aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot/dts/digsy_mtc.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/boot/dts/digsy_mtc.dts')
-rw-r--r--arch/powerpc/boot/dts/digsy_mtc.dts59
1 files changed, 51 insertions, 8 deletions
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
index 27bd267..a7511f2 100644
--- a/arch/powerpc/boot/dts/digsy_mtc.dts
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -23,19 +23,26 @@
soc5200@f0000000 {
timer@600 { // General Purpose Timer
+ #gpio-cells = <2>;
fsl,has-wdt;
+ gpio-controller;
};
- rtc@800 {
- status = "disabled";
+ timer@610 {
+ #gpio-cells = <2>;
+ gpio-controller;
};
- can@900 {
+ rtc@800 {
status = "disabled";
};
- can@980 {
- status = "disabled";
+ spi@f00 {
+ msp430@0 {
+ compatible = "spidev";
+ spi-max-frequency = <32000>;
+ reg = <0>;
+ };
};
psc@2000 { // PSC1
@@ -73,11 +80,16 @@
};
i2c@3d00 {
- rtc@50 {
+ eeprom@50 {
compatible = "at,24c08";
reg = <0x50>;
};
+ rtc@56 {
+ compatible = "mc,rv3029c2";
+ reg = <0x56>;
+ };
+
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
@@ -90,11 +102,22 @@
};
pci@f0000d00 {
- status = "disabled";
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
+ 0xc000 0 0 2 &mpc5200_pic 0 0 3
+ 0xc000 0 0 3 &mpc5200_pic 0 0 3
+ 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 10 0>;
+ bus-range = <0 0>;
+ ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+ 0x02000000 0 0x90000000 0x90000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
};
localbus {
- ranges = <0 0 0xff000000 0x1000000>;
+ ranges = <0 0 0xff000000 0x1000000
+ 4 0 0x60000000 0x0001000>;
// 16-bit flash device at LocalPlus Bus CS0
flash@0,0 {
@@ -122,5 +145,25 @@
reg = <0x00f00000 0x100000>;
};
};
+
+ can@4,0 {
+ compatible = "nxp,sja1000";
+ reg = <4 0x000 0x80>;
+ nxp,external-clock-frequency = <24000000>;
+ interrupts = <1 2 3>; // Level-low
+ };
+
+ can@4,100 {
+ compatible = "nxp,sja1000";
+ reg = <4 0x100 0x80>;
+ nxp,external-clock-frequency = <24000000>;
+ interrupts = <1 2 3>; // Level-low
+ };
+
+ serial@4,200 {
+ compatible = "nxp,sc28l92";
+ reg = <4 0x200 0x10>;
+ interrupts = <1 3 3>;
+ };
};
};