aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/sound/alsa/ALSA-Configuration.txt44
-rw-r--r--sound/isa/Kconfig9
-rw-r--r--sound/isa/wavefront/wavefront_synth.c120
3 files changed, 92 insertions, 81 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index d766054..3df33ea 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1716,8 +1716,52 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
dma2 - DMA2 # for CS4232 PCM interface.
isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
+ The below are options for wavefront_synth features:
+ wf_raw - Assume that we need to boot the OS (default:no)
+ If yes, then during driver loading, the state of the board is
+ ignored, and we reset the board and load the firmware anyway.
+ fx_raw - Assume that the FX process needs help (default:yes)
+ If false, we'll leave the FX processor in whatever state it is
+ when the driver is loaded. The default is to download the
+ microprogram and associated coefficients to set it up for
+ "default" operation, whatever that means.
+ debug_default - Debug parameters for card initialization
+ wait_usecs - How long to wait without sleeping, usecs
+ (default:150)
+ This magic number seems to give pretty optimal throughput
+ based on my limited experimentation.
+ If you want to play around with it and find a better value, be
+ my guest. Remember, the idea is to get a number that causes us
+ to just busy wait for as many WaveFront commands as possible,
+ without coming up with a number so large that we hog the whole
+ CPU.
+ Specifically, with this number, out of about 134,000 status
+ waits, only about 250 result in a sleep.
+ sleep_interval - How long to sleep when waiting for reply
+ (default: 100)
+ sleep_tries - How many times to try sleeping during a wait
+ (default: 50)
+ ospath - Pathname to processed ICS2115 OS firmware
+ (default:wavefront.os)
+ The path name of the ISC2115 OS firmware. In the recent
+ version, it's handled via firmware loader framework, so it
+ must be installed in the proper path, typically,
+ /lib/firmware.
+ reset_time - How long to wait for a reset to take effect
+ (default:2)
+ ramcheck_time - How many seconds to wait for the RAM test
+ (default:20)
+ osrun_time - How many seconds to wait for the ICS2115 OS
+ (default:10)
+
This module supports multiple cards and ISA PnP.
+ Note: the firmware file "wavefront.os" was located in the earlier
+ version in /etc. Now it's loaded via firmware loader, and
+ must be in the proper firmware path, such as /lib/firmware.
+ Copy (or symlink) the file appropriately if you get an error
+ regarding firmware downloading after upgrading the kernel.
+
Module snd-sonicvibes
---------------------
diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig
index ea5084a..6b6aa2c 100644
--- a/sound/isa/Kconfig
+++ b/sound/isa/Kconfig
@@ -414,7 +414,7 @@ config SND_SSCAPE
config SND_WAVEFRONT
tristate "Turtle Beach Maui,Tropez,Tropez+ (Wavefront)"
depends on SND
- select FW_LOADER if !SND_WAVEFRONT_FIRMWARE_IN_KERNEL
+ select FW_LOADER
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_CS4231_LIB
@@ -430,8 +430,9 @@ config SND_WAVEFRONT_FIRMWARE_IN_KERNEL
depends on SND_WAVEFRONT
default y
help
- Say Y here to include the static firmware built in the kernel
- for the Wavefront driver. If you choose N here, you need to
- install the firmware files from the alsa-firmware package.
+ Say Y here to include the static firmware for FX DSP built in
+ the kernel for the Wavefront driver. If you choose N here,
+ you need to install the firmware files from the
+ alsa-firmware package.
endmenu
diff --git a/sound/isa/wavefront/wavefront_synth.c b/sound/isa/wavefront/wavefront_synth.c
index bacc51c..2da11e8 100644
--- a/sound/isa/wavefront/wavefront_synth.c
+++ b/sound/isa/wavefront/wavefront_synth.c
@@ -27,6 +27,7 @@
#include <linux/delay.h>
#include <linux/time.h>
#include <linux/wait.h>
+#include <linux/firmware.h>
#include <linux/moduleparam.h>
#include <sound/core.h>
#include <sound/snd_wavefront.h>
@@ -53,9 +54,8 @@ static int debug_default = 0; /* you can set this to control debugging
/* XXX this needs to be made firmware and hardware version dependent */
-static char *ospath = "/etc/sound/wavefront.os"; /* where to find a processed
- version of the WaveFront OS
- */
+#define DEFAULT_OSPATH "wavefront.os"
+static char *ospath = DEFAULT_OSPATH; /* the firmware file name */
static int wait_usecs = 150; /* This magic number seems to give pretty optimal
throughput based on my limited experimentation.
@@ -97,7 +97,7 @@ MODULE_PARM_DESC(sleep_interval, "how long to sleep when waiting for reply");
module_param(sleep_tries, int, 0444);
MODULE_PARM_DESC(sleep_tries, "how many times to try sleeping during a wait");
module_param(ospath, charp, 0444);
-MODULE_PARM_DESC(ospath, "full pathname to processed ICS2115 OS firmware");
+MODULE_PARM_DESC(ospath, "pathname to processed ICS2115 OS firmware");
module_param(reset_time, int, 0444);
MODULE_PARM_DESC(reset_time, "how long to wait for a reset to take effect");
module_param(ramcheck_time, int, 0444);
@@ -1938,111 +1938,75 @@ wavefront_reset_to_cleanliness (snd_wavefront_t *dev)
return (1);
}
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/unistd.h>
-#include <linux/syscalls.h>
-#include <asm/uaccess.h>
-
-
static int __devinit
wavefront_download_firmware (snd_wavefront_t *dev, char *path)
{
- unsigned char section[WF_SECTION_MAX];
- signed char section_length; /* yes, just a char; max value is WF_SECTION_MAX */
+ unsigned char *buf;
+ int len, err;
int section_cnt_downloaded = 0;
- int fd;
- int c;
- int i;
- mm_segment_t fs;
-
- /* This tries to be a bit cleverer than the stuff Alan Cox did for
- the generic sound firmware, in that it actually knows
- something about the structure of the Motorola firmware. In
- particular, it uses a version that has been stripped of the
- 20K of useless header information, and had section lengths
- added, making it possible to load the entire OS without any
- [kv]malloc() activity, since the longest entity we ever read is
- 42 bytes (well, WF_SECTION_MAX) long.
- */
-
- fs = get_fs();
- set_fs (get_ds());
+ const struct firmware *firmware;
- if ((fd = sys_open ((char __user *) path, 0, 0)) < 0) {
- snd_printk ("Unable to load \"%s\".\n",
- path);
+ err = request_firmware(&firmware, path, dev->card->dev);
+ if (err < 0) {
+ snd_printk(KERN_ERR "firmware (%s) download failed!!!\n", path);
return 1;
}
- while (1) {
- int x;
-
- if ((x = sys_read (fd, (char __user *) &section_length, sizeof (section_length))) !=
- sizeof (section_length)) {
- snd_printk ("firmware read error.\n");
- goto failure;
- }
-
- if (section_length == 0) {
+ len = 0;
+ buf = firmware->data;
+ for (;;) {
+ int section_length = *(signed char *)buf;
+ if (section_length == 0)
break;
- }
-
if (section_length < 0 || section_length > WF_SECTION_MAX) {
- snd_printk ("invalid firmware section length %d\n",
- section_length);
+ snd_printk(KERN_ERR
+ "invalid firmware section length %d\n",
+ section_length);
goto failure;
}
+ buf++;
+ len++;
- if (sys_read (fd, (char __user *) section, section_length) != section_length) {
- snd_printk ("firmware section "
- "read error.\n");
+ if (firmware->size < len + section_length) {
+ snd_printk(KERN_ERR "firmware section read error.\n");
goto failure;
}
/* Send command */
-
- if (wavefront_write (dev, WFC_DOWNLOAD_OS)) {
+ if (wavefront_write(dev, WFC_DOWNLOAD_OS))
goto failure;
- }
- for (i = 0; i < section_length; i++) {
- if (wavefront_write (dev, section[i])) {
+ for (; section_length; section_length--) {
+ if (wavefront_write(dev, *buf))
goto failure;
- }
+ buf++;
+ len++;
}
/* get ACK */
-
- if (wavefront_wait (dev, STAT_CAN_READ)) {
-
- if ((c = inb (dev->data_port)) != WF_ACK) {
-
- snd_printk ("download "
- "of section #%d not "
- "acknowledged, ack = 0x%x\n",
- section_cnt_downloaded + 1, c);
- goto failure;
-
- }
-
- } else {
- snd_printk ("time out for firmware ACK.\n");
+ if (!wavefront_wait(dev, STAT_CAN_READ)) {
+ snd_printk(KERN_ERR "time out for firmware ACK.\n");
+ goto failure;
+ }
+ err = inb(dev->data_port);
+ if (err != WF_ACK) {
+ snd_printk(KERN_ERR
+ "download of section #%d not "
+ "acknowledged, ack = 0x%x\n",
+ section_cnt_downloaded + 1, err);
goto failure;
}
+ section_cnt_downloaded++;
}
- sys_close (fd);
- set_fs (fs);
+ release_firmware(firmware);
return 0;
failure:
- sys_close (fd);
- set_fs (fs);
- snd_printk ("firmware download failed!!!\n");
+ release_firmware(firmware);
+ snd_printk(KERN_ERR "firmware download failed!!!\n");
return 1;
}
@@ -2232,3 +2196,5 @@ snd_wavefront_detect (snd_wavefront_card_t *card)
return 0;
}
+
+MODULE_FIRMWARE(DEFAULT_OSPATH);