aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_artop.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_artop.c')
-rw-r--r--drivers/ata/pata_artop.c112
1 files changed, 60 insertions, 52 deletions
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 2215632..4b8b22e 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -2,7 +2,7 @@
* pata_artop.c - ARTOP ATA controller driver
*
* (C) 2006 Red Hat
- * (C) 2007 Bartlomiej Zolnierkiewicz
+ * (C) 2007,2011 Bartlomiej Zolnierkiewicz
*
* Based in part on drivers/ide/pci/aec62xx.c
* Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org>
@@ -28,7 +28,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_artop"
-#define DRV_VERSION "0.4.5"
+#define DRV_VERSION "0.4.6"
/*
* The ARTOP has 33 Mhz and "over clocked" timing tables. Until we
@@ -39,31 +39,15 @@
static int clock = 0;
-static int artop6210_pre_reset(struct ata_link *link, unsigned long deadline)
-{
- struct ata_port *ap = link->ap;
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- const struct pci_bits artop_enable_bits[] = {
- { 0x4AU, 1U, 0x02UL, 0x02UL }, /* port 0 */
- { 0x4AU, 1U, 0x04UL, 0x04UL }, /* port 1 */
- };
-
- if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
- return -ENOENT;
-
- return ata_sff_prereset(link, deadline);
-}
-
/**
- * artop6260_pre_reset - check for 40/80 pin
+ * artop62x0_pre_reset - probe begin
* @link: link
* @deadline: deadline jiffies for the operation
*
- * The ARTOP hardware reports the cable detect bits in register 0x49.
* Nothing complicated needed here.
*/
-static int artop6260_pre_reset(struct ata_link *link, unsigned long deadline)
+static int artop62x0_pre_reset(struct ata_link *link, unsigned long deadline)
{
static const struct pci_bits artop_enable_bits[] = {
{ 0x4AU, 1U, 0x02UL, 0x02UL }, /* port 0 */
@@ -73,7 +57,7 @@ static int artop6260_pre_reset(struct ata_link *link, unsigned long deadline)
struct ata_port *ap = link->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- /* Odd numbered device ids are the units with enable bits (the -R cards) */
+ /* Odd numbered device ids are the units with enable bits. */
if ((pdev->device & 1) &&
!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
return -ENOENT;
@@ -317,7 +301,7 @@ static struct ata_port_operations artop6210_ops = {
.cable_detect = ata_cable_40wire,
.set_piomode = artop6210_set_piomode,
.set_dmamode = artop6210_set_dmamode,
- .prereset = artop6210_pre_reset,
+ .prereset = artop62x0_pre_reset,
.qc_defer = artop6210_qc_defer,
};
@@ -326,9 +310,36 @@ static struct ata_port_operations artop6260_ops = {
.cable_detect = artop6260_cable_detect,
.set_piomode = artop6260_set_piomode,
.set_dmamode = artop6260_set_dmamode,
- .prereset = artop6260_pre_reset,
+ .prereset = artop62x0_pre_reset,
};
+static void atp8xx_fixup(struct pci_dev *pdev)
+{
+ if (pdev->device == 0x0005)
+ /* BIOS may have left us in UDMA, clear it before libata probe */
+ pci_write_config_byte(pdev, 0x54, 0);
+ else if (pdev->device == 0x0008 || pdev->device == 0x0009) {
+ u8 reg;
+
+ /* Mac systems come up with some registers not set as we
+ will need them */
+
+ /* Clear reset & test bits */
+ pci_read_config_byte(pdev, 0x49, &reg);
+ pci_write_config_byte(pdev, 0x49, reg & ~0x30);
+
+ /* PCI latency must be > 0x80 for burst mode, tweak it
+ * if required.
+ */
+ pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &reg);
+ if (reg <= 0x80)
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x90);
+
+ /* Enable IRQ output and burst mode */
+ pci_read_config_byte(pdev, 0x4a, &reg);
+ pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80);
+ }
+}
/**
* artop_init_one - Register ARTOP ATA PCI device with kernel services
@@ -346,7 +357,6 @@ static struct ata_port_operations artop6260_ops = {
static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
{
- static int printed_version;
static const struct ata_port_info info_6210 = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
@@ -378,50 +388,28 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
const struct ata_port_info *ppi[] = { NULL, NULL };
int rc;
- if (!printed_version++)
- dev_printk(KERN_DEBUG, &pdev->dev,
- "version " DRV_VERSION "\n");
+ ata_print_version_once(&pdev->dev, DRV_VERSION);
rc = pcim_enable_device(pdev);
if (rc)
return rc;
- if (id->driver_data == 0) { /* 6210 variant */
+ if (id->driver_data == 0) /* 6210 variant */
ppi[0] = &info_6210;
- /* BIOS may have left us in UDMA, clear it before libata probe */
- pci_write_config_byte(pdev, 0x54, 0);
- }
else if (id->driver_data == 1) /* 6260 */
ppi[0] = &info_626x;
else if (id->driver_data == 2) { /* 6280 or 6280 + fast */
unsigned long io = pci_resource_start(pdev, 4);
- u8 reg;
ppi[0] = &info_628x;
if (inb(io) & 0x10)
ppi[0] = &info_628x_fast;
- /* Mac systems come up with some registers not set as we
- will need them */
-
- /* Clear reset & test bits */
- pci_read_config_byte(pdev, 0x49, &reg);
- pci_write_config_byte(pdev, 0x49, reg & ~ 0x30);
-
- /* PCI latency must be > 0x80 for burst mode, tweak it
- * if required.
- */
- pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &reg);
- if (reg <= 0x80)
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x90);
-
- /* Enable IRQ output and burst mode */
- pci_read_config_byte(pdev, 0x4a, &reg);
- pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80);
-
}
BUG_ON(ppi[0] == NULL);
+ atp8xx_fixup(pdev);
+
return ata_pci_bmdma_init_one(pdev, ppi, &artop_sht, NULL, 0);
}
@@ -435,11 +423,32 @@ static const struct pci_device_id artop_pci_tbl[] = {
{ } /* terminate list */
};
+#ifdef CONFIG_PM
+static int atp8xx_reinit_one(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ atp8xx_fixup(pdev);
+
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
static struct pci_driver artop_pci_driver = {
.name = DRV_NAME,
.id_table = artop_pci_tbl,
.probe = artop_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = atp8xx_reinit_one,
+#endif
};
static int __init artop_init(void)
@@ -455,9 +464,8 @@ static void __exit artop_exit(void)
module_init(artop_init);
module_exit(artop_exit);
-MODULE_AUTHOR("Alan Cox");
+MODULE_AUTHOR("Alan Cox, Bartlomiej Zolnierkiewicz");
MODULE_DESCRIPTION("SCSI low-level driver for ARTOP PATA");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, artop_pci_tbl);
MODULE_VERSION(DRV_VERSION);
-