diff options
Diffstat (limited to 'arch/arm/mach-exynos/mach-kona.c')
| -rw-r--r-- | arch/arm/mach-exynos/mach-kona.c | 2160 |
1 files changed, 2160 insertions, 0 deletions
diff --git a/arch/arm/mach-exynos/mach-kona.c b/arch/arm/mach-exynos/mach-kona.c new file mode 100644 index 0000000..e5eee12 --- /dev/null +++ b/arch/arm/mach-exynos/mach-kona.c @@ -0,0 +1,2160 @@ +/* linux/arch/arm/mach-exynos/mach-smdk4212.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/serial_core.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> +#include <linux/clk.h> +#include <linux/gpio.h> +#include <linux/gpio_event.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/pwm_backlight.h> +#include <linux/input.h> +#include <linux/mmc/host.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/max8649.h> +#include <linux/regulator/fixed.h> +#include <linux/power_supply.h> +#ifdef CONFIG_STMPE811_ADC +#include <linux/stmpe811-adc.h> +#endif +#include <linux/v4l2-mediabus.h> +#include <linux/memblock.h> +#include <linux/delay.h> +#include <linux/bootmem.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <plat/regs-serial.h> +#include <plat/exynos4.h> +#include <plat/cpu.h> +#include <plat/clock.h> +#include <plat/keypad.h> +#include <plat/devs.h> +#include <plat/fb-s5p.h> +#include <plat/fb-core.h> +#include <plat/regs-fb-v4.h> +#include <plat/backlight.h> +#include <plat/gpio-cfg.h> +#include <plat/iic.h> +#include <plat/pd.h> +#include <plat/sdhci.h> +#include <plat/mshci.h> +#include <plat/ehci.h> +#include <plat/usbgadget.h> +#include <plat/s3c64xx-spi.h> +#include <plat/tvout.h> +#include <plat/csis.h> +#include <plat/media.h> +#include <plat/adc.h> +#include <media/exynos_fimc_is.h> +#include <mach/exynos-ion.h> + +#include <mach/map.h> +#include <mach/spi-clocks.h> + +#include <mach/dev.h> +#include <mach/ppmu.h> + +#ifdef CONFIG_MFD_MAX77693 +#include <linux/mfd/max77693.h> +#include <linux/mfd/max77693-private.h> +#endif + +#ifdef CONFIG_BATTERY_MAX17047_FUELGAUGE +#include <linux/battery/max17047_fuelgauge.h> +#endif + +#ifdef CONFIG_BATTERY_MAX17047_C_FUELGAUGE +#include <linux/battery/max17047_fuelgauge_c.h> +#endif + +#if defined(CONFIG_BATTERY_SAMSUNG) +#include <linux/power_supply.h> +#include <linux/battery/samsung_battery.h> +#endif + +#ifdef CONFIG_BT_BCM4334 +#include <mach/board-bluetooth-bcm.h> +#endif + +#ifdef CONFIG_EXYNOS4_SETUP_THERMAL +#include <plat/s5p-tmu.h> +#include <mach/regs-tmu.h> +#endif + +#if defined(CONFIG_VIDEO_SAMSUNG_S5P_MFC) || defined(CONFIG_VIDEO_MFC5X) +#include <plat/s5p-mfc.h> +#endif + +#include <plat/fb-s5p.h> + +#ifdef CONFIG_FB_S5P_EXTDSP +struct s3cfb_extdsp_lcd { + int width; + int height; + int bpp; +}; +#endif +#include <mach/dev-sysmmu.h> + +#ifdef CONFIG_VIDEO_JPEG_V2X +#include <plat/jpeg.h> +#endif + +#include <plat/fimg2d.h> +#include <plat/s5p-sysmmu.h> + +#include <mach/sec_debug.h> + +#include <mach/kona-input.h> +#include <mach/midas-wacom.h> + +#include <mach/midas-power.h> +#ifdef CONFIG_SEC_THERMISTOR +#include <mach/sec_thermistor.h> +#endif +#include <mach/midas-thermistor.h> +#include <mach/midas-tsp.h> +#include <mach/regs-clock.h> + +#include <mach/midas-lcd.h> +#include <mach/midas-sound.h> +#ifdef CONFIG_USB_HOST_NOTIFY +#include <linux/host_notify.h> +#include <linux/pm_runtime.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> +#include <mach/usb_switch.h> +#endif + +#ifdef CONFIG_30PIN_CONN +#include <linux/30pin_con.h> +#endif + +#ifdef CONFIG_MOTOR_DRV_DRV2603 +#include <linux/drv2603_vibrator.h> +#endif + +#include "board-mobile.h" + +#ifdef CONFIG_IR_REMOCON_MC96 +#include <linux/ir_remote_con_mc96.h> +#endif +#ifdef CONFIG_MACH_KONA_SENSOR +#include <mach/kona-sensor.h> +#endif + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define SMDK4212_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define SMDK4212_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define SMDK4212_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +#define SMDK4212_UFCON_GPS (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG8 | \ + S5PV210_UFCON_RXTRIG32) + +static struct s3c2410_uartcfg smdk4212_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = SMDK4212_UCON_DEFAULT, + .ulcon = SMDK4212_ULCON_DEFAULT, + .ufcon = SMDK4212_UFCON_DEFAULT, +#ifdef CONFIG_BT_BCM4334 + .wake_peer = bcm_bt_lpm_exit_lpm_locked, +#endif + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = SMDK4212_UCON_DEFAULT, + .ulcon = SMDK4212_ULCON_DEFAULT, + .ufcon = SMDK4212_UFCON_GPS, +#ifndef CONFIG_QC_MODEM + .set_runstate = set_gps_uart_op, +#endif + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = SMDK4212_UCON_DEFAULT, + .ulcon = SMDK4212_ULCON_DEFAULT, + .ufcon = SMDK4212_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = SMDK4212_UCON_DEFAULT, + .ulcon = SMDK4212_ULCON_DEFAULT, + .ufcon = SMDK4212_UFCON_DEFAULT, + }, +}; + +static DEFINE_MUTEX(notify_lock); + +#define DEFINE_MMC_CARD_NOTIFIER(num) \ +static void (*hsmmc##num##_notify_func)(struct platform_device *, int state); \ +static int ext_cd_init_hsmmc##num(void (*notify_func)( \ + struct platform_device *, int state)) \ +{ \ + mutex_lock(¬ify_lock); \ + WARN_ON(hsmmc##num##_notify_func); \ + hsmmc##num##_notify_func = notify_func; \ + mutex_unlock(¬ify_lock); \ + return 0; \ +} \ +static int ext_cd_cleanup_hsmmc##num(void (*notify_func)( \ + struct platform_device *, int state)) \ +{ \ + mutex_lock(¬ify_lock); \ + WARN_ON(hsmmc##num##_notify_func != notify_func); \ + hsmmc##num##_notify_func = NULL; \ + mutex_unlock(¬ify_lock); \ + return 0; \ +} + +#ifdef CONFIG_S3C_DEV_HSMMC3 + DEFINE_MMC_CARD_NOTIFIER(3) +#endif + +/* + * call this when you need sd stack to recognize insertion or removal of card + * that can't be told by SDHCI regs + */ +void mmc_force_presence_change(struct platform_device *pdev) +{ + void (*notify_func)(struct platform_device *, int state) = NULL; + mutex_lock(¬ify_lock); +#ifdef CONFIG_S3C_DEV_HSMMC3 + if (pdev == &s3c_device_hsmmc3) + notify_func = hsmmc3_notify_func; +#endif + + if (notify_func) + notify_func(pdev, 1); + else + pr_warn("%s: called for device with no notifier\n", __func__); + mutex_unlock(¬ify_lock); +} +EXPORT_SYMBOL_GPL(mmc_force_presence_change); + +void mmc_force_presence_change_onoff(struct platform_device *pdev, int val) +{ + void (*notify_func)(struct platform_device *, int state) = NULL; + mutex_lock(¬ify_lock); +#ifdef CONFIG_S3C_DEV_HSMMC3 + if (pdev == &s3c_device_hsmmc3) + notify_func = hsmmc3_notify_func; +#endif + + if (notify_func) + notify_func(pdev, val); + else + pr_warn("%s: called for device with no notifier\n", __func__); + mutex_unlock(¬ify_lock); +} +EXPORT_SYMBOL_GPL(mmc_force_presence_change_onoff); + +#ifdef CONFIG_S3C_DEV_HSMMC +static struct s3c_sdhci_platdata smdk4212_hsmmc0_pdata __initdata = { + .cd_type = S3C_MSHCI_CD_PERMANENT, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA, +#endif +}; +#endif + +#ifdef CONFIG_S3C_DEV_HSMMC1 +static struct s3c_sdhci_platdata smdk4212_hsmmc1_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_INTERNAL, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; +#endif + +#ifdef CONFIG_S3C_DEV_HSMMC2 +static struct s3c_sdhci_platdata smdk4212_hsmmc2_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = EXYNOS4_GPX3(4), + .ext_cd_gpio_invert = true, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, + .vmmc_name = "vtf_2.8v" +#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA, +#endif +}; +#endif + +#ifdef CONFIG_S3C_DEV_HSMMC3 +static struct s3c_sdhci_platdata smdk4212_hsmmc3_pdata __initdata = { +/* new code for brm4334 */ + .cd_type = S3C_SDHCI_CD_EXTERNAL, + + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, + .pm_flags = S3C_SDHCI_PM_IGNORE_SUSPEND_RESUME, + .ext_cd_init = ext_cd_init_hsmmc3, + .ext_cd_cleanup = ext_cd_cleanup_hsmmc3, +}; +#endif + +#ifdef CONFIG_EXYNOS4_DEV_MSHC +static struct s3c_mshci_platdata exynos4_mshc_pdata __initdata = { + .cd_type = S3C_MSHCI_CD_PERMANENT, + .fifo_depth = 0x80, +#if defined(CONFIG_EXYNOS4_MSHC_8BIT) && \ + defined(CONFIG_EXYNOS4_MSHC_DDR) + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA | MMC_CAP_1_8V_DDR | + MMC_CAP_UHS_DDR50 | MMC_CAP_CMD23, + .host_caps2 = MMC_CAP2_PACKED_CMD | MMC_CAP2_POWEROFF_NOTIFY, +#elif defined(CONFIG_EXYNOS4_MSHC_8BIT) + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA | MMC_CAP_CMD23, +#elif defined(CONFIG_EXYNOS4_MSHC_DDR) + .host_caps = MMC_CAP_1_8V_DDR | MMC_CAP_UHS_DDR50 | + MMC_CAP_CMD23, +#endif + .int_power_gpio = GPIO_eMMC_EN, +}; +#endif + +#ifdef CONFIG_USB_EHCI_S5P +static struct s5p_ehci_platdata smdk4212_ehci_pdata; + +static void __init smdk4212_ehci_init(void) +{ + struct s5p_ehci_platdata *pdata = &smdk4212_ehci_pdata; + + s5p_ehci_set_platdata(pdata); +} +#endif + +#ifdef CONFIG_USB_OHCI_S5P +static struct s5p_ohci_platdata smdk4212_ohci_pdata; + +static void __init smdk4212_ohci_init(void) +{ + struct s5p_ohci_platdata *pdata = &smdk4212_ohci_pdata; + + s5p_ohci_set_platdata(pdata); +} +#endif + +/* USB GADGET */ +#ifdef CONFIG_USB_GADGET +static struct s5p_usbgadget_platdata smdk4212_usbgadget_pdata; + +#include <linux/usb/android_composite.h> +static void __init smdk4212_usbgadget_init(void) +{ + struct s5p_usbgadget_platdata *pdata = &smdk4212_usbgadget_pdata; + struct android_usb_platform_data *android_pdata = + s3c_device_android_usb.dev.platform_data; + if (android_pdata) { + unsigned int newluns = 0; + unsigned int cdfs = 1; + + printk(KERN_DEBUG "usb: %s: default luns=%d, new luns=%d\n", + __func__, android_pdata->nluns, newluns); + android_pdata->nluns = newluns; + android_pdata->cdfs_support = cdfs; + } else { + printk(KERN_DEBUG "usb: %s android_pdata is not available\n", + __func__); + } + +#if defined(CONFIG_MACH_KONA_EUR_LTE) || defined(CONFIG_MACH_KONALTE_USA_ATT) + s5p_usbgadget_set_platdata(pdata); + pdata = s3c_device_usbgadget.dev.platform_data; + if (pdata) { + /* Squelch Threshold Tune [13:11] (110 : -15%) */ + pdata->phy_tune_mask |= (0x7 << 11); + pdata->phy_tune |= (0x6 << 11); + printk(KERN_DEBUG "usb: %s tune_mask=0x%x, tune=0x%x\n", + __func__, pdata->phy_tune_mask, pdata->phy_tune); + } +#else + s5p_usbgadget_set_platdata(pdata); + pdata = s3c_device_usbgadget.dev.platform_data; + if (pdata) { + /* Squelch Threshold Tune [13:11] (010 : +5%) */ + pdata->phy_tune_mask |= (0x7 << 11); + pdata->phy_tune |= (0x2 << 11); + printk(KERN_DEBUG "usb: %s tune_mask=0x%x, tune=0x%x\n", + __func__, pdata->phy_tune_mask, pdata->phy_tune); + } +#endif +} +#endif + +#ifdef CONFIG_MFD_MAX77693 +#ifdef CONFIG_VIBETONZ +static struct max77693_haptic_platform_data max77693_haptic_pdata = { + .reg2 = MOTOR_LRA | EXT_PWM | DIVIDER_128, + .pwm_id = 0, + .init_hw = NULL, + .motor_en = NULL, + .max_timeout = 10000, + .duty = 35500, + .period = 37904, + .regulator_name = "vmotor", +}; +#endif + +#ifdef CONFIG_BATTERY_MAX77693_CHARGER +static struct max77693_charger_platform_data max77693_charger_pdata = { +#ifdef CONFIG_BATTERY_WPC_CHARGER + .wpc_irq_gpio = GPIO_WPC_INT, + .vbus_irq_gpio = GPIO_V_BUS_INT, + .wc_pwr_det = false, +#endif +}; +#endif + +extern struct max77693_muic_data max77693_muic; +extern struct max77693_regulator_data max77693_regulators; + +static bool is_muic_default_uart_path_cp(void) +{ + return false; +} + +struct max77693_platform_data exynos4_max77693_info = { + .irq_base = IRQ_BOARD_IFIC_START, + .irq_gpio = GPIO_IF_PMIC_IRQ, + .wakeup = 1, + .muic = &max77693_muic, + .is_default_uart_path_cp = is_muic_default_uart_path_cp, + .regulators = &max77693_regulators, + .num_regulators = MAX77693_REG_MAX, +#ifdef CONFIG_VIBETONZ + .haptic_data = &max77693_haptic_pdata, +#endif +#ifdef CONFIG_LEDS_MAX77693 + .led_data = &max77693_led_pdata, +#endif +#ifdef CONFIG_BATTERY_MAX77693_CHARGER + .charger_data = &max77693_charger_pdata, +#endif +}; +#endif + +/* I2C0 */ +static struct i2c_board_info i2c_devs0[] __initdata = { +}; + +#ifdef CONFIG_S3C_DEV_I2C5 +static struct i2c_board_info i2c_devs5[] __initdata = { +}; +struct s3c2410_platform_i2c default_i2c5_data __initdata = { + .bus_num = 5, + .flags = 0, + .slave_addr = 0x10, + .frequency = 100*1000, + .sda_delay = 100, +}; +#endif + +static struct i2c_board_info i2c_devs7[] __initdata = { +#if defined(CONFIG_REGULATOR_MAX77686) /* max77686 on i2c7 with M1 board */ + { + I2C_BOARD_INFO("max77686", (0x12 >> 1)), + .platform_data = &exynos4_max77686_info, + }, +#endif +}; + +/* Bluetooth */ +#ifdef CONFIG_BT_BCM4334 +static struct platform_device bcm4334_bluetooth_device = { + .name = "bcm4334_bluetooth", + .id = -1, +}; +#endif + +/* I2C9 */ +static struct i2c_board_info i2c_devs9_emul[] __initdata = { +}; + +/* I2C11 */ +static struct i2c_board_info i2c_devs11_emul[] __initdata = { +}; + +#if defined (CONFIG_BATTERY_MAX17047_FUELGAUGE) || defined(CONFIG_BATTERY_MAX17047_C_FUELGAUGE) +static struct i2c_gpio_platform_data gpio_i2c_data14 = { + .sda_pin = GPIO_FUEL_SDA, + .scl_pin = GPIO_FUEL_SCL, +}; + +struct platform_device s3c_device_i2c14 = { + .name = "i2c-gpio", + .id = 14, + .dev.platform_data = &gpio_i2c_data14, +}; + +static struct max17047_platform_data max17047_pdata = { + .irq_gpio = GPIO_FUEL_ALERT, +}; + +/* I2C14 */ +static struct i2c_board_info i2c_devs14_emul[] __initdata = { + { + I2C_BOARD_INFO("max17047-fuelgauge", 0x36), + .platform_data = &max17047_pdata, + }, +}; +#endif + +/* I2C15 */ +static struct i2c_gpio_platform_data gpio_i2c_data15 = { + .sda_pin = GPIO_MHL_SDA_1_8V, + .scl_pin = GPIO_MHL_SCL_1_8V, + .udelay = 3, + .timeout = 0, +}; + +struct platform_device s3c_device_i2c15 = { + .name = "i2c-gpio", + .id = 15, + .dev = { + .platform_data = &gpio_i2c_data15, + } +}; + +static struct i2c_board_info i2c_devs15_emul[] __initdata = { +}; + +#if defined(CONFIG_MFD_MAX77693) +static struct i2c_gpio_platform_data gpio_i2c_data17 = { + .sda_pin = GPIO_IF_PMIC_SDA, + .scl_pin = GPIO_IF_PMIC_SCL, +}; + +struct platform_device s3c_device_i2c17 = { + .name = "i2c-gpio", + .id = 17, + .dev.platform_data = &gpio_i2c_data17, +}; + +/* I2C17 */ +static struct i2c_board_info i2c_devs17_emul[] __initdata = { + { + I2C_BOARD_INFO("max77693", (0xCC >> 1)), + .platform_data = &exynos4_max77693_info, + } +}; +#endif + +#if 0 +static struct i2c_gpio_platform_data i2c18_platdata = { + .sda_pin = GPIO_8M_CAM_SDA_18V, + .scl_pin = GPIO_8M_CAM_SCL_18V, + .udelay = 2, /* 250 kHz */ + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .scl_is_output_only = 0, +}; + +static struct platform_device s3c_device_i2c18 = { + .name = "i2c-gpio", + .id = 18, + .dev.platform_data = &i2c18_platdata, +}; + +/* I2C18 */ +/* No explicit i2c client array here. The channel number 18 is passed + to camera driver from midas-camera.c instead. */ +#endif + +#if defined(CONFIG_STMPE811_ADC) +static struct i2c_gpio_platform_data gpio_i2c_data19 = { + .sda_pin = GPIO_ADC_SDA, + .scl_pin = GPIO_ADC_SCL, +}; + +struct platform_device s3c_device_i2c19 = { + .name = "i2c-gpio", + .id = 19, + .dev.platform_data = &gpio_i2c_data19, +}; + + +/* I2C19 */ +static struct i2c_board_info i2c_devs19_emul[] __initdata = { + { + I2C_BOARD_INFO("stmpe811-adc", (0x82 >> 1)), + .platform_data = &stmpe811_pdata, + }, +}; +#endif + +/* I2C22 */ +#ifdef CONFIG_IR_REMOCON_MC96 +static void irda_wake_en(bool onoff) +{ + gpio_direction_output(GPIO_IRDA_WAKE, onoff); +#if 0 + printk(KERN_ERR "%s: irda_wake_en : %d\n", __func__, onoff); +#endif +} + +static void irda_device_init(void) +{ + int ret; + + printk(KERN_ERR "%s called!\n", __func__); + + ret = gpio_request(GPIO_IRDA_WAKE, "irda_wake"); + if (ret) { + printk(KERN_ERR "%s: gpio_request fail[%d], ret = %d\n", + __func__, GPIO_IRDA_WAKE, ret); + return; + } + + ret = gpio_request(GPIO_IRDA_IRQ, "irda_irq"); + if (ret) { + printk(KERN_ERR "%s: gpio_request fail[%d], ret = %d\n", + __func__, GPIO_IRDA_IRQ, ret); + return; + } + + ret = gpio_request(GPIO_IRDA_EN, "irda_en"); + if (ret) { + printk(KERN_ERR "%s: gpio_request fail[%d], ret = %d\n", + __func__, GPIO_IRDA_EN, ret); + return; + } + + gpio_direction_output(GPIO_IRDA_WAKE, 0); + gpio_direction_output(GPIO_IRDA_EN, 0); + + s3c_gpio_cfgpin(GPIO_IRDA_IRQ, S3C_GPIO_INPUT); + s3c_gpio_setpull(GPIO_IRDA_IRQ, S3C_GPIO_PULL_UP); + gpio_direction_input(GPIO_IRDA_IRQ); + + return; +} + +static int vled_ic_onoff; + +static void irda_vdd_onoff(bool onoff) +{ + static struct regulator *vled_ic; + + if (onoff) { + gpio_set_value(GPIO_IRDA_EN, 1); + + vled_ic = regulator_get(NULL, "vled_ic_1.9v"); + if (IS_ERR(vled_ic)) { + pr_err("could not get regulator vled_ic_1.9v\n"); + return; + } + regulator_enable(vled_ic); + vled_ic_onoff = 1; + } else if (vled_ic_onoff == 1) { + gpio_set_value(GPIO_IRDA_EN, 0); + + if (regulator_is_enabled(vled_ic)) + regulator_force_disable(vled_ic); + regulator_put(vled_ic); + vled_ic_onoff = 0; + } +} + +static struct i2c_gpio_platform_data gpio_i2c_data22 = { + .sda_pin = GPIO_IRDA_SDA, + .scl_pin = GPIO_IRDA_SCL, + .udelay = 2, + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .scl_is_output_only = 0, +}; + +struct platform_device s3c_device_i2c22 = { + .name = "i2c-gpio", + .id = 22, + .dev.platform_data = &gpio_i2c_data22, +}; + +static struct mc96_platform_data mc96_pdata = { + .ir_wake_en = irda_wake_en, + .ir_vdd_onoff = irda_vdd_onoff, +}; + +static struct i2c_board_info i2c_devs22_emul[] __initdata = { + { + I2C_BOARD_INFO("mc96", (0XA0 >> 1)), + .platform_data = &mc96_pdata, + }, +}; +#endif + +#if 0 +#ifdef CONFIG_FB_S5P_NT71391 +static struct i2c_gpio_platform_data gpio_i2c_data23 = { + .scl_pin = GPIO_LCD_FREQ_SCL, + .sda_pin = GPIO_LCD_FREQ_SDA, +}; + +struct platform_device s3c_device_i2c23 = { + .name = "i2c-gpio", + .id = 23, + .dev.platform_data = &gpio_i2c_data23, +}; +#endif +#endif + +#ifdef CONFIG_BACKLIGHT_LP855X +static struct i2c_gpio_platform_data gpio_i2c_data24 = { + .scl_pin = GPIO_LED_BACKLIGHT_SCL, + .sda_pin = GPIO_LED_BACKLIGHT_SDA, +}; + +struct platform_device s3c_device_i2c24 = { + .name = "i2c-gpio", + .id = 24, + .dev.platform_data = &gpio_i2c_data24, +}; +#endif + +#ifdef CONFIG_ANDROID_RAM_CONSOLE +static struct resource ram_console_resource[] = { + { + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device ram_console_device = { + .name = "ram_console", + .id = -1, + .num_resources = ARRAY_SIZE(ram_console_resource), + .resource = ram_console_resource, +}; + +static int __init setup_ram_console_mem(char *str) +{ + unsigned size = memparse(str, &str); + + if (size && (*str == '@')) { + unsigned long long base = 0; + + base = simple_strtoul(++str, &str, 0); + if (reserve_bootmem(base, size, BOOTMEM_EXCLUSIVE)) { + pr_err("%s: failed reserving size %d " + "at base 0x%llx\n", __func__, size, base); + return -1; + } + + ram_console_resource[0].start = base; + ram_console_resource[0].end = base + size - 1; + pr_err("%s: %x at %llx\n", __func__, size, base); + } + return 0; +} + +__setup("ram_console=", setup_ram_console_mem); +#endif + +#if defined(CONFIG_BATTERY_SAMSUNG) +static struct samsung_battery_platform_data samsung_battery_pdata = { + /* charger */ + .charger_name = "max77693-charger", + .fuelgauge_name = "max17047-fuelgauge", + + /* voltage */ + .voltage_max = 4300000, + .voltage_min = 3400000, + .in_curr_limit = 1800, + + /* charging current */ + .chg_curr_ta = 1800, + .chg_curr_dock = 1700, + .chg_curr_siop_lv1 = 1500, + .chg_curr_siop_lv2 = 1000, + .chg_curr_siop_lv3 = 500, + .chg_curr_usb = 475, + .chg_curr_cdp = 1000, + .chg_curr_wpc = 475, + .chg_curr_etc = 475, + + /* charging param */ + .chng_interval = 30, + .chng_susp_interval = 30, + .norm_interval = 30, + .norm_susp_interval = 1800, + .emer_lv1_interval = 30, + .emer_lv2_interval = 10, + + /* recharging voltage */ + .recharge_voltage = 4257000, + + /* absolute timeer */ + .abstimer_charge_duration = 10 * 60 * 60, + .abstimer_charge_duration_wpc = 8 * 60 * 60, + .abstimer_recharge_duration = 1.5 * 60 * 60, + + .cb_det_src = CABLE_DET_CHARGER, + + /* temperature param */ + .overheat_stop_temp = 500, + .overheat_recovery_temp = 420, + .freeze_stop_temp = -50, + .freeze_recovery_temp = 0, + + /* ctia */ + .ctia_spec = false, + .event_time = 10 * 60, + + .temper_src = TEMPER_FUELGAUGE, + +#if defined(CONFIG_S3C_ADC) + .covert_adc = convert_adc, +#endif + + /* vf detect */ + .vf_det_src = VF_DET_UNKNOWN, + .vf_det_th_l = 100, + .vf_det_th_h = 1500, + +// .batt_present_gpio = GPIO_BATT_PRESENT_N_INT, + + .suspend_chging = true, + .led_indicator = false, + .battery_standever = false, +}; + +static struct platform_device samsung_device_battery = { + .name = "samsung-battery", + .id = -1, + .dev.platform_data = &samsung_battery_pdata, +}; + +#endif + +#ifdef CONFIG_USB_HOST_NOTIFY +#ifdef CONFIG_MFD_MAX77693 +static void otg_accessory_power(int enable) +{ + u8 on = (u8)!!enable; + int err; + + /* max77693 otg power control */ + otg_control(enable); +#if !defined(CONFIG_MACH_M3_USA_TMO) + err = gpio_request(GPIO_OTG_EN, "USB_OTG_EN"); + if (err) + printk(KERN_ERR "failed to request USB_OTG_EN\n"); + gpio_direction_output(GPIO_OTG_EN, on); + gpio_free(GPIO_OTG_EN); +#endif + pr_info("%s: otg accessory power = %d\n", __func__, on); +} + +static void otg_accessory_powered_booster(int enable) +{ + u8 on = (u8)!!enable; + + /* max77693 powered otg power control */ + powered_otg_control(enable); + pr_info("%s: otg accessory power = %d\n", __func__, on); +} + +static struct host_notifier_platform_data host_notifier_pdata = { + .ndev.name = "usb_otg", + .booster = otg_accessory_power, + .powered_booster = otg_accessory_powered_booster, + .thread_enable = 0, +}; + +struct platform_device host_notifier_device = { + .name = "host_notifier", + .dev.platform_data = &host_notifier_pdata, +}; +#else +static void px_usb_otg_power(int active); +#define HOST_NOTIFIER_BOOSTER px_usb_otg_power +#define HOST_NOTIFIER_GPIO GPIO_ACCESSORY_OUT_5V +#define RETRY_CNT_LIMIT 100 + +struct host_notifier_platform_data host_notifier_pdata = { + .ndev.name = "usb_otg", + .gpio = HOST_NOTIFIER_GPIO, + .booster = HOST_NOTIFIER_BOOSTER, + .irq_enable = 1, +}; + +struct platform_device host_notifier_device = { + .name = "host_notifier", + .dev.platform_data = &host_notifier_pdata, +}; + +static void __init acc_chk_gpio_init(void) +{ + int err; + err = gpio_request(GPIO_ACCESSORY_EN, "GPIO_USB_OTG_EN"); + if (err) + printk(KERN_DEBUG "%s gpio_request error!\n", __func__); + else { + s3c_gpio_cfgpin(GPIO_ACCESSORY_EN, S3C_GPIO_OUTPUT); + s3c_gpio_setpull(GPIO_ACCESSORY_EN, S3C_GPIO_PULL_NONE); + gpio_direction_output(GPIO_ACCESSORY_EN, false); + } + + err = gpio_request(GPIO_ACCESSORY_OUT_5V, "gpio_acc_5v"); + if (err) + printk(KERN_DEBUG "%s gpio_request error!\n", __func__); + else { + s3c_gpio_cfgpin(GPIO_ACCESSORY_OUT_5V, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(GPIO_ACCESSORY_OUT_5V, S3C_GPIO_PULL_NONE); + gpio_direction_input(GPIO_ACCESSORY_OUT_5V); + } +} +#endif +#endif + +#ifdef CONFIG_30PIN_CONN +static void smdk_accessory_gpio_init(void) +{ + int err; + err = gpio_request(GPIO_ACCESSORY_INT, "accessory"); + if (err) + printk(KERN_DEBUG "%s gpio_request error!\n", __func__); + else { + s3c_gpio_cfgpin(GPIO_ACCESSORY_INT, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(GPIO_ACCESSORY_INT, S3C_GPIO_PULL_NONE); + gpio_direction_input(GPIO_ACCESSORY_INT); + } + + err = gpio_request(GPIO_DOCK_INT, "dock"); + if (err) + printk(KERN_DEBUG "%s gpio_request error!\n", __func__); + else { + s3c_gpio_cfgpin(GPIO_DOCK_INT, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(GPIO_DOCK_INT, S3C_GPIO_PULL_NONE); + gpio_direction_input(GPIO_DOCK_INT); + } +} + +void smdk_accessory_power(u8 token, bool active) +{ + int gpio_acc_en = 0; + int try_cnt = 0; + int gpio_acc_5v = 0; + static bool enable; + static u8 acc_en_token; + int err; + + /* + token info + 0 : power off, + 1 : Keyboard dock + 2 : USB + */ + gpio_acc_en = GPIO_ACCESSORY_EN; + gpio_acc_5v = GPIO_ACCESSORY_OUT_5V; + + err = gpio_request(gpio_acc_en, "GPIO_ACCESSORY_EN"); + if (err) + printk(KERN_DEBUG "%s gpio_request error!\n", __func__); + else { + s3c_gpio_cfgpin(gpio_acc_en, S3C_GPIO_OUTPUT); + s3c_gpio_setpull(gpio_acc_en, S3C_GPIO_PULL_NONE); + } + + if (active) { + if (acc_en_token) { + pr_info("Board : Keyboard dock is connected.\n"); + gpio_direction_output(gpio_acc_en, 0); + msleep(100); + } + + acc_en_token |= (1 << token); + enable = true; + gpio_direction_output(gpio_acc_en, 1); + usleep_range(2000, 2000); + if (0 != gpio_acc_5v) { + /* prevent the overcurrent */ + while (!gpio_get_value(gpio_acc_5v)) { + gpio_direction_output(gpio_acc_en, 0); + msleep(20); + gpio_direction_output(gpio_acc_en, 1); + if (try_cnt > 10) { + pr_err("[acc] failed to enable the accessory_en"); + break; + } else + try_cnt++; + } + + } else + pr_info("[ACC] gpio_acc_5v is not set\n"); + + } else { + if (0 == token) { + gpio_direction_output(gpio_acc_en, 0); + enable = false; + } else { + acc_en_token &= ~(1 << token); + if (0 == acc_en_token) { + gpio_direction_output(gpio_acc_en, 0); + enable = false; + } + } + } + gpio_free(gpio_acc_en); + pr_info("Board : %s (%d,%d) %s\n", __func__, + token, active, enable ? "on" : "off"); +} + +static int smdk_get_acc_state(void) +{ + return gpio_get_value(GPIO_DOCK_INT); +} + +static int smdk_get_dock_state(void) +{ + return gpio_get_value(GPIO_ACCESSORY_INT); +} + +#ifdef CONFIG_SEC_KEYBOARD_DOCK +static struct sec_keyboard_callbacks *keyboard_callbacks; +static int check_sec_keyboard_dock(bool attached) +{ + if (keyboard_callbacks && keyboard_callbacks->check_keyboard_dock) + return keyboard_callbacks-> + check_keyboard_dock(keyboard_callbacks, attached); + return 0; +} + +/* call 30pin func. from sec_keyboard */ +static struct sec_30pin_callbacks *s30pin_callbacks; +static int noti_sec_univ_kbd_dock(unsigned int code) +{ + if (s30pin_callbacks && s30pin_callbacks->noti_univ_kdb_dock) + return s30pin_callbacks-> + noti_univ_kdb_dock(s30pin_callbacks, code); + return 0; +} + +static void check_uart_path(bool en) +{ + int gpio_uart_sel; +#if (CONFIG_SAMSUNG_ANALOG_UART_SWITCH == 2) + int gpio_uart_sel2; +#endif /* (CONFIG_SAMSUNG_ANALOG_UART_SWITCH == 2) */ + + gpio_uart_sel = GPIO_UART_SEL; +#if (CONFIG_SAMSUNG_ANALOG_UART_SWITCH == 2) + gpio_uart_sel2 = GPIO_UART_SEL2; + + if (en) { + gpio_direction_output(gpio_uart_sel, 1); + gpio_direction_output(gpio_uart_sel2, 1); + printk(KERN_DEBUG "[Keyboard] uart_sel : 1, 1\n"); + } else { + gpio_direction_output(gpio_uart_sel, 1); + gpio_direction_output(gpio_uart_sel2, 0); + printk(KERN_DEBUG "[Keyboard] uart_sel : 0, 0\n"); + } +#else /* (CONFIG_SAMSUNG_ANALOG_UART_SWITCH != 2) */ + if (en) + gpio_direction_output(gpio_uart_sel, 1); + else + gpio_direction_output(gpio_uart_sel, 0); + + printk(KERN_DEBUG "[Keyboard] uart_sel : %d\n", + gpio_get_value(gpio_uart_sel)); +#endif /* (CONFIG_SAMSUNG_ANALOG_UART_SWITCH == 2) */ +} + +static void sec_30pin_register_cb(struct sec_30pin_callbacks *cb) +{ + s30pin_callbacks = cb; +} + +static void sec_keyboard_register_cb(struct sec_keyboard_callbacks *cb) +{ + keyboard_callbacks = cb; +} + +static struct sec_keyboard_platform_data kbd_pdata = { + .accessory_irq_gpio = GPIO_ACCESSORY_INT, + .acc_power = smdk_accessory_power, + .check_uart_path = check_uart_path, + .register_cb = sec_keyboard_register_cb, + .noti_univ_kbd_dock = noti_sec_univ_kbd_dock, + .wakeup_key = NULL, +}; + +static struct platform_device sec_keyboard = { + .name = "sec_keyboard", + .id = -1, + .dev = { + .platform_data = &kbd_pdata, + } +}; +#endif + +#ifdef CONFIG_MOTOR_DRV_DRV2603 +static void drv2603_motor_init(void) +{ + int err; + + err = gpio_request(GPIO_MOTOR_EN, "TSP_LDO_ON"); + if (err) + printk(KERN_DEBUG "%s gpio_request error!\n", __func__); + else { + gpio_direction_output(GPIO_MOTOR_EN, 0); + gpio_export(GPIO_MOTOR_EN, 0); + } +} + +static int drv2603_motor_en(bool en) +{ + return gpio_direction_output(GPIO_MOTOR_EN, en); +} + +static struct drv2603_vibrator_platform_data motor_pdata = { + .gpio_en = drv2603_motor_en, + .max_timeout = 10000, + .pwm_id = 0, + .pwm_duty = 38000, + .pwm_period = 38100, +}; + +static struct platform_device sec_motor = { + .name = "drv2603_vibrator", + .id = -1, + .dev = { + .platform_data = &motor_pdata, + } +}; +#endif + +#ifdef CONFIG_USB_HOST_NOTIFY +#ifndef CONFIG_MFD_MAX77693 +static void px_usb_otg_power(int active) +{ + smdk_accessory_power(2, active); +} + +static void px_usb_otg_en(int active) +{ + pr_info("otg %s : %d\n", __func__, active); + + usb_switch_lock(); + + if (active) { + +#ifdef CONFIG_USB_EHCI_S5P + pm_runtime_get_sync(&s5p_device_ehci.dev); +#endif +#ifdef CONFIG_USB_OHCI_S5P + pm_runtime_get_sync(&s5p_device_ohci.dev); +#endif + usb_switch_set_path(USB_PATH_AP); + px_usb_otg_power(1); + + msleep(500); + + host_notifier_pdata.ndev.mode = NOTIFY_HOST_MODE; + if (host_notifier_pdata.usbhostd_start) + host_notifier_pdata.usbhostd_start(); + } else { + +#ifdef CONFIG_USB_OHCI_S5P + pm_runtime_put_sync(&s5p_device_ohci.dev); +#endif +#ifdef CONFIG_USB_EHCI_S5P + pm_runtime_put_sync(&s5p_device_ehci.dev); +#endif + + usb_switch_clr_path(USB_PATH_AP); + host_notifier_pdata.ndev.mode = NOTIFY_NONE_MODE; + if (host_notifier_pdata.usbhostd_stop) + host_notifier_pdata.usbhostd_stop(); + px_usb_otg_power(0); + } + + usb_switch_unlock(); +} +#endif +#endif + +struct acc_con_platform_data acc_con_pdata = { + .otg_en = px_usb_otg_en, + .acc_power = smdk_accessory_power, + .usb_ldo_en = NULL, + .get_acc_state = smdk_get_acc_state, + .get_dock_state = smdk_get_dock_state, +#ifdef CONFIG_SEC_KEYBOARD_DOCK + .check_keyboard = check_sec_keyboard_dock, +#endif + .register_cb = sec_30pin_register_cb, + .accessory_irq_gpio = GPIO_ACCESSORY_INT, + .dock_irq_gpio = GPIO_DOCK_INT, +#if defined(CONFIG_SAMSUNG_MHL_9290) + .mhl_irq_gpio = GPIO_MHL_INT, + .hdmi_hpd_gpio = GPIO_HDMI_HPD, +#endif +}; +struct platform_device sec_device_connector = { + .name = "acc_con", + .id = -1, + .dev.platform_data = &acc_con_pdata, +}; +#endif + +#ifdef CONFIG_VIDEO_FIMG2D +static struct fimg2d_platdata fimg2d_data __initdata = { + .hw_ver = 0x41, + .parent_clkname = "mout_g2d0", + .clkname = "sclk_fimg2d", + .gate_clkname = "fimg2d", + .clkrate = 199 * 1000000, /* 160 Mhz */ +}; +#endif + +/* BUSFREQ to control memory/bus */ +static struct device_domain busfreq; + +static struct platform_device exynos4_busfreq = { + .id = -1, + .name = "exynos-busfreq", +}; + +#ifdef CONFIG_SEC_WATCHDOG_RESET +static struct platform_device watchdog_reset_device = { + .name = "watchdog-reset", + .id = -1, +}; +#endif + +#ifdef CONFIG_CORESIGHT_ETM +#define CORESIGHT_PHYS_BASE 0x10880000 +#define CORESIGHT_ETB_PHYS_BASE (CORESIGHT_PHYS_BASE + 0x1000) +#define CORESIGHT_TPIU_PHYS_BASE (CORESIGHT_PHYS_BASE + 0x3000) +#define CORESIGHT_FUNNEL_PHYS_BASE (CORESIGHT_PHYS_BASE + 0x4000) +#define CORESIGHT_ETM_PHYS_BASE (CORESIGHT_PHYS_BASE + 0x1C000) + +static struct resource coresight_etb_resources[] = { + { + .start = CORESIGHT_ETB_PHYS_BASE, + .end = CORESIGHT_ETB_PHYS_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device coresight_etb_device = { + .name = "coresight_etb", + .id = -1, + .num_resources = ARRAY_SIZE(coresight_etb_resources), + .resource = coresight_etb_resources, +}; + +static struct resource coresight_tpiu_resources[] = { + { + .start = CORESIGHT_TPIU_PHYS_BASE, + .end = CORESIGHT_TPIU_PHYS_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device coresight_tpiu_device = { + .name = "coresight_tpiu", + .id = -1, + .num_resources = ARRAY_SIZE(coresight_tpiu_resources), + .resource = coresight_tpiu_resources, +}; + +static struct resource coresight_funnel_resources[] = { + { + .start = CORESIGHT_FUNNEL_PHYS_BASE, + .end = CORESIGHT_FUNNEL_PHYS_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device coresight_funnel_device = { + .name = "coresight_funnel", + .id = -1, + .num_resources = ARRAY_SIZE(coresight_funnel_resources), + .resource = coresight_funnel_resources, +}; + +static struct resource coresight_etm_resources[] = { + { + .start = CORESIGHT_ETM_PHYS_BASE, + .end = CORESIGHT_ETM_PHYS_BASE + (SZ_4K * 4) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device coresight_etm_device = { + .name = "coresight_etm", + .id = -1, + .num_resources = ARRAY_SIZE(coresight_etm_resources), + .resource = coresight_etm_resources, +}; +#endif + +static struct platform_device *midas_devices[] __initdata = { +#ifdef CONFIG_SEC_WATCHDOG_RESET + &watchdog_reset_device, +#endif +#ifdef CONFIG_ANDROID_RAM_CONSOLE + &ram_console_device, +#endif + /* Samsung Power Domain */ + &exynos4_device_pd[PD_MFC], + &exynos4_device_pd[PD_G3D], + &exynos4_device_pd[PD_LCD0], + &exynos4_device_pd[PD_CAM], + &exynos4_device_pd[PD_TV], + &exynos4_device_pd[PD_GPS], +#ifdef CONFIG_VIDEO_EXYNOS_FIMC_IS + &exynos4_device_pd[PD_ISP], +#endif + &exynos4_device_pd[PD_GPS_ALIVE], + /* legacy fimd */ +#ifdef CONFIG_FB_S5P + &s3c_device_fb, +#endif + +#ifdef CONFIG_FB_S5P_MDNIE + &mdnie_device, +#endif + +#ifdef CONFIG_HAVE_PWM + &s3c_device_timer[0], + &s3c_device_timer[1], + &s3c_device_timer[2], + &s3c_device_timer[3], +#endif + +#ifdef CONFIG_SND_SOC_WM8994 + &vbatt_device, +#endif + + &s3c_device_wdt, + &s3c_device_rtc, + + &s3c_device_i2c0, + +#ifdef CONFIG_S3C_DEV_I2C3 + &s3c_device_i2c3, +#endif +#ifdef CONFIG_S3C_DEV_I2C4 + &s3c_device_i2c4, +#endif + /* &s3c_device_i2c5, */ +#ifdef CONFIG_S3C_DEV_I2C6 + &s3c_device_i2c6, +#endif + &s3c_device_i2c7, +#ifdef CONFIG_S3C_DEV_I2C8 + &s3c_device_i2c8, +#endif + /* &s3c_device_i2c9, */ +#if defined (CONFIG_BATTERY_MAX17047_FUELGAUGE) || defined(CONFIG_BATTERY_MAX17047_C_FUELGAUGE) + &s3c_device_i2c14, /* max17047-fuelgauge */ +#endif +#ifdef CONFIG_SAMSUNG_MHL + &s3c_device_i2c15, +#endif +#if defined(CONFIG_MFD_MAX77693) + &s3c_device_i2c17, +#endif +#ifdef CONFIG_IR_REMOCON_MC96 + &s3c_device_i2c22, +#endif + +#if 0 +#ifdef CONFIG_FB_S5P_NT71391 + &s3c_device_i2c23, +#endif +#endif + +#ifdef CONFIG_BACKLIGHT_LP855X + &s3c_device_i2c24, +#endif + +#if defined CONFIG_USB_EHCI_S5P && !defined CONFIG_LINK_DEVICE_HSIC + &s5p_device_ehci, +#endif +#if defined CONFIG_USB_OHCI_S5P && !defined CONFIG_LINK_DEVICE_HSIC + &s5p_device_ohci, +#endif +#ifdef CONFIG_USB_GADGET + &s3c_device_usbgadget, +#endif +#ifdef CONFIG_USB_ANDROID_RNDIS + &s3c_device_rndis, +#endif +#if defined(CONFIG_USB_ANDROID) || defined(CONFIG_USB_G_ANDROID) + &s3c_device_android_usb, + &s3c_device_usb_mass_storage, +#endif +#ifdef CONFIG_EXYNOS4_DEV_MSHC + &s3c_device_mshci, +#endif +#ifdef CONFIG_S3C_DEV_HSMMC + &s3c_device_hsmmc0, +#endif +#ifdef CONFIG_S3C_DEV_HSMMC1 + &s3c_device_hsmmc1, +#endif +#ifdef CONFIG_S3C_DEV_HSMMC2 + &s3c_device_hsmmc2, +#endif +#ifdef CONFIG_S3C_DEV_HSMMC3 + &s3c_device_hsmmc3, +#endif + +#ifdef CONFIG_SND_SAMSUNG_AC97 + &exynos_device_ac97, +#endif +#ifdef CONFIG_SND_SAMSUNG_I2S + &exynos_device_i2s0, +#endif +#ifdef CONFIG_SND_SAMSUNG_PCM + &exynos_device_pcm0, +#endif +#ifdef CONFIG_SND_SAMSUNG_SPDIF + &exynos_device_spdif, +#endif +#if defined(CONFIG_SND_SAMSUNG_RP) || defined(CONFIG_SND_SAMSUNG_ALP) + &exynos_device_srp, +#endif +#ifdef CONFIG_VIDEO_EXYNOS_FIMC_IS + &exynos4_device_fimc_is, +#endif +#ifdef CONFIG_VIDEO_TVOUT + &s5p_device_tvout, + &s5p_device_cec, + &s5p_device_hpd, +#endif +#ifdef CONFIG_FB_S5P_EXTDSP + &s3c_device_extdsp, +#endif +#ifdef CONFIG_VIDEO_FIMC + &s3c_device_fimc0, + &s3c_device_fimc1, + &s3c_device_fimc2, + &s3c_device_fimc3, +/* CONFIG_VIDEO_SAMSUNG_S5P_FIMC is the feature for mainline */ +#elif defined(CONFIG_VIDEO_SAMSUNG_S5P_FIMC) + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, + &s5p_device_fimc3, +#endif +#if defined(CONFIG_VIDEO_FIMC_MIPI) + &s3c_device_csis0, + &s3c_device_csis1, +#endif +#if defined(CONFIG_VIDEO_MFC5X) || defined(CONFIG_VIDEO_SAMSUNG_S5P_MFC) + &s5p_device_mfc, +#endif +#ifdef CONFIG_S5P_SYSTEM_MMU + &SYSMMU_PLATDEV(g2d_acp), + &SYSMMU_PLATDEV(fimc0), + &SYSMMU_PLATDEV(fimc1), + &SYSMMU_PLATDEV(fimc2), + &SYSMMU_PLATDEV(fimc3), + &SYSMMU_PLATDEV(jpeg), + &SYSMMU_PLATDEV(mfc_l), + &SYSMMU_PLATDEV(mfc_r), + &SYSMMU_PLATDEV(tv), +#ifdef CONFIG_VIDEO_EXYNOS_FIMC_IS + &SYSMMU_PLATDEV(is_isp), + &SYSMMU_PLATDEV(is_drc), + &SYSMMU_PLATDEV(is_fd), + &SYSMMU_PLATDEV(is_cpu), +#endif +#endif +#ifdef CONFIG_ION_EXYNOS + &exynos_device_ion, +#endif +#ifdef CONFIG_VIDEO_EXYNOS_FIMC_LITE + &exynos_device_flite0, + &exynos_device_flite1, +#endif +#ifdef CONFIG_VIDEO_FIMG2D + &s5p_device_fimg2d, +#endif + +#ifdef CONFIG_VIDEO_JPEG_V2X + &s5p_device_jpeg, +#endif + &samsung_asoc_dma, +#ifndef CONFIG_SND_SOC_SAMSUNG_USE_DMA_WRAPPER + &samsung_asoc_idma, +#endif +#ifdef CONFIG_BT_BCM4334 + &bcm4334_bluetooth_device, +#endif +#ifdef CONFIG_S5P_DEV_ACE + &s5p_device_ace, +#endif + &exynos4_busfreq, +#ifdef CONFIG_USB_HOST_NOTIFY + &host_notifier_device, +#endif +#ifdef CONFIG_EXYNOS4_SETUP_THERMAL + &s5p_device_tmu, +#endif +#ifdef CONFIG_30PIN_CONN + &sec_device_connector, +#ifdef CONFIG_SEC_KEYBOARD_DOCK + &sec_keyboard, +#endif +#ifdef CONFIG_MOTOR_DRV_DRV2603 + &sec_motor, +#endif +#endif +#ifdef CONFIG_CORESIGHT_ETM + &coresight_etb_device, + &coresight_tpiu_device, + &coresight_funnel_device, + &coresight_etm_device, +#endif +}; + +#ifdef CONFIG_EXYNOS4_SETUP_THERMAL +/* below temperature base on the celcius degree */ +struct s5p_platform_tmu midas_tmu_data __initdata = { + .ts = { + .stop_1st_throttle = 90, + .start_1st_throttle = 100, + .stop_2nd_throttle = 103, + .start_2nd_throttle = 105, + .start_tripping = 110, /* temp to do tripping */ + .start_emergency = 120, /* To protect chip,forcely kernel panic */ + .stop_mem_throttle = 80, + .start_mem_throttle = 85, + .stop_tc = 13, + .start_tc = 10, + }, + .cpufreq = { + .limit_1st_throttle = 800000, /* 800MHz in KHz order */ + .limit_2nd_throttle = 200000, /* 200MHz in KHz order */ + }, + .temp_compensate = { + .arm_volt = 925000, /* vdd_arm in uV for temp compensation */ + .bus_volt = 900000, /* vdd_bus in uV for temp compensation */ + .g3d_volt = 900000, /* vdd_g3d in uV for temp compensation */ + }, +}; +#endif + +#if defined CONFIG_USB_OHCI_S5P && defined CONFIG_LINK_DEVICE_HSIC +static int __init s5p_ohci_device_initcall(void) +{ + return platform_device_register(&s5p_device_ohci); +} +late_initcall(s5p_ohci_device_initcall); +#endif +#if defined CONFIG_USB_EHCI_S5P && defined CONFIG_LINK_DEVICE_HSIC +static int __init s5p_ehci_device_initcall(void) +{ + return platform_device_register(&s5p_device_ehci); +} +late_initcall(s5p_ehci_device_initcall); +#endif + +#if defined(CONFIG_VIDEO_TVOUT) +static struct s5p_platform_hpd hdmi_hpd_data __initdata = { + +}; +static struct s5p_platform_cec hdmi_cec_data __initdata = { + +}; +#endif + +#if defined(CONFIG_CMA) +static void __init exynos4_reserve_mem(void) +{ + static struct cma_region regions[] = { +#ifdef CONFIG_VIDEO_EXYNOS_FIMC_IS + { + .name = "fimc_is", + .size = CONFIG_VIDEO_EXYNOS_MEMSIZE_FIMC_IS * SZ_1K, + { + .alignment = 1 << 26, + }, + .start = 0 + }, +#endif +#ifdef CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMD + { + .name = "fimd", + .size = CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMD * SZ_1K, + { + .alignment = 1 << 20, + }, + .start = 0 + }, +#endif +#ifdef CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC0 + { + .name = "fimc0", + .size = CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC0 * SZ_1K, + .start = 0 + }, +#endif +#if !defined(CONFIG_EXYNOS_CONTENT_PATH_PROTECTION) && \ + defined(CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC0) + { + .name = "mfc0", + .size = CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC0 * SZ_1K, + { + .alignment = 1 << 17, + }, + .start = 0, + }, +#endif +#if !defined(CONFIG_EXYNOS_CONTENT_PATH_PROTECTION) && \ + defined(CONFIG_ION_EXYNOS_CONTIGHEAP_SIZE) + { + .name = "ion", + .size = CONFIG_ION_EXYNOS_CONTIGHEAP_SIZE * SZ_1K, + }, +#endif +#ifdef CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC + { + .name = "mfc", + .size = CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC * SZ_1K, + { + .alignment = 1 << 17, + }, + .start = 0 + }, +#endif +#if !defined(CONFIG_EXYNOS_CONTENT_PATH_PROTECTION) && \ + defined(CONFIG_VIDEO_SAMSUNG_S5P_MFC) + { + .name = "b2", + .size = 32 << 20, + { .alignment = 128 << 10 }, + }, + { + .name = "b1", + .size = 32 << 20, + { .alignment = 128 << 10 }, + }, + { + .name = "fw", + .size = 1 << 20, + { .alignment = 128 << 10 }, + }, +#endif +#if (CONFIG_VIDEO_SAMSUNG_MEMSIZE_JPEG > 0) + { + .name = "jpeg", + .size = CONFIG_VIDEO_SAMSUNG_MEMSIZE_JPEG * SZ_1K, + .start = 0 + }, +#endif +#ifdef CONFIG_AUDIO_SAMSUNG_MEMSIZE_SRP + { + .name = "srp", + .size = CONFIG_AUDIO_SAMSUNG_MEMSIZE_SRP * SZ_1K, + .start = 0, + }, +#endif +#ifdef CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMG2D + { + .name = "fimg2d", + .size = CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMG2D * SZ_1K, + .start = 0 + }, +#endif +#ifdef CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC1 + { + .name = "fimc1", + .size = CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC1 * SZ_1K, + .start = 0x65c00000, + }, +#endif +#ifdef CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC1 + { + .name = "mfc1", + .size = CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC1 * SZ_1K, + { + .alignment = 1 << 26, + }, + .start = 0x64000000, + }, +#endif +#ifdef CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC_NORMAL + { + .name = "mfc-normal", + .size = CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC_NORMAL * SZ_1K, + .start = 0x64000000, + }, +#endif + { + .size = 0 + }, + }; +#ifdef CONFIG_EXYNOS_CONTENT_PATH_PROTECTION + static struct cma_region regions_secure[] = { +#ifdef CONFIG_ION_EXYNOS_CONTIGHEAP_SIZE + { + .name = "ion", + .size = CONFIG_ION_EXYNOS_CONTIGHEAP_SIZE * SZ_1K, + }, +#endif +#ifdef CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC_SECURE + { + .name = "mfc-secure", + .size = CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC_SECURE * SZ_1K, + }, +#endif + { + .name = "sectbl", + .size = SZ_1M, + }, + { + .size = 0 + }, + }; +#else /* !CONFIG_EXYNOS_CONTENT_PATH_PROTECTION */ + struct cma_region *regions_secure = NULL; +#endif + + static const char map[] __initconst = + "s3cfb.0=fimd;exynos4-fb.0=fimd;" + "s3c-fimc.0=fimc0;s3c-fimc.1=fimc1;s3c-fimc.2=fimc2;s3c-fimc.3=fimc3;" + "exynos4210-fimc.0=fimc0;exynos4210-fimc.1=fimc1;exynos4210-fimc.2=fimc2;exynos4210-fimc.3=fimc3;" +#ifdef CONFIG_ION_EXYNOS + "ion-exynos=ion;" +#endif +#ifdef CONFIG_VIDEO_MFC5X + "s3c-mfc/A=mfc0,mfc-secure;" + "s3c-mfc/B=mfc1,mfc-normal;" + "s3c-mfc/AB=mfc;" +#endif +#ifdef CONFIG_VIDEO_SAMSUNG_S5P_MFC + "s5p-mfc/f=fw;" + "s5p-mfc/a=b1;" + "s5p-mfc/b=b2;" +#endif + "samsung-rp=srp;" +#if (CONFIG_VIDEO_SAMSUNG_MEMSIZE_JPEG > 0) + "s5p-jpeg=jpeg;" +#endif +#ifdef CONFIG_VIDEO_EXYNOS_FIMC_IS + "exynos4-fimc-is=fimc_is;" +#endif + "s5p-fimg2d=fimg2d;" +#ifdef CONFIG_EXYNOS_CONTENT_PATH_PROTECTION + "s5p-smem/sectbl=sectbl;" +#endif + "s5p-smem/mfc=mfc-secure;" + "s5p-smem/fimc=ion;" + "s5p-smem/mfc-shm=mfc-normal;" + "s5p-smem/fimd=fimd;" + "s5p-smem/fimc0=fimc0;"; + + s5p_cma_region_reserve(regions, regions_secure, 0, map); +} +#else +static inline void exynos4_reserve_mem(void) +{ +} +#endif + +#ifdef CONFIG_BACKLIGHT_PWM +/* LCD Backlight data */ +static struct samsung_bl_gpio_info smdk4212_bl_gpio_info = { + .no = GPIO_LED_BACKLIGHT_PWM, + .func = S3C_GPIO_SFN(2), +}; + +static struct platform_pwm_backlight_data smdk4212_bl_data = { + .pwm_id = 1, +}; +#endif + +static void __init midas_map_io(void) +{ + clk_xusbxti.rate = 24000000; + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(smdk4212_uartcfgs, ARRAY_SIZE(smdk4212_uartcfgs)); + +#if defined(CONFIG_S5P_MEM_CMA) + exynos4_reserve_mem(); +#endif + + /* as soon as INFORM6 is visible, sec_debug is ready to run */ + sec_debug_init(); +} + +static void __init exynos_sysmmu_init(void) +{ + ASSIGN_SYSMMU_POWERDOMAIN(fimc0, &exynos4_device_pd[PD_CAM].dev); + ASSIGN_SYSMMU_POWERDOMAIN(fimc1, &exynos4_device_pd[PD_CAM].dev); + ASSIGN_SYSMMU_POWERDOMAIN(fimc2, &exynos4_device_pd[PD_CAM].dev); + ASSIGN_SYSMMU_POWERDOMAIN(fimc3, &exynos4_device_pd[PD_CAM].dev); + ASSIGN_SYSMMU_POWERDOMAIN(jpeg, &exynos4_device_pd[PD_CAM].dev); + +#if defined(CONFIG_VIDEO_SAMSUNG_S5P_MFC) || defined(CONFIG_VIDEO_MFC5X) + ASSIGN_SYSMMU_POWERDOMAIN(mfc_l, &exynos4_device_pd[PD_MFC].dev); + ASSIGN_SYSMMU_POWERDOMAIN(mfc_r, &exynos4_device_pd[PD_MFC].dev); +#endif + ASSIGN_SYSMMU_POWERDOMAIN(tv, &exynos4_device_pd[PD_TV].dev); +#ifdef CONFIG_VIDEO_FIMG2D + sysmmu_set_owner(&SYSMMU_PLATDEV(g2d_acp).dev, &s5p_device_fimg2d.dev); +#endif +#ifdef CONFIG_VIDEO_MFC5X + sysmmu_set_owner(&SYSMMU_PLATDEV(mfc_l).dev, &s5p_device_mfc.dev); + sysmmu_set_owner(&SYSMMU_PLATDEV(mfc_r).dev, &s5p_device_mfc.dev); +#endif +#ifdef CONFIG_VIDEO_FIMC + sysmmu_set_owner(&SYSMMU_PLATDEV(fimc0).dev, &s3c_device_fimc0.dev); + sysmmu_set_owner(&SYSMMU_PLATDEV(fimc1).dev, &s3c_device_fimc1.dev); + sysmmu_set_owner(&SYSMMU_PLATDEV(fimc2).dev, &s3c_device_fimc2.dev); + sysmmu_set_owner(&SYSMMU_PLATDEV(fimc3).dev, &s3c_device_fimc3.dev); +#endif +#ifdef CONFIG_VIDEO_TVOUT + sysmmu_set_owner(&SYSMMU_PLATDEV(tv).dev, &s5p_device_tvout.dev); +#endif +#ifdef CONFIG_VIDEO_JPEG_V2X + sysmmu_set_owner(&SYSMMU_PLATDEV(jpeg).dev, &s5p_device_jpeg.dev); +#endif +#ifdef CONFIG_VIDEO_EXYNOS_FIMC_IS + ASSIGN_SYSMMU_POWERDOMAIN(is_isp, &exynos4_device_pd[PD_ISP].dev); + ASSIGN_SYSMMU_POWERDOMAIN(is_drc, &exynos4_device_pd[PD_ISP].dev); + ASSIGN_SYSMMU_POWERDOMAIN(is_fd, &exynos4_device_pd[PD_ISP].dev); + ASSIGN_SYSMMU_POWERDOMAIN(is_cpu, &exynos4_device_pd[PD_ISP].dev); + + sysmmu_set_owner(&SYSMMU_PLATDEV(is_isp).dev, + &exynos4_device_fimc_is.dev); + sysmmu_set_owner(&SYSMMU_PLATDEV(is_drc).dev, + &exynos4_device_fimc_is.dev); + sysmmu_set_owner(&SYSMMU_PLATDEV(is_fd).dev, + &exynos4_device_fimc_is.dev); + sysmmu_set_owner(&SYSMMU_PLATDEV(is_cpu).dev, + &exynos4_device_fimc_is.dev); +#endif +} + +#ifdef CONFIG_FB_S5P_EXTDSP +struct platform_device s3c_device_extdsp = { + .name = "s3cfb_extdsp", + .id = 0, +}; + +static struct s3cfb_extdsp_lcd dummy_buffer = { + .width = 1920, + .height = 1080, + .bpp = 16, +}; + +static struct s3c_platform_fb default_extdsp_data __initdata = { + .hw_ver = 0x70, + .nr_wins = 1, + .default_win = 0, + .swap = FB_SWAP_WORD | FB_SWAP_HWORD, + .lcd = &dummy_buffer +}; + +void __init s3cfb_extdsp_set_platdata(struct s3c_platform_fb *pd) +{ + struct s3c_platform_fb *npd; + int i; + + if (!pd) + pd = &default_extdsp_data; + + npd = kmemdup(pd, sizeof(struct s3c_platform_fb), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + else { + for (i = 0; i < npd->nr_wins; i++) + npd->nr_buffers[i] = 1; + s3c_device_extdsp.dev.platform_data = npd; + } +} +#endif + +static void __init midas_machine_init(void) +{ + struct clk *ppmu_clk = NULL; + /* + * prevent 4x12 ISP power off problem + * ISP_SYS Register has to be 0 before ISP block power off. + */ + __raw_writel(0x0, S5P_CMU_RESET_ISP_SYS); + + /* initialise the gpios */ + midas_config_gpio_table(); + exynos4_sleep_gpio_table_set = midas_config_sleep_gpio_table; + + midas_power_init(); + + s3c_i2c0_set_platdata(NULL); + i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); + + kona_tsp_init(system_rev); + kona_key_init(); + +#ifdef CONFIG_MOTOR_DRV_DRV2603 + drv2603_motor_init(); +#endif + + midas_sound_init(); + +#ifdef CONFIG_S3C_DEV_I2C5 + s3c_i2c5_set_platdata(&default_i2c5_data); + i2c_register_board_info(5, i2c_devs5, + ARRAY_SIZE(i2c_devs5)); +#endif + +#ifdef CONFIG_S3C_DEV_I2C6 + s3c_i2c6_set_platdata(NULL); +#endif +#if defined(CONFIG_INPUT_WACOM) + midas_wacom_init(); +#endif + + s3c_i2c7_set_platdata(NULL); + i2c_register_board_info(7, i2c_devs7, ARRAY_SIZE(i2c_devs7)); + i2c_register_board_info(9, i2c_devs9_emul, ARRAY_SIZE(i2c_devs9_emul)); + i2c_register_board_info(11, i2c_devs11_emul, + ARRAY_SIZE(i2c_devs11_emul)); + +#if defined(CONFIG_BATTERY_SAMSUNG_P1X) + exynos_kona_charger_init(); +#endif +#if defined (CONFIG_BATTERY_MAX17047_FUELGAUGE) || defined(CONFIG_BATTERY_MAX17047_C_FUELGAUGE) + printk(KERN_INFO "%s() register fuelgauge driver\n", __func__); + i2c_register_board_info(14, i2c_devs14_emul, + ARRAY_SIZE(i2c_devs14_emul)); +#endif +#ifdef CONFIG_SAMSUNG_MHL + printk(KERN_INFO "%s() register sii9234 driver\n", __func__); + + i2c_register_board_info(15, i2c_devs15_emul, + ARRAY_SIZE(i2c_devs15_emul)); +#endif +#if defined(CONFIG_MFD_MAX77693) + i2c_register_board_info(17, i2c_devs17_emul, + ARRAY_SIZE(i2c_devs17_emul)); +#endif +#if defined(CONFIG_STMPE811_ADC) + i2c_register_board_info(19, i2c_devs19_emul, + ARRAY_SIZE(i2c_devs19_emul)); +#endif +#ifdef CONFIG_IR_REMOCON_MC96 + i2c_register_board_info(22, i2c_devs22_emul, + ARRAY_SIZE(i2c_devs22_emul)); +#endif +#if defined(GPIO_OLED_DET) + gpio_request(GPIO_OLED_DET, "OLED_DET"); + s5p_register_gpio_interrupt(GPIO_OLED_DET); + gpio_free(GPIO_OLED_DET); +#endif +#ifdef CONFIG_FB_S5P +#if defined(CONFIG_FB_S5P_MIPI_DSIM) + mipi_fb_init(); +#elif defined(CONFIG_BACKLIGHT_PWM) + samsung_bl_set(&smdk4212_bl_gpio_info, &smdk4212_bl_data); +#endif + s3cfb_set_platdata(&fb_platform_data); +#ifdef CONFIG_EXYNOS_DEV_PD + s3c_device_fb.dev.parent = &exynos4_device_pd[PD_LCD0].dev; +#endif +#endif +#ifdef CONFIG_USB_EHCI_S5P + smdk4212_ehci_init(); +#endif +#ifdef CONFIG_USB_OHCI_S5P + smdk4212_ohci_init(); +#endif +#ifdef CONFIG_USB_GADGET + smdk4212_usbgadget_init(); +#endif + +#ifdef CONFIG_VIDEO_EXYNOS_FIMC_IS + exynos4_fimc_is_set_platdata(NULL); +#ifdef CONFIG_EXYNOS_DEV_PD + exynos4_device_fimc_is.dev.parent = &exynos4_device_pd[PD_ISP].dev; +#endif +#endif +#ifdef CONFIG_EXYNOS4_DEV_MSHC + s3c_mshci_set_platdata(&exynos4_mshc_pdata); +#endif +#ifdef CONFIG_S3C_DEV_HSMMC + s3c_sdhci0_set_platdata(&smdk4212_hsmmc0_pdata); +#endif +#ifdef CONFIG_S3C_DEV_HSMMC1 + s3c_sdhci1_set_platdata(&smdk4212_hsmmc1_pdata); +#endif +#ifdef CONFIG_S3C_DEV_HSMMC2 + s3c_sdhci2_set_platdata(&smdk4212_hsmmc2_pdata); +#endif +#ifdef CONFIG_S3C_DEV_HSMMC3 + s3c_sdhci3_set_platdata(&smdk4212_hsmmc3_pdata); +#endif + + midas_camera_init(); + +#ifdef CONFIG_FB_S5P_EXTDSP + s3cfb_extdsp_set_platdata(&default_extdsp_data); +#endif + +#if defined(CONFIG_VIDEO_TVOUT) + s5p_hdmi_hpd_set_platdata(&hdmi_hpd_data); + s5p_hdmi_cec_set_platdata(&hdmi_cec_data); +#ifdef CONFIG_EXYNOS_DEV_PD + s5p_device_tvout.dev.parent = &exynos4_device_pd[PD_TV].dev; + exynos4_device_pd[PD_TV].dev.parent = &exynos4_device_pd[PD_LCD0].dev; +#endif +#endif + +#ifdef CONFIG_MACH_KONA_SENSOR + kona_sensor_init(); +#endif + +#ifdef CONFIG_VIDEO_JPEG_V2X +#ifdef CONFIG_EXYNOS_DEV_PD + s5p_device_jpeg.dev.parent = &exynos4_device_pd[PD_CAM].dev; + exynos4_jpeg_setup_clock(&s5p_device_jpeg.dev, 160000000); +#endif +#endif + +#ifdef CONFIG_ION_EXYNOS + exynos_ion_set_platdata(); +#endif + +#if defined(CONFIG_VIDEO_MFC5X) || defined(CONFIG_VIDEO_SAMSUNG_S5P_MFC) +#ifdef CONFIG_EXYNOS_DEV_PD + s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev; +#endif + exynos4_mfc_setup_clock(&s5p_device_mfc.dev, 200 * MHZ); +#endif + +#if defined(CONFIG_VIDEO_SAMSUNG_S5P_MFC) + dev_set_name(&s5p_device_mfc.dev, "s3c-mfc"); + clk_add_alias("mfc", "s5p-mfc", "mfc", &s5p_device_mfc.dev); + s5p_mfc_setname(&s5p_device_mfc, "s5p-mfc"); +#endif +#ifdef CONFIG_VIDEO_FIMG2D + s5p_fimg2d_set_platdata(&fimg2d_data); +#endif + + brcm_wlan_init(); + +#ifdef CONFIG_EXYNOS4_SETUP_THERMAL + s5p_tmu_set_platdata(&midas_tmu_data); +#endif + + exynos_sysmmu_init(); + + platform_add_devices(midas_devices, ARRAY_SIZE(midas_devices)); + +#ifdef CONFIG_S3C_ADC + platform_device_register(&s3c_device_adc); +#endif +#if defined(CONFIG_STMPE811_ADC) + platform_device_register(&s3c_device_i2c19); +#endif +#if defined(CONFIG_BATTERY_SAMSUNG) + platform_device_register(&samsung_device_battery); +#endif +#ifdef CONFIG_SEC_THERMISTOR + platform_device_register(&sec_device_thermistor); +#endif +#if defined(CONFIG_S3C_DEV_I2C5) + platform_device_register(&s3c_device_i2c5); +#endif +#ifdef CONFIG_30PIN_CONN + smdk_accessory_gpio_init(); +#endif +#ifdef CONFIG_USB_HOST_NOTIFY +#ifndef CONFIG_MFD_MAX77693 + acc_chk_gpio_init(); +#endif +#endif + +#ifdef CONFIG_BUSFREQ_OPP + dev_add(&busfreq, &exynos4_busfreq.dev); + + /* PPMUs using for cpufreq get clk from clk_list */ + ppmu_clk = clk_get(NULL, "ppmudmc0"); + if (IS_ERR(ppmu_clk)) + printk(KERN_ERR "failed to get ppmu_dmc0\n"); + clk_enable(ppmu_clk); + clk_put(ppmu_clk); + + ppmu_clk = clk_get(NULL, "ppmudmc1"); + if (IS_ERR(ppmu_clk)) + printk(KERN_ERR "failed to get ppmu_dmc1\n"); + clk_enable(ppmu_clk); + clk_put(ppmu_clk); + + ppmu_clk = clk_get(NULL, "ppmucpu"); + if (IS_ERR(ppmu_clk)) + printk(KERN_ERR "failed to get ppmu_cpu\n"); + clk_enable(ppmu_clk); + clk_put(ppmu_clk); + + ppmu_init(&exynos_ppmu[PPMU_DMC0], &exynos4_busfreq.dev); + ppmu_init(&exynos_ppmu[PPMU_DMC1], &exynos4_busfreq.dev); + ppmu_init(&exynos_ppmu[PPMU_CPU], &exynos4_busfreq.dev); +#endif + + /* 400 kHz for initialization of MMC Card */ + __raw_writel((__raw_readl(EXYNOS4_CLKDIV_FSYS3) & 0xfffffff0) + | 0x9, EXYNOS4_CLKDIV_FSYS3); + /* kona sdhc2,3 clock 44Mhz */ + __raw_writel((__raw_readl(EXYNOS4_CLKDIV_FSYS2) & 0xfff0fff0) + | 0x90009, EXYNOS4_CLKDIV_FSYS2); + __raw_writel((__raw_readl(EXYNOS4_CLKDIV_FSYS1) & 0xfff0fff0) + | 0x80008, EXYNOS4_CLKDIV_FSYS1); + +/* IR_LED */ +#if defined(CONFIG_IR_REMOCON_MC96) + irda_device_init(); +#endif +/* IR_LED */ +} + +static void __init exynos_init_reserve(void) +{ + sec_debug_magic_init(); +} + +MACHINE_START(SMDK4412, "SMDK4x12") + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = exynos4_init_irq, + .map_io = midas_map_io, + .init_machine = midas_machine_init, + .timer = &exynos4_timer, + .init_early = &exynos_init_reserve, +MACHINE_END |