aboutsummaryrefslogtreecommitdiffstats
path: root/arch/m68knommu/platform/coldfire/head.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/m68knommu/platform/coldfire/head.S')
-rw-r--r--arch/m68knommu/platform/coldfire/head.S222
1 files changed, 222 insertions, 0 deletions
diff --git a/arch/m68knommu/platform/coldfire/head.S b/arch/m68knommu/platform/coldfire/head.S
new file mode 100644
index 0000000..b9aa0ca
--- /dev/null
+++ b/arch/m68knommu/platform/coldfire/head.S
@@ -0,0 +1,222 @@
+/*****************************************************************************/
+
+/*
+ * head.S -- common startup code for ColdFire CPUs.
+ *
+ * (C) Copyright 1999-2006, Greg Ungerer <gerg@snapgear.com>.
+ */
+
+/*****************************************************************************/
+
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/coldfire.h>
+#include <asm/mcfcache.h>
+#include <asm/mcfsim.h>
+
+/*****************************************************************************/
+
+/*
+ * If we don't have a fixed memory size, then lets build in code
+ * to auto detect the DRAM size. Obviously this is the prefered
+ * method, and should work for most boards. It won't work for those
+ * that do not have their RAM starting at address 0, and it only
+ * works on SDRAM (not boards fitted with SRAM).
+ */
+#if CONFIG_RAMSIZE != 0
+.macro GET_MEM_SIZE
+ movel #CONFIG_RAMSIZE,%d0 /* hard coded memory size */
+.endm
+
+#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+ defined(CONFIG_M5249) || defined(CONFIG_M527x) || \
+ defined(CONFIG_M528x) || defined(CONFIG_M5307) || \
+ defined(CONFIG_M5407)
+/*
+ * Not all these devices have exactly the same DRAM controller,
+ * but the DCMR register is virtually identical - give or take
+ * a couple of bits. The only exception is the 5272 devices, their
+ * DRAM controller is quite different.
+ */
+.macro GET_MEM_SIZE
+ movel MCF_MBAR+MCFSIM_DMR0,%d0 /* get mask for 1st bank */
+ btst #0,%d0 /* check if region enabled */
+ beq 1f
+ andl #0xfffc0000,%d0
+ beq 1f
+ addl #0x00040000,%d0 /* convert mask to size */
+1:
+ movel MCF_MBAR+MCFSIM_DMR1,%d1 /* get mask for 2nd bank */
+ btst #0,%d1 /* check if region enabled */
+ beq 2f
+ andl #0xfffc0000, %d1
+ beq 2f
+ addl #0x00040000,%d1
+ addl %d1,%d0 /* total mem size in d0 */
+2:
+.endm
+
+#elif defined(CONFIG_M5272)
+.macro GET_MEM_SIZE
+ movel MCF_MBAR+MCFSIM_CSOR7,%d0 /* get SDRAM address mask */
+ andil #0xfffff000,%d0 /* mask out chip select options */
+ negl %d0 /* negate bits */
+.endm
+
+#elif defined(CONFIG_M520x)
+.macro GET_MEM_SIZE
+ clrl %d0
+ movel MCF_MBAR+MCFSIM_SDCS0, %d2 /* Get SDRAM chip select 0 config */
+ andl #0x1f, %d2 /* Get only the chip select size */
+ beq 3f /* Check if it is enabled */
+ addql #1, %d2 /* Form exponent */
+ moveql #1, %d0
+ lsll %d2, %d0 /* 2 ^ exponent */
+3:
+ movel MCF_MBAR+MCFSIM_SDCS1, %d2 /* Get SDRAM chip select 1 config */
+ andl #0x1f, %d2 /* Get only the chip select size */
+ beq 4f /* Check if it is enabled */
+ addql #1, %d2 /* Form exponent */
+ moveql #1, %d1
+ lsll %d2, %d1 /* 2 ^ exponent */
+ addl %d1, %d0 /* Total size of SDRAM in d0 */
+4:
+.endm
+
+#else
+#error "ERROR: I don't know how to probe your boards memory size?"
+#endif
+
+/*****************************************************************************/
+
+/*
+ * Boards and platforms can do specific early hardware setup if
+ * they need to. Most don't need this, define away if not required.
+ */
+#ifndef PLATFORM_SETUP
+#define PLATFORM_SETUP
+#endif
+
+/*****************************************************************************/
+
+.global _start
+.global _rambase
+.global _ramvec
+.global _ramstart
+.global _ramend
+
+/*****************************************************************************/
+
+.data
+
+/*
+ * During startup we store away the RAM setup. These are not in the
+ * bss, since their values are determined and written before the bss
+ * has been cleared.
+ */
+_rambase:
+.long 0
+_ramvec:
+.long 0
+_ramstart:
+.long 0
+_ramend:
+.long 0
+
+/*****************************************************************************/
+
+.text
+
+/*
+ * This is the codes first entry point. This is where it all
+ * begins...
+ */
+
+_start:
+ nop /* filler */
+ movew #0x2700, %sr /* no interrupts */
+
+ /*
+ * Do any platform or board specific setup now. Most boards
+ * don't need anything. Those exceptions are define this in
+ * their board specific includes.
+ */
+ PLATFORM_SETUP
+
+ /*
+ * Create basic memory configuration. Set VBR accordingly,
+ * and size memory.
+ */
+ movel #CONFIG_VECTORBASE,%a7
+ movec %a7,%VBR /* set vectors addr */
+ movel %a7,_ramvec
+
+ movel #CONFIG_RAMBASE,%a7 /* mark the base of RAM */
+ movel %a7,_rambase
+
+ GET_MEM_SIZE /* macro code determines size */
+ addl %a7,%d0
+ movel %d0,_ramend /* set end ram addr */
+
+ /*
+ * Now that we know what the memory is, lets enable cache
+ * and get things moving. This is Coldfire CPU specific.
+ */
+ CACHE_ENABLE /* enable CPU cache */
+
+
+#ifdef CONFIG_ROMFS_FS
+ /*
+ * Move ROM filesystem above bss :-)
+ */
+ lea _sbss,%a0 /* get start of bss */
+ lea _ebss,%a1 /* set up destination */
+ movel %a0,%a2 /* copy of bss start */
+
+ movel 8(%a0),%d0 /* get size of ROMFS */
+ addql #8,%d0 /* allow for rounding */
+ andl #0xfffffffc, %d0 /* whole words */
+
+ addl %d0,%a0 /* copy from end */
+ addl %d0,%a1 /* copy from end */
+ movel %a1,_ramstart /* set start of ram */
+
+_copy_romfs:
+ movel -(%a0),%d0 /* copy dword */
+ movel %d0,-(%a1)
+ cmpl %a0,%a2 /* check if at end */
+ bne _copy_romfs
+
+#else /* CONFIG_ROMFS_FS */
+ lea _ebss,%a1
+ movel %a1,_ramstart
+#endif /* CONFIG_ROMFS_FS */
+
+
+ /*
+ * Zero out the bss region.
+ */
+ lea _sbss,%a0 /* get start of bss */
+ lea _ebss,%a1 /* get end of bss */
+ clrl %d0 /* set value */
+_clear_bss:
+ movel %d0,(%a0)+ /* clear each word */
+ cmpl %a0,%a1 /* check if at end */
+ bne _clear_bss
+
+ /*
+ * Load the current task pointer and stack.
+ */
+ lea init_thread_union,%a0
+ lea THREAD_SIZE(%a0),%sp
+
+ /*
+ * Assember start up done, start code proper.
+ */
+ jsr start_kernel /* start Linux kernel */
+
+_exit:
+ jmp _exit /* should never get here */
+
+/*****************************************************************************/