diff options
Diffstat (limited to 'arch/arm/kernel/kprobes-test.h')
| -rw-r--r-- | arch/arm/kernel/kprobes-test.h | 432 |
1 files changed, 432 insertions, 0 deletions
diff --git a/arch/arm/kernel/kprobes-test.h b/arch/arm/kernel/kprobes-test.h new file mode 100644 index 0000000..e28a869 --- /dev/null +++ b/arch/arm/kernel/kprobes-test.h @@ -0,0 +1,432 @@ +/* + * arch/arm/kernel/kprobes-test.h + * + * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define VERBOSE 0 /* Set to '1' for more logging of test cases */ + +#ifdef CONFIG_THUMB2_KERNEL +#define NORMAL_ISA "16" +#else +#define NORMAL_ISA "32" +#endif + + +/* Flags used in kprobe_test_flags */ +#define TEST_FLAG_NO_ITBLOCK (1<<0) +#define TEST_FLAG_FULL_ITBLOCK (1<<1) +#define TEST_FLAG_NARROW_INSTR (1<<2) + +extern int kprobe_test_flags; +extern int kprobe_test_cc_position; + + +#define TEST_MEMORY_SIZE 256 + + +/* + * Test case structures. + * + * The arguments given to test cases can be one of three types. + * + * ARG_TYPE_REG + * Load a register with the given value. + * + * ARG_TYPE_PTR + * Load a register with a pointer into the stack buffer (SP + given value). + * + * ARG_TYPE_MEM + * Store the given value into the stack buffer at [SP+index]. + * + */ + +#define ARG_TYPE_END 0 +#define ARG_TYPE_REG 1 +#define ARG_TYPE_PTR 2 +#define ARG_TYPE_MEM 3 + +#define ARG_FLAG_UNSUPPORTED 0x01 +#define ARG_FLAG_SUPPORTED 0x02 +#define ARG_FLAG_THUMB 0x10 /* Must be 16 so TEST_ISA can be used */ +#define ARG_FLAG_ARM 0x20 /* Must be 32 so TEST_ISA can be used */ + +struct test_arg { + u8 type; /* ARG_TYPE_x */ + u8 _padding[7]; +}; + +struct test_arg_regptr { + u8 type; /* ARG_TYPE_REG or ARG_TYPE_PTR */ + u8 reg; + u8 _padding[2]; + u32 val; +}; + +struct test_arg_mem { + u8 type; /* ARG_TYPE_MEM */ + u8 index; + u8 _padding[2]; + u32 val; +}; + +struct test_arg_end { + u8 type; /* ARG_TYPE_END */ + u8 flags; /* ARG_FLAG_x */ + u16 code_offset; + u16 branch_offset; + u16 end_offset; +}; + + +/* + * Building blocks for test cases. + * + * Each test case is wrapped between TESTCASE_START and TESTCASE_END. + * + * To specify arguments for a test case the TEST_ARG_{REG,PTR,MEM} macros are + * used followed by a terminating TEST_ARG_END. + * + * After this, the instruction to be tested is defined with TEST_INSTRUCTION. + * Or for branches, TEST_BRANCH_B and TEST_BRANCH_F (branch forwards/backwards). + * + * Some specific test cases may make use of other custom constructs. + */ + +#if VERBOSE +#define verbose(fmt, ...) pr_info(fmt, ##__VA_ARGS__) +#else +#define verbose(fmt, ...) +#endif + +#define TEST_GROUP(title) \ + verbose("\n"); \ + verbose(title"\n"); \ + verbose("---------------------------------------------------------\n"); + +#define TESTCASE_START(title) \ + __asm__ __volatile__ ( \ + "bl __kprobes_test_case_start \n\t" \ + /* don't use .asciz here as 'title' may be */ \ + /* multiple strings to be concatenated. */ \ + ".ascii "#title" \n\t" \ + ".byte 0 \n\t" \ + ".align 2 \n\t" + +#define TEST_ARG_REG(reg, val) \ + ".byte "__stringify(ARG_TYPE_REG)" \n\t" \ + ".byte "#reg" \n\t" \ + ".short 0 \n\t" \ + ".word "#val" \n\t" + +#define TEST_ARG_PTR(reg, val) \ + ".byte "__stringify(ARG_TYPE_PTR)" \n\t" \ + ".byte "#reg" \n\t" \ + ".short 0 \n\t" \ + ".word "#val" \n\t" + +#define TEST_ARG_MEM(index, val) \ + ".byte "__stringify(ARG_TYPE_MEM)" \n\t" \ + ".byte "#index" \n\t" \ + ".short 0 \n\t" \ + ".word "#val" \n\t" + +#define TEST_ARG_END(flags) \ + ".byte "__stringify(ARG_TYPE_END)" \n\t" \ + ".byte "TEST_ISA flags" \n\t" \ + ".short 50f-0f \n\t" \ + ".short 2f-0f \n\t" \ + ".short 99f-0f \n\t" \ + ".code "TEST_ISA" \n\t" \ + "0: \n\t" + +#define TEST_INSTRUCTION(instruction) \ + "50: nop \n\t" \ + "1: "instruction" \n\t" \ + " nop \n\t" + +#define TEST_BRANCH_F(instruction) \ + TEST_INSTRUCTION(instruction) \ + " b 99f \n\t" \ + "2: nop \n\t" + +#define TEST_BRANCH_B(instruction) \ + " b 50f \n\t" \ + " b 99f \n\t" \ + "2: nop \n\t" \ + " b 99f \n\t" \ + TEST_INSTRUCTION(instruction) + +#define TEST_BRANCH_FX(instruction, codex) \ + TEST_INSTRUCTION(instruction) \ + " b 99f \n\t" \ + codex" \n\t" \ + " b 99f \n\t" \ + "2: nop \n\t" + +#define TEST_BRANCH_BX(instruction, codex) \ + " b 50f \n\t" \ + " b 99f \n\t" \ + "2: nop \n\t" \ + " b 99f \n\t" \ + codex" \n\t" \ + TEST_INSTRUCTION(instruction) + +#define TESTCASE_END \ + "2: \n\t" \ + "99: \n\t" \ + " bl __kprobes_test_case_end_"TEST_ISA" \n\t" \ + ".code "NORMAL_ISA" \n\t" \ + : : \ + : "r0", "r1", "r2", "r3", "ip", "lr", "memory", "cc" \ + ); + + +/* + * Macros to define test cases. + * + * Those of the form TEST_{R,P,M}* can be used to define test cases + * which take combinations of the three basic types of arguments. E.g. + * + * TEST_R One register argument + * TEST_RR Two register arguments + * TEST_RPR A register, a pointer, then a register argument + * + * For testing instructions which may branch, there are macros TEST_BF_* + * and TEST_BB_* for branching forwards and backwards. + * + * TEST_SUPPORTED and TEST_UNSUPPORTED don't cause the code to be executed, + * the just verify that a kprobe is or is not allowed on the given instruction. + */ + +#define TEST(code) \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code) \ + TESTCASE_END + +#define TEST_UNSUPPORTED(code) \ + TESTCASE_START(code) \ + TEST_ARG_END("|"__stringify(ARG_FLAG_UNSUPPORTED)) \ + TEST_INSTRUCTION(code) \ + TESTCASE_END + +#define TEST_SUPPORTED(code) \ + TESTCASE_START(code) \ + TEST_ARG_END("|"__stringify(ARG_FLAG_SUPPORTED)) \ + TEST_INSTRUCTION(code) \ + TESTCASE_END + +#define TEST_R(code1, reg, val, code2) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg code2) \ + TESTCASE_END + +#define TEST_RR(code1, reg1, val1, code2, reg2, val2, code3) \ + TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \ + TESTCASE_END + +#define TEST_RRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\ + TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_REG(reg3, val3) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TESTCASE_END + +#define TEST_RRRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4, reg4, val4) \ + TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_REG(reg3, val3) \ + TEST_ARG_REG(reg4, val4) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4) \ + TESTCASE_END + +#define TEST_P(code1, reg1, val1, code2) \ + TESTCASE_START(code1 #reg1 code2) \ + TEST_ARG_PTR(reg1, val1) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2) \ + TESTCASE_END + +#define TEST_PR(code1, reg1, val1, code2, reg2, val2, code3) \ + TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ + TEST_ARG_PTR(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \ + TESTCASE_END + +#define TEST_RP(code1, reg1, val1, code2, reg2, val2, code3) \ + TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_PTR(reg2, val2) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \ + TESTCASE_END + +#define TEST_PRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\ + TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TEST_ARG_PTR(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_REG(reg3, val3) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TESTCASE_END + +#define TEST_RPR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\ + TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_PTR(reg2, val2) \ + TEST_ARG_REG(reg3, val3) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TESTCASE_END + +#define TEST_RRP(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\ + TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_PTR(reg3, val3) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \ + TESTCASE_END + +#define TEST_BF_P(code1, reg1, val1, code2) \ + TESTCASE_START(code1 #reg1 code2) \ + TEST_ARG_PTR(reg1, val1) \ + TEST_ARG_END("") \ + TEST_BRANCH_F(code1 #reg1 code2) \ + TESTCASE_END + +#define TEST_BF(code) \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + TEST_BRANCH_F(code) \ + TESTCASE_END + +#define TEST_BB(code) \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + TEST_BRANCH_B(code) \ + TESTCASE_END + +#define TEST_BF_R(code1, reg, val, code2) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_END("") \ + TEST_BRANCH_F(code1 #reg code2) \ + TESTCASE_END + +#define TEST_BB_R(code1, reg, val, code2) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_END("") \ + TEST_BRANCH_B(code1 #reg code2) \ + TESTCASE_END + +#define TEST_BF_RR(code1, reg1, val1, code2, reg2, val2, code3) \ + TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_END("") \ + TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3) \ + TESTCASE_END + +#define TEST_BF_X(code, codex) \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + TEST_BRANCH_FX(code, codex) \ + TESTCASE_END + +#define TEST_BB_X(code, codex) \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + TEST_BRANCH_BX(code, codex) \ + TESTCASE_END + +#define TEST_BF_RX(code1, reg, val, code2, codex) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_END("") \ + TEST_BRANCH_FX(code1 #reg code2, codex) \ + TESTCASE_END + +#define TEST_X(code, codex) \ + TESTCASE_START(code) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code) \ + " b 99f \n\t" \ + " "codex" \n\t" \ + TESTCASE_END + +#define TEST_RX(code1, reg, val, code2, codex) \ + TESTCASE_START(code1 #reg code2) \ + TEST_ARG_REG(reg, val) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 __stringify(reg) code2) \ + " b 99f \n\t" \ + " "codex" \n\t" \ + TESTCASE_END + +#define TEST_RRX(code1, reg1, val1, code2, reg2, val2, code3, codex) \ + TESTCASE_START(code1 #reg1 code2 #reg2 code3) \ + TEST_ARG_REG(reg1, val1) \ + TEST_ARG_REG(reg2, val2) \ + TEST_ARG_END("") \ + TEST_INSTRUCTION(code1 __stringify(reg1) code2 __stringify(reg2) code3) \ + " b 99f \n\t" \ + " "codex" \n\t" \ + TESTCASE_END + + +/* + * Macros for defining space directives spread over multiple lines. + * These are required so the compiler guesses better the length of inline asm + * code and will spill the literal pool early enough to avoid generating PC + * relative loads with out of range offsets. + */ +#define TWICE(x) x x +#define SPACE_0x8 TWICE(".space 4\n\t") +#define SPACE_0x10 TWICE(SPACE_0x8) +#define SPACE_0x20 TWICE(SPACE_0x10) +#define SPACE_0x40 TWICE(SPACE_0x20) +#define SPACE_0x80 TWICE(SPACE_0x40) +#define SPACE_0x100 TWICE(SPACE_0x80) +#define SPACE_0x200 TWICE(SPACE_0x100) +#define SPACE_0x400 TWICE(SPACE_0x200) +#define SPACE_0x800 TWICE(SPACE_0x400) +#define SPACE_0x1000 TWICE(SPACE_0x800) + + +/* Various values used in test cases... */ +#define N(val) (val ^ 0xffffffff) +#define VAL1 0x12345678 +#define VAL2 N(VAL1) +#define VAL3 0xa5f801 +#define VAL4 N(VAL3) +#define VALM 0x456789ab +#define VALR 0xdeaddead +#define HH1 0x0123fecb +#define HH2 0xa9874567 + + +#ifdef CONFIG_THUMB2_KERNEL +void kprobe_thumb16_test_cases(void); +void kprobe_thumb32_test_cases(void); +#else +void kprobe_arm_test_cases(void); +#endif |