulong extent_start; + GUEST_HANDLE(ulong) extent_start; /* Number of extents, and size/alignment of each (2^extent_order pages). */ unsigned long nr_extents; @@ -50,6 +50,7 @@ struct xen_memory_reservation { domid_t domid; }; +DEFINE_GUEST_HANDLE_STRUCT(xen_memory_reservation); /* * Returns the maximum machine frame number of mapped RAM in this system. @@ -85,7 +86,7 @@ struct xen_machphys_mfn_list { * any large discontiguities in the machine address space, 2MB gaps in * the machphys table will be represented by an MFN base of zero. */ - ulong extent_start; + GUEST_HANDLE(ulong) extent_start; /* * Number of extents written to the above array. This will be smaller @@ -93,6 +94,7 @@ struct xen_machphys_mfn_list { */ unsigned int nr_extents; }; +DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mfn_list); /* * Sets the GPFN at which a particular page appears in the specified guest's @@ -115,6 +117,7 @@ struct xen_add_to_physmap { /* GPFN where the source mapping page should appear. */ unsigned long gpfn; }; +DEFINE_GUEST_HANDLE_STRUCT(xen_add_to_physmap); /* * Translates a list of domain-specific GPFNs into MFNs. Returns a -ve error @@ -129,13 +132,14 @@ struct xen_translate_gpfn_list { unsigned long nr_gpfns; /* List of GPFNs to translate. */ - ulong gpfn_list; + GUEST_HANDLE(ulong) gpfn_list; /* * Output list to contain MFN translations. May be the same as the input * list (in which case each input GPFN is overwritten with the output MFN). */ - ulong mfn_list; + GUEST_HANDLE(ulong) mfn_list; }; +DEFINE_GUEST_HANDLE_STRUCT(xen_translate_gpfn_list); #endif /* __XEN_PUBLIC_MEMORY_H__ */ diff --git a/include/xen/interface/xen.h b/include/xen/interface/xen.h index 819a033..2befa3e 100644 --- a/include/xen/interface/xen.h +++ b/include/xen/interface/xen.h @@ -114,9 +114,14 @@ * ptr[:2] -- Machine address within the frame whose mapping to modify. * The frame must belong to the FD, if one is specified. * val -- Value to write into the mapping entry. + * + * ptr[1:0] == MMU_PT_UPDATE_PRESERVE_AD: + * As MMU_NORMAL_PT_UPDATE above, but A/D bits currently in the PTE are ORed + * with those in @val. */ -#define MMU_NORMAL_PT_UPDATE 0 /* checked '*ptr = val'. ptr is MA. */ -#define MMU_MACHPHYS_UPDATE 1 /* ptr = MA of frame to modify entry for */ +#define MMU_NORMAL_PT_UPDATE 0 /* checked '*ptr = val'. ptr is MA. */ +#define MMU_MACHPHYS_UPDATE 1 /* ptr = MA of frame to modify entry for */ +#define MMU_PT_UPDATE_PRESERVE_AD 2 /* atomically: *ptr = val | (*ptr&(A|D)) */ /* * MMU EXTENDED OPERATIONS diff --git a/include/xen/xen-ops.h b/include/xen/xen-ops.h index 10ddfe0..a706d6a 100644 --- a/include/xen/xen-ops.h +++ b/include/xen/xen-ops.h @@ -5,4 +5,10 @@ DECLARE_PER_CPU(struct vcpu_info *, xen_vcpu); +void xen_pre_suspend(void); +void xen_post_suspend(int suspend_cancelled); + +void xen_mm_pin_all(void); +void xen_mm_unpin_all(void); + #endif /* INCLUDE_XEN_OPS_H */ diff --git a/kernel/printk.c b/kernel/printk.c index 8fb01c3..028ed75 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -121,6 +121,8 @@ struct console_cmdline static struct console_cmdline console_cmdline[MAX_CMDLINECONSOLES]; static int selected_console = -1; static int preferred_console = -1; +int console_set_on_cmdline; +EXPORT_SYMBOL(console_set_on_cmdline); /* Flag: console code may call schedule() */ static int console_may_schedule; @@ -890,6 +892,7 @@ static int __init console_setup(char *str) *s = 0; __add_preferred_console(buf, idx, options, brl_options); + console_set_on_cmdline = 1; return 1; } __setup("console=", console_setup); diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 57a1f02..67f80c2 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -30,6 +30,7 @@ struct tick_device tick_broadcast_device; static cpumask_t tick_broadcast_mask; static DEFINE_SPINLOCK(tick_broadcast_lock); +static int tick_broadcast_force; #ifdef CONFIG_TICK_ONESHOT static void tick_broadcast_clear_oneshot(int cpu); @@ -232,10 +233,11 @@ static void tick_do_broadcast_on_off(void *why) CLOCK_EVT_MODE_SHUTDOWN); } if (*reason == CLOCK_EVT_NOTIFY_BROADCAST_FORCE) - dev->features |= CLOCK_EVT_FEAT_DUMMY; + tick_broadcast_force = 1; break; case CLOCK_EVT_NOTIFY_BROADCAST_OFF: - if (cpu_isset(cpu, tick_broadcast_mask)) { + if (!tick_broadcast_force && + cpu_isset(cpu, tick_broadcast_mask)) { cpu_clear(cpu, tick_broadcast_mask); if (td->mode == TICKDEV_MODE_PERIODIC) tick_setup_periodic(dev, 0); diff --git a/mm/mprotect.c b/mm/mprotect.c index a5bf31c..acfe7c8 100644 --- a/mm/mprotect.c +++ b/mm/mprotect.c @@ -47,19 +47,17 @@ static void change_pte_range(struct mm_struct *mm, pmd_t *pmd, if (pte_present(oldpte)) { pte_t ptent; - /* Avoid an SMP race with hardware updated dirty/clean - * bits by wiping the pte and then setting the new pte - * into place. - */ - ptent = ptep_get_and_clear(mm, addr, pte); + ptent = ptep_modify_prot_start(mm, addr, pte); ptent = pte_modify(ptent, newprot); + /* * Avoid taking write faults for pages we know to be * dirty. */ if (dirty_accountable && pte_dirty(ptent)) ptent = pte_mkwrite(ptent); - set_pte_at(mm, addr, pte, ptent); + + ptep_modify_prot_commit(mm, addr, pte, ptent); #ifdef CONFIG_MIGRATION } else if (!pte_file(oldpte)) { swp_entry_t entry = pte_to_swp_entry(oldpte); |