diff options
-rw-r--r-- | arch/x86/kernel/i8259_64.c | 154 |
1 files changed, 81 insertions, 73 deletions
diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c index ba6d572..be82b12 100644 --- a/arch/x86/kernel/i8259_64.c +++ b/arch/x86/kernel/i8259_64.c @@ -21,6 +21,7 @@ #include <asm/delay.h> #include <asm/desc.h> #include <asm/apic.h> +#include <asm/i8259.h> /* * Common place to define all x86 IRQ vectors @@ -48,7 +49,7 @@ */ /* - * The IO-APIC gives us many more interrupt sources. Most of these + * The IO-APIC gives us many more interrupt sources. Most of these * are unused but an SMP system is supposed to have enough memory ... * sometimes (mostly wrt. hw bugs) we get corrupted vectors all * across the spectrum, so we really want to be prepared to get all @@ -114,11 +115,7 @@ static struct irq_chip i8259A_chip = { /* * This contains the irq mask for both 8259A irq controllers, */ -static unsigned int cached_irq_mask = 0xffff; - -#define __byte(x,y) (((unsigned char *)&(y))[x]) -#define cached_21 (__byte(0,cached_irq_mask)) -#define cached_A1 (__byte(1,cached_irq_mask)) +unsigned int cached_irq_mask = 0xffff; /* * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) @@ -139,9 +136,9 @@ void disable_8259A_irq(unsigned int irq) spin_lock_irqsave(&i8259A_lock, flags); cached_irq_mask |= mask; if (irq & 8) - outb(cached_A1,0xA1); + outb(cached_slave_mask, PIC_SLAVE_IMR); else - outb(cached_21,0x21); + outb(cached_master_mask, PIC_MASTER_IMR); spin_unlock_irqrestore(&i8259A_lock, flags); } @@ -153,9 +150,9 @@ void enable_8259A_irq(unsigned int irq) spin_lock_irqsave(&i8259A_lock, flags); cached_irq_mask &= mask; if (irq & 8) - outb(cached_A1,0xA1); + outb(cached_slave_mask, PIC_SLAVE_IMR); else - outb(cached_21,0x21); + outb(cached_master_mask, PIC_MASTER_IMR); spin_unlock_irqrestore(&i8259A_lock, flags); } @@ -167,9 +164,9 @@ int i8259A_irq_pending(unsigned int irq) spin_lock_irqsave(&i8259A_lock, flags); if (irq < 8) - ret = inb(0x20) & mask; + ret = inb(PIC_MASTER_CMD) & mask; else - ret = inb(0xA0) & (mask >> 8); + ret = inb(PIC_SLAVE_CMD) & (mask >> 8); spin_unlock_irqrestore(&i8259A_lock, flags); return ret; @@ -196,14 +193,14 @@ static inline int i8259A_irq_real(unsigned int irq) int irqmask = 1<<irq; if (irq < 8) { - outb(0x0B,0x20); /* ISR register */ - value = inb(0x20) & irqmask; - outb(0x0A,0x20); /* back to the IRR register */ + outb(0x0B,PIC_MASTER_CMD); /* ISR register */ + value = inb(PIC_MASTER_CMD) & irqmask; + outb(0x0A,PIC_MASTER_CMD); /* back to the IRR register */ return value; } - outb(0x0B,0xA0); /* ISR register */ - value = inb(0xA0) & (irqmask >> 8); - outb(0x0A,0xA0); /* back to the IRR register */ + outb(0x0B,PIC_SLAVE_CMD); /* ISR register */ + value = inb(PIC_SLAVE_CMD) & (irqmask >> 8); + outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ return value; } @@ -240,14 +237,17 @@ static void mask_and_ack_8259A(unsigned int irq) handle_real_irq: if (irq & 8) { - inb(0xA1); /* DUMMY - (do we need this?) */ - outb(cached_A1,0xA1); - outb(0x60+(irq&7),0xA0);/* 'Specific EOI' to slave */ - outb(0x62,0x20); /* 'Specific EOI' to master-IRQ2 */ + inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ + outb(cached_slave_mask, PIC_SLAVE_IMR); + /* 'Specific EOI' to slave */ + outb(0x60+(irq&7),PIC_SLAVE_CMD); + /* 'Specific EOI' to master-IRQ2 */ + outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); } else { - inb(0x21); /* DUMMY - (do we need this?) */ - outb(cached_21,0x21); - outb(0x60+irq,0x20); /* 'Specific EOI' to master */ + inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ + outb(cached_master_mask, PIC_MASTER_IMR); + /* 'Specific EOI' to master */ + outb(0x60+irq,PIC_MASTER_CMD); } spin_unlock_irqrestore(&i8259A_lock, flags); return; @@ -270,7 +270,8 @@ spurious_8259A_irq: * lets ACK and report it. [once per IRQ] */ if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); + printk(KERN_DEBUG + "spurious 8259A interrupt: IRQ%d.\n", irq); spurious_irq_mask |= irqmask; } atomic_inc(&irq_err_count); @@ -283,51 +284,6 @@ spurious_8259A_irq: } } -void init_8259A(int auto_eoi) -{ - unsigned long flags; - - i8259A_auto_eoi = auto_eoi; - - spin_lock_irqsave(&i8259A_lock, flags); - - outb(0xff, 0x21); /* mask all of 8259A-1 */ - outb(0xff, 0xA1); /* mask all of 8259A-2 */ - - /* - * outb_p - this has to work on a wide range of PC hardware. - */ - outb_p(0x11, 0x20); /* ICW1: select 8259A-1 init */ - outb_p(IRQ0_VECTOR, 0x21); /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ - outb_p(0x04, 0x21); /* 8259A-1 (the master) has a slave on IR2 */ - if (auto_eoi) - outb_p(0x03, 0x21); /* master does Auto EOI */ - else - outb_p(0x01, 0x21); /* master expects normal EOI */ - - outb_p(0x11, 0xA0); /* ICW1: select 8259A-2 init */ - outb_p(IRQ8_VECTOR, 0xA1); /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ - outb_p(0x02, 0xA1); /* 8259A-2 is a slave on master's IR2 */ - outb_p(0x01, 0xA1); /* (slave's support for AEOI in flat mode - is to be investigated) */ - - if (auto_eoi) - /* - * in AEOI mode we just have to mask the interrupt - * when acking. - */ - i8259A_chip.mask_ack = disable_8259A_irq; - else - i8259A_chip.mask_ack = mask_and_ack_8259A; - - udelay(100); /* wait for 8259A to initialize */ - - outb(cached_21, 0x21); /* restore master IRQ mask */ - outb(cached_A1, 0xA1); /* restore slave IRQ mask */ - - spin_unlock_irqrestore(&i8259A_lock, flags); -} - static char irq_trigger[2]; /** * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ @@ -364,8 +320,8 @@ static int i8259A_shutdown(struct sys_device *dev) * the kernel initialization code can get it * out of. */ - outb(0xff, 0x21); /* mask all of 8259A-1 */ - outb(0xff, 0xA1); /* mask all of 8259A-1 */ + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ return 0; } @@ -391,6 +347,58 @@ static int __init i8259A_init_sysfs(void) device_initcall(i8259A_init_sysfs); +void init_8259A(int auto_eoi) +{ + unsigned long flags; + + i8259A_auto_eoi = auto_eoi; + + spin_lock_irqsave(&i8259A_lock, flags); + + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ + + /* + * outb_p - this has to work on a wide range of PC hardware. + */ + outb_p(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ + /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ + outb_p(IRQ0_VECTOR, PIC_MASTER_IMR); + /* 8259A-1 (the master) has a slave on IR2 */ + outb_p(0x04, PIC_MASTER_IMR); + if (auto_eoi) /* master does Auto EOI */ + outb_p(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); + else /* master expects normal EOI */ + outb_p(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); + + outb_p(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ + /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ + outb_p(IRQ8_VECTOR, PIC_SLAVE_IMR); + /* 8259A-2 is a slave on master's IR2 */ + outb_p(PIC_CASCADE_IR, PIC_SLAVE_IMR); + /* (slave's support for AEOI in flat mode is to be investigated) */ + outb_p(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); + + if (auto_eoi) + /* + * In AEOI mode we just have to mask the interrupt + * when acking. + */ + i8259A_chip.mask_ack = disable_8259A_irq; + else + i8259A_chip.mask_ack = mask_and_ack_8259A; + + udelay(100); /* wait for 8259A to initialize */ + + outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ + outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ + + spin_unlock_irqrestore(&i8259A_lock, flags); +} + + + + /* * IRQ2 is cascade interrupt to second interrupt controller */ |