diff options
Diffstat (limited to 'drivers/ata/sata_sis.c')
| -rw-r--r-- | drivers/ata/sata_sis.c | 347 |
1 files changed, 347 insertions, 0 deletions
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c new file mode 100644 index 0000000..ac24f66 --- /dev/null +++ b/drivers/ata/sata_sis.c @@ -0,0 +1,347 @@ +/* + * sata_sis.c - Silicon Integrated Systems SATA + * + * Maintained by: Uwe Koziolek + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2004 Uwe Koziolek + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available under NDA. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "sata_sis" +#define DRV_VERSION "0.6" + +enum { + sis_180 = 0, + SIS_SCR_PCI_BAR = 5, + + /* PCI configuration registers */ + SIS_GENCTL = 0x54, /* IDE General Control register */ + SIS_SCR_BASE = 0xc0, /* sata0 phy SCR registers */ + SIS180_SATA1_OFS = 0x10, /* offset from sata0->sata1 phy regs */ + SIS182_SATA1_OFS = 0x20, /* offset from sata0->sata1 phy regs */ + SIS_PMR = 0x90, /* port mapping register */ + SIS_PMR_COMBINED = 0x30, + + /* random bits */ + SIS_FLAG_CFGSCR = (1 << 30), /* host flag: SCRs via PCI cfg */ + + GENCTL_IOMAPPED_SCR = (1 << 26), /* if set, SCRs are in IO space */ +}; + +static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); +static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg); +static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); + +static const struct pci_device_id sis_pci_tbl[] = { + { PCI_VENDOR_ID_SI, 0x180, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 }, + { PCI_VENDOR_ID_SI, 0x181, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 }, + { PCI_VENDOR_ID_SI, 0x182, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 }, + { } /* terminate list */ +}; + + +static struct pci_driver sis_pci_driver = { + .name = DRV_NAME, + .id_table = sis_pci_tbl, + .probe = sis_init_one, + .remove = ata_pci_remove_one, +}; + +static struct scsi_host_template sis_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = ATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations sis_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .scr_read = sis_scr_read, + .scr_write = sis_scr_write, + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + +static struct ata_port_info sis_port_info = { + .sht = &sis_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .pio_mask = 0x1f, + .mwdma_mask = 0x7, + .udma_mask = 0x7f, + .port_ops = &sis_ops, +}; + + +MODULE_AUTHOR("Uwe Koziolek"); +MODULE_DESCRIPTION("low-level driver for Silicon Integratad Systems SATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sis_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg, int device) +{ + unsigned int addr = SIS_SCR_BASE + (4 * sc_reg); + + if (port_no) { + if (device == 0x182) + addr += SIS182_SATA1_OFS; + else + addr += SIS180_SATA1_OFS; + } + + return addr; +} + +static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg) +{ + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg, pdev->device); + u32 val, val2 = 0; + u8 pmr; + + if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */ + return 0xffffffff; + + pci_read_config_byte(pdev, SIS_PMR, &pmr); + + pci_read_config_dword(pdev, cfg_addr, &val); + + if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) + pci_read_config_dword(pdev, cfg_addr+0x10, &val2); + + return val|val2; +} + +static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val) +{ + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr, pdev->device); + u8 pmr; + + if (scr == SCR_ERROR) /* doesn't exist in PCI cfg space */ + return; + + pci_read_config_byte(pdev, SIS_PMR, &pmr); + + pci_write_config_dword(pdev, cfg_addr, val); + + if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) + pci_write_config_dword(pdev, cfg_addr+0x10, val); +} + +static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg) +{ + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + u32 val, val2 = 0; + u8 pmr; + + if (sc_reg > SCR_CONTROL) + return 0xffffffffU; + + if (ap->flags & SIS_FLAG_CFGSCR) + return sis_scr_cfg_read(ap, sc_reg); + + pci_read_config_byte(pdev, SIS_PMR, &pmr); + + val = inl(ap->ioaddr.scr_addr + (sc_reg * 4)); + + if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) + val2 = inl(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10); + + return val | val2; +} + +static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) +{ + struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); + u8 pmr; + + if (sc_reg > SCR_CONTROL) + return; + + pci_read_config_byte(pdev, SIS_PMR, &pmr); + + if (ap->flags & SIS_FLAG_CFGSCR) + sis_scr_cfg_write(ap, sc_reg, val); + else { + outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)); + if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED)) + outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)+0x10); + } +} + +static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_probe_ent *probe_ent = NULL; + int rc; + u32 genctl; + struct ata_port_info *ppi; + int pci_dev_busy = 0; + u8 pmr; + u8 port2_start; + + if (!printed_version++) + dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) { + pci_dev_busy = 1; + goto err_out; + } + + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + goto err_out_regions; + + ppi = &sis_port_info; + probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); + if (!probe_ent) { + rc = -ENOMEM; + goto err_out_regions; + } + + /* check and see if the SCRs are in IO space or PCI cfg space */ + pci_read_config_dword(pdev, SIS_GENCTL, &genctl); + if ((genctl & GENCTL_IOMAPPED_SCR) == 0) + probe_ent->host_flags |= SIS_FLAG_CFGSCR; + + /* if hardware thinks SCRs are in IO space, but there are + * no IO resources assigned, change to PCI cfg space. + */ + if ((!(probe_ent->host_flags & SIS_FLAG_CFGSCR)) && + ((pci_resource_start(pdev, SIS_SCR_PCI_BAR) == 0) || + (pci_resource_len(pdev, SIS_SCR_PCI_BAR) < 128))) { + genctl &= ~GENCTL_IOMAPPED_SCR; + pci_write_config_dword(pdev, SIS_GENCTL, genctl); + probe_ent->host_flags |= SIS_FLAG_CFGSCR; + } + + pci_read_config_byte(pdev, SIS_PMR, &pmr); + if (ent->device != 0x182) { + if ((pmr & SIS_PMR_COMBINED) == 0) { + dev_printk(KERN_INFO, &pdev->dev, + "Detected SiS 180/181 chipset in SATA mode\n"); + port2_start = 64; + } + else { + dev_printk(KERN_INFO, &pdev->dev, + "Detected SiS 180/181 chipset in combined mode\n"); + port2_start=0; + } + } + else { + dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182 chipset\n"); + port2_start = 0x20; + } + + if (!(probe_ent->host_flags & SIS_FLAG_CFGSCR)) { + probe_ent->port[0].scr_addr = + pci_resource_start(pdev, SIS_SCR_PCI_BAR); + probe_ent->port[1].scr_addr = + pci_resource_start(pdev, SIS_SCR_PCI_BAR) + port2_start; + } + + pci_set_master(pdev); + pci_intx(pdev, 1); + + /* FIXME: check ata_device_add return value */ + ata_device_add(probe_ent); + kfree(probe_ent); + + return 0; + +err_out_regions: + pci_release_regions(pdev); + +err_out: + if (!pci_dev_busy) + pci_disable_device(pdev); + return rc; + +} + +static int __init sis_init(void) +{ + return pci_register_driver(&sis_pci_driver); +} + +static void __exit sis_exit(void) +{ + pci_unregister_driver(&sis_pci_driver); +} + +module_init(sis_init); +module_exit(sis_exit); + |