diff options
Diffstat (limited to 'arch/arm/mach-kirkwood/netspace_v2-setup.c')
| -rw-r--r-- | arch/arm/mach-kirkwood/netspace_v2-setup.c | 325 |
1 files changed, 325 insertions, 0 deletions
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c new file mode 100644 index 0000000..9a06406 --- /dev/null +++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c @@ -0,0 +1,325 @@ +/* + * arch/arm/mach-kirkwood/netspace_v2-setup.c + * + * LaCie Network Space v2 board setup + * + * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com> + * Copyright (C) 2009 Benoît Canet <benoit.canet@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/i2c.h> +#include <linux/i2c/at24.h> +#include <linux/input.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/leds.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <mach/kirkwood.h> +#include <plat/time.h> +#include "common.h" +#include "mpp.h" + +/***************************************************************************** + * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005) + ****************************************************************************/ + +static struct mtd_partition netspace_v2_flash_parts[] = { + { + .name = "u-boot", + .size = MTDPART_SIZ_FULL, + .offset = 0, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, +}; + +static const struct flash_platform_data netspace_v2_flash = { + .type = "mx25l4005a", + .name = "spi_flash", + .parts = netspace_v2_flash_parts, + .nr_parts = ARRAY_SIZE(netspace_v2_flash_parts), +}; + +static struct spi_board_info __initdata netspace_v2_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &netspace_v2_flash, + .irq = -1, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data netspace_v2_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +/***************************************************************************** + * I2C devices + ****************************************************************************/ + +static struct at24_platform_data at24c04 = { + .byte_len = SZ_4K / 8, + .page_size = 16, +}; + +/* + * i2c addr | chip | description + * 0x50 | HT24LC04 | eeprom (512B) + */ + +static struct i2c_board_info __initdata netspace_v2_i2c_info[] = { + { + I2C_BOARD_INFO("24c04", 0x50), + .platform_data = &at24c04, + } +}; + +/***************************************************************************** + * SATA + ****************************************************************************/ + +static struct mv_sata_platform_data netspace_v2_sata_data = { + .n_ports = 2, +}; + +#define NETSPACE_V2_GPIO_SATA0_POWER 16 +#define NETSPACE_V2_GPIO_SATA1_POWER 17 + +static void __init netspace_v2_sata_power_init(void) +{ + int err; + + err = gpio_request(NETSPACE_V2_GPIO_SATA0_POWER, "SATA0 power"); + if (err == 0) { + err = gpio_direction_output(NETSPACE_V2_GPIO_SATA0_POWER, 1); + if (err) + gpio_free(NETSPACE_V2_GPIO_SATA0_POWER); + } + if (err) + pr_err("netspace_v2: failed to setup SATA0 power\n"); +} + +/***************************************************************************** + * GPIO keys + ****************************************************************************/ + +#define NETSPACE_V2_PUSH_BUTTON 32 + +static struct gpio_keys_button netspace_v2_buttons[] = { + [0] = { + .code = KEY_POWER, + .gpio = NETSPACE_V2_PUSH_BUTTON, + .desc = "Power push button", + .active_low = 0, + }, +}; + +static struct gpio_keys_platform_data netspace_v2_button_data = { + .buttons = netspace_v2_buttons, + .nbuttons = ARRAY_SIZE(netspace_v2_buttons), +}; + +static struct platform_device netspace_v2_gpio_buttons = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &netspace_v2_button_data, + }, +}; + +/***************************************************************************** + * GPIO LEDs + ****************************************************************************/ + +/* + * The blue front LED is wired to a CPLD and can blink in relation with the + * SATA activity. + * + * The following array detail the different LED registers and the combination + * of their possible values: + * + * cmd_led | slow_led | /SATA active | LED state + * | | | + * 1 | 0 | x | off + * - | 1 | x | on + * 0 | 0 | 1 | on + * 0 | 0 | 0 | blink (rate 300ms) + */ + +#define NETSPACE_V2_GPIO_RED_LED 12 +#define NETSPACE_V2_GPIO_BLUE_LED_SLOW 29 +#define NETSPACE_V2_GPIO_BLUE_LED_CMD 30 + + +static struct gpio_led netspace_v2_gpio_led_pins[] = { + { + .name = "ns_v2:red:fail", + .gpio = NETSPACE_V2_GPIO_RED_LED, + }, +}; + +static struct gpio_led_platform_data netspace_v2_gpio_leds_data = { + .num_leds = ARRAY_SIZE(netspace_v2_gpio_led_pins), + .leds = netspace_v2_gpio_led_pins, +}; + +static struct platform_device netspace_v2_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &netspace_v2_gpio_leds_data, + }, +}; + +static void __init netspace_v2_gpio_leds_init(void) +{ + platform_device_register(&netspace_v2_gpio_leds); + + /* + * Configure the front blue LED to blink in relation with the SATA + * activity. + */ + if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW, + "SATA blue LED slow") != 0) + return; + if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0) != 0) + goto err_free_1; + if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_CMD, + "SATA blue LED command") != 0) + goto err_free_1; + if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_CMD, 0) != 0) + goto err_free_2; + + return; + +err_free_2: + gpio_free(NETSPACE_V2_GPIO_BLUE_LED_CMD); +err_free_1: + gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW); + pr_err("netspace_v2: failed to configure SATA blue LED\n"); +} + +/***************************************************************************** + * Timer + ****************************************************************************/ + +static void netspace_v2_timer_init(void) +{ + kirkwood_tclk = 166666667; + orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); +} + +struct sys_timer netspace_v2_timer = { + .init = netspace_v2_timer_init, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +static unsigned int netspace_v2_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP8_TW_SDA, + MPP9_TW_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_GPO, /* Red led */ + MPP14_GPIO, /* USB fuse */ + MPP16_GPIO, /* SATA 0 power */ + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_SATA1_ACTn, + MPP21_SATA0_ACTn, + MPP24_GPIO, /* USB mode select */ + MPP25_GPIO, /* Fan rotation fail */ + MPP26_GPIO, /* USB device vbus */ + MPP28_GPIO, /* USB enable host vbus */ + MPP29_GPIO, /* Blue led (slow register) */ + MPP30_GPIO, /* Blue led (command register) */ + MPP31_GPIO, /* Board power off */ + MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ + 0 +}; + +#define NETSPACE_V2_GPIO_POWER_OFF 31 + +static void netspace_v2_power_off(void) +{ + gpio_set_value(NETSPACE_V2_GPIO_POWER_OFF, 1); +} + +static void __init netspace_v2_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_init(); + kirkwood_mpp_conf(netspace_v2_mpp_config); + + netspace_v2_sata_power_init(); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&netspace_v2_ge00_data); + kirkwood_sata_init(&netspace_v2_sata_data); + kirkwood_uart0_init(); + spi_register_board_info(netspace_v2_spi_slave_info, + ARRAY_SIZE(netspace_v2_spi_slave_info)); + kirkwood_spi_init(); + kirkwood_i2c_init(); + i2c_register_board_info(0, netspace_v2_i2c_info, + ARRAY_SIZE(netspace_v2_i2c_info)); + + netspace_v2_gpio_leds_init(); + platform_device_register(&netspace_v2_gpio_buttons); + + if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 && + gpio_direction_output(NETSPACE_V2_GPIO_POWER_OFF, 0) == 0) + pm_power_off = netspace_v2_power_off; + else + pr_err("netspace_v2: failed to configure power-off GPIO\n"); +} + +MACHINE_START(NETSPACE_V2, "LaCie Network Space v2") + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = netspace_v2_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &netspace_v2_timer, +MACHINE_END |