aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/lguest/lguest.c176
1 files changed, 105 insertions, 71 deletions
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 6c8a238..4df1804 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -34,6 +34,8 @@
#include <zlib.h>
#include <assert.h>
#include <sched.h>
+#include <limits.h>
+#include <stddef.h>
#include "linux/lguest_launcher.h"
#include "linux/virtio_config.h"
#include "linux/virtio_net.h"
@@ -99,13 +101,11 @@ struct device_list
/* The descriptor page for the devices. */
u8 *descpage;
- /* The tail of the last descriptor. */
- unsigned int desc_used;
-
/* A single linked list of devices. */
struct device *dev;
- /* ... And an end pointer so we can easily append new devices */
- struct device **lastdev;
+ /* And a pointer to the last device for easy append and also for
+ * configuration appending. */
+ struct device *lastdev;
};
/* The list of Guest devices, based on command line arguments. */
@@ -191,7 +191,7 @@ static void *_convert(struct iovec *iov, size_t size, size_t align,
#define cpu_to_le64(v64) (v64)
#define le16_to_cpu(v16) (v16)
#define le32_to_cpu(v32) (v32)
-#define le64_to_cpu(v32) (v64)
+#define le64_to_cpu(v64) (v64)
/*L:100 The Launcher code itself takes us out into userspace, that scary place
* where pointers run wild and free! Unfortunately, like most userspace
@@ -986,54 +986,44 @@ static void handle_input(int fd)
*
* All devices need a descriptor so the Guest knows it exists, and a "struct
* device" so the Launcher can keep track of it. We have common helper
- * routines to allocate them.
- *
- * This routine allocates a new "struct lguest_device_desc" from descriptor
- * table just above the Guest's normal memory. It returns a pointer to that
- * descriptor. */
-static struct lguest_device_desc *new_dev_desc(u16 type)
-{
- struct lguest_device_desc *d;
+ * routines to allocate and manage them. */
- /* We only have one page for all the descriptors. */
- if (devices.desc_used + sizeof(*d) > getpagesize())
- errx(1, "Too many devices");
-
- /* We don't need to set config_len or status: page is 0 already. */
- d = (void *)devices.descpage + devices.desc_used;
- d->type = type;
- devices.desc_used += sizeof(*d);
-
- return d;
+/* The layout of the device page is a "struct lguest_device_desc" followed by a
+ * number of virtqueue descriptors, then two sets of feature bits, then an
+ * array of configuration bytes. This routine returns the configuration
+ * pointer. */
+static u8 *device_config(const struct device *dev)
+{
+ return (void *)(dev->desc + 1)
+ + dev->desc->num_vq * sizeof(struct lguest_vqconfig)
+ + dev->desc->feature_len * 2;
}
-/* Each device descriptor is followed by some configuration information.
- * Each configuration field looks like: u8 type, u8 len, [... len bytes...].
- *
- * This routine adds a new field to an existing device's descriptor. It only
- * works for the last device, but that's OK because that's how we use it. */
-static void add_desc_field(struct device *dev, u8 type, u8 len, const void *c)
+/* This routine allocates a new "struct lguest_device_desc" from descriptor
+ * table page just above the Guest's normal memory. It returns a pointer to
+ * that descriptor. */
+static struct lguest_device_desc *new_dev_desc(u16 type)
{
- /* This is the last descriptor, right? */
- assert(devices.descpage + devices.desc_used
- == (u8 *)(dev->desc + 1) + dev->desc->config_len);
+ struct lguest_device_desc d = { .type = type };
+ void *p;
- /* We only have one page of device descriptions. */
- if (devices.desc_used + 2 + len > getpagesize())
- errx(1, "Too many devices");
+ /* Figure out where the next device config is, based on the last one. */
+ if (devices.lastdev)
+ p = device_config(devices.lastdev)
+ + devices.lastdev->desc->config_len;
+ else
+ p = devices.descpage;
- /* Copy in the new config header: type then length. */
- devices.descpage[devices.desc_used++] = type;
- devices.descpage[devices.desc_used++] = len;
- memcpy(devices.descpage + devices.desc_used, c, len);
- devices.desc_used += len;
+ /* We only have one page for all the descriptors. */
+ if (p + sizeof(d) > (void *)devices.descpage + getpagesize())
+ errx(1, "Too many devices");
- /* Update the device descriptor length: two byte head then data. */
- dev->desc->config_len += 2 + len;
+ /* p might not be aligned, so we memcpy in. */
+ return memcpy(p, &d, sizeof(d));
}
-/* This routine adds a virtqueue to a device. We specify how many descriptors
- * the virtqueue is to have. */
+/* Each device descriptor is followed by the description of its virtqueues. We
+ * specify how many descriptors the virtqueue is to have. */
static void add_virtqueue(struct device *dev, unsigned int num_descs,
void (*handle_output)(int fd, struct virtqueue *me))
{
@@ -1059,9 +1049,15 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
/* Initialize the vring. */
vring_init(&vq->vring, num_descs, p, getpagesize());
- /* Add the configuration information to this device's descriptor. */
- add_desc_field(dev, VIRTIO_CONFIG_F_VIRTQUEUE,
- sizeof(vq->config), &vq->config);
+ /* Append virtqueue to this device's descriptor. We use
+ * device_config() to get the end of the device's current virtqueues;
+ * we check that we haven't added any config or feature information
+ * yet, otherwise we'd be overwriting them. */
+ assert(dev->desc->config_len == 0 && dev->desc->feature_len == 0);
+ memcpy(device_config(dev), &vq->config, sizeof(vq->config));
+ dev->desc->num_vq++;
+
+ verbose("Virtqueue page %#lx\n", to_guest_phys(p));
/* Add to tail of list, so dev->vq is first vq, dev->vq->next is
* second. */
@@ -1077,6 +1073,37 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
vq->vring.used->flags = VRING_USED_F_NO_NOTIFY;
}
+/* The virtqueue descriptors are followed by feature bytes. */
+static void add_feature(struct device *dev, unsigned bit)
+{
+ u8 *features;
+
+ /* We can't extend the feature bits once we've added config bytes */
+ if (dev->desc->feature_len <= bit / CHAR_BIT) {
+ assert(dev->desc->config_len == 0);
+ dev->desc->feature_len = (bit / CHAR_BIT) + 1;
+ }
+
+ features = (u8 *)(dev->desc + 1)
+ + dev->desc->num_vq * sizeof(struct lguest_vqconfig);
+
+ features[bit / CHAR_BIT] |= (1 << (bit % CHAR_BIT));
+}
+
+/* This routine sets the configuration fields for an existing device's
+ * descriptor. It only works for the last device, but that's OK because that's
+ * how we use it. */
+static void set_config(struct device *dev, unsigned len, const void *conf)
+{
+ /* Check we haven't overflowed our single page. */
+ if (device_config(dev) + len > devices.descpage + getpagesize())
+ errx(1, "Too many devices");
+
+ /* Copy in the config information, and store the length. */
+ memcpy(device_config(dev), conf, len);
+ dev->desc->config_len = len;
+}
+
/* This routine does all the creation and setup of a new device, including
* calling new_dev_desc() to allocate the descriptor and device memory. */
static struct device *new_device(const char *name, u16 type, int fd,
@@ -1084,14 +1111,6 @@ static struct device *new_device(const char *name, u16 type, int fd,
{
struct device *dev = malloc(sizeof(*dev));
- /* Append to device list. Prepending to a single-linked list is
- * easier, but the user expects the devices to be arranged on the bus
- * in command-line order. The first network device on the command line
- * is eth0, the first block device /dev/vda, etc. */
- *devices.lastdev = dev;
- dev->next = NULL;
- devices.lastdev = &dev->next;
-
/* Now we populate the fields one at a time. */
dev->fd = fd;
/* If we have an input handler for this file descriptor, then we add it
@@ -1102,6 +1121,17 @@ static struct device *new_device(const char *name, u16 type, int fd,
dev->handle_input = handle_input;
dev->name = name;
dev->vq = NULL;
+
+ /* Append to device list. Prepending to a single-linked list is
+ * easier, but the user expects the devices to be arranged on the bus
+ * in command-line order. The first network device on the command line
+ * is eth0, the first block device /dev/vda, etc. */
+ if (devices.lastdev)
+ devices.lastdev->next = dev;
+ else
+ devices.dev = dev;
+ devices.lastdev = dev;
+
return dev;
}
@@ -1226,7 +1256,7 @@ static void setup_tun_net(const char *arg)
int netfd, ipfd;
u32 ip;
const char *br_name = NULL;
- u8 hwaddr[6];
+ struct virtio_net_config conf;
/* We open the /dev/net/tun device and tell it we want a tap device. A
* tap device is like a tun device, only somehow different. To tell
@@ -1265,12 +1295,13 @@ static void setup_tun_net(const char *arg)
ip = str2ip(arg);
/* Set up the tun device, and get the mac address for the interface. */
- configure_device(ipfd, ifr.ifr_name, ip, hwaddr);
+ configure_device(ipfd, ifr.ifr_name, ip, conf.mac);
/* Tell Guest what MAC address to use. */
- add_desc_field(dev, VIRTIO_CONFIG_NET_MAC_F, sizeof(hwaddr), hwaddr);
+ add_feature(dev, VIRTIO_NET_F_MAC);
+ set_config(dev, sizeof(conf), &conf);
- /* We don't seed the socket any more; setup is done. */
+ /* We don't need the socket any more; setup is done. */
close(ipfd);
verbose("device %u: tun net %u.%u.%u.%u\n",
@@ -1458,8 +1489,7 @@ static void setup_block_file(const char *filename)
struct device *dev;
struct vblk_info *vblk;
void *stack;
- u64 cap;
- unsigned int val;
+ struct virtio_blk_config conf;
/* This is the pipe the I/O thread will use to tell us I/O is done. */
pipe(p);
@@ -1477,14 +1507,18 @@ static void setup_block_file(const char *filename)
vblk->fd = open_or_die(filename, O_RDWR|O_LARGEFILE);
vblk->len = lseek64(vblk->fd, 0, SEEK_END);
+ /* We support barriers. */
+ add_feature(dev, VIRTIO_BLK_F_BARRIER);
+
/* Tell Guest how many sectors this device has. */
- cap = cpu_to_le64(vblk->len / 512);
- add_desc_field(dev, VIRTIO_CONFIG_BLK_F_CAPACITY, sizeof(cap), &cap);
+ conf.capacity = cpu_to_le64(vblk->len / 512);
/* Tell Guest not to put in too many descriptors at once: two are used
* for the in and out elements. */
- val = cpu_to_le32(VIRTQUEUE_NUM - 2);
- add_desc_field(dev, VIRTIO_CONFIG_BLK_F_SEG_MAX, sizeof(val), &val);
+ add_feature(dev, VIRTIO_BLK_F_SEG_MAX);
+ conf.seg_max = cpu_to_le32(VIRTQUEUE_NUM - 2);
+
+ set_config(dev, sizeof(conf), &conf);
/* The I/O thread writes to this end of the pipe when done. */
vblk->done_fd = p[1];
@@ -1505,7 +1539,7 @@ static void setup_block_file(const char *filename)
close(vblk->workpipe[0]);
verbose("device %u: virtblock %llu sectors\n",
- devices.device_num, cap);
+ devices.device_num, le64_to_cpu(conf.capacity));
}
/* That's the end of device setup. :*/
@@ -1610,12 +1644,12 @@ int main(int argc, char *argv[])
/* First we initialize the device list. Since console and network
* device receive input from a file descriptor, we keep an fdset
* (infds) and the maximum fd number (max_infd) with the head of the
- * list. We also keep a pointer to the last device, for easy appending
- * to the list. Finally, we keep the next interrupt number to hand out
- * (1: remember that 0 is used by the timer). */
+ * list. We also keep a pointer to the last device. Finally, we keep
+ * the next interrupt number to hand out (1: remember that 0 is used by
+ * the timer). */
FD_ZERO(&devices.infds);
devices.max_infd = -1;
- devices.lastdev = &devices.dev;
+ devices.lastdev = NULL;
devices.next_irq = 1;
cpu_id = 0;