diff options
Diffstat (limited to 'arch/hexagon')
-rw-r--r-- | arch/hexagon/include/asm/io.h | 326 | ||||
-rw-r--r-- | arch/hexagon/lib/io.c | 91 |
2 files changed, 417 insertions, 0 deletions
diff --git a/arch/hexagon/include/asm/io.h b/arch/hexagon/include/asm/io.h new file mode 100644 index 0000000..b3acc2c --- /dev/null +++ b/arch/hexagon/include/asm/io.h @@ -0,0 +1,326 @@ +/* + * IO definitions for the Hexagon architecture + * + * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef _ASM_IO_H +#define _ASM_IO_H + +#ifdef __KERNEL__ + +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/vmalloc.h> +#include <asm/string.h> +#include <asm/mem-layout.h> +#include <asm/iomap.h> +#include <asm/page.h> +#include <asm/cacheflush.h> +#include <asm/tlbflush.h> + +/* + * We don't have PCI yet. + * _IO_BASE is pointing at what should be unused virtual space. + */ +#define IO_SPACE_LIMIT 0xffff +#define _IO_BASE ((void __iomem *)0xfe000000) + +extern int remap_area_pages(unsigned long start, unsigned long phys_addr, + unsigned long end, unsigned long flags); + +extern void __iounmap(const volatile void __iomem *addr); + +/* Defined in lib/io.c, needed for smc91x driver. */ +extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen); +extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen); + +extern void __raw_readsl(const void __iomem *addr, void *data, int wordlen); +extern void __raw_writesl(void __iomem *addr, const void *data, int wordlen); + +#define readsw(p, d, l) __raw_readsw(p, d, l) +#define writesw(p, d, l) __raw_writesw(p, d, l) + +#define readsl(p, d, l) __raw_readsl(p, d, l) +#define writesl(p, d, l) __raw_writesl(p, d, l) + +/* + * virt_to_phys - map virtual address to physical + * @address: address to map + */ +static inline unsigned long virt_to_phys(volatile void *address) +{ + return __pa(address); +} + +/* + * phys_to_virt - map physical address to virtual + * @address: address to map + */ +static inline void *phys_to_virt(unsigned long address) +{ + return __va(address); +} + +/* + * convert a physical pointer to a virtual kernel pointer for + * /dev/mem access. + */ +#define xlate_dev_kmem_ptr(p) __va(p) +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * IO port access primitives. Hexagon doesn't have special IO access + * instructions; all I/O is memory mapped. + * + * in/out are used for "ports", but we don't have "port instructions", + * so these are really just memory mapped too. + */ + +/* + * readb - read byte from memory mapped device + * @addr: pointer to memory + * + * Operates on "I/O bus memory space" + */ +static inline u8 readb(const volatile void __iomem *addr) +{ + u8 val; + asm volatile( + "%0 = memb(%1);" + : "=&r" (val) + : "r" (addr) + ); + return val; +} + +static inline u16 readw(const volatile void __iomem *addr) +{ + u16 val; + asm volatile( + "%0 = memh(%1);" + : "=&r" (val) + : "r" (addr) + ); + return val; +} + +static inline u32 readl(const volatile void __iomem *addr) +{ + u32 val; + asm volatile( + "%0 = memw(%1);" + : "=&r" (val) + : "r" (addr) + ); + return val; +} + +/* + * writeb - write a byte to a memory location + * @data: data to write to + * @addr: pointer to memory + * + */ +static inline void writeb(u8 data, volatile void __iomem *addr) +{ + asm volatile( + "memb(%0) = %1;" + : + : "r" (addr), "r" (data) + : "memory" + ); +} + +static inline void writew(u16 data, volatile void __iomem *addr) +{ + asm volatile( + "memh(%0) = %1;" + : + : "r" (addr), "r" (data) + : "memory" + ); + +} + +static inline void writel(u32 data, volatile void __iomem *addr) +{ + asm volatile( + "memw(%0) = %1;" + : + : "r" (addr), "r" (data) + : "memory" + ); +} + +#define __raw_writeb writeb +#define __raw_writew writew +#define __raw_writel writel + +#define __raw_readb readb +#define __raw_readw readw +#define __raw_readl readl + +/* + * Need an mtype somewhere in here, for cache type deals? + * This is probably too long for an inline. + */ +void __iomem *ioremap_nocache(unsigned long phys_addr, unsigned long size); + +static inline void __iomem *ioremap(unsigned long phys_addr, unsigned long size) +{ + return ioremap_nocache(phys_addr, size); +} + +static inline void iounmap(volatile void __iomem *addr) +{ + __iounmap(addr); +} + +#define __raw_writel writel + +static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, + int count) +{ + memcpy(dst, (void *) src, count); +} + +static inline void memcpy_toio(volatile void __iomem *dst, const void *src, + int count) +{ + memcpy((void *) dst, src, count); +} + +#define PCI_IO_ADDR (volatile void __iomem *) + +/* + * inb - read byte from I/O port or something + * @port: address in I/O space + * + * Operates on "I/O bus I/O space" + */ +static inline u8 inb(unsigned long port) +{ + return readb(_IO_BASE + (port & IO_SPACE_LIMIT)); +} + +static inline u16 inw(unsigned long port) +{ + return readw(_IO_BASE + (port & IO_SPACE_LIMIT)); +} + +static inline u32 inl(unsigned long port) +{ + return readl(_IO_BASE + (port & IO_SPACE_LIMIT)); +} + +/* + * outb - write a byte to a memory location + * @data: data to write to + * @addr: address in I/O space + */ +static inline void outb(u8 data, unsigned long port) +{ + writeb(data, _IO_BASE + (port & IO_SPACE_LIMIT)); +} + +static inline void outw(u16 data, unsigned long port) +{ + writew(data, _IO_BASE + (port & IO_SPACE_LIMIT)); +} + +static inline void outl(u32 data, unsigned long port) +{ + writel(data, _IO_BASE + (port & IO_SPACE_LIMIT)); +} + +#define outb_p outb +#define outw_p outw +#define outl_p outl + +#define inb_p inb +#define inw_p inw +#define inl_p inl + +static inline void insb(unsigned long port, void *buffer, int count) +{ + if (count) { + u8 *buf = buffer; + do { + u8 x = inb(port); + *buf++ = x; + } while (--count); + } +} + +static inline void insw(unsigned long port, void *buffer, int count) +{ + if (count) { + u16 *buf = buffer; + do { + u16 x = inw(port); + *buf++ = x; + } while (--count); + } +} + +static inline void insl(unsigned long port, void *buffer, int count) +{ + if (count) { + u32 *buf = buffer; + do { + u32 x = inw(port); + *buf++ = x; + } while (--count); + } +} + +static inline void outsb(unsigned long port, const void *buffer, int count) +{ + if (count) { + const u8 *buf = buffer; + do { + outb(*buf++, port); + } while (--count); + } +} + +static inline void outsw(unsigned long port, const void *buffer, int count) +{ + if (count) { + const u16 *buf = buffer; + do { + outw(*buf++, port); + } while (--count); + } +} + +static inline void outsl(unsigned long port, const void *buffer, int count) +{ + if (count) { + const u32 *buf = buffer; + do { + outl(*buf++, port); + } while (--count); + } +} + +#define flush_write_buffers() do { } while (0) + +#endif /* __KERNEL__ */ + +#endif diff --git a/arch/hexagon/lib/io.c b/arch/hexagon/lib/io.c new file mode 100644 index 0000000..8ae47ba --- /dev/null +++ b/arch/hexagon/lib/io.c @@ -0,0 +1,91 @@ +/* + * I/O access functions for Hexagon + * + * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include <asm/io.h> + +/* These are all FIFO routines! */ + +/* + * __raw_readsw - read words a short at a time + * @addr: source address + * @data: data address + * @len: number of shorts to read + */ +void __raw_readsw(const void __iomem *addr, void *data, int len) +{ + const volatile short int *src = (short int *) addr; + short int *dst = (short int *) data; + + if ((u32)data & 0x1) + panic("unaligned pointer to readsw"); + + while (len-- > 0) + *dst++ = *src; + +} + +/* + * __raw_writesw - read words a short at a time + * @addr: source address + * @data: data address + * @len: number of shorts to read + */ +void __raw_writesw(void __iomem *addr, const void *data, int len) +{ + const short int *src = (short int *)data; + volatile short int *dst = (short int *)addr; + + if ((u32)data & 0x1) + panic("unaligned pointer to writesw"); + + while (len-- > 0) + *dst = *src++; + + +} + +/* Pretty sure len is pre-adjusted for the length of the access already */ +void __raw_readsl(const void __iomem *addr, void *data, int len) +{ + const volatile long *src = (long *) addr; + long *dst = (long *) data; + + if ((u32)data & 0x3) + panic("unaligned pointer to readsl"); + + while (len-- > 0) + *dst++ = *src; + + +} + +void __raw_writesl(void __iomem *addr, const void *data, int len) +{ + const long *src = (long *)data; + volatile long *dst = (long *)addr; + + if ((u32)data & 0x3) + panic("unaligned pointer to writesl"); + + while (len-- > 0) + *dst = *src++; + + +} |