diff options
| -rw-r--r-- | arch/x86/boot/compressed/misc.c | 13 | ||||
| -rw-r--r-- | arch/x86/include/asm/io.h | 155 | ||||
| -rw-r--r-- | arch/x86/include/asm/io_32.h | 196 | ||||
| -rw-r--r-- | arch/x86/include/asm/io_64.h | 181 | ||||
| -rw-r--r-- | arch/x86/include/asm/numaq.h | 4 | ||||
| -rw-r--r-- | arch/x86/lib/Makefile | 2 | ||||
| -rw-r--r-- | arch/x86/lib/io_64.c | 25 | ||||
| -rw-r--r-- | arch/x86/pci/numaq_32.c | 6 |
8 files changed, 162 insertions, 420 deletions
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index 3b22fe8..88042e8 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -19,11 +19,6 @@ #define _ASM_X86_DESC_H 1 #endif -#ifdef CONFIG_X86_64 -#define _LINUX_STRING_H_ 1 -#define __LINUX_BITMAP_H 1 -#endif - #include <linux/linkage.h> #include <linux/screen_info.h> #include <linux/elf.h> @@ -131,8 +126,8 @@ static void error(char *m); static struct boot_params *real_mode; /* Pointer to real-mode data */ static int quiet; -static void *memset(void *s, int c, unsigned n); -void *memcpy(void *dest, const void *src, unsigned n); +void *memset(void *s, int c, size_t n); +void *memcpy(void *dest, const void *src, size_t n); static void __putstr(int, const char *); #define putstr(__x) __putstr(0, __x) @@ -223,7 +218,7 @@ static void __putstr(int error, const char *s) outb(0xff & (pos >> 1), vidport+1); } -static void *memset(void *s, int c, unsigned n) +void *memset(void *s, int c, size_t n) { int i; char *ss = s; @@ -233,7 +228,7 @@ static void *memset(void *s, int c, unsigned n) return s; } -void *memcpy(void *dest, const void *src, unsigned n) +void *memcpy(void *dest, const void *src, size_t n) { int i; const char *s = src; diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h index 7373932..a1dcfa3 100644 --- a/arch/x86/include/asm/io.h +++ b/arch/x86/include/asm/io.h @@ -1,8 +1,42 @@ #ifndef _ASM_X86_IO_H #define _ASM_X86_IO_H +/* + * This file contains the definitions for the x86 IO instructions + * inb/inw/inl/outb/outw/outl and the "string versions" of the same + * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" + * versions of the single-IO instructions (inb_p/inw_p/..). + * + * This file is not meant to be obfuscating: it's just complicated + * to (a) handle it all in a way that makes gcc able to optimize it + * as well as possible and (b) trying to avoid writing the same thing + * over and over again with slight variations and possibly making a + * mistake somewhere. + */ + +/* + * Thanks to James van Artsdalen for a better timing-fix than + * the two short jumps: using outb's to a nonexistent port seems + * to guarantee better timings even on fast machines. + * + * On the other hand, I'd like to be sure of a non-existent port: + * I feel a bit unsafe about using 0x80 (should be safe, though) + * + * Linus + */ + + /* + * Bit simplified and optimized by Jan Hubicka + * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999. + * + * isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added, + * isa_read[wl] and isa_write[wl] fixed + * - Arnaldo Carvalho de Melo <acme@conectiva.com.br> + */ + #define ARCH_HAS_IOREMAP_WC +#include <linux/string.h> #include <linux/compiler.h> #include <asm-generic/int-ll64.h> #include <asm/page.h> @@ -173,11 +207,126 @@ static inline void __iomem *ioremap(resource_size_t offset, unsigned long size) extern void iounmap(volatile void __iomem *addr); -#ifdef CONFIG_X86_32 -# include "io_32.h" +#ifdef __KERNEL__ + +#include <asm-generic/iomap.h> + +#include <linux/vmalloc.h> + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +static inline void +memset_io(volatile void __iomem *addr, unsigned char val, size_t count) +{ + memset((void __force *)addr, val, count); +} + +static inline void +memcpy_fromio(void *dst, const volatile void __iomem *src, size_t count) +{ + memcpy(dst, (const void __force *)src, count); +} + +static inline void +memcpy_toio(volatile void __iomem *dst, const void *src, size_t count) +{ + memcpy((void __force *)dst, src, count); +} + +/* + * ISA space is 'always mapped' on a typical x86 system, no need to + * explicitly ioremap() it. The fact that the ISA IO space is mapped + * to PAGE_OFFSET is pure coincidence - it does not mean ISA values + * are physical addresses. The following constant pointer can be + * used as the IO-area pointer (it can be iounmapped as well, so the + * analogy with PCI is quite large): + */ +#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET)) + +/* + * Cache management + * + * This needed for two cases + * 1. Out of order aware processors + * 2. Accidentally out of order processors (PPro errata #51) + */ + +static inline void flush_write_buffers(void) +{ +#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE) + asm volatile("lock; addl $0,0(%%esp)": : :"memory"); +#endif +} + +#endif /* __KERNEL__ */ + +extern void native_io_delay(void); + +extern int io_delay_type; +extern void io_delay_init(void); + +#if defined(CONFIG_PARAVIRT) +#include <asm/paravirt.h> #else -# include "io_64.h" + +static inline void slow_down_io(void) +{ + native_io_delay(); +#ifdef REALLY_SLOW_IO + native_io_delay(); + native_io_delay(); + native_io_delay(); #endif +} + +#endif + +#define BUILDIO(bwl, bw, type) \ +static inline void out##bwl(unsigned type value, int port) \ +{ \ + asm volatile("out" #bwl " %" #bw "0, %w1" \ + : : "a"(value), "Nd"(port)); \ +} \ + \ +static inline unsigned type in##bwl(int port) \ +{ \ + unsigned type value; \ + asm volatile("in" #bwl " %w1, %" #bw "0" \ + : "=a"(value) : "Nd"(port)); \ + return value; \ +} \ + \ +static inline void out##bwl##_p(unsigned type value, int port) \ +{ \ + out##bwl(value, port); \ + slow_down_io(); \ +} \ + \ +static inline unsigned type in##bwl##_p(int port) \ +{ \ + unsigned type value = in##bwl(port); \ + slow_down_io(); \ + return value; \ +} \ + \ +static inline void outs##bwl(int port, const void *addr, unsigned long count) \ +{ \ + asm volatile("rep; outs" #bwl \ + : "+S"(addr), "+c"(count) : "d"(port)); \ +} \ + \ +static inline void ins##bwl(int port, void *addr, unsigned long count) \ +{ \ + asm volatile("rep; ins" #bwl \ + : "+D"(addr), "+c"(count) : "d"(port)); \ +} + +BUILDIO(b, b, char) +BUILDIO(w, w, short) +BUILDIO(l, , int) extern void *xlate_dev_mem_ptr(unsigned long phys); extern void unxlate_dev_mem_ptr(unsigned long phys, void *addr); diff --git a/arch/x86/include/asm/io_32.h b/arch/x86/include/asm/io_32.h deleted file mode 100644 index a299900..0000000 --- a/arch/x86/include/asm/io_32.h +++ /dev/null @@ -1,196 +0,0 @@ -#ifndef _ASM_X86_IO_32_H -#define _ASM_X86_IO_32_H - -#include <linux/string.h> -#include <linux/compiler.h> - -/* - * This file contains the definitions for the x86 IO instructions - * inb/inw/inl/outb/outw/outl and the "string versions" of the same - * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" - * versions of the single-IO instructions (inb_p/inw_p/..). - * - * This file is not meant to be obfuscating: it's just complicated - * to (a) handle it all in a way that makes gcc able to optimize it - * as well as possible and (b) trying to avoid writing the same thing - * over and over again with slight variations and possibly making a - * mistake somewhere. - */ - -/* - * Thanks to James van Artsdalen for a better timing-fix than - * the two short jumps: using outb's to a nonexistent port seems - * to guarantee better timings even on fast machines. - * - * On the other hand, I'd like to be sure of a non-existent port: - * I feel a bit unsafe about using 0x80 (should be safe, though) - * - * Linus - */ - - /* - * Bit simplified and optimized by Jan Hubicka - * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999. - * - * isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added, - * isa_read[wl] and isa_write[wl] fixed - * - Arnaldo Carvalho de Melo <acme@conectiva.com.br> - */ - -#define XQUAD_PORTIO_BASE 0xfe400000 -#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */ - -#ifdef __KERNEL__ - -#include <asm-generic/iomap.h> - -#include <linux/vmalloc.h> - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -static inline void -memset_io(volatile void __iomem *addr, unsigned char val, int count) -{ - memset((void __force *)addr, val, count); -} - -static inline void -memcpy_fromio(void *dst, const volatile void __iomem *src, int count) -{ - __memcpy(dst, (const void __force *)src, count); -} - -static inline void -memcpy_toio(volatile void __iomem *dst, const void *src, int count) -{ - __memcpy((void __force *)dst, src, count); -} - -/* - * ISA space is 'always mapped' on a typical x86 system, no need to - * explicitly ioremap() it. The fact that the ISA IO space is mapped - * to PAGE_OFFSET is pure coincidence - it does not mean ISA values - * are physical addresses. The following constant pointer can be - * used as the IO-area pointer (it can be iounmapped as well, so the - * analogy with PCI is quite large): - */ -#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET)) - -/* - * Cache management - * - * This needed for two cases - * 1. Out of order aware processors - * 2. Accidentally out of order processors (PPro errata #51) - */ - -#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE) - -static inline void flush_write_buffers(void) -{ - asm volatile("lock; addl $0,0(%%esp)": : :"memory"); -} - -#else - -#define flush_write_buffers() do { } while (0) - -#endif - -#endif /* __KERNEL__ */ - -extern void native_io_delay(void); - -extern int io_delay_type; -extern void io_delay_init(void); - -#if defined(CONFIG_PARAVIRT) -#include <asm/paravirt.h> -#else - -static inline void slow_down_io(void) -{ - native_io_delay(); -#ifdef REALLY_SLOW_IO - native_io_delay(); - native_io_delay(); - native_io_delay(); -#endif -} - -#endif - -#define __BUILDIO(bwl, bw, type) \ -static inline void out##bwl(unsigned type value, int port) \ -{ \ - out##bwl##_local(value, port); \ -} \ - \ -static inline unsigned type in##bwl(int port) \ -{ \ - return in##bwl##_local(port); \ -} - -#define BUILDIO(bwl, bw, type) \ -static inline void out##bwl##_local(unsigned type value, int port) \ -{ \ - asm volatile("out" #bwl " %" #bw "0, %w1" \ - : : "a"(value), "Nd"(port)); \ -} \ - \ -static inline unsigned type in##bwl##_local(int port) \ -{ \ - unsigned type value; \ - asm volatile("in" #bwl " %w1, %" #bw "0" \ - : "=a"(value) : "Nd"(port)); \ - return value; \ -} \ - \ -static inline void out##bwl##_local_p(unsigned type value, int port) \ -{ \ - out##bwl##_local(value, port); \ - slow_down_io(); \ -} \ - \ -static inline unsigned type in##bwl##_local_p(int port) \ -{ \ - unsigned type value = in##bwl##_local(port); \ - slow_down_io(); \ - return value; \ -} \ - \ -__BUILDIO(bwl, bw, type) \ - \ -static inline void out##bwl##_p(unsigned type value, int port) \ -{ \ - out##bwl(value, port); \ - slow_down_io(); \ -} \ - \ -static inline unsigned type in##bwl##_p(int port) \ -{ \ - unsigned type value = in##bwl(port); \ - slow_down_io(); \ - return value; \ -} \ - \ -static inline void outs##bwl(int port, const void *addr, unsigned long count) \ -{ \ - asm volatile("rep; outs" #bwl \ - : "+S"(addr), "+c"(count) : "d"(port)); \ -} \ - \ -static inline void ins##bwl(int port, void *addr, unsigned long count) \ -{ \ - asm volatile("rep; ins" #bwl \ - : "+D"(addr), "+c"(count) : "d"(port)); \ -} - -BUILDIO(b, b, char) -BUILDIO(w, w, short) -BUILDIO(l, , int) - -#endif /* _ASM_X86_IO_32_H */ diff --git a/arch/x86/include/asm/io_64.h b/arch/x86/include/asm/io_64.h deleted file mode 100644 index 2440678..0000000 --- a/arch/x86/include/asm/io_64.h +++ /dev/null @@ -1,181 +0,0 @@ -#ifndef _ASM_X86_IO_64_H -#define _ASM_X86_IO_64_H - - -/* - * This file contains the definitions for the x86 IO instructions - * inb/inw/inl/outb/outw/outl and the "string versions" of the same - * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" - * versions of the single-IO instructions (inb_p/inw_p/..). - * - * This file is not meant to be obfuscating: it's just complicated - * to (a) handle it all in a way that makes gcc able to optimize it - * as well as possible and (b) trying to avoid writing the same thing - * over and over again with slight variations and possibly making a - * mistake somewhere. - */ - -/* - * Thanks to James van Artsdalen for a better timing-fix than - * the two short jumps: using outb's to a nonexistent port seems - * to guarantee better timings even on fast machines. - * - * On the other hand, I'd like to be sure of a non-existent port: - * I feel a bit unsafe about using 0x80 (should be safe, though) - * - * Linus - */ - - /* - * Bit simplified and optimized by Jan Hubicka - * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999. - * - * isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added, - * isa_read[wl] and isa_write[wl] fixed - * - Arnaldo Carvalho de Melo <acme@conectiva.com.br> - */ - -extern void native_io_delay(void); - -extern int io_delay_type; -extern void io_delay_init(void); - -#if defined(CONFIG_PARAVIRT) -#include <asm/paravirt.h> -#else - -static inline void slow_down_io(void) -{ - native_io_delay(); -#ifdef REALLY_SLOW_IO - native_io_delay(); - native_io_delay(); - native_io_delay(); -#endif -} -#endif - -/* - * Talk about misusing macros.. - */ -#define __OUT1(s, x) \ -static inline void out##s(unsigned x value, unsigned short port) { - -#define __OUT2(s, s1, s2) \ -asm volatile ("out" #s " %" s1 "0,%" s2 "1" - -#ifndef REALLY_SLOW_IO -#define REALLY_SLOW_IO -#define UNSET_REALLY_SLOW_IO -#endif - -#define __OUT(s, s1, x) \ - __OUT1(s, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port)); \ - } \ - __OUT1(s##_p, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port)); \ - slow_down_io(); \ -} - -#define __IN1(s) \ -static inline RETURN_TYPE in##s(unsigned short port) \ -{ \ - RETURN_TYPE _v; - -#define __IN2(s, s1, s2) \ - asm volatile ("in" #s " %" s2 "1,%" s1 "0" - -#define __IN(s, s1, i...) \ - __IN1(s) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i); \ - return _v; \ - } \ - __IN1(s##_p) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i); \ - slow_down_io(); \ - return _v; } - -#ifdef UNSET_REALLY_SLOW_IO -#undef REALLY_SLOW_IO -#endif - -#define __INS(s) \ -static inline void ins##s(unsigned short port, void *addr, \ - unsigned long count) \ -{ \ - asm volatile ("rep ; ins" #s \ - : "=D" (addr), "=c" (count) \ - : "d" (port), "0" (addr), "1" (count)); \ -} - -#define __OUTS(s) \ -static inline void outs##s(unsigned short port, const void *addr, \ - unsigned long count) \ -{ \ - asm volatile ("rep ; outs" #s \ - : "=S" (addr), "=c" (count) \ - : "d" (port), "0" (addr), "1" (count)); \ -} - -#define RETURN_TYPE unsigned char -__IN(b, "") -#undef RETURN_TYPE -#define RETURN_TYPE unsigned short -__IN(w, "") -#undef RETURN_TYPE -#define RETURN_TYPE unsigned int -__IN(l, "") -#undef RETURN_TYPE - -__OUT(b, "b", char) -__OUT(w, "w", short) -__OUT(l, , int) - -__INS(b) -__INS(w) -__INS(l) - -__OUTS(b) -__OUTS(w) -__OUTS(l) - -#if defined(__KERNEL__) && defined(__x86_64__) - -#include <linux/vmalloc.h> - -#include <asm-generic/iomap.h> - -void __memcpy_fromio(void *, unsigned long, unsigned); -void __memcpy_toio(unsigned long, const void *, unsigned); - -static inline void memcpy_fromio(void *to, const volatile void __iomem *from, - unsigned len) -{ - __memcpy_fromio(to, (unsigned long)from, len); -} - -static inline void memcpy_toio(volatile void __iomem *to, const void *from, - unsigned len) -{ - __memcpy_toio((unsigned long)to, from, len); -} - -void memset_io(volatile void __iomem *a, int b, size_t c); - -/* - * ISA space is 'always mapped' on a typical x86 system, no need to - * explicitly ioremap() it. The fact that the ISA IO space is mapped - * to PAGE_OFFSET is pure coincidence - it does not mean ISA values - * are physical addresses. The following constant pointer can be - * used as the IO-area pointer (it can be iounmapped as well, so the - * analogy with PCI is quite large): - */ -#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET)) - -#define flush_write_buffers() - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -#endif /* __KERNEL__ */ - -#endif /* _ASM_X86_IO_64_H */ diff --git a/arch/x86/include/asm/numaq.h b/arch/x86/include/asm/numaq.h index 9f0a5f5..13370b9 100644 --- a/arch/x86/include/asm/numaq.h +++ b/arch/x86/include/asm/numaq.h @@ -33,6 +33,10 @@ extern int get_memcfg_numaq(void); extern void *xquad_portio; +#define XQUAD_PORTIO_BASE 0xfe400000 +#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */ +#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port) + /* * SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are the */ diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index d85e0e4..710cc14 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -34,7 +34,7 @@ ifneq ($(CONFIG_X86_CMPXCHG64),y) endif lib-$(CONFIG_X86_USE_3DNOW) += mmx_32.o else - obj-y += io_64.o iomap_copy_64.o + obj-y += iomap_copy_64.o lib-y += csum-partial_64.o csum-copy_64.o csum-wrappers_64.o lib-y += thunk_64.o clear_page_64.o copy_page_64.o lib-y += memmove_64.o memset_64.o diff --git a/arch/x86/lib/io_64.c b/arch/x86/lib/io_64.c deleted file mode 100644 index 3f1eb59..0000000 --- a/arch/x86/lib/io_64.c +++ /dev/null @@ -1,25 +0,0 @@ -#include <linux/string.h> -#include <linux/module.h> -#include <asm/io.h> - -void __memcpy_toio(unsigned long dst, const void *src, unsigned len) -{ - __inline_memcpy((void *)dst, src, len); -} -EXPORT_SYMBOL(__memcpy_toio); - -void __memcpy_fromio(void *dst, unsigned long src, unsigned len) -{ - __inline_memcpy(dst, (const void *)src, len); -} -EXPORT_SYMBOL(__memcpy_fromio); - -void memset_io(volatile void __iomem *a, int b, size_t c) -{ - /* - * TODO: memset can mangle the IO patterns quite a bit. - * perhaps it would be better to use a dumb one: - */ - memset((void *)a, b, c); -} -EXPORT_SYMBOL(memset_io); diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c index 8eb295e..8884a1c 100644 --- a/arch/x86/pci/numaq_32.c +++ b/arch/x86/pci/numaq_32.c @@ -8,9 +8,7 @@ #include <asm/apic.h> #include <asm/mpspec.h> #include <asm/pci_x86.h> - -#define XQUAD_PORTIO_BASE 0xfe400000 -#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */ +#include <asm/numaq.h> #define BUS2QUAD(global) (mp_bus_id_to_node[global]) @@ -18,8 +16,6 @@ #define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local]) -#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port) - #define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \ (0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3)) |