aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-at91/board-dt.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-at91/board-dt.c')
-rw-r--r--arch/arm/mach-at91/board-dt.c123
1 files changed, 123 insertions, 0 deletions
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
new file mode 100644
index 0000000..0b7d327
--- /dev/null
+++ b/arch/arm/mach-at91/board-dt.c
@@ -0,0 +1,123 @@
+/*
+ * Setup code for AT91SAM Evaluation Kits with Device Tree support
+ *
+ * Covers: * AT91SAM9G45-EKES board
+ * * AT91SAM9M10-EKES board
+ * * AT91SAM9M10G45-EK board
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/system_rev.h>
+#include <mach/at91sam9_smc.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init ek_init_early(void)
+{
+ /* Initialize processor: 12.000 MHz crystal */
+ at91_initialize(12000000);
+
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+/* det_pin is not connected */
+static struct atmel_nand_data __initdata ek_nand_data = {
+ .ale = 21,
+ .cle = 22,
+ .rdy_pin = AT91_PIN_PC8,
+ .enable_pin = AT91_PIN_PC14,
+};
+
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 2,
+ .ncs_write_setup = 0,
+ .nwe_setup = 2,
+
+ .ncs_read_pulse = 4,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 4,
+ .nwe_pulse = 4,
+
+ .read_cycle = 7,
+ .write_cycle = 7,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+ .tdf_cycles = 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+ ek_nand_data.bus_width_16 = board_have_nand_16bit();
+ /* setup bus-width (8 or 16) */
+ if (ek_nand_data.bus_width_16)
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+ else
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &ek_nand_smc_config);
+
+ at91_add_device_nand(&ek_nand_data);
+}
+
+static const struct of_device_id aic_of_match[] __initconst = {
+ { .compatible = "atmel,at91rm9200-aic", },
+ {},
+};
+
+static void __init at91_dt_init_irq(void)
+{
+ irq_domain_generate_simple(aic_of_match, 0xfffff000, 0);
+ at91_init_irq_default();
+}
+
+static void __init at91_dt_device_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+ /* NAND */
+ ek_add_device_nand();
+}
+
+static const char *at91_dt_board_compat[] __initdata = {
+ "atmel,at91sam9m10g45ek",
+ "calao,usb-a9g20",
+ NULL
+};
+
+DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
+ /* Maintainer: Atmel */
+ .timer = &at91sam926x_timer,
+ .map_io = at91_map_io,
+ .init_early = ek_init_early,
+ .init_irq = at91_dt_init_irq,
+ .init_machine = at91_dt_device_init,
+ .dt_compat = at91_dt_board_compat,
+MACHINE_END