diff options
Diffstat (limited to 'arch/arm/mach-exynos/include/mach/msm_smd.h')
-rw-r--r-- | arch/arm/mach-exynos/include/mach/msm_smd.h | 383 |
1 files changed, 383 insertions, 0 deletions
diff --git a/arch/arm/mach-exynos/include/mach/msm_smd.h b/arch/arm/mach-exynos/include/mach/msm_smd.h new file mode 100644 index 0000000..d896013 --- /dev/null +++ b/arch/arm/mach-exynos/include/mach/msm_smd.h @@ -0,0 +1,383 @@ +/* linux/include/asm-arm/arch-msm/msm_smd.h + * + * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2009-2012, Code Aurora Forum. All rights reserved. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ASM_ARCH_MSM_SMD_H +#define __ASM_ARCH_MSM_SMD_H + +#include <linux/io.h> +#include <mach/msm_smsm.h> + +typedef struct smd_channel smd_channel_t; + +#define SMD_MAX_CH_NAME_LEN 20 /* includes null char at end */ + +#define SMD_EVENT_DATA 1 +#define SMD_EVENT_OPEN 2 +#define SMD_EVENT_CLOSE 3 +#define SMD_EVENT_STATUS 4 +#define SMD_EVENT_REOPEN_READY 5 + +/* + * SMD Processor ID's. + * + * For all processors that have both SMSM and SMD clients, + * the SMSM Processor ID and the SMD Processor ID will + * be the same. In cases where a processor only supports + * SMD, the entry will only exist in this enum. + */ +enum { + SMD_APPS = SMSM_APPS, + SMD_MODEM = SMSM_MODEM, + SMD_Q6 = SMSM_Q6, + SMD_WCNSS = SMSM_WCNSS, + SMD_DSPS = SMSM_DSPS, + SMD_MODEM_Q6_FW, + SMD_RPM, + NUM_SMD_SUBSYSTEMS, +}; + +enum { + SMD_APPS_MODEM = 0, + SMD_APPS_QDSP, + SMD_MODEM_QDSP, + SMD_APPS_DSPS, + SMD_MODEM_DSPS, + SMD_QDSP_DSPS, + SMD_APPS_WCNSS, + SMD_MODEM_WCNSS, + SMD_QDSP_WCNSS, + SMD_DSPS_WCNSS, + SMD_APPS_Q6FW, + SMD_MODEM_Q6FW, + SMD_QDSP_Q6FW, + SMD_DSPS_Q6FW, + SMD_WCNSS_Q6FW, + SMD_APPS_RPM, + SMD_MODEM_RPM, + SMD_QDSP_RPM, + SMD_WCNSS_RPM, + SMD_NUM_TYPE, + SMD_LOOPBACK_TYPE = 100, + +}; + +/* + * SMD IRQ Configuration + * + * Used to initialize IRQ configurations from platform data + * + * @irq_name: irq_name to query platform data + * @irq_id: initialized to -1 in platform data, stores actual irq id on + * successful registration + * @out_base: if not null then settings used for outgoing interrupt + * initialied from platform data + */ + +struct smd_irq_config { + /* incoming interrupt config */ + const char *irq_name; + unsigned long flags; + int irq_id; + const char *device_name; + const void *dev_id; + + /* outgoing interrupt config */ + uint32_t out_bit_pos; + void __iomem *out_base; + uint32_t out_offset; +}; + +/* + * SMD subsystem configurations + * + * SMD subsystems configurations for platform data. This contains the + * M2A and A2M interrupt configurations for both SMD and SMSM per + * subsystem. + * + * @subsys_name: name of subsystem passed to PIL + * @irq_config_id: unique id for each subsystem + * @edge: maps to actual remote subsystem edge + * + */ +struct smd_subsystem_config { + unsigned irq_config_id; + const char *subsys_name; + int edge; + + struct smd_irq_config smd_int; + struct smd_irq_config smsm_int; + +}; + +/* + * Subsystem Restart Configuration + * + * @disable_smsm_reset_handshake + */ +struct smd_subsystem_restart_config { + int disable_smsm_reset_handshake; +}; + +struct smd_platform { + uint32_t num_ss_configs; + struct smd_subsystem_config *smd_ss_configs; + struct smd_subsystem_restart_config *smd_ssr_config; +}; + +#ifdef CONFIG_MSM_SMD +/* warning: notify() may be called before open returns */ +int smd_open(const char *name, smd_channel_t **ch, void *priv, + void (*notify)(void *priv, unsigned event)); + +int smd_close(smd_channel_t *ch); + +/* passing a null pointer for data reads and discards */ +int smd_read(smd_channel_t *ch, void *data, int len); +int smd_read_from_cb(smd_channel_t *ch, void *data, int len); +/* Same as smd_read() but takes a data buffer from userspace + * The function might sleep. Only safe to call from user context + */ +int smd_read_user_buffer(smd_channel_t *ch, void *data, int len); + +/* Write to stream channels may do a partial write and return +** the length actually written. +** Write to packet channels will never do a partial write -- +** it will return the requested length written or an error. +*/ +int smd_write(smd_channel_t *ch, const void *data, int len); +/* Same as smd_write() but takes a data buffer from userspace + * The function might sleep. Only safe to call from user context + */ +int smd_write_user_buffer(smd_channel_t *ch, const void *data, int len); + +int smd_write_avail(smd_channel_t *ch); +int smd_read_avail(smd_channel_t *ch); + +/* Returns the total size of the current packet being read. +** Returns 0 if no packets available or a stream channel. +*/ +int smd_cur_packet_size(smd_channel_t *ch); + + +#if 0 +/* these are interruptable waits which will block you until the specified +** number of bytes are readable or writable. +*/ +int smd_wait_until_readable(smd_channel_t *ch, int bytes); +int smd_wait_until_writable(smd_channel_t *ch, int bytes); +#endif + +/* these are used to get and set the IF sigs of a channel. + * DTR and RTS can be set; DSR, CTS, CD and RI can be read. + */ +int smd_tiocmget(smd_channel_t *ch); +int smd_tiocmset(smd_channel_t *ch, unsigned int set, unsigned int clear); +int +smd_tiocmset_from_cb(smd_channel_t *ch, unsigned int set, unsigned int clear); +int smd_named_open_on_edge(const char *name, uint32_t edge, smd_channel_t **_ch, + void *priv, void (*notify)(void *, unsigned)); + +/* Tells the other end of the smd channel that this end wants to recieve + * interrupts when the written data is read. Read interrupts should only + * enabled when there is no space left in the buffer to write to, thus the + * interrupt acts as notification that space may be avaliable. If the + * other side does not support enabling/disabling interrupts on demand, + * then this function has no effect if called. + */ +void smd_enable_read_intr(smd_channel_t *ch); + +/* Tells the other end of the smd channel that this end does not want + * interrupts when written data is read. The interrupts should be + * disabled by default. If the other side does not support enabling/ + * disabling interrupts on demand, then this function has no effect if + * called. + */ +void smd_disable_read_intr(smd_channel_t *ch); + +/* Starts a packet transaction. The size of the packet may exceed the total + * size of the smd ring buffer. + * + * @ch: channel to write the packet to + * @len: total length of the packet + * + * Returns: + * 0 - success + * -ENODEV - invalid smd channel + * -EACCES - non-packet channel specified + * -EINVAL - invalid length + * -EBUSY - transaction already in progress + * -EAGAIN - no enough memory in ring buffer to start transaction + * -EPERM - unable to sucessfully start transaction due to write error + */ +int smd_write_start(smd_channel_t *ch, int len); + +/* Writes a segment of the packet for a packet transaction. + * + * @ch: channel to write packet to + * @data: buffer of data to write + * @len: length of data buffer + * @user_buf: (0) - buffer from kernelspace (1) - buffer from userspace + * + * Returns: + * number of bytes written + * -ENODEV - invalid smd channel + * -EINVAL - invalid length + * -ENOEXEC - transaction not started + */ +int smd_write_segment(smd_channel_t *ch, void *data, int len, int user_buf); + +/* Completes a packet transaction. Do not call from interrupt context. + * + * @ch: channel to complete transaction on + * + * Returns: + * 0 - success + * -ENODEV - invalid smd channel + * -E2BIG - some ammount of packet is not yet written + */ +int smd_write_end(smd_channel_t *ch); + +/* + * Returns a pointer to the subsystem name or NULL if no + * subsystem name is available. + * + * @type - Edge definition + */ +const char *smd_edge_to_subsystem(uint32_t type); + +/* + * Returns a pointer to the subsystem name given the + * remote processor ID. + * + * @pid Remote processor ID + * @returns Pointer to subsystem name or NULL if not found + */ +const char *smd_pid_to_subsystem(uint32_t pid); +#else + +static inline int smd_open(const char *name, smd_channel_t **ch, void *priv, + void (*notify)(void *priv, unsigned event)) +{ + return -ENODEV; +} + +static inline int smd_close(smd_channel_t *ch) +{ + return -ENODEV; +} + +static inline int smd_read(smd_channel_t *ch, void *data, int len) +{ + return -ENODEV; +} + +static inline int smd_read_from_cb(smd_channel_t *ch, void *data, int len) +{ + return -ENODEV; +} + +static inline int smd_read_user_buffer(smd_channel_t *ch, void *data, int len) +{ + return -ENODEV; +} + +static inline int smd_write(smd_channel_t *ch, const void *data, int len) +{ + return -ENODEV; +} + +static inline int +smd_write_user_buffer(smd_channel_t *ch, const void *data, int len) +{ + return -ENODEV; +} + +static inline int smd_write_avail(smd_channel_t *ch) +{ + return -ENODEV; +} + +static inline int smd_read_avail(smd_channel_t *ch) +{ + return -ENODEV; +} + +static inline int smd_cur_packet_size(smd_channel_t *ch) +{ + return -ENODEV; +} + +static inline int smd_tiocmget(smd_channel_t *ch) +{ + return -ENODEV; +} + +static inline int +smd_tiocmset(smd_channel_t *ch, unsigned int set, unsigned int clear) +{ + return -ENODEV; +} + +static inline int +smd_tiocmset_from_cb(smd_channel_t *ch, unsigned int set, unsigned int clear) +{ + return -ENODEV; +} + +static inline int +smd_named_open_on_edge(const char *name, uint32_t edge, smd_channel_t **_ch, + void *priv, void (*notify)(void *, unsigned)) +{ + return -ENODEV; +} + +static inline void smd_enable_read_intr(smd_channel_t *ch) +{ +} + +static inline void smd_disable_read_intr(smd_channel_t *ch) +{ +} + +static inline int smd_write_start(smd_channel_t *ch, int len) +{ + return -ENODEV; +} + +static inline int +smd_write_segment(smd_channel_t *ch, void *data, int len, int user_buf) +{ + return -ENODEV; +} + +static inline int smd_write_end(smd_channel_t *ch) +{ + return -ENODEV; +} + +static inline const char *smd_edge_to_subsystem(uint32_t type) +{ + return NULL; +} + +static inline const char *smd_pid_to_subsystem(uint32_t pid) +{ + return NULL; +} +#endif + +#endif |