aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-kirkwood/common.c5
-rw-r--r--arch/arm/mach-kirkwood/rd88f6281-setup.c13
-rw-r--r--arch/arm/mach-orion5x/common.c5
-rw-r--r--arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c9
-rw-r--r--arch/arm/mach-orion5x/rd88f5181l-ge-setup.c10
-rw-r--r--arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c10
-rw-r--r--arch/arm/mach-orion5x/wrt350n-v2-setup.c9
-rw-r--r--include/net/dsa.h42
-rw-r--r--net/dsa/dsa.c177
-rw-r--r--net/dsa/dsa_priv.h97
-rw-r--r--net/dsa/mv88e6060.c12
-rw-r--r--net/dsa/mv88e6123_61_65.c92
-rw-r--r--net/dsa/mv88e6131.c78
-rw-r--r--net/dsa/slave.c25
-rw-r--r--net/dsa/tag_dsa.c30
-rw-r--r--net/dsa/tag_edsa.c30
-rw-r--r--net/dsa/tag_trailer.c10
17 files changed, 443 insertions, 211 deletions
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index b3404b7..0d2074f 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -231,14 +231,17 @@ static struct platform_device kirkwood_switch_device = {
void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq)
{
+ int i;
+
if (irq != NO_IRQ) {
kirkwood_switch_resources[0].start = irq;
kirkwood_switch_resources[0].end = irq;
kirkwood_switch_device.num_resources = 1;
}
- d->mii_bus = &kirkwood_ge00_shared.dev;
d->netdev = &kirkwood_ge00.dev;
+ for (i = 0; i < d->nr_chips; i++)
+ d->chip[i].mii_bus = &kirkwood_ge00_shared.dev;
kirkwood_switch_device.dev.platform_data = d;
platform_device_register(&kirkwood_switch_device);
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 9a0e905..e1c0516 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -75,7 +75,7 @@ static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
.duplex = DUPLEX_FULL,
};
-static struct dsa_platform_data rd88f6281_switch_data = {
+static struct dsa_chip_data rd88f6281_switch_chip_data = {
.port_names[0] = "lan1",
.port_names[1] = "lan2",
.port_names[2] = "lan3",
@@ -83,6 +83,11 @@ static struct dsa_platform_data rd88f6281_switch_data = {
.port_names[5] = "cpu",
};
+static struct dsa_platform_data rd88f6281_switch_plat_data = {
+ .nr_chips = 1,
+ .chip = &rd88f6281_switch_chip_data,
+};
+
static struct mv643xx_eth_platform_data rd88f6281_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(11),
};
@@ -105,12 +110,12 @@ static void __init rd88f6281_init(void)
kirkwood_ge00_init(&rd88f6281_ge00_data);
kirkwood_pcie_id(&dev, &rev);
if (rev == MV88F6281_REV_A0) {
- rd88f6281_switch_data.sw_addr = 10;
+ rd88f6281_switch_chip_data.sw_addr = 10;
kirkwood_ge01_init(&rd88f6281_ge01_data);
} else {
- rd88f6281_switch_data.port_names[4] = "wan";
+ rd88f6281_switch_chip_data.port_names[4] = "wan";
}
- kirkwood_ge00_switch_init(&rd88f6281_switch_data, NO_IRQ);
+ kirkwood_ge00_switch_init(&rd88f6281_switch_plat_data, NO_IRQ);
kirkwood_rtc_init();
kirkwood_sata_init(&rd88f6281_sata_data);
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 0a62337..a4ecf62 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -219,14 +219,17 @@ static struct platform_device orion5x_switch_device = {
void __init orion5x_eth_switch_init(struct dsa_platform_data *d, int irq)
{
+ int i;
+
if (irq != NO_IRQ) {
orion5x_switch_resources[0].start = irq;
orion5x_switch_resources[0].end = irq;
orion5x_switch_device.num_resources = 1;
}
- d->mii_bus = &orion5x_eth_shared.dev;
d->netdev = &orion5x_eth.dev;
+ for (i = 0; i < d->nr_chips; i++)
+ d->chip[i].mii_bus = &orion5x_eth_shared.dev;
orion5x_switch_device.dev.platform_data = d;
platform_device_register(&orion5x_switch_device);
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 15f5323..9c1ca41 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -94,7 +94,7 @@ static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
.duplex = DUPLEX_FULL,
};
-static struct dsa_platform_data rd88f5181l_fxo_switch_data = {
+static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = {
.port_names[0] = "lan2",
.port_names[1] = "lan1",
.port_names[2] = "wan",
@@ -103,6 +103,11 @@ static struct dsa_platform_data rd88f5181l_fxo_switch_data = {
.port_names[7] = "lan3",
};
+static struct dsa_platform_data rd88f5181l_fxo_switch_plat_data = {
+ .nr_chips = 1,
+ .chip = &rd88f5181l_fxo_switch_chip_data,
+};
+
static void __init rd88f5181l_fxo_init(void)
{
/*
@@ -117,7 +122,7 @@ static void __init rd88f5181l_fxo_init(void)
*/
orion5x_ehci0_init();
orion5x_eth_init(&rd88f5181l_fxo_eth_data);
- orion5x_eth_switch_init(&rd88f5181l_fxo_switch_data, NO_IRQ);
+ orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ);
orion5x_uart0_init();
orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 8ad3934..ee1399f 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -95,7 +95,7 @@ static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
.duplex = DUPLEX_FULL,
};
-static struct dsa_platform_data rd88f5181l_ge_switch_data = {
+static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = {
.port_names[0] = "lan2",
.port_names[1] = "lan1",
.port_names[2] = "wan",
@@ -104,6 +104,11 @@ static struct dsa_platform_data rd88f5181l_ge_switch_data = {
.port_names[7] = "lan3",
};
+static struct dsa_platform_data rd88f5181l_ge_switch_plat_data = {
+ .nr_chips = 1,
+ .chip = &rd88f5181l_ge_switch_chip_data,
+};
+
static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
I2C_BOARD_INFO("ds1338", 0x68),
};
@@ -122,7 +127,8 @@ static void __init rd88f5181l_ge_init(void)
*/
orion5x_ehci0_init();
orion5x_eth_init(&rd88f5181l_ge_eth_data);
- orion5x_eth_switch_init(&rd88f5181l_ge_switch_data, gpio_to_irq(8));
+ orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data,
+ gpio_to_irq(8));
orion5x_i2c_init();
orion5x_uart0_init();
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 262e25e..7737cf9 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -35,7 +35,7 @@ static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
.duplex = DUPLEX_FULL,
};
-static struct dsa_platform_data rd88f6183ap_ge_switch_data = {
+static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = {
.port_names[0] = "lan1",
.port_names[1] = "lan2",
.port_names[2] = "lan3",
@@ -44,6 +44,11 @@ static struct dsa_platform_data rd88f6183ap_ge_switch_data = {
.port_names[5] = "cpu",
};
+static struct dsa_platform_data rd88f6183ap_ge_switch_plat_data = {
+ .nr_chips = 1,
+ .chip = &rd88f6183ap_ge_switch_chip_data,
+};
+
static struct mtd_partition rd88f6183ap_ge_partitions[] = {
{
.name = "kernel",
@@ -89,7 +94,8 @@ static void __init rd88f6183ap_ge_init(void)
*/
orion5x_ehci0_init();
orion5x_eth_init(&rd88f6183ap_ge_eth_data);
- orion5x_eth_switch_init(&rd88f6183ap_ge_switch_data, gpio_to_irq(3));
+ orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data,
+ gpio_to_irq(3));
spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
orion5x_spi_init();
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index cc8f892..1b4ad9d 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -106,7 +106,7 @@ static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
.duplex = DUPLEX_FULL,
};
-static struct dsa_platform_data wrt350n_v2_switch_data = {
+static struct dsa_chip_data wrt350n_v2_switch_chip_data = {
.port_names[0] = "lan2",
.port_names[1] = "lan1",
.port_names[2] = "wan",
@@ -115,6 +115,11 @@ static struct dsa_platform_data wrt350n_v2_switch_data = {
.port_names[7] = "lan4",
};
+static struct dsa_platform_data wrt350n_v2_switch_plat_data = {
+ .nr_chips = 1,
+ .chip = &wrt350n_v2_switch_chip_data,
+};
+
static void __init wrt350n_v2_init(void)
{
/*
@@ -129,7 +134,7 @@ static void __init wrt350n_v2_init(void)
*/
orion5x_ehci0_init();
orion5x_eth_init(&wrt350n_v2_eth_data);
- orion5x_eth_switch_init(&wrt350n_v2_switch_data, NO_IRQ);
+ orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ);
orion5x_uart0_init();
orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 52e97bf..839f768 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -1,6 +1,6 @@
/*
* include/net/dsa.h - Driver for Distributed Switch Architecture switch chips
- * Copyright (c) 2008 Marvell Semiconductor
+ * Copyright (c) 2008-2009 Marvell Semiconductor
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -11,23 +11,47 @@
#ifndef __LINUX_NET_DSA_H
#define __LINUX_NET_DSA_H
-#define DSA_MAX_PORTS 12
+#define DSA_MAX_SWITCHES 4
+#define DSA_MAX_PORTS 12
+
+struct dsa_chip_data {
+ /*
+ * How to access the switch configuration registers.
+ */
+ struct device *mii_bus;
+ int sw_addr;
+
+ /*
+ * The names of the switch's ports. Use "cpu" to
+ * designate the switch port that the cpu is connected to,
+ * "dsa" to indicate that this port is a DSA link to
+ * another switch, NULL to indicate the port is unused,
+ * or any other string to indicate this is a physical port.
+ */
+ char *port_names[DSA_MAX_PORTS];
+
+ /*
+ * An array (with nr_chips elements) of which element [a]
+ * indicates which port on this switch should be used to
+ * send packets to that are destined for switch a. Can be
+ * NULL if there is only one switch chip.
+ */
+ s8 *rtable;
+};
struct dsa_platform_data {
/*
* Reference to a Linux network interface that connects
- * to the switch chip.
+ * to the root switch chip of the tree.
*/
struct device *netdev;
/*
- * How to access the switch configuration registers, and
- * the names of the switch ports (use "cpu" to designate
- * the switch port that the cpu is connected to).
+ * Info structs describing each of the switch chips
+ * connected via this network interface.
*/
- struct device *mii_bus;
- int sw_addr;
- char *port_names[DSA_MAX_PORTS];
+ int nr_chips;
+ struct dsa_chip_data *chip;
};
extern bool dsa_uses_dsa_tags(void *dsa_ptr);
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index 33e9946..71489f6 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -1,6 +1,6 @@
/*
* net/dsa/dsa.c - Hardware switch handling
- * Copyright (c) 2008 Marvell Semiconductor
+ * Copyright (c) 2008-2009 Marvell Semiconductor
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -67,12 +67,13 @@ dsa_switch_probe(struct mii_bus *bus, int sw_addr, char **_name)
/* basic switch operations **************************************************/
static struct dsa_switch *
-dsa_switch_setup(struct device *parent, struct dsa_platform_data *pd,
- struct mii_bus *bus, struct net_device *dev)
+dsa_switch_setup(struct dsa_switch_tree *dst, int index,
+ struct device *parent, struct mii_bus *bus)
{
+ struct dsa_chip_data *pd = dst->pd->chip + index;
+ struct dsa_switch_driver *drv;
struct dsa_switch *ds;
int ret;
- struct dsa_switch_driver *drv;
char *name;
int i;
@@ -81,11 +82,12 @@ dsa_switch_setup(struct device *parent, struct dsa_platform_data *pd,
*/
drv = dsa_switch_probe(bus, pd->sw_addr, &name);
if (drv == NULL) {
- printk(KERN_ERR "%s: could not detect attached switch\n",
- dev->name);
+ printk(KERN_ERR "%s[%d]: could not detect attached switch\n",
+ dst->master_netdev->name, index);
return ERR_PTR(-EINVAL);
}
- printk(KERN_INFO "%s: detected a %s switch\n", dev->name, name);
+ printk(KERN_INFO "%s[%d]: detected a %s switch\n",
+ dst->master_netdev->name, index, name);
/*
@@ -95,18 +97,16 @@ dsa_switch_setup(struct device *parent, struct dsa_platform_data *pd,
if (ds == NULL)
return ERR_PTR(-ENOMEM);
- ds->pd = pd;
- ds->master_netdev = dev;
- ds->master_mii_bus = bus;
-
+ ds->dst = dst;
+ ds->index = index;
+ ds->pd = dst->pd->chip + index;
ds->drv = drv;
- ds->tag_protocol = drv->tag_protocol;
+ ds->master_mii_bus = bus;
/*
* Validate supplied switch configuration.
*/
- ds->cpu_port = -1;
for (i = 0; i < DSA_MAX_PORTS; i++) {
char *name;
@@ -115,32 +115,28 @@ dsa_switch_setup(struct device *parent, struct dsa_platform_data *pd,
continue;
if (!strcmp(name, "cpu")) {
- if (ds->cpu_port != -1) {
+ if (dst->cpu_switch != -1) {
printk(KERN_ERR "multiple cpu ports?!\n");
ret = -EINVAL;
goto out;
}
- ds->cpu_port = i;
+ dst->cpu_switch = index;
+ dst->cpu_port = i;
+ } else if (!strcmp(name, "dsa")) {
+ ds->dsa_port_mask |= 1 << i;
} else {
- ds->valid_port_mask |= 1 << i;
+ ds->phys_port_mask |= 1 << i;
}
}
- if (ds->cpu_port == -1) {
- printk(KERN_ERR "no cpu port?!\n");
- ret = -EINVAL;
- goto out;
- }
-
/*
- * If we use a tagging format that doesn't have an ethertype
- * field, make sure that all packets from this point on get
- * sent to the tag format's receive function. (Which will
- * discard received packets until we set ds->ports[] below.)
+ * If the CPU connects to this switch, set the switch tree
+ * tagging protocol to the preferred tagging format of this
+ * switch.
*/
- wmb();
- dev->dsa_ptr = (void *)ds;
+ if (ds->dst->cpu_switch == index)
+ ds->dst->tag_protocol = drv->tag_protocol;
/*
@@ -150,7 +146,7 @@ dsa_switch_setup(struct device *parent, struct dsa_platform_data *pd,
if (ret < 0)
goto out;
- ret = drv->set_addr(ds, dev->dev_addr);
+ ret = drv->set_addr(ds, dst->master_netdev->dev_addr);
if (ret < 0)
goto out;
@@ -169,18 +165,18 @@ dsa_switch_setup(struct device *parent, struct dsa_platform_data *pd,
/*
* Create network devices for physical switch ports.
*/
- wmb();
for (i = 0; i < DSA_MAX_PORTS; i++) {
struct net_device *slave_dev;
- if (!(ds->valid_port_mask & (1 << i)))
+ if (!(ds->phys_port_mask & (1 << i)))
continue;
slave_dev = dsa_slave_create(ds, parent, i, pd->port_names[i]);
if (slave_dev == NULL) {
- printk(KERN_ERR "%s: can't create dsa slave "
- "device for port %d(%s)\n",
- dev->name, i, pd->port_names[i]);
+ printk(KERN_ERR "%s[%d]: can't create dsa "
+ "slave device for port %d(%s)\n",
+ dst->master_netdev->name,
+ index, i, pd->port_names[i]);
continue;
}
@@ -192,7 +188,6 @@ dsa_switch_setup(struct device *parent, struct dsa_platform_data *pd,
out_free:
mdiobus_free(ds->slave_mii_bus);
out:
- dev->dsa_ptr = NULL;
kfree(ds);
return ERR_PTR(ret);
}
@@ -212,35 +207,42 @@ static void dsa_switch_destroy(struct dsa_switch *ds)
*/
bool dsa_uses_dsa_tags(void *dsa_ptr)
{
- struct dsa_switch *ds = dsa_ptr;
+ struct dsa_switch_tree *dst = dsa_ptr;
- return !!(ds->tag_protocol == htons(ETH_P_DSA));
+ return !!(dst->tag_protocol == htons(ETH_P_DSA));
}
bool dsa_uses_trailer_tags(void *dsa_ptr)
{
- struct dsa_switch *ds = dsa_ptr;
+ struct dsa_switch_tree *dst = dsa_ptr;
- return !!(ds->tag_protocol == htons(ETH_P_TRAILER));
+ return !!(dst->tag_protocol == htons(ETH_P_TRAILER));
}
/* link polling *************************************************************/
static void dsa_link_poll_work(struct work_struct *ugly)
{
- struct dsa_switch *ds;
+ struct dsa_switch_tree *dst;
+ int i;
+
+ dst = container_of(ugly, struct dsa_switch_tree, link_poll_work);
- ds = container_of(ugly, struct dsa_switch, link_poll_work);
+ for (i = 0; i < dst->pd->nr_chips; i++) {
+ struct dsa_switch *ds = dst->ds[i];
- ds->drv->poll_link(ds);
- mod_timer(&ds->link_poll_timer, round_jiffies(jiffies + HZ));
+ if (ds != NULL && ds->drv->poll_link != NULL)
+ ds->drv->poll_link(ds);
+ }
+
+ mod_timer(&dst->link_poll_timer, round_jiffies(jiffies + HZ));
}
-static void dsa_link_poll_timer(unsigned long _ds)
+static void dsa_link_poll_timer(unsigned long _dst)
{
- struct dsa_switch *ds = (void *)_ds;
+ struct dsa_switch_tree *dst = (void *)_dst;
- schedule_work(&ds->link_poll_work);
+ schedule_work(&dst->link_poll_work);
}
@@ -303,18 +305,14 @@ static int dsa_probe(struct platform_device *pdev)
static int dsa_version_printed;
struct dsa_platform_data *pd = pdev->dev.platform_data;
struct net_device *dev;
- struct mii_bus *bus;
- struct dsa_switch *ds;
+ struct dsa_switch_tree *dst;
+ int i;
if (!dsa_version_printed++)
printk(KERN_NOTICE "Distributed Switch Architecture "
"driver version %s\n", dsa_driver_version);
- if (pd == NULL || pd->mii_bus == NULL || pd->netdev == NULL)
- return -EINVAL;
-
- bus = dev_to_mii_bus(pd->mii_bus);
- if (bus == NULL)
+ if (pd == NULL || pd->netdev == NULL)
return -EINVAL;
dev = dev_to_net_device(pd->netdev);
@@ -326,36 +324,79 @@ static int dsa_probe(struct platform_device *pdev)
return -EEXIST;
}
- ds = dsa_switch_setup(&pdev->dev, pd, bus, dev);
- if (IS_ERR(ds)) {
+ dst = kzalloc(sizeof(*dst), GFP_KERNEL);
+ if (dst == NULL) {
dev_put(dev);
- return PTR_ERR(ds);
+ return -ENOMEM;
}
- if (ds->drv->poll_link != NULL) {
- INIT_WORK(&ds->link_poll_work, dsa_link_poll_work);
- init_timer(&ds->link_poll_timer);
- ds->link_poll_timer.data = (unsigned long)ds;
- ds->link_poll_timer.function = dsa_link_poll_timer;
- ds->link_poll_timer.expires = round_jiffies(jiffies + HZ);
- add_timer(&ds->link_poll_timer);
+ platform_set_drvdata(pdev, dst);
+
+ dst->pd = pd;
+ dst->master_netdev = dev;
+ dst->cpu_switch = -1;
+ dst->cpu_port = -1;
+
+ for (i = 0; i < pd->nr_chips; i++) {
+ struct mii_bus *bus;
+ struct dsa_switch *ds;
+
+ bus = dev_to_mii_bus(pd->chip[i].mii_bus);
+ if (bus == NULL) {
+ printk(KERN_ERR "%s[%d]: no mii bus found for "
+ "dsa switch\n", dev->name, i);
+ continue;
+ }
+
+ ds = dsa_switch_setup(dst, i, &pdev->dev, bus);
+ if (IS_ERR(ds)) {
+ printk(KERN_ERR "%s[%d]: couldn't create dsa switch "
+ "instance (error %ld)\n", dev->name, i,
+ PTR_ERR(ds));
+ continue;
+ }
+
+ dst->ds[i] = ds;
+ if (ds->drv->poll_link != NULL)
+ dst->link_poll_needed = 1;
}
- platform_set_drvdata(pdev, ds);
+ /*
+ * If we use a tagging format that doesn't have an ethertype
+ * field, make sure that all packets from this point on get
+ * sent to the tag format's receive function.
+ */
+ wmb();
+ dev->dsa_ptr = (void *)dst;
+
+ if (dst->link_poll_needed) {
+ INIT_WORK(&dst->link_poll_work, dsa_link_poll_work);
+ init_timer(&dst->link_poll_timer);
+ dst->link_poll_timer.data = (unsigned long)dst;
+ dst->link_poll_timer.function = dsa_link_poll_timer;
+ dst->link_poll_timer.expires = round_jiffies(jiffies + HZ);
+ add_timer(&dst->link_poll_timer);
+ }
return 0;
}
static int dsa_remove(struct platform_device *pdev)
{
- struct dsa_switch *ds = platform_get_drvdata(pdev);
+ struct dsa_switch_tree *dst = platform_get_drvdata(pdev);
+ int i;
- if (ds->drv->poll_link != NULL)
- del_timer_sync(&ds->link_poll_timer);
+ if (dst->link_poll_needed)
+ del_timer_sync(&dst->link_poll_timer);
flush_scheduled_work();
- dsa_switch_destroy(ds);
+ for (i = 0; i < dst->pd->nr_chips; i++) {
+ struct dsa_switch *ds = dst->ds[i];
+
+ if (ds != NULL)
+ dsa_switch_destroy(ds);
+ }
return 0;
}
diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
index 7063378..41055f3 100644
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -1,6 +1,6 @@
/*
* net/dsa/dsa_priv.h - Hardware switch handling
- * Copyright (c) 2008 Marvell Semiconductor
+ * Copyright (c) 2008-2009 Marvell Semiconductor
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -19,42 +19,107 @@
struct dsa_switch {
/*
- * Configuration data for the platform device that owns
- * this dsa switch instance.
+ * Parent switch tree, and switch index.
*/
- struct dsa_platform_data *pd;
+ struct dsa_switch_tree *dst;
+ int index;
/*
- * References to network device and mii bus to use.
+ * Configuration data for this switch.
*/
- struct net_device *master_netdev;
- struct mii_bus *master_mii_bus;
+ struct dsa_chip_data *pd;
/*
- * The used switch driver and frame tagging type.
+ * The used switch driver.
*/
struct dsa_switch_driver *drv;
- __be16 tag_protocol;
+
+ /*
+ * Reference to mii bus to use.
+ */
+ struct mii_bus *master_mii_bus;
/*
* Slave mii_bus and devices for the individual ports.
*/
- int cpu_port;
- u32 valid_port_mask;
- struct mii_bus *slave_mii_bus;
- struct net_device *ports[DSA_MAX_PORTS];
+ u32 dsa_port_mask;
+ u32 phys_port_mask;
+ struct mii_bus *slave_mii_bus;
+ struct net_device *ports[DSA_MAX_PORTS];
+};
+
+struct dsa_switch_tree {
+ /*
+ * Configuration data for the platform device that owns
+ * this dsa switch tree instance.
+ */
+ struct dsa_platform_data *pd;
+
+ /*
+ * Reference to network device to use, and which tagging
+ * protocol to use.
+ */
+ struct net_device *master_netdev;
+ __be16 tag_protocol;
+
+ /*
+ * The switch and port to which the CPU is attached.
+ */
+ s8 cpu_switch;
+ s8 cpu_port;
/*
* Link state polling.
*/
- struct work_struct link_poll_work;
- struct timer_list link_poll_timer;
+ int link_poll_needed;
+ struct work_struct link_poll_work;
+ struct timer_list link_poll_timer;
+
+ /*
+ * Data for the individual switch chips.
+ */
+ struct dsa_switch *ds[DSA_MAX_SWITCHES];
};
+static inline bool dsa_is_cpu_port(struct dsa_switch *ds, int p)
+{
+ return !!(ds->index == ds->dst->cpu_switch && p == ds->dst->cpu_port);
+}
+
+static inline u8 dsa_upstream_port(struct dsa_switch *ds)
+{
+ struct dsa_switch_tree *dst = ds->dst;
+
+ /*
+ * If this is the root switch (i.e. the switch that connects
+ * to the CPU), return the cpu port number on this switch.
+ * Else return the (DSA) port number that connects to the
+ * switch that is one hop closer to the cpu.
+ */
+ if (dst->cpu_switch == ds->index)
+ return dst->cpu_port;
+ else
+ return ds->pd->rtable[dst->cpu_switch];
+}
+
struct dsa_slave_priv {
+ /*
+ * The linux network interface corresponding to this
+ * switch port.
+ */
struct net_device *dev;
+
+ /*
+ * Which switch this port is a part of, and the port index
+ * for this port.
+ */
struct dsa_switch *parent;
- int port;
+ u8 port;
+
+ /*
+ * The phylib phy_device pointer for the PHY connected
+ * to this port.
+ */
struct phy_device *phy;
};
diff --git a/net/dsa/mv88e6060.c b/net/dsa/mv88e6060.c
index 85081ae..83277f4 100644
--- a/net/dsa/mv88e6060.c
+++ b/net/dsa/mv88e6060.c
@@ -1,6 +1,6 @@
/*
* net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
- * Copyright (c) 2008 Marvell Semiconductor
+ * Copyright (c) 2008-2009 Marvell Semiconductor
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -81,7 +81,7 @@ static int mv88e6060_switch_reset(struct dsa_switch *ds)
/*
* Reset the switch.
*/
- REG_WRITE(REG_GLOBAL, 0x0A, 0xa130);
+ REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);
/*
* Wait up to one second for reset to complete.
@@ -128,7 +128,7 @@ static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
* state to Forwarding. Additionally, if this is the CPU
* port, enable Ingress and Egress Trailer tagging mode.
*/
- REG_WRITE(addr, 0x04, (p == ds->cpu_port) ? 0x4103 : 0x0003);
+ REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ? 0x4103 : 0x0003);
/*
* Port based VLAN map: give each port its own address
@@ -138,9 +138,9 @@ static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
*/
REG_WRITE(addr, 0x06,
((p & 0xf) << 12) |
- ((p == ds->cpu_port) ?
- ds->valid_port_mask :
- (1 << ds->cpu_port)));
+ (dsa_is_cpu_port(ds, p) ?
+ ds->phys_port_mask :
+ (1 << ds->dst->cpu_port)));
/*
* Port Association Vector: when learning source addresses
diff --git a/net/dsa/mv88e6123_61_65.c b/net/dsa/mv88e6123_61_65.c
index 1003187..52faaa2 100644
--- a/net/dsa/mv88e6123_61_65.c
+++ b/net/dsa/mv88e6123_61_65.c
@@ -1,6 +1,6 @@
/*
* net/dsa/mv88e6123_61_65.c - Marvell 88e6123/6161/6165 switch chip support
- * Copyright (c) 2008 Marvell Semiconductor
+ * Copyright (c) 2008-2009 Marvell Semiconductor
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -98,17 +98,17 @@ static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
return ret;
/*
- * Configure the cpu port, and configure the cpu port as the
- * port to which ingress and egress monitor frames are to be
- * sent.
+ * Configure the upstream port, and configure the upstream
+ * port as the port to which ingress and egress monitor frames
+ * are to be sent.
*/
- REG_WRITE(REG_GLOBAL, 0x1a, (ds->cpu_port * 0x1110));
+ REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110));
/*
* Disable remote management for now, and set the switch's
- * DSA device number to zero.
+ * DSA device number.
*/
- REG_WRITE(REG_GLOBAL, 0x1c, 0x0000);
+ REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);
/*
* Send all frames with destination addresses matching
@@ -133,10 +133,17 @@ static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
/*
- * Map all DSA device IDs to the CPU port.
+ * Program the DSA routing table.
*/
- for (i = 0; i < 32; i++)
- REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | ds->cpu_port);
+ for (i = 0; i < 32; i++) {
+ int nexthop;
+
+ nexthop = 0x1f;
+ if (i != ds->index && i < ds->dst->pd->nr_chips)
+ nexthop = ds->pd->rtable[i] & 0x1f;
+
+ REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
+ }
/*
* Clear all trunk masks.
@@ -176,12 +183,18 @@ static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
{
int addr = REG_PORT(p);
+ u16 val;
/*
* MAC Forcing register: don't force link, speed, duplex
- * or flow control state to any particular values.
+ * or flow control state to any particular values on physical
+ * ports, but force the CPU port and all DSA ports to 1000 Mb/s
+ * full duplex.
*/
- REG_WRITE(addr, 0x01, 0x0003);
+ if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
+ REG_WRITE(addr, 0x01, 0x003e);
+ else
+ REG_WRITE(addr, 0x01, 0x0003);
/*
* Do not limit the period of time that this port can be
@@ -192,37 +205,50 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
/*
* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
- * configure the requested (DSA/EDSA) tagging mode if this is
- * the CPU port, disable Header mode, enable IGMP/MLD snooping,
- * disable VLAN tunneling, determine priority by looking at
- * 802.1p and IP priority fields (IP prio has precedence), and
- * set STP state to Forwarding. Finally, if this is the CPU
- * port, additionally enable forwarding of unknown unicast and
- * multicast addresses.
- */
- REG_WRITE(addr, 0x04,
- (p == ds->cpu_port) ?
- (ds->tag_protocol == htons(ETH_P_DSA)) ?
- 0x053f : 0x373f :
- 0x0433);
+ * disable Header mode, enable IGMP/MLD snooping, disable VLAN
+ * tunneling, determine priority by looking at 802.1p and IP
+ * priority fields (IP prio has precedence), and set STP state
+ * to Forwarding.
+ *
+ * If this is the CPU link, use DSA or EDSA tagging depending
+ * on which tagging mode was configured.
+ *
+ * If this is a link to another switch, use DSA tagging mode.
+ *
+ * If this is the upstream port for this switch, enable
+ * forwarding of unknown unicasts and multicasts.
+ */
+ val = 0x0433;
+ if (dsa_is_cpu_port(ds, p)) {
+ if (ds->dst->tag_protocol == htons(ETH_P_EDSA))
+ val |= 0x3300;
+ else
+ val |= 0x0100;
+ }
+ if (ds->dsa_port_mask & (1 << p))
+ val |= 0x0100;
+ if (p == dsa_upstream_port(ds))
+ val |= 0x000c;
+ REG_WRITE(addr, 0x04, val);
/*
* Port Control 1: disable trunking. Also, if this is the
* CPU port, enable learn messages to be sent to this port.
*/
- REG_WRITE(addr, 0x05, (p == ds->cpu_port) ? 0x8000 : 0x0000);
+ REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000);
/*
* Port based VLAN map: give each port its own address
* database, allow the CPU port to talk to each of the 'real'
* ports, and allow each of the 'real' ports to only talk to
- * the CPU port.
- */
- REG_WRITE(addr, 0x06,
- ((p & 0xf) << 12) |
- ((p == ds->cpu_port) ?
- ds->valid_port_mask :
- (1 << ds->cpu_port)));
+ * the upstream port.
+ */
+ val = (p & 0xf) << 12;
+ if (dsa_is_cpu_port(ds, p))
+ val |= ds->phys_port_mask;
+ else
+ val |= 1 << dsa_upstream_port(ds);
+ REG_WRITE(addr, 0x06, val);
/*
* Default VLAN ID and priority: don't set a default VLAN
diff --git a/net/dsa/mv88e6131.c b/net/dsa/mv88e6131.c
index 0029957..bb2b41b 100644
--- a/net/dsa/mv88e6131.c
+++ b/net/dsa/mv88e6131.c
@@ -102,17 +102,17 @@ static int mv88e6131_setup_global(struct dsa_switch *ds)
REG_WRITE(REG_GLOBAL, 0x19, 0x8100);
/*
- * Disable ARP mirroring, and configure the cpu port as the
- * port to which ingress and egress monitor frames are to be
- * sent.
+ * Disable ARP mirroring, and configure the upstream port as
+ * the port to which ingress and egress monitor frames are to
+ * be sent.
*/
- REG_WRITE(REG_GLOBAL, 0x1a, (ds->cpu_port * 0x1100) | 0x00f0);
+ REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1100) | 0x00f0);
/*
* Disable cascade port functionality, and set the switch's
- * DSA device number to zero.
+ * DSA device number.
*/
- REG_WRITE(REG_GLOBAL, 0x1c, 0xe000);
+ REG_WRITE(REG_GLOBAL, 0x1c, 0xe000 | (ds->index & 0x1f));
/*
* Send all frames with destination addresses matching
@@ -129,10 +129,17 @@ static int mv88e6131_setup_global(struct dsa_switch *ds)
REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
/*
- * Map all DSA device IDs to the CPU port.
+ * Program the DSA routing table.
*/
- for (i = 0; i < 32; i++)
- REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | ds->cpu_port);
+ for (i = 0; i < 32; i++) {
+ int nexthop;
+
+ nexthop = 0x1f;
+ if (i != ds->index && i < ds->dst->pd->nr_chips)
+ nexthop = ds->pd->rtable[i] & 0x1f;
+
+ REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
+ }
/*
* Clear all trunk masks.
@@ -158,13 +165,15 @@ static int mv88e6131_setup_global(struct dsa_switch *ds)
static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
{
int addr = REG_PORT(p);
+ u16 val;
/*
* MAC Forcing register: don't force link, speed, duplex
* or flow control state to any particular values on physical
- * ports, but force the CPU port to 1000 Mb/s full duplex.
+ * ports, but force the CPU port and all DSA ports to 1000 Mb/s
+ * full duplex.
*/
- if (p == ds->cpu_port)
+ if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
REG_WRITE(addr, 0x01, 0x003e);
else
REG_WRITE(addr, 0x01, 0x0003);
@@ -175,29 +184,40 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
* enable IGMP/MLD snoop, disable DoubleTag, disable VLAN
* tunneling, determine priority by looking at 802.1p and
* IP priority fields (IP prio has precedence), and set STP
- * state to Forwarding. Finally, if this is the CPU port,
- * additionally enable DSA tagging and forwarding of unknown
- * unicast addresses.
+ * state to Forwarding.
+ *
+ * If this is the upstream port for this switch, enable
+ * forwarding of unknown unicasts, and enable DSA tagging
+ * mode.
+ *
+ * If this is the link to another switch, use DSA tagging
+ * mode, but do not enable forwarding of unknown unicasts.
*/
- REG_WRITE(addr, 0x04, (p == ds->cpu_port) ? 0x0537 : 0x0433);
+ val = 0x0433;
+ if (p == dsa_upstream_port(ds))
+ val |= 0x0104;
+ if (ds->dsa_port_mask & (1 << p))
+ val |= 0x0100;
+ REG_WRITE(addr, 0x04, val);
/*
* Port Control 1: disable trunking. Also, if this is the
* CPU port, enable learn messages to be sent to this port.
*/
- REG_WRITE(addr, 0x05, (p == ds->cpu_port) ? 0x8000 : 0x0000);
+ REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000);
/*
* Port based VLAN map: give each port its own address
* database, allow the CPU port to talk to each of the 'real'
* ports, and allow each of the 'real' ports to only talk to
- * the CPU port.
+ * the upstream port.
*/
- REG_WRITE(addr, 0x06,
- ((p & 0xf) << 12) |
- ((p == ds->cpu_port) ?
- ds->valid_port_mask :
- (1 << ds->cpu_port)));
+ val = (p & 0xf) << 12;
+ if (dsa_is_cpu_port(ds, p))
+ val |= ds->phys_port_mask;
+ else
+ val |= 1 << dsa_upstream_port(ds);
+ REG_WRITE(addr, 0x06, val);
/*
* Default VLAN ID and priority: don't set a default VLAN
@@ -213,13 +233,15 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
* untagged frames on this port, do a destination address
* lookup on received packets as usual, don't send a copy
* of all transmitted/received frames on this port to the
- * CPU, and configure the CPU port number. Also, if this
- * is the CPU port, enable forwarding of unknown multicast
- * addresses.
+ * CPU, and configure the upstream port number.
+ *
+ * If this is the upstream port for this switch, enable
+ * forwarding of unknown multicast addresses.
*/
- REG_WRITE(addr, 0x08,
- ((p == ds->cpu_port) ? 0x00c0 : 0x0080) |
- ds->cpu_port);
+ val = 0x0080 | dsa_upstream_port(ds);
+ if (p == dsa_upstream_port(ds))
+ val |= 0x0040;
+ REG_WRITE(addr, 0x08, val);
/*
* Rate Control: disable ingress rate limiting.
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 99114e5..ed13118 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1,6 +1,6 @@
/*
* net/dsa/slave.c - Slave device handling
- * Copyright (c) 2008 Marvell Semiconductor
+ * Copyright (c) 2008-2009 Marvell Semiconductor
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -19,7 +19,7 @@ static int dsa_slave_phy_read(struct mii_bus *bus, int addr, int reg)
{
struct dsa_switch *ds = bus->priv;
- if (ds->valid_port_mask & (1 << addr))
+ if (ds->phys_port_mask & (1 << addr))
return ds->drv->phy_read(ds, addr, reg);
return 0xffff;
@@ -29,7 +29,7 @@ static int dsa_slave_phy_write(struct mii_bus *bus, int addr, int reg, u16 val)
{
struct dsa_switch *ds = bus->priv;
- if (ds->valid_port_mask & (1 << addr))
+ if (ds->phys_port_mask & (1 << addr))
return ds->drv->phy_write(ds, addr, reg, val);
return 0;
@@ -43,7 +43,7 @@ void dsa_slave_mii_bus_init(struct dsa_switch *ds)
ds->slave_mii_bus->write = dsa_slave_phy_write;
snprintf(ds->slave_mii_bus->id, MII_BUS_ID_SIZE, "%s:%.2x",
ds->master_mii_bus->id, ds->pd->sw_addr);
- ds->slave_mii_bus->parent = &(ds->master_mii_bus->dev);
+ ds->slave_mii_bus->parent = &ds->master_mii_bus->dev;
}
@@ -51,9 +51,8 @@ void dsa_slave_mii_bus_init(struct dsa_switch *ds)
static int dsa_slave_init(struct net_device *dev)
{
struct dsa_slave_priv *p = netdev_priv(dev);
- struct net_device *master = p->parent->master_netdev;
- dev->iflink = master->ifindex;
+ dev->iflink = p->parent->dst->master_netdev->ifindex;
return 0;
}
@@ -61,7 +60,7 @@ static int dsa_slave_init(struct net_device *dev)
static int dsa_slave_open(struct net_device *dev)
{
struct dsa_slave_priv *p = netdev_priv(dev);
- struct net_device *master = p->parent->master_netdev;
+ struct net_device *master = p->parent->dst->master_netdev;
int err;
if (!(master->flags & IFF_UP))
@@ -99,7 +98,7 @@ out:
static int dsa_slave_close(struct net_device *dev)
{
struct dsa_slave_priv *p = netdev_priv(dev);
- struct net_device *master = p->parent->master_netdev;
+ struct net_device *master = p->parent->dst->master_netdev;
dev_mc_unsync(master, dev);
dev_unicast_unsync(master, dev);
@@ -117,7 +116,7 @@ static int dsa_slave_close(struct net_device *dev)
static void dsa_slave_change_rx_flags(struct net_device *dev, int change)
{
struct dsa_slave_priv *p = netdev_priv(dev);
- struct net_device *master = p->parent->master_netdev;
+ struct net_device *master = p->parent->dst->master_netdev;
if (change & IFF_ALLMULTI)
dev_set_allmulti(master, dev->flags & IFF_ALLMULTI ? 1 : -1);
@@ -128,7 +127,7 @@ static void dsa_slave_change_rx_flags(struct net_device *dev, int change)
static void dsa_slave_set_rx_mode(struct net_device *dev)
{
struct dsa_slave_priv *p = netdev_priv(dev);
- struct net_device *master = p->parent->master_netdev;
+ struct net_device *master = p->parent->dst->master_netdev;
dev_mc_sync(master, dev);
dev_unicast_sync(master, dev);
@@ -137,7 +136,7 @@ static void dsa_slave_set_rx_mode(struct net_device *dev)
static int dsa_slave_set_mac_address(struct net_device *dev, void *a)
{
struct dsa_slave_priv *p = netdev_priv(dev);
- struct net_device *master = p->parent->master_netdev;
+ struct net_device *master = p->parent->dst->master_netdev;
struct sockaddr *addr = a;
int err;
@@ -341,7 +340,7 @@ struct net_device *
dsa_slave_create(struct dsa_switch *ds, struct device *parent,
int port, char *name)
{
- struct net_device *master = ds->master_netdev;
+ struct net_device *master = ds->dst->master_netdev;
struct net_device *slave_dev;
struct dsa_slave_priv *p;
int ret;
@@ -356,7 +355,7 @@ dsa_slave_create(struct dsa_switch *ds, struct device *parent,
memcpy(slave_dev->dev_addr, master->dev_addr, ETH_ALEN);
slave_dev->tx_queue_len = 0;
- switch (ds->tag_protocol) {
+ switch (ds->dst->tag_protocol) {
#ifdef CONFIG_NET_DSA_TAG_DSA
case htons(ETH_P_DSA):
slave_dev->netdev_ops = &dsa_netdev_ops;
diff --git a/net/dsa/tag_dsa.c b/net/dsa/tag_dsa.c
index 0b8a91d..8fa25ba 100644
--- a/net/dsa/tag_dsa.c
+++ b/net/dsa/tag_dsa.c
@@ -1,6 +1,6 @@
/*
* net/dsa/tag_dsa.c - (Non-ethertype) DSA tagging
- * Copyright (c) 2008 Marvell Semiconductor
+ * Copyright (c) 2008-2009 Marvell Semiconductor
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -36,7 +36,7 @@ int dsa_xmit(struct sk_buff *skb, struct net_device *dev)
* Construct tagged FROM_CPU DSA tag from 802.1q tag.
*/
dsa_header = skb->data + 2 * ETH_ALEN;
- dsa_header[0] = 0x60;
+ dsa_header[0] = 0x60 | p->parent->index;
dsa_header[1] = p->port << 3;
/*
@@ -57,7 +57,7 @@ int dsa_xmit(struct sk_buff *skb, struct net_device *dev)
* Construct untagged FROM_CPU DSA tag.
*/
dsa_header = skb->data + 2 * ETH_ALEN;
- dsa_header[0] = 0x40;
+ dsa_header[0] = 0x40 | p->parent->index;
dsa_header[1] = p->port << 3;
dsa_header[2] = 0x00;
dsa_header[3] = 0x00;
@@ -65,7 +65,7 @@ int dsa_xmit(struct sk_buff *skb, struct net_device *dev)
skb->protocol = htons(ETH_P_DSA);
- skb->dev = p->parent->master_netdev;
+ skb->dev = p->parent->dst->master_netdev;
dev_queue_xmit(skb);
return NETDEV_TX_OK;
@@ -78,11 +78,13 @@ out_free:
static int dsa_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt, struct net_device *orig_dev)
{
- struct dsa_switch *ds = dev->dsa_ptr;
+ struct dsa_switch_tree *dst = dev->dsa_ptr;
+ struct dsa_switch *ds;
u8 *dsa_header;
+ int source_device;
int source_port;
- if (unlikely(ds == NULL))
+ if (unlikely(dst == NULL))
goto out_drop;
skb = skb_unshare(skb, GFP_ATOMIC);
@@ -98,16 +100,24 @@ static int dsa_rcv(struct sk_buff *skb, struct net_device *dev,
dsa_header = skb->data - 2;
/*
- * Check that frame type is either TO_CPU or FORWARD, and
- * that the source device is zero.
+ * Check that frame type is either TO_CPU or FORWARD.
*/
- if ((dsa_header[0] & 0xdf) != 0x00 && (dsa_header[0] & 0xdf) != 0xc0)
+ if ((dsa_header[0] & 0xc0) != 0x00 && (dsa_header[0] & 0xc0) != 0xc0)
goto out_drop;
/*
- * Check that the source port is a registered DSA port.
+ * Determine source device and port.
*/
+ source_device = dsa_header[0] & 0x1f;
source_port = (dsa_header[1] >> 3) & 0x1f;
+
+ /*
+ * Check that the source device exists and that the source
+ * port is a registered DSA port.
+ */
+ if (source_device >= dst->pd->nr_chips)
+ goto out_drop;
+ ds = dst->ds[source_device];
if (source_port >= DSA_MAX_PORTS || ds->ports[source_port] == NULL)
goto out_drop;
diff --git a/net/dsa/tag_edsa.c b/net/dsa/tag_edsa.c
index 16fcb6d..815607b 100644
--- a/net/dsa/tag_edsa.c
+++ b/net/dsa/tag_edsa.c
@@ -1,6 +1,6 @@
/*
* net/dsa/tag_edsa.c - Ethertype DSA tagging
- * Copyright (c) 2008 Marvell Semiconductor
+ * Copyright (c) 2008-2009 Marvell Semiconductor
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -45,7 +45,7 @@ int edsa_xmit(struct sk_buff *skb, struct net_device *dev)
edsa_header[1] = ETH_P_EDSA & 0xff;
edsa_header[2] = 0x00;
edsa_header[3] = 0x00;
- edsa_header[4] = 0x60;
+ edsa_header[4] = 0x60 | p->parent->index;
edsa_header[5] = p->port << 3;
/*
@@ -70,7 +70,7 @@ int edsa_xmit(struct sk_buff *skb, struct net_device *dev)
edsa_header[1] = ETH_P_EDSA & 0xff;
edsa_header[2] = 0x00;
edsa_header[3] = 0x00;
- edsa_header[4] = 0x40;
+ edsa_header[4] = 0x40 | p->parent->index;
edsa_header[5] = p->port << 3;
edsa_header[6] = 0x00;
edsa_header[7] = 0x00;
@@ -78,7 +78,7 @@ int edsa_xmit(struct sk_buff *skb, struct net_device *dev)
skb->protocol = htons(ETH_P_EDSA);
- skb->dev = p->parent->master_netdev;
+ skb->dev = p->parent->dst->master_netdev;
dev_queue_xmit(skb);
return NETDEV_TX_OK;
@@ -91,11 +91,13 @@ out_free:
static int edsa_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt, struct net_device *orig_dev)
{
- struct dsa_switch *ds = dev->dsa_ptr;
+ struct dsa_switch_tree *dst = dev->dsa_ptr;
+ struct dsa_switch *ds;
u8 *edsa_header;
+ int source_device;
int source_port;
- if (unlikely(ds == NULL))
+ if (unlikely(dst == NULL))
goto out_drop;
skb = skb_unshare(skb, GFP_ATOMIC);
@@ -111,16 +113,24 @@ static int edsa_rcv(struct sk_buff *skb, struct net_device *dev,
edsa_header = skb->data + 2;
/*
- * Check that frame type is either TO_CPU or FORWARD, and
- * that the source device is zero.
+ * Check that frame type is either TO_CPU or FORWARD.
*/
- if ((edsa_header[0] & 0xdf) != 0x00 && (edsa_header[0] & 0xdf) != 0xc0)
+ if ((edsa_header[0] & 0xc0) != 0x00 && (edsa_header[0] & 0xc0) != 0xc0)
goto out_drop;
/*
- * Check that the source port is a registered DSA port.
+ * Determine source device and port.
*/
+ source_device = edsa_header[0] & 0x1f;
source_port = (edsa_header[1] >> 3) & 0x1f;
+
+ /*
+ * Check that the source device exists and that the source
+ * port is a registered DSA port.
+ */
+ if (source_device >= dst->pd->nr_chips)
+ goto out_drop;
+ ds = dst->ds[source_device];
if (source_port >= DSA_MAX_PORTS || ds->ports[source_port] == NULL)
goto out_drop;
diff --git a/net/dsa/tag_trailer.c b/net/dsa/tag_trailer.c
index a6d959d..1c3e30c 100644
--- a/net/dsa/tag_trailer.c
+++ b/net/dsa/tag_trailer.c
@@ -1,6 +1,6 @@
/*
* net/dsa/tag_trailer.c - Trailer tag format handling
- * Copyright (c) 2008 Marvell Semiconductor
+ * Copyright (c) 2008-2009 Marvell Semiconductor
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -59,7 +59,7 @@ int trailer_xmit(struct sk_buff *skb, struct net_device *dev)
nskb->protocol = htons(ETH_P_TRAILER);
- nskb->dev = p->parent->master_netdev;
+ nskb->dev = p->parent->dst->master_netdev;
dev_queue_xmit(nskb);
return NETDEV_TX_OK;
@@ -68,12 +68,14 @@ int trailer_xmit(struct sk_buff *skb, struct net_device *dev)
static int trailer_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt, struct net_device *orig_dev)
{
- struct dsa_switch *ds = dev->dsa_ptr;
+ struct dsa_switch_tree *dst = dev->dsa_ptr;
+ struct dsa_switch *ds;
u8 *trailer;
int source_port;
- if (unlikely(ds == NULL))
+ if (unlikely(dst == NULL))
goto out_drop;
+ ds = dst->ds[0];
skb = skb_unshare(skb, GFP_ATOMIC);
if (skb == NULL)