aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-omap
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-omap')
-rw-r--r--arch/arm/plat-omap/Kconfig10
-rw-r--r--arch/arm/plat-omap/clock.c99
-rw-r--r--arch/arm/plat-omap/common.c11
-rw-r--r--arch/arm/plat-omap/counter_32k.c26
-rw-r--r--arch/arm/plat-omap/cpu-omap.c2
-rw-r--r--arch/arm/plat-omap/devices.c10
-rw-r--r--arch/arm/plat-omap/dma.c9
-rw-r--r--arch/arm/plat-omap/dmtimer.c4
-rw-r--r--arch/arm/plat-omap/i2c.c2
-rw-r--r--arch/arm/plat-omap/include/plat/board.h4
-rw-r--r--arch/arm/plat-omap/include/plat/clkdev_omap.h1
-rw-r--r--arch/arm/plat-omap/include/plat/clock.h28
-rw-r--r--arch/arm/plat-omap/include/plat/common.h8
-rw-r--r--arch/arm/plat-omap/include/plat/cpu.h44
-rw-r--r--arch/arm/plat-omap/include/plat/display.h26
-rw-r--r--arch/arm/plat-omap/include/plat/dmtimer.h11
-rw-r--r--arch/arm/plat-omap/include/plat/fpga.h92
-rw-r--r--arch/arm/plat-omap/include/plat/gpmc.h18
-rw-r--r--arch/arm/plat-omap/include/plat/hardware.h1
-rw-r--r--arch/arm/plat-omap/include/plat/io.h12
-rw-r--r--arch/arm/plat-omap/include/plat/iommu.h16
-rw-r--r--arch/arm/plat-omap/include/plat/iovmm.h2
-rw-r--r--arch/arm/plat-omap/include/plat/irqs.h11
-rw-r--r--arch/arm/plat-omap/include/plat/l3_2xxx.h20
-rw-r--r--arch/arm/plat-omap/include/plat/l3_3xxx.h20
-rw-r--r--arch/arm/plat-omap/include/plat/l4_2xxx.h24
-rw-r--r--arch/arm/plat-omap/include/plat/l4_3xxx.h10
-rw-r--r--arch/arm/plat-omap/include/plat/mcbsp.h64
-rw-r--r--arch/arm/plat-omap/include/plat/mcspi.h11
-rw-r--r--arch/arm/plat-omap/include/plat/memory.h4
-rw-r--r--arch/arm/plat-omap/include/plat/mmc.h29
-rw-r--r--arch/arm/plat-omap/include/plat/multi.h4
-rw-r--r--arch/arm/plat-omap/include/plat/nand.h11
-rw-r--r--arch/arm/plat-omap/include/plat/omap34xx.h16
-rw-r--r--arch/arm/plat-omap/include/plat/omap_hwmod.h25
-rw-r--r--arch/arm/plat-omap/include/plat/onenand.h10
-rw-r--r--arch/arm/plat-omap/include/plat/prcm.h1
-rw-r--r--arch/arm/plat-omap/include/plat/sdrc.h8
-rw-r--r--arch/arm/plat-omap/include/plat/serial.h11
-rw-r--r--arch/arm/plat-omap/include/plat/smartreflex.h245
-rw-r--r--arch/arm/plat-omap/include/plat/sram.h14
-rw-r--r--arch/arm/plat-omap/include/plat/system.h38
-rw-r--r--arch/arm/plat-omap/include/plat/ti816x.h27
-rw-r--r--arch/arm/plat-omap/include/plat/uncompress.h7
-rw-r--r--arch/arm/plat-omap/include/plat/usb.h59
-rw-r--r--arch/arm/plat-omap/include/plat/voltage.h155
-rw-r--r--arch/arm/plat-omap/io.c5
-rw-r--r--arch/arm/plat-omap/iommu.c69
-rw-r--r--arch/arm/plat-omap/iovmm.c27
-rw-r--r--arch/arm/plat-omap/mailbox.c21
-rw-r--r--arch/arm/plat-omap/mcbsp.c203
-rw-r--r--arch/arm/plat-omap/omap_device.c36
-rw-r--r--arch/arm/plat-omap/sram.c34
53 files changed, 845 insertions, 810 deletions
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 18fe3cb..cd5f993 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -54,7 +54,7 @@ config OMAP_SMARTREFLEX
user must write 1 to
/debug/voltage/vdd_<X>/smartreflex/autocomp,
where X is mpu or core for OMAP3.
- Optionallly autocompensation can be enabled in the kernel
+ Optionally autocompensation can be enabled in the kernel
by default during system init via the enable_on_init flag
which an be passed as platform data to the smartreflex driver.
@@ -144,12 +144,9 @@ config OMAP_IOMMU_DEBUG
config OMAP_IOMMU_IVA2
bool
-choice
- prompt "System timer"
- default OMAP_32K_TIMER if !ARCH_OMAP15XX
-
config OMAP_MPU_TIMER
bool "Use mpu timer"
+ depends on ARCH_OMAP1
help
Select this option if you want to use the OMAP mpu timer. This
timer provides more intra-tick resolution than the 32KHz timer,
@@ -158,6 +155,7 @@ config OMAP_MPU_TIMER
config OMAP_32K_TIMER
bool "Use 32KHz timer"
depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
+ default y if (ARCH_OMAP16XX || ARCH_OMAP2PLUS)
help
Select this option if you want to enable the OMAP 32KHz timer.
This timer saves power compared to the OMAP_MPU_TIMER, and has
@@ -165,8 +163,6 @@ config OMAP_32K_TIMER
intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
currently only available for OMAP16XX, 24XX, 34XX and OMAP4.
-endchoice
-
config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
depends on ARCH_OMAP3 && PM
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index fc62fb5..c9122dd 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -37,14 +37,16 @@ static struct clk_functions *arch_clock;
int clk_enable(struct clk *clk)
{
unsigned long flags;
- int ret = 0;
+ int ret;
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
+ if (!arch_clock || !arch_clock->clk_enable)
+ return -EINVAL;
+
spin_lock_irqsave(&clockfw_lock, flags);
- if (arch_clock->clk_enable)
- ret = arch_clock->clk_enable(clk);
+ ret = arch_clock->clk_enable(clk);
spin_unlock_irqrestore(&clockfw_lock, flags);
return ret;
@@ -58,6 +60,9 @@ void clk_disable(struct clk *clk)
if (clk == NULL || IS_ERR(clk))
return;
+ if (!arch_clock || !arch_clock->clk_disable)
+ return;
+
spin_lock_irqsave(&clockfw_lock, flags);
if (clk->usecount == 0) {
pr_err("Trying disable clock %s with 0 usecount\n",
@@ -66,8 +71,7 @@ void clk_disable(struct clk *clk)
goto out;
}
- if (arch_clock->clk_disable)
- arch_clock->clk_disable(clk);
+ arch_clock->clk_disable(clk);
out:
spin_unlock_irqrestore(&clockfw_lock, flags);
@@ -77,7 +81,7 @@ EXPORT_SYMBOL(clk_disable);
unsigned long clk_get_rate(struct clk *clk)
{
unsigned long flags;
- unsigned long ret = 0;
+ unsigned long ret;
if (clk == NULL || IS_ERR(clk))
return 0;
@@ -97,14 +101,16 @@ EXPORT_SYMBOL(clk_get_rate);
long clk_round_rate(struct clk *clk, unsigned long rate)
{
unsigned long flags;
- long ret = 0;
+ long ret;
if (clk == NULL || IS_ERR(clk))
- return ret;
+ return 0;
+
+ if (!arch_clock || !arch_clock->clk_round_rate)
+ return 0;
spin_lock_irqsave(&clockfw_lock, flags);
- if (arch_clock->clk_round_rate)
- ret = arch_clock->clk_round_rate(clk, rate);
+ ret = arch_clock->clk_round_rate(clk, rate);
spin_unlock_irqrestore(&clockfw_lock, flags);
return ret;
@@ -119,14 +125,13 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
if (clk == NULL || IS_ERR(clk))
return ret;
+ if (!arch_clock || !arch_clock->clk_set_rate)
+ return ret;
+
spin_lock_irqsave(&clockfw_lock, flags);
- if (arch_clock->clk_set_rate)
- ret = arch_clock->clk_set_rate(clk, rate);
- if (ret == 0) {
- if (clk->recalc)
- clk->rate = clk->recalc(clk);
+ ret = arch_clock->clk_set_rate(clk, rate);
+ if (ret == 0)
propagate_rate(clk);
- }
spin_unlock_irqrestore(&clockfw_lock, flags);
return ret;
@@ -141,15 +146,14 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
return ret;
+ if (!arch_clock || !arch_clock->clk_set_parent)
+ return ret;
+
spin_lock_irqsave(&clockfw_lock, flags);
if (clk->usecount == 0) {
- if (arch_clock->clk_set_parent)
- ret = arch_clock->clk_set_parent(clk, parent);
- if (ret == 0) {
- if (clk->recalc)
- clk->rate = clk->recalc(clk);
+ ret = arch_clock->clk_set_parent(clk, parent);
+ if (ret == 0)
propagate_rate(clk);
- }
} else
ret = -EBUSY;
spin_unlock_irqrestore(&clockfw_lock, flags);
@@ -335,6 +339,38 @@ struct clk *omap_clk_get_by_name(const char *name)
return ret;
}
+int omap_clk_enable_autoidle_all(void)
+{
+ struct clk *c;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+
+ list_for_each_entry(c, &clocks, node)
+ if (c->ops->allow_idle)
+ c->ops->allow_idle(c);
+
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+
+int omap_clk_disable_autoidle_all(void)
+{
+ struct clk *c;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+
+ list_for_each_entry(c, &clocks, node)
+ if (c->ops->deny_idle)
+ c->ops->deny_idle(c);
+
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+
/*
* Low level helpers
*/
@@ -367,9 +403,11 @@ void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
{
unsigned long flags;
+ if (!arch_clock || !arch_clock->clk_init_cpufreq_table)
+ return;
+
spin_lock_irqsave(&clockfw_lock, flags);
- if (arch_clock->clk_init_cpufreq_table)
- arch_clock->clk_init_cpufreq_table(table);
+ arch_clock->clk_init_cpufreq_table(table);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
@@ -377,9 +415,11 @@ void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
{
unsigned long flags;
+ if (!arch_clock || !arch_clock->clk_exit_cpufreq_table)
+ return;
+
spin_lock_irqsave(&clockfw_lock, flags);
- if (arch_clock->clk_exit_cpufreq_table)
- arch_clock->clk_exit_cpufreq_table(table);
+ arch_clock->clk_exit_cpufreq_table(table);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
#endif
@@ -397,6 +437,9 @@ static int __init clk_disable_unused(void)
struct clk *ck;
unsigned long flags;
+ if (!arch_clock || !arch_clock->clk_disable_unused)
+ return 0;
+
pr_info("clock: disabling unused clocks to save power\n");
list_for_each_entry(ck, &clocks, node) {
if (ck->ops == &clkops_null)
@@ -406,14 +449,14 @@ static int __init clk_disable_unused(void)
continue;
spin_lock_irqsave(&clockfw_lock, flags);
- if (arch_clock->clk_disable_unused)
- arch_clock->clk_disable_unused(ck);
+ arch_clock->clk_disable_unused(ck);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
return 0;
}
late_initcall(clk_disable_unused);
+late_initcall(omap_clk_enable_autoidle_all);
#endif
int __init clk_init(struct clk_functions * custom_clocks)
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index f047318..d9f10a3 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -24,10 +24,11 @@
#define NO_LENGTH_CHECK 0xffffffff
-struct omap_board_config_kernel *omap_board_config;
+struct omap_board_config_kernel *omap_board_config __initdata;
int omap_board_config_size;
-static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
+static const void *__init get_config(u16 tag, size_t len,
+ int skip, size_t *len_out)
{
struct omap_board_config_kernel *kinfo = NULL;
int i;
@@ -49,17 +50,15 @@ static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
return kinfo->data;
}
-const void *__omap_get_config(u16 tag, size_t len, int nr)
+const void *__init __omap_get_config(u16 tag, size_t len, int nr)
{
return get_config(tag, len, nr, NULL);
}
-EXPORT_SYMBOL(__omap_get_config);
-const void *omap_get_var_config(u16 tag, size_t *len)
+const void *__init omap_get_var_config(u16 tag, size_t *len)
{
return get_config(tag, NO_LENGTH_CHECK, 0, len);
}
-EXPORT_SYMBOL(omap_get_var_config);
void __init omap_reserve(void)
{
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index ea46440..f7fed60 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -36,8 +36,6 @@
#define OMAP16XX_TIMER_32K_SYNCHRONIZED 0xfffbc410
-#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX))
-
#include <linux/clocksource.h>
/*
@@ -56,7 +54,7 @@ static cycle_t notrace omap16xx_32k_read(struct clocksource *cs)
#define omap16xx_32k_read NULL
#endif
-#ifdef CONFIG_ARCH_OMAP2420
+#ifdef CONFIG_SOC_OMAP2420
static cycle_t notrace omap2420_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k;
@@ -65,7 +63,7 @@ static cycle_t notrace omap2420_32k_read(struct clocksource *cs)
#define omap2420_32k_read NULL
#endif
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
static cycle_t notrace omap2430_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k;
@@ -122,12 +120,24 @@ static DEFINE_CLOCK_DATA(cd);
#define SC_MULT 4000000000u
#define SC_SHIFT 17
-unsigned long long notrace sched_clock(void)
+static inline unsigned long long notrace _omap_32k_sched_clock(void)
{
u32 cyc = clocksource_32k.read(&clocksource_32k);
return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
}
+#ifndef CONFIG_OMAP_MPU_TIMER
+unsigned long long notrace sched_clock(void)
+{
+ return _omap_32k_sched_clock();
+}
+#else
+unsigned long long notrace omap_32k_sched_clock(void)
+{
+ return _omap_32k_sched_clock();
+}
+#endif
+
static void notrace omap_update_sched_clock(void)
{
u32 cyc = clocksource_32k.read(&clocksource_32k);
@@ -160,7 +170,7 @@ void read_persistent_clock(struct timespec *ts)
*ts = *tsp;
}
-static int __init omap_init_clocksource_32k(void)
+int __init omap_init_clocksource_32k(void)
{
static char err[] __initdata = KERN_ERR
"%s: can't register clocksource!\n";
@@ -195,7 +205,3 @@ static int __init omap_init_clocksource_32k(void)
}
return 0;
}
-arch_initcall(omap_init_clocksource_32k);
-
-#endif /* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */
-
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index 11c54ec..da4f68d 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -101,7 +101,7 @@ static int omap_target(struct cpufreq_policy *policy,
return ret;
}
-static int __init omap_cpu_init(struct cpufreq_policy *policy)
+static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy)
{
int result = 0;
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 10245b8..7d9f815 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -35,8 +35,8 @@
static struct platform_device **omap_mcbsp_devices;
-void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
- int size)
+void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
+ struct omap_mcbsp_platform_data *config, int size)
{
int i;
@@ -54,6 +54,8 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
if (!new_mcbsp)
continue;
+ platform_device_add_resources(new_mcbsp, &res[i * res_count],
+ res_count);
new_mcbsp->dev.platform_data = &config[i];
ret = platform_device_add(new_mcbsp);
if (ret) {
@@ -65,8 +67,8 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
}
#else
-void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
- int size)
+void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
+ struct omap_mcbsp_platform_data *config, int size)
{ }
#endif
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index c4b2b47..2ec3b5d 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -53,7 +53,7 @@ enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
#endif
#define OMAP_DMA_ACTIVE 0x01
-#define OMAP2_DMA_CSR_CLEAR_MASK 0xffe
+#define OMAP2_DMA_CSR_CLEAR_MASK 0xffffffff
#define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec)
@@ -134,7 +134,7 @@ static inline void omap_enable_channel_irq(int lch);
#ifdef CONFIG_ARCH_OMAP15XX
/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
-int omap_dma_in_1510_mode(void)
+static int omap_dma_in_1510_mode(void)
{
return enable_1510_mode;
}
@@ -1873,7 +1873,7 @@ static int omap2_dma_handle_ch(int ch)
printk(KERN_INFO "DMA misaligned error with device %d\n",
dma_chan[ch].dev_id);
- p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, ch);
+ p->dma_write(status, CSR, ch);
p->dma_write(1 << ch, IRQSTATUS_L0, ch);
/* read back the register to flush the write */
p->dma_read(IRQSTATUS_L0, ch);
@@ -1893,10 +1893,9 @@ static int omap2_dma_handle_ch(int ch)
OMAP_DMA_CHAIN_INCQHEAD(chain_id);
status = p->dma_read(CSR, ch);
+ p->dma_write(status, CSR, ch);
}
- p->dma_write(status, CSR, ch);
-
if (likely(dma_chan[ch].callback != NULL))
dma_chan[ch].callback(ch, status, dma_chan[ch].data);
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 1d706cf..ee9f6eb 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -342,6 +342,10 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer)
l |= 0x02 << 3; /* Set to smart-idle mode */
l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */
+ /* Enable autoidle on OMAP2 / OMAP3 */
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
+ l |= 0x1 << 0;
+
/*
* Enable wake-up on OMAP2 CPUs.
*/
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index a4f8003..3341ca4 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -112,6 +112,7 @@ static inline int omap1_i2c_add_bus(int bus_id)
}
+#ifdef CONFIG_ARCH_OMAP2PLUS
/*
* XXX This function is a temporary compatibility wrapper - only
* needed until the I2C driver can be converted to call
@@ -130,7 +131,6 @@ static struct omap_device_pm_latency omap_i2c_latency[] = {
},
};
-#ifdef CONFIG_ARCH_OMAP2PLUS
static inline int omap2_i2c_add_bus(int bus_id)
{
int l;
diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
index 3cf4fa2..97126df 100644
--- a/arch/arm/plat-omap/include/plat/board.h
+++ b/arch/arm/plat-omap/include/plat/board.h
@@ -151,14 +151,14 @@ struct omap_board_config_kernel {
const void *data;
};
-extern const void *__omap_get_config(u16 tag, size_t len, int nr);
+extern const void *__init __omap_get_config(u16 tag, size_t len, int nr);
#define omap_get_config(tag, type) \
((const type *) __omap_get_config((tag), sizeof(type), 0))
#define omap_get_nr_config(tag, type, nr) \
((const type *) __omap_get_config((tag), sizeof(type), (nr)))
-extern const void *omap_get_var_config(u16 tag, size_t *len);
+extern const void *__init omap_get_var_config(u16 tag, size_t *len);
extern struct omap_board_config_kernel *omap_board_config;
extern int omap_board_config_size;
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
index 256ab3f..f1899a3 100644
--- a/arch/arm/plat-omap/include/plat/clkdev_omap.h
+++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h
@@ -38,6 +38,7 @@ struct omap_clk {
#define CK_3517 (1 << 9)
#define CK_36XX (1 << 10) /* 36xx/37xx-specific clocks */
#define CK_443X (1 << 11)
+#define CK_TI816X (1 << 12)
#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS)
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 8eb0ada..006e599 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -25,6 +25,8 @@ struct clockdomain;
* @disable: fn ptr that enables the current clock in hardware
* @find_idlest: function returning the IDLEST register for the clock's IP blk
* @find_companion: function returning the "companion" clk reg for the clock
+ * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
+ * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
*
* A "companion" clk is an accompanying clock to the one being queried
* that must be enabled for the IP module connected to the clock to
@@ -42,6 +44,8 @@ struct clkops {
u8 *, u8 *);
void (*find_companion)(struct clk *, void __iomem **,
u8 *);
+ void (*allow_idle)(struct clk *);
+ void (*deny_idle)(struct clk *);
};
#ifdef CONFIG_ARCH_OMAP2PLUS
@@ -53,6 +57,7 @@ struct clkops {
#define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */
#define RATE_IN_36XX (1 << 4)
#define RATE_IN_4430 (1 << 5)
+#define RATE_IN_TI816X (1 << 6)
#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
@@ -104,7 +109,6 @@ struct clksel {
* @clk_ref: struct clk pointer to the clock's reference clock input
* @control_reg: register containing the DPLL mode bitfield
* @enable_mask: mask of the DPLL mode bitfield in @control_reg
- * @rate_tolerance: maximum variance allowed from target rate (in Hz)
* @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
* @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
* @max_multiplier: maximum valid non-bypass multiplier value (actual)
@@ -130,12 +134,9 @@ struct clksel {
* XXX Some DPLLs have multiple bypass inputs, so it's not technically
* correct to only have one @clk_bypass pointer.
*
- * XXX @rate_tolerance should probably be deprecated - currently there
- * don't seem to be any usecases for DPLL rounding that is not exact.
- *
* XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
* @last_rounded_n) should be separated from the runtime-fixed fields
- * and placed into a differenct structure, so that the runtime-fixed data
+ * and placed into a different structure, so that the runtime-fixed data
* can be placed into read-only space.
*/
struct dpll_data {
@@ -146,7 +147,6 @@ struct dpll_data {
struct clk *clk_ref;
void __iomem *control_reg;
u32 enable_mask;
- unsigned int rate_tolerance;
unsigned long last_rounded_rate;
u16 last_rounded_m;
u16 max_multiplier;
@@ -171,12 +171,24 @@ struct dpll_data {
#endif
-/* struct clk.flags possibilities */
+/*
+ * struct clk.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ * bits share the same register. This flag allows the
+ * omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ * should be used. This is a temporary solution - a better approach
+ * would be to associate clock type-specific data with the clock,
+ * similar to the struct dpll_data approach.
+ */
#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
#define CLOCK_IDLE_CONTROL (1 << 1)
#define CLOCK_NO_IDLE_PARENT (1 << 2)
#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2 (1 << 5)
/**
* struct clk - OMAP struct clk
@@ -292,6 +304,8 @@ extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
#endif
extern struct clk *omap_clk_get_by_name(const char *name);
+extern int omap_clk_enable_autoidle_all(void);
+extern int omap_clk_disable_autoidle_all(void);
extern const struct clkops clkops_null;
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 6b8088e..5288130 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -35,6 +35,9 @@ struct sys_timer;
extern void omap_map_common_io(void);
extern struct sys_timer omap_timer;
+extern bool omap_32k_timer_init(void);
+extern int __init omap_init_clocksource_32k(void);
+extern unsigned long long notrace omap_32k_sched_clock(void);
extern void omap_reserve(void);
@@ -53,16 +56,13 @@ struct omap_globals {
unsigned long prm; /* Power and Reset Management */
unsigned long cm; /* Clock Management */
unsigned long cm2;
- unsigned long uart1_phys;
- unsigned long uart2_phys;
- unsigned long uart3_phys;
- unsigned long uart4_phys;
};
void omap2_set_globals_242x(void);
void omap2_set_globals_243x(void);
void omap2_set_globals_3xxx(void);
void omap2_set_globals_443x(void);
+void omap2_set_globals_ti816x(void);
/* These get called from omap2_set_globals_xxxx(), do not call these */
void omap2_set_globals_tap(struct omap_globals *);
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 3fd8b40..8198bb6 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -5,7 +5,7 @@
*
* Copyright (C) 2004, 2008 Nokia Corporation
*
- * Copyright (C) 2009 Texas Instruments.
+ * Copyright (C) 2009-11 Texas Instruments.
*
* Written by Tony Lindgren <tony.lindgren@nokia.com>
*
@@ -105,6 +105,12 @@ static inline int is_omap ##subclass (void) \
return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
}
+#define IS_TI_SUBCLASS(subclass, id) \
+static inline int is_ti ##subclass (void) \
+{ \
+ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
+}
+
IS_OMAP_CLASS(7xx, 0x07)
IS_OMAP_CLASS(15xx, 0x15)
IS_OMAP_CLASS(16xx, 0x16)
@@ -118,6 +124,8 @@ IS_OMAP_SUBCLASS(343x, 0x343)
IS_OMAP_SUBCLASS(363x, 0x363)
IS_OMAP_SUBCLASS(443x, 0x443)
+IS_TI_SUBCLASS(816x, 0x816)
+
#define cpu_is_omap7xx() 0
#define cpu_is_omap15xx() 0
#define cpu_is_omap16xx() 0
@@ -126,6 +134,7 @@ IS_OMAP_SUBCLASS(443x, 0x443)
#define cpu_is_omap243x() 0
#define cpu_is_omap34xx() 0
#define cpu_is_omap343x() 0
+#define cpu_is_ti816x() 0
#define cpu_is_omap44xx() 0
#define cpu_is_omap443x() 0
@@ -170,11 +179,11 @@ IS_OMAP_SUBCLASS(443x, 0x443)
# undef cpu_is_omap24xx
# define cpu_is_omap24xx() is_omap24xx()
# endif
-# if defined (CONFIG_ARCH_OMAP2420)
+# if defined (CONFIG_SOC_OMAP2420)
# undef cpu_is_omap242x
# define cpu_is_omap242x() is_omap242x()
# endif
-# if defined (CONFIG_ARCH_OMAP2430)
+# if defined (CONFIG_SOC_OMAP2430)
# undef cpu_is_omap243x
# define cpu_is_omap243x() is_omap243x()
# endif
@@ -189,11 +198,11 @@ IS_OMAP_SUBCLASS(443x, 0x443)
# undef cpu_is_omap24xx
# define cpu_is_omap24xx() 1
# endif
-# if defined(CONFIG_ARCH_OMAP2420)
+# if defined(CONFIG_SOC_OMAP2420)
# undef cpu_is_omap242x
# define cpu_is_omap242x() 1
# endif
-# if defined(CONFIG_ARCH_OMAP2430)
+# if defined(CONFIG_SOC_OMAP2430)
# undef cpu_is_omap243x
# define cpu_is_omap243x() 1
# endif
@@ -201,7 +210,7 @@ IS_OMAP_SUBCLASS(443x, 0x443)
# undef cpu_is_omap34xx
# define cpu_is_omap34xx() 1
# endif
-# if defined(CONFIG_ARCH_OMAP3430)
+# if defined(CONFIG_SOC_OMAP3430)
# undef cpu_is_omap343x
# define cpu_is_omap343x() 1
# endif
@@ -330,6 +339,7 @@ IS_OMAP_TYPE(3517, 0x3517)
# undef cpu_is_omap3530
# undef cpu_is_omap3505
# undef cpu_is_omap3517
+# undef cpu_is_ti816x
# define cpu_is_omap3430() is_omap3430()
# define cpu_is_omap3503() (cpu_is_omap3430() && \
(!omap3_has_iva()) && \
@@ -345,6 +355,7 @@ IS_OMAP_TYPE(3517, 0x3517)
# define cpu_is_omap3517() is_omap3517()
# undef cpu_is_omap3630
# define cpu_is_omap3630() is_omap363x()
+# define cpu_is_ti816x() is_ti816x()
#endif
# if defined(CONFIG_ARCH_OMAP4)
@@ -389,9 +400,15 @@ IS_OMAP_TYPE(3517, 0x3517)
#define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 8))
#define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 8))
+#define TI816X_CLASS 0x81600034
+#define TI8168_REV_ES1_0 TI816X_CLASS
+#define TI8168_REV_ES1_1 (TI816X_CLASS | (OMAP_REVBITS_01 << 8))
+
#define OMAP443X_CLASS 0x44300044
-#define OMAP4430_REV_ES1_0 OMAP443X_CLASS
-#define OMAP4430_REV_ES2_0 0x44301044
+#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8))
+#define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8))
+#define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8))
+#define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8))
/*
* omap_chip bits
@@ -419,11 +436,16 @@ IS_OMAP_TYPE(3517, 0x3517)
#define CHIP_IS_OMAP3630ES1_1 (1 << 9)
#define CHIP_IS_OMAP3630ES1_2 (1 << 10)
#define CHIP_IS_OMAP4430ES2 (1 << 11)
+#define CHIP_IS_OMAP4430ES2_1 (1 << 12)
+#define CHIP_IS_OMAP4430ES2_2 (1 << 13)
+#define CHIP_IS_TI816X (1 << 14)
#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
-#define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1 | \
- CHIP_IS_OMAP4430ES2)
+#define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1 | \
+ CHIP_IS_OMAP4430ES2 | \
+ CHIP_IS_OMAP4430ES2_1 | \
+ CHIP_IS_OMAP4430ES2_2)
/*
* "GE" here represents "greater than or equal to" in terms of ES
@@ -455,6 +477,7 @@ extern u32 omap3_features;
#define OMAP3_HAS_ISP BIT(4)
#define OMAP3_HAS_192MHZ_CLK BIT(5)
#define OMAP3_HAS_IO_WAKEUP BIT(6)
+#define OMAP3_HAS_SDRC BIT(7)
#define OMAP3_HAS_FEATURE(feat,flag) \
static inline unsigned int omap3_has_ ##feat(void) \
@@ -469,5 +492,6 @@ OMAP3_HAS_FEATURE(neon, NEON)
OMAP3_HAS_FEATURE(isp, ISP)
OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
+OMAP3_HAS_FEATURE(sdrc, SDRC)
#endif
diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h
index 537f4e4..5e04ddc 100644
--- a/arch/arm/plat-omap/include/plat/display.h
+++ b/arch/arm/plat-omap/include/plat/display.h
@@ -23,6 +23,7 @@
#include <linux/list.h>
#include <linux/kobject.h>
#include <linux/device.h>
+#include <linux/platform_device.h>
#include <asm/atomic.h>
#define DISPC_IRQ_FRAMEDONE (1 << 0)
@@ -57,6 +58,7 @@ enum omap_display_type {
OMAP_DISPLAY_TYPE_SDI = 1 << 2,
OMAP_DISPLAY_TYPE_DSI = 1 << 3,
OMAP_DISPLAY_TYPE_VENC = 1 << 4,
+ OMAP_DISPLAY_TYPE_HDMI = 1 << 5,
};
enum omap_plane {
@@ -226,6 +228,23 @@ struct omap_dss_board_info {
struct omap_dss_device *default_device;
};
+#if defined(CONFIG_OMAP2_DSS_MODULE) || defined(CONFIG_OMAP2_DSS)
+/* Init with the board info */
+extern int omap_display_init(struct omap_dss_board_info *board_data);
+#else
+static inline int omap_display_init(struct omap_dss_board_info *board_data)
+{
+ return 0;
+}
+#endif
+
+struct omap_display_platform_data {
+ struct omap_dss_board_info *board_data;
+ /* TODO: Additional members to be added when PM is considered */
+
+ bool (*opt_clock_available)(const char *clk_role);
+};
+
struct omap_video_timings {
/* Unit: pixels */
u16 x_res;
@@ -385,8 +404,8 @@ struct omap_dss_device {
struct {
u16 regn;
u16 regm;
- u16 regm3;
- u16 regm4;
+ u16 regm_dispc;
+ u16 regm_dsi;
u16 lp_clk_div;
@@ -544,6 +563,9 @@ int omap_dsi_update(struct omap_dss_device *dssdev,
int channel,
u16 x, u16 y, u16 w, u16 h,
void (*callback)(int, void *), void *data);
+int omap_dsi_request_vc(struct omap_dss_device *dssdev, int *channel);
+int omap_dsi_set_vc_id(struct omap_dss_device *dssdev, int channel, int vc_id);
+void omap_dsi_release_vc(struct omap_dss_device *dssdev, int channel);
int omapdss_dsi_display_enable(struct omap_dss_device *dssdev);
void omapdss_dsi_display_disable(struct omap_dss_device *dssdev);
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index dfa3aff..d6c70d2 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -3,6 +3,12 @@
*
* OMAP Dual-Mode Timers
*
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Tarun Kanti DebBarma <tarun.kanti@ti.com>
+ * Thara Gopinath <thara@ti.com>
+ *
+ * Platform device conversion and hwmod support.
+ *
* Copyright (C) 2005 Nokia Corporation
* Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
* PWM and clock framwork support by Timo Teras.
@@ -44,6 +50,11 @@
#define OMAP_TIMER_TRIGGER_OVERFLOW 0x01
#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02
+/*
+ * IP revision identifier so that Highlander IP
+ * in OMAP4 can be distinguished.
+ */
+#define OMAP_TIMER_IP_VERSION_1 0x1
struct omap_dm_timer;
extern struct omap_dm_timer *gptimer_wakeup;
extern struct sys_timer omap_timer;
diff --git a/arch/arm/plat-omap/include/plat/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h
index ae39bcb..bd3c632 100644
--- a/arch/arm/plat-omap/include/plat/fpga.h
+++ b/arch/arm/plat-omap/include/plat/fpga.h
@@ -30,18 +30,18 @@ extern void omap1510_fpga_init_irq(void);
* ---------------------------------------------------------------------------
*/
/* maps in the FPGA registers and the ETHR registers */
-#define H2P2_DBG_FPGA_BASE IOMEM(0xE8000000) /* VA */
+#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */
#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */
#define H2P2_DBG_FPGA_START 0x04000000 /* PA */
#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300)
-#define H2P2_DBG_FPGA_FPGA_REV (H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */
-#define H2P2_DBG_FPGA_BOARD_REV (H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */
-#define H2P2_DBG_FPGA_GPIO (H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */
-#define H2P2_DBG_FPGA_LEDS (H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */
-#define H2P2_DBG_FPGA_MISC_INPUTS (H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */
-#define H2P2_DBG_FPGA_LAN_STATUS (H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */
-#define H2P2_DBG_FPGA_LAN_RESET (H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */
+#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */
+#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */
+#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */
+#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */
+#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */
+#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */
+#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */
/* NOTE: most boards don't have a static mapping for the FPGA ... */
struct h2p2_dbg_fpga {
@@ -81,55 +81,55 @@ struct h2p2_dbg_fpga {
* OMAP-1510 FPGA
* ---------------------------------------------------------------------------
*/
-#define OMAP1510_FPGA_BASE IOMEM(0xE8000000) /* VA */
+#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */
#define OMAP1510_FPGA_SIZE SZ_4K
#define OMAP1510_FPGA_START 0x08000000 /* PA */
/* Revision */
-#define OMAP1510_FPGA_REV_LOW (OMAP1510_FPGA_BASE + 0x0)
-#define OMAP1510_FPGA_REV_HIGH (OMAP1510_FPGA_BASE + 0x1)
+#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0)
+#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1)
-#define OMAP1510_FPGA_LCD_PANEL_CONTROL (OMAP1510_FPGA_BASE + 0x2)
-#define OMAP1510_FPGA_LED_DIGIT (OMAP1510_FPGA_BASE + 0x3)
-#define INNOVATOR_FPGA_HID_SPI (OMAP1510_FPGA_BASE + 0x4)
-#define OMAP1510_FPGA_POWER (OMAP1510_FPGA_BASE + 0x5)
+#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2)
+#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3)
+#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4)
+#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5)
/* Interrupt status */
-#define OMAP1510_FPGA_ISR_LO (OMAP1510_FPGA_BASE + 0x6)
-#define OMAP1510_FPGA_ISR_HI (OMAP1510_FPGA_BASE + 0x7)
+#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6)
+#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7)
/* Interrupt mask */
-#define OMAP1510_FPGA_IMR_LO (OMAP1510_FPGA_BASE + 0x8)
-#define OMAP1510_FPGA_IMR_HI (OMAP1510_FPGA_BASE + 0x9)
+#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8)
+#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9)
/* Reset registers */
-#define OMAP1510_FPGA_HOST_RESET (OMAP1510_FPGA_BASE + 0xa)
-#define OMAP1510_FPGA_RST (OMAP1510_FPGA_BASE + 0xb)
-
-#define OMAP1510_FPGA_AUDIO (OMAP1510_FPGA_BASE + 0xc)
-#define OMAP1510_FPGA_DIP (OMAP1510_FPGA_BASE + 0xe)
-#define OMAP1510_FPGA_FPGA_IO (OMAP1510_FPGA_BASE + 0xf)
-#define OMAP1510_FPGA_UART1 (OMAP1510_FPGA_BASE + 0x14)
-#define OMAP1510_FPGA_UART2 (OMAP1510_FPGA_BASE + 0x15)
-#define OMAP1510_FPGA_OMAP1510_STATUS (OMAP1510_FPGA_BASE + 0x16)
-#define OMAP1510_FPGA_BOARD_REV (OMAP1510_FPGA_BASE + 0x18)
-#define OMAP1510P1_PPT_DATA (OMAP1510_FPGA_BASE + 0x100)
-#define OMAP1510P1_PPT_STATUS (OMAP1510_FPGA_BASE + 0x101)
-#define OMAP1510P1_PPT_CONTROL (OMAP1510_FPGA_BASE + 0x102)
-
-#define OMAP1510_FPGA_TOUCHSCREEN (OMAP1510_FPGA_BASE + 0x204)
-
-#define INNOVATOR_FPGA_INFO (OMAP1510_FPGA_BASE + 0x205)
-#define INNOVATOR_FPGA_LCD_BRIGHT_LO (OMAP1510_FPGA_BASE + 0x206)
-#define INNOVATOR_FPGA_LCD_BRIGHT_HI (OMAP1510_FPGA_BASE + 0x207)
-#define INNOVATOR_FPGA_LED_GRN_LO (OMAP1510_FPGA_BASE + 0x208)
-#define INNOVATOR_FPGA_LED_GRN_HI (OMAP1510_FPGA_BASE + 0x209)
-#define INNOVATOR_FPGA_LED_RED_LO (OMAP1510_FPGA_BASE + 0x20a)
-#define INNOVATOR_FPGA_LED_RED_HI (OMAP1510_FPGA_BASE + 0x20b)
-#define INNOVATOR_FPGA_CAM_USB_CONTROL (OMAP1510_FPGA_BASE + 0x20c)
-#define INNOVATOR_FPGA_EXP_CONTROL (OMAP1510_FPGA_BASE + 0x20d)
-#define INNOVATOR_FPGA_ISR2 (OMAP1510_FPGA_BASE + 0x20e)
-#define INNOVATOR_FPGA_IMR2 (OMAP1510_FPGA_BASE + 0x210)
+#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa)
+#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb)
+
+#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc)
+#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe)
+#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf)
+#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14)
+#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15)
+#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16)
+#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18)
+#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100)
+#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101)
+#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102)
+
+#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204)
+
+#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205)
+#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206)
+#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207)
+#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208)
+#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209)
+#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a)
+#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b)
+#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c)
+#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d)
+#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e)
+#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210)
#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300)
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index 85ded59..12b3161 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -41,6 +41,8 @@
#define GPMC_NAND_ADDRESS 0x0000000b
#define GPMC_NAND_DATA 0x0000000c
+#define GPMC_ENABLE_IRQ 0x0000000d
+
/* ECC commands */
#define GPMC_ECC_READ 0 /* Reset Hardware ECC for read */
#define GPMC_ECC_WRITE 1 /* Reset Hardware ECC for write */
@@ -78,6 +80,19 @@
#define WR_RD_PIN_MONITORING 0x00600000
#define GPMC_PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F)
#define GPMC_PREFETCH_STATUS_COUNT(val) (val & 0x00003fff)
+#define GPMC_IRQ_FIFOEVENTENABLE 0x01
+#define GPMC_IRQ_COUNT_EVENT 0x02
+
+#define PREFETCH_FIFOTHRESHOLD_MAX 0x40
+#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8)
+
+enum omap_ecc {
+ /* 1-bit ecc: stored at end of spare area */
+ OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
+ OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
+ /* 1-bit ecc: stored at begining of spare area as romcode */
+ OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
+};
/*
* Note that all values in this struct are in nanoseconds except sync_clk
@@ -130,12 +145,11 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
extern void gpmc_cs_free(int cs);
extern int gpmc_cs_set_reserved(int cs, int reserved);
extern int gpmc_cs_reserved(int cs);
-extern int gpmc_prefetch_enable(int cs, int dma_mode,
+extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
unsigned int u32_count, int is_write);
extern int gpmc_prefetch_reset(int cs);
extern void omap3_gpmc_save_context(void);
extern void omap3_gpmc_restore_context(void);
-extern void gpmc_init(void);
extern int gpmc_read_status(int cmd);
extern int gpmc_cs_configure(int cs, int cmd, int wval);
extern int gpmc_nand_read(int cs, int cmd);
diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h
index d5b26ad..e87efe1 100644
--- a/arch/arm/plat-omap/include/plat/hardware.h
+++ b/arch/arm/plat-omap/include/plat/hardware.h
@@ -286,5 +286,6 @@
#include <plat/omap24xx.h>
#include <plat/omap34xx.h>
#include <plat/omap44xx.h>
+#include <plat/ti816x.h>
#endif /* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index ef4106c..d72ec85 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -259,7 +259,7 @@ struct omap_sdrc_params;
extern void omap1_map_common_io(void);
extern void omap1_init_common_hw(void);
-#ifdef CONFIG_ARCH_OMAP2420
+#ifdef CONFIG_SOC_OMAP2420
extern void omap242x_map_common_io(void);
#else
static inline void omap242x_map_common_io(void)
@@ -267,7 +267,7 @@ static inline void omap242x_map_common_io(void)
}
#endif
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
extern void omap243x_map_common_io(void);
#else
static inline void omap243x_map_common_io(void)
@@ -283,6 +283,14 @@ static inline void omap34xx_map_common_io(void)
}
#endif
+#ifdef CONFIG_SOC_OMAPTI816X
+extern void omapti816x_map_common_io(void);
+#else
+static inline void omapti816x_map_common_io(void)
+{
+}
+#endif
+
#ifdef CONFIG_ARCH_OMAP4
extern void omap44xx_map_common_io(void);
#else
diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h
index 69230d6..174f1b9 100644
--- a/arch/arm/plat-omap/include/plat/iommu.h
+++ b/arch/arm/plat-omap/include/plat/iommu.h
@@ -31,6 +31,7 @@ struct iommu {
struct clk *clk;
void __iomem *regbase;
struct device *dev;
+ void *isr_priv;
unsigned int refcount;
struct mutex iommu_lock; /* global for this whole object */
@@ -47,7 +48,7 @@ struct iommu {
struct list_head mmap;
struct mutex mmap_lock; /* protect mmap */
- int (*isr)(struct iommu *obj);
+ int (*isr)(struct iommu *obj, u32 da, u32 iommu_errs, void *priv);
void *ctx; /* iommu context: registres saved area */
u32 da_start;
@@ -109,6 +110,13 @@ struct iommu_platform_data {
u32 da_end;
};
+/* IOMMU errors */
+#define OMAP_IOMMU_ERR_TLB_MISS (1 << 0)
+#define OMAP_IOMMU_ERR_TRANS_FAULT (1 << 1)
+#define OMAP_IOMMU_ERR_EMU_MISS (1 << 2)
+#define OMAP_IOMMU_ERR_TBLWALK_FAULT (1 << 3)
+#define OMAP_IOMMU_ERR_MULTIHIT_FAULT (1 << 4)
+
#if defined(CONFIG_ARCH_OMAP1)
#error "iommu for this processor not implemented yet"
#else
@@ -154,11 +162,17 @@ extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end);
extern void flush_iotlb_all(struct iommu *obj);
extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e);
+extern void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd,
+ u32 **ppte);
extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova);
extern int iommu_set_da_range(struct iommu *obj, u32 start, u32 end);
extern struct iommu *iommu_get(const char *name);
extern void iommu_put(struct iommu *obj);
+extern int iommu_set_isr(const char *name,
+ int (*isr)(struct iommu *obj, u32 da, u32 iommu_errs,
+ void *priv),
+ void *isr_priv);
extern void iommu_save_ctx(struct iommu *obj);
extern void iommu_restore_ctx(struct iommu *obj);
diff --git a/arch/arm/plat-omap/include/plat/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h
index bdc7ce5..32a2f6c 100644
--- a/arch/arm/plat-omap/include/plat/iovmm.h
+++ b/arch/arm/plat-omap/include/plat/iovmm.h
@@ -71,8 +71,6 @@ struct iovm_struct {
#define IOVMF_LINEAR_MASK (3 << (2 + IOVMF_SW_SHIFT))
#define IOVMF_DA_FIXED (1 << (4 + IOVMF_SW_SHIFT))
-#define IOVMF_DA_ANON (2 << (4 + IOVMF_SW_SHIFT))
-#define IOVMF_DA_MASK (3 << (4 + IOVMF_SW_SHIFT))
extern struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da);
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 2910de9..d779283 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -315,9 +315,12 @@
#define INT_34XX_SSM_ABORT_IRQ 6
#define INT_34XX_SYS_NIRQ 7
#define INT_34XX_D2D_FW_IRQ 8
+#define INT_34XX_L3_DBG_IRQ 9
+#define INT_34XX_L3_APP_IRQ 10
#define INT_34XX_PRCM_MPU_IRQ 11
#define INT_34XX_MCBSP1_IRQ 16
#define INT_34XX_MCBSP2_IRQ 17
+#define INT_34XX_GPMC_IRQ 20
#define INT_34XX_MCBSP3_IRQ 22
#define INT_34XX_MCBSP4_IRQ 23
#define INT_34XX_CAM_IRQ 24
@@ -411,7 +414,13 @@
#define TWL_IRQ_END TWL6030_IRQ_END
#endif
-#define NR_IRQS TWL_IRQ_END
+/* GPMC related */
+#define OMAP_GPMC_IRQ_BASE (TWL_IRQ_END)
+#define OMAP_GPMC_NR_IRQS 7
+#define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
+
+
+#define NR_IRQS OMAP_GPMC_IRQ_END
#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))
diff --git a/arch/arm/plat-omap/include/plat/l3_2xxx.h b/arch/arm/plat-omap/include/plat/l3_2xxx.h
new file mode 100644
index 0000000..b8b5641
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/l3_2xxx.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/plat-omap/include/plat/l3_2xxx.h - L3 firewall definitions
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Sumit Semwal
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
+
+/* L3 CONNIDs */
+/* Display Sub system (DSS) */
+#define OMAP2_L3_CORE_FW_CONNID_DSS 8
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/l3_3xxx.h b/arch/arm/plat-omap/include/plat/l3_3xxx.h
new file mode 100644
index 0000000..cde1938
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/l3_3xxx.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/plat-omap/include/plat/l3_3xxx.h - L3 firewall definitions
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Sumit Semwal
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H
+
+/* L3 Initiator IDs */
+/* Display Sub system (DSS) */
+#define OMAP3_L3_CORE_FW_INIT_ID_DSS 29
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/l4_2xxx.h b/arch/arm/plat-omap/include/plat/l4_2xxx.h
new file mode 100644
index 0000000..3f39cf8
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/l4_2xxx.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/plat-omap/include/plat/l4_2xxx.h - L4 firewall definitions
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Sumit Semwal
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
+
+/* L4 CORE */
+/* Display Sub system (DSS) */
+#define OMAP2420_L4_CORE_FW_DSS_CORE_REGION 28
+#define OMAP2420_L4_CORE_FW_DSS_DISPC_REGION 29
+#define OMAP2420_L4_CORE_FW_DSS_RFBI_REGION 30
+#define OMAP2420_L4_CORE_FW_DSS_VENC_REGION 31
+#define OMAP2420_L4_CORE_FW_DSS_TA_REGION 32
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/l4_3xxx.h b/arch/arm/plat-omap/include/plat/l4_3xxx.h
index 5e19493..881a858 100644
--- a/arch/arm/plat-omap/include/plat/l4_3xxx.h
+++ b/arch/arm/plat-omap/include/plat/l4_3xxx.h
@@ -21,4 +21,14 @@
#define OMAP3_L4_CORE_FW_I2C3_REGION 73
#define OMAP3_L4_CORE_FW_I2C3_TA_REGION 74
+/* Display Sub system (DSS) */
+#define OMAP3_L4_CORE_FW_DSS_PROT_GROUP 2
+
+#define OMAP3_L4_CORE_FW_DSS_DSI_REGION 104
+#define OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION 3
+#define OMAP3_L4_CORE_FW_DSS_CORE_REGION 4
+#define OMAP3_L4_CORE_FW_DSS_DISPC_REGION 4
+#define OMAP3_L4_CORE_FW_DSS_RFBI_REGION 5
+#define OMAP3_L4_CORE_FW_DSS_VENC_REGION 6
+#define OMAP3_L4_CORE_FW_DSS_TA_REGION 7
#endif
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index b87d83c..f8f690a 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -37,6 +37,10 @@ static struct platform_device omap_mcbsp##port_nr = { \
.id = OMAP_MCBSP##port_nr, \
}
+#define MCBSP_CONFIG_TYPE2 0x2
+#define MCBSP_CONFIG_TYPE3 0x3
+#define MCBSP_CONFIG_TYPE4 0x4
+
#define OMAP7XX_MCBSP1_BASE 0xfffb1000
#define OMAP7XX_MCBSP2_BASE 0xfffb1800
@@ -48,32 +52,14 @@ static struct platform_device omap_mcbsp##port_nr = { \
#define OMAP1610_MCBSP2_BASE 0xfffb1000
#define OMAP1610_MCBSP3_BASE 0xe1017000
-#define OMAP24XX_MCBSP1_BASE 0x48074000
-#define OMAP24XX_MCBSP2_BASE 0x48076000
-#define OMAP2430_MCBSP3_BASE 0x4808c000
-#define OMAP2430_MCBSP4_BASE 0x4808e000
-#define OMAP2430_MCBSP5_BASE 0x48096000
-
-#define OMAP34XX_MCBSP1_BASE 0x48074000
-#define OMAP34XX_MCBSP2_BASE 0x49022000
-#define OMAP34XX_MCBSP2_ST_BASE 0x49028000
-#define OMAP34XX_MCBSP3_BASE 0x49024000
-#define OMAP34XX_MCBSP3_ST_BASE 0x4902A000
-#define OMAP34XX_MCBSP3_BASE 0x49024000
-#define OMAP34XX_MCBSP4_BASE 0x49026000
-#define OMAP34XX_MCBSP5_BASE 0x48096000
-
-#define OMAP44XX_MCBSP1_BASE 0x49022000
-#define OMAP44XX_MCBSP2_BASE 0x49024000
-#define OMAP44XX_MCBSP3_BASE 0x49026000
-#define OMAP44XX_MCBSP4_BASE 0x48096000
-
-#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+#ifdef CONFIG_ARCH_OMAP1
#define OMAP_MCBSP_REG_DRR2 0x00
#define OMAP_MCBSP_REG_DRR1 0x02
#define OMAP_MCBSP_REG_DXR2 0x04
#define OMAP_MCBSP_REG_DXR1 0x06
+#define OMAP_MCBSP_REG_DRR 0x02
+#define OMAP_MCBSP_REG_DXR 0x06
#define OMAP_MCBSP_REG_SPCR2 0x08
#define OMAP_MCBSP_REG_SPCR1 0x0a
#define OMAP_MCBSP_REG_RCR2 0x0c
@@ -106,13 +92,6 @@ static struct platform_device omap_mcbsp##port_nr = { \
#define OMAP_MCBSP_REG_XCCR 0x00
#define OMAP_MCBSP_REG_RCCR 0x00
-#define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
-#define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
-
-#define AUDIO_MCBSP OMAP_MCBSP1
-#define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX
-#define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX
-
#else
#define OMAP_MCBSP_REG_DRR2 0x00
@@ -168,13 +147,6 @@ static struct platform_device omap_mcbsp##port_nr = { \
#define OMAP_ST_REG_SFIRCR 0x28
#define OMAP_ST_REG_SSELCR 0x2C
-#define AUDIO_MCBSP_DATAWRITE (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
-#define AUDIO_MCBSP_DATAREAD (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
-
-#define AUDIO_MCBSP OMAP_MCBSP2
-#define AUDIO_DMA_TX OMAP24XX_DMA_MCBSP2_TX
-#define AUDIO_DMA_RX OMAP24XX_DMA_MCBSP2_RX
-
#endif
/************************** McBSP SPCR1 bit definitions ***********************/
@@ -428,8 +400,9 @@ struct omap_mcbsp_platform_data {
#ifdef CONFIG_ARCH_OMAP3
/* Sidetone block for McBSP 2 and 3 */
unsigned long phys_base_st;
- u16 buffer_size;
#endif
+ u16 buffer_size;
+ unsigned int mcbsp_config_type;
};
struct omap_mcbsp_st_data {
@@ -445,6 +418,7 @@ struct omap_mcbsp_st_data {
struct omap_mcbsp {
struct device *dev;
unsigned long phys_base;
+ unsigned long phys_dma_base;
void __iomem *io_base;
u8 id;
u8 free;
@@ -471,7 +445,6 @@ struct omap_mcbsp {
/* Protect the field .free, while checking if the mcbsp is in use */
spinlock_t lock;
struct omap_mcbsp_platform_data *pdata;
- struct clk *iclk;
struct clk *fclk;
#ifdef CONFIG_ARCH_OMAP3
struct omap_mcbsp_st_data *st_data;
@@ -480,7 +453,17 @@ struct omap_mcbsp {
u16 max_rx_thres;
#endif
void *reg_cache;
+ unsigned int mcbsp_config_type;
};
+
+/**
+ * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod
+ * @sidetone: name of the sidetone device
+ */
+struct omap_mcbsp_dev_attr {
+ const char *sidetone;
+};
+
extern struct omap_mcbsp **mcbsp_ptr;
extern int omap_mcbsp_count, omap_mcbsp_cache_size;
@@ -488,8 +471,8 @@ extern int omap_mcbsp_count, omap_mcbsp_cache_size;
#define id_to_mcbsp_ptr(id) mcbsp_ptr[id];
int omap_mcbsp_init(void);
-void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
- int size);
+void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
+ struct omap_mcbsp_platform_data *config, int size);
void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
#ifdef CONFIG_ARCH_OMAP3
void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
@@ -539,6 +522,9 @@ int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type);
void omap2_mcbsp1_mux_clkr_src(u8 mux);
void omap2_mcbsp1_mux_fsr_src(u8 mux);
+int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream);
+int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream);
+
#ifdef CONFIG_ARCH_OMAP3
/* Sidetone specific API */
int omap_st_set_chgain(unsigned int id, int channel, s16 chgain);
diff --git a/arch/arm/plat-omap/include/plat/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h
index 1254e49..3d51b18 100644
--- a/arch/arm/plat-omap/include/plat/mcspi.h
+++ b/arch/arm/plat-omap/include/plat/mcspi.h
@@ -1,8 +1,19 @@
#ifndef _OMAP2_MCSPI_H
#define _OMAP2_MCSPI_H
+#define OMAP2_MCSPI_REV 0
+#define OMAP3_MCSPI_REV 1
+#define OMAP4_MCSPI_REV 2
+
+#define OMAP4_MCSPI_REG_OFFSET 0x100
+
struct omap2_mcspi_platform_config {
unsigned short num_cs;
+ unsigned int regs_offset;
+};
+
+struct omap2_mcspi_dev_attr {
+ unsigned short num_chipselect;
};
struct omap2_mcspi_device_config {
diff --git a/arch/arm/plat-omap/include/plat/memory.h b/arch/arm/plat-omap/include/plat/memory.h
index f8d922f..e6720aa 100644
--- a/arch/arm/plat-omap/include/plat/memory.h
+++ b/arch/arm/plat-omap/include/plat/memory.h
@@ -37,9 +37,9 @@
* Physical DRAM offset.
*/
#if defined(CONFIG_ARCH_OMAP1)
-#define PHYS_OFFSET UL(0x10000000)
+#define PLAT_PHYS_OFFSET UL(0x10000000)
#else
-#define PHYS_OFFSET UL(0x80000000)
+#define PLAT_PHYS_OFFSET UL(0x80000000)
#endif
/*
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index f57f36a..f38fef9 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -24,25 +24,19 @@
#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */
#define OMAP24XX_NR_MMC 2
-#define OMAP34XX_NR_MMC 3
-#define OMAP44XX_NR_MMC 5
#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE
-#define OMAP3_HSMMC_SIZE 0x200
-#define OMAP4_HSMMC_SIZE 0x1000
#define OMAP2_MMC1_BASE 0x4809c000
-#define OMAP2_MMC2_BASE 0x480b4000
-#define OMAP3_MMC3_BASE 0x480ad000
-#define OMAP4_MMC4_BASE 0x480d1000
-#define OMAP4_MMC5_BASE 0x480d5000
+
#define OMAP4_MMC_REG_OFFSET 0x100
-#define HSMMC5 (1 << 4)
-#define HSMMC4 (1 << 3)
-#define HSMMC3 (1 << 2)
-#define HSMMC2 (1 << 1)
-#define HSMMC1 (1 << 0)
#define OMAP_MMC_MAX_SLOTS 2
+#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(1)
+
+struct omap_mmc_dev_attr {
+ u8 flags;
+};
+
struct omap_mmc_platform_data {
/* back-link to device */
struct device *dev;
@@ -71,6 +65,9 @@ struct omap_mmc_platform_data {
u64 dma_mask;
+ /* Integrating attributes from the omap_hwmod layer */
+ u8 controller_flags;
+
/* Register offset deviation */
u16 reg_offset;
@@ -159,8 +156,7 @@ extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers);
-void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
- int nr_controllers);
+void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
int omap_mmc_add(const char *name, int id, unsigned long base,
unsigned long size, unsigned int irq,
struct omap_mmc_platform_data *data);
@@ -169,8 +165,7 @@ static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers)
{
}
-static inline void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
- int nr_controllers)
+static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
{
}
static inline int omap_mmc_add(const char *name, int id, unsigned long base,
diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
index ffd909f..999ffba 100644
--- a/arch/arm/plat-omap/include/plat/multi.h
+++ b/arch/arm/plat-omap/include/plat/multi.h
@@ -66,7 +66,7 @@
# error "OMAP1 and OMAP2PLUS can't be selected at the same time"
# endif
#endif
-#ifdef CONFIG_ARCH_OMAP2420
+#ifdef CONFIG_SOC_OMAP2420
# ifdef OMAP_NAME
# undef MULTI_OMAP2
# define MULTI_OMAP2
@@ -74,7 +74,7 @@
# define OMAP_NAME omap2420
# endif
#endif
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
# ifdef OMAP_NAME
# undef MULTI_OMAP2
# define MULTI_OMAP2
diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h
index 6562cd0..d86d1ec 100644
--- a/arch/arm/plat-omap/include/plat/nand.h
+++ b/arch/arm/plat-omap/include/plat/nand.h
@@ -8,8 +8,16 @@
* published by the Free Software Foundation.
*/
+#include <plat/gpmc.h>
#include <linux/mtd/partitions.h>
+enum nand_io {
+ NAND_OMAP_PREFETCH_POLLED = 0, /* prefetch polled mode, default */
+ NAND_OMAP_POLLED, /* polled mode, without prefetch */
+ NAND_OMAP_PREFETCH_DMA, /* prefetch enabled sDMA mode */
+ NAND_OMAP_PREFETCH_IRQ /* prefetch enabled irq mode */
+};
+
struct omap_nand_platform_data {
unsigned int options;
int cs;
@@ -20,8 +28,11 @@ struct omap_nand_platform_data {
int (*nand_setup)(void);
int (*dev_ready)(struct omap_nand_platform_data *);
int dma_channel;
+ int gpmc_irq;
+ enum nand_io xfer_type;
unsigned long phys_base;
int devsize;
+ enum omap_ecc ecc_opt;
};
/* minimum size for IO mapping */
diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h
index 98fc8b4..b9e8588 100644
--- a/arch/arm/plat-omap/include/plat/omap34xx.h
+++ b/arch/arm/plat-omap/include/plat/omap34xx.h
@@ -56,8 +56,12 @@
#define OMAP3430_ISP_RESZ_BASE (OMAP3430_ISP_BASE + 0x1000)
#define OMAP3430_ISP_SBL_BASE (OMAP3430_ISP_BASE + 0x1200)
#define OMAP3430_ISP_MMU_BASE (OMAP3430_ISP_BASE + 0x1400)
-#define OMAP3430_ISP_CSI2A_BASE (OMAP3430_ISP_BASE + 0x1800)
-#define OMAP3430_ISP_CSI2PHY_BASE (OMAP3430_ISP_BASE + 0x1970)
+#define OMAP3430_ISP_CSI2A_REGS1_BASE (OMAP3430_ISP_BASE + 0x1800)
+#define OMAP3430_ISP_CSIPHY2_BASE (OMAP3430_ISP_BASE + 0x1970)
+#define OMAP3630_ISP_CSI2A_REGS2_BASE (OMAP3430_ISP_BASE + 0x19C0)
+#define OMAP3630_ISP_CSI2C_REGS1_BASE (OMAP3430_ISP_BASE + 0x1C00)
+#define OMAP3630_ISP_CSIPHY1_BASE (OMAP3430_ISP_BASE + 0x1D70)
+#define OMAP3630_ISP_CSI2C_REGS2_BASE (OMAP3430_ISP_BASE + 0x1DC0)
#define OMAP3430_ISP_END (OMAP3430_ISP_BASE + 0x06F)
#define OMAP3430_ISP_CBUFF_END (OMAP3430_ISP_CBUFF_BASE + 0x077)
@@ -69,8 +73,12 @@
#define OMAP3430_ISP_RESZ_END (OMAP3430_ISP_RESZ_BASE + 0x0AB)
#define OMAP3430_ISP_SBL_END (OMAP3430_ISP_SBL_BASE + 0x0FB)
#define OMAP3430_ISP_MMU_END (OMAP3430_ISP_MMU_BASE + 0x06F)
-#define OMAP3430_ISP_CSI2A_END (OMAP3430_ISP_CSI2A_BASE + 0x16F)
-#define OMAP3430_ISP_CSI2PHY_END (OMAP3430_ISP_CSI2PHY_BASE + 0x007)
+#define OMAP3430_ISP_CSI2A_REGS1_END (OMAP3430_ISP_CSI2A_REGS1_BASE + 0x16F)
+#define OMAP3430_ISP_CSIPHY2_END (OMAP3430_ISP_CSIPHY2_BASE + 0x00B)
+#define OMAP3630_ISP_CSI2A_REGS2_END (OMAP3630_ISP_CSI2A_REGS2_BASE + 0x3F)
+#define OMAP3630_ISP_CSI2C_REGS1_END (OMAP3630_ISP_CSI2C_REGS1_BASE + 0x16F)
+#define OMAP3630_ISP_CSIPHY1_END (OMAP3630_ISP_CSIPHY1_BASE + 0x00B)
+#define OMAP3630_ISP_CSI2C_REGS2_END (OMAP3630_ISP_CSI2C_REGS2_BASE + 0x3F)
#define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000)
#define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000)
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 1eee85a..1adea9c 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -1,7 +1,7 @@
/*
* omap_hwmod macros, structures
*
- * Copyright (C) 2009-2010 Nokia Corporation
+ * Copyright (C) 2009-2011 Nokia Corporation
* Paul Walmsley
*
* Created in collaboration with (alphabetical order): Benoît Cousson,
@@ -30,11 +30,11 @@
#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
#include <linux/kernel.h>
+#include <linux/init.h>
#include <linux/list.h>
#include <linux/ioport.h>
#include <linux/spinlock.h>
#include <plat/cpu.h>
-#include <plat/voltage.h>
struct omap_device;
@@ -90,6 +90,9 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
struct omap_hwmod_mux_info {
int nr_pads;
struct omap_device_pad *pads;
+ int nr_pads_dynamic;
+ struct omap_device_pad **pads_dynamic;
+ bool enabled;
};
/**
@@ -124,6 +127,7 @@ struct omap_hwmod_dma_info {
* struct omap_hwmod_rst_info - IPs reset lines use by hwmod
* @name: name of the reset line (module local name)
* @rst_shift: Offset of the reset bit
+ * @st_shift: Offset of the reset status bit (OMAP2/3 only)
*
* @name should be something short, e.g., "cpu0" or "rst". It is defined
* locally to the hwmod.
@@ -131,6 +135,7 @@ struct omap_hwmod_dma_info {
struct omap_hwmod_rst_info {
const char *name;
u8 rst_shift;
+ u8 st_shift;
};
/**
@@ -178,7 +183,8 @@ struct omap_hwmod_omap2_firewall {
#define ADDR_TYPE_RT (1 << 1)
/**
- * struct omap_hwmod_addr_space - MPU address space handled by the hwmod
+ * struct omap_hwmod_addr_space - address space handled by the hwmod
+ * @name: name of the address space
* @pa_start: starting physical address
* @pa_end: ending physical address
* @flags: (see omap_hwmod_addr_space.flags macros above)
@@ -187,6 +193,7 @@ struct omap_hwmod_omap2_firewall {
* structure. GPMC is one example.
*/
struct omap_hwmod_addr_space {
+ const char *name;
u32 pa_start;
u32 pa_end;
u8 flags;
@@ -370,9 +377,11 @@ struct omap_hwmod_omap4_prcm {
* of standby, rather than relying on module smart-standby
* HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
* SDRAM controller, etc. XXX probably belongs outside the main hwmod file
+ * XXX Should be HWMOD_SETUP_NO_RESET
* HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
* controller, etc. XXX probably belongs outside the main hwmod file
- * HWMOD_NO_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
+ * XXX Should be HWMOD_SETUP_NO_IDLE
+ * HWMOD_NO_OCP_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
* when module is enabled, rather than the default, which is to
* enable autoidle
* HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
@@ -535,11 +544,12 @@ struct omap_hwmod {
const struct omap_chip_id omap_chip;
};
-int omap_hwmod_init(struct omap_hwmod **ohs);
+int omap_hwmod_register(struct omap_hwmod **ohs);
struct omap_hwmod *omap_hwmod_lookup(const char *name);
int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
void *data);
-int omap_hwmod_late_init(void);
+
+int __init omap_hwmod_setup_one(const char *name);
int omap_hwmod_enable(struct omap_hwmod *oh);
int _omap_hwmod_enable(struct omap_hwmod *oh);
@@ -555,6 +565,7 @@ int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode);
+int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle);
int omap_hwmod_reset(struct omap_hwmod *oh);
void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
@@ -589,6 +600,8 @@ int omap_hwmod_for_each_by_class(const char *classname,
int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
+int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
+
/*
* Chip variant-specific hwmod init routines - XXX should be converted
* to use initcalls once the initial boot ordering is straightened out
diff --git a/arch/arm/plat-omap/include/plat/onenand.h b/arch/arm/plat-omap/include/plat/onenand.h
index 1b430d5..2858667 100644
--- a/arch/arm/plat-omap/include/plat/onenand.h
+++ b/arch/arm/plat-omap/include/plat/onenand.h
@@ -15,12 +15,20 @@
#define ONENAND_SYNC_READ (1 << 0)
#define ONENAND_SYNC_READWRITE (1 << 1)
+struct onenand_freq_info {
+ u16 maf_id;
+ u16 dev_id;
+ u16 ver_id;
+};
+
struct omap_onenand_platform_data {
int cs;
int gpio_irq;
struct mtd_partition *parts;
int nr_parts;
- int (*onenand_setup)(void __iomem *, int freq);
+ int (*onenand_setup)(void __iomem *, int *freq_ptr);
+ int (*get_freq)(const struct onenand_freq_info *freq_info,
+ bool *clk_dep);
int dma_channel;
u8 flags;
u8 regulator_can_sleep;
diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h
index 2fdf8c8..267f43b 100644
--- a/arch/arm/plat-omap/include/plat/prcm.h
+++ b/arch/arm/plat-omap/include/plat/prcm.h
@@ -28,7 +28,6 @@
#define __ASM_ARM_ARCH_OMAP_PRCM_H
u32 omap_prcm_get_reset_sources(void);
-void omap_prcm_arch_reset(char mode, const char *cmd);
int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
const char *name);
diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h
index efd87c8..925b12b 100644
--- a/arch/arm/plat-omap/include/plat/sdrc.h
+++ b/arch/arm/plat-omap/include/plat/sdrc.h
@@ -124,8 +124,14 @@ struct omap_sdrc_params {
u32 mr;
};
-void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1);
+#else
+static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1) {};
+#endif
+
int omap2_sdrc_get_params(unsigned long r,
struct omap_sdrc_params **sdrc_cs0,
struct omap_sdrc_params **sdrc_cs1);
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index cec5d56..2723f91 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -27,7 +27,7 @@
* 2. We assume printascii is called at least once before paging_init,
* and addruart has a chance to read OMAP_UART_INFO
*/
-#define OMAP_UART_INFO (PHYS_OFFSET + 0x3ffc)
+#define OMAP_UART_INFO (PLAT_PHYS_OFFSET + 0x3ffc)
/* OMAP1 serial ports */
#define OMAP1_UART1_BASE 0xfffb0000
@@ -51,6 +51,11 @@
#define OMAP4_UART3_BASE 0x48020000
#define OMAP4_UART4_BASE 0x4806e000
+/* TI816X serial ports */
+#define TI816X_UART1_BASE 0x48020000
+#define TI816X_UART2_BASE 0x48022000
+#define TI816X_UART3_BASE 0x48024000
+
/* External port on Zoom2/3 */
#define ZOOM_UART_BASE 0x10000000
#define ZOOM_UART_VIRT 0xfa400000
@@ -81,6 +86,9 @@
#define OMAP4UART2 OMAP2UART2
#define OMAP4UART3 43
#define OMAP4UART4 44
+#define TI816XUART1 81
+#define TI816XUART2 82
+#define TI816XUART3 83
#define ZOOM_UART 95 /* Only on zoom2/3 */
/* This is only used by 8250.c for omap1510 */
@@ -96,7 +104,6 @@
struct omap_board_data;
-extern void __init omap_serial_early_init(void);
extern void omap_serial_init(void);
extern void omap_serial_init_port(struct omap_board_data *bdata);
extern int omap_uart_can_sleep(void);
diff --git a/arch/arm/plat-omap/include/plat/smartreflex.h b/arch/arm/plat-omap/include/plat/smartreflex.h
deleted file mode 100644
index 6568c88..0000000
--- a/arch/arm/plat-omap/include/plat/smartreflex.h
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * OMAP Smartreflex Defines and Routines
- *
- * Author: Thara Gopinath <thara@ti.com>
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Thara Gopinath <thara@ti.com>
- *
- * Copyright (C) 2008 Nokia Corporation
- * Kalle Jokiniemi
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Lesly A M <x0080970@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_OMAP_SMARTREFLEX_H
-#define __ASM_ARM_OMAP_SMARTREFLEX_H
-
-#include <linux/platform_device.h>
-#include <plat/voltage.h>
-
-/*
- * Different Smartreflex IPs version. The v1 is the 65nm version used in
- * OMAP3430. The v2 is the update for the 45nm version of the IP
- * used in OMAP3630 and OMAP4430
- */
-#define SR_TYPE_V1 1
-#define SR_TYPE_V2 2
-
-/* SMART REFLEX REG ADDRESS OFFSET */
-#define SRCONFIG 0x00
-#define SRSTATUS 0x04
-#define SENVAL 0x08
-#define SENMIN 0x0C
-#define SENMAX 0x10
-#define SENAVG 0x14
-#define AVGWEIGHT 0x18
-#define NVALUERECIPROCAL 0x1c
-#define SENERROR_V1 0x20
-#define ERRCONFIG_V1 0x24
-#define IRQ_EOI 0x20
-#define IRQSTATUS_RAW 0x24
-#define IRQSTATUS 0x28
-#define IRQENABLE_SET 0x2C
-#define IRQENABLE_CLR 0x30
-#define SENERROR_V2 0x34
-#define ERRCONFIG_V2 0x38
-
-/* Bit/Shift Positions */
-
-/* SRCONFIG */
-#define SRCONFIG_ACCUMDATA_SHIFT 22
-#define SRCONFIG_SRCLKLENGTH_SHIFT 12
-#define SRCONFIG_SENNENABLE_V1_SHIFT 5
-#define SRCONFIG_SENPENABLE_V1_SHIFT 3
-#define SRCONFIG_SENNENABLE_V2_SHIFT 1
-#define SRCONFIG_SENPENABLE_V2_SHIFT 0
-#define SRCONFIG_CLKCTRL_SHIFT 0
-
-#define SRCONFIG_ACCUMDATA_MASK (0x3ff << 22)
-
-#define SRCONFIG_SRENABLE BIT(11)
-#define SRCONFIG_SENENABLE BIT(10)
-#define SRCONFIG_ERRGEN_EN BIT(9)
-#define SRCONFIG_MINMAXAVG_EN BIT(8)
-#define SRCONFIG_DELAYCTRL BIT(2)
-
-/* AVGWEIGHT */
-#define AVGWEIGHT_SENPAVGWEIGHT_SHIFT 2
-#define AVGWEIGHT_SENNAVGWEIGHT_SHIFT 0
-
-/* NVALUERECIPROCAL */
-#define NVALUERECIPROCAL_SENPGAIN_SHIFT 20
-#define NVALUERECIPROCAL_SENNGAIN_SHIFT 16
-#define NVALUERECIPROCAL_RNSENP_SHIFT 8
-#define NVALUERECIPROCAL_RNSENN_SHIFT 0
-
-/* ERRCONFIG */
-#define ERRCONFIG_ERRWEIGHT_SHIFT 16
-#define ERRCONFIG_ERRMAXLIMIT_SHIFT 8
-#define ERRCONFIG_ERRMINLIMIT_SHIFT 0
-
-#define SR_ERRWEIGHT_MASK (0x07 << 16)
-#define SR_ERRMAXLIMIT_MASK (0xff << 8)
-#define SR_ERRMINLIMIT_MASK (0xff << 0)
-
-#define ERRCONFIG_VPBOUNDINTEN_V1 BIT(31)
-#define ERRCONFIG_VPBOUNDINTST_V1 BIT(30)
-#define ERRCONFIG_MCUACCUMINTEN BIT(29)
-#define ERRCONFIG_MCUACCUMINTST BIT(28)
-#define ERRCONFIG_MCUVALIDINTEN BIT(27)
-#define ERRCONFIG_MCUVALIDINTST BIT(26)
-#define ERRCONFIG_MCUBOUNDINTEN BIT(25)
-#define ERRCONFIG_MCUBOUNDINTST BIT(24)
-#define ERRCONFIG_MCUDISACKINTEN BIT(23)
-#define ERRCONFIG_VPBOUNDINTST_V2 BIT(23)
-#define ERRCONFIG_MCUDISACKINTST BIT(22)
-#define ERRCONFIG_VPBOUNDINTEN_V2 BIT(22)
-
-#define ERRCONFIG_STATUS_V1_MASK (ERRCONFIG_VPBOUNDINTST_V1 | \
- ERRCONFIG_MCUACCUMINTST | \
- ERRCONFIG_MCUVALIDINTST | \
- ERRCONFIG_MCUBOUNDINTST | \
- ERRCONFIG_MCUDISACKINTST)
-/* IRQSTATUS */
-#define IRQSTATUS_MCUACCUMINT BIT(3)
-#define IRQSTATUS_MCVALIDINT BIT(2)
-#define IRQSTATUS_MCBOUNDSINT BIT(1)
-#define IRQSTATUS_MCUDISABLEACKINT BIT(0)
-
-/* IRQENABLE_SET and IRQENABLE_CLEAR */
-#define IRQENABLE_MCUACCUMINT BIT(3)
-#define IRQENABLE_MCUVALIDINT BIT(2)
-#define IRQENABLE_MCUBOUNDSINT BIT(1)
-#define IRQENABLE_MCUDISABLEACKINT BIT(0)
-
-/* Common Bit values */
-
-#define SRCLKLENGTH_12MHZ_SYSCLK 0x3c
-#define SRCLKLENGTH_13MHZ_SYSCLK 0x41
-#define SRCLKLENGTH_19MHZ_SYSCLK 0x60
-#define SRCLKLENGTH_26MHZ_SYSCLK 0x82
-#define SRCLKLENGTH_38MHZ_SYSCLK 0xC0
-
-/*
- * 3430 specific values. Maybe these should be passed from board file or
- * pmic structures.
- */
-#define OMAP3430_SR_ACCUMDATA 0x1f4
-
-#define OMAP3430_SR1_SENPAVGWEIGHT 0x03
-#define OMAP3430_SR1_SENNAVGWEIGHT 0x03
-
-#define OMAP3430_SR2_SENPAVGWEIGHT 0x01
-#define OMAP3430_SR2_SENNAVGWEIGHT 0x01
-
-#define OMAP3430_SR_ERRWEIGHT 0x04
-#define OMAP3430_SR_ERRMAXLIMIT 0x02
-
-/**
- * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass
- * pmic specific info to smartreflex driver
- *
- * @sr_pmic_init: API to initialize smartreflex on the PMIC side.
- */
-struct omap_sr_pmic_data {
- void (*sr_pmic_init) (void);
-};
-
-#ifdef CONFIG_OMAP_SMARTREFLEX
-/*
- * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
- * The smartreflex class driver should pass the class type.
- * Should be used to populate the class_type field of the
- * omap_smartreflex_class_data structure.
- */
-#define SR_CLASS1 0x1
-#define SR_CLASS2 0x2
-#define SR_CLASS3 0x3
-
-/**
- * struct omap_sr_class_data - Smartreflex class driver info
- *
- * @enable: API to enable a particular class smaartreflex.
- * @disable: API to disable a particular class smartreflex.
- * @configure: API to configure a particular class smartreflex.
- * @notify: API to notify the class driver about an event in SR.
- * Not needed for class3.
- * @notify_flags: specify the events to be notified to the class driver
- * @class_type: specify which smartreflex class.
- * Can be used by the SR driver to take any class
- * based decisions.
- */
-struct omap_sr_class_data {
- int (*enable)(struct voltagedomain *voltdm);
- int (*disable)(struct voltagedomain *voltdm, int is_volt_reset);
- int (*configure)(struct voltagedomain *voltdm);
- int (*notify)(struct voltagedomain *voltdm, u32 status);
- u8 notify_flags;
- u8 class_type;
-};
-
-/**
- * struct omap_sr_nvalue_table - Smartreflex n-target value info
- *
- * @efuse_offs: The offset of the efuse where n-target values are stored.
- * @nvalue: The n-target value.
- */
-struct omap_sr_nvalue_table {
- u32 efuse_offs;
- u32 nvalue;
-};
-
-/**
- * struct omap_sr_data - Smartreflex platform data.
- *
- * @ip_type: Smartreflex IP type.
- * @senp_mod: SENPENABLE value for the sr
- * @senn_mod: SENNENABLE value for sr
- * @nvalue_count: Number of distinct nvalues in the nvalue table
- * @enable_on_init: whether this sr module needs to enabled at
- * boot up or not.
- * @nvalue_table: table containing the efuse offsets and nvalues
- * corresponding to them.
- * @voltdm: Pointer to the voltage domain associated with the SR
- */
-struct omap_sr_data {
- int ip_type;
- u32 senp_mod;
- u32 senn_mod;
- int nvalue_count;
- bool enable_on_init;
- struct omap_sr_nvalue_table *nvalue_table;
- struct voltagedomain *voltdm;
-};
-
-/* Smartreflex module enable/disable interface */
-void omap_sr_enable(struct voltagedomain *voltdm);
-void omap_sr_disable(struct voltagedomain *voltdm);
-void omap_sr_disable_reset_volt(struct voltagedomain *voltdm);
-
-/* API to register the pmic specific data with the smartreflex driver. */
-void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data);
-
-/* Smartreflex driver hooks to be called from Smartreflex class driver */
-int sr_enable(struct voltagedomain *voltdm, unsigned long volt);
-void sr_disable(struct voltagedomain *voltdm);
-int sr_configure_errgen(struct voltagedomain *voltdm);
-int sr_configure_minmax(struct voltagedomain *voltdm);
-
-/* API to register the smartreflex class driver with the smartreflex driver */
-int sr_register_class(struct omap_sr_class_data *class_data);
-#else
-static inline void omap_sr_enable(struct voltagedomain *voltdm) {}
-static inline void omap_sr_disable(struct voltagedomain *voltdm) {}
-static inline void omap_sr_disable_reset_volt(
- struct voltagedomain *voltdm) {}
-static inline void omap_sr_register_pmic(
- struct omap_sr_pmic_data *pmic_data) {}
-#endif
-#endif
diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h
index 9967d5e..f500fc3 100644
--- a/arch/arm/plat-omap/include/plat/sram.h
+++ b/arch/arm/plat-omap/include/plat/sram.h
@@ -12,7 +12,19 @@
#define __ARCH_ARM_OMAP_SRAM_H
#ifndef __ASSEMBLY__
-extern void * omap_sram_push(void * start, unsigned long size);
+#include <asm/fncpy.h>
+
+extern void *omap_sram_push_address(unsigned long size);
+
+/* Macro to push a function to the internal SRAM, using the fncpy API */
+#define omap_sram_push(funcp, size) ({ \
+ typeof(&(funcp)) _res = NULL; \
+ void *_sram_address = omap_sram_push_address(size); \
+ if (_sram_address) \
+ _res = fncpy(_sram_address, &(funcp), size); \
+ _res; \
+})
+
extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h
index d0a119f..c5fa9e9 100644
--- a/arch/arm/plat-omap/include/plat/system.h
+++ b/arch/arm/plat-omap/include/plat/system.h
@@ -4,48 +4,14 @@
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <linux/clk.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-#include <plat/prcm.h>
-
-#ifndef CONFIG_MACH_VOICEBLUE
-#define voiceblue_reset() do {} while (0)
-#else
-extern void voiceblue_reset(void);
-#endif
+#include <asm/proc-fns.h>
static inline void arch_idle(void)
{
cpu_do_idle();
}
-static inline void omap1_arch_reset(char mode, const char *cmd)
-{
- /*
- * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
- * "Global Software Reset Affects Traffic Controller Frequency".
- */
- if (cpu_is_omap5912()) {
- omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4),
- DPLL_CTL);
- omap_writew(0x8, ARM_RSTCT1);
- }
-
- if (machine_is_voiceblue())
- voiceblue_reset();
- else
- omap_writew(1, ARM_RSTCT1);
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- if (!cpu_class_is_omap2())
- omap1_arch_reset(mode, cmd);
- else
- omap_prcm_arch_reset(mode, cmd);
-}
+extern void (*arch_reset)(char, const char *);
#endif
diff --git a/arch/arm/plat-omap/include/plat/ti816x.h b/arch/arm/plat-omap/include/plat/ti816x.h
new file mode 100644
index 0000000..50510f5
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/ti816x.h
@@ -0,0 +1,27 @@
+/*
+ * This file contains the address data for various TI816X modules.
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_TI816X_H
+#define __ASM_ARCH_TI816X_H
+
+#define L4_SLOW_TI816X_BASE 0x48000000
+
+#define TI816X_SCM_BASE 0x48140000
+#define TI816X_CTRL_BASE TI816X_SCM_BASE
+#define TI816X_PRCM_BASE 0x48180000
+
+#define TI816X_ARM_INTC_BASE 0x48200000
+
+#endif /* __ASM_ARCH_TI816X_H */
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index ad98b85..30b891c 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -93,6 +93,10 @@ static inline void flush(void)
#define DEBUG_LL_ZOOM(mach) \
_DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
+#define DEBUG_LL_TI816X(p, mach) \
+ _DEBUG_LL_ENTRY(mach, TI816X_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ TI816XUART##p)
+
static inline void __arch_decomp_setup(unsigned long arch_id)
{
int port = 0;
@@ -166,6 +170,9 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
DEBUG_LL_ZOOM(omap_zoom2);
DEBUG_LL_ZOOM(omap_zoom3);
+ /* TI8168 base boards using UART3 */
+ DEBUG_LL_TI816X(3, ti8168evm);
+
} while (0);
}
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 450a332..02b96c8 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -7,15 +7,12 @@
#include <plat/board.h>
#define OMAP3_HS_USB_PORTS 3
-enum ehci_hcd_omap_mode {
- EHCI_HCD_OMAP_MODE_UNKNOWN,
- EHCI_HCD_OMAP_MODE_PHY,
- EHCI_HCD_OMAP_MODE_TLL,
- EHCI_HCD_OMAP_MODE_HSIC,
-};
-enum ohci_omap3_port_mode {
- OMAP_OHCI_PORT_MODE_UNUSED,
+enum usbhs_omap_port_mode {
+ OMAP_USBHS_PORT_MODE_UNUSED,
+ OMAP_EHCI_PORT_MODE_PHY,
+ OMAP_EHCI_PORT_MODE_TLL,
+ OMAP_EHCI_PORT_MODE_HSIC,
OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
@@ -25,24 +22,45 @@ enum ohci_omap3_port_mode {
OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
- OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM,
+ OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
};
-struct ehci_hcd_omap_platform_data {
- enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS];
- unsigned phy_reset:1;
+struct usbhs_omap_board_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
/* have to be valid if phy_reset is true and portx is in phy mode */
int reset_gpio_port[OMAP3_HS_USB_PORTS];
+
+ /* Set this to true for ES2.x silicon */
+ unsigned es2_compatibility:1;
+
+ unsigned phy_reset:1;
+
+ /*
+ * Regulators for USB PHYs.
+ * Each PHY can have a separate regulator.
+ */
+ struct regulator *regulator[OMAP3_HS_USB_PORTS];
};
-struct ohci_hcd_omap_platform_data {
- enum ohci_omap3_port_mode port_mode[OMAP3_HS_USB_PORTS];
+struct ehci_hcd_omap_platform_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
+ int reset_gpio_port[OMAP3_HS_USB_PORTS];
+ struct regulator *regulator[OMAP3_HS_USB_PORTS];
+ unsigned phy_reset:1;
+};
- /* Set this to true for ES2.x silicon */
+struct ohci_hcd_omap_platform_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
unsigned es2_compatibility:1;
};
+struct usbhs_omap_platform_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
+
+ struct ehci_hcd_omap_platform_data *ehci_data;
+ struct ohci_hcd_omap_platform_data *ohci_data;
+};
/*-------------------------------------------------------------------------*/
#define OMAP1_OTG_BASE 0xfffb0400
@@ -80,17 +98,22 @@ enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
extern void usb_musb_init(struct omap_musb_board_data *board_data);
-extern void usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata);
+extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
-extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata);
+extern int omap_usbhs_enable(struct device *dev);
+extern void omap_usbhs_disable(struct device *dev);
extern int omap4430_phy_power(struct device *dev, int ID, int on);
extern int omap4430_phy_set_clk(struct device *dev, int on);
extern int omap4430_phy_init(struct device *dev);
extern int omap4430_phy_exit(struct device *dev);
-
+extern int omap4430_phy_suspend(struct device *dev, int suspend);
#endif
+extern void am35x_musb_reset(void);
+extern void am35x_musb_phy_power(u8 on);
+extern void am35x_musb_clear_irq(void);
+extern void am35x_musb_set_mode(u8 musb_mode);
/*
* FIXME correct answer depends on hmc_mode,
diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h
deleted file mode 100644
index 5bd204e..0000000
--- a/arch/arm/plat-omap/include/plat/voltage.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * OMAP Voltage Management Routines
- *
- * Author: Thara Gopinath <thara@ti.com>
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Thara Gopinath <thara@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
-#define __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
-
-#include <linux/err.h>
-
-#define VOLTSCALE_VPFORCEUPDATE 1
-#define VOLTSCALE_VCBYPASS 2
-
-/*
- * OMAP3 GENERIC setup times. Revisit to see if these needs to be
- * passed from board or PMIC file
- */
-#define OMAP3_CLKSETUP 0xff
-#define OMAP3_VOLTOFFSET 0xff
-#define OMAP3_VOLTSETUP2 0xff
-
-/* Voltage value defines */
-#define OMAP3430_VDD_MPU_OPP1_UV 975000
-#define OMAP3430_VDD_MPU_OPP2_UV 1075000
-#define OMAP3430_VDD_MPU_OPP3_UV 1200000
-#define OMAP3430_VDD_MPU_OPP4_UV 1270000
-#define OMAP3430_VDD_MPU_OPP5_UV 1350000
-
-#define OMAP3430_VDD_CORE_OPP1_UV 975000
-#define OMAP3430_VDD_CORE_OPP2_UV 1050000
-#define OMAP3430_VDD_CORE_OPP3_UV 1150000
-
-#define OMAP3630_VDD_MPU_OPP50_UV 1012500
-#define OMAP3630_VDD_MPU_OPP100_UV 1200000
-#define OMAP3630_VDD_MPU_OPP120_UV 1325000
-#define OMAP3630_VDD_MPU_OPP1G_UV 1375000
-
-#define OMAP3630_VDD_CORE_OPP50_UV 1000000
-#define OMAP3630_VDD_CORE_OPP100_UV 1200000
-
-#define OMAP4430_VDD_MPU_OPP50_UV 930000
-#define OMAP4430_VDD_MPU_OPP100_UV 1100000
-#define OMAP4430_VDD_MPU_OPPTURBO_UV 1260000
-#define OMAP4430_VDD_MPU_OPPNITRO_UV 1350000
-
-#define OMAP4430_VDD_IVA_OPP50_UV 930000
-#define OMAP4430_VDD_IVA_OPP100_UV 1100000
-#define OMAP4430_VDD_IVA_OPPTURBO_UV 1260000
-
-#define OMAP4430_VDD_CORE_OPP50_UV 930000
-#define OMAP4430_VDD_CORE_OPP100_UV 1100000
-
-/**
- * struct voltagedomain - omap voltage domain global structure.
- * @name: Name of the voltage domain which can be used as a unique
- * identifier.
- */
-struct voltagedomain {
- char *name;
-};
-
-/**
- * struct omap_volt_data - Omap voltage specific data.
- * @voltage_nominal: The possible voltage value in uV
- * @sr_efuse_offs: The offset of the efuse register(from system
- * control module base address) from where to read
- * the n-target value for the smartreflex module.
- * @sr_errminlimit: Error min limit value for smartreflex. This value
- * differs at differnet opp and thus is linked
- * with voltage.
- * @vp_errorgain: Error gain value for the voltage processor. This
- * field also differs according to the voltage/opp.
- */
-struct omap_volt_data {
- u32 volt_nominal;
- u32 sr_efuse_offs;
- u8 sr_errminlimit;
- u8 vp_errgain;
-};
-
-/**
- * struct omap_volt_pmic_info - PMIC specific data required by voltage driver.
- * @slew_rate: PMIC slew rate (in uv/us)
- * @step_size: PMIC voltage step size (in uv)
- * @vsel_to_uv: PMIC API to convert vsel value to actual voltage in uV.
- * @uv_to_vsel: PMIC API to convert voltage in uV to vsel value.
- */
-struct omap_volt_pmic_info {
- int slew_rate;
- int step_size;
- u32 on_volt;
- u32 onlp_volt;
- u32 ret_volt;
- u32 off_volt;
- u16 volt_setup_time;
- u8 vp_erroroffset;
- u8 vp_vstepmin;
- u8 vp_vstepmax;
- u8 vp_vddmin;
- u8 vp_vddmax;
- u8 vp_timeout_us;
- u8 i2c_slave_addr;
- u8 pmic_reg;
- unsigned long (*vsel_to_uv) (const u8 vsel);
- u8 (*uv_to_vsel) (unsigned long uV);
-};
-
-unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm);
-void omap_vp_enable(struct voltagedomain *voltdm);
-void omap_vp_disable(struct voltagedomain *voltdm);
-int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
- unsigned long target_volt);
-void omap_voltage_reset(struct voltagedomain *voltdm);
-void omap_voltage_get_volttable(struct voltagedomain *voltdm,
- struct omap_volt_data **volt_data);
-struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
- unsigned long volt);
-unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm);
-struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm);
-#ifdef CONFIG_PM
-int omap_voltage_register_pmic(struct voltagedomain *voltdm,
- struct omap_volt_pmic_info *pmic_info);
-void omap_change_voltscale_method(struct voltagedomain *voltdm,
- int voltscale_method);
-/* API to get the voltagedomain pointer */
-struct voltagedomain *omap_voltage_domain_lookup(char *name);
-
-int omap_voltage_late_init(void);
-#else
-static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm,
- struct omap_volt_pmic_info *pmic_info)
-{
- return -EINVAL;
-}
-static inline void omap_change_voltscale_method(struct voltagedomain *voltdm,
- int voltscale_method) {}
-static inline int omap_voltage_late_init(void)
-{
- return -EINVAL;
-}
-static inline struct voltagedomain *omap_voltage_domain_lookup(char *name)
-{
- return ERR_PTR(-EINVAL);
-}
-#endif
-
-#endif
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index f1295fa..f1ecfa9 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -85,7 +85,10 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
}
#endif
#ifdef CONFIG_ARCH_OMAP3
- if (cpu_is_omap34xx()) {
+ if (cpu_is_ti816x()) {
+ if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE))
+ return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT);
+ } else if (cpu_is_omap34xx()) {
if (BETWEEN(p, L3_34XX_PHYS, L3_34XX_SIZE))
return XLATE(p, L3_34XX_PHYS, L3_34XX_VIRT);
if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE))
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index b1107c0..8a51fd5 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -104,6 +104,9 @@ static int iommu_enable(struct iommu *obj)
if (!obj)
return -EINVAL;
+ if (!arch_iommu)
+ return -ENODEV;
+
clk_enable(obj->clk);
err = arch_iommu->enable(obj);
@@ -780,25 +783,19 @@ static void iopgtable_clear_entry_all(struct iommu *obj)
*/
static irqreturn_t iommu_fault_handler(int irq, void *data)
{
- u32 stat, da;
+ u32 da, errs;
u32 *iopgd, *iopte;
- int err = -EIO;
struct iommu *obj = data;
if (!obj->refcount)
return IRQ_NONE;
- /* Dynamic loading TLB or PTE */
- if (obj->isr)
- err = obj->isr(obj);
-
- if (!err)
- return IRQ_HANDLED;
-
clk_enable(obj->clk);
- stat = iommu_report_fault(obj, &da);
+ errs = iommu_report_fault(obj, &da);
clk_disable(obj->clk);
- if (!stat)
+
+ /* Fault callback or TLB/PTE Dynamic loading */
+ if (obj->isr && !obj->isr(obj, da, errs, obj->isr_priv))
return IRQ_HANDLED;
iommu_disable(obj);
@@ -806,15 +803,16 @@ static irqreturn_t iommu_fault_handler(int irq, void *data)
iopgd = iopgd_offset(obj, da);
if (!iopgd_is_table(*iopgd)) {
- dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x\n", __func__,
- da, iopgd, *iopgd);
+ dev_err(obj->dev, "%s: errs:0x%08x da:0x%08x pgd:0x%p "
+ "*pgd:px%08x\n", obj->name, errs, da, iopgd, *iopgd);
return IRQ_NONE;
}
iopte = iopte_offset(iopgd, da);
- dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n",
- __func__, da, iopgd, *iopgd, iopte, *iopte);
+ dev_err(obj->dev, "%s: errs:0x%08x da:0x%08x pgd:0x%p *pgd:0x%08x "
+ "pte:0x%p *pte:0x%08x\n", obj->name, errs, da, iopgd, *iopgd,
+ iopte, *iopte);
return IRQ_NONE;
}
@@ -917,6 +915,33 @@ void iommu_put(struct iommu *obj)
}
EXPORT_SYMBOL_GPL(iommu_put);
+int iommu_set_isr(const char *name,
+ int (*isr)(struct iommu *obj, u32 da, u32 iommu_errs,
+ void *priv),
+ void *isr_priv)
+{
+ struct device *dev;
+ struct iommu *obj;
+
+ dev = driver_find_device(&omap_iommu_driver.driver, NULL, (void *)name,
+ device_match_by_alias);
+ if (!dev)
+ return -ENODEV;
+
+ obj = to_iommu(dev);
+ mutex_lock(&obj->iommu_lock);
+ if (obj->refcount != 0) {
+ mutex_unlock(&obj->iommu_lock);
+ return -EBUSY;
+ }
+ obj->isr = isr;
+ obj->isr_priv = isr_priv;
+ mutex_unlock(&obj->iommu_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(iommu_set_isr);
+
/*
* OMAP Device MMU(IOMMU) detection
*/
@@ -957,11 +982,6 @@ static int __devinit omap_iommu_probe(struct platform_device *pdev)
err = -ENODEV;
goto err_mem;
}
- obj->regbase = ioremap(res->start, resource_size(res));
- if (!obj->regbase) {
- err = -ENOMEM;
- goto err_mem;
- }
res = request_mem_region(res->start, resource_size(res),
dev_name(&pdev->dev));
@@ -970,6 +990,12 @@ static int __devinit omap_iommu_probe(struct platform_device *pdev)
goto err_mem;
}
+ obj->regbase = ioremap(res->start, resource_size(res));
+ if (!obj->regbase) {
+ err = -ENOMEM;
+ goto err_ioremap;
+ }
+
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
err = -ENODEV;
@@ -998,8 +1024,9 @@ static int __devinit omap_iommu_probe(struct platform_device *pdev)
err_pgd:
free_irq(irq, obj);
err_irq:
- release_mem_region(res->start, resource_size(res));
iounmap(obj->regbase);
+err_ioremap:
+ release_mem_region(res->start, resource_size(res));
err_mem:
clk_put(obj->clk);
err_clk:
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index 6dc1296..51ef43e 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -271,20 +271,21 @@ static struct iovm_struct *alloc_iovm_area(struct iommu *obj, u32 da,
size_t bytes, u32 flags)
{
struct iovm_struct *new, *tmp;
- u32 start, prev_end, alignement;
+ u32 start, prev_end, alignment;
if (!obj || !bytes)
return ERR_PTR(-EINVAL);
start = da;
- alignement = PAGE_SIZE;
+ alignment = PAGE_SIZE;
- if (flags & IOVMF_DA_ANON) {
- start = obj->da_start;
+ if (~flags & IOVMF_DA_FIXED) {
+ /* Don't map address 0 */
+ start = obj->da_start ? obj->da_start : alignment;
if (flags & IOVMF_LINEAR)
- alignement = iopgsz_max(bytes);
- start = roundup(start, alignement);
+ alignment = iopgsz_max(bytes);
+ start = roundup(start, alignment);
} else if (start < obj->da_start || start > obj->da_end ||
obj->da_end - start < bytes) {
return ERR_PTR(-EINVAL);
@@ -303,8 +304,8 @@ static struct iovm_struct *alloc_iovm_area(struct iommu *obj, u32 da,
if (tmp->da_start > start && (tmp->da_start - start) >= bytes)
goto found;
- if (tmp->da_end >= start && flags & IOVMF_DA_ANON)
- start = roundup(tmp->da_end + 1, alignement);
+ if (tmp->da_end >= start && ~flags & IOVMF_DA_FIXED)
+ start = roundup(tmp->da_end + 1, alignment);
prev_end = tmp->da_end;
}
@@ -650,7 +651,6 @@ u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt,
flags &= IOVMF_HW_MASK;
flags |= IOVMF_DISCONT;
flags |= IOVMF_MMIO;
- flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
da = __iommu_vmap(obj, da, sgt, va, bytes, flags);
if (IS_ERR_VALUE(da))
@@ -690,7 +690,7 @@ EXPORT_SYMBOL_GPL(iommu_vunmap);
* @flags: iovma and page property
*
* Allocate @bytes linearly and creates 1-n-1 mapping and returns
- * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set.
+ * @da again, which might be adjusted if 'IOVMF_DA_FIXED' is not set.
*/
u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
{
@@ -709,7 +709,6 @@ u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
flags &= IOVMF_HW_MASK;
flags |= IOVMF_DISCONT;
flags |= IOVMF_ALLOC;
- flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
sgt = sgtable_alloc(bytes, flags, da, 0);
if (IS_ERR(sgt)) {
@@ -780,7 +779,7 @@ static u32 __iommu_kmap(struct iommu *obj, u32 da, u32 pa, void *va,
* @flags: iovma and page property
*
* Creates 1-1-1 mapping and returns @da again, which can be
- * adjusted if 'IOVMF_DA_ANON' is set.
+ * adjusted if 'IOVMF_DA_FIXED' is not set.
*/
u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
u32 flags)
@@ -799,7 +798,6 @@ u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
flags &= IOVMF_HW_MASK;
flags |= IOVMF_LINEAR;
flags |= IOVMF_MMIO;
- flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
da = __iommu_kmap(obj, da, pa, va, bytes, flags);
if (IS_ERR_VALUE(da))
@@ -838,7 +836,7 @@ EXPORT_SYMBOL_GPL(iommu_kunmap);
* @flags: iovma and page property
*
* Allocate @bytes linearly and creates 1-1-1 mapping and returns
- * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set.
+ * @da again, which might be adjusted if 'IOVMF_DA_FIXED' is not set.
*/
u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
{
@@ -858,7 +856,6 @@ u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
flags &= IOVMF_HW_MASK;
flags |= IOVMF_LINEAR;
flags |= IOVMF_ALLOC;
- flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
da = __iommu_kmap(obj, da, pa, va, bytes, flags);
if (IS_ERR_VALUE(da))
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 459b319..69ddc9f 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -32,7 +32,6 @@
#include <plat/mailbox.h>
-static struct workqueue_struct *mboxd;
static struct omap_mbox **mboxes;
static int mbox_configured;
@@ -197,7 +196,7 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox)
/* no more messages in the fifo. clear IRQ source. */
ack_mbox_irq(mbox, IRQ_RX);
nomem:
- queue_work(mboxd, &mbox->rxq->work);
+ schedule_work(&mbox->rxq->work);
}
static irqreturn_t mbox_interrupt(int irq, void *p)
@@ -307,7 +306,7 @@ static void omap_mbox_fini(struct omap_mbox *mbox)
if (!--mbox->use_count) {
free_irq(mbox->irq, mbox);
tasklet_kill(&mbox->txq->tasklet);
- flush_work(&mbox->rxq->work);
+ flush_work_sync(&mbox->rxq->work);
mbox_queue_free(mbox->txq);
mbox_queue_free(mbox->rxq);
}
@@ -322,15 +321,18 @@ static void omap_mbox_fini(struct omap_mbox *mbox)
struct omap_mbox *omap_mbox_get(const char *name, struct notifier_block *nb)
{
- struct omap_mbox *mbox;
- int ret;
+ struct omap_mbox *_mbox, *mbox = NULL;
+ int i, ret;
if (!mboxes)
return ERR_PTR(-EINVAL);
- for (mbox = *mboxes; mbox; mbox++)
- if (!strcmp(mbox->name, name))
+ for (i = 0; (_mbox = mboxes[i]); i++) {
+ if (!strcmp(_mbox->name, name)) {
+ mbox = _mbox;
break;
+ }
+ }
if (!mbox)
return ERR_PTR(-ENOENT);
@@ -406,10 +408,6 @@ static int __init omap_mbox_init(void)
if (err)
return err;
- mboxd = create_workqueue("mboxd");
- if (!mboxd)
- return -ENOMEM;
-
/* kfifo size sanity check: alignment and minimal size */
mbox_kfifo_size = ALIGN(mbox_kfifo_size, sizeof(mbox_msg_t));
mbox_kfifo_size = max_t(unsigned int, mbox_kfifo_size,
@@ -421,7 +419,6 @@ subsys_initcall(omap_mbox_init);
static void __exit omap_mbox_exit(void)
{
- destroy_workqueue(mboxd);
class_unregister(&omap_mbox_class);
}
module_exit(omap_mbox_exit);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index b5a6e17..d598d9f 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -27,6 +27,8 @@
#include <plat/dma.h>
#include <plat/mcbsp.h>
+#include <plat/omap_device.h>
+#include <linux/pm_runtime.h>
/* XXX These "sideways" includes are a sign that something is wrong */
#include "../mach-omap2/cm2xxx_3xxx.h"
@@ -227,10 +229,83 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
}
EXPORT_SYMBOL(omap_mcbsp_config);
+/**
+ * omap_mcbsp_dma_params - returns the dma channel number
+ * @id - mcbsp id
+ * @stream - indicates the direction of data flow (rx or tx)
+ *
+ * Returns the dma channel number for the rx channel or tx channel
+ * based on the value of @stream for the requested mcbsp given by @id
+ */
+int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream)
+{
+ struct omap_mcbsp *mcbsp;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+ mcbsp = id_to_mcbsp_ptr(id);
+
+ if (stream)
+ return mcbsp->dma_rx_sync;
+ else
+ return mcbsp->dma_tx_sync;
+}
+EXPORT_SYMBOL(omap_mcbsp_dma_ch_params);
+
+/**
+ * omap_mcbsp_dma_reg_params - returns the address of mcbsp data register
+ * @id - mcbsp id
+ * @stream - indicates the direction of data flow (rx or tx)
+ *
+ * Returns the address of mcbsp data transmit register or data receive register
+ * to be used by DMA for transferring/receiving data based on the value of
+ * @stream for the requested mcbsp given by @id
+ */
+int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream)
+{
+ struct omap_mcbsp *mcbsp;
+ int data_reg;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+ mcbsp = id_to_mcbsp_ptr(id);
+
+ data_reg = mcbsp->phys_dma_base;
+
+ if (mcbsp->mcbsp_config_type < MCBSP_CONFIG_TYPE2) {
+ if (stream)
+ data_reg += OMAP_MCBSP_REG_DRR1;
+ else
+ data_reg += OMAP_MCBSP_REG_DXR1;
+ } else {
+ if (stream)
+ data_reg += OMAP_MCBSP_REG_DRR;
+ else
+ data_reg += OMAP_MCBSP_REG_DXR;
+ }
+
+ return data_reg;
+}
+EXPORT_SYMBOL(omap_mcbsp_dma_reg_params);
+
#ifdef CONFIG_ARCH_OMAP3
+static struct omap_device *find_omap_device_by_dev(struct device *dev)
+{
+ struct platform_device *pdev = container_of(dev,
+ struct platform_device, dev);
+ return container_of(pdev, struct omap_device, pdev);
+}
+
static void omap_st_on(struct omap_mcbsp *mcbsp)
{
unsigned int w;
+ struct omap_device *od;
+
+ od = find_omap_device_by_dev(mcbsp->dev);
/*
* Sidetone uses McBSP ICLK - which must not idle when sidetones
@@ -244,9 +319,6 @@ static void omap_st_on(struct omap_mcbsp *mcbsp)
w = MCBSP_READ(mcbsp, SSELCR);
MCBSP_WRITE(mcbsp, SSELCR, w | SIDETONEEN);
- w = MCBSP_ST_READ(mcbsp, SYSCONFIG);
- MCBSP_ST_WRITE(mcbsp, SYSCONFIG, w & ~(ST_AUTOIDLE));
-
/* Enable Sidetone from Sidetone Core */
w = MCBSP_ST_READ(mcbsp, SSELCR);
MCBSP_ST_WRITE(mcbsp, SSELCR, w | ST_SIDETONEEN);
@@ -255,13 +327,13 @@ static void omap_st_on(struct omap_mcbsp *mcbsp)
static void omap_st_off(struct omap_mcbsp *mcbsp)
{
unsigned int w;
+ struct omap_device *od;
+
+ od = find_omap_device_by_dev(mcbsp->dev);
w = MCBSP_ST_READ(mcbsp, SSELCR);
MCBSP_ST_WRITE(mcbsp, SSELCR, w & ~(ST_SIDETONEEN));
- w = MCBSP_ST_READ(mcbsp, SYSCONFIG);
- MCBSP_ST_WRITE(mcbsp, SYSCONFIG, w | ST_AUTOIDLE);
-
w = MCBSP_READ(mcbsp, SSELCR);
MCBSP_WRITE(mcbsp, SSELCR, w & ~(SIDETONEEN));
@@ -273,9 +345,9 @@ static void omap_st_off(struct omap_mcbsp *mcbsp)
static void omap_st_fir_write(struct omap_mcbsp *mcbsp, s16 *fir)
{
u16 val, i;
+ struct omap_device *od;
- val = MCBSP_ST_READ(mcbsp, SYSCONFIG);
- MCBSP_ST_WRITE(mcbsp, SYSCONFIG, val & ~(ST_AUTOIDLE));
+ od = find_omap_device_by_dev(mcbsp->dev);
val = MCBSP_ST_READ(mcbsp, SSELCR);
@@ -303,9 +375,9 @@ static void omap_st_chgain(struct omap_mcbsp *mcbsp)
{
u16 w;
struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
+ struct omap_device *od;
- w = MCBSP_ST_READ(mcbsp, SYSCONFIG);
- MCBSP_ST_WRITE(mcbsp, SYSCONFIG, w & ~(ST_AUTOIDLE));
+ od = find_omap_device_by_dev(mcbsp->dev);
w = MCBSP_ST_READ(mcbsp, SSELCR);
@@ -648,48 +720,33 @@ EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode);
static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
{
+ struct omap_device *od;
+
+ od = find_omap_device_by_dev(mcbsp->dev);
/*
* Enable wakup behavior, smart idle and all wakeups
* REVISIT: some wakeups may be unnecessary
*/
if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- u16 syscon;
-
- syscon = MCBSP_READ(mcbsp, SYSCON);
- syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
-
- if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) {
- syscon |= (ENAWAKEUP | SIDLEMODE(0x02) |
- CLOCKACTIVITY(0x02));
- MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
- } else {
- syscon |= SIDLEMODE(0x01);
- }
-
- MCBSP_WRITE(mcbsp, SYSCON, syscon);
+ MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
}
}
static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
{
+ struct omap_device *od;
+
+ od = find_omap_device_by_dev(mcbsp->dev);
+
/*
* Disable wakup behavior, smart idle and all wakeups
*/
if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- u16 syscon;
-
- syscon = MCBSP_READ(mcbsp, SYSCON);
- syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
/*
* HW bug workaround - If no_idle mode is taken, we need to
* go to smart_idle before going to always_idle, or the
* device will not hit retention anymore.
*/
- syscon |= SIDLEMODE(0x02);
- MCBSP_WRITE(mcbsp, SYSCON, syscon);
-
- syscon &= ~(SIDLEMODE(0x03));
- MCBSP_WRITE(mcbsp, SYSCON, syscon);
MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
}
@@ -764,8 +821,7 @@ int omap_mcbsp_request(unsigned int id)
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request)
mcbsp->pdata->ops->request(id);
- clk_enable(mcbsp->iclk);
- clk_enable(mcbsp->fclk);
+ pm_runtime_get_sync(mcbsp->dev);
/* Do procedure specific to omap34xx arch, if applicable */
omap34xx_mcbsp_request(mcbsp);
@@ -813,8 +869,7 @@ err_clk_disable:
/* Do procedure specific to omap34xx arch, if applicable */
omap34xx_mcbsp_free(mcbsp);
- clk_disable(mcbsp->fclk);
- clk_disable(mcbsp->iclk);
+ pm_runtime_put_sync(mcbsp->dev);
spin_lock(&mcbsp->lock);
mcbsp->free = true;
@@ -844,8 +899,7 @@ void omap_mcbsp_free(unsigned int id)
/* Do procedure specific to omap34xx arch, if applicable */
omap34xx_mcbsp_free(mcbsp);
- clk_disable(mcbsp->fclk);
- clk_disable(mcbsp->iclk);
+ pm_runtime_put_sync(mcbsp->dev);
if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) {
/* Free IRQs */
@@ -1649,7 +1703,8 @@ static const struct attribute_group sidetone_attr_group = {
static int __devinit omap_st_add(struct omap_mcbsp *mcbsp)
{
- struct omap_mcbsp_platform_data *pdata = mcbsp->pdata;
+ struct platform_device *pdev;
+ struct resource *res;
struct omap_mcbsp_st_data *st_data;
int err;
@@ -1659,7 +1714,10 @@ static int __devinit omap_st_add(struct omap_mcbsp *mcbsp)
goto err1;
}
- st_data->io_base_st = ioremap(pdata->phys_base_st, SZ_4K);
+ pdev = container_of(mcbsp->dev, struct platform_device, dev);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sidetone");
+ st_data->io_base_st = ioremap(res->start, resource_size(res));
if (!st_data->io_base_st) {
err = -ENOMEM;
goto err2;
@@ -1748,6 +1806,7 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data;
struct omap_mcbsp *mcbsp;
int id = pdev->id - 1;
+ struct resource *res;
int ret = 0;
if (!pdata) {
@@ -1777,47 +1836,78 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
mcbsp->dma_tx_lch = -1;
mcbsp->dma_rx_lch = -1;
- mcbsp->phys_base = pdata->phys_base;
- mcbsp->io_base = ioremap(pdata->phys_base, SZ_4K);
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpu");
+ if (!res) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "%s:mcbsp%d has invalid memory"
+ "resource\n", __func__, pdev->id);
+ ret = -ENOMEM;
+ goto exit;
+ }
+ }
+ mcbsp->phys_base = res->start;
+ omap_mcbsp_cache_size = resource_size(res);
+ mcbsp->io_base = ioremap(res->start, resource_size(res));
if (!mcbsp->io_base) {
ret = -ENOMEM;
goto err_ioremap;
}
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dma");
+ if (!res)
+ mcbsp->phys_dma_base = mcbsp->phys_base;
+ else
+ mcbsp->phys_dma_base = res->start;
+
/* Default I/O is IRQ based */
mcbsp->io_type = OMAP_MCBSP_IRQ_IO;
- mcbsp->tx_irq = pdata->tx_irq;
- mcbsp->rx_irq = pdata->rx_irq;
- mcbsp->dma_rx_sync = pdata->dma_rx_sync;
- mcbsp->dma_tx_sync = pdata->dma_tx_sync;
- mcbsp->iclk = clk_get(&pdev->dev, "ick");
- if (IS_ERR(mcbsp->iclk)) {
- ret = PTR_ERR(mcbsp->iclk);
- dev_err(&pdev->dev, "unable to get ick: %d\n", ret);
- goto err_iclk;
+ mcbsp->tx_irq = platform_get_irq_byname(pdev, "tx");
+ mcbsp->rx_irq = platform_get_irq_byname(pdev, "rx");
+
+ /* From OMAP4 there will be a single irq line */
+ if (mcbsp->tx_irq == -ENXIO)
+ mcbsp->tx_irq = platform_get_irq(pdev, 0);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
+ if (!res) {
+ dev_err(&pdev->dev, "%s:mcbsp%d has invalid rx DMA channel\n",
+ __func__, pdev->id);
+ ret = -ENODEV;
+ goto err_res;
+ }
+ mcbsp->dma_rx_sync = res->start;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
+ if (!res) {
+ dev_err(&pdev->dev, "%s:mcbsp%d has invalid tx DMA channel\n",
+ __func__, pdev->id);
+ ret = -ENODEV;
+ goto err_res;
}
+ mcbsp->dma_tx_sync = res->start;
mcbsp->fclk = clk_get(&pdev->dev, "fck");
if (IS_ERR(mcbsp->fclk)) {
ret = PTR_ERR(mcbsp->fclk);
dev_err(&pdev->dev, "unable to get fck: %d\n", ret);
- goto err_fclk;
+ goto err_res;
}
mcbsp->pdata = pdata;
mcbsp->dev = &pdev->dev;
mcbsp_ptr[id] = mcbsp;
+ mcbsp->mcbsp_config_type = pdata->mcbsp_config_type;
platform_set_drvdata(pdev, mcbsp);
+ pm_runtime_enable(mcbsp->dev);
/* Initialize mcbsp properties for OMAP34XX if needed / applicable */
omap34xx_device_init(mcbsp);
return 0;
-err_fclk:
- clk_put(mcbsp->iclk);
-err_iclk:
+err_res:
iounmap(mcbsp->io_base);
err_ioremap:
kfree(mcbsp);
@@ -1839,7 +1929,6 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
omap34xx_device_exit(mcbsp);
clk_put(mcbsp->fclk);
- clk_put(mcbsp->iclk);
iounmap(mcbsp->io_base);
kfree(mcbsp);
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 57adb27..9bbda9a 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -83,9 +83,11 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/clk.h>
+#include <linux/clkdev.h>
#include <plat/omap_device.h>
#include <plat/omap_hwmod.h>
+#include <plat/clock.h>
/* These parameters are passed to _omap_device_{de,}activate() */
#define USE_WAKEUP_LAT 0
@@ -239,12 +241,12 @@ static inline struct omap_device *_find_by_pdev(struct platform_device *pdev)
}
/**
- * _add_optional_clock_alias - Add clock alias for hwmod optional clocks
+ * _add_optional_clock_clkdev - Add clkdev entry for hwmod optional clocks
* @od: struct omap_device *od
*
* For every optional clock present per hwmod per omap_device, this function
- * adds an entry in the clocks list of the form <dev-id=dev_name, con-id=role>
- * if an entry is already present in it with the form <dev-id=NULL, con-id=role>
+ * adds an entry in the clkdev table of the form <dev-id=dev_name, con-id=role>
+ * if it does not exist already.
*
* The function is called from inside omap_device_build_ss(), after
* omap_device_register.
@@ -254,25 +256,39 @@ static inline struct omap_device *_find_by_pdev(struct platform_device *pdev)
*
* No return value.
*/
-static void _add_optional_clock_alias(struct omap_device *od,
+static void _add_optional_clock_clkdev(struct omap_device *od,
struct omap_hwmod *oh)
{
int i;
for (i = 0; i < oh->opt_clks_cnt; i++) {
struct omap_hwmod_opt_clk *oc;
- int r;
+ struct clk *r;
+ struct clk_lookup *l;
oc = &oh->opt_clks[i];
if (!oc->_clk)
continue;
- r = clk_add_alias(oc->role, dev_name(&od->pdev.dev),
- (char *)oc->clk, &od->pdev.dev);
- if (r)
- pr_err("omap_device: %s: clk_add_alias for %s failed\n",
+ r = clk_get_sys(dev_name(&od->pdev.dev), oc->role);
+ if (!IS_ERR(r))
+ continue; /* clkdev entry exists */
+
+ r = omap_clk_get_by_name((char *)oc->clk);
+ if (IS_ERR(r)) {
+ pr_err("omap_device: %s: omap_clk_get_by_name for %s failed\n",
+ dev_name(&od->pdev.dev), oc->clk);
+ continue;
+ }
+
+ l = clkdev_alloc(r, oc->role, dev_name(&od->pdev.dev));
+ if (!l) {
+ pr_err("omap_device: %s: clkdev_alloc for %s failed\n",
dev_name(&od->pdev.dev), oc->role);
+ return;
+ }
+ clkdev_add(l);
}
}
@@ -480,7 +496,7 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
for (i = 0; i < oh_cnt; i++) {
hwmods[i]->od = od;
- _add_optional_clock_alias(od, hwmods[i]);
+ _add_optional_clock_clkdev(od, hwmods[i]);
}
if (ret)
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index e26e504..a3f50b3 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -242,7 +242,14 @@ static void __init omap_map_sram(void)
omap_sram_size - SRAM_BOOTLOADER_SZ);
}
-void * omap_sram_push(void * start, unsigned long size)
+/*
+ * Memory allocator for SRAM: calculates the new ceiling address
+ * for pushing a function using the fncpy API.
+ *
+ * Note that fncpy requires the returned address to be aligned
+ * to an 8-byte boundary.
+ */
+void *omap_sram_push_address(unsigned long size)
{
if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
printk(KERN_ERR "Not enough space in SRAM\n");
@@ -250,10 +257,7 @@ void * omap_sram_push(void * start, unsigned long size)
}
omap_sram_ceil -= size;
- omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, sizeof(void *));
- memcpy((void *)omap_sram_ceil, start, size);
- flush_icache_range((unsigned long)omap_sram_ceil,
- (unsigned long)(omap_sram_ceil + size));
+ omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, FNCPY_ALIGN);
return (void *)omap_sram_ceil;
}
@@ -312,7 +316,7 @@ u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
}
#endif
-#ifdef CONFIG_ARCH_OMAP2420
+#ifdef CONFIG_SOC_OMAP2420
static int __init omap242x_sram_init(void)
{
_omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
@@ -333,7 +337,7 @@ static inline int omap242x_sram_init(void)
}
#endif
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
static int __init omap243x_sram_init(void)
{
_omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
@@ -405,20 +409,6 @@ static inline int omap34xx_sram_init(void)
}
#endif
-#ifdef CONFIG_ARCH_OMAP4
-static int __init omap44xx_sram_init(void)
-{
- printk(KERN_ERR "FIXME: %s not implemented\n", __func__);
-
- return -ENODEV;
-}
-#else
-static inline int omap44xx_sram_init(void)
-{
- return 0;
-}
-#endif
-
int __init omap_sram_init(void)
{
omap_detect_sram();
@@ -432,8 +422,6 @@ int __init omap_sram_init(void)
omap243x_sram_init();
else if (cpu_is_omap34xx())
omap34xx_sram_init();
- else if (cpu_is_omap44xx())
- omap44xx_sram_init();
return 0;
}