diff options
Diffstat (limited to 'arch/cris')
25 files changed, 54 insertions, 260 deletions
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index 17addac..408b055 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -282,8 +282,8 @@ config ETRAX_RTC Enables drivers for the Real-Time Clock battery-backed chips on some products. The kernel reads the time when booting, and the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a - rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc - device. You can check the time with cat /proc/rtc, but + rtc_time struct (see <file:arch/cris/include/asm/rtc.h>) on the + /dev/rtc device. You can check the time with cat /proc/rtc, but normal time reading should be done using libc function time and friends. diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig index adc164e..df9a38b 100644 --- a/arch/cris/arch-v10/Kconfig +++ b/arch/cris/arch-v10/Kconfig @@ -24,8 +24,8 @@ config ETRAX_PA_LEDS help The ETRAX network driver is responsible for flashing LED's when packets arrive and are sent. It uses macros defined in - <file:include/asm-cris/io.h>, and those macros are defined after what - YOU choose in this option. The actual bits used are configured + <file:arch/cris/include/asm/io.h>, and those macros are defined after + what YOU choose in this option. The actual bits used are configured separately. Select this if the LEDs are on port PA. Some products put the leds on PB or a memory-mapped latch (CSP0) instead. @@ -34,8 +34,8 @@ config ETRAX_PB_LEDS help The ETRAX network driver is responsible for flashing LED's when packets arrive and are sent. It uses macros defined in - <file:include/asm-cris/io.h>, and those macros are defined after what - YOU choose in this option. The actual bits used are configured + <file:arch/cris/include/asm/io.h>, and those macros are defined after + what YOU choose in this option. The actual bits used are configured separately. Select this if the LEDs are on port PB. Some products put the leds on PA or a memory-mapped latch (CSP0) instead. @@ -44,8 +44,8 @@ config ETRAX_CSP0_LEDS help The ETRAX network driver is responsible for flashing LED's when packets arrive and are sent. It uses macros defined in - <file:include/asm-cris/io.h>, and those macros are defined after what - YOU choose in this option. The actual bits used are configured + <file:arch/cris/include/asm/io.h>, and those macros are defined after + what YOU choose in this option. The actual bits used are configured separately. Select this if the LEDs are on a memory-mapped latch using chip select CSP0, this is mapped at 0x90000000. Some products put the leds on PA or PB instead. diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig index 0d72217..5f2cdb3 100644 --- a/arch/cris/arch-v10/drivers/Kconfig +++ b/arch/cris/arch-v10/drivers/Kconfig @@ -3,7 +3,8 @@ if ETRAX_ARCH_V10 config ETRAX_ETHERNET bool "Ethernet support" depends on ETRAX_ARCH_V10 - select NET_ETHERNET + select ETHERNET + select NET_CORE select MII help This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S index 1161883..592fbe9 100644 --- a/arch/cris/arch-v10/kernel/entry.S +++ b/arch/cris/arch-v10/kernel/entry.S @@ -771,7 +771,7 @@ sys_call_table: .long sys_ni_syscall /* sys_vm86 */ .long sys_ni_syscall /* Old sys_query_module */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* old nfsservctl */ .long sys_setresgid16 /* 170 */ .long sys_getresgid16 .long sys_prctl diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c index b9f9c8c..b579dd0 100644 --- a/arch/cris/arch-v10/kernel/kgdb.c +++ b/arch/cris/arch-v10/kernel/kgdb.c @@ -694,7 +694,7 @@ mem2hex(char *buf, unsigned char *mem, int count) /* Valid mem address. */ for (i = 0; i < count; i++) { ch = *mem++; - buf = pack_hex_byte(buf, ch); + buf = hex_byte_pack(buf, ch); } } @@ -868,7 +868,7 @@ stub_is_stopped(int sigval) /* Send trap type (converted to signal) */ *ptr++ = 'T'; - ptr = pack_hex_byte(ptr, sigval); + ptr = hex_byte_pack(ptr, sigval); /* Send register contents. We probably only need to send the * PC, frame pointer and stack pointer here. Other registers will be @@ -881,7 +881,7 @@ stub_is_stopped(int sigval) status = read_register (regno, ®_cont); if (status == SUCCESS) { - ptr = pack_hex_byte(ptr, regno); + ptr = hex_byte_pack(ptr, regno); *ptr++ = ':'; ptr = mem2hex(ptr, (unsigned char *)®_cont, diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index 41a2732..de43aad 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -3,7 +3,8 @@ if ETRAX_ARCH_V32 config ETRAX_ETHERNET bool "Ethernet support" depends on ETRAX_ARCH_V32 - select NET_ETHERNET + select ETHERNET + select NET_CORE select MII help This option enables the ETRAX FS built-in 10/100Mbit Ethernet diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c index c03bc3b..642c6fe 100644 --- a/arch/cris/arch-v32/drivers/cryptocop.c +++ b/arch/cris/arch-v32/drivers/cryptocop.c @@ -16,7 +16,7 @@ #include <asm/uaccess.h> #include <asm/io.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <linux/list.h> #include <linux/interrupt.h> diff --git a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c index f58f2c1..7fb5212 100644 --- a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c +++ b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c @@ -163,7 +163,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void) this->ecc.mode = NAND_ECC_SOFT; /* Enable the following for a flash based bad block table */ - /* this->options = NAND_USE_FLASH_BBT; */ + /* this->bbt_options = NAND_BBT_USE_FLASH; */ /* Scan to find existence of the device */ if (nand_scan(crisv32_mtd, 1)) { diff --git a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c index d5b0cc9..e032384 100644 --- a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c +++ b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c @@ -154,7 +154,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void) this->ecc.mode = NAND_ECC_SOFT; /* Enable the following for a flash based bad block table */ - /* this->options = NAND_USE_FLASH_BBT; */ + /* this->bbt_options = NAND_BBT_USE_FLASH; */ /* Scan to find existence of the device */ if (nand_scan(crisv32_mtd, 1)) { diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S index 84fed7e..c3ea469 100644 --- a/arch/cris/arch-v32/kernel/entry.S +++ b/arch/cris/arch-v32/kernel/entry.S @@ -714,7 +714,7 @@ sys_call_table: .long sys_ni_syscall /* sys_vm86 */ .long sys_ni_syscall /* Old sys_query_module */ .long sys_poll - .long sys_nfsservctl + .long sys_ni_syscall /* Old nfsservctl */ .long sys_setresgid16 /* 170 */ .long sys_getresgid16 .long sys_prctl diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c index c0343c3..8c1d35c 100644 --- a/arch/cris/arch-v32/kernel/kgdb.c +++ b/arch/cris/arch-v32/kernel/kgdb.c @@ -677,7 +677,7 @@ mem2hex(char *buf, unsigned char *mem, int count) /* Valid mem address. */ for (i = 0; i < count; i++) { ch = *mem++; - buf = pack_hex_byte(buf, ch); + buf = hex_byte_pack(buf, ch); } } /* Terminate properly. */ @@ -695,7 +695,7 @@ mem2hex_nbo(char *buf, unsigned char *mem, int count) mem += count - 1; for (i = 0; i < count; i++) { ch = *mem--; - buf = pack_hex_byte(buf, ch); + buf = hex_byte_pack(buf, ch); } /* Terminate properly. */ @@ -880,7 +880,7 @@ stub_is_stopped(int sigval) /* Send trap type (converted to signal) */ *ptr++ = 'T'; - ptr = pack_hex_byte(ptr, sigval); + ptr = hex_byte_pack(ptr, sigval); if (((reg.exs & 0xff00) >> 8) == 0xc) { @@ -988,26 +988,26 @@ stub_is_stopped(int sigval) } /* Only send PC, frame and stack pointer. */ read_register(PC, ®_cont); - ptr = pack_hex_byte(ptr, PC); + ptr = hex_byte_pack(ptr, PC); *ptr++ = ':'; ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[PC]); *ptr++ = ';'; read_register(R8, ®_cont); - ptr = pack_hex_byte(ptr, R8); + ptr = hex_byte_pack(ptr, R8); *ptr++ = ':'; ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[R8]); *ptr++ = ';'; read_register(SP, ®_cont); - ptr = pack_hex_byte(ptr, SP); + ptr = hex_byte_pack(ptr, SP); *ptr++ = ':'; ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[SP]); *ptr++ = ';'; /* Send ERP as well; this will save us an entire register fetch in some cases. */ read_register(ERP, ®_cont); - ptr = pack_hex_byte(ptr, ERP); + ptr = hex_byte_pack(ptr, ERP); *ptr++ = ':'; ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[ERP]); *ptr++ = ';'; diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c index a0843a7..0b99df7 100644 --- a/arch/cris/arch-v32/kernel/smp.c +++ b/arch/cris/arch-v32/kernel/smp.c @@ -7,7 +7,7 @@ #include <asm/mmu_context.h> #include <hwregs/asm/mmu_defs_asm.h> #include <hwregs/supp_reg.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <linux/err.h> #include <linux/init.h> diff --git a/arch/cris/arch-v32/lib/nand_init.S b/arch/cris/arch-v32/lib/nand_init.S deleted file mode 100644 index d671fed..0000000 --- a/arch/cris/arch-v32/lib/nand_init.S +++ /dev/null @@ -1,178 +0,0 @@ -##============================================================================= -## -## nand_init.S -## -## The bootrom copies data from the NAND flash to the internal RAM but -## due to a bug/feature we can only trust the 256 first bytes. So this -## code copies more data from NAND flash to internal RAM. Obvioulsy this -## code must fit in the first 256 bytes so alter with care. -## -## Some notes about the bug/feature for future reference: -## The bootrom copies the first 127 KB from NAND flash to internal -## memory. The problem is that it does a bytewise copy. NAND flashes -## does autoincrement on the address so for a 16-bite device each -## read/write increases the address by two. So the copy loop in the -## bootrom will discard every second byte. This is solved by inserting -## zeroes in every second byte in the first erase block. -## -## The bootrom also incorrectly assumes that it can read the flash -## linear with only one read command but the flash will actually -## switch between normal area and spare area if you do that so we -## can't trust more than the first 256 bytes. -## -##============================================================================= - -#include <arch/hwregs/asm/reg_map_asm.h> -#include <arch/hwregs/asm/gio_defs_asm.h> -#include <arch/hwregs/asm/pinmux_defs_asm.h> -#include <arch/hwregs/asm/bif_core_defs_asm.h> -#include <arch/hwregs/asm/config_defs_asm.h> - -;; There are 8-bit NAND flashes and 16-bit NAND flashes. -;; We need to treat them slightly different. -#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 -#define PAGE_SIZE 256 -#else -#error 2 -#define PAGE_SIZE 512 -#endif -#define ERASE_BLOCK 16384 - -;; GPIO pins connected to NAND flash -#define CE 4 -#define CLE 5 -#define ALE 6 -#define BY 7 - -;; Address space for NAND flash -#define NAND_RD_ADDR 0x90000000 -#define NAND_WR_ADDR 0x94000000 - -#define READ_CMD 0x00 - -;; Readability macros -#define CSP_MASK \ - REG_MASK(bif_core, rw_grp3_cfg, gated_csp0) | \ - REG_MASK(bif_core, rw_grp3_cfg, gated_csp1) -#define CSP_VAL \ - REG_STATE(bif_core, rw_grp3_cfg, gated_csp0, rd) | \ - REG_STATE(bif_core, rw_grp3_cfg, gated_csp1, wr) - -;;---------------------------------------------------------------------------- -;; Macros to set/clear GPIO bits - -.macro SET x - or.b (1<<\x),$r9 - move.d $r9, [$r2] -.endm - -.macro CLR x - and.b ~(1<<\x),$r9 - move.d $r9, [$r2] -.endm - -;;---------------------------------------------------------------------------- - -nand_boot: - ;; Check if nand boot was selected - move.d REG_ADDR(config, regi_config, r_bootsel), $r0 - move.d [$r0], $r0 - and.d REG_MASK(config, r_bootsel, boot_mode), $r0 - cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0 - bne normal_boot ; No NAND boot - nop - -copy_nand_to_ram: - ;; copy_nand_to_ram - ;; Arguments - ;; r10 - destination - ;; r11 - source offset - ;; r12 - size - ;; r13 - Address to jump to after completion - ;; Note : r10-r12 are clobbered on return - ;; Registers used: - ;; r0 - NAND_RD_ADDR - ;; r1 - NAND_WR_ADDR - ;; r2 - reg_gio_rw_pa_dout - ;; r3 - reg_gio_r_pa_din - ;; r4 - tmp - ;; r5 - byte counter within a page - ;; r6 - reg_pinmux_rw_pa - ;; r7 - reg_gio_rw_pa_oe - ;; r8 - reg_bif_core_rw_grp3_cfg - ;; r9 - reg_gio_rw_pa_dout shadow - move.d 0x90000000, $r0 - move.d 0x94000000, $r1 - move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r2 - move.d REG_ADDR(gio, regi_gio, r_pa_din), $r3 - move.d REG_ADDR(pinmux, regi_pinmux, rw_pa), $r6 - move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r7 - move.d REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg), $r8 - -#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 - lsrq 1, $r11 -#endif - ;; Set up GPIO - move.d [$r2], $r9 - move.d [$r7], $r4 - or.b (1<<ALE) | (1 << CLE) | (1<<CE), $r4 - move.d $r4, [$r7] - - ;; Set up bif - move.d [$r8], $r4 - and.d CSP_MASK, $r4 - or.d CSP_VAL, $r4 - move.d $r4, [$r8] - -1: ;; Copy one page - CLR CE - SET CLE - moveq READ_CMD, $r4 - move.b $r4, [$r1] - moveq 20, $r4 -2: bne 2b - subq 1, $r4 - CLR CLE - SET ALE - clear.w [$r1] ; Column address = 0 - move.d $r11, $r4 - lsrq 8, $r4 - move.b $r4, [$r1] ; Row address - lsrq 8, $r4 - move.b $r4, [$r1] ; Row address - moveq 20, $r4 -2: bne 2b - subq 1, $r4 - CLR ALE -2: move.d [$r3], $r4 - and.d 1 << BY, $r4 - beq 2b - movu.w PAGE_SIZE, $r5 -2: ; Copy one byte/word -#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 - move.w [$r0], $r4 -#else - move.b [$r0], $r4 -#endif - subq 1, $r5 - bne 2b -#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 - move.w $r4, [$r10+] - subu.w PAGE_SIZE*2, $r12 -#else - move.b $r4, [$r10+] - subu.w PAGE_SIZE, $r12 -#endif - bpl 1b - addu.w PAGE_SIZE, $r11 - - ;; End of copy - jump $r13 - nop - - ;; This will warn if the code above is too large. If you consider - ;; to remove this you don't understand the bug/feature. - .org 256 - .org ERASE_BLOCK - -normal_boot: diff --git a/arch/cris/arch-v32/mach-a3/pinmux.c b/arch/cris/arch-v32/mach-a3/pinmux.c index 18648ef..591f775 100644 --- a/arch/cris/arch-v32/mach-a3/pinmux.c +++ b/arch/cris/arch-v32/mach-a3/pinmux.c @@ -85,6 +85,8 @@ crisv32_pinmux_alloc_fixed(enum fixed_function function) int ret = -EINVAL; char saved[sizeof pins]; unsigned long flags; + reg_pinmux_rw_hwprot hwprot; + reg_clkgen_rw_clk_ctrl clk_ctrl; spin_lock_irqsave(&pinmux_lock, flags); @@ -93,9 +95,8 @@ crisv32_pinmux_alloc_fixed(enum fixed_function function) crisv32_pinmux_init(); /* must be done before we read rw_hwprot */ - reg_pinmux_rw_hwprot hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); - reg_clkgen_rw_clk_ctrl clk_ctrl = REG_RD(clkgen, regi_clkgen, - rw_clk_ctrl); + hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); + clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl); switch (function) { case pinmux_eth: @@ -262,6 +263,7 @@ crisv32_pinmux_dealloc_fixed(enum fixed_function function) int ret = -EINVAL; char saved[sizeof pins]; unsigned long flags; + reg_pinmux_rw_hwprot hwprot; spin_lock_irqsave(&pinmux_lock, flags); @@ -270,7 +272,7 @@ crisv32_pinmux_dealloc_fixed(enum fixed_function function) crisv32_pinmux_init(); /* must be done before we read rw_hwprot */ - reg_pinmux_rw_hwprot hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); + hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); switch (function) { case pinmux_eth: diff --git a/arch/cris/include/arch-v10/arch/processor.h b/arch/cris/include/arch-v10/arch/processor.h index cc692c7..93feb2a 100644 --- a/arch/cris/include/arch-v10/arch/processor.h +++ b/arch/cris/include/arch-v10/arch/processor.h @@ -53,7 +53,6 @@ struct thread_struct { */ #define start_thread(regs, ip, usp) do { \ - set_fs(USER_DS); \ regs->irp = ip; \ regs->dccr |= 1 << U_DCCR_BITNR; \ wrusp(usp); \ diff --git a/arch/cris/include/arch-v10/arch/ptrace.h b/arch/cris/include/arch-v10/arch/ptrace.h index 2f464ea..1a23273 100644 --- a/arch/cris/include/arch-v10/arch/ptrace.h +++ b/arch/cris/include/arch-v10/arch/ptrace.h @@ -112,7 +112,6 @@ struct switch_stack { #define user_mode(regs) (((regs)->dccr & 0x100) != 0) #define instruction_pointer(regs) ((regs)->irp) #define profile_pc(regs) instruction_pointer(regs) -extern void show_regs(struct pt_regs *); #endif /* __KERNEL__ */ diff --git a/arch/cris/include/arch-v32/arch/processor.h b/arch/cris/include/arch-v32/arch/processor.h index f80b477..9603c90 100644 --- a/arch/cris/include/arch-v32/arch/processor.h +++ b/arch/cris/include/arch-v32/arch/processor.h @@ -47,7 +47,6 @@ struct thread_struct { */ #define start_thread(regs, ip, usp) \ do { \ - set_fs(USER_DS); \ regs->erp = ip; \ regs->ccs |= 1 << (U_CCS_BITNR + CCS_SHIFT); \ wrusp(usp); \ diff --git a/arch/cris/include/arch-v32/arch/ptrace.h b/arch/cris/include/arch-v32/arch/ptrace.h index ffca8d0..19773d3 100644 --- a/arch/cris/include/arch-v32/arch/ptrace.h +++ b/arch/cris/include/arch-v32/arch/ptrace.h @@ -111,7 +111,6 @@ struct switch_stack { #define arch_has_single_step() (1) #define user_mode(regs) (((regs)->ccs & (1 << (U_CCS_BITNR + CCS_SHIFT))) != 0) #define instruction_pointer(regs) ((regs)->erp) -extern void show_regs(struct pt_regs *); #define profile_pc(regs) instruction_pointer(regs) #endif /* __KERNEL__ */ diff --git a/arch/cris/include/asm/atomic.h b/arch/cris/include/asm/atomic.h index 88dc9b9..bbf0938 100644 --- a/arch/cris/include/asm/atomic.h +++ b/arch/cris/include/asm/atomic.h @@ -138,7 +138,7 @@ static inline int atomic_cmpxchg(atomic_t *v, int old, int new) #define atomic_xchg(v, new) (xchg(&((v)->counter), new)) -static inline int atomic_add_unless(atomic_t *v, int a, int u) +static inline int __atomic_add_unless(atomic_t *v, int a, int u) { int ret; unsigned long flags; @@ -148,9 +148,8 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) if (ret != u) v->counter += a; cris_atomic_restore(v, flags); - return ret != u; + return ret; } -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) /* Atomic operations are already serializing */ #define smp_mb__before_atomic_dec() barrier() @@ -158,5 +157,4 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) #define smp_mb__before_atomic_inc() barrier() #define smp_mb__after_atomic_inc() barrier() -#include <asm-generic/atomic-long.h> #endif diff --git a/arch/cris/include/asm/bitops.h b/arch/cris/include/asm/bitops.h index 310e0de..a78a2d7 100644 --- a/arch/cris/include/asm/bitops.h +++ b/arch/cris/include/asm/bitops.h @@ -20,7 +20,7 @@ #include <arch/bitops.h> #include <asm/system.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <linux/compiler.h> /* @@ -156,8 +156,7 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr) #include <asm-generic/bitops/le.h> -#define ext2_set_bit_atomic(l,n,a) test_and_set_bit(n,a) -#define ext2_clear_bit_atomic(l,n,a) test_and_clear_bit(n,a) +#include <asm-generic/bitops/ext2-atomic-setbit.h> #include <asm-generic/bitops/sched.h> diff --git a/arch/cris/include/asm/io.h b/arch/cris/include/asm/io.h index ac12ae2..db9a16c 100644 --- a/arch/cris/include/asm/io.h +++ b/arch/cris/include/asm/io.h @@ -3,6 +3,7 @@ #include <asm/page.h> /* for __va, __pa */ #include <arch/io.h> +#include <asm-generic/iomap.h> #include <linux/kernel.h> struct cris_io_operations diff --git a/arch/cris/include/asm/serial.h b/arch/cris/include/asm/serial.h new file mode 100644 index 0000000..af7535a --- /dev/null +++ b/arch/cris/include/asm/serial.h @@ -0,0 +1,9 @@ +#ifndef _ASM_SERIAL_H +#define _ASM_SERIAL_H + +/* + * This assumes you have a 1.8432 MHz clock for your UART. + */ +#define BASE_BAUD (1843200 / 16) + +#endif /* _ASM_SERIAL_H */ diff --git a/arch/cris/kernel/module.c b/arch/cris/kernel/module.c index bcd502f..37400f5 100644 --- a/arch/cris/kernel/module.c +++ b/arch/cris/kernel/module.c @@ -30,45 +30,19 @@ #endif #ifdef CONFIG_ETRAX_KMALLOCED_MODULES -#define MALLOC_MODULE(size) kmalloc(size, GFP_KERNEL) -#define FREE_MODULE(region) kfree(region) -#else -#define MALLOC_MODULE(size) vmalloc_exec(size) -#define FREE_MODULE(region) vfree(region) -#endif - void *module_alloc(unsigned long size) { if (size == 0) return NULL; - return MALLOC_MODULE(size); + return kmalloc(size, GFP_KERNEL); } - /* Free memory returned from module_alloc */ void module_free(struct module *mod, void *module_region) { - FREE_MODULE(module_region); -} - -/* We don't need anything special. */ -int module_frob_arch_sections(Elf_Ehdr *hdr, - Elf_Shdr *sechdrs, - char *secstrings, - struct module *mod) -{ - return 0; -} - -int apply_relocate(Elf32_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *me) -{ - printk(KERN_ERR "module %s: REL relocation unsupported\n", me->name); - return -ENOEXEC; + kfree(module_region); } +#endif int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, @@ -108,14 +82,3 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, return 0; } - -int module_finalize(const Elf_Ehdr *hdr, - const Elf_Shdr *sechdrs, - struct module *me) -{ - return 0; -} - -void module_arch_cleanup(struct module *mod) -{ -} diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c index c99aeab..aa585e4 100644 --- a/arch/cris/kernel/process.c +++ b/arch/cris/kernel/process.c @@ -12,7 +12,7 @@ * This file handles the architecture-dependent parts of process handling.. */ -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/pgtable.h> #include <asm/uaccess.h> #include <asm/irq.h> diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c index 9dcac8e..280c8ea 100644 --- a/arch/cris/mm/fault.c +++ b/arch/cris/mm/fault.c @@ -166,6 +166,8 @@ do_page_fault(unsigned long address, struct pt_regs *regs, if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; + else if (fault & VM_FAULT_SIGSEGV) + goto bad_area; else if (fault & VM_FAULT_SIGBUS) goto do_sigbus; BUG(); |