aboutsummaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boot/compressed/head.S30
-rw-r--r--arch/arm/common/sa1111.c12
-rw-r--r--arch/arm/configs/s3c2410_defconfig119
-rw-r--r--arch/arm/mach-pxa/corgi_lcd.c2
-rw-r--r--arch/arm/mach-realview/core.h2
-rw-r--r--arch/arm/mach-realview/localtimer.c2
-rw-r--r--arch/arm/mach-realview/platsmp.c3
-rw-r--r--arch/arm/mach-s3c2410/mach-bast.c28
-rw-r--r--arch/arm/plat-omap/dmtimer.c2
-rw-r--r--arch/arm/plat-omap/ocpi.c2
-rw-r--r--arch/arm/plat-omap/pm.c2
-rw-r--r--arch/arm/plat-omap/sram-fn.S2
12 files changed, 137 insertions, 69 deletions
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 7c7f475..6abafb6 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -19,38 +19,28 @@
*/
#ifdef DEBUG
-#include <asm/arch/debug-macro.S>
-
#if defined(CONFIG_DEBUG_ICEDCC)
.macro loadsp, rb
.endm
- .macro writeb, ch, rb
+ .macro writeb, ch, rb
mcr p14, 0, \ch, c0, c1, 0
.endm
#else
+
+#include <asm/arch/debug-macro.S>
+
.macro writeb, ch, rb
senduart \ch, \rb
.endm
-#if defined(CONFIG_FOOTBRIDGE) || \
- defined(CONFIG_ARCH_RPC) || \
- defined(CONFIG_ARCH_INTEGRATOR) || \
- defined(CONFIG_ARCH_PXA) || \
- defined(CONFIG_ARCH_IXP4XX) || \
- defined(CONFIG_ARCH_IXP2000) || \
- defined(CONFIG_ARCH_LH7A40X) || \
- defined(CONFIG_ARCH_OMAP)
- .macro loadsp, rb
- addruart \rb
- .endm
-#elif defined(CONFIG_ARCH_SA1100)
+#if defined(CONFIG_ARCH_SA1100)
.macro loadsp, rb
mov \rb, #0x80000000 @ physical base address
-# if defined(CONFIG_DEBUG_LL_SER3)
+#ifdef CONFIG_DEBUG_LL_SER3
add \rb, \rb, #0x00050000 @ Ser3
-# else
+#else
add \rb, \rb, #0x00010000 @ Ser1
-# endif
+#endif
.endm
#elif defined(CONFIG_ARCH_IOP331)
.macro loadsp, rb
@@ -64,7 +54,9 @@
add \rb, \rb, #0x4000 * CONFIG_S3C2410_LOWLEVEL_UART_PORT
.endm
#else
-#error no serial architecture defined
+ .macro loadsp, rb
+ addruart \rb
+ .endm
#endif
#endif
#endif
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 39a6eea..d0d6e6d 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -32,6 +32,7 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
+#include <asm/sizes.h>
#include <asm/hardware/sa1111.h>
@@ -132,6 +133,17 @@ static struct sa1111_dev_info sa1111_devices[] = {
},
};
+void __init sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes)
+{
+ unsigned int sz = SZ_1M >> PAGE_SHIFT;
+
+ if (node != 0)
+ sz = 0;
+
+ size[1] = size[0] - sz;
+ size[0] = sz;
+}
+
/*
* SA1111 interrupt support. Since clearing an IRQ while there are
* active IRQs causes the interrupt output to pulse, the upper levels
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 756348b..3f97590 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-git8
-# Thu Sep 8 19:24:02 2005
+# Linux kernel version: 2.6.15-rc1
+# Sun Nov 13 17:41:24 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@@ -62,6 +62,23 @@ CONFIG_OBSOLETE_MODPARM=y
CONFIG_KMOD=y
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
@@ -83,6 +100,7 @@ CONFIG_ARCH_S3C2410=y
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
@@ -108,6 +126,7 @@ CONFIG_CPU_S3C2440=y
# S3C2410 Boot
#
# CONFIG_S3C2410_BOOT_WATCHDOG is not set
+# CONFIG_S3C2410_BOOT_ERROR_RESET is not set
#
# S3C2410 Setup
@@ -142,6 +161,7 @@ CONFIG_CPU_TLB_V4WBI=y
#
# Bus support
#
+CONFIG_ISA=y
CONFIG_ISA_DMA_API=y
#
@@ -152,7 +172,6 @@ CONFIG_ISA_DMA_API=y
#
# Kernel Features
#
-# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
@@ -163,6 +182,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
@@ -253,6 +273,10 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
@@ -260,7 +284,6 @@ CONFIG_TCP_CONG_BIC=y
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
@@ -300,6 +323,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
@@ -335,7 +359,6 @@ CONFIG_MTD_ROM=y
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_IMPA7 is not set
CONFIG_MTD_BAST=y
CONFIG_MTD_BAST_MAXSIZE=4
@@ -370,6 +393,11 @@ CONFIG_MTD_NAND_S3C2410=y
# CONFIG_MTD_NAND_NANDSIM is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
CONFIG_PARPORT=y
@@ -381,10 +409,12 @@ CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
+# CONFIG_PNP is not set
#
# Block devices
#
+# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
@@ -395,14 +425,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
@@ -428,6 +450,7 @@ CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_IDE_GENERIC=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDE_BAST=y
+# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
@@ -467,6 +490,11 @@ CONFIG_NETDEVICES=y
# CONFIG_TUN is not set
#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
# PHY device support
#
# CONFIG_PHYLIB is not set
@@ -475,9 +503,19 @@ CONFIG_NETDEVICES=y
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_MII=y
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
-CONFIG_DM9000=m
+CONFIG_DM9000=y
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
@@ -490,6 +528,7 @@ CONFIG_DM9000=m
#
# Token Ring devices
#
+# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
@@ -542,6 +581,9 @@ CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
@@ -568,6 +610,7 @@ CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
+# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
@@ -590,6 +633,10 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
+# CONFIG_SERIAL_8250_FOURPORT is not set
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
#
# Non-8250 serial port support
@@ -622,6 +669,13 @@ CONFIG_WATCHDOG=y
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_S3C2410_WATCHDOG=y
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
CONFIG_S3C2410_RTC=y
@@ -636,6 +690,7 @@ CONFIG_S3C2410_RTC=y
#
# TPM devices
#
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -653,6 +708,7 @@ CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
+# CONFIG_I2C_ELEKTOR is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
@@ -671,6 +727,7 @@ CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -737,22 +794,28 @@ CONFIG_SENSORS_LM85=m
# Graphics support
#
CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_S3C2410=y
+# CONFIG_FB_S3C2410_DEBUG is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
#
# Logo configuration
@@ -773,6 +836,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -798,10 +865,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
@@ -810,6 +873,7 @@ CONFIG_INOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -854,6 +918,7 @@ CONFIG_JFFS_FS_VERBOSE=0
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@@ -884,6 +949,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -959,7 +1025,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
@@ -970,7 +1036,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
# CONFIG_DEBUG_ERRORS is not set
@@ -998,6 +1066,7 @@ CONFIG_DEBUG_S3C2410_UART=0
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
index 698eb06..6dbcaf1 100644
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -22,7 +22,7 @@
#include <linux/string.h>
#include <asm/arch/akita.h>
#include <asm/arch/corgi.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/sharpsl.h>
#include <asm/arch/spitz.h>
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index d83e8ba..c06e604 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -26,8 +26,6 @@
#include <asm/leds.h>
#include <asm/io.h>
-#define __io_address(n) __io(IO_ADDRESS(n))
-
extern struct sys_timer realview_timer;
#define AMBA_DEVICE(name,busid,base,plat) \
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
index 5e917e3..c9d7c59 100644
--- a/arch/arm/mach-realview/localtimer.c
+++ b/arch/arm/mach-realview/localtimer.c
@@ -21,8 +21,6 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include "core.h"
-
#define TWD_BASE(cpu) (__io_address(REALVIEW_TWD_BASE) + \
((cpu) * REALVIEW_TWD_SIZE))
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 0c7d4ac..a8fbd76d 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -17,8 +17,7 @@
#include <asm/cacheflush.h>
#include <asm/hardware/arm_scu.h>
#include <asm/hardware.h>
-
-#include "core.h"
+#include <asm/io.h>
extern void realview_secondary_startup(void);
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 1be2567..4d96271 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -203,7 +203,7 @@ static struct s3c24xx_uart_clksrc bast_serial_clocks[] = {
.name = "pclk",
.divisor = 1,
.min_baud = 0,
- .max_baud = 0.
+ .max_baud = 0,
}
};
@@ -216,7 +216,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = {
.ulcon = ULCON,
.ufcon = UFCON,
.clocks = bast_serial_clocks,
- .clocks_size = ARRAY_SIZE(bast_serial_clocks)
+ .clocks_size = ARRAY_SIZE(bast_serial_clocks),
},
[1] = {
.hwport = 1,
@@ -225,7 +225,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = {
.ulcon = ULCON,
.ufcon = UFCON,
.clocks = bast_serial_clocks,
- .clocks_size = ARRAY_SIZE(bast_serial_clocks)
+ .clocks_size = ARRAY_SIZE(bast_serial_clocks),
},
/* port 2 is not actually used */
[2] = {
@@ -235,7 +235,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = {
.ulcon = ULCON,
.ufcon = UFCON,
.clocks = bast_serial_clocks,
- .clocks_size = ARRAY_SIZE(bast_serial_clocks)
+ .clocks_size = ARRAY_SIZE(bast_serial_clocks),
}
};
@@ -268,7 +268,7 @@ static struct mtd_partition bast_default_nand_part[] = {
[0] = {
.name = "Boot Agent",
.size = SZ_16K,
- .offset = 0
+ .offset = 0,
},
[1] = {
.name = "/boot",
@@ -296,28 +296,28 @@ static struct s3c2410_nand_set bast_nand_sets[] = {
.nr_chips = 1,
.nr_map = smartmedia_map,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
- .partitions = bast_default_nand_part
+ .partitions = bast_default_nand_part,
},
[1] = {
.name = "chip0",
.nr_chips = 1,
.nr_map = chip0_map,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
- .partitions = bast_default_nand_part
+ .partitions = bast_default_nand_part,
},
[2] = {
.name = "chip1",
.nr_chips = 1,
.nr_map = chip1_map,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
- .partitions = bast_default_nand_part
+ .partitions = bast_default_nand_part,
},
[3] = {
.name = "chip2",
.nr_chips = 1,
.nr_map = chip2_map,
.nr_partitions = ARRAY_SIZE(bast_default_nand_part),
- .partitions = bast_default_nand_part
+ .partitions = bast_default_nand_part,
}
};
@@ -355,17 +355,17 @@ static struct resource bast_dm9k_resource[] = {
[0] = {
.start = S3C2410_CS5 + BAST_PA_DM9000,
.end = S3C2410_CS5 + BAST_PA_DM9000 + 3,
- .flags = IORESOURCE_MEM
+ .flags = IORESOURCE_MEM,
},
[1] = {
.start = S3C2410_CS5 + BAST_PA_DM9000 + 0x40,
.end = S3C2410_CS5 + BAST_PA_DM9000 + 0x40 + 0x3f,
- .flags = IORESOURCE_MEM
+ .flags = IORESOURCE_MEM,
},
[2] = {
.start = IRQ_DM9000,
.end = IRQ_DM9000,
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ,
}
};
@@ -375,7 +375,7 @@ static struct resource bast_dm9k_resource[] = {
*/
static struct dm9000_plat_data bast_dm9k_platdata = {
- .flags = DM9000_PLATF_16BITONLY
+ .flags = DM9000_PLATF_16BITONLY,
};
static struct platform_device bast_device_dm9k = {
@@ -492,7 +492,7 @@ static struct s3c24xx_board bast_board __initdata = {
.devices = bast_devices,
.devices_count = ARRAY_SIZE(bast_devices),
.clocks = bast_clocks,
- .clocks_count = ARRAY_SIZE(bast_clocks)
+ .clocks_count = ARRAY_SIZE(bast_clocks),
};
static void __init bast_map_io(void)
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index a1468d7..38d7ebf 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -26,7 +26,7 @@
*/
#include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#include <asm/arch/dmtimer.h>
#include <asm/io.h>
#include <asm/arch/irqs.h>
diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c
index 2ede2ee..b861482 100644
--- a/arch/arm/plat-omap/ocpi.c
+++ b/arch/arm/plat-omap/ocpi.c
@@ -34,7 +34,7 @@
#include <asm/io.h>
#include <asm/hardware/clock.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#define OCPI_BASE 0xfffec320
#define OCPI_FAULT (OCPI_BASE + 0x00)
diff --git a/arch/arm/plat-omap/pm.c b/arch/arm/plat-omap/pm.c
index 966cca03..1a24e2c 100644
--- a/arch/arm/plat-omap/pm.c
+++ b/arch/arm/plat-omap/pm.c
@@ -509,7 +509,7 @@ static void omap_pm_init_proc(void)
* @state: suspend state we're entering.
*
*/
-//#include <asm/arch/hardware.h>
+//#include <asm/hardware.h>
static int omap_pm_prepare(suspend_state_t state)
{
diff --git a/arch/arm/plat-omap/sram-fn.S b/arch/arm/plat-omap/sram-fn.S
index 4bea369..66414cc 100644
--- a/arch/arm/plat-omap/sram-fn.S
+++ b/arch/arm/plat-omap/sram-fn.S
@@ -12,7 +12,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
.text