aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-u300
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-u300')
-rw-r--r--arch/arm/mach-u300/Kconfig49
-rw-r--r--arch/arm/mach-u300/Makefile2
-rw-r--r--arch/arm/mach-u300/Makefile.boot17
-rw-r--r--arch/arm/mach-u300/core.c199
-rw-r--r--arch/arm/mach-u300/i2c.c51
-rw-r--r--arch/arm/mach-u300/include/mach/debug-macro.S2
-rw-r--r--arch/arm/mach-u300/include/mach/gpio.h295
-rw-r--r--arch/arm/mach-u300/include/mach/irqs.h19
-rw-r--r--arch/arm/mach-u300/include/mach/memory.h27
-rw-r--r--arch/arm/mach-u300/include/mach/syscon.h136
-rw-r--r--arch/arm/mach-u300/include/mach/u300-regs.h2
-rw-r--r--arch/arm/mach-u300/mmc.c18
-rw-r--r--arch/arm/mach-u300/padmux.c367
-rw-r--r--arch/arm/mach-u300/padmux.h39
-rw-r--r--arch/arm/mach-u300/spi.c24
-rw-r--r--arch/arm/mach-u300/timer.c33
-rw-r--r--arch/arm/mach-u300/u300.c18
17 files changed, 153 insertions, 1145 deletions
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 32a7b0f..1cbcd4f 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -6,6 +6,9 @@ comment "ST-Ericsson Mobile Platform Products"
config MACH_U300
bool "U300"
+ select PINCTRL
+ select PINMUX_U300
+ select GPIO_U300
comment "ST-Ericsson U300/U330/U335/U365 Feature Selections"
@@ -48,39 +51,12 @@ config MACH_U300_BS365
endchoice
-choice
- prompt "Memory configuration"
- default MACH_U300_SINGLE_RAM
- ---help---
- You have to config the kernel according to the physical memory
- configuration.
-
-config MACH_U300_SINGLE_RAM
- bool "Single RAM"
- help
- Select this if you want support for Single RAM phones.
-
-config MACH_U300_DUAL_RAM
- bool "Dual RAM"
- help
- Select this if you want support for Dual RAM phones.
- This is two RAM memories on different EMIFs.
-endchoice
-
config U300_DEBUG
bool "Debug support for U300"
depends on PM
help
Debug support for U300 in sysfs, procfs etc.
-config MACH_U300_SEMI_IS_SHARED
- bool "The SEMI is used by both the access and application side"
- depends on MACH_U300
- help
- This makes it possible to use the SEMI (Shared External
- Memory Interface) from both from access and application
- side.
-
config MACH_U300_SPIDUMMY
bool "SSP/SPI dummy chip"
select SPI
@@ -93,25 +69,6 @@ config MACH_U300_SPIDUMMY
you don't need it. Selecting this will activate the
SPI framework and ARM PL022 support.
-comment "All the settings below must match the bootloader's settings"
-
-config MACH_U300_ACCESS_MEM_SIZE
- int "Access CPU memory allocation"
- range 7 25
- depends on MACH_U300_SINGLE_RAM
- default 13
- help
- How much memory in MiB that the Access side CPU has allocated
-
-config MACH_U300_2MB_ALIGNMENT_FIX
- bool "2MiB alignment fix"
- depends on MACH_U300_SINGLE_RAM
- default y
- help
- If yes and the Access side CPU has allocated an odd size in
- MiB, this fix gives you one MiB extra that would otherwise be
- lost due to Linux 2 MiB alignment policy.
-
endmenu
endif
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 8fd354a..2855381 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -2,7 +2,7 @@
# Makefile for the linux kernel, U300 machine.
#
-obj-y := core.o clock.o timer.o padmux.o
+obj-y := core.o clock.o timer.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-u300/Makefile.boot b/arch/arm/mach-u300/Makefile.boot
index 6fbfc6e..87811de 100644
--- a/arch/arm/mach-u300/Makefile.boot
+++ b/arch/arm/mach-u300/Makefile.boot
@@ -1,15 +1,4 @@
-# Note: the following conditions must always be true:
-# ZRELADDR == virt_to_phys(TEXTADDR)
-# PARAMS_PHYS must be within 4MB of ZRELADDR
-# INITRD_PHYS must be in RAM
-
-ifdef CONFIG_MACH_U300_SINGLE_RAM
- zreladdr-y := 0x28E08000
- params_phys-y := 0x28E00100
-else
- zreladdr-y := 0x48008000
- params_phys-y := 0x48000100
-endif
-
+ zreladdr-y += 0x48008000
+params_phys-y := 0x48000100
# This isn't used.
-#initrd_phys-y := 0x29800000
+#initrd_phys-y := 0x48800000
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 513d6ab..ac0791e 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -25,6 +25,9 @@
#include <linux/err.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/fsmc.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/dma-mapping.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -37,6 +40,7 @@
#include <mach/hardware.h>
#include <mach/syscon.h>
#include <mach/dma_channels.h>
+#include <mach/gpio-u300.h>
#include "clock.h"
#include "mmc.h"
@@ -68,30 +72,13 @@ static struct map_desc u300_io_desc[] __initdata = {
.length = SZ_32K,
.type = MT_DEVICE,
},
- {
- .virtual = 0xffff2000, /* TCM memory */
- .pfn = __phys_to_pfn(0xffff2000),
- .length = SZ_16K,
- .type = MT_DEVICE,
- },
-
- /*
- * This overlaps with the IRQ vectors etc at 0xffff0000, so these
- * may have to be moved to 0x00000000 in order to use the ROM.
- */
- /*
- {
- .virtual = U300_BOOTROM_VIRT_BASE,
- .pfn = __phys_to_pfn(U300_BOOTROM_PHYS_BASE),
- .length = SZ_64K,
- .type = MT_ROM,
- },
- */
};
void __init u300_map_io(void)
{
iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
+ /* We enable a real big DMA buffer if need be. */
+ init_consistent_dma_size(SZ_4M);
}
/*
@@ -239,7 +226,7 @@ static struct resource gpio_resources[] = {
.end = IRQ_U300_GPIO_PORT2,
.flags = IORESOURCE_IRQ,
},
-#ifdef U300_COH901571_3
+#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
{
.name = "gpio3",
.start = IRQ_U300_GPIO_PORT3,
@@ -252,6 +239,7 @@ static struct resource gpio_resources[] = {
.end = IRQ_U300_GPIO_PORT4,
.flags = IORESOURCE_IRQ,
},
+#endif
#ifdef CONFIG_MACH_U300_BS335
{
.name = "gpio5",
@@ -266,7 +254,6 @@ static struct resource gpio_resources[] = {
.flags = IORESOURCE_IRQ,
},
#endif /* CONFIG_MACH_U300_BS335 */
-#endif /* U300_COH901571_3 */
};
static struct resource keypad_resources[] = {
@@ -361,51 +348,6 @@ static struct resource wdog_resources[] = {
}
};
-/* TODO: These should be protected by suitable #ifdef's */
-static struct resource ave_resources[] = {
- {
- .name = "AVE3e I/O Area",
- .start = U300_VIDEOENC_BASE,
- .end = U300_VIDEOENC_BASE + SZ_512K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "AVE3e IRQ0",
- .start = IRQ_U300_VIDEO_ENC_0,
- .end = IRQ_U300_VIDEO_ENC_0,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "AVE3e IRQ1",
- .start = IRQ_U300_VIDEO_ENC_1,
- .end = IRQ_U300_VIDEO_ENC_1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "AVE3e Physmem Area",
- .start = 0, /* 0 will be remapped to reserved memory */
- .end = SZ_1M - 1,
- .flags = IORESOURCE_MEM,
- },
- /*
- * The AVE3e requires two regions of 256MB that it considers
- * "invisible". The hardware will not be able to access these
- * addresses, so they should never point to system RAM.
- */
- {
- .name = "AVE3e Reserved 0",
- .start = 0xd0000000,
- .end = 0xd0000000 + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "AVE3e Reserved 1",
- .start = 0xe0000000,
- .end = 0xe0000000 + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
static struct resource dma_resource[] = {
{
.start = U300_DMAC_BASE,
@@ -1535,6 +1477,14 @@ static struct coh901318_platform coh901318_platform = {
.max_channels = U300_DMA_CHANNELS,
};
+static struct resource pinmux_resources[] = {
+ {
+ .start = U300_SYSCON_BASE,
+ .end = U300_SYSCON_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct platform_device wdog_device = {
.name = "coh901327_wdog",
.id = -1,
@@ -1556,11 +1506,35 @@ static struct platform_device i2c1_device = {
.resource = i2c1_resources,
};
+/*
+ * The different variants have a few different versions of the
+ * GPIO block, with different number of ports.
+ */
+static struct u300_gpio_platform u300_gpio_plat = {
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+ .variant = U300_GPIO_COH901335,
+ .ports = 3,
+#endif
+#ifdef CONFIG_MACH_U300_BS335
+ .variant = U300_GPIO_COH901571_3_BS335,
+ .ports = 7,
+#endif
+#ifdef CONFIG_MACH_U300_BS365
+ .variant = U300_GPIO_COH901571_3_BS365,
+ .ports = 5,
+#endif
+ .gpio_base = 0,
+ .gpio_irq_base = IRQ_U300_GPIO_BASE,
+};
+
static struct platform_device gpio_device = {
.name = "u300-gpio",
.id = -1,
.num_resources = ARRAY_SIZE(gpio_resources),
.resource = gpio_resources,
+ .dev = {
+ .platform_data = &u300_gpio_plat,
+ },
};
static struct platform_device keypad_device = {
@@ -1612,13 +1586,6 @@ static struct platform_device nand_device = {
},
};
-static struct platform_device ave_device = {
- .name = "video_enc",
- .id = -1,
- .num_resources = ARRAY_SIZE(ave_resources),
- .resource = ave_resources,
-};
-
static struct platform_device dma_device = {
.name = "coh901318",
.id = -1,
@@ -1630,6 +1597,72 @@ static struct platform_device dma_device = {
},
};
+static struct platform_device pinmux_device = {
+ .name = "pinmux-u300",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pinmux_resources),
+ .resource = pinmux_resources,
+};
+
+/* Pinmux settings */
+static struct pinmux_map u300_pinmux_map[] = {
+ /* anonymous maps for chip power and EMIFs */
+ PINMUX_MAP_PRIMARY_SYS_HOG("POWER", "power"),
+ PINMUX_MAP_PRIMARY_SYS_HOG("EMIF0", "emif0"),
+ PINMUX_MAP_PRIMARY_SYS_HOG("EMIF1", "emif1"),
+ /* per-device maps for MMC/SD, SPI and UART */
+ PINMUX_MAP_PRIMARY("MMCSD", "mmc0", "mmci"),
+ PINMUX_MAP_PRIMARY("SPI", "spi0", "pl022"),
+ PINMUX_MAP_PRIMARY("UART0", "uart0", "uart0"),
+};
+
+struct u300_mux_hog {
+ const char *name;
+ struct device *dev;
+ struct pinmux *pmx;
+};
+
+static struct u300_mux_hog u300_mux_hogs[] = {
+ {
+ .name = "uart0",
+ .dev = &uart0_device.dev,
+ },
+ {
+ .name = "spi0",
+ .dev = &pl022_device.dev,
+ },
+ {
+ .name = "mmc0",
+ .dev = &mmcsd_device.dev,
+ },
+};
+
+static int __init u300_pinmux_fetch(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(u300_mux_hogs); i++) {
+ struct pinmux *pmx;
+ int ret;
+
+ pmx = pinmux_get(u300_mux_hogs[i].dev, NULL);
+ if (IS_ERR(pmx)) {
+ pr_err("u300: could not get pinmux hog %s\n",
+ u300_mux_hogs[i].name);
+ continue;
+ }
+ ret = pinmux_enable(pmx);
+ if (ret) {
+ pr_err("u300: could enable pinmux hog %s\n",
+ u300_mux_hogs[i].name);
+ continue;
+ }
+ u300_mux_hogs[i].pmx = pmx;
+ }
+ return 0;
+}
+subsys_initcall(u300_pinmux_fetch);
+
/*
* Notice that AMBA devices are initialized before platform devices.
*
@@ -1643,10 +1676,9 @@ static struct platform_device *platform_devs[] __initdata = {
&gpio_device,
&nand_device,
&wdog_device,
- &ave_device
+ &pinmux_device,
};
-
/*
* Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected
* together so some interrupts are connected to the first one and some
@@ -1666,7 +1698,7 @@ void __init u300_init_irq(void)
BUG_ON(IS_ERR(clk));
clk_enable(clk);
- for (i = 0; i < NR_IRQS; i++)
+ for (i = 0; i < U300_VIC_IRQS_END; i++)
set_bit(i, (unsigned long *) &mask[0]);
vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
@@ -1791,7 +1823,7 @@ static void __init u300_assign_physmem(void)
0 == res->start) {
res->start = curr_start;
res->end += curr_start;
- curr_start += (res->end - res->start + 1);
+ curr_start += resource_size(res);
printk(KERN_INFO "core.c: Mapping RAM " \
"%#x-%#x to device %s:%s\n",
@@ -1828,6 +1860,10 @@ void __init u300_init_devices(void)
u300_assign_physmem();
+ /* Initialize pinmuxing */
+ pinmux_register_mappings(u300_pinmux_map,
+ ARRAY_SIZE(u300_pinmux_map));
+
/* Register subdevices on the I2C buses */
u300_i2c_register_board_devices();
@@ -1837,17 +1873,10 @@ void __init u300_init_devices(void)
/* Register subdevices on the SPI bus */
u300_spi_register_board_devices();
-#ifndef CONFIG_MACH_U300_SEMI_IS_SHARED
- /*
- * Enable SEMI self refresh. Self-refresh of the SDRAM is entered when
- * both subsystems are requesting this mode.
- * If we not share the Acc SDRAM, this is never the case. Therefore
- * enable it here from the App side.
- */
+ /* Enable SEMI self refresh */
val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) |
U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR);
-#endif /* CONFIG_MACH_U300_SEMI_IS_SHARED */
}
static int core_module_init(void)
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index f0394ba..5140dee 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -256,57 +256,8 @@ static struct ab3100_platform_data ab3100_plf_data = {
};
#endif
-#ifdef CONFIG_AB3550_CORE
-static struct abx500_init_settings ab3550_init_settings[] = {
- {
- .bank = 0,
- .reg = AB3550_IMR1,
- .setting = 0xff
- },
- {
- .bank = 0,
- .reg = AB3550_IMR2,
- .setting = 0xff
- },
- {
- .bank = 0,
- .reg = AB3550_IMR3,
- .setting = 0xff
- },
- {
- .bank = 0,
- .reg = AB3550_IMR4,
- .setting = 0xff
- },
- {
- .bank = 0,
- .reg = AB3550_IMR5,
- /* The two most significant bits are not used */
- .setting = 0x3f
- },
-};
-
-static struct ab3550_platform_data ab3550_plf_data = {
- .irq = {
- .base = IRQ_AB3550_BASE,
- .count = (IRQ_AB3550_END - IRQ_AB3550_BASE + 1),
- },
- .dev_data = {
- },
- .init_settings = ab3550_init_settings,
- .init_settings_sz = ARRAY_SIZE(ab3550_init_settings),
-};
-#endif
-
static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
-#if defined(CONFIG_AB3550_CORE)
- {
- .type = "ab3550",
- .addr = 0x4A,
- .irq = IRQ_U300_IRQ0_EXT,
- .platform_data = &ab3550_plf_data,
- },
-#elif defined(CONFIG_AB3100_CORE)
+#ifdef CONFIG_AB3100_CORE
{
.type = "ab3100",
.addr = 0x48,
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index df71570..8ae8e4a 100644
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
*/
#include <mach/hardware.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
/* If we move the address using MMU, use this. */
ldr \rp, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
ldr \rv, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h
index d5a71ab..40a8c17 100644
--- a/arch/arm/mach-u300/include/mach/gpio.h
+++ b/arch/arm/mach-u300/include/mach/gpio.h
@@ -1,294 +1 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/gpio.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * GPIO block resgister definitions and inline macros for
- * U300 GPIO COH 901 335 or COH 901 571/3
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __MACH_U300_GPIO_H
-#define __MACH_U300_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-/* Switch type depending on platform/chip variant */
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_COH901335
-#endif
-#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
-#define U300_COH901571_3
-#endif
-
-/* Get base address for regs here */
-#include "u300-regs.h"
-/* IRQ numbers */
-#include "irqs.h"
-
-/*
- * This is the GPIO block definitions. GPIO (General Purpose I/O) can be
- * used for anything, and often is. The event/enable etc figures are for
- * the lowermost pin (pin 0 on each port), shift this left to match your
- * pin if you're gonna use these values.
- */
-#ifdef U300_COH901335
-#define U300_GPIO_PORTX_SPACING (0x1C)
-/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
-#define U300_GPIO_PXPDIR (0x00)
-#define U300_GPIO_PXPDOR (0x00)
-/* Port X Pin Config Register 32bit (R/W) */
-#define U300_GPIO_PXPCR (0x04)
-#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
-#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
-#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
-/* Port X Interrupt Event Register 32bit (R/W) */
-#define U300_GPIO_PXIEV (0x08)
-#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL)
-/* Port X Interrupt Enable Register 32bit (R/W) */
-#define U300_GPIO_PXIEN (0x0C)
-#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL)
-/* Port X Interrupt Force Register 32bit (R/W) */
-#define U300_GPIO_PXIFR (0x10)
-#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL)
-/* Port X Interrupt Config Register 32bit (R/W) */
-#define U300_GPIO_PXICR (0x14)
-#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
-/* Port X Pull-up Enable Register 32bit (R/W) */
-#define U300_GPIO_PXPER (0x18)
-#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
-/* Control Register 32bit (R/W) */
-#define U300_GPIO_CR (0x54)
-#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE (0x00000001UL)
-/* three ports of 8 bits each = GPIO pins 0..23 */
-#define U300_GPIO_NUM_PORTS 3
-#define U300_GPIO_PINS_PER_PORT 8
-#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
-#endif
-
-#ifdef U300_COH901571_3
-/*
- * Control Register 32bit (R/W)
- * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
- * gives the number of GPIO pins.
- * bit 8-2 (mask 0x000001FC) contains the core version ID.
- */
-#define U300_GPIO_CR (0x00)
-#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL)
-#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
-#define U300_GPIO_PORTX_SPACING (0x30)
-/* Port X Pin Data INPUT Register 32bit (R/W) */
-#define U300_GPIO_PXPDIR (0x04)
-/* Port X Pin Data OUTPUT Register 32bit (R/W) */
-#define U300_GPIO_PXPDOR (0x08)
-/* Port X Pin Config Register 32bit (R/W) */
-#define U300_GPIO_PXPCR (0x0C)
-#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
-#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
-#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_INPUT (0x00000000UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
-/* Port X Pull-up Enable Register 32bit (R/W) */
-#define U300_GPIO_PXPER (0x10)
-#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
-/* Port X Interrupt Event Register 32bit (R/W) */
-#define U300_GPIO_PXIEV (0x14)
-#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEV_IRQ_EVENT (0x00000001UL)
-/* Port X Interrupt Enable Register 32bit (R/W) */
-#define U300_GPIO_PXIEN (0x18)
-#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIEN_IRQ_ENABLE (0x00000001UL)
-/* Port X Interrupt Force Register 32bit (R/W) */
-#define U300_GPIO_PXIFR (0x1C)
-#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK (0x000000FFUL)
-#define U300_GPIO_PXIFR_IRQ_FORCE (0x00000001UL)
-/* Port X Interrupt Config Register 32bit (R/W) */
-#define U300_GPIO_PXICR (0x20)
-#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
-#ifdef CONFIG_MACH_U300_BS335
-/* seven ports of 8 bits each = GPIO pins 0..55 */
-#define U300_GPIO_NUM_PORTS 7
-#else
-/* five ports of 8 bits each = GPIO pins 0..39 */
-#define U300_GPIO_NUM_PORTS 5
-#endif
-#define U300_GPIO_PINS_PER_PORT 8
-#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
-#endif
-
-/*
- * Individual pin assignments for the B26/S26. Notice that the
- * actual usage of these pins depends on the PAD MUX settings, that
- * is why the same number can potentially appear several times.
- * In the reference design each pin is only used for one purpose.
- * These were determined by inspecting the B26/S26 schematic:
- * 2/1911-ROA 128 1603
- */
-#ifdef CONFIG_MACH_U300_BS2X
-#define U300_GPIO_PIN_UART_RX 0
-#define U300_GPIO_PIN_UART_TX 1
-#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */
-#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */
-#define U300_GPIO_PIN_CAM_SLEEP 4
-#define U300_GPIO_PIN_CAM_REG_EN 5
-#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */
-#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */
-#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */
-#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */
-#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */
-#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */
-#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */
-#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */
-#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */
-#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */
-#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
-#endif
-
-/*
- * Individual pin assignments for the B330/S330 and B365/S365.
- * Notice that the actual usage of these pins depends on the
- * PAD MUX settings, that is why the same number can potentially
- * appear several times. In the reference design each pin is only
- * used for one purpose. These were determined by inspecting the
- * S365 schematic.
- */
-#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
- defined(CONFIG_MACH_U300_BS335)
-#define U300_GPIO_PIN_UART_RX 0
-#define U300_GPIO_PIN_UART_TX 1
-#define U300_GPIO_PIN_UART_CTS 2
-#define U300_GPIO_PIN_UART_RTS 3
-#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */
-#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */
-#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */
-#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */
-
-#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */
-#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */
-#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */
-#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */
-#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */
-#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */
-#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */
-#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */
-#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */
-#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */
-#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */
-#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */
-#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */
-#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */
-#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */
-#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */
-#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */
-#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */
-#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */
-#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */
-#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */
-#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */
-#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */
-#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */
-
-#ifdef CONFIG_MACH_U300_BS335
-
-#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */
-#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */
-#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */
-#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */
-#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */
-#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */
-#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */
-#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */
-#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */
-#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */
-#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */
-#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */
-#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */
-#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */
-#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */
-#endif
-
-#endif
-
-/* translates a pin number to a port number */
-#define PIN_TO_PORT(val) (val >> 3)
-
-/* These can be found in arch/arm/mach-u300/gpio.c */
-extern int gpio_is_valid(int number);
-extern int gpio_request(unsigned gpio, const char *label);
-extern void gpio_free(unsigned gpio);
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-extern int gpio_register_callback(unsigned gpio,
- int (*func)(void *arg),
- void *);
-extern int gpio_unregister_callback(unsigned gpio);
-extern void enable_irq_on_gpio_pin(unsigned gpio, int edge);
-extern void disable_irq_on_gpio_pin(unsigned gpio);
-extern void gpio_pullup(unsigned gpio, int value);
-extern int gpio_get_value(unsigned gpio);
-extern void gpio_set_value(unsigned gpio, int value);
-
-#define gpio_get_value_cansleep gpio_get_value
-#define gpio_set_value_cansleep gpio_set_value
-
-/* wrappers to sleep-enable the previous two functions */
-static inline unsigned gpio_to_irq(unsigned gpio)
-{
- return PIN_TO_PORT(gpio) + IRQ_U300_GPIO_PORT0;
-}
-
-static inline unsigned irq_to_gpio(unsigned irq)
-{
- /*
- * FIXME: This is no 1-1 mapping at all, it points to the
- * whole block of 8 pins.
- */
- return (irq - IRQ_U300_GPIO_PORT0) << 3;
-}
-
-#endif
+/* empty */
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index 09b1b28..db3fbfa 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -72,7 +72,7 @@
/* DB3150 and DB3200 have only 45 IRQs */
#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_NR_IRQS 45
+#define U300_VIC_IRQS_END 45
#endif
/* The DB3350-specific interrupt lines */
@@ -88,7 +88,7 @@
#define IRQ_U300_GPIO_PORT4 53
#define IRQ_U300_GPIO_PORT5 54
#define IRQ_U300_GPIO_PORT6 55
-#define U300_NR_IRQS 56
+#define U300_VIC_IRQS_END 56
#endif
/* The DB3210-specific interrupt lines */
@@ -106,16 +106,17 @@
#define IRQ_U300_NFIF 45
#define IRQ_U300_NFIF2 46
#define IRQ_U300_SYSCON_PLL_LOCK 47
-#define U300_NR_IRQS 48
+#define U300_VIC_IRQS_END 48
#endif
-#ifdef CONFIG_AB3550_CORE
-#define IRQ_AB3550_BASE (U300_NR_IRQS)
-#define IRQ_AB3550_END (IRQ_AB3550_BASE + 37)
-
-#define NR_IRQS (IRQ_AB3550_END + 1)
+/* Maximum 8*7 GPIO lines */
+#ifdef CONFIG_GPIO_U300
+#define IRQ_U300_GPIO_BASE (U300_VIC_IRQS_END)
+#define IRQ_U300_GPIO_END (IRQ_U300_GPIO_BASE + 56)
#else
-#define NR_IRQS U300_NR_IRQS
+#define IRQ_U300_GPIO_END (U300_VIC_IRQS_END)
#endif
+#define NR_IRQS (IRQ_U300_GPIO_END)
+
#endif
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
index 888e2e3..c808f34 100644
--- a/arch/arm/mach-u300/include/mach/memory.h
+++ b/arch/arm/mach-u300/include/mach/memory.h
@@ -13,30 +13,7 @@
#ifndef __MACH_MEMORY_H
#define __MACH_MEMORY_H
-#ifdef CONFIG_MACH_U300_DUAL_RAM
-
-#define PLAT_PHYS_OFFSET UL(0x48000000)
-#define BOOT_PARAMS_OFFSET (PHYS_OFFSET + 0x100)
-
-#else
-
-#ifdef CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
-#define PLAT_PHYS_OFFSET (0x28000000 + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE - \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
-#else
-#define PLAT_PHYS_OFFSET (0x28000000 + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
-#endif
-#define BOOT_PARAMS_OFFSET (0x28000000 + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100)
-#endif
-
-/*
- * We enable a real big DMA buffer if need be.
- */
-#define CONSISTENT_DMA_SIZE SZ_4M
+#define PLAT_PHYS_OFFSET UL(0x48000000)
+#define BOOT_PARAMS_OFFSET 0x100
#endif
diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h
index 7444f5c..6e84f07 100644
--- a/arch/arm/mach-u300/include/mach/syscon.h
+++ b/arch/arm/mach-u300/include/mach/syscon.h
@@ -234,91 +234,6 @@
#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE (0x0004)
#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE (0x0002)
#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE (0x0001)
-/* PAD MUX Control register 1 (LOW) 16bit (R/W) */
-#define U300_SYSCON_PMC1LR (0x007C)
-#define U300_SYSCON_PMC1LR_MASK (0xFFFF)
-#define U300_SYSCON_PMC1LR_CDI_MASK (0xC000)
-#define U300_SYSCON_PMC1LR_CDI_CDI (0x0000)
-#define U300_SYSCON_PMC1LR_CDI_EMIF (0x4000)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_PMC1LR_CDI_CDI2 (0x8000)
-#define U300_SYSCON_PMC1LR_CDI_WCDMA_APP_GPIO (0xC000)
-#elif CONFIG_MACH_U300_BS365
-#define U300_SYSCON_PMC1LR_CDI_GPIO (0x8000)
-#define U300_SYSCON_PMC1LR_CDI_WCDMA (0xC000)
-#endif
-#define U300_SYSCON_PMC1LR_PDI_MASK (0x3000)
-#define U300_SYSCON_PMC1LR_PDI_PDI (0x0000)
-#define U300_SYSCON_PMC1LR_PDI_EGG (0x1000)
-#define U300_SYSCON_PMC1LR_PDI_WCDMA (0x3000)
-#define U300_SYSCON_PMC1LR_MMCSD_MASK (0x0C00)
-#define U300_SYSCON_PMC1LR_MMCSD_MMCSD (0x0000)
-#define U300_SYSCON_PMC1LR_MMCSD_MSPRO (0x0400)
-#define U300_SYSCON_PMC1LR_MMCSD_DSP (0x0800)
-#define U300_SYSCON_PMC1LR_MMCSD_WCDMA (0x0C00)
-#define U300_SYSCON_PMC1LR_ETM_MASK (0x0300)
-#define U300_SYSCON_PMC1LR_ETM_ACC (0x0000)
-#define U300_SYSCON_PMC1LR_ETM_APP (0x0100)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS2_MASK (0x00C0)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC (0x0000)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS2_NFIF (0x0040)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS2_SDRAM (0x0080)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS2_STATIC_2GB (0x00C0)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS1_MASK (0x0030)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS1_STATIC (0x0000)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS1_NFIF (0x0010)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SDRAM (0x0020)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS1_SEMI (0x0030)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS0_MASK (0x000C)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS0_STATIC (0x0000)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS0_NFIF (0x0004)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SDRAM (0x0008)
-#define U300_SYSCON_PMC1LR_EMIF_1_CS0_SEMI (0x000C)
-#define U300_SYSCON_PMC1LR_EMIF_1_MASK (0x0003)
-#define U300_SYSCON_PMC1LR_EMIF_1_STATIC (0x0000)
-#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM0 (0x0001)
-#define U300_SYSCON_PMC1LR_EMIF_1_SDRAM1 (0x0002)
-#define U300_SYSCON_PMC1LR_EMIF_1 (0x0003)
-/* PAD MUX Control register 2 (HIGH) 16bit (R/W) */
-#define U300_SYSCON_PMC1HR (0x007E)
-#define U300_SYSCON_PMC1HR_MASK (0xFFFF)
-#define U300_SYSCON_PMC1HR_MISC_2_MASK (0xC000)
-#define U300_SYSCON_PMC1HR_MISC_2_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC1HR_MISC_2_MSPRO (0x4000)
-#define U300_SYSCON_PMC1HR_MISC_2_DSP (0x8000)
-#define U300_SYSCON_PMC1HR_MISC_2_AAIF (0xC000)
-#define U300_SYSCON_PMC1HR_APP_GPIO_2_MASK (0x3000)
-#define U300_SYSCON_PMC1HR_APP_GPIO_2_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC1HR_APP_GPIO_2_NFIF (0x1000)
-#define U300_SYSCON_PMC1HR_APP_GPIO_2_DSP (0x2000)
-#define U300_SYSCON_PMC1HR_APP_GPIO_2_AAIF (0x3000)
-#define U300_SYSCON_PMC1HR_APP_GPIO_1_MASK (0x0C00)
-#define U300_SYSCON_PMC1HR_APP_GPIO_1_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC1HR_APP_GPIO_1_MMC (0x0400)
-#define U300_SYSCON_PMC1HR_APP_GPIO_1_DSP (0x0800)
-#define U300_SYSCON_PMC1HR_APP_GPIO_1_AAIF (0x0C00)
-#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK (0x0300)
-#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI (0x0100)
-#define U300_SYSCON_PMC1HR_APP_SPI_CS_2_AAIF (0x0300)
-#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK (0x00C0)
-#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI (0x0040)
-#define U300_SYSCON_PMC1HR_APP_SPI_CS_1_AAIF (0x00C0)
-#define U300_SYSCON_PMC1HR_APP_SPI_2_MASK (0x0030)
-#define U300_SYSCON_PMC1HR_APP_SPI_2_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC1HR_APP_SPI_2_SPI (0x0010)
-#define U300_SYSCON_PMC1HR_APP_SPI_2_DSP (0x0020)
-#define U300_SYSCON_PMC1HR_APP_SPI_2_AAIF (0x0030)
-#define U300_SYSCON_PMC1HR_APP_UART0_2_MASK (0x000C)
-#define U300_SYSCON_PMC1HR_APP_UART0_2_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC1HR_APP_UART0_2_UART0 (0x0004)
-#define U300_SYSCON_PMC1HR_APP_UART0_2_NFIF_CS (0x0008)
-#define U300_SYSCON_PMC1HR_APP_UART0_2_AAIF (0x000C)
-#define U300_SYSCON_PMC1HR_APP_UART0_1_MASK (0x0003)
-#define U300_SYSCON_PMC1HR_APP_UART0_1_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC1HR_APP_UART0_1_UART0 (0x0001)
-#define U300_SYSCON_PMC1HR_APP_UART0_1_AAIF (0x0003)
/* Step one for killing the applications system 16bit (-/W) */
#define U300_SYSCON_KA1R (0x0080)
#define U300_SYSCON_KA1R_MASK (0xFFFF)
@@ -357,57 +272,6 @@
#define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE (0x0080)
#define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE (0x0040)
#define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK (0x003F)
-/* Padmux 2 control */
-#define U300_SYSCON_PMC2R (0x100)
-#define U300_SYSCON_PMC2R_APP_MISC_0_MASK (0x00C0)
-#define U300_SYSCON_PMC2R_APP_MISC_0_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC2R_APP_MISC_0_EMIF_SDRAM (0x0040)
-#define U300_SYSCON_PMC2R_APP_MISC_0_MMC (0x0080)
-#define U300_SYSCON_PMC2R_APP_MISC_0_CDI2 (0x00C0)
-#define U300_SYSCON_PMC2R_APP_MISC_1_MASK (0x0300)
-#define U300_SYSCON_PMC2R_APP_MISC_1_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC2R_APP_MISC_1_EMIF_SDRAM (0x0100)
-#define U300_SYSCON_PMC2R_APP_MISC_1_MMC (0x0200)
-#define U300_SYSCON_PMC2R_APP_MISC_1_CDI2 (0x0300)
-#define U300_SYSCON_PMC2R_APP_MISC_2_MASK (0x0C00)
-#define U300_SYSCON_PMC2R_APP_MISC_2_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC2R_APP_MISC_2_EMIF_SDRAM (0x0400)
-#define U300_SYSCON_PMC2R_APP_MISC_2_MMC (0x0800)
-#define U300_SYSCON_PMC2R_APP_MISC_2_CDI2 (0x0C00)
-#define U300_SYSCON_PMC2R_APP_MISC_3_MASK (0x3000)
-#define U300_SYSCON_PMC2R_APP_MISC_3_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC2R_APP_MISC_3_EMIF_SDRAM (0x1000)
-#define U300_SYSCON_PMC2R_APP_MISC_3_MMC (0x2000)
-#define U300_SYSCON_PMC2R_APP_MISC_3_CDI2 (0x3000)
-#define U300_SYSCON_PMC2R_APP_MISC_4_MASK (0xC000)
-#define U300_SYSCON_PMC2R_APP_MISC_4_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC2R_APP_MISC_4_EMIF_SDRAM (0x4000)
-#define U300_SYSCON_PMC2R_APP_MISC_4_MMC (0x8000)
-#define U300_SYSCON_PMC2R_APP_MISC_4_ACC_GPIO (0xC000)
-/* TODO: More SYSCON registers missing */
-#define U300_SYSCON_PMC3R (0x10c)
-#define U300_SYSCON_PMC3R_APP_MISC_11_MASK (0xc000)
-#define U300_SYSCON_PMC3R_APP_MISC_11_SPI (0x4000)
-#define U300_SYSCON_PMC3R_APP_MISC_10_MASK (0x3000)
-#define U300_SYSCON_PMC3R_APP_MISC_10_SPI (0x1000)
-/* TODO: Missing other configs */
-#define U300_SYSCON_PMC4R (0x168)
-#define U300_SYSCON_PMC4R_APP_MISC_12_MASK (0x0003)
-#define U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO (0x0000)
-#define U300_SYSCON_PMC4R_APP_MISC_13_MASK (0x000C)
-#define U300_SYSCON_PMC4R_APP_MISC_13_CDI (0x0000)
-#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA (0x0004)
-#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA2 (0x0008)
-#define U300_SYSCON_PMC4R_APP_MISC_13_APP_GPIO (0x000C)
-#define U300_SYSCON_PMC4R_APP_MISC_14_MASK (0x0030)
-#define U300_SYSCON_PMC4R_APP_MISC_14_CDI (0x0000)
-#define U300_SYSCON_PMC4R_APP_MISC_14_SMIA (0x0010)
-#define U300_SYSCON_PMC4R_APP_MISC_14_CDI2 (0x0020)
-#define U300_SYSCON_PMC4R_APP_MISC_14_APP_GPIO (0x0030)
-#define U300_SYSCON_PMC4R_APP_MISC_16_MASK (0x0300)
-#define U300_SYSCON_PMC4R_APP_MISC_16_APP_GPIO_13 (0x0000)
-#define U300_SYSCON_PMC4R_APP_MISC_16_APP_UART1_CTS (0x0100)
-#define U300_SYSCON_PMC4R_APP_MISC_16_EMIF_1_STATIC_CS5_N (0x0200)
/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
#define U300_SYSCON_S0CCR (0x120)
#define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF)
diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h
index 035fdc9..a8b71f2 100644
--- a/arch/arm/mach-u300/include/mach/u300-regs.h
+++ b/arch/arm/mach-u300/include/mach/u300-regs.h
@@ -102,7 +102,7 @@
#ifdef CONFIG_MACH_U300_BS335
/* Fast UART1 on U335 only */
-#define U300_UART1_BASE (U300_SLOW_PER_PHYS_BASE+0x7000)
+#define U300_UART1_BASE (U300_FAST_PER_PHYS_BASE+0x7000)
#endif
/*
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 677ccef..4d482aa 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -13,15 +13,14 @@
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/mmc/host.h>
-#include <linux/gpio.h>
#include <linux/dmaengine.h>
#include <linux/amba/mmci.h>
#include <linux/slab.h>
#include <mach/coh901318.h>
#include <mach/dma_channels.h>
+#include <mach/gpio-u300.h>
#include "mmc.h"
-#include "padmux.h"
static struct mmci_platform_data mmc0_plat_data = {
/*
@@ -45,24 +44,9 @@ static struct mmci_platform_data mmc0_plat_data = {
int __devinit mmc_init(struct amba_device *adev)
{
struct device *mmcsd_device = &adev->dev;
- struct pmx *pmx;
int ret = 0;
mmcsd_device->platform_data = &mmc0_plat_data;
- /*
- * Setup padmuxing for MMC. Since this must always be
- * compiled into the kernel, pmx is never released.
- */
- pmx = pmx_get(mmcsd_device, U300_APP_PMX_MMC_SETTING);
-
- if (IS_ERR(pmx))
- pr_warning("Could not get padmux handle\n");
- else {
- ret = pmx_activate(mmcsd_device, pmx);
- if (IS_ERR_VALUE(ret))
- pr_warning("Could not activate padmuxing\n");
- }
-
return ret;
}
diff --git a/arch/arm/mach-u300/padmux.c b/arch/arm/mach-u300/padmux.c
deleted file mode 100644
index 4c93c6c..0000000
--- a/arch/arm/mach-u300/padmux.c
+++ /dev/null
@@ -1,367 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/padmux.c
- *
- *
- * Copyright (C) 2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * U300 PADMUX functions
- * Author: Martin Persson <martin.persson@stericsson.com>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/mutex.h>
-#include <linux/string.h>
-#include <linux/bug.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <mach/u300-regs.h>
-#include <mach/syscon.h>
-#include "padmux.h"
-
-static DEFINE_MUTEX(pmx_mutex);
-
-const u32 pmx_registers[] = {
- (U300_SYSCON_VBASE + U300_SYSCON_PMC1LR),
- (U300_SYSCON_VBASE + U300_SYSCON_PMC1HR),
- (U300_SYSCON_VBASE + U300_SYSCON_PMC2R),
- (U300_SYSCON_VBASE + U300_SYSCON_PMC3R),
- (U300_SYSCON_VBASE + U300_SYSCON_PMC4R)
-};
-
-/* High level functionality */
-
-/* Lazy dog:
- * onmask = {
- * {"PMC1LR" mask, "PMC1LR" value},
- * {"PMC1HR" mask, "PMC1HR" value},
- * {"PMC2R" mask, "PMC2R" value},
- * {"PMC3R" mask, "PMC3R" value},
- * {"PMC4R" mask, "PMC4R" value}
- * }
- */
-static struct pmx mmc_setting = {
- .setting = U300_APP_PMX_MMC_SETTING,
- .default_on = false,
- .activated = false,
- .name = "MMC",
- .onmask = {
- {U300_SYSCON_PMC1LR_MMCSD_MASK,
- U300_SYSCON_PMC1LR_MMCSD_MMCSD},
- {0, 0},
- {0, 0},
- {0, 0},
- {U300_SYSCON_PMC4R_APP_MISC_12_MASK,
- U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO}
- },
-};
-
-static struct pmx spi_setting = {
- .setting = U300_APP_PMX_SPI_SETTING,
- .default_on = false,
- .activated = false,
- .name = "SPI",
- .onmask = {{0, 0},
- {U300_SYSCON_PMC1HR_APP_SPI_2_MASK |
- U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK |
- U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK,
- U300_SYSCON_PMC1HR_APP_SPI_2_SPI |
- U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI |
- U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI},
- {0, 0},
- {0, 0},
- {0, 0}
- },
-};
-
-/* Available padmux settings */
-static struct pmx *pmx_settings[] = {
- &mmc_setting,
- &spi_setting,
-};
-
-static void update_registers(struct pmx *pmx, bool activate)
-{
- u16 regval, val, mask;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(pmx_registers); i++) {
- if (activate)
- val = pmx->onmask[i].val;
- else
- val = 0;
-
- mask = pmx->onmask[i].mask;
- if (mask != 0) {
- regval = readw(pmx_registers[i]);
- regval &= ~mask;
- regval |= val;
- writew(regval, pmx_registers[i]);
- }
- }
-}
-
-struct pmx *pmx_get(struct device *dev, enum pmx_settings setting)
-{
- int i;
- struct pmx *pmx = ERR_PTR(-ENOENT);
-
- if (dev == NULL)
- return ERR_PTR(-EINVAL);
-
- mutex_lock(&pmx_mutex);
- for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
-
- if (setting == pmx_settings[i]->setting) {
-
- if (pmx_settings[i]->dev != NULL) {
- WARN(1, "padmux: required setting "
- "in use by another consumer\n");
- } else {
- pmx = pmx_settings[i];
- pmx->dev = dev;
- dev_dbg(dev, "padmux: setting nr %d is now "
- "bound to %s and ready to use\n",
- setting, dev_name(dev));
- break;
- }
- }
- }
- mutex_unlock(&pmx_mutex);
-
- return pmx;
-}
-EXPORT_SYMBOL(pmx_get);
-
-int pmx_put(struct device *dev, struct pmx *pmx)
-{
- int i;
- int ret = -ENOENT;
-
- if (pmx == NULL || dev == NULL)
- return -EINVAL;
-
- mutex_lock(&pmx_mutex);
- for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
-
- if (pmx->setting == pmx_settings[i]->setting) {
-
- if (dev != pmx->dev) {
- WARN(1, "padmux: cannot release handle as "
- "it is bound to another consumer\n");
- ret = -EINVAL;
- break;
- } else {
- pmx_settings[i]->dev = NULL;
- ret = 0;
- break;
- }
- }
- }
- mutex_unlock(&pmx_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL(pmx_put);
-
-int pmx_activate(struct device *dev, struct pmx *pmx)
-{
- int i, j, ret;
- ret = 0;
-
- if (pmx == NULL || dev == NULL)
- return -EINVAL;
-
- mutex_lock(&pmx_mutex);
-
- /* Make sure the required bits are not used */
- for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
-
- if (pmx_settings[i]->dev == NULL || pmx_settings[i] == pmx)
- continue;
-
- for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) {
-
- if (pmx_settings[i]->onmask[j].mask & pmx->
- onmask[j].mask) {
- /* More than one entry on the same bits */
- WARN(1, "padmux: cannot activate "
- "setting. Bit conflict with "
- "an active setting\n");
-
- ret = -EUSERS;
- goto exit;
- }
- }
- }
- update_registers(pmx, true);
- pmx->activated = true;
- dev_dbg(dev, "padmux: setting nr %d is activated\n",
- pmx->setting);
-
-exit:
- mutex_unlock(&pmx_mutex);
- return ret;
-}
-EXPORT_SYMBOL(pmx_activate);
-
-int pmx_deactivate(struct device *dev, struct pmx *pmx)
-{
- int i;
- int ret = -ENOENT;
-
- if (pmx == NULL || dev == NULL)
- return -EINVAL;
-
- mutex_lock(&pmx_mutex);
- for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
-
- if (pmx_settings[i]->dev == NULL)
- continue;
-
- if (pmx->setting == pmx_settings[i]->setting) {
-
- if (dev != pmx->dev) {
- WARN(1, "padmux: cannot deactivate "
- "pmx setting as it was activated "
- "by another consumer\n");
-
- ret = -EBUSY;
- continue;
- } else {
- update_registers(pmx, false);
- pmx_settings[i]->dev = NULL;
- pmx->activated = false;
- ret = 0;
- dev_dbg(dev, "padmux: setting nr %d is deactivated",
- pmx->setting);
- break;
- }
- }
- }
- mutex_unlock(&pmx_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL(pmx_deactivate);
-
-/*
- * For internal use only. If it is to be exported,
- * it should be reentrant. Notice that pmx_activate
- * (i.e. runtime settings) always override default settings.
- */
-static int pmx_set_default(void)
-{
- /* Used to identify several entries on the same bits */
- u16 modbits[ARRAY_SIZE(pmx_registers)];
-
- int i, j;
-
- memset(modbits, 0, ARRAY_SIZE(pmx_registers) * sizeof(u16));
-
- for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
-
- if (!pmx_settings[i]->default_on)
- continue;
-
- for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) {
-
- /* Make sure there is only one entry on the same bits */
- if (modbits[j] & pmx_settings[i]->onmask[j].mask) {
- BUG();
- return -EUSERS;
- }
- modbits[j] |= pmx_settings[i]->onmask[j].mask;
- }
- update_registers(pmx_settings[i], true);
- }
- return 0;
-}
-
-#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
-static int pmx_show(struct seq_file *s, void *data)
-{
- int i;
- seq_printf(s, "-------------------------------------------------\n");
- seq_printf(s, "SETTING BOUND TO DEVICE STATE\n");
- seq_printf(s, "-------------------------------------------------\n");
- mutex_lock(&pmx_mutex);
- for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
- /* Format pmx and device name nicely */
- char cdp[33];
- int chars;
-
- chars = snprintf(&cdp[0], 17, "%s", pmx_settings[i]->name);
- while (chars < 16) {
- cdp[chars] = ' ';
- chars++;
- }
- chars = snprintf(&cdp[16], 17, "%s", pmx_settings[i]->dev ?
- dev_name(pmx_settings[i]->dev) : "N/A");
- while (chars < 16) {
- cdp[chars+16] = ' ';
- chars++;
- }
- cdp[32] = '\0';
-
- seq_printf(s,
- "%s\t%s\n",
- &cdp[0],
- pmx_settings[i]->activated ?
- "ACTIVATED" : "DEACTIVATED"
- );
-
- }
- mutex_unlock(&pmx_mutex);
- return 0;
-}
-
-static int pmx_open(struct inode *inode, struct file *file)
-{
- return single_open(file, pmx_show, NULL);
-}
-
-static const struct file_operations pmx_operations = {
- .owner = THIS_MODULE,
- .open = pmx_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int __init init_pmx_read_debugfs(void)
-{
- /* Expose a simple debugfs interface to view pmx settings */
- (void) debugfs_create_file("padmux", S_IFREG | S_IRUGO,
- NULL, NULL,
- &pmx_operations);
- return 0;
-}
-
-/*
- * This needs to come in after the core_initcall(),
- * because debugfs is not available until
- * the subsystems come up.
- */
-module_init(init_pmx_read_debugfs);
-#endif
-
-static int __init pmx_init(void)
-{
- int ret;
-
- ret = pmx_set_default();
-
- if (IS_ERR_VALUE(ret))
- pr_crit("padmux: default settings could not be set\n");
-
- return 0;
-}
-
-/* Should be initialized before consumers */
-core_initcall(pmx_init);
diff --git a/arch/arm/mach-u300/padmux.h b/arch/arm/mach-u300/padmux.h
deleted file mode 100644
index 6e8b860..0000000
--- a/arch/arm/mach-u300/padmux.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/padmux.h
- *
- *
- * Copyright (C) 2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * U300 PADMUX API
- * Author: Martin Persson <martin.persson@stericsson.com>
- */
-
-#ifndef __MACH_U300_PADMUX_H
-#define __MACH_U300_PADMUX_H
-
-enum pmx_settings {
- U300_APP_PMX_MMC_SETTING,
- U300_APP_PMX_SPI_SETTING
-};
-
-struct pmx_onmask {
- u16 mask; /* Mask bits */
- u16 val; /* Value when active */
-};
-
-struct pmx {
- struct device *dev;
- enum pmx_settings setting;
- char *name;
- bool activated;
- bool default_on;
- struct pmx_onmask onmask[];
-};
-
-struct pmx *pmx_get(struct device *dev, enum pmx_settings setting);
-int pmx_put(struct device *dev, struct pmx *pmx);
-int pmx_activate(struct device *dev, struct pmx *pmx);
-int pmx_deactivate(struct device *dev, struct pmx *pmx);
-
-#endif
diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c
index 5767208..a1affac 100644
--- a/arch/arm/mach-u300/spi.c
+++ b/arch/arm/mach-u300/spi.c
@@ -14,8 +14,6 @@
#include <mach/coh901318.h>
#include <mach/dma_channels.h>
-#include "padmux.h"
-
/*
* The following is for the actual devices on the SSP/SPI bus
*/
@@ -40,8 +38,8 @@ struct pl022_config_chip dummy_chip_info = {
.hierarchy = SSP_MASTER,
/* 0 = drive TX even as slave, 1 = do not drive TX as slave */
.slave_tx_disable = 0,
- .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
- .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
+ .rx_lev_trig = SSP_RX_4_OR_MORE_ELEM,
+ .tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC,
.ctrl_len = SSP_BITS_12,
.wait_state = SSP_MWIRE_WAIT_ZERO,
.duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
@@ -95,25 +93,7 @@ static struct pl022_ssp_controller ssp_platform_data = {
void __init u300_spi_init(struct amba_device *adev)
{
- struct pmx *pmx;
-
adev->dev.platform_data = &ssp_platform_data;
- /*
- * Setup padmuxing for SPI. Since this must always be
- * compiled into the kernel, pmx is never released.
- */
- pmx = pmx_get(&adev->dev, U300_APP_PMX_SPI_SETTING);
-
- if (IS_ERR(pmx))
- dev_warn(&adev->dev, "Could not get padmux handle\n");
- else {
- int ret;
-
- ret = pmx_activate(&adev->dev, pmx);
- if (IS_ERR_VALUE(ret))
- dev_warn(&adev->dev, "Could not activate padmuxing\n");
- }
-
}
void __init u300_spi_register_board_devices(void)
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 18d7fa0..5f51bde 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -27,9 +27,6 @@
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-/* Be able to sleep for atleast 4 seconds (usually more) */
-#define APPTIMER_MIN_RANGE 4
-
/*
* APP side special timer registers
* This timer contains four timers which can fire an interrupt each.
@@ -309,11 +306,11 @@ static int u300_set_next_event(unsigned long cycles,
/* Use general purpose timer 1 as clock event */
static struct clock_event_device clockevent_u300_1mhz = {
- .name = "GPT1",
- .rating = 300, /* Reasonably fast and accurate clock event */
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .set_next_event = u300_set_next_event,
- .set_mode = u300_set_mode,
+ .name = "GPT1",
+ .rating = 300, /* Reasonably fast and accurate clock event */
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = u300_set_next_event,
+ .set_mode = u300_set_mode,
};
/* Clock event timer interrupt handler */
@@ -328,9 +325,9 @@ static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
}
static struct irqaction u300_timer_irq = {
- .name = "U300 Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = u300_timer_interrupt,
+ .name = "U300 Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = u300_timer_interrupt,
};
/*
@@ -413,16 +410,10 @@ static void __init u300_timer_init(void)
"GPT2", rate, 300, 32, clocksource_mmio_readl_up))
pr_err("timer: failed to initialize U300 clock source\n");
- clockevents_calc_mult_shift(&clockevent_u300_1mhz,
- rate, APPTIMER_MIN_RANGE);
- /* 32bit counter, so 32bits delta is max */
- clockevent_u300_1mhz.max_delta_ns =
- clockevent_delta2ns(0xffffffff, &clockevent_u300_1mhz);
- /* This timer is slow enough to set for 1 cycle == 1 MHz */
- clockevent_u300_1mhz.min_delta_ns =
- clockevent_delta2ns(1, &clockevent_u300_1mhz);
- clockevent_u300_1mhz.cpumask = cpumask_of(0);
- clockevents_register_device(&clockevent_u300_1mhz);
+ /* Configure and register the clockevent */
+ clockevents_config_and_register(&clockevent_u300_1mhz, rate,
+ 1, 0xffffffff);
+
/*
* TODO: init and register the rest of the timers too, they can be
* used by hrtimers!
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
index 48b3b7f..89422ee 100644
--- a/arch/arm/mach-u300/u300.c
+++ b/arch/arm/mach-u300/u300.c
@@ -23,21 +23,6 @@
#include <asm/mach/arch.h>
#include <asm/memory.h>
-static void __init u300_reserve(void)
-{
- /*
- * U300 - This platform family can share physical memory
- * between two ARM cpus, one running Linux and the other
- * running another OS.
- */
-#ifdef CONFIG_MACH_U300_SINGLE_RAM
-#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) && \
- CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
- memblock_reserve(PHYS_OFFSET, 0x00100000);
-#endif
-#endif
-}
-
static void __init u300_init_machine(void)
{
u300_init_devices();
@@ -61,9 +46,8 @@ static void __init u300_init_machine(void)
MACHINE_START(U300, MACH_U300_STRING)
/* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
- .boot_params = BOOT_PARAMS_OFFSET,
+ .atag_offset = BOOT_PARAMS_OFFSET,
.map_io = u300_map_io,
- .reserve = u300_reserve,
.init_irq = u300_init_irq,
.timer = &u300_timer,
.init_machine = u300_init_machine,
generated by cgit v1.1 at 2024-04-29 06:08:57 +0000