diff options
| -rw-r--r-- | Documentation/laptops/thinkpad-acpi.txt | 50 | ||||
| -rw-r--r-- | drivers/misc/thinkpad_acpi.c | 238 |
2 files changed, 183 insertions, 105 deletions
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 76cb428..a77da28 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -571,6 +571,47 @@ netlink interface and the input layer interface, and don't bother at all with hotkey_report_mode. +Brightness hotkey notes: + +These are the current sane choices for brightness key mapping in +thinkpad-acpi: + +For IBM and Lenovo models *without* ACPI backlight control (the ones on +which thinkpad-acpi will autoload its backlight interface by default, +and on which ACPI video does not export a backlight interface): + +1. Don't enable or map the brightness hotkeys in thinkpad-acpi, as + these older firmware versions unfortunately won't respect the hotkey + mask for brightness keys anyway, and always reacts to them. This + usually work fine, unless X.org drivers are doing something to block + the BIOS. In that case, use (3) below. This is the default mode of + operation. + +2. Enable the hotkeys, but map them to something else that is NOT + KEY_BRIGHTNESS_UP/DOWN or any other keycode that would cause + userspace to try to change the backlight level, and use that as an + on-screen-display hint. + +3. IF AND ONLY IF X.org drivers find a way to block the firmware from + automatically changing the brightness, enable the hotkeys and map + them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN, and feed that to + something that calls xbacklight. thinkpad-acpi will not be able to + change brightness in that case either, so you should disable its + backlight interface. + +For Lenovo models *with* ACPI backlight control: + +1. Load up ACPI video and use that. ACPI video will report ACPI + events for brightness change keys. Do not mess with thinkpad-acpi + defaults in this case. thinkpad-acpi should not have anything to do + with backlight events in a scenario where ACPI video is loaded: + brightness hotkeys must be disabled, and the backlight interface is + to be kept disabled as well. This is the default mode of operation. + +2. Do *NOT* load up ACPI video, enable the hotkeys in thinkpad-acpi, + and map them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN. Process + these keys on userspace somehow (e.g. by calling xbacklight). + Bluetooth --------- @@ -1090,6 +1131,15 @@ it there will be the following attributes: dim the display. +WARNING: + + Whatever you do, do NOT ever call thinkpad-acpi backlight-level change + interface and the ACPI-based backlight level change interface + (available on newer BIOSes, and driven by the Linux ACPI video driver) + at the same time. The two will interact in bad ways, do funny things, + and maybe reduce the life of the backlight lamps by needlessly kicking + its level up and down at every change. + Volume control -- /proc/acpi/ibm/volume --------------------------------------- diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 6cb7812..2c85a2e 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -225,6 +225,7 @@ static struct { u32 light:1; u32 light_status:1; u32 bright_16levels:1; + u32 bright_acpimode:1; u32 wan:1; u32 fan_ctrl_status_undef:1; u32 input_device_registered:1; @@ -807,6 +808,80 @@ static int parse_strtoul(const char *buf, return 0; } +static int __init tpacpi_query_bcl_levels(acpi_handle handle) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj; + int rc; + + if (ACPI_SUCCESS(acpi_evaluate_object(handle, NULL, NULL, &buffer))) { + obj = (union acpi_object *)buffer.pointer; + if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) { + printk(TPACPI_ERR "Unknown _BCL data, " + "please report this to %s\n", TPACPI_MAIL); + rc = 0; + } else { + rc = obj->package.count; + } + } else { + return 0; + } + + kfree(buffer.pointer); + return rc; +} + +static acpi_status __init tpacpi_acpi_walk_find_bcl(acpi_handle handle, + u32 lvl, void *context, void **rv) +{ + char name[ACPI_PATH_SEGMENT_LENGTH]; + struct acpi_buffer buffer = { sizeof(name), &name }; + + if (ACPI_SUCCESS(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer)) && + !strncmp("_BCL", name, sizeof(name) - 1)) { + BUG_ON(!rv || !*rv); + **(int **)rv = tpacpi_query_bcl_levels(handle); + return AE_CTRL_TERMINATE; + } else { + return AE_OK; + } +} + +/* + * Returns 0 (no ACPI _BCL or _BCL invalid), or size of brightness map + */ +static int __init tpacpi_check_std_acpi_brightness_support(void) +{ + int status; + int bcl_levels = 0; + void *bcl_ptr = &bcl_levels; + + if (!vid_handle) { + TPACPI_ACPIHANDLE_INIT(vid); + } + if (!vid_handle) + return 0; + + /* + * Search for a _BCL method, and execute it. This is safe on all + * ThinkPads, and as a side-effect, _BCL will place a Lenovo Vista + * BIOS in ACPI backlight control mode. We do NOT have to care + * about calling the _BCL method in an enabled video device, any + * will do for our purposes. + */ + + status = acpi_walk_namespace(ACPI_TYPE_METHOD, vid_handle, 3, + tpacpi_acpi_walk_find_bcl, NULL, + &bcl_ptr); + + if (ACPI_SUCCESS(status) && bcl_levels > 2) { + tp_features.bright_acpimode = 1; + return (bcl_levels - 2); + } + + return 0; +} + /************************************************************************* * thinkpad-acpi driver attributes */ @@ -1887,6 +1962,9 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) KEY_UNKNOWN, /* 0x0D: FN+INSERT */ KEY_UNKNOWN, /* 0x0E: FN+DELETE */ + /* These either have to go through ACPI video, or + * act like in the IBM ThinkPads, so don't ever + * enable them by default */ KEY_RESERVED, /* 0x0F: FN+HOME (brightness up) */ KEY_RESERVED, /* 0x10: FN+END (brightness down) */ @@ -2091,6 +2169,32 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) set_bit(SW_TABLET_MODE, tpacpi_inputdev->swbit); } + /* Do not issue duplicate brightness change events to + * userspace */ + if (!tp_features.bright_acpimode) + /* update bright_acpimode... */ + tpacpi_check_std_acpi_brightness_support(); + + if (tp_features.bright_acpimode) { + printk(TPACPI_INFO + "This ThinkPad has standard ACPI backlight " + "brightness control, supported by the ACPI " + "video driver\n"); + printk(TPACPI_NOTICE + "Disabling thinkpad-acpi brightness events " + "by default...\n"); + + /* The hotkey_reserved_mask change below is not + * necessary while the keys are at KEY_RESERVED in the + * default map, but better safe than sorry, leave it + * here as a marker of what we have to do, especially + * when we finally become able to set this at runtime + * on response to X.org requests */ + hotkey_reserved_mask |= + (1 << TP_ACPI_HOTKEYSCAN_FNHOME) + | (1 << TP_ACPI_HOTKEYSCAN_FNEND); + } + dbg_printk(TPACPI_DBG_INIT, "enabling hot key handling\n"); res = hotkey_status_set(1); @@ -4273,100 +4377,6 @@ static struct backlight_ops ibm_backlight_data = { /* --------------------------------------------------------------------- */ -static int __init tpacpi_query_bcll_levels(acpi_handle handle) -{ - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; - union acpi_object *obj; - int rc; - - if (ACPI_SUCCESS(acpi_evaluate_object(handle, NULL, NULL, &buffer))) { - obj = (union acpi_object *)buffer.pointer; - if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) { - printk(TPACPI_ERR "Unknown BCLL data, " - "please report this to %s\n", TPACPI_MAIL); - rc = 0; - } else { - rc = obj->package.count; - } - } else { - return 0; - } - - kfree(buffer.pointer); - return rc; -} - -static acpi_status __init brightness_find_bcll(acpi_handle handle, u32 lvl, - void *context, void **rv) -{ - char name[ACPI_PATH_SEGMENT_LENGTH]; - struct acpi_buffer buffer = { sizeof(name), &name }; - - if (ACPI_SUCCESS(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer)) && - !strncmp("BCLL", name, sizeof(name) - 1)) { - if (tpacpi_query_bcll_levels(handle) == 16) { - *rv = handle; - return AE_CTRL_TERMINATE; - } else { - return AE_OK; - } - } else { - return AE_OK; - } -} - -static int __init brightness_check_levels(void) -{ - int status; - void *found_node = NULL; - - if (!vid_handle) { - TPACPI_ACPIHANDLE_INIT(vid); - } - if (!vid_handle) - return 0; - - /* Search for a BCLL package with 16 levels */ - status = acpi_walk_namespace(ACPI_TYPE_PACKAGE, vid_handle, 3, - brightness_find_bcll, NULL, - &found_node); - - return (ACPI_SUCCESS(status) && found_node != NULL); -} - -static acpi_status __init brightness_find_bcl(acpi_handle handle, u32 lvl, - void *context, void **rv) -{ - char name[ACPI_PATH_SEGMENT_LENGTH]; - struct acpi_buffer buffer = { sizeof(name), &name }; - - if (ACPI_SUCCESS(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer)) && - !strncmp("_BCL", name, sizeof(name) - 1)) { - *rv = handle; - return AE_CTRL_TERMINATE; - } else { - return AE_OK; - } -} - -static int __init brightness_check_std_acpi_support(void) -{ - int status; - void *found_node = NULL; - - if (!vid_handle) { - TPACPI_ACPIHANDLE_INIT(vid); - } - if (!vid_handle) - return 0; - - /* Search for a _BCL method, but don't execute it */ - status = acpi_walk_namespace(ACPI_TYPE_METHOD, vid_handle, 3, - brightness_find_bcl, NULL, &found_node); - - return (ACPI_SUCCESS(status) && found_node != NULL); -} - static int __init brightness_init(struct ibm_init_struct *iibm) { int b; @@ -4375,13 +4385,19 @@ static int __init brightness_init(struct ibm_init_struct *iibm) mutex_init(&brightness_mutex); - if (!brightness_enable) { - dbg_printk(TPACPI_DBG_INIT, - "brightness support disabled by " - "module parameter\n"); - return 1; - } else if (brightness_enable > 1) { - if (brightness_check_std_acpi_support()) { + /* + * We always attempt to detect acpi support, so as to switch + * Lenovo Vista BIOS to ACPI brightness mode even if we are not + * going to publish a backlight interface + */ + b = tpacpi_check_std_acpi_brightness_support(); + if (b > 0) { + if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) { + printk(TPACPI_NOTICE + "Lenovo BIOS switched to ACPI backlight " + "control mode\n"); + } + if (brightness_enable > 1) { printk(TPACPI_NOTICE "standard ACPI backlight interface " "available, not loading native one...\n"); @@ -4389,6 +4405,22 @@ static int __init brightness_init(struct ibm_init_struct *iibm) } } + if (!brightness_enable) { + dbg_printk(TPACPI_DBG_INIT, + "brightness support disabled by " + "module parameter\n"); + return 1; + } + + if (b > 16) { + printk(TPACPI_ERR + "Unsupported brightness interface, " + "please contact %s\n", TPACPI_MAIL); + return 1; + } + if (b == 16) + tp_features.bright_16levels = 1; + if (!brightness_mode) { if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) brightness_mode = 2; @@ -4402,10 +4434,6 @@ static int __init brightness_init(struct ibm_init_struct *iibm) if (brightness_mode > 3) return -EINVAL; - tp_features.bright_16levels = - thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO && - brightness_check_levels(); - b = brightness_get(NULL); if (b < 0) return 1; |