diff options
Diffstat (limited to 'arch/x86/kernel/mpparse_64.c')
-rw-r--r-- | arch/x86/kernel/mpparse_64.c | 852 |
1 files changed, 852 insertions, 0 deletions
diff --git a/arch/x86/kernel/mpparse_64.c b/arch/x86/kernel/mpparse_64.c new file mode 100644 index 0000000..8bf0ca0 --- /dev/null +++ b/arch/x86/kernel/mpparse_64.c @@ -0,0 +1,852 @@ +/* + * Intel Multiprocessor Specification 1.1 and 1.4 + * compliant MP-table parsing routines. + * + * (c) 1995 Alan Cox, Building #3 <alan@redhat.com> + * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com> + * + * Fixes + * Erich Boleyn : MP v1.4 and additional changes. + * Alan Cox : Added EBDA scanning + * Ingo Molnar : various cleanups and rewrites + * Maciej W. Rozycki: Bits for default MP configurations + * Paul Diefenbaugh: Added full ACPI support + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/bootmem.h> +#include <linux/kernel_stat.h> +#include <linux/mc146818rtc.h> +#include <linux/acpi.h> +#include <linux/module.h> + +#include <asm/smp.h> +#include <asm/mtrr.h> +#include <asm/mpspec.h> +#include <asm/pgalloc.h> +#include <asm/io_apic.h> +#include <asm/proto.h> +#include <asm/acpi.h> + +/* Have we found an MP table */ +int smp_found_config; + +/* + * Various Linux-internal data structures created from the + * MP-table. + */ +DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); +int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 }; + +static int mp_current_pci_id = 0; +/* I/O APIC entries */ +struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS]; + +/* # of MP IRQ source entries */ +struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; + +/* MP IRQ source entries */ +int mp_irq_entries; + +int nr_ioapics; +unsigned long mp_lapic_addr = 0; + + + +/* Processor that is doing the boot up */ +unsigned int boot_cpu_id = -1U; +/* Internal processor count */ +unsigned int num_processors __cpuinitdata = 0; + +unsigned disabled_cpus __cpuinitdata; + +/* Bitmask of physically existing CPUs */ +physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE; + +u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; + + +/* + * Intel MP BIOS table parsing routines: + */ + +/* + * Checksum an MP configuration block. + */ + +static int __init mpf_checksum(unsigned char *mp, int len) +{ + int sum = 0; + + while (len--) + sum += *mp++; + + return sum & 0xFF; +} + +static void __cpuinit MP_processor_info (struct mpc_config_processor *m) +{ + int cpu; + cpumask_t tmp_map; + char *bootup_cpu = ""; + + if (!(m->mpc_cpuflag & CPU_ENABLED)) { + disabled_cpus++; + return; + } + if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { + bootup_cpu = " (Bootup-CPU)"; + boot_cpu_id = m->mpc_apicid; + } + + printk(KERN_INFO "Processor #%d%s\n", m->mpc_apicid, bootup_cpu); + + if (num_processors >= NR_CPUS) { + printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." + " Processor ignored.\n", NR_CPUS); + return; + } + + num_processors++; + cpus_complement(tmp_map, cpu_present_map); + cpu = first_cpu(tmp_map); + + physid_set(m->mpc_apicid, phys_cpu_present_map); + if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { + /* + * bios_cpu_apicid is required to have processors listed + * in same order as logical cpu numbers. Hence the first + * entry is BSP, and so on. + */ + cpu = 0; + } + bios_cpu_apicid[cpu] = m->mpc_apicid; + x86_cpu_to_apicid[cpu] = m->mpc_apicid; + + cpu_set(cpu, cpu_possible_map); + cpu_set(cpu, cpu_present_map); +} + +static void __init MP_bus_info (struct mpc_config_bus *m) +{ + char str[7]; + + memcpy(str, m->mpc_bustype, 6); + str[6] = 0; + Dprintk("Bus #%d is %s\n", m->mpc_busid, str); + + if (strncmp(str, "ISA", 3) == 0) { + set_bit(m->mpc_busid, mp_bus_not_pci); + } else if (strncmp(str, "PCI", 3) == 0) { + clear_bit(m->mpc_busid, mp_bus_not_pci); + mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id; + mp_current_pci_id++; + } else { + printk(KERN_ERR "Unknown bustype %s\n", str); + } +} + +static int bad_ioapic(unsigned long address) +{ + if (nr_ioapics >= MAX_IO_APICS) { + printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " + "(found %d)\n", MAX_IO_APICS, nr_ioapics); + panic("Recompile kernel with bigger MAX_IO_APICS!\n"); + } + if (!address) { + printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address" + " found in table, skipping!\n"); + return 1; + } + return 0; +} + +static void __init MP_ioapic_info (struct mpc_config_ioapic *m) +{ + if (!(m->mpc_flags & MPC_APIC_USABLE)) + return; + + printk("I/O APIC #%d at 0x%X.\n", + m->mpc_apicid, m->mpc_apicaddr); + + if (bad_ioapic(m->mpc_apicaddr)) + return; + + mp_ioapics[nr_ioapics] = *m; + nr_ioapics++; +} + +static void __init MP_intsrc_info (struct mpc_config_intsrc *m) +{ + mp_irqs [mp_irq_entries] = *m; + Dprintk("Int: type %d, pol %d, trig %d, bus %d," + " IRQ %02x, APIC ID %x, APIC INT %02x\n", + m->mpc_irqtype, m->mpc_irqflag & 3, + (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus, + m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq); + if (++mp_irq_entries >= MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!!\n"); +} + +static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m) +{ + Dprintk("Lint: type %d, pol %d, trig %d, bus %d," + " IRQ %02x, APIC ID %x, APIC LINT %02x\n", + m->mpc_irqtype, m->mpc_irqflag & 3, + (m->mpc_irqflag >> 2) &3, m->mpc_srcbusid, + m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint); +} + +/* + * Read/parse the MPC + */ + +static int __init smp_read_mpc(struct mp_config_table *mpc) +{ + char str[16]; + int count=sizeof(*mpc); + unsigned char *mpt=((unsigned char *)mpc)+count; + + if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) { + printk("MPTABLE: bad signature [%c%c%c%c]!\n", + mpc->mpc_signature[0], + mpc->mpc_signature[1], + mpc->mpc_signature[2], + mpc->mpc_signature[3]); + return 0; + } + if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) { + printk("MPTABLE: checksum error!\n"); + return 0; + } + if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) { + printk(KERN_ERR "MPTABLE: bad table version (%d)!!\n", + mpc->mpc_spec); + return 0; + } + if (!mpc->mpc_lapic) { + printk(KERN_ERR "MPTABLE: null local APIC address!\n"); + return 0; + } + memcpy(str,mpc->mpc_oem,8); + str[8] = 0; + printk(KERN_INFO "MPTABLE: OEM ID: %s ",str); + + memcpy(str,mpc->mpc_productid,12); + str[12] = 0; + printk("MPTABLE: Product ID: %s ",str); + + printk("MPTABLE: APIC at: 0x%X\n",mpc->mpc_lapic); + + /* save the local APIC address, it might be non-default */ + if (!acpi_lapic) + mp_lapic_addr = mpc->mpc_lapic; + + /* + * Now process the configuration blocks. + */ + while (count < mpc->mpc_length) { + switch(*mpt) { + case MP_PROCESSOR: + { + struct mpc_config_processor *m= + (struct mpc_config_processor *)mpt; + if (!acpi_lapic) + MP_processor_info(m); + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + case MP_BUS: + { + struct mpc_config_bus *m= + (struct mpc_config_bus *)mpt; + MP_bus_info(m); + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + case MP_IOAPIC: + { + struct mpc_config_ioapic *m= + (struct mpc_config_ioapic *)mpt; + MP_ioapic_info(m); + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + case MP_INTSRC: + { + struct mpc_config_intsrc *m= + (struct mpc_config_intsrc *)mpt; + + MP_intsrc_info(m); + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + case MP_LINTSRC: + { + struct mpc_config_lintsrc *m= + (struct mpc_config_lintsrc *)mpt; + MP_lintsrc_info(m); + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + } + } + setup_apic_routing(); + if (!num_processors) + printk(KERN_ERR "MPTABLE: no processors registered!\n"); + return num_processors; +} + +static int __init ELCR_trigger(unsigned int irq) +{ + unsigned int port; + + port = 0x4d0 + (irq >> 3); + return (inb(port) >> (irq & 7)) & 1; +} + +static void __init construct_default_ioirq_mptable(int mpc_default_type) +{ + struct mpc_config_intsrc intsrc; + int i; + int ELCR_fallback = 0; + + intsrc.mpc_type = MP_INTSRC; + intsrc.mpc_irqflag = 0; /* conforming */ + intsrc.mpc_srcbus = 0; + intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid; + + intsrc.mpc_irqtype = mp_INT; + + /* + * If true, we have an ISA/PCI system with no IRQ entries + * in the MP table. To prevent the PCI interrupts from being set up + * incorrectly, we try to use the ELCR. The sanity check to see if + * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can + * never be level sensitive, so we simply see if the ELCR agrees. + * If it does, we assume it's valid. + */ + if (mpc_default_type == 5) { + printk(KERN_INFO "ISA/PCI bus type with no IRQ information... falling back to ELCR\n"); + + if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || ELCR_trigger(13)) + printk(KERN_ERR "ELCR contains invalid data... not using ELCR\n"); + else { + printk(KERN_INFO "Using ELCR to identify PCI interrupts\n"); + ELCR_fallback = 1; + } + } + + for (i = 0; i < 16; i++) { + switch (mpc_default_type) { + case 2: + if (i == 0 || i == 13) + continue; /* IRQ0 & IRQ13 not connected */ + /* fall through */ + default: + if (i == 2) + continue; /* IRQ2 is never connected */ + } + + if (ELCR_fallback) { + /* + * If the ELCR indicates a level-sensitive interrupt, we + * copy that information over to the MP table in the + * irqflag field (level sensitive, active high polarity). + */ + if (ELCR_trigger(i)) + intsrc.mpc_irqflag = 13; + else + intsrc.mpc_irqflag = 0; + } + + intsrc.mpc_srcbusirq = i; + intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */ + MP_intsrc_info(&intsrc); + } + + intsrc.mpc_irqtype = mp_ExtINT; + intsrc.mpc_srcbusirq = 0; + intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */ + MP_intsrc_info(&intsrc); +} + +static inline void __init construct_default_ISA_mptable(int mpc_default_type) +{ + struct mpc_config_processor processor; + struct mpc_config_bus bus; + struct mpc_config_ioapic ioapic; + struct mpc_config_lintsrc lintsrc; + int linttypes[2] = { mp_ExtINT, mp_NMI }; + int i; + + /* + * local APIC has default address + */ + mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; + + /* + * 2 CPUs, numbered 0 & 1. + */ + processor.mpc_type = MP_PROCESSOR; + processor.mpc_apicver = 0; + processor.mpc_cpuflag = CPU_ENABLED; + processor.mpc_cpufeature = 0; + processor.mpc_featureflag = 0; + processor.mpc_reserved[0] = 0; + processor.mpc_reserved[1] = 0; + for (i = 0; i < 2; i++) { + processor.mpc_apicid = i; + MP_processor_info(&processor); + } + + bus.mpc_type = MP_BUS; + bus.mpc_busid = 0; + switch (mpc_default_type) { + default: + printk(KERN_ERR "???\nUnknown standard configuration %d\n", + mpc_default_type); + /* fall through */ + case 1: + case 5: + memcpy(bus.mpc_bustype, "ISA ", 6); + break; + } + MP_bus_info(&bus); + if (mpc_default_type > 4) { + bus.mpc_busid = 1; + memcpy(bus.mpc_bustype, "PCI ", 6); + MP_bus_info(&bus); + } + + ioapic.mpc_type = MP_IOAPIC; + ioapic.mpc_apicid = 2; + ioapic.mpc_apicver = 0; + ioapic.mpc_flags = MPC_APIC_USABLE; + ioapic.mpc_apicaddr = 0xFEC00000; + MP_ioapic_info(&ioapic); + + /* + * We set up most of the low 16 IO-APIC pins according to MPS rules. + */ + construct_default_ioirq_mptable(mpc_default_type); + + lintsrc.mpc_type = MP_LINTSRC; + lintsrc.mpc_irqflag = 0; /* conforming */ + lintsrc.mpc_srcbusid = 0; + lintsrc.mpc_srcbusirq = 0; + lintsrc.mpc_destapic = MP_APIC_ALL; + for (i = 0; i < 2; i++) { + lintsrc.mpc_irqtype = linttypes[i]; + lintsrc.mpc_destapiclint = i; + MP_lintsrc_info(&lintsrc); + } +} + +static struct intel_mp_floating *mpf_found; + +/* + * Scan the memory blocks for an SMP configuration block. + */ +void __init get_smp_config (void) +{ + struct intel_mp_floating *mpf = mpf_found; + + /* + * ACPI supports both logical (e.g. Hyper-Threading) and physical + * processors, where MPS only supports physical. + */ + if (acpi_lapic && acpi_ioapic) { + printk(KERN_INFO "Using ACPI (MADT) for SMP configuration information\n"); + return; + } + else if (acpi_lapic) + printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n"); + + printk("Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification); + + /* + * Now see if we need to read further. + */ + if (mpf->mpf_feature1 != 0) { + + printk(KERN_INFO "Default MP configuration #%d\n", mpf->mpf_feature1); + construct_default_ISA_mptable(mpf->mpf_feature1); + + } else if (mpf->mpf_physptr) { + + /* + * Read the physical hardware table. Anything here will + * override the defaults. + */ + if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) { + smp_found_config = 0; + printk(KERN_ERR "BIOS bug, MP table errors detected!...\n"); + printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n"); + return; + } + /* + * If there are no explicit MP IRQ entries, then we are + * broken. We set up most of the low 16 IO-APIC pins to + * ISA defaults and hope it will work. + */ + if (!mp_irq_entries) { + struct mpc_config_bus bus; + + printk(KERN_ERR "BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n"); + + bus.mpc_type = MP_BUS; + bus.mpc_busid = 0; + memcpy(bus.mpc_bustype, "ISA ", 6); + MP_bus_info(&bus); + + construct_default_ioirq_mptable(0); + } + + } else + BUG(); + + printk(KERN_INFO "Processors: %d\n", num_processors); + /* + * Only use the first configuration found. + */ +} + +static int __init smp_scan_config (unsigned long base, unsigned long length) +{ + extern void __bad_mpf_size(void); + unsigned int *bp = phys_to_virt(base); + struct intel_mp_floating *mpf; + + Dprintk("Scan SMP from %p for %ld bytes.\n", bp,length); + if (sizeof(*mpf) != 16) + __bad_mpf_size(); + + while (length > 0) { + mpf = (struct intel_mp_floating *)bp; + if ((*bp == SMP_MAGIC_IDENT) && + (mpf->mpf_length == 1) && + !mpf_checksum((unsigned char *)bp, 16) && + ((mpf->mpf_specification == 1) + || (mpf->mpf_specification == 4)) ) { + + smp_found_config = 1; + reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE); + if (mpf->mpf_physptr) + reserve_bootmem_generic(mpf->mpf_physptr, PAGE_SIZE); + mpf_found = mpf; + return 1; + } + bp += 4; + length -= 16; + } + return 0; +} + +void __init find_smp_config(void) +{ + unsigned int address; + + /* + * FIXME: Linux assumes you have 640K of base ram.. + * this continues the error... + * + * 1) Scan the bottom 1K for a signature + * 2) Scan the top 1K of base RAM + * 3) Scan the 64K of bios + */ + if (smp_scan_config(0x0,0x400) || + smp_scan_config(639*0x400,0x400) || + smp_scan_config(0xF0000,0x10000)) + return; + /* + * If it is an SMP machine we should know now. + * + * there is a real-mode segmented pointer pointing to the + * 4K EBDA area at 0x40E, calculate and scan it here. + * + * NOTE! There are Linux loaders that will corrupt the EBDA + * area, and as such this kind of SMP config may be less + * trustworthy, simply because the SMP table may have been + * stomped on during early boot. These loaders are buggy and + * should be fixed. + */ + + address = *(unsigned short *)phys_to_virt(0x40E); + address <<= 4; + if (smp_scan_config(address, 0x1000)) + return; + + /* If we have come this far, we did not find an MP table */ + printk(KERN_INFO "No mptable found.\n"); +} + +/* -------------------------------------------------------------------------- + ACPI-based MP Configuration + -------------------------------------------------------------------------- */ + +#ifdef CONFIG_ACPI + +void __init mp_register_lapic_address(u64 address) +{ + mp_lapic_addr = (unsigned long) address; + set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr); + if (boot_cpu_id == -1U) + boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID)); +} + +void __cpuinit mp_register_lapic (u8 id, u8 enabled) +{ + struct mpc_config_processor processor; + int boot_cpu = 0; + + if (id == boot_cpu_id) + boot_cpu = 1; + + processor.mpc_type = MP_PROCESSOR; + processor.mpc_apicid = id; + processor.mpc_apicver = 0; + processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0); + processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0); + processor.mpc_cpufeature = 0; + processor.mpc_featureflag = 0; + processor.mpc_reserved[0] = 0; + processor.mpc_reserved[1] = 0; + + MP_processor_info(&processor); +} + +#define MP_ISA_BUS 0 +#define MP_MAX_IOAPIC_PIN 127 + +static struct mp_ioapic_routing { + int apic_id; + int gsi_start; + int gsi_end; + u32 pin_programmed[4]; +} mp_ioapic_routing[MAX_IO_APICS]; + +static int mp_find_ioapic(int gsi) +{ + int i = 0; + + /* Find the IOAPIC that manages this GSI. */ + for (i = 0; i < nr_ioapics; i++) { + if ((gsi >= mp_ioapic_routing[i].gsi_start) + && (gsi <= mp_ioapic_routing[i].gsi_end)) + return i; + } + + printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); + return -1; +} + +static u8 uniq_ioapic_id(u8 id) +{ + int i; + DECLARE_BITMAP(used, 256); + bitmap_zero(used, 256); + for (i = 0; i < nr_ioapics; i++) { + struct mpc_config_ioapic *ia = &mp_ioapics[i]; + __set_bit(ia->mpc_apicid, used); + } + if (!test_bit(id, used)) + return id; + return find_first_zero_bit(used, 256); +} + +void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base) +{ + int idx = 0; + + if (bad_ioapic(address)) + return; + + idx = nr_ioapics; + + mp_ioapics[idx].mpc_type = MP_IOAPIC; + mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE; + mp_ioapics[idx].mpc_apicaddr = address; + + set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); + mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id); + mp_ioapics[idx].mpc_apicver = 0; + + /* + * Build basic IRQ lookup table to facilitate gsi->io_apic lookups + * and to prevent reprogramming of IOAPIC pins (PCI IRQs). + */ + mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid; + mp_ioapic_routing[idx].gsi_start = gsi_base; + mp_ioapic_routing[idx].gsi_end = gsi_base + + io_apic_get_redir_entries(idx); + + printk(KERN_INFO "IOAPIC[%d]: apic_id %d, address 0x%x, " + "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, + mp_ioapics[idx].mpc_apicaddr, + mp_ioapic_routing[idx].gsi_start, + mp_ioapic_routing[idx].gsi_end); + + nr_ioapics++; +} + +void __init +mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) +{ + struct mpc_config_intsrc intsrc; + int ioapic = -1; + int pin = -1; + + /* + * Convert 'gsi' to 'ioapic.pin'. + */ + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) + return; + pin = gsi - mp_ioapic_routing[ioapic].gsi_start; + + /* + * TBD: This check is for faulty timer entries, where the override + * erroneously sets the trigger to level, resulting in a HUGE + * increase of timer interrupts! + */ + if ((bus_irq == 0) && (trigger == 3)) + trigger = 1; + + intsrc.mpc_type = MP_INTSRC; + intsrc.mpc_irqtype = mp_INT; + intsrc.mpc_irqflag = (trigger << 2) | polarity; + intsrc.mpc_srcbus = MP_ISA_BUS; + intsrc.mpc_srcbusirq = bus_irq; /* IRQ */ + intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */ + intsrc.mpc_dstirq = pin; /* INTIN# */ + + Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n", + intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, + (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, + intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq); + + mp_irqs[mp_irq_entries] = intsrc; + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!\n"); +} + +void __init mp_config_acpi_legacy_irqs(void) +{ + struct mpc_config_intsrc intsrc; + int i = 0; + int ioapic = -1; + + /* + * Fabricate the legacy ISA bus (bus #31). + */ + set_bit(MP_ISA_BUS, mp_bus_not_pci); + + /* + * Locate the IOAPIC that manages the ISA IRQs (0-15). + */ + ioapic = mp_find_ioapic(0); + if (ioapic < 0) + return; + + intsrc.mpc_type = MP_INTSRC; + intsrc.mpc_irqflag = 0; /* Conforming */ + intsrc.mpc_srcbus = MP_ISA_BUS; + intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; + + /* + * Use the default configuration for the IRQs 0-15. Unless + * overridden by (MADT) interrupt source override entries. + */ + for (i = 0; i < 16; i++) { + int idx; + + for (idx = 0; idx < mp_irq_entries; idx++) { + struct mpc_config_intsrc *irq = mp_irqs + idx; + + /* Do we already have a mapping for this ISA IRQ? */ + if (irq->mpc_srcbus == MP_ISA_BUS && irq->mpc_srcbusirq == i) + break; + + /* Do we already have a mapping for this IOAPIC pin */ + if ((irq->mpc_dstapic == intsrc.mpc_dstapic) && + (irq->mpc_dstirq == i)) + break; + } + + if (idx != mp_irq_entries) { + printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i); + continue; /* IRQ already used */ + } + + intsrc.mpc_irqtype = mp_INT; + intsrc.mpc_srcbusirq = i; /* Identity mapped */ + intsrc.mpc_dstirq = i; + + Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, " + "%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, + (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, + intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, + intsrc.mpc_dstirq); + + mp_irqs[mp_irq_entries] = intsrc; + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!\n"); + } +} + +int mp_register_gsi(u32 gsi, int triggering, int polarity) +{ + int ioapic = -1; + int ioapic_pin = 0; + int idx, bit = 0; + + if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) + return gsi; + + /* Don't set up the ACPI SCI because it's already set up */ + if (acpi_gbl_FADT.sci_interrupt == gsi) + return gsi; + + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) { + printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); + return gsi; + } + + ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_start; + + /* + * Avoid pin reprogramming. PRTs typically include entries + * with redundant pin->gsi mappings (but unique PCI devices); + * we only program the IOAPIC on the first. + */ + bit = ioapic_pin % 32; + idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32); + if (idx > 3) { + printk(KERN_ERR "Invalid reference to IOAPIC pin " + "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, + ioapic_pin); + return gsi; + } + if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) { + Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n", + mp_ioapic_routing[ioapic].apic_id, ioapic_pin); + return gsi; + } + + mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit); + + io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, + triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, + polarity == ACPI_ACTIVE_HIGH ? 0 : 1); + return gsi; +} +#endif /*CONFIG_ACPI*/ |