aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/kernel-parameters.txt7
-rw-r--r--arch/x86/Kconfig18
-rw-r--r--arch/x86/kernel/Makefile2
-rw-r--r--arch/x86/kernel/olpc.c260
-rw-r--r--arch/x86/pci/Makefile_321
-rw-r--r--arch/x86/pci/init.c3
-rw-r--r--arch/x86/pci/olpc.c313
-rw-r--r--arch/x86/pci/pci.h1
-rw-r--r--drivers/power/olpc_battery.c2
-rw-r--r--include/asm-x86/olpc.h132
10 files changed, 736 insertions, 3 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e5f3d91..5afc21b2 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1389,6 +1389,13 @@ and is between 256 and 4096 characters. It is defined in the file
nr_uarts= [SERIAL] maximum number of UARTs to be registered.
+ olpc_ec_timeout= [OLPC] ms delay when issuing EC commands
+ Rather than timing out after 20 ms if an EC
+ command is not properly ACKed, override the length
+ of the timeout. We have interrupts disabled while
+ waiting for the ACK, so if this is set too high
+ interrupts *may* be lost!
+
opl3= [HW,OSS]
Format: <io>
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 1d9d874..f70e3e3 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1504,6 +1504,10 @@ config PCI_GODIRECT
config PCI_GOANY
bool "Any"
+config PCI_GOOLPC
+ bool "OLPC"
+ depends on OLPC
+
endchoice
config PCI_BIOS
@@ -1513,12 +1517,17 @@ config PCI_BIOS
# x86-64 doesn't support PCI BIOS access from long mode so always go direct.
config PCI_DIRECT
def_bool y
- depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY) || X86_VISWS)
+ depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC) || X86_VISWS)
config PCI_MMCONFIG
def_bool y
depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
+config PCI_OLPC
+ bool
+ depends on PCI && PCI_GOOLPC
+ default y
+
config PCI_DOMAINS
def_bool y
depends on PCI
@@ -1638,6 +1647,13 @@ config GEODE_MFGPT_TIMER
MFGPTs have a better resolution and max interval than the
generic PIT, and are suitable for use as high-res timers.
+config OLPC
+ bool "One Laptop Per Child support"
+ default n
+ help
+ Add support for detecting the unique features of the OLPC
+ XO hardware.
+
endif # X86_32
config K8_NB
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index fa19c38..350eb1b 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -91,6 +91,8 @@ endif
obj-$(CONFIG_SCx200) += scx200.o
scx200-y += scx200_32.o
+obj-$(CONFIG_OLPC) += olpc.o
+
###
# 64 bit specific files
ifeq ($(CONFIG_X86_64),y)
diff --git a/arch/x86/kernel/olpc.c b/arch/x86/kernel/olpc.c
new file mode 100644
index 0000000..3e66722
--- /dev/null
+++ b/arch/x86/kernel/olpc.c
@@ -0,0 +1,260 @@
+/*
+ * Support for the OLPC DCON and OLPC EC access
+ *
+ * Copyright © 2006 Advanced Micro Devices, Inc.
+ * Copyright © 2007-2008 Andres Salomon <dilinger@debian.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include <asm/geode.h>
+#include <asm/olpc.h>
+
+#ifdef CONFIG_OPEN_FIRMWARE
+#include <asm/ofw.h>
+#endif
+
+struct olpc_platform_t olpc_platform_info;
+EXPORT_SYMBOL_GPL(olpc_platform_info);
+
+static DEFINE_SPINLOCK(ec_lock);
+
+/* what the timeout *should* be (in ms) */
+#define EC_BASE_TIMEOUT 20
+
+/* the timeout that bugs in the EC might force us to actually use */
+static int ec_timeout = EC_BASE_TIMEOUT;
+
+static int __init olpc_ec_timeout_set(char *str)
+{
+ if (get_option(&str, &ec_timeout) != 1) {
+ ec_timeout = EC_BASE_TIMEOUT;
+ printk(KERN_ERR "olpc-ec: invalid argument to "
+ "'olpc_ec_timeout=', ignoring!\n");
+ }
+ printk(KERN_DEBUG "olpc-ec: using %d ms delay for EC commands.\n",
+ ec_timeout);
+ return 1;
+}
+__setup("olpc_ec_timeout=", olpc_ec_timeout_set);
+
+/*
+ * These {i,o}bf_status functions return whether the buffers are full or not.
+ */
+
+static inline unsigned int ibf_status(unsigned int port)
+{
+ return !!(inb(port) & 0x02);
+}
+
+static inline unsigned int obf_status(unsigned int port)
+{
+ return inb(port) & 0x01;
+}
+
+#define wait_on_ibf(p, d) __wait_on_ibf(__LINE__, (p), (d))
+static int __wait_on_ibf(unsigned int line, unsigned int port, int desired)
+{
+ unsigned int timeo;
+ int state = ibf_status(port);
+
+ for (timeo = ec_timeout; state != desired && timeo; timeo--) {
+ mdelay(1);
+ state = ibf_status(port);
+ }
+
+ if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) &&
+ timeo < (ec_timeout - EC_BASE_TIMEOUT)) {
+ printk(KERN_WARNING "olpc-ec: %d: waited %u ms for IBF!\n",
+ line, ec_timeout - timeo);
+ }
+
+ return !(state == desired);
+}
+
+#define wait_on_obf(p, d) __wait_on_obf(__LINE__, (p), (d))
+static int __wait_on_obf(unsigned int line, unsigned int port, int desired)
+{
+ unsigned int timeo;
+ int state = obf_status(port);
+
+ for (timeo = ec_timeout; state != desired && timeo; timeo--) {
+ mdelay(1);
+ state = obf_status(port);
+ }
+
+ if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) &&
+ timeo < (ec_timeout - EC_BASE_TIMEOUT)) {
+ printk(KERN_WARNING "olpc-ec: %d: waited %u ms for OBF!\n",
+ line, ec_timeout - timeo);
+ }
+
+ return !(state == desired);
+}
+
+/*
+ * This allows the kernel to run Embedded Controller commands. The EC is
+ * documented at <http://wiki.laptop.org/go/Embedded_controller>, and the
+ * available EC commands are here:
+ * <http://wiki.laptop.org/go/Ec_specification>. Unfortunately, while
+ * OpenFirmware's source is available, the EC's is not.
+ */
+int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
+ unsigned char *outbuf, size_t outlen)
+{
+ unsigned long flags;
+ int ret = -EIO;
+ int i;
+
+ spin_lock_irqsave(&ec_lock, flags);
+
+ /* Clear OBF */
+ for (i = 0; i < 10 && (obf_status(0x6c) == 1); i++)
+ inb(0x68);
+ if (i == 10) {
+ printk(KERN_ERR "olpc-ec: timeout while attempting to "
+ "clear OBF flag!\n");
+ goto err;
+ }
+
+ if (wait_on_ibf(0x6c, 0)) {
+ printk(KERN_ERR "olpc-ec: timeout waiting for EC to "
+ "quiesce!\n");
+ goto err;
+ }
+
+restart:
+ /*
+ * Note that if we time out during any IBF checks, that's a failure;
+ * we have to return. There's no way for the kernel to clear that.
+ *
+ * If we time out during an OBF check, we can restart the command;
+ * reissuing it will clear the OBF flag, and we should be alright.
+ * The OBF flag will sometimes misbehave due to what we believe
+ * is a hardware quirk..
+ */
+ printk(KERN_DEBUG "olpc-ec: running cmd 0x%x\n", cmd);
+ outb(cmd, 0x6c);
+
+ if (wait_on_ibf(0x6c, 0)) {
+ printk(KERN_ERR "olpc-ec: timeout waiting for EC to read "
+ "command!\n");
+ goto err;
+ }
+
+ if (inbuf && inlen) {
+ /* write data to EC */
+ for (i = 0; i < inlen; i++) {
+ if (wait_on_ibf(0x6c, 0)) {
+ printk(KERN_ERR "olpc-ec: timeout waiting for"
+ " EC accept data!\n");
+ goto err;
+ }
+ printk(KERN_DEBUG "olpc-ec: sending cmd arg 0x%x\n",
+ inbuf[i]);
+ outb(inbuf[i], 0x68);
+ }
+ }
+ if (outbuf && outlen) {
+ /* read data from EC */
+ for (i = 0; i < outlen; i++) {
+ if (wait_on_obf(0x6c, 1)) {
+ printk(KERN_ERR "olpc-ec: timeout waiting for"
+ " EC to provide data!\n");
+ goto restart;
+ }
+ outbuf[i] = inb(0x68);
+ printk(KERN_DEBUG "olpc-ec: received 0x%x\n",
+ outbuf[i]);
+ }
+ }
+
+ ret = 0;
+err:
+ spin_unlock_irqrestore(&ec_lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(olpc_ec_cmd);
+
+#ifdef CONFIG_OPEN_FIRMWARE
+static void __init platform_detect(void)
+{
+ size_t propsize;
+ u32 rev;
+
+ if (ofw("getprop", 4, 1, NULL, "board-revision-int", &rev, 4,
+ &propsize) || propsize != 4) {
+ printk(KERN_ERR "ofw: getprop call failed!\n");
+ rev = 0;
+ }
+ olpc_platform_info.boardrev = be32_to_cpu(rev);
+}
+#else
+static void __init platform_detect(void)
+{
+ /* stopgap until OFW support is added to the kernel */
+ olpc_platform_info.boardrev = be32_to_cpu(0xc2);
+}
+#endif
+
+static int __init olpc_init(void)
+{
+ unsigned char *romsig;
+
+ /* The ioremap check is dangerous; limit what we run it on */
+ if (!is_geode() || geode_has_vsa2())
+ return 0;
+
+ spin_lock_init(&ec_lock);
+
+ romsig = ioremap(0xffffffc0, 16);
+ if (!romsig)
+ return 0;
+
+ if (strncmp(romsig, "CL1 Q", 7))
+ goto unmap;
+ if (strncmp(romsig+6, romsig+13, 3)) {
+ printk(KERN_INFO "OLPC BIOS signature looks invalid. "
+ "Assuming not OLPC\n");
+ goto unmap;
+ }
+
+ printk(KERN_INFO "OLPC board with OpenFirmware %.16s\n", romsig);
+ olpc_platform_info.flags |= OLPC_F_PRESENT;
+
+ /* get the platform revision */
+ platform_detect();
+
+ /* assume B1 and above models always have a DCON */
+ if (olpc_board_at_least(olpc_board(0xb1)))
+ olpc_platform_info.flags |= OLPC_F_DCON;
+
+ /* get the EC revision */
+ olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0,
+ (unsigned char *) &olpc_platform_info.ecver, 1);
+
+ /* check to see if the VSA exists */
+ if (geode_has_vsa2())
+ olpc_platform_info.flags |= OLPC_F_VSA;
+
+ printk(KERN_INFO "OLPC board revision %s%X (EC=%x)\n",
+ ((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "",
+ olpc_platform_info.boardrev >> 4,
+ olpc_platform_info.ecver);
+
+unmap:
+ iounmap(romsig);
+ return 0;
+}
+
+postcore_initcall(olpc_init);
diff --git a/arch/x86/pci/Makefile_32 b/arch/x86/pci/Makefile_32
index cdd6828..b859047 100644
--- a/arch/x86/pci/Makefile_32
+++ b/arch/x86/pci/Makefile_32
@@ -3,6 +3,7 @@ obj-y := i386.o init.o
obj-$(CONFIG_PCI_BIOS) += pcbios.o
obj-$(CONFIG_PCI_MMCONFIG) += mmconfig_32.o direct.o mmconfig-shared.o
obj-$(CONFIG_PCI_DIRECT) += direct.o
+obj-$(CONFIG_PCI_OLPC) += olpc.o
pci-y := fixup.o
pci-$(CONFIG_ACPI) += acpi.o
diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c
index 3de9f9b..0f5f7dd 100644
--- a/arch/x86/pci/init.c
+++ b/arch/x86/pci/init.c
@@ -14,6 +14,9 @@ static __init int pci_access_init(void)
#ifdef CONFIG_PCI_MMCONFIG
pci_mmcfg_init(type);
#endif
+#ifdef CONFIG_PCI_OLPC
+ pci_olpc_init();
+#endif
if (raw_pci_ops)
return 0;
#ifdef CONFIG_PCI_BIOS
diff --git a/arch/x86/pci/olpc.c b/arch/x86/pci/olpc.c
new file mode 100644
index 0000000..5e76365
--- /dev/null
+++ b/arch/x86/pci/olpc.c
@@ -0,0 +1,313 @@
+/*
+ * Low-level PCI config space access for OLPC systems who lack the VSA
+ * PCI virtualization software.
+ *
+ * Copyright © 2006 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The AMD Geode chipset (ie: GX2 processor, cs5536 I/O companion device)
+ * has some I/O functions (display, southbridge, sound, USB HCIs, etc)
+ * that more or less behave like PCI devices, but the hardware doesn't
+ * directly implement the PCI configuration space headers. AMD provides
+ * "VSA" (Virtual System Architecture) software that emulates PCI config
+ * space for these devices, by trapping I/O accesses to PCI config register
+ * (CF8/CFC) and running some code in System Management Mode interrupt state.
+ * On the OLPC platform, we don't want to use that VSA code because
+ * (a) it slows down suspend/resume, and (b) recompiling it requires special
+ * compilers that are hard to get. So instead of letting the complex VSA
+ * code simulate the PCI config registers for the on-chip devices, we
+ * just simulate them the easy way, by inserting the code into the
+ * pci_write_config and pci_read_config path. Most of the config registers
+ * are read-only anyway, so the bulk of the simulation is just table lookup.
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <asm/olpc.h>
+#include <asm/geode.h>
+#include "pci.h"
+
+/*
+ * In the tables below, the first two line (8 longwords) are the
+ * size masks that are used when the higher level PCI code determines
+ * the size of the region by writing ~0 to a base address register
+ * and reading back the result.
+ *
+ * The following lines are the values that are read during normal
+ * PCI config access cycles, i.e. not after just having written
+ * ~0 to a base address register.
+ */
+
+static const uint32_t lxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */
+ 0x0, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+
+ 0x281022, 0x2200005, 0x6000021, 0x80f808, /* AMD Vendor ID */
+ 0x0, 0x0, 0x0, 0x0, /* No virtual registers, hence no BAR */
+ 0x0, 0x0, 0x0, 0x28100b,
+ 0x0, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+};
+
+static const uint32_t gxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */
+ 0xfffffffd, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+
+ 0x28100b, 0x2200005, 0x6000021, 0x80f808, /* NSC Vendor ID */
+ 0xac1d, 0x0, 0x0, 0x0, /* I/O BAR - base of virtual registers */
+ 0x0, 0x0, 0x0, 0x28100b,
+ 0x0, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+};
+
+static const uint32_t lxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */
+ 0xff000008, 0xffffc000, 0xffffc000, 0xffffc000,
+ 0xffffc000, 0x0, 0x0, 0x0,
+
+ 0x20811022, 0x2200003, 0x3000000, 0x0, /* AMD Vendor ID */
+ 0xfd000000, 0xfe000000, 0xfe004000, 0xfe008000, /* FB, GP, VG, DF */
+ 0xfe00c000, 0x0, 0x0, 0x30100b, /* VIP */
+ 0x0, 0x0, 0x0, 0x10e, /* INTA, IRQ14 for graphics accel */
+ 0x0, 0x0, 0x0, 0x0,
+ 0x3d0, 0x3c0, 0xa0000, 0x0, /* VG IO, VG IO, EGA FB, MONO FB */
+ 0x0, 0x0, 0x0, 0x0,
+};
+
+static const uint32_t gxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */
+ 0xff800008, 0xffffc000, 0xffffc000, 0xffffc000,
+ 0x0, 0x0, 0x0, 0x0,
+
+ 0x30100b, 0x2200003, 0x3000000, 0x0, /* NSC Vendor ID */
+ 0xfd000000, 0xfe000000, 0xfe004000, 0xfe008000, /* FB, GP, VG, DF */
+ 0x0, 0x0, 0x0, 0x30100b,
+ 0x0, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+ 0x3d0, 0x3c0, 0xa0000, 0x0, /* VG IO, VG IO, EGA FB, MONO FB */
+ 0x0, 0x0, 0x0, 0x0,
+};
+
+static const uint32_t aes_hdr[] = { /* dev 1 function 2 - devfn = 0xa */
+ 0xffffc000, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+
+ 0x20821022, 0x2a00006, 0x10100000, 0x8, /* NSC Vendor ID */
+ 0xfe010000, 0x0, 0x0, 0x0, /* AES registers */
+ 0x0, 0x0, 0x0, 0x20821022,
+ 0x0, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+};
+
+
+static const uint32_t isa_hdr[] = { /* dev f function 0 - devfn = 78 */
+ 0xfffffff9, 0xffffff01, 0xffffffc1, 0xffffffe1,
+ 0xffffff81, 0xffffffc1, 0x0, 0x0,
+
+ 0x20901022, 0x2a00049, 0x6010003, 0x802000,
+ 0x18b1, 0x1001, 0x1801, 0x1881, /* SMB-8 GPIO-256 MFGPT-64 IRQ-32 */
+ 0x1401, 0x1841, 0x0, 0x20901022, /* PMS-128 ACPI-64 */
+ 0x0, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0xaa5b, /* IRQ steering */
+ 0x0, 0x0, 0x0, 0x0,
+};
+
+static const uint32_t ac97_hdr[] = { /* dev f function 3 - devfn = 7b */
+ 0xffffff81, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+
+ 0x20931022, 0x2a00041, 0x4010001, 0x0,
+ 0x1481, 0x0, 0x0, 0x0, /* I/O BAR-128 */
+ 0x0, 0x0, 0x0, 0x20931022,
+ 0x0, 0x0, 0x0, 0x205, /* IntB, IRQ5 */
+ 0x0, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+};
+
+static const uint32_t ohci_hdr[] = { /* dev f function 4 - devfn = 7c */
+ 0xfffff000, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+
+ 0x20941022, 0x2300006, 0xc031002, 0x0,
+ 0xfe01a000, 0x0, 0x0, 0x0, /* MEMBAR-1000 */
+ 0x0, 0x0, 0x0, 0x20941022,
+ 0x0, 0x40, 0x0, 0x40a, /* CapPtr INT-D, IRQA */
+ 0xc8020001, 0x0, 0x0, 0x0, /* Capabilities - 40 is R/O,
+ 44 is mask 8103 (power control) */
+ 0x0, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+};
+
+static const uint32_t ehci_hdr[] = { /* dev f function 4 - devfn = 7d */
+ 0xfffff000, 0x0, 0x0, 0x0,
+ 0x0, 0x0, 0x0, 0x0,
+
+ 0x20951022, 0x2300006, 0xc032002, 0x0,
+ 0xfe01b000, 0x0, 0x0, 0x0, /* MEMBAR-1000 */
+ 0x0, 0x0, 0x0, 0x20951022,
+ 0x0, 0x40, 0x0, 0x40a, /* CapPtr INT-D, IRQA */
+ 0xc8020001, 0x0, 0x0, 0x0, /* Capabilities - 40 is R/O, 44 is
+ mask 8103 (power control) */
+#if 0
+ 0x1, 0x40080000, 0x0, 0x0, /* EECP - see EHCI spec section 2.1.7 */
+#endif
+ 0x01000001, 0x0, 0x0, 0x0, /* EECP - see EHCI spec section 2.1.7 */
+ 0x2020, 0x0, 0x0, 0x0, /* (EHCI page 8) 60 SBRN (R/O),
+ 61 FLADJ (R/W), PORTWAKECAP */
+};
+
+static uint32_t ff_loc = ~0;
+static uint32_t zero_loc;
+static int bar_probing; /* Set after a write of ~0 to a BAR */
+static int is_lx;
+
+#define NB_SLOT 0x1 /* Northbridge - GX chip - Device 1 */
+#define SB_SLOT 0xf /* Southbridge - CS5536 chip - Device F */
+
+static int is_simulated(unsigned int bus, unsigned int devfn)
+{
+ return (!bus && ((PCI_SLOT(devfn) == NB_SLOT) ||
+ (PCI_SLOT(devfn) == SB_SLOT)));
+}
+
+static uint32_t *hdr_addr(const uint32_t *hdr, int reg)
+{
+ uint32_t addr;
+
+ /*
+ * This is a little bit tricky. The header maps consist of
+ * 0x20 bytes of size masks, followed by 0x70 bytes of header data.
+ * In the normal case, when not probing a BAR's size, we want
+ * to access the header data, so we add 0x20 to the reg offset,
+ * thus skipping the size mask area.
+ * In the BAR probing case, we want to access the size mask for
+ * the BAR, so we subtract 0x10 (the config header offset for
+ * BAR0), and don't skip the size mask area.
+ */
+
+ addr = (uint32_t)hdr + reg + (bar_probing ? -0x10 : 0x20);
+
+ bar_probing = 0;
+ return (uint32_t *)addr;
+}
+
+static int pci_olpc_read(unsigned int seg, unsigned int bus,
+ unsigned int devfn, int reg, int len, uint32_t *value)
+{
+ uint32_t *addr;
+
+ /* Use the hardware mechanism for non-simulated devices */
+ if (!is_simulated(bus, devfn))
+ return pci_direct_conf1.read(seg, bus, devfn, reg, len, value);
+
+ /*
+ * No device has config registers past 0x70, so we save table space
+ * by not storing entries for the nonexistent registers
+ */
+ if (reg >= 0x70)
+ addr = &zero_loc;
+ else {
+ switch (devfn) {
+ case 0x8:
+ addr = hdr_addr(is_lx ? lxnb_hdr : gxnb_hdr, reg);
+ break;
+ case 0x9:
+ addr = hdr_addr(is_lx ? lxfb_hdr : gxfb_hdr, reg);
+ break;
+ case 0xa:
+ addr = is_lx ? hdr_addr(aes_hdr, reg) : &ff_loc;
+ break;
+ case 0x78:
+ addr = hdr_addr(isa_hdr, reg);
+ break;
+ case 0x7b:
+ addr = hdr_addr(ac97_hdr, reg);
+ break;
+ case 0x7c:
+ addr = hdr_addr(ohci_hdr, reg);
+ break;
+ case 0x7d:
+ addr = hdr_addr(ehci_hdr, reg);
+ break;
+ default:
+ addr = &ff_loc;
+ break;
+ }
+ }
+ switch (len) {
+ case 1:
+ *value = *(uint8_t *)addr;
+ break;
+ case 2:
+ *value = *(uint16_t *)addr;
+ break;
+ case 4:
+ *value = *addr;
+ break;
+ default:
+ BUG();
+ }
+
+ return 0;
+}
+
+static int pci_olpc_write(unsigned int seg, unsigned int bus,
+ unsigned int devfn, int reg, int len, uint32_t value)
+{
+ /* Use the hardware mechanism for non-simulated devices */
+ if (!is_simulated(bus, devfn))
+ return pci_direct_conf1.write(seg, bus, devfn, reg, len, value);
+
+ /* XXX we may want to extend this to simulate EHCI power management */
+
+ /*
+ * Mostly we just discard writes, but if the write is a size probe
+ * (i.e. writing ~0 to a BAR), we remember it and arrange to return
+ * the appropriate size mask on the next read. This is cheating
+ * to some extent, because it depends on the fact that the next
+ * access after such a write will always be a read to the same BAR.
+ */
+
+ if ((reg >= 0x10) && (reg < 0x2c)) {
+ /* write is to a BAR */
+ if (value == ~0)
+ bar_probing = 1;
+ } else {
+ /*
+ * No warning on writes to ROM BAR, CMD, LATENCY_TIMER,
+ * CACHE_LINE_SIZE, or PM registers.
+ */
+ if ((reg != PCI_ROM_ADDRESS) && (reg != PCI_COMMAND_MASTER) &&
+ (reg != PCI_LATENCY_TIMER) &&
+ (reg != PCI_CACHE_LINE_SIZE) && (reg != 0x44))
+ printk(KERN_WARNING "OLPC PCI: Config write to devfn"
+ " %x reg %x value %x\n", devfn, reg, value);
+ }
+
+ return 0;
+}
+
+static struct pci_raw_ops pci_olpc_conf = {
+ .read = pci_olpc_read,
+ .write = pci_olpc_write,
+};
+
+void __init pci_olpc_init(void)
+{
+ if (!machine_is_olpc() || olpc_has_vsa())
+ return;
+
+ printk(KERN_INFO "PCI: Using configuration type OLPC\n");
+ raw_pci_ops = &pci_olpc_conf;
+ is_lx = is_geode_lx();
+}
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h
index c4bddae..7d84e81 100644
--- a/arch/x86/pci/pci.h
+++ b/arch/x86/pci/pci.h
@@ -98,6 +98,7 @@ extern int pci_direct_probe(void);
extern void pci_direct_init(int type);
extern void pci_pcbios_init(void);
extern void pci_mmcfg_init(int type);
+extern void pci_olpc_init(void);
/* pci-mmconfig.c */
diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c
index af7a231..ab1e828 100644
--- a/drivers/power/olpc_battery.c
+++ b/drivers/power/olpc_battery.c
@@ -315,7 +315,6 @@ static int __init olpc_bat_init(void)
if (ret)
goto battery_failed;
- olpc_register_battery_callback(&olpc_battery_trigger_uevent);
goto success;
battery_failed:
@@ -328,7 +327,6 @@ success:
static void __exit olpc_bat_exit(void)
{
- olpc_deregister_battery_callback();
power_supply_unregister(&olpc_bat);
power_supply_unregister(&olpc_ac);
platform_device_unregister(bat_pdev);
diff --git a/include/asm-x86/olpc.h b/include/asm-x86/olpc.h
new file mode 100644
index 0000000..97d4713
--- /dev/null
+++ b/include/asm-x86/olpc.h
@@ -0,0 +1,132 @@
+/* OLPC machine specific definitions */
+
+#ifndef ASM_OLPC_H_
+#define ASM_OLPC_H_
+
+#include <asm/geode.h>
+
+struct olpc_platform_t {
+ int flags;
+ uint32_t boardrev;
+ int ecver;
+};
+
+#define OLPC_F_PRESENT 0x01
+#define OLPC_F_DCON 0x02
+#define OLPC_F_VSA 0x04
+
+#ifdef CONFIG_OLPC
+
+extern struct olpc_platform_t olpc_platform_info;
+
+/*
+ * OLPC board IDs contain the major build number within the mask 0x0ff0,
+ * and the minor build number withing 0x000f. Pre-builds have a minor
+ * number less than 8, and normal builds start at 8. For example, 0x0B10
+ * is a PreB1, and 0x0C18 is a C1.
+ */
+
+static inline uint32_t olpc_board(uint8_t id)
+{
+ return (id << 4) | 0x8;
+}
+
+static inline uint32_t olpc_board_pre(uint8_t id)
+{
+ return id << 4;
+}
+
+static inline int machine_is_olpc(void)
+{
+ return (olpc_platform_info.flags & OLPC_F_PRESENT) ? 1 : 0;
+}
+
+/*
+ * The DCON is OLPC's Display Controller. It has a number of unique
+ * features that we might want to take advantage of..
+ */
+static inline int olpc_has_dcon(void)
+{
+ return (olpc_platform_info.flags & OLPC_F_DCON) ? 1 : 0;
+}
+
+/*
+ * The VSA is software from AMD that typical Geode bioses will include.
+ * It is used to emulate the PCI bus, VGA, etc. OLPC's Open Firmware does
+ * not include the VSA; instead, PCI is emulated by the kernel.
+ *
+ * The VSA is described further in arch/x86/pci/olpc.c.
+ */
+static inline int olpc_has_vsa(void)
+{
+ return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0;
+}
+
+/*
+ * The "Mass Production" version of OLPC's XO is identified as being model
+ * C2. During the prototype phase, the following models (in chronological
+ * order) were created: A1, B1, B2, B3, B4, C1. The A1 through B2 models
+ * were based on Geode GX CPUs, and models after that were based upon
+ * Geode LX CPUs. There were also some hand-assembled models floating
+ * around, referred to as PreB1, PreB2, etc.
+ */
+static inline int olpc_board_at_least(uint32_t rev)
+{
+ return olpc_platform_info.boardrev >= rev;
+}
+
+#else
+
+static inline int machine_is_olpc(void)
+{
+ return 0;
+}
+
+static inline int olpc_has_dcon(void)
+{
+ return 0;
+}
+
+static inline int olpc_has_vsa(void)
+{
+ return 0;
+}
+
+#endif
+
+/* EC related functions */
+
+extern int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
+ unsigned char *outbuf, size_t outlen);
+
+extern int olpc_ec_mask_set(uint8_t bits);
+extern int olpc_ec_mask_unset(uint8_t bits);
+
+/* EC commands */
+
+#define EC_FIRMWARE_REV 0x08
+
+/* SCI source values */
+
+#define EC_SCI_SRC_EMPTY 0x00
+#define EC_SCI_SRC_GAME 0x01
+#define EC_SCI_SRC_BATTERY 0x02
+#define EC_SCI_SRC_BATSOC 0x04
+#define EC_SCI_SRC_BATERR 0x08
+#define EC_SCI_SRC_EBOOK 0x10
+#define EC_SCI_SRC_WLAN 0x20
+#define EC_SCI_SRC_ACPWR 0x40
+#define EC_SCI_SRC_ALL 0x7F
+
+/* GPIO assignments */
+
+#define OLPC_GPIO_MIC_AC geode_gpio(1)
+#define OLPC_GPIO_DCON_IRQ geode_gpio(7)
+#define OLPC_GPIO_THRM_ALRM geode_gpio(10)
+#define OLPC_GPIO_SMB_CLK geode_gpio(14)
+#define OLPC_GPIO_SMB_DATA geode_gpio(15)
+#define OLPC_GPIO_WORKAUX geode_gpio(24)
+#define OLPC_GPIO_LID geode_gpio(26)
+#define OLPC_GPIO_ECSCI geode_gpio(27)
+
+#endif