diff options
Diffstat (limited to 'arch')
50 files changed, 656 insertions, 1341 deletions
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c index 8bf4153..3bf6304 100644 --- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c @@ -13,6 +13,7 @@ #include <linux/platform_device.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> +#include <linux/gpio.h> #include <linux/spi/flash.h> #include <linux/spi/spi.h> #include <linux/spi/orion_spi.h> @@ -53,6 +54,11 @@ static void __init rd88f6192_init(void) */ kirkwood_init(); + orion_gpio_set_valid(RD88F6192_GPIO_USB_VBUS, 1); + if (gpio_request(RD88F6192_GPIO_USB_VBUS, "USB VBUS") != 0 || + gpio_direction_output(RD88F6192_GPIO_USB_VBUS, 1) != 0) + pr_err("RD-88F6192-NAS: failed to setup USB VBUS GPIO\n"); + kirkwood_ehci_init(); kirkwood_ge00_init(&rd88f6192_ge00_data); kirkwood_sata_init(&rd88f6192_sata_data); diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index b31ca4c..8f159db 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -12,6 +12,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/delay.h> #include <linux/platform_device.h> #include <linux/pci.h> #include <linux/irq.h> @@ -32,6 +33,7 @@ #define DNS323_GPIO_LED_RIGHT_AMBER 1 #define DNS323_GPIO_LED_LEFT_AMBER 2 +#define DNS323_GPIO_SYSTEM_UP 3 #define DNS323_GPIO_LED_POWER 5 #define DNS323_GPIO_OVERTEMP 6 #define DNS323_GPIO_RTC 7 @@ -239,7 +241,7 @@ static struct gpio_led dns323_leds[] = { { .name = "power:blue", .gpio = DNS323_GPIO_LED_POWER, - .active_low = 1, + .default_state = LEDS_GPIO_DEFSTATE_ON, }, { .name = "right:amber", .gpio = DNS323_GPIO_LED_RIGHT_AMBER, @@ -334,7 +336,7 @@ static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = { { 0, MPP_UNUSED }, { 1, MPP_GPIO }, /* right amber LED (sata ch0) */ { 2, MPP_GPIO }, /* left amber LED (sata ch1) */ - { 3, MPP_UNUSED }, + { 3, MPP_GPIO }, /* system up flag */ { 4, MPP_GPIO }, /* power button LED */ { 5, MPP_GPIO }, /* power button LED */ { 6, MPP_GPIO }, /* GMT G751-2f overtemp */ @@ -372,13 +374,23 @@ static struct i2c_board_info __initdata dns323_i2c_devices[] = { }, }; -/* DNS-323 specific power off method */ -static void dns323_power_off(void) +/* DNS-323 rev. A specific power off method */ +static void dns323a_power_off(void) { pr_info("%s: triggering power-off...\n", __func__); gpio_set_value(DNS323_GPIO_POWER_OFF, 1); } +/* DNS-323 rev B specific power off method */ +static void dns323b_power_off(void) +{ + pr_info("%s: triggering power-off...\n", __func__); + /* Pin has to be changed to 1 and back to 0 to do actual power off. */ + gpio_set_value(DNS323_GPIO_POWER_OFF, 1); + mdelay(100); + gpio_set_value(DNS323_GPIO_POWER_OFF, 0); +} + static void __init dns323_init(void) { /* Setup basic Orion functions. Need to be called early. */ @@ -424,11 +436,20 @@ static void __init dns323_init(void) if (dns323_dev_id() == MV88F5182_DEV_ID) orion5x_sata_init(&dns323_sata_data); - /* register dns323 specific power-off method */ + /* The 5182 has flag to indicate the system is up. Without this flag + * set, power LED will flash and cannot be controlled via leds-gpio. + */ + if (dns323_dev_id() == MV88F5182_DEV_ID) + gpio_set_value(DNS323_GPIO_SYSTEM_UP, 1); + + /* Register dns323 specific power-off method */ if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 || gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0) pr_err("DNS323: failed to setup power-off GPIO\n"); - pm_power_off = dns323_power_off; + if (dns323_dev_id() == MV88F5182_DEV_ID) + pm_power_off = dns323b_power_off; + else + pm_power_off = dns323a_power_off; } /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index 1b4ad9d..cb0feca 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -15,6 +15,9 @@ #include <linux/mtd/physmap.h> #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> +#include <linux/leds.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> #include <net/dsa.h> #include <asm/mach-types.h> #include <asm/gpio.h> @@ -24,6 +27,80 @@ #include "common.h" #include "mpp.h" +/* + * LEDs attached to GPIO + */ +static struct gpio_led wrt350n_v2_led_pins[] = { + { + .name = "wrt350nv2:green:power", + .gpio = 0, + .active_low = 1, + }, { + .name = "wrt350nv2:green:security", + .gpio = 1, + .active_low = 1, + }, { + .name = "wrt350nv2:orange:power", + .gpio = 5, + .active_low = 1, + }, { + .name = "wrt350nv2:green:usb", + .gpio = 6, + .active_low = 1, + }, { + .name = "wrt350nv2:green:wireless", + .gpio = 7, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data wrt350n_v2_led_data = { + .leds = wrt350n_v2_led_pins, + .num_leds = ARRAY_SIZE(wrt350n_v2_led_pins), +}; + +static struct platform_device wrt350n_v2_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &wrt350n_v2_led_data, + }, +}; + +/* + * Buttons attached to GPIO + */ +static struct gpio_keys_button wrt350n_v2_buttons[] = { + { + .code = KEY_RESTART, + .gpio = 3, + .desc = "Reset Button", + .active_low = 1, + }, { + .code = KEY_WLAN, + .gpio = 2, + .desc = "WPS Button", + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data wrt350n_v2_button_data = { + .buttons = wrt350n_v2_buttons, + .nbuttons = ARRAY_SIZE(wrt350n_v2_buttons), +}; + +static struct platform_device wrt350n_v2_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &wrt350n_v2_button_data, + }, +}; + +/* + * General setup + */ static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = { { 0, MPP_GPIO }, /* Power LED green (0=on) */ { 1, MPP_GPIO }, /* Security LED (0=on) */ @@ -140,6 +217,8 @@ static void __init wrt350n_v2_init(void) orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE, WRT350N_V2_NOR_BOOT_SIZE); platform_device_register(&wrt350n_v2_nor_flash); + platform_device_register(&wrt350n_v2_leds); + platform_device_register(&wrt350n_v2_button_device); } static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 74446cf..da3156d86 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -457,6 +457,7 @@ static struct pxaficp_platform_data corgi_ficp_platform_data = { * USB Device Controller */ static struct pxa2xx_udc_mach_info udc_info __initdata = { + .gpio_vbus = -1, /* no connect GPIO; corgi can't tell connection status */ .gpio_pullup = CORGI_GPIO_USB_PULLUP, }; diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h index b13dc02..9c78785 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h @@ -169,7 +169,6 @@ #define GPIO86_nSDCS2 MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH) #define GPIO87_nSDCS3 MFP_CFG_OUT(GPIO87, AF0, DRIVE_HIGH) #define GPIO88_RDnWR MFP_CFG_OUT(GPIO88, AF0, DRIVE_HIGH) -#define GPIO89_nACRESET MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH) /* USB */ #define GPIO9_USB_RCV MFP_CFG_IN(GPIO9, AF1) @@ -186,6 +185,9 @@ #define GPIO30_ASSP_TXD MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW) #define GPIO31_ASSP_SFRM_IN MFP_CFG_IN(GPIO31, AF1) #define GPIO31_ASSP_SFRM_OUT MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW) -#endif + +/* AC97 */ +#define GPIO89_AC97_nRESET MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH) +#endif /* CONFIG_CPU_PXA26x */ #endif /* __ASM_ARCH_MFP_PXA25X_H */ diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 6112af4..1beb40f 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -164,8 +164,11 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state) saved_icmr[i] = _ICMR(irq); _ICMR(irq) = 0; } - for (i = 0; i < pxa_internal_irq_nr; i++) - saved_ipr[i] = IPR(i); + + if (cpu_is_pxa27x() || cpu_is_pxa3xx()) { + for (i = 0; i < pxa_internal_irq_nr; i++) + saved_ipr[i] = IPR(i); + } return 0; } @@ -174,12 +177,15 @@ static int pxa_irq_resume(struct sys_device *dev) { int i, irq = PXA_IRQ(0); + if (cpu_is_pxa27x() || cpu_is_pxa3xx()) { + for (i = 0; i < pxa_internal_irq_nr; i++) + IPR(i) = saved_ipr[i]; + } + for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) { _ICMR(irq) = saved_icmr[i]; _ICLR(irq) = 0; } - for (i = 0; i < pxa_internal_irq_nr; i++) - IPR(i) = saved_ipr[i]; ICCR = 1; return 0; diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c index d41d41d..54c84a4 100644 --- a/arch/arm/plat-orion/pcie.c +++ b/arch/arm/plat-orion/pcie.c @@ -133,6 +133,12 @@ static void __init orion_pcie_setup_wins(void __iomem *base, } /* + * Round up 'size' to the nearest power of two. + */ + if ((size & (size - 1)) != 0) + size = 1 << fls(size); + + /* * Setup BAR[1] to all DRAM banks. */ writel(dram->cs[0].base, base + PCIE_BAR_LO_OFF(1)); diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index c3a74ce..5a79fc6 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Wed Dec 16 20:06:34 2009 +# Last update: Thu Jan 28 22:15:54 2010 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -2536,6 +2536,7 @@ davinci_dm6467tevm MACH_DAVINCI_DM6467TEVM DAVINCI_DM6467TEVM 2548 c3ax03 MACH_C3AX03 C3AX03 2549 mxt_td60 MACH_MXT_TD60 MXT_TD60 2550 esyx MACH_ESYX ESYX 2551 +dove_db2 MACH_DOVE_DB2 DOVE_DB2 2552 bulldog MACH_BULLDOG BULLDOG 2553 derell_me2000 MACH_DERELL_ME2000 DERELL_ME2000 2554 bcmring_base MACH_BCMRING_BASE BCMRING_BASE 2555 @@ -2555,6 +2556,7 @@ iseo MACH_ISEO ISEO 2568 cezanne MACH_CEZANNE CEZANNE 2569 lucca MACH_LUCCA LUCCA 2570 supersmart MACH_SUPERSMART SUPERSMART 2571 +arm11_board MACH_CS_MISANO CS_MISANO 2572 magnolia2 MACH_MAGNOLIA2 MAGNOLIA2 2573 emxx MACH_EMXX EMXX 2574 outlaw MACH_OUTLAW OUTLAW 2575 @@ -2578,3 +2580,59 @@ glacier MACH_GLACIER GLACIER 2592 phrazer_bulldog MACH_PHRAZER_BULLDOG PHRAZER_BULLDOG 2593 omap3_bulldog MACH_OMAP3_BULLDOG OMAP3_BULLDOG 2594 pca101 MACH_PCA101 PCA101 2595 +buzzc MACH_BUZZC BUZZC 2596 +sasie2 MACH_SASIE2 SASIE2 2597 +davinci_cio MACH_DAVINCI_CIO DAVINCI_CIO 2598 +smartmeter_dl MACH_SMARTMETER_DL SMARTMETER_DL 2599 +wzl6410 MACH_WZL6410 WZL6410 2600 +wzl6410m MACH_WZL6410M WZL6410M 2601 +wzl6410f MACH_WZL6410F WZL6410F 2602 +wzl6410i MACH_WZL6410I WZL6410I 2603 +spacecom1 MACH_SPACECOM1 SPACECOM1 2604 +pingu920 MACH_PINGU920 PINGU920 2605 +bravoc MACH_BRAVOC BRAVOC 2606 +cybo2440 MACH_CYBO2440 CYBO2440 2607 +vdssw MACH_VDSSW VDSSW 2608 +romulus MACH_ROMULUS ROMULUS 2609 +omap_magic MACH_OMAP_MAGIC OMAP_MAGIC 2610 +eltd100 MACH_ELTD100 ELTD100 2611 +capc7117 MACH_CAPC7117 CAPC7117 2612 +swan MACH_SWAN SWAN 2613 +veu MACH_VEU VEU 2614 +rm2 MACH_RM2 RM2 2615 +tt2100 MACH_TT2100 TT2100 2616 +venice MACH_VENICE VENICE 2617 +pc7323 MACH_PC7323 PC7323 2618 +masp MACH_MASP MASP 2619 +fujitsu_tvstbsoc0 MACH_FUJITSU_TVSTBSOC FUJITSU_TVSTBSOC 2620 +fujitsu_tvstbsoc1 MACH_FUJITSU_TVSTBSOC1 FUJITSU_TVSTBSOC1 2621 +lexikon MACH_LEXIKON LEXIKON 2622 +mini2440v2 MACH_MINI2440V2 MINI2440V2 2623 +icontrol MACH_ICONTROL ICONTROL 2624 +sheevad MACH_SHEEVAD SHEEVAD 2625 +qsd8x50a_st1_1 MACH_QSD8X50A_ST1_1 QSD8X50A_ST1_1 2626 +qsd8x50a_st1_5 MACH_QSD8X50A_ST1_5 QSD8X50A_ST1_5 2627 +bee MACH_BEE BEE 2628 +mx23evk MACH_MX23EVK MX23EVK 2629 +ap4evb MACH_AP4EVB AP4EVB 2630 +stockholm MACH_STOCKHOLM STOCKHOLM 2631 +lpc_h3131 MACH_LPC_H3131 LPC_H3131 2632 +stingray MACH_STINGRAY STINGRAY 2633 +kraken MACH_KRAKEN KRAKEN 2634 +gw2388 MACH_GW2388 GW2388 2635 +jadecpu MACH_JADECPU JADECPU 2636 +carlisle MACH_CARLISLE CARLISLE 2637 +lux_sf9 MACH_LUX_SFT9 LUX_SFT9 2638 +nemid_tb MACH_NEMID_TB NEMID_TB 2639 +terrier MACH_TERRIER TERRIER 2640 +turbot MACH_TURBOT TURBOT 2641 +sanddab MACH_SANDDAB SANDDAB 2642 +mx35_cicada MACH_MX35_CICADA MX35_CICADA 2643 +ghi2703d MACH_GHI2703D GHI2703D 2644 +lux_sfx9 MACH_LUX_SFX9 LUX_SFX9 2645 +lux_sf9g MACH_LUX_SF9G LUX_SF9G 2646 +lux_edk9 MACH_LUX_EDK9 LUX_EDK9 2647 +hw90240 MACH_HW90240 HW90240 2648 +dm365_leopard MACH_DM365_LEOPARD DM365_LEOPARD 2649 +mityomapl138 MACH_MITYOMAPL138 MITYOMAPL138 2650 +scat110 MACH_SCAT110 SCAT110 2651 diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 9541171..8b5d174 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1311,6 +1311,7 @@ config SYS_SUPPORTS_ZBOOT select HAVE_KERNEL_GZIP select HAVE_KERNEL_BZIP2 select HAVE_KERNEL_LZMA + select HAVE_KERNEL_LZO config SYS_SUPPORTS_ZBOOT_UART16550 bool diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile index 671d344..9df903d 100644 --- a/arch/mips/boot/compressed/Makefile +++ b/arch/mips/boot/compressed/Makefile @@ -14,8 +14,11 @@ # compressed kernel load addr: VMLINUZ_LOAD_ADDRESS > VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE VMLINUX_SIZE := $(shell wc -c $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | cut -d' ' -f1) -VMLINUX_SIZE := $(shell [ -n "$(VMLINUX_SIZE)" ] && echo $$(($(VMLINUX_SIZE) + (65536 - $(VMLINUX_SIZE) % 65536)))) -VMLINUZ_LOAD_ADDRESS := 0x$(shell [ -n "$(VMLINUX_SIZE)" ] && printf %x $$(($(VMLINUX_LOAD_ADDRESS) + $(VMLINUX_SIZE)))) +VMLINUX_SIZE := $(shell [ -n "$(VMLINUX_SIZE)" ] && echo -n $$(($(VMLINUX_SIZE) + (65536 - $(VMLINUX_SIZE) % 65536)))) +# VMLINUZ_LOAD_ADDRESS = concat "high32 of VMLINUX_LOAD_ADDRESS" and "(low32 of VMLINUX_LOAD_ADDRESS) + VMLINUX_SIZE" +HIGH32 := $(shell A=$(VMLINUX_LOAD_ADDRESS); [ $${\#A} -gt 10 ] && expr substr "$(VMLINUX_LOAD_ADDRESS)" 3 $$(($${\#A} - 10))) +LOW32 := $(shell [ -n "$(HIGH32)" ] && A=11 || A=3; expr substr "$(VMLINUX_LOAD_ADDRESS)" $${A} 8) +VMLINUZ_LOAD_ADDRESS := 0x$(shell [ -n "$(VMLINUX_SIZE)" -a -n "$(LOW32)" ] && printf "$(HIGH32)%08x" $$(($(VMLINUX_SIZE) + 0x$(LOW32)))) # set the default size of the mallocing area for decompressing BOOT_HEAP_SIZE := 0x400000 @@ -41,9 +44,11 @@ $(obj)/vmlinux.bin: $(KBUILD_IMAGE) suffix_$(CONFIG_KERNEL_GZIP) = gz suffix_$(CONFIG_KERNEL_BZIP2) = bz2 suffix_$(CONFIG_KERNEL_LZMA) = lzma +suffix_$(CONFIG_KERNEL_LZO) = lzo tool_$(CONFIG_KERNEL_GZIP) = gzip tool_$(CONFIG_KERNEL_BZIP2) = bzip2 tool_$(CONFIG_KERNEL_LZMA) = lzma +tool_$(CONFIG_KERNEL_LZO) = lzo $(obj)/vmlinux.$(suffix_y): $(obj)/vmlinux.bin $(call if_changed,$(tool_y)) diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c index e48fd72..55d02b3 100644 --- a/arch/mips/boot/compressed/decompress.c +++ b/arch/mips/boot/compressed/decompress.c @@ -77,6 +77,10 @@ void *memset(void *s, int c, size_t n) #include "../../../../lib/decompress_unlzma.c" #endif +#ifdef CONFIG_KERNEL_LZO +#include "../../../../lib/decompress_unlzo.c" +#endif + void decompress_kernel(unsigned long boot_heap_start) { int zimage_size; diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h index 0696036..dea4aed 100644 --- a/arch/mips/include/asm/irq.h +++ b/arch/mips/include/asm/irq.h @@ -135,6 +135,7 @@ extern void free_irqno(unsigned int irq); #define CP0_LEGACY_COMPARE_IRQ 7 extern int cp0_compare_irq; +extern int cp0_compare_irq_shift; extern int cp0_perfcount_irq; #endif /* _ASM_IRQ_H */ diff --git a/arch/mips/include/asm/mach-powertv/asic_reg_map.h b/arch/mips/include/asm/mach-powertv/asic_reg_map.h new file mode 100644 index 0000000..6f26cb0 --- /dev/null +++ b/arch/mips/include/asm/mach-powertv/asic_reg_map.h @@ -0,0 +1,90 @@ +/* + * asic_reg_map.h + * + * A macro-enclosed list of the elements for the register_map structure for + * use in defining and manipulating the structure. + * + * Copyright (C) 2009 Cisco Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +REGISTER_MAP_ELEMENT(eic_slow0_strt_add) +REGISTER_MAP_ELEMENT(eic_cfg_bits) +REGISTER_MAP_ELEMENT(eic_ready_status) +REGISTER_MAP_ELEMENT(chipver3) +REGISTER_MAP_ELEMENT(chipver2) +REGISTER_MAP_ELEMENT(chipver1) +REGISTER_MAP_ELEMENT(chipver0) +REGISTER_MAP_ELEMENT(uart1_intstat) +REGISTER_MAP_ELEMENT(uart1_inten) +REGISTER_MAP_ELEMENT(uart1_config1) +REGISTER_MAP_ELEMENT(uart1_config2) +REGISTER_MAP_ELEMENT(uart1_divisorhi) +REGISTER_MAP_ELEMENT(uart1_divisorlo) +REGISTER_MAP_ELEMENT(uart1_data) +REGISTER_MAP_ELEMENT(uart1_status) +REGISTER_MAP_ELEMENT(int_stat_3) +REGISTER_MAP_ELEMENT(int_stat_2) +REGISTER_MAP_ELEMENT(int_stat_1) +REGISTER_MAP_ELEMENT(int_stat_0) +REGISTER_MAP_ELEMENT(int_config) +REGISTER_MAP_ELEMENT(int_int_scan) +REGISTER_MAP_ELEMENT(ien_int_3) +REGISTER_MAP_ELEMENT(ien_int_2) +REGISTER_MAP_ELEMENT(ien_int_1) +REGISTER_MAP_ELEMENT(ien_int_0) +REGISTER_MAP_ELEMENT(int_level_3_3) +REGISTER_MAP_ELEMENT(int_level_3_2) +REGISTER_MAP_ELEMENT(int_level_3_1) +REGISTER_MAP_ELEMENT(int_level_3_0) +REGISTER_MAP_ELEMENT(int_level_2_3) +REGISTER_MAP_ELEMENT(int_level_2_2) +REGISTER_MAP_ELEMENT(int_level_2_1) +REGISTER_MAP_ELEMENT(int_level_2_0) +REGISTER_MAP_ELEMENT(int_level_1_3) +REGISTER_MAP_ELEMENT(int_level_1_2) +REGISTER_MAP_ELEMENT(int_level_1_1) +REGISTER_MAP_ELEMENT(int_level_1_0) +REGISTER_MAP_ELEMENT(int_level_0_3) +REGISTER_MAP_ELEMENT(int_level_0_2) +REGISTER_MAP_ELEMENT(int_level_0_1) +REGISTER_MAP_ELEMENT(int_level_0_0) +REGISTER_MAP_ELEMENT(int_docsis_en) +REGISTER_MAP_ELEMENT(mips_pll_setup) +REGISTER_MAP_ELEMENT(usb_fs) +REGISTER_MAP_ELEMENT(test_bus) +REGISTER_MAP_ELEMENT(crt_spare) +REGISTER_MAP_ELEMENT(usb2_ohci_int_mask) +REGISTER_MAP_ELEMENT(usb2_strap) +REGISTER_MAP_ELEMENT(ehci_hcapbase) +REGISTER_MAP_ELEMENT(ohci_hc_revision) +REGISTER_MAP_ELEMENT(bcm1_bs_lmi_steer) +REGISTER_MAP_ELEMENT(usb2_control) +REGISTER_MAP_ELEMENT(usb2_stbus_obc) +REGISTER_MAP_ELEMENT(usb2_stbus_mess_size) +REGISTER_MAP_ELEMENT(usb2_stbus_chunk_size) +REGISTER_MAP_ELEMENT(pcie_regs) +REGISTER_MAP_ELEMENT(tim_ch) +REGISTER_MAP_ELEMENT(tim_cl) +REGISTER_MAP_ELEMENT(gpio_dout) +REGISTER_MAP_ELEMENT(gpio_din) +REGISTER_MAP_ELEMENT(gpio_dir) +REGISTER_MAP_ELEMENT(watchdog) +REGISTER_MAP_ELEMENT(front_panel) +REGISTER_MAP_ELEMENT(misc_clk_ctl1) +REGISTER_MAP_ELEMENT(misc_clk_ctl2) +REGISTER_MAP_ELEMENT(crt_ext_ctl) +REGISTER_MAP_ELEMENT(register_maps) diff --git a/arch/mips/include/asm/mach-powertv/asic_regs.h b/arch/mips/include/asm/mach-powertv/asic_regs.h index 9a65c93..1e11236 100644 --- a/arch/mips/include/asm/mach-powertv/asic_regs.h +++ b/arch/mips/include/asm/mach-powertv/asic_regs.h @@ -35,11 +35,12 @@ enum asic_type { #define CRONUS_11 0x0B4C1C21 #define CRONUSLITE_10 0x0B4C1C40 -#define NAND_FLASH_BASE 0x03000000 -#define ZEUS_IO_BASE 0x09000000 +#define NAND_FLASH_BASE 0x03000000 #define CALLIOPE_IO_BASE 0x08000000 -#define CRONUS_IO_BASE 0x09000000 -#define ASIC_IO_SIZE 0x01000000 +#define CRONUS_IO_BASE 0x09000000 +#define ZEUS_IO_BASE 0x09000000 + +#define ASIC_IO_SIZE 0x01000000 /* Definitions for backward compatibility */ #define UART1_INTSTAT uart1_intstat @@ -52,96 +53,62 @@ enum asic_type { #define UART1_STATUS uart1_status /* ASIC register enumeration */ +union register_map_entry { + unsigned long phys; + u32 *virt; +}; + +#define REGISTER_MAP_ELEMENT(x) union register_map_entry x; struct register_map { - u32 eic_slow0_strt_add; - u32 eic_cfg_bits; - u32 eic_ready_status; - - u32 chipver3; - u32 chipver2; - u32 chipver1; - u32 chipver0; - - u32 uart1_intstat; - u32 uart1_inten; - u32 uart1_config1; - u32 uart1_config2; - u32 uart1_divisorhi; - u32 uart1_divisorlo; - u32 uart1_data; - u32 uart1_status; - - u32 int_stat_3; - u32 int_stat_2; - u32 int_stat_1; - u32 int_stat_0; - u32 int_config; - u32 int_int_scan; - u32 ien_int_3; - u32 ien_int_2; - u32 ien_int_1; - u32 ien_int_0; - u32 int_level_3_3; - u32 int_level_3_2; - u32 int_level_3_1; - u32 int_level_3_0; - u32 int_level_2_3; - u32 int_level_2_2; - u32 int_level_2_1; - u32 int_level_2_0; - u32 int_level_1_3; - u32 int_level_1_2; - u32 int_level_1_1; - u32 int_level_1_0; - u32 int_level_0_3; - u32 int_level_0_2; - u32 int_level_0_1; - u32 int_level_0_0; - u32 int_docsis_en; - - u32 mips_pll_setup; - u32 usb_fs; - u32 test_bus; - u32 crt_spare; - u32 usb2_ohci_int_mask; - u32 usb2_strap; - u32 ehci_hcapbase; - u32 ohci_hc_revision; - u32 bcm1_bs_lmi_steer; - u32 usb2_control; - u32 usb2_stbus_obc; - u32 usb2_stbus_mess_size; - u32 usb2_stbus_chunk_size; - - u32 pcie_regs; - u32 tim_ch; - u32 tim_cl; - u32 gpio_dout; - u32 gpio_din; - u32 gpio_dir; - u32 watchdog; - u32 front_panel; - - u32 register_maps; +#include <asm/mach-powertv/asic_reg_map.h> }; +#undef REGISTER_MAP_ELEMENT + +/** + * register_map_offset_phys - add an offset to the physical address + * @map: Pointer to the &struct register_map + * @offset: Value to add + * + * Only adds the base to non-zero physical addresses + */ +static inline void register_map_offset_phys(struct register_map *map, + unsigned long offset) +{ +#define REGISTER_MAP_ELEMENT(x) do { \ + if (map->x.phys != 0) \ + map->x.phys += offset; \ + } while (false); + +#include <asm/mach-powertv/asic_reg_map.h> +#undef REGISTER_MAP_ELEMENT +} + +/** + * register_map_virtualize - Convert ®ister_map to virtual addresses + * @map: Pointer to ®ister_map to virtualize + */ +static inline void register_map_virtualize(struct register_map *map) +{ +#define REGISTER_MAP_ELEMENT(x) do { \ + map->x.virt = (!map->x.phys) ? NULL : \ + UNCAC_ADDR(phys_to_virt(map->x.phys)); \ + } while (false); + +#include <asm/mach-powertv/asic_reg_map.h> +#undef REGISTER_MAP_ELEMENT +} -extern enum asic_type asic; -extern const struct register_map *register_map; -extern unsigned long asic_phy_base; /* Physical address of ASIC */ -extern unsigned long asic_base; /* Virtual address of ASIC */ +extern struct register_map _asic_register_map; /* * Macros to interface to registers through their ioremapped address - * asic_reg_offset Returns the offset of a given register from the start - * of the ASIC address space * asic_reg_phys_addr Returns the physical address of the given register * asic_reg_addr Returns the iomapped virtual address of the given * register. */ -#define asic_reg_offset(x) (register_map->x) -#define asic_reg_phys_addr(x) (asic_phy_base + asic_reg_offset(x)) -#define asic_reg_addr(x) \ - ((unsigned int *) (asic_base + asic_reg_offset(x))) +#define asic_reg_addr(x) (_asic_register_map.x.virt) +#define asic_reg_phys_addr(x) (virt_to_phys((void *) CAC_ADDR( \ + (unsigned long) asic_reg_addr(x)))) /* * The asic_reg macro is gone. It should be replaced by either asic_read or diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index a581d60..f4ab313 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -406,6 +406,16 @@ #define ST0_XX 0x80000000 /* MIPS IV naming */ /* + * Bitfields and bit numbers in the coprocessor 0 IntCtl register. (MIPSR2) + * + * Refer to your MIPS R4xx0 manual, chapter 5 for explanation. + */ +#define INTCTLB_IPPCI 26 +#define INTCTLF_IPPCI (_ULCAST_(7) << INTCTLB_IPPCI) +#define INTCTLB_IPTI 29 +#define INTCTLF_IPTI (_ULCAST_(7) << INTCTLB_IPTI) + +/* * Bitfields and bit numbers in the coprocessor 0 cause register. * * Refer to your MIPS R4xx0 manual, chapter 5 for explanation. @@ -434,6 +444,8 @@ #define CAUSEF_IV (_ULCAST_(1) << 23) #define CAUSEB_CE 28 #define CAUSEF_CE (_ULCAST_(3) << 28) +#define CAUSEB_TI 30 +#define CAUSEF_TI (_ULCAST_(1) << 30) #define CAUSEB_BD 31 #define CAUSEF_BD (_ULCAST_(1) << 31) diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index b469ad0..0b2450c 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -97,7 +97,7 @@ void mips_event_handler(struct clock_event_device *dev) */ static int c0_compare_int_pending(void) { - return (read_c0_cause() >> cp0_compare_irq) & 0x100; + return (read_c0_cause() >> cp0_compare_irq_shift) & (1ul << CAUSEB_IP); } /* diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 308e434..338dfe8 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1403,6 +1403,7 @@ extern void flush_tlb_handlers(void); * Timer interrupt */ int cp0_compare_irq; +int cp0_compare_irq_shift; /* * Performance counter IRQ or -1 if shared with timer @@ -1493,8 +1494,9 @@ void __cpuinit per_cpu_trap_init(void) * o read IntCtl.IPPCI to determine the performance counter interrupt */ if (cpu_has_mips_r2) { - cp0_compare_irq = (read_c0_intctl() >> 29) & 7; - cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7; + cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP; + cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7; + cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7; if (cp0_perfcount_irq == cp0_compare_irq) cp0_perfcount_irq = -1; } else { diff --git a/arch/mips/powertv/asic/asic-calliope.c b/arch/mips/powertv/asic/asic-calliope.c index 03d3884..1ae6623 100644 --- a/arch/mips/powertv/asic/asic-calliope.c +++ b/arch/mips/powertv/asic/asic-calliope.c @@ -23,76 +23,79 @@ * Description: Defines the platform resources for the SA settop. */ +#include <linux/init.h> #include <asm/mach-powertv/asic.h> -const struct register_map calliope_register_map = { - .eic_slow0_strt_add = 0x800000, - .eic_cfg_bits = 0x800038, - .eic_ready_status = 0x80004c, +#define CALLIOPE_ADDR(x) (CALLIOPE_IO_BASE + (x)) - .chipver3 = 0xA00800, - .chipver2 = 0xA00804, - .chipver1 = 0xA00808, - .chipver0 = 0xA0080c, +const struct register_map calliope_register_map __initdata = { + .eic_slow0_strt_add = {.phys = CALLIOPE_ADDR(0x800000)}, + .eic_cfg_bits = {.phys = CALLIOPE_ADDR(0x800038)}, + .eic_ready_status = {.phys = CALLIOPE_ADDR(0x80004c)}, + + .chipver3 = {.phys = CALLIOPE_ADDR(0xA00800)}, + .chipver2 = {.phys = CALLIOPE_ADDR(0xA00804)}, + .chipver1 = {.phys = CALLIOPE_ADDR(0xA00808)}, + .chipver0 = {.phys = CALLIOPE_ADDR(0xA0080c)}, /* The registers of IRBlaster */ - .uart1_intstat = 0xA01800, - .uart1_inten = 0xA01804, - .uart1_config1 = 0xA01808, - .uart1_config2 = 0xA0180C, - .uart1_divisorhi = 0xA01810, - .uart1_divisorlo = 0xA01814, - .uart1_data = 0xA01818, - .uart1_status = 0xA0181C, + .uart1_intstat = {.phys = CALLIOPE_ADDR(0xA01800)}, + .uart1_inten = {.phys = CALLIOPE_ADDR(0xA01804)}, + .uart1_config1 = {.phys = CALLIOPE_ADDR(0xA01808)}, + .uart1_config2 = {.phys = CALLIOPE_ADDR(0xA0180C)}, + .uart1_divisorhi = {.phys = CALLIOPE_ADDR(0xA01810)}, + .uart1_divisorlo = {.phys = CALLIOPE_ADDR(0xA01814)}, + .uart1_data = {.phys = CALLIOPE_ADDR(0xA01818)}, + .uart1_status = {.phys = CALLIOPE_ADDR(0xA0181C)}, - .int_stat_3 = 0xA02800, - .int_stat_2 = 0xA02804, - .int_stat_1 = 0xA02808, - .int_stat_0 = 0xA0280c, - .int_config = 0xA02810, - .int_int_scan = 0xA02818, - .ien_int_3 = 0xA02830, - .ien_int_2 = 0xA02834, - .ien_int_1 = 0xA02838, - .ien_int_0 = 0xA0283c, - .int_level_3_3 = 0xA02880, - .int_level_3_2 = 0xA02884, - .int_level_3_1 = 0xA02888, - .int_level_3_0 = 0xA0288c, - .int_level_2_3 = 0xA02890, - .int_level_2_2 = 0xA02894, - .int_level_2_1 = 0xA02898, - .int_level_2_0 = 0xA0289c, - .int_level_1_3 = 0xA028a0, - .int_level_1_2 = 0xA028a4, - .int_level_1_1 = 0xA028a8, - .int_level_1_0 = 0xA028ac, - .int_level_0_3 = 0xA028b0, - .int_level_0_2 = 0xA028b4, - .int_level_0_1 = 0xA028b8, - .int_level_0_0 = 0xA028bc, - .int_docsis_en = 0xA028F4, + .int_stat_3 = {.phys = CALLIOPE_ADDR(0xA02800)}, + .int_stat_2 = {.phys = CALLIOPE_ADDR(0xA02804)}, + .int_stat_1 = {.phys = CALLIOPE_ADDR(0xA02808)}, + .int_stat_0 = {.phys = CALLIOPE_ADDR(0xA0280c)}, + .int_config = {.phys = CALLIOPE_ADDR(0xA02810)}, + .int_int_scan = {.phys = CALLIOPE_ADDR(0xA02818)}, + .ien_int_3 = {.phys = CALLIOPE_ADDR(0xA02830)}, + .ien_int_2 = {.phys = CALLIOPE_ADDR(0xA02834)}, + .ien_int_1 = {.phys = CALLIOPE_ADDR(0xA02838)}, + .ien_int_0 = {.phys = CALLIOPE_ADDR(0xA0283c)}, + .int_level_3_3 = {.phys = CALLIOPE_ADDR(0xA02880)}, + .int_level_3_2 = {.phys = CALLIOPE_ADDR(0xA02884)}, + .int_level_3_1 = {.phys = CALLIOPE_ADDR(0xA02888)}, + .int_level_3_0 = {.phys = CALLIOPE_ADDR(0xA0288c)}, + .int_level_2_3 = {.phys = CALLIOPE_ADDR(0xA02890)}, + .int_level_2_2 = {.phys = CALLIOPE_ADDR(0xA02894)}, + .int_level_2_1 = {.phys = CALLIOPE_ADDR(0xA02898)}, + .int_level_2_0 = {.phys = CALLIOPE_ADDR(0xA0289c)}, + .int_level_1_3 = {.phys = CALLIOPE_ADDR(0xA028a0)}, + .int_level_1_2 = {.phys = CALLIOPE_ADDR(0xA028a4)}, + .int_level_1_1 = {.phys = CALLIOPE_ADDR(0xA028a8)}, + .int_level_1_0 = {.phys = CALLIOPE_ADDR(0xA028ac)}, + .int_level_0_3 = {.phys = CALLIOPE_ADDR(0xA028b0)}, + .int_level_0_2 = {.phys = CALLIOPE_ADDR(0xA028b4)}, + .int_level_0_1 = {.phys = CALLIOPE_ADDR(0xA028b8)}, + .int_level_0_0 = {.phys = CALLIOPE_ADDR(0xA028bc)}, + .int_docsis_en = {.phys = CALLIOPE_ADDR(0xA028F4)}, - .mips_pll_setup = 0x980000, - .usb_fs = 0x980030, /* -default 72800028- */ - .test_bus = 0x9800CC, - .crt_spare = 0x9800d4, - .usb2_ohci_int_mask = 0x9A000c, - .usb2_strap = 0x9A0014, - .ehci_hcapbase = 0x9BFE00, - .ohci_hc_revision = 0x9BFC00, - .bcm1_bs_lmi_steer = 0x9E0004, - .usb2_control = 0x9E0054, - .usb2_stbus_obc = 0x9BFF00, - .usb2_stbus_mess_size = 0x9BFF04, - .usb2_stbus_chunk_size = 0x9BFF08, + .mips_pll_setup = {.phys = CALLIOPE_ADDR(0x980000)}, + .usb_fs = {.phys = CALLIOPE_ADDR(0x980030)}, + .test_bus = {.phys = CALLIOPE_ADDR(0x9800CC)}, + .crt_spare = {.phys = CALLIOPE_ADDR(0x9800d4)}, + .usb2_ohci_int_mask = {.phys = CALLIOPE_ADDR(0x9A000c)}, + .usb2_strap = {.phys = CALLIOPE_ADDR(0x9A0014)}, + .ehci_hcapbase = {.phys = CALLIOPE_ADDR(0x9BFE00)}, + .ohci_hc_revision = {.phys = CALLIOPE_ADDR(0x9BFC00)}, + .bcm1_bs_lmi_steer = {.phys = CALLIOPE_ADDR(0x9E0004)}, + .usb2_control = {.phys = CALLIOPE_ADDR(0x9E0054)}, + .usb2_stbus_obc = {.phys = CALLIOPE_ADDR(0x9BFF00)}, + .usb2_stbus_mess_size = {.phys = CALLIOPE_ADDR(0x9BFF04)}, + .usb2_stbus_chunk_size = {.phys = CALLIOPE_ADDR(0x9BFF08)}, - .pcie_regs = 0x000000, /* -doesn't exist- */ - .tim_ch = 0xA02C10, - .tim_cl = 0xA02C14, - .gpio_dout = 0xA02c20, - .gpio_din = 0xA02c24, - .gpio_dir = 0xA02c2C, - .watchdog = 0xA02c30, - .front_panel = 0x000000, /* -not used- */ + .pcie_regs = {.phys = 0x000000}, /* -doesn't exist- */ + .tim_ch = {.phys = CALLIOPE_ADDR(0xA02C10)}, + .tim_cl = {.phys = CALLIOPE_ADDR(0xA02C14)}, + .gpio_dout = {.phys = CALLIOPE_ADDR(0xA02c20)}, + .gpio_din = {.phys = CALLIOPE_ADDR(0xA02c24)}, + .gpio_dir = {.phys = CALLIOPE_ADDR(0xA02c2C)}, + .watchdog = {.phys = CALLIOPE_ADDR(0xA02c30)}, + .front_panel = {.phys = 0x000000}, /* -not used- */ }; diff --git a/arch/mips/powertv/asic/asic-cronus.c b/arch/mips/powertv/asic/asic-cronus.c index 5f4589c..5bb64bf 100644 --- a/arch/mips/powertv/asic/asic-cronus.c +++ b/arch/mips/powertv/asic/asic-cronus.c @@ -23,76 +23,79 @@ * Description: Defines the platform resources for the SA settop. */ +#include <linux/init.h> #include <asm/mach-powertv/asic.h> -const struct register_map cronus_register_map = { - .eic_slow0_strt_add = 0x000000, - .eic_cfg_bits = 0x000038, - .eic_ready_status = 0x00004C, +#define CRONUS_ADDR(x) (CRONUS_IO_BASE + (x)) - .chipver3 = 0x2A0800, - .chipver2 = 0x2A0804, - .chipver1 = 0x2A0808, - .chipver0 = 0x2A080C, +const struct register_map cronus_register_map __initdata = { + .eic_slow0_strt_add = {.phys = CRONUS_ADDR(0x000000)}, + .eic_cfg_bits = {.phys = CRONUS_ADDR(0x000038)}, + .eic_ready_status = {.phys = CRONUS_ADDR(0x00004C)}, + + .chipver3 = {.phys = CRONUS_ADDR(0x2A0800)}, + .chipver2 = {.phys = CRONUS_ADDR(0x2A0804)}, + .chipver1 = {.phys = CRONUS_ADDR(0x2A0808)}, + .chipver0 = {.phys = CRONUS_ADDR(0x2A080C)}, /* The registers of IRBlaster */ - .uart1_intstat = 0x2A1800, - .uart1_inten = 0x2A1804, - .uart1_config1 = 0x2A1808, - .uart1_config2 = 0x2A180C, - .uart1_divisorhi = 0x2A1810, - .uart1_divisorlo = 0x2A1814, - .uart1_data = 0x2A1818, - .uart1_status = 0x2A181C, + .uart1_intstat = {.phys = CRONUS_ADDR(0x2A1800)}, + .uart1_inten = {.phys = CRONUS_ADDR(0x2A1804)}, + .uart1_config1 = {.phys = CRONUS_ADDR(0x2A1808)}, + .uart1_config2 = {.phys = CRONUS_ADDR(0x2A180C)}, + .uart1_divisorhi = {.phys = CRONUS_ADDR(0x2A1810)}, + .uart1_divisorlo = {.phys = CRONUS_ADDR(0x2A1814)}, + .uart1_data = {.phys = CRONUS_ADDR(0x2A1818)}, + .uart1_status = {.phys = CRONUS_ADDR(0x2A181C)}, - .int_stat_3 = 0x2A2800, - .int_stat_2 = 0x2A2804, - .int_stat_1 = 0x2A2808, - .int_stat_0 = 0x2A280C, - .int_config = 0x2A2810, - .int_int_scan = 0x2A2818, - .ien_int_3 = 0x2A2830, - .ien_int_2 = 0x2A2834, - .ien_int_1 = 0x2A2838, - .ien_int_0 = 0x2A283C, - .int_level_3_3 = 0x2A2880, - .int_level_3_2 = 0x2A2884, - .int_level_3_1 = 0x2A2888, - .int_level_3_0 = 0x2A288C, - .int_level_2_3 = 0x2A2890, - .int_level_2_2 = 0x2A2894, - .int_level_2_1 = 0x2A2898, - .int_level_2_0 = 0x2A289C, - .int_level_1_3 = 0x2A28A0, - .int_level_1_2 = 0x2A28A4, - .int_level_1_1 = 0x2A28A8, - .int_level_1_0 = 0x2A28AC, - .int_level_0_3 = 0x2A28B0, - .int_level_0_2 = 0x2A28B4, - .int_level_0_1 = 0x2A28B8, - .int_level_0_0 = 0x2A28BC, - .int_docsis_en = 0x2A28F4, + .int_stat_3 = {.phys = CRONUS_ADDR(0x2A2800)}, + .int_stat_2 = {.phys = CRONUS_ADDR(0x2A2804)}, + .int_stat_1 = {.phys = CRONUS_ADDR(0x2A2808)}, + .int_stat_0 = {.phys = CRONUS_ADDR(0x2A280C)}, + .int_config = {.phys = CRONUS_ADDR(0x2A2810)}, + .int_int_scan = {.phys = CRONUS_ADDR(0x2A2818)}, + .ien_int_3 = {.phys = CRONUS_ADDR(0x2A2830)}, + .ien_int_2 = {.phys = CRONUS_ADDR(0x2A2834)}, + .ien_int_1 = {.phys = CRONUS_ADDR(0x2A2838)}, + .ien_int_0 = {.phys = CRONUS_ADDR(0x2A283C)}, + .int_level_3_3 = {.phys = CRONUS_ADDR(0x2A2880)}, + .int_level_3_2 = {.phys = CRONUS_ADDR(0x2A2884)}, + .int_level_3_1 = {.phys = CRONUS_ADDR(0x2A2888)}, + .int_level_3_0 = {.phys = CRONUS_ADDR(0x2A288C)}, + .int_level_2_3 = {.phys = CRONUS_ADDR(0x2A2890)}, + .int_level_2_2 = {.phys = CRONUS_ADDR(0x2A2894)}, + .int_level_2_1 = {.phys = CRONUS_ADDR(0x2A2898)}, + .int_level_2_0 = {.phys = CRONUS_ADDR(0x2A289C)}, + .int_level_1_3 = {.phys = CRONUS_ADDR(0x2A28A0)}, + .int_level_1_2 = {.phys = CRONUS_ADDR(0x2A28A4)}, + .int_level_1_1 = {.phys = CRONUS_ADDR(0x2A28A8)}, + .int_level_1_0 = {.phys = CRONUS_ADDR(0x2A28AC)}, + .int_level_0_3 = {.phys = CRONUS_ADDR(0x2A28B0)}, + .int_level_0_2 = {.phys = CRONUS_ADDR(0x2A28B4)}, + .int_level_0_1 = {.phys = CRONUS_ADDR(0x2A28B8)}, + .int_level_0_0 = {.phys = CRONUS_ADDR(0x2A28BC)}, + .int_docsis_en = {.phys = CRONUS_ADDR(0x2A28F4)}, - .mips_pll_setup = 0x1C0000, - .usb_fs = 0x1C0018, - .test_bus = 0x1C00CC, - .crt_spare = 0x1c00d4, - .usb2_ohci_int_mask = 0x20000C, - .usb2_strap = 0x200014, - .ehci_hcapbase = 0x21FE00, - .ohci_hc_revision = 0x1E0000, - .bcm1_bs_lmi_steer = 0x2E0008, - .usb2_control = 0x2E004C, - .usb2_stbus_obc = 0x21FF00, - .usb2_stbus_mess_size = 0x21FF04, - .usb2_stbus_chunk_size = 0x21FF08, + .mips_pll_setup = {.phys = CRONUS_ADDR(0x1C0000)}, + .usb_fs = {.phys = CRONUS_ADDR(0x1C0018)}, + .test_bus = {.phys = CRONUS_ADDR(0x1C00CC)}, + .crt_spare = {.phys = CRONUS_ADDR(0x1c00d4)}, + .usb2_ohci_int_mask = {.phys = CRONUS_ADDR(0x20000C)}, + .usb2_strap = {.phys = CRONUS_ADDR(0x200014)}, + .ehci_hcapbase = {.phys = CRONUS_ADDR(0x21FE00)}, + .ohci_hc_revision = {.phys = CRONUS_ADDR(0x1E0000)}, + .bcm1_bs_lmi_steer = {.phys = CRONUS_ADDR(0x2E0008)}, + .usb2_control = {.phys = CRONUS_ADDR(0x2E004C)}, + .usb2_stbus_obc = {.phys = CRONUS_ADDR(0x21FF00)}, + .usb2_stbus_mess_size = {.phys = CRONUS_ADDR(0x21FF04)}, + .usb2_stbus_chunk_size = {.phys = CRONUS_ADDR(0x21FF08)}, - .pcie_regs = 0x220000, - .tim_ch = 0x2A2C10, - .tim_cl = 0x2A2C14, - .gpio_dout = 0x2A2C20, - .gpio_din = 0x2A2C24, - .gpio_dir = 0x2A2C2C, - .watchdog = 0x2A2C30, - .front_panel = 0x2A3800, + .pcie_regs = {.phys = CRONUS_ADDR(0x220000)}, + .tim_ch = {.phys = CRONUS_ADDR(0x2A2C10)}, + .tim_cl = {.phys = CRONUS_ADDR(0x2A2C14)}, + .gpio_dout = {.phys = CRONUS_ADDR(0x2A2C20)}, + .gpio_din = {.phys = CRONUS_ADDR(0x2A2C24)}, + .gpio_dir = {.phys = CRONUS_ADDR(0x2A2C2C)}, + .watchdog = {.phys = CRONUS_ADDR(0x2A2C30)}, + .front_panel = {.phys = CRONUS_ADDR(0x2A3800)}, }; diff --git a/arch/mips/powertv/asic/asic-zeus.c b/arch/mips/powertv/asic/asic-zeus.c index 1469daa..095cbe10 100644 --- a/arch/mips/powertv/asic/asic-zeus.c +++ b/arch/mips/powertv/asic/asic-zeus.c @@ -23,76 +23,79 @@ * Description: Defines the platform resources for the SA settop. */ +#include <linux/init.h> #include <asm/mach-powertv/asic.h> -const struct register_map zeus_register_map = { - .eic_slow0_strt_add = 0x000000, - .eic_cfg_bits = 0x000038, - .eic_ready_status = 0x00004c, +#define ZEUS_ADDR(x) (ZEUS_IO_BASE + (x)) - .chipver3 = 0x280800, - .chipver2 = 0x280804, - .chipver1 = 0x280808, - .chipver0 = 0x28080c, +const struct register_map zeus_register_map __initdata = { + .eic_slow0_strt_add = {.phys = ZEUS_ADDR(0x000000)}, + .eic_cfg_bits = {.phys = ZEUS_ADDR(0x000038)}, + .eic_ready_status = {.phys = ZEUS_ADDR(0x00004c)}, + + .chipver3 = {.phys = ZEUS_ADDR(0x280800)}, + .chipver2 = {.phys = ZEUS_ADDR(0x280804)}, + .chipver1 = {.phys = ZEUS_ADDR(0x280808)}, + .chipver0 = {.phys = ZEUS_ADDR(0x28080c)}, /* The registers of IRBlaster */ - .uart1_intstat = 0x281800, - .uart1_inten = 0x281804, - .uart1_config1 = 0x281808, - .uart1_config2 = 0x28180C, - .uart1_divisorhi = 0x281810, - .uart1_divisorlo = 0x281814, - .uart1_data = 0x281818, - .uart1_status = 0x28181C, + .uart1_intstat = {.phys = ZEUS_ADDR(0x281800)}, + .uart1_inten = {.phys = ZEUS_ADDR(0x281804)}, + .uart1_config1 = {.phys = ZEUS_ADDR(0x281808)}, + .uart1_config2 = {.phys = ZEUS_ADDR(0x28180C)}, + .uart1_divisorhi = {.phys = ZEUS_ADDR(0x281810)}, + .uart1_divisorlo = {.phys = ZEUS_ADDR(0x281814)}, + .uart1_data = {.phys = ZEUS_ADDR(0x281818)}, + .uart1_status = {.phys = ZEUS_ADDR(0x28181C)}, - .int_stat_3 = 0x282800, - .int_stat_2 = 0x282804, - .int_stat_1 = 0x282808, - .int_stat_0 = 0x28280c, - .int_config = 0x282810, - .int_int_scan = 0x282818, - .ien_int_3 = 0x282830, - .ien_int_2 = 0x282834, - .ien_int_1 = 0x282838, - .ien_int_0 = 0x28283c, - .int_level_3_3 = 0x282880, - .int_level_3_2 = 0x282884, - .int_level_3_1 = 0x282888, - .int_level_3_0 = 0x28288c, - .int_level_2_3 = 0x282890, - .int_level_2_2 = 0x282894, - .int_level_2_1 = 0x282898, - .int_level_2_0 = 0x28289c, - .int_level_1_3 = 0x2828a0, - .int_level_1_2 = 0x2828a4, - .int_level_1_1 = 0x2828a8, - .int_level_1_0 = 0x2828ac, - .int_level_0_3 = 0x2828b0, - .int_level_0_2 = 0x2828b4, - .int_level_0_1 = 0x2828b8, - .int_level_0_0 = 0x2828bc, - .int_docsis_en = 0x2828F4, + .int_stat_3 = {.phys = ZEUS_ADDR(0x282800)}, + .int_stat_2 = {.phys = ZEUS_ADDR(0x282804)}, + .int_stat_1 = {.phys = ZEUS_ADDR(0x282808)}, + .int_stat_0 = {.phys = ZEUS_ADDR(0x28280c)}, + .int_config = {.phys = ZEUS_ADDR(0x282810)}, + .int_int_scan = {.phys = ZEUS_ADDR(0x282818)}, + .ien_int_3 = {.phys = ZEUS_ADDR(0x282830)}, + .ien_int_2 = {.phys = ZEUS_ADDR(0x282834)}, + .ien_int_1 = {.phys = ZEUS_ADDR(0x282838)}, + .ien_int_0 = {.phys = ZEUS_ADDR(0x28283c)}, + .int_level_3_3 = {.phys = ZEUS_ADDR(0x282880)}, + .int_level_3_2 = {.phys = ZEUS_ADDR(0x282884)}, + .int_level_3_1 = {.phys = ZEUS_ADDR(0x282888)}, + .int_level_3_0 = {.phys = ZEUS_ADDR(0x28288c)}, + .int_level_2_3 = {.phys = ZEUS_ADDR(0x282890)}, + .int_level_2_2 = {.phys = ZEUS_ADDR(0x282894)}, + .int_level_2_1 = {.phys = ZEUS_ADDR(0x282898)}, + .int_level_2_0 = {.phys = ZEUS_ADDR(0x28289c)}, + .int_level_1_3 = {.phys = ZEUS_ADDR(0x2828a0)}, + .int_level_1_2 = {.phys = ZEUS_ADDR(0x2828a4)}, + .int_level_1_1 = {.phys = ZEUS_ADDR(0x2828a8)}, + .int_level_1_0 = {.phys = ZEUS_ADDR(0x2828ac)}, + .int_level_0_3 = {.phys = ZEUS_ADDR(0x2828b0)}, + .int_level_0_2 = {.phys = ZEUS_ADDR(0x2828b4)}, + .int_level_0_1 = {.phys = ZEUS_ADDR(0x2828b8)}, + .int_level_0_0 = {.phys = ZEUS_ADDR(0x2828bc)}, + .int_docsis_en = {.phys = ZEUS_ADDR(0x2828F4)}, - .mips_pll_setup = 0x1a0000, - .usb_fs = 0x1a0018, - .test_bus = 0x1a0238, - .crt_spare = 0x1a0090, - .usb2_ohci_int_mask = 0x1e000c, - .usb2_strap = 0x1e0014, - .ehci_hcapbase = 0x1FFE00, - .ohci_hc_revision = 0x1FFC00, - .bcm1_bs_lmi_steer = 0x2C0008, - .usb2_control = 0x2c01a0, - .usb2_stbus_obc = 0x1FFF00, - .usb2_stbus_mess_size = 0x1FFF04, - .usb2_stbus_chunk_size = 0x1FFF08, + .mips_pll_setup = {.phys = ZEUS_ADDR(0x1a0000)}, + .usb_fs = {.phys = ZEUS_ADDR(0x1a0018)}, + .test_bus = {.phys = ZEUS_ADDR(0x1a0238)}, + .crt_spare = {.phys = ZEUS_ADDR(0x1a0090)}, + .usb2_ohci_int_mask = {.phys = ZEUS_ADDR(0x1e000c)}, + .usb2_strap = {.phys = ZEUS_ADDR(0x1e0014)}, + .ehci_hcapbase = {.phys = ZEUS_ADDR(0x1FFE00)}, + .ohci_hc_revision = {.phys = ZEUS_ADDR(0x1FFC00)}, + .bcm1_bs_lmi_steer = {.phys = ZEUS_ADDR(0x2C0008)}, + .usb2_control = {.phys = ZEUS_ADDR(0x2c01a0)}, + .usb2_stbus_obc = {.phys = ZEUS_ADDR(0x1FFF00)}, + .usb2_stbus_mess_size = {.phys = ZEUS_ADDR(0x1FFF04)}, + .usb2_stbus_chunk_size = {.phys = ZEUS_ADDR(0x1FFF08)}, - .pcie_regs = 0x200000, - .tim_ch = 0x282C10, - .tim_cl = 0x282C14, - .gpio_dout = 0x282c20, - .gpio_din = 0x282c24, - .gpio_dir = 0x282c2C, - .watchdog = 0x282c30, - .front_panel = 0x283800, + .pcie_regs = {.phys = ZEUS_ADDR(0x200000)}, + .tim_ch = {.phys = ZEUS_ADDR(0x282C10)}, + .tim_cl = {.phys = ZEUS_ADDR(0x282C14)}, + .gpio_dout = {.phys = ZEUS_ADDR(0x282c20)}, + .gpio_din = {.phys = ZEUS_ADDR(0x282c24)}, + .gpio_dir = {.phys = ZEUS_ADDR(0x282c2C)}, + .watchdog = {.phys = ZEUS_ADDR(0x282c30)}, + .front_panel = {.phys = ZEUS_ADDR(0x283800)}, }; diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c index bae8288..6a88219 100644 --- a/arch/mips/powertv/asic/asic_devices.c +++ b/arch/mips/powertv/asic/asic_devices.c @@ -67,8 +67,8 @@ enum asic_type asic; unsigned int platform_features; unsigned int platform_family; -const struct register_map *register_map; -EXPORT_SYMBOL(register_map); /* Exported for testing */ +struct register_map _asic_register_map; +EXPORT_SYMBOL(_asic_register_map); /* Exported for testing */ unsigned long asic_phy_base; unsigned long asic_base; EXPORT_SYMBOL(asic_base); /* Exported for testing */ @@ -418,6 +418,15 @@ void platform_unconfigure_usb_ohci() { } +static void __init set_register_map(unsigned long phys_base, + const struct register_map *map) +{ + asic_phy_base = phys_base; + _asic_register_map = *map; + register_map_virtualize(&_asic_register_map); + asic_base = (unsigned long)ioremap_nocache(phys_base, ASIC_IO_SIZE); +} + /** * configure_platform - configuration based on platform type. */ @@ -431,10 +440,7 @@ void __init configure_platform(void) case FAMILY_1500VZF: platform_features = FFS_CAPABLE; asic = ASIC_CALLIOPE; - asic_phy_base = CALLIOPE_IO_BASE; - register_map = &calliope_register_map; - asic_base = (unsigned long)ioremap_nocache(asic_phy_base, - ASIC_IO_SIZE); + set_register_map(CALLIOPE_IO_BASE, &calliope_register_map); if (platform_family == FAMILY_1500VZE) { gp_resources = non_dvr_vze_calliope_resources; @@ -455,10 +461,7 @@ void __init configure_platform(void) platform_features = FFS_CAPABLE | PCIE_CAPABLE | DISPLAY_CAPABLE; asic = ASIC_ZEUS; - asic_phy_base = ZEUS_IO_BASE; - register_map = &zeus_register_map; - asic_base = (unsigned long)ioremap_nocache(asic_phy_base, - ASIC_IO_SIZE); + set_register_map(ZEUS_IO_BASE, &zeus_register_map); gp_resources = non_dvr_zeus_resources; pr_info("Platform: 4500 - ZEUS, NON_DVR_CAPABLE\n"); @@ -471,11 +474,6 @@ void __init configure_platform(void) /* The settop has PCIE but it isn't used, so don't advertise * it*/ platform_features = FFS_CAPABLE | DISPLAY_CAPABLE; - asic_phy_base = CRONUS_IO_BASE; /* same as Cronus */ - register_map = &cronus_register_map; /* same as Cronus */ - asic_base = (unsigned long)ioremap_nocache(asic_phy_base, - ASIC_IO_SIZE); - gp_resources = non_dvr_cronuslite_resources; /* ASIC version will determine if this is a real CronusLite or * Castrati(Cronus) */ @@ -489,6 +487,9 @@ void __init configure_platform(void) else asic = ASIC_CRONUSLITE; + /* Cronus and Cronus Lite have the same register map */ + set_register_map(CRONUS_IO_BASE, &cronus_register_map); + gp_resources = non_dvr_cronuslite_resources; pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, " "chipversion=0x%08X\n", (asic == ASIC_CRONUS) ? "CRONUS" : "CRONUS LITE", @@ -498,10 +499,7 @@ void __init configure_platform(void) case FAMILY_4600VZA: platform_features = FFS_CAPABLE | DISPLAY_CAPABLE; asic = ASIC_CRONUS; - asic_phy_base = CRONUS_IO_BASE; - register_map = &cronus_register_map; - asic_base = (unsigned long)ioremap_nocache(asic_phy_base, - ASIC_IO_SIZE); + set_register_map(CRONUS_IO_BASE, &cronus_register_map); gp_resources = non_dvr_cronus_resources; pr_info("Platform: Vz Class A - CRONUS, NON_DVR_CAPABLE\n"); @@ -512,10 +510,7 @@ void __init configure_platform(void) platform_features = DVR_CAPABLE | PCIE_CAPABLE | DISPLAY_CAPABLE; asic = ASIC_ZEUS; - asic_phy_base = ZEUS_IO_BASE; - register_map = &zeus_register_map; - asic_base = (unsigned long)ioremap_nocache(asic_phy_base, - ASIC_IO_SIZE); + set_register_map(ZEUS_IO_BASE, &zeus_register_map); gp_resources = dvr_zeus_resources; pr_info("Platform: 8500/RNG200 - ZEUS, DVR_CAPABLE\n"); @@ -526,10 +521,7 @@ void __init configure_platform(void) platform_features = DVR_CAPABLE | PCIE_CAPABLE | DISPLAY_CAPABLE; asic = ASIC_CRONUS; - asic_phy_base = CRONUS_IO_BASE; - register_map = &cronus_register_map; - asic_base = (unsigned long)ioremap_nocache(asic_phy_base, - ASIC_IO_SIZE); + set_register_map(CRONUS_IO_BASE, &cronus_register_map); gp_resources = dvr_cronus_resources; pr_info("Platform: 8600/Vz Class B - CRONUS, " diff --git a/arch/s390/include/asm/irqflags.h b/arch/s390/include/asm/irqflags.h index 3f26131..c2fb432 100644 --- a/arch/s390/include/asm/irqflags.h +++ b/arch/s390/include/asm/irqflags.h @@ -1,14 +1,12 @@ /* - * include/asm-s390/irqflags.h - * - * Copyright (C) IBM Corp. 2006 - * Author(s): Heiko Carstens <heiko.carstens@de.ibm.com> + * Copyright IBM Corp. 2006,2010 + * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com> */ #ifndef __ASM_IRQFLAGS_H #define __ASM_IRQFLAGS_H -#ifdef __KERNEL__ +#include <linux/types.h> #if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) @@ -102,5 +100,4 @@ static inline int raw_irqs_disabled_flags(unsigned long flags) /* For spinlocks etc */ #define raw_local_irq_save(x) ((x) = raw_local_irq_disable()) -#endif /* __KERNEL__ */ #endif /* __ASM_IRQFLAGS_H */ diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 48215d1..e8ef21c 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -571,6 +571,7 @@ pgm_svcper: mvc __THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID oi __TI_flags+3(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP TRACE_IRQS_ON + lm %r2,%r6,SP_R2(%r15) # load svc arguments stosm __SF_EMPTY(%r15),0x03 # reenable interrupts b BASED(sysc_do_svc) diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 9aff1d4..f33658f 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -549,6 +549,7 @@ pgm_svcper: mvc __THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID oi __TI_flags+7(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP TRACE_IRQS_ON + lmg %r2,%r6,SP_R2(%r15) # load svc arguments stosm __SF_EMPTY(%r15),0x03 # reenable interrupts j sysc_do_svc diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index 1675c48..6289945 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -64,7 +64,7 @@ SYSCALL_DEFINE3(sigsuspend, int, history0, int, history1, old_sigset_t, mask) recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - current->state = TASK_INTERRUPTIBLE; + set_current_state(TASK_INTERRUPTIBLE); schedule(); set_thread_flag(TIF_RESTORE_SIGMASK); diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c index 31f80c6..ec79faf 100644 --- a/arch/sh/kernel/process_64.c +++ b/arch/sh/kernel/process_64.c @@ -368,7 +368,7 @@ void exit_thread(void) void flush_thread(void) { - /* Called by fs/exec.c (flush_old_exec) to remove traces of a + /* Called by fs/exec.c (setup_new_exec) to remove traces of a * previously running executable. */ #ifdef CONFIG_SH_FPU if (last_task_used_math == current) { diff --git a/arch/sparc/include/asm/elf_64.h b/arch/sparc/include/asm/elf_64.h index ff66bb8..e678803 100644 --- a/arch/sparc/include/asm/elf_64.h +++ b/arch/sparc/include/asm/elf_64.h @@ -195,17 +195,10 @@ static inline unsigned int sparc64_elf_hwcap(void) #define ELF_PLATFORM (NULL) #define SET_PERSONALITY(ex) \ -do { unsigned long new_flags = current_thread_info()->flags; \ - new_flags &= _TIF_32BIT; \ - if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ - new_flags |= _TIF_32BIT; \ +do { if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ + set_thread_flag(TIF_32BIT); \ else \ - new_flags &= ~_TIF_32BIT; \ - if ((current_thread_info()->flags & _TIF_32BIT) \ - != new_flags) \ - set_thread_flag(TIF_ABI_PENDING); \ - else \ - clear_thread_flag(TIF_ABI_PENDING); \ + clear_thread_flag(TIF_32BIT); \ /* flush_thread will update pgd cache */ \ if (personality(current->personality) != PER_LINUX32) \ set_personality(PER_LINUX | \ diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h index 7257ebb..39be9f2 100644 --- a/arch/sparc/include/asm/thread_info_64.h +++ b/arch/sparc/include/asm/thread_info_64.h @@ -228,12 +228,11 @@ register struct thread_info *current_thread_info_reg asm("g6"); #define TIF_SECCOMP 9 /* secure computing */ #define TIF_SYSCALL_AUDIT 10 /* syscall auditing active */ #define TIF_SYSCALL_TRACEPOINT 11 /* syscall tracepoint instrumentation */ -/* flag bit 11 is available */ /* NOTE: Thread flags >= 12 should be ones we have no interest * in using in assembly, else we can't use the mask as * an immediate value in instructions such as andcc. */ -#define TIF_ABI_PENDING 12 +/* flag bit 12 is available */ #define TIF_MEMDIE 13 #define TIF_POLLING_NRFLAG 14 #define TIF_FREEZE 15 /* is freezing for suspend */ @@ -248,7 +247,6 @@ register struct thread_info *current_thread_info_reg asm("g6"); #define _TIF_SECCOMP (1<<TIF_SECCOMP) #define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT) #define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT) -#define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING) #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) #define _TIF_FREEZE (1<<TIF_FREEZE) diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c index f2179cc..e1cbdb9 100644 --- a/arch/sparc/kernel/irq_64.c +++ b/arch/sparc/kernel/irq_64.c @@ -268,10 +268,8 @@ static int irq_choose_cpu(unsigned int virt_irq, const struct cpumask *affinity) return cpuid; } #else -static int irq_choose_cpu(unsigned int virt_irq, const struct cpumask *affinity) -{ - return real_hard_smp_processor_id(); -} +#define irq_choose_cpu(virt_irq, affinity) \ + real_hard_smp_processor_id() #endif static void sun4u_irq_enable(unsigned int virt_irq) diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c index 18d6785..c3f1cce 100644 --- a/arch/sparc/kernel/process_64.c +++ b/arch/sparc/kernel/process_64.c @@ -365,14 +365,6 @@ void flush_thread(void) struct thread_info *t = current_thread_info(); struct mm_struct *mm; - if (test_ti_thread_flag(t, TIF_ABI_PENDING)) { - clear_ti_thread_flag(t, TIF_ABI_PENDING); - if (test_ti_thread_flag(t, TIF_32BIT)) - clear_ti_thread_flag(t, TIF_32BIT); - else - set_ti_thread_flag(t, TIF_32BIT); - } - mm = t->task->mm; if (mm) tsb_context_switch(mm); diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index cbcbfde..eb40925 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -989,12 +989,6 @@ config X86_CPUID with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to /dev/cpu/31/cpuid. -config X86_CPU_DEBUG - tristate "/sys/kernel/debug/x86/cpu/* - CPU Debug support" - ---help--- - If you select this option, this will provide various x86 CPUs - information through debugfs. - choice prompt "High Memory Support" default HIGHMEM4G if !X86_NUMAQ diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c index 2a4d073..f9f4724 100644 --- a/arch/x86/ia32/ia32_aout.c +++ b/arch/x86/ia32/ia32_aout.c @@ -308,14 +308,15 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs) if (retval) return retval; - regs->cs = __USER32_CS; - regs->r8 = regs->r9 = regs->r10 = regs->r11 = regs->r12 = - regs->r13 = regs->r14 = regs->r15 = 0; - /* OK, This is the point of no return */ set_personality(PER_LINUX); set_thread_flag(TIF_IA32); - clear_thread_flag(TIF_ABI_PENDING); + + setup_new_exec(bprm); + + regs->cs = __USER32_CS; + regs->r8 = regs->r9 = regs->r10 = regs->r11 = regs->r12 = + regs->r13 = regs->r14 = regs->r15 = 0; current->mm->end_code = ex.a_text + (current->mm->start_code = N_TXTADDR(ex)); diff --git a/arch/x86/include/asm/cpu_debug.h b/arch/x86/include/asm/cpu_debug.h deleted file mode 100644 index d96c1ee..0000000 --- a/arch/x86/include/asm/cpu_debug.h +++ /dev/null @@ -1,127 +0,0 @@ -#ifndef _ASM_X86_CPU_DEBUG_H -#define _ASM_X86_CPU_DEBUG_H - -/* - * CPU x86 architecture debug - * - * Copyright(C) 2009 Jaswinder Singh Rajput - */ - -/* Register flags */ -enum cpu_debug_bit { -/* Model Specific Registers (MSRs) */ - CPU_MC_BIT, /* Machine Check */ - CPU_MONITOR_BIT, /* Monitor */ - CPU_TIME_BIT, /* Time */ - CPU_PMC_BIT, /* Performance Monitor */ - CPU_PLATFORM_BIT, /* Platform */ - CPU_APIC_BIT, /* APIC */ - CPU_POWERON_BIT, /* Power-on */ - CPU_CONTROL_BIT, /* Control */ - CPU_FEATURES_BIT, /* Features control */ - CPU_LBRANCH_BIT, /* Last Branch */ - CPU_BIOS_BIT, /* BIOS */ - CPU_FREQ_BIT, /* Frequency */ - CPU_MTTR_BIT, /* MTRR */ - CPU_PERF_BIT, /* Performance */ - CPU_CACHE_BIT, /* Cache */ - CPU_SYSENTER_BIT, /* Sysenter */ - CPU_THERM_BIT, /* Thermal */ - CPU_MISC_BIT, /* Miscellaneous */ - CPU_DEBUG_BIT, /* Debug */ - CPU_PAT_BIT, /* PAT */ - CPU_VMX_BIT, /* VMX */ - CPU_CALL_BIT, /* System Call */ - CPU_BASE_BIT, /* BASE Address */ - CPU_VER_BIT, /* Version ID */ - CPU_CONF_BIT, /* Configuration */ - CPU_SMM_BIT, /* System mgmt mode */ - CPU_SVM_BIT, /*Secure Virtual Machine*/ - CPU_OSVM_BIT, /* OS-Visible Workaround*/ -/* Standard Registers */ - CPU_TSS_BIT, /* Task Stack Segment */ - CPU_CR_BIT, /* Control Registers */ - CPU_DT_BIT, /* Descriptor Table */ -/* End of Registers flags */ - CPU_REG_ALL_BIT, /* Select all Registers */ -}; - -#define CPU_REG_ALL (~0) /* Select all Registers */ - -#define CPU_MC (1 << CPU_MC_BIT) -#define CPU_MONITOR (1 << CPU_MONITOR_BIT) -#define CPU_TIME (1 << CPU_TIME_BIT) -#define CPU_PMC (1 << CPU_PMC_BIT) -#define CPU_PLATFORM (1 << CPU_PLATFORM_BIT) -#define CPU_APIC (1 << CPU_APIC_BIT) -#define CPU_POWERON (1 << CPU_POWERON_BIT) -#define CPU_CONTROL (1 << CPU_CONTROL_BIT) -#define CPU_FEATURES (1 << CPU_FEATURES_BIT) -#define CPU_LBRANCH (1 << CPU_LBRANCH_BIT) -#define CPU_BIOS (1 << CPU_BIOS_BIT) -#define CPU_FREQ (1 << CPU_FREQ_BIT) -#define CPU_MTRR (1 << CPU_MTTR_BIT) -#define CPU_PERF (1 << CPU_PERF_BIT) -#define CPU_CACHE (1 << CPU_CACHE_BIT) -#define CPU_SYSENTER (1 << CPU_SYSENTER_BIT) -#define CPU_THERM (1 << CPU_THERM_BIT) -#define CPU_MISC (1 << CPU_MISC_BIT) -#define CPU_DEBUG (1 << CPU_DEBUG_BIT) -#define CPU_PAT (1 << CPU_PAT_BIT) -#define CPU_VMX (1 << CPU_VMX_BIT) -#define CPU_CALL (1 << CPU_CALL_BIT) -#define CPU_BASE (1 << CPU_BASE_BIT) -#define CPU_VER (1 << CPU_VER_BIT) -#define CPU_CONF (1 << CPU_CONF_BIT) -#define CPU_SMM (1 << CPU_SMM_BIT) -#define CPU_SVM (1 << CPU_SVM_BIT) -#define CPU_OSVM (1 << CPU_OSVM_BIT) -#define CPU_TSS (1 << CPU_TSS_BIT) -#define CPU_CR (1 << CPU_CR_BIT) -#define CPU_DT (1 << CPU_DT_BIT) - -/* Register file flags */ -enum cpu_file_bit { - CPU_INDEX_BIT, /* index */ - CPU_VALUE_BIT, /* value */ -}; - -#define CPU_FILE_VALUE (1 << CPU_VALUE_BIT) - -#define MAX_CPU_FILES 512 - -struct cpu_private { - unsigned cpu; - unsigned type; - unsigned reg; - unsigned file; -}; - -struct cpu_debug_base { - char *name; /* Register name */ - unsigned flag; /* Register flag */ - unsigned write; /* Register write flag */ -}; - -/* - * Currently it looks similar to cpu_debug_base but once we add more files - * cpu_file_base will go in different direction - */ -struct cpu_file_base { - char *name; /* Register file name */ - unsigned flag; /* Register file flag */ - unsigned write; /* Register write flag */ -}; - -struct cpu_cpuX_base { - struct dentry *dentry; /* Register dentry */ - int init; /* Register index file */ -}; - -struct cpu_debug_range { - unsigned min; /* Register range min */ - unsigned max; /* Register range max */ - unsigned flag; /* Supported flags */ -}; - -#endif /* _ASM_X86_CPU_DEBUG_H */ diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h index b4501ee..1994d3f 100644 --- a/arch/x86/include/asm/elf.h +++ b/arch/x86/include/asm/elf.h @@ -181,14 +181,8 @@ do { \ void start_thread_ia32(struct pt_regs *regs, u32 new_ip, u32 new_sp); #define compat_start_thread start_thread_ia32 -#define COMPAT_SET_PERSONALITY(ex) \ -do { \ - if (test_thread_flag(TIF_IA32)) \ - clear_thread_flag(TIF_ABI_PENDING); \ - else \ - set_thread_flag(TIF_ABI_PENDING); \ - current->personality |= force_personality32; \ -} while (0) +void set_personality_ia32(void); +#define COMPAT_SET_PERSONALITY(ex) set_personality_ia32() #define COMPAT_ELF_PLATFORM ("i686") diff --git a/arch/x86/include/asm/hpet.h b/arch/x86/include/asm/hpet.h index 5d89fd2..1d5c08a 100644 --- a/arch/x86/include/asm/hpet.h +++ b/arch/x86/include/asm/hpet.h @@ -67,6 +67,7 @@ extern unsigned long hpet_address; extern unsigned long force_hpet_address; extern u8 hpet_blockid; extern int hpet_force_user; +extern u8 hpet_msi_disable; extern int is_hpet_enabled(void); extern int hpet_enable(void); extern void hpet_disable(void); diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h index c24ca9a..ef51b50 100644 --- a/arch/x86/include/asm/microcode.h +++ b/arch/x86/include/asm/microcode.h @@ -12,8 +12,6 @@ struct device; enum ucode_state { UCODE_ERROR, UCODE_OK, UCODE_NFOUND }; struct microcode_ops { - void (*init)(struct device *device); - void (*fini)(void); enum ucode_state (*request_microcode_user) (int cpu, const void __user *buf, size_t size); diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h index 375c917..e0d2890 100644 --- a/arch/x86/include/asm/thread_info.h +++ b/arch/x86/include/asm/thread_info.h @@ -87,7 +87,6 @@ struct thread_info { #define TIF_NOTSC 16 /* TSC is not accessible in userland */ #define TIF_IA32 17 /* 32bit process */ #define TIF_FORK 18 /* ret_from_fork */ -#define TIF_ABI_PENDING 19 #define TIF_MEMDIE 20 #define TIF_DEBUG 21 /* uses debug registers */ #define TIF_IO_BITMAP 22 /* uses I/O bitmap */ @@ -112,7 +111,6 @@ struct thread_info { #define _TIF_NOTSC (1 << TIF_NOTSC) #define _TIF_IA32 (1 << TIF_IA32) #define _TIF_FORK (1 << TIF_FORK) -#define _TIF_ABI_PENDING (1 << TIF_ABI_PENDING) #define _TIF_DEBUG (1 << TIF_DEBUG) #define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) #define _TIF_FREEZE (1 << TIF_FREEZE) diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index 1d2cb38..c202b62 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -19,8 +19,6 @@ obj-y += vmware.o hypervisor.o sched.o obj-$(CONFIG_X86_32) += bugs.o cmpxchg.o obj-$(CONFIG_X86_64) += bugs_64.o -obj-$(CONFIG_X86_CPU_DEBUG) += cpu_debug.o - obj-$(CONFIG_CPU_SUP_INTEL) += intel.o obj-$(CONFIG_CPU_SUP_AMD) += amd.o obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix.o diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c deleted file mode 100644 index b368cd8..0000000 --- a/arch/x86/kernel/cpu/cpu_debug.c +++ /dev/null @@ -1,688 +0,0 @@ -/* - * CPU x86 architecture debug code - * - * Copyright(C) 2009 Jaswinder Singh Rajput - * - * For licencing details see kernel-base/COPYING - */ - -#include <linux/interrupt.h> -#include <linux/compiler.h> -#include <linux/seq_file.h> -#include <linux/debugfs.h> -#include <linux/kprobes.h> -#include <linux/uaccess.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/percpu.h> -#include <linux/signal.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/smp.h> - -#include <asm/cpu_debug.h> -#include <asm/paravirt.h> -#include <asm/system.h> -#include <asm/traps.h> -#include <asm/apic.h> -#include <asm/desc.h> - -static DEFINE_PER_CPU(struct cpu_cpuX_base [CPU_REG_ALL_BIT], cpud_arr); -static DEFINE_PER_CPU(struct cpu_private * [MAX_CPU_FILES], cpud_priv_arr); -static DEFINE_PER_CPU(int, cpud_priv_count); - -static DEFINE_MUTEX(cpu_debug_lock); - -static struct dentry *cpu_debugfs_dir; - -static struct cpu_debug_base cpu_base[] = { - { "mc", CPU_MC, 0 }, - { "monitor", CPU_MONITOR, 0 }, - { "time", CPU_TIME, 0 }, - { "pmc", CPU_PMC, 1 }, - { "platform", CPU_PLATFORM, 0 }, - { "apic", CPU_APIC, 0 }, - { "poweron", CPU_POWERON, 0 }, - { "control", CPU_CONTROL, 0 }, - { "features", CPU_FEATURES, 0 }, - { "lastbranch", CPU_LBRANCH, 0 }, - { "bios", CPU_BIOS, 0 }, - { "freq", CPU_FREQ, 0 }, - { "mtrr", CPU_MTRR, 0 }, - { "perf", CPU_PERF, 0 }, - { "cache", CPU_CACHE, 0 }, - { "sysenter", CPU_SYSENTER, 0 }, - { "therm", CPU_THERM, 0 }, - { "misc", CPU_MISC, 0 }, - { "debug", CPU_DEBUG, 0 }, - { "pat", CPU_PAT, 0 }, - { "vmx", CPU_VMX, 0 }, - { "call", CPU_CALL, 0 }, - { "base", CPU_BASE, 0 }, - { "ver", CPU_VER, 0 }, - { "conf", CPU_CONF, 0 }, - { "smm", CPU_SMM, 0 }, - { "svm", CPU_SVM, 0 }, - { "osvm", CPU_OSVM, 0 }, - { "tss", CPU_TSS, 0 }, - { "cr", CPU_CR, 0 }, - { "dt", CPU_DT, 0 }, - { "registers", CPU_REG_ALL, 0 }, -}; - -static struct cpu_file_base cpu_file[] = { - { "index", CPU_REG_ALL, 0 }, - { "value", CPU_REG_ALL, 1 }, -}; - -/* CPU Registers Range */ -static struct cpu_debug_range cpu_reg_range[] = { - { 0x00000000, 0x00000001, CPU_MC, }, - { 0x00000006, 0x00000007, CPU_MONITOR, }, - { 0x00000010, 0x00000010, CPU_TIME, }, - { 0x00000011, 0x00000013, CPU_PMC, }, - { 0x00000017, 0x00000017, CPU_PLATFORM, }, - { 0x0000001B, 0x0000001B, CPU_APIC, }, - { 0x0000002A, 0x0000002B, CPU_POWERON, }, - { 0x0000002C, 0x0000002C, CPU_FREQ, }, - { 0x0000003A, 0x0000003A, CPU_CONTROL, }, - { 0x00000040, 0x00000047, CPU_LBRANCH, }, - { 0x00000060, 0x00000067, CPU_LBRANCH, }, - { 0x00000079, 0x00000079, CPU_BIOS, }, - { 0x00000088, 0x0000008A, CPU_CACHE, }, - { 0x0000008B, 0x0000008B, CPU_BIOS, }, - { 0x0000009B, 0x0000009B, CPU_MONITOR, }, - { 0x000000C1, 0x000000C4, CPU_PMC, }, - { 0x000000CD, 0x000000CD, CPU_FREQ, }, - { 0x000000E7, 0x000000E8, CPU_PERF, }, - { 0x000000FE, 0x000000FE, CPU_MTRR, }, - - { 0x00000116, 0x0000011E, CPU_CACHE, }, - { 0x00000174, 0x00000176, CPU_SYSENTER, }, - { 0x00000179, 0x0000017B, CPU_MC, }, - { 0x00000186, 0x00000189, CPU_PMC, }, - { 0x00000198, 0x00000199, CPU_PERF, }, - { 0x0000019A, 0x0000019A, CPU_TIME, }, - { 0x0000019B, 0x0000019D, CPU_THERM, }, - { 0x000001A0, 0x000001A0, CPU_MISC, }, - { 0x000001C9, 0x000001C9, CPU_LBRANCH, }, - { 0x000001D7, 0x000001D8, CPU_LBRANCH, }, - { 0x000001D9, 0x000001D9, CPU_DEBUG, }, - { 0x000001DA, 0x000001E0, CPU_LBRANCH, }, - - { 0x00000200, 0x0000020F, CPU_MTRR, }, - { 0x00000250, 0x00000250, CPU_MTRR, }, - { 0x00000258, 0x00000259, CPU_MTRR, }, - { 0x00000268, 0x0000026F, CPU_MTRR, }, - { 0x00000277, 0x00000277, CPU_PAT, }, - { 0x000002FF, 0x000002FF, CPU_MTRR, }, - - { 0x00000300, 0x00000311, CPU_PMC, }, - { 0x00000345, 0x00000345, CPU_PMC, }, - { 0x00000360, 0x00000371, CPU_PMC, }, - { 0x0000038D, 0x00000390, CPU_PMC, }, - { 0x000003A0, 0x000003BE, CPU_PMC, }, - { 0x000003C0, 0x000003CD, CPU_PMC, }, - { 0x000003E0, 0x000003E1, CPU_PMC, }, - { 0x000003F0, 0x000003F2, CPU_PMC, }, - - { 0x00000400, 0x00000417, CPU_MC, }, - { 0x00000480, 0x0000048B, CPU_VMX, }, - - { 0x00000600, 0x00000600, CPU_DEBUG, }, - { 0x00000680, 0x0000068F, CPU_LBRANCH, }, - { 0x000006C0, 0x000006CF, CPU_LBRANCH, }, - - { 0x000107CC, 0x000107D3, CPU_PMC, }, - - { 0xC0000080, 0xC0000080, CPU_FEATURES, }, - { 0xC0000081, 0xC0000084, CPU_CALL, }, - { 0xC0000100, 0xC0000102, CPU_BASE, }, - { 0xC0000103, 0xC0000103, CPU_TIME, }, - - { 0xC0010000, 0xC0010007, CPU_PMC, }, - { 0xC0010010, 0xC0010010, CPU_CONF, }, - { 0xC0010015, 0xC0010015, CPU_CONF, }, - { 0xC0010016, 0xC001001A, CPU_MTRR, }, - { 0xC001001D, 0xC001001D, CPU_MTRR, }, - { 0xC001001F, 0xC001001F, CPU_CONF, }, - { 0xC0010030, 0xC0010035, CPU_BIOS, }, - { 0xC0010044, 0xC0010048, CPU_MC, }, - { 0xC0010050, 0xC0010056, CPU_SMM, }, - { 0xC0010058, 0xC0010058, CPU_CONF, }, - { 0xC0010060, 0xC0010060, CPU_CACHE, }, - { 0xC0010061, 0xC0010068, CPU_SMM, }, - { 0xC0010069, 0xC001006B, CPU_SMM, }, - { 0xC0010070, 0xC0010071, CPU_SMM, }, - { 0xC0010111, 0xC0010113, CPU_SMM, }, - { 0xC0010114, 0xC0010118, CPU_SVM, }, - { 0xC0010140, 0xC0010141, CPU_OSVM, }, - { 0xC0011022, 0xC0011023, CPU_CONF, }, -}; - -static int is_typeflag_valid(unsigned cpu, unsigned flag) -{ - int i; - - /* Standard Registers should be always valid */ - if (flag >= CPU_TSS) - return 1; - - for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) { - if (cpu_reg_range[i].flag == flag) - return 1; - } - - /* Invalid */ - return 0; -} - -static unsigned get_cpu_range(unsigned cpu, unsigned *min, unsigned *max, - int index, unsigned flag) -{ - if (cpu_reg_range[index].flag == flag) { - *min = cpu_reg_range[index].min; - *max = cpu_reg_range[index].max; - } else - *max = 0; - - return *max; -} - -/* This function can also be called with seq = NULL for printk */ -static void print_cpu_data(struct seq_file *seq, unsigned type, - u32 low, u32 high) -{ - struct cpu_private *priv; - u64 val = high; - - if (seq) { - priv = seq->private; - if (priv->file) { - val = (val << 32) | low; - seq_printf(seq, "0x%llx\n", val); - } else - seq_printf(seq, " %08x: %08x_%08x\n", - type, high, low); - } else - printk(KERN_INFO " %08x: %08x_%08x\n", type, high, low); -} - -/* This function can also be called with seq = NULL for printk */ -static void print_msr(struct seq_file *seq, unsigned cpu, unsigned flag) -{ - unsigned msr, msr_min, msr_max; - struct cpu_private *priv; - u32 low, high; - int i; - - if (seq) { - priv = seq->private; - if (priv->file) { - if (!rdmsr_safe_on_cpu(priv->cpu, priv->reg, - &low, &high)) - print_cpu_data(seq, priv->reg, low, high); - return; - } - } - - for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) { - if (!get_cpu_range(cpu, &msr_min, &msr_max, i, flag)) - continue; - - for (msr = msr_min; msr <= msr_max; msr++) { - if (rdmsr_safe_on_cpu(cpu, msr, &low, &high)) - continue; - print_cpu_data(seq, msr, low, high); - } - } -} - -static void print_tss(void *arg) -{ - struct pt_regs *regs = task_pt_regs(current); - struct seq_file *seq = arg; - unsigned int seg; - - seq_printf(seq, " RAX\t: %016lx\n", regs->ax); - seq_printf(seq, " RBX\t: %016lx\n", regs->bx); - seq_printf(seq, " RCX\t: %016lx\n", regs->cx); - seq_printf(seq, " RDX\t: %016lx\n", regs->dx); - - seq_printf(seq, " RSI\t: %016lx\n", regs->si); - seq_printf(seq, " RDI\t: %016lx\n", regs->di); - seq_printf(seq, " RBP\t: %016lx\n", regs->bp); - seq_printf(seq, " ESP\t: %016lx\n", regs->sp); - -#ifdef CONFIG_X86_64 - seq_printf(seq, " R08\t: %016lx\n", regs->r8); - seq_printf(seq, " R09\t: %016lx\n", regs->r9); - seq_printf(seq, " R10\t: %016lx\n", regs->r10); - seq_printf(seq, " R11\t: %016lx\n", regs->r11); - seq_printf(seq, " R12\t: %016lx\n", regs->r12); - seq_printf(seq, " R13\t: %016lx\n", regs->r13); - seq_printf(seq, " R14\t: %016lx\n", regs->r14); - seq_printf(seq, " R15\t: %016lx\n", regs->r15); -#endif - - asm("movl %%cs,%0" : "=r" (seg)); - seq_printf(seq, " CS\t: %04x\n", seg); - asm("movl %%ds,%0" : "=r" (seg)); - seq_printf(seq, " DS\t: %04x\n", seg); - seq_printf(seq, " SS\t: %04lx\n", regs->ss & 0xffff); - asm("movl %%es,%0" : "=r" (seg)); - seq_printf(seq, " ES\t: %04x\n", seg); - asm("movl %%fs,%0" : "=r" (seg)); - seq_printf(seq, " FS\t: %04x\n", seg); - asm("movl %%gs,%0" : "=r" (seg)); - seq_printf(seq, " GS\t: %04x\n", seg); - - seq_printf(seq, " EFLAGS\t: %016lx\n", regs->flags); - - seq_printf(seq, " EIP\t: %016lx\n", regs->ip); -} - -static void print_cr(void *arg) -{ - struct seq_file *seq = arg; - - seq_printf(seq, " cr0\t: %016lx\n", read_cr0()); - seq_printf(seq, " cr2\t: %016lx\n", read_cr2()); - seq_printf(seq, " cr3\t: %016lx\n", read_cr3()); - seq_printf(seq, " cr4\t: %016lx\n", read_cr4_safe()); -#ifdef CONFIG_X86_64 - seq_printf(seq, " cr8\t: %016lx\n", read_cr8()); -#endif -} - -static void print_desc_ptr(char *str, struct seq_file *seq, struct desc_ptr dt) -{ - seq_printf(seq, " %s\t: %016llx\n", str, (u64)(dt.address | dt.size)); -} - -static void print_dt(void *seq) -{ - struct desc_ptr dt; - unsigned long ldt; - - /* IDT */ - store_idt((struct desc_ptr *)&dt); - print_desc_ptr("IDT", seq, dt); - - /* GDT */ - store_gdt((struct desc_ptr *)&dt); - print_desc_ptr("GDT", seq, dt); - - /* LDT */ - store_ldt(ldt); - seq_printf(seq, " LDT\t: %016lx\n", ldt); - - /* TR */ - store_tr(ldt); - seq_printf(seq, " TR\t: %016lx\n", ldt); -} - -static void print_dr(void *arg) -{ - struct seq_file *seq = arg; - unsigned long dr; - int i; - - for (i = 0; i < 8; i++) { - /* Ignore db4, db5 */ - if ((i == 4) || (i == 5)) - continue; - get_debugreg(dr, i); - seq_printf(seq, " dr%d\t: %016lx\n", i, dr); - } - - seq_printf(seq, "\n MSR\t:\n"); -} - -static void print_apic(void *arg) -{ - struct seq_file *seq = arg; - -#ifdef CONFIG_X86_LOCAL_APIC - seq_printf(seq, " LAPIC\t:\n"); - seq_printf(seq, " ID\t\t: %08x\n", apic_read(APIC_ID) >> 24); - seq_printf(seq, " LVR\t\t: %08x\n", apic_read(APIC_LVR)); - seq_printf(seq, " TASKPRI\t: %08x\n", apic_read(APIC_TASKPRI)); - seq_printf(seq, " ARBPRI\t\t: %08x\n", apic_read(APIC_ARBPRI)); - seq_printf(seq, " PROCPRI\t: %08x\n", apic_read(APIC_PROCPRI)); - seq_printf(seq, " LDR\t\t: %08x\n", apic_read(APIC_LDR)); - seq_printf(seq, " DFR\t\t: %08x\n", apic_read(APIC_DFR)); - seq_printf(seq, " SPIV\t\t: %08x\n", apic_read(APIC_SPIV)); - seq_printf(seq, " ISR\t\t: %08x\n", apic_read(APIC_ISR)); - seq_printf(seq, " ESR\t\t: %08x\n", apic_read(APIC_ESR)); - seq_printf(seq, " ICR\t\t: %08x\n", apic_read(APIC_ICR)); - seq_printf(seq, " ICR2\t\t: %08x\n", apic_read(APIC_ICR2)); - seq_printf(seq, " LVTT\t\t: %08x\n", apic_read(APIC_LVTT)); - seq_printf(seq, " LVTTHMR\t: %08x\n", apic_read(APIC_LVTTHMR)); - seq_printf(seq, " LVTPC\t\t: %08x\n", apic_read(APIC_LVTPC)); - seq_printf(seq, " LVT0\t\t: %08x\n", apic_read(APIC_LVT0)); - seq_printf(seq, " LVT1\t\t: %08x\n", apic_read(APIC_LVT1)); - seq_printf(seq, " LVTERR\t\t: %08x\n", apic_read(APIC_LVTERR)); - seq_printf(seq, " TMICT\t\t: %08x\n", apic_read(APIC_TMICT)); - seq_printf(seq, " TMCCT\t\t: %08x\n", apic_read(APIC_TMCCT)); - seq_printf(seq, " TDCR\t\t: %08x\n", apic_read(APIC_TDCR)); - if (boot_cpu_has(X86_FEATURE_EXTAPIC)) { - unsigned int i, v, maxeilvt; - - v = apic_read(APIC_EFEAT); - maxeilvt = (v >> 16) & 0xff; - seq_printf(seq, " EFEAT\t\t: %08x\n", v); - seq_printf(seq, " ECTRL\t\t: %08x\n", apic_read(APIC_ECTRL)); - - for (i = 0; i < maxeilvt; i++) { - v = apic_read(APIC_EILVTn(i)); - seq_printf(seq, " EILVT%d\t\t: %08x\n", i, v); - } - } -#endif /* CONFIG_X86_LOCAL_APIC */ - seq_printf(seq, "\n MSR\t:\n"); -} - -static int cpu_seq_show(struct seq_file *seq, void *v) -{ - struct cpu_private *priv = seq->private; - - if (priv == NULL) - return -EINVAL; - - switch (cpu_base[priv->type].flag) { - case CPU_TSS: - smp_call_function_single(priv->cpu, print_tss, seq, 1); - break; - case CPU_CR: - smp_call_function_single(priv->cpu, print_cr, seq, 1); - break; - case CPU_DT: - smp_call_function_single(priv->cpu, print_dt, seq, 1); - break; - case CPU_DEBUG: - if (priv->file == CPU_INDEX_BIT) - smp_call_function_single(priv->cpu, print_dr, seq, 1); - print_msr(seq, priv->cpu, cpu_base[priv->type].flag); - break; - case CPU_APIC: - if (priv->file == CPU_INDEX_BIT) - smp_call_function_single(priv->cpu, print_apic, seq, 1); - print_msr(seq, priv->cpu, cpu_base[priv->type].flag); - break; - - default: - print_msr(seq, priv->cpu, cpu_base[priv->type].flag); - break; - } - seq_printf(seq, "\n"); - - return 0; -} - -static void *cpu_seq_start(struct seq_file *seq, loff_t *pos) -{ - if (*pos == 0) /* One time is enough ;-) */ - return seq; - - return NULL; -} - -static void *cpu_seq_next(struct seq_file *seq, void *v, loff_t *pos) -{ - (*pos)++; - - return cpu_seq_start(seq, pos); -} - -static void cpu_seq_stop(struct seq_file *seq, void *v) -{ -} - -static const struct seq_operations cpu_seq_ops = { - .start = cpu_seq_start, - .next = cpu_seq_next, - .stop = cpu_seq_stop, - .show = cpu_seq_show, -}; - -static int cpu_seq_open(struct inode *inode, struct file *file) -{ - struct cpu_private *priv = inode->i_private; - struct seq_file *seq; - int err; - - err = seq_open(file, &cpu_seq_ops); - if (!err) { - seq = file->private_data; - seq->private = priv; - } - - return err; -} - -static int write_msr(struct cpu_private *priv, u64 val) -{ - u32 low, high; - - high = (val >> 32) & 0xffffffff; - low = val & 0xffffffff; - - if (!wrmsr_safe_on_cpu(priv->cpu, priv->reg, low, high)) - return 0; - - return -EPERM; -} - -static int write_cpu_register(struct cpu_private *priv, const char *buf) -{ - int ret = -EPERM; - u64 val; - - ret = strict_strtoull(buf, 0, &val); - if (ret < 0) - return ret; - - /* Supporting only MSRs */ - if (priv->type < CPU_TSS_BIT) - return write_msr(priv, val); - - return ret; -} - -static ssize_t cpu_write(struct file *file, const char __user *ubuf, - size_t count, loff_t *off) -{ - struct seq_file *seq = file->private_data; - struct cpu_private *priv = seq->private; - char buf[19]; - - if ((priv == NULL) || (count >= sizeof(buf))) - return -EINVAL; - - if (copy_from_user(&buf, ubuf, count)) - return -EFAULT; - - buf[count] = 0; - - if ((cpu_base[priv->type].write) && (cpu_file[priv->file].write)) - if (!write_cpu_register(priv, buf)) - return count; - - return -EACCES; -} - -static const struct file_operations cpu_fops = { - .owner = THIS_MODULE, - .open = cpu_seq_open, - .read = seq_read, - .write = cpu_write, - .llseek = seq_lseek, - .release = seq_release, -}; - -static int cpu_create_file(unsigned cpu, unsigned type, unsigned reg, - unsigned file, struct dentry *dentry) -{ - struct cpu_private *priv = NULL; - - /* Already intialized */ - if (file == CPU_INDEX_BIT) - if (per_cpu(cpud_arr[type].init, cpu)) - return 0; - - priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (priv == NULL) - return -ENOMEM; - - priv->cpu = cpu; - priv->type = type; - priv->reg = reg; - priv->file = file; - mutex_lock(&cpu_debug_lock); - per_cpu(cpud_priv_arr[type], cpu) = priv; - per_cpu(cpud_priv_count, cpu)++; - mutex_unlock(&cpu_debug_lock); - - if (file) - debugfs_create_file(cpu_file[file].name, S_IRUGO, - dentry, (void *)priv, &cpu_fops); - else { - debugfs_create_file(cpu_base[type].name, S_IRUGO, - per_cpu(cpud_arr[type].dentry, cpu), - (void *)priv, &cpu_fops); - mutex_lock(&cpu_debug_lock); - per_cpu(cpud_arr[type].init, cpu) = 1; - mutex_unlock(&cpu_debug_lock); - } - - return 0; -} - -static int cpu_init_regfiles(unsigned cpu, unsigned int type, unsigned reg, - struct dentry *dentry) -{ - unsigned file; - int err = 0; - - for (file = 0; file < ARRAY_SIZE(cpu_file); file++) { - err = cpu_create_file(cpu, type, reg, file, dentry); - if (err) - return err; - } - - return err; -} - -static int cpu_init_msr(unsigned cpu, unsigned type, struct dentry *dentry) -{ - struct dentry *cpu_dentry = NULL; - unsigned reg, reg_min, reg_max; - int i, err = 0; - char reg_dir[12]; - u32 low, high; - - for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) { - if (!get_cpu_range(cpu, ®_min, ®_max, i, - cpu_base[type].flag)) - continue; - - for (reg = reg_min; reg <= reg_max; reg++) { - if (rdmsr_safe_on_cpu(cpu, reg, &low, &high)) - continue; - - sprintf(reg_dir, "0x%x", reg); - cpu_dentry = debugfs_create_dir(reg_dir, dentry); - err = cpu_init_regfiles(cpu, type, reg, cpu_dentry); - if (err) - return err; - } - } - - return err; -} - -static int cpu_init_allreg(unsigned cpu, struct dentry *dentry) -{ - struct dentry *cpu_dentry = NULL; - unsigned type; - int err = 0; - - for (type = 0; type < ARRAY_SIZE(cpu_base) - 1; type++) { - if (!is_typeflag_valid(cpu, cpu_base[type].flag)) - continue; - cpu_dentry = debugfs_create_dir(cpu_base[type].name, dentry); - per_cpu(cpud_arr[type].dentry, cpu) = cpu_dentry; - - if (type < CPU_TSS_BIT) - err = cpu_init_msr(cpu, type, cpu_dentry); - else - err = cpu_create_file(cpu, type, 0, CPU_INDEX_BIT, - cpu_dentry); - if (err) - return err; - } - - return err; -} - -static int cpu_init_cpu(void) -{ - struct dentry *cpu_dentry = NULL; - struct cpuinfo_x86 *cpui; - char cpu_dir[12]; - unsigned cpu; - int err = 0; - - for (cpu = 0; cpu < nr_cpu_ids; cpu++) { - cpui = &cpu_data(cpu); - if (!cpu_has(cpui, X86_FEATURE_MSR)) - continue; - - sprintf(cpu_dir, "cpu%d", cpu); - cpu_dentry = debugfs_create_dir(cpu_dir, cpu_debugfs_dir); - err = cpu_init_allreg(cpu, cpu_dentry); - - pr_info("cpu%d(%d) debug files %d\n", - cpu, nr_cpu_ids, per_cpu(cpud_priv_count, cpu)); - if (per_cpu(cpud_priv_count, cpu) > MAX_CPU_FILES) { - pr_err("Register files count %d exceeds limit %d\n", - per_cpu(cpud_priv_count, cpu), MAX_CPU_FILES); - per_cpu(cpud_priv_count, cpu) = MAX_CPU_FILES; - err = -ENFILE; - } - if (err) - return err; - } - - return err; -} - -static int __init cpu_debug_init(void) -{ - cpu_debugfs_dir = debugfs_create_dir("cpu", arch_debugfs_dir); - - return cpu_init_cpu(); -} - -static void __exit cpu_debug_exit(void) -{ - int i, cpu; - - if (cpu_debugfs_dir) - debugfs_remove_recursive(cpu_debugfs_dir); - - for (cpu = 0; cpu < nr_cpu_ids; cpu++) - for (i = 0; i < per_cpu(cpud_priv_count, cpu); i++) - kfree(per_cpu(cpud_priv_arr[i], cpu)); -} - -module_init(cpu_debug_init); -module_exit(cpu_debug_exit); - -MODULE_AUTHOR("Jaswinder Singh Rajput"); -MODULE_DESCRIPTION("CPU Debug module"); -MODULE_LICENSE("GPL"); diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c index cb27fd6..83e5e62 100644 --- a/arch/x86/kernel/cpuid.c +++ b/arch/x86/kernel/cpuid.c @@ -229,7 +229,7 @@ static void __exit cpuid_exit(void) for_each_online_cpu(cpu) cpuid_device_destroy(cpu); class_destroy(cpuid_class); - unregister_chrdev(CPUID_MAJOR, "cpu/cpuid"); + __unregister_chrdev(CPUID_MAJOR, 0, NR_CPUS, "cpu/cpuid"); unregister_hotcpu_notifier(&cpuid_class_cpu_notifier); } diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index ba6e658..ad80a1c 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -34,6 +34,8 @@ */ unsigned long hpet_address; u8 hpet_blockid; /* OS timer block num */ +u8 hpet_msi_disable; + #ifdef CONFIG_PCI_MSI static unsigned long hpet_num_timers; #endif @@ -596,6 +598,9 @@ static void hpet_msi_capability_lookup(unsigned int start_timer) unsigned int num_timers_used = 0; int i; + if (hpet_msi_disable) + return; + if (boot_cpu_has(X86_FEATURE_ARAT)) return; id = hpet_readl(HPET_ID); @@ -928,6 +933,9 @@ static __init int hpet_late_init(void) hpet_reserve_platform_timers(hpet_readl(HPET_ID)); hpet_print_config(); + if (hpet_msi_disable) + return 0; + if (boot_cpu_has(X86_FEATURE_ARAT)) return 0; diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 37542b67..e1af7c0 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -36,9 +36,6 @@ MODULE_LICENSE("GPL v2"); #define UCODE_EQUIV_CPU_TABLE_TYPE 0x00000000 #define UCODE_UCODE_TYPE 0x00000001 -const struct firmware *firmware; -static int supported_cpu; - struct equiv_cpu_entry { u32 installed_cpu; u32 fixed_errata_mask; @@ -77,12 +74,15 @@ static struct equiv_cpu_entry *equiv_cpu_table; static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig) { + struct cpuinfo_x86 *c = &cpu_data(cpu); u32 dummy; - if (!supported_cpu) - return -1; - memset(csig, 0, sizeof(*csig)); + if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) { + pr_warning("microcode: CPU%d: AMD CPU family 0x%x not " + "supported\n", cpu, c->x86); + return -1; + } rdmsr(MSR_AMD64_PATCH_LEVEL, csig->rev, dummy); pr_info("CPU%d: patch_level=0x%x\n", cpu, csig->rev); return 0; @@ -294,10 +294,14 @@ generic_load_microcode(int cpu, const u8 *data, size_t size) static enum ucode_state request_microcode_fw(int cpu, struct device *device) { + const char *fw_name = "amd-ucode/microcode_amd.bin"; + const struct firmware *firmware; enum ucode_state ret; - if (firmware == NULL) + if (request_firmware(&firmware, fw_name, device)) { + printk(KERN_ERR "microcode: failed to load file %s\n", fw_name); return UCODE_NFOUND; + } if (*(u32 *)firmware->data != UCODE_MAGIC) { pr_err("invalid UCODE_MAGIC (0x%08x)\n", @@ -307,6 +311,8 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device) ret = generic_load_microcode(cpu, firmware->data, firmware->size); + release_firmware(firmware); + return ret; } @@ -325,31 +331,7 @@ static void microcode_fini_cpu_amd(int cpu) uci->mc = NULL; } -void init_microcode_amd(struct device *device) -{ - const char *fw_name = "amd-ucode/microcode_amd.bin"; - struct cpuinfo_x86 *c = &boot_cpu_data; - - WARN_ON(c->x86_vendor != X86_VENDOR_AMD); - - if (c->x86 < 0x10) { - pr_warning("AMD CPU family 0x%x not supported\n", c->x86); - return; - } - supported_cpu = 1; - - if (request_firmware(&firmware, fw_name, device)) - pr_err("failed to load file %s\n", fw_name); -} - -void fini_microcode_amd(void) -{ - release_firmware(firmware); -} - static struct microcode_ops microcode_amd_ops = { - .init = init_microcode_amd, - .fini = fini_microcode_amd, .request_microcode_user = request_microcode_user, .request_microcode_fw = request_microcode_fw, .collect_cpu_info = collect_cpu_info_amd, diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index 0c86324..cceb5bc 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -521,9 +521,6 @@ static int __init microcode_init(void) return PTR_ERR(microcode_pdev); } - if (microcode_ops->init) - microcode_ops->init(µcode_pdev->dev); - get_online_cpus(); mutex_lock(µcode_mutex); @@ -566,9 +563,6 @@ static void __exit microcode_exit(void) platform_device_unregister(microcode_pdev); - if (microcode_ops->fini) - microcode_ops->fini(); - microcode_ops = NULL; pr_info("Microcode Update Driver: v" MICROCODE_VERSION " removed.\n"); diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c index 4bd93c9..206735a 100644 --- a/arch/x86/kernel/msr.c +++ b/arch/x86/kernel/msr.c @@ -285,7 +285,7 @@ static void __exit msr_exit(void) for_each_online_cpu(cpu) msr_device_destroy(cpu); class_destroy(msr_class); - unregister_chrdev(MSR_MAJOR, "cpu/msr"); + __unregister_chrdev(MSR_MAJOR, 0, NR_CPUS, "cpu/msr"); unregister_hotcpu_notifier(&msr_class_cpu_notifier); } diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 02c3ee0..c9b3522 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -115,18 +115,6 @@ void flush_thread(void) { struct task_struct *tsk = current; -#ifdef CONFIG_X86_64 - if (test_tsk_thread_flag(tsk, TIF_ABI_PENDING)) { - clear_tsk_thread_flag(tsk, TIF_ABI_PENDING); - if (test_tsk_thread_flag(tsk, TIF_IA32)) { - clear_tsk_thread_flag(tsk, TIF_IA32); - } else { - set_tsk_thread_flag(tsk, TIF_IA32); - current_thread_info()->status |= TS_COMPAT; - } - } -#endif - flush_ptrace_hw_breakpoint(tsk); memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array)); /* diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index f9e0331..41a26a8 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -521,6 +521,17 @@ void set_personality_64bit(void) current->personality &= ~READ_IMPLIES_EXEC; } +void set_personality_ia32(void) +{ + /* inherit personality from parent */ + + /* Make sure to be in 32bit mode */ + set_thread_flag(TIF_IA32); + + /* Prepare the first "return" to user space */ + current_thread_info()->status |= TS_COMPAT; +} + unsigned long get_wchan(struct task_struct *p) { unsigned long stack; diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index 18093d7..12e9fea 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -491,6 +491,19 @@ void force_hpet_resume(void) break; } } + +/* + * HPET MSI on some boards (ATI SB700/SB800) has side effect on + * floppy DMA. Disable HPET MSI on such platforms. + */ +static void force_disable_hpet_msi(struct pci_dev *unused) +{ + hpet_msi_disable = 1; +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, + force_disable_hpet_msi); + #endif #if defined(CONFIG_PCI) && defined(CONFIG_NUMA) diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index a271241..28c6876 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -229,9 +229,11 @@ update_nodes_add(int node, unsigned long start, unsigned long end) printk(KERN_ERR "SRAT: Hotplug zone not continuous. Partly ignored\n"); } - if (changed) + if (changed) { + node_set(node, cpu_nodes_parsed); printk(KERN_INFO "SRAT: hot plug zone found %Lx - %Lx\n", nd->start, nd->end); + } } /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */ diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile index 564b008..39fba37 100644 --- a/arch/x86/pci/Makefile +++ b/arch/x86/pci/Makefile @@ -15,7 +15,7 @@ obj-$(CONFIG_X86_NUMAQ) += numaq_32.o obj-y += common.o early.o obj-y += amd_bus.o -obj-$(CONFIG_X86_64) += bus_numa.o intel_bus.o +obj-$(CONFIG_X86_64) += bus_numa.o ifeq ($(CONFIG_PCI_DEBUG),y) EXTRA_CFLAGS += -DDEBUG diff --git a/arch/x86/pci/intel_bus.c b/arch/x86/pci/intel_bus.c deleted file mode 100644 index f81a2fa..0000000 --- a/arch/x86/pci/intel_bus.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * to read io range from IOH pci conf, need to do it after mmconfig is there - */ - -#include <linux/delay.h> -#include <linux/dmi.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <asm/pci_x86.h> - -#include "bus_numa.h" - -static inline void print_ioh_resources(struct pci_root_info *info) -{ - int res_num; - int busnum; - int i; - - printk(KERN_DEBUG "IOH bus: [%02x, %02x]\n", - info->bus_min, info->bus_max); - res_num = info->res_num; - busnum = info->bus_min; - for (i = 0; i < res_num; i++) { - struct resource *res; - - res = &info->res[i]; - printk(KERN_DEBUG "IOH bus: %02x index %x %s: [%llx, %llx]\n", - busnum, i, - (res->flags & IORESOURCE_IO) ? "io port" : - "mmio", - res->start, res->end); - } -} - -#define IOH_LIO 0x108 -#define IOH_LMMIOL 0x10c -#define IOH_LMMIOH 0x110 -#define IOH_LMMIOH_BASEU 0x114 -#define IOH_LMMIOH_LIMITU 0x118 -#define IOH_LCFGBUS 0x11c - -static void __devinit pci_root_bus_res(struct pci_dev *dev) -{ - u16 word; - u32 dword; - struct pci_root_info *info; - u16 io_base, io_end; - u32 mmiol_base, mmiol_end; - u64 mmioh_base, mmioh_end; - int bus_base, bus_end; - - /* some sys doesn't get mmconf enabled */ - if (dev->cfg_size < 0x120) - return; - - if (pci_root_num >= PCI_ROOT_NR) { - printk(KERN_DEBUG "intel_bus.c: PCI_ROOT_NR is too small\n"); - return; - } - - info = &pci_root_info[pci_root_num]; - pci_root_num++; - - pci_read_config_word(dev, IOH_LCFGBUS, &word); - bus_base = (word & 0xff); - bus_end = (word & 0xff00) >> 8; - sprintf(info->name, "PCI Bus #%02x", bus_base); - info->bus_min = bus_base; - info->bus_max = bus_end; - - pci_read_config_word(dev, IOH_LIO, &word); - io_base = (word & 0xf0) << (12 - 4); - io_end = (word & 0xf000) | 0xfff; - update_res(info, io_base, io_end, IORESOURCE_IO, 0); - - pci_read_config_dword(dev, IOH_LMMIOL, &dword); - mmiol_base = (dword & 0xff00) << (24 - 8); - mmiol_end = (dword & 0xff000000) | 0xffffff; - update_res(info, mmiol_base, mmiol_end, IORESOURCE_MEM, 0); - - pci_read_config_dword(dev, IOH_LMMIOH, &dword); - mmioh_base = ((u64)(dword & 0xfc00)) << (26 - 10); - mmioh_end = ((u64)(dword & 0xfc000000) | 0x3ffffff); - pci_read_config_dword(dev, IOH_LMMIOH_BASEU, &dword); - mmioh_base |= ((u64)(dword & 0x7ffff)) << 32; - pci_read_config_dword(dev, IOH_LMMIOH_LIMITU, &dword); - mmioh_end |= ((u64)(dword & 0x7ffff)) << 32; - update_res(info, mmioh_base, mmioh_end, IORESOURCE_MEM, 0); - - print_ioh_resources(info); -} - -/* intel IOH */ -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, pci_root_bus_res); |