diff options
Diffstat (limited to 'arch/arm/mach-mmp/gplugd.c')
| -rw-r--r-- | arch/arm/mach-mmp/gplugd.c | 197 |
1 files changed, 197 insertions, 0 deletions
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c new file mode 100644 index 0000000..4665767 --- /dev/null +++ b/arch/arm/mach-mmp/gplugd.c @@ -0,0 +1,197 @@ +/* + * linux/arch/arm/mach-mmp/gplugd.c + * + * Support for the Marvell PXA168-based GuruPlug Display (gplugD) Platform. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/gpio.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <mach/pxa168.h> +#include <mach/mfp-pxa168.h> + +#include "common.h" + +static unsigned long gplugd_pin_config[] __initdata = { + /* UART3 */ + GPIO8_UART3_TXD, + GPIO9_UART3_RXD, + GPIO1O_UART3_CTS, + GPIO11_UART3_RTS, + + /* USB OTG PEN */ + GPIO18_GPIO, + + /* MMC2 */ + GPIO28_MMC2_CMD, + GPIO29_MMC2_CLK, + GPIO30_MMC2_DAT0, + GPIO31_MMC2_DAT1, + GPIO32_MMC2_DAT2, + GPIO33_MMC2_DAT3, + + /* LCD & HDMI clock selection GPIO: 0: 74.176MHz, 1: 74.25 MHz */ + GPIO35_GPIO, + GPIO36_GPIO, /* CEC Interrupt */ + + /* MMC1 */ + GPIO43_MMC1_CLK, + GPIO49_MMC1_CMD, + GPIO41_MMC1_DAT0, + GPIO40_MMC1_DAT1, + GPIO52_MMC1_DAT2, + GPIO51_MMC1_DAT3, + GPIO53_MMC1_CD, + + /* LCD */ + GPIO56_LCD_FCLK_RD, + GPIO57_LCD_LCLK_A0, + GPIO58_LCD_PCLK_WR, + GPIO59_LCD_DENA_BIAS, + GPIO60_LCD_DD0, + GPIO61_LCD_DD1, + GPIO62_LCD_DD2, + GPIO63_LCD_DD3, + GPIO64_LCD_DD4, + GPIO65_LCD_DD5, + GPIO66_LCD_DD6, + GPIO67_LCD_DD7, + GPIO68_LCD_DD8, + GPIO69_LCD_DD9, + GPIO70_LCD_DD10, + GPIO71_LCD_DD11, + GPIO72_LCD_DD12, + GPIO73_LCD_DD13, + GPIO74_LCD_DD14, + GPIO75_LCD_DD15, + GPIO76_LCD_DD16, + GPIO77_LCD_DD17, + GPIO78_LCD_DD18, + GPIO79_LCD_DD19, + GPIO80_LCD_DD20, + GPIO81_LCD_DD21, + GPIO82_LCD_DD22, + GPIO83_LCD_DD23, + + /* GPIO */ + GPIO84_GPIO, + GPIO85_GPIO, + + /* Fast-Ethernet*/ + GPIO86_TX_CLK, + GPIO87_TX_EN, + GPIO88_TX_DQ3, + GPIO89_TX_DQ2, + GPIO90_TX_DQ1, + GPIO91_TX_DQ0, + GPIO92_MII_CRS, + GPIO93_MII_COL, + GPIO94_RX_CLK, + GPIO95_RX_ER, + GPIO96_RX_DQ3, + GPIO97_RX_DQ2, + GPIO98_RX_DQ1, + GPIO99_RX_DQ0, + GPIO100_MII_MDC, + GPIO101_MII_MDIO, + GPIO103_RX_DV, + GPIO104_GPIO, /* Reset PHY */ + + /* RTC interrupt */ + GPIO102_GPIO, + + /* I2C */ + GPIO105_CI2C_SDA, + GPIO106_CI2C_SCL, + + /* SPI NOR Flash on SSP2 */ + GPIO107_SSP2_RXD, + GPIO108_SSP2_TXD, + GPIO110_GPIO, /* SPI_CSn */ + GPIO111_SSP2_CLK, + + /* Select JTAG */ + GPIO109_GPIO, + + /* I2S */ + GPIO114_I2S_FRM, + GPIO115_I2S_BCLK, + GPIO116_I2S_TXD +}; + +static struct i2c_board_info gplugd_i2c_board_info[] = { + { + .type = "isl1208", + .addr = 0x6F, + } +}; + +/* Bring PHY out of reset by setting GPIO 104 */ +static int gplugd_eth_init(void) +{ + if (unlikely(gpio_request(104, "ETH_RESET_N"))) { + printk(KERN_ERR "Can't get hold of GPIO 104 to bring Ethernet " + "PHY out of reset\n"); + return -EIO; + } + + gpio_direction_output(104, 1); + gpio_free(104); + return 0; +} + +struct pxa168_eth_platform_data gplugd_eth_platform_data = { + .port_number = 0, + .phy_addr = 0, + .speed = 0, /* Autonagotiation */ + .init = gplugd_eth_init, +}; + +static void __init select_disp_freq(void) +{ + /* set GPIO 35 & clear GPIO 85 to set LCD External Clock to 74.25 MHz */ + if (unlikely(gpio_request(35, "DISP_FREQ_SEL"))) { + printk(KERN_ERR "Can't get hold of GPIO 35 to select display " + "frequency\n"); + } else { + gpio_direction_output(35, 1); + gpio_free(35); + } + + if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) { + printk(KERN_ERR "Can't get hold of GPIO 85 to select display " + "frequency\n"); + } else { + gpio_direction_output(85, 0); + gpio_free(85); + } +} + +static void __init gplugd_init(void) +{ + mfp_config(ARRAY_AND_SIZE(gplugd_pin_config)); + + select_disp_freq(); + + /* on-chip devices */ + pxa168_add_uart(3); + pxa168_add_ssp(1); + pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info)); + + pxa168_add_eth(&gplugd_eth_platform_data); +} + +MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform") + .map_io = mmp_map_io, + .nr_irqs = IRQ_BOARD_START, + .init_irq = pxa168_init_irq, + .timer = &pxa168_timer, + .init_machine = gplugd_init, +MACHINE_END |