diff options
-rw-r--r-- | drivers/media/video/cx18/cx18-audio.c | 50 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-audio.h | 2 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-av-core.c | 15 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-av-core.h | 2 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-cards.c | 32 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-cards.h | 14 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-controls.c | 15 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-driver.c | 86 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-driver.h | 24 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-fileops.c | 6 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-i2c.c | 284 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-i2c.h | 5 | ||||
-rw-r--r-- | drivers/media/video/cx18/cx18-ioctl.c | 78 |
13 files changed, 250 insertions, 363 deletions
diff --git a/drivers/media/video/cx18/cx18-audio.c b/drivers/media/video/cx18/cx18-audio.c index d19bd77..ccd1708 100644 --- a/drivers/media/video/cx18/cx18-audio.c +++ b/drivers/media/video/cx18/cx18-audio.c @@ -23,9 +23,7 @@ #include "cx18-driver.h" #include "cx18-io.h" -#include "cx18-i2c.h" #include "cx18-cards.h" -#include "cx18-audio.h" #define CX18_AUDIO_ENABLE 0xc72014 @@ -33,54 +31,32 @@ settings. */ int cx18_audio_set_io(struct cx18 *cx) { + const struct cx18_card_audio_input *in; struct v4l2_routing route; - u32 audio_input; u32 val; - int mux_input; int err; /* Determine which input to use */ - if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) { - audio_input = cx->card->radio_input.audio_input; - mux_input = cx->card->radio_input.muxer_input; - } else { - audio_input = - cx->card->audio_inputs[cx->audio_input].audio_input; - mux_input = - cx->card->audio_inputs[cx->audio_input].muxer_input; - } + if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) + in = &cx->card->radio_input; + else + in = &cx->card->audio_inputs[cx->audio_input]; /* handle muxer chips */ - route.input = mux_input; + route.input = in->muxer_input; route.output = 0; - cx18_i2c_hw(cx, cx->card->hw_muxer, VIDIOC_INT_S_AUDIO_ROUTING, &route); + v4l2_subdev_call(cx->sd_extmux, audio, s_routing, &route); - route.input = audio_input; - err = cx18_i2c_hw(cx, cx->card->hw_audio_ctrl, - VIDIOC_INT_S_AUDIO_ROUTING, &route); + route.input = in->audio_input; + err = cx18_call_hw_err(cx, cx->card->hw_audio_ctrl, + audio, s_routing, &route); if (err) return err; + /* FIXME - this internal mux should be abstracted to a subdev */ val = cx18_read_reg(cx, CX18_AUDIO_ENABLE) & ~0x30; - val |= (audio_input > CX18_AV_AUDIO_SERIAL2) ? 0x20 : - (audio_input << 4); + val |= (in->audio_input > CX18_AV_AUDIO_SERIAL2) ? 0x20 : + (in->audio_input << 4); cx18_write_reg_expect(cx, val | 0xb00, CX18_AUDIO_ENABLE, val, 0x30); return 0; } - -void cx18_audio_set_route(struct cx18 *cx, struct v4l2_routing *route) -{ - cx18_i2c_hw(cx, cx->card->hw_audio_ctrl, - VIDIOC_INT_S_AUDIO_ROUTING, route); -} - -void cx18_audio_set_audio_clock_freq(struct cx18 *cx, u8 freq) -{ - static u32 freqs[3] = { 44100, 48000, 32000 }; - - /* The audio clock of the digitizer must match the codec sample - rate otherwise you get some very strange effects. */ - if (freq > 2) - return; - cx18_call_i2c_clients(cx, VIDIOC_INT_AUDIO_CLOCK_FREQ, &freqs[freq]); -} diff --git a/drivers/media/video/cx18/cx18-audio.h b/drivers/media/video/cx18/cx18-audio.h index cb569a6..2731d29 100644 --- a/drivers/media/video/cx18/cx18-audio.h +++ b/drivers/media/video/cx18/cx18-audio.h @@ -22,5 +22,3 @@ */ int cx18_audio_set_io(struct cx18 *cx); -void cx18_audio_set_route(struct cx18 *cx, struct v4l2_routing *route); -void cx18_audio_set_audio_clock_freq(struct cx18 *cx, u8 freq); diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c index f9bb77a..2128070 100644 --- a/drivers/media/video/cx18/cx18-av-core.c +++ b/drivers/media/video/cx18/cx18-av-core.c @@ -1209,9 +1209,10 @@ static const struct v4l2_subdev_ops cx18_av_ops = { .video = &cx18_av_video_ops, }; -int cx18_av_probe(struct cx18 *cx, struct v4l2_subdev **sd) +int cx18_av_probe(struct cx18 *cx) { struct cx18_av_state *state = &cx->av_state; + struct v4l2_subdev *sd; state->rev = cx18_av_read4(cx, CXADEC_CHIP_CTRL) & 0xffff; state->id = ((state->rev >> 4) == CXADEC_CHIP_TYPE_MAKO) @@ -1224,13 +1225,13 @@ int cx18_av_probe(struct cx18 *cx, struct v4l2_subdev **sd) state->slicer_line_delay = 0; state->slicer_line_offset = (10 + state->slicer_line_delay - 2); - *sd = &state->sd; - v4l2_subdev_init(*sd, &cx18_av_ops); - v4l2_set_subdevdata(*sd, cx); - snprintf((*sd)->name, sizeof((*sd)->name), + sd = &state->sd; + v4l2_subdev_init(sd, &cx18_av_ops); + v4l2_set_subdevdata(sd, cx); + snprintf(sd->name, sizeof(sd->name), "%s internal A/V decoder", cx->v4l2_dev.name); - (*sd)->grp_id = CX18_HW_CX23418; - return v4l2_device_register_subdev(&cx->v4l2_dev, *sd); + sd->grp_id = CX18_HW_418_AV; + return v4l2_device_register_subdev(&cx->v4l2_dev, sd); } void cx18_av_exit(struct cx18 *cx, struct v4l2_subdev *sd) diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h index 90bdca9..cd9c0e7 100644 --- a/drivers/media/video/cx18/cx18-av-core.h +++ b/drivers/media/video/cx18/cx18-av-core.h @@ -342,7 +342,7 @@ int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned mask, u8 value); int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 mask, u32 value); void cx18_av_std_setup(struct cx18 *cx); -int cx18_av_probe(struct cx18 *cx, struct v4l2_subdev **sd); +int cx18_av_probe(struct cx18 *cx); void cx18_av_exit(struct cx18 *cx, struct v4l2_subdev *sd); /* ----------------------------------------------------------------------- */ diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index 6e2105a..6644534 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -53,9 +53,9 @@ static const struct cx18_card cx18_card_hvr1600_esmt = { .name = "Hauppauge HVR-1600", .comment = "Simultaneous Digital and Analog TV capture supported\n", .v4l2_capabilities = CX18_CAP_ENCODER, - .hw_audio_ctrl = CX18_HW_CX23418, + .hw_audio_ctrl = CX18_HW_418_AV, .hw_muxer = CX18_HW_CS5345, - .hw_all = CX18_HW_TVEEPROM | CX18_HW_TUNER | + .hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_CS5345 | CX18_HW_DVB, .video_inputs = { { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 }, @@ -99,9 +99,9 @@ static const struct cx18_card cx18_card_hvr1600_samsung = { .name = "Hauppauge HVR-1600 (Preproduction)", .comment = "Simultaneous Digital and Analog TV capture supported\n", .v4l2_capabilities = CX18_CAP_ENCODER, - .hw_audio_ctrl = CX18_HW_CX23418, + .hw_audio_ctrl = CX18_HW_418_AV, .hw_muxer = CX18_HW_CS5345, - .hw_all = CX18_HW_TVEEPROM | CX18_HW_TUNER | + .hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_CS5345 | CX18_HW_DVB, .video_inputs = { { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 }, @@ -154,8 +154,8 @@ static const struct cx18_card cx18_card_h900 = { .name = "Compro VideoMate H900", .comment = "Analog TV capture supported\n", .v4l2_capabilities = CX18_CAP_ENCODER, - .hw_audio_ctrl = CX18_HW_CX23418, - .hw_all = CX18_HW_TUNER, + .hw_audio_ctrl = CX18_HW_418_AV, + .hw_all = CX18_HW_418_AV | CX18_HW_TUNER, .video_inputs = { { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, { CX18_CARD_INPUT_SVIDEO1, 1, @@ -201,8 +201,8 @@ static const struct cx18_card cx18_card_mpc718 = { .name = "Yuan MPC718", .comment = "Analog video capture works; some audio line in may not.\n", .v4l2_capabilities = CX18_CAP_ENCODER, - .hw_audio_ctrl = CX18_HW_CX23418, - .hw_all = CX18_HW_TUNER, + .hw_audio_ctrl = CX18_HW_418_AV, + .hw_all = CX18_HW_418_AV | CX18_HW_TUNER, .video_inputs = { { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, { CX18_CARD_INPUT_SVIDEO1, 1, @@ -251,9 +251,9 @@ static const struct cx18_card cx18_card_cnxt_raptor_pal = { .name = "Conexant Raptor PAL/SECAM", .comment = "Analog TV capture supported\n", .v4l2_capabilities = CX18_CAP_ENCODER, - .hw_audio_ctrl = CX18_HW_CX23418, - .hw_muxer = CX18_HW_GPIO, - .hw_all = CX18_HW_TUNER | CX18_HW_GPIO, + .hw_audio_ctrl = CX18_HW_418_AV, + .hw_muxer = CX18_HW_GPIO_AUDIO_MUX, + .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_AUDIO_MUX, .video_inputs = { { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, { CX18_CARD_INPUT_SVIDEO1, 1, @@ -306,8 +306,8 @@ static const struct cx18_card cx18_card_toshiba_qosmio_dvbt = { .comment = "Experimenters and photos needed for device to work well.\n" "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n", .v4l2_capabilities = CX18_CAP_ENCODER, - .hw_audio_ctrl = CX18_HW_CX23418, - .hw_all = CX18_HW_TUNER, + .hw_audio_ctrl = CX18_HW_418_AV, + .hw_all = CX18_HW_418_AV | CX18_HW_TUNER, .video_inputs = { { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE6 }, { CX18_CARD_INPUT_SVIDEO1, 1, @@ -350,9 +350,9 @@ static const struct cx18_card cx18_card_leadtek_pvr2100 = { .comment = "Experimenters and photos needed for device to work well.\n" "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n", .v4l2_capabilities = CX18_CAP_ENCODER, - .hw_audio_ctrl = CX18_HW_CX23418, - .hw_muxer = CX18_HW_GPIO, - .hw_all = CX18_HW_TUNER | CX18_HW_GPIO, + .hw_audio_ctrl = CX18_HW_418_AV, + .hw_muxer = CX18_HW_GPIO_AUDIO_MUX, + .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_AUDIO_MUX, .video_inputs = { { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, { CX18_CARD_INPUT_SVIDEO1, 1, diff --git a/drivers/media/video/cx18/cx18-cards.h b/drivers/media/video/cx18/cx18-cards.h index f8ee29f..bd7f955 100644 --- a/drivers/media/video/cx18/cx18-cards.h +++ b/drivers/media/video/cx18/cx18-cards.h @@ -22,12 +22,12 @@ */ /* hardware flags */ -#define CX18_HW_TUNER (1 << 0) -#define CX18_HW_TVEEPROM (1 << 1) -#define CX18_HW_CS5345 (1 << 2) -#define CX18_HW_GPIO (1 << 3) -#define CX18_HW_CX23418 (1 << 4) -#define CX18_HW_DVB (1 << 5) +#define CX18_HW_TUNER (1 << 0) +#define CX18_HW_TVEEPROM (1 << 1) +#define CX18_HW_CS5345 (1 << 2) +#define CX18_HW_DVB (1 << 3) +#define CX18_HW_418_AV (1 << 4) +#define CX18_HW_GPIO_AUDIO_MUX (1 << 5) /* video inputs */ #define CX18_CARD_INPUT_VID_TUNER 1 @@ -121,7 +121,7 @@ struct cx18_card { char *comment; u32 v4l2_capabilities; u32 hw_audio_ctrl; /* hardware used for the V4L2 controls (only - 1 dev allowed) */ + 1 dev allowed currently) */ u32 hw_muxer; /* hardware used to multiplex audio input */ u32 hw_all; /* all hardware used by the board */ struct cx18_card_video_input video_inputs[CX18_CARD_MAX_VIDEO_INPUTS]; diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c index 9505c41..e5604c2 100644 --- a/drivers/media/video/cx18/cx18-controls.c +++ b/drivers/media/video/cx18/cx18-controls.c @@ -77,7 +77,7 @@ int cx18_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *qctrl) case V4L2_CID_AUDIO_BASS: case V4L2_CID_AUDIO_TREBLE: case V4L2_CID_AUDIO_LOUDNESS: - if (cx18_i2c_hw(cx, cx->card->hw_audio_ctrl, VIDIOC_QUERYCTRL, qctrl)) + if (v4l2_subdev_call(cx->sd_av, core, queryctrl, qctrl)) qctrl->flags |= V4L2_CTRL_FLAG_DISABLED; return 0; @@ -134,7 +134,7 @@ static int cx18_s_ctrl(struct cx18 *cx, struct v4l2_control *vctrl) case V4L2_CID_AUDIO_BASS: case V4L2_CID_AUDIO_TREBLE: case V4L2_CID_AUDIO_LOUDNESS: - return cx18_i2c_hw(cx, cx->card->hw_audio_ctrl, VIDIOC_S_CTRL, vctrl); + return v4l2_subdev_call(cx->sd_av, core, s_ctrl, vctrl); default: CX18_DEBUG_IOCTL("invalid control 0x%x\n", vctrl->id); @@ -159,7 +159,8 @@ static int cx18_g_ctrl(struct cx18 *cx, struct v4l2_control *vctrl) case V4L2_CID_AUDIO_BASS: case V4L2_CID_AUDIO_TREBLE: case V4L2_CID_AUDIO_LOUDNESS: - return cx18_i2c_hw(cx, cx->card->hw_audio_ctrl, VIDIOC_G_CTRL, vctrl); + return v4l2_subdev_call(cx->sd_av, core, g_ctrl, vctrl); + default: CX18_DEBUG_IOCTL("invalid control 0x%x\n", vctrl->id); return -EINVAL; @@ -260,10 +261,12 @@ int cx18_s_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c) return err; } if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) { + static u32 freqs[3] = { 44100, 48000, 32000 }; struct cx18_api_func_private priv; struct cx2341x_mpeg_params p = cx->params; int err = cx2341x_ext_ctrls(&p, atomic_read(&cx->ana_capturing), c, VIDIOC_S_EXT_CTRLS); + unsigned int idx; if (err) return err; @@ -287,7 +290,11 @@ int cx18_s_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c) err = cx18_setup_vbi_fmt(cx, p.stream_vbi_fmt); cx->params = p; cx->dualwatch_stereo_mode = p.audio_properties & 0x0300; - cx18_audio_set_audio_clock_freq(cx, p.audio_properties & 0x03); + idx = p.audio_properties & 0x03; + /* The audio clock of the digitizer must match the codec sample + rate otherwise you get some very strange effects. */ + if (idx < sizeof(freqs)) + cx18_call_all(cx, audio, s_clock_freq, freqs[idx]); return err; } return -EINVAL; diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index f5a41dd..edbb83c 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -269,11 +269,16 @@ static void cx18_iounmap(struct cx18 *cx) /* Hauppauge card? get values from tveeprom */ void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv) { + struct i2c_client c; u8 eedata[256]; - cx->i2c_client[0].addr = 0xA0 >> 1; - tveeprom_read(&cx->i2c_client[0], eedata, sizeof(eedata)); - tveeprom_hauppauge_analog(&cx->i2c_client[0], tv, eedata); + strncpy(c.name, "cx18 tveeprom tmp", sizeof(c.name)); + c.name[sizeof(c.name)-1] = '\0'; + c.adapter = &cx->i2c_adap[0]; + c.addr = 0xA0 >> 1; + + tveeprom_read(&c, eedata, sizeof(eedata)); + tveeprom_hauppauge_analog(&c, tv, eedata); } static void cx18_process_eeprom(struct cx18 *cx) @@ -553,8 +558,6 @@ static int __devinit cx18_init_struct1(struct cx18 *cx) cx->base_addr = pci_resource_start(cx->pci_dev, 0); mutex_init(&cx->serialize_lock); - mutex_init(&cx->i2c_bus_lock[0]); - mutex_init(&cx->i2c_bus_lock[1]); mutex_init(&cx->gpio_lock); mutex_init(&cx->epu2apu_mb_lock); mutex_init(&cx->epu2cpu_mb_lock); @@ -669,54 +672,41 @@ static int cx18_setup_pci(struct cx18 *cx, struct pci_dev *pci_dev, return 0; } -#ifdef MODULE -static u32 cx18_request_module(struct cx18 *cx, u32 hw, - const char *name, u32 id) -{ - if ((hw & id) == 0) - return hw; - if (request_module("%s", name) != 0) { - CX18_ERR("Failed to load module %s\n", name); - return hw & ~id; - } - CX18_DEBUG_INFO("Loaded module %s\n", name); - return hw; -} -#endif - -static void cx18_load_and_init_modules(struct cx18 *cx) +static void cx18_init_subdevs(struct cx18 *cx) { u32 hw = cx->card->hw_all; + u32 device; int i; -#ifdef MODULE - /* load modules */ -#ifdef CONFIG_MEDIA_TUNER_MODULE - hw = cx18_request_module(cx, hw, "tuner", CX18_HW_TUNER); -#endif -#ifdef CONFIG_VIDEO_CS5345_MODULE - hw = cx18_request_module(cx, hw, "cs5345", CX18_HW_CS5345); -#endif -#endif - - /* check which i2c devices are actually found */ - for (i = 0; i < 32; i++) { - u32 device = 1 << i; + for (i = 0, device = 1; i < 32; i++, device <<= 1) { if (!(device & hw)) continue; - if (device == CX18_HW_GPIO || device == CX18_HW_TVEEPROM || - device == CX18_HW_CX23418 || device == CX18_HW_DVB) { - /* These 'devices' do not use i2c probing */ + + switch (device) { + case CX18_HW_GPIO_AUDIO_MUX: + case CX18_HW_DVB: + case CX18_HW_TVEEPROM: + /* These subordinate devices do not use probing */ cx->hw_flags |= device; - continue; - } - cx18_i2c_register(cx, i); - if (cx18_i2c_hw_addr(cx, device) > 0) + break; + case CX18_HW_418_AV: + /* The A/V decoder gets probed earlier to set PLLs */ + /* Just note that the card uses it (i.e. has analog) */ cx->hw_flags |= device; + break; + default: + if (cx18_i2c_register(cx, i) == 0) + cx->hw_flags |= device; + break; + } } - hw = cx->hw_flags; + if (cx->hw_flags & CX18_HW_418_AV) + cx->sd_av = cx18_find_hw(cx, CX18_HW_418_AV); + + if (cx->card->hw_muxer != 0) + cx->sd_extmux = cx18_find_hw(cx, cx->card->hw_muxer); } static int __devinit cx18_probe(struct pci_dev *pci_dev, @@ -803,15 +793,17 @@ static int __devinit cx18_probe(struct pci_dev *pci_dev, cx->scb = (struct cx18_scb __iomem *)(cx->enc_mem + SCB_OFFSET); cx18_init_scb(cx); + /* Initialize GPIO early so I2C device resets can be performed */ cx18_gpio_init(cx); - retval = cx18_av_probe(cx, &cx->sd_av); + /* Initialize integrated A/V decoder early to set PLLs, just in case */ + retval = cx18_av_probe(cx); if (retval) { CX18_ERR("Could not register A/V decoder subdevice\n"); goto free_map; } /* Initialize the A/V decoder PLLs to sane defaults */ - v4l2_subdev_call(cx->sd_av, core, init, (u32) CX18_AV_INIT_PLLS); + cx18_call_hw(cx, CX18_HW_418_AV, core, init, (u32) CX18_AV_INIT_PLLS); /* active i2c */ CX18_DEBUG_INFO("activating i2c...\n"); @@ -873,7 +865,7 @@ static int __devinit cx18_probe(struct pci_dev *pci_dev, initialization. */ cx18_init_struct2(cx); - cx18_load_and_init_modules(cx); + cx18_init_subdevs(cx); if (cx->std & V4L2_STD_525_60) { cx->is_60hz = 1; @@ -895,7 +887,7 @@ static int __devinit cx18_probe(struct pci_dev *pci_dev, setup.mode_mask = T_ANALOG_TV; /* matches TV tuners */ setup.tuner_callback = (setup.type == TUNER_XC2028) ? cx18_reset_tuner_gpio : NULL; - cx18_call_i2c_clients(cx, TUNER_SET_TYPE_ADDR, &setup); + cx18_call_all(cx, tuner, s_type_addr, &setup); if (setup.type == TUNER_XC2028) { static struct xc2028_ctrl ctrl = { .fname = XC2028_DEFAULT_FIRMWARE, @@ -905,7 +897,7 @@ static int __devinit cx18_probe(struct pci_dev *pci_dev, .tuner = cx->options.tuner, .priv = &ctrl, }; - cx18_call_i2c_clients(cx, TUNER_SET_CONFIG, &cfg); + cx18_call_all(cx, tuner, s_config, &cfg); } } diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index 4b50878..b81106d 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -448,7 +448,8 @@ struct cx18 { int instance; struct pci_dev *pci_dev; struct v4l2_device v4l2_dev; - struct v4l2_subdev *sd_av; + struct v4l2_subdev *sd_av; /* A/V decoder/digitizer sub-device */ + struct v4l2_subdev *sd_extmux; /* External audio multiplexer sub-dev */ const struct cx18_card *card; /* card information */ const char *card_name; /* full name of the card */ @@ -528,9 +529,6 @@ struct cx18 { struct i2c_adapter i2c_adap[2]; struct i2c_algo_bit_data i2c_algo[2]; struct cx18_i2c_algo_callback_data i2c_algo_cb_data[2]; - struct i2c_client i2c_client[2]; - struct mutex i2c_bus_lock[2]; - struct i2c_client *i2c_clients[I2C_CLIENTS_MAX]; /* gpio */ u32 gpio_dir; @@ -573,4 +571,22 @@ static inline int cx18_raw_vbi(const struct cx18 *cx) return cx->vbi.in.type == V4L2_BUF_TYPE_VBI_CAPTURE; } +/* Call the specified callback for all subdevs with a grp_id bit matching the + * mask in hw (if 0, then match them all). Ignore any errors. */ +#define cx18_call_hw(cx, hw, o, f, args...) \ + __v4l2_device_call_subdevs(&(cx)->v4l2_dev, \ + !(hw) || (sd->grp_id & (hw)), o, f , ##args) + +#define cx18_call_all(cx, o, f, args...) cx18_call_hw(cx, 0, o, f , ##args) + +/* Call the specified callback for all subdevs with a grp_id bit matching the + * mask in hw (if 0, then match them all). If the callback returns an error + * other than 0 or -ENOIOCTLCMD, then return with that error code. */ +#define cx18_call_hw_err(cx, hw, o, f, args...) \ + __v4l2_device_call_subdevs_until_err( \ + &(cx)->v4l2_dev, !(hw) || (sd->grp_id & (hw)), o, f , ##args) + +#define cx18_call_all_err(cx, o, f, args...) \ + cx18_call_hw_err(cx, 0, o, f , ##args) + #endif /* CX18_DRIVER_H */ diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c index 757982e..4d7d6d5 100644 --- a/drivers/media/video/cx18/cx18-fileops.c +++ b/drivers/media/video/cx18/cx18-fileops.c @@ -136,7 +136,7 @@ static void cx18_dualwatch(struct cx18 *cx) new_stereo_mode = cx->params.audio_properties & stereo_mask; memset(&vt, 0, sizeof(vt)); - cx18_call_i2c_clients(cx, VIDIOC_G_TUNER, &vt); + cx18_call_all(cx, tuner, g_tuner, &vt); if (vt.audmode == V4L2_TUNER_MODE_LANG1_LANG2 && (vt.rxsubchans & V4L2_TUNER_SUB_LANG2)) new_stereo_mode = dual; @@ -608,7 +608,7 @@ int cx18_v4l2_close(struct file *filp) /* Mark that the radio is no longer in use */ clear_bit(CX18_F_I_RADIO_USER, &cx->i_flags); /* Switch tuner to TV */ - cx18_call_i2c_clients(cx, VIDIOC_S_STD, &cx->std); + cx18_call_all(cx, tuner, s_std, cx->std); /* Select correct audio input (i.e. TV tuner or Line in) */ cx18_audio_set_io(cx); if (atomic_read(&cx->ana_capturing) > 0) { @@ -671,7 +671,7 @@ static int cx18_serialized_open(struct cx18_stream *s, struct file *filp) /* We have the radio */ cx18_mute(cx); /* Switch tuner to radio */ - cx18_call_i2c_clients(cx, AUDC_SET_RADIO, NULL); + cx18_call_all(cx, tuner, s_radio); /* Select the correct audio input (i.e. radio tuner) */ cx18_audio_set_io(cx); /* Done! Unmute and continue. */ diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c index db7b552..6357dc4 100644 --- a/drivers/media/video/cx18/cx18-i2c.c +++ b/drivers/media/video/cx18/cx18-i2c.c @@ -43,31 +43,34 @@ #define CX18_CS5345_I2C_ADDR 0x4c /* This array should match the CX18_HW_ defines */ -static const u8 hw_driverids[] = { - I2C_DRIVERID_TUNER, - I2C_DRIVERID_TVEEPROM, - I2C_DRIVERID_CS5345, - 0, /* CX18_HW_GPIO dummy driver ID */ - 0 /* CX18_HW_CX23418 dummy driver ID */ -}; - -/* This array should match the CX18_HW_ defines */ static const u8 hw_addrs[] = { - 0, - 0, - CX18_CS5345_I2C_ADDR, - 0, /* CX18_HW_GPIO dummy driver ID */ - 0, /* CX18_HW_CX23418 dummy driver ID */ + 0, /* CX18_HW_TUNER */ + 0, /* CX18_HW_TVEEPROM */ + CX18_CS5345_I2C_ADDR, /* CX18_HW_CS5345 */ + 0, /* CX18_HW_DVB */ + 0, /* CX18_HW_418_AV */ + 0, /* CX18_HW_GPIO_AUDIO_MUX */ }; /* This array should match the CX18_HW_ defines */ /* This might well become a card-specific array */ static const u8 hw_bus[] = { - 0, - 0, - 0, - 0, /* CX18_HW_GPIO dummy driver ID */ - 0, /* CX18_HW_CX23418 dummy driver ID */ + 1, /* CX18_HW_TUNER */ + 0, /* CX18_HW_TVEEPROM */ + 0, /* CX18_HW_CS5345 */ + 0, /* CX18_HW_DVB */ + 0, /* CX18_HW_418_AV */ + 0, /* CX18_HW_GPIO_AUDIO_MUX */ +}; + +/* This array should match the CX18_HW_ defines */ +static const char * const hw_modules[] = { + "tuner", /* CX18_HW_TUNER */ + NULL, /* CX18_HW_TVEEPROM */ + "cs5345", /* CX18_HW_CS5345 */ + NULL, /* CX18_HW_DVB */ + NULL, /* CX18_HW_418_AV */ + NULL, /* CX18_HW_GPIO_AUDIO_MUX */ }; /* This array should match the CX18_HW_ defines */ @@ -75,83 +78,66 @@ static const char * const hw_devicenames[] = { "tuner", "tveeprom", "cs5345", - "gpio", - "cx23418", + "cx23418_DTV", + "cx23418_AV", + "gpio_audio_mux", }; int cx18_i2c_register(struct cx18 *cx, unsigned idx) { - struct i2c_board_info info; - struct i2c_client *c; - u8 id, bus; - int i; - - CX18_DEBUG_I2C("i2c client register\n"); - if (idx >= ARRAY_SIZE(hw_driverids) || hw_driverids[idx] == 0) + struct v4l2_subdev *sd; + int bus = hw_bus[idx]; + struct i2c_adapter *adap = &cx->i2c_adap[bus]; + const char *mod = hw_modules[idx]; + const char *type = hw_devicenames[idx]; + u32 hw = 1 << idx; + + if (idx >= ARRAY_SIZE(hw_addrs)) return -1; - id = hw_driverids[idx]; - bus = hw_bus[idx]; - memset(&info, 0, sizeof(info)); - strlcpy(info.type, hw_devicenames[idx], sizeof(info.type)); - info.addr = hw_addrs[idx]; - for (i = 0; i < I2C_CLIENTS_MAX; i++) - if (cx->i2c_clients[i] == NULL) - break; - - if (i == I2C_CLIENTS_MAX) { - CX18_ERR("insufficient room for new I2C client!\n"); - return -ENOMEM; - } - if (id != I2C_DRIVERID_TUNER) { - c = i2c_new_device(&cx->i2c_adap[bus], &info); - if (c->driver == NULL) - i2c_unregister_device(c); - else - cx->i2c_clients[i] = c; - return cx->i2c_clients[i] ? 0 : -ENODEV; + if (hw == CX18_HW_TUNER) { + /* special tuner group handling */ + sd = v4l2_i2c_new_probed_subdev(adap, mod, type, + cx->card_i2c->radio); + if (sd != NULL) + sd->grp_id = hw; + sd = v4l2_i2c_new_probed_subdev(adap, mod, type, + cx->card_i2c->demod); + if (sd != NULL) + sd->grp_id = hw; + sd = v4l2_i2c_new_probed_subdev(adap, mod, type, + cx->card_i2c->tv); + if (sd != NULL) + sd->grp_id = hw; + return sd != NULL ? 0 : -1; } - /* special tuner handling */ - c = i2c_new_probed_device(&cx->i2c_adap[1], &info, cx->card_i2c->radio); - if (c && c->driver == NULL) - i2c_unregister_device(c); - else if (c) - cx->i2c_clients[i++] = c; - c = i2c_new_probed_device(&cx->i2c_adap[1], &info, cx->card_i2c->demod); - if (c && c->driver == NULL) - i2c_unregister_device(c); - else if (c) - cx->i2c_clients[i++] = c; - c = i2c_new_probed_device(&cx->i2c_adap[1], &info, cx->card_i2c->tv); - if (c && c->driver == NULL) - i2c_unregister_device(c); - else if (c) - cx->i2c_clients[i++] = c; - return 0; -} + /* Is it not an I2C device or one we do not wish to register? */ + if (!hw_addrs[idx]) + return -1; -static int attach_inform(struct i2c_client *client) -{ - return 0; + /* It's an I2C device other than an analog tuner */ + sd = v4l2_i2c_new_subdev(adap, mod, type, hw_addrs[idx]); + if (sd != NULL) + sd->grp_id = hw; + return sd != NULL ? 0 : -1; } -static int detach_inform(struct i2c_client *client) +/* Find the first member of the subdev group id in hw */ +struct v4l2_subdev *cx18_find_hw(struct cx18 *cx, u32 hw) { - int i; - struct cx18 *cx = (struct cx18 *)i2c_get_adapdata(client->adapter); + struct v4l2_subdev *result = NULL; + struct v4l2_subdev *sd; - CX18_DEBUG_I2C("i2c client detach\n"); - for (i = 0; i < I2C_CLIENTS_MAX; i++) { - if (cx->i2c_clients[i] == client) { - cx->i2c_clients[i] = NULL; + spin_lock(&cx->v4l2_dev.lock); + v4l2_device_for_each_subdev(sd, &cx->v4l2_dev) { + if (sd->grp_id == hw) { + result = sd; break; } } - CX18_DEBUG_I2C("i2c detach [client=%s,%s]\n", - client->name, (i < I2C_CLIENTS_MAX) ? "ok" : "failed"); - - return 0; + spin_unlock(&cx->v4l2_dev.lock); + return result; } static void cx18_setscl(void *data, int state) @@ -204,8 +190,6 @@ static struct i2c_adapter cx18_i2c_adap_template = { .id = I2C_HW_B_CX2341X, .algo = NULL, /* set by i2c-algo-bit */ .algo_data = NULL, /* filled from template */ - .client_register = attach_inform, - .client_unregister = detach_inform, .owner = THIS_MODULE, }; @@ -221,151 +205,27 @@ static struct i2c_algo_bit_data cx18_i2c_algo_template = { .timeout = CX18_ALGO_BIT_TIMEOUT*HZ /* jiffies */ }; -static struct i2c_client cx18_i2c_client_template = { - .name = "cx18 internal", -}; - -int cx18_call_i2c_client(struct cx18 *cx, int addr, unsigned cmd, void *arg) -{ - struct i2c_client *client; - int retval; - int i; - - CX18_DEBUG_I2C("call_i2c_client addr=%02x\n", addr); - for (i = 0; i < I2C_CLIENTS_MAX; i++) { - client = cx->i2c_clients[i]; - if (client == NULL || client->driver == NULL || - client->driver->command == NULL) - continue; - if (addr == client->addr) { - retval = client->driver->command(client, cmd, arg); - return retval; - } - } - if (cmd != VIDIOC_DBG_G_CHIP_IDENT) - CX18_ERR("i2c addr 0x%02x not found for cmd 0x%x!\n", - addr, cmd); - return -ENODEV; -} - -/* Find the i2c device based on the driver ID and return - its i2c address or -ENODEV if no matching device was found. */ -static int cx18_i2c_id_addr(struct cx18 *cx, u32 id) -{ - struct i2c_client *client; - int retval = -ENODEV; - int i; - - for (i = 0; i < I2C_CLIENTS_MAX; i++) { - client = cx->i2c_clients[i]; - if (client == NULL || client->driver == NULL) - continue; - if (id == client->driver->id) { - retval = client->addr; - break; - } - } - return retval; -} - -/* Find the i2c device name matching the CX18_HW_ flag */ -static const char *cx18_i2c_hw_name(u32 hw) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(hw_driverids); i++) - if (1 << i == hw) - return hw_devicenames[i]; - return "unknown device"; -} - -/* Find the i2c device matching the CX18_HW_ flag and return - its i2c address or -ENODEV if no matching device was found. */ -int cx18_i2c_hw_addr(struct cx18 *cx, u32 hw) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(hw_driverids); i++) - if (1 << i == hw) - return cx18_i2c_id_addr(cx, hw_driverids[i]); - return -ENODEV; -} - -/* Calls i2c device based on CX18_HW_ flag. If hw == 0, then do nothing. - If hw == CX18_HW_GPIO then call the gpio handler. */ -int cx18_i2c_hw(struct cx18 *cx, u32 hw, unsigned int cmd, void *arg) -{ - int addr; - - if (hw == 0) - return 0; - - if (hw == CX18_HW_GPIO) - return cx18_gpio(cx, cmd, arg); - - if (hw == CX18_HW_CX23418) - return v4l2_subdev_command(cx->sd_av, cmd, arg); - - addr = cx18_i2c_hw_addr(cx, hw); - if (addr < 0) { - CX18_ERR("i2c hardware 0x%08x (%s) not found for cmd 0x%x!\n", - hw, cx18_i2c_hw_name(hw), cmd); - return addr; - } - return cx18_call_i2c_client(cx, addr, cmd, arg); -} - -/* broadcast cmd for all I2C clients and for the gpio subsystem */ -void cx18_call_i2c_clients(struct cx18 *cx, unsigned int cmd, void *arg) -{ - if (cx->i2c_adap[0].algo == NULL || cx->i2c_adap[1].algo == NULL) { - CX18_ERR("adapter is not set\n"); - return; - } - v4l2_subdev_command(cx->sd_av, cmd, arg); - i2c_clients_command(&cx->i2c_adap[0], cmd, arg); - i2c_clients_command(&cx->i2c_adap[1], cmd, arg); - if (cx->hw_flags & CX18_HW_GPIO) - cx18_gpio(cx, cmd, arg); -} - /* init + register i2c algo-bit adapter */ int init_cx18_i2c(struct cx18 *cx) { int i; CX18_DEBUG_I2C("i2c init\n"); - /* Sanity checks for the I2C hardware arrays. They must be the - * same size and GPIO/CX23418 must be the last entries. - */ - if (ARRAY_SIZE(hw_driverids) != ARRAY_SIZE(hw_addrs) || - ARRAY_SIZE(hw_devicenames) != ARRAY_SIZE(hw_addrs) || - CX18_HW_GPIO != (1 << (ARRAY_SIZE(hw_addrs) - 2)) || - CX18_HW_CX23418 != (1 << (ARRAY_SIZE(hw_addrs) - 1)) || - hw_driverids[ARRAY_SIZE(hw_addrs) - 1]) { - CX18_ERR("Mismatched I2C hardware arrays\n"); - return -ENODEV; - } - for (i = 0; i < 2; i++) { - memcpy(&cx->i2c_adap[i], &cx18_i2c_adap_template, - sizeof(struct i2c_adapter)); + /* Setup algorithm for adapter */ memcpy(&cx->i2c_algo[i], &cx18_i2c_algo_template, sizeof(struct i2c_algo_bit_data)); cx->i2c_algo_cb_data[i].cx = cx; cx->i2c_algo_cb_data[i].bus_index = i; cx->i2c_algo[i].data = &cx->i2c_algo_cb_data[i]; - cx->i2c_adap[i].algo_data = &cx->i2c_algo[i]; + /* Setup adapter */ + memcpy(&cx->i2c_adap[i], &cx18_i2c_adap_template, + sizeof(struct i2c_adapter)); + cx->i2c_adap[i].algo_data = &cx->i2c_algo[i]; sprintf(cx->i2c_adap[i].name + strlen(cx->i2c_adap[i].name), " #%d-%d", cx->instance, i); - i2c_set_adapdata(&cx->i2c_adap[i], cx); - - memcpy(&cx->i2c_client[i], &cx18_i2c_client_template, - sizeof(struct i2c_client)); - sprintf(cx->i2c_client[i].name + - strlen(cx->i2c_client[i].name), "%d", i); - cx->i2c_client[i].adapter = &cx->i2c_adap[i]; + i2c_set_adapdata(&cx->i2c_adap[i], &cx->v4l2_dev); cx->i2c_adap[i].dev.parent = &cx->pci_dev->dev; } diff --git a/drivers/media/video/cx18/cx18-i2c.h b/drivers/media/video/cx18/cx18-i2c.h index 4869739..bdfd192 100644 --- a/drivers/media/video/cx18/cx18-i2c.h +++ b/drivers/media/video/cx18/cx18-i2c.h @@ -21,11 +21,8 @@ * 02111-1307 USA */ -int cx18_i2c_hw_addr(struct cx18 *cx, u32 hw); -int cx18_i2c_hw(struct cx18 *cx, u32 hw, unsigned int cmd, void *arg); -int cx18_call_i2c_client(struct cx18 *cx, int addr, unsigned cmd, void *arg); -void cx18_call_i2c_clients(struct cx18 *cx, unsigned int cmd, void *arg); int cx18_i2c_register(struct cx18 *cx, unsigned idx); +struct v4l2_subdev *cx18_find_hw(struct cx18 *cx, u32 hw); /* init + register i2c algo-bit adapter */ int init_cx18_i2c(struct cx18 *cx); diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c index 0ddf4dd..13ebd4a 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -372,15 +372,52 @@ static int cx18_g_chip_ident(struct file *file, void *fh, struct v4l2_dbg_chip_ident *chip) { struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + int err = 0; chip->ident = V4L2_IDENT_NONE; chip->revision = 0; - if (v4l2_chip_match_host(&chip->match)) { - chip->ident = V4L2_IDENT_CX23418; - return 0; + switch (chip->match.type) { + case V4L2_CHIP_MATCH_HOST: + switch (chip->match.addr) { + case 0: + chip->ident = V4L2_IDENT_CX23418; + chip->revision = cx18_read_reg(cx, 0xC72028); + break; + case 1: + /* + * The A/V decoder is always present, but in the rare + * case that the card doesn't have analog, we don't + * use it. We find it w/o using the cx->sd_av pointer + */ + cx18_call_hw(cx, CX18_HW_418_AV, + core, g_chip_ident, chip); + break; + default: + /* + * Could return ident = V4L2_IDENT_UNKNOWN if we had + * other host chips at higher addresses, but we don't + */ + err = -EINVAL; /* per V4L2 spec */ + break; + } + break; + case V4L2_CHIP_MATCH_I2C_DRIVER: + /* If needed, returns V4L2_IDENT_AMBIGUOUS without extra work */ + cx18_call_all(cx, core, g_chip_ident, chip); + break; + case V4L2_CHIP_MATCH_I2C_ADDR: + /* + * We could return V4L2_IDENT_UNKNOWN, but we don't do the work + * to look if a chip is at the address with no driver. That's a + * dangerous thing to do with EEPROMs anyway. + */ + cx18_call_all(cx, core, g_chip_ident, chip); + break; + default: + err = -EINVAL; + break; } - cx18_call_i2c_clients(cx, VIDIOC_DBG_G_CHIP_IDENT, chip); - return 0; + return err; } #ifdef CONFIG_VIDEO_ADV_DEBUG @@ -394,10 +431,10 @@ static int cx18_cxc(struct cx18 *cx, unsigned int cmd, void *arg) return -EINVAL; regs->size = 4; - if (cmd == VIDIOC_DBG_G_REGISTER) - regs->val = cx18_read_enc(cx, regs->reg); - else + if (cmd == VIDIOC_DBG_S_REGISTER) cx18_write_enc(cx, regs->val, regs->reg); + else + regs->val = cx18_read_enc(cx, regs->reg); return 0; } @@ -408,7 +445,8 @@ static int cx18_g_register(struct file *file, void *fh, if (v4l2_chip_match_host(®->match)) return cx18_cxc(cx, VIDIOC_DBG_G_REGISTER, reg); - cx18_call_i2c_clients(cx, VIDIOC_DBG_G_REGISTER, reg); + /* FIXME - errors shouldn't be ignored */ + cx18_call_all(cx, core, g_register, reg); return 0; } @@ -419,7 +457,8 @@ static int cx18_s_register(struct file *file, void *fh, if (v4l2_chip_match_host(®->match)) return cx18_cxc(cx, VIDIOC_DBG_S_REGISTER, reg); - cx18_call_i2c_clients(cx, VIDIOC_DBG_S_REGISTER, reg); + /* FIXME - errors shouldn't be ignored */ + cx18_call_all(cx, core, s_register, reg); return 0; } #endif @@ -598,7 +637,7 @@ static int cx18_g_frequency(struct file *file, void *fh, if (vf->tuner != 0) return -EINVAL; - cx18_call_i2c_clients(cx, VIDIOC_G_FREQUENCY, vf); + cx18_call_all(cx, tuner, g_frequency, vf); return 0; } @@ -617,7 +656,7 @@ int cx18_s_frequency(struct file *file, void *fh, struct v4l2_frequency *vf) cx18_mute(cx); CX18_DEBUG_INFO("v4l2 ioctl: set frequency %d\n", vf->frequency); - cx18_call_i2c_clients(cx, VIDIOC_S_FREQUENCY, vf); + cx18_call_all(cx, tuner, s_frequency, vf); cx18_unmute(cx); return 0; } @@ -666,7 +705,7 @@ int cx18_s_std(struct file *file, void *fh, v4l2_std_id *std) (unsigned long long) cx->std); /* Tuner */ - cx18_call_i2c_clients(cx, VIDIOC_S_STD, &cx->std); + cx18_call_all(cx, tuner, s_std, cx->std); return 0; } @@ -683,9 +722,7 @@ static int cx18_s_tuner(struct file *file, void *fh, struct v4l2_tuner *vt) if (vt->index != 0) return -EINVAL; - /* Setting tuner can only set audio mode */ - cx18_call_i2c_clients(cx, VIDIOC_S_TUNER, vt); - + cx18_call_all(cx, tuner, s_tuner, vt); return 0; } @@ -696,7 +733,7 @@ static int cx18_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt) if (vt->index != 0) return -EINVAL; - cx18_call_i2c_clients(cx, VIDIOC_G_TUNER, vt); + cx18_call_all(cx, tuner, g_tuner, vt); if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) { strlcpy(vt->name, "cx18 Radio Tuner", sizeof(vt->name)); @@ -853,7 +890,7 @@ static int cx18_log_status(struct file *file, void *fh) cx18_read_eeprom(cx, &tv); } - cx18_call_i2c_clients(cx, VIDIOC_LOG_STATUS, NULL); + cx18_call_all(cx, core, log_status); cx18_get_input(cx, cx->active_input, &vidin); cx18_get_audio_input(cx, cx->audio_input, &audin); CX18_INFO("Video Input: %s\n", vidin.name); @@ -894,7 +931,8 @@ static long cx18_default(struct file *file, void *fh, int cmd, void *arg) CX18_DEBUG_IOCTL("VIDIOC_INT_S_AUDIO_ROUTING(%d, %d)\n", route->input, route->output); - cx18_audio_set_route(cx, route); + cx18_call_hw(cx, cx->card->hw_audio_ctrl, audio, s_routing, + route); break; } @@ -922,6 +960,8 @@ long cx18_v4l2_ioctl(struct file *filp, unsigned int cmd, mutex_lock(&cx->serialize_lock); + /* FIXME - consolidate v4l2_prio_check()'s here */ + if (cx18_debug & CX18_DBGFLG_IOCTL) vfd->debug = V4L2_DEBUG_IOCTL | V4L2_DEBUG_IOCTL_ARG; res = video_ioctl2(filp, cmd, arg); |