diff options
Diffstat (limited to 'arch/arm/mach-imx')
58 files changed, 693 insertions, 611 deletions
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 59c97a3..0e6f1af 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,18 +1,30 @@ config IMX_HAVE_DMA_V1 bool -# -# ARCH_MX31 and ARCH_MX35 are left for compatibility -# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2. -# To easily distinguish good and reviewed from unreviewed usages new (and IMHO -# more sensible) names are used: SOC_IMX31 and SOC_IMX35 -config ARCH_MX31 + +config HAVE_IMX_GPC + bool + +config HAVE_IMX_MMDC + bool + +config HAVE_IMX_SRC + bool + +config ARCH_MX1 + bool + +config MACH_MX21 + bool + +config ARCH_MX25 bool -config ARCH_MX35 +config MACH_MX27 bool config SOC_IMX1 bool + select ARCH_MX1 select CPU_ARM920T select IMX_HAVE_DMA_V1 select IMX_HAVE_IOMUX_V1 @@ -20,6 +32,7 @@ config SOC_IMX1 config SOC_IMX21 bool + select MACH_MX21 select CPU_ARM926T select ARCH_MXC_AUDMUX_V1 select IMX_HAVE_DMA_V1 @@ -28,6 +41,7 @@ config SOC_IMX21 config SOC_IMX25 bool + select ARCH_MX25 select CPU_ARM926T select ARCH_MXC_AUDMUX_V2 select ARCH_MXC_IOMUX_V3 @@ -35,6 +49,7 @@ config SOC_IMX25 config SOC_IMX27 bool + select MACH_MX27 select CPU_ARM926T select ARCH_MXC_AUDMUX_V1 select IMX_HAVE_DMA_V1 @@ -46,8 +61,8 @@ config SOC_IMX31 select CPU_V6 select IMX_HAVE_PLATFORM_MXC_RNGA select ARCH_MXC_AUDMUX_V2 - select ARCH_MX31 select MXC_AVIC + select SMP_ON_UP if SMP config SOC_IMX35 bool @@ -55,11 +70,11 @@ config SOC_IMX35 select ARCH_MXC_IOMUX_V3 select ARCH_MXC_AUDMUX_V2 select HAVE_EPIT - select ARCH_MX35 select MXC_AVIC + select SMP_ON_UP if SMP -if ARCH_MX1 +if ARCH_IMX_V4_V5 comment "MX1 platforms:" config MACH_MXLADS @@ -87,30 +102,6 @@ config MACH_APF9328 help Say Yes here if you are using the Armadeus APF9328 development board -endif - -if ARCH_MX2 - -choice - prompt "CPUs:" - default MACH_MX21 - -config MACH_MX21 - bool "i.MX21 support" - help - This enables support for Freescale's MX2 based i.MX21 processor. - -config MACH_MX27 - bool "i.MX27 support" - help - This enables support for Freescale's MX2 based i.MX27 processor. - -endchoice - -endif - -if MACH_MX21 - comment "MX21 platforms:" config MACH_MX21ADS @@ -124,15 +115,12 @@ config MACH_MX21ADS Include support for MX21ADS platform. This includes specific configurations for the board and its peripherals. -endif - -if ARCH_MX25 - comment "MX25 platforms:" config MACH_MX25_3DS bool "Support MX25PDK (3DS) Platform" select SOC_IMX25 + select IMX_HAVE_PLATFORM_FLEXCAN select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMXDI_RTC @@ -144,7 +132,7 @@ config MACH_MX25_3DS select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX -config MACH_EUKREA_CPUIMX25 +config MACH_EUKREA_CPUIMX25SD bool "Support Eukrea CPUIMX25 Platform" select SOC_IMX25 select IMX_HAVE_PLATFORM_FLEXCAN @@ -160,23 +148,20 @@ config MACH_EUKREA_CPUIMX25 choice prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX25 + depends on MACH_EUKREA_CPUIMX25SD default MACH_EUKREA_MBIMXSD25_BASEBOARD config MACH_EUKREA_MBIMXSD25_BASEBOARD bool "Eukrea MBIMXSD development board" select IMX_HAVE_PLATFORM_GPIO_KEYS select IMX_HAVE_PLATFORM_IMX_SSI + select LEDS_GPIO_REGISTER help This adds board specific devices that can be found on Eukrea's MBIMXSD evaluation board. endchoice -endif - -if MACH_MX27 - comment "MX27 platforms:" config MACH_MX27ADS @@ -265,6 +250,7 @@ config MACH_EUKREA_MBIMX27_BASEBOARD select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX + select LEDS_GPIO_REGISTER help This adds board specific devices that can be found on Eukrea's MBIMX27 evaluation board. @@ -276,6 +262,7 @@ config MACH_MX27_3DS select SOC_IMX27 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART @@ -353,7 +340,7 @@ config MACH_IMX27IPCAM endif -if ARCH_MX3 +if ARCH_IMX_V6_V7 comment "MX31 platforms:" @@ -403,6 +390,7 @@ config MACH_MX31LITE select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_RTC select IMX_HAVE_PLATFORM_SPI_IMX + select LEDS_GPIO_REGISTER help Include support for MX31 LITEKIT platform. This includes specific configurations for the board and its peripherals. @@ -445,6 +433,7 @@ config MACH_MX31_3DS select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX select MXC_ULPI if USB_ULPI @@ -471,6 +460,7 @@ config MACH_MX31MOBOARD select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX + select LEDS_GPIO_REGISTER select MXC_ULPI if USB_ULPI help Include support for mx31moboard platform. This includes specific @@ -480,6 +470,7 @@ config MACH_QONG bool "Support Dave/DENX QongEVB-LITE platform" select SOC_IMX31 select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IMX2_WDT help Include support for Dave/DENX QongEVB-LITE platform. This includes specific configurations for the board and its peripherals. @@ -551,7 +542,7 @@ config MACH_MX35_3DS Include support for MX35PDK platform. This includes specific configurations for the board and its peripherals. -config MACH_EUKREA_CPUIMX35 +config MACH_EUKREA_CPUIMX35SD bool "Support Eukrea CPUIMX35 Platform" select SOC_IMX35 select IMX_HAVE_PLATFORM_FLEXCAN @@ -569,7 +560,7 @@ config MACH_EUKREA_CPUIMX35 choice prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX35 + depends on MACH_EUKREA_CPUIMX35SD default MACH_EUKREA_MBIMXSD35_BASEBOARD config MACH_EUKREA_MBIMXSD35_BASEBOARD @@ -577,6 +568,7 @@ config MACH_EUKREA_MBIMXSD35_BASEBOARD select IMX_HAVE_PLATFORM_GPIO_KEYS select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IPU_CORE + select LEDS_GPIO_REGISTER help This adds board specific devices that can be found on Eukrea's MBIMXSD evaluation board. @@ -599,4 +591,20 @@ config MACH_VPR200 Include support for VPR200 platform. This includes specific configurations for the board and its peripherals. +comment "i.MX6 family:" + +config SOC_IMX6Q + bool "i.MX6 Quad support" + select ARM_GIC + select CACHE_L2X0 + select CPU_V7 + select HAVE_ARM_SCU + select HAVE_IMX_GPC + select HAVE_IMX_MMDC + select HAVE_IMX_SRC + select USE_OF + + help + This enables support for Freescale i.MX6 Quad processor. + endif diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index e9eb36d..d97f409 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -1,16 +1,15 @@ obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o -obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o -obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o +obj-$(CONFIG_SOC_IMX1) += clock-imx1.o mm-imx1.o +obj-$(CONFIG_SOC_IMX21) += clock-imx21.o mm-imx21.o -obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o ehci-imx25.o +obj-$(CONFIG_SOC_IMX25) += clock-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o -obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o -obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o ehci-imx27.o +obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o +obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o -obj-$(CONFIG_SOC_IMX31) += mm-imx31.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o -obj-$(CONFIG_SOC_IMX35) += mm-imx35.o cpu-imx35.o clock-imx35.o ehci-imx35.o -obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o +obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o +obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o # Support for CMOS sensor interface obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o @@ -25,7 +24,7 @@ obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o # i.MX25 based machines obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-eukrea_cpuimx25.o +obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o # i.MX27 based machines @@ -58,6 +57,17 @@ obj-$(CONFIG_MACH_BUG) += mach-bug.o # i.MX35 based machines obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o +obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o + +obj-$(CONFIG_DEBUG_LL) += lluart.o +obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o +obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o +obj-$(CONFIG_HAVE_IMX_SRC) += src.o +obj-$(CONFIG_CPU_V7) += head-v7.o +AFLAGS_head-v7.o :=-Wa,-march=armv7-a +obj-$(CONFIG_SMP) += platsmp.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o +obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o pm-imx6q.o diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index ebee18b..cfede57 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -1,19 +1,27 @@ -zreladdr-$(CONFIG_ARCH_MX1) := 0x08008000 -params_phys-$(CONFIG_ARCH_MX1) := 0x08000100 -initrd_phys-$(CONFIG_ARCH_MX1) := 0x08800000 +zreladdr-$(CONFIG_SOC_IMX1) += 0x08008000 +params_phys-$(CONFIG_SOC_IMX1) := 0x08000100 +initrd_phys-$(CONFIG_SOC_IMX1) := 0x08800000 -zreladdr-$(CONFIG_MACH_MX21) := 0xC0008000 -params_phys-$(CONFIG_MACH_MX21) := 0xC0000100 -initrd_phys-$(CONFIG_MACH_MX21) := 0xC0800000 +zreladdr-$(CONFIG_SOC_IMX21) += 0xC0008000 +params_phys-$(CONFIG_SOC_IMX21) := 0xC0000100 +initrd_phys-$(CONFIG_SOC_IMX21) := 0xC0800000 -zreladdr-$(CONFIG_ARCH_MX25) := 0x80008000 -params_phys-$(CONFIG_ARCH_MX25) := 0x80000100 -initrd_phys-$(CONFIG_ARCH_MX25) := 0x80800000 +zreladdr-$(CONFIG_SOC_IMX25) += 0x80008000 +params_phys-$(CONFIG_SOC_IMX25) := 0x80000100 +initrd_phys-$(CONFIG_SOC_IMX25) := 0x80800000 -zreladdr-$(CONFIG_MACH_MX27) := 0xA0008000 -params_phys-$(CONFIG_MACH_MX27) := 0xA0000100 -initrd_phys-$(CONFIG_MACH_MX27) := 0xA0800000 +zreladdr-$(CONFIG_SOC_IMX27) += 0xA0008000 +params_phys-$(CONFIG_SOC_IMX27) := 0xA0000100 +initrd_phys-$(CONFIG_SOC_IMX27) := 0xA0800000 -zreladdr-$(CONFIG_ARCH_MX3) := 0x80008000 -params_phys-$(CONFIG_ARCH_MX3) := 0x80000100 -initrd_phys-$(CONFIG_ARCH_MX3) := 0x80800000 +zreladdr-$(CONFIG_SOC_IMX31) += 0x80008000 +params_phys-$(CONFIG_SOC_IMX31) := 0x80000100 +initrd_phys-$(CONFIG_SOC_IMX31) := 0x80800000 + +zreladdr-$(CONFIG_SOC_IMX35) += 0x80008000 +params_phys-$(CONFIG_SOC_IMX35) := 0x80000100 +initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000 + +zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000 +params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100 +initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000 diff --git a/arch/arm/mach-imx/cache-l2x0.c b/arch/arm/mach-imx/cache-l2x0.c deleted file mode 100644 index 69d1322..0000000 --- a/arch/arm/mach-imx/cache-l2x0.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Copyright (C) 2009-2010 Pengutronix - * Sascha Hauer <s.hauer@pengutronix.de> - * Juergen Beisert <j.beisert@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/err.h> -#include <linux/kernel.h> - -#include <asm/hardware/cache-l2x0.h> - -#include <mach/hardware.h> - -static int mxc_init_l2x0(void) -{ - void __iomem *l2x0_base; - void __iomem *clkctl_base; - - if (!cpu_is_mx31() && !cpu_is_mx35()) - return 0; - -/* - * First of all, we must repair broken chip settings. There are some - * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These - * misconfigured CPUs will run amok immediately when the L2 cache gets enabled. - * Workaraound is to setup the correct register setting prior enabling the - * L2 cache. This should not hurt already working CPUs, as they are using the - * same value. - */ -#define L2_MEM_VAL 0x10 - - clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096); - if (clkctl_base != NULL) { - writel(0x00000515, clkctl_base + L2_MEM_VAL); - iounmap(clkctl_base); - } else { - pr_err("L2 cache: Cannot fix timing. Trying to continue without\n"); - } - - l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096); - if (IS_ERR(l2x0_base)) { - printk(KERN_ERR "remapping L2 cache area failed with %ld\n", - PTR_ERR(l2x0_base)); - return 0; - } - - l2x0_init(l2x0_base, 0x00030024, 0x00000000); - - return 0; -} -arch_initcall(mxc_init_l2x0); diff --git a/arch/arm/mach-imx/clock-imx1.c b/arch/arm/mach-imx/clock-imx1.c index dcc4172..4aabeb2 100644 --- a/arch/arm/mach-imx/clock-imx1.c +++ b/arch/arm/mach-imx/clock-imx1.c @@ -587,9 +587,9 @@ static struct clk_lookup lookups[] __initdata = { _REGISTER_CLOCK(NULL, "mma", mma_clk) _REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk) _REGISTER_CLOCK(NULL, "gpt", gpt_clk) - _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk) - _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk) - _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk) + _REGISTER_CLOCK("imx1-uart.0", NULL, uart_clk) + _REGISTER_CLOCK("imx1-uart.1", NULL, uart_clk) + _REGISTER_CLOCK("imx1-uart.2", NULL, uart_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) _REGISTER_CLOCK("imx1-cspi.0", NULL, spi_clk) _REGISTER_CLOCK("imx1-cspi.1", NULL, spi_clk) diff --git a/arch/arm/mach-imx/clock-imx21.c b/arch/arm/mach-imx/clock-imx21.c index bf30a8c..ee15d8c 100644 --- a/arch/arm/mach-imx/clock-imx21.c +++ b/arch/arm/mach-imx/clock-imx21.c @@ -1162,10 +1162,10 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "perclk3", per_clk[2]) _REGISTER_CLOCK(NULL, "perclk4", per_clk[3]) _REGISTER_CLOCK(NULL, "clko", clko_clk) - _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0]) - _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1]) - _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2]) - _REGISTER_CLOCK("imx-uart.3", NULL, uart_clk[3]) + _REGISTER_CLOCK("imx21-uart.0", NULL, uart_clk[0]) + _REGISTER_CLOCK("imx21-uart.1", NULL, uart_clk[1]) + _REGISTER_CLOCK("imx21-uart.2", NULL, uart_clk[2]) + _REGISTER_CLOCK("imx21-uart.3", NULL, uart_clk[3]) _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[0]) _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[1]) _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[2]) diff --git a/arch/arm/mach-imx/clock-imx25.c b/arch/arm/mach-imx/clock-imx25.c index a65838f..b0fec74c 100644 --- a/arch/arm/mach-imx/clock-imx25.c +++ b/arch/arm/mach-imx/clock-imx25.c @@ -263,6 +263,7 @@ DEFINE_CLOCK(audmux_clk, 0, CCM_CGCR1, 0, NULL, NULL, NULL); DEFINE_CLOCK(csi_clk, 0, CCM_CGCR1, 4, get_rate_csi, NULL, &csi_per_clk); DEFINE_CLOCK(can1_clk, 0, CCM_CGCR1, 2, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(can2_clk, 1, CCM_CGCR1, 3, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(iim_clk, 0, CCM_CGCR1, 26, NULL, NULL, NULL); #define _REGISTER_CLOCK(d, n, c) \ { \ @@ -272,19 +273,21 @@ DEFINE_CLOCK(can2_clk, 1, CCM_CGCR1, 3, get_rate_ipg, NULL, NULL); }, static struct clk_lookup lookups[] = { - _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) - _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) - _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) - _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk) - _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk) + /* i.mx25 has the i.mx21 type uart */ + _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk) + _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk) + _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk) _REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk) _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk) _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk) _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) - _REGISTER_CLOCK("imx25-cspi.0", NULL, cspi1_clk) - _REGISTER_CLOCK("imx25-cspi.1", NULL, cspi2_clk) - _REGISTER_CLOCK("imx25-cspi.2", NULL, cspi3_clk) + /* i.mx25 has the i.mx35 type cspi */ + _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk) + _REGISTER_CLOCK("imx35-cspi.1", NULL, cspi2_clk) + _REGISTER_CLOCK("imx35-cspi.2", NULL, cspi3_clk) _REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk) _REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk) _REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk) @@ -294,19 +297,21 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) _REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk) _REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk) - _REGISTER_CLOCK("fec.0", NULL, fec_clk) + _REGISTER_CLOCK("imx25-fec.0", NULL, fec_clk) _REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) _REGISTER_CLOCK("imx2-wdt.0", NULL, wdt_clk) _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx25.0", NULL, esdhc1_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx25.1", NULL, esdhc2_clk) _REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk) _REGISTER_CLOCK(NULL, "audmux", audmux_clk) _REGISTER_CLOCK("flexcan.0", NULL, can1_clk) _REGISTER_CLOCK("flexcan.1", NULL, can2_clk) - _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk) + /* i.mx25 has the i.mx35 type sdma */ + _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk) + _REGISTER_CLOCK(NULL, "iim", iim_clk) }; int __init mx25_clocks_init(void) @@ -328,6 +333,13 @@ int __init mx25_clocks_init(void) __raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0), CRM_BASE + 0x64); + /* Clock source for gpt is ahb_div */ + __raw_writel(__raw_readl(CRM_BASE+0x64) & ~(1 << 5), CRM_BASE + 0x64); + + clk_enable(&iim_clk); + imx_print_silicon_rev("i.MX25", mx25_revision()); + clk_disable(&iim_clk); + mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); return 0; diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c index 583f251..88fe00a 100644 --- a/arch/arm/mach-imx/clock-imx27.c +++ b/arch/arm/mach-imx/clock-imx27.c @@ -583,7 +583,7 @@ DEFINE_CLOCK(emi_clk, 0, PCCR1, 19, NULL, NULL, &ahb_clk); DEFINE_CLOCK(dma_clk1, 0, PCCR1, 20, NULL, NULL, &ahb_clk); DEFINE_CLOCK(csi_clk1, 0, PCCR1, 21, NULL, NULL, &ahb_clk); DEFINE_CLOCK(brom_clk, 0, PCCR1, 22, NULL, NULL, &ahb_clk); -DEFINE_CLOCK(ata_clk, 0, PCCR1, 23, NULL, NULL, &ahb_clk); +DEFINE_CLOCK(pata_clk, 0, PCCR1, 23, NULL, NULL, &ahb_clk); DEFINE_CLOCK(wdog_clk, 0, PCCR1, 24, NULL, NULL, &ipg_clk); DEFINE_CLOCK(usb_clk, 0, PCCR1, 25, get_rate_usb, &usb_clk1, &spll_clk); DEFINE_CLOCK(uart6_clk1, 0, PCCR1, 26, NULL, NULL, &ipg_clk); @@ -624,12 +624,13 @@ DEFINE_CLOCK1(csi_clk, 0, NULL, 0, parent, &csi_clk1, &per4_clk); }, static struct clk_lookup lookups[] = { - _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) - _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) - _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) - _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk) - _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk) - _REGISTER_CLOCK("imx-uart.5", NULL, uart6_clk) + /* i.mx27 has the i.mx21 type uart */ + _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk) + _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk) + _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk) + _REGISTER_CLOCK("imx21-uart.5", NULL, uart6_clk) _REGISTER_CLOCK(NULL, "gpt1", gpt1_clk) _REGISTER_CLOCK(NULL, "gpt2", gpt2_clk) _REGISTER_CLOCK(NULL, "gpt3", gpt3_clk) @@ -662,10 +663,10 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "brom", brom_clk) _REGISTER_CLOCK(NULL, "emma", emma_clk) _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk) - _REGISTER_CLOCK("fec.0", NULL, fec_clk) + _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk) _REGISTER_CLOCK(NULL, "emi", emi_clk) _REGISTER_CLOCK(NULL, "sahara2", sahara2_clk) - _REGISTER_CLOCK(NULL, "ata", ata_clk) + _REGISTER_CLOCK("pata_imx", NULL, pata_clk) _REGISTER_CLOCK(NULL, "mstick", mstick_clk) _REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "gpio", gpio_clk) @@ -750,6 +751,8 @@ int __init mx27_clocks_init(unsigned long fref) clk_enable(&gpio_clk); clk_enable(&emi_clk); clk_enable(&iim_clk); + imx_print_silicon_rev("i.MX27", mx27_revision()); + clk_disable(&iim_clk); #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC) clk_enable(&uart1_clk); diff --git a/arch/arm/mach-imx/clock-imx31.c b/arch/arm/mach-imx/clock-imx31.c index 25f343f..988a281 100644 --- a/arch/arm/mach-imx/clock-imx31.c +++ b/arch/arm/mach-imx/clock-imx31.c @@ -476,7 +476,7 @@ DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CGR0, 4, NULL, NULL, &perclk_clk); DEFINE_CLOCK(epit1_clk, 0, MXC_CCM_CGR0, 6, NULL, NULL, &perclk_clk); DEFINE_CLOCK(epit2_clk, 1, MXC_CCM_CGR0, 8, NULL, NULL, &perclk_clk); DEFINE_CLOCK(iim_clk, 0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk); -DEFINE_CLOCK(ata_clk, 0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(pata_clk, 0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk); DEFINE_CLOCK(sdma_clk1, 0, MXC_CCM_CGR0, 14, NULL, NULL, &ahb_clk); DEFINE_CLOCK(cspi3_clk, 2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk); DEFINE_CLOCK(rng_clk, 0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk); @@ -547,11 +547,12 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1) _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2) _REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk) - _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) - _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) - _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) - _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk) - _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk) + /* i.mx31 has the i.mx21 type uart */ + _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk) + _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk) + _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk) _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk) @@ -561,10 +562,10 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) _REGISTER_CLOCK(NULL, "firi", firi_clk) - _REGISTER_CLOCK(NULL, "ata", ata_clk) + _REGISTER_CLOCK("pata_imx", NULL, pata_clk) _REGISTER_CLOCK(NULL, "rtic", rtic_clk) _REGISTER_CLOCK(NULL, "rng", rng_clk) - _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk1) + _REGISTER_CLOCK("imx31-sdma", NULL, sdma_clk1) _REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2) _REGISTER_CLOCK(NULL, "mstick", mstick1_clk) _REGISTER_CLOCK(NULL, "mstick", mstick2_clk) @@ -610,11 +611,11 @@ int __init mx31_clocks_init(unsigned long fref) clk_enable(&gpt_clk); clk_enable(&emi_clk); clk_enable(&iim_clk); + mx31_revision(); + clk_disable(&iim_clk); clk_enable(&serial_pll_clk); - mx31_read_cpu_rev(); - if (mx31_revision() >= IMX_CHIP_REVISION_2_0) { reg = __raw_readl(MXC_CCM_PMCR1); /* No PLL restart on DVFS switch; enable auto EMI handshake */ diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c index 5a4cc1e..ac8238c 100644 --- a/arch/arm/mach-imx/clock-imx35.c +++ b/arch/arm/mach-imx/clock-imx35.c @@ -354,7 +354,7 @@ static void clk_cgr_disable(struct clk *clk) } DEFINE_CLOCK(asrc_clk, 0, CCM_CGR0, 0, NULL, NULL); -DEFINE_CLOCK(ata_clk, 0, CCM_CGR0, 2, get_rate_ipg, NULL); +DEFINE_CLOCK(pata_clk, 0, CCM_CGR0, 2, get_rate_ipg, NULL); /* DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0, 4, NULL, NULL); */ DEFINE_CLOCK(can1_clk, 0, CCM_CGR0, 6, get_rate_ipg, NULL); DEFINE_CLOCK(can2_clk, 1, CCM_CGR0, 8, get_rate_ipg, NULL); @@ -447,7 +447,7 @@ static struct clk nfc_clk = { static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "asrc", asrc_clk) - _REGISTER_CLOCK(NULL, "ata", ata_clk) + _REGISTER_CLOCK("pata_imx", NULL, pata_clk) _REGISTER_CLOCK("flexcan.0", NULL, can1_clk) _REGISTER_CLOCK("flexcan.1", NULL, can2_clk) _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk) @@ -458,10 +458,11 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-epit.0", NULL, epit1_clk) _REGISTER_CLOCK("imx-epit.1", NULL, epit2_clk) _REGISTER_CLOCK(NULL, "esai", esai_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_clk) - _REGISTER_CLOCK("fec.0", NULL, fec_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx35.0", NULL, esdhc1_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx35.1", NULL, esdhc2_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx35.2", NULL, esdhc3_clk) + /* i.mx35 has the i.mx27 type fec */ + _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk) _REGISTER_CLOCK(NULL, "gpio", gpio1_clk) _REGISTER_CLOCK(NULL, "gpio", gpio2_clk) _REGISTER_CLOCK(NULL, "gpio", gpio3_clk) @@ -481,14 +482,15 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "rtc", rtc_clk) _REGISTER_CLOCK(NULL, "rtic", rtic_clk) _REGISTER_CLOCK(NULL, "scc", scc_clk) - _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk) + _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk) _REGISTER_CLOCK(NULL, "spba", spba_clk) _REGISTER_CLOCK(NULL, "spdif", spdif_clk) _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) - _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) - _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) - _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) + /* i.mx35 has the i.mx21 type uart */ + _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk) _REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk) _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk) _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk) @@ -505,7 +507,7 @@ static struct clk_lookup lookups[] = { int __init mx35_clocks_init() { - unsigned int cgr2 = 3 << 26, cgr3 = 0; + unsigned int cgr2 = 3 << 26; #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC) cgr2 |= 3 << 16; @@ -519,6 +521,12 @@ int __init mx35_clocks_init() __raw_writel((3 << 18), CCM_BASE + CCM_CGR0); __raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16), CCM_BASE + CCM_CGR1); + __raw_writel(cgr2, CCM_BASE + CCM_CGR2); + __raw_writel(0, CCM_BASE + CCM_CGR3); + + clk_enable(&iim_clk); + imx_print_silicon_rev("i.MX35", mx35_revision()); + clk_disable(&iim_clk); /* * Check if we came up in internal boot mode. If yes, we need some @@ -527,16 +535,11 @@ int __init mx35_clocks_init() */ if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) { /* Additionally turn on UART1, SCC, and IIM clocks */ - cgr2 |= 3 << 16 | 3 << 4; - cgr3 |= 3 << 2; + clk_enable(&iim_clk); + clk_enable(&uart1_clk); + clk_enable(&scc_clk); } - __raw_writel(cgr2, CCM_BASE + CCM_CGR2); - __raw_writel(cgr3, CCM_BASE + CCM_CGR3); - - clk_enable(&iim_clk); - mx35_read_cpu_rev(); - #ifdef CONFIG_MXC_USE_EPIT epit_timer_init(&epit1_clk, MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1); diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c index 3b117be..ff38e15 100644 --- a/arch/arm/mach-imx/cpu-imx27.c +++ b/arch/arm/mach-imx/cpu-imx27.c @@ -26,12 +26,12 @@ #include <mach/hardware.h> -static int cpu_silicon_rev = -1; -static int cpu_partnumber; +static int mx27_cpu_rev = -1; +static int mx27_cpu_partnumber; #define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */ -static void query_silicon_parameter(void) +static int mx27_read_cpu_rev(void) { u32 val; /* @@ -42,20 +42,18 @@ static void query_silicon_parameter(void) val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR + SYS_CHIP_ID)); + mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF); + switch (val >> 28) { case 0: - cpu_silicon_rev = IMX_CHIP_REVISION_1_0; - break; + return IMX_CHIP_REVISION_1_0; case 1: - cpu_silicon_rev = IMX_CHIP_REVISION_2_0; - break; + return IMX_CHIP_REVISION_2_0; case 2: - cpu_silicon_rev = IMX_CHIP_REVISION_2_1; - break; + return IMX_CHIP_REVISION_2_1; default: - cpu_silicon_rev = IMX_CHIP_REVISION_UNKNOWN; + return IMX_CHIP_REVISION_UNKNOWN; } - cpu_partnumber = (int)((val >> 12) & 0xFFFF); } /* @@ -65,12 +63,12 @@ static void query_silicon_parameter(void) */ int mx27_revision(void) { - if (cpu_silicon_rev == -1) - query_silicon_parameter(); + if (mx27_cpu_rev == -1) + mx27_cpu_rev = mx27_read_cpu_rev(); - if (cpu_partnumber != 0x8821) + if (mx27_cpu_partnumber != 0x8821) return -EINVAL; - return cpu_silicon_rev; + return mx27_cpu_rev; } EXPORT_SYMBOL(mx27_revision); diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c index a378070..3f2345f 100644 --- a/arch/arm/mach-imx/cpu-imx31.c +++ b/arch/arm/mach-imx/cpu-imx31.c @@ -13,45 +13,50 @@ #include <linux/io.h> #include <mach/hardware.h> #include <mach/iim.h> +#include <mach/common.h> -unsigned int mx31_cpu_rev; -EXPORT_SYMBOL(mx31_cpu_rev); +static int mx31_cpu_rev = -1; static struct { u8 srev; const char *name; - const char *v; unsigned int rev; -} mx31_cpu_type[] __initdata = { - { .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = IMX_CHIP_REVISION_1_0 }, - { .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = IMX_CHIP_REVISION_1_1 }, - { .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = IMX_CHIP_REVISION_1_1 }, - { .srev = 0x12, .name = "i.MX31", .v = "1.15", .rev = IMX_CHIP_REVISION_1_1 }, - { .srev = 0x13, .name = "i.MX31L", .v = "1.15", .rev = IMX_CHIP_REVISION_1_1 }, - { .srev = 0x14, .name = "i.MX31", .v = "1.2", .rev = IMX_CHIP_REVISION_1_2 }, - { .srev = 0x15, .name = "i.MX31L", .v = "1.2", .rev = IMX_CHIP_REVISION_1_2 }, - { .srev = 0x28, .name = "i.MX31", .v = "2.0", .rev = IMX_CHIP_REVISION_2_0 }, - { .srev = 0x29, .name = "i.MX31L", .v = "2.0", .rev = IMX_CHIP_REVISION_2_0 }, +} mx31_cpu_type[] = { + { .srev = 0x00, .name = "i.MX31(L)", .rev = IMX_CHIP_REVISION_1_0 }, + { .srev = 0x10, .name = "i.MX31", .rev = IMX_CHIP_REVISION_1_1 }, + { .srev = 0x11, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_1_1 }, + { .srev = 0x12, .name = "i.MX31", .rev = IMX_CHIP_REVISION_1_1 }, + { .srev = 0x13, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_1_1 }, + { .srev = 0x14, .name = "i.MX31", .rev = IMX_CHIP_REVISION_1_2 }, + { .srev = 0x15, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_1_2 }, + { .srev = 0x28, .name = "i.MX31", .rev = IMX_CHIP_REVISION_2_0 }, + { .srev = 0x29, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_2_0 }, }; -void __init mx31_read_cpu_rev(void) +static int mx31_read_cpu_rev(void) { u32 i, srev; /* read SREV register from IIM module */ srev = __raw_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV)); + srev &= 0xff; for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++) if (srev == mx31_cpu_type[i].srev) { - printk(KERN_INFO - "CPU identified as %s, silicon rev %s\n", - mx31_cpu_type[i].name, mx31_cpu_type[i].v); - - mx31_cpu_rev = mx31_cpu_type[i].rev; - return; + imx_print_silicon_rev(mx31_cpu_type[i].name, + mx31_cpu_type[i].rev); + return mx31_cpu_type[i].rev; } - mx31_cpu_rev = IMX_CHIP_REVISION_UNKNOWN; + imx_print_silicon_rev("i.MX31", IMX_CHIP_REVISION_UNKNOWN); + return IMX_CHIP_REVISION_UNKNOWN; +} + +int mx31_revision(void) +{ + if (mx31_cpu_rev == -1) + mx31_cpu_rev = mx31_read_cpu_rev(); - printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev); + return mx31_cpu_rev; } +EXPORT_SYMBOL(mx31_revision); diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c index 6637cd8..846e46e 100644 --- a/arch/arm/mach-imx/cpu-imx35.c +++ b/arch/arm/mach-imx/cpu-imx35.c @@ -13,32 +13,30 @@ #include <mach/hardware.h> #include <mach/iim.h> -unsigned int mx35_cpu_rev; -EXPORT_SYMBOL(mx35_cpu_rev); +static int mx35_cpu_rev = -1; -void __init mx35_read_cpu_rev(void) +static int mx35_read_cpu_rev(void) { u32 rev; - char *srev; rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV)); switch (rev) { case 0x00: - mx35_cpu_rev = IMX_CHIP_REVISION_1_0; - srev = "1.0"; - break; + return IMX_CHIP_REVISION_1_0; case 0x10: - mx35_cpu_rev = IMX_CHIP_REVISION_2_0; - srev = "2.0"; - break; + return IMX_CHIP_REVISION_2_0; case 0x11: - mx35_cpu_rev = IMX_CHIP_REVISION_2_1; - srev = "2.1"; - break; + return IMX_CHIP_REVISION_2_1; default: - mx35_cpu_rev = IMX_CHIP_REVISION_UNKNOWN; - srev = "unknown"; + return IMX_CHIP_REVISION_UNKNOWN; } +} + +int mx35_revision(void) +{ + if (mx35_cpu_rev == -1) + mx35_cpu_rev = mx35_read_cpu_rev(); - printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev); + return mx35_cpu_rev; } +EXPORT_SYMBOL(mx35_revision); diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h index 7f97a3c..2f727d7 100644 --- a/arch/arm/mach-imx/devices-imx27.h +++ b/arch/arm/mach-imx/devices-imx27.h @@ -76,3 +76,7 @@ extern const struct imx_spi_imx_data imx27_cspi_data[]; #define imx27_add_spi_imx0(pdata) imx27_add_cspi(0, pdata) #define imx27_add_spi_imx1(pdata) imx27_add_cspi(1, pdata) #define imx27_add_spi_imx2(pdata) imx27_add_cspi(2, pdata) + +extern const struct imx_pata_imx_data imx27_pata_imx_data; +#define imx27_add_pata_imx() \ + imx_add_pata_imx(&imx27_pata_imx_data) diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h index dbe940d..488e241 100644 --- a/arch/arm/mach-imx/devices-imx31.h +++ b/arch/arm/mach-imx/devices-imx31.h @@ -78,3 +78,7 @@ extern const struct imx_spi_imx_data imx31_cspi_data[]; #define imx31_add_spi_imx0(pdata) imx31_add_cspi(0, pdata) #define imx31_add_spi_imx1(pdata) imx31_add_cspi(1, pdata) #define imx31_add_spi_imx2(pdata) imx31_add_cspi(2, pdata) + +extern const struct imx_pata_imx_data imx31_pata_imx_data; +#define imx31_add_pata_imx() \ + imx_add_pata_imx(&imx31_pata_imx_data) diff --git a/arch/arm/mach-imx/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h index 234cbd3..7b99ef0 100644 --- a/arch/arm/mach-imx/devices-imx35.h +++ b/arch/arm/mach-imx/devices-imx35.h @@ -81,3 +81,7 @@ extern const struct imx_spi_imx_data imx35_cspi_data[]; imx_add_spi_imx(&imx35_cspi_data[id], pdata) #define imx35_add_spi_imx0(pdata) imx35_add_cspi(0, pdata) #define imx35_add_spi_imx1(pdata) imx35_add_cspi(1, pdata) + +extern const struct imx_pata_imx_data imx35_pata_imx_data; +#define imx35_add_pata_imx() \ + imx_add_pata_imx(&imx35_pata_imx_data) diff --git a/arch/arm/mach-imx/dma-v1.c b/arch/arm/mach-imx/dma-v1.c index 236f149..42afc29 100644 --- a/arch/arm/mach-imx/dma-v1.c +++ b/arch/arm/mach-imx/dma-v1.c @@ -26,6 +26,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/interrupt.h> +#include <linux/err.h> #include <linux/errno.h> #include <linux/clk.h> #include <linux/scatterlist.h> @@ -475,7 +476,6 @@ void imx_dma_enable(int channel) imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) | CCR_CEN | CCR_ACRPT, DMA_CCR(channel)); -#ifdef CONFIG_ARCH_MX2 if ((cpu_is_mx21() || cpu_is_mx27()) && imxdma->sg && imx_dma_hw_chain(imxdma)) { imxdma->sg = sg_next(imxdma->sg); @@ -487,7 +487,6 @@ void imx_dma_enable(int channel) DMA_CCR(channel)); } } -#endif imxdma->in_use = 1; local_irq_restore(flags); @@ -518,7 +517,6 @@ void imx_dma_disable(int channel) } EXPORT_SYMBOL(imx_dma_disable); -#ifdef CONFIG_ARCH_MX2 static void imx_dma_watchdog(unsigned long chno) { struct imx_dma_channel *imxdma = &imx_dma_channels[chno]; @@ -530,7 +528,6 @@ static void imx_dma_watchdog(unsigned long chno) if (imxdma->err_handler) imxdma->err_handler(chno, imxdma->data, IMX_DMA_ERR_TIMEOUT); } -#endif static irqreturn_t dma_err_handler(int irq, void *dev_id) { @@ -654,10 +651,8 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id) { int i, disr; -#ifdef CONFIG_ARCH_MX2 if (cpu_is_mx21() || cpu_is_mx27()) dma_err_handler(irq, dev_id); -#endif disr = imx_dmav1_readl(DMA_DISR); @@ -703,7 +698,6 @@ int imx_dma_request(int channel, const char *name) imxdma->name = name; local_irq_restore(flags); /* request_irq() can block */ -#ifdef CONFIG_ARCH_MX2 if (cpu_is_mx21() || cpu_is_mx27()) { ret = request_irq(MX2x_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA", NULL); @@ -717,7 +711,6 @@ int imx_dma_request(int channel, const char *name) imxdma->watchdog.function = &imx_dma_watchdog; imxdma->watchdog.data = channel; } -#endif return ret; } @@ -744,10 +737,8 @@ void imx_dma_free(int channel) imx_dma_disable(channel); imxdma->name = NULL; -#ifdef CONFIG_ARCH_MX2 if (cpu_is_mx21() || cpu_is_mx27()) free_irq(MX2x_INT_DMACH0 + channel, NULL); -#endif local_irq_restore(flags); } @@ -803,21 +794,13 @@ static int __init imx_dma_init(void) int ret = 0; int i; -#ifdef CONFIG_ARCH_MX1 if (cpu_is_mx1()) imx_dmav1_baseaddr = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR); - else -#endif -#ifdef CONFIG_MACH_MX21 - if (cpu_is_mx21()) + else if (cpu_is_mx21()) imx_dmav1_baseaddr = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR); - else -#endif -#ifdef CONFIG_MACH_MX27 - if (cpu_is_mx27()) + else if (cpu_is_mx27()) imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR); else -#endif return 0; dma_clk = clk_get(NULL, "dma"); @@ -828,7 +811,6 @@ static int __init imx_dma_init(void) /* reset DMA module */ imx_dmav1_writel(DCR_DRST, DMA_DCR); -#ifdef CONFIG_ARCH_MX1 if (cpu_is_mx1()) { ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", NULL); if (ret) { @@ -843,7 +825,7 @@ static int __init imx_dma_init(void) return ret; } } -#endif + /* enable DMA module */ imx_dmav1_writel(DCR_DEN, DMA_DCR); diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index 5911281..5db3e14 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -112,7 +112,7 @@ eukrea_mbimx27_keymap_data __initconst = { .keymap_size = ARRAY_SIZE(eukrea_mbimx27_keymap), }; -static struct gpio_led gpio_leds[] = { +static const struct gpio_led eukrea_mbimx27_gpio_leds[] __initconst = { { .name = "led1", .default_trigger = "heartbeat", @@ -127,17 +127,10 @@ static struct gpio_led gpio_leds[] = { }, }; -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_led_info, - }, +static const struct gpio_led_platform_data + eukrea_mbimx27_gpio_led_info __initconst = { + .leds = eukrea_mbimx27_gpio_leds, + .num_leds = ARRAY_SIZE(eukrea_mbimx27_gpio_leds), }; static struct imx_fb_videomode eukrea_mbimx27_modes[] = { @@ -293,10 +286,6 @@ static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = { }, }; -static struct platform_device *platform_devices[] __initdata = { - &leds_gpio, -}; - static const struct imxmmc_platform_data sdhc_pdata __initconst = { .dat3_card_detect = 1, }; @@ -377,5 +366,5 @@ void __init eukrea_mbimx27_baseboard_init(void) imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data); - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info); } diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c index f9ef04a..66e8726 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c @@ -173,7 +173,7 @@ static struct platform_device eukrea_mbimxsd_lcd_powerdev = { .dev.platform_data = &eukrea_mbimxsd_lcd_power_data, }; -static struct gpio_led eukrea_mbimxsd_leds[] = { +static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = { { .name = "led1", .default_trigger = "heartbeat", @@ -182,19 +182,12 @@ static struct gpio_led eukrea_mbimxsd_leds[] = { }, }; -static struct gpio_led_platform_data eukrea_mbimxsd_led_info = { +static const struct gpio_led_platform_data + eukrea_mbimxsd_led_info __initconst = { .leds = eukrea_mbimxsd_leds, .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds), }; -static struct platform_device eukrea_mbimxsd_leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &eukrea_mbimxsd_led_info, - }, -}; - static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = { { .gpio = GPIO_SWITCH1, @@ -212,7 +205,6 @@ static const struct gpio_keys_platform_data }; static struct platform_device *platform_devices[] __initdata = { - &eukrea_mbimxsd_leds_gpio, &eukrea_mbimxsd_lcd_powerdev, }; @@ -233,7 +225,8 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { static struct esdhc_platform_data sd1_pdata = { .cd_gpio = GPIO_SD1CD, - .wp_gpio = -EINVAL, + .cd_type = ESDHC_CD_GPIO, + .wp_type = ESDHC_WP_NONE, }; /* @@ -287,5 +280,6 @@ void __init eukrea_mbimxsd25_baseboard_init(void) ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + gpio_led_register_device(-1, &eukrea_mbimxsd_led_info); imx_add_gpio_keys(&eukrea_mbimxsd_button_data); } diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c index 4909ea0..0f0af02 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c @@ -193,19 +193,12 @@ static struct gpio_led eukrea_mbimxsd_leds[] = { }, }; -static struct gpio_led_platform_data eukrea_mbimxsd_led_info = { +static const struct gpio_led_platform_data + eukrea_mbimxsd_led_info __initconst = { .leds = eukrea_mbimxsd_leds, .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds), }; -static struct platform_device eukrea_mbimxsd_leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &eukrea_mbimxsd_led_info, - }, -}; - static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = { { .gpio = GPIO_SWITCH1, @@ -223,7 +216,6 @@ static const struct gpio_keys_platform_data }; static struct platform_device *platform_devices[] __initdata = { - &eukrea_mbimxsd_leds_gpio, &eukrea_mbimxsd_lcd_powerdev, }; @@ -244,7 +236,8 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { static struct esdhc_platform_data sd1_pdata = { .cd_gpio = GPIO_SD1CD, - .wp_gpio = -EINVAL, + .cd_type = ESDHC_CD_GPIO, + .wp_type = ESDHC_WP_NONE, }; /* @@ -299,5 +292,6 @@ void __init eukrea_mbimxsd35_baseboard_init(void) ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + gpio_led_register_device(-1, &eukrea_mbimxsd_led_info); imx_add_gpio_keys(&eukrea_mbimxsd_button_data); } diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c index cf8f809..82bd440 100644 --- a/arch/arm/mach-imx/iomux-imx31.c +++ b/arch/arm/mach-imx/iomux-imx31.c @@ -17,13 +17,12 @@ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. */ - +#include <linux/gpio.h> #include <linux/module.h> #include <linux/spinlock.h> #include <linux/io.h> #include <linux/kernel.h> #include <mach/hardware.h> -#include <mach/gpio.h> #include <mach/iomux-mx3.h> /* diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c index 15e45c8..1e486e6 100644 --- a/arch/arm/mach-imx/mach-apf9328.c +++ b/arch/arm/mach-imx/mach-apf9328.c @@ -99,11 +99,6 @@ static struct platform_device dm9000x_device = { } }; -/* --- SERIAL RESSOURCE --- */ -static const struct imxuart_platform_data uart0_pdata __initconst = { - .flags = 0, -}; - static const struct imxuart_platform_data uart1_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -115,11 +110,13 @@ static struct platform_device *devices[] __initdata = { static void __init apf9328_init(void) { + imx1_soc_init(); + mxc_gpio_setup_multiple_pins(apf9328_pins, ARRAY_SIZE(apf9328_pins), "APF9328"); - imx1_add_imx_uart0(&uart0_pdata); + imx1_add_imx_uart0(NULL); imx1_add_imx_uart1(&uart1_pdata); platform_add_devices(devices, ARRAY_SIZE(devices)); @@ -139,6 +136,7 @@ MACHINE_START(APF9328, "Armadeus APF9328") .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, + .handle_irq = imx1_handle_irq, .timer = &apf9328_timer, .init_machine = apf9328_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index ffb40ff..c9a9cf6 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -314,25 +314,19 @@ static struct mtd_partition armadillo5x0_nor_flash_partitions[] = { }, }; -static struct physmap_flash_data armadillo5x0_nor_flash_pdata = { +static const struct physmap_flash_data + armadillo5x0_nor_flash_pdata __initconst = { .width = 2, .parts = armadillo5x0_nor_flash_partitions, .nr_parts = ARRAY_SIZE(armadillo5x0_nor_flash_partitions), }; -static struct resource armadillo5x0_nor_flash_resource = { +static const struct resource armadillo5x0_nor_flash_resource __initconst = { .flags = IORESOURCE_MEM, .start = MX31_CS0_BASE_ADDR, .end = MX31_CS0_BASE_ADDR + SZ_64M - 1, }; -static struct platform_device armadillo5x0_nor_flash = { - .name = "physmap-flash", - .id = -1, - .num_resources = 1, - .resource = &armadillo5x0_nor_flash_resource, -}; - /* * FB support */ @@ -490,6 +484,8 @@ static struct platform_device *devices[] __initdata = { */ static void __init armadillo5x0_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(armadillo5x0_pins, ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0"); @@ -512,8 +508,10 @@ static void __init armadillo5x0_init(void) imx31_add_mx3_sdc_fb(&mx3fb_pdata); /* Register NOR Flash */ - mxc_register_device(&armadillo5x0_nor_flash, - &armadillo5x0_nor_flash_pdata); + platform_device_register_resndata(NULL, "physmap-flash", -1, + &armadillo5x0_nor_flash_resource, 1, + &armadillo5x0_nor_flash_pdata, + sizeof(armadillo5x0_nor_flash_pdata)); /* Register NAND Flash */ imx31_add_mxc_nand(&armadillo5x0_nand_board_info); @@ -556,10 +554,11 @@ static struct sys_timer armadillo5x0_timer = { MACHINE_START(ARMADILLO5X0, "Armadillo-500") /* Maintainer: Alberto Panizzo */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, + .handle_irq = imx31_handle_irq, .timer = &armadillo5x0_timer, .init_machine = armadillo5x0_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c index 42e4f07..313f62d 100644 --- a/arch/arm/mach-imx/mach-bug.c +++ b/arch/arm/mach-imx/mach-bug.c @@ -42,6 +42,8 @@ static const unsigned int bug_pins[] __initconst = { static void __init bug_board_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(bug_pins, ARRAY_SIZE(bug_pins), "uart-4"); imx31_add_imx_uart4(&uart_pdata); @@ -60,6 +62,7 @@ MACHINE_START(BUG, "BugLabs BUGBase") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, + .handle_irq = imx31_handle_irq, .timer = &bug_timer, .init_machine = bug_board_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 46a2e41..edb3730 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -250,6 +250,8 @@ __setup("otg_mode=", eukrea_cpuimx27_otg_mode); static void __init eukrea_cpuimx27_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins, ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27"); @@ -308,11 +310,12 @@ static struct sys_timer eukrea_cpuimx27_timer = { .init = eukrea_cpuimx27_timer_init, }; -MACHINE_START(CPUIMX27, "EUKREA CPUIMX27") - .boot_params = MX27_PHYS_OFFSET + 0x100, +MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27") + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, + .handle_irq = imx27_handle_irq, .timer = &eukrea_cpuimx27_timer, .init_machine = eukrea_cpuimx27_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 3f8ef82..362aae7 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -53,12 +53,18 @@ static const struct imxi2c_platform_data .bitrate = 100000, }; +#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 2) +static int tsc2007_get_pendown_state(void) +{ + return !gpio_get_value(TSC2007_IRQGPIO); +} + static struct tsc2007_platform_data tsc2007_info = { .model = 2007, .x_plate_ohms = 180, + .get_pendown_state = tsc2007_get_pendown_state, }; -#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 2) static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { { I2C_BOARD_INFO("pcf8563", 0x51), @@ -66,7 +72,7 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { I2C_BOARD_INFO("tsc2007", 0x48), .type = "tsc2007", .platform_data = &tsc2007_info, - .irq = gpio_to_irq(TSC2007_IRQGPIO), + .irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO), }, }; @@ -156,6 +162,8 @@ __setup("otg_mode=", eukrea_cpuimx35_otg_mode); */ static void __init eukrea_cpuimx35_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads, ARRAY_SIZE(eukrea_cpuimx35_pads)); @@ -190,12 +198,13 @@ struct sys_timer eukrea_cpuimx35_timer = { .init = eukrea_cpuimx35_timer_init, }; -MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35") +MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35") /* Maintainer: Eukrea Electromatique */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, + .handle_irq = imx35_handle_irq, .timer = &eukrea_cpuimx35_timer, .init_machine = eukrea_cpuimx35_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index 148cff2..ab8fbcc 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -125,6 +125,8 @@ __setup("otg_mode=", eukrea_cpuimx25_otg_mode); static void __init eukrea_cpuimx25_init(void) { + imx25_soc_init(); + if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads, ARRAY_SIZE(eukrea_cpuimx25_pads))) printk(KERN_ERR "error setting cpuimx25 pads !\n"); @@ -159,12 +161,13 @@ static struct sys_timer eukrea_cpuimx25_timer = { .init = eukrea_cpuimx25_timer_init, }; -MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25") +MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25") /* Maintainer: Eukrea Electromatique */ - .boot_params = MX25_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx25_map_io, .init_early = imx25_init_early, .init_irq = mx25_init_irq, + .handle_irq = imx25_handle_irq, .timer = &eukrea_cpuimx25_timer, .init_machine = eukrea_cpuimx25_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 7ae43b1..38eb9e4 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -30,11 +30,12 @@ #include <linux/input.h> #include <linux/gpio.h> #include <linux/delay.h> +#include <sound/tlv320aic32x4.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <mach/common.h> -#include <mach/iomux.h> +#include <mach/iomux-mx27.h> #include "devices-imx27.h" @@ -196,6 +197,17 @@ static struct pca953x_platform_data visstrim_m10_pca9555_pdata = { .invert = 0, }; +static struct aic32x4_pdata visstrim_m10_aic32x4_pdata = { + .power_cfg = AIC32X4_PWR_MICBIAS_2075_LDOIN | + AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE | + AIC32X4_PWR_AIC32X4_LDO_ENABLE | + AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36 | + AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED, + .micpga_routing = AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K | + AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K, + .swapdacs = false, +}; + static struct i2c_board_info visstrim_m10_i2c_devices[] = { { I2C_BOARD_INFO("pca9555", 0x20), @@ -203,6 +215,7 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = { }, { I2C_BOARD_INFO("tlv320aic32x4", 0x18), + .platform_data = &visstrim_m10_aic32x4_pdata, } }; @@ -231,6 +244,8 @@ static void __init visstrim_m10_board_init(void) { int ret; + imx27_soc_init(); + ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins, ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10"); if (ret) @@ -260,10 +275,11 @@ static struct sys_timer visstrim_m10_timer = { }; MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, + .handle_irq = imx27_handle_irq, .timer = &visstrim_m10_timer, .init_machine = visstrim_m10_board_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c index 9be6cd6..7052155 100644 --- a/arch/arm/mach-imx/mach-imx27ipcam.c +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -50,6 +50,8 @@ static const int mx27ipcam_pins[] __initconst = { static void __init mx27ipcam_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27ipcam_pins, ARRAY_SIZE(mx27ipcam_pins), "mx27ipcam"); @@ -69,10 +71,11 @@ static struct sys_timer mx27ipcam_timer = { MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM") /* maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, + .handle_irq = imx27_handle_irq, .timer = &mx27ipcam_timer, .init_machine = mx27ipcam_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index 8411405..8d6a635 100644 --- a/arch/arm/mach-imx/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -59,6 +59,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = { static void __init mx27lite_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins), "imx27lite"); imx27_add_imx_uart0(&uart_pdata); @@ -75,10 +77,11 @@ static struct sys_timer mx27lite_timer = { }; MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE") - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, + .handle_irq = imx27_handle_irq, .timer = &mx27lite_timer, .init_machine = mx27lite_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 1ecae20..5f37f89 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -36,6 +36,7 @@ #include <mach/clock.h> #include <mach/common.h> +#include <mach/hardware.h> #include <mach/iomux-mx3.h> #include "devices-imx31.h" @@ -223,6 +224,8 @@ static int kzm_pins[] __initdata = { */ static void __init kzm_board_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(kzm_pins, ARRAY_SIZE(kzm_pins), "kzm"); kzm_init_ext_uart(); @@ -269,10 +272,11 @@ static struct sys_timer kzm_timer = { }; MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = kzm_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, + .handle_irq = imx31_handle_irq, .timer = &kzm_timer, .init_machine = kzm_board_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 38ec5cb..fc49785 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -68,23 +68,16 @@ static const struct imxuart_platform_data uart1_pdata __initconst = { * Physmap flash */ -static struct physmap_flash_data mx1ads_flash_data = { +static const struct physmap_flash_data mx1ads_flash_data __initconst = { .width = 4, /* bankwidth in bytes */ }; -static struct resource flash_resource = { +static const struct resource flash_resource __initconst = { .start = MX1_CS0_PHYS, .end = MX1_CS0_PHYS + SZ_32M - 1, .flags = IORESOURCE_MEM, }; -static struct platform_device flash_device = { - .name = "physmap-flash", - .id = 0, - .resource = &flash_resource, - .num_resources = 1, -}; - /* * I2C */ @@ -115,6 +108,8 @@ static struct i2c_board_info mx1ads_i2c_devices[] = { */ static void __init mx1ads_init(void) { + imx1_soc_init(); + mxc_gpio_setup_multiple_pins(mx1ads_pins, ARRAY_SIZE(mx1ads_pins), "mx1ads"); @@ -123,7 +118,9 @@ static void __init mx1ads_init(void) imx1_add_imx_uart1(&uart1_pdata); /* Physmap flash */ - mxc_register_device(&flash_device, &mx1ads_flash_data); + platform_device_register_resndata(NULL, "physmap-flash", 0, + &flash_resource, 1, + &mx1ads_flash_data, sizeof(mx1ads_flash_data)); /* I2C */ i2c_register_board_info(0, mx1ads_i2c_devices, @@ -143,19 +140,21 @@ struct sys_timer mx1ads_timer = { MACHINE_START(MX1ADS, "Freescale MX1ADS") /* Maintainer: Sascha Hauer, Pengutronix */ - .boot_params = MX1_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, + .handle_irq = imx1_handle_irq, .timer = &mx1ads_timer, .init_machine = mx1ads_init, MACHINE_END MACHINE_START(MXLADS, "Freescale MXLADS") - .boot_params = MX1_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, + .handle_irq = imx1_handle_irq, .timer = &mx1ads_timer, .init_machine = mx1ads_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index a37fe02..ad994b3 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -279,6 +279,8 @@ static struct platform_device *platform_devices[] __initdata = { static void __init mx21ads_board_init(void) { + imx21_soc_init(); + mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins), "mx21ads"); @@ -303,10 +305,11 @@ static struct sys_timer mx21ads_timer = { MACHINE_START(MX21ADS, "Freescale i.MX21ADS") /* maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX21_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx21ads_map_io, .init_early = imx21_init_early, .init_irq = mx21_init_irq, + .handle_irq = imx21_handle_irq, .timer = &mx21ads_timer, .init_machine = mx21ads_board_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index 58ea3fd..88dccf1 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -43,6 +43,8 @@ #include "devices-imx25.h" +#define MX25PDK_CAN_PWDN IMX_GPIO_NR(4, 6) + static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -108,6 +110,11 @@ static iomux_v3_cfg_t mx25pdk_pads[] = { /* I2C1 */ MX25_PAD_I2C1_CLK__I2C1_CLK, MX25_PAD_I2C1_DAT__I2C1_DAT, + + /* CAN1 */ + MX25_PAD_GPIO_A__CAN1_TX, + MX25_PAD_GPIO_B__CAN1_RX, + MX25_PAD_D14__GPIO_4_6, /* CAN_PWDN */ }; static const struct fec_platform_data mx25_fec_pdata __initconst = { @@ -215,10 +222,14 @@ static const struct imxi2c_platform_data mx25_3ds_i2c0_data __initconst = { static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = { .wp_gpio = SD1_GPIO_WP, .cd_gpio = SD1_GPIO_CD, + .wp_type = ESDHC_WP_GPIO, + .cd_type = ESDHC_CD_GPIO, }; static void __init mx25pdk_init(void) { + imx25_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads, ARRAY_SIZE(mx25pdk_pads)); @@ -236,6 +247,9 @@ static void __init mx25pdk_init(void) imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata); imx25_add_imx_i2c0(&mx25_3ds_i2c0_data); + + gpio_request_one(MX25PDK_CAN_PWDN, GPIOF_OUT_INIT_LOW, "can-pwdn"); + imx25_add_flexcan0(NULL); } static void __init mx25pdk_timer_init(void) @@ -249,10 +263,11 @@ static struct sys_timer mx25pdk_timer = { MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX25_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx25_map_io, .init_early = imx25_init_early, .init_irq = mx25_init_irq, + .handle_irq = imx25_handle_irq, .timer = &mx25pdk_timer, .init_machine = mx25pdk_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 6e1accf..ba232d7 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -29,6 +29,7 @@ #include <linux/mfd/mc13783.h> #include <linux/spi/spi.h> #include <linux/regulator/machine.h> +#include <linux/spi/l4f00242t03.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -42,10 +43,15 @@ #include "devices-imx27.h" -#define SD1_EN_GPIO (GPIO_PORTB + 25) -#define OTG_PHY_RESET_GPIO (GPIO_PORTB + 23) -#define SPI2_SS0 (GPIO_PORTD + 21) -#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTC + 28) +#define SD1_EN_GPIO IMX_GPIO_NR(2, 25) +#define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23) +#define SPI2_SS0 IMX_GPIO_NR(4, 21) +#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(3, 28)) +#define PMIC_INT IMX_GPIO_NR(3, 14) +#define SPI1_SS0 IMX_GPIO_NR(4, 28) +#define SD1_CD IMX_GPIO_NR(2, 26) +#define LCD_RESET IMX_GPIO_NR(1, 3) +#define LCD_ENABLE IMX_GPIO_NR(1, 31) static const int mx27pdk_pins[] __initconst = { /* UART1 */ @@ -94,13 +100,47 @@ static const int mx27pdk_pins[] __initconst = { PE2_PF_USBOTG_DIR, PE24_PF_USBOTG_CLK, PE25_PF_USBOTG_DATA7, + /* CSPI1 */ + PD31_PF_CSPI1_MOSI, + PD30_PF_CSPI1_MISO, + PD29_PF_CSPI1_SCLK, + PD25_PF_CSPI1_RDY, + SPI1_SS0 | GPIO_GPIO | GPIO_OUT, /* CSPI2 */ PD22_PF_CSPI2_SCLK, PD23_PF_CSPI2_MISO, PD24_PF_CSPI2_MOSI, + SPI2_SS0 | GPIO_GPIO | GPIO_OUT, /* I2C1 */ PD17_PF_I2C_DATA, PD18_PF_I2C_CLK, + /* PMIC INT */ + PMIC_INT | GPIO_GPIO | GPIO_IN, + /* LCD */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA23_PF_LD17, + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA30_PF_CONTRAST, + LCD_ENABLE | GPIO_GPIO | GPIO_OUT, + LCD_RESET | GPIO_GPIO | GPIO_OUT, }; static const struct imxuart_platform_data uart_pdata __initconst = { @@ -131,13 +171,13 @@ static const struct matrix_keymap_data mx27_3ds_keymap_data __initconst = { static int mx27_3ds_sdhc1_init(struct device *dev, irq_handler_t detect_irq, void *data) { - return request_irq(IRQ_GPIOB(26), detect_irq, IRQF_TRIGGER_FALLING | - IRQF_TRIGGER_RISING, "sdhc1-card-detect", data); + return request_irq(gpio_to_irq(SD1_CD), detect_irq, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-card-detect", data); } static void mx27_3ds_sdhc1_exit(struct device *dev, void *data) { - free_irq(IRQ_GPIOB(26), data); + free_irq(gpio_to_irq(SD1_CD), data); } static const struct imxmmc_platform_data sdhc1_pdata __initconst = { @@ -193,22 +233,31 @@ static int __init mx27_3ds_otg_mode(char *options) __setup("otg_mode=", mx27_3ds_otg_mode); /* Regulators */ +static struct regulator_init_data gpo_init = { + .constraints = { + .boot_on = 1, + .always_on = 1, + } +}; + static struct regulator_consumer_supply vmmc1_consumers[] = { - REGULATOR_SUPPLY("lcd_2v8", NULL), + REGULATOR_SUPPLY("vcore", "spi0.0"), }; static struct regulator_init_data vmmc1_init = { .constraints = { .min_uV = 2800000, .max_uV = 2800000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers), .consumer_supplies = vmmc1_consumers, }; static struct regulator_consumer_supply vgen_consumers[] = { - REGULATOR_SUPPLY("vdd_lcdio", NULL), + REGULATOR_SUPPLY("vdd", "spi0.0"), }; static struct regulator_init_data vgen_init = { @@ -228,6 +277,12 @@ static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = { }, { .id = MC13783_REG_VGEN, .init_data = &vgen_init, + }, { + .id = MC13783_REG_GPO1, /* Turn on 1.8V */ + .init_data = &gpo_init, + }, { + .id = MC13783_REG_GPO3, /* Turn on 3.3V */ + .init_data = &gpo_init, }, }; @@ -238,15 +293,60 @@ static struct mc13xxx_platform_data mc13783_pdata = { .num_regulators = ARRAY_SIZE(mx27_3ds_regulators), }, - .flags = MC13783_USE_REGULATOR, + .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC, }; /* SPI */ -static int spi2_internal_chipselect[] = {SPI2_SS0}; +static int spi1_chipselect[] = {SPI1_SS0}; + +static const struct spi_imx_master spi1_pdata __initconst = { + .chipselect = spi1_chipselect, + .num_chipselect = ARRAY_SIZE(spi1_chipselect), +}; + +static int spi2_chipselect[] = {SPI2_SS0}; static const struct spi_imx_master spi2_pdata __initconst = { - .chipselect = spi2_internal_chipselect, - .num_chipselect = ARRAY_SIZE(spi2_internal_chipselect), + .chipselect = spi2_chipselect, + .num_chipselect = ARRAY_SIZE(spi2_chipselect), +}; + +static struct imx_fb_videomode mx27_3ds_modes[] = { + { /* 480x640 @ 60 Hz */ + .mode = { + .name = "Epson-VGA", + .refresh = 60, + .xres = 480, + .yres = 640, + .pixclock = 41701, + .left_margin = 20, + .right_margin = 41, + .upper_margin = 10, + .lower_margin = 5, + .hsync_len = 20, + .vsync_len = 10, + .sync = FB_SYNC_OE_ACT_HIGH | + FB_SYNC_CLK_INVERT, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, + .bpp = 16, + .pcr = 0xFAC08B82, + }, +}; + +static const struct imx_fb_platform_data mx27_3ds_fb_data __initconst = { + .mode = mx27_3ds_modes, + .num_modes = ARRAY_SIZE(mx27_3ds_modes), + .pwmr = 0x00A903FF, + .lscr1 = 0x00120300, + .dmacr = 0x00020010, +}; + +/* LCD */ +static struct l4f00242t03_pdata mx27_3ds_lcd_pdata = { + .reset_gpio = LCD_RESET, + .data_enable_gpio = LCD_ENABLE, }; static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { @@ -256,8 +356,14 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { .bus_num = 1, .chip_select = 0, /* SS0 */ .platform_data = &mc13783_pdata, - .irq = IRQ_GPIOC(14), + .irq = IMX_GPIO_TO_IRQ(PMIC_INT), .mode = SPI_CS_HIGH, + }, { + .modalias = "l4f00242t03", + .max_speed_hz = 5000000, + .bus_num = 0, + .chip_select = 0, /* SS0 */ + .platform_data = &mx27_3ds_lcd_pdata, }, }; @@ -267,6 +373,8 @@ static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = { static void __init mx27pdk_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins), "mx27pdk"); mx27_3ds_sdhc1_enable_level_translator(); @@ -289,12 +397,14 @@ static void __init mx27pdk_init(void) imx27_add_fsl_usb2_udc(&otg_device_pdata); imx27_add_spi_imx1(&spi2_pdata); + imx27_add_spi_imx0(&spi1_pdata); spi_register_board_info(mx27_3ds_spi_devs, ARRAY_SIZE(mx27_3ds_spi_devs)); if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT)) pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n"); imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data); + imx27_add_imx_fb(&mx27_3ds_fb_data); } static void __init mx27pdk_timer_init(void) @@ -308,10 +418,11 @@ static struct sys_timer mx27pdk_timer = { MACHINE_START(MX27_3DS, "Freescale MX27PDK") /* maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, + .handle_irq = imx27_handle_irq, .timer = &mx27pdk_timer, .init_machine = mx27pdk_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 1db7950..74dd573 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -13,7 +13,7 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ - +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> @@ -27,7 +27,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <mach/iomux-mx27.h> #include "devices-imx27.h" @@ -288,6 +287,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = { static void __init mx27ads_board_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins), "mx27ads"); @@ -343,10 +344,11 @@ static void __init mx27ads_map_io(void) MACHINE_START(MX27ADS, "Freescale i.MX27ADS") /* maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27ads_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, + .handle_irq = imx27_handle_irq, .timer = &mx27ads_timer, .init_machine = mx27ads_board_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 9b98244..b8c54b8 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -13,6 +13,7 @@ */ #include <linux/delay.h> +#include <linux/dma-mapping.h> #include <linux/types.h> #include <linux/init.h> #include <linux/clk.h> @@ -53,11 +54,8 @@ static int mx31_3ds_pins[] = { MX31_PIN_RXD1__RXD1, IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), /*SPI0*/ - MX31_PIN_CSPI1_SCLK__SCLK, - MX31_PIN_CSPI1_MOSI__MOSI, - MX31_PIN_CSPI1_MISO__MISO, - MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, - MX31_PIN_CSPI1_SS2__SS2, /* CS for LCD */ + IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_ALT1), + IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_ALT1), /* SPI 1 */ MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_MOSI__MOSI, @@ -287,8 +285,6 @@ static struct mx3fb_platform_data mx3fb_pdata __initdata = { static struct l4f00242t03_pdata mx31_3ds_l4f00242t03_pdata = { .reset_gpio = IOMUX_TO_GPIO(MX31_PIN_LCS1), .data_enable_gpio = IOMUX_TO_GPIO(MX31_PIN_SER_RS), - .core_supply = "lcd_2v8", - .io_supply = "vdd_lcdio", }; /* @@ -413,7 +409,7 @@ static struct regulator_init_data vmmc2_init = { }; static struct regulator_consumer_supply vmmc1_consumers[] = { - REGULATOR_SUPPLY("lcd_2v8", NULL), + REGULATOR_SUPPLY("vcore", "spi0.0"), REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"), }; @@ -430,7 +426,7 @@ static struct regulator_init_data vmmc1_init = { }; static struct regulator_consumer_supply vgen_consumers[] = { - REGULATOR_SUPPLY("vdd_lcdio", NULL), + REGULATOR_SUPPLY("vdd", "spi0.0"), }; static struct regulator_init_data vgen_init = { @@ -496,7 +492,7 @@ static struct mc13xxx_platform_data mc13783_pdata = { .regulators = mx31_3ds_regulators, .num_regulators = ARRAY_SIZE(mx31_3ds_regulators), }, - .flags = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN, + .flags = MC13XXX_USE_TOUCHSCREEN, }; /* SPI */ @@ -544,7 +540,7 @@ static const struct mxc_nand_platform_data mx31_3ds_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, -#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT +#ifdef CONFIG_MACH_MX31_3DS_MXC_NAND_USE_BBT .flash_bbt = 1, #endif }; @@ -689,6 +685,11 @@ static void __init mx31_3ds_init(void) { int ret; + imx31_soc_init(); + + /* Configure SPI1 IOMUX */ + mxc_iomux_set_gpr(MUX_PGP_CSPI_BB, true); + mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins), "mx31_3ds"); @@ -761,10 +762,11 @@ static void __init mx31_3ds_reserve(void) MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, + .handle_irq = imx31_handle_irq, .timer = &mx31_3ds_timer, .init_machine = mx31_3ds_init, .reserve = mx31_3ds_reserve, diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index f4dee02..9cc1a49 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -468,7 +468,7 @@ static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = { #endif }; -static void mxc_init_i2c(void) +static void __init mxc_init_i2c(void) { i2c_register_board_info(1, mx31ads_i2c1_devices, ARRAY_SIZE(mx31ads_i2c1_devices)); @@ -486,7 +486,7 @@ static unsigned int ssi_pins[] = { MX31_PIN_STXD5__STXD5, }; -static void mxc_init_audio(void) +static void __init mxc_init_audio(void) { imx31_add_imx_ssi(0, NULL); mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi"); @@ -516,6 +516,8 @@ static void __init mx31ads_init_irq(void) static void __init mx31ads_init(void) { + imx31_soc_init(); + mxc_init_extuart(); mxc_init_imx_uart(); mxc_init_i2c(); @@ -533,10 +535,11 @@ static struct sys_timer mx31ads_timer = { MACHINE_START(MX31ADS, "Freescale MX31ADS") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx31ads_map_io, .init_early = imx31_init_early, .init_irq = mx31ads_init_irq, + .handle_irq = imx31_handle_irq, .timer = &mx31ads_timer, .init_machine = mx31ads_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 410e676..102ec99 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -27,6 +27,7 @@ #include <linux/delay.h> #include <linux/platform_device.h> #include <linux/interrupt.h> +#include <linux/moduleparam.h> #include <linux/smsc911x.h> #include <linux/mtd/physmap.h> #include <linux/spi/spi.h> @@ -192,7 +193,7 @@ static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, }; -static void lilly1131_usb_init(void) +static void __init lilly1131_usb_init(void) { imx31_add_mxc_ehci_hs(1, &usbh1_pdata); @@ -243,6 +244,8 @@ core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444); static void __init mx31lilly_board_init(void) { + imx31_soc_init(); + switch (mx31lilly_baseboard) { case MX31LILLY_NOBOARD: break; @@ -293,10 +296,11 @@ static struct sys_timer mx31lilly_timer = { }; MACHINE_START(LILLY1131, "INCO startec LILLY-1131") - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, + .handle_irq = imx31_handle_irq, .timer = &mx31lilly_timer, .init_machine = mx31lilly_board_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index ac9b4ca..5366d2d 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -21,6 +21,7 @@ #include <linux/memory.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/moduleparam.h> #include <linux/smsc911x.h> #include <linux/mfd/mc13783.h> #include <linux/spi/spi.h> @@ -112,8 +113,7 @@ static const struct spi_imx_master spi1_pdata __initconst = { }; static struct mc13xxx_platform_data mc13783_pdata __initdata = { - .flags = MC13XXX_USE_RTC | - MC13XXX_USE_REGULATOR, + .flags = MC13XXX_USE_RTC, }; static struct spi_board_info mc13783_spi_dev __initdata = { @@ -230,6 +230,8 @@ static void __init mx31lite_init(void) { int ret; + imx31_soc_init(); + switch (mx31lite_baseboard) { case MX31LITE_NOBOARD: break; @@ -278,10 +280,11 @@ struct sys_timer mx31lite_timer = { MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") /* Maintainer: Freescale Semiconductor, Inc. */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx31lite_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, + .handle_irq = imx31_handle_irq, .timer = &mx31lite_timer, .init_machine = mx31lite_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index eaa51e4..9326915 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -18,6 +18,7 @@ #include <linux/gpio.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/moduleparam.h> #include <linux/leds.h> #include <linux/memory.h> #include <linux/mtd/physmap.h> @@ -28,6 +29,10 @@ #include <linux/spi/spi.h> #include <linux/types.h> #include <linux/memblock.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/input.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> @@ -222,7 +227,7 @@ static struct mc13xxx_regulator_init_data moboard_regulators[] = { }, }; -static struct mc13783_led_platform_data moboard_led[] = { +static struct mc13xxx_led_platform_data moboard_led[] = { { .id = MC13783_LED_R1, .name = "coreboard-led-4:red", @@ -255,7 +260,7 @@ static struct mc13783_led_platform_data moboard_led[] = { }, }; -static struct mc13783_leds_platform_data moboard_leds = { +static struct mc13xxx_leds_platform_data moboard_leds = { .num_leds = ARRAY_SIZE(moboard_led), .led = moboard_led, .flags = MC13783_LED_SLEWLIMTC, @@ -264,14 +269,20 @@ static struct mc13783_leds_platform_data moboard_leds = { .tc2_period = MC13783_LED_PERIOD_10MS, }; +static struct mc13xxx_buttons_platform_data moboard_buttons = { + .b1on_flags = MC13783_BUTTON_DBNC_750MS | MC13783_BUTTON_ENABLE | + MC13783_BUTTON_POL_INVERT, + .b1on_key = KEY_POWER, +}; + static struct mc13xxx_platform_data moboard_pmic = { .regulators = { .regulators = moboard_regulators, .num_regulators = ARRAY_SIZE(moboard_regulators), }, .leds = &moboard_leds, - .flags = MC13XXX_USE_REGULATOR | MC13XXX_USE_RTC | - MC13XXX_USE_ADC | MC13XXX_USE_LED, + .buttons = &moboard_buttons, + .flags = MC13XXX_USE_RTC | MC13XXX_USE_ADC, }; static struct spi_board_info moboard_spi_board_info[] __initdata = { @@ -425,7 +436,7 @@ static int __init moboard_usbh2_init(void) return 0; } -static struct gpio_led mx31moboard_leds[] = { +static const struct gpio_led mx31moboard_leds[] __initconst = { { .name = "coreboard-led-0:red:running", .default_trigger = "heartbeat", @@ -442,26 +453,17 @@ static struct gpio_led mx31moboard_leds[] = { }, }; -static struct gpio_led_platform_data mx31moboard_led_pdata = { +static const struct gpio_led_platform_data mx31moboard_led_pdata __initconst = { .num_leds = ARRAY_SIZE(mx31moboard_leds), .leds = mx31moboard_leds, }; -static struct platform_device mx31moboard_leds_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &mx31moboard_led_pdata, - }, -}; - static const struct ipu_platform_data mx3_ipu_data __initconst = { .irq_base = MXC_IPU_IRQ_START, }; static struct platform_device *devices[] __initdata = { &mx31moboard_flash, - &mx31moboard_leds_device, }; static struct mx3_camera_pdata camera_pdata __initdata = { @@ -499,6 +501,18 @@ err: } +static void mx31moboard_poweroff(void) +{ + struct clk *clk = clk_get_sys("imx2-wdt.0", NULL); + + if (!IS_ERR(clk)) + clk_enable(clk); + + mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST); + + __raw_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); +} + static int mx31moboard_baseboard; core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444); @@ -507,10 +521,13 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444); */ static void __init mx31moboard_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins), "moboard"); platform_add_devices(devices, ARRAY_SIZE(devices)); + gpio_led_register_device(-1, &mx31moboard_led_pdata); imx31_add_imx_uart0(&uart0_pdata); imx31_add_imx_uart4(&uart4_pdata); @@ -534,6 +551,8 @@ static void __init mx31moboard_init(void) moboard_usbh2_init(); + pm_power_off = mx31moboard_poweroff; + switch (mx31moboard_baseboard) { case MX31NOBOARD: break; @@ -573,11 +592,12 @@ static void __init mx31moboard_reserve(void) MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") /* Maintainer: Valentin Longchamp, EPFL Mobots group */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .reserve = mx31moboard_reserve, .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, + .handle_irq = imx31_handle_irq, .timer = &mx31moboard_timer, .init_machine = mx31moboard_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 882880a..7a46202 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -43,7 +43,7 @@ #include "devices-imx35.h" -#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 1) +#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 1)) static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, @@ -179,6 +179,8 @@ static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = { */ static void __init mx35_3ds_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); imx35_add_fec(NULL); @@ -215,10 +217,11 @@ struct sys_timer mx35pdk_timer = { MACHINE_START(MX35_3DS, "Freescale MX35PDK") /* Maintainer: Freescale Semiconductor, Inc */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, + .handle_irq = imx35_handle_irq, .timer = &mx35pdk_timer, .init_machine = mx35_3ds_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index 2774541..125c196 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -233,6 +233,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = { static void __init mxt_td60_board_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins), "MXT_TD60"); @@ -265,10 +267,11 @@ static struct sys_timer mxt_td60_timer = { MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60") /* maintainer: Maxtrack Industrial */ - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, + .handle_irq = imx27_handle_irq, .timer = &mxt_td60_timer, .init_machine = mxt_td60_board_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index bbddc5a..26072f4 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -357,6 +357,8 @@ static void __init pca100_init(void) { int ret; + imx27_soc_init(); + /* SSI unit */ mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0, MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */ @@ -433,10 +435,11 @@ static struct sys_timer pca100_timer = { }; MACHINE_START(PCA100, "phyCARD-i.MX27") - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, + .handle_irq = imx27_handle_irq, .init_machine = pca100_init, .timer = &pca100_timer, MACHINE_END diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index 89c213b..efd6b53 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -576,6 +576,8 @@ static void __init pcm037_init(void) { int ret; + imx31_soc_init(); + mxc_iomux_set_gpr(MUX_PGP_UH2, 1); mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins), @@ -686,11 +688,12 @@ static void __init pcm037_reserve(void) MACHINE_START(PCM037, "Phytec Phycore pcm037") /* Maintainer: Pengutronix */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .reserve = pcm037_reserve, .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, + .handle_irq = imx31_handle_irq, .timer = &pcm037_timer, .init_machine = pcm037_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 853bb87..a17e9c7 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -176,7 +176,9 @@ static struct platform_device *platform_devices[] __initdata = { * setup other stuffs to access the sram. */ static void __init pcm038_init_sram(void) { - mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00); + __raw_writel(0x0000d843, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(1))); + __raw_writel(0x22252521, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(1))); + __raw_writel(0x22220a00, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(1))); } static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = { @@ -266,8 +268,7 @@ static struct mc13xxx_platform_data pcm038_pmic = { .regulators = pcm038_regulators, .num_regulators = ARRAY_SIZE(pcm038_regulators), }, - .flags = MC13783_USE_ADC | MC13783_USE_REGULATOR | - MC13783_USE_TOUCHSCREEN, + .flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN, }; static struct spi_board_info pcm038_spi_board_info[] __initdata = { @@ -295,6 +296,8 @@ static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { static void __init pcm038_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins), "PCM038"); @@ -347,10 +350,11 @@ static struct sys_timer pcm038_timer = { }; MACHINE_START(PCM038, "phyCORE-i.MX27") - .boot_params = MX27_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, + .handle_irq = imx27_handle_irq, .timer = &pcm038_timer, .init_machine = pcm038_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 0264416..7366c2a 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -349,6 +349,8 @@ __setup("otg_mode=", pcm043_otg_mode); static struct esdhc_platform_data sd1_pdata = { .wp_gpio = SD1_GPIO_WP, .cd_gpio = SD1_GPIO_CD, + .wp_type = ESDHC_WP_GPIO, + .cd_type = ESDHC_CD_GPIO, }; /* @@ -356,6 +358,8 @@ static struct esdhc_platform_data sd1_pdata = { */ static void __init pcm043_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); mxc_audmux_v2_configure_port(3, @@ -414,10 +418,11 @@ struct sys_timer pcm043_timer = { MACHINE_START(PCM043, "Phytec Phycore pcm043") /* Maintainer: Pengutronix */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, + .handle_irq = imx35_handle_irq, .timer = &pcm043_timer, .init_machine = pcm043_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index c163287..4ff5faf 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -190,7 +190,10 @@ static struct platform_device qong_nand_device = { static void __init qong_init_nand_mtd(void) { /* init CS */ - mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800); + __raw_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3))); + __raw_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3))); + __raw_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3))); + mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true); /* enable pin */ @@ -244,9 +247,12 @@ static void __init qong_init_fpga(void) */ static void __init qong_init(void) { + imx31_soc_init(); + mxc_init_imx_uart(); qong_init_nor_mtd(); qong_init_fpga(); + imx31_add_imx2_wdt(NULL); } static void __init qong_timer_init(void) @@ -260,10 +266,11 @@ static struct sys_timer qong_timer = { MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") /* Maintainer: DENX Software Engineering GmbH */ - .boot_params = MX3x_PHYS_OFFSET + 0x100, + .atag_offset = 0x100, .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, + .handle_irq = imx31_handle_irq, .timer = &qong_timer, .init_machine = qong_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index dcaee04..bb6e5b2 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -101,21 +101,7 @@ static const int mxc_uart1_pins[] = { PC12_PF_UART1_RXD, }; -static int uart1_mxc_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins), "UART1"); -} - -static void uart1_mxc_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins)); -} - static const struct imxuart_platform_data uart_pdata __initconst = { - .init = uart1_mxc_init, - .exit = uart1_mxc_exit, .flags = IMXUART_HAVE_RTSCTS, }; @@ -129,6 +115,11 @@ static struct platform_device *devices[] __initdata = { */ static void __init scb9328_init(void) { + imx1_soc_init(); + + mxc_gpio_setup_multiple_pins(mxc_uart1_pins, + ARRAY_SIZE(mxc_uart1_pins), "UART1"); + imx1_add_imx_uart0(&uart_pdata); printk(KERN_INFO"Scb9328: Adding devices\n"); @@ -146,10 +137,11 @@ static struct sys_timer scb9328_timer = { MACHINE_START(SCB9328, "Synertronixx scb9328") /* Sascha Hauer */ - .boot_params = 0x08000100, + .atag_offset = 100, .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, + .handle_irq = imx1_handle_irq, .timer = &scb9328_timer, .init_machine = scb9328_init, MACHINE_END diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index d74e347..6909245 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -162,7 +162,7 @@ static struct i2c_board_info vpr200_i2c_devices[] = { }, { I2C_BOARD_INFO("mc13892", 0x08), .platform_data = &vpr200_pmic, - .irq = gpio_to_irq(GPIO_PMIC_INT), + .irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT), } }; @@ -267,6 +267,8 @@ static struct platform_device *devices[] __initdata = { */ static void __init vpr200_board_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads)); imx35_add_fec(NULL); @@ -317,6 +319,7 @@ MACHINE_START(VPR200, "VPR200") .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, + .handle_irq = imx35_handle_irq, .timer = &vpr200_timer, .init_machine = vpr200_board_init, MACHINE_END diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c index 2e482ba..2bded59 100644 --- a/arch/arm/mach-imx/mm-imx1.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -23,7 +23,6 @@ #include <mach/common.h> #include <mach/hardware.h> -#include <mach/gpio.h> #include <mach/irqs.h> #include <mach/iomux-v1.h> @@ -44,15 +43,19 @@ void __init imx1_init_early(void) MX1_NUM_GPIO_PORT); } -static struct mxc_gpio_port imx1_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 0, 1, MX1_GPIO_INT_PORTA), - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 1, 2, MX1_GPIO_INT_PORTB), - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 2, 3, MX1_GPIO_INT_PORTC), - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 3, 4, MX1_GPIO_INT_PORTD), -}; - void __init mx1_init_irq(void) { mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR)); - mxc_gpio_init(imx1_gpio_ports, ARRAY_SIZE(imx1_gpio_ports)); +} + +void __init imx1_soc_init(void) +{ + mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTA, 0); + mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTB, 0); + mxc_register_gpio("imx1-gpio", 2, MX1_GPIO3_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTC, 0); + mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTD, 0); } diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index 7a0c500..3f05dfe 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -22,9 +22,9 @@ #include <linux/init.h> #include <mach/hardware.h> #include <mach/common.h> +#include <mach/devices-common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <mach/irqs.h> #include <mach/iomux-v1.h> @@ -70,17 +70,19 @@ void __init imx21_init_early(void) MX21_NUM_GPIO_PORT); } -static struct mxc_gpio_port imx21_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX21, 0, 1, MX21_INT_GPIO), - DEFINE_IMX_GPIO_PORT(MX21, 1, 2), - DEFINE_IMX_GPIO_PORT(MX21, 2, 3), - DEFINE_IMX_GPIO_PORT(MX21, 3, 4), - DEFINE_IMX_GPIO_PORT(MX21, 4, 5), - DEFINE_IMX_GPIO_PORT(MX21, 5, 6), -}; - void __init mx21_init_irq(void) { mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR)); - mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports)); +} + +void __init imx21_soc_init(void) +{ + mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + + imx_add_imx_dma(); } diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index 02f7b5c..cc4d152 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -24,10 +24,10 @@ #include <asm/mach/map.h> #include <mach/common.h> +#include <mach/devices-common.h> #include <mach/hardware.h> #include <mach/mx25.h> #include <mach/iomux-v3.h> -#include <mach/gpio.h> #include <mach/irqs.h> /* @@ -57,16 +57,40 @@ void __init imx25_init_early(void) mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR)); } -static struct mxc_gpio_port imx25_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 0, 1, MX25_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 1, 2, MX25_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 2, 3, MX25_INT_GPIO3), - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 3, 4, MX25_INT_GPIO4), -}; - void __init mx25_init_irq(void) { mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR)); - mxc_gpio_init(imx25_gpio_ports, ARRAY_SIZE(imx25_gpio_ports)); } +static struct sdma_script_start_addrs imx25_sdma_script __initdata = { + .ap_2_ap_addr = 729, + .uart_2_mcu_addr = 904, + .per_2_app_addr = 1255, + .mcu_2_app_addr = 834, + .uartsh_2_mcu_addr = 1120, + .per_2_shp_addr = 1329, + .mcu_2_shp_addr = 1048, + .ata_2_mcu_addr = 1560, + .mcu_2_ata_addr = 1479, + .app_2_per_addr = 1189, + .app_2_mcu_addr = 770, + .shp_2_per_addr = 1407, + .shp_2_mcu_addr = 979, +}; + +static struct sdma_platform_data imx25_sdma_pdata __initdata = { + .fw_name = "sdma-imx25.bin", + .script_addrs = &imx25_sdma_script, +}; + +void __init imx25_soc_init(void) +{ + /* i.mx25 has the i.mx31 type gpio */ + mxc_register_gpio("imx31-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0); + mxc_register_gpio("imx31-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0); + mxc_register_gpio("imx31-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0); + mxc_register_gpio("imx31-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0); + + /* i.mx25 has the i.mx35 type sdma */ + imx_add_imx_sdma("imx35-sdma", MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata); +} diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index a6761a3..96dd1f5 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -22,9 +22,9 @@ #include <linux/init.h> #include <mach/hardware.h> #include <mach/common.h> +#include <mach/devices-common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <mach/irqs.h> #include <mach/iomux-v1.h> @@ -70,17 +70,20 @@ void __init imx27_init_early(void) MX27_NUM_GPIO_PORT); } -static struct mxc_gpio_port imx27_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX27, 0, 1, MX27_INT_GPIO), - DEFINE_IMX_GPIO_PORT(MX27, 1, 2), - DEFINE_IMX_GPIO_PORT(MX27, 2, 3), - DEFINE_IMX_GPIO_PORT(MX27, 3, 4), - DEFINE_IMX_GPIO_PORT(MX27, 4, 5), - DEFINE_IMX_GPIO_PORT(MX27, 5, 6), -}; - void __init mx27_init_irq(void) { mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR)); - mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports)); +} + +void __init imx27_soc_init(void) +{ + /* i.mx27 has the i.mx21 type gpio */ + mxc_register_gpio("imx21-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 2, MX27_GPIO3_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + + imx_add_imx_dma(); } diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c deleted file mode 100644 index 86b9b45..0000000 --- a/arch/arm/mach-imx/mm-imx31.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * Copyright (C) 1999,2000 Arm Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - add MX31 specific definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/err.h> - -#include <asm/pgtable.h> -#include <asm/mach/map.h> - -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-v3.h> -#include <mach/gpio.h> -#include <mach/irqs.h> - -static struct map_desc mx31_io_desc[] __initdata = { - imx_map_entry(MX31, X_MEMC, MT_DEVICE), - imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED), - imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED), - imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED), - imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED), -}; - -/* - * This function initializes the memory map. It is called during the - * system startup to create static physical to virtual memory mappings - * for the IO modules. - */ -void __init mx31_map_io(void) -{ - iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc)); -} - -void __init imx31_init_early(void) -{ - mxc_set_cpu_type(MXC_CPU_MX31); - mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); -} - -static struct mxc_gpio_port imx31_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3), -}; - -void __init mx31_init_irq(void) -{ - mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR)); - mxc_gpio_init(imx31_gpio_ports, ARRAY_SIZE(imx31_gpio_ports)); -} diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c deleted file mode 100644 index c880e6d..0000000 --- a/arch/arm/mach-imx/mm-imx35.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Copyright (C) 1999,2000 Arm Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - add MX31 specific definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/err.h> - -#include <asm/pgtable.h> -#include <asm/mach/map.h> -#include <asm/hardware/cache-l2x0.h> - -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-v3.h> -#include <mach/gpio.h> -#include <mach/irqs.h> - -static struct map_desc mx35_io_desc[] __initdata = { - imx_map_entry(MX35, X_MEMC, MT_DEVICE), - imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED), - imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED), - imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED), - imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED), -}; - -void __init mx35_map_io(void) -{ - iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc)); -} - -void __init imx35_init_early(void) -{ - mxc_set_cpu_type(MXC_CPU_MX35); - mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); - mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); -} - -static struct mxc_gpio_port imx35_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3), -}; - -void __init mx35_init_irq(void) -{ - mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); - mxc_gpio_init(imx35_gpio_ports, ARRAY_SIZE(imx35_gpio_ports)); -} diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c index 5aa053e..bf0fb87 100644 --- a/arch/arm/mach-imx/mx31lite-db.c +++ b/arch/arm/mach-imx/mx31lite-db.c @@ -161,7 +161,7 @@ static const struct spi_imx_master spi0_pdata __initconst = { /* GPIO LEDs */ -static struct gpio_led litekit_leds[] = { +static const struct gpio_led litekit_leds[] __initconst = { { .name = "GPIO0", .gpio = IOMUX_TO_GPIO(MX31_PIN_COMPARE), @@ -176,19 +176,12 @@ static struct gpio_led litekit_leds[] = { } }; -static struct gpio_led_platform_data litekit_led_platform_data = { +static const struct gpio_led_platform_data + litekit_led_platform_data __initconst = { .leds = litekit_leds, .num_leds = ARRAY_SIZE(litekit_leds), }; -static struct platform_device litekit_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &litekit_led_platform_data, - }, -}; - void __init mx31lite_db_init(void) { mxc_iomux_setup_multiple_pins(litekit_db_board_pins, @@ -197,7 +190,7 @@ void __init mx31lite_db_init(void) imx31_add_imx_uart0(&uart_pdata); imx31_add_mxc_mmc(0, &mmc_pdata); imx31_add_spi_imx0(&spi0_pdata); - platform_device_register(&litekit_led_device); + gpio_led_register_device(-1, &litekit_led_platform_data); imx31_add_imx2_wdt(NULL); imx31_add_mxc_rtc(NULL); } diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c index acf1769..e455d2f 100644 --- a/arch/arm/mach-imx/pm-imx27.c +++ b/arch/arm/mach-imx/pm-imx27.c @@ -11,7 +11,7 @@ #include <linux/suspend.h> #include <linux/io.h> #include <mach/system.h> -#include <mach/mx27.h> +#include <mach/hardware.h> static int mx27_suspend_enter(suspend_state_t state) { |