diff options
Diffstat (limited to 'arch/ppc/platforms')
-rw-r--r-- | arch/ppc/platforms/Makefile | 4 | ||||
-rw-r--r-- | arch/ppc/platforms/apus_pci.c | 207 | ||||
-rw-r--r-- | arch/ppc/platforms/apus_pci.h | 34 | ||||
-rw-r--r-- | arch/ppc/platforms/apus_setup.c | 798 |
4 files changed, 0 insertions, 1043 deletions
diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile index e17fad4..40f53fb 100644 --- a/arch/ppc/platforms/Makefile +++ b/arch/ppc/platforms/Makefile @@ -2,10 +2,6 @@ # Makefile for the linux kernel. # -obj-$(CONFIG_APUS) += apus_setup.o -ifeq ($(CONFIG_APUS),y) -obj-$(CONFIG_PCI) += apus_pci.o -endif obj-$(CONFIG_PPC_PREP) += prep_pci.o prep_setup.o obj-$(CONFIG_PREP_RESIDUAL) += residual.o obj-$(CONFIG_PQ2ADS) += pq2ads.o diff --git a/arch/ppc/platforms/apus_pci.c b/arch/ppc/platforms/apus_pci.c deleted file mode 100644 index dc165f0..0000000 --- a/arch/ppc/platforms/apus_pci.c +++ /dev/null @@ -1,207 +0,0 @@ -/* - * Copyright (C) Michel Dänzer <michdaen@iiic.ethz.ch> - * - * APUS PCI routines. - * - * Currently, only B/CVisionPPC cards (Permedia2) are supported. - * - * Thanks to Geert Uytterhoeven for the idea: - * Read values from given config space(s) for the first devices, -1 otherwise - * - */ - -#ifdef CONFIG_AMIGA - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/string.h> -#include <linux/init.h> - -#include <asm/io.h> -#include <asm/pci-bridge.h> -#include <asm/machdep.h> - -#include "apus_pci.h" - - -/* These definitions are mostly adapted from pm2fb.c */ - -#undef APUS_PCI_MASTER_DEBUG -#ifdef APUS_PCI_MASTER_DEBUG -#define DPRINTK(a,b...) printk(KERN_DEBUG "apus_pci: %s: " a, __FUNCTION__ , ## b) -#else -#define DPRINTK(a,b...) -#endif - -/* - * The _DEFINITIVE_ memory mapping/unmapping functions. - * This is due to the fact that they're changing soooo often... - */ -#define DEFW() wmb() -#define DEFR() rmb() -#define DEFRW() mb() - -#define DEVNO(d) ((d)>>3) -#define FNNO(d) ((d)&7) - - -extern unsigned long powerup_PCI_present; - -static struct pci_controller *apus_hose; - - -void *pci_io_base(unsigned int bus) -{ - return 0; -} - - -int -apus_pcibios_read_config(struct pci_bus *bus, int devfn, int offset, - int len, u32 *val) -{ - int fnno = FNNO(devfn); - int devno = DEVNO(devfn); - volatile unsigned char *cfg_data; - - if (bus->number > 0 || devno != 1) { - *val = ~0; - return PCIBIOS_DEVICE_NOT_FOUND; - } - /* base address + function offset + offset ^ endianness conversion */ - /* XXX the fnno<<5 bit seems wacky -- paulus */ - cfg_data = apus_hose->cfg_data + (fnno<<5) + (offset ^ (len - 1)); - switch (len) { - case 1: - *val = readb(cfg_data); - break; - case 2: - *val = readw(cfg_data); - break; - default: - *val = readl(cfg_data); - break; - } - - DPRINTK("read b: 0x%x, d: 0x%x, f: 0x%x, o: 0x%x, l: %d, v: 0x%x\n", - bus->number, devfn>>3, devfn&7, offset, len, *val); - return PCIBIOS_SUCCESSFUL; -} - -int -apus_pcibios_write_config(struct pci_bus *bus, int devfn, int offset, - int len, u32 *val) -{ - int fnno = FNNO(devfn); - int devno = DEVNO(devfn); - volatile unsigned char *cfg_data; - - if (bus->number > 0 || devno != 1) { - return PCIBIOS_DEVICE_NOT_FOUND; - } - /* base address + function offset + offset ^ endianness conversion */ - /* XXX the fnno<<5 bit seems wacky -- paulus */ - cfg_data = apus_hose->cfg_data + (fnno<<5) + (offset ^ (len - 1)); - switch (len) { - case 1: - writeb(val, cfg_data); DEFW(); - break; - case 2: - writew(val, cfg_data); DEFW(); - break; - default: - writel(val, cfg_data); DEFW(); - break; - } - - DPRINTK("write b: 0x%x, d: 0x%x, f: 0x%x, o: 0x%x, l: %d, v: 0x%x\n", - bus->number, devfn>>3, devfn&7, offset, len, val); - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops apus_pci_ops = { - apus_pcibios_read_config, - apus_pcibios_write_config -}; - -static struct resource pci_mem = { "B/CVisionPPC PCI mem", CVPPC_FB_APERTURE_ONE, CVPPC_PCI_CONFIG, IORESOURCE_MEM }; - -void __init -apus_pcibios_fixup(void) -{ -/* struct pci_dev *dev = pci_find_slot(0, 1<<3); - unsigned int reg, val, offset;*/ - - /* FIXME: interrupt? */ - /*dev->interrupt = xxx;*/ - - request_resource(&iomem_resource, &pci_mem); - printk("%s: PCI mem resource requested\n", __FUNCTION__); -} - -static void __init apus_pcibios_fixup_bus(struct pci_bus *bus) -{ - bus->resource[1] = &pci_mem; -} - - -/* - * This is from pm2fb.c again - * - * Check if PCI (B/CVisionPPC) is available, initialize it and set up - * the pcibios_* pointers - */ - - -void __init -apus_setup_pci_ptrs(void) -{ - if (!powerup_PCI_present) { - DPRINTK("no PCI bridge detected\n"); - return; - } - DPRINTK("Phase5 B/CVisionPPC PCI bridge detected.\n"); - - apus_hose = pcibios_alloc_controller(); - if (!apus_hose) { - printk("apus_pci: Can't allocate PCI controller structure\n"); - return; - } - - if (!(apus_hose->cfg_data = ioremap(CVPPC_PCI_CONFIG, 256))) { - printk("apus_pci: unable to map PCI config region\n"); - return; - } - - if (!(apus_hose->cfg_addr = ioremap(CSPPC_PCI_BRIDGE, 256))) { - printk("apus_pci: unable to map PCI bridge\n"); - return; - } - - writel(CSPPCF_BRIDGE_BIG_ENDIAN, apus_hose->cfg_addr + CSPPC_BRIDGE_ENDIAN); - DEFW(); - - writel(CVPPC_REGS_REGION, apus_hose->cfg_data+ PCI_BASE_ADDRESS_0); - DEFW(); - writel(CVPPC_FB_APERTURE_ONE, apus_hose->cfg_data + PCI_BASE_ADDRESS_1); - DEFW(); - writel(CVPPC_FB_APERTURE_TWO, apus_hose->cfg_data + PCI_BASE_ADDRESS_2); - DEFW(); - writel(CVPPC_ROM_ADDRESS, apus_hose->cfg_data + PCI_ROM_ADDRESS); - DEFW(); - - writel(0xef000000 | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER, apus_hose->cfg_data + PCI_COMMAND); - DEFW(); - - apus_hose->first_busno = 0; - apus_hose->last_busno = 0; - apus_hose->ops = &apus_pci_ops; - ppc_md.pcibios_fixup = apus_pcibios_fixup; - ppc_md.pcibios_fixup_bus = apus_pcibios_fixup_bus; - - return; -} - -#endif /* CONFIG_AMIGA */ diff --git a/arch/ppc/platforms/apus_pci.h b/arch/ppc/platforms/apus_pci.h deleted file mode 100644 index f15974a..0000000 --- a/arch/ppc/platforms/apus_pci.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Phase5 CybervisionPPC (TVP4020) definitions for the Permedia2 framebuffer - * driver. - * - * Copyright (c) 1998-1999 Ilario Nardinocchi (nardinoc@CS.UniBO.IT) - * -------------------------------------------------------------------------- - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file README.legal in the main directory of this archive - * for more details. - */ - -#ifndef APUS_PCI_H -#define APUS_PCI_H - - -#define CSPPC_PCI_BRIDGE 0xfffe0000 -#define CSPPC_BRIDGE_ENDIAN 0x0000 -#define CSPPC_BRIDGE_INT 0x0010 - -#define CVPPC_PCI_CONFIG 0xfffc0000 -#define CVPPC_ROM_ADDRESS 0xe2000001 -#define CVPPC_REGS_REGION 0xef000000 -#define CVPPC_FB_APERTURE_ONE 0xe0000000 -#define CVPPC_FB_APERTURE_TWO 0xe1000000 -#define CVPPC_FB_SIZE 0x00800000 - -/* CVPPC_BRIDGE_ENDIAN */ -#define CSPPCF_BRIDGE_BIG_ENDIAN 0x02 - -/* CVPPC_BRIDGE_INT */ -#define CSPPCF_BRIDGE_ACTIVE_INT2 0x01 - - -#endif /* APUS_PCI_H */ diff --git a/arch/ppc/platforms/apus_setup.c b/arch/ppc/platforms/apus_setup.c deleted file mode 100644 index 063274d..0000000 --- a/arch/ppc/platforms/apus_setup.c +++ /dev/null @@ -1,798 +0,0 @@ -/* - * Copyright (C) 1998, 1999 Jesper Skov - * - * Basically what is needed to replace functionality found in - * arch/m68k allowing Amiga drivers to work under APUS. - * Bits of code and/or ideas from arch/m68k and arch/ppc files. - * - * TODO: - * This file needs a *really* good cleanup. Restructure and optimize. - * Make sure it can be compiled for non-APUS configs. Begin to move - * Amiga specific stuff into mach/amiga. - */ - -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/initrd.h> -#include <linux/seq_file.h> - -/* Needs INITSERIAL call in head.S! */ -#undef APUS_DEBUG - -#include <asm/bootinfo.h> -#include <asm/setup.h> -#include <asm/amigahw.h> -#include <asm/amigaints.h> -#include <asm/amigappc.h> -#include <asm/pgtable.h> -#include <asm/dma.h> -#include <asm/machdep.h> -#include <asm/time.h> - -unsigned long m68k_machtype; -char debug_device[6] = ""; - -extern void amiga_init_IRQ(void); - -extern void apus_setup_pci_ptrs(void); - -void (*mach_sched_init) (void (*handler)(int, void *, struct pt_regs *)) __initdata = NULL; -/* machine dependent irq functions */ -void (*mach_init_IRQ) (void) __initdata = NULL; -void (*(*mach_default_handler)[]) (int, void *, struct pt_regs *) = NULL; -void (*mach_get_model) (char *model) = NULL; -int (*mach_get_hardware_list) (char *buffer) = NULL; -int (*mach_get_irq_list) (struct seq_file *, void *) = NULL; -void (*mach_process_int) (int, struct pt_regs *) = NULL; -/* machine dependent timer functions */ -unsigned long (*mach_gettimeoffset) (void); -void (*mach_gettod) (int*, int*, int*, int*, int*, int*); -int (*mach_hwclk) (int, struct hwclk_time*) = NULL; -int (*mach_set_clock_mmss) (unsigned long) = NULL; -void (*mach_reset)( void ); -long mach_max_dma_address = 0x00ffffff; /* default set to the lower 16MB */ -#ifdef CONFIG_HEARTBEAT -void (*mach_heartbeat) (int) = NULL; -extern void apus_heartbeat (void); -#endif - -extern unsigned long amiga_model; -extern unsigned decrementer_count;/* count value for 1e6/HZ microseconds */ -extern unsigned count_period_num; /* 1 decrementer count equals */ -extern unsigned count_period_den; /* count_period_num / count_period_den us */ - -int num_memory = 0; -struct mem_info memory[NUM_MEMINFO];/* memory description */ -/* FIXME: Duplicate memory data to avoid conflicts with m68k shared code. */ -int m68k_realnum_memory = 0; -struct mem_info m68k_memory[NUM_MEMINFO];/* memory description */ - -struct mem_info ramdisk; - -extern void config_amiga(void); - -static int __60nsram = 0; - -/* for cpuinfo */ -static int __bus_speed = 0; -static int __speed_test_failed = 0; - -/********************************************** COMPILE PROTECTION */ -/* Provide some stubs that links to Amiga specific functions. - * This allows CONFIG_APUS to be removed from generic PPC files while - * preventing link errors for other PPC targets. - */ -unsigned long apus_get_rtc_time(void) -{ -#ifdef CONFIG_APUS - extern unsigned long m68k_get_rtc_time(void); - - return m68k_get_rtc_time (); -#else - return 0; -#endif -} - -int apus_set_rtc_time(unsigned long nowtime) -{ -#ifdef CONFIG_APUS - extern int m68k_set_rtc_time(unsigned long nowtime); - - return m68k_set_rtc_time (nowtime); -#else - return 0; -#endif -} - -/*********************************************************** SETUP */ -/* From arch/m68k/kernel/setup.c. */ -void __init apus_setup_arch(void) -{ -#ifdef CONFIG_APUS - extern char cmd_line[]; - int i; - char *p, *q; - - /* Let m68k-shared code know it should do the Amiga thing. */ - m68k_machtype = MACH_AMIGA; - - /* Parse the command line for arch-specific options. - * For the m68k, this is currently only "debug=xxx" to enable printing - * certain kernel messages to some machine-specific device. */ - for( p = cmd_line; p && *p; ) { - i = 0; - if (!strncmp( p, "debug=", 6 )) { - strlcpy( debug_device, p+6, sizeof(debug_device) ); - if ((q = strchr( debug_device, ' ' ))) *q = 0; - i = 1; - } else if (!strncmp( p, "60nsram", 7 )) { - APUS_WRITE (APUS_REG_WAITSTATE, - REGWAITSTATE_SETRESET - |REGWAITSTATE_PPCR - |REGWAITSTATE_PPCW); - __60nsram = 1; - i = 1; - } - - if (i) { - /* option processed, delete it */ - if ((q = strchr( p, ' ' ))) - strcpy( p, q+1 ); - else - *p = 0; - } else { - if ((p = strchr( p, ' ' ))) ++p; - } - } - - config_amiga(); - -#if 0 /* Enable for logging - also include logging.o in Makefile rule */ - { -#define LOG_SIZE 4096 - void* base; - - /* Throw away some memory - the P5 firmare stomps on top - * of CHIP memory during bootup. - */ - amiga_chip_alloc(0x1000); - - base = amiga_chip_alloc(LOG_SIZE+sizeof(klog_data_t)); - LOG_INIT(base, base+sizeof(klog_data_t), LOG_SIZE); - } -#endif -#endif -} - -int -apus_show_cpuinfo(struct seq_file *m) -{ - extern int __map_without_bats; - extern unsigned long powerup_PCI_present; - - seq_printf(m, "machine\t\t: Amiga\n"); - seq_printf(m, "bus speed\t: %d%s", __bus_speed, - (__speed_test_failed) ? " [failed]\n" : "\n"); - seq_printf(m, "using BATs\t: %s\n", - (__map_without_bats) ? "No" : "Yes"); - seq_printf(m, "ram speed\t: %dns\n", (__60nsram) ? 60 : 70); - seq_printf(m, "PCI bridge\t: %s\n", - (powerup_PCI_present) ? "Yes" : "No"); - return 0; -} - -static void get_current_tb(unsigned long long *time) -{ - __asm __volatile ("1:mftbu 4 \n\t" - " mftb 5 \n\t" - " mftbu 6 \n\t" - " cmpw 4,6 \n\t" - " bne 1b \n\t" - " stw 4,0(%0)\n\t" - " stw 5,4(%0)\n\t" - : - : "r" (time) - : "r4", "r5", "r6"); -} - - -void apus_calibrate_decr(void) -{ -#ifdef CONFIG_APUS - unsigned long freq; - - /* This algorithm for determining the bus speed was - contributed by Ralph Schmidt. */ - unsigned long long start, stop; - int bus_speed; - int speed_test_failed = 0; - - { - unsigned long loop = amiga_eclock / 10; - - get_current_tb (&start); - while (loop--) { - unsigned char tmp; - - tmp = ciaa.pra; - } - get_current_tb (&stop); - } - - bus_speed = (((unsigned long)(stop-start))*10*4) / 1000000; - if (AMI_1200 == amiga_model) - bus_speed /= 2; - - if ((bus_speed >= 47) && (bus_speed < 53)) { - bus_speed = 50; - freq = 12500000; - } else if ((bus_speed >= 57) && (bus_speed < 63)) { - bus_speed = 60; - freq = 15000000; - } else if ((bus_speed >= 63) && (bus_speed < 69)) { - bus_speed = 67; - freq = 16666667; - } else { - printk ("APUS: Unable to determine bus speed (%d). " - "Defaulting to 50MHz", bus_speed); - bus_speed = 50; - freq = 12500000; - speed_test_failed = 1; - } - - /* Ease diagnostics... */ - { - extern int __map_without_bats; - extern unsigned long powerup_PCI_present; - - printk ("APUS: BATs=%d, BUS=%dMHz", - (__map_without_bats) ? 0 : 1, - bus_speed); - if (speed_test_failed) - printk ("[FAILED - please report]"); - - printk (", RAM=%dns, PCI bridge=%d\n", - (__60nsram) ? 60 : 70, - (powerup_PCI_present) ? 1 : 0); - - /* print a bit more if asked politely... */ - if (!(ciaa.pra & 0x40)){ - extern unsigned int bat_addrs[4][3]; - int b; - for (b = 0; b < 4; ++b) { - printk ("APUS: BAT%d ", b); - printk ("%08x-%08x -> %08x\n", - bat_addrs[b][0], - bat_addrs[b][1], - bat_addrs[b][2]); - } - } - - } - - printk("time_init: decrementer frequency = %lu.%.6lu MHz\n", - freq/1000000, freq%1000000); - tb_ticks_per_jiffy = freq / HZ; - tb_to_us = mulhwu_scale_factor(freq, 1000000); - - __bus_speed = bus_speed; - __speed_test_failed = speed_test_failed; -#endif -} - -void arch_gettod(int *year, int *mon, int *day, int *hour, - int *min, int *sec) -{ -#ifdef CONFIG_APUS - if (mach_gettod) - mach_gettod(year, mon, day, hour, min, sec); - else - *year = *mon = *day = *hour = *min = *sec = 0; -#endif -} - -/* for "kbd-reset" cmdline param */ -__init -void kbd_reset_setup(char *str, int *ints) -{ -} - -/*********************************************************** MEMORY */ -#define KMAP_MAX 32 -unsigned long kmap_chunks[KMAP_MAX*3]; -int kmap_chunk_count = 0; - -/* From pgtable.h */ -static __inline__ pte_t *my_find_pte(struct mm_struct *mm,unsigned long va) -{ - pgd_t *dir = 0; - pmd_t *pmd = 0; - pte_t *pte = 0; - - va &= PAGE_MASK; - - dir = pgd_offset( mm, va ); - if (dir) - { - pmd = pmd_offset(dir, va & PAGE_MASK); - if (pmd && pmd_present(*pmd)) - { - pte = pte_offset(pmd, va); - } - } - return pte; -} - - -/* Again simulating an m68k/mm/kmap.c function. */ -void kernel_set_cachemode( unsigned long address, unsigned long size, - unsigned int cmode ) -{ - unsigned long mask, flags; - - switch (cmode) - { - case IOMAP_FULL_CACHING: - mask = ~(_PAGE_NO_CACHE | _PAGE_GUARDED); - flags = 0; - break; - case IOMAP_NOCACHE_SER: - mask = ~0; - flags = (_PAGE_NO_CACHE | _PAGE_GUARDED); - break; - default: - panic ("kernel_set_cachemode() doesn't support mode %d\n", - cmode); - break; - } - - size /= PAGE_SIZE; - address &= PAGE_MASK; - while (size--) - { - pte_t *pte; - - pte = my_find_pte(&init_mm, address); - if ( !pte ) - { - printk("pte NULL in kernel_set_cachemode()\n"); - return; - } - - pte_val (*pte) &= mask; - pte_val (*pte) |= flags; - flush_tlb_page(find_vma(&init_mm,address),address); - - address += PAGE_SIZE; - } -} - -unsigned long mm_ptov (unsigned long paddr) -{ - unsigned long ret; - if (paddr < 16*1024*1024) - ret = ZTWO_VADDR(paddr); - else { - int i; - - for (i = 0; i < kmap_chunk_count;){ - unsigned long phys = kmap_chunks[i++]; - unsigned long size = kmap_chunks[i++]; - unsigned long virt = kmap_chunks[i++]; - if (paddr >= phys - && paddr < (phys + size)){ - ret = virt + paddr - phys; - goto exit; - } - } - - ret = (unsigned long) __va(paddr); - } -exit: -#ifdef DEBUGPV - printk ("PTOV(%lx)=%lx\n", paddr, ret); -#endif - return ret; -} - -int mm_end_of_chunk (unsigned long addr, int len) -{ - if (memory[0].addr + memory[0].size == addr + len) - return 1; - return 0; -} - -/*********************************************************** CACHE */ - -#define L1_CACHE_BYTES 32 -#define MAX_CACHE_SIZE 8192 -void cache_push(__u32 addr, int length) -{ - addr = mm_ptov(addr); - - if (MAX_CACHE_SIZE < length) - length = MAX_CACHE_SIZE; - - while(length > 0){ - __asm ("dcbf 0,%0\n\t" - : : "r" (addr)); - addr += L1_CACHE_BYTES; - length -= L1_CACHE_BYTES; - } - /* Also flush trailing block */ - __asm ("dcbf 0,%0\n\t" - "sync \n\t" - : : "r" (addr)); -} - -void cache_clear(__u32 addr, int length) -{ - if (MAX_CACHE_SIZE < length) - length = MAX_CACHE_SIZE; - - addr = mm_ptov(addr); - - __asm ("dcbf 0,%0\n\t" - "sync \n\t" - "icbi 0,%0 \n\t" - "isync \n\t" - : : "r" (addr)); - - addr += L1_CACHE_BYTES; - length -= L1_CACHE_BYTES; - - while(length > 0){ - __asm ("dcbf 0,%0\n\t" - "sync \n\t" - "icbi 0,%0 \n\t" - "isync \n\t" - : : "r" (addr)); - addr += L1_CACHE_BYTES; - length -= L1_CACHE_BYTES; - } - - __asm ("dcbf 0,%0\n\t" - "sync \n\t" - "icbi 0,%0 \n\t" - "isync \n\t" - : : "r" (addr)); -} - -/****************************************************** from setup.c */ -void -apus_restart(char *cmd) -{ - local_irq_disable(); - - APUS_WRITE(APUS_REG_LOCK, - REGLOCK_BLACKMAGICK1|REGLOCK_BLACKMAGICK2); - APUS_WRITE(APUS_REG_LOCK, - REGLOCK_BLACKMAGICK1|REGLOCK_BLACKMAGICK3); - APUS_WRITE(APUS_REG_LOCK, - REGLOCK_BLACKMAGICK2|REGLOCK_BLACKMAGICK3); - APUS_WRITE(APUS_REG_SHADOW, REGSHADOW_SELFRESET); - APUS_WRITE(APUS_REG_RESET, REGRESET_AMIGARESET); - for(;;); -} - -void -apus_power_off(void) -{ - for (;;); -} - -void -apus_halt(void) -{ - apus_restart(NULL); -} - -/****************************************************** IRQ stuff */ - -static unsigned char last_ipl[8]; - -int apus_get_irq(void) -{ - unsigned char ipl_emu, mask; - unsigned int level; - - APUS_READ(APUS_IPL_EMU, ipl_emu); - level = (ipl_emu >> 3) & IPLEMU_IPLMASK; - mask = IPLEMU_SETRESET|IPLEMU_DISABLEINT|level; - level ^= 7; - - /* Save previous IPL value */ - if (last_ipl[level]) - return -2; - last_ipl[level] = ipl_emu; - - /* Set to current IPL value */ - APUS_WRITE(APUS_IPL_EMU, mask); - APUS_WRITE(APUS_IPL_EMU, IPLEMU_DISABLEINT|level); - - -#ifdef __INTERRUPT_DEBUG - printk("<%d:%d>", level, ~ipl_emu & IPLEMU_IPLMASK); -#endif - return level + IRQ_AMIGA_AUTO; -} - -void apus_end_irq(unsigned int irq) -{ - unsigned char ipl_emu; - unsigned int level = irq - IRQ_AMIGA_AUTO; -#ifdef __INTERRUPT_DEBUG - printk("{%d}", ~last_ipl[level] & IPLEMU_IPLMASK); -#endif - /* Restore IPL to the previous value */ - ipl_emu = last_ipl[level] & IPLEMU_IPLMASK; - APUS_WRITE(APUS_IPL_EMU, IPLEMU_SETRESET|IPLEMU_DISABLEINT|ipl_emu); - last_ipl[level] = 0; - ipl_emu ^= 7; - APUS_WRITE(APUS_IPL_EMU, IPLEMU_DISABLEINT|ipl_emu); -} - -/****************************************************** debugging */ - -/* some serial hardware definitions */ -#define SDR_OVRUN (1<<15) -#define SDR_RBF (1<<14) -#define SDR_TBE (1<<13) -#define SDR_TSRE (1<<12) - -#define AC_SETCLR (1<<15) -#define AC_UARTBRK (1<<11) - -#define SER_DTR (1<<7) -#define SER_RTS (1<<6) -#define SER_DCD (1<<5) -#define SER_CTS (1<<4) -#define SER_DSR (1<<3) - -static __inline__ void ser_RTSon(void) -{ - ciab.pra &= ~SER_RTS; /* active low */ -} - -int __debug_ser_out( unsigned char c ) -{ - amiga_custom.serdat = c | 0x100; - mb(); - while (!(amiga_custom.serdatr & 0x2000)) - barrier(); - return 1; -} - -unsigned char __debug_ser_in( void ) -{ - unsigned char c; - - /* XXX: is that ok?? derived from amiga_ser.c... */ - while( !(amiga_custom.intreqr & IF_RBF) ) - barrier(); - c = amiga_custom.serdatr; - /* clear the interrupt, so that another character can be read */ - amiga_custom.intreq = IF_RBF; - return c; -} - -int __debug_serinit( void ) -{ - unsigned long flags; - - local_irq_save(flags); - - /* turn off Rx and Tx interrupts */ - amiga_custom.intena = IF_RBF | IF_TBE; - - /* clear any pending interrupt */ - amiga_custom.intreq = IF_RBF | IF_TBE; - - local_irq_restore(flags); - - /* - * set the appropriate directions for the modem control flags, - * and clear RTS and DTR - */ - ciab.ddra |= (SER_DTR | SER_RTS); /* outputs */ - ciab.ddra &= ~(SER_DCD | SER_CTS | SER_DSR); /* inputs */ - -#ifdef CONFIG_KGDB - /* turn Rx interrupts on for GDB */ - amiga_custom.intena = IF_SETCLR | IF_RBF; - ser_RTSon(); -#endif - - return 0; -} - -void __debug_print_hex(unsigned long x) -{ - int i; - char hexchars[] = "0123456789ABCDEF"; - - for (i = 0; i < 8; i++) { - __debug_ser_out(hexchars[(x >> 28) & 15]); - x <<= 4; - } - __debug_ser_out('\n'); - __debug_ser_out('\r'); -} - -void __debug_print_string(char* s) -{ - unsigned char c; - while((c = *s++)) - __debug_ser_out(c); - __debug_ser_out('\n'); - __debug_ser_out('\r'); -} - -static void apus_progress(char *s, unsigned short value) -{ - __debug_print_string(s); -} - -/****************************************************** init */ - -/* The number of spurious interrupts */ -volatile unsigned int num_spurious; - -extern struct irqaction amiga_sys_irqaction[AUTO_IRQS]; - - -extern void amiga_enable_irq(unsigned int irq); -extern void amiga_disable_irq(unsigned int irq); - -struct hw_interrupt_type amiga_sys_irqctrl = { - .typename = "Amiga IPL", - .end = apus_end_irq, -}; - -struct hw_interrupt_type amiga_irqctrl = { - .typename = "Amiga ", - .enable = amiga_enable_irq, - .disable = amiga_disable_irq, -}; - -#define HARDWARE_MAPPED_SIZE (512*1024) -unsigned long __init apus_find_end_of_memory(void) -{ - int shadow = 0; - unsigned long total; - - /* The memory size reported by ADOS excludes the 512KB - reserved for PPC exception registers and possibly 512KB - containing a shadow of the ADOS ROM. */ - { - unsigned long size = memory[0].size; - - /* If 2MB aligned, size was probably user - specified. We can't tell anything about shadowing - in this case so skip shadow assignment. */ - if (0 != (size & 0x1fffff)){ - /* Align to 512KB to ensure correct handling - of both memfile and system specified - sizes. */ - size = ((size+0x0007ffff) & 0xfff80000); - /* If memory is 1MB aligned, assume - shadowing. */ - shadow = !(size & 0x80000); - } - - /* Add the chunk that ADOS does not see. by aligning - the size to the nearest 2MB limit upwards. */ - memory[0].size = ((size+0x001fffff) & 0xffe00000); - } - - ppc_memstart = memory[0].addr; - ppc_memoffset = PAGE_OFFSET - PPC_MEMSTART; - total = memory[0].size; - - /* Remove the memory chunks that are controlled by special - Phase5 hardware. */ - - /* Remove the upper 512KB if it contains a shadow of - the ADOS ROM. FIXME: It might be possible to - disable this shadow HW. Check the booter - (ppc_boot.c) */ - if (shadow) - total -= HARDWARE_MAPPED_SIZE; - - /* Remove the upper 512KB where the PPC exception - vectors are mapped. */ - total -= HARDWARE_MAPPED_SIZE; - - /* Linux/APUS only handles one block of memory -- the one on - the PowerUP board. Other system memory is horrible slow in - comparison. The user can use other memory for swapping - using the z2ram device. */ - return total; -} - -static void __init -apus_map_io(void) -{ - /* Map PPC exception vectors. */ - io_block_mapping(0xfff00000, 0xfff00000, 0x00020000, _PAGE_KERNEL); - /* Map chip and ZorroII memory */ - io_block_mapping(zTwoBase, 0x00000000, 0x01000000, _PAGE_IO); -} - -__init -void apus_init_IRQ(void) -{ - struct irqaction *action; - int i; - -#ifdef CONFIG_PCI - apus_setup_pci_ptrs(); -#endif - - for ( i = 0 ; i < AMI_IRQS; i++ ) { - irq_desc[i].status = IRQ_LEVEL; - if (i < IRQ_AMIGA_AUTO) { - irq_desc[i].chip = &amiga_irqctrl; - } else { - irq_desc[i].chip = &amiga_sys_irqctrl; - action = &amiga_sys_irqaction[i-IRQ_AMIGA_AUTO]; - if (action->name) - setup_irq(i, action); - } - } - - amiga_init_IRQ(); - -} - -__init -void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - extern int parse_bootinfo(const struct bi_record *); - extern char _end[]; - - /* Parse bootinfo. The bootinfo is located right after - the kernel bss */ - parse_bootinfo((const struct bi_record *)&_end); -#ifdef CONFIG_BLK_DEV_INITRD - /* Take care of initrd if we have one. Use data from - bootinfo to avoid the need to initialize PPC - registers when kernel is booted via a PPC reset. */ - if ( ramdisk.addr ) { - initrd_start = (unsigned long) __va(ramdisk.addr); - initrd_end = (unsigned long) - __va(ramdisk.size + ramdisk.addr); - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - ISA_DMA_THRESHOLD = 0x00ffffff; - - ppc_md.setup_arch = apus_setup_arch; - ppc_md.show_cpuinfo = apus_show_cpuinfo; - ppc_md.init_IRQ = apus_init_IRQ; - ppc_md.get_irq = apus_get_irq; - -#ifdef CONFIG_HEARTBEAT - ppc_md.heartbeat = apus_heartbeat; - ppc_md.heartbeat_count = 1; -#endif -#ifdef APUS_DEBUG - __debug_serinit(); - ppc_md.progress = apus_progress; -#endif - ppc_md.init = NULL; - - ppc_md.restart = apus_restart; - ppc_md.power_off = apus_power_off; - ppc_md.halt = apus_halt; - - ppc_md.time_init = NULL; - ppc_md.set_rtc_time = apus_set_rtc_time; - ppc_md.get_rtc_time = apus_get_rtc_time; - ppc_md.calibrate_decr = apus_calibrate_decr; - - ppc_md.find_end_of_memory = apus_find_end_of_memory; - ppc_md.setup_io_mappings = apus_map_io; -} |