diff options
Diffstat (limited to 'arch/arm/mach-ep93xx/include/mach')
| -rw-r--r-- | arch/arm/mach-ep93xx/include/mach/clkdev.h | 11 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/include/mach/debug-macro.S | 2 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/include/mach/dma.h | 190 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 1 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/include/mach/gpio.h | 121 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/include/mach/hardware.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-ep93xx/include/mach/ts72xx.h | 26 |
8 files changed, 94 insertions, 261 deletions
diff --git a/arch/arm/mach-ep93xx/include/mach/clkdev.h b/arch/arm/mach-ep93xx/include/mach/clkdev.h deleted file mode 100644 index 50cb991..0000000 --- a/arch/arm/mach-ep93xx/include/mach/clkdev.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/clkdev.h - */ - -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S index b25bc907..af54e43 100644 --- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S @@ -11,7 +11,7 @@ */ #include <mach/ep93xx-regs.h> - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rp, =EP93XX_APB_PHYS_BASE @ Physical base ldr \rv, =EP93XX_APB_VIRT_BASE @ virtual base orr \rp, \rp, #0x000c0000 diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h index 5e31b2b..46d4d87 100644 --- a/arch/arm/mach-ep93xx/include/mach/dma.h +++ b/arch/arm/mach-ep93xx/include/mach/dma.h @@ -1,149 +1,93 @@ -/** - * DOC: EP93xx DMA M2P memory to peripheral and peripheral to memory engine - * - * The EP93xx DMA M2P subsystem handles DMA transfers between memory and - * peripherals. DMA M2P channels are available for audio, UARTs and IrDA. - * See chapter 10 of the EP93xx users guide for full details on the DMA M2P - * engine. - * - * See sound/soc/ep93xx/ep93xx-pcm.c for an example use of the DMA M2P code. - * - */ - #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#include <linux/list.h> #include <linux/types.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> -/** - * struct ep93xx_dma_buffer - Information about a buffer to be transferred - * using the DMA M2P engine +/* + * M2P channels. * - * @list: Entry in DMA buffer list - * @bus_addr: Physical address of the buffer - * @size: Size of the buffer in bytes + * Note that these values are also directly used for setting the PPALLOC + * register. */ -struct ep93xx_dma_buffer { - struct list_head list; - u32 bus_addr; - u16 size; -}; +#define EP93XX_DMA_I2S1 0 +#define EP93XX_DMA_I2S2 1 +#define EP93XX_DMA_AAC1 2 +#define EP93XX_DMA_AAC2 3 +#define EP93XX_DMA_AAC3 4 +#define EP93XX_DMA_I2S3 5 +#define EP93XX_DMA_UART1 6 +#define EP93XX_DMA_UART2 7 +#define EP93XX_DMA_UART3 8 +#define EP93XX_DMA_IRDA 9 +/* M2M channels */ +#define EP93XX_DMA_SSP 10 +#define EP93XX_DMA_IDE 11 /** - * struct ep93xx_dma_m2p_client - Information about a DMA M2P client - * - * @name: Unique name for this client - * @flags: Client flags - * @cookie: User data to pass to callback functions - * @buffer_started: Non NULL function to call when a transfer is started. - * The arguments are the user data cookie and the DMA - * buffer which is starting. - * @buffer_finished: Non NULL function to call when a transfer is completed. - * The arguments are the user data cookie, the DMA buffer - * which has completed, and a boolean flag indicating if - * the transfer had an error. + * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine + * @port: peripheral which is requesting the channel + * @direction: TX/RX channel + * @name: optional name for the channel, this is displayed in /proc/interrupts + * + * This information is passed as private channel parameter in a filter + * function. Note that this is only needed for slave/cyclic channels. For + * memcpy channels %NULL data should be passed. */ -struct ep93xx_dma_m2p_client { - char *name; - u8 flags; - void *cookie; - void (*buffer_started)(void *cookie, - struct ep93xx_dma_buffer *buf); - void (*buffer_finished)(void *cookie, - struct ep93xx_dma_buffer *buf, - int bytes, int error); - - /* private: Internal use only */ - void *channel; +struct ep93xx_dma_data { + int port; + enum dma_data_direction direction; + const char *name; }; -/* DMA M2P ports */ -#define EP93XX_DMA_M2P_PORT_I2S1 0x00 -#define EP93XX_DMA_M2P_PORT_I2S2 0x01 -#define EP93XX_DMA_M2P_PORT_AAC1 0x02 -#define EP93XX_DMA_M2P_PORT_AAC2 0x03 -#define EP93XX_DMA_M2P_PORT_AAC3 0x04 -#define EP93XX_DMA_M2P_PORT_I2S3 0x05 -#define EP93XX_DMA_M2P_PORT_UART1 0x06 -#define EP93XX_DMA_M2P_PORT_UART2 0x07 -#define EP93XX_DMA_M2P_PORT_UART3 0x08 -#define EP93XX_DMA_M2P_PORT_IRDA 0x09 -#define EP93XX_DMA_M2P_PORT_MASK 0x0f - -/* DMA M2P client flags */ -#define EP93XX_DMA_M2P_TX 0x00 /* Memory to peripheral */ -#define EP93XX_DMA_M2P_RX 0x10 /* Peripheral to memory */ - -/* - * DMA M2P client error handling flags. See the EP93xx users guide - * documentation on the DMA M2P CONTROL register for more details - */ -#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20 /* Abort on peripheral error */ -#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40 /* Ignore peripheral errors */ -#define EP93XX_DMA_M2P_ERROR_MASK 0x60 /* Mask of error bits */ - /** - * ep93xx_dma_m2p_client_register - Register a client with the DMA M2P - * subsystem - * - * @m2p: Client information to register - * returns 0 on success - * - * The DMA M2P subsystem allocates a channel and an interrupt line for the DMA - * client + * struct ep93xx_dma_chan_data - platform specific data for a DMA channel + * @name: name of the channel, used for getting the right clock for the channel + * @base: mapped registers + * @irq: interrupt number used by this channel */ -int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p); +struct ep93xx_dma_chan_data { + const char *name; + void __iomem *base; + int irq; +}; /** - * ep93xx_dma_m2p_client_unregister - Unregister a client from the DMA M2P - * subsystem - * - * @m2p: Client to unregister + * struct ep93xx_dma_platform_data - platform data for the dmaengine driver + * @channels: array of channels which are passed to the driver + * @num_channels: number of channels in the array * - * Any transfers currently in progress will be completed in hardware, but - * ignored in software. + * This structure is passed to the DMA engine driver via platform data. For + * M2P channels, contract is that even channels are for TX and odd for RX. + * There is no requirement for the M2M channels. */ -void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p); +struct ep93xx_dma_platform_data { + struct ep93xx_dma_chan_data *channels; + size_t num_channels; +}; -/** - * ep93xx_dma_m2p_submit - Submit a DMA M2P transfer - * - * @m2p: DMA Client to submit the transfer on - * @buf: DMA Buffer to submit - * - * If the current or next transfer positions are free on the M2P client then - * the transfer is started immediately. If not, the transfer is added to the - * list of pending transfers. This function must not be called from the - * buffer_finished callback for an M2P channel. - * - */ -void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p, - struct ep93xx_dma_buffer *buf); +static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p"); +} /** - * ep93xx_dma_m2p_submit_recursive - Put a DMA transfer on the pending list - * for an M2P channel + * ep93xx_dma_chan_direction - returns direction the channel can be used + * @chan: channel * - * @m2p: DMA Client to submit the transfer on - * @buf: DMA Buffer to submit - * - * This function must only be called from the buffer_finished callback for an - * M2P channel. It is commonly used to add the next transfer in a chained list - * of DMA transfers. + * This function can be used in filter functions to find out whether the + * channel supports given DMA direction. Only M2P channels have such + * limitation, for M2M channels the direction is configurable. */ -void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p, - struct ep93xx_dma_buffer *buf); +static inline enum dma_data_direction +ep93xx_dma_chan_direction(struct dma_chan *chan) +{ + if (!ep93xx_dma_chan_is_m2p(chan)) + return DMA_NONE; -/** - * ep93xx_dma_m2p_flush - Flush all pending transfers on a DMA M2P client - * - * @m2p: DMA client to flush transfers on - * - * Any transfers currently in progress will be completed in hardware, but - * ignored in software. - * - */ -void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p); + /* even channels are for TX, odd for RX */ + return (chan->chan_id % 2 == 0) ? DMA_TO_DEVICE : DMA_FROM_DEVICE; +} #endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index 9ac4d10..c4a7b84 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -98,6 +98,7 @@ #define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000) +#define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000) #define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000) #define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) #define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h index 0a37961..9bb63ac 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h @@ -7,9 +7,11 @@ struct spi_device; * struct ep93xx_spi_info - EP93xx specific SPI descriptor * @num_chipselect: number of chip selects on this board, must be * at least one + * @use_dma: use DMA for the transfers */ struct ep93xx_spi_info { int num_chipselect; + bool use_dma; }; /** diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h index c57152c..40a8c17 100644 --- a/arch/arm/mach-ep93xx/include/mach/gpio.h +++ b/arch/arm/mach-ep93xx/include/mach/gpio.h @@ -1,120 +1 @@ -/* - * arch/arm/mach-ep93xx/include/mach/gpio.h - */ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -/* GPIO port A. */ -#define EP93XX_GPIO_LINE_A(x) ((x) + 0) -#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0) -#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1) -#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2) -#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3) -#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4) -#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5) -#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6) -#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7) - -/* GPIO port B. */ -#define EP93XX_GPIO_LINE_B(x) ((x) + 8) -#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0) -#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1) -#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2) -#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3) -#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4) -#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5) -#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6) -#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7) - -/* GPIO port C. */ -#define EP93XX_GPIO_LINE_C(x) ((x) + 40) -#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0) -#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1) -#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2) -#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3) -#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4) -#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5) -#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6) -#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7) - -/* GPIO port D. */ -#define EP93XX_GPIO_LINE_D(x) ((x) + 24) -#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0) -#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1) -#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2) -#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3) -#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4) -#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5) -#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6) -#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7) - -/* GPIO port E. */ -#define EP93XX_GPIO_LINE_E(x) ((x) + 32) -#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0) -#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1) -#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2) -#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3) -#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4) -#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5) -#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6) -#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7) - -/* GPIO port F. */ -#define EP93XX_GPIO_LINE_F(x) ((x) + 16) -#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0) -#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1) -#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2) -#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3) -#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4) -#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5) -#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6) -#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7) - -/* GPIO port G. */ -#define EP93XX_GPIO_LINE_G(x) ((x) + 48) -#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0) -#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1) -#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2) -#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3) -#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4) -#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5) -#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6) -#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7) - -/* GPIO port H. */ -#define EP93XX_GPIO_LINE_H(x) ((x) + 56) -#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0) -#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1) -#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2) -#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3) -#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4) -#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5) -#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6) -#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7) - -/* maximum value for gpio line identifiers */ -#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7) - -/* maximum value for irq capable line identifiers */ -#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7) - -/* new generic GPIO API - see Documentation/gpio.txt */ - -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep - -/* - * Map GPIO A0..A7 (0..7) to irq 64..71, - * B0..B7 (7..15) to irq 72..79, and - * F0..F7 (16..24) to irq 80..87. - */ -#define gpio_to_irq(gpio) \ - (((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL) - -#define irq_to_gpio(irq) ((irq) - gpio_to_irq(0)) - -#endif +/* empty */ diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h index 5a3ce02..4df8428 100644 --- a/arch/arm/mach-ep93xx/include/mach/hardware.h +++ b/arch/arm/mach-ep93xx/include/mach/hardware.h @@ -8,8 +8,6 @@ #include <mach/ep93xx-regs.h> #include <mach/platform.h> -#define pcibios_assign_all_busses() 0 - /* * The EP93xx has two external crystal oscillators. To generate the * required high-frequency clocks, the processor uses two phase-locked- diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h index 0eabec6..f1397a1 100644 --- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h +++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h @@ -6,7 +6,7 @@ * TS72xx memory map: * * virt phys size - * febff000 22000000 4K model number register + * febff000 22000000 4K model number register (bits 0-2) * febfe000 22400000 4K options register * febfd000 22800000 4K options register #2 * febf9000 10800000 4K TS-5620 RTC index register @@ -20,6 +20,9 @@ #define TS72XX_MODEL_TS7200 0x00 #define TS72XX_MODEL_TS7250 0x01 #define TS72XX_MODEL_TS7260 0x02 +#define TS72XX_MODEL_TS7300 0x03 +#define TS72XX_MODEL_TS7400 0x04 +#define TS72XX_MODEL_MASK 0x07 #define TS72XX_OPTIONS_PHYS_BASE 0x22400000 @@ -51,19 +54,34 @@ #ifndef __ASSEMBLY__ +static inline int ts72xx_model(void) +{ + return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK; +} + static inline int board_is_ts7200(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200; + return ts72xx_model() == TS72XX_MODEL_TS7200; } static inline int board_is_ts7250(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250; + return ts72xx_model() == TS72XX_MODEL_TS7250; } static inline int board_is_ts7260(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260; + return ts72xx_model() == TS72XX_MODEL_TS7260; +} + +static inline int board_is_ts7300(void) +{ + return ts72xx_model() == TS72XX_MODEL_TS7300; +} + +static inline int board_is_ts7400(void) +{ + return ts72xx_model() == TS72XX_MODEL_TS7400; } static inline int is_max197_installed(void) |