diff options
Diffstat (limited to 'Documentation/spi/pxa2xx')
-rw-r--r-- | Documentation/spi/pxa2xx | 9 |
1 files changed, 2 insertions, 7 deletions
diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx index 493dada..3352f97 100644 --- a/Documentation/spi/pxa2xx +++ b/Documentation/spi/pxa2xx @@ -2,7 +2,7 @@ PXA2xx SPI on SSP driver HOWTO =================================================== This a mini howto on the pxa2xx_spi driver. The driver turns a PXA2xx synchronous serial port into a SPI master controller -(see Documentation/spi/spi_summary). The driver has the following features +(see Documentation/spi/spi-summary). The driver has the following features - Support for any PXA2xx SSP - SSP PIO and SSP DMA data transfers. @@ -22,15 +22,11 @@ Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a found in include/linux/spi/pxa2xx_spi.h: struct pxa2xx_spi_master { - enum pxa_ssp_type ssp_type; u32 clock_enable; u16 num_chipselect; u8 enable_dma; }; -The "pxa2xx_spi_master.ssp_type" field must have a value between 1 and 3 and -informs the driver which features a particular SSP supports. - The "pxa2xx_spi_master.clock_enable" field is used to enable/disable the corresponding SSP peripheral block in the "Clock Enable Register (CKEN"). See the "PXA2xx Developer Manual" section "Clocks and Power Management". @@ -61,7 +57,6 @@ static struct resource pxa_spi_nssp_resources[] = { }; static struct pxa2xx_spi_master pxa_nssp_master_info = { - .ssp_type = PXA25x_NSSP, /* Type of SSP */ .clock_enable = CKEN_NSSP, /* NSSP Peripheral clock */ .num_chipselect = 1, /* Matches the number of chips attached to NSSP */ .enable_dma = 1, /* Enables NSSP DMA */ @@ -90,7 +85,7 @@ Declaring Slave Devices ----------------------- Typically each SPI slave (chip) is defined in the arch/.../mach-*/board-*.c using the "spi_board_info" structure found in "linux/spi/spi.h". See -"Documentation/spi/spi_summary" for additional information. +"Documentation/spi/spi-summary" for additional information. Each slave device attached to the PXA must provide slave specific configuration information via the structure "pxa2xx_spi_chip" found in |