diff options
Diffstat (limited to 'arch/arm/mach-s5p64x0/include/mach/pm-core.h')
| -rw-r--r-- | arch/arm/mach-s5p64x0/include/mach/pm-core.h | 117 |
1 files changed, 117 insertions, 0 deletions
diff --git a/arch/arm/mach-s5p64x0/include/mach/pm-core.h b/arch/arm/mach-s5p64x0/include/mach/pm-core.h new file mode 100644 index 0000000..e52f754 --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/pm-core.h @@ -0,0 +1,117 @@ +/* linux/arch/arm/mach-s5p64x0/include/mach/pm-core.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P64X0 - PM core support for arch/arm/plat-samsung/pm.c + * + * Based on PM core support for S3C64XX by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <mach/regs-gpio.h> + +static inline void s3c_pm_debug_init_uart(void) +{ + u32 tmp = __raw_readl(S5P64X0_CLK_GATE_PCLK); + + /* + * As a note, since the S5P64X0 UARTs generally have multiple + * clock sources, we simply enable PCLK at the moment and hope + * that the resume settings for the UART are suitable for the + * use with PCLK. + */ + tmp |= S5P64X0_CLK_GATE_PCLK_UART0; + tmp |= S5P64X0_CLK_GATE_PCLK_UART1; + tmp |= S5P64X0_CLK_GATE_PCLK_UART2; + tmp |= S5P64X0_CLK_GATE_PCLK_UART3; + + __raw_writel(tmp, S5P64X0_CLK_GATE_PCLK); + udelay(10); +} + +static inline void s3c_pm_arch_prepare_irqs(void) +{ + /* VIC should have already been taken care of */ + + /* clear any pending EINT0 interrupts */ + __raw_writel(__raw_readl(S5P64X0_EINT0PEND), S5P64X0_EINT0PEND); +} + +static inline void s3c_pm_arch_stop_clocks(void) { } +static inline void s3c_pm_arch_show_resume_irqs(void) { } + +/* + * make these defines, we currently do not have any need to change + * the IRQ wake controls depending on the CPU we are running on + */ +#define s3c_irqwake_eintallow ((1 << 16) - 1) +#define s3c_irqwake_intallow (~0) + +static inline void s3c_pm_arch_update_uart(void __iomem *regs, + struct pm_uart_save *save) +{ + u32 ucon = __raw_readl(regs + S3C2410_UCON); + u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK; + u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK; + u32 new_ucon; + u32 delta; + + /* + * S5P64X0 UART blocks only support level interrupts, so ensure that + * when we restore unused UART blocks we force the level interrupt + * settings. + */ + save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL; + + /* + * We have a constraint on changing the clock type of the UART + * between UCLKx and PCLK, so ensure that when we restore UCON + * that the CLK field is correctly modified if the bootloader + * has changed anything. + */ + if (ucon_clk != save_clk) { + new_ucon = save->ucon; + delta = ucon_clk ^ save_clk; + + /* + * change from UCLKx => wrong PCLK, + * either UCLK can be tested for by a bit-test + * with UCLK0 + */ + if (ucon_clk & S3C6400_UCON_UCLK0 && + !(save_clk & S3C6400_UCON_UCLK0) && + delta & S3C6400_UCON_PCLK2) { + new_ucon &= ~S3C6400_UCON_UCLK0; + } else if (delta == S3C6400_UCON_PCLK2) { + /* + * as a precaution, don't change from + * PCLK2 => PCLK or vice-versa + */ + new_ucon ^= S3C6400_UCON_PCLK2; + } + + S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n", + ucon, new_ucon, save->ucon); + save->ucon = new_ucon; + } +} + +static inline void s3c_pm_restored_gpios(void) +{ + /* ensure sleep mode has been cleared from the system */ + __raw_writel(0, S5P64X0_SLPEN); +} + +static inline void samsung_pm_saved_gpios(void) +{ + /* + * turn on the sleep mode and keep it there, as it seems that during + * suspend the xCON registers get re-set and thus you can end up with + * problems between going to sleep and resuming. + */ + __raw_writel(S5P64X0_SLPEN_USE_xSLP, S5P64X0_SLPEN); +} |