diff options
Diffstat (limited to 'arch/blackfin/mach-common/interrupt.S')
| -rw-r--r-- | arch/blackfin/mach-common/interrupt.S | 253 |
1 files changed, 253 insertions, 0 deletions
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S new file mode 100644 index 0000000..dd45664 --- /dev/null +++ b/arch/blackfin/mach-common/interrupt.S @@ -0,0 +1,253 @@ +/* + * File: arch/blackfin/mach-common/interrupt.S + * Based on: + * Author: D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca> + * Kenneth Albanowski <kjahds@kjahds.com> + * + * Created: ? + * Description: Interrupt Entries + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <asm/blackfin.h> +#include <asm/mach/irq.h> +#include <linux/autoconf.h> +#include <linux/linkage.h> +#include <asm/entry.h> +#include <asm/asm-offsets.h> + +#include <asm/mach-common/context.S> + +#ifdef CONFIG_I_ENTRY_L1 +.section .l1.text +#else +.text +#endif + +.align 4 /* just in case */ + +/* + * initial interrupt handlers + */ + +#ifndef CONFIG_KGDB + /* interrupt routine for emulation - 0 */ + /* Currently used only if GDB stub is not in - invalid */ + /* gdb-stub set the evt itself */ + /* save registers for post-mortem only */ +ENTRY(_evt_emulation) + SAVE_ALL_SYS +#ifdef CONFIG_FRAME_POINTER + fp = 0; +#endif + r0 = IRQ_EMU; + r1 = sp; + SP += -12; + call _irq_panic; + SP += 12; + /* - GDB stub fills this in by itself (if defined) */ + rte; +#endif + +/* Common interrupt entry code. First we do CLI, then push + * RETI, to keep interrupts disabled, but to allow this state to be changed + * by local_bh_enable. + * R0 contains the interrupt number, while R1 may contain the value of IPEND, + * or garbage if IPEND won't be needed by the ISR. */ +__common_int_entry: + [--sp] = fp; + [--sp] = usp; + + [--sp] = i0; + [--sp] = i1; + [--sp] = i2; + [--sp] = i3; + + [--sp] = m0; + [--sp] = m1; + [--sp] = m2; + [--sp] = m3; + + [--sp] = l0; + [--sp] = l1; + [--sp] = l2; + [--sp] = l3; + + [--sp] = b0; + [--sp] = b1; + [--sp] = b2; + [--sp] = b3; + [--sp] = a0.x; + [--sp] = a0.w; + [--sp] = a1.x; + [--sp] = a1.w; + + [--sp] = LC0; + [--sp] = LC1; + [--sp] = LT0; + [--sp] = LT1; + [--sp] = LB0; + [--sp] = LB1; + + [--sp] = ASTAT; + + [--sp] = r0; /* Skip reserved */ + [--sp] = RETS; + r2 = RETI; + [--sp] = r2; + [--sp] = RETX; + [--sp] = RETN; + [--sp] = RETE; + [--sp] = SEQSTAT; + [--sp] = r1; /* IPEND - R1 may or may not be set up before jumping here. */ + + /* Switch to other method of keeping interrupts disabled. */ +#ifdef CONFIG_DEBUG_HWERR + r1 = 0x3f; + sti r1; +#else + cli r1; +#endif + [--sp] = RETI; /* orig_pc */ + /* Clear all L registers. */ + r1 = 0 (x); + l0 = r1; + l1 = r1; + l2 = r1; + l3 = r1; +#ifdef CONFIG_FRAME_POINTER + fp = 0; +#endif + +#ifdef ANOMALY_05000283 + cc = r7 == r7; + p5.h = 0xffc0; + p5.l = 0x0014; + if cc jump 1f; + r7.l = W[p5]; +1: +#endif + r1 = sp; + SP += -12; + call _do_irq; + SP += 12; + call _return_from_int; +.Lcommon_restore_context: + RESTORE_CONTEXT + rti; + +/* interrupt routine for ivhw - 5 */ +ENTRY(_evt_ivhw) + SAVE_CONTEXT +#ifdef CONFIG_FRAME_POINTER + fp = 0; +#endif +#ifdef ANOMALY_05000283 + cc = r7 == r7; + p5.h = 0xffc0; + p5.l = 0x0014; + if cc jump 1f; + r7.l = W[p5]; +1: +#endif + p0.l = lo(TBUFCTL); + p0.h = hi(TBUFCTL); + r0 = 1; + [p0] = r0; + r0 = IRQ_HWERR; + r1 = sp; + +#ifdef CONFIG_HARDWARE_PM + r7 = SEQSTAT; + r7 = r7 >>> 0xe; + r6 = 0x1F; + r7 = r7 & r6; + r5 = 0x12; + cc = r7 == r5; + if cc jump .Lcall_do_ovf; /* deal with performance counter overflow */ +#endif + + SP += -12; + call _irq_panic; + SP += 12; + rti; +#ifdef CONFIG_HARDWARE_PM +.Lcall_do_ovf: + + SP += -12; + call _pm_overflow; + SP += 12; + + jump .Lcommon_restore_context; +#endif + +/* interrupt routine for evt2 - 2. This is NMI. */ +ENTRY(_evt_evt2) + SAVE_CONTEXT +#ifdef CONFIG_FRAME_POINTER + fp = 0; +#endif +#ifdef ANOMALY_05000283 + cc = r7 == r7; + p5.h = 0xffc0; + p5.l = 0x0014; + if cc jump 1f; + r7.l = W[p5]; +1: +#endif + r0 = IRQ_NMI; + r1 = sp; + SP += -12; + call _asm_do_IRQ; + SP += 12; + RESTORE_CONTEXT + rtn; + +/* interrupt routine for core timer - 6 */ +ENTRY(_evt_timer) + TIMER_INTERRUPT_ENTRY(EVT_IVTMR_P) + +/* interrupt routine for evt7 - 7 */ +ENTRY(_evt_evt7) + INTERRUPT_ENTRY(EVT_IVG7_P) +ENTRY(_evt_evt8) + INTERRUPT_ENTRY(EVT_IVG8_P) +ENTRY(_evt_evt9) + INTERRUPT_ENTRY(EVT_IVG9_P) +ENTRY(_evt_evt10) + INTERRUPT_ENTRY(EVT_IVG10_P) +ENTRY(_evt_evt11) + INTERRUPT_ENTRY(EVT_IVG11_P) +ENTRY(_evt_evt12) + INTERRUPT_ENTRY(EVT_IVG12_P) +ENTRY(_evt_evt13) + INTERRUPT_ENTRY(EVT_IVG13_P) + + + /* interrupt routine for system_call - 15 */ +ENTRY(_evt_system_call) + SAVE_CONTEXT_SYSCALL +#ifdef CONFIG_FRAME_POINTER + fp = 0; +#endif + call _system_call; + jump .Lcommon_restore_context; |